From a519c27da6e8a4e74df2fde5654ea9a42dda9fcb Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Thu, 5 Nov 2015 13:17:57 +0800 Subject: dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible This patchset attempts to new compatible for thermal founding on RK3368 SoCs. Signed-off-by: Caesar Wang Acked-by: Rob Herring Signed-off-by: Eduardo Valentin --- Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index b38200d..0dfa60d 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -1,7 +1,9 @@ * Temperature Sensor ADC (TSADC) on rockchip SoCs Required properties: -- compatible : "rockchip,rk3288-tsadc" +- compatible : should be "rockchip,-tsadc" + "rockchip,rk3288-tsadc": found on RK3288 SoCs + "rockchip,rk3368-tsadc": found on RK3368 SoCs - reg : physical base address of the controller and length of memory mapped region. - interrupts : The interrupt number to the cpu. The interrupt specifier format -- cgit v1.1 From 1d98b618cc0d8d65650ac0de88c93c98013b1166 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Thu, 5 Nov 2015 13:17:58 +0800 Subject: thermal: rockchip: better to compatible the driver for different SoCs The current driver is default to register the two thermal sensors in probe since some SoCs maybe only have one sensor for thermal. In some cases, the channel 0 is not always the cpu or gpu sensor. So add the channel can be configured for sensors. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 86 +++++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 38 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 9787e8a..e72a69d 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -45,15 +45,25 @@ enum tshut_polarity { }; /** - * The system has three Temperature Sensors. channel 0 is reserved, - * channel 1 is for CPU, and channel 2 is for GPU. + * The system has two Temperature Sensors. + * sensor0 is for CPU, and sensor1 is for GPU. */ enum sensor_id { - SENSOR_CPU = 1, + SENSOR_CPU = 0, SENSOR_GPU, }; +/** + * The max sensors is two in rockchip SoCs. + * Two sensors: CPU and GPU sensor. + */ +#define SOC_MAX_SENSORS 2 + struct rockchip_tsadc_chip { + /* The sensor id of chip correspond to the ADC channel */ + int chn_id[SOC_MAX_SENSORS]; + int chn_num; + /* The hardware-controlled tshut property */ long tshut_temp; enum tshut_mode tshut_mode; @@ -73,17 +83,15 @@ struct rockchip_tsadc_chip { struct rockchip_thermal_sensor { struct rockchip_thermal_data *thermal; struct thermal_zone_device *tzd; - enum sensor_id id; + int id; }; -#define NUM_SENSORS 2 /* Ignore unused sensor 0 */ - struct rockchip_thermal_data { const struct rockchip_tsadc_chip *chip; struct platform_device *pdev; struct reset_control *reset; - struct rockchip_thermal_sensor sensors[NUM_SENSORS]; + struct rockchip_thermal_sensor sensors[SOC_MAX_SENSORS]; struct clk *clk; struct clk *pclk; @@ -95,7 +103,7 @@ struct rockchip_thermal_data { enum tshut_polarity tshut_polarity; }; -/* TSADC V2 Sensor info define: */ +/* TSADC Sensor info define: */ #define TSADCV2_AUTO_CON 0x04 #define TSADCV2_INT_EN 0x08 #define TSADCV2_INT_PD 0x0c @@ -318,6 +326,10 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs, } static const struct rockchip_tsadc_chip rk3288_tsadc_data = { + .chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */ + .chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */ + .chn_num = 2, /* two channels for tsadc */ + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ .tshut_temp = 95000, @@ -357,7 +369,7 @@ static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev) thermal->chip->irq_ack(thermal->regs); - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + for (i = 0; i < thermal->chip->chn_num; i++) thermal_zone_device_update(thermal->sensors[i].tzd); return IRQ_HANDLED; @@ -442,7 +454,7 @@ static int rockchip_thermal_register_sensor(struct platform_device *pdev, struct rockchip_thermal_data *thermal, struct rockchip_thermal_sensor *sensor, - enum sensor_id id) + int id) { const struct rockchip_tsadc_chip *tsadc = thermal->chip; int error; @@ -481,7 +493,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev) const struct of_device_id *match; struct resource *res; int irq; - int i; + int i, j; int error; match = of_match_node(of_rockchip_thermal_match, np); @@ -556,22 +568,19 @@ static int rockchip_thermal_probe(struct platform_device *pdev) thermal->chip->initialize(thermal->regs, thermal->tshut_polarity); - error = rockchip_thermal_register_sensor(pdev, thermal, - &thermal->sensors[0], - SENSOR_CPU); - if (error) { - dev_err(&pdev->dev, - "failed to register CPU thermal sensor: %d\n", error); - goto err_disable_pclk; - } - - error = rockchip_thermal_register_sensor(pdev, thermal, - &thermal->sensors[1], - SENSOR_GPU); - if (error) { - dev_err(&pdev->dev, - "failed