From a91be22c9222061281a380bd3f38ec9281919a2c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 3 Dec 2013 11:12:24 +0900 Subject: ARM: shmobile: r8a7778: add SSIx DMAEngine support Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7778.h | 18 ++++++++++ arch/arm/mach-shmobile/setup-r8a7778.c | 51 +++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index b497f93..a3440e5 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -27,6 +27,24 @@ enum { HPBDMA_SLAVE_DUMMY, HPBDMA_SLAVE_SDHI0_TX, HPBDMA_SLAVE_SDHI0_RX, + HPBDMA_SLAVE_SSI0_TX, + HPBDMA_SLAVE_SSI0_RX, + HPBDMA_SLAVE_SSI1_TX, + HPBDMA_SLAVE_SSI1_RX, + HPBDMA_SLAVE_SSI2_TX, + HPBDMA_SLAVE_SSI2_RX, + HPBDMA_SLAVE_SSI3_TX, + HPBDMA_SLAVE_SSI3_RX, + HPBDMA_SLAVE_SSI4_TX, + HPBDMA_SLAVE_SSI4_RX, + HPBDMA_SLAVE_SSI5_TX, + HPBDMA_SLAVE_SSI5_RX, + HPBDMA_SLAVE_SSI6_TX, + HPBDMA_SLAVE_SSI6_RX, + HPBDMA_SLAVE_SSI7_TX, + HPBDMA_SLAVE_SSI7_RX, + HPBDMA_SLAVE_SSI8_TX, + HPBDMA_SLAVE_SSI8_RX, HPBDMA_SLAVE_HPBIF0_TX, HPBDMA_SLAVE_HPBIF0_RX, HPBDMA_SLAVE_HPBIF1_TX, diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 81701cf..e786338 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -319,6 +319,29 @@ void __init r8a7778_add_dt_devices(void) #define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ #define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ +#define HPBDMA_SSI(_id) \ +{ \ + .id = HPBDMA_SLAVE_SSI## _id ##_TX, \ + .addr = 0xffd91008 + (_id * 0x40), \ + .dcr = HPB_DMAE_DCR_CT | \ + HPB_DMAE_DCR_DIP | \ + HPB_DMAE_DCR_SPDS_32BIT | \ + HPB_DMAE_DCR_DMDL | \ + HPB_DMAE_DCR_DPDS_32BIT, \ + .port = _id + (_id << 8), \ + .dma_ch = (28 + _id), \ +}, { \ + .id = HPBDMA_SLAVE_SSI## _id ##_RX, \ + .addr = 0xffd9100c + (_id * 0x40), \ + .dcr = HPB_DMAE_DCR_CT | \ + HPB_DMAE_DCR_DIP | \ + HPB_DMAE_DCR_SMDL | \ + HPB_DMAE_DCR_SPDS_32BIT | \ + HPB_DMAE_DCR_DPDS_32BIT, \ + .port = _id + (_id << 8), \ + .dma_ch = (28 + _id), \ +} + #define HPBDMA_HPBIF(_id) \ { \ .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \ @@ -373,6 +396,16 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { .dma_ch = 22, }, + HPBDMA_SSI(0), + HPBDMA_SSI(1), + HPBDMA_SSI(2), + HPBDMA_SSI(3), + HPBDMA_SSI(4), + HPBDMA_SSI(5), + HPBDMA_SSI(6), + HPBDMA_SSI(7), + HPBDMA_SSI(8), + HPBDMA_HPBIF(0), HPBDMA_HPBIF(1), HPBDMA_HPBIF(2), @@ -387,22 +420,40 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { static const struct hpb_dmae_channel hpb_dmae_channels[] = { HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */ + HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */ }; -- cgit v1.1 From b448c904f5058b6cd35bf1a43ca219dcfeca4da6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 28 Nov 2013 19:02:12 -0800 Subject: ARM: shmobile: r8a7790: add I2C support Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7790.c | 4 ++++ arch/arm/mach-shmobile/setup-r8a7790.c | 25 +++++++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 36c8917..b6ecea3 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -292,9 +292,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]), + CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]), CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]), + CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]), CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]), + CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]), CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]), + CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]), CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c47bcebb..1a11e26 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -63,6 +63,27 @@ R8A7790_GPIO(5); &r8a7790_gpio##idx##_platform_data, \ sizeof(r8a7790_gpio##idx##_platform_data)) +static struct resource i2c_resources[] __initdata = { + /* I2C0 */ + DEFINE_RES_MEM(0xE6508000, 0x40), + DEFINE_RES_IRQ(gic_spi(287)), + /* I2C1 */ + DEFINE_RES_MEM(0xE6518000, 0x40), + DEFINE_RES_IRQ(gic_spi(288)), + /* I2C2 */ + DEFINE_RES_MEM(0xE6530000, 0x40), + DEFINE_RES_IRQ(gic_spi(286)), + /* I2C3 */ + DEFINE_RES_MEM(0xE6540000, 0x40), + DEFINE_RES_IRQ(gic_spi(290)), + +}; + +#define r8a7790_register_i2c(idx) \ + platform_device_register_simple( \ + "i2c-rcar", idx, \ + i2c_resources + (2 * idx), 2); \ + void __init r8a7790_pinmux_init(void) { platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, @@ -73,6 +94,10 @@ void __init r8a7790_pinmux_init(void) r8a7790_register_gpio(3); r8a7790_register_gpio(4); r8a7790_register_gpio(5); + r8a7790_register_i2c(0); + r8a7790_register_i2c(1); + r8a7790_register_i2c(2); + r8a7790_register_i2c(3); } #define SCIF_COMMON(scif_type, baseaddr, irq) \ -- cgit v1.1 From e1c98c5db947cbb934b8fb0a2faf5eafd9c035cc Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 4 Dec 2013 17:32:42 -0800 Subject: ARM: shmobile: sh73a0: add FSI clock support for DT Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-sh73a0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index c92c023..5e6a056 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -658,6 +658,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ + CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ -- cgit v1.1 From 02d39132e75410633c637be006b9b772a6116da3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 5 Dec 2013 18:09:30 -0800 Subject: ARM: shmobile: r8a7778: camera-rcar header cleanup is needed on BockW, not setup-r8a7778.c Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw.c | 1 + arch/arm/mach-shmobile/include/mach/r8a7778.