From 6269b731560d69c5eaa929909891edec39496d71 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 22 Apr 2009 15:11:05 +1000 Subject: wireless: remove unneeded EXPORT_SYMBOL the tickles a powerpc compiler bug drivers/net/wireless/iwlwifi/iwl3945-base.c:1415: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict I am pretty sure that this is a compiler bug, so not to worry. However, as far as I can see, iwl-3945.o (the only user) and iwl3945-base.o are always linked into the same module, so the EXPORT_SYMBOL (which causes the problem) should not be needed. Correct? Signed-off-by: Stephen Rothwell Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 617c423..70a00c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); } -EXPORT_SYMBOL(iwl3945_rx_queue_reset); /* * this should be called while priv->lock is locked -- cgit v1.1 From e805e4d0b53506dff4255a2792483f094e7fcd2c Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Wed, 22 Apr 2009 10:59:37 +0300 Subject: rndis_wlan: fix initialization order for workqueue&workers rndis_wext_link_change() might be called from rndis_command() at initialization stage and priv->workqueue/priv->work have not been initialized yet. This causes invalid opcode at rndis_wext_bind on some brands of bcm4320. Fix by initializing workqueue/workers in rndis_wext_bind() before rndis_command is used. This bug has existed since 2.6.25, reported at: http://bugzilla.kernel.org/show_bug.cgi?id=12794 Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index db91db7..bebf735 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) mutex_init(&priv->command_lock); spin_lock_init(&priv->stats_lock); + /* because rndis_command() sleeps we need to use workqueue */ + priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + INIT_WORK(&priv->work, rndis_wext_worker); + INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); + /* try bind rndis_host */ retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS); if (retval < 0) @@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) disassociate(usbdev, 1); netif_carrier_off(usbdev->net); - /* because rndis_command() sleeps we need to use workqueue */ - priv->workqueue = create_singlethread_workqueue("rndis_wlan"); - INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); queue_delayed_work(priv->workqueue, &priv->stats_work, round_jiffies_relative(STATS_UPDATE_JIFFIES)); - INIT_WORK(&priv->work, rndis_wext_worker); return 0; fail: + cancel_delayed_work_sync(&priv->stats_work); + cancel_work_sync(&priv->work); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + kfree(priv); return retval; } -- cgit v1.1 From 74aa9be0ea0ffeb233f45c39f3cf594b68bbbb89 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 10:45:04 +0200 Subject: iwlwifi: notify on scan completion even when shutting down Under certain circumstances iwlwifi can get stuck and will no longer accept scan requests, because the core code (cfg80211) thinks that it's still processing one. This fixes one of the points where it can happen, but I've still seen it (although only with my radio-off-when-idle patch). Signed-off-by: Johannes Berg Acked-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 23644cf..e7c65c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + ieee80211_scan_completed(priv->hw, false); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - ieee80211_scan_completed(priv->hw, false); - /* Since setting the TXPOWER may have been deferred while * performing the scan, fire one off */ mutex_lock(&priv->mutex); -- cgit v1.1 From b7fcb5c4a4c27da2f6d86cb03d18687e537442cf Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 27 Apr 2009 22:12:43 -0400 Subject: ath5k: fix buffer overrun in rate debug code char bname[5] is too small for the string "X GHz" when the null terminator is taken into account. Thus, turning on rate debugging can crash unless we have lucky stack alignment. Cc: stable@kernel.org Reported-by: Paride Legovini Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 9770bb3..4904a07 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc) for (b = 0; b < IEEE80211_NUM_BANDS; b++) { struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; + char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: strcpy(bname, "2 GHz"); -- cgit v1.1 From d4c4a9a1bce1912ed5681251f0037fd4f2364a3e Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 29 Apr 2009 11:41:24 +0100 Subject: mac80211: fix modprobe deadlock by not calling wep_init under rtnl_lock - ieee80211_wep_init(), which is called with rtnl_lock held, blocks in request_module() [waiting for modprobe to load a crypto module]. - modprobe blocks in a call to flush_workqueue(), when it closes a TTY [presumably when it exits]. - The workqueue item linkwatch_event() blocks on rtnl_lock. There's no reason for wep_init() to be called with rtnl_lock held, so just move it outside the critical section. Signed-off-by: Alan Jenkins Signed-off-by: John W. Linville --- net/mac80211/main.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index fbcbed6..00968c2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -909,6 +909,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (result < 0) goto fail_sta_info; + result = ieee80211_wep_init(local); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); + goto fail_wep; + } + rtnl_lock(); result = dev_alloc_name(local->mdev, local->mdev->name); if (result < 0) @@ -930,14 +937,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; - } - /* add one default STA interface if supported */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { result = ieee80211_if_add(local, "wlan%d", NULL, @@ -967,13 +966,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return 0; -fail_wep: - rate_control_deinitialize(local); fail_rate: unregister_netdevice(local->mdev); local->mdev = NULL; fail_dev: rtnl_unlock(); + ieee80211_wep_free(local); +fail_wep: sta_info_stop(local); fail_sta_info: debugfs_hw_del(local); -- cgit v1.1 From c428c89201a57a0ce24c37ed79e540d1f4101cf3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Apr 2009 00:28:18 +0200 Subject: mac80211: default to automatic power control In "mac80211: correct wext transmit power handler" I fixed the wext handler, but forgot to make