From 79cd76022044f8177bb00e3fd590ec8d6b5f8c35 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 9 Apr 2012 09:22:28 -0500 Subject: Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0 T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e042 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DCA61B5 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by: Dennis Chua Signed-off-by: Manoj Iyer Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3311b81..9af450a 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -101,6 +101,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, -- cgit v1.1 From 87522a433ba6886b5ccbb497e0a7cb8097def64e Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Fri, 13 Apr 2012 17:39:57 +0800 Subject: Bluetooth: Add support for Atheros [13d3:3362] Add another vendor specific ID for Atheros AR3012 device. This chip is wrapped by IMC Networks. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Johan Hedberg --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ae9edca..639a161 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x13d3, 0x3362) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -94,6 +95,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9af450a..a497544 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.1 From 745c0ce35f904aeff8e1ea325c259a14a00ff1b7 Mon Sep 17 00:00:00 2001 From: Vishal Agarwal Date: Fri, 13 Apr 2012 17:43:22 +0530 Subject: Bluetooth: hci_persistent_key should return bool This patch changes the return type of function hci_persistent_key from int to bool because it makes more sense to return information whether a key is persistent or not as a bool. Signed-off-by: Vishal Agarwal Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 2 +- net/bluetooth/hci_core.c | 21 +++++++++++---------- net/bluetooth/mgmt.c | 2 +- 3 files changed, 13 insertions(+), 12 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 6822d25..f8577c1 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -980,7 +980,7 @@ int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status); int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, - u8 persistent); + bool persistent); int mgmt_device_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, u32 flags, u8 *name, u8 name_len, u8 *dev_class); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 2054c13..c2251e4 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1216,40 +1216,40 @@ struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) return NULL; } -static int hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, +static bool hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, u8 key_type, u8 old_key_type) { /* Legacy key */ if (key_type < 0x03) - return 1; + return true; /* Debug keys are insecure so don't store them persistently */ if (key_type == HCI_LK_DEBUG_COMBINATION) - return 0; + return false; /* Changed combination key and there's no previous one */ if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff) - return 0; + return false; /* Security mode 3 case */ if (!conn) - return 1; + return true; /* Neither local nor remote side had no-bonding as requirement */ if (conn->auth_type > 0x01 && conn->remote_auth > 0x01) - return 1; + return true; /* Local side had dedicated bonding as requirement */ if (conn->auth_type == 0x02 || conn->auth_type == 0x03) - return 1; + return true; /* Remote side had dedicated bonding as requirement */ if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) - return 1; + return true; /* If none of the above criteria match, then don't store the key * persistently */ - return 0; + return false; } struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]) @@ -1286,7 +1286,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len) { struct link_key *key, *old_key; - u8 old_key_type, persistent; + u8 old_key_type; + bool persistent; old_key = hci_find_link_key(hdev, bdaddr); if (old_key) { diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4ef275c..4bb03b1 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2884,7 +2884,7 @@ int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status) return 0; } -int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, u8 persistent) +int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, bool persistent) { struct mgmt_ev_new_link_key ev; -- cgit v1.1 From 6ec5bcadc21e13ceba8c144e4731eccac01d04f7 Mon Sep 17 00:00:00 2001 From: Vishal Agarwal Date: Mon, 16 Apr 2012 14:44:44 +0530 Subject: Bluetooth: Temporary keys should be retained during connection If a key is non persistent then it should not be used in future connections but it should be kept for current connection. And it should be removed when connecion is removed. Signed-off-by: Vishal Agarwal Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_core.c | 6 ++---- net/bluetooth/hci_event.c | 2 ++ 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f8577c1..db1c5df 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -314,6 +314,7 @@ struct hci_conn { __u8 remote_cap; __u8 remote_auth; + bool flush_key; unsigned int sent; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index c2251e4..a7607e4 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1330,10 +1330,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, mgmt_new_link_key(hdev, key, persistent); - if (!persistent) { - list_del(&key->list); - kfree(key); - } + if (conn) + conn->flush_key = !persistent; return 0; } diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index badb785..6a72eae 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1902,6 +1902,8 @@ static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff } if (ev->status == 0) { + if (conn->type == ACL_LINK && conn->flush_key) + hci_remove_link_key(hdev, &conn->dst); hci_proto_disconn_cfm(conn, ev->reason); hci_conn_del(conn); } -- cgit v1.1 From ac71311e65e2c4c2dbac76db698fecbee755b016 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 19 Apr 2012 14:53:45 +0800 Subject: Bluetooth: Add support for AR3012 [0cf3:e004] Add another vendor specific ID for Atheros AR3012 output of usb-devices: T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e004 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/922715 Signed-off-by: AceLan Kao Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 639a161..57fd867 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -76,6 +76,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, + { USB_DEVICE(0x0CF3, 0xE004) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -96,6 +97,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a497544..93cc828 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.1 From 64ea57d0c77bd85003b63c6090ddfae114ef6508 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:05 +0200 Subject: ath9k: add an extra boolean parameter to ath9k_hw_apply_txpower In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 9 +++++---- drivers/net/wireless/ath/ath9k/hw.h | 3 ++- 5 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d7d8e91..aba0880 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -869,7 +869,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, ar5008_hw_set_channel_regs(ah, chan); ar5008_hw_init_chain_masks(ah); ath9k_olc_init(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); /* Write analog registers */ if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 59647a3..3d400e8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw *ah, bool val) if (val) { ah->paprd_table_write_done = true; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); } REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index bc992b2..deb6cfb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -694,7 +694,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, ar9003_hw_override_ini(ah); ar9003_hw_set_channel_regs(ah, chan); ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); if (AR_SREV_9462(ah)) { if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6c69e4e..fa84e37 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1454,7 +1454,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, return false; } ath9k_hw_set_clockrate(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); ath9k_hw_rfbus_done(ah); if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) @@ -2652,7 +2652,8 @@ static int get_antenna_gain(struct ath_hw *ah, struct ath9k_channel *chan) return ah->eep_ops->get_eeprom(ah, gain_param); } -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test) { struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; @@ -2673,7 +2674,7 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) ah->eep_ops->set_txpower(ah, chan, ath9k_regd_get_ctl(reg, chan), - ant_reduction, new_pwr, false); + ant_reduction, new_pwr, test); } void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) @@ -2686,7 +2687,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) if (test) channel->max_power = MAX_RATE_POWER / 2; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, test); if (test) channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index aa1680a..e88f182 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -985,7 +985,8 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len); /* PHY */ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, u32 *coef_mantissa, u32 *coef_exponent); -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test); /* * Code Specific to AR5008, AR9001 or AR9002, -- cgit v1.1 From 83722bd4aede80714f75bedc3cce9b6ea9baea7b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:06 +0200 Subject: ath9k: fix tx power settings for AR9287 The 'ath9k_hw_update_regulatory_maxpower' helper function has been introduced by commit a55f858852e4345d0a31af593c46738ca8614bff (ath9k_hw: Cleanup TX power calculation for AR9287). Updating of the max_power_level value has been moved into the helper function in that change, however the removed code from 'ath9k_hw_ar9287_set_txpower' has not been replaced with a call of the new helper function. Due to that missing call, retrieving tx power for 2x2 and 3x3 chainmask is not handled properly. During the calculation of the tx power for 2x2 and 3x3 chainmasks the values are reduced. Those reductions must be compensated during retrieving. Fix this by adding the missing call of the helper function. Signed-off-by: Gabor Juhos Acked-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index f272236..b34e8b2 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -824,6 +824,8 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah, regulatory->max_power_level = ratesArray[i]; } + ath9k_hw_update_regulatory_maxpower(ah); + if (test) return; -- cgit v1.1 From 8db4c7e25d153fb049e81715d72fa3be3a0c3b69 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 18 Apr 2012 08:01:15 -0700 Subject: iwlwifi: do not nulify ctx->vif on reset ctx->vif is dereferenced in different part of iwlwifi code, so do not nullify it. This should address at least one of the possible reasons of WARNING at iwlagn_mac_remove_interface, and perhaps some random crashes when firmware reset is performed. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 3 --- drivers/net/wireless/iwlwifi/iwl-mac80211.c | 10 +++++++++- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f1226dbf..2a9a16f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -863,7 +863,6 @@ static void iwl_bg_run_time_calib_work(struct work_struct *work) void iwlagn_prepare_restart(struct iwl_priv *priv) { - struct iwl_rxon_context *ctx; bool bt_full_concurrent; u8 bt_ci_compliance; u8 bt_load; @@ -872,8 +871,6 @@ void iwlagn_prepare_restart(struct iwl_priv *priv) lockdep_assert_held(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; priv->is_open = 0; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index b6805f8..c24a713 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -1244,6 +1244,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, struct iwl_rxon_context *tmp, *ctx = NULL; int err; enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); + bool reset = false; IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", viftype, vif->addr); @@ -1265,6 +1266,13 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, tmp->interface_modes | tmp->exclusive_interface_modes; if (tmp->vif) { + /* On reset we need to add the same interface again */ + if (tmp->vif == vif) { + reset = true; + ctx = tmp; + break; + } + /* check if this busy context is exclusive */ if (tmp->exclusive_interface_modes & BIT(tmp->vif->type)) { @@ -1291,7 +1299,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, ctx->vif = vif; err = iwl_setup_interface(priv, ctx); - if (!err) + if (!err || reset) goto out; ctx->vif = NULL; -- cgit v1.1 From dd447319895d0c0af423e483d9b63f84f3f8869a Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Thu, 19 Apr 2012 15:55:09 -0400 Subject: ipw2200: Fix race condition in the command completion acknowledge Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log: Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command. After that you need to reload the driver to get it working again. This bug occurs during roaming (reported by Sam Varshavchik) https://bugzilla.redhat.com/show_bug.cgi?id=738508 and machine booting (reported by Tom Gundersen and Mads Kiilerich) https://bugs.archlinux.org/task/28097 https://bugzilla.redhat.com/show_bug.cgi?id=802106 This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot. Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2200.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 2b02257..1779db3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -2191,6 +2191,7 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) { int rc = 0; unsigned long flags; + unsigned long now, end; spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { @@ -2232,10 +2233,20 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) } spin_unlock_irqrestore(&priv->lock, flags); + now = jiffies; + end = now + HOST_COMPLETE_TIMEOUT; +again: rc = wait_event_interruptible_timeout(priv->wait_command_queue, !(priv-> status & STATUS_HCMD_ACTIVE), - HOST_COMPLETE_TIMEOUT); + end - now); + if (rc < 0) { + now = jiffies; + if (time_before(now, end)) + goto again; + rc = 0; + } + if (rc == 0) { spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { -- cgit v1.1 From 44eb65cfd8da4b9c231238998729e858e963a980 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 Apr 2012 21:39:06 -0500 Subject: rtlwifi: Fix oops on unload Under some circumstances, a PCI-based driver reports the following OOPs: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP: 0010:[] [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid: 19627, threadinfo ffff880050262000, task ffff8801156d5cc0) Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000002 ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000282 0000000180150014 ffff880050263fd8 ffff8801176c2810 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] ffff880050263bc8 ffffffff810550e2 00000000000002c0 ffff8801176c0d40 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] [] _rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48 83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1 e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RSP Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0 Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace 8636c766dcfbe0e6 ]--- This oops is due to interrupts not being disabled in this particular path. Reported-by: Dave Airlie Tested-by: Dave Airlie Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 288b035..cc15fdb 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1941,6 +1941,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) rtl_deinit_deferred_work(hw); rtlpriv->intf_ops->adapter_stop(hw); } + rtlpriv->cfg->ops->disable_interrupt(hw); /*deinit rfkill */ rtl_deinit_rfkill(hw); -- cgit v1.1 From 6ead629b27269c553c9092c47cd8f5ab0309ee3b Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 22 Apr 2012 00:48:04 +0200 Subject: brcmsmac: "INTERMEDIATE but not AMPDU" only when tracing I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack Acked-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7083db7..b4d9279 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -847,8 +847,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) */ if (!