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 38611526..44b55ef 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index a3440e5..72c9d37 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -20,7 +20,6 @@ #define __ASM_R8A7778_H__ #include -#include /* HPB-DMA slave IDs */ enum { -- cgit v1.1 From 893c3f0bc55e749124f14b02eee9510147fefd90 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 8 Dec 2013 23:50:36 +0300 Subject: ARM: shmobile: r8a7791: add Ether clock Add support for R8A7791 Ether clock. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7791.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index ff2d60d5..f546126 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -122,6 +122,7 @@ static struct clk *main_clks[] = { /* MSTP */ enum { + MSTP813, MSTP726, MSTP724, MSTP723, MSTP721, MSTP720, MSTP719, MSTP718, MSTP715, MSTP714, MSTP522, @@ -132,6 +133,7 @@ enum { }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */ [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */ [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */ [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */ @@ -192,6 +194,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), + CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */ }; #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ -- cgit v1.1 From 0fe35077a92ce45acfa2b7259bba516757fb0c3f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 11 Dec 2013 10:07:42 +0000 Subject: ARM: rcar-gen2: Do not setup timer in non-secure mode If the system has been started in non-secure mode, then the ARM generic timer is not configurable during the kernel initialisation. Currently the only thing we can check for is if the timer has been correctly configured during the boot process. Signed-off-by: Ben Dooks Reviewed-by: Ian Molton Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-rcar-gen2.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 5734c24..b6275ab 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -78,12 +78,23 @@ void __init rcar_gen2_timer_init(void) /* Remap "armgcnt address map" space */ base = ioremap(0xe6080000, PAGE_SIZE); - /* Update registers with correct frequency */ - iowrite32(freq, base + CNTFID0); - asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + /* + * Update the timer if it is either not running, or is not at the + * right frequency. The timer is only configurable in secure mode + * so this avoids an abort if the loader started the timer and + * entered the kernel in non-secure mode. + */ + + if ((ioread32(base + CNTCR) & 1) == 0 || + ioread32(base + CNTFID0) != freq) { + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + } - /* make sure arch timer is started by setting bit 0 of CNTCR */ - iowrite32(1, base + CNTCR); iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ -- cgit v1.1 From aa9938644c63100219c252b9d330b95427082cef Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Dec 2013 16:51:04 -0800 Subject: ARM: shmobile: r8a7778: add USB Func DMAEngine support HPB-DMAC has 2 channel for USB Func (= D0/D1) D0 is used as Tx, D1 is used as Rx on this patch Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7778.h | 2 ++ arch/arm/mach-shmobile/setup-r8a7778.c | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 72c9d37..f4076a5 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -62,6 +62,8 @@ enum { HPBDMA_SLAVE_HPBIF7_RX, HPBDMA_SLAVE_HPBIF8_TX, HPBDMA_SLAVE_HPBIF8_RX, + HPBDMA_SLAVE_USBFUNC_TX, + HPBDMA_SLAVE_USBFUNC_RX, }; extern void r8a7778_add_standard_devices(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index e786338..7ea6308 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -394,6 +394,22 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { .port = 0x0D0C, .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, .dma_ch = 22, + }, { + .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */ + .addr = 0xffe60018, + .dcr = HPB_DMAE_DCR_SPDS_32BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_32BIT, + .port = 0x0000, + .dma_ch = 14, + }, { + .