From 185095fb80ce57c0f3db8738e36ad7c02dc34d33 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jun 2012 02:23:37 +0000 Subject: e1000e: use more informative logging macros when netdev not yet registered Based on a report from Ethan Zhao, before calling register_netdev() the driver should be using logging macros that do not display the potentially confusing "(unregistered net_device)" yet still display the useful driver name and PCI bus/device/function. Reported-by: Ethan Zhao Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 11 +++++--- drivers/net/ethernet/intel/e1000e/param.c | 43 +++++++++++++++++++----------- 2 files changed, 34 insertions(+), 20 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 31d37a2..ba86b3f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6238,7 +6238,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) - e_info("PHY reset is blocked due to SOL/IDER session.\n"); + dev_info(&pdev->dev, + "PHY reset is blocked due to SOL/IDER session.\n"); /* Set initial default active device features */ netdev->features = (NETIF_F_SG | @@ -6288,7 +6289,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { - e_err("The NVM Checksum Is Not Valid\n"); + dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -6298,13 +6299,15 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* copy the MAC address */ if (e1000e_read_mac_addr(&adapter->hw)) - e_err("NVM Read Error while reading MAC address\n"); + dev_err(&pdev->dev, + "NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - e_err("Invalid MAC Address: %pM\n", netdev->perm_addr); + dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", + netdev->perm_addr); err = -EIO; goto err_eeprom; } diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 55cc1565b..dfbfa7f 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -199,16 +199,19 @@ static int __devinit e1000_validate_option(unsigned int *value, case enable_option: switch (*value) { case OPTION_ENABLED: - e_info("%s Enabled\n", opt->name); + dev_info(&adapter->pdev->dev, "%s Enabled\n", + opt->name); return 0; case OPTION_DISABLED: - e_info("%s Disabled\n", opt->name); + dev_info(&adapter->pdev->dev, "%s Disabled\n", + opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - e_info("%s set to %i\n", opt->name, *value); + dev_info(&adapter->pdev->dev, "%s set to %i\n", + opt->name, *value); return 0; } break; @@ -220,7 +223,8 @@ static int __devinit e1000_validate_option(unsigned int *value, ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - e_info("%s\n", ent->str); + dev_info(&adapter->pdev->dev, "%s\n", + ent->str); return 0; } } @@ -230,8 +234,8 @@ static int __devinit e1000_validate_option(unsigned int *value, BUG(); } - e_info("Invalid %s value specified (%i) %s\n", opt->name, *value, - opt->err); + dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n", + opt->name, *value, opt->err); *value = opt->def; return -1; } @@ -251,8 +255,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) int bd = adapter->bd_number; if (bd >= E1000_MAX_NIC) { - e_notice("Warning: no configuration for board #%i\n", bd); - e_notice("Using defaults for all values\n"); + dev_notice(&adapter->pdev->dev, + "Warning: no configuration for board #%i\n", bd); + dev_notice(&adapter->pdev->dev, + "Using defaults for all values\n"); } { /* Transmit Interrupt Delay */ @@ -366,27 +372,32 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) * default values */ if (adapter->itr > 4) - e_info("%s set to default %d\n", opt.name, - adapter->itr); + dev_info(&adapter->pdev->dev, + "%s set to default %d\n", opt.name, + adapter->itr); } adapter->itr_setting = adapter->itr; switch (adapter->itr) { case 0: - e_info("%s turned off\n", opt.name); + dev_info(&adapter->pdev->dev, "%s turned off\n", + opt.name); break; case 1: - e_info("%s set to dynamic mode\n", opt.name); + dev_info(&adapter->pdev->dev, + "%s set to dynamic mode\n", opt.name); adapter->itr = 20000; break; case 3: - e_info("%s set to dynamic conservative mode\n", - opt.name); + dev_info(&adapter->pdev->dev, + "%s set to dynamic conservative mode\n", + opt.name); adapter->itr = 20000; break; case 4: - e_info("%s set to simplified (2000-8000 ints) mode\n", - opt.name); + dev_info(&adapter->pdev->dev, + "%s set to simplified (2000-8000 ints) mode\n", + opt.name); break; default: /* -- cgit v1.1 From 