From f74974c763c872d65da4062a14f4e73c77a0b577 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 17:27:51 +0200 Subject: drm/i915: disable temporal dithering on the internal panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i'm getting tempted to just disable temporal Approved. apparently it makes the screen look pulse-y which is worse than the disease. References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.html Tested-by: Олег Герман Reviewed-by: Adam Jackson Signed-off-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 981b1f1..b75bd93 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5671,7 +5671,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); -- cgit v1.1 From 80a2901d2a59946d098c4479d650d0c3c82c3d85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 10:59:05 +0200 Subject: drm/i915: only match on PCI_BASE_CLASS_DISPLAY ... not DISPLAY_VGA, because we ignore the VGA subclass with our class_mask. It confused me until Chris Wilson clued me up. Signed-off-by: Daniel Vetter Reviewed-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4c8d681..548e04b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -106,7 +106,7 @@ static struct drm_driver driver; extern int intel_agp_enabled; #define INTEL_VGA_DEVICE(id, info) { \ - .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class = PCI_BASE_CLASS_DISPLAY << 16, \ .class_mask = 0xff0000, \ .vendor = 0x8086, \ .device = id, \ -- cgit v1.1 From 828204903945002be837d938401e242978b7b505 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 10 Oct 2011 16:33:34 -0400 Subject: drm/i915: intel_choose_pipe_bpp_dither messages should be DRM_DEBUG_KMS Shouldn't hide these behind _DRIVER, they're all KMS-related. Signed-off-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b75bd93..9fa342e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4711,7 +4711,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4722,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4737,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,10 +4748,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } @@ -4789,8 +4789,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; -- cgit v1.1 From 3fca806cf343155d0bb0dfbdbc2e51ef47b65750 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8..3a8d448 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); -- cgit v1.1 From c5e62bdd73da80e1017058c923336a5a150af9f2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky --- drivers/char/agp/intel-gtt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d448..c92424c 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } -- cgit v1.1 From 627f7675f0f530ea555d76543dc4e469d70a1532 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 31 Oct 2011 11:30:10 -0700 Subject: drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work Use of the struct_mutex is not correct for locking in mode setting paths. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc1a0832..7259034 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -971,9 +971,9 @@ static void ironlake_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp->base.base.dev; - mutex_lock(&dev->struct_mutex); + mutex_lock(&dev->mode_config.mutex); ironlake_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); } static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) -- cgit v1.1 From ff56b0bc84c01fb2c5d2ec6438becfe0f5f2f78f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36..d18b07a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { -- cgit v1.1 From 616fdb5afb12b4d5bb9e36df40d039e86aaaefc2 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 5 Oct 2011 11:44:54 -0700 Subject: drm/i915: forcewake warning fixes in debugfs Some more unsafe debugfs access are fixed with this patch. I tested all reads, but didn't thoroughly test the writes. Cc: "Nicolas Kalkhof" Signed-off-by: Ben Widawsky Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 57 +++++++++++++++++++++++++++++++++---- 1 file changed, 51 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 8e95d66..f2e0207 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -635,11 +635,16 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; + int ret; ring = &dev_priv->ring[(uintptr_t)node->info_ent->data]; if (ring->size == 0) return 0; + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + seq_printf(m, "Ring %s:\n", ring->name); seq_printf(m, " Head : %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR); seq_printf(m, " Tail : %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR); @@ -653,6 +658,8 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Control : %08x\n", I915_READ_CTL(ring)); seq_printf(m, " Start : %08x\n", I915_READ_START(ring)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -841,7 +848,16 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u16 crstanddelay = I915_READ16(CRSTANDVID); + u16 crstanddelay; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + crstanddelay = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f)); @@ -939,7 +955,11 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 delayfreq; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 0; i < 16; i++) { delayfreq = I915_READ(PXVFREQ_BASE + i * 4); @@ -947,6 +967,8 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -961,13 +983,19 @@ static int i915_inttoext_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 inttoext; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 