From 7e30ed6bdd91ae73c34fc37b57fcccc8640641f9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 12:47:00 -0400 Subject: gmux: Add generic write32 function Move the special-cased backlight update function to a generic gmux_write32 function. Signed-off-by: Matthew Garrett Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 905fa01..c9db5072 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -75,6 +75,18 @@ static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) return inl(gmux_data->iostart + port); } +static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, port + i); + } +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -90,16 +102,7 @@ static int gmux_update_status(struct backlight_device *bd) if (bd->props.state & BL_CORE_SUSPENDED) return 0; - /* - * Older gmux versions require writing out lower bytes first then - * setting the upper byte to 0 to flush the values. Newer versions - * accept a single u32 write, but the old method also works, so we - * just use the old method for all gmux versions. - */ - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 1, brightness >> 8); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 2, brightness >> 16); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 3, 0); + gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); return 0; } -- cgit v1.1 From 96ff705638e3d61b1e45a047c0f9f3bb622fa32f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 13:45:01 -0400 Subject: apple_gmux: Add support for newer hardware New gmux devices have a different method for accessing the registers. Update the driver to cope. Incorporates feedback from Bernhard Froemel. Signed-off-by: Matthew Garrett Cc: Bernhard Froemel Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 179 +++++++++++++++++++++++++++++++++++--- 1 file changed, 165 insertions(+), 14 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index c9db5072..0d140e1 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -18,12 +18,15 @@ #include #include #include +#include #include #include struct apple_gmux_data { unsigned long iostart; unsigned long iolen; + bool indexed; + struct mutex index_lock; struct backlight_device *bdev; }; @@ -45,6 +48,9 @@ struct apple_gmux_data { #define GMUX_PORT_DISCRETE_POWER 0x50 #define GMUX_PORT_MAX_BRIGHTNESS 0x70 #define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 #define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) @@ -59,24 +65,24 @@ struct apple_gmux_data { #define GMUX_BRIGHTNESS_MASK 0x00ffffff #define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK -static inline u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port) { return inb(gmux_data->iostart + port); } -static inline void gmux_write8(struct apple_gmux_data *gmux_data, int port, +static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port, u8 val) { outb(val, gmux_data->iostart + port); } -static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port) { return inl(gmux_data->iostart + port); } -static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, - u32 val) +static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) { int i; u8 tmpval; @@ -87,6 +93,144 @@ static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, } } +static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(gmux_data->iostart + GMUX_PORT_READ); + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(gmux_data->iostart + GMUX_PORT_READ); + + return !!i; +} + +static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) +{ + u8 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inb(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + mutex_lock(&gmux_data->index_lock); + outb(val, gmux_data->iostart + GMUX_PORT_VALUE); + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) +{ + u32 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inl(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + mutex_lock(&gmux_data->index_lock); + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i); + } + + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read8(gmux_data, port); + else + return gmux_pio_read8(gmux_data, port); +} + +static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) +{ + if (gmux_data->indexed) + gmux_index_write8(gmux_data, port, val); + else + gmux_pio_write8(gmux_data, port, val); +} + +static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read32(gmux_data, port); + else + return gmux_pio_read32(gmux_data, port); +} + +static void gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + if (gmux_data->indexed) + gmux_index_write32(gmux_data, port, val); + else + gmux_pio_write32(gmux_data, port, val); +} + +static bool gmux_is_indexed(struct apple_gmux_data *gmux_data) +{ + u16 val; + + outb(0xaa, gmux_data->iostart + 0xcc); + outb(0x55, gmux_data->iostart + 0xcd); + outb(0x00, gmux_data->iostart + 0xce); + + val = inb(gmux_data->iostart + 0xcc) | + (inb(gmux_data->iostart + 0xcd) << 8); + + if (val == 0x55aa) + return true; + + return false; +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -150,22 +294,29 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, } /* - * On some machines the gmux is in ACPI even thought the machine - * doesn't really have a gmux. Check for invalid version information - * to detect this. + * Invalid version information may indicate either that the gmux + * device isn't present or that it's a new one that uses indexed + * io */ + ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { - pr_info("gmux device not present\n"); - ret = -ENODEV; - goto err_release; + if (gmux_is_indexed(gmux_data)) { + mutex_init(&gmux_data->index_lock); + gmux_data->indexed = true; + } else { + pr_info("gmux device not present\n"); + ret = -ENODEV; + goto err_release; + } + pr_info("Found indexed gmux\n"); + } else { + pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, + ver_release); } - pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, - ver_release); - memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); -- cgit v1.1 From 9f6f955ae4994dd4ad5513a0d959468763a45fa5 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 17 Aug 2012 16:57:20 -0400 Subject: apple_gmux: Fix ACPI video unregister We were only calling acpi_video_unregister() if ACPI video support was built in, not if it was a module. Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 0d140e1..85e1bfb 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -348,7 +348,7 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, * Disable the other backlight choices. */ acpi_video_dmi_promote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_unregister(); #endif apple_bl_unregister(); @@ -371,7 +371,7 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) kfree(gmux_data); acpi_video_dmi_demote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_register(); #endif apple_bl_register(); -- cgit v1.1 From a50bd128f28cf81c1250874fc53728e113f12957 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 26 Jul 2012 17:13:31 +0800 Subject: asus-wmi: record wlan status while controlled by userapp MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the user bit is set, that mean BIOS can't set and record the wlan status, it will report the value read from id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while we query the wlan status by id ASUS_WMI_DEVID_WLAN (0x00010011) through WMI. So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while setting the wlan status through WMI. This is also the behavior that windows app will do. Quote from ASUS application engineer === When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return (1) 0x00050001 (On) (2) 0x00050000 (Off) (3) 0x00030001 (On) (4) 0x00030000 (Off) (5) 0x00000002 (Unknown) (1), (2) means that the model has hardware GPIO for WLAN, you can call WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off. (3), (4) means that the model doesn’t have hardware GPIO, you need to use API or driver library to turn WLAN on/off, and call WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status. After you set WLAN LED status, you can see the WLAN status is changed with WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly (ex: Windows), you can use it for synchronization. (5) means that the model doesn’t have WLAN device. WLAN is the ONLY special case with upper rule. For other device, like Bluetooth, you just need use WMIMethod(DSTS, 0x00010013) to get, and WMIMethod(DEVS, 0x00010013, 1 or 0) to set. === Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-wmi.c | 21 ++++++++++++++++++++- drivers/platform/x86/asus-wmi.h | 1 + 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index c7a36f6..2eb9fe8 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -101,6 +101,7 @@ MODULE_LICENSE("GPL"); #define ASUS_WMI_DEVID_WIRELESS_LED 0x00010002 #define ASUS_WMI_DEVID_CWAP 0x00010003 #define ASUS_WMI_DEVID_WLAN 0x00010011 +#define ASUS_WMI_DEVID_WLAN_LED 0x00010012 #define ASUS_WMI_DEVID_BLUETOOTH 0x00010013 #define ASUS_WMI_DEVID_GPS 0x00010015 #define