From bd3486ded7a0c313a6575343e6c2b21d14476645 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 5 Dec 2017 08:45:30 -0600 Subject: usb: musb: da8xx: fix babble condition handling When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt. In this case, we should handle the babble interrupt first and recover from the babble condition. This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/da8xx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0397606..6c036de 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); - } else { + } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) { + /* + * When babble condition happens, drvvbus interrupt + * is also generated. Ignore this drvvbus interrupt + * and let babble interrupt handler recovers the + * controller; otherwise, the host-mode flag is lost + * due to the MUSB_DEV_MODE() call below and babble + * recovery logic will not be called. + */ musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0; -- cgit v1.1 From 62354454625741f0569c2cbe45b2d192f8fd258e Mon Sep 17 00:00:00 2001 From: David Kozub Date: Tue, 5 Dec 2017 22:40:04 +0100 Subject: USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by: David Kozub Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ drivers/usb/storage/unusual_uas.h | 7 +++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2968046..f72d045 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2100,6 +2100,13 @@ UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA ), +/* Reported by David Kozub */ +UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, + "JMicron", + "JMS567", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA), + /* * Reported by Alexandre Oliva * JMicron responds to USN and several other SCSI ioctls with a diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index d520374..e6127fb 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -129,6 +129,13 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES), +/* Reported-by: David Kozub */ +UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, + "JMicron", + "JMS567", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA), + /* Reported-by: Hans de Goede */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", -- cgit v1.1 From 82a2b827c96883d8b39a58bba23d222d6b0de7ff Mon Sep 17 00:00:00 2001 From: Julien BOIBESSOT Date: Tue, 5 Dec 2017 16:09:04 +0100 Subject: tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror) Fixes following build error: vhci_driver.c: In function 'refresh_imported_device_list': vhci_driver.c:118:37: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~ vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into a destination of size 17 snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Julien BOIBESSOT Acked-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- tools/usb/usbip/libsrc/vhci_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index 8a1cd16..627d1df 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -106,7 +106,7 @@ static int parse_status(const char *value) return 0; } -#define MAX_STATUS_NAME 16 +#define MAX_STATUS_NAME 18 static int refresh_imported_device_list(void) { -- cgit v1.1 From 635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:47 -0700 Subject: usbip: fix stub_rx: get_pipe() to validate endpoint number get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 536e037..4d61063 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -328,15 +328,15 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; + if (epnum < 0 || epnum > 15) + goto err_ret; + if (dir == USBIP_DIR_IN) ep = udev->ep_in[epnum & 0x7f]; else ep = udev->ep_out[epnum & 0x7f]; - if (!ep) { - dev_err(&sdev->udev->dev, "no such endpoint?, %d\n", - epnum); - BUG(); - } + if (!ep) + goto err_ret; epd = &ep->desc; if (usb_endpoint_xfer_control(epd)) { @@ -367,9 +367,10 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) return usb_rcvisocpipe(udev, epnum); } +err_ret: /* NOT REACHED */ - dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum); - return 0; + dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum); + return -1; } static void masking_bogus_flags(struct urb *urb) @@ -435,6 +436,9 