to register GPU thermal sensor: %d\n", error); - goto err_unregister_cpu_sensor; + for (i = 0; i < thermal->chip->chn_num; i++) { + error = rockchip_thermal_register_sensor(pdev, thermal, + &thermal->sensors[i], + thermal->chip->chn_id[i]); + if (error) { + dev_err(&pdev->dev, + "failed to register sensor[%d] : error = %d\n", + i, error); + for (j = 0; j < i; j++) + thermal_zone_of_sensor_unregister(&pdev->dev, + thermal->sensors[j].tzd); + goto err_disable_pclk; + } } error = devm_request_threaded_irq(&pdev->dev, irq, NULL, @@ -581,22 +590,23 @@ static int rockchip_thermal_probe(struct platform_device *pdev) if (error) { dev_err(&pdev->dev, "failed to request tsadc irq: %d\n", error); - goto err_unregister_gpu_sensor; + goto err_unregister_sensor; } thermal->chip->control(thermal->regs, true); - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + for (i = 0; i < thermal->chip->chn_num; i++) rockchip_thermal_toggle_sensor(&thermal->sensors[i], true); platform_set_drvdata(pdev, thermal); return 0; -err_unregister_gpu_sensor: - thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[1].tzd); -err_unregister_cpu_sensor: - thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[0].tzd); +err_unregister_sensor: + while (i--) + thermal_zone_of_sensor_unregister(&pdev->dev, + thermal->sensors[i].tzd); + err_disable_pclk: clk_disable_unprepare(thermal->pclk); err_disable_clk: @@ -610,7 +620,7 @@ static int rockchip_thermal_remove(struct platform_device *pdev) struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev); int i; - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) { + for (i = 0; i < thermal->chip->chn_num; i++) { struct rockchip_thermal_sensor *sensor = &thermal->sensors[i]; rockchip_thermal_toggle_sensor(sensor, false); @@ -631,7 +641,7 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev) struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev); int i; - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + for (i = 0; i < thermal->chip->chn_num; i++) rockchip_thermal_toggle_sensor(&thermal->sensors[i], false); thermal->chip->control(thermal->regs, false); @@ -663,8 +673,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev) thermal->chip->initialize(thermal->regs, thermal->tshut_polarity); - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) { - enum sensor_id id = thermal->sensors[i].id; + for (i = 0; i < thermal->chip->chn_num; i++) { + int id = thermal->sensors[i].id; thermal->chip->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); @@ -674,7 +684,7 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev) thermal->chip->control(thermal->regs, true); - for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + for (i = 0; i < thermal->chip->chn_num; i++) rockchip_thermal_toggle_sensor(&thermal->sensors[i], true); pinctrl_pm_select_default_state(dev); -- cgit v1.1 From 144c5565c22a392cf2917b40754fc88109765f07 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Thu, 5 Nov 2015 13:17:59 +0800 Subject: thermal: rockchip: trivial: fix typo in commit Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index e72a69d..907a317 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -237,15 +237,19 @@ static int rk_tsadcv2_code_to_temp(u32 code, int *temp) } /** - * rk_tsadcv2_initialize - initialize TASDC Controller - * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between - * every two accessing of TSADC in normal operation. - * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between - * every two accessing of TSADC after the temperature is higher - * than COM_SHUT or COM_INT. - * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE, - * if the temperature is higher than COMP_INT or COMP_SHUT for - * "debounce" times, TSADC controller will generate interrupt or TSHUT. + * rk_tsadcv2_initialize - initialize TASDC Controller. + * + * (1) Set TSADC_V2_AUTO_PERIOD: + * Configure the interleave between every two accessing of + * TSADC in normal operation. + * + * (2) Set TSADCV2_AUTO_PERIOD_HT: + * Configure the interleave between every two accessing of + * TSADC after the temperature is higher than COM_SHUT or COM_INT. + * + * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE: + * If the temperature is higher than COMP_INT or COMP_SHUT for + * "debounce" times, TSADC controller will generate interrupt or TSHUT. */ static void rk_tsadcv2_initialize(void __iomem *regs, enum tshut_polarity tshut_polarity) -- cgit v1.1 From ce74110d5ed513b1b4f6e2eb4b7703f4163852bc Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 9 Nov 2015 12:48:56 +0800 Subject: thermal: rockchip: improve the conversion function We should make the conversion table in as a parameter since the different SoCs have the different conversionion table. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 82 +++++++++++++++++++++++++------------- 1 file changed, 55 insertions(+), 27 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 907a317..bbf082c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -59,6 +59,16 @@ enum sensor_id { */ #define SOC_MAX_SENSORS 2 +struct chip_tsadc_table { + const struct tsadc_table *id; + + /* the array table size*/ + unsigned int length; + + /* that analogic mask data */ + u32 data_mask; +}; + struct rockchip_tsadc_chip { /* The sensor id of chip correspond to the ADC channel */ int chn_id[SOC_MAX_SENSORS]; @@ -75,9 +85,14 @@ struct rockchip_tsadc_chip { void (*control)(void __iomem *reg, bool on); /* Per-sensor methods */ - int (*get_temp)(int chn, void __iomem *reg, int *temp); - void (*set_tshut_temp)(int chn, void __iomem *reg, long temp); + int (*get_temp)(struct chip_tsadc_table table, + int chn, void __iomem *reg, int *temp); + void (*set_tshut_temp)(struct chip_tsadc_table table, + int chn, void __iomem *reg, long temp); void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); + + /* Per-table methods */ + struct chip_tsadc_table table; }; struct rockchip_thermal_sensor { @@ -173,21 +188,22 @@ static const struct tsadc_table v2_code_table[] = { {3421, 125000}, }; -static u32 rk_tsadcv2_temp_to_code(long temp) +static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, + long temp) { int high, low, mid; low = 0; - high = ARRAY_SIZE(v2_code_table) - 1; + high = table.length - 1; mid = (high + low) / 2; - if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp) + if (temp < table.id[low].temp || temp > table.id[high].temp) return 0; while (low <= high) { - if (temp == v2_code_table[mid].temp) - return v2_code_table[mid].code; - else if (temp < v2_code_table[mid].temp) + if (temp == table.id[mid].temp) + return table.id[mid].code; + else if (temp < table.id[mid].temp) high = mid - 1; else low = mid + 1; @@ -197,25 +213,26 @@ static u32 rk_tsadcv2_temp_to_code(long temp) return 0; } -static int rk_tsadcv2_code_to_temp(u32 code, int *temp) +static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, + int *temp) { unsigned int low = 1; - unsigned int high = ARRAY_SIZE(v2_code_table) - 1; + unsigned int high = table.length - 1; unsigned int mid = (low + high) / 2; unsigned int num; unsigned long denom; - BUILD_BUG_ON(ARRAY_SIZE(v2_code_table) < 2); + WARN_ON(table.length < 2); - code &= TSADCV2_DATA_MASK; - if (code < v2_code_table[high].code) + code &= table.data_mask; + if (code < table.id[high].code) return -EAGAIN; /* Incorrect reading */ while (low <= high) { - if (code >= v2_code_table[mid].code && - code < v2_code_table[mid - 1].code) + if (code >= table.id[mid].code && + code < table.id[mid - 1].code) break; - else if (code < v2_code_table[mid].code) + else if (code < table.id[mid].code) low = mid + 1; else high = mid - 1; @@ -228,10 +245,10 @@ static int rk_tsadcv2_code_to_temp(u32 code, int *temp) * temperature between 2 table entries is linear and interpolate * to produce less granular result. */ - num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp; - num *= v2_code_table[mid - 1].code - code; - denom = v2_code_table[mid - 1].code - v2_code_table[mid].code; - *temp = v2_code_table[mid - 1].temp + (num / denom); + num = table.id[mid].temp - v2_code_table[mid - 1].temp; + num *= table.id[mid - 1].code - code; + denom = table.id[mid - 1].code - table.id[mid].code; + *temp = table.id[mid - 1].temp + (num / denom); return 0; } @@ -291,20 +308,22 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable) writel_relaxed(val, regs + TSADCV2_AUTO_CON); } -static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, int *temp) +static int rk_tsadcv2_get_temp(struct chip_tsadc_table table, + int chn, void __iomem *regs, int *temp) { u32 val; val = readl_relaxed(regs + TSADCV2_DATA(chn)); - return rk_tsadcv2_code_to_temp(val, temp); + return rk_tsadcv2_code_to_temp(table, val, temp); } -static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp) +static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table, + int chn, void __iomem *regs, long temp) { u32 tshut_value, val; - tshut_value = rk_tsadcv2_temp_to_code(temp); + tshut_value = rk_tsadcv2_temp_to_code(table, temp); writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn)); /* TSHUT will be valid */ @@ -344,6 +363,12 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { .get_temp = rk_tsadcv2_get_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, + + .table = { + .id = v2_code_table, + .length = ARRAY_SIZE(v2_code_table), + .data_mask = TSADCV2_DATA_MASK, + }, }; static const struct of_device_id of_rockchip_thermal_match[] = { @@ -386,7 +411,8 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp) const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip; int