From a96a27f97f2bbfc1fca54bc3c0b0d41484152740 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Oct 2008 23:48:56 -0700 Subject: iwlwifi: run through spell checker Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 6 ++--- drivers/net/wireless/iwlwifi/iwl-3945-io.h | 2 +- drivers/net/wireless/iwlwifi/iwl-3945.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 12 +++++----- drivers/net/wireless/iwlwifi/iwl-4965.c | 10 ++++----- drivers/net/wireless/iwlwifi/iwl-5000-hw.h | 2 +- drivers/net/wireless/iwlwifi/iwl-5000.c | 10 ++++----- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 2 +- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl-commands.h | 28 ++++++++++++------------ drivers/net/wireless/iwlwifi/iwl-core.c | 2 +- drivers/net/wireless/iwlwifi/iwl-core.h | 2 +- drivers/net/wireless/iwlwifi/iwl-debug.h | 7 +++--- drivers/net/wireless/iwlwifi/iwl-dev.h | 4 ++-- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 2 +- drivers/net/wireless/iwlwifi/iwl-io.h | 2 +- drivers/net/wireless/iwlwifi/iwl-led.c | 2 +- drivers/net/wireless/iwlwifi/iwl-power.c | 18 +++++++-------- drivers/net/wireless/iwlwifi/iwl-prph.h | 6 ++--- drivers/net/wireless/iwlwifi/iwl-rfkill.c | 8 +++---- drivers/net/wireless/iwlwifi/iwl-rx.c | 8 +++---- drivers/net/wireless/iwlwifi/iwl-scan.c | 2 +- drivers/net/wireless/iwlwifi/iwl-sta.c | 6 ++--- drivers/net/wireless/iwlwifi/iwl-tx.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 28 ++++++++++++------------ 26 files changed, 91 insertions(+), 92 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h index 817ece7..8772d9d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h @@ -121,7 +121,7 @@ enum { REPLY_TX_PWR_TABLE_CMD = 0x97, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - /* Bluetooth device coexistance config command */ + /* Bluetooth device coexistence config command */ REPLY_BT_CONFIG = 0x9b, /* Statistics */ @@ -158,7 +158,7 @@ struct iwl3945_cmd_header { u8 cmd; /* Command ID: REPLY_RXON, etc. */ u8 flags; /* IWL_CMD_* */ /* - * The driver sets up the sequence number to values of its chosing. + * The driver sets up the sequence number to values of its choosing. * uCode does not use this value, but passes it back to the driver * when sending the response to each driver-originated command, so * the driver can match the response to the command. Since the values @@ -991,7 +991,7 @@ struct iwl3945_rate_scaling_cmd { * * 3945 and 4965 support hardware handshake with Bluetooth device on * same platform. Bluetooth device alerts wireless device when it will Tx; - * wireless device can delay or kill its own Tx to accomodate. + * wireless device can delay or kill its own Tx to accommodate. */ struct iwl3945_bt_cmd { u8 flags; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-io.h b/drivers/net/wireless/iwlwifi/iwl-3945-io.h index b3fe48d..1daa3f0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-io.h @@ -53,7 +53,7 @@ * _iwl3945_read32.) * * These declarations are *extremely* useful in quickly isolating code deltas - * which result in misconfiguring of the hardware I/O. In combination with + * which result in misconfiguration of the hardware I/O. In combination with * git-bisect and the IO debug level you can quickly determine the specific * commit which breaks the IO sequence to the hardware. * diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 7afafb6..af77ea7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -200,7 +200,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp) * priv->eeprom is used to determine if antenna AUX/MAIN are reversed * priv->antenna specifies the antenna diversity mode: * - * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself + * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself * IWL_ANTENNA_MAIN - Force MAIN antenna * IWL_ANTENNA_AUX - Force AUX antenna */ @@ -1882,7 +1882,7 @@ static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv) ref_temp = (s16)priv->eeprom.groups[ch_info->group_index]. temperature; - /* get power index adjustment based on curr and factory + /* get power index adjustment based on current and factory * temps */ delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, ref_temp); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index f3f41a6..9da7c7b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -71,7 +71,7 @@ #include "iwl-fh.h" -/* EERPROM */ +/* EEPROM */ #define IWL4965_EEPROM_IMG_SIZE 1024 /* @@ -286,13 +286,13 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * that target txpower. * * - * 3) Determine (EEPROM) calibration subband for the target channel, by - * comparing