(txs->status & TX_STATUS_AMPDU) && (txs->status & TX_STATUS_INTERMEDIATE)) { - wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n", - __func__); + BCMMSG(wlc->wiphy, "INTERMEDIATE but not AMPDU\n"); return false; } -- cgit v1.1 From a881e963c7fe1f226e991ee9bbe8907acda93294 Mon Sep 17 00:00:00 2001 From: "Peter Huang (Peng)" Date: Thu, 19 Apr 2012 20:12:51 +0000 Subject: set fake_rtable's dst to NULL to avoid kernel Oops bridge: set fake_rtable's dst to NULL to avoid kernel Oops when bridge is deleted before tap/vif device's delete, kernel may encounter an oops because of NULL reference to fake_rtable's dst. Set fake_rtable's dst to NULL before sending packets out can solve this problem. v4 reformat, change br_drop_fake_rtable(skb) to {} v3 enrich commit header v2 introducing new flag DST_FAKE_RTABLE to dst_entry struct. [ Use "do { } while (0)" for nop br_drop_fake_rtable() implementation -DaveM ] Acked-by: Eric Dumazet Signed-off-by: Peter Huang Signed-off-by: David S. Miller --- include/linux/netfilter_bridge.h | 9 +++++++++ include/net/dst.h | 1 + net/bridge/br_forward.c | 1 + net/bridge/br_netfilter.c | 8 ++------ 4 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 0ddd161..31d2844 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -104,9 +104,18 @@ struct bridge_skb_cb { } daddr; }; +static inline void br_drop_fake_rtable(struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + + if (dst && (dst->flags & DST_FAKE_RTABLE)) + skb_dst_drop(skb); +} + #else #define nf_bridge_maybe_copy_header(skb) (0) #define nf_bridge_pad(skb) (0) +#define br_drop_fake_rtable(skb) do { } while (0) #endif /* CONFIG_BRIDGE_NETFILTER */ #endif /* __KERNEL__ */ diff --git a/include/net/dst.h b/include/net/dst.h index ff4da42..bed833d 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -59,6 +59,7 @@ struct dst_entry { #define DST_NOCACHE 0x0010 #define DST_NOCOUNT 0x0020 #define DST_NOPEER 0x0040 +#define DST_FAKE_RTABLE 0x0080 short error; short obsolete; diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 61f6534..a2098e3 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -47,6 +47,7 @@ int br_dev_queue_push_xmit(struct sk_buff *skb) kfree_skb(skb); } else { skb_push(skb, ETH_HLEN); + br_drop_fake_rtable(skb); dev_queue_xmit(skb); } diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index dec4f38..d7f49b6 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -156,7 +156,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) rt->dst.dev = br->dev; rt->dst.path = &rt->dst; dst_init_metrics(&rt->dst, br_dst_default_metrics, true); - rt->dst.flags = DST_NOXFRM | DST_NOPEER; + rt->dst.flags = DST_NOXFRM | DST_NOPEER | DST_FAKE_RTABLE; rt->dst.ops = &fake_dst_ops; } @@ -694,11 +694,7 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb, const struct net_device *out, int (*okfn)(struct sk_buff *)) { - struct rtable *rt = skb_rtable(skb); - - if (rt && rt == bridge_parent_rtable(in)) - skb_dst_drop(skb); - + br_drop_fake_rtable(skb); return NF_ACCEPT; } -- cgit v1.1 From 9bbf56609d304e8aae2076610d938206453035de Mon Sep 17 00:00:00 2001 From: Stephane Fillod Date: Fri, 20 Apr 2012 09:39:23 +0000 Subject: net: usb: smsc95xx: fix mtu Make smsc95xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1488 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Beagle. Signed-off-by: Stephane Fillod Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 5f19f84..53a1ba5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1017,6 +1017,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } -- cgit v1.1 From 7e665afbb561544d6fcc3334285db5809a38d2c8 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Sun, 22 Apr 2012 21:21:41 +0000 Subject: qeth: allow change of blkt default values There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by: Ursula Braun Reported-by: Horst Hartmann Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 120955c..d78d0ce 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4540,7 +4540,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) goto out_offline; } qeth_configure_unitaddr(card, prcd); - qeth_configure_blkt_default(card, prcd); + if (ddev_offline) + qeth_configure_blkt_default(card, prcd); kfree(prcd); rc = qdio_get_ssqd_desc(ddev, &card->ssqd); -- cgit v1.1 From e6e056baa24b48642b86129e8a3fdaa98f2fe947 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Sun, 22 Apr 2012 21:21:42 +0000 Subject: qeth: Use blkt defaults for OSA Express 4 The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by: Stefan Raspl Reviewed-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d78d0ce..8334dad 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1672,7 +1672,8 @@ static void qeth_configure_blkt_default(struct qeth_card *card, char *prcd) { QETH_DBF_TEXT(SETUP, 2, "cfgblkt"); - if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && prcd[76] == 0xF5) { + if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && + (prcd[76] == 0xF5 || prcd[76] == 0xF6)) { card->info.blkt.time_total = 250; card->info.blkt.inter_packet = 5; card->info.blkt.inter_packet_jumbo = 15; -- cgit v1.1 From c2f1244b86492b6cc89202f3f9ed43c88fb3e79d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 23 Apr 2012 03:46:29 +0000 Subject: ehea: only register irq after setting up ports If we receive an interrupt too early before we set up ports in the probe function, there won't be any port ready to handle it. Only registering the irq after the ports are setup fixes the problem, and works fine without losing any interrupts. This causes crashes in some situations: [c000000f7ff7fd60] d000000008e223f0 .ehea_neq_tasklet+0x78/0x148 [ehea] [c000000f7ff7fe00] c0000000000b6cac .tasklet_hi_action+0xdc/0x210 [c000000f7ff7fea0] c0000000000b7cc8 .__do_softirq+0x178/0x300 [c000000f7ff7ff90] c000000000022694 .call_do_softirq+0x14/0x24 [c000000f68ee7900] c000000000010e04 .do_softirq+0xec/0x110 [c000000f68ee79a0] c0000000000b789c .irq_exit+0xac/0xe0 [c000000f68ee7a20] c0000000000110bc .do_IRQ+0x114/0x2a8 [c000000f68ee7ae0] c00000000000553c hardware_interrupt_entry+0x18/0x1c Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 3516e17..acf34b6 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -3261,6 +3261,7 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, struct ehea_adapter *adapter; const u64 *adapter_handle; int ret; + int i; if (!dev || !dev->dev.of_node) { pr_err("Invalid ibmebus device probed\n"); @@ -3314,17 +3315,9 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, tasklet_init(&adapter->neq_tasklet, ehea_neq_tasklet, (unsigned long)adapter); - ret = ibmebus_request_irq(adapter->neq->attr.ist1, - ehea_interrupt_neq, IRQF_DISABLED, - "ehea_neq", adapter); - if (ret) { - dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); - goto out_kill_eq; - } - ret = ehea_create_device_sysfs(dev); if (ret) - goto out_free_irq; + goto out_kill_eq; ret = ehea_setup_ports(adapter); if (ret) { @@ -3332,15 +3325,28 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, goto out_rem_dev_sysfs; } + ret = ibmebus_request_irq(adapter->neq->attr.ist1, + ehea_interrupt_neq, IRQF_DISABLED, + "ehea_neq", adapter); + if (ret) { + dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); + goto out_shutdown_ports; + } + + ret = 0; goto out; +out_shutdown_ports: + for (i = 0; i < EHEA_MAX_PORTS; i++) + if (adapter->port[i]) { + ehea_shutdown_single_port(adapter->port[i]); + adapter->port[i] = NULL; + } + out_rem_dev_sysfs: ehea_remove_device_sysfs(dev); -out_free_irq: - ibmebus_free_irq(adapter->neq->attr.ist1, adapter); - out_kill_eq: ehea_destroy_eq(adapter->neq); -- cgit v1.1 From 1ab8be4a14409c55050db69271631afebac29b5a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 23 Apr 2012 12:06:43 +0000 Subject: net/davinci_emac: fix failing PHY connect attempts PHY connect attempts fail if no PHY id is specified in the emac platform data and another mdio bus has been registered before 'davinci_mdio' bus. In this case when configuring the interface, there will be an attempt to connect to already attached PHY on the previously registered mdio bus: net eth1: PHY already attached net eth1: could not connect to phy smsc911x-0:01 IP-Config: Failed to open eth1 IP-Config: Device `eth1' not found Fix this by modifying match_first_device() to match first PHY device on 'davinci_mdio' bus. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 174a334..08aff1a 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1511,7 +1511,7 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) static int match_first_device(struct device *dev, void *data) { - return 1; + return !strncmp(dev_name(dev), "davinci_mdio", 12); } /** -- cgit v1.1 From 2a5809499e35b53a6044fd34e72b242688b7a862 Mon Sep 17 00:00:00 2001 From: Ingo van Lil Date: Mon, 23 Apr 2012 22:05:38 +0000 Subject: asix: Fix tx transfer padding for full-speed USB The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by: Ingo van Lil Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 5ee032c..42b5151 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -355,7 +355,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, u32 packet_len; u32 padbytes = 0xffff0000; - padlen = ((skb->len + 4) % 512) ? 0 : 4; + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { @@ -377,7 +377,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, cpu_to_le32s(&packet_len); skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - if ((skb->len % 512) == 0) { + if (padlen) { cpu_to_le32s(&padbytes); memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); skb_put(skb, sizeof(padbytes)); -- cgit v1.1 From 16cde9931bcd8d8ca968ef1cded02684ea040374 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Fri, 13 Apr 2012 12:32:42 +0200 Subject: Bluetooth: Fix missing break in hci_cmd_complete_evt Command complete event for HCI_OP_USER_PASSKEY_NEG_REPLY would result in calling handler function also for HCI_OP_LE_SET_SCAN_PARAM. This could result in undefined behaviour. Signed-off-by: Szymon Janc Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 6a72eae..7f87a70 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2314,6 +2314,7 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk case HCI_OP_USER_PASSKEY_NEG_REPLY: hci_cc_user_passkey_neg_reply(hdev, skb); + break; case HCI_OP_LE_SET_SCAN_PARAM: hci_cc_le_set_scan_param(hdev, skb); -- cgit v1.1 From 985140369be1e886754d8ac0375dd64e4f727311 Mon Sep 17 00:00:00 2001 From: Steven Harms Date: Fri, 13 Apr 2012 14:45:55 -0400 Subject: Add Foxconn / Hon Hai IDs for btusb module This change adds 0x0489:0xe033 to the btusb module. This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e033 Rev= 2.29 S: Manufacturer=Broadcom Corp S: Product=Acer Module S: SerialNumber=60D819F74101 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Steven Harms Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 93cc828..9217121 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -108,6 +108,9 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Foxconn - Hon Hai */ + { USB_DEVICE(0x0489, 0xe033) }, + { } /* Terminating entry */ }; -- cgit v1.1 From 5ef4acd58ab2abd0dd0c8e3cacd61a0dc5d73646 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Apr 2012 14:17:50 -0700 Subject: iwlwifi: fix hardware queue programming Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-fh.h | 24 +++++++++++++++++++----- drivers/net/wireless/iwlwifi/iwl-prph.h | 27 ++++++++++++++++++++++++--- 2 files changed, 43 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 9020809..74bce97 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -104,15 +104,29 @@ * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) + +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) +{ + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} /** diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 75dc20b..3b106929 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -223,12 +223,33 @@ #define SCD_AIT (SCD_BASE + 0x0c) #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4) -#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4) + +static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x18 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x284 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x68 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x2B4 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x10c + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x384 + (chnl - 20) * 4; +} /*********************** END TX SCHEDULER *************************************/ -- cgit v1.1 From 78cbcf2b9dbe0565820dc7721316f9c401000a68 Mon Sep 17 00:00:00 2001 From: Meenakshi Venkataraman Date: Sun, 22 Apr 2012 07:55:27 -0700 Subject: iwlwifi: use correct released ucode version Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-2000.c | 16 ++++++++-------- drivers/net/wireless/iwlwifi/iwl-5000.c | 11 +++++++++-- drivers/net/wireless/iwlwifi/iwl-6000.c | 10 ++++++---- 4 files changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 5b0d888..8d80e23 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -46,8 +46,8 @@ #include "iwl-prph.h" /* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 6 -#define IWL100_UCODE_API_MAX 6 +#define IWL1000_UCODE_API_MAX 5 +#define IWL100_UCODE_API_MAX 5 /* Oldest version we won't warn about */ #define IWL1000_UCODE_API_OK 5 @@ -226,5 +226,5 @@ const struct iwl_cfg iwl100_bg_cfg = { IWL_DEVICE_100, }; -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 5635b9e..ea10862 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -51,10 +51,10 @@ #define IWL135_UCODE_API_MAX 6 /* Oldest version we won't warn about */ -#define IWL2030_UCODE_API_OK 5 -#define IWL2000_UCODE_API_OK 5 -#define IWL105_UCODE_API_OK 5 -#define IWL135_UCODE_API_OK 5 +#define IWL2030_UCODE_API_OK 6 +#define IWL2000_UCODE_API_OK 6 +#define IWL105_UCODE_API_OK 6 +#define IWL135_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL2030_UCODE_API_MIN 5 @@ -328,7 +328,7 @@ const struct iwl_cfg iwl135_bgn_cfg = { .ht_params = &iwl2000_ht_params, }; -MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_OK)); +MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_OK)); +MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a805e97..de0920c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -51,6 +51,10 @@ #define IWL5000_UCODE_API_MAX 5 #define IWL5150_UCODE_API_MAX 2 +/* Oldest version we won't warn about */ +#define IWL5000_UCODE_API_OK 5 +#define IWL5150_UCODE_API_OK 2 + /* Lowest firmware API version supported */ #define IWL5000_UCODE_API_MIN 1 #define IWL5150_UCODE_API_MIN 1 @@ -326,6 +330,7 @@ static const struct iwl_ht_params iwl5000_ht_params = { #define IWL_DEVICE_5000 \ .fw_name_pre = IWL5000_FW_PRE, \ .ucode_api_max = IWL5000_UCODE_API_MAX, \ + .ucode_api_ok = IWL5000_UCODE_API_OK, \ .ucode_api_min = IWL5000_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -371,6 +376,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { .name = "Intel(R) WiMAX/WiFi Link 5350 AGN", .fw_name_pre = IWL5000_FW_PRE, .ucode_api_max = IWL5000_UCODE_API_MAX, + .ucode_api_ok = IWL5000_UCODE_API_OK, .ucode_api_min = IWL5000_UCODE_API_MIN, .max_inst_size = IWLAGN_RTC_INST_SIZE, .max_data_size = IWLAGN_RTC_DATA_SIZE, @@ -386,6 +392,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { #define IWL_DEVICE_5150 \ .fw_name_pre = IWL5150_FW_PRE, \ .ucode_api_max = IWL5150_UCODE_API_MAX, \ + .ucode_api_ok = IWL5150_UCODE_API_OK, \ .ucode_api_min = IWL5150_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -409,5 +416,5 @@ const struct iwl_cfg iwl5150_abg_cfg = { IWL_DEVICE_5150, }; -MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 64060cd..b1b6951 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -53,6 +53,8 @@ /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 +#define IWL6050_UCODE_API_OK 5 +#define IWL6000G2B_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 @@ -334,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -557,6 +559,6 @@ const struct iwl_cfg iwl6000_3agn_cfg = { }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); -- cgit v1.1 From afa762f6871a8cb05fbef5d0f83fac14304aa816 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 23 Apr 2012 14:45:15 +0300 Subject: mac80211: call ieee80211_mgd_stop() on interface stop ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [] (dump_stack+0x20/0x24) [ 4809.065385] [] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [] (platform_drv_remove+0x24/0x28) [ 4809.212029] [] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [] (device_release_driver+0x30/0x3c) [ 4809.233099] [] (bus_remove_device+0x10c/0x128) [ 4809.242620] [] (device_del+0x11c/0x17c) [ 4809.252150] [] (platform_device_del+0x28/0x68) [ 4809.263051] [] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [] (driver_detach+0x9c/0xc4) [ 4809.303163] [] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [] (driver_unregister+0x70/0x7c) [ 4809.323220] [] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/iface.c | 4 ++-- net/mac80211/mlme.