From c31469747854a1f1dcfd81a8fb1d9865c3ee58b9 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 5 Jul 2011 03:38:23 -0700 Subject: arm: omap3: cm-t35: add support for cm-t3730 cm-t3730 is basically the same board as cm-t35, but has AM/DM3730 SoC assembled and therefore some changes are required. Signed-off-by: Igor Grinberg Acked-by: Mike Rapoport [tony@atomide.com: updated for init_irq cleanup as noted by khilman@ti.com] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 6 ++- arch/arm/mach-omap2/board-cm-t35.c | 77 ++++++++++++++++++++++------ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 3 files changed, 67 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891..4ae6257 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3 select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y + select MACH_CM_T3730 select OMAP_PACKAGE_CUS config MACH_CM_T3517 @@ -277,6 +278,9 @@ config MACH_CM_T3517 default y select OMAP_PACKAGE_CBB +config MACH_CM_T3730 + bool + config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 9d585ca..fcd4032 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -1,5 +1,5 @@ /* - * board-cm-t35.c (CompuLab CM-T35 module) + * CompuLab CM-T35/CM-T3730 modules support * * Copyright (C) 2009-2011 CompuLab, Ltd. * Authors: Mike Rapoport @@ -570,17 +570,11 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* DSS */ + /* common DSS */ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), @@ -593,12 +587,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -611,19 +599,53 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static void __init cm_t3x_common_dss_mux_init(int mux_mode) +{ + omap_mux_init_signal("dss_data18", mux_mode); + omap_mux_init_signal("dss_data19", mux_mode); + omap_mux_init_signal("dss_data20", mux_mode); + omap_mux_init_signal("dss_data21", mux_mode); + omap_mux_init_signal("dss_data22", mux_mode); + omap_mux_init_signal("dss_data23", mux_mode); +} + +static void __init cm_t35_init_mux(void) +{ + omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); +} + +static void __init cm_t3730_init_mux(void) +{ + omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); +} +#else +static inline void cm_t35_init_mux(void) {} +static inline void cm_t3730_init_mux(void) {} #endif static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; -static void __init cm_t35_init(void) +static void __init cm_t3x_common_init(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); - cm_t35_init_nand(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); @@ -633,6 +655,19 @@ static void __init cm_t35_init(void) usbhs_init(&usbhs_bdata); } +static void __init cm_t35_init(void) +{ + cm_t3x_common_init(); + cm_t35_init_mux(); + cm_t35_init_nand(); +} + +static void __init cm_t3730_init(void) +{ + cm_t3x_common_init(); + cm_t3730_init_mux(); +} + MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, .reserve = omap_reserve, @@ -642,3 +677,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .timer = &omap3_timer, MACHINE_END + +MACHINE_START(CM_T3730, "Compulab CM-T3730") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap3_init_irq, + .init_machine = cm_t3730_init, + .timer = &omap3_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ac4b60d..a067484 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); -- cgit v1.1