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, struct usb_device *udev = sdev->udev; int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); + if (pipe == -1) + return; + priv = stub_priv_alloc(sdev, pdu); if (!priv) return; -- cgit v1.1 From c6688ef9f29762e65bce325ef4acd6c675806366 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:48 -0700 Subject: usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 4d61063..493ac29 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -322,11 +322,13 @@ static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, return priv; } -static int get_pipe(struct stub_device *sdev, int epnum, int dir) +static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu) { struct usb_device *udev = sdev->udev; struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; + int epnum = pdu->base.ep; + int dir = pdu->base.direction; if (epnum < 0 || epnum > 15) goto err_ret; @@ -339,6 +341,15 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) goto err_ret; epd = &ep->desc; + + /* validate transfer_buffer_length */ + if (pdu->u.cmd_submit.transfer_buffer_length > INT_MAX) { + dev_err(&sdev->udev->dev, + "CMD_SUBMIT: -EMSGSIZE transfer_buffer_length %d\n", + pdu->u.cmd_submit.transfer_buffer_length); + return -1; + } + if (usb_endpoint_xfer_control(epd)) { if (dir == USBIP_DIR_OUT) return usb_sndctrlpipe(udev, epnum); @@ -361,6 +372,21 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) } if (usb_endpoint_xfer_isoc(epd)) { + /* validate packet size and number of packets */ + unsigned int maxp, packets, bytes; + + maxp = usb_endpoint_maxp(epd); + maxp *= usb_endpoint_maxp_mult(epd); + bytes = pdu->u.cmd_submit.transfer_buffer_length; + packets = DIV_ROUND_UP(bytes, maxp); + + if (pdu->u.cmd_submit.number_of_packets < 0 || + pdu->u.cmd_submit.number_of_packets > packets) { + dev_err(&sdev->udev->dev, + "CMD_SUBMIT: isoc invalid num packets %d\n", + pdu->u.cmd_submit.number_of_packets); + return -1; + } if (dir == USBIP_DIR_OUT) return usb_sndisocpipe(udev, epnum); else @@ -369,7 +395,7 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) err_ret: /* NOT REACHED */ - dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum); + dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum); return -1; } @@ -434,7 +460,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, struct stub_priv *priv; struct usbip_device *ud = &sdev->ud; struct usb_device *udev = sdev->udev; - int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); + int pipe = get_pipe(sdev, pdu); if (pipe == -1) return; @@ -456,7 +482,8 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, } /* allocate urb transfer buffer, if needed */ - if (pdu->u.cmd_submit.transfer_buffer_length > 0) { + if (pdu->u.cmd_submit.transfer_buffer_length > 0 && + pdu->u.cmd_submit.transfer_buffer_length <= INT_MAX) { priv->urb->transfer_buffer = kzalloc(pdu->u.cmd_submit.transfer_buffer_length, GFP_KERNEL); -- cgit v1.1 From 2f2d0088eb93db5c649d2a5e34a3800a8a935fc5 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:49 -0700 Subject: usbip: prevent vhci_hcd driver from leaking a socket pointer address When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_common.h | 1 + drivers/usb/usbip/vhci_sysfs.c | 25 ++++++++++++++++--------- tools/usb/usbip/libsrc/vhci_driver.c | 8 ++++---- 3 files changed, 21 insertions(+), 13 deletions(-) diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h index e5de35c..473fb8a 100644 --- a/drivers/usb/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -256,6 +256,7 @@ struct usbip_device { /* lock for status */ spinlock_t lock; + int sockfd; struct socket *tcp_socket; struct task_struct *tcp_rx; diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index e78f747..091f76b 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -17,15 +17,20 @@ /* * output example: - * hub port sta spd dev socket local_busid - * hs 0000 004 000 00000000 c5a7bb80 1-2.3 + * hub port sta spd dev sockfd local_busid + * hs 0000 004 000 00000000 3 1-2.3 * ................................................ - * ss 0008 004 000 00000000 d8cee980 2-3.4 + * ss 0008 004 000 00000000 4 2-3.4 * ................................................ * - * IP address can be retrieved from a socket pointer address by looking - * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a - * port number and its peer IP address. + * Output includes socket fd instead of socket pointer address to avoid + * leaking kernel memory address in: + * /sys/devices/platform/vhci_hcd.0/status and in debug output. + * The socket pointer address is not used at the moment and it was made + * visible as a convenient way to find IP address from socket pointer + * address by looking up /proc/net/{tcp,tcp6}. As this opens a security + * hole, the change is made to use sockfd instead. + * */ static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev) { @@ -39,8 +44,8 @@ static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vd if (vdev->ud.status == VDEV_ST_USED) { *out += sprintf(*out, "%03u %08x ", vdev->speed, vdev->devid); - *out += sprintf(*out, "%16p %s", - vdev->ud.tcp_socket, + *out += sprintf(*out, "%u %s", + vdev->ud.sockfd, dev_name(&vdev->udev->dev)); } else { @@ -160,7 +165,8 @@ static ssize_t nports_show(struct device *dev, struct device_attribute *attr, char *s = out; /* - * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2. + * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, + * thus the * 2. */ out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers); return out - s; @@ -366,6 +372,7 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, vdev->devid = devid; vdev->speed = speed; + vdev->ud.sockfd = sockfd; vdev->ud.tcp_socket = socket; vdev->ud.status = VDEV_ST_NOTASSIGNED; diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index 627d1df..c9c8161 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -50,14 +50,14 @@ static int parse_status(const char *value) while (*c != '\0') { int port, status, speed, devid; - unsigned long socket; + int sockfd; char lbusid[SYSFS_BUS_ID_SIZE]; struct usbip_imported_device *idev; char hub[3]; - ret = sscanf(c, "%2s %d %d %d %x %lx %31s\n", + ret = sscanf(c, "%2s %d %d %d %x %u %31s\n", hub, &port, &status, &speed, - &devid, &socket, lbusid); + &devid, &sockfd, lbusid); if (ret < 5) { dbg("sscanf failed: %d", ret); @@ -66,7 +66,7 @@ static int parse_status(const char *value) dbg("hub %s port %d status %d speed %d devid %x", hub, port, status, speed, devid); - dbg("socket %lx lbusid %s", socket, lbusid); + dbg("sockfd %u lbusid %s", sockfd, lbusid); /* if a device is connected, look at it */ idev = &vhci_driver->idev[port]; -- cgit v1.1 From be6123df1ea8f01ee2f896a16c2b7be3e4557a5a Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:50 -0700 Subject: usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_tx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index b18bce9..53172b1 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -167,6 +167,13 @@ static int stub_send_ret_submit(struct stub_device *sdev) memset(&pdu_header, 0, sizeof(pdu_header)); memset(&msg, 0, sizeof(msg)); + if (urb->actual_length > 0 && !urb->transfer_buffer) { + dev_err(&sdev->udev->dev, + "urb: actual_length %d transfer_buffer null\n", + urb->actual_length); + return -1; + } + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) iovnum = 2 + urb->number_of_packets; else -- cgit v1.1 From 5d9b70f7d52eb14bb37861c663bae44de9521c35 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 8 Dec 2017 18:10:05 +0200 Subject: xhci: Don't add a virt_dev to the devs array before it's fully allocated Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Cc: stable Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 15f7d42..3a29b32 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -971,10 +971,9 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, return 0; } - xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags); - if (!xhci->devs[slot_id]) + dev = kzalloc(sizeof(*dev), flags); + if (!dev) return 0; - dev = xhci->devs[slot_id]; /* Allocate the (output) device context that will be used in the HC. */ dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags); @@ -1015,9 +1014,17 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, trace_xhci_alloc_virt_device(dev); + xhci->devs[slot_id] = dev; + return 1; fail: - xhci_free_virt_device(xhci, slot_id); + + if (dev->in_ctx) + xhci_free_container_ctx(xhci, dev->in_ctx); + if (dev->out_ctx) + xhci_free_container_ctx(xhci, dev->out_ctx); + kfree(dev); + return 0; } -- cgit v1.1 From 72b663a99c074a8d073e7ecdae446cfb024ef551 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 8 Dec 2017 18:10:06 +0200 Subject: usb: xhci: fix TDS for MTK xHCI1.1 For MTK's xHCI 1.0 or latter, TD size is the number of max packet sized packets remaining in the TD, not including this TRB (following spec). For MTK's xHCI 0.96 and older, TD size is the number of max packet sized packets remaining in the TD, including this TRB (not following spec). Cc: stable Signed-off-by: Chunfeng Yun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6eb87c6..c5cbc68 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3112,7 +3112,7 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, { u32 maxp, total_packet_count; - /* MTK xHCI is mostly 0.97 but contains some features from 1.0 */ + /* MTK xHCI 0.96 contains some features from 1.0 */ if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST)) return ((td_total_len - transferred) >> 10); @@ -3121,8 +3121,8 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, trb_buff_len == td_total_len) return 0; - /* for MTK xHCI, TD size doesn't include this TRB */ - if (xhci->quirks & XHCI_MTK_HOST) + /* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */ + if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100)) trb_buff_len = 0; maxp = usb_endpoint_maxp(&urb->ep->desc); -- cgit v1.1 From 8722e095f5a44d0e409e45c5ddc2ee9cf589c777 Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Thu, 30 Nov 2017 15:31:06 +0000 Subject: usb: dwc3: gadget: Wait longer for controller to end command processing DWC3_DEPCMD_ENDTRANSFER has been witnessed to require around 600 iterations before controller would become idle again after unplugging the USB cable with AIO reads submitted. Bump timeout from 500 iterations to 1000 so dwc3_stop_active_transfer does not receive -ETIMEDOUT and does not WARN: [ 81.326273] ------------[ cut here ]------------ [ 81.335341] WARNING: CPU: 0 PID: 1874 at drivers/usb/dwc3/gadget.c:2627 dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.347094] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil dwc3 intel_powerclamp coretemp ulpi kvm_intel udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd basincove_gpadc industrialio gpio_keys usbcore usb_common [ 81.378142] CPU: 0 PID: 1874 Comm: irq/34-dwc3 Not tainted 4.14.0-edison+ #119 [ 81.385545] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 81.394548] task: f5b1be00 task.stack: f420a000 [ 81.399219] EIP: dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.406086] EFLAGS: 00010086 CPU: 0 [ 81.409672] EAX: 0000001f EBX: f5729800 ECX: c132a2a2 EDX: 00000000 [ 81.416096] ESI: f4054014 EDI: f41cf400 EBP: f420be10 ESP: f420bdf4 [ 81.422521] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 81.428061] CR0: 80050033 CR2: b7a3f000 CR3: 01d94000 CR4: 001006d0 [ 81.434483] Call Trace: [ 81.437063] __dwc3_gadget_ep_disable+0xa3/0x2b0 [dwc3] [ 81.442438] ? _raw_spin_lock_irqsave+0x32/0x40 [ 81.447135] dwc3_gadget_ep_disable+0xbf/0xe0 [dwc3] [ 81.452269] usb_ep_disable+0x1c/0xd0 [udc_core] [ 81.457048] ffs_func_eps_disable.isra.15+0x3b/0x90 [usb_f_fs] [ 81.463070] ffs_func_set_alt+0x7d/0x310 [usb_f_fs] [ 81.468132] ffs_func_disable+0x14/0x20 [usb_f_fs] [ 81.473075] reset_config+0x5b/0x90 [libcomposite] [ 81.478023] composite_disconnect+0x2b/0x50 [libcomposite] [ 81.483685] dwc3_disconnect_gadget+0x39/0x50 [dwc3] [ 81.488808] dwc3_gadget_disconnect_interrupt+0x21b/0x250 [dwc3] [ 81.495014] dwc3_thread_interrupt+0x2a8/0xf70 [dwc3] [ 81.500219] ? __schedule+0x78c/0x7e0 [ 81.504027] irq_thread_fn+0x18/0x30 [ 81.507715] ? irq_thread+0xb7/0x180 [ 81.511400] irq_thread+0x111/0x180 [ 81.515000] ? irq_finalize_oneshot+0xe0/0xe0 [ 81.519490] ? wake_threads_waitq+0x30/0x30 [ 81.523806] kthread+0x107/0x110 [ 81.527131] ? disable_percpu_irq+0x50/0x50 [ 81.531439] ? kthread_stop+0x150/0x150 [ 81.535397] ret_from_fork+0x19/0x24 [ 81.539136] Code: 89 d8 c7 45 ec 00 00 00 00 c7 45 f0 00 00 00 00 c7 45 f4 00 00 00 