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d9798a3..db8fae5 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1210,7 +1210,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata); +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 401c01f..c20051b 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -486,6 +486,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, /* free all potentially still buffered bcast frames */ local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf); skb_queue_purge(&sdata->u.ap.ps_bc_buf); + } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { + ieee80211_mgd_stop(sdata); } if (going_down) @@ -644,8 +646,6 @@ static void ieee80211_teardown_sdata(struct net_device *dev) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_rmc_free(sdata); - else if (sdata->vif.type == NL80211_IFTYPE_STATION) - ieee80211_mgd_teardown(sdata); flushed = sta_info_flush(local, sdata); WARN_ON(flushed); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f76da5b..20c680b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3497,7 +3497,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata) +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; -- cgit v1.1 From 569a3aff70e880588fe4b3f1622ac60abbeb4a28 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Thu, 19 Apr 2012 17:01:00 +0000 Subject: e1000e: MSI interrupt test failed, using legacy interrupt Following logs where seen on Systems with multiple NICs, while using MSI interrupts as shown below: Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0d.0: lan0_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: wan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: lan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.warn kernel: 0000:40:0e.0: wan4_0: MSI interrupt test failed, using legacy interrupt. Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0e.0: wan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0e.0: lan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: wan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: lan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: wan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: lan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0e.0: lan4_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: wan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: lan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX This patch fixes this problem by increasing the msleep from 50 to 100. Signed-off-by: Prasanna S Panchamukhi Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 19ab215..9520a6a 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); - msleep(50); + msleep(100); e1000_irq_disable(adapter); -- cgit v1.1 From 727c356f4d799b53f94cf8fe43e19d64482348c7 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 Apr 2012 08:51:45 +0000 Subject: e1000e: Fix default interrupt throttle rate not set in NIC HW Based on the original patch from Ying Cai This change ensures that the itr/itr_setting adjustment logic is used, even for the default/compiled-in value. Context: When we changed the default InterruptThrottleRate value from default (3 = dynamic mode) to 8000 for example, only adapter->itr_setting (which controls interrupt coalescing mode) was set to 8000, but adapter->itr (which controls the value set in NIC register) was not updated accordingly. So from ethtool, it seemed the interrupt throttling is enabled at 8000 intr/s, but the NIC actually was running in dynamic mode which has lower CPU efficiency especially when throughput is not high. CC: Ying Cai CC: David Decotigny Signed-off-by: Jeff Kirsher Tested-by: Aaron Brown --- drivers/net/ethernet/intel/e1000e/param.c | 99 +++++++++++++++++-------------- 1 file changed, 53 insertions(+), 46 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index ff796e4..16adeb9 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); /* * Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative */ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 @@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) if (num_InterruptThrottleRate > bd) { adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - e_info("%s turned off\n", opt.name); - break; - case 1: - e_info("%s set to dynamic mode\n", opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 3: - e_info("%s set to dynamic conservative mode\n", - opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 4: - e_info("%s set to simplified (2000-8000 ints) " - "mode\n", opt.name); - adapter->itr_setting = 4; - break; - default: - /* - * Save the setting, because the dynamic bits - * change itr. - */ - if (e1000_validate_option(&adapter->itr, &opt, - adapter) && - (adapter->itr == 3)) { - /* - * In case of invalid user value, - * default to conservative mode. - */ - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - } else { - /* - * Clear the lower two bits because - * they are used as control. - */ - adapter->itr_setting = - adapter->itr & ~3; - } - break; - } + + /* + * Make sure a message is printed for non-special + * values. And in case of an invalid option, display + * warning, use default and got through itr/itr_setting + * adjustment logic below + */ + if ((adapter->itr > 4) && + e1000_validate_option(&adapter->itr, &opt, adapter)) + adapter->itr = opt.def; } else { - adapter->itr_setting = opt.def; + /* + * If no option specified, use default value and go + * through the logic below to adjust itr/itr_setting + */ + adapter->itr = opt.def; + + /* + * Make sure a message is printed for non-special + * default values + */ + if (adapter->itr > 40) + e_info("%s set to default %d\n", opt.name, + adapter->itr); + } + + adapter->itr_setting = adapter->itr; + switch (adapter->itr) { + case 0: + e_info("%s turned off\n", opt.name); + break; + case 1: + e_info("%s set to dynamic mode\n", opt.name); + adapter->itr = 20000; + break; + case 3: + e_info("%s set to dynamic conservative mode\n", + opt.name); adapter->itr = 20000; + break; + case 4: + e_info("%s set to simplified (2000-8000 ints) mode\n", + opt.name); + break; + default: + /* + * Save the setting, because the dynamic bits + * change itr. + * + * Clear the lower two bits because + * they are used as control. + */ + adapter->itr_setting &= ~3; + break; } } { /* Interrupt Mode */ -- cgit v1.1 From 7118c07a844d367560ee91adb2071bde2fabcdbf Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Sat, 14 Apr 2012 12:37:46 -0400 Subject: ipvs: Verify that IP_VS protocol has been registered The registration of a protocol might fail, there were no checks and all registrations were assumed to be correct. This lead to NULL ptr dereferences when apps tried registering. For example: [ 1293.226051] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 1293.227038] IP: [] tcp_register_app+0x60/0xb0 [ 1293.227038] PGD 391de067 PUD 6c20b067 PMD 0 [ 1293.227038] Oops: 0000 [#1] PREEMPT SMP [ 1293.227038] CPU 1 [ 1293.227038] Pid: 19609, comm: trinity Tainted: G W 3.4.0-rc1-next-20120405-sasha-dirty #57 [ 1293.227038] RIP: 0010:[] [] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP: 0018:ffff880038c1dd18 EFLAGS: 00010286 [ 1293.227038] RAX: ffffffffffffffc0 RBX: 0000000000001500 RCX: 0000000000010000 [ 1293.227038] RDX: 0000000000000000 RSI: ffff88003a2d5888 RDI: 0000000000000282 [ 1293.227038] RBP: ffff880038c1dd48 R08: 0000000000000000 R09: 0000000000000000 [ 1293.227038] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003a2d5668 [ 1293.227038] R13: ffff88003a2d5988 R14: ffff8800696a8ff8 R15: 0000000000000000 [ 1293.227038] FS: 00007f01930d9700(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 1293.227038] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1293.227038] CR2: 0000000000000018 CR3: 0000000065dfc000 CR4: 00000000000406e0 [ 1293.227038] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.227038] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1293.227038] Process trinity (pid: 19609, threadinfo ffff880038c1c000, task ffff88002dc73000) [ 1293.227038] Stack: [ 1293.227038] ffff880038c1dd48 00000000fffffff4 ffff8800696aada0 ffff8800694f5580 [ 1293.227038] ffffffff8369f1e0 0000000000001500 ffff880038c1dd98 ffffffff822a716b [ 1293.227038] 0000000000000000 ffff8800696a8ff8 0000000000000015 ffff8800694f5580 [ 1293.227038] Call Trace: [ 1293.227038] [] ip_vs_app_inc_new+0xdb/0x180 [ 1293.227038] [] register_ip_vs_app_inc+0x48/0x70 [ 1293.227038] [] __ip_vs_ftp_init+0xba/0x140 [ 1293.227038] [] ops_init+0x80/0x90 [ 1293.227038] [] setup_net+0x5b/0xe0 [ 1293.227038] [] copy_net_ns+0x76/0x100 [ 1293.227038] [] create_new_namespaces+0xfb/0x190 [ 1293.227038] [] unshare_nsproxy_namespaces+0x61/0x80 [ 1293.227038] [] sys_unshare+0xff/0x290 [ 1293.227038] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1293.227038] [] system_call_fastpath+0x16/0x1b [ 1293.227038] Code: 89 c7 e8 34 91 3b 00 89 de 66 c1 ee 04 31 de 83 e6 0f 48 83 c6 22 48 c1 e6 04 4a 8b 14 26 49 8d 34 34 48 8d 42 c0 48 39 d6 74 13 <66> 39 58 58 74 22 48 8b 48 40 48 8d 41 c0 48 39 ce 75 ed 49 8d [ 1293.227038] RIP [] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP [ 1293.227038] CR2: 0000000000000018 [ 1293.379284] ---[ end trace 364ab40c7011a009 ]--- [ 1293.381182] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Sasha Levin Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_proto.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c index f843a88..a62360e 100644 --- a/net/netfilter/ipvs/ip_vs_proto.c +++ b/net/netfilter/ipvs/ip_vs_proto.c @@ -59,9 +59,6 @@ static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp) return 0; } -#if defined(CONFIG_IP_VS_PROTO_TCP) || defined(CONFIG_IP_VS_PROTO_UDP) || \ - defined(CONFIG_IP_VS_PROTO_SCTP) || defined(CONFIG_IP_VS_PROTO_AH) || \ - defined(CONFIG_IP_VS_PROTO_ESP) /* * register an ipvs protocols netns related data */ @@ -86,7 +83,6 @@ register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp) return 0; } -#endif /* * unregister an ipvs protocol @@ -316,22 +312,35 @@ ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp, */ int __net_init ip_vs_protocol_net_init(struct net *net) { + int i, ret; + static struct ip_vs_protocol *protos[] = { #ifdef CONFIG_IP_VS_PROTO_TCP - register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp); + &ip_vs_protocol_tcp, #endif #ifdef CONFIG_IP_VS_PROTO_UDP - register_ip_vs_proto_netns(net, &ip_vs_protocol_udp); + &ip_vs_protocol_udp, #endif #ifdef CONFIG_IP_VS_PROTO_SCTP - register_ip_vs_proto_netns(net, &ip_vs_protocol_sctp); + &ip_vs_protocol_sctp, #endif #ifdef CONFIG_IP_VS_PROTO_AH - register_ip_vs_proto_netns(net, &ip_vs_protocol_ah); + &ip_vs_protocol_ah, #endif #ifdef CONFIG_IP_VS_PROTO_ESP - register_ip_vs_proto_netns(net, &ip_vs_protocol_esp); + &ip_vs_protocol_esp, #endif + }; + + for (i = 0; i < ARRAY_SIZE(protos); i++) { + ret = register_ip_vs_proto_netns(net, protos[i]); + if (ret < 0) + goto cleanup; + } return 0; + +cleanup: + ip_vs_protocol_net_cleanup(net); + return ret; } void __net_exit ip_vs_protocol_net_cleanup(struct net *net) -- cgit v1.1 From 8f9b9a2fad47af27e14b037395e03cd8278d96d7 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 13 Apr 2012 18:08:43 +0300 Subject: ipvs: fix crash in ip_vs_control_net_cleanup on unload commit 14e405461e664b777e2a5636e10b2ebf36a686ec (2.6.39) ("Add __ip_vs_control_{init,cleanup}_sysctl()") introduced regression due to wrong __net_init for __ip_vs_control_cleanup_sysctl. This leads to crash when the ip_vs module is unloaded. Fix it by changing __net_init to __net_exit for the function that is already renamed to ip_vs_control_net_cleanup_sysctl. Signed-off-by: Julian Anastasov Signed-off-by: Hans Schillstrom Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index b3afe18..376d2b1 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3680,7 +3680,7 @@ int __net_init ip_vs_control_net_init_sysctl(struct net *net) return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -3692,7 +3692,7 @@ void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) #else int __net_init ip_vs_control_net_init_sysctl(struct net *net) { return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) { } +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { } #endif -- cgit v1.1 From da3a9e9e7b8341cfc939818103cb7ef9f5293de2 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 25 Apr 2012 04:49:20 +0000 Subject: tlan: add cast needed for proper 64 bit operation Changes this beauty into a statement that actually has an effect on amd64. Tested-by: Per Jessen Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/tlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 817ad3b..efd3669 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -228,7 +228,7 @@ tlan_get_skb(const struct tlan_list *tag) unsigned long addr; addr = tag->buffer[9].address; - addr |= (tag->buffer[8].address << 16) << 16; + addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; return (struct sk_buff *) addr; } -- cgit v1.1 From f891ea1634ce41f5f47ae40d8594809f4cd2ca66 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 24 Apr 2012 13:37:01 +0000 Subject: tg3: Avoid panic from reserved statblk field access When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 062ac33..ceeab8e 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -879,8 +879,13 @@ static inline unsigned int tg3_has_work(struct tg3_napi *tnapi) if (sblk->status & SD_STATUS_LINK_CHG) work_exists = 1; } - /* check for RX/TX work to do */ - if (sblk->idx[0].tx_consumer != tnapi->tx_cons || + + /* check for TX work to do */ + if (sblk->idx[0].tx_consumer != tnapi->tx_cons) + work_exists = 1; + + /* check for RX work to do */ + if (tnapi->rx_rcb_prod_idx && *(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr) work_exists = 1; @@ -6124,6 +6129,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget) return work_done; } + if (!tnapi->rx_rcb_prod_idx) + return work_done; + /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with tg3->napi.poll() @@ -7567,6 +7575,12 @@ static int tg3_alloc_consistent(struct tg3 *tp) */ switch (i) { default: + if (tg3_flag(tp, ENABLE_RSS)) { + tnapi->rx_rcb_prod_idx = NULL; + break; + } + /* Fall through */ + case 1: tnapi->rx_rcb_prod_idx = &sblk->idx[0].rx_producer; break; case 2: -- cgit v1.1 From 62ad6fcd743792bf294f2a7ba26ab8f462065150 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 24 Apr 2012 18:15:41 +0000 Subject: udp_diag: implement idiag_get_info for udp/udplite to get queue information When we use netlink to monitor queue information for udp socket, idiag_rqueue and idiag_wqueue of inet_diag_msg are returned with 0. Keep consistent with netstat, just return back allocated rmem/wmem size. Signed-off-by: Shan Wei Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/inet_diag.c | 2 +- net/ipv4/udp_diag.