retval; - retval = tsadc->get_temp(sensor->id, thermal->regs, out_temp); + retval = tsadc->get_temp(tsadc->table, + sensor->id, thermal->regs, out_temp); dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n", sensor->id, *out_temp, retval); @@ -464,7 +490,8 @@ rockchip_thermal_register_sensor(struct platform_device *pdev, int error; tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp); + tsadc->set_tshut_temp(tsadc->table, id, thermal->regs, + thermal->tshut_temp); sensor->thermal = thermal; sensor->id = id; @@ -682,7 +709,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev) thermal->chip->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - thermal->chip->set_tshut_temp(id, thermal->regs, + thermal->chip->set_tshut_temp(thermal->chip->table, + id, thermal->regs, thermal->tshut_temp); } -- cgit v1.1 From 020ba95dbbbe83073a9728e046b4512b40896197 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 9 Nov 2015 12:48:57 +0800 Subject: thermal: rockchip: Add the sort mode for adc value increment or decrement The conversion table has the adc value and temperature. In fact, the adc value only has the increment or decrement mode in conversion table. Moment, we can add the sort mode to be better support the *code_to_temp* for differenr SoCs. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 68 +++++++++++++++++++++++++++++--------- 1 file changed, 53 insertions(+), 15 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index bbf082c..7c5b784 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -54,6 +54,16 @@ enum sensor_id { }; /** +* The conversion table has the adc value and temperature. +* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table) +* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table) +*/ +enum adc_sort_mode { + ADC_DECREMENT = 0, + ADC_INCREMENT, +}; + +/** * The max sensors is two in rockchip SoCs. * Two sensors: CPU and GPU sensor. */ @@ -67,6 +77,9 @@ struct chip_tsadc_table { /* that analogic mask data */ u32 data_mask; + + /* the sort mode is adc value that increment or decrement in table */ + enum adc_sort_mode mode; }; struct rockchip_tsadc_chip { @@ -224,19 +237,43 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, WARN_ON(table.length < 2); - code &= table.data_mask; - if (code < table.id[high].code) - return -EAGAIN; /* Incorrect reading */ - - while (low <= high) { - if (code >= table.id[mid].code && - code < table.id[mid - 1].code) - break; - else if (code < table.id[mid].code) - low = mid + 1; - else - high = mid - 1; - mid = (low + high) / 2; + switch (table.mode) { + case ADC_DECREMENT: + code &= table.data_mask; + if (code < table.id[high].code) + return -EAGAIN; /* Incorrect reading */ + + while (low <= high) { + if (code >= table.id[mid].code && + code < table.id[mid - 1].code) + break; + else if (code < table.id[mid].code) + low = mid + 1; + else + high = mid - 1; + + mid = (low + high) / 2; + } + break; + case ADC_INCREMENT: + code &= table.data_mask; + if (code < table.id[low].code) + return -EAGAIN; /* Incorrect reading */ + + while (low <= high) { + if (code >= table.id[mid - 1].code && + code < table.id[mid].code) + break; + else if (code > table.id[mid].code) + low = mid + 1; + else + high = mid - 1; + + mid = (low + high) / 2; + } + break; + default: + pr_err("Invalid the conversion table\n"); } /* @@ -246,8 +283,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, * to produce less granular result. */ num = table.id[mid].temp - v2_code_table[mid - 1].temp; - num *= table.id[mid - 1].code - code; - denom = table.id[mid - 1].code - table.id[mid].code; + num *= abs(table.id[mid - 1].code - code); + denom = abs(table.id[mid - 1].code - table.id[mid].code); *temp = table.id[mid - 1].temp + (num / denom); return 0; @@ -368,6 +405,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { .id = v2_code_table, .length = ARRAY_SIZE(v2_code_table), .data_mask = TSADCV2_DATA_MASK, + .mode = ADC_DECREMENT, }, }; -- cgit v1.1 From 437df2172e8d63b21b748ba1f3ac574451a51440 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 9 Nov 2015 12:48:58 +0800 Subject: thermal: rockchip: consistently use int for temperatures As Temperature is currently represented as int not long in the thermal framework since use int intead of unsigned long/long to represent temperature to avoid bogus overheat detection when negative temperature reported. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 7c5b784..73d47f8 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -88,7 +88,7 @@ struct rockchip_tsadc_chip { int chn_num; /* The hardware-controlled tshut property */ - long tshut_temp; + int tshut_temp; enum tshut_mode tshut_mode; enum tshut_polarity tshut_polarity; @@ -101,7 +101,7 @@ struct rockchip_tsadc_chip { int (*get_temp)(struct chip_tsadc_table table, int chn, void __iomem *reg, int *temp); void (*set_tshut_temp)(struct chip_tsadc_table table, - int chn, void __iomem *reg, long temp); + int chn, void __iomem *reg, int temp); void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); /* Per-table methods */ @@ -126,7 +126,7 @@ struct rockchip_thermal_data { void __iomem *regs; - long tshut_temp; + int tshut_temp; enum tshut_mode tshut_mode; enum tshut_polarity tshut_polarity; }; @@ -160,7 +160,7 @@ struct rockchip_thermal_data { struct tsadc_table { u32 code; - long temp; + int temp; }; static const struct tsadc_table v2_code_table[] = { @@ -202,7 +202,7 @@ static const struct tsadc_table v2_code_table[] = { }; static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, - long temp) + int temp) { int high, low, mid; @@ -356,7 +356,7 @@ static int rk_tsadcv2_get_temp(struct chip_tsadc_table table, } static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table, - int chn, void __iomem *regs, long temp) + int chn, void __iomem *regs, int temp) { u32 tshut_value, val; @@ -469,7 +469,7 @@ static int rockchip_configure_from_dt(struct device *dev, if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) { dev_warn(dev, - "Missing tshut temp property, using default %ld\n", + "Missing tshut temp property, using default %d\n", thermal->chip->tshut_temp); thermal->tshut_temp = thermal->chip->tshut_temp; } else { @@ -477,7 +477,7 @@ static int rockchip_configure_from_dt(struct device *dev, } if (thermal->tshut_temp > INT_MAX) { - dev_err(dev, "Invalid tshut temperature specified: %ld\n", + dev_err(dev, "Invalid tshut temperature specified: %d\n", thermal->tshut_temp); return -ERANGE; } -- cgit v1.1 From 20f0af759d79c53a818da5c953874c9e801f726a Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 9 Nov 2015 12:48:59 +0800 Subject: thermal: rockchip: Support the RK3368 SoCs in thermal driver The RK3368 SoCs support to 2 channel TS-ADC, the temperature criteria of each channel can be configurable. The system has two Temperature Sensors, channel 0 is for CPU, and channel 1 is for GPU. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 72 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 73d47f8..e845841 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -1,6 +1,9 @@ /* * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * + * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd + * Caesar Wang + * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. @@ -153,6 +156,8 @@ struct rockchip_thermal_data { #define TSADCV2_INT_PD_CLEAR_MASK ~BIT(8) #define TSADCV2_DATA_MASK 0xfff +#define TSADCV3_DATA_MASK 0x3ff + #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4 #define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */ @@ -201,6 +206,45 @@ static const struct tsadc_table v2_code_table[] = { {3421, 125000}, }; +static const struct tsadc_table v3_code_table[] = { + {0, -40000}, + {106, -40000}, + {108, -35000}, + {110, -30000}, + {112, -25000}, + {114, -20000}, + {116, -15000}, + {118, -10000}, + {120, -5000}, + {122, 0}, + {124, 5000}, + {126, 10000}, + {128, 15000}, + {130, 20000}, + {132, 25000}, + {134, 30000}, + {136, 35000}, + {138, 40000}, + {140, 45000}, + {142, 50000}, + {144, 55000}, + {146, 60000}, + {148, 65000}, + {150, 70000}, + {152, 75000}, + {154, 80000}, + {156, 85000}, + {158, 90000}, + {160, 95000}, + {162, 100000}, + {163, 105000}, + {165, 110000}, + {167, 115000}, + {169, 120000}, + {171, 125000}, + {TSADCV3_DATA_MASK, 125000}, +}; + static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, int temp) { @@ -409,11 +453,39 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { }, }; +static const struct rockchip_tsadc_chip rk3368_tsadc_data = { + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ + .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */ + .chn_num = 2, /* two channels for tsadc */ + + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ + .tshut_temp = 95000, + + .initialize = rk_tsadcv2_initialize, + .irq_ack = rk_tsadcv2_irq_ack, + .control = rk_tsadcv2_control, + .get_temp = rk_tsadcv2_get_temp, + .set_tshut_temp = rk_tsadcv2_tshut_temp, + .set_tshut_mode = rk_tsadcv2_tshut_mode, + + .table = { + .id = v3_code_table, + .length = ARRAY_SIZE(v3_code_table), + .data_mask = TSADCV3_DATA_MASK, + .mode = ADC_INCREMENT, + }, +}; + static const struct of_device_id of_rockchip_thermal_match[] = { { .compatible = "rockchip,rk3288-tsadc", .data = (void *)&rk3288_tsadc_data, }, + { + .compatible = "rockchip,rk3368-tsadc", + .data = (void *)&rk3368_tsadc_data, + }, { /* end */ }, }; MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match); -- cgit v1.1 From bb404db47b8a4ade8c85d13fb44908b0ee15483c Mon Sep 17 00:00:00 2001 From: Kapileshwar Singh Date: Tue, 13 Oct 2015 12:30:01 +0100 Subject: thermal: power_allocator: Use temperature reading from tz All thermal governors use the temperature value stored in struct thermal_zone_device. thermal_zone_device->temperature power_allocator governor should not deviate from this and use the same. Cc: Javi Merino Cc: Eduardo Valentin Cc: Daniel Kurtz Cc: Zhang Rui Cc: Dmitry Torokhov Cc: Sascha Hauer Cc: Andrea Arcangeli Acked-by: Javi Merino Reported-by: Sugumar Natarajan Signed-off-by: Kapileshwar Singh Signed-off-by: Eduardo Valentin --- drivers/thermal/power_allocator.