the default of the user_power_level -1 (aka "auto"), so that now the transmit power is always set to 0, causing associations to time out and similar problems since we're transmitting with very little power. Correct this by correcting the default user_power_level to -1. Signed-off-by: Johannes Berg Bisected-by: Niel Lambrechts Signed-off-by: John W. Linville --- net/mac80211/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 00968c2..1413419 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.conf.long_frame_max_tx_count = 4; local->hw.conf.short_frame_max_tx_count = 7; local->hw.conf.radio_enabled = true; + local->user_power_level = -1; INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); -- cgit v1.1 From 1319ebadf185933e6b7ff95211d3cef9004e9754 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 29 Apr 2009 11:57:34 +0000 Subject: mv643xx_eth: OOM handling fixes Currently, when OOM occurs during rx ring refill, mv643xx_eth will get into an infinite loop, due to the refill function setting the OOM bit but not clearing the 'rx refill needed' bit for this queue, while the calling function (the NAPI poll handler) will call the refill function in a loop until the 'rx refill needed' bit goes off, without checking the OOM bit. This patch fixes this by checking the OOM bit in the NAPI poll handler before attempting to do rx refill. This means that once OOM occurs, we won't try to do any memory allocations again until the next invocation of the poll handler. While we're at it, change the OOM flag to be a single bit instead of one bit per receive queue since OOM is a system state rather than a per-queue state, and cancel the OOM timer on entry to the NAPI poll handler if it's running to prevent it from firing when we've already come out of OOM. Signed-off-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b3185bf..038beff7 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -393,12 +393,12 @@ struct mv643xx_eth_private { struct work_struct tx_timeout_task; struct napi_struct napi; + u8 oom; u8 work_link; u8 work_tx; u8 work_tx_end; u8 work_rx; u8 work_rx_refill; - u8 work_rx_oom; int skb_size; struct sk_buff_head rx_recycle; @@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) dma_get_cache_alignment() - 1); if (skb == NULL) { - mp->work_rx_oom |= 1 << rxq->index; + mp->oom = 1; goto oom; } @@ -2167,8 +2167,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) mp = container_of(napi, struct mv643xx_eth_private, napi); - mp->work_rx_refill |= mp->work_rx_oom; - mp->work_rx_oom = 0; + if (unlikely(mp->oom)) { + mp->oom = 0; + del_timer(&mp->rx_oom); + } work_done = 0; while (work_done < budget) { @@ -2182,8 +2184,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) continue; } - queue_mask = mp->work_tx | mp->work_tx_end | - mp->work_rx | mp->work_rx_refill; + queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx; + if (likely(!mp->oom)) + queue_mask |= mp->work_rx_refill; + if (!queue_mask) { if (mv643xx_eth_collect_events(mp)) continue; @@ -2204,7 +2208,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_maybe_wake(mp->txq + queue); } else if (mp->work_rx & queue_mask) { work_done += rxq_process(mp->rxq + queue, work_tbd); - } else if (mp->work_rx_refill & queue_mask) { + } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) { work_done += rxq_refill(mp->rxq + queue, work_tbd); } else { BUG(); @@ -2212,7 +2216,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) } if (work_done < budget) { - if (mp->work_rx_oom) + if (mp->oom) mod_timer(&mp->rx_oom, jiffies + (HZ / 10)); napi_complete(napi); wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT); @@ -2372,7 +2376,7 @@ static int mv643xx_eth_open(struct net_device *dev) rxq_refill(mp->rxq + i, INT_MAX); } - if (mp->work_rx_oom) { + if (mp->oom) { mp->rx_oom.expires = jiffies + (HZ / 10); add_timer(&mp->rx_oom); } -- cgit v1.1 From 93af7aca44f0e82e67bda10a0fb73d383edcc8bd Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 29 Apr 2009 11:58:18 +0000 Subject: mv643xx_eth: 64bit mib counter read fix On several mv643xx_eth hardware versions, the two 64bit mib counters for 'good octets received' and 'good octets sent' are actually 32bit counters, and reading from the upper half of the register has the same effect as reading from the lower half of the register: an atomic read-and-clear of the entire 32bit counter value. This can under heavy traffic occasionally lead to small numbers being added to the upper half of the 64bit mib counter even though no 32bit wrap has occured. Since we poll the mib counters at least every 30 seconds anyway, we might as well just skip the reads of the upper halves of the hardware counters without breaking the stats, which this patch does. Signed-off-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 038beff7..a400d71 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1255,7 +1255,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); - p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); p->internal_mac_transmit_err += mib_read(mp, 0x0c); p->good_frames_received += mib_read(mp, 0x10); @@ -1269,7 +1268,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->frames_512_to_1023_octets += mib_read(mp, 0x30); p->frames_1024_to_max_octets += mib_read(mp, 0x34); p->good_octets_sent += mib_read(mp, 0x38); - p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32; p->good_frames_sent += mib_read(mp, 0x40); p->excessive_collision += mib_read(mp, 0x44); p->multicast_frames_sent += mib_read(mp, 0x48); -- cgit v1.1 From 7a67e56fd362d3edfde1f19170893508c3940d3a Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Thu, 30 Apr 2009 05:41:19 -0700 Subject: net: Fix oops when splicing skbs from a frag_list. Lennert Buytenhek wrote: > Since 4fb669948116d928ae44262ab7743732c574630d ("net: Optimize memory > usage when splicing from sockets.") I'm seeing this oops (e.g. in > 2.6.30-rc3) when splicing from a TCP socket to /dev/null on a driver > (mv643xx_eth) that uses LRO in the skb mode (lro_receive_skb) rather > than the frag mode: My patch incorrectly assumed skb->sk was always valid, but for "frag_listed" skbs we can only use skb->sk of their parent. Reported-by: Lennert Buytenhek Debugged-by: Lennert Buytenhek Tested-by: Lennert Buytenhek Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/core/skbuff.