4f8a91ad9aafbc7c70097a16404fa89aa41c8deb Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 28 Mar 2012 11:42:45 +0000 Subject: ixgbe: align flow control DV macros with datasheet The flow control DV macros are used to calculate the flow control high and low thresholds. This patch annotates these macros slightly better and fixes the issues below. The macro variables are renamed LINK to _max_frame_link and TC to _max_frame_tc. This was to avoid confusion and make them more readable. It was found that people auditing the code read TC to be 'traffic class' in the 802.1Q definition instead of the max frame size of the tc. Hopefully it is clear now. This audit also found the following real deviations from the theoretical values. Fixed in this patch. * I multiplied the DV calculations by (36/25) which always evaluates to 1. This does not match the intended theoretical value of 1.44. * IXGBE_BT2KB added 1023 to account for rounding however this really should be 8 * 1023 - 1 to account for division by 8k. * x2 multiplication of max frame in DV calculations to account for updated hardware recommendations. With this patch the DV values are inline with the recommendations in the 82599 and 82598 data sheets. Its worth noting I did not see any dropped frames with flow control on in my experiments without this patch. However aligning with the hardware specs and recommendations seems like a good idea here to account for worst case scenarios. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 37 ++++++++++++++++----------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 204848d..1085c07 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2419,7 +2419,7 @@ typedef u32 ixgbe_physical_layer; */ /* BitTimes (BT) conversion */ -#define IXGBE_BT2KB(BT) ((BT + 1023) / (8 * 1024)) +#define IXGBE_BT2KB(BT) ((BT + (8 * 1024 - 1)) / (8 * 1024)) #define IXGBE_B2BT(BT) (BT * 8) /* Calculate Delay to respond to PFC */ @@ -2450,24 +2450,31 @@ typedef u32 ixgbe_physical_layer; #define IXGBE_PCI_DELAY 10000 /* Calculate X540 delay value in bit times */ -#define IXGBE_FILL_RATE (36 / 25) - -#define IXGBE_DV_X540(LINK, TC) (IXGBE_FILL_RATE * \ - (IXGBE_B2BT(LINK) + IXGBE_PFC_D + \ - (2 * IXGBE_CABLE_DC) + \ - (2 * IXGBE_ID_X540) + \ - IXGBE_HD + IXGBE_B2BT(TC))) +#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \ + ((36 * \ + (IXGBE_B2BT(_max_frame_link) + \ + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + \ + (2 * IXGBE_ID_X540) + \ + IXGBE_HD) / 25 + 1) + \ + 2 * IXGBE_B2BT(_max_frame_tc)) /* Calculate 82599, 82598 delay value in bit times */ -#define IXGBE_DV(LINK, TC) (IXGBE_FILL_RATE * \ - (IXGBE_B2BT(LINK) + IXGBE_PFC_D + \ - (2 * IXGBE_CABLE_DC) + (2 * IXGBE_ID) + \ - IXGBE_HD + IXGBE_B2BT(TC))) +#define IXGBE_DV(_max_frame_link, _max_frame_tc) \ + ((36 * \ + (IXGBE_B2BT(_max_frame_link) + \ + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + \ + (2 * IXGBE_ID) + \ + IXGBE_HD) / 25 + 1) + \ + 2 * IXGBE_B2BT(_max_frame_tc)) /* Calculate low threshold delay values */ -#define IXGBE_LOW_DV_X540(TC) (2 * IXGBE_B2BT(TC) + \ - (IXGBE_FILL_RATE * IXGBE_PCI_DELAY)) -#define IXGBE_LOW_DV(TC) (2 * IXGBE_LOW_DV_X540(TC)) +#define IXGBE_LOW_DV_X540(_max_frame_tc) \ + (2 * IXGBE_B2BT(_max_frame_tc) + \ + (36 * IXGBE_PCI_DELAY / 25) + 1) +#define IXGBE_LOW_DV(_max_frame_tc) \ + (2 * IXGBE_LOW_DV_X540(_max_frame_tc)) /* Software ATR hash keys */ #define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2 -- cgit v1.1 From 6cbc52ef10ba3c7fbd8954270c025ffbf643ab05 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Wed, 16 May 2012 07:06:38 +0000 Subject: ixgbe: do not compile ixgbe_sysfs.c when CONFIG_IXGBE_HWMON is not set ixgbe_sysfs.c is only needed when CONFIG_IXGBE_HWMON is configured in the kernel. Signed-off-by: Emil Tantilov Acked-by: Don Skidmore Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/Makefile | 4 ++-- drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index 0bdf06b..5fd5d04 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -34,11 +34,11 @@ obj-$(CONFIG_IXGBE) += ixgbe.o ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ - ixgbe_mbx.o ixgbe_x540.o ixgbe_sysfs.o ixgbe_lib.o + ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_PTP) += ixgbe_ptp.o - +ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c index 1d80b1c..2334fce 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c @@ -37,7 +37,6 @@ #include #include -#ifdef CONFIG_IXGBE_HWMON /* hwmon callback functions */ static ssize_t ixgbe_hwmon_show_location(struct device *dev, struct device_attribute *attr, @@ -241,5 +240,4 @@ err: exit: return rc; } -#endif /* CONFIG_IXGBE_HWMON */ -- cgit v1.1 From 0ede4a606af1778b24b84b7feed3c0bed2751a34 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 22 May 2012 06:08:32 +0000 Subject: ixgbe: ptp code cleanup This patch fixes two minor nits from Richard Cochran. The first is a case of ambitious line wrapping that wasn't necessary. The second is to re-order the flag checks for PPS support. Previously, the hardware test was done first, and the interrupt flag test was done second. Now, test the interrupt flag and use the unlikely macro. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 +++----- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 13 +++++++------ 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 17ad6a3..1675b66 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -790,12 +790,10 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, total_packets += tx_buffer->gso_segs; #ifdef CONFIG_IXGBE_PTP - if (unlikely(tx_buffer->tx_flags & - IXGBE_TX_FLAGS_TSTAMP)) - ixgbe_ptp_tx_hwtstamp(q_vector, - tx_buffer->skb); - + if (unlikely(tx_buffer->tx_flags & IXGBE_TX_FLAGS_TSTAMP)) + ixgbe_ptp_tx_hwtstamp(q_vector, tx_buffer->skb); #endif + /* free the skb */ dev_kfree_skb_any(tx_buffer->skb); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index ddc6a4d..174f41f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -307,13 +307,14 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) !(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED)) return; - switch (hw->mac.type) { - case ixgbe_mac_X540: - if (eicr & IXGBE_EICR_TIMESYNC) + if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) { + switch (hw->mac.type) { + case ixgbe_mac_X540: ptp_clock_event(adapter->ptp_clock, &event); - break; - default: - break; + break; + default: + break; + } } } -- cgit v1.1 From c19197a7866fee6ff9985d9dc9962bc2ccbd3d7b Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 22 May 2012 06:08:37 +0000 Subject: ixgbe: PTP Fix hwtstamp mode settings When enabling the hwtstamp mode for Rx timestamping the V2 ptp event type specific modes (Delay Request and Sync) have been rolled into the V2 all event packet modes, in order to more accurately represent what hardware is doing. Hardware always timestamps the Path delay packets when a V2 mode is selected, regardless of what type was selected (in order to always support Path delay mode). However this means the user selected modes of timestamping only Sync or Delay Request is not truly supported. This patch correctly sets the mode for the hwtstamp config and returns to the user that all V2 event packets will be timestamped. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 174f41f..5ed8cff 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -540,6 +540,11 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, * type has to be specified. Matching the kind of event packet is * not supported, with the exception of "all V2 events regardless of * level 2 or 4". + * + * Since hardware always timestamps Path delay packets when timestamping V2 + * packets, regardless of the type specified in the register, only use V2 + * Event mode. This more accurately tells the user what the hardware is going + * to do anyways. */ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd) @@ -583,27 +588,15 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; is_l4 = true; break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: - tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; - tsync_rx_mtrl = IXGBE_RXMTRL_V2_SYNC_MSG; - is_l2 = true; - is_l4 = true; - config.rx_filter = HWTSTAMP_FILTER_SOME; - break; case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: - tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; - tsync_rx_mtrl = IXGBE_RXMTRL_V2_DELAY_REQ_MSG; - is_l2 = true; - is_l4 = true; - config.rx_filter = HWTSTAMP_FILTER_SOME; - break; - case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: - case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: - case HWTSTAMP_FILTER_PTP_V2_EVENT: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; is_l2 = true; -- cgit v1.1 From 1d1a79b5b94b0aa84e1e78dd9acdcffb12274848 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 