From 858022aa6fad90ec86c567cbf54682a61dd39a01 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 18 Mar 2011 09:33:02 -0700 Subject: wireless: fix 80211 kernel-doc warnings Fix many of each of these warnings: Warning(include/net/cfg80211.h:519): No description found for parameter 'rxrate' Warning(include/net/mac80211.h:1163): bad line: Signed-off-by: Randy Dunlap Cc: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 3 ++- include/net/mac80211.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 60f7876..b2b9d28 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -486,7 +486,8 @@ struct rate_info { * @plink_state: mesh peer link state * @signal: signal strength of last received packet in dBm * @signal_avg: signal strength average in dBm - * @txrate: current unicast bitrate to this station + * @txrate: current unicast bitrate from this station + * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station * @tx_packets: packets transmitted to this station * @tx_retries: cumulative retry counts diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8650e7b..cefe1b3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1160,7 +1160,7 @@ enum ieee80211_hw_flags { * @napi_weight: weight used for NAPI polling. You must specify an * appropriate value here if a napi_poll operation is provided * by your driver. - + * * @max_rx_aggregation_subframes: maximum buffer size (number of * sub-frames) to be used for A-MPDU block ack receiver * aggregation. -- cgit v1.1