From fe009175ae3ec3724c1414440e22a1d32d806ec5 Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Mon, 20 Jul 2015 15:45:38 +0900 Subject: backlight: lp855x: Use private data for regulator control LP855x backlight device can be enabled by external VDD input. The 'supply' data is used for this purpose. It's kind of private data which runs internally, so there is no reason to expose to the platform data. And devm_regulator_get() is moved from _parse_dt() to _probe(). Regulator consumer(lp855x) can control regulator not only from DT but also from platform data configuration in a source file such like board-*.c. Signed-off-by: Milo Kim Acked-by: Sean Paul Acked-by: Jingoo Han Signed-off-by: Lee Jones --- drivers/video/backlight/lp855x_bl.c | 23 ++++++++++++----------- include/linux/platform_data/lp855x.h | 2 -- 2 files changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index 88116b4..f88df9e 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -73,6 +73,7 @@ struct lp855x { struct device *dev; struct lp855x_platform_data *pdata; struct pwm_device *pwm; + struct regulator *supply; /* regulator for VDD input */ }; static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data) @@ -378,13 +379,6 @@ static int lp855x_parse_dt(struct lp855x *lp) pdata->rom_data = &rom[0]; } - pdata->supply = devm_regulator_get(dev, "power"); - if (IS_ERR(pdata->supply)) { - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER) - return -EPROBE_DEFER; - pdata->supply = NULL; - } - lp->pdata = pdata; return 0; @@ -425,8 +419,15 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) else lp->mode = REGISTER_BASED; - if (lp->pdata->supply) { - ret = regulator_enable(lp->pdata->supply); + lp->supply = devm_regulator_get(lp->dev, "power"); + if (IS_ERR(lp->supply)) { + if (PTR_ERR(lp->supply) == -EPROBE_DEFER) + return -EPROBE_DEFER; + lp->supply = NULL; + } + + if (lp->supply) { + ret = regulator_enable(lp->supply); if (ret < 0) { dev_err(&cl->dev, "failed to enable supply: %d\n", ret); return ret; @@ -464,8 +465,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness = 0; backlight_update_status(lp->bl); - if (lp->pdata->supply) - regulator_disable(lp->pdata->supply); + if (lp->supply) + regulator_disable(lp->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); return 0; diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 9c7fd1e..1b2ba24 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -136,7 +136,6 @@ struct lp855x_rom_data { Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers - * @supply : regulator that supplies 3V input */ struct lp855x_platform_data { const char *name; @@ -145,7 +144,6 @@ struct lp855x_platform_data { unsigned int period_ns; int size_program; struct lp855x_rom_data *rom_data; - struct regulator *supply; }; #endif -- cgit v1.1 From 7ddbc2423c3301280b883bbb04b998203f30312c Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 21 Jul 2015 17:44:49 -0700 Subject: backlight: pm8941-wled: Move PM8941 WLED driver to backlight The Qualcomm PM8941 WLED block is used for backlight and should therefor be in the backlight framework and not in the LED framework. This moves the driver and adapts to the backlight api instead. Signed-off-by: Bjorn Andersson Tested-by: Rob Clark Acked-by: Jacek Anaszewski Acked-by: Jingoo Han Signed-off-by: Lee Jones --- .../devicetree/bindings/leds/leds-pm8941-wled.txt | 43 -- .../bindings/video/backlight/pm8941-wled.txt | 40 ++ drivers/leds/Kconfig | 8 - drivers/leds/Makefile | 1 - drivers/leds/leds-pm8941-wled.c | 435 --------------------- drivers/video/backlight/Kconfig | 7 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/pm8941-wled.c | 427 ++++++++++++++++++++ 8 files changed, 475 insertions(+), 487 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt create mode 100644 Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt delete mode 100644 drivers/leds/leds-pm8941-wled.c create mode 100644 drivers/video/backlight/pm8941-wled.c diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt deleted file mode 100644 index a85a964..0000000 --- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt +++ /dev/null @@ -1,43 +0,0 @@ -Binding for Qualcomm PM8941 WLED driver - -Required properties: -- compatible: should be "qcom,pm8941-wled" -- reg: slave address - -Optional properties: -- label: The label for this led - See Documentation/devicetree/bindings/leds/common.txt -- linux,default-trigger: Default trigger assigned to the LED - See Documentation/devicetree/bindings/leds/common.txt -- qcom,cs-out: bool; enable current sink output -- qcom,cabc: bool; enable content adaptive backlight control -- qcom,ext-gen: bool; use externally generated modulator signal to dim -- qcom,current-limit: mA; per-string current limit; value from 0 to 25 - default: 20mA -- qcom,current-boost-limit: mA; boost current limit; one of: - 105, 385, 525, 805, 980, 1260, 1400, 1680 - default: 805mA -- qcom,switching-freq: kHz; switching frequency; one of: - 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, - 1600, 1920, 2400, 3200, 4800, 9600, - default: 1600kHz -- qcom,ovp: V; Over-voltage protection limit; one of: - 27, 29, 32, 35 - default: 29V -- qcom,num-strings: #; number of led strings attached; value from 1 to 3 - default: 2 - -Example: - -pm8941-wled@d800 { - compatible = "qcom,pm8941-wled"; - reg = <0xd800>; - label = "backlight"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; -}; diff --git a/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt new file mode 100644 index 0000000..424f844 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt @@ -0,0 +1,40 @@ +Binding for Qualcomm PM8941 WLED driver + +Required properties: +- compatible: should be "qcom,pm8941-wled" +- reg: slave address + +Optional properties: +- label: The name of the backlight device +- qcom,cs-out: bool; enable current sink output +- qcom,cabc: bool; enable content adaptive backlight control +- qcom,ext-gen: bool; use externally generated modulator signal to dim +- qcom,current-limit: mA; per-string current limit; value from 0 to 25 + default: 20mA +- qcom,current-boost-limit: mA; boost current limit; one of: + 105, 385, 525, 805, 980, 1260, 1400, 1680 + default: 805mA +- qcom,switching-freq: kHz; switching frequency; one of: + 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, + 1600, 1920, 2400, 3200, 4800, 9600, + default: 1600kHz +- qcom,ovp: V; Over-voltage protection limit; one of: + 27, 29, 32, 35 + default: 29V +- qcom,num-strings: #; number of led strings attached; value from 1 to 3 + default: 2 + +Example: + +pm8941-wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9ad35f7..b8d4b96 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -578,14 +578,6 @@ config LEDS_VERSATILE This option enabled support for the LEDs on the ARM Versatile and RealView boards. Say Y to enabled these. -config LEDS_PM8941_WLED - tristate "LED support for the Qualcomm PM8941 WLED block" - depends on LEDS_CLASS - select REGMAP - help - This option enables support for the 'White' LED block - on Qualcomm PM8941 PMICs. - comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 8d6a24a..abe96d9 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -63,7 +63,6 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o -obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o # LED SPI Drivers diff --git a/drivers/leds/leds-pm8941-wled.c b/drivers/leds/leds-pm8941-wled.c deleted file mode 100644 index bf64a59..0000000 --- a/drivers/leds/leds-pm8941-wled.c +++ /dev/null @@ -1,435 +0,0 @@ -/* Copyright (c) 2015, Sony Mobile Communications, AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -#define PM8941_WLED_REG_VAL_BASE 0x40 -#define PM8941_WLED_REG_VAL_MAX 0xFFF - -#define PM8941_WLED_REG_MOD_EN 0x46 -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) - -#define PM8941_WLED_REG_SYNC 0x47 -#define PM8941_WLED_REG_SYNC_MASK 0x07 -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) -#define PM8941_WLED_REG_SYNC_ALL 0x07 -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 - -#define PM8941_WLED_REG_FREQ 0x4c -#define PM8941_WLED_REG_FREQ_MASK 0x0f - -#define PM8941_WLED_REG_OVP 0x4d -#define PM8941_WLED_REG_OVP_MASK 0x03 - -#define PM8941_WLED_REG_BOOST 0x4e -#define PM8941_WLED_REG_BOOST_MASK 0x07 - -#define PM8941_WLED_REG_SINK 0x4f -#define PM8941_WLED_REG_SINK_MASK 0xe0 -#define PM8941_WLED_REG_SINK_SHFT 0x05 - -/* Per-'string' registers below */ -#define PM8941_WLED_REG_STR_OFFSET 0x10 - -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) - -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f - -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 - -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) - -struct pm8941_wled_config { - u32 i_boost_limit; - u32 ovp; - u32 switch_freq; - u32 num_strings; - u32 i_limit; - bool cs_out_en; - bool ext_gen; - bool cabc_en; -}; - -struct pm8941_wled { - struct regmap *regmap; - u16 addr; - - struct led_classdev cdev; - - struct pm8941_wled_config cfg; -}; - -static int pm8941_wled_set(struct led_classdev *cdev, - enum led_brightness value) -{ - struct pm8941_wled *wled; - u8 ctrl = 0; - u16 val; - int rc; - int i; - - wled = container_of(cdev, struct pm8941_wled, cdev); - - if (value != 0) - ctrl = PM8941_WLED_REG_MOD_EN_BIT; - - val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_MOD_EN, - PM8941_WLED_REG_MOD_EN_MASK, ctrl); - if (rc) - return rc; - - for (i = 0; i < wled->cfg.num_strings; ++i) { - u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; - - rc = regmap_bulk_write(wled->regmap, - wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, - v, 2); - if (rc) - return rc; - } - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); - if (rc) - return rc; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); - return rc; -} - -static void pm8941_wled_set_brightness(struct led_classdev *cdev, - enum led_brightness value) -{ - if (pm8941_wled_set(cdev, value)) { - dev_err(cdev->dev, "Unable to set brightness\n"); - return; - } - cdev->brightness = value; -} - -static int pm8941_wled_setup(struct pm8941_wled *wled) -{ - int rc; - int i; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_OVP, - PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); - if (rc) - return rc; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_BOOST, - PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); - if (rc) - return rc; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_FREQ, - PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); - if (rc) - return rc; - - if (wled->cfg.cs_out_en) { - u8 all = (BIT(wled->cfg.num_strings) - 1) - << PM8941_WLED_REG_SINK_SHFT; - - rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SINK, - PM8941_WLED_REG_SINK_MASK, all); - if (rc) - return rc; - } - - for (i = 0; i < wled->cfg.num_strings; ++i) { - u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; - - rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_EN_BASE, - PM8941_WLED_REG_STR_MOD_MASK, - PM8941_WLED_REG_STR_MOD_EN); - if (rc) - return rc; - - if (wled->cfg.ext_gen) { - rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, - PM8941_WLED_REG_STR_MOD_SRC_MASK, - PM8941_WLED_REG_STR_MOD_SRC_EXT); - if (rc) - return rc; - } - - rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_SCALE_BASE, - PM8941_WLED_REG_STR_SCALE_MASK, - wled->cfg.i_limit); - if (rc) - return rc; - - rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_CABC_BASE, - PM8941_WLED_REG_STR_CABC_MASK, - wled->cfg.cabc_en ? - PM8941_WLED_REG_STR_CABC_EN : 0); - if (rc) - return rc; - } - - return 0; -} - -static const struct pm8941_wled_config pm8941_wled_config_defaults = { - .i_boost_limit = 3, - .i_limit = 20, - .ovp = 2, - .switch_freq = 5, - .num_strings = 0, - .cs_out_en = false, - .ext_gen = false, - .cabc_en = false, -}; - -struct pm8941_wled_var_cfg { - const u32 *values; - u32 (*fn)(u32); - int size; -}; - -static const u32 pm8941_wled_i_boost_limit_values[] = { - 105, 385, 525, 805, 980, 1260, 1400, 1680, -}; - -static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = { - .values = pm8941_wled_i_boost_limit_values, - .