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */ + .addr = 0xffe6001c, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_32BIT | + HPB_DMAE_DCR_DPDS_32BIT, + .port = 0x0101, + .dma_ch = 15, }, HPBDMA_SSI(0), @@ -418,6 +434,8 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { }; static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */ + HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */ -- cgit v1.1 From 7e429989b68533ee3896c96264a1cce99b95d218 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 12 Dec 2013 18:14:21 +0000 Subject: ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code The PCI sub-system is not enabled by default on ARM and on certain Renesas devices the build does not select it. This means that there are configurations that do not allow the AHB-PCI bridge used for the USB sub-systems to be built. For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config where there may be many Reneasas devices selected. Reviewed-by: Ian Molton Signed-off-by: Ben Dooks Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index aa9017b..8a1364e 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI select HAVE_SMP select ARM_GIC select MIGHT_HAVE_CACHE_L2X0 + select MIGHT_HAVE_PCI select NO_IOPORT select PINCTRL select ARCH_REQUIRE_GPIOLIB @@ -96,6 +97,7 @@ config ARCH_R8A7790 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 + select MIGHT_HAVE_PCI select SH_CLK_CPG select RENESAS_IRQC @@ -104,6 +106,7 @@ config ARCH_R8A7791 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 + select MIGHT_HAVE_PCI select SH_CLK_CPG select RENESAS_IRQC @@ -112,6 +115,7 @@ config ARCH_EMEV2 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 + select MIGHT_HAVE_PCI select USE_OF select AUTO_ZRELADDR -- cgit v1.1 From ac991dce6498b5fc6396c7ac6f6a27b5585ef0f3 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:05:12 +0100 Subject: ARM: shmobile: r8a7790: Add clock index macros for DT sources Add macros usable by device tree sources to reference r8a7790 clocks by index. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/clock/r8a7790-clock.h | 100 ++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 include/dt-bindings/clock/r8a7790-clock.h diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h new file mode 100644 index 0000000..420f0b0 --- /dev/null +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -0,0 +1,100 @@ +/* + * Copyright 2013 Ideas On Board SPRL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__ +#define __DT_BINDINGS_CLOCK_R8A7790_H__ + +/* CPG */ +#define R8A7790_CLK_MAIN 0 +#define R8A7790_CLK_PLL0 1 +#define R8A7790_CLK_PLL1 2 +#define R8A7790_CLK_PLL3 3 +#define R8A7790_CLK_LB 4 +#define R8A7790_CLK_QSPI 5 +#define R8A7790_CLK_SDH 6 +#define R8A7790_CLK_SD0 7 +#define R8A7790_CLK_SD1 8 +#define R8A7790_CLK_Z 9 + +/* MSTP1 */ +#define R8A7790_CLK_TMU1 11 +#define R8A7790_CLK_TMU3 21 +#define R8A7790_CLK_TMU2 22 +#define R8A7790_CLK_CMT0 24 +#define R8A7790_CLK_TMU0 25 +#define R8A7790_CLK_VSP1_DU1 27 +#define R8A7790_CLK_VSP1_DU0 28 +#define R8A7790_CLK_VSP1_RT 30 +#define R8A7790_CLK_VSP1_SY 31 + +/* MSTP2 */ +#define R8A7790_CLK_SCIFA2 2 +#define R8A7790_CLK_SCIFA1 3 +#define R8A7790_CLK_SCIFA0 4 +#define R8A7790_CLK_SCIFB0 6 +#define R8A7790_CLK_SCIFB1 7 +#define R8A7790_CLK_SCIFB2 16 +#define R8A7790_CLK_SYS_DMAC0 18 +#define R8A7790_CLK_SYS_DMAC1 19 + +/* MSTP3 */ +#define R8A7790_CLK_TPU0 4 +#define R8A7790_CLK_MMCIF1 5 +#define R8A7790_CLK_SDHI3 11 +#define R8A7790_CLK_SDHI2 12 +#define R8A7790_CLK_SDHI1 13 +#define R8A7790_CLK_SDHI0 14 +#define R8A7790_CLK_MMCIF0 15 +#define R8A7790_CLK_SSUSB 28 +#define R8A7790_CLK_CMT1 29 +#define R8A7790_CLK_USBDMAC0 30 +#define R8A7790_CLK_USBDMAC1 31 + +/* MSTP5 */ +#define R8A7790_CLK_THERMAL 22 +#define R8A7790_CLK_PWM 23 + +/* MSTP7 */ +#define R8A7790_CLK_EHCI 3 +#define R8A7790_CLK_HSUSB 4 +#define R8A7790_CLK_HSCIF1 16 +#define R8A7790_CLK_HSCIF0 17 +#define R8A7790_CLK_SCIF1 20 +#define R8A7790_CLK_SCIF0 21 +#define R8A7790_CLK_DU2 22 +#define R8A7790_CLK_DU1 23 +#define R8A7790_CLK_DU0 24 +#define R8A7790_CLK_LVDS1 25 +#define R8A7790_CLK_LVDS0 26 + +/* MSTP8 */ +#define R8A7790_CLK_VIN3 8 +#define R8A7790_CLK_VIN2 9 +#define R8A7790_CLK_VIN1 10 +#define R8A7790_CLK_VIN0 11 +#define R8A7790_CLK_ETHER 13 +#define R8A7790_CLK_SATA1 14 +#define R8A7790_CLK_SATA0 15 + +/* MSTP9 */ +#define R8A7790_CLK_GPIO5 7 +#define R8A7790_CLK_GPIO4 8 +#define R8A7790_CLK_GPIO3 9 +#define R8A7790_CLK_GPIO2 10 +#define R8A7790_CLK_GPIO1 11 +#define R8A7790_CLK_GPIO0 12 +#define R8A7790_CLK_RCAN1 15 +#define R8A7790_CLK_RCAN0 16 +#define R8A7790_CLK_IICDVFS 26 +#define R8A7790_CLK_I2C3 28 +#define R8A7790_CLK_I2C2 29 +#define R8A7790_CLK_I2C1 30 +#define R8A7790_CLK_I2C0 31 + +#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */ -- cgit v1.1 From 4d8864c9e94ec727f1c675b9f6921525c360334b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:05:13 +0100 Subject: ARM: shmobile: r8a7791: Add clock index macros for DT sources Add macros usable by device tree sources to reference r8a7791 clocks by index. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 include/dt-bindings/clock/r8a7791-clock.h diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h new file mode 100644 index 0000000..df1715b --- /dev/null +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -0,0 +1,105 @@ +/* + * Copyright 2013 Ideas On Board SPRL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__ +#define __DT_BINDINGS_CLOCK_R8A7791_H__ + +/* CPG */ +#define R8A7791_CLK_MAIN 0 +#define R8A7791_CLK_PLL0 1 +#define R8A7791_CLK_PLL1 2 +#define R8A7791_CLK_PLL3 3 +#define R8A7791_CLK_LB 4 +#define R8A7791_CLK_QSPI 5 +#define R8A7791_CLK_SDH 6 +#define R8A7791_CLK_SD0 7 +#define R8A7791_CLK_Z 8 + +/* MSTP1 */ +#define R8A7791_CLK_TMU1 11 +#define R8A7791_CLK_TMU3 21 +#define R8A7791_CLK_TMU2 22 +#define R8A7791_CLK_CMT0 24 +#define R8A7791_CLK_TMU0 25 +#define R8A7791_CLK_VSP1_DU1 27 +#define R8A7791_CLK_VSP1_DU0 28 +#define R8A7791_CLK_VSP1_SY 31 + +/* MSTP2 */ +#define R8A7791_CLK_SCIFA2 2 +#define R8A7791_CLK_SCIFA1 3 +#define R8A7791_CLK_SCIFA0 4 +#define R8A7791_CLK_SCIFB0 6 +#define R8A7791_CLK_SCIFB1 7 +#define R8A7791_CLK_SCIFB2 16 +#define R8A7791_CLK_DMAC 18 + +/* MSTP3 */ +#define R8A7791_CLK_TPU0 4 +#define R8A7791_CLK_SDHI2 11 +#define R8A7791_CLK_SDHI1 12 +#define R8A7791_CLK_SDHI0 14 +#define R8A7791_CLK_MMCIF0 15 +#define R8A7791_CLK_SSUSB 28 +#define R8A7791_CLK_CMT1 29 +#define R8A7791_CLK_USBDMAC0 30 +#define R8A7791_CLK_USBDMAC1 31 + +/* MSTP5 */ +#define R8A7791_CLK_THERMAL 22 +#define R8A7791_CLK_PWM 23 + +/* MSTP7 */ +#define R8A7791_CLK_HSUSB 4 +#define R8A7791_CLK_HSCIF2 13 +#define R8A7791_CLK_SCIF5 14 +#define R8A7791_CLK_SCIF4 15 +#define R8A7791_CLK_HSCIF1 16 +#define R8A7791_CLK_HSCIF0 17 +#define R8A7791_CLK_SCIF3 18 +#define R8A7791_CLK_SCIF2 19 +#define R8A7791_CLK_SCIF1 20 +#define R8A7791_CLK_SCIF0 21 +#define R8A7791_CLK_DU1 23 +#define R8A7791_CLK_DU0 24 +#define R8A7791_CLK_LVDS0 26 + +/* MSTP8 */ +#define R8A7791_CLK_VIN2 9 +#define R8A7791_CLK_VIN1 10 +#define R8A7791_CLK_VIN0 11 +#define R8A7791_CLK_ETHER 13 +#define R8A7791_CLK_SATA1 14 +#define R8A7791_CLK_SATA0 15 + +/* MSTP9 */ +#define R8A7791_CLK_GPIO7 4 +#define R8A7791_CLK_GPIO6 5 +#define R8A7791_CLK_GPIO5 7 +#define R8A7791_CLK_GPIO4 8 +#define R8A7791_CLK_GPIO3 9 +#define R8A7791_CLK_GPIO2 10 +#define R8A7791_CLK_GPIO1 11 +#define R8A7791_CLK_GPIO0 12 +#define R8A7791_CLK_RCAN1 15 +#define R8A7791_CLK_RCAN0 16 +#define R8A7791_CLK_I2C5 25 +#define R8A7791_CLK_IICDVFS 26 +#define R8A7791_CLK_I2C4 27 +#define R8A7791_CLK_I2C3 28 +#define R8A7791_CLK_I2C2 29 +#define R8A7791_CLK_I2C1 30 +#define R8A7791_CLK_I2C0 31 + +/* MSTP11 */ +#define R8A7791_CLK_SCIFA3 6 +#define R8A7791_CLK_SCIFA4 7 +#define R8A7791_CLK_SCIFA5 8 + +#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */ -- cgit v1.1 From 4b5c211f9f93c3919f23c88d808a4eda104ec8b2 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:51 +0100 Subject: ARM: shmobile: rcar-gen2: Initialize CCF before clock sources When CONFIG_COMMON_CLOCK is enabled, call rcar_gen2_clocks_init() in the timer init function to initialize the common clock framework before initializing the clock sources. This will take care of clock initialization when the r8a779[01] boards will be switched to multiplatform kernels. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-rcar-gen2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index b6275ab..69ccc6c6 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -44,8 +45,10 @@ u32 __init rcar_gen2_read_mode_pins(void) void __init rcar_gen2_timer_init(void) { -#ifdef CONFIG_ARM_ARCH_TIMER +#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK) u32 mode = rcar_gen2_read_mode_pins(); +#endif +#ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; int extal_mhz = 0; u32 freq; @@ -98,5 +101,8 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ +#ifdef CONFIG_COMMON_CLK + rcar_gen2_clocks_init(mode); +#endif clocksource_of_init(); } -- cgit v1.1 From 8967136000668e10743758c84ddd39556b01cd57 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 12 Dec 2013 21:35:43 +0900 Subject: ARM: shmobile: koelsch: Conditionally select MICREL_PHY The koelsch board uses has an SH ethernet controller which uses a Micrel phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the Micrel-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8a1364e..8c88892 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -243,6 +243,7 @@ config MACH_KOELSCH bool "Koelsch board" depends on ARCH_R8A7791 select USE_OF + select MICREL_PHY if SH_ETH config MACH_KZM9G bool "KZM-A9-GT board" -- cgit v1.1 From 250d829f68ecb5e775a99deb03c56832acec28f4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 18 Dec 2013 22:48:37 +0100 Subject: arm: shmobile: clks: remove duplicated clock from r7s72100 Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r7s72100.