From b7c2b6157079811586180d13c44a1095b57c2d47 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 4 Feb 2014 15:05:55 +0100 Subject: ARM: at91: add Atmel's SAMA5D3 Xplained board Add DT file for new SAMA5D3 Xplained board. This board is based on Atmel's SAMA5D36 Cortex-A5 SoC. Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sama5d3_xplained.dts | 229 ++++++++++++++++++++++++++++ 2 files changed, 230 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama5d3_xplained.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b..6d1e43d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb # sama5d3 +dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts new file mode 100644 index 0000000..ce13755 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -0,0 +1,229 @@ +/* + * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Xplained"; + compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; + }; + + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>; + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + uart0: serial@f0024000 { + status = "okay"; + }; + + mmc1: mmc@f8000000 { + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; + }; + }; + + spi1: spi@f8008000 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + >; + status = "okay"; + }; + + i2c2: i2c@f801c000 { + dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + ; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + ; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + ; /* PE9, conflicts with A9 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_LOW + &pioE 4 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + bp3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ + linux,default-trigger = "heartbeat"; + }; + + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; -- cgit v1.1