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ce6356c..f091a5a 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1365,9 +1365,8 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static inline struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb) + struct sk_buff *skb, struct sock *sk) { - struct sock *sk = skb->sk; struct page *p = sk->sk_sndmsg_page; unsigned int off; @@ -1405,13 +1404,14 @@ new_page: */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, int linear) + struct sk_buff *skb, int linear, + struct sock *sk) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; if (linear) { - page = linear_to_page(page, len, &offset, skb); + page = linear_to_page(page, len, &offset, skb, sk); if (!page) return 1; } else @@ -1442,7 +1442,8 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd, int linear) + struct splice_pipe_desc *spd, int linear, + struct sock *sk) { if (!*len) return 1; @@ -1465,7 +1466,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, &flen, poff, skb, linear)) + if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1481,8 +1482,8 @@ static inline int __splice_segment(struct page *page, unsigned int poff, * pipe is full or if we already spliced the requested length. */ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, - unsigned int *len, - struct splice_pipe_desc *spd) + unsigned int *len, struct splice_pipe_desc *spd, + struct sock *sk) { int seg; @@ -1492,7 +1493,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, 1)) + offset, len, skb, spd, 1, sk)) return 1; /* @@ -1502,7 +1503,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd, 0)) + offset, len, skb, spd, 0, sk)) return 1; } @@ -1528,12 +1529,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; + struct sock *sk = skb->sk; /* * __skb_splice_bits() only fails if the output has no room left, * so no point in going over the frag_list for the error case. */ - if (__skb_splice_bits(skb, &offset, &tlen, &spd)) + if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk)) goto done; else if (!tlen) goto done; @@ -1545,14 +1547,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct sk_buff *list = skb_shinfo(skb)->frag_list; for (; list && tlen; list = list->next) { - if (__skb_splice_bits(list, &offset, &tlen, &spd)) + if (__skb_splice_bits(list, &offset, &tlen, &spd, sk)) break; } } done: if (spd.nr_pages) { - struct sock *sk = skb->sk; int ret; /* -- cgit v1.1 From ec581f6a42bbbea5271c66da9769a41b46c74e10 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 May 2009 09:05:06 -0700 Subject: net: Fix skb_tx_hash() for forwarding workloads. When skb_rx_queue_recorded() is true, we dont want to use jash distribution as the device driver exactly told us which queue was selected at RX time. jhash makes a statistical shuffle, but this wont work with 8 static inputs. Later improvements would be to compute reciprocal value of real_num_tx_queues to avoid a divide here. But this computation should be done once, when real_num_tx_queues is set. This needs a separate patch, and a new field in struct net_device. Reported-by: Andrew Dickinson Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 308a7d0..e2e9e4a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1735,11 +1735,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb) { u32 hash; - if (skb_rx_queue_recorded(skb)) { - hash = skb_get_rx_queue(skb); - } else if (skb->sk && skb->sk->sk_hash) { + if (skb_rx_queue_recorded(skb)) + return skb_get_rx_queue(skb) % dev->real_num_tx_queues; + + if (skb->sk && skb->sk->sk_hash) hash = skb->sk->sk_hash; - } else + else hash = skb->protocol; hash = jhash_1word(hash, skb_tx_hashrnd); -- cgit v1.1 From 0f3d042ed2f934f149ccb78300454beaf0c1134b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 May 2009 09:10:46 -0700 Subject: netfilter: use likely() in xt_info_rdlock_bh() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netfilter/x_tables.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1b2e435..c9efe03 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void) local_bh_disable(); lock = &__get_cpu_var(xt_info_locks); - if (!lock->readers++) + if (likely(!lock->readers++)) spin_lock(&lock->lock); } @@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void) { struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); - if (!--lock->readers) + if (likely(!--lock->readers)) spin_unlock(&lock->lock); local_bh_enable(); } -- cgit v1.1 From 00b64f2aa5e8741b49e48ebad1116cc78dbbf0fd Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Fri, 1 May 2009 09:15:09 -0700 Subject: =?UTF-8?q?cxgb3:=20fixing=20gcc=204.4=20compiler=20warning:=20sug?= =?UTF-8?q?gest=20parentheses=20around=20operand=20of=20=E2=80=98!?= =?UTF-8?q?=E2=80=99?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trivial: fixing gcc 4.4 compiler warning: drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’: drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’ Signed-off-by: Sergey Senozhatsky Signed-off-by: David S. Miller --- drivers/net/cxgb3/t3_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index e1bd690..4f68aeb 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, adapter->params.info = ai; adapter->params.nports = ai->nports0 + ai->nports1; - adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); + adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if -- cgit v1.1 From 689c96cca7ec3d2ba7fba00481810f99f1803c63 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Apr 2009 03:39:04 +0000 Subject: bonding: bond_slave_info_query() fix bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63369b6..67515b7 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave; - int i, found = 0; - - if (info->slave_id < 0) { - return -ENODEV; - } + int i, res = -ENODEV; read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (i == (int)info->slave_id) { - found = 1; + res = 0; + strcpy(info->slave_name, slave->dev->name); + info->link = slave->link; + info->state = slave->state; + info->link_failure_count = slave->link_failure_count; break; } } read_unlock(&bond->lock); - if (found) { - strcpy(info->slave_name, slave->dev->name); - info->link = slave->link; - info->state = slave->state; - info->link_failure_count = slave->link_failure_count; - } else { - return -ENODEV; - } - - return 0; + return res; } /*-------------------------------- Monitoring -------------------------------*/ -- cgit v1.1 From acda074390270ca9e28f2a9729f7b835e2ad6da4 Mon Sep 17 00:00:00 2001 From: Laszlo Attila Toth Date: Fri, 1 May 2009 15:23:10 -0700 Subject: xt_socket: checks for the state of nf_conntrack xt_socket can use connection tracking, and checks whether it is a module. Signed-off-by: Laszlo Attila Toth Signed-off-by: David S. Miller --- net/netfilter/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 881203c..cb3ad74 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -837,6 +837,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED + depends on !NF_CONNTRACK || NF_CONNTRACK select NF_DEFRAG_IPV4 help This option adds a `socket' match, which can be used to match -- cgit v1.1 From 2382b15bcc39228572ccf1d9a1185dcabb84c833 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Wed, 29 Apr 2009 20:45:17 +0000 Subject: netconsole: take care of NETDEV_UNREGISTER event MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When netconsole is loaded and a network interface fades away (e.g. on rmmod $interface_driver_module) the rmmod remains stuck and some locks are taken that prevent any additional module loading/unloading as well as interface up/down changes. In addition kernel logs (and console) get flooded at 10s interval with [ 122.464065] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 [ 132.704059] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This patch lets netconsole take NETDEV_UNREGISTER event into account and release the affected interface if it was in use. Signed-off-by: Bruno Prémont Acked-by: Matt Mackall Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index eceadf7..bf4af52 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this, struct netconsole_target *nt; struct net_device *dev = ptr; - if (!(event == NETDEV_CHANGENAME)) + if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER)) goto done; spin_lock_irqsave(&target_list_lock, flags); @@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_CHANGENAME: strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ); break; + case NETDEV_UNREGISTER: + if (!nt->enabled) + break; + netpoll_cleanup(&nt->np); + nt->enabled = 0; + printk(KERN_INFO "netconsole: network logging stopped" + ", interface %s unregistered\n", + dev->name); + break; } } netconsole_target_put(nt); -- cgit v1.1 From f293501c61c50b014ad2347661c6acd951c80fed Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Fri, 1 May 2009 05:46:51 +0000 Subject: smsc95xx: configure LED outputs SMSC LAN9500 has dual purpose GPIO/LED pins, and by default at power-on these are configured as GPIOs. This means that if LEDs are fitted they won't ever light. This patch sets them to be LED outputs for speed, duplex and link/activity. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 10 ++++++++++ drivers/net/usb/smsc95xx.h | 3 +++ 2 files changed, 13 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc16653..0fd68a5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h index 66b5c84..86bc449 100644 --- a/drivers/net/usb/smsc95xx.h +++ b/drivers/net/usb/smsc95xx.h @@ -99,6 +99,9 @@ #define PM_CTL_WUPS_MULTI_ (0x00000003) #define LED_GPIO_CFG (0x24) +#define LED_GPIO_CFG_SPD_LED (0x01000000) +#define LED_GPIO_CFG_LNK_LED (0x00100000) +#define LED_GPIO_CFG_FDX_LED (0x00010000) #define GPIO_CFG (0x28) -- cgit v1.1 From 726474b8cd0f0f49c570b1dbbab44be898797550 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Fri, 1 May 2009 06:07:22 +0000 Subject: smsc95xx: add support for LAN9512 and LAN9514 LAN9512 and LAN9514 are USB hubs with an integrated 10/100 ethernet controller. Logically this looks like an ethernet controller (similar to LAN9500) permanently attached to one of the hub's downstream ports. This patch adds the usb device id of the new ethernet controller to the smsc95xx driver. This id is the same in both new devices. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 0fd68a5..5a72833 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1241,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); -- cgit v1.1 From c047fcd245975f40312ed57bf43e7d4abd188e6b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 1 May 2009 15:34:02 -0700 Subject: virtio: add missing include to virtio_net.h virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h. Discovered when hacking on virtio-over-pci patches. Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- include/linux/virtio_net.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 242348b..cec79ad 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -4,6 +4,7 @@ * compatible drivers/servers. */ #include #include +#include /* The ID for virtio_net */ #define VIRTIO_ID_NET 1 -- cgit v1.1 From 1363d9b135270662852ed2e6629fb79a36de5400 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 1 May 2009 15:35:28 -0700 Subject: bonding: correct the cleanup in bond_create() This patch makes the cleanup in bond_create nicer :) Also now the forgotten free_netdev is called. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 67515b7..2188a96 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5158,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params) up_write(&bonding_rwsem); rtnl_unlock(); /* allows sysfs registration of net device */ res = bond_create_sysfs_entry(netdev_priv(bond_dev)); - if (res < 0) { - rtnl_lock(); - down_write(&bonding_rwsem); - bond_deinit(bond_dev); - unregister_netdevice(bond_dev); - goto out_rtnl; - } + if (res < 0) + goto out_unreg; return 0; +out_unreg: + rtnl_lock(); + down_write(&bonding_rwsem); + unregister_netdevice(bond_dev); out_bond: bond_deinit(bond_dev); out_netdev: -- cgit v1.1 From 23e258e1a871c0c0cd91c294f7e66ccac74ef243 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2009 17:27:56 +0000 Subject: virtio_net: Cleanup command queue scatterlist usage We were avoiding calling sg_init* on scatterlists passed into virtnet_send_command to prevent extraneous end markers. This caused build warnings for uninitialized variables. Cleanup the