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c index f0fbea3..1246aa6 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -174,7 +174,6 @@ static void estimate_pid_constants(struct thermal_zone_device *tz, /** * pid_controller() - PID controller * @tz: thermal zone we are operating in - * @current_temp: the current temperature in millicelsius * @control_temp: the target temperature in millicelsius * @max_allocatable_power: maximum allocatable power for this thermal zone * @@ -191,7 +190,6 @@ static void estimate_pid_constants(struct thermal_zone_device *tz, * Return: The power budget for the next period. */ static u32 pid_controller(struct thermal_zone_device *tz, - int current_temp, int control_temp, u32 max_allocatable_power) { @@ -211,7 +209,7 @@ static u32 pid_controller(struct thermal_zone_device *tz, true); } - err = control_temp - current_temp; + err = control_temp - tz->temperature; err = int_to_frac(err); /* Calculate the proportional term */ @@ -332,7 +330,6 @@ static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors, } static int allocate_power(struct thermal_zone_device *tz, - int current_temp, int control_temp) { struct thermal_instance *instance; @@ -418,8 +415,7 @@ static int allocate_power(struct thermal_zone_device *tz, i++; } - power_range = pid_controller(tz, current_temp, control_temp, - max_allocatable_power); + power_range = pid_controller(tz, control_temp, max_allocatable_power); divvy_up_power(weighted_req_power, max_power, num_actors, total_weighted_req_power, power_range, granted_power, @@ -444,8 +440,8 @@ static int allocate_power(struct thermal_zone_device *tz, trace_thermal_power_allocator(tz, req_power, total_req_power, granted_power, total_granted_power, num_actors, power_range, - max_allocatable_power, current_temp, - control_temp - current_temp); + max_allocatable_power, tz->temperature, + control_temp - tz->temperature); kfree(req_power); unlock: @@ -612,7 +608,7 @@ static void power_allocator_unbind(struct thermal_zone_device *tz) static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) { int ret; - int switch_on_temp, control_temp, current_temp; + int switch_on_temp, control_temp; struct power_allocator_params *params = tz->governor_data; /* @@ -622,15 +618,9 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) if (trip != params->trip_max_desired_temperature) return 0; - ret = thermal_zone_get_temp(tz, ¤t_temp); - if (ret) { - dev_warn(&tz->device, "Failed to get temperature: %d\n", ret); - return ret; - } - ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, &switch_on_temp); - if (!ret && (current_temp < switch_on_temp)) { + if (!ret && (tz->temperature < switch_on_temp)) { tz->passive = 0; reset_pid_controller(params); allow_maximum_power(tz); @@ -648,7 +638,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) return ret; } - return allocate_power(tz, current_temp, control_temp); + return allocate_power(tz, control_temp); } static struct thermal_governor thermal_gov_power_allocator = { -- cgit v1.1 From 285249884ec19480f99c011d223760bb1fc865a2 Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Mon, 16 Nov 2015 17:10:05 +0900 Subject: thermal: of-thermal: Reduce log level for message when can't fine thermal zone Some systems register thermal zone by themself and don't need to have thermal zones node in DT. Therefore reduce the log level from ERROR to DEBUG when thermal zone node can't be find in of_thermal_destroy_zones(). Signed-off-by: Jiada Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/of-thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 42b7d42..be4eedc 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -964,7 +964,7 @@ void of_thermal_destroy_zones(void) np = of_find_node_by_name(NULL, "thermal-zones"); if (!np) { - pr_err("unable to find thermal zones\n"); + pr_debug("unable to find thermal zones\n"); return; } -- cgit v1.1 From 84f0e490bee0684bd00c8ee02b15487d58bcea9f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Nov 2015 02:12:06 +0000 Subject: thermal: rcar_thermal: remove redundant operation Probe error operation and remove operation are same. Let's use same function. Signed-off-by: Kuninori