against first and last channels in each subband + * 3) Determine (EEPROM) calibration sub band for the target channel, by + * comparing against first and last channels in each sub band * (see struct iwl4965_eeprom_calib_subband_info). * * * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, - * referencing the 2 factory-measured (sample) channels within the subband. + * referencing the 2 factory-measured (sample) channels within the sub band. * * Interpolation is based on difference between target channel's frequency * and the sample channels' frequencies. Since channel numbers are based @@ -300,7 +300,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * to interpolating based on channel number differences. * * Note that the sample channels may or may not be the channels at the - * edges of the subband. The target channel may be "outside" of the + * edges of the sub band. The target channel may be "outside" of the * span of the sampled channels. * * Driver may choose the pair (for 2 Tx chains) of measurements (see @@ -344,7 +344,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * "4965 temperature calculation". * * If current temperature is higher than factory temperature, driver must - * increase gain (lower gain table index), and vice versa. + * increase gain (lower gain table index), and vice verse. * * Temperature affects gain differently for different channels: * diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 1f22140..0953a9c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -246,7 +246,7 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, priv->ucode_data.len); - /* Inst bytecount must be last to set up, bit 31 signals uCode + /* Inst byte count must be last to set up, bit 31 signals uCode * that all new ptr/size info is in place */ iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, priv->ucode_code.len | BSM_DRAM_INST_LOAD); @@ -324,7 +324,7 @@ static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv) } /* - * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask + * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask * must be called under priv->lock and mac access */ static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask) @@ -396,7 +396,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv) /* L1 is enabled by BIOS */ if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) - /* diable L0S disabled L1A enabled */ + /* disable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else /* L0S enabled L1A disabled */ @@ -625,7 +625,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work) mutex_lock(&priv->mutex); - /* Regardless of if we are assocaited, we must reconfigure the + /* Regardless of if we are associated, we must reconfigure the * TX power since frames can be sent on non-radar channels while * not associated */ iwl4965_send_tx_power(priv); @@ -2019,7 +2019,7 @@ static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) } /** - * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue + * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue */ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, struct iwl_ht_agg *agg, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 49ede54..12c7404 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -73,7 +73,7 @@ #define IWL50_RTC_INST_SIZE (IWL50_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) #define IWL50_RTC_DATA_SIZE (IWL50_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) -/* EERPROM */ +/* EEPROM */ #define IWL_5000_EEPROM_IMG_SIZE 2048 #define IWL50_CMD_FIFO_NUM 7 diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 0c9281e..4348c7d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -94,7 +94,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv) iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); - /* Set FH wait treshold to maximum (HW error during stress W/A) */ + /* Set FH wait threshold to maximum (HW error during stress W/A) */ iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); /* enable HAP INTA to move device L1a -> L0s */ @@ -134,7 +134,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv) return ret; } -/* FIXME: this is indentical to 4965 */ +/* FIXME: this is identical to 4965 */ static void iwl5000_apm_stop(struct iwl_priv *priv) { unsigned long flags; @@ -219,7 +219,7 @@ static void iwl5000_nic_config(struct iwl_priv *priv) /* L1 is enabled by BIOS */ if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) - /* diable L0S disabled L1A enabled */ + /* disable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else /* L0S enabled L1A disabled */ @@ -1093,7 +1093,7 @@ static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) /* - * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask + * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask * must be called under priv->lock and mac access */ static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask) @@ -1311,7 +1311,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); } -/* Currently 5000 is the supperset of everything */ +/* Currently 5000 is the superset of everything */ static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len) { return len; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 6fdb2fb..f5e94b6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -188,7 +188,7 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits * "G" is the only table that supports CCK (the first 4 rates). */ -/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ +/*FIXME:RS:need to separate tables for MIMO2/MIMO3*/ static s32 expected_tpt_A[IWL_RATE_COUNT] = { 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 }; @@ -2253,7 +2253,7 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, lq_sta->active_mimo2_rate, lq_sta->active_mimo3_rate); - /* These values will be overriden later */ + /* These values will be overridden later */ lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h index bac91f1..ccfafcf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -229,7 +229,7 @@ enum { #define IWL_MIMO2_SWITCH_SISO_C 4 #define IWL_MIMO2_SWITCH_GI 5 -/*FIXME:RS:add posible acctions for MIMO3*/ +/*FIXME:RS:add possible actions for MIMO3*/ #define IWL_ACTION_LIMIT 3 /* # possible actions */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 7c3eb3d..7a7caac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1484,7 +1484,7 @@ static void iwl4965_enable_interrupts(struct iwl_priv *priv) /* call this function to flush any scheduled tasklet */ static inline void iwl_synchronize_irq(struct iwl_priv *priv) { - /* wait to make sure we flush pedding tasklet*/ + /* wait to make sure we flush pending tasklet*/ synchronize_irq(priv->pci_dev->irq); tasklet_kill(&priv->irq_tasklet); } diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 56964ee..5ab74fc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -134,7 +134,7 @@ enum { REPLY_TX_POWER_DBM_CMD = 0x98, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - /* Bluetooth device coexistance config command */ + /* Bluetooth device coexistence config command */ REPLY_BT_CONFIG = 0x9b, /* Statistics */ @@ -185,7 +185,7 @@ struct iwl_cmd_header { u8 cmd; /* Command ID: REPLY_RXON, etc. */ u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ /* - * The driver sets up the sequence number to values of its chosing. + * The driver sets up the sequence number to values of its choosing. * uCode does not use this value, but passes it back to the driver * when sending the response to each driver-originated command, so * the driver can match the response to the command. Since the values @@ -347,7 +347,7 @@ struct iwl4965_tx_power_db { } __attribute__ ((packed)); /** - * Commad REPLY_TX_POWER_DBM_CMD = 0x98 + * Command REPLY_TX_POWER_DBM_CMD = 0x98 * struct iwl5000_tx_power_dbm_cmd */ #define IWL50_TX_POWER_AUTO 0x7f @@ -383,7 +383,7 @@ struct iwl5000_tx_power_dbm_cmd { * calculating txpower settings: * * 1) Power supply voltage indication. The voltage sensor outputs higher - * values for lower voltage, and vice versa. + * values for lower voltage, and vice verse. * * 2) Temperature measurement parameters, for each of two channel widths * (20 MHz and 40 MHz) supported by the radios. Temperature sensing @@ -622,7 +622,7 @@ struct iwl4965_rxon_cmd { u8 ofdm_ht_dual_stream_basic_rates; } __attribute__ ((packed)); -/* 5000 HW just extend this cmmand */ +/* 5000 HW just extend this command */ struct iwl_rxon_cmd { u8 node_addr[6]; __le16 reserved1; @@ -1113,7 +1113,7 @@ struct iwl4965_rx_non_cfg_phy { #define IWL50_OFDM_RSSI_C_BIT_POS 0 struct iwl5000_non_cfg_phy { - __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */ + __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* up to 8 phy entries */ } __attribute__ ((packed)); @@ -1169,7 +1169,7 @@ struct iwl4965_rx_mpdu_res_start { /* REPLY_TX Tx flags field */ -/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it +/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it * before this frame. if CTS-to-self required check * RXON_FLG_SELF_CTS_EN status. */ #define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0) @@ -1529,7 +1529,7 @@ struct iwl4965_tx_resp { /* * definitions for initial rate index field - * bits [3:0] inital