From 77cd02c151cb6b7d81aad4802ee8b98a033863d6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 10 Apr 2013 13:23:50 +0100 Subject: fsl_udc: Don't use create_proc_read_entry() Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: David Howells cc: Li Yang cc: Felipe Balbi cc: Greg Kroah-Hartman cc: linux-usb@vger.kernel.org cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Al Viro --- drivers/usb/gadget/fsl_udc_core.c | 124 +++++++++++++------------------------- 1 file changed, 43 insertions(+), 81 deletions(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 04d5fef..ede70ff 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2038,47 +2038,37 @@ static int fsl_udc_stop(struct usb_gadget *g, static const char proc_filename[] = "driver/fsl_usb2_udc"; -static int fsl_proc_read(char *page, char **start, off_t off, int count, - int *eof, void *_dev) +static int fsl_proc_read(struct seq_file *m, void *v) { - char *buf = page; - char *next = buf; - unsigned size = count; unsigned long flags; - int t, i; + int i; u32 tmp_reg; struct fsl_ep *ep = NULL; struct fsl_req *req; struct fsl_udc *udc = udc_controller; - if (off != 0) - return 0; spin_lock_irqsave(&udc->lock, flags); /* ------basic driver information ---- */ - t = scnprintf(next, size, + seq_printf(m, DRIVER_DESC "\n" "%s version: %s\n" "Gadget driver: %s\n\n", driver_name, DRIVER_VERSION, udc->driver ? udc->driver->driver.name : "(none)"); - size -= t; - next += t; /* ------ DR Registers ----- */ tmp_reg = fsl_readl(&dr_regs->usbcmd); - t = scnprintf(next, size, + seq_printf(m, "USBCMD reg:\n" "SetupTW: %d\n" "Run/Stop: %s\n\n", (tmp_reg & USB_CMD_SUTW) ? 1 : 0, (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->usbsts); - t = scnprintf(next, size, + seq_printf(m, "USB Status Reg:\n" "Dr Suspend: %d Reset Received: %d System Error: %s " "USB Error Interrupt: %s\n\n", @@ -2086,11 +2076,9 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, (tmp_reg & USB_STS_RESET) ? 1 : 0, (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->usbintr); - t = scnprintf(next, size, + seq_printf(m, "USB Interrupt Enable Reg:\n" "Sleep Enable: %d SOF Received Enable: %d " "Reset Enable: %d\n" @@ -2104,33 +2092,25 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->frindex); - t = scnprintf(next, size, + seq_printf(m, "USB Frame Index Reg: Frame Number is 0x%x\n\n", (tmp_reg & USB_FRINDEX_MASKS)); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->deviceaddr); - t = scnprintf(next, size, + seq_printf(m, "USB Device Address Reg: Device Addr is 0x%x\n\n", (tmp_reg & USB_DEVICE_ADDRESS_MASK)); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); - t = scnprintf(next, size, + seq_printf(m, "USB Endpoint List Address Reg: " "Device Addr is 0x%x\n\n", (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->portsc1); - t = scnprintf(next, size, + seq_printf(m, "USB Port Status&Control Reg:\n" "Port Transceiver Type : %s Port Speed: %s\n" "PHY Low Power Suspend: %s Port Reset: %s " @@ -2139,7 +2119,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, "Port Enable/Disable Change: %s\n" "Port Enabled/Disabled: %s " "Current Connect Status: %s\n\n", ( { - char *s; + const char *s; switch (tmp_reg & PORTSCX_PTS_FSLS) { case PORTSCX_PTS_UTMI: s = "UTMI"; break; @@ -2165,13 +2145,11 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, "Not correct", (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? "Attached" : "Not-Att"); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->usbmode); - t = scnprintf(next, size, + seq_printf(m, "USB Mode Reg: Controller Mode is: %s\n\n", ( { - char *s; + const char *s; switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { case USB_MODE_CTRL_MODE_IDLE: s = "Idle"; break; @@ -2184,103 +2162,87 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, } s; } )); - size -= t; - next += t; tmp_reg = fsl_readl(&dr_regs->endptsetupstat); - t = scnprintf(next, size, + seq_printf(m, "Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n", (tmp_reg & EP_SETUP_STATUS_MASK)); - size -= t; - next += t; for (i = 0; i < udc->max_ep / 2; i++) { tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); - t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n", - i, tmp_reg); - size -= t; - next += t; + seq_printf(m, "EP Ctrl Reg [0x%x]: = [0x%x]\n", i, tmp_reg); } tmp_reg = fsl_readl(&dr_regs->endpointprime); - t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n\n", tmp_reg); - size -= t; - next += t; + seq_printf(m, "EP Prime Reg = [0x%x]\n\n", tmp_reg); #ifndef CONFIG_ARCH_MXC if (udc->pdata->have_sysif_regs) { tmp_reg = usb_sys_regs->snoop1; - t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg); - size -= t; - next += t; + seq_printf(m, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg); tmp_reg = usb_sys_regs->control; - t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n", - tmp_reg); - size -= t; - next += t; + seq_printf(m, "General Control Reg : = [0x%x]\n\n", tmp_reg); } #endif /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ ep = &udc->eps[0]; - t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n", + seq_printf(m, "For %s Maxpkt is 0x%x index is 0x%x\n", ep->ep.name, ep_maxpacket(ep), ep_index(ep)); - size -= t; - next += t; if (list_empty(&ep->queue)) { - t = scnprintf(next, size, "its req queue is empty\n\n"); - size -= t; - next += t; + seq_puts(m, "its req queue is empty\n\n"); } else { list_for_each_entry(req, &ep->queue, queue) { - t = scnprintf(next, size, + seq_printf(m, "req %p actual 0x%x length 0x%x buf %p\n", &req->req, req->req.actual, req->req.length, req->req.buf); - size -= t; - next += t; } } /* other gadget->eplist ep */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { if (ep->ep.desc) { - t = scnprintf(next, size, + seq_printf(m, "\nFor %s Maxpkt is 0x%x " "index is 0x%x\n", ep->ep.name, ep_maxpacket(ep), ep_index(ep)); - size -= t; - next += t; if (list_empty(&ep->queue)) { - t = scnprintf(next, size, - "its req queue is empty\n\n"); - size -= t; - next += t; + seq_puts(m, "its req queue is empty\n\n"); } else { list_for_each_entry(req, &ep->queue, queue) { - t = scnprintf(next, size, + seq_printf(m, "req %p actual 0x%x length " "0x%x buf %p\n", &req->req, req->req.actual, req->req.length, req->req.buf); - size -= t; - next += t; - } /* end for each_entry of ep req */ - } /* end for else */ - } /* end for if(ep->queue) */ - } /* end (ep->desc) */ + } /* end for each_entry of ep req */ + } /* end for else */ + } /* end for if(ep->queue) */ + } /* end (ep->desc) */ spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} - *eof = 1; - return count - size; +/* + * seq_file wrappers for procfile show routines. + */ +static int fsl_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, fsl_proc_read, NULL); } -#define create_proc_file() create_proc_read_entry(proc_filename, \ - 0, NULL, fsl_proc_read, NULL) +static const struct file_operations fsl_proc_fops = { + .open = fsl_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#define create_proc_file() proc_create(proc_filename, 0, NULL, &fsl_proc_fops) #define remove_proc_file() remove_proc_entry(proc_filename, NULL) #else /* !CONFIG_USB_GADGET_DEBUG_FILES */ -- cgit v1.1