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 8d25a1c..8f8db72 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -141,7 +141,7 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk, goto rtattr_failure; if (icsk == NULL) { - r->idiag_rqueue = r->idiag_wqueue = 0; + handler->idiag_get_info(sk, r, NULL); goto out; } diff --git a/net/ipv4/udp_diag.c b/net/ipv4/udp_diag.c index 8a949f1..a7f86a3 100644 --- a/net/ipv4/udp_diag.c +++ b/net/ipv4/udp_diag.c @@ -146,9 +146,17 @@ static int udp_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr *nlh, return udp_dump_one(&udp_table, in_skb, nlh, req); } +static void udp_diag_get_info(struct sock *sk, struct inet_diag_msg *r, + void *info) +{ + r->idiag_rqueue = sk_rmem_alloc_get(sk); + r->idiag_wqueue = sk_wmem_alloc_get(sk); +} + static const struct inet_diag_handler udp_diag_handler = { .dump = udp_diag_dump, .dump_one = udp_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDP, }; @@ -167,6 +175,7 @@ static int udplite_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr * static const struct inet_diag_handler udplite_diag_handler = { .dump = udplite_diag_dump, .dump_one = udplite_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDPLITE, }; -- cgit v1.1 From 8d08d71ce59438a6ef06be5db07966e0c144b74e Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 25 Apr 2012 00:29:59 +0300 Subject: ipvs: add check in ftp for initialized core Avoid crash when registering ip_vs_ftp after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Julian Anastasov Acked-by: Hans Schillstrom Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_ftp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c index 538d74e..e39f693 100644 --- a/net/netfilter/ipvs/ip_vs_ftp.c +++ b/net/netfilter/ipvs/ip_vs_ftp.c @@ -439,6 +439,8 @@ static int __net_init __ip_vs_ftp_init(struct net *net) struct ip_vs_app *app; struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; app = kmemdup(&ip_vs_ftp, sizeof(struct ip_vs_app), GFP_KERNEL); if (!app) return -ENOMEM; -- cgit v1.1 From 39f618b4fd95ae243d940ec64c961009c74e3333 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 25 Apr 2012 00:29:58 +0300 Subject: ipvs: reset ipvs pointer in netns Make sure net->ipvs is reset on netns cleanup or failed initialization. It is needed for IPVS applications to know that IPVS core is not loaded in netns. Signed-off-by: Julian Anastasov Acked-by: Hans Schillstrom Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 2555816..260b9ef 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1924,6 +1924,7 @@ protocol_fail: control_fail: ip_vs_estimator_net_cleanup(net); estimator_fail: + net->ipvs = NULL; return -ENOMEM; } @@ -1936,6 +1937,7 @@ static void __net_exit __ip_vs_cleanup(struct net *net) ip_vs_control_net_cleanup(net); ip_vs_estimator_net_cleanup(net); IP_VS_DBG(2, "ipvs netns %d released\n", net_ipvs(net)->gen); + net->ipvs = NULL; } static void __net_exit __ip_vs_dev_cleanup(struct net *net) -- cgit v1.1 From 5d384574e8bceb9bada323da8044ca43e621886b Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:11 +0000 Subject: ehea: fix allmulticast support There was a bug in the mask of regtype parameter for registering a multicast filter. It was ignoring the scope bit, which was wrongly being used for all filters. The SCOPE_ALL value adds a filter that allows all multicast packets and ignores the MAC parameter, just what allmulticast needs. The normals filters, however, should not use SCOPE_ALL. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 24 +++++++++++++++--------- drivers/net/ethernet/ibm/ehea/ehea_phyp.h | 2 +- 2 files changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index acf34b6..9dcb5fd 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -290,16 +290,18 @@ static void ehea_update_bcmc_registrations(void) arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; num_registrations -= 2; } @@ -1838,8 +1840,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, u64 hret; u8 reg_type; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_UNTAGGED; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1847,8 +1850,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, if (hret) goto out; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_VLANID_ALL; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1898,7 +1902,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed enabling IFF_ALLMULTI\n"); } - } else + } else { if (!enable) { /* Disable ALLMULTI */ hret = ehea_multicast_reg_helper(port, 0, H_DEREG_BCMC); @@ -1908,6 +1912,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed disabling IFF_ALLMULTI\n"); } + } } static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr) @@ -2463,6 +2468,7 @@ static int ehea_down(struct net_device *dev) return 0; ehea_drop_multicast_list(dev); + ehea_allmulti(dev, 0); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); ehea_free_interrupts(dev); diff --git a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h index 52c456e..8364815 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h +++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h @@ -450,7 +450,7 @@ u64 ehea_h_modify_ehea_port(const u64 adapter_handle, const u16 port_num, void *cb_addr); #define H_REGBCMC_PN EHEA_BMASK_IBM(48, 63) -#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(61, 63) +#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(60, 63) #define H_REGBCMC_MACADDR EHEA_BMASK_IBM(16, 63) #define H_REGBCMC_VLANID EHEA_BMASK_IBM(52, 63) -- cgit v1.1 From 47d59d01322f60d1c46fdf2650e0613daa8ce637 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:12 +0000 Subject: ehea: fix promiscuous mode commit a4910b744486254cfa61995954c118fb2283c4fd has broken promiscuous mode, which is never set. port->promisc just reflects the last setting of PROMISCUOUS mode to avoid doing an extra hypercall when it's already set. However, since it may fail because of hypervisor permissions, we should still respect the multicast settings and not simply exit after setting promiscuous mode. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 9dcb5fd..c9069a2 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1946,11 +1946,7 @@ static void ehea_set_multicast_list(struct net_device *dev) struct netdev_hw_addr *ha; int ret; - if (port->promisc) { - ehea_promiscuous(dev, 1); - return; - } - ehea_promiscuous(dev, 0); + ehea_promiscuous(dev, !!(dev->flags & IFF_PROMISC)); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); -- cgit v1.1 From 0848e4043014631d792a66266d6d7d64a7f21da5 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:56 +0000 Subject: 6lowpan: fix segmentation fault caused by mlme request Add nescesary mlme callbacks to satisfy "iz list" request from user space. Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe to a real phy to which 6lowpan is attached. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 3685158..f6b1694 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1044,6 +1044,24 @@ static void lowpan_dev_free(struct net_device *dev) free_netdev(dev); } +static struct wpan_phy *lowpan_get_phy(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_phy(real_dev); +} + +static u16 lowpan_get_pan_id(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_pan_id(real_dev); +} + +static u16 lowpan_get_short_addr(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_short_addr(real_dev); +} + static struct header_ops lowpan_header_ops = { .create = lowpan_header_create, }; @@ -1053,6 +1071,12 @@ static const struct net_device_ops lowpan_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; +static struct ieee802154_mlme_ops lowpan_mlme = { + .get_pan_id = lowpan_get_pan_id, + .get_phy = lowpan_get_phy, + .get_short_addr = lowpan_get_short_addr, +}; + static void lowpan_setup(struct net_device *dev) { pr_debug("(%s)\n", __func__); @@ -1070,6 +1094,7 @@ static void lowpan_setup(struct net_device *dev) dev->netdev_ops = &lowpan_netdev_ops; dev->header_ops = &lowpan_header_ops; + dev->ml_priv = &lowpan_mlme; dev->destructor = lowpan_dev_free; } -- cgit v1.1 From 8deff4af8745561efd2be34ee30cc57a6f0107c6 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:57 +0000 Subject: 6lowpan: clean up fragments list if module unloaded Clean all the pending fragments and relative timers if 6lowpan link is going to be deleted. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index f6b1694..b3021f7 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1177,11 +1177,20 @@ static void lowpan_dellink(struct net_device *dev, struct list_head *head) { struct lowpan_dev_info *lowpan_dev = lowpan_dev_info(dev); struct net_device *real_dev = lowpan_dev->real_dev; - struct lowpan_dev_record *entry; - struct lowpan_dev_record *tmp; + struct lowpan_dev_record *entry, *tmp; + struct lowpan_fragment *frame, *tframe; ASSERT_RTNL(); + spin_lock(&flist_lock); + list_for_each_entry_safe(frame, tframe, &lowpan_fragments, list) { + del_timer(&frame->timer); + list_del(&frame->list); + dev_kfree_skb(frame->skb); + kfree(frame); + } + spin_unlock(&flist_lock); + mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx); list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) { if (entry->ldev == dev) { -- cgit v1.1 From 768f7c7c121e80f458a9d013b2e8b169e5dfb1e5 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:58 +0000 Subject: 6lowpan: add missing spin_lock_init() Add missing spin_lock_init() for frames list lock. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index b3021f7..840821b 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1168,6 +1168,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev, list_add_tail(&entry->list, &lowpan_devices); mutex_unlock(&lowpan_dev_info(dev)->dev_list_mtx); + spin_lock_init(&flist_lock); + register_netdevice(dev); return 0; -- cgit v1.1 From 1bb57e940e1958e40d51f2078f50c3a96a9b2d75 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 25 Apr 2012 14:32:09 +0000 Subject: dl2k: Clean up rio_ioctl The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by: Stephan Mueller Signed-off-by: Jeff Mahoney Signed-off-by: David S. Miller --- drivers/net/ethernet/dlink/dl2k.c | 52 +++++++-------------------------------- drivers/net/ethernet/dlink/dl2k.h | 7 ------ 2 files changed, 9 insertions(+), 50 deletions(-) diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index b2dc2c8..2e09edb 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1259,55 +1259,21 @@ rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) { int phy_addr; struct netdev_private *np = netdev_priv(dev); - struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; - - struct netdev_desc *desc; - int i; + struct mii_ioctl_data *miidata = if_mii(rq); phy_addr = np->phy_addr; switch (cmd) { - case SIOCDEVPRIVATE: - break; - - case SIOCDEVPRIVATE + 1: - miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); + case SIOCGMIIPHY: + miidata->phy_id = phy_addr; break; - case SIOCDEVPRIVATE + 2: - mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); + case SIOCGMIIREG: + miidata->val_out = mii_read (dev, phy_addr, miidata->reg_num); break; - case SIOCDEVPRIVATE + 3: - break; - case SIOCDEVPRIVATE + 4: - break; - case SIOCDEVPRIVATE + 5: - netif_stop_queue (dev); + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + mii_write (dev, phy_addr, miidata->reg_num, miidata->val_in); break; - case SIOCDEVPRIVATE + 6: - netif_wake_queue (dev); - break; - case SIOCDEVPRIVATE + 7: - printk - ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", - netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, - np->old_rx); - break; - case SIOCDEVPRIVATE + 8: - printk("TX ring:\n"); - for (i = 0; i < TX_RING_SIZE; i++) { - desc = &np->tx_ring[i]; - printk - ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", - i, - (u32) (np->tx_ring_dma + i * sizeof (*desc)), - (u32)le64_to_cpu(desc->next_desc), - (u32)le64_to_cpu(desc->status), - (u32)(le64_to_cpu(desc->fraginfo) >> 32), - (u32)le64_to_cpu(desc->fraginfo)); - printk ("\n"); - } - printk ("\n"); - break; - default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index ba0adca..30c2da3 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -365,13 +365,6 @@ struct ioctl_data { char *data; }; -struct mii_data { - __u16 reserved; - __u16 reg_num; - __u16 in_value; - __u16 out_value; -}; - /* The Rx and Tx buffer descriptors. */ struct netdev_desc { __le64 next_desc; -- cgit v1.1 From 07d69d4238418746a7b85c5d05ec17c658a2a390 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Mon, 23 Apr 2012 04:05:20 +0000 Subject: smsc95xx: mark link down on startup and let PHY interrupt deal with carrier changes Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by: Paolo Pisati Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 53a1ba5..94ae669 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1192,7 +1192,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { -- cgit v1.1 From 8b6efb75e9467f7c2df279cbd657f741ec3493cf Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 26 Apr 2012 10:27:18 +0000 Subject: MAINTAINERS: update sctp maintainer address Update my email address. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index bb76fc4..57bc677 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5892,11 +5892,11 @@ F: Documentation/scsi/st.txt F: drivers/scsi/st* SCTP PROTOCOL -M: Vlad Yasevich +M: Vlad Yasevich M: Sridhar Samudrala L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net -S: Supported +S: Maintained F: Documentation/networking/sctp.txt F: include/linux/sctp.h F: include/net/sctp/ -- cgit v1.1 From 651913ce9de2bbcedef608c5d6cf39c244248509 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Fri, 27 Apr 2012 11:29:37 -0400 Subject: tcp: clean up use of jiffies in tcp_rcv_rtt_measure() Clean up a reference to jiffies in tcp_rcv_rtt_measure() that should instead reference tcp_time_stamp. Since the result of the subtraction is passed into a function taking u32, this should not change any behavior (and indeed the generated assembly does not change on x86_64). However, it seems worth cleaning this up for consistency and clarity (and perhaps to avoid bugs if this is copied and pasted somewhere else). Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 3ff36406..2a702e3 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -495,7 +495,7 @@ static inline void tcp_rcv_rtt_measure(struct tcp_sock *tp) goto new_measure; if (before(tp->rcv_nxt, tp->rcv_rtt_est.seq)) return; - tcp_rcv_rtt_update(tp, jiffies - tp->rcv_rtt_est.time, 1); + tcp_rcv_rtt_update(tp, tcp_time_stamp - tp->rcv_rtt_est.time, 1); new_measure: tp->rcv_rtt_est.seq = tp->rcv_nxt + tp->rcv_wnd; -- cgit v1.1 From 1cc2699057bafc512137272e1e848640bad14a41 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:52 -0700 Subject: brcm80211: fmac: fix SDIO function 0 register r/w issue SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Reviewed-by: Florian Fainelli Reviewed-by: Johannes Berg Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 4688904..758c115 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -108,9 +108,15 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, sdio_release_host(sdfunc); } } else if (regaddr == SDIO_CCCR_ABORT) { + sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), + GFP_KERNEL); + if (!sdfunc) + return -ENOMEM; + sdfunc->num = 0; sdio_claim_host(sdfunc); sdio_writeb(sdfunc, *byte, regaddr, &err_ret); sdio_release_host(sdfunc); + kfree(sdfunc); } else if (regaddr < 0xF0) { brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr); err_ret = -EPERM; @@ -486,7 +492,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, kfree(bus_if); return -ENOMEM; } - sdiodev->func[0] = func->card->sdio_func[0]; + sdiodev->func[0] = func; sdiodev->func[1] = func; sdiodev->bus_if = bus_if; bus_if->bus_priv.sdio = sdiodev; -- cgit v1.1 From b948a85c1f26d48395de8c6c7e392f008f1be666 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:53 -0700 Subject: brcm80211: fmac: fix missing completion events issue dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 63 +++++++++++++++++----- 1 file changed, 51 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2bf5dda..eb3829b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -574,6 +574,8 @@ struct brcmf_sdio { struct task_struct *dpc_tsk; struct completion dpc_wait; + struct list_head dpc_tsklst; + spinlock_t dpc_tl_lock; struct semaphore sdsem; @@ -2594,29 +2596,58 @@ clkwait: return resched; } +static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus) +{ + struct list_head *new_hd; + unsigned long flags; + + if (in_interrupt()) + new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC); + else + new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL); + if (new_hd == NULL) + return; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_add_tail(new_hd, &bus->dpc_tsklst); + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); +} + static int brcmf_sdbrcm_dpc_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *) data; + struct list_head *cur_hd, *tmp_hd; + unsigned long flags; allow_signal(SIGTERM); /* Run until signal received */ while (1) { if (kthread_should_stop()) break; - if (!wait_for_completion_interruptible(&bus->dpc_wait)) { - /* Call bus dpc unless it indicated down - (then clean stop) */ - if (bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN) { - if (brcmf_sdbrcm_dpc(bus)) - complete(&bus->dpc_wait); - } else { + + if (list_empty(&bus->dpc_tsklst)) + if (wait_for_completion_interruptible(&bus->dpc_wait)) + break; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) { + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); + + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; break; } - } else - break; + + if (brcmf_sdbrcm_dpc(bus)) + brcmf_sdbrcm_adddpctsk(bus); + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_del(cur_hd); + kfree(cur_hd); + } + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); } return 0; } @@ -2669,8 +2700,10 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) /* Schedule DPC if needed to send queued packet(s) */ if (!bus->dpc_sched) { bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } return ret; @@ -3514,8 +3547,10 @@ void brcmf_sdbrcm_isr(void *arg) brcmf_dbg(ERROR, "isr w/o interrupt configured!\n"); bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) @@ -3559,8 +3594,10 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->ipend = true; bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } } @@ -3897,6 +3934,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* Initialize DPC thread */ init_completion(&bus->dpc_wait); + INIT_LIST_HEAD(&bus->dpc_tsklst); + spin_lock_init(&bus->dpc_tl_lock); bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread, bus, "brcmf_dpc"); if (IS_ERR(bus->dpc_tsk)) { -- cgit v1.1 From 3708dc248946daba8802c8f31a68dca81ffc445f Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Tue, 24 Apr 2012 05:20:15 -0400 Subject: ath5k: add missing iounmap to AHB probe removal When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by: Jonathan Bither Reviewed-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8c50d9d..aec33cc 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -220,6 +220,7 @@ static int ath_ahb_remove(struct platform_device *pdev) } ath5k_deinit_ah(ah); + iounmap(ah->iobase); platform_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); -- cgit v1.1 From 1ed2ec37b44e86eaa8e0a03b908a39c80f65ee45 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 25 Apr 2012 08:10:08 -0700 Subject: iwlwifi: use 6000G2B for 6030 device series "iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index b1b6951..f0c9150 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -336,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -390,7 +390,7 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = { #define IWL_DEVICE_6030 \ .fw_name_pre = IWL6030_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ -- cgit v1.1 From dbdedbdf4fbff3d4962a0786f37aa86dfdc48a7e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 25 Apr 2012 17:28:00 -0500 Subject: b43: only reload config after successful initialization Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau Cc: Signed-off-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c79e663..e4d6dc2 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4827,8 +4827,14 @@ static int b43_op_start(struct ieee80211_hw *hw) out_mutex_unlock: mutex_unlock(&wl->mutex); - /* reload configuration */ - b43_op_config(hw, ~0); + /* + * Configuration may have been overwritten during initialization. + * Reload the configuration, but only if initialization was + * successful. Reloading the configuration after a failed init + * may hang the system. + */ + if (!err) + b43_op_config(hw, ~0); return err; } -- cgit v1.1 From 328c32f0f85467af5a6c4c3289e168d9ad2555af Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:43 +0300 Subject: wl1251: fix crash on remove due to premature kfree Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c index f786942..1b851f6 100644 --- a/drivers/net/wireless/wl1251/sdio.c +++ b/drivers/net/wireless/wl1251/sdio.c @@ -315,8 +315,8 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func) if (wl->irq) free_irq(wl->irq, wl); - kfree(wl_sdio); wl1251_free_hw(wl); + kfree(wl_sdio); sdio_claim_host(func); sdio_release_irq(func); -- cgit v1.1 From 4c1bcdb5a3354b250b82a67549f57ac27a3bb85f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:44 +0300 Subject: wl1251: fix crash on remove due to leftover work item This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index 41302c7..d1afb8e 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -479,6 +479,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&wl->irq_work); cancel_work_sync(&wl->tx_work); cancel_work_sync(&wl->filter_work); + cancel_delayed_work_sync(&wl->elp_work); mutex_lock(&wl->mutex); -- cgit v1.1 From cde2e9a651b76d8db36ae94cd0febc82b637e5dd Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 27 Apr 2012 10:11:48 +0000 Subject: drop_monitor: fix sleeping in invalid context warning Eric Dumazet pointed out this warning in the drop_monitor protocol to me: [ 38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch [ 38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71 [ 38.352582] Call Trace: [ 38.352592] [] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352599] [] __might_sleep+0xca/0xf0 [ 38.352606] [] mutex_lock+0x26/0x50 [ 38.352610] [] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352616] [] tracepoint_probe_register+0x29/0x90 [ 38.352621] [] set_all_monitor_traces+0x105/0x170 [ 38.352625] [] net_dm_cmd_trace+0x2a/0x40 [ 38.352630] [] genl_rcv_msg+0x21a/0x2b0 [ 38.352636] [] ? zone_statistics+0x99/0xc0 [ 38.352640] [] ? genl_rcv+0x30/0x30 [ 38.352645] [] netlink_rcv_skb+0xa9/0xd0 [ 38.352649] [] genl_rcv+0x20/0x30 [ 38.352653] [] netlink_unicast+0x1ae/0x1f0 [ 38.352658] [] netlink_sendmsg+0x2b6/0x310 [ 38.352663] [] sock_sendmsg+0x10f/0x130 [ 38.352668] [] ? move_addr_to_kernel+0x60/0xb0 [ 38.352673] [] ? verify_iovec+0x64/0xe0 [ 38.352677] [] __sys_sendmsg+0x386/0x390 [ 38.352682] [] ? handle_mm_fault+0x139/0x210 [ 38.352687] [] ? do_page_fault+0x1ec/0x4f0 [ 38.352693] [] ? set_next_entity+0x9d/0xb0 [ 38.352699] [] ? tty_ldisc_deref+0x9/0x10 [ 38.352703] [] ? pick_next_task_fair+0x63/0x140 [ 38.352708] [] sys_sendmsg+0x44/0x80 [ 38.352713] [] system_call_fastpath+0x16/0x1b It stems from holding a spinlock (trace_state_lock) while attempting to register or unregister tracepoint hooks, making in_atomic() true in this context, leading to the warning when the tracepoint calls might_sleep() while its taking a mutex. Since we only use the trace_state_lock to prevent trace protocol state races, as well as hardware stat list updates on an rcu write side, we can just convert the spinlock to a mutex to avoid this problem. Signed-off-by: Neil Horman Reported-by: Eric Dumazet CC: David Miller Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 5c3c81a..a221a5b 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -42,7 +42,7 @@ static void send_dm_alert(struct work_struct *unused); * netlink alerts */ static int trace_state = TRACE_OFF; -static DEFINE_SPINLOCK(trace_state_lock); +static DEFINE_MUTEX(trace_state_mutex); struct per_cpu_dm_data { struct work_struct dm_alert_work; @@ -214,7 +214,7 @@ static int set_all_monitor_traces(int state) struct dm_hw_stat_delta *new_stat = NULL; struct dm_hw_stat_delta *temp; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); if (state == trace_state) { rc = -EAGAIN; @@ -253,7 +253,7 @@ static int set_all_monitor_traces(int state) rc = -EINPROGRESS; out_unlock: - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); return rc; } @@ -296,12 +296,12 @@ static int dropmon_net_event(struct notifier_block *ev_block, new_stat->dev = dev; new_stat->last_rx = jiffies; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_add_rcu(&new_stat->list, &hw_stats_list); - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; case NETDEV_UNREGISTER: - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) { if (new_stat->dev == dev) { new_stat->dev = NULL; @@ -312,7 +312,7 @@ static int dropmon_net_event(struct notifier_block *ev_block, } } } - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; } out: -- cgit v1.1 From 3885ca785a3618593226687ced84f3f336dc3860 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 27 Apr 2012 10:11:49 +0000 Subject: drop_monitor: Make updating data->skb smp safe Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in its smp protections. Specifically, its possible to replace data->skb while its being written. This patch corrects that by making data->skb an rcu protected variable. That will prevent it from being overwritten while a tracepoint is modifying it. Signed-off-by: Neil Horman Reported-by: Eric Dumazet CC: David Miller Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 70 ++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 54 insertions(+), 16 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index a221a5b..7592943 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(trace_state_mutex); struct per_cpu_dm_data { struct work_struct dm_alert_work; - struct sk_buff *skb; + struct sk_buff __rcu *skb; atomic_t dm_hit_count; struct timer_list send_timer; }; @@ -73,35 +73,58 @@ static int dm_hit_limit = 64; static int dm_delay = 1; static unsigned long dm_hw_check_delta = 2*HZ; static LIST_HEAD(hw_stats_list); +static int initialized = 0; static void reset_per_cpu_data(struct per_cpu_dm_data *data) { size_t al; struct net_dm_alert_msg *msg; struct nlattr *nla; + struct sk_buff *skb; + struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1); al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); - data->skb = genlmsg_new(al, GFP_KERNEL); - genlmsg_put(data->skb, 0, 0, &net_drop_monitor_family, - 0, NET_DM_CMD_ALERT); - nla = nla_reserve(data->skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); - msg = nla_data(nla); - memset(msg, 0, al); - atomic_set(&data->dm_hit_count, dm_hit_limit); + skb = genlmsg_new(al, GFP_KERNEL); + + if (skb) { + genlmsg_put(skb, 0, 0, &net_drop_monitor_family, + 0, NET_DM_CMD_ALERT); + nla = nla_reserve(skb, NLA_UNSPEC, + sizeof(struct net_dm_alert_msg)); + msg = nla_data(nla); + memset(msg, 0, al); + } else if (initialized) + schedule_work_on(smp_processor_id(), &data->dm_alert_work); + + /* + * Don't need to lock this, since we are guaranteed to only + * run this on a single cpu at a time. + * Note also that we only update data->skb if the old and new skb + * pointers don't match. This ensures that we don't continually call + * synchornize_rcu if we repeatedly fail to alloc a new netlink message. + */ + if (skb != oskb) { + rcu_assign_pointer(data->skb, skb); + + synchronize_rcu(); + + atomic_set(&data->dm_hit_count, dm_hit_limit); + } + } static void send_dm_alert(struct work_struct *unused) { struct sk_buff *skb; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); /* * Grab the skb we're about to send */ - skb = data->skb; + skb = rcu_dereference_protected(data->skb, 1); /* * Replace it with a new one @@ -111,8 +134,10 @@ static void send_dm_alert(struct work_struct *unused) /* * Ship it! */ - genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + if (skb) + genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + put_cpu_var(dm_cpu_data); } /* @@ -123,9 +148,11 @@ static void send_dm_alert(struct work_struct *unused) */ static void sched_send_work(unsigned long unused) { - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + + schedule_work_on(smp_processor_id(), &data->dm_alert_work); - schedule_work(&data->dm_alert_work); + put_cpu_var(dm_cpu_data); } static void trace_drop_common(struct sk_buff *skb, void *location) @@ -134,9 +161,16 @@ static void trace_drop_common(struct sk_buff *skb, void *location) struct nlmsghdr *nlh; struct nlattr *nla; int i; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct sk_buff *dskb; + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + rcu_read_lock(); + dskb = rcu_dereference(data->skb); + + if (!dskb) + goto out; + if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) { /* * we're already at zero, discard this hit @@ -144,7 +178,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) goto out; } - nlh = (struct nlmsghdr *)data->skb->data; + nlh = (struct nlmsghdr *)dskb->data; nla = genlmsg_data(nlmsg_data(nlh)); msg = nla_data(nla); for (i = 0; i < msg->entries; i++) { @@ -158,7 +192,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) /* * We need to create a new entry */ - __nla_reserve_nohdr(data->skb, sizeof(struct net_dm_drop_point)); + __nla_reserve_nohdr(dskb, sizeof(struct net_dm_drop_point)); nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point)); memcpy(msg->points[msg->entries].pc, &location, sizeof(void *)); msg->points[msg->entries].count = 1; @@ -170,6 +204,8 @@ static void trace_drop_common(struct sk_buff *skb, void *location) } out: + rcu_read_unlock(); + put_cpu_var(dm_cpu_data); return; } @@ -375,6 +411,8 @@ static int __init init_net_drop_monitor(void) data->send_timer.function = sched_send_work; } + initialized = 1; + goto out; out_unreg: -- cgit v1.1 From 4b984cd50bc1b6d492175cd77bfabb78e76ffa67 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 09:45:34 +0200 Subject: ipvs: null check of net->ipvs in lblc(r) shedulers Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_lblc.c | 3 +++ net/netfilter/ipvs/ip_vs_lblcr.