rate index + * bits [3:0] initial rate index * bits [6:4] rate table color, used for the initial rate * bit-7 invalid rate indication * i.e. rate was not chosen from rate table @@ -1768,7 +1768,7 @@ struct iwl_link_qual_agg_params { * match the modulation characteristics of the history set. * * When using block-ack (aggregation), all frames are transmitted at the same - * rate, since there is no per-attempt acknowledgement from the destination + * rate, since there is no per-attempt acknowledgment from the destination * station. The Tx response struct iwl_tx_resp indicates the Tx rate in * rate_n_flags field. After receiving a block-ack, the driver can update * history for the entire block all at once. @@ -1907,7 +1907,7 @@ struct iwl_link_quality_cmd { * * 3945 and 4965 support hardware handshake with Bluetooth device on * same platform. Bluetooth device alerts wireless device when it will Tx; - * wireless device can delay or kill its own Tx to accomodate. + * wireless device can delay or kill its own Tx to accommodate. */ struct iwl4965_bt_cmd { u8 flags; @@ -2069,7 +2069,7 @@ struct iwl4965_spectrum_notification { * '11' Illegal set * * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then - * ucode assume sleep over DTIM is allowed and we don't need to wakeup + * ucode assume sleep over DTIM is allowed and we don't need to wake up * for every DTIM. */ #define IWL_POWER_VEC_SIZE 5 @@ -3017,11 +3017,11 @@ struct iwl_wimax_coex_event_entry { /* COEX flag masks */ -/* Staion table is valid */ +/* Station table is valid */ #define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1) -/* UnMask wakeup src at unassociated sleep */ +/* UnMask wake up src at unassociated sleep */ #define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4) -/* UnMask wakeup src at associated sleep */ +/* UnMask wake up src at associated sleep */ #define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8) /* Enable CoEx feature. */ #define COEX_FLAGS_COEX_ENABLE_MSK (0x80) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a7cb40b..8eb0203 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -747,7 +747,7 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) break; case WLAN_HT_CAP_SM_PS_INVALID: default: - IWL_ERROR("invalide mimo ps mode %d\n", + IWL_ERROR("invalid mimo ps mode %d\n", priv->current_ht_config.sm_ps); WARN_ON(1); idle_cnt = -1; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index fb95c6a..10f07f6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -100,7 +100,7 @@ struct iwl_hcmd_utils_ops { }; struct iwl_lib_ops { - /* set hw dependant perameters */ + /* set hw dependent parameters */ int (*set_hw_params)(struct iwl_priv *priv); /* ucode shared memory */ int (*alloc_shared_mem)(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 2b48a4c..84b7772 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -101,13 +101,12 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) * * To add your debug level to the list of levels seen when you perform * - * % cat /proc/net/iwl/debug_level + * % cat /sys/class/net/wlanX/device/debug_level * * you simply need to add your entry to the iwl_debug_levels array. * - * If you do not see debug_level in /proc/net/iwl then you do not have - * CONFIG_IWLWIFI_DEBUG defined in your kernel configuration - * + * If you do not see debug_level in /sys/class/net/wlanX/device/debug_level + * then you do not have CONFIG_IWLWIFI_DEBUG defined in your kernel config file */ #define IWL_DL_INFO (1 << 0) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index f546b7e..b58fcde 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -518,7 +518,7 @@ struct iwl_sensitivity_ranges { * @sw_crypto: 0 for hw, 1 for sw * @max_xxx_size: for ucode uses * @ct_kill_threshold: temperature threshold - * @calib_init_cfg: setup initial claibrations for the hw + * @calib_init_cfg: setup initial calibrations for the hw * @struct iwl_sensitivity_ranges: range of sensitivity values */ struct iwl_hw_params { @@ -911,7 +911,7 @@ struct iwl_priv { unsigned long status; - int last_rx_rssi; /* From Rx packet statisitics */ + int last_rx_rssi; /* From Rx packet statistics */ int last_rx_noise; /* From beacon statistics */ /* counts mgmt, ctl, and data packets */ diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 5160b4b..792a3c1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -291,7 +291,7 @@ int iwl_eeprom_check_version(struct iwl_priv *priv) return 0; err: - IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + IWL_ERROR("Unsupported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", eeprom_ver, priv->cfg->eeprom_ver, calib_ver, priv->cfg->eeprom_calib_ver); return -EINVAL; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 9740fcc..40e0050 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -55,7 +55,7 @@ * _iwl_read32.) * * These declarations are *extremely* useful in quickly isolating code deltas - * which result in misconfiguring of the hardware I/O. In combination with + * which result in misconfiguration of the hardware I/O. In combination with * git-bisect and the IO debug level you can quickly determine the specific * commit which breaks the IO sequence to the hardware. * diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 4eee1b1..ffb428a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -278,7 +278,7 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) /* FIXME: + priv->rx_stats[2].bytes; */ s64 tpt = current_tpt - priv->led_tpt; - if (tpt < 0) /* wrapparound */ + if (tpt < 0) /* wraparound */ tpt = -tpt; IWL_DEBUG_LED("tpt %lld current_tpt %llu\n", diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 60a03d2..07a5f60 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -80,7 +80,7 @@ #define IWL_REDUCED_POWER_TEMPERATURE 95 /* default power management (not Tx power) table values */ -/* for tim 0-10 */ +/* for TIM 0-10 */ static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, @@ -91,7 +91,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = { }; -/* for tim = 3-10 */ +/* for TIM = 3-10 */ static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, @@ -101,7 +101,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = { {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2} }; -/* for tim > 11 */ +/* for TIM > 11 */ static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, @@ -183,7 +183,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) return 0; } -/* adjust power command according to dtim period and power level*/ +/* adjust power command according to DTIM period and power level*/ static int iwl_update_power_command(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, u16 mode) @@ -325,7 +325,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force) EXPORT_SYMBOL(iwl_power_update_mode); /* Allow other iwl code to disable/enable power management active - * this will be usefull for rate scale to disable PM during heavy + * this will be useful for rate scale to disable PM during heavy * Tx/Rx activities */ int iwl_power_disable_management(struct iwl_priv *priv, u32 ms) @@ -352,8 +352,8 @@ int iwl_power_disable_management(struct iwl_priv *priv, u32 ms) EXPORT_SYMBOL(iwl_power_disable_management); /* Allow other iwl code to disable/enable power management active - * this will be usefull for rate scale to disable PM during hight - * valume activities + * this will be useful for rate scale to disable PM during high + * volume activities */ int iwl_power_enable_management(struct iwl_priv *priv) { @@ -391,7 +391,7 @@ int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode) } EXPORT_SYMBOL(iwl_power_set_system_mode); -/* initilize to default */ +/* initialize to default */ void iwl_power_initialize(struct iwl_priv *priv) { @@ -443,7 +443,7 @@ static void iwl_bg_set_power_save(struct work_struct *work) mutex_lock(&priv->mutex); - /* on starting association we disable power managment + /* on starting association we disable power management * until association, if association failed then this * timer will expire and enable PM again. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index ee5afd4..b0ffb89 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -158,9 +158,9 @@ * * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction * images in host DRAM. The last register loaded must be the instruction - * bytecount register ("1" in MSbit tells initialization uCode to load + * byte count register ("1" in MSbit tells initialization uCode to load * the runtime uCode): - * BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD + * BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD * * 5) Wait for "alive" notification, then issue normal runtime commands. * @@ -244,7 +244,7 @@ /** * Tx Scheduler * - * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs + * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in * host DRAM. It steers each frame's Tx command (which contains the frame * data) into one of up to 7 prioritized Tx DMA FIFO channels within the diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 5d64229..618841a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -64,7 +64,7 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) iwl_radio_kill_sw_disable_radio(priv); break; default: - IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); + IWL_WARNING("we received unexpected RFKILL state %d\n", state); break; } out_unlock: @@ -83,7 +83,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) IWL_DEBUG_RF_KILL("Initializing RFKILL.