22 May 2012 06:18:08 +0000 Subject: ixgbe: Check PTP Rx timestamps via BPF filter This patch fixes a potential Rx timestamp deadlock that causes the Rx timestamping to stall indefinitely. The issue could occur when a PTP packet is timestamped by hardware but never reaches the Rx queue. In order to prevent a permanent loss of timestamping, the RXSTMP(L/H) registers have to be read to unlock them. (This used to only occur when a packet that was timestamped reached the software.) However the registers can't be read early otherwise there is no way to correlate them to the packet. This patch introduces a filter function which can be used to determine if a packet should have been timestamped. Supplied with the filter setup by the hwtstamp ioctl, check to make sure the PTP protocol and message type match the expected values. If so, then read the timestamp registers (to free them.) At this point check the descriptor bit, if the bit is set then we know this packet correlates to the timestamp stored in the RXTSTAMP registers. Otherwise, assume that packet was dropped by the hardware, and ignore this timestamp value. However, we have at least unlocked the rxtstamp registers for future timestamping. Due to the way the driver handles skb data, it cannot be directly accessed. In order to work around this, a copy of the skb data into a linear buffer is made. From this buffer it becomes possible to read the data correctly Signed-off-by: Jacob Keller Reviewed-by: Richard Cochran Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 113 +++++++++++++++++++++++--- 3 files changed, 104 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 3ef3c52..41f9f6e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -561,6 +561,7 @@ struct ixgbe_adapter { spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; + int rx_hwtstamp_filter; u32 base_incval; u32 cycle_speed; #endif /* CONFIG_IXGBE_PTP */ @@ -718,6 +719,7 @@ extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, struct sk_buff *skb); extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb); extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1675b66..b0ddfd4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1397,8 +1397,7 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_rx_checksum(rx_ring, rx_desc, skb); #ifdef CONFIG_IXGBE_PTP - if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS)) - ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); + ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, rx_desc, skb); #endif if ((dev->features & NETIF_F_HW_VLAN_RX) && diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 5ed8cff..cb7d1b2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -26,6 +26,7 @@ *******************************************************************************/ #include "ixgbe.h" #include +#include /* * The 82599 and the X540 do not have true 64bit nanosecond scale @@ -100,6 +101,10 @@ #define NSECS_PER_SEC 1000000000ULL #endif +static struct sock_filter ptp_filter[] = { + PTP_FILTER +}; + /** * ixgbe_ptp_read - read raw cycle counter (to be used by time counter) * @cc - the cyclecounter structure @@ -426,6 +431,68 @@ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) } /** + * ixgbe_ptp_match - determine if this skb matches a ptp packet + * @skb: pointer to the skb + * @hwtstamp: pointer to the hwtstamp_config to check + * + * Determine whether the skb should have been timestamped, assuming the + * hwtstamp was set via the hwtstamp ioctl. Returns non-zero when the packet + * should have a timestamp waiting in the registers, and 0 otherwise. + * + * V1 packets have to check the version type to determine whether they are + * correct. However, we can't directly access the data because it might be + * fragmented in the SKB, in paged memory. In order to work around this, we + * use skb_copy_bits which will properly copy the data whether it is in the + * paged memory fragments or not. We have to copy the IP header as well as the + * message type. + */ +static int ixgbe_ptp_match(struct sk_buff *skb, int rx_filter) +{ + struct iphdr iph; + u8 msgtype; + unsigned int type, offset; + + if (rx_filter == HWTSTAMP_FILTER_NONE) + return 0; + + type = sk_run_filter(skb, ptp_filter); + + if (likely(rx_filter == HWTSTAMP_FILTER_PTP_V2_EVENT)) + return type & PTP_CLASS_V2; + + /* For the remaining cases actually check message type */ + switch (type) { + case PTP_CLASS_V1_IPV4: + skb_copy_bits(skb, OFF_IHL, &iph, sizeof(iph)); + offset = ETH_HLEN + (iph.ihl << 2) + UDP_HLEN + OFF_PTP_CONTROL; + break; + case PTP_CLASS_V1_IPV6: + offset = OFF_PTP6 + OFF_PTP_CONTROL; + break; + default: + /* other cases invalid or handled above */ + return 0; + } + + /* Make sure our buffer is long enough */ + if (skb->len < offset) + return 0; + + skb_copy_bits(skb, offset, &msgtype, sizeof(msgtype)); + + switch (rx_filter) { + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + return (msgtype == IXGBE_RXMTRL_V1_SYNC_MSG); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + return (msgtype == IXGBE_RXMTRL_V1_DELAY_REQ_MSG); + break; + default: + return 0; + } +} + +/** * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp * @q_vector: structure containing interrupt and ring information * @skb: particular skb to send timestamp with @@ -474,6 +541,7 @@ void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, /** * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @q_vector: structure containing interrupt and ring information + * @rx_desc: the rx descriptor * @skb: particular skb to send timestamp with * * if the timestamp is valid, we convert it into the timecounter ns @@ -481,6 +549,7 @@ void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, * is passed up the network stack */ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { struct ixgbe_adapter *adapter; @@ -498,21 +567,33 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, hw = &adapter->hw; tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + + /* Check if we have a valid timestamp and make sure the skb should + * have been timestamped */ + if (likely(!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID) || + !ixgbe_ptp_match(skb, adapter->rx_hwtstamp_filter))) + return; + + /* + * Always read the registers, in order to clear a possible fault + * because of stagnant RX timestamp values for a packet that never + * reached the queue. + */ regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; /* - * If this bit is set, then the RX registers contain the time stamp. No - * other packet will be time stamped until we read these registers, so - * read the registers to make them available again. Because only one - * packet can be time stamped at a time, we know that the register - * values must belong to this one here and therefore we don't need to - * compare any of the additional attributes stored for it. + * If the timestamp bit is set in the packet's descriptor, we know the + * timestamp belongs to this packet. No other packet can be + * timestamped until the registers for timestamping have been read. + * Therefor only one packet with this bit can be in the queue at a + * time, and the rx timestamp values that were in the registers belong + * to this packet. * * If nothing went wrong, then it should have a skb_shared_tx that we * can turn into a skb_shared_hwtstamps. */ - if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) + if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) return; spin_lock_irqsave(&adapter->tmreg_lock, flags); @@ -598,19 +679,20 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; is_l2 = true; is_l4 = true; + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_ALL: default: /* - * register RXMTRL must be set, therefore it is not - * possible to time stamp both V1 Sync and Delay_Req messages - * and hardware does not support timestamping all packets - * => return error + * register RXMTRL must be set in order to do V1 packets, + * therefore it is not possible to time stamp both V1 Sync and + * Delay_Req messages and hardware does not support + * timestamping all packets => return error */ + config.rx_filter = HWTSTAMP_FILTER_NONE; return -ERANGE; } @@ -620,6 +702,9 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, return 0; } + /* Store filter value for later use */ + adapter->rx_hwtstamp_filter = config.rx_filter; + /* define ethertype filter for timestamped packets */ if (is_l2) IXGBE_WRITE_REG(hw, IXGBE_ETQF(3), @@ -855,6 +940,10 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) return; } + /* initialize the ptp filter */ + if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) + e_dev_warn("ptp_filter_init failed\n"); + spin_lock_init(&adapter->tmreg_lock); ixgbe_ptp_start_cyclecounter(adapter); -- cgit v1.1