code to create proper scatterlists. Signed-off-by: Alex Williamson Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9c82a39..23eb282 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev) static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, struct scatterlist *data, int out, int in) { - struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; struct virtio_net_ctrl_hdr ctrl; virtio_net_ctrl_ack status = ~0; unsigned int tmp; + int i; if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) { BUG(); /* Caller should know better */ @@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sg_init_table(sg, out + in); sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0) @@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) promisc = ((dev->flags & IFF_PROMISC) != 0); allmulti = ((dev->flags & IFF_ALLMULTI) != 0); - sg_set_buf(sg, &promisc, sizeof(promisc)); + sg_init_one(sg, &promisc, sizeof(promisc)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_PROMISC, @@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) dev_warn(&dev->dev, "Failed to %sable promisc mode.\n", promisc ? "en" : "dis"); - sg_set_buf(sg, &allmulti, sizeof(allmulti)); + sg_init_one(sg, &allmulti, sizeof(allmulti)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_ALLMULTI, @@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) return; } + sg_init_table(sg, 2); + /* Store the unicast list and count in the front of the buffer */ mac_data->entries = dev->uc_count; addr = dev->uc_list; @@ -749,7 +753,7 @@ static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0)) @@ -761,7 +765,7 @@ static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0)) -- cgit v1.1 From 1824a9897473fda5e5e42f991ddc674c175e3a09 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2009 17:31:10 +0000 Subject: virtio_net: Fix function name typo Signed-off-by: Alex Williamson Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 23eb282..4d1d479 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -748,7 +748,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) kfree(buf); } -static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; @@ -760,7 +760,7 @@ static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid); } -static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; @@ -798,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = { .ndo_set_mac_address = virtnet_set_mac_address, .ndo_set_rx_mode = virtnet_set_rx_mode, .ndo_change_mtu = virtnet_change_mtu, - .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid, + .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = virtnet_netpoll, #endif -- cgit v1.1 From d0ab8ff81bf1b01bae7d6b92ca067badbbb02cc9 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Sat, 2 May 2009 13:48:32 -0700 Subject: net: Only store high 16 bits of kernel generated filter priorities The kernel should only be using the high 16 bits of a kernel generated priority. Filter priorities in all other cases only use the upper 16 bits of the u32 'prio' field of 'struct tcf_proto', but when the kernel generates the priority of a filter is saves all 32 bits which can result in incorrect lookup failures when a filter needs to be deleted or modified. Signed-off-by: Robert Love Signed-off-by: David S. Miller --- net/sched/cls_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 173fcc4..0759f32 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -254,7 +254,7 @@ replay: } tp->ops = tp_ops; tp->protocol = protocol; - tp->prio = nprio ? : tcf_auto_prio(*back); + tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back)); tp->q = q; tp->classify = tp_ops->classify; tp->classid = parent; -- cgit v1.1 From 902e5ea15f8471a3213a37b11b98196f3406aeaf Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sat, 2 May 2009 13:49:36 -0700 Subject: Subject: [PATCH] br2684: restore net_dev initialization Commit 0ba25ff4c669e5395110ba6ab4958a97a9f96922 ("br2684: convert to net_device_ops") inadvertently deleted the initialization of the net_dev pointer in the br2684_dev structure, leading to crashes. This patch adds it back. Reported-by: Mikko Vinni Tested-by: Mikko Vinni Signed-off-by: Rabin Vincent Signed-off-by: David S. Miller --- net/atm/br2684.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 334fcd4..3100a89 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -549,6 +549,7 @@ static void br2684_setup(struct net_device *netdev) struct br2684_dev *brdev = BRPRIV(netdev); ether_setup(netdev); + brdev->net_dev = netdev; netdev->netdev_ops = &br2684_netdev_ops; -- cgit v1.1 From 379b026ecc20c4657d37e40ead789f7f28f1a1c1 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 2 May 2009 13:52:13 -0700 Subject: ne2k-pci: Do not register device until initialized. Doing it in reverse order causes uevent to be sent before we have a MAC address, which confuses udev. Signed-off-by: Lubomir Rintel Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/ne2k-pci.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index eb66f65..7d83896 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, dev->ethtool_ops = &ne2k_pci_ethtool_ops; NS8390_init(dev, 0); + memcpy(dev->dev_addr, SA_prom, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + i = register_netdev(dev); if (i) goto err_out_free_netdev; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i]; printk("%s: %s found at %#lx, IRQ %d, %pM.