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 0f16283..caa4370 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -551,6 +551,9 @@ static int __net_init __ip_vs_lblc_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblc_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index eec797f..548bf37 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -745,6 +745,9 @@ static int __net_init __ip_vs_lblcr_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblcr_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), -- cgit v1.1 From 582b8e3eadaec77788c1aa188081a8d5059c42a6 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 09:45:35 +0200 Subject: ipvs: take care of return value from protocol init_netns ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- include/net/ip_vs.h | 2 +- net/netfilter/ipvs/ip_vs_proto.c | 11 +++++++++-- net/netfilter/ipvs/ip_vs_proto_sctp.c | 5 ++++- net/netfilter/ipvs/ip_vs_proto_tcp.c | 5 ++++- net/netfilter/ipvs/ip_vs_proto_udp.c | 5 ++++- 5 files changed, 22 insertions(+), 6 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 2bdee51..6d90dda 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -393,7 +393,7 @@ struct ip_vs_protocol { void (*exit)(struct ip_vs_protocol *pp); - void (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); + int (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); void (*exit_netns)(struct net *net, struct ip_vs_proto_data *pd); diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c index a62360e..ed835e6 100644 --- a/net/netfilter/ipvs/ip_vs_proto.c +++ b/net/netfilter/ipvs/ip_vs_proto.c @@ -78,8 +78,15 @@ register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp) ipvs->proto_data_table[hash] = pd; atomic_set(&pd->appcnt, 0); /* Init app counter */ - if (pp->init_netns != NULL) - pp->init_netns(net, pd); + if (pp->init_netns != NULL) { + int ret = pp->init_netns(net, pd); + if (ret) { + /* unlink an free proto data */ + ipvs->proto_data_table[hash] = pd->next; + kfree(pd); + return ret; + } + } return 0; } diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index 1fbf7a2..9f3fb75 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -1090,7 +1090,7 @@ out: * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -1098,6 +1098,9 @@ static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->sctp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)sctp_timeouts, sizeof(sctp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __ip_vs_sctp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c index ef8641f..cd609cc 100644 --- a/net/netfilter/ipvs/ip_vs_proto_tcp.c +++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c @@ -677,7 +677,7 @@ void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp) * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -685,7 +685,10 @@ static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->tcp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)tcp_timeouts, sizeof(tcp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; pd->tcp_state_table = tcp_states; + return 0; } static void __ip_vs_tcp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c index f4b7262..2fedb2d 100644 --- a/net/netfilter/ipvs/ip_vs_proto_udp.c +++ b/net/netfilter/ipvs/ip_vs_proto_udp.c @@ -467,7 +467,7 @@ udp_state_transition(struct ip_vs_conn *cp, int direction, cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL]; } -static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __udp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -475,6 +475,9 @@ static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->udp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)udp_timeouts, sizeof(udp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __udp_exit(struct net *net, struct ip_vs_proto_data *pd) -- cgit v1.1 From 8537de8a7ab6681cc72fb0411ab1ba7fdba62dd0 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 07:47:44 +0200 Subject: ipvs: kernel oops - do_ip_vs_get_ctl Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by: "Ryan O'Hara" Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Simon Horman --- include/net/ip_vs.h | 2 ++ net/netfilter/ipvs/ip_vs_core.c | 9 +++++++ net/netfilter/ipvs/ip_vs_ctl.c | 52 ++++++++++++++++++++++++----------------- 3 files changed, 41 insertions(+), 22 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 6d90dda..72522f0 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1203,6 +1203,8 @@ ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol, extern int ip_vs_use_count_inc(void); extern void ip_vs_use_count_dec(void); +extern int ip_vs_register_nl_ioctl(void); +extern void ip_vs_unregister_nl_ioctl(void); extern int ip_vs_control_init(void); extern void ip_vs_control_cleanup(void); extern struct ip_vs_dest * diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 260b9ef..00bdb1d 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1995,10 +1995,18 @@ static int __init ip_vs_init(void) goto cleanup_dev; } + ret = ip_vs_register_nl_ioctl(); + if (ret < 0) { + pr_err("can't register netlink/ioctl.\n"); + goto cleanup_hooks; + } + pr_info("ipvs loaded.\n"); return ret; +cleanup_hooks: + nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); cleanup_dev: unregister_pernet_device(&ipvs_core_dev_ops); cleanup_sub: @@ -2014,6 +2022,7 @@ exit: static void __exit ip_vs_cleanup(void) { + ip_vs_unregister_nl_ioctl(); nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); unregister_pernet_device(&ipvs_core_dev_ops); unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */ diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 376d2b1..f558998 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3750,21 +3750,10 @@ void __net_exit ip_vs_control_net_cleanup(struct net *net) free_percpu(ipvs->tot_stats.cpustats); } -int __init ip_vs_control_init(void) +int __init ip_vs_register_nl_ioctl(void) { - int idx; int ret; - EnterFunction(2); - - /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ - for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { - INIT_LIST_HEAD(&ip_vs_svc_table[idx]); - INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); - } - - smp_wmb(); /* Do we really need it now ? */ - ret = nf_register_sockopt(&ip_vs_sockopts); if (ret) { pr_err("cannot register sockopt.\n"); @@ -3776,28 +3765,47 @@ int __init ip_vs_control_init(void) pr_err("cannot register Generic Netlink interface.\n"); goto err_genl; } - - ret = register_netdevice_notifier(&ip_vs_dst_notifier); - if (ret < 0) - goto err_notf; - - LeaveFunction(2); return 0; -err_notf: - ip_vs_genl_unregister(); err_genl: nf_unregister_sockopt(&ip_vs_sockopts); err_sock: return ret; } +void ip_vs_unregister_nl_ioctl(void) +{ + ip_vs_genl_unregister(); + nf_unregister_sockopt(&ip_vs_sockopts); +} + +int __init ip_vs_control_init(void) +{ + int idx; + int ret; + + EnterFunction(2); + + /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ + for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { + INIT_LIST_HEAD(&ip_vs_svc_table[idx]); + INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); + } + + smp_wmb(); /* Do we really need it now ? */ + + ret = register_netdevice_notifier(&ip_vs_dst_notifier); + if (ret < 0) + return ret; + + LeaveFunction(2); + return 0; +} + void ip_vs_control_cleanup(void) { EnterFunction(2); unregister_netdevice_notifier(&ip_vs_dst_notifier); - ip_vs_genl_unregister(); - nf_unregister_sockopt(&ip_vs_sockopts); LeaveFunction(2); } -- cgit v1.1 From 6cf51852486af3d79f57bf46d00209a14244dbaa Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 27 Apr 2012 02:00:50 +0200 Subject: netfilter: xt_CT: fix wrong checking in the timeout assignment path The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_CT.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 59530e9..3746d8b 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -227,7 +227,7 @@ static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) } #ifdef CONFIG_NF_CONNTRACK_TIMEOUT - if (info->timeout) { + if (info->timeout[0]) { typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct nf_conn_timeout *timeout_ext; -- cgit v1.1 From 518fbf9cdf17875d808596afd77fc115a6f942ca Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 28 Apr 2012 23:21:56 +0000 Subject: net: fix sk_sockets_allocated_read_positive Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [] __lock_acquire+0x284/0xc26 [ 762.904542] [] lock_acquire+0x71/0x85 [ 762.904542] [] _raw_spin_lock+0x33/0x40 [ 762.904542] [] __percpu_counter_add+0x58/0x7c [ 762.904542] [] sk_clone_lock+0x1e5/0x200 [ 762.904542] [] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [] ip_local_deliver+0x41/0x45 [ 762.904542] [] ip_rcv_finish+0x31a/0x33c [ 762.904542] [] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [] ip_rcv+0x201/0x23e [ 762.904542] [] __netif_receive_skb+0x319/0x368 [ 762.904542] [] netif_receive_skb+0x4e/0x7d [ 762.904542] [] napi_skb_finish+0x1e/0x34 [ 762.904542] [] napi_gro_receive+0x20/0x24 [ 762.904542] [] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [] net_rx_action+0x90/0x160 [ 762.904542] [] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [] ? printk+0x18/0x1d [ 762.904542] [] valid_state+0x1f6/0x201 [ 762.904542] [] mark_lock+0xd1/0x1bb [ 762.904542] [] ? mark_lock+0x26/0x1bb [ 762.904542] [] ? check_usage_forwards+0x77/0x77 [ 762.904542] [] __lock_acquire+0x2f8/0xc26 [ 762.904542] [] ? mark_held_locks+0x5d/0x7b [ 762.904542] [] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [] lock_acquire+0x71/0x85 [ 762.904542] [] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [] _raw_spin_lock+0x33/0x40 [ 762.904542] [] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [] __percpu_counter_sum+0xd/0x58 [ 762.904542] [] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [] ? __alloc_skb+0x76/0x100 [ 762.904542] [] sk_wmem_schedule+0x21/0x2d [ 762.904542] [] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [] tcp_sendmsg+0x18f/0x68b [ 762.904542] [] ? ip_fast_csum+0x30/0x30 [ 762.904542] [] inet_sendmsg+0x53/0x5a [ 762.904542] [] sock_aio_write+0xd2/0xda [ 762.904542] [] ? mark_lock+0x26/0x1bb [ 762.904542] [] do_sync_write+0x9f/0xd9 [ 762.904542] [] ? file_free_rcu+0x2f/0x2f [ 762.904542] [] vfs_write+0x8f/0xab [ 762.904542] [] ? fget_light+0x75/0x7c [ 762.904542] [] sys_write+0x3d/0x5e [ 762.904542] [] syscall_call+0x7/0xb [ 762.904542] [] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd942ce33 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by: Denys Fedoryshchenko Sined-off-by: Eric Dumazet Cc: Glauber Costa Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- include/net/sock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 188532e..5a0a58a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1129,9 +1129,9 @@ sk_sockets_allocated_read_positive(struct sock *sk) struct proto *prot = sk->sk_prot; if (mem_cgroup_sockets_enabled && sk->sk_cgrp) - return percpu_counter_sum_positive(sk->sk_cgrp->sockets_allocated); + return percpu_counter_read_positive(sk->sk_cgrp->sockets_allocated); - return percpu_counter_sum_positive(prot->sockets_allocated); + return percpu_counter_read_positive(prot->sockets_allocated); } static inline int -- cgit v1.1 From 05be18241e83d2ac6b656c8f924e74b3998c173f Mon Sep 17 00:00:00 2001 From: Jan Seiffert Date: Sun, 29 Apr 2012 19:02:19 +0000 Subject: bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt Signed-off-by: Jan Seiffert Signed-off-by: David S. Miller --- arch/powerpc/net/bpf_jit.h | 8 ++- arch/powerpc/net/bpf_jit_64.S | 108 +++++++++++++++++++++++++++++++++++----- arch/powerpc/net/bpf_jit_comp.c | 26 ++++------ 3 files changed, 111 insertions(+), 31 deletions(-) diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index af1ab5e..5c3cf2d 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -48,7 +48,13 @@ /* * Assembly helpers from arch/powerpc/net/bpf_jit.S: */ -extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[]; +#define DECLARE_LOAD_FUNC(func) \ + extern u8 func[], func##_negative_offset[], func##_positive_offset[] + +DECLARE_LOAD_FUNC(sk_load_word); +DECLARE_LOAD_FUNC(sk_load_half); +DECLARE_LOAD_FUNC(sk_load_byte); +DECLARE_LOAD_FUNC(sk_load_byte_msh); #define FUNCTION_DESCR_SIZE 24 diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index ff4506e..55ba385 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -31,14 +31,13 @@ * then branch directly to slow_path_XXX if required. (In fact, could * load a spare GPR with the address of slow_path_generic and pass size * as an argument, making the call site a mtlr, li and bllr.) - * - * Technically, the "is addr < 0" check is unnecessary & slowing down - * the ABS path, as it's statically checked on generation. */ .globl sk_load_word sk_load_word: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_word_neg + .globl sk_load_word_positive_offset +sk_load_word_positive_offset: /* Are we accessing past headlen? */ subi r_scratch1, r_HL, 4 cmpd r_scratch1, r_addr @@ -51,7 +50,9 @@ sk_load_word: .globl sk_load_half sk_load_half: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_half_neg + .globl sk_load_half_positive_offset +sk_load_half_positive_offset: subi r_scratch1, r_HL, 2 cmpd r_scratch1, r_addr blt bpf_slow_path_half @@ -61,7 +62,9 @@ sk_load_half: .globl sk_load_byte sk_load_byte: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_byte_neg + .globl sk_load_byte_positive_offset +sk_load_byte_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte lbzx r_A, r_D, r_addr @@ -69,22 +72,20 @@ sk_load_byte: /* * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf) - * r_addr is the offset value, already known positive + * r_addr is the offset value */ .globl sk_load_byte_msh sk_load_byte_msh: + cmpdi r_addr, 0 + blt bpf_slow_path_byte_msh_neg + .globl sk_load_byte_msh_positive_offset +sk_load_byte_msh_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte_msh lbzx r_X, r_D, r_addr rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr -bpf_error: - /* Entered with cr0 = lt */ - li r3, 0 - /* Generated code will 'blt epilogue', returning 0. */ - blr - /* Call out to skb_copy_bits: * We'll need to back up our volatile regs first; we have * local variable space at r1+(BPF_PPC_STACK_BASIC). @@ -136,3 +137,84 @@ bpf_slow_path_byte_msh: lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1) rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr + +/* Call out to bpf_internal_load_pointer_neg_helper: + * We'll need to back up our volatile regs first; we have + * local variable space at r1+(BPF_PPC_STACK_BASIC). + * Allocate a new stack frame here to remain ABI-compliant in + * stashing LR. + */ +#define sk_negative_common(SIZE) \ + mflr r0; \ + std r0, 16(r1); \ + /* R3 goes in parameter space of caller's frame */ \ + std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \ + /* R3 = r_skb, as passed */ \ + mr r4, r_addr; \ + li r5, SIZE; \ + bl bpf_internal_load_pointer_neg_helper; \ + /* R3 != 0 on success */ \ + addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ + ld r0, 16(r1); \ + ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + mtlr r0; \ + cmpldi r3, 0; \ + beq bpf_error_slow; /* cr0 = EQ */ \ + mr r_addr, r3; \ + ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + /* Great success! */ + +bpf_slow_path_word_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_word_negative_offset +sk_load_word_negative_offset: + sk_negative_common(4) + lwz r_A, 0(r_addr) + blr + +bpf_slow_path_half_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_half_negative_offset +sk_load_half_negative_offset: + sk_negative_common(2) + lhz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_negative_offset +sk_load_byte_negative_offset: + sk_negative_common(1) + lbz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_msh_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_msh_negative_offset +sk_load_byte_msh_negative_offset: + sk_negative_common(1) + lbz r_X, 0(r_addr) + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr + +bpf_error_slow: + /* fabricate a cr0 = lt */ + li r_scratch1, -1 + cmpdi r_scratch1, 0 +bpf_error: + /* Entered with cr0 = lt */ + li r3, 0 + /* Generated code will 'blt epilogue', returning 0. */ + blr diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 73619d3..2dc8b14 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) PPC_BLR(); } +#define CHOOSE_LOAD_FUNC(K, func) \ + ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset) + /* Assemble the body code between the prologue & epilogue. */ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, struct codegen_context *ctx, @@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, /*** Absolute loads from packet header/data ***/ case BPF_S_LD_W_ABS: - func = sk_load_word; + func = CHOOSE_LOAD_FUNC(K, sk_load_word); goto common_load; case BPF_S_LD_H_ABS: - func = sk_load_half; + func = CHOOSE_LOAD_FUNC(K, sk_load_half); goto common_load; case BPF_S_LD_B_ABS: - func = sk_load_byte; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte); common_load: - /* - * Load from [K]. Reference with the (negative) - * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported. - */ + /* Load from [K]. */ ctx->seen |= SEEN_DATAREF; - if ((int)K < 0) - return -ENOTSUPP; PPC_LI64(r_scratch1, func); PPC_MTLR(r_scratch1); PPC_LI32(r_addr, K); @@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, common_load_ind: /* * Load from [X + K]. Negative offsets are tested for - * in the helper functions, and result in a 'ret 0'. + * in the helper functions. */ ctx->seen |= SEEN_DATAREF | SEEN_XREG; PPC_LI64(r_scratch1, func); @@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, break; case BPF_S_LDX_B_MSH: - /* - * x86 version drops packet (RET 0) when K<0, whereas - * interpreter does allow K<0 (__load_pointer, special - * ancillary data). common_load returns ENOTSUPP if K<0, - * so we fall back to interpreter & filter works. - */ - func = sk_load_byte_msh; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh); goto common_load; break; -- cgit v1.1 From 1cebce36d660c83bd1353e41f3e66abd4686f215 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 30 Apr 2012 06:00:18 +0000 Subject: tcp: fix infinite cwnd in tcp_complete_cwr() When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2a702e3..d99efd7 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2868,11 +2868,14 @@ static inline void tcp_complete_cwr(struct sock *sk) /* Do not moderate cwnd if it's already undone in cwr or recovery. */ if (tp->undo_marker) { - if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) + if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) { tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh); - else /* PRR */ + tp->snd_cwnd_stamp = tcp_time_stamp; + } else if (tp->snd_ssthresh < TCP_INFINITE_SSTHRESH) { + /* PRR algorithm. */ tp->snd_cwnd = tp->snd_ssthresh; - tp->snd_cwnd_stamp = tcp_time_stamp; + tp->snd_cwnd_stamp = tcp_time_stamp; + } } tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR); } -- cgit v1.1 From 66f2c99af3d6f2d0aa1120884cf1c60613ef61c0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Apr 2012 15:44:16 +0200 Subject: mac80211: fix AP mode EAP tx for VLAN stations EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/mac80211/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 782a601..e76facc 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1158,7 +1158,8 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, tx->sta = rcu_dereference(sdata->u.vlan.sta); if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) return TX_DROP; - } else if (info->flags & IEEE80211_TX_CTL_INJECTED) { + } else if (info->flags & IEEE80211_TX_CTL_INJECTED || + tx->sdata->control_port_protocol == tx->skb->protocol) { tx->sta = sta_info_get_bss(sdata, hdr->addr1); } if (!tx->sta) -- cgit v1.1 From 7bdd305e024d78cfb4f32a1badeb5562791ee5b8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:50 +0000 Subject: smsc75xx: mark link down on startup and let PHY interrupt deal with carrier changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index a234948..b1b4649 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1212,7 +1212,7 @@ static const struct driver_info smsc75xx_info = { .rx_fixup = smsc75xx_rx_fixup, .tx_fixup = smsc75xx_tx_fixup, .status = smsc75xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { -- cgit v1.1 From cb8722d30c20386e4d4b4bc3a2ceceacd35f818a Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:51 +0000 Subject: smsc75xx: fix mdio reads and writes smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index b1b4649..f97207a 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_READ; + | MII_ACCESS_READ | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_WRITE; + | MII_ACCESS_WRITE | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); -- cgit v1.1 From 4f49add9ad297dab392c14dc60d490364080739b Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:52 +0000 Subject: smsc75xx: add more information to register io failure warnings Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f97207a..1de7785 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to read register index 0x%08x", index); + "Failed to read reg index 0x%08x: %d", index, ret); le32_to_cpus(buf); *data = *buf; @@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to write register index 0x%08x", index); + "Failed to write reg index 0x%08x: %d", index, ret); kfree(buf); -- cgit v1.1 From 8a1d59d79fffdad4bb1b3b5d069da4c6c52db2e6 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:53 +0000 Subject: smsc75xx: fix phy init reset loop fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1de7785..cc23a58 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -661,7 +661,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); check_warn_return(bmcr, "Error reading MII_BMCR"); timeout++; - } while ((bmcr & MII_BMCR) && (timeout < 100)); + } while ((bmcr & BMCR_RESET) && (timeout < 100)); if (timeout >= 100) { netdev_warn(dev->net, "timeout on PHY Reset"); -- cgit v1.1 From b140504aa3903feaba6f6bc77a4478a944fc12d2 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:54 +0000 Subject: smsc75xx: fix phy interrupt acknowledge smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index cc23a58..4941782 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev) u16 lcladv, rmtadv; int ret; - /* clear interrupt status */ + /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff); ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); check_warn_return(ret, "Error writing INT_STS"); @@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev) static int smsc75xx_phy_initialize(struct usbnet *dev) { - int bmcr, timeout = 0; + int bmcr, ret, timeout = 0; /* Initialize MII structure */ dev->mii.dev = dev->net; @@ -672,9 +673,10 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - /* read to clear */ - smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); - check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + /* read and write to clear phy interrupt status */ + ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT); -- cgit v1.1 From c0b92e4d44ecaab3cd3f09f9f905306a5989b0d4 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:55 +0000 Subject: smsc75xx: declare smsc75xx's MII as GMII capable also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 4941782..ae23d85 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -652,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) dev->mii.mdio_write = smsc75xx_mdio_write; dev->mii.phy_id_mask = 0x1f; dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; /* reset phy and wait for reset to complete */ @@ -672,6 +673,8 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); -- cgit v1.1 From 2f3a081ea2f63cd5b3e549a0040c760d87483f99 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:56 +0000 Subject: smsc75xx: enable mac to detect speed/duplex from phy This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index ae23d85..00103a8 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -951,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev) ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + /* allow mac to detect speed and duplex from phy */ + ret = smsc75xx_read_reg(dev, MAC_CR, &buf); + check_warn_return(ret, "Failed to read MAC_CR: %d", ret); + + buf |= (MAC_CR_ADD | MAC_CR_ASD); + ret = smsc75xx_write_reg(dev, MAC_CR, buf); + check_warn_return(ret, "Failed to write MAC_CR: %d", ret); + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); check_warn_return(ret, "Failed to read MAC_TX: %d", ret); -- cgit v1.1 From 9bd1be457d2b9568c3c8f8f6b8e450a501bff402 Mon Sep 17 00:00:00 2001 From: Samuel Liao Date: Fri, 27 Apr 2012 17:09:27 +0000 Subject: igbvf: fix the bug when initializing the igbvf Maybe it's a typo, but it cause that igbvf can't be initialized successfully. Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr. Signed-off-by: Samuel Liao Signed-off-by: Shan Wei Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index d61ca2a..8ec74b0 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, netdev->addr_len); } - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", netdev->dev_addr); err = -EIO; goto err_hw_init; } - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); -- cgit v1.1 From 2b1588c3fafc3fd2b3bc49202a380eaecbbc2193 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 17 Mar 2012 02:39:16 +0000 Subject: ixgbe: Fix a memory leak in IEEE DCB The driver was freeing memory in shutdown instead of remove. As a result we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the driver. This change moves the freeing of the memory into the remove routine where it belongs. Signed-off-by: Alexander Duyck Acked-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index a7f3cd8..88f6b2e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4873,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) } ixgbe_clear_interrupt_scheme(adapter); -#ifdef CONFIG_DCB - kfree(adapter->ixgbe_ieee_pfc); - kfree(adapter->ixgbe_ieee_ets); -#endif #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -7224,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) ixgbe_release_hw_control(adapter); +#ifdef CONFIG_DCB + kfree(adapter->ixgbe_ieee_pfc); + kfree(adapter->ixgbe_ieee_ets); + +#endif iounmap(adapter->hw.hw_addr); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); -- cgit v1.1 From 441e1719f21356ef84d2debc6ca3e6d07e6c8889 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 20 Apr 2012 05:48:08 +0000 Subject: ixgbe: fix calling skb_put on nonlinear skb assertion bug With the support to bounce buffer added, the skb is coming as nonlinear in the case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack would take care of that. However, for target mode, we have to set the FC CRC and FC EOF field to allow the protocol stack to not drop the frame for the last data frame of that sequence. So fix this by linearizing the skb first before doing skb_put(). Signed-off-by: Yi Zou Tested-by: Marcus Dennis Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 77ea4b7..bc07933 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, */ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) && (fctl & FC_FC_END_SEQ)) { + skb_linearize(skb); crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); crc->fcoe_eof = FC_EOF_T; } -- cgit v1.1 From 60158e64641fd8c780a6d14de2bf42aabc419916 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 30 Apr 2012 07:15:47 +0000 Subject: cxgb3: Don't call cxgb_vlan_mode until q locks are initialized The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28 Call Trace: [] register_lock_class+0x108/0x2d0 [] __lock_acquire+0xd3/0xd06 [] lock_acquire+0xbf/0xfe [] _raw_spin_lock_irq+0x36/0x45 [] cxgb_vlan_mode+0x96/0xcb [cxgb3] [] init_one+0x8c4/0x980 [cxgb3] [] local_pci_probe+0x3f/0x70 [] do_work_for_cpu+0x10/0x22 [] kthread+0xa1/0xa9 [] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 92 ++++++++++++------------- 1 file changed, 46 insertions(+), 46 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 63bfdd1..abb6ce7 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -1150,6 +1150,48 @@ release_tpsram: } /** + * t3_synchronize_rx - wait for current Rx processing on a port to complete + * @adap: the adapter + * @p: the port + * + * Ensures that current Rx processing on any of the queues associated with + * the given port completes before returning. We do this by acquiring and + * releasing the locks of the response queues associated with the port. + */ +static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) +{ + int i; + + for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { + struct sge_rspq *q = &adap->sge.qs[i].rspq; + + spin_lock_irq(&q->lock); + spin_unlock_irq(&q->lock); + } +} + +static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->params.rev > 0) { + t3_set_vlan_accel(adapter, 1 << pi->port_id, + features & NETIF_F_HW_VLAN_RX); + } else { + /* single control for all ports */ + unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; + + for_each_port(adapter, i) + have_vlans |= + adapter->port[i]->features & NETIF_F_HW_VLAN_RX; + + t3_set_vlan_accel(adapter, 1, have_vlans); + } + t3_synchronize_rx(adapter, pi); +} + +/** * cxgb_up - enable the adapter * @adapter: adapter being enabled * @@ -1161,7 +1203,7 @@ release_tpsram: */ static int cxgb_up(struct adapter *adap) { - int err; + int i, err; if (!(adap->flags & FULL_INIT_DONE)) { err = t3_check_fw_version(adap); @@ -1198,6 +1240,9 @@ static int cxgb_up(struct adapter *adap) if (err) goto out; + for_each_port(adap, i) + cxgb_vlan_mode(adap->port[i], adap->port[i]->features); + setup_rss(adap); if (!