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c index 1c9d261..4aba20c 100644 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -178,7 +178,6 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), - CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]), }; void __init r7s72100_clock_init(void) -- cgit v1.1 From 784c33a0c9b509f09cb69bc93f3863ed20338462 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 7 Dec 2013 02:17:44 +0100 Subject: ARM: shmobile: koelsch: Add DU device Only the LVDS output is currently supported. Signed-off-by: Laurent Pinchart Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 63 ++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 6e12914..5d84fb6 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -19,6 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -26,13 +27,66 @@ #include #include #include +#include #include #include +#include #include #include #include #include +/* DU */ +static struct rcar_du_encoder_data koelsch_du_encoders[] = { + { + .type = RCAR_DU_ENCODER_NONE, + .output = RCAR_DU_OUTPUT_LVDS0, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data koelsch_du_pdata __initconst = { + .encoders = koelsch_du_encoders, + .num_encoders = ARRAY_SIZE(koelsch_du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfeb00000, 0x40000), + DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), + DEFINE_RES_IRQ(gic_spi(256)), + DEFINE_RES_IRQ(gic_spi(268)), +}; + +static void __init koelsch_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7791", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &koelsch_du_pdata, + .size_data = sizeof(koelsch_du_pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led koelsch_leds[] = { { @@ -80,6 +134,13 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { }; static const struct pinctrl_map koelsch_pinctrl_map[] = { + /* DU */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_rgb666", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_sync", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_clk_out_0", "du"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", "scif0_data_d", "scif0"), @@ -101,6 +162,8 @@ static void __init koelsch_add_standard_devices(void) platform_device_register_data(&platform_bus, "gpio-keys", -1, &koelsch_keys_pdata, sizeof(koelsch_keys_pdata)); + + koelsch_add_du_device(); } static const char * const koelsch_boards_compat_dt[] __initconst = { -- cgit v1.1 From 974faba70550409049ee349939f4479ad98908ae Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 8 Dec 2013 23:52:44 +0300 Subject: ARM: shmobile: Koelsch: add Ether support Register Ether platform device and pin data on the Koelsch board. Register platform fixup for Micrel KSZ8041 PHY, just like on the Lager board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 56 +++++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 5d84fb6..de7cc64 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -25,10 +25,12 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include @@ -87,6 +89,19 @@ static void __init koelsch_add_du_device(void) platform_device_register_full(&info); } +/* Ether */ +static const struct sh_eth_plat_data ether_pdata __initconst = { + .phy = 0x1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_RMII, + .ether_link_active_low = 1, +}; + +static const struct resource ether_resources[] __initconst = { + DEFINE_RES_MEM(0xee700000, 0x400), + DEFINE_RES_IRQ(gic_spi(162)), +}; + /* LEDS */ static struct gpio_led koelsch_leds[] = { { @@ -141,6 +156,15 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = { "du_sync", "du"), PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", "du_clk_out_0", "du"), + /* Ether */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", + "eth_link", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", + "eth_mdio", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", + "eth_rmii", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", + "intc_irq0", "intc"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", "scif0_data_d", "scif0"), @@ -156,6 +180,10 @@ static void __init koelsch_add_standard_devices(void) ARRAY_SIZE(koelsch_pinctrl_map)); r8a7791_pinmux_init(); r8a7791_add_standard_devices(); + platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + ðer_pdata, sizeof(ether_pdata)); platform_device_register_data(&platform_bus, "leds-gpio", -1, &koelsch_leds_pdata, sizeof(koelsch_leds_pdata)); @@ -166,6 +194,32 @@ static void __init koelsch_add_standard_devices(void) koelsch_add_du_device(); } +/* + * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits + * 14-15. We have to set them back to 01 from the default 00 value each time + * the PHY is reset. It's also important because the PHY's LED0 signal is + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will + * bounce on and off after each packet, which we apparently want to avoid. + */ +static int koelsch_ksz8041_fixup(struct phy_device *phydev) +{ + u16 phyctrl1 = phy_read(phydev, 0x1e); + + phyctrl1 &= ~0xc000; + phyctrl1 |= 0x4000; + return phy_write(phydev, 0x1e, phyctrl1); +} + +static void __init koelsch_init(void) +{ + koelsch_add_standard_devices(); + + if (IS_ENABLED(CONFIG_PHYLIB)) + phy_register_fixup_for_id("r8a7791-ether-ff:01", + koelsch_ksz8041_fixup); +} + static