\n", dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, dev->dev_addr); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - return 0; err_out_free_netdev: -- cgit v1.1 From 0b2febf38a33d7c40fb7bb4a58c113a1fa33c412 Mon Sep 17 00:00:00 2001 From: Hannes Hering Date: Mon, 4 May 2009 11:06:37 -0700 Subject: ehea: fix invalid pointer access This patch fixes an invalid pointer access in case the receive queue holds no pointer to the next skb when the queue is empty. Signed-off-by: Hannes Hering Signed-off-by: Jan-Bernd Themann Signed-off-by: David S. Miller --- drivers/net/ehea/ehea.h | 2 +- drivers/net/ehea/ehea_main.c | 31 ++++++++++++++++++------------- 2 files changed, 19 insertions(+), 14 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 6e317ca..16a4138 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0100" +#define DRV_VERSION "EHEA_0101" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 604c844..b22dab9 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); - - pref = (skb_array[x]->data); - prefetch(pref); - prefetch(pref + EHEA_CACHE_LINE); - prefetch(pref + EHEA_CACHE_LINE * 2); - prefetch(pref + EHEA_CACHE_LINE * 3); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + + pref = (skb_array[x]->data); + prefetch(pref); + prefetch(pref + EHEA_CACHE_LINE); + prefetch(pref + EHEA_CACHE_LINE * 2); + prefetch(pref + EHEA_CACHE_LINE * 3); + } + skb = skb_array[skb_index]; skb_array[skb_index] = NULL; return skb; @@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); - pref = (skb_array[x]->data); - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + pref = (skb_array[x]->data); + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + } skb = skb_array[wqe_index]; skb_array[wqe_index] = NULL; -- cgit v1.1 From 0c266898b42fe4e4e2f9edfc9d3474c10f93aa6a Mon Sep 17 00:00:00 2001 From: Satoru SATOH Date: Mon, 4 May 2009 11:11:01 -0700 Subject: tcp: Fix tcp_prequeue() to get correct rto_min value tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of the actual value might be tuned. The following patches fix this and make tcp_prequeue get the actual value returns from tcp_rto_min(). Signed-off-by: Satoru SATOH Signed-off-by: David S. Miller --- include/net/tcp.h | 14 +++++++++++++- net/ipv4/tcp_input.c | 10 ---------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 1b94b9b..646dbe3 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -530,6 +531,17 @@ static inline void tcp_fast_path_check(struct sock *sk) tcp_fast_path_on(tp); } +/* Compute the actual rto_min value */ +static inline u32 tcp_rto_min(struct sock *sk) +{ + struct dst_entry *dst = __sk_dst_get(sk); + u32 rto_min = TCP_RTO_MIN; + + if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) + rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); + return rto_min; +} + /* Compute the actual receive window we are currently advertising. * Rcv_nxt can be after the window if our peer push more data * than the offered window. @@ -895,7 +907,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) wake_up_interruptible(sk->sk_sleep); if (!inet_csk_ack_scheduled(sk)) inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * TCP_RTO_MIN) / 4, + (3 * tcp_rto_min(sk)) / 4, TCP_RTO_MAX); } return 1; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index c96a6bb..eec3e6f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -597,16 +597,6 @@ static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb) tcp_grow_window(sk, skb); } -static u32 tcp_rto_min(struct sock *sk) -{ - struct dst_entry *dst = __sk_dst_get(sk); - u32 rto_min = TCP_RTO_MIN; - - if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) - rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); - return rto_min; -} - /* Called to compute a smoothed rtt estimate. The data fed to this * routine either comes from timestamps, or from segments that were * known _not_ to have been retransmitted [see Karn/Partridge -- cgit v1.1 From 9f722c0978b04acba209f8ca1896ad05814bc3a3 Mon Sep 17 00:00:00 2001 From: Omar Laazimani Date: Mon, 4 May 2009 12:01:43 -0700 Subject: usbnet: CDC EEM support (v5) This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani Signed-off-by: David Brownell Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 14 ++ drivers/net/usb/Makefile | 1 + drivers/net/usb/cdc_eem.c | 381 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/usb/cdc.h | 3 + 4 files changed, 399 insertions(+) create mode 100644 drivers/net/usb/cdc_eem.c diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 8ee2103..dfc6cf7 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -180,6 +180,20 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_CDC_EEM + tristate "CDC EEM support" + depends on USB_USBNET && EXPERIMENTAL + help + This option supports devices conforming to the Communication Device + Class (CDC) Ethernet Emulation Model, a specification that's easy to + implement in device firmware. The CDC EEM specifications are available + from . + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. However, if the + IEEE 802 "local assignment" bit is set in the address, a "usbX" + name is used instead. + config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 88a87eeb3..c8aef62 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c new file mode 100644 index 0000000..80e0177 --- /dev/null +++ b/drivers/net/usb/cdc_eem.c @@ -0,0 +1,381 @@ +/* + * USB CDC EEM network interface driver + * Copyright (C) 2009 Oberthur Technologies + * by Omar Laazimani, Olivier Condemine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * This driver is an implementation of the CDC "Ethernet Emulation + * Model" (EEM) specification, which encapsulates Ethernet frames + * for transport over USB using a simpler USB device model than the + * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet"). + * + * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf + * + * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24, + * 2.6.27 and 2.6.30rc2 kernel. + * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel). + * build on 23-April-2009 + */ + +#define EEM_HEAD 2 /* 2 byte header */ + +/*-------------------------------------------------------------------------*/ + +static void eem_linkcmd_complete(struct urb *urb) +{ + dev_kfree_skb(urb->context); + usb_free_urb(urb); +} + +static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) +{ + struct urb *urb; + int status; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto fail; + + usb_fill_bulk_urb(urb, dev->udev, dev->out, + skb->data, skb->len, eem_linkcmd_complete, skb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + usb_free_urb(urb); +fail: + dev_kfree_skb(skb); + devwarn(dev, "link cmd failure\n"); + return; + } +} + +static int eem_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = 0; + + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + /* no jumbogram (16K) support for now */ + + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + + return 0; +} + +/* + * EEM permits packing multiple Ethernet frames into USB transfers + * (a "bundle"), but for TX we