From 9b4a1617772d6d5ab5eeda0cd95302fae119e359 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Feb 2006 10:48:10 +0000 Subject: [SERIAL] uart_port iotype member should use UPIO_* Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King --- arch/mips/lasat/setup.c | 2 +- arch/mips/mips-boards/atlas/atlas_setup.c | 2 +- arch/mips/mips-boards/sead/sead_setup.c | 2 +- arch/mips/mips-boards/sim/sim_setup.c | 2 +- arch/mips/philips/pnx8550/common/platform.c | 4 ++-- arch/ppc/platforms/4xx/bamboo.c | 2 +- arch/ppc/platforms/4xx/bubinga.c | 2 +- arch/ppc/platforms/4xx/ebony.c | 2 +- arch/ppc/platforms/4xx/luan.c | 2 +- arch/ppc/platforms/4xx/ocotea.c | 2 +- arch/ppc/platforms/4xx/xilinx_ml300.c | 2 +- arch/ppc/platforms/4xx/yucca.c | 2 +- arch/ppc/platforms/83xx/mpc834x_sys.c | 4 ++-- arch/ppc/platforms/85xx/mpc8540_ads.c | 4 ++-- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 4 ++-- arch/ppc/platforms/85xx/sbc8560.c | 2 +- arch/ppc/platforms/85xx/tqm85xx.c | 4 ++-- arch/ppc/platforms/chestnut.c | 2 +- arch/ppc/platforms/ev64260.c | 2 +- arch/ppc/platforms/radstone_ppc7d.c | 2 +- arch/ppc/platforms/spruce.c | 2 +- arch/ppc/syslib/ppc83xx_setup.c | 2 +- arch/ppc/syslib/ppc85xx_setup.c | 2 +- drivers/serial/21285.c | 2 +- drivers/serial/amba-pl010.c | 4 ++-- drivers/serial/au1x00_uart.c | 12 ++++++------ drivers/serial/cpm_uart/cpm_uart_core.c | 12 ++++++------ drivers/serial/dz.c | 2 +- drivers/serial/imx.c | 4 ++-- drivers/serial/mux.c | 2 +- drivers/serial/pmac_zilog.c | 2 +- drivers/serial/sa1100.c | 2 +- drivers/serial/serial_lh7a40x.c | 6 +++--- drivers/serial/sh-sci.c | 10 +++++----- drivers/serial/sunsab.c | 2 +- drivers/serial/sunsu.c | 10 +++++----- drivers/serial/sunzilog.c | 4 ++-- drivers/serial/v850e_uart.c | 2 +- 38 files changed, 66 insertions(+), 66 deletions(-) diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index dcd819d..cefcf73 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -135,7 +135,7 @@ void __init serial_init(void) memset(&s, 0, sizeof(s)); s.flags = STD_COM_FLAGS; - s.iotype = SERIAL_IO_MEM; + s.iotype = UPIO_MEM; if (mips_machtype == MACH_LASAT_100) { s.uartclk = LASAT_BASE_BAUD_100 * 16; diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 625843b..2d4f309 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -83,7 +83,7 @@ static void __init serial_init(void) s.irq = ATLASINT_UART; s.uartclk = ATLAS_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = SERIAL_IO_PORT; + s.iotype = UPIO_PORT; s.regshift = 3; if (early_serial_setup(&s) != 0) { diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index f966bc1..a72ef29 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -72,7 +72,7 @@ static void __init serial_init(void) s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = 0; + s.iotype = UPIO_PORT; s.regshift = 3; if (early_serial_setup(&s) != 0) { diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c index 485d5a5..87a14a7 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -89,7 +89,7 @@ static void __init serial_init(void) s.irq = 0; s.uartclk = BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST; - s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST; + s.iotype = UPIO_PORT; s.regshift = 0; s.timeout = 4; diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index 8aa9bd6..35be6db 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -66,7 +66,7 @@ struct ip3106_port ip3106_ports[] = { [0] = { .port = { .type = PORT_IP3106, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void __iomem *)PNX8550_UART_PORT0, .mapbase = PNX8550_UART_PORT0, .irq = PNX8550_UART_INT(0), @@ -80,7 +80,7 @@ struct ip3106_port ip3106_ports[] = { [1] = { .port = { .type = PORT_IP3106, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void __iomem *)PNX8550_UART_PORT1, .mapbase = PNX8550_UART_PORT1, .irq = PNX8550_UART_INT(1), diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index 159b228..c371d54 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -332,7 +332,7 @@ bamboo_early_serial_map(void) port.irq = 0; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 8110f55..0fe8da1 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -97,7 +97,7 @@ bubinga_early_serial_map(void) port.irq = ACTING_UART0_INT; port.uartclk = uart_clock; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 64ebae1..352b76c 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -225,7 +225,7 @@ ebony_early_serial_map(void) port.irq = 0; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index d810b73..a94683a 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -279,7 +279,7 @@ luan_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 73b2c98..de916bb 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -248,7 +248,7 @@ ocotea_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index 0b1b77d..3f82022 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -95,7 +95,7 @@ ml300_early_serial_map(void) port.irq = old_ports[i].irq; port.uartclk = old_ports[i].baud_base * 16; port.regshift = old_ports[i].iomem_reg_shift; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = i; diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index e60f4bd..2b84fc6 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -305,7 +305,7 @@ yucca_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 012e1e6..1a659bb 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -301,14 +301,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500); p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600); p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 2eceb1e..408d64f 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -162,14 +162,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index b332eba..1801ab3 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -534,14 +534,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index e777ba8..8a72221 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -64,7 +64,7 @@ sbc8560_early_serial_map(void) uart_req.irq = MPC85xx_IRQ_EXT9; uart_req.flags = STD_COM_FLAGS; uart_req.uartclk = BASE_BAUD * 16; - uart_req.iotype = SERIAL_IO_MEM; + uart_req.iotype = UPIO_MEM; uart_req.mapbase = UARTA_ADDR; uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE); uart_req.type = PORT_16650; diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index b436f4d..a5e38ba 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -346,14 +346,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c index 48a4a51..aefcc0e 100644 --- a/arch/ppc/platforms/chestnut.c +++ b/arch/ppc/platforms/chestnut.c @@ -116,7 +116,7 @@ chestnut_early_serial_map(void) port.uartclk = BASE_BAUD * 16; port.irq = UART0_INT; port.flags = STD_COM_FLAGS | UPF_IOREMAP; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.mapbase = CHESTNUT_UART0_IO_BASE; port.regshift = 0; diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index 32358b3..ffde8f6 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -330,7 +330,7 @@ ev64260_early_serial_map(void) port.irq = EV64260_UART_0_IRQ; port.uartclk = BASE_BAUD * 16; port.regshift = 2; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = STD_COM_FLAGS; #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 708b873..872c0a3 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -100,7 +100,7 @@ static void __init ppc7d_early_serial_map(void) serial_req.uartclk = UART_CLK; serial_req.irq = 4; serial_req.flags = STD_COM_FLAGS; - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *) PPC7D_SERIAL_0; gen550_init(0, &serial_req); diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index 5ad70d3..510182e 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -177,7 +177,7 @@ spruce_early_serial_map(void) serial_req.uartclk = uart_clk; serial_req.irq = UART0_INT; serial_req.flags = ASYNC_BOOT_AUTOCONF; - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *)UART0_IO_BASE; serial_req.regshift = 0; diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 1b5fe9e..7bada82 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -108,7 +108,7 @@ mpc83xx_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.mapbase = pdata[0].mapbase; serial_req.membase = pdata[0].membase; serial_req.regshift = 0; diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 1a47ff4..e4dda43 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -90,7 +90,7 @@ mpc85xx_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.mapbase = pdata[0].mapbase; serial_req.membase = pdata[0].membase; serial_req.regshift = 0; diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 7aef751..8c5c276 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -362,7 +362,7 @@ static struct uart_ops serial21285_ops = { static struct uart_port serial21285_port = { .mapbase = 0x42000160, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = NO_IRQ, .fifosize = 16, .ops = &serial21285_ops, diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 429de27..321a3b3 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -561,7 +561,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .port = { .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE), .mapbase = INTEGRATOR_UART0_BASE, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UARTINT0, .uartclk = 14745600, .fifosize = 16, @@ -576,7 +576,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .port = { .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE), .mapbase = INTEGRATOR_UART1_BASE, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UARTINT1, .uartclk = 14745600, .fifosize = 16, diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c index ceb5d7f..344022fe 100644 --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -892,7 +892,7 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res int ret = 0; switch (up->port.iotype) { - case SERIAL_IO_MEM: + case UPIO_MEM: if (up->port.mapbase) { *res = request_mem_region(up->port.mapbase, size, "serial"); if (!*res) @@ -900,8 +900,8 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res } break; - case SERIAL_IO_HUB6: - case SERIAL_IO_PORT: + case UPIO_HUB6: + case UPIO_PORT: *res = request_region(up->port.iobase, size, "serial"); if (!*res) ret = -EBUSY; @@ -919,7 +919,7 @@ static void serial8250_release_port(struct uart_port *port) size <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_MEM: + case UPIO_MEM: if (up->port.mapbase) { /* * Unmap the area. @@ -935,8 +935,8 @@ static void serial8250_release_port(struct uart_port *port) } break; - case SERIAL_IO_HUB6: - case SERIAL_IO_PORT: + case UPIO_HUB6: + case UPIO_PORT: start = up->port.iobase; if (size) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 16af562..3d80846 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -908,7 +908,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SMC1_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .flags = FLAG_SMC, @@ -922,7 +922,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SMC2_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .flags = FLAG_SMC, @@ -939,7 +939,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC1_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -953,7 +953,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC2_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -967,7 +967,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC3_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -981,7 +981,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC4_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index a64ba26..5ff1e83 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -650,7 +650,7 @@ static void __init dz_init_ports(void) for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) { spin_lock_init(&dport->port.lock); dport->port.membase = (char *) base; - dport->port.iotype = SERIAL_IO_PORT; + dport->port.iotype = UPIO_PORT; dport->port.irq = dec_interrupt[DEC_IRQ_DZ11]; dport->port.line = i; dport->port.fifosize = 1; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 858048e..4d53fb5 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -668,7 +668,7 @@ static struct imx_port imx_ports[] = { .rtsirq = UART1_MINT_RTS, .port = { .type = PORT_IMX, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void *)IMX_UART1_BASE, .mapbase = IMX_UART1_BASE, /* FIXME */ .irq = UART1_MINT_RX, @@ -684,7 +684,7 @@ static struct imx_port imx_ports[] = { .rtsirq = UART2_MINT_RTS, .port = { .type = PORT_IMX, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void *)IMX_UART2_BASE, .mapbase = IMX_UART2_BASE, /* FIXME */ .irq = UART2_MINT_RX, diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 4e49168..868eaf4 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -462,7 +462,7 @@ static int __init mux_probe(struct parisc_device *dev) port->mapbase = dev->hpa.start + MUX_OFFSET + (i * MUX_LINE_OFFSET); port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); - port->iotype = SERIAL_IO_MEM; + port->iotype = UPIO_MEM; port->type = PORT_MUX; port->irq = NO_IRQ; port->uartclk = 0; diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 4e03a87..9b7ed58 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1492,7 +1492,7 @@ no_dma: /* * Init remaining bits of "port" structure */ - uap->port.iotype = SERIAL_IO_MEM; + uap->port.iotype = UPIO_MEM; uap->port.irq = np->intrs[0].line; uap->port.uartclk = ZS_CLOCK; uap->port.fifosize = 1; diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index ff7b60b..2c00b86 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -628,7 +628,7 @@ static void __init sa1100_init_ports(void) sa1100_ports[i].port.ops = &sa1100_pops; sa1100_ports[i].port.fifosize = 8; sa1100_ports[i].port.line = i; - sa1100_ports[i].port.iotype = SERIAL_IO_MEM; + sa1100_ports[i].port.iotype = UPIO_MEM; init_timer(&sa1100_ports[i].timer); sa1100_ports[i].timer.function = sa1100_timeout; sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index d0490f6..04186ea 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -501,7 +501,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART1_PHYS), .mapbase = UART1_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART1INTR, .uartclk = 14745600/2, .fifosize = 16, @@ -514,7 +514,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART2_PHYS), .mapbase = UART2_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART2INTR, .uartclk = 14745600/2, .fifosize = 16, @@ -527,7 +527,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART3_PHYS), .mapbase = UART3_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART3INTR, .uartclk = 14745600/2, .fifosize = 16, diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 80737c1..c903349 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1468,7 +1468,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff923000, .mapbase = 0xff923000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 61, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1482,7 +1482,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff924000, .mapbase = 0xff924000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 62, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1496,7 +1496,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff925000, .mapbase = 0xff925000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 63, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1511,7 +1511,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xffe00000, .mapbase = 0xffe00000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1525,7 +1525,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xffe10000, .mapbase = 0xffe10000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 79, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 8bcaebc..8566422 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1036,7 +1036,7 @@ static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg up->port.irq = edev->irqs[0]; up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; up->port.mapbase = (unsigned long)up->regs; - up->port.iotype = SERIAL_IO_MEM; + up->port.iotype = UPIO_MEM; writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index bc67442..3087045 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -109,11 +109,11 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) offset <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_HUB6: + case UPIO_HUB6: outb(up->port.hub6 - 1 + offset, up->port.iobase); return inb(up->port.iobase + 1); - case SERIAL_IO_MEM: + case UPIO_MEM: return readb(up->port.membase + offset); default: @@ -139,12 +139,12 @@ serial_out(struct uart_sunsu_port *up, int offset, int value) offset <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_HUB6: + case UPIO_HUB6: outb(up->port.hub6 - 1 + offset, up->port.iobase); outb(value, up->port.iobase + 1); break; - case SERIAL_IO_MEM: + case UPIO_MEM: writeb(value, up->port.membase + offset); break; @@ -1052,7 +1052,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up) return; up->type_probed = PORT_UNKNOWN; - up->port.iotype = SERIAL_IO_MEM; + up->port.iotype = UPIO_MEM; /* * First we look for Ebus-bases su's diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 3c72484..5cc4d4c 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1487,7 +1487,7 @@ static void __init sunzilog_prepare(void) up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB; /* Channel A */ - up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 0].port.iotype = UPIO_MEM; up[(chip * 2) + 0].port.irq = zilog_irq; up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; up[(chip * 2) + 0].port.fifosize = 1; @@ -1498,7 +1498,7 @@ static void __init sunzilog_prepare(void) up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; /* Channel B */ - up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 1].port.iotype = UPIO_MEM; up[(chip * 2) + 1].port.irq = zilog_irq; up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; up[(chip * 2) + 1].port.fifosize = 1; diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c index 9378895..df705fd 100644 --- a/drivers/serial/v850e_uart.c +++ b/drivers/serial/v850e_uart.c @@ -496,7 +496,7 @@ static int __init v850e_uart_init (void) port->ops = &v850e_uart_ops; port->line = chan; - port->iotype = SERIAL_IO_MEM; + port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; /* We actually use multiple IRQs, but the serial -- cgit v1.1