00 e8 56 ef ff ff 85 c0 74 12 50 68 b9 1c 14 f8 e8 64 0f f7 c8 <0f> ff 58 5a 8d 76 00 8b 83 98 00 00 00 c6 83 a0 00 00 00 00 83 [ 81.559295] ---[ end trace f3133eec81a473b8 ]--- Number of iterations measured on 4 consecutive unplugs: [ 1088.799777] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 605 times [ 1222.024986] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 580 times [ 1317.590452] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 598 times [ 1453.218314] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 594 times Signed-off-by: Vincent Pelletier Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 981fd98..01e595b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -259,7 +259,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 500; + u32 timeout = 1000; u32 reg; int cmd_status = 0; -- cgit v1.1 From ded600ea9fb51a495d2fcd21e90351df876488e8 Mon Sep 17 00:00:00 2001 From: Andreas Platschek Date: Thu, 7 Dec 2017 11:32:20 +0100 Subject: usb: dwc3: of-simple: fix missing clk_disable_unprepare If of_clk_get() fails, the clean-up of already initialized clocks should be the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare() for each clock should be called before the clk_put(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization") Signed-off-by: Andreas Platschek Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index c4a4d7b..762370d 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -51,8 +51,10 @@ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) clk = of_clk_get(np, i); if (IS_ERR(clk)) { - while (--i >= 0) + while (--i >= 0) { + clk_disable_unprepare(simple->clks[i]); clk_put(simple->clks[i]); + } return PTR_ERR(clk); } -- cgit v1.1 From a0d8c4cfdf31a9576f683628e50b76714c785ef1 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 7 Dec 2017 13:40:24 +0900 Subject: usb: dwc3: of-simple: set dev_pm_ops dwc3_of_simple_dev_pm_ops has never been used since the initial support by commit 16adc674d0d6 ("usb: dwc3: add generic OF glue layer"). I guess it just missed to set .pm struct member. Signed-off-by: Masahiro Yamada Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 762370d..7ae0eef 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -205,6 +205,7 @@ static struct platform_driver dwc3_of_simple_driver = { .driver = { .name = "dwc3-of-simple", .of_match_table = of_dwc3_simple_match, + .pm = &dwc3_of_simple_dev_pm_ops, }, }; -- cgit v1.1 From ec5bb87e4e2a1d3a35563a7bcfac9febf67aba9d Mon Sep 17 00:00:00 2001 From: Manu Gautam Date: Wed, 6 Dec 2017 12:49:04 +0530 Subject: usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3 For isochronous endpoints with ep->mult less than 3, PCM1 value of trb->size in set incorrectly. For ep->mult = 2, this is set to 0/-1 and for ep->mult = 1, this is set to -2. This is because the initial mult is set to ep->mult - 1 instead of 2. Signed-off-by: Manu Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 01e595b..639dd1b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -912,7 +912,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, */ if (speed == USB_SPEED_HIGH) { struct usb_ep *ep = &dep->endpoint; - unsigned int mult = ep->mult - 1; + unsigned int mult = 2; unsigned int maxp = usb_endpoint_maxp(ep->desc); if (length <= (2 * maxp)) -- cgit v1.1 From 9273083a1530891360e9fe4fad26ae96810db499 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 30 Nov 2017 12:16:37 +0400 Subject: usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues In host mode reading from DPTXSIZn returning invalid value in dwc2_check_param_tx_fifo_sizes function. In total TxFIFO size calculations unnecessarily reducing by ep_info. hw->total_fifo_size can be fully allocated for FIFO's. Added num_dev_in_eps member in dwc2_hw_params structure to save number of IN EPs. Added g_tx_fifo_size array in dwc2_hw_params structure to store power on reset values of DPTXSIZn registers in forced device mode. Updated dwc2_hsotg_tx_fifo_count() function to get TxFIFO count from num_dev_in_eps. Updated dwc2_get_dev_hwparams() function to store DPTXFSIZn in g_tx_fifo_size array. dwc2_get_host/dev_hwparams() functions call moved after num_dev_in_eps set from