From b9326057a3d8447f5d2e74a7b521ccf21add2ec0 Mon Sep 17 00:00:00 2001 From: Andras Kovacs Date: Fri, 27 Jun 2014 14:50:11 +0200 Subject: USB: cp210x: add support for Corsair usb dongle Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 762e4a5..330df5c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -153,6 +153,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ + { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ -- cgit v1.1 From 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 Mon Sep 17 00:00:00 2001 From: Bernd Wachter Date: Wed, 2 Jul 2014 12:36:48 +0300 Subject: usb: option: Add ID for Telewell TW-LTE 4G v2 Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ac73f49..a968894 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1487,6 +1487,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, -- cgit v1.1 From 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Tue, 8 Jul 2014 14:42:23 +0200 Subject: USB: ftdi_sio: Add extra PID. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 ++- drivers/usb/serial/ftdi_sio_ids.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 115662c1..bf2e30a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -720,7 +720,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, - { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_1_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_3_PID) }, { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 500474c..106cc16 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -798,7 +798,8 @@ * Submitted by Colin Leroy */ #define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 +#define TESTO_1_PID 0x0001 +#define TESTO_3_PID 0x0003 /* * Mobility Electronics products. -- cgit v1.1 From d8279a40e50ad55539780aa617a32a53d7f0953e Mon Sep 17 00:00:00 2001 From: Michal Sojka Date: Thu, 10 Jul 2014 14:00:34 +0200 Subject: USB: serial: ftdi_sio: Add Infineon Triboard This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bf2e30a..8a3813b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -945,6 +945,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, + /* Infineon Devices */ + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 106cc16..c4777bc 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -584,6 +584,12 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Infineon Technologies + */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ + +/* * Acton Research Corp. */ #define ACTON_VID 0x0647 /* Vendor ID */ -- cgit v1.1 From 9820ccba4b1e9c0cdacf254a7be8616357086ebc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 11:54:59 +0530 Subject: phy: sun4i: depend on RESET_CONTROLLER The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard Reported-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f06..1d8099a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -112,6 +112,7 @@ config PHY_EXYNOS5250_SATA config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner -- cgit v1.1 From 3df9fcd59fd829da046ca63518ad8e51482a39e0 Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Thu, 10 Jul 2014 11:55:00 +0530 Subject: phy: omap-usb2: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 7007c11..2063d54 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -233,8 +233,8 @@ static int omap_usb2_probe(struct platform_device *pdev) if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phy->phy_base = devm_ioremap_resource(&pdev->dev, res); - if (!phy->phy_base) - return -ENOMEM; + if (IS_ERR(phy->phy_base)) + return PTR_ERR(phy->phy_base); phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } -- cgit v1.1 From bf5baf954a8249ad565862faa98accb19f3ab957 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 10 Jul 2014 11:55:01 +0530 Subject: drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-samsung-usb2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index 8a8c6bc..1e69a32 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -107,6 +107,7 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = { #endif { }, }; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); static int samsung_usb2_phy_probe(struct platform_device *pdev) { -- cgit v1.1 From e73b49f1c4e75c44d62585cc3e5b9c7894b61c32 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:02 +0530 Subject: phy: core: Fix error path in phy_create() Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ # 3.13+ Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index c64a2f3..49c4465 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -614,8 +614,9 @@ struct phy *phy_create(struct device *dev, const struct phy_ops *ops, return phy; put_dev: - put_device(&phy->dev); - ida_remove(&phy_ida, phy->id); + put_device(&phy->dev); /* calls phy_release() which frees resources */ + return ERR_PTR(ret); + free_phy: kfree(phy); return ERR_PTR(ret); @@ -799,7 +800,7 @@ static void phy_release(struct device *dev) phy = to_phy(dev); dev_vdbg(dev, "releasing '%s'\n", dev_name(dev)); - ida_remove(&phy_ida, phy->id); + ida_simple_remove(&phy_ida, phy->id); kfree(phy); } -- cgit v1.1 From eb82a3d846fab00c4b9ad6bbe5ade4fa5febc0af Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:03 +0530 Subject: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 2063d54..34b3961 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -262,7 +262,6 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->phy = &phy->phy; platform_set_drvdata(pdev, phy); - pm_runtime_enable(phy->dev); generic_phy = devm_phy_create(phy->dev, &ops, NULL); if (IS_ERR(generic_phy)) @@ -270,10 +269,13 @@ static int omap_usb2_probe(struct platform_device *pdev) phy_set_drvdata(generic_phy, phy); + pm_runtime_enable(phy->dev); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) + if (IS_ERR(phy_provider)) { + pm_runtime_disable(phy->dev); return PTR_ERR(phy_provider); + } phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { @@ -317,6 +319,7 @@ static int omap_usb2_remove(struct platform_device *pdev) if (!IS_ERR(phy->optclk)) clk_unprepare(phy->optclk); usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); return 0; } -- cgit v1.1