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), -}; - -static const u32 pm8941_wled_ovp_values[] = { - 35, 32, 29, 27, -}; - -static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { - .values = pm8941_wled_ovp_values, - .size = ARRAY_SIZE(pm8941_wled_ovp_values), -}; - -static u32 pm8941_wled_num_strings_values_fn(u32 idx) -{ - return idx + 1; -} - -static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = { - .fn = pm8941_wled_num_strings_values_fn, - .size = 3, -}; - -static u32 pm8941_wled_switch_freq_values_fn(u32 idx) -{ - return 19200 / (2 * (1 + idx)); -} - -static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = { - .fn = pm8941_wled_switch_freq_values_fn, - .size = 16, -}; - -static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { - .size = 26, -}; - -static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) -{ - if (idx >= cfg->size) - return UINT_MAX; - if (cfg->fn) - return cfg->fn(idx); - if (cfg->values) - return cfg->values[idx]; - return idx; -} - -static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) -{ - struct pm8941_wled_config *cfg = &wled->cfg; - u32 val; - int rc; - u32 c; - int i; - int j; - - const struct { - const char *name; - u32 *val_ptr; - const struct pm8941_wled_var_cfg *cfg; - } u32_opts[] = { - { - "qcom,current-boost-limit", - &cfg->i_boost_limit, - .cfg = &pm8941_wled_i_boost_limit_cfg, - }, - { - "qcom,current-limit", - &cfg->i_limit, - .cfg = &pm8941_wled_i_limit_cfg, - }, - { - "qcom,ovp", - &cfg->ovp, - .cfg = &pm8941_wled_ovp_cfg, - }, - { - "qcom,switching-freq", - &cfg->switch_freq, - .cfg = &pm8941_wled_switch_freq_cfg, - }, - { - "qcom,num-strings", - &cfg->num_strings, - .cfg = &pm8941_wled_num_strings_cfg, - }, - }; - const struct { - const char *name; - bool *val_ptr; - } bool_opts[] = { - { "qcom,cs-out", &cfg->cs_out_en, }, - { "qcom,ext-gen", &cfg->ext_gen, }, - { "qcom,cabc", &cfg->cabc_en, }, - }; - - rc = of_property_read_u32(dev->of_node, "reg", &val); - if (rc || val > 0xffff) { - dev_err(dev, "invalid IO resources\n"); - return rc ? rc : -EINVAL; - } - wled->addr = val; - - rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name); - if (rc) - wled->cdev.name = dev->of_node->name; - - wled->cdev.default_trigger = of_get_property(dev->of_node, - "linux,default-trigger", NULL); - - *cfg = pm8941_wled_config_defaults; - for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { - rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); - if (rc == -EINVAL) { - continue; - } else if (rc) { - dev_err(dev, "error reading '%s'\n", u32_opts[i].name); - return rc; - } - - c = UINT_MAX; - for (j = 0; c != val; j++) { - c = pm8941_wled_values(u32_opts[i].cfg, j); - if (c == UINT_MAX) { - dev_err(dev, "invalid value for '%s'\n", - u32_opts[i].name); - return -EINVAL; - } - } - - dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); - *u32_opts[i].val_ptr = j; - } - - for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) { - if (of_property_read_bool(dev->of_node, bool_opts[i].name)) - *bool_opts[i].val_ptr = true; - } - - cfg->num_strings = cfg->num_strings + 1; - - return 0; -} - -static int pm8941_wled_probe(struct platform_device *pdev) -{ - struct pm8941_wled *wled; - struct regmap *regmap; - int rc; - - regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (!regmap) { - dev_err(&pdev->dev, "Unable to get regmap\n"); - return -EINVAL; - } - - wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL); - if (!wled) - return -ENOMEM; - - wled->regmap = regmap; - - rc = pm8941_wled_configure(wled, &pdev->dev); - if (rc) - return rc; - - rc = pm8941_wled_setup(wled); - if (rc) - return