hwcfg4. Modified dwc2_check_param_tx_fifo_sizes() function to check TxFIFOn sizes based on g_tx_fifo_size array. Removed ep_info subtraction during calculation of tx_addr_max in dwc2_hsotg_tx_fifo_total_depth() function. Also removed dwc2_hsotg_ep_info_size() function as no more need. Acked-by: John Youn Signed-off-by: Gevorg Sahakyan Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 4 ++++ drivers/usb/dwc2/gadget.c | 42 ++---------------------------------------- drivers/usb/dwc2/params.c | 29 +++++++++++++++++++---------- 3 files changed, 25 insertions(+), 50 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index f66c9413..31749c7 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -537,6 +537,7 @@ struct dwc2_core_params { * 2 - Internal DMA * @power_optimized Are power optimizations enabled? * @num_dev_ep Number of device endpoints available + * @num_dev_in_eps Number of device IN endpoints available * @num_dev_perio_in_ep Number of device periodic IN endpoints * available * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue @@ -565,6 +566,7 @@ struct dwc2_core_params { * 2 - 8 or 16 bits * @snpsid: Value from SNPSID register * @dev_ep_dirs: Direction of device endpoints (GHWCFG1) + * @g_tx_fifo_size[] Power-on values of TxFIFO sizes */ struct dwc2_hw_params { unsigned op_mode:3; @@ -586,12 +588,14 @@ struct dwc2_hw_params { unsigned fs_phy_type:2; unsigned i2c_enable:1; unsigned num_dev_ep:4; + unsigned num_dev_in_eps : 4; unsigned num_dev_perio_in_ep:4; unsigned total_fifo_size:16; unsigned power_optimized:1; unsigned utmi_phy_data_width:2; u32 snpsid; u32 dev_ep_dirs; + u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; }; /* Size of control and EP0 buffers */ diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 88529d0..e4c3ce0 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -195,55 +195,18 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) { if (hsotg->hw_params.en_multiple_tx_fifo) /* In dedicated FIFO mode we need count of IN EPs */ - return (dwc2_readl(hsotg->regs + GHWCFG4) & - GHWCFG4_NUM_IN_EPS_MASK) >> GHWCFG4_NUM_IN_EPS_SHIFT; + return hsotg->hw_params.num_dev_in_eps; else /* In shared FIFO mode we need count of Periodic IN EPs */ return hsotg->hw_params.num_dev_perio_in_ep; } /** - * dwc2_hsotg_ep_info_size - return Endpoint Info Control block size in DWORDs - */ -static int dwc2_hsotg_ep_info_size(struct dwc2_hsotg *hsotg) -{ - int val = 0; - int i; - u32 ep_dirs; - - /* - * Don't need additional space for ep info control registers in - * slave mode. - */ - if (!using_dma(hsotg)) { - dev_dbg(hsotg->dev, "Buffer DMA ep info size 0\n"); - return 0; - } - - /* - * Buffer DMA mode - 1 location per endpoit - * Descriptor DMA mode - 4 locations per endpoint - */ - ep_dirs = hsotg->hw_params.dev_ep_dirs; - - for (i = 0; i <= hsotg->hw_params.num_dev_ep; i++) { - val += ep_dirs & 3 ? 1 : 2; - ep_dirs >>= 2; - } - - if (using_desc_dma(hsotg)) - val = val * 4; - - return val; -} - -/** * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for * device mode TX FIFOs */ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) { - int ep_info_size; int addr; int tx_addr_max; u32 np_tx_fifo_size; @@ -252,8 +215,7 @@ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) hsotg->params.g_np_tx_fifo_size); /* Get Endpoint Info Control block size in DWORDs. */ - ep_info_size = dwc2_hsotg_ep_info_size(hsotg); - tx_addr_max = hsotg->hw_params.total_fifo_size - ep_info_size; + tx_addr_max = hsotg->hw_params.total_fifo_size; addr = hsotg->params.g_rx_fifo_size + np_tx_fifo_size; if (tx_addr_max <= addr) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index ef73af6..03fd20f 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -484,8 +484,7 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) } for (fifo = 1; fifo <= fifo_count; fifo++) { - dptxfszn = (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) & - FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; + dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo]; if (hsotg->params.g_tx_fifo_size[fifo] < min || hsotg->params.g_tx_fifo_size[fifo] > dptxfszn) { @@ -609,6 +608,7 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) struct