\n"); priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); if (!priv->rfkill) { - IWL_ERROR("Unable to allocate rfkill device.\n"); + IWL_ERROR("Unable to allocate RFKILL device.\n"); ret = -ENOMEM; goto error; } @@ -99,7 +99,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) ret = rfkill_register(priv->rfkill); if (ret) { - IWL_ERROR("Unable to register rfkill: %d\n", ret); + IWL_ERROR("Unable to register RFKILL: %d\n", ret); goto free_rfkill; } @@ -127,7 +127,7 @@ void iwl_rfkill_unregister(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_rfkill_unregister); -/* set rf-kill to the right state. */ +/* set RFKILL to the right state. */ void iwl_rfkill_set_hw_state(struct iwl_priv *priv) { if (!priv->rfkill) diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 7cde9d7..b86f958 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -407,7 +407,7 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) (priv->shared_phys + priv->rb_closed_offset) >> 4); /* Enable Rx DMA - * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in + * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in * the credit mechanism in 5000 HW RX FIFO * Direct rx interrupts to hosts * Rx buffer size 4 or 8k @@ -1149,7 +1149,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; /* Set "1" to report good data frames in groups of 100 */ - /* FIXME: need to optimze the call: */ + /* FIXME: need to optimize the call: */ iwl_dbg_report_frame(priv, pkt, header, 1); IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n", @@ -1160,12 +1160,12 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, * "antenna number" * * It seems that the antenna field in the phy flags value - * is actually a bitfield. This is undefined by radiotap, + * is actually a bit field. This is undefined by radiotap, * it wants an actual antenna number but I always get "7" * for most legacy frames I receive indicating that the * same frame was received on all three RX chains. * - * I think this field should be removed in favour of a + * I think this field should be removed in favor of a * new 802.11n radiotap field "RX chains" that is defined * as a bitmask. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index b0abf89..6c5654f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -654,7 +654,7 @@ static void iwl_bg_request_scan(struct work_struct *data) goto done; } - /* Make sure the scan wasn't cancelled before this queued work + /* Make sure the scan wasn't canceled before this queued work * was given the chance to run... */ if (!test_bit(STATUS_SCANNING, &priv->status)) goto done; diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index dde0850..bfc009c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -693,7 +693,7 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ - /* This copy is acutally not needed: we get the key with each TX */ + /* This copy is actually not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, 16); @@ -788,7 +788,7 @@ static void iwl_dump_lq_cmd(struct iwl_priv *priv, { int i; IWL_DEBUG_RATE("lq station id 0x%x\n", lq->sta_id); - IWL_DEBUG_RATE("lq dta 0x%X 0x%X\n", + IWL_DEBUG_RATE("lq ant 0x%X 0x%X\n", lq->general_params.single_stream_ant_msk, lq->general_params.dual_stream_ant_msk); @@ -890,7 +890,7 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) * iwl_rxon_add_station - add station into station table. * * there is only one AP station with id= IWL_AP_ID - * NOTE: mutex must be held before calling this fnction + * NOTE: mutex must be held before calling this function */ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) { diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index cfa7826..6008c0c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -524,7 +524,7 @@ EXPORT_SYMBOL(iwl_hw_txq_ctx_free); /** * iwl_txq_ctx_reset - Reset TX queue context - * Destroys all DMA structures and initialise them again + * Destroys all DMA structures and initialize them again * * @param priv * @return error code @@ -764,7 +764,7 @@ static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv, memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); if (info->flags & IEEE80211_TX_CTL_AMPDU) tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n"); + IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n"); break; case ALG_TKIP: diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8009094..a4d9247 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1805,7 +1805,7 @@ static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force) spin_unlock_irqrestore(&priv->lock, flags); if (force || iwl3945_is_associated(priv)) { - IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n", + IWL_DEBUG_QOS("send QoS cmd with QoS active %d \n", priv->qos_data.qos_active); iwl3945_send_qos_params_command(priv, @@ -1829,7 +1829,7 @@ static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force) /* default power management (not Tx power) table values */ -/* for tim 0-10 */ +/* for TIM 0-10 */ static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = { {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, @@ -1839,7 +1839,7 @@ static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = { {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1} }; -/* for tim > 10 */ +/* for TIM > 10 */ static struct iwl3945_power_vec_entry range_1[IWL_POWER_AC] = { {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), @@ -2282,7 +2282,7 @@ static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode) iwl3945_clear_stations_table(priv); - /* dont commit rxon if rf-kill is on*/ + /* don't commit rxon if rf-kill is on*/ if (!iwl3945_is_ready_rf(priv)) return -EAGAIN; @@ -2311,7 +2311,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, case ALG_CCMP: cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM; memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen); - IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n"); + IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n"); break; case ALG_TKIP: @@ -4002,7 +4002,7 @@ static void iwl3945_enable_interrupts(struct iwl3945_priv *priv) /* call this function to flush any scheduled tasklet */ static inline void iwl_synchronize_irq(struct iwl3945_priv *priv) { - /* wait to make sure we flush pedding tasklet*/ + /* wait to make sure we flush pending tasklet*/ synchronize_irq(priv->pci_dev->irq); tasklet_kill(&priv->irq_tasklet); } @@ -5559,7 +5559,7 @@ static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv) iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, priv->ucode_data.len); - /* Inst bytecount must be last to set up, bit 31 signals uCode + /* Inst byte count must be last to set up, bit 31 signals uCode * that all new ptr/size info is in place */ iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, priv->ucode_code.len | BSM_DRAM_INST_LOAD); @@ -5651,7 +5651,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) rc = iwl3945_grab_nic_access(priv); if (rc) { - IWL_WARNING("Can not read rfkill status from adapter\n"); + IWL_WARNING("Can not read RFKILL status from adapter\n"); return; } @@ -5661,7 +5661,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) if (rfkill & 0x1) { clear_bit(STATUS_RF_KILL_HW, &priv->status); - /* if rfkill is not on, then wait for thermal + /* if RFKILL is not on, then wait for thermal * sensor in adapter to kick in */ while (iwl3945_hw_get_temperature(priv) == 0) { thermal_spin++; @@ -5855,7 +5855,7 @@ static int __iwl3945_up(struct iwl3945_priv *priv) } if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERROR("ucode not available for device bringup\n"); + IWL_ERROR("ucode not available for device bring up\n"); return -EIO; } @@ -6065,7 +6065,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data) goto done; } - /* Make sure the scan wasn't cancelled before this queued work + /* Make sure the scan wasn't canceled before this queued work * was given the chance to run... */ if (!test_bit(STATUS_SCANNING, &priv->status)) goto done; @@ -7728,7 +7728,7 @@ static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); /***************************************************************************** * - * driver setup and teardown + * driver setup and tear down * *****************************************************************************/ @@ -8157,7 +8157,7 @@ static int iwl3945_rfkill_soft_rf_kill(void *data, enum rfkill_state state) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return 0; - IWL_DEBUG_RF_KILL("we recieved soft RFKILL set to state %d\n", state); + IWL_DEBUG_RF_KILL("we received soft RFKILL set to state %d\n", state); mutex_lock(&priv->mutex); switch (state) { @@ -8172,7 +8172,7 @@ static int iwl3945_rfkill_soft_rf_kill(void *data, enum rfkill_state state) iwl3945_radio_kill_sw(priv, 1); break; default: - IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); + IWL_WARNING("we received unexpected RFKILL state %d\n", state); break; } out_unlock: -- cgit v1.1