ASUS_WMI_DEVID_WIMAX 0x00010017 @@ -731,8 +732,21 @@ static int asus_rfkill_set(void *data, bool blocked) { struct asus_rfkill *priv = data; u32 ctrl_param = !blocked; + u32 dev_id = priv->dev_id; - return asus_wmi_set_devstate(priv->dev_id, ctrl_param, NULL); + /* + * If the user bit is set, BIOS can't set and record the wlan status, + * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED + * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). + * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED + * while setting the wlan status through WMI. + * This is also the behavior that windows app will do. + */ + if ((dev_id == ASUS_WMI_DEVID_WLAN) && + priv->asus->driver->wlan_ctrl_by_user) + dev_id = ASUS_WMI_DEVID_WLAN_LED; + + return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); } static void asus_rfkill_query(struct rfkill *rfkill, void *data) @@ -1653,6 +1667,7 @@ static int asus_wmi_add(struct platform_device *pdev) struct asus_wmi *asus; acpi_status status; int err; + u32 result; asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); if (!asus) @@ -1711,6 +1726,10 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_debugfs; + asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); + if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) + asus->driver->wlan_ctrl_by_user = 1; + return 0; fail_debugfs: diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 9c1da8b..4c9bd38 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -46,6 +46,7 @@ struct quirk_entry { struct asus_wmi_driver { int brightness; int panel_power; + int wlan_ctrl_by_user; const char *name; struct module *owner; -- cgit v1.1 From f94f0f103c440f1dbe5d89a28c92fd1a9bdf7012 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Thu, 2 Aug 2012 12:15:14 -0500 Subject: apple-gmux: Fix kconfig dependencies Fix the dependencies of apple-gmux to prevent it from being built-in when one or more of its dependencies is built as a module. Otherwise it can fail to build due to missing symbols. v2: Add dependency on ACPI to fix build failure when ACPI=n Reported-by: Arun Raghavan Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2a262f5..637074d 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -758,8 +758,11 @@ config SAMSUNG_Q10 config APPLE_GMUX tristate "Apple Gmux Driver" + depends on ACPI depends on PNP - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE + depends on ACPI_VIDEO=n || ACPI_VIDEO ---help--- This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid -- cgit v1.1 From 76b487dd5187a4d7cc6eccd452f65467a8c7768b Mon Sep 17 00:00:00 2001 From: Andreas Heider Date: Fri, 17 Aug 2012 11:17:04 -0500 Subject: apple-gmux: Add display mux support Add support for the gmux display muxing functionality and register a mux handler with vga_switcheroo. Signed-off-by: Andreas Heider Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 224 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 85e1bfb..dfb1a92 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -2,6 +2,7 @@ * Gmux driver for Apple laptops * * Copyright (C) Canonical Ltd. + * Copyright (C) 2010-2012 Andreas Heider * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -29,8 +32,17 @@ struct apple_gmux_data { struct mutex index_lock; struct backlight_device *bdev; + + /* switcheroo data */ + acpi_handle dhandle; + int gpe; + enum vga_switcheroo_client_id resume_client_id; + enum vga_switcheroo_state power_state; + struct completion powerchange_done; }; +static struct apple_gmux_data *apple_gmux_data; + /* * gmux port offsets. Many of these are not yet used, but may be in the * future, and it's useful to have them documented here anyhow. @@ -257,6 +269,146 @@ static const struct backlight_ops gmux_bl_ops = { .update_status = gmux_update_status, }; +static int gmux_switchto(enum vga_switcheroo_client_id id) +{ + if (id == VGA_SWITCHEROO_IGD) { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2); + } else { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); + } + + return 0; +} + +static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data, + enum vga_switcheroo_state state) +{ + INIT_COMPLETION(gmux_data->powerchange_done); + + if (state == VGA_SWITCHEROO_ON) { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3); + pr_debug("Discrete card powered up\n"); + } else { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0); + pr_debug("Discrete card powered down\n"); + } + + gmux_data->power_state = state; + + if (gmux_data->gpe >= 0 && + !wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done, + msecs_to_jiffies(200))) + pr_warn("Timeout waiting for gmux switch to complete\n"); + + return 0; +} + +static int gmux_set_power_state(enum vga_switcheroo_client_id id, + enum vga_switcheroo_state state) +{ + if (id == VGA_SWITCHEROO_IGD) + return 0; + + return gmux_set_discrete_state(apple_gmux_data, state); +} + +static int gmux_get_client_id(struct pci_dev *pdev) +{ + /* + * Early Macbook Pros with switchable graphics use nvidia + * integrated graphics. Hardcode that the 9400M is integrated. + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + return VGA_SWITCHEROO_IGD; + else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == 0x0863) + return VGA_SWITCHEROO_IGD; + else + return VGA_SWITCHEROO_DIS; +} + +static enum vga_switcheroo_client_id +gmux_active_client(struct apple_gmux_data *gmux_data) +{ + if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2) + return VGA_SWITCHEROO_IGD; + + return VGA_SWITCHEROO_DIS; +} + +static struct vga_switcheroo_handler gmux_handler = { + .switchto = gmux_switchto, + .power_state = gmux_set_power_state, + .get_client_id = gmux_get_client_id, +}; + +static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_DISABLE); +} + +static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_ENABLE); +} + +static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data) +{ + return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS); +} + +static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) +{ + u8 status; + + /* to clear interrupts write back current status */ + status = gmux_interrupt_get_status(gmux_data); + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); +} + +static void gmux_notify_handler(acpi_handle device, u32 value, void *context) +{ + u8 status; + struct pnp_dev *pnp = (struct pnp_dev *)context; + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + + status = gmux_interrupt_get_status(gmux_data); + gmux_disable_interrupts(gmux_data); + pr_debug("Notify handler called: status %d\n", status); + + gmux_clear_interrupts(gmux_data); + gmux_enable_interrupts(gmux_data); + + if (status & GMUX_INTERRUPT_STATUS_POWER) + complete(&gmux_data->powerchange_done); +} + +static int gmux_suspend(struct pnp_dev *pnp, pm_message_t state) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_data->resume_client_id = gmux_active_client(gmux_data); + gmux_disable_interrupts(gmux_data); + return 0; +} + +static int gmux_resume(struct pnp_dev *pnp) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_enable_interrupts(gmux_data); + gmux_switchto(gmux_data->resume_client_id); + if (gmux_data->power_state == VGA_SWITCHEROO_OFF) + gmux_set_discrete_state(gmux_data, gmux_data->power_state); + return 0; +} + static int __devinit gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { @@ -266,6 +418,11 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, struct backlight_device *bdev; u8 ver_major, ver_minor, ver_release; int ret = -ENXIO; + acpi_status status; + unsigned long long gpe; + + if (apple_gmux_data) + return -EBUSY; gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); if (!gmux_data) @@ -353,8 +510,62 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, #endif apple_bl_unregister(); + gmux_data->power_state = VGA_SWITCHEROO_ON; + + gmux_data->dhandle = DEVICE_ACPI_HANDLE(&pnp->dev); + if (!gmux_data->dhandle) { + pr_err("Cannot find acpi handle for pnp device %s\n", + dev_name(&pnp->dev)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe); + if (ACPI_SUCCESS(status)) { + gmux_data->gpe = (int)gpe; + + status = acpi_install_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler, pnp); + if (ACPI_FAILURE(status)) { + pr_err("Install notify handler failed: %s\n", + acpi_format_exception(status)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_enable_gpe(NULL, gmux_data->gpe); + if (ACPI_FAILURE(status)) { + pr_err("Cannot enable gpe: %s\n", + acpi_format_exception(status)); + goto err_enable_gpe; + } + } else { + pr_warn("No GPE found for gmux\n"); + gmux_data->gpe = -1; + } + + if (vga_switcheroo_register_handler(&gmux_handler)) { + ret = -ENODEV; + goto err_register_handler; + } + + init_completion(&gmux_data->powerchange_done); + apple_gmux_data = gmux_data; + gmux_enable_interrupts(gmux_data); + return 0; +err_register_handler: + if (gmux_data->gpe >= 0) + acpi_disable_gpe(NULL, gmux_data->gpe); +err_enable_gpe: + if (gmux_data->gpe >= 0) + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); +err_notify: + backlight_device_unregister(bdev); err_release: release_region(gmux_data->iostart, gmux_data->iolen); err_free: @@ -366,8 +577,19 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) { struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + vga_switcheroo_unregister_handler(); + gmux_disable_interrupts(gmux_data); + if (gmux_data->gpe >= 0) { + acpi_disable_gpe(NULL, gmux_data->gpe); + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); + } + backlight_device_unregister(gmux_data->bdev); + release_region(gmux_data->iostart, gmux_data->iolen); + apple_gmux_data = NULL; kfree(gmux_data); acpi_video_dmi_demote_vendor(); @@ -387,6 +609,8 @@ static struct pnp_driver gmux_pnp_driver = { .probe = gmux_probe, .remove = __devexit_p(gmux_remove), .id_table = gmux_device_ids, + .suspend = gmux_suspend, + .resume = gmux_resume }; static int __init apple_gmux_init(void) -- cgit v1.1 From 36704c0c4c64f889d77158d497f6a7e596d1341c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:03 -0500 Subject: vga_switcheroo: Remove assumptions about registration/unregistration ordering vga_switcheroo assumes that the handler will be registered before the last client, otherwise switching will not be enabled. Likewise it's assumed that the handler will not be unregistered without at least one client also being unregistered, otherwise switching will remain enabled despite no longer having a handler. These assumptions cannot be enforced if the handler is in a separate driver from both clients, as with the gmux found in Apple laptops. Remove this assumption. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/vga/vga_switcheroo.c | 58 +++++++++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 5b3c7d1..e10ba37 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -70,27 +70,12 @@ static struct vgasr_priv vgasr_priv = { .clients = LIST_HEAD_INIT(vgasr_priv.clients), }; -int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) -{ - mutex_lock(&vgasr_mutex); - if (vgasr_priv.handler) { - mutex_unlock(&vgasr_mutex); - return -EINVAL; - } - - vgasr_priv.handler = handler; - mutex_unlock(&vgasr_mutex); - return 0; -} -EXPORT_SYMBOL(vga_switcheroo_register_handler); - -void vga_switcheroo_unregister_handler(void) +static bool vga_switcheroo_ready(void) { - mutex_lock(&vgasr_mutex); - vgasr_priv.handler = NULL; - mutex_unlock(&vgasr_mutex); + /* we're ready if we get two clients + handler */ + return !vgasr_priv.active && + vgasr_priv.registered_clients == 2 && vgasr_priv.handler; } -EXPORT_SYMBOL(vga_switcheroo_unregister_handler); static void vga_switcheroo_enable(void) { @@ -113,6 +98,37 @@ static void vga_switcheroo_enable(void) vgasr_priv.active = true; } +int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) +{ + mutex_lock(&vgasr_mutex); + if (vgasr_priv.handler) { + mutex_unlock(&vgasr_mutex); + return -EINVAL; + } + + vgasr_priv.handler = handler; + if (vga_switcheroo_ready()) { + printk(KERN_INFO "vga_switcheroo: enabled\n"); + vga_switcheroo_enable(); + } + mutex_unlock(&vgasr_mutex); + return 0; +} +EXPORT_SYMBOL(vga_switcheroo_register_handler); + +void vga_switcheroo_unregister_handler(void) +{ + mutex_lock(&vgasr_mutex); + vgasr_priv.handler = NULL; + if (vgasr_priv.active) { + pr_info("vga_switcheroo: disabled\n"); + vga_switcheroo_debugfs_fini(&vgasr_priv); + vgasr_priv.active = false; + } + mutex_unlock(&vgasr_mutex); +} +EXPORT_SYMBOL(vga_switcheroo_unregister_handler); + static int register_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, int id, bool active) @@ -134,9 +150,7 @@ static int register_client(struct pci_dev *pdev, if (client_is_vga(client)) vgasr_priv.registered_clients++; - /* if we get two clients + handler */ - if (!vgasr_priv.active && - vgasr_priv.registered_clients == 2 && vgasr_priv.handler) { + if (vga_switcheroo_ready()) { printk(KERN_INFO "vga_switcheroo: enabled\n"); vga_switcheroo_enable(); } -- cgit v1.1 From e99eac5e4ea3bd8671bb1cedad10c3fec90ec0de Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:02 -0500 Subject: vga_switcheroo: Don't require handler init callback This callback is a no-op in nouveau, and the upcoming apple-gmux switcheroo support won't require it either. Rather than forcing drivers to stub it out, just make it optional and remove the callback from nouveau. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 6 ------ drivers/gpu/vga/vga_switcheroo.c | 3 ++- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index fc841e8..26ebffe 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -211,11 +211,6 @@ static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id, return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state); } -static int nouveau_dsm_init(void) -{ - return 0; -} - static int nouveau_dsm_get_client_id(struct pci_dev *pdev) { /* easy option one - intel vendor ID means Integrated */ @@ -232,7 +227,6 @@ static int nouveau_dsm_get_client_id(struct pci_dev *pdev) static struct vga_switcheroo_handler nouveau_dsm_handler = { .switchto = nouveau_dsm_switchto, .power_state = nouveau_dsm_power_state, - .init = nouveau_dsm_init, .get_client_id = nouveau_dsm_get_client_id, }; diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index e10ba37..e25cf31 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -83,7 +83,8 @@ static void vga_switcheroo_enable(void) struct vga_switcheroo_client *client; /* call the handler to init */ - vgasr_priv.handler->init(); + if (vgasr_priv.handler->init) + vgasr_priv.handler->init(); list_for_each_entry(client, &vgasr_priv.clients, list) { if (client->id != -1) -- cgit v1.1 From a2174ba29a3026d50aa0b59297821ea9cccd75cc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Mon, 6 Aug 2012 09:48:58 +0800 Subject: dell-laptop: Fixed typo in touchpad LED quirk Fixed the typo introduced from the below commit 5f1e88f dell-laptop: Add 6 machines to touchpad led quirk Reported-by: Carlos Alberto Lopez Perez Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 4e96e8c..927c33a 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -211,7 +211,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -220,7 +220,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -229,7 +229,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5720"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -247,7 +247,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -256,7 +256,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), }, .driver_data = &quirk_dell_vostro_v130, }, -- cgit v1.1 From a4f46bb9fa84642e356898ee44b670989622f8bb Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 6 Aug 2012 18:15:37 -0500 Subject: thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR In the latest V-series bios DMI_PRODUCT_VERSION does not contain the string Lenovo or Thinkpad, but is set to the model number, this causes the thinkpad_acpi module to fail to load. Recognize laptop as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo. Test on V490u ============= == After the patch == [ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown [ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX [ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled [ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1350.307082] Registered led device: tpacpi::thinklight [ 1350.307215] Registered led device: tpacpi::power [ 1350.307255] Registered led device: tpacpi::standby [ 1350.307294] Registered led device: tpacpi::thinkvantage [ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14 == Before the patch == sudo modprobe thinkpad_acpi FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device Test on B485 ============= This patch was also test in a B485 where the thinkpad_acpi module does not have any issues loading. But, I tested it to make sure this patch does not break on already functioning models of Lenovo products. [13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/ [13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown [13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01 [13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [13486.752883] Registered led device: tpacpi::thinklight [13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15 Signed-off-by: Manoj Iyer Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index f28f36c..80e3779 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8664,6 +8664,13 @@ static int __must_check __init get_thinkpad_model_data( tp->model_str = kstrdup(s, GFP_KERNEL); if (!tp->model_str) return -ENOMEM; + } else { + s = dmi_get_system_info(DMI_BIOS_VENDOR); + if (s && !