dwc2_hw_params *hw = &hsotg->hw_params; bool forced; u32 gnptxfsiz; + int fifo, fifo_count; if (hsotg->dr_mode == USB_DR_MODE_HOST) return; @@ -617,6 +617,14 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); + fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + + for (fifo = 1; fifo <= fifo_count; fifo++) { + hw->g_tx_fifo_size[fifo] = + (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) & + FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; + } + if (forced) dwc2_clear_force_mode(hsotg); @@ -661,14 +669,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); - /* - * Host specific hardware parameters. Reading these parameters - * requires the controller to be in host mode. The mode will - * be forced, if necessary, to read these values. - */ - dwc2_get_host_hwparams(hsotg); - dwc2_get_dev_hwparams(hsotg); - /* hwcfg1 */ hw->dev_ep_dirs = hwcfg1; @@ -711,6 +711,8 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN); hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >> GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; + hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >> + GHWCFG4_NUM_IN_EPS_SHIFT; hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA); hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ); hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> @@ -719,6 +721,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) /* fifo sizes */ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> GRXFSIZ_DEPTH_SHIFT; + /* + * Host specific hardware parameters. Reading these parameters + * requires the controller to be in host mode. The mode will + * be forced, if necessary, to read these values. + */ + dwc2_get_host_hwparams(hsotg); + dwc2_get_dev_hwparams(hsotg); return 0; } -- cgit v1.1 From 54eed78c5c831ba696259f7fa69966d699a173b1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 11 Dec 2017 12:30:14 +0100 Subject: usb: gadget: webcam: fix V4L2 Kconfig dependency Configuring the USB_G_WEBCAM driver as built-in leads to a link error when CONFIG_VIDEO_V4L2 is a loadable module: drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_setup': f_uvc.c:(.text+0xfe): undefined reference to `v4l2_event_queue' drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_ep0_complete': f_uvc.c:(.text+0x188): undefined reference to `v4l2_event_queue' This changes the Kconfig dependency to disallow that configuration, and force it to be a module in that case as well. This is apparently a rather old bug, but very hard to trigger even in thousands of randconfig builds. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 9570bbe..487568f 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -487,7 +487,7 @@ endif # or video class gadget drivers), or specific hardware, here. config USB_G_WEBCAM tristate "USB Webcam Gadget" - depends on VIDEO_DEV + depends on VIDEO_V4L2 select USB_LIBCOMPOSITE select VIDEOBUF2_VMALLOC select USB_F_UVC -- cgit v1.1 From 9dbe416b656bb015fc49fc17961000ffa418838a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 12 Dec 2017 12:44:40 +0200 Subject: Revert "usb: gadget: allow to enable legacy drivers without USB_ETH" This reverts commit 7a9618a22aadffb55027d665491adf466bced61a. Romain Izard recently reported that commit 7a9618a22aad ended up allowing every legacy gadget driver to statically linked to the kernel, however that doesn't work, since only one legacy gadget can be bound to a controller. Because of that, let's revert the original commit and fix the problem. Reported-by: Romain Izard Signed-off-by: Felipe Balbi --- drivers/usb/gadget/Kconfig | 4 ++-- drivers/usb/gadget/legacy/Kconfig | 10 ---------- 2 files changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 0a19a76..31cce78 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -508,8 +508,8 @@ choice controller, and the relevant drivers for each function declared by the device. -endchoice - source "drivers/usb/gadget/legacy/Kconfig" +endchoice + endif # USB_GADGET diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 487568f..784bf86 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -13,14 +13,6 @@ # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # -menuconfig