don't try to do that. + */ +static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 len = skb->len; + u32 crc = 0; + int padlen = 0; + + /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is + * zero, stick two bytes of zero length EEM packet on the end. + * Else the framework would add invalid single byte padding, + * since it can't know whether ZLPs will be handled right by + * all the relevant hardware and software. + */ + if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) + padlen += 2; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= ETH_FCS_LEN + padlen) + && (headroom >= EEM_HEAD)) + goto done; + + if ((headroom + tailroom) + > (EEM_HEAD + ETH_FCS_LEN + padlen)) { + skb->data = memmove(skb->head + + EEM_HEAD, + skb->data, + skb->len); + skb_set_tail_pointer(skb, len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + /* we don't use the "no Ethernet CRC" option */ + crc = crc32_le(~0, skb->data, skb->len); + crc = ~crc; + + put_unaligned_le32(crc, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (1 == valid Ethernet CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); + + /* Bundle a zero length EEM packet if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. But we + * may have received multiple EEM payloads, or command payloads. + * So we must process _everything_ as if it's a header, except + * maybe the last data payload + * + * REVISIT the framework needs updating so that when we consume + * all payloads (the last or only message was a command, or a + * zero length EEM packet) that is not accounted as an rx_error. + */ + do { + struct sk_buff *skb2 = NULL; + u16 header; + u16 len = 0; + + /* incomplete EEM header? */ + if (skb->len < EEM_HEAD) + return 0; + + /* + * EEM packet header format: + * b0..14: EEM type dependant (Data or Command) + * b15: bmType + */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HEAD); + + /* + * The bmType bit helps to denote when EEM + * packet is data or command : + * bmType = 0 : EEM data payload + * bmType = 1 : EEM (link) command + */ + if (header & BIT(15)) { + u16 bmEEMCmd; + + /* + * EEM (link) command packet: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: bmReserved (must be 0) + * b15: 1 (EEM command) + */ + if (header & BIT(14)) { + devdbg(dev, "reserved command %04x\n", header); + continue; + } + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + + /* Responding to echo requests is mandatory. */ + case 0: /* Echo command */ + len = header & 0x7FF; + + /* bogus command? */ + if (skb->len < len) + return 0; + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + goto next; + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | (1 << 11) | len, + skb_push(skb2, 2)); + eem_linkcmd(dev, skb2); + break; + + /* + * Host may choose to ignore hints. + * - suspend: peripheral ready to suspend + * - response: suggest N millisec polling + * - response complete: suggest N sec polling + */ + case 2: /* Suspend hint */ + case 3: /* Response hint */ + case 4: /* Response complete hint */ + continue; + + /* + * Hosts should never receive host-to-peripheral + * or reserved command codes; or responses to an + * echo command we didn't send. + */ + case 1: /* Echo response */ + case 5: /* Tickle */ + default: /* reserved */ + devwarn(dev, "unexpected link command %d\n", + bmEEMCmd); + continue; + } + + } else { + u32 crc, crc2; + int is_last; + + /* zero length EEM packet? */ + if (header == 0) + continue; + + /* + * EEM data packet header : + * b0..13: length of ethernet frame + * b14: bmCRC + * b15: 0 (EEM data) + */ + len = header & 0x3FFF; + + /* bogus EEM payload? */ + if (skb->len < len) + return 0; + + /* bogus ethernet frame? */ + if (len < (ETH_HLEN + ETH_FCS_LEN)) + goto next; + + /* + * Treat the last payload differently: framework + * code expects our "fixup" to have stripped off + * headers, so "skb" is a data packet (or error). + * Else if it's not the last payload, keep "skb" + * for further processing. + */ + is_last = (len == skb->len); + if (is_last) + skb2 = skb; + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + crc = get_unaligned_le32(skb2->data + + len - ETH_FCS_LEN); + skb_trim(skb2, len - ETH_FCS_LEN); + + /* + * The bmCRC helps to denote when the CRC field in + * the Ethernet frame contains a calculated CRC: + * bmCRC = 1 : CRC is calculated + * bmCRC = 0 : CRC = 0xDEADBEEF + */ + if (header & BIT(14)) + crc2 = ~crc32_le(~0, skb2->data, len); + else + crc2 = 0xdeadbeef; + + if (is_last) + return crc == crc2; + + if (unlikely(crc != crc2)) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb2); + } else + usbnet_skb_return(dev, skb2); + } + +next: + skb_pull(skb, len); + } while (skb->len); + + return 1; +} + +static const struct driver_info eem_info = { + .description = "CDC EEM Device", + .flags = FLAG_ETHER, + .bind = eem_bind, + .rx_fixup = eem_rx_fixup, + .tx_fixup = eem_tx_fixup, +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, + USB_CDC_PROTO_EEM), + .driver_info = (unsigned long) &eem_info, +}, +{ + /* EMPTY == end of list */ +}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver eem_driver = { + .name = "cdc_eem", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + + +static int __init eem_init(void) +{ + return usb_register(&eem_driver); +} +module_init(eem_init); + +static void __exit eem_exit(void) +{ + usb_deregister(&eem_driver); +} +module_exit(eem_exit); + +MODULE_AUTHOR("Omar Laazimani "); +MODULE_DESCRIPTION("USB CDC EEM"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed2..c24124a 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* -- cgit v1.1 From a67e899cf38ae542d1a028ccd021f9189f76fb74 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 2 May 2009 18:24:06 -0700 Subject: Bluetooth: Fix issue with sysfs handling for connections Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat Signed-off-by: Marcel Holtmann Tested-by: Justin P. Mattock Tested-by: Roger Quadros Tested-by: Marc Pignat --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_conn.c | 2 ++ net/bluetooth/hci_sysfs.c | 74 ++++++++++++++++++++++------------------ 3 files changed, 43 insertions(+), 34 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index be5bd71..73aead2 