1; i <= 32; i++) { inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4); seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -976,9 +1004,19 @@ static int i915_drpc_info(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u32 rgvmodectl = I915_READ(MEMMODECTL); - u32 rstdbyctl = I915_READ(RSTDBYCTL); - u16 crstandvid = I915_READ16(CRSTANDVID); + u32 rgvmodectl, rstdbyctl; + u16 crstandvid; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + rgvmodectl = I915_READ(MEMMODECTL); + rstdbyctl = I915_READ(RSTDBYCTL); + crstandvid = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ? "yes" : "no"); @@ -1166,9 +1204,16 @@ static int i915_gfxec(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4)); + mutex_unlock(&dev->struct_mutex); + return 0; } -- cgit v1.1 From 775d17b6ca4357048f36c22151335addfe15db4b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:01 +0200 Subject: drm/i915: Ivybridge still has fences! So don't forget to restore them on resume and dump them into the error state. Cc: stable@kernel.org Signed-off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_irq.c | 1 + drivers/gpu/drm/i915/i915_suspend.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9ee2729..b40004b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -824,6 +824,7 @@ static void i915_gem_record_fences(struct drm_device *dev, /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index f8f602d..7886e4f 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -370,6 +370,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); @@ -404,6 +405,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]); -- cgit v1.1 From 4b9de737fad5bd8993e6070530802de22f32744d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:02 +0200 Subject: drm/i915: add constants to size fence arrays and fields In preparation of to support 32 fences on Ivybdrigde. Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.h | 15 ++++++++------- drivers/gpu/drm/i915/i915_gem.c | 4 ++-- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 06a37f4..d2da91f 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -126,6 +126,9 @@ struct drm_i915_master_private { struct _drm_i915_sarea *sarea_priv; }; #define I915_FENCE_REG_NONE -1 +#define I915_MAX_NUM_FENCES 16 +/* 16 fences + sign bit for FENCE_REG_NONE */ +#define I915_MAX_NUM_FENCE_BITS 5 struct drm_i915_fence_reg { struct list_head lru_list; @@ -168,7 +171,7 @@ struct drm_i915_error_state { u32 instdone1; u32 seqno; u64 bbaddr; - u64 fence[16]; + u64 fence[I915_MAX_NUM_FENCES]; struct timeval time; struct drm_i915_error_object { int page_count; @@ -182,7 +185,7 @@ struct drm_i915_error_state { u32 gtt_offset; u32 read_domains; u32 write_domain; - s32 fence_reg:5; + s32 fence_reg:I915_MAX_NUM_FENCE_BITS; s32 pinned:2; u32 tiling:2; u32 dirty:1; @@ -375,7 +378,7 @@ typedef struct drm_i915_private { struct notifier_block lid_notifier; int crt_ddc_pin; - struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ + struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ @@ -506,7 +509,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; - uint64_t saveFENCE[16]; + uint64_t saveFENCE[I915_MAX_NUM_FENCES]; u32 saveCURACNTR; u32 saveCURAPOS; u32 saveCURABASE; @@ -777,10 +780,8 @@ struct drm_i915_gem_object { * Fence register bits (if any) for this object. Will be set * as needed when mapped into the GTT. * Protected by dev->struct_mutex. - * - * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE) */ - signed int fence_reg:5; + signed int fence_reg:I915_MAX_NUM_FENCE_BITS; /** * Advice: are the backing pages purgeable? diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d18b07a..a838597 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1745,7 +1745,7 @@ static void i915_gem_reset_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - for (i = 0; i < 16; i++) { + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct drm_i915_gem_object *obj = reg->obj; @@ -3877,7 +3877,7 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.gtt_list); for (i = 0; i < I915_NUM_RINGS; i++) init_ring_lists(&dev_priv->ring[i]); - for (i = 0; i < 16; i++) + for (i = 0; i < I915_MAX_NUM_FENCES; i++) INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); -- cgit v1.1 From 680da876f44a644aee891e1d0df5a560cfa4720e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 3 Nov 2011 14:15:13 -0700 Subject: drm/i915: enable cacheable objects on Ivybridge IVB supports these bits as well. Signed-off-by: Jesse Barnes Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a838597..ed0b68f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3613,7 +3613,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, obj->base.write_domain = I915_GEM_DOMAIN_CPU; obj->base.read_domains = I915_GEM_DOMAIN_CPU; - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* On Gen6, we can have the GPU use the LLC (the CPU * cache) for about a 10% performance improvement * compared to uncached. Graphics requests other than -- cgit v1.1 From 406478dc911e16677fbd9c84d1d50cdffbc031ab Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:04 -0800 Subject: drm/i915: Turn on a required 3D clock gating bit on Sandybridge. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5a09416..b807275 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3444,6 +3444,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL2 0x9404 +# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) + #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9fa342e..2b2a764 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8148,6 +8148,15 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: -- cgit v1.1 From 9ca1d10d748e56964de95e3ed80211b192f56cf4 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:05 -0800 Subject: drm/i915: Turn on another required clock gating bit on gen6. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b807275..a34e866 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3446,6 +3446,7 @@ #define GEN6_UCGCTL2 0x9404 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) +# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2b2a764..591eb0ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8154,8 +8154,13 @@ static void gen6_init_clock_gating(struct drm_device *dev) * some amount of runtime in the Mesa "fire" demo, and Unigine * Sanctuary and Tropics, and apparently anything else with * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. */ - I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* * According to the spec the following bits should be -- cgit v1.1 From 4415e63b13c68c2f56d16d400a1ae345f68cf655 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 9 Nov 2011 09:57:50 -0800 Subject: drm/i915: Module parameters using '-1' as default must be signed type Testing i915_panel_use_ssc for the default value was broken, so the driver would never autodetect the correct value. Signed-off-by: Keith Packard Reviewed-by: Michel Alexandre Salim Tested-by: Michel Alexandre Salim Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 548e04b..13488be 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -67,7 +67,7 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, "Enable power-saving render C-state 6 (default: true)"); -unsigned int i915_enable_fbc __read_mostly = -1; +int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); MODULE_PARM_DESC(i915_enable_fbc, "Enable frame buffer compression for power savings " @@ -79,7 +79,7 @@ MODULE_PARM_DESC(lvds_downclock, "Use panel (LVDS/eDP) downclocking for power savings " "(default: false)"); -unsigned int i915_panel_use_ssc __read_mostly = -1; +int i915_panel_use_ssc __read_mostly = -1; module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); MODULE_PARM_DESC(lvds_use_ssc, "Use Spread Spectrum Clock with panels [LVDS/eDP] " diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d2da91f..4a9c1b9 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1000,10 +1000,10 @@ extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; -extern unsigned int i915_panel_use_ssc __read_mostly; +extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; extern unsigned int i915_enable_rc6 __read_mostly; -extern unsigned int i915_enable_fbc __read_mostly; +extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); -- cgit v1.1 From 832dd3c17f7829fe8e4c257531d6c5c9e19bd7ac Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:34:06 -0700 Subject: drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control Every usage of PCH_PP_CONTROL sets the PANEL_UNLOCK_REGS value to ensure that writes will be respected, move this to a common function to make the driver cleaner. No functional changes. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7259034..efe5f9e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -906,6 +906,19 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp) msleep(delay); } +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv) +{ + u32 control = I915_READ(PCH_PP_CONTROL); + + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; @@ -926,9 +939,7 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) } ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -951,9 +962,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1012,9 +1021,7 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) return; ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1049,9 +1056,7 @@ static void ironlake_edp_panel_off(struct drm_encoder *encoder) if (!is_edp(intel_dp)) return; - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1098,9 +1103,7 @@ static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) * allowing it to appear. */ msleep(intel_dp->backlight_on_delay); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1116,9 +1119,7 @@ static void ironlake_edp_backlight_off(struct intel_dp *intel_dp) return; DRM_DEBUG_KMS("\n"); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); -- cgit v1.1 From 93f62dad5ffe0962d83772fd16c0c1a9dd69767d Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:45:03 -0700 Subject: drm/i915: Remove link_status field from intel_dp structure No persistent data was ever stored here, so link_status is instead allocated on the stack as needed. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 65 +++++++++++++++++++++++------------------ 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index efe5f9e..2c0c482 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -58,7 +58,6 @@ struct intel_dp { struct i2c_algo_dp_aux_data algo; bool is_pch_edp; uint8_t train_set[4]; - uint8_t link_status[DP_LINK_STATUS_SIZE]; int panel_power_up_delay; int panel_power_down_delay; int panel_power_cycle_delay; @@ -1285,11 +1284,11 @@ intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, * link status information */ static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { return intel_dp_aux_native_read_retry(intel_dp, DP_LANE0_1_STATUS, - intel_dp->link_status, + link_status, DP_LINK_STATUS_SIZE); } @@ -1301,27 +1300,25 @@ intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], } static uint8_t -intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_voltage(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; } static uint8_t -intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; } @@ -1362,15 +1359,18 @@ intel_dp_pre_emphasis_max(uint8_t voltage_swing) } static void -intel_get_adjust_train(struct intel_dp *intel_dp) +intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { + struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; + uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); + int voltage_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { - uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane); - uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane); if (this_v > v) v = this_v; @@ -1389,7 +1389,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(uint8_t train_set, int lane_count) +intel_dp_signal_levels(uint8_t train_set) { uint32_t signal_levels = 0; @@ -1458,9 +1458,8 @@ static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) { - int i = DP_LANE0_1_STATUS + (lane >> 1); int s = (lane & 1) * 4; - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = link_status[lane>>1]; return (l >> s) & 0xf; } @@ -1485,18 +1484,18 @@ intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count DP_LANE_CHANNEL_EQ_DONE|\ DP_LANE_SYMBOL_LOCKED) static bool -intel_channel_eq_ok(struct intel_dp *intel_dp) +intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { uint8_t lane_align; uint8_t lane_status; int lane; - lane_align = intel_dp_link_status(intel_dp->link_status, + lane_align = intel_dp_link_status(link_status, DP_LANE_ALIGN_STATUS_UPDATED); if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) return false; for (lane = 0; lane < intel_dp->lane_count; lane++) { - lane_status = intel_get_lane_status(intel_dp->link_status, lane); + lane_status = intel_get_lane_status(link_status, lane); if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) return false; } @@ -1569,12 +1568,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; if (IS_GEN6(dev) && is_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1590,10 +1591,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Set training pattern 1 */ udelay(100); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; + } - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("clock recovery OK\n"); clock_recovery = true; break; } @@ -1615,7 +1619,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); } intel_dp->DP = DP; @@ -1638,6 +1642,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; if (cr_tries > 5) { DRM_ERROR("failed to train DP, aborting\n"); @@ -1649,7 +1654,8 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1665,17 +1671,17 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; udelay(400); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) break; /* Make sure clock is still ok */ - if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { intel_dp_start_link_train(intel_dp); cr_tries++; continue; } - if (intel_channel_eq_ok(intel_dp)) { + if (intel_channel_eq_ok(intel_dp, link_status)) { channel_eq = true; break; } @@ -1690,7 +1696,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) } /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); ++tries; } @@ -1822,6 +1828,7 @@ static void intel_dp_check_link_status(struct intel_dp *intel_dp) { u8 sink_irq_vector; + u8 link_status[DP_LINK_STATUS_SIZE]; if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1830,7 +1837,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp)) { + if (!intel_dp_get_link_status(intel_dp, link_status)) { intel_dp_link_down(intel_dp); return; } @@ -1855,7 +1862,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } - if (!intel_channel_eq_ok(intel_dp)) { + if (!intel_channel_eq_ok(intel_dp, link_status)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", drm_get_encoder_name(&intel_dp->base.base)); intel_dp_start_link_train(intel_dp); -- cgit v1.1 From 417e822deee1d2bcd8a8a60660c40a0903713f2b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:54:11 -0700 Subject: drm/i915: Treat PCH eDP like DP in most places PCH eDP has many of the same needs as regular PCH DP connections, including the DP_CTl bit settings, the TRANS_DP_CTL register. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_display.c | 3 +- drivers/gpu/drm/i915/intel_dp.c | 103 ++++++++++++++++++++++++----------- 2 files changed, 72 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 591eb0ed..e77a863 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c0c482..d1eabd4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { lane_count = intel_dp->lane_count; break; - } else if (is_edp(intel_dp)) { + } else if (is_cpu_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; break; } @@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, ironlake_edp_pll_off(encoder); } - intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - intel_dp->DP |= intel_dp->color_range; + /* + * There are three kinds of DP registers: + * + * IBX PCH + * CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; + /* Handle DP bits in common between all three register formats */ + + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; switch (intel_dp->lane_count) { case 1: @@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); intel_dp->link_configuration[0] = intel_dp->link_bw; intel_dp->link_configuration[1] = intel_dp->lane_count; intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; - /* * Check for DPCD version > 1.1 and enhanced framing support */ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; + if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } @@ -1341,6 +1368,7 @@ static char *link_train_names[] = { * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ #define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 +#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t intel_dp_pre_emphasis_max(uint8_t voltage_swing) @@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + voltage_max = I830_DP_VOLTAGE_MAX_CPT; + else + voltage_max = I830_DP_VOLTAGE_MAX; + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; if (p >= intel_dp_pre_emphasis_max(v)) p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; @@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { + + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_edp(intel_dp)) { + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + if (is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } if (!HAS_PCH_CPT(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; } -- cgit v1.1 From 99ea7127a30bda29354e1ed3a75d80d5f9cfc2a7 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:57:50 -0700 Subject: drm/i915: Let panel power sequencing hardware do its job The panel power sequencing hardware tracks the stages of panel power sequencing and signals when the panel is completely on or off. Instead of blindly assuming the panel timings will work, poll the panel power status register until it shows the correct values. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 17 +++-- drivers/gpu/drm/i915/intel_dp.c | 137 +++++++++++++++++++++------------------- 2 files changed, 85 insertions(+), 69 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index a34e866..b080cc8 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1553,12 +1553,21 @@ */ #define PP_READY (1 << 30) #define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 +#define PP_SEQUENCE_POWER_UP (1 << 28) +#define PP_SEQUENCE_POWER_DOWN (2 << 28) +#define PP_SEQUENCE_MASK (3 << 28) +#define PP_SEQUENCE_SHIFT 28 #define PP_CYCLE_DELAY_ACTIVE (1 << 27) -#define PP_SEQUENCE_STATE_ON_IDLE (1 << 3) #define PP_SEQUENCE_STATE_MASK 0x0000000f +#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) +#define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) +#define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) +#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) +#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) +#define PP_SEQUENCE_STATE_RESET (0xf << 0) #define PP_CONTROL 0x61204 #define POWER_TARGET_ON (1 << 0) #define PP_ON_DELAYS 0x61208 diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d1eabd4..5610610 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -66,7 +66,6 @@ struct intel_dp { struct drm_display_mode *panel_fixed_mode; /* for eDP */ struct delayed_work panel_vdd_work; bool want_panel_vdd; - unsigned long panel_off_jiffies; }; /** @@ -906,32 +905,53 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } -static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void ironlake_wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) { - unsigned long off_time; - unsigned long delay; + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; - DRM_DEBUG_KMS("Wait for panel power off time\n"); + DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", + mask, value, + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); - if (ironlake_edp_have_panel_power(intel_dp) || - ironlake_edp_have_panel_vdd(intel_dp)) - { - DRM_DEBUG_KMS("Panel still on, no delay needed\n"); - return; + if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) { + DRM_ERROR("Panel status timeout: status %08x control %08x\n", + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); } +} - off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay); - if (time_after(jiffies, off_time)) { - DRM_DEBUG_KMS("Time already passed"); - return; - } - delay = jiffies_to_msecs(off_time - jiffies); - if (delay > intel_dp->panel_power_down_delay) - delay = intel_dp->panel_power_down_delay; - DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay); - msleep(delay); +static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power on\n"); + ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); } +static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power off time\n"); + ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power cycle\n"); + ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + + /* Read the current pp_control value, unlocking the register if it * is locked */ @@ -959,12 +979,15 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) "eDP VDD already requested on\n"); intel_dp->want_panel_vdd = true; + if (ironlake_edp_have_panel_vdd(intel_dp)) { DRM_DEBUG_KMS("eDP VDD already on\n"); return; } - ironlake_wait_panel_off(intel_dp); + if (!ironlake_edp_have_panel_power(intel_dp)) + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); @@ -996,7 +1019,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) /* Make sure sequencer is idle before allowing subsequent activity */ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n", I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL)); - intel_dp->panel_off_jiffies = jiffies; + + msleep(intel_dp->panel_power_down_delay); } } @@ -1034,21 +1058,25 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) } } -/* Returns true if the panel was already on when called */ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; + u32 pp; if (!is_edp(intel_dp)) return; - if (ironlake_edp_have_panel_power(intel_dp)) + + DRM_DEBUG_KMS("Turn eDP power on\n"); + + if (ironlake_edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP power already on\n"); return; + } - ironlake_wait_panel_off(intel_dp); - pp = ironlake_get_pp_control(dev_priv); + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ pp &= ~PANEL_POWER_RESET; @@ -1057,13 +1085,13 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } pp |= POWER_TARGET_ON; + if (!IS_GEN5(dev)) + pp |= PANEL_POWER_RESET; + I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, - 5000)) - DRM_ERROR("panel on wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + ironlake_wait_panel_on(intel_dp); if (IS_GEN5(dev)) { pp |= PANEL_POWER_RESET; /* restore panel reset bit */ @@ -1072,44 +1100,25 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } } -static void ironlake_edp_panel_off(struct drm_encoder *encoder) +static void ironlake_edp_panel_off(struct intel_dp *intel_dp) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK | - PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK; + u32 pp; if (!is_edp(intel_dp)) return; - pp = ironlake_get_pp_control(dev_priv); - if (IS_GEN5(dev)) { - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } - - intel_dp->panel_off_jiffies = jiffies; + DRM_DEBUG_KMS("Turn eDP power off\n"); - if (IS_GEN5(dev)) { - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - msleep(intel_dp->panel_power_cycle_delay); + WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n"); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000)) - DRM_ERROR("panel off wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + pp = ironlake_get_pp_control(dev_priv); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); + I915_WRITE(PCH_PP_CONTROL, pp); + POSTING_READ(PCH_PP_CONTROL); - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } + ironlake_wait_panel_off(intel_dp); } static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) @@ -1223,7 +1232,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder) */ ironlake_edp_backlight_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1237,7 +1246,6 @@ static void intel_dp_commit(struct drm_encoder *encoder) intel_dp_start_link_train(intel_dp); ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); @@ -1261,7 +1269,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); @@ -2398,11 +2406,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay; - ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); + if (ret) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) dev_priv->no_aux_handshake = -- cgit v1.1 From 21264c638b4f9179655a39436d0340bd0d4ab1de Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:25:21 -0700 Subject: drm/i915: Make DP prepare/commit consistent with DP dpms Make sure the sequence of operations in all three functions makes sense: 1) The backlight must be off unless the screen is running 2) The link must be running to turn the eDP panel on/off 3) The CPU eDP PLL must be running until everything is off Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5610610..8e37fdd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1222,17 +1222,18 @@ static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + /* Wake up the sink first */ ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_link_down(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); /* Make sure the panel is off before trying to * change the mode */ - ironlake_edp_backlight_off(intel_dp); - intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1264,16 +1265,20 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) uint32_t dp_reg = I915_READ(intel_dp->output_reg); if (mode != DRM_MODE_DPMS_ON) { + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + ironlake_edp_panel_vdd_on(intel_dp); - if (is_edp(intel_dp)) - ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) - ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); + + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_off(encoder); } else { + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_on(encoder); + ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { @@ -1281,7 +1286,6 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); - ironlake_edp_backlight_on(intel_dp); } else ironlake_edp_panel_vdd_off(intel_dp, false); ironlake_edp_backlight_on(intel_dp); -- cgit v1.1 From cdb0e95bf571dccc1f75fef9bdad21b167ef0b37 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:00:06 -0700 Subject: drm/i915: Try harder during dp pattern 1 link training Instead of going through the sequence just once, run through the whole set up to 5 times to see if something can work. This isn't part of the DP spec, but the BIOS seems to do it, and given that link training failure is so bad, it seems reasonable to follow suit. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8e37fdd..7101b8b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1581,7 +1581,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int i; uint8_t voltage; bool clock_recovery = false; - int tries; + int voltage_tries, loop_tries; u32 reg; uint32_t DP = intel_dp->DP; @@ -1608,7 +1608,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP &= ~DP_LINK_TRAIN_MASK; memset(intel_dp->train_set, 0, 4); voltage = 0xff; - tries = 0; + voltage_tries = 0; + loop_tries = 0; clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ @@ -1651,16 +1652,26 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; - if (i == intel_dp->lane_count) - break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_DEBUG_KMS("too many full retries, give up\n"); + break; + } + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } /* Check to see if we've tried the same voltage 5 times */ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) + ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); break; + } } else - tries = 0; + voltage_tries = 0; voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ -- cgit v1.1 From f2e8b18af95358cf5407bf263cba04fc4c379123 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:01:35 -0700 Subject: drm/i915: Remove trailing white space Found a couple of bare tabs in intel_dp.c Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7101b8b..7bdf77e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1042,7 +1042,7 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd); WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); - + intel_dp->want_panel_vdd = false; if (sync) { @@ -2388,7 +2388,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> PANEL_LIGHT_ON_DELAY_SHIFT; - + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> PANEL_LIGHT_OFF_DELAY_SHIFT; -- cgit v1.1 From b34f1f0931575bf1e1483472a5202b8247fa9b10 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 10:17:59 -0700 Subject: drm/i915: Initiate DP link training only on the lanes we'll be using Limit the link training setting command to the lanes needed for the current mode. It seems vaguely possible that a monitor will try to train the other lanes and fail in some way, so this seems like the safer plan. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7bdf77e..8c3819b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1564,8 +1564,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count) return false; return true; -- cgit v1.1 From 9a10f401a401ca69c6537641c8fc0d6b57b5aee8 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 13:03:47 -0700 Subject: drm/i915: Use DPCD value for max DP lanes. The BIOS VBT value for an eDP panel has been shown to be incorrect on one machine, and we haven't found any machines where the DPCD value was wrong, so we'll use the DPCD value everywhere. Signed-off-by: Keith Packard Reviewed-by: Adam Jackson Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8c3819b..ec28aeb 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -154,16 +154,12 @@ intel_edp_link_config(struct intel_encoder *intel_encoder, static int intel_dp_max_lane_count(struct intel_dp *intel_dp) { - int max_lane_count = 4; - - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { - max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; - switch (max_lane_count) { - case 1: case 2: case 4: - break; - default: - max_lane_count = 4; - } + int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; } return max_lane_count; } @@ -765,12 +761,11 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) + { lane_count = intel_dp->lane_count; break; - } else if (is_cpu_edp(intel_dp)) { - lane_count = dev_priv->edp.lanes; - break; } } -- cgit v1.1 From 457eafce618cf89125da9d79751d81241bd3fa34 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 16 Nov 2011 00:49:28 +0600 Subject: drm, i915: Fix memory leak in i915_gem_busy_ioctl(). A call to i915_add_request() has been made in function i915_gem_busy_ioctl(). i915_add_request can fail, so in it's exit path previously allocated memory needs to be freed. Signed-off-by: Rakib Mullick Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ed0b68f..8359dc7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3512,9 +3512,11 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * so emit a request to do so. */ request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request) + if (request) { ret = i915_add_request(obj->ring, NULL, request); - else + if (ret) + kfree(request); + } else ret = -ENOMEM; } -- cgit v1.1 From 04b38670cf46c096705f24e92a8747d1ab89e53c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:58:03 +0100 Subject: drm/i915: Fix inconsistent backlight level during disabled When the brightness property is inquired while the backlight is disabled, the driver returns a wrong value (zero) because it probes the value after the backlight was turned off. This caused a black screen even after the backlight is enabled again. It should return the internal backlight_level instead, so that it won't be influenced by the backlight-enable state. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=41926 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/872652 Tested-by: Kamal Mostafa Cc: Alex Davis Cc: Signed-off-by: Takashi Iwai Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_panel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 499d4c0..21f60b7 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -326,7 +326,8 @@ static int intel_panel_update_status(struct backlight_device *bd) static int intel_panel_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); - return intel_panel_get_backlight(dev); + struct drm_i915_private *dev_priv = dev->dev_private; + return dev_priv->backlight_level; } static const struct backlight_ops intel_panel_bl_ops = { -- cgit v1.1