rc; - - wled->cdev.brightness_set = pm8941_wled_set_brightness; - - rc = devm_led_classdev_register(&pdev->dev, &wled->cdev); - if (rc) - return rc; - - platform_set_drvdata(pdev, wled); - - return 0; -}; - -static const struct of_device_id pm8941_wled_match_table[] = { - { .compatible = "qcom,pm8941-wled" }, - {} -}; -MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); - -static struct platform_driver pm8941_wled_driver = { - .probe = pm8941_wled_probe, - .driver = { - .name = "pm8941-wled", - .of_match_table = pm8941_wled_match_table, - }, -}; - -module_platform_driver(pm8941_wled_driver); - -MODULE_DESCRIPTION("pm8941 wled driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:pm8941-wled"); diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 0505b79..5ffa4b4 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -299,6 +299,13 @@ config BACKLIGHT_TOSA If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight +config BACKLIGHT_PM8941_WLED + tristate "Qualcomm PM8941 WLED Driver" + select REGMAP + help + If you have the Qualcomm PM8941, say Y to enable a driver for the + WLED block. + config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" depends on X86 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index d67073f..16ec534 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o +obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o diff --git a/drivers/video/backlight/pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c new file mode 100644 index 0000000..c704c32 --- /dev/null +++ b/drivers/video/backlight/pm8941-wled.c @@ -0,0 +1,427 @@ +/* Copyright (c) 2015, Sony Mobile Communications, AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#define PM8941_WLED_REG_VAL_BASE 0x40 +#define PM8941_WLED_REG_VAL_MAX 0xFFF + +#define PM8941_WLED_REG_MOD_EN 0x46 +#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) +#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) + +#define PM8941_WLED_REG_SYNC 0x47 +#define PM8941_WLED_REG_SYNC_MASK 0x07 +#define PM8941_WLED_REG_SYNC_LED1 BIT(0) +#define PM8941_WLED_REG_SYNC_LED2 BIT(1) +#define PM8941_WLED_REG_SYNC_LED3 BIT(2) +#define PM8941_WLED_REG_SYNC_ALL 0x07 +#define PM8941_WLED_REG_SYNC_CLEAR 0x00 + +#define PM8941_WLED_REG_FREQ 0x4c +#define PM8941_WLED_REG_FREQ_MASK 0x0f + +#define PM8941_WLED_REG_OVP 0x4d +#define PM8941_WLED_REG_OVP_MASK 0x03 + +#define PM8941_WLED_REG_BOOST 0x4e +#define PM8941_WLED_REG_BOOST_MASK 0x07 + +#define PM8941_WLED_REG_SINK 0x4f +#define PM8941_WLED_REG_SINK_MASK 0xe0 +#define PM8941_WLED_REG_SINK_SHFT 0x05 + +/* Per-'string' registers below */ +#define PM8941_WLED_REG_STR_OFFSET 0x10 + +#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 +#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) +#define PM8941_WLED_REG_STR_MOD_EN BIT(7) + +#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 +#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f + +#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 +#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 +#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 +#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 + +#define PM8941_WLED_REG_STR_CABC_BASE 0x66 +#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) +#define PM8941_WLED_REG_STR_CABC_EN BIT(7) + +struct pm8941_wled_config { + u32 i_boost_limit; + u32 ovp; + u32 switch_freq; + u32 num_strings; + u32 i_limit; + bool cs_out_en; + bool ext_gen; + bool cabc_en; +}; + +struct pm8941_wled { + const char *name; + struct regmap *regmap; + u16 addr; + + struct pm8941_wled_config cfg; +}; + +static int pm8941_wled_update_status(struct backlight_device *bl) +{ + struct pm8941_wled *wled = bl_get_data(bl); + u16 val = bl->props.brightness; + u8 ctrl = 0; + int rc; + int i; + + if (bl->props.power != FB_BLANK_UNBLANK || + bl->props.fb_blank != FB_BLANK_UNBLANK || + bl->props.state & BL_CORE_FBBLANK) + val = 0; + + if (val != 0) + ctrl = PM8941_WLED_REG_MOD_EN_BIT; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_MOD_EN, + PM8941_WLED_REG_MOD_EN_MASK, ctrl); + if (rc) + return rc; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; + + rc = regmap_bulk_write(wled->regmap, + wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, + v, 2); + if (rc) + return rc; + } + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_SYNC, + PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_SYNC, + PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); + return rc; +} + +static int pm8941_wled_setup(struct pm8941_wled *wled) +{ + int rc; + int i; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_OVP, + PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_BOOST, + PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_FREQ, + PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); + if (rc) + return rc; + + if (wled->cfg.cs_out_en) { + u8 all = (BIT(wled->cfg.num_strings) - 1) + << PM8941_WLED_REG_SINK_SHFT; + + rc = regmap_update_bits(wled->regmap, + wled->addr + PM8941_WLED_REG_SINK, + PM8941_WLED_REG_SINK_MASK, all); + if (rc) + return rc; + } + + for (i = 0; i < wled->cfg.num_strings; ++i) { + u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; + + rc = regmap_update_bits(wled->regmap, + addr + PM8941_WLED_REG_STR_MOD_EN_BASE, + PM8941_WLED_REG_STR_MOD_MASK, + PM8941_WLED_REG_STR_MOD_EN); + if (rc) + return rc; + + if (wled->cfg.ext_gen) { + rc = regmap_update_bits(wled->regmap, + addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, + PM8941_WLED_REG_STR_MOD_SRC_MASK, + PM8941_WLED_REG_STR_MOD_SRC_EXT); + if (rc) + return rc; + } + + rc = regmap_update_bits(wled->regmap, + addr + PM8941_WLED_REG_STR_SCALE_BASE, + PM8941_WLED_REG_STR_SCALE_MASK, + wled->cfg.i_limit); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + addr + PM8941_WLED_REG_STR_CABC_BASE, + PM8941_WLED_REG_STR_CABC_MASK, + wled->cfg.cabc_en ? + PM8941_WLED_REG_STR_CABC_EN : 0); + if (rc) + return rc; + } + + return 0; +} + +static const struct pm8941_wled_config pm8941_wled_config_defaults = { + .i_boost_limit = 3, + .i_limit = 20, + .ovp = 2, + .switch_freq = 5, + .num_strings = 0, + .cs_out_en = false, + .ext_gen = false, + .cabc_en = false, +}; + +struct pm8941_wled_var_cfg { + const u32 *values; + u32 (*fn)(u32); + int size; +}; + +static const u32 pm8941_wled_i_boost_limit_values[] = { + 105, 385, 525, 805, 980, 1260, 1400, 1680, +}; + +static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = { + .values = pm8941_wled_i_boost_limit_values, + .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), +}; + +static const u32 pm8941_wled_ovp_values[] = { + 35, 32, 29, 27, +}; + +static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { + .values = pm8941_wled_ovp_values, + .size = ARRAY_SIZE(pm8941_wled_ovp_values), +}; + +static u32 pm8941_wled_num_strings_values_fn(u32 idx) +{ + return idx + 1; +} + +static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = { + .fn = pm8941_wled_num_strings_values_fn, + .size = 3, +}; + +static u32 pm8941_wled_switch_freq_values_fn(u32 idx) +{ + return 19200 / (2 * (1 + idx)); +} + +static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = { + .fn = pm8941_wled_switch_freq_values_fn, + .size = 16, +}; + +static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { + .size = 26, +}; + +static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) +{ + if (idx >= cfg->size) + return UINT_MAX; + if (cfg->fn) + return cfg->fn(idx); + if (cfg->values) + return cfg->values[idx]; + return idx; +} + +static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) +{ + struct pm8941_wled_config *cfg = &wled->cfg; + u32 val; + int rc; + u32 c; + int i; + int j; + + const struct { + const char *name; + u32 *val_ptr; + const struct pm8941_wled_var_cfg *cfg; + } u32_opts[] = { + { + "qcom,current-boost-limit", + &cfg->i_boost_limit, + .cfg = &pm8941_wled_i_boost_limit_cfg, + }, + { + "qcom,current-limit", + &cfg->i_limit, + .cfg = &pm8941_wled_i_limit_cfg, + }, + { + "qcom,ovp", + &cfg->ovp, + .cfg = &pm8941_wled_ovp_cfg, + }, + { + "qcom,switching-freq", + &cfg->switch_freq, + .cfg = &pm8941_wled_switch_freq_cfg, + }, + { + "qcom,num-strings", + &cfg->num_strings, + .cfg = &pm8941_wled_num_strings_cfg, + }, + }; + const struct { + const char *name; + bool *val_ptr; + } bool_opts[] = { + { "qcom,cs-out", &cfg->cs_out_en, }, + { "qcom,ext-gen", &cfg->ext_gen, }, + { "qcom,cabc", &cfg->cabc_en, }, + }; + + rc = of_property_read_u32(dev->of_node, "reg", &val); + if (rc || val > 0xffff) { + dev_err(dev, "invalid IO resources\n"); + return rc ? rc : -EINVAL; + } + wled->addr = val; + + rc = of_property_read_string(dev->of_node, "label", &wled->name); + if (rc) + wled->name = dev->of_node->name; + + *cfg = pm8941_wled_config_defaults; + for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { + rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); + if (rc == -EINVAL) { + continue; + } else if (rc) { + dev_err(dev, "error reading '%s'\n", u32_opts[i].name); + return rc; + } + + c = UINT_MAX; + for (j = 0; c != val; j++) { + c = pm8941_wled_values(u32_opts[i].cfg, j); + if (c == UINT_MAX) { + dev_err(dev, "invalid value for '%s'\n", + u32_opts[i].name); + return -EINVAL; + } + } + + dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); + *u32_opts[i].val_ptr = j; + } + + for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) { + if (of_property_read_bool(dev->of_node, bool_opts[i].name)) + *bool_opts[i].val_ptr = true; + } + + cfg->num_strings = cfg->num_strings + 1; + + return 0; +} + +static const struct backlight_ops pm8941_wled_ops = { + .update_status = pm8941_wled_update_status, +}; + +static int pm8941_wled_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct pm8941_wled *wled; + struct regmap *regmap; + int rc; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "Unable to get regmap\n"); + return -EINVAL; + } + + wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL); + if (!wled) + return -ENOMEM; + + wled->regmap = regmap; + + rc = pm8941_wled_configure(wled, &pdev->dev); + if (rc) + return rc; + + rc = pm8941_wled_setup(wled); + if (rc) + return rc; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = PM8941_WLED_REG_VAL_MAX; + bl = devm_backlight_device_register(&pdev->dev, wled->name, + &pdev->dev, wled, + &pm8941_wled_ops, &props); + if (IS_ERR(bl)) + return PTR_ERR(bl); + + return 0; +}; + +static const struct of_device_id pm8941_wled_match_table[] = { + { .compatible = "qcom,pm8941-wled" }, + {} +}; +MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); + +static struct platform_driver pm8941_wled_driver = { + .probe = pm8941_wled_probe, + .driver = { + .name = "pm8941-wled", + .of_match_table = pm8941_wled_match_table, + }, +}; + +module_platform_driver(pm8941_wled_driver); + +MODULE_DESCRIPTION("pm8941 wled driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1 From 047ffbb27115b57759767145803b752518399d90 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 17 Aug 2015 15:59:17 +0800 Subject: backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro IS_ERR_VALUE() makes sense only *if* there could be valid values in negative error range. Signed-off-by: Axel Lin Signed-off-by: Lee Jones --- drivers/video/backlight/sky81452-backlight.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c index 052fa1b..d414c7a 100644 --- a/drivers/video/backlight/sky81452-backlight.c +++ b/drivers/video/backlight/sky81452-backlight.c @@ -65,7 +65,7 @@ static int sky81452_bl_update_status(struct backlight_device *bd) if (brightness > 0) { ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, @@ -87,12 +87,12 @@ static ssize_t sky81452_bl_store_enable(struct device *dev, int ret; ret = kstrtoul(buf, 16, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, value << CTZ(SKY81452_EN)); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; return