(strnicmp(s, "Lenovo", 6))) { + tp->model_str = kstrdup(s, GFP_KERNEL); + if (!tp->model_str) + return -ENOMEM; + } } s = dmi_get_system_info(DMI_PRODUCT_NAME); -- cgit v1.1 From ad20c73b05ea40cfdb42758506fb6b6befa3c9e5 Mon Sep 17 00:00:00 2001 From: Carlos Alberto Lopez Perez Date: Thu, 2 Aug 2012 19:50:21 +0200 Subject: classmate-laptop: always call input_sync() after input_report_switch() Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2 evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. So in order to read the tablet sensor data as it happens we need to ensure that we always call input_sync() after input_report_switch() Signed-off-by: Carlos Alberto Lopez Perez Signed-off-by: Matthew Garrett --- drivers/platform/x86/classmate-laptop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index cd33add..c87ff16 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -725,8 +725,10 @@ static void cmpc_tablet_handler(struct acpi_device *dev, u32 event) struct input_dev *inputdev = dev_get_drvdata(&dev->dev); if (event == 0x81) { - if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } } @@ -739,8 +741,10 @@ static void cmpc_tablet_idev_init(struct input_dev *inputdev) set_bit(SW_TABLET_MODE, inputdev->swbit); acpi = to_acpi_device(inputdev->dev.parent); - if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } static int cmpc_tablet_add(struct acpi_device *acpi) @@ -760,8 +764,10 @@ static int cmpc_tablet_resume(struct device *dev) struct input_dev *inputdev = dev_get_drvdata(dev); unsigned long long val = 0; - if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } return 0; } #endif -- cgit v1.1 From 296f9fe05d916e3d791dcd166aa41c1dadca4735 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:07:50 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 1) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 1 for special button handling. Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/ideapad-laptop.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 17f6dfd..2396242 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -65,6 +65,7 @@ enum { VPCCMD_R_ODD, /* 0x21 */ VPCCMD_R_RF = 0x23, VPCCMD_W_RF, + VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -518,9 +519,13 @@ static void ideapad_platform_exit(struct ideapad_private *priv) */ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 7, { KEY_CAMERA } }, + { KE_KEY, 11, { KEY_F16 } }, { KE_KEY, 13, { KEY_WLAN } }, { KE_KEY, 16, { KEY_PROG1 } }, { KE_KEY, 17, { KEY_PROG2 } }, + { KE_KEY, 64, { KEY_PROG3 } }, + { KE_KEY, 65, { KEY_PROG4 } }, { KE_END, 0 }, }; @@ -587,6 +592,28 @@ static void ideapad_input_novokey(struct ideapad_private *priv) ideapad_input_report(priv, 16); } +static void ideapad_check_special_buttons(struct ideapad_private *priv) +{ + unsigned long bit, value; + + read_ec_data(ideapad_handle, VPCCMD_R_SPECIAL_BUTTONS, &value); + + for (bit = 0; bit < 16; bit++) { + if (test_bit(bit, &value)) { + switch (bit) { + case 6: + /* Thermal Management button */ + ideapad_input_report(priv, 65); + break; + case 1: + /* OneKey Theater button */ + ideapad_input_report(priv, 64); + break; + } + } + } +} + /* * backlight */ @@ -785,6 +812,8 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) ideapad_sync_rfk_state(priv); break; case 13: + case 11: + case 7: case 6: ideapad_input_report(priv, vpc_bit); break; @@ -797,6 +826,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 2: ideapad_backlight_notify_power(priv); break; + case 0: + ideapad_check_special_buttons(priv); + break; default: pr_info("Unknown event: %lu\n", vpc_bit); } -- cgit v1.1 From 07a4a4fc83dd95bc7eb842cf9510ddcb45691a88 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:00 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 2) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 2 for touchpad toggle Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/ideapad-laptop.c | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 637074d..c86bae8 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -289,6 +289,7 @@ config IDEAPAD_LAPTOP tristate "Lenovo IdeaPad Laptop Extras" depends on ACPI depends on RFKILL && INPUT + depends on SERIO_I8042 select INPUT_SPARSEKMAP help This is a driver for the rfkill switches on Lenovo IdeaPad netbooks. diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 2396242..7bc1b6c 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -36,6 +36,7 @@ #include #include #include +#include #define IDEAPAD_RFKILL_DEV_NUM (3) @@ -526,6 +527,8 @@ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 17, { KEY_PROG2 } }, { KE_KEY, 64, { KEY_PROG3 } }, { KE_KEY, 65, { KEY_PROG4 } }, + { KE_KEY, 66, { KEY_TOUCHPAD_OFF } }, + { KE_KEY, 67, { KEY_TOUCHPAD_ON } }, { KE_END, 0 }, }; @@ -718,6 +721,24 @@ static const struct acpi_device_id ideapad_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); +static void ideapad_sync_touchpad_state(struct acpi_device *adevice) +{ + struct ideapad_private *priv = dev_get_drvdata(&adevice->dev); + unsigned long value; + + /* Without reading from EC touchpad LED doesn't switch state */ + if (!read_ec_data(adevice->handle, VPCCMD_R_TOUCHPAD, &value)) { + /* Some IdeaPads don't really turn off touchpad - they only + * switch the LED state. We (de)activate KBC AUX port to turn + * touchpad off and on. We send KEY_TOUCHPAD_OFF and + * KEY_TOUCHPAD_ON to not to get out of sync with LED */ + unsigned char param; + i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : + I8042_CMD_AUX_DISABLE); + ideapad_input_report(priv, value ? 