const char * const koelsch_boards_compat_dt[] __initconst = { "renesas,koelsch", NULL, @@ -175,7 +229,7 @@ DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), .init_early = r8a7791_init_early, .init_time = rcar_gen2_timer_init, - .init_machine = koelsch_add_standard_devices, + .init_machine = koelsch_init, .init_late = shmobile_init_late, .dt_compat = koelsch_boards_compat_dt, MACHINE_END -- cgit v1.1 From 9a3beb04ec32cab91a8e562ae068433387b84547 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 03:48:16 +0100 Subject: ARM: shmobile: armadillo: Set backlight enable GPIO The Armadillo 800 EVA panel module has a backlight enable signal connected to GPIO 61. Instead of requesting the GPIO in board code and setting it to a high level unconditionally, pass the GPIO number to the PWM backlight driver as the backlight enable GPIO. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index d9e28c7a..2ea8935 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -423,7 +423,7 @@ static struct platform_pwm_backlight_data pwm_backlight_data = { .max_brightness = 255, .dft_brightness = 255, .pwm_period_ns = 33333, /* 30kHz */ - .enable_gpio = -1, + .enable_gpio = 61, }; static struct platform_device pwm_backlight_device = { @@ -1203,9 +1203,6 @@ static void __init eva_init(void) r8a7740_pinmux_init(); r8a7740_meram_workaround(); - /* LCDC0 */ - gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ -- cgit v1.1 From 0ef3cde4d906041a497bfc585568a45ae84b4a8f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:52 +0100 Subject: ARM: shmobile: lager-reference: Enable multiplaform kernel support Enable multiplaform ARM architecture support for the Lager reference board. Common clock framework initialization will be handled by the rcar_gen2_init_timer() call, we just need to remove the legacy clock code initialization. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/mach-shmobile/Kconfig | 8 ++++++++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/board-lager-reference.c | 2 ++ 4 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5ef42fc..9e22bd4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -235,6 +235,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai-reference.dtb \ + r8a7790-lager-reference.dtb \ r8a7791-koelsch-reference.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index cd89d63..e7033a8 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -28,6 +28,10 @@ config ARCH_EMEV2 config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select RENESAS_IRQC + config ARCH_R8A7791 bool "R-Car M2 (R8A77910)" select RENESAS_IRQC @@ -47,6 +51,10 @@ config MACH_KZM9D depends on ARCH_EMEV2 select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_LAGER + bool "Lager board" + depends on ARCH_R8A7790 + comment "Renesas ARM SoCs System Configuration" endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 1c13104..9daa9c1 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -59,6 +59,7 @@ ifdef CONFIG_ARCH_SHMOBILE_MULTI obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d-reference.o +obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o else obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 51a3bcc..fc43f7ce 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -27,7 +27,9 @@ static void __init lager_add_standard_devices(void) { +#ifndef CONFIG_COMMON_CLK r8a7790_clock_init(); +#endif r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- cgit v1.1 From e006502126a6a1f3afd879afa9101cc3df8b11f9 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:53 +0100 Subject: ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization The common clock framework is initialized in the rcar_gen2_init_timer() function, remove the of_clk_init() call. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch-reference.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index a804a17..4b48e2d 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -19,7 +19,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include #include #include #include @@ -29,9 +28,7 @@ static void __init koelsch_add_standard_devices(void) { -#ifdef CONFIG_COMMON_CLK - of_clk_init(NULL); -#else +#ifndef CONFIG_COMMON_CLK r8a7791_clock_init(); #endif r8a7791_add_dt_devices(); -- cgit v1.1 From 4a606af20d930dc1a8b62b0f753cdc018914e5de Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:54 +0100 Subject: ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT Now that the common clock framework is supported, the clock lookup entries in clock-r8a7790.c are not registered anymore. Devices must instead reference their clocks in the device tree. However, SCIF and CMT devices are still instantiated through platform code, and thus need a clock lookup entry. Retrieve the SCIF and CMT clock entries by name and register clkdevs for the corresponding devices. This will be removed when the SCIF and CMT devices will be instantiated from the device tree. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager-reference.c | 31 +++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index fc43f7ce..7e3fe37 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -18,6 +18,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include +#include #include #include #include @@ -27,9 +29,36 @@ static void __init lager_add_standard_devices(void) { -#ifndef CONFIG_COMMON_CLK +#ifdef CONFIG_COMMON_CLK + /* + * This is a really crude hack to provide clkdev support to the SCIF + * and CMT devices until they get moved to DT. + */ + static const char * const scif_names[] = { + "scifa0", "scifa1", "scifb0", "scifb1", + "scifb2", "scifa2", "scif0", "scif1", + "hscif0", "hscif1", + }; + struct clk *clk; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(scif_names); ++i) { + clk = clk_get(NULL, scif_names[i]); + if (clk) { + clk_register_clkdev(clk, NULL, "sh-sci.%u", i); + clk_put(clk); + } + } + + clk = clk_get(NULL, "cmt0"); + if (clk) { + clk_register_clkdev(clk, NULL, "sh_cmt.0"); + clk_put(clk); + } +#else r8a7790_clock_init(); #endif + r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- cgit v1.1 From f31239ef590186b6895a2f2cf7e0f2709a5c0da0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:55 +0100 Subject: ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT Now that the common clock framework is supported, the clock lookup entries in clock-r8a7791.c are not registered anymore. Devices must instead reference their clocks in the device tree. However, SCIF and CMT devices are still instantiated through platform code, and thus need a clock lookup entry. Retrieve the SCIF and CMT clock entries by name and register clkdevs for the corresponding devices. This will be removed when the SCIF and CMT devices will be instantiated from the device tree. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch-reference.c | 30 +++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index 4b48e2d..e1c787e 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -19,6 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include +#include #include #include #include @@ -28,7 +30,33 @@ static void __init koelsch_add_standard_devices(void) { -#ifndef CONFIG_COMMON_CLK +#ifdef CONFIG_COMMON_CLK + /* + * This is a really crude hack to provide clkdev support to the SCIF + * and CMT devices until they get moved to DT. + */ + static const char * const scif_names[] = { + "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2", + "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3", + "scifa4", "scifa5", + }; + struct clk *clk; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(scif_names); ++i) { + clk = clk_get(NULL, scif_names[i]); + if (clk) { + clk_register_clkdev(clk, NULL, "sh-sci.%u", i); + clk_put(clk); + } + } + + clk = clk_get(NULL, "cmt0"); + if (clk) { + clk_register_clkdev(clk, NULL, "sh_cmt.0"); + clk_put(clk); + } +#else r8a7791_clock_init(); #endif r8a7791_add_dt_devices(); -- cgit v1.1 From a8325d627fdd688de0b50e9edf4ed3787c6b5ee5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:56 +0100 Subject: ARM: shmobile: Remove non-multiplatform Lager reference support Now that r8a7790 has CCF support remove the legacy Lager reference Kconfig bits CONFIG_MACH_LAGER_REFERENCE for the non-multiplatform case. Starting from this commit Lager board support is always enabled via CONFIG_MACH_LAGER, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-lager.c and board-lager-reference.c The file board-lager-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 - arch/arm/mach-shmobile/Kconfig | 11 ----------- arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/Makefile.boot | 1 - 4 files changed, 14 deletions(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9e22bd4..37aefa2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -227,7 +227,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r8a7779-marzen-reference.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ - r8a7790-lager-reference.dtb \ sh73a0-kzm9g.dtb \ sh73a0-kzm9g-reference.dtb \ r8a73a4-ape6evm.dtb \ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index e7033a8..88bf980 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -262,17 +262,6 @@ config MACH_LAGER depends on ARCH_R8A7790 select USE_OF -config MACH_LAGER_REFERENCE - bool "Lager board - Reference Device Tree Implementation" - depends on ARCH_R8A7790 - select USE_OF - ---help--- - Use reference implementation of Lager board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_KOELSCH bool "Koelsch board" depends on ARCH_R8A7791 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 9daa9c1..fad94ee 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -71,7 +71,6 @@ obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o -obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 759e4f8f..f6d5119 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -13,7 +13,6 @@ loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 -loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000 -- cgit v1.1 From 469cd76b53b474e3fa235656eef4257a5134b0d8 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:57 +0100 Subject: ARM: shmobile: Remove non-multiplatform Koelsch reference support Now that r8a7791 has CCF support remove the legacy Koelsch reference Kconfig bits CONFIG_MACH_KOELSCH_REFERENCE for the non-multiplatform case. Starting from this commit Koelsch board support is always enabled via CONFIG_MACH_KOELSCH, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-koelsch.c and board-koelsch-reference.c The file board-koelsch-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Signed-off-by: Laurent Pinchart [horms+renesas@verge.net.au: Dropped arch/arm/boot/dts/Makefile portion] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 11 ----------- arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/Makefile.boot | 1 - 3 files changed, 13 deletions(-) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 88bf980..3386406 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -268,17 +268,6 @@ config MACH_KOELSCH select USE_OF select MICREL_PHY if SH_ETH -config MACH_KOELSCH_REFERENCE - bool "Koelsch board - Reference Device Tree Implementation" - depends on ARCH_R8A7791 - select USE_OF - ---help--- - Use reference implementation of Koelsch board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fad94ee..fe7d4ff 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -74,7 +74,6 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o -obj-$(CONFIG_MACH_KOELSCH_REFERENCE) += board-koelsch-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o endif diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index f6d5119..99455ec 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -9,7 +9,6 @@ loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000 loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 -loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 -- cgit v1.1 From 1fb68146d5fa7656f48bc5caaa74312b7fc7257e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:58 +0100 Subject: ARM: shmobile: Let Lager multiplatform boot with Lager DTB Let the multiplatform Lager support boot with the legacy DTS for Lager as well as the Lager reference DTS. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 2 +- arch/arm/mach-shmobile/board-lager-reference.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 37aefa2..f28b4ef 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -234,7 +234,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai-reference.dtb \ - r8a7790-lager-reference.dtb \ + r8a7790-lager.dtb \ r8a7791-koelsch-reference.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 7e3fe37..a6e271d 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -64,6 +64,7 @@ static void __init lager_add_standard_devices(void) } static const char *lager_boards_compat_dt[] __initdata = { + "renesas,lager", "renesas,lager-reference", NULL, }; -- cgit v1.1 From 1d2bdbc3a8f93b8c1dfc95b2df89c266dd6ce9d0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Dec 2013 15:13:59 +0100 Subject: ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB Let the multiplatform Koelsch support boot with the legacy DTS for Koelsch as well as the Koelsch reference DTS. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 4 ++-- arch/arm/mach-shmobile/board-koelsch-reference.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f28b4ef..ee0f2bd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -234,8 +234,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai-reference.dtb \ - r8a7790-lager.dtb \ - r8a7791-koelsch-reference.dtb + r8a7791-koelsch.dtb \ + r8a7790-lager.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index e1c787e..652b592 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -64,6 +64,7 @@ static void __init koelsch_add_standard_devices(void) } static const char * const koelsch_boards_compat_dt[] __initconst = { + "renesas,koelsch", "renesas,koelsch-reference", NULL, }; -- cgit v1.1 From b58c8e7b43ad804ad18b30f882b16da2e3d4ed9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 14 Dec 2013 15:45:01 +0100 Subject: ARM: shmobile: mackerel: Fix USBHS pinconf entry Fix a typo in the USBHS1 pinconf entry that prevented the pull-down from being enabled. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-mackerel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 207acf0..b3ee96e 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1406,7 +1406,7 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { /* USBHS1 */ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", "usb1_vbus", "usb1"), - PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.&", "pfc-sh7372", + PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", "usb1_vbus", pin_pulldown_conf), PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", "usb1_otg_id_0", "usb1"), -- cgit v1.1