count; @@ -108,7 +108,7 @@ static ssize_t sky81452_bl_show_open_short(struct device *dev, reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; ret = regmap_read(regmap, reg, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; if (value & SKY81452_SHRT) { @@ -136,7 +136,7 @@ static ssize_t sky81452_bl_show_fault(struct device *dev, int ret; ret = regmap_read(regmap, SKY81452_REG4, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; *buf = 0; @@ -196,7 +196,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( pdata->gpio_enable = of_get_gpio(np, 0); ret = of_property_count_u32_elems(np, "led-sources"); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); } else { num_entry = ret; @@ -205,7 +205,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( ret = of_property_read_u32_array(np, "led-sources", sources, num_entry); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "led-sources node is invalid.\n"); return ERR_PTR(-EINVAL); } @@ -218,12 +218,12 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( ret = of_property_read_u32(np, "skyworks,short-detection-threshold-volt", &pdata->short_detection_threshold); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pdata->short_detection_threshold = 7; ret = of_property_read_u32(np, "skyworks,current-limit-mA", &pdata->boost_current_limit); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pdata->boost_current_limit = 2750; of_node_put(np); @@ -278,14 +278,14 @@ static int sky81452_bl_probe(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_enable)) { ret = devm_gpio_request_one(dev, pdata->gpio_enable, GPIOF_OUT_INIT_HIGH, "sky81452-en"); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "failed to request GPIO. err=%d\n", ret); return ret; } } ret = sky81452_bl_init_device(regmap, pdata); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "failed to initialize. err=%d\n", ret); return ret; } @@ -302,8 +302,8 @@ static int sky81452_bl_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bd); - ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); - if (IS_ERR_VALUE(ret)) { + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); + if (ret < 0) { dev_err(dev, "failed to create attribute. err=%d\n", ret); return ret; } -- cgit v1.1 From 85463d8ed1ffae0eb0bd070e400f33918a6696ef Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Wed, 1 Jul 2015 12:08:31 +0200 Subject: backlight: lp8788_bl: Delete a check before backlight_device_unregister() The backlight_device_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Acked-by: Jingoo Han Signed-off-by: Lee Jones --- drivers/video/backlight/lp8788_bl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c index e418d5b..5d583d7 100644 --- a/drivers/video/backlight/lp8788_bl.c +++ b/drivers/video/backlight/lp8788_bl.c @@ -221,8 +221,7 @@ static void lp8788_backlight_unregister(struct lp8788_bl *bl) { struct backlight_device *bl_dev = bl->bl_dev; - if (bl_dev) - backlight_device_unregister(bl_dev); + backlight_device_unregister(bl_dev); } static ssize_t lp8788_get_bl_ctl_mode(struct device *dev, -- cgit v1.1 From 13d20b3b618adc43168b034792eec57063b5ec6f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 25 Aug 2015 08:31:12 +0200 Subject: backlight: tosa: Export I2C module alias information The I2C core always reports the MODALIAS uevent as "i2c:" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: I2C id table or OF match table). So drivers needs to export the I2C id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. Signed-off-by: Javier Martinez Canillas Signed-off-by: Lee Jones --- drivers/video/backlight/tosa_bl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 3ad6765..83742d8 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -158,6 +158,7 @@ static const struct i2c_device_id tosa_bl_id[] = { { "tosa-bl", 0 }, { }, }; +MODULE_DEVICE_TABLE(i2c, tosa_bl_id); static struct i2c_driver tosa_bl_driver = { .driver = { -- cgit v1.1