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -457,6 +457,7 @@ int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count); int hci_register_sysfs(struct hci_dev *hdev); void hci_unregister_sysfs(struct hci_dev *hdev); +void hci_conn_init_sysfs(struct hci_conn *conn); void hci_conn_add_sysfs(struct hci_conn *conn); void hci_conn_del_sysfs(struct hci_conn *conn); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 375f4b4..61309b2 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -248,6 +248,8 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) if (hdev->notify) hdev->notify(hdev, HCI_NOTIFY_CONN_ADD); + hci_conn_init_sysfs(conn); + tasklet_enable(&hdev->tx_task); return conn; diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index b7c5108..582d8877 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -9,7 +9,7 @@ struct class *bt_class = NULL; EXPORT_SYMBOL_GPL(bt_class); -static struct workqueue_struct *bluetooth; +static struct workqueue_struct *bt_workq; static inline char *link_typetostr(int type) { @@ -89,8 +89,8 @@ static void add_conn(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, work_add); - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous del is complete */ + flush_work(&conn->work_del); if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); @@ -98,27 +98,6 @@ static void add_conn(struct work_struct *work) } } -void hci_conn_add_sysfs(struct hci_conn *conn) -{ - struct hci_dev *hdev = conn->hdev; - - BT_DBG("conn %p", conn); - - conn->dev.type = &bt_link; - conn->dev.class = bt_class; - conn->dev.parent = &hdev->dev; - - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); - - dev_set_drvdata(&conn->dev, conn); - - device_initialize(&conn->dev); - - INIT_WORK(&conn->work_add, add_conn); - - queue_work(bluetooth, &conn->work_add); -} - /* * The rfcomm tty device will possibly retain even when conn * is down, and sysfs doesn't support move zombie device, @@ -134,8 +113,11 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous add is complete */ + flush_work(&conn->work_add); + + if (!device_is_registered(&conn->dev)) + return; while (1) { struct device *dev; @@ -152,16 +134,40 @@ static void del_conn(struct work_struct *work) hci_dev_put(hdev); } -void hci_conn_del_sysfs(struct hci_conn *conn) +void hci_conn_init_sysfs(struct hci_conn *conn) { + struct hci_dev *hdev = conn->hdev; + BT_DBG("conn %p", conn); - if (!device_is_registered(&conn->dev)) - return; + conn->dev.type = &bt_link; + conn->dev.class = bt_class; + conn->dev.parent = &hdev->dev; + + dev_set_drvdata(&conn->dev, conn); + device_initialize(&conn->dev); + + INIT_WORK(&conn->work_add, add_conn); INIT_WORK(&conn->work_del, del_conn); +} + +void hci_conn_add_sysfs(struct hci_conn *conn) +{ + struct hci_dev *hdev = conn->hdev; + + BT_DBG("conn %p", conn); + + dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + + queue_work(bt_workq, &conn->work_add); +} + +void hci_conn_del_sysfs(struct hci_conn *conn) +{ + BT_DBG("conn %p", conn); - queue_work(bluetooth, &conn->work_del); + queue_work(bt_workq, &conn->work_del); } static inline char *host_typetostr(int type) @@ -438,13 +444,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev) int __init bt_sysfs_init(void) { - bluetooth = create_singlethread_workqueue("bluetooth"); - if (!bluetooth) + bt_workq = create_singlethread_workqueue("bluetooth"); + if (!bt_workq) return -ENOMEM; bt_class = class_create(THIS_MODULE, "bluetooth"); if (IS_ERR(bt_class)) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); return PTR_ERR(bt_class); } @@ -453,7 +459,7 @@ int __init bt_sysfs_init(void) void bt_sysfs_cleanup(void) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); class_destroy(bt_class); } -- cgit v1.1 From 815bcc2719c12b6f5b511706e2d19728e07f0b02 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Mon, 4 May 2009 09:03:37 +0000 Subject: bonding: fix alb mode locking regression Fix locking issue in alb MAC address management; removed incorrect locking and replaced with correct locking. This bug was introduced in commit 059fe7a578fba5bbb0fdc0365bfcf6218fa25eb0 ("bonding: Convert locks to _bh, rework alb locking for new locking") Bug reported by Paul Smith , who also tested the fix. Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 553a899..46d312b 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave * Called with RTNL */ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) - __releases(&bond->curr_slave_lock) - __releases(&bond->lock) __acquires(&bond->lock) - __acquires(&bond->curr_slave_lock) + __releases(&bond->lock) { struct bonding *bond = netdev_priv(bond_dev); struct sockaddr *sa = addr; @@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) } } - write_unlock_bh(&bond->curr_slave_lock); - read_unlock(&bond->lock); - if (swap_slave) { alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave); alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave); @@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr, bond->alb_info.rlb_enabled); + read_lock(&bond->lock); alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); } + read_unlock(&bond->lock); } - read_lock(&bond->lock); - write_lock_bh(&bond->curr_slave_lock); - return 0; } -- cgit v1.1 From e151a60ad1faffb6241cf7eb6846353df1f33a32 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 4 May 2009 11:19:42 +0000 Subject: e1000: fix virtualization bug a recent fix to e1000 (commit 15b2bee2) caused KVM/QEMU/VMware based virtualized e1000 interfaces to begin failing when resetting. This is because the driver in a virtual environment doesn't get to run instructions *AT ALL* when an interrupt is asserted. The interrupt code runs immediately and this recent bug fix allows an interrupt to be possible when the interrupt handler will reject it (due to the new code), when being called from any path in the driver that holds the E1000_RESETTING flag. the driver should use the __E1000_DOWN flag instead of the __E1000_RESETTING flag to prevent interrupt execution while reconfiguring the hardware. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6a46cee..b1419e2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) + if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is -- cgit v1.1