USB_GADGET_LEGACY - bool "Legacy USB Gadget Support" - help - Legacy USB gadgets are USB gadgets that do not use the USB gadget - configfs interface. - -if USB_GADGET_LEGACY - config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -498,5 +490,3 @@ config USB_G_WEBCAM Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_webcam". - -endif -- cgit v1.1 From 32fd87b3bbf5f7a045546401dfe2894dbbf4d8c3 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Mon, 11 Dec 2017 22:48:41 +0100 Subject: USB: core: only clean up what we allocated When cleaning up the configurations, make sure we only free the number of configurations and interfaces that we could have allocated. Reported-by: Andrey Konovalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 55b198b..93b3847 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -764,18 +764,21 @@ void usb_destroy_configuration(struct usb_device *dev) return; if (dev->rawdescriptors) { - for (i = 0; i < dev->descriptor.bNumConfigurations; i++) + for (i = 0; i < dev->descriptor.bNumConfigurations && + i < USB_MAXCONFIG; i++) kfree(dev->rawdescriptors[i]); kfree(dev->rawdescriptors); dev->rawdescriptors = NULL; } - for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { + for (c = 0; c < dev->descriptor.bNumConfigurations && + c < USB_MAXCONFIG; c++) { struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - for (i = 0; i < cf->desc.bNumInterfaces; i++) { + for (i = 0; i < cf->desc.bNumInterfaces && + i < USB_MAXINTERFACES; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, usb_release_interface_cache); -- cgit v1.1 From cf4df407e0d7cde60a45369c2a3414d18e2d4fdd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 13 Dec 2017 11:59:39 +0100 Subject: Revert "USB: core: only clean up what we allocated" This reverts commit 32fd87b3bbf5f7a045546401dfe2894dbbf4d8c3. Alan wrote a better fix for this... Cc: Andrey Konovalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 93b3847..55b198b 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -764,21 +764,18 @@ void usb_destroy_configuration(struct usb_device *dev) return; if (dev->rawdescriptors) { - for (i = 0; i < dev->descriptor.bNumConfigurations && - i < USB_MAXCONFIG; i++) + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) kfree(dev->rawdescriptors[i]); kfree(dev->rawdescriptors); dev->rawdescriptors = NULL; } - for (c = 0; c < dev->descriptor.bNumConfigurations && - c < USB_MAXCONFIG; c++) { + for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - for (i = 0; i < cf->desc.bNumInterfaces && - i < USB_MAXINTERFACES; i++) { + for (i = 0; i < cf->desc.bNumInterfaces; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, usb_release_interface_cache); -- cgit v1.1 From 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 12 Dec 2017 14:25:13 -0500 Subject: USB: core: prevent malicious bNumInterfaces overflow A malicious USB device with crafted descriptors can cause the kernel to access unallocated memory by setting the bNumInterfaces value too high in a configuration descriptor. Although the value is adjusted during parsing, this adjustment is skipped in one of the error return paths. This patch prevents the problem by setting bNumInterfaces to 0 initially. The existing code already sets it to the proper value after parsing is complete. Signed-off-by: Alan Stern Reported-by: Andrey Konovalov CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 55b198b..78e92d2 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -555,6 +555,9 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, unsigned iad_num = 0; memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); + nintf = nintf_orig = config->desc.bNumInterfaces; + config->desc.bNumInterfaces = 0; // Adjusted later + if (config->desc.bDescriptorType != USB_DT_CONFIG || config->desc.bLength < USB_DT_CONFIG_SIZE || config->desc.bLength > size) { @@ -568,7 +571,6 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, buffer += config->desc.bLength; size -= config->desc.bLength; - nintf = nintf_orig = config->desc.bNumInterfaces; if (nintf > USB_MAXINTERFACES) { dev_warn(ddev, "config %d has too many interfaces: %d, " "using maximum allowed: %d\n", -- cgit v1.1