(adap->flags & NAPI_INIT)) init_napi(adap); @@ -2508,48 +2553,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p) return 0; } -/** - * t3_synchronize_rx - wait for current Rx processing on a port to complete - * @adap: the adapter - * @p: the port - * - * Ensures that current Rx processing on any of the queues associated with - * the given port completes before returning. We do this by acquiring and - * releasing the locks of the response queues associated with the port. - */ -static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) -{ - int i; - - for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { - struct sge_rspq *q = &adap->sge.qs[i].rspq; - - spin_lock_irq(&q->lock); - spin_unlock_irq(&q->lock); - } -} - -static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) -{ - struct port_info *pi = netdev_priv(dev); - struct adapter *adapter = pi->adapter; - - if (adapter->params.rev > 0) { - t3_set_vlan_accel(adapter, 1 << pi->port_id, - features & NETIF_F_HW_VLAN_RX); - } else { - /* single control for all ports */ - unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; - - for_each_port(adapter, i) - have_vlans |= - adapter->port[i]->features & NETIF_F_HW_VLAN_RX; - - t3_set_vlan_accel(adapter, 1, have_vlans); - } - t3_synchronize_rx(adapter, pi); -} - static netdev_features_t cxgb_fix_features(struct net_device *dev, netdev_features_t features) { @@ -3353,9 +3356,6 @@ static int __devinit init_one(struct pci_dev *pdev, err = sysfs_create_group(&adapter->port[0]->dev.kobj, &cxgb3_attr_group); - for_each_port(adapter, i) - cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features); - print_port_info(adapter, ai); return 0; -- cgit v1.1 From d961949660fa1c1b7eb0c3a3c157989c90f14e8e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 30 Apr 2012 21:29:16 +0000 Subject: net: fix two typos in skbuff.h fix kernel doc typos in function names Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 775292a..111f26b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1020,7 +1020,7 @@ static inline void skb_queue_splice(const struct sk_buff_head *list, } /** - * skb_queue_splice - join two skb lists and reinitialise the emptied list + * skb_queue_splice_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * @@ -1051,7 +1051,7 @@ static inline void skb_queue_splice_tail(const struct sk_buff_head *list, } /** - * skb_queue_splice_tail - join two skb lists and reinitialise the emptied list + * skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * -- cgit v1.1 From 3f42941b5d1d13542b1a755a9e4f633aa72e4d3e Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 05:49:45 +0000 Subject: sky2: propogate rx hash when packet is copied When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index c9b504e..0ced311 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2494,8 +2494,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb_copy_from_linear_data(re->skb, skb->data, length); skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; + skb->rxhash = re->skb->rxhash; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); } -- cgit v1.1 From e072b3fad5f3915102c94628b4971f52ff99dd05 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 06:47:37 +0000 Subject: sky2: fix receive length error in mixed non-VLAN/VLAN traffic Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 28 +++++++++++++++++----------- drivers/net/ethernet/marvell/sky2.h | 1 - 2 files changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 0ced311..487a6c8 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2495,9 +2495,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; skb->rxhash = re->skb->rxhash; + skb->vlan_tci = re->skb->vlan_tci; pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->vlan_tci = 0; re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); @@ -2583,9 +2585,6 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) - count -= VLAN_HLEN; /* Account for vlan tag */ - netif_printk(sky2, rx_status, KERN_DEBUG, dev, "rx slot %u status 0x%x len %d\n", sky2->rx_next, status, length); @@ -2593,6 +2592,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (vlan_tx_tag_present(re->skb)) + count -= VLAN_HLEN; /* Account for vlan tag */ + /* This chip has hardware problems that generates bogus status. * So do only marginal checking and expect higher level protocols * to handle crap frames. @@ -2650,11 +2652,8 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) - __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); - if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); else @@ -2708,6 +2707,14 @@ static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) } } +static void sky2_rx_tag(struct sky2_port *sky2, u16 length) +{ + struct sk_buff *skb; + + skb = sky2->rx_ring[sky2->rx_next].skb; + __vlan_hwaccel_put_tag(skb, be16_to_cpu(length)); +} + static void sky2_rx_hash(struct sky2_port *sky2, u32 status) { struct sk_buff *skb; @@ -2766,8 +2773,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - - sky2_skb_rx(sky2, status, skb); + sky2_skb_rx(sky2, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2775,11 +2781,11 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) break; case OP_RXVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); break; case OP_RXCHKSVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); /* fall through */ case OP_RXCHKS: if (likely(dev->features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index ff6f58b..3c896ce 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2241,7 +2241,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - u16 rx_tag; struct { unsigned long last; -- cgit v1.1 From 116a0fc31c6c9b8fc821be5a96e5bf0b43260131 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 29 Apr 2012 09:08:22 +0000 Subject: netem: fix possible skb leak skb_checksum_help(skb) can return an error, we must free skb in this case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if skb_unshare() failed), so lets use this generic helper. Signed-off-by: Eric Dumazet Cc: Stephen Hemminger Signed-off-by: David S. Miller --- net/sched/sch_netem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 5da548f..ebd2296 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -408,10 +408,8 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) { if (!(skb = skb_unshare(skb, GFP_ATOMIC)) || (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_help(skb))) { - sch->qstats.drops++; - return NET_XMIT_DROP; - } + skb_checksum_help(skb))) + return qdisc_drop(skb, sch); skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8); } -- cgit v1.1 From 5bbdc057c270cc0d672ead03320ed8d7a11bac03 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:54 +0000 Subject: net: ucc_geth, increase no. of HW RX descriptors In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h index 2e395a2..f71b3e7 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.h +++ b/drivers/net/ethernet/freescale/ucc_geth.h @@ -877,7 +877,7 @@ struct ucc_geth_hardware_statistics { /* Driver definitions */ #define TX_BD_RING_LEN 0x10 -#define RX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x20 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) -- cgit v1.1 From 70f8002d7813ffc5dd9ff3e9d01a17794fb4a4df Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:55 +0000 Subject: ucc_geth: Add 16 bytes to max TX frame for VLANs Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 17a46e7..9ac14f8 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -116,10 +116,10 @@ static struct ucc_geth_info ugeth_primary_info = { .maxGroupAddrInHash = 4, .maxIndAddrInHash = 4, .prel = 7, - .maxFrameLength = 1518, + .maxFrameLength = 1518+16, /* Add extra bytes for VLANs etc. */ .minFrameLength = 64, - .maxD1Length = 1520, - .maxD2Length = 1520, + .maxD1Length = 1520+16, /* Add extra bytes for VLANs etc. */ + .maxD2Length = 1520+16, /* Add extra bytes for VLANs etc. */ .vlantype = 0x8100, .ecamptr = ((uint32_t) NULL), .eventRegMask = UCCE_OTHER, -- cgit v1.1 From 720f3d7cb19eb27f85f72836c8f8004ccb257f39 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:02 +0000 Subject: usbnet: fix leak of transfer buffer of dev->interrupt The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index b7b3f5b..ca6fd80 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -210,6 +210,7 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf) } else { usb_fill_int_urb(dev->interrupt, dev->udev, pipe, buf, maxp, intr_complete, dev, period); + dev->interrupt->transfer_flags |= URB_FREE_BUFFER; dev_dbg(&intf->dev, "status ep%din, %d bytes period %d\n", usb_pipeendpoint(pipe), maxp, period); -- cgit v1.1 From a4723848d05dd31d298c551fb77ad28481309999 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:03 +0000 Subject: usbnet: fix failure handling in usbnet_probe If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by: Ming Lei Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index ca6fd80..2d927fb 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1444,7 +1444,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) status = register_netdev (net); if (status) - goto out3; + goto out4; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1462,6 +1462,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out4: + usb_free_urb(dev->interrupt); out3: if (info->unbind) info->unbind (dev, udev); -- cgit v1.1 From 4fdcfa12843bca38d0c9deff70c8720e4e8f515f Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 1 May 2012 08:18:02 +0000 Subject: drop_monitor: prevent init path from scheduling on the wrong cpu I just noticed after some recent updates, that the init path for the drop monitor protocol has a minor error. drop monitor maintains a per cpu structure, that gets initalized from a single cpu. Normally this is fine, as the protocol isn't in use yet, but I recently made a change that causes a failed skb allocation to reschedule itself . Given the current code, the implication is that this workqueue reschedule will take place on the wrong cpu. If drop monitor is used early during the boot process, its possible that two cpus will access a single per-cpu structure in parallel, possibly leading to data corruption. This patch fixes the situation, by storing the cpu number that a given instance of this per-cpu data should be accessed from. In the case of a need for a reschedule, the cpu stored in the struct is assigned the rescheule, rather than the currently executing cpu Tested successfully by myself. Signed-off-by: Neil Horman CC: David Miller Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 7592943..a7cad74 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -49,6 +49,7 @@ struct per_cpu_dm_data { struct sk_buff __rcu *skb; atomic_t dm_hit_count; struct timer_list send_timer; + int cpu; }; struct dm_hw_stat_delta { @@ -73,7 +74,6 @@ static int dm_hit_limit = 64; static int dm_delay = 1; static unsigned long dm_hw_check_delta = 2*HZ; static LIST_HEAD(hw_stats_list); -static int initialized = 0; static void reset_per_cpu_data(struct per_cpu_dm_data *data) { @@ -96,8 +96,8 @@ static void reset_per_cpu_data(struct per_cpu_dm_data *data) sizeof(struct net_dm_alert_msg)); msg = nla_data(nla); memset(msg, 0, al); - } else if (initialized) - schedule_work_on(smp_processor_id(), &data->dm_alert_work); + } else + schedule_work_on(data->cpu, &data->dm_alert_work); /* * Don't need to lock this, since we are guaranteed to only @@ -121,6 +121,8 @@ static void send_dm_alert(struct work_struct *unused) struct sk_buff *skb; struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + WARN_ON_ONCE(data->cpu != smp_processor_id()); + /* * Grab the skb we're about to send */ @@ -404,14 +406,14 @@ static int __init init_net_drop_monitor(void) for_each_present_cpu(cpu) { data = &per_cpu(dm_cpu_data, cpu); - reset_per_cpu_data(data); + data->cpu = cpu; INIT_WORK(&data->dm_alert_work, send_dm_alert); init_timer(&data->send_timer); data->send_timer.data = cpu; data->send_timer.function = sched_send_work; + reset_per_cpu_data(data); } - initialized = 1; goto out; -- cgit v1.1 From 84768edbb2721637620b2d84501bb0d5aed603f1 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 2 May 2012 03:58:43 +0000 Subject: net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg l2tp_ip_sendmsg could return without releasing socket lock, making it all the way to userspace, and generating the following warning: [ 130.891594] ================================================ [ 130.894569] [ BUG: lock held when returning to user space! ] [ 130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G W [ 130.900336] ------------------------------------------------ [ 130.902996] trinity/8384 is leaving the kernel with locks still held! [ 130.906106] 1 lock held by trinity/8384: [ 130.907924] #0: (sk_lock-AF_INET){+.+.+.}, at: [] l2tp_ip_sendmsg+0x2f/0x550 Introduced by commit 2f16270 ("l2tp: Fix locking in l2tp_ip.c"). Signed-off-by: Sasha Levin Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 585d93e..6274f0b 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -442,8 +442,9 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m daddr = lip->l2tp_addr.s_addr; } else { + rc = -EDESTADDRREQ; if (sk->sk_state != TCP_ESTABLISHED) - return -EDESTADDRREQ; + goto out; daddr = inet->inet_daddr; connected = 1; -- cgit v1.1 From b49960a05e32121d29316cfdf653894b88ac9190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 May 2012 02:28:41 +0000 Subject: tcp: change tcp_adv_win_scale and tcp_rmem[2] tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Tom Herbert Cc: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 4 ++-- net/ipv4/tcp.c | 9 +++++---- net/ipv4/tcp_input.c | 2 +- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index bd80ba5..1619a8c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. Possible values are [-31, 31], inclusive. - Default: 2 + Default: 1 tcp_allowed_congestion_control - STRING Show/set the congestion control choices available to non-privileged @@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables automatic tuning of that socket's receive buffer size, in which case this value is ignored. - Default: between 87380B and 4MB, depending on RAM size. + Default: between 87380B and 6MB, depending on RAM size. tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8bb6ade..1272a88 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3243,7 +3243,7 @@ void __init tcp_init(void) { struct sk_buff *skb = NULL; unsigned long limit; - int max_share, cnt; + int max_rshare, max_wshare, cnt; unsigned int i; unsigned long jiffy = jiffies; @@ -3303,15 +3303,16 @@ void __init tcp_init(void) tcp_init_mem(&init_net); /* Set per-socket limits to no more than 1/128 the pressure threshold */ limit = nr_free_buffer_pages() << (PAGE_SHIFT - 7); - max_share = min(4UL*1024*1024, limit); + max_wshare = min(4UL*1024*1024, limit); + max_rshare = min(6UL*1024*1024, limit); sysctl_tcp_wmem[0] = SK_MEM_QUANTUM; sysctl_tcp_wmem[1] = 16*1024; - sysctl_tcp_wmem[2] = max(64*1024, max_share); + sysctl_tcp_wmem[2] = max(64*1024, max_wshare); sysctl_tcp_rmem[0] = SK_MEM_QUANTUM; sysctl_tcp_rmem[1] = 87380; - sysctl_tcp_rmem[2] = max(87380, max_share); + sysctl_tcp_rmem[2] = max(87380, max_rshare); pr_info("Hash tables configured (established %u bind %u)\n", tcp_hashinfo.ehash_mask + 1, tcp_hashinfo.bhash_size); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d99efd7..257b617 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -85,7 +85,7 @@ int sysctl_tcp_ecn __read_mostly = 2; EXPORT_SYMBOL(sysctl_tcp_ecn); int sysctl_tcp_dsack __read_mostly = 1; int sysctl_tcp_app_win __read_mostly = 31; -int sysctl_tcp_adv_win_scale __read_mostly = 2; +int sysctl_tcp_adv_win_scale __read_mostly = 1; EXPORT_SYMBOL(sysctl_tcp_adv_win_scale); int sysctl_tcp_stdurg __read_mostly; -- cgit v1.1 From 5a8887d39e1ba5ee2d4ccb94b14d6f2dce5ddfca Mon Sep 17 00:00:00 2001 From: Gerard Lledo Date: Sat, 28 Apr 2012 08:52:37 +0000 Subject: sungem: Fix WakeOnLan WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sungem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index 558409f..4ba9690 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2339,7 +2339,7 @@ static int gem_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); /* Switch off chip, remember WOL setting */ - gp->asleep_wol = gp->wake_on_lan; + gp->asleep_wol = !!gp->wake_on_lan; gem_do_stop(dev, gp->asleep_wol); /* Unlock the network stack */ -- cgit v1.1