67 : 66); + } +} + static int __devinit ideapad_acpi_add(struct acpi_device *adevice) { int ret, i; @@ -754,6 +775,7 @@ static int __devinit ideapad_acpi_add(struct acpi_device *adevice) priv->rfk[i] = NULL; } ideapad_sync_rfk_state(priv); + ideapad_sync_touchpad_state(adevice); if (!acpi_video_backlight_support()) { ret = ideapad_backlight_init(priv); @@ -817,6 +839,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 6: ideapad_input_report(priv, vpc_bit); break; + case 5: + ideapad_sync_touchpad_state(adevice); + break; case 4: ideapad_backlight_notify_brightness(priv); break; @@ -836,6 +861,15 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) } } +static int ideapad_acpi_resume(struct device *device) +{ + ideapad_sync_rfk_state(ideapad_priv); + ideapad_sync_touchpad_state(to_acpi_device(device)); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); + static struct acpi_driver ideapad_acpi_driver = { .name = "ideapad_acpi", .class = "IdeaPad", @@ -843,6 +877,7 @@ static struct acpi_driver ideapad_acpi_driver = { .ops.add = ideapad_acpi_add, .ops.remove = ideapad_acpi_remove, .ops.notify = ideapad_acpi_notify, + .drv.pm = &ideapad_pm, .owner = THIS_MODULE, }; -- cgit v1.1 From 0c7bbeb9f1373cea9e8efb43221118be2102a01c Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:11 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 3) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is the part 3 for fan control Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- .../ABI/testing/sysfs-platform-ideapad-laptop | 11 ++++++ drivers/platform/x86/ideapad-laptop.c | 43 ++++++++++++++++++++-- 2 files changed, 51 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 814b013..b31e782 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -5,4 +5,15 @@ Contact: "Ike Panhc " Description: Control the power of camera module. 1 means on, 0 means off. +What: /sys/devices/platform/ideapad/fan_mode +Date: June 2012 +KernelVersion: 3.6 +Contact: "Maxim Mikityanskiy " +Description: + Change fan mode + There are four available modes: + * 0 -> Super Silent Mode + * 1 -> Standard Mode + * 2 -> Dust Cleaning + * 4 -> Efficient Thermal Dissipation Mode diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 7bc1b6c..dae7abe 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -64,8 +64,10 @@ enum { VPCCMD_R_3G, VPCCMD_W_3G, VPCCMD_R_ODD, /* 0x21 */ - VPCCMD_R_RF = 0x23, + VPCCMD_W_FAN, + VPCCMD_R_RF, VPCCMD_W_RF, + VPCCMD_R_FAN = 0x2B, VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -358,14 +360,46 @@ static ssize_t store_ideapad_cam(struct device *dev, return -EINVAL; ret = write_ec_cmd(ideapad_handle, VPCCMD_W_CAMERA, state); if (ret < 0) - return ret; + return -EIO; return count; } static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam); +static ssize_t show_ideapad_fan(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long result; + + if (read_ec_data(ideapad_handle, VPCCMD_R_FAN, &result)) + return sprintf(buf, "-1\n"); + return sprintf(buf, "%lu\n", result); +} + +static ssize_t store_ideapad_fan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret, state; + + if (!count) + return 0; + if (sscanf(buf, "%i", &state) != 1) + return -EINVAL; + if (state < 0 || state > 4 || state == 3) + return -EINVAL; + ret = write_ec_cmd(ideapad_handle, VPCCMD_W_FAN, state); + if (ret < 0) + return -EIO; + return count; +} + +static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan); + static struct attribute *ideapad_attributes[] = { &dev_attr_camera_power.attr, + &dev_attr_fan_mode.attr, NULL }; @@ -379,7 +413,10 @@ static umode_t ideapad_is_visible(struct kobject *kobj, if (attr == &dev_attr_camera_power.attr) supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg)); - else + else if (attr == &dev_attr_fan_mode.attr) { + unsigned long value; + supported = !read_ec_data(ideapad_handle, VPCCMD_R_FAN, &value); + } else supported = true; return supported ? attr->mode : 0; -- cgit v1.1