Morimoto Signed-off-by: Eduardo Valentin --- drivers/thermal/rcar_thermal.c | 49 ++++++++++++++++++------------------------ 1 file changed, 21 insertions(+), 28 deletions(-) diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 5d4ae7d..13d01ed 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -361,6 +361,24 @@ static irqreturn_t rcar_thermal_irq(int irq, void *data) /* * platform functions */ +static int rcar_thermal_remove(struct platform_device *pdev) +{ + struct rcar_thermal_common *common = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + struct rcar_thermal_priv *priv; + + rcar_thermal_for_each_priv(priv, common) { + if (rcar_has_irq_support(priv)) + rcar_thermal_irq_disable(priv); + thermal_zone_device_unregister(priv->zone); + } + + pm_runtime_put(dev); + pm_runtime_disable(dev); + + return 0; +} + static int rcar_thermal_probe(struct platform_device *pdev) { struct rcar_thermal_common *common; @@ -377,6 +395,8 @@ static int rcar_thermal_probe(struct platform_device *pdev) if (!common) return -ENOMEM; + platform_set_drvdata(pdev, common); + INIT_LIST_HEAD(&common->head); spin_lock_init(&common->lock); common->dev = dev; @@ -454,43 +474,16 @@ static int rcar_thermal_probe(struct platform_device *pdev) rcar_thermal_common_write(common, ENR, enr_bits); } - platform_set_drvdata(pdev, common); - dev_info(dev, "%d sensor probed\n", i); return 0; error_unregister: - rcar_thermal_for_each_priv(priv, common) { - if (rcar_has_irq_support(priv)) - rcar_thermal_irq_disable(priv); - thermal_zone_device_unregister(priv->zone); - } - - pm_runtime_put(dev); - pm_runtime_disable(dev); + rcar_thermal_remove(pdev); return ret; } -static int rcar_thermal_remove(struct platform_device *pdev) -{ - struct rcar_thermal_common *common = platform_get_drvdata(pdev); - struct device *dev = &pdev->dev; - struct rcar_thermal_priv *priv; - - rcar_thermal_for_each_priv(priv, common) { - if (rcar_has_irq_support(priv)) - rcar_thermal_irq_disable(priv); - thermal_zone_device_unregister(priv->zone); - } - - pm_runtime_put(dev); - pm_runtime_disable(dev); - - return 0; -} - static const struct of_device_id rcar_thermal_dt_ids[] = { { .compatible = "renesas,rcar-thermal", }, {}, -- cgit v1.1 From e4217468ae72a02e5d4f33d517a32a8c48b91c44 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 16 Nov 2015 22:43:50 +0100 Subject: Revert "thermal: qcom_spmi: allow compile test" This just caused build errors: warning: (QCOM_SPMI_TEMP_ALARM) selects REGMAP_SPMI which has unmet direct dependencies (SPMI) drivers/built-in.o: In function `regmap_spmi_ext_gather_write': :(.text+0x609b0): undefined reference to `spmi_ext_register_write' :(.text+0x609f0): undefined reference to `spmi_ext_register_writel' While it's generally a good idea to allow compile testing, in this case, it just doesn't work, so reverting the patch that introduced the compile-test variant seems the most appropriate solution. Note that SPMI also has a 'depends on ARCH_QCOM || COMPILE_TEST' statement, so we should be able to enable SPMI on all architectures for compile testing already. Signed-off-by: Arnd Bergmann Fixes: cb7fb4d34202 ("thermal: qcom_spmi: allow compile test") Signed-off-by: Eduardo Valentin --- drivers/thermal/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index c463c89..8cc4ac6 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -382,7 +382,7 @@ endmenu config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" - depends on OF && (SPMI || COMPILE_TEST) && IIO + depends on OF && SPMI && IIO select REGMAP_SPMI help This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) -- cgit v1.1 From c86b3de8c8b02d7e474fdc002c8df533b844524c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 17 Nov 2015 17:48:52 +0100 Subject: thermal: fix thermal_zone_bind_cooling_device prototype When the prototype for thermal_zone_bind_cooling_device changed, the static inline wrapper function was left alone, which in theory can cause build warnings: I have seen this error in the past: drivers/thermal/db8500_thermal.c: In function 'db8500_cdev_bind': drivers/thermal/db8500_thermal.c:78:9: error: too many arguments to function 'thermal_zone_bind_cooling_device' ret = thermal_zone_bind_cooling_device(thermal, i, cdev, while this one no longer shows up, there is no doubt that the prototype is still wrong, so let's just fix it anyway. Signed-off-by: Arnd Bergmann Fixes: 6cd9e9f629f1 ("thermal: of: fix cooling device weights in device tree") Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 4014a59..613c29b 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -438,7 +438,8 @@ static inline void thermal_zone_device_unregister( static inline int thermal_zone_bind_cooling_device( struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower) + unsigned long upper, unsigned long lower, + unsigned int weight) { return -ENODEV; } static inline int thermal_zone_unbind_cooling_device( struct thermal_zone_device *tz, int trip, -- cgit v1.1 From a2291badc355d58ead5c19ae0609468947416040 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 19 Nov 2015 06:49:40 -0800 Subject: imx: thermal: use CPU temperature grade info for thresholds The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP which is valid for all IMX6 SoC's (despite the fact that the IMXSDLRM and IMXSXRM do not document this - this has been proven via tests as well as verified by Freescale FAE). Instead of assuming a fixed 85C for passive cooling threshold and 105C for critical use the thermal grade for these configurations. We will set the critical to maxT - 5C and passive to maxT - 10C. Cc: Anson Huang Cc: Fabio Estevam Acked-by: Shawn Guo Acked-by: Jon Nettleton Signed-off-by: Tim Harvey ---- v3: - rebase against linux-soc-thermal.git - added ack's from Shawn and Jon v2: - remove check for IMX6Q and update comments: The OTP values have been tested on IMX6SOLO, IMX6DUALLITE, and IMX6SX and Freescale FAE has shared data with me that the OTP settings are the same and that the reference manuals will reflect this in their next updates. - set critical to max - 5C - set passive to max - 10C - display max temp in info - do not allow passive to be set above critical Signed-off-by: Eduardo Valentin --- drivers/thermal/imx_thermal.c | 56 +++++++++++++++++++++++++++++++------------ 1 file changed, 41 insertions(+), 15 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index c8fe3ca..c5547bd 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -55,6 +55,7 @@ #define TEMPSENSE2_PANIC_VALUE_SHIFT 16 #define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 +#define OCOTP_MEM0 0x0480 #define OCOTP_ANA1 0x04e0 /* The driver supports 1 passive trip point and 1 critical trip point */ @@ -64,12 +65,6 @@ enum imx_thermal_trip { IMX_TRIP_NUM, }; -/* - * It defines the temperature in millicelsius for passive trip point - * that will trigger cooling action when crossed. - */ -#define IMX_TEMP_PASSIVE 85000 - #define IMX_POLLING_DELAY 2000 /* millisecond */ #define IMX_PASSIVE_DELAY 1000 @@ -100,12 +95,14 @@ struct imx_thermal_data { u32 c1, c2; /* See formula in imx_get_sensor_data() */ int temp_passive; int temp_critical; + int temp_max; int alarm_temp; int last_temp; bool irq_enabled; int irq; struct clk *thermal_clk; const struct thermal_soc_data *socdata; + const char *temp_grade; }; static void imx_set_panic_temp(struct imx_thermal_data *data, @@ -285,10 +282,12 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip, { struct imx_thermal_data *data = tz->devdata; + /* do not allow changing critical threshold */ if (trip == IMX_TRIP_CRITICAL) return -EPERM; - if (temp < 0 || temp > IMX_TEMP_PASSIVE) + /* do not allow passive to be set higher than critical */ + if (temp < 0 || temp > data->temp_critical) return -EINVAL; data->temp_passive = temp; @@ -404,17 +403,39 @@ static int imx_get_sensor_data(struct platform_device *pdev) data->c1 = temp64; data->c2 = n1 * data->c1 + 1000 * t1; - /* - * Set the default passive cooling trip point, - * can be changed from userspace. - */ - data->temp_passive = IMX_TEMP_PASSIVE; + /* use OTP for thermal grade */ + ret = regmap_read(map, OCOTP_MEM0, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret); + return ret; + } + + /* The maximum die temp is specified by the Temperature Grade */ + switch ((val >> 6) & 0x3) { + case 0: /* Commercial (0 to 95C) */ + data->temp_grade = "Commercial"; + data->temp_max = 95000; + break; + case 1: /* Extended Commercial (-20 to 105C) */ + data->temp_grade = "Extended Commercial"; + data->temp_max = 105000; + break; + case 2: /* Industrial (-40 to 105C) */ + data->temp_grade = "Industrial"; + data->temp_max = 105000; + break; + case 3: /* Automotive (-40 to 125C) */ + data->temp_grade = "Automotive"; + data->temp_max = 125000; + break; + } /* - * The maximum die temperature set to 20 C higher than - * IMX_TEMP_PASSIVE. + * Set the critical trip point at 5C under max + * Set the passive trip point at 10C under max (can change via sysfs) */ - data->temp_critical = 1000 * 20 + data->temp_passive; + data->temp_critical = data->temp_max - (1000 * 5); + data->temp_passive = data->temp_max - (1000 * 10); return 0; } @@ -551,6 +572,11 @@ static int imx_thermal_probe(struct platform_device *pdev) return ret; } + dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC" + " critical:%dC passive:%dC\n", data->temp_grade, + data->temp_max / 1000, data->temp_critical / 1000, + data->temp_passive / 1000); + /* Enable measurements at ~ 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ -- cgit v1.1