From a93620b860434a19820072e656f4933e101ea6d4 Mon Sep 17 00:00:00 2001 From: Martin Hicks Date: Wed, 28 Jun 2006 12:17:47 -0400 Subject: [PATCH] sata_vsc: data_xfer should use mmio Hi, sata_vsc is an MMIO device, and should use the correct data_xfer function. This problem was introduced by: commit a6b2c5d4754dc539a560fdf0d3fb78a14174394a Author: Alan Cox Date: Mon May 22 16:59:59 2006 +0100 [PATCH] PATCH: libata. Add ->data_xfer method Signed-off-by: Martin Hicks Signed-off-by: Jeff Garzik --- drivers/scsi/sata_vsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 916fe6f..ad37871 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -297,7 +297,7 @@ static const struct ata_port_operations vsc_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_mmio_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, -- cgit v1.1 From e6d902a3bfd53da375588e498251f4f4f6cd9650 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 28 Jun 2006 08:30:31 -0500 Subject: [PATCH] libata: Conditionally set host->max_cmd_len In preparation for SAS attached SATA devices, which will not have a libata scsi_host, only setup host->max_cmd_len if ap->host exists. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1c960ac..fd0e6cc 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1325,6 +1325,19 @@ static void ata_dev_config_ncq(struct ata_device *dev, snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); } +static void ata_set_port_max_cmd_len(struct ata_port *ap) +{ + int i; + + if (ap->host) { + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); + } +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -1344,7 +1357,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; - int i, rc; + int rc; if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { ata_dev_printk(dev, KERN_INFO, @@ -1474,11 +1487,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) cdb_intr_string); } - ap->host->max_cmd_len = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); + ata_set_port_max_cmd_len(ap); /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { -- cgit v1.1 From b51e9e5db0e36239f786692f1cac6e435ed30c66 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 Jun 2006 01:29:30 +0900 Subject: [PATCH] libata: add ap->pflags and move core dynamic flags to it ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- drivers/scsi/libata-core.c | 24 +++++++++++----------- drivers/scsi/libata-eh.c | 50 +++++++++++++++++++++++----------------------- drivers/scsi/libata-scsi.c | 2 +- drivers/scsi/sata_sil.c | 2 +- include/linux/libata.h | 30 +++++++++++++++++----------- 6 files changed, 58 insertions(+), 52 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 15f6cd4..7447ba0 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1052,7 +1052,7 @@ static void ahci_thaw(struct ata_port *ap) static void ahci_error_handler(struct ata_port *ap) { - if (!(ap->flags & ATA_FLAG_FROZEN)) { + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { /* restart engine */ ahci_stop_engine(ap); ahci_start_engine(ap); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index fd0e6cc..ccab1d7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -907,7 +907,7 @@ void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, { int rc; - if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) + if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) return; PREPARE_WORK(&ap->port_task, fn, data); @@ -938,7 +938,7 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("ENTER\n"); spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; + ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(ap->lock, flags); DPRINTK("flush #1\n"); @@ -957,7 +957,7 @@ void ata_port_flush_task(struct ata_port *ap) } spin_lock_irqsave(ap->lock, flags); - ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; + ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(ap->lock, flags); if (ata_msg_ctl(ap)) @@ -1009,7 +1009,7 @@ unsigned ata_exec_internal(struct ata_device *dev, spin_lock_irqsave(ap->lock, flags); /* no internal command while frozen */ - if (ap->flags & ATA_FLAG_FROZEN) { + if (ap->pflags & ATA_PFLAG_FROZEN) { spin_unlock_irqrestore(ap->lock, flags); return AC_ERR_SYSTEM; } @@ -2641,7 +2641,7 @@ int ata_std_prereset(struct ata_port *ap) /* if SATA, resume phy */ if (ap->cbl == ATA_CBL_SATA) { - if (ap->flags & ATA_FLAG_LOADING) + if (ap->pflags & ATA_PFLAG_LOADING) timing = sata_deb_timing_boot; else timing = sata_deb_timing_eh; @@ -4294,7 +4294,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) unsigned int i; /* no command while frozen */ - if (unlikely(ap->flags & ATA_FLAG_FROZEN)) + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; /* the last tag is reserved for internal command. */ @@ -4416,7 +4416,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * taken care of. */ if (ap->ops->error_handler) { - WARN_ON(ap->flags & ATA_FLAG_FROZEN); + WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); if (unlikely(qc->err_mask)) qc->flags |= ATA_QCFLAG_FAILED; @@ -5051,13 +5051,13 @@ int ata_device_resume(struct ata_device *dev) { struct ata_port *ap = dev->ap; - if (ap->flags & ATA_FLAG_SUSPENDED) { + if (ap->pflags & ATA_PFLAG_SUSPENDED) { struct ata_device *failed_dev; ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000); - ap->flags &= ~ATA_FLAG_SUSPENDED; + ap->pflags &= ~ATA_PFLAG_SUSPENDED; while (ata_set_mode(ap, &failed_dev)) ata_dev_disable(failed_dev); } @@ -5088,7 +5088,7 @@ int ata_device_suspend(struct ata_device *dev, pm_message_t state) if (state.event != PM_EVENT_FREEZE) ata_standby_drive(dev); - ap->flags |= ATA_FLAG_SUSPENDED; + ap->pflags |= ATA_PFLAG_SUSPENDED; return 0; } @@ -5459,7 +5459,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; ap->eh_info.action |= ATA_EH_SOFTRESET; - ap->flags |= ATA_FLAG_LOADING; + ap->pflags |= ATA_PFLAG_LOADING; ata_port_schedule_eh(ap); spin_unlock_irqrestore(ap->lock, flags); @@ -5527,7 +5527,7 @@ void ata_port_detach(struct ata_port *ap) /* tell EH we're leaving & flush EH */ spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_UNLOADING; + ap->pflags |= ATA_PFLAG_UNLOADING; spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index bf5a72a..f2f29a8 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -270,13 +270,13 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_context.i = ap->eh_info; memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - ap->flags |= ATA_FLAG_EH_IN_PROGRESS; - ap->flags &= ~ATA_FLAG_EH_PENDING; + ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_PENDING; spin_unlock_irqrestore(ap_lock, flags); /* invoke EH. if unloading, just finish failed qcs */ - if (!(ap->flags & ATA_FLAG_UNLOADING)) + if (!(ap->pflags & ATA_PFLAG_UNLOADING)) ap->ops->error_handler(ap); else ata_eh_finish(ap); @@ -287,7 +287,7 @@ void ata_scsi_error(struct Scsi_Host *host) */ spin_lock_irqsave(ap_lock, flags); - if (ap->flags & ATA_FLAG_EH_PENDING) { + if (ap->pflags & ATA_PFLAG_EH_PENDING) { if (--repeat_cnt) { ata_port_printk(ap, KERN_INFO, "EH pending after completion, " @@ -323,19 +323,19 @@ void ata_scsi_error(struct Scsi_Host *host) /* clean up */ spin_lock_irqsave(ap_lock, flags); - if (ap->flags & ATA_FLAG_LOADING) { - ap->flags &= ~ATA_FLAG_LOADING; + if (ap->pflags & ATA_PFLAG_LOADING) { + ap->pflags &= ~ATA_PFLAG_LOADING; } else { - if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) + if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) queue_work(ata_aux_wq, &ap->hotplug_task); - if (ap->flags & ATA_FLAG_RECOVERED) + if (ap->pflags & ATA_PFLAG_RECOVERED) ata_port_printk(ap, KERN_INFO, "EH complete\n"); } - ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); + ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); /* tell wait_eh that we're done */ - ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; wake_up_all(&ap->eh_wait_q); spin_unlock_irqrestore(ap_lock, flags); @@ -360,7 +360,7 @@ void ata_port_wait_eh(struct ata_port *ap) retry: spin_lock_irqsave(ap->lock, flags); - while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { + while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) { prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); spin_unlock_irqrestore(ap->lock, flags); schedule(); @@ -489,7 +489,7 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) WARN_ON(!ap->ops->error_handler); qc->flags |= ATA_QCFLAG_FAILED; - qc->ap->flags |= ATA_FLAG_EH_PENDING; + qc->ap->pflags |= ATA_PFLAG_EH_PENDING; /* The following will fail if timeout has already expired. * ata_scsi_error() takes care of such scmds on EH entry. @@ -513,7 +513,7 @@ void ata_port_schedule_eh(struct ata_port *ap) { WARN_ON(!ap->ops->error_handler); - ap->flags |= ATA_FLAG_EH_PENDING; + ap->pflags |= ATA_PFLAG_EH_PENDING; scsi_schedule_eh(ap->host); DPRINTK("port EH scheduled\n"); @@ -578,7 +578,7 @@ static void __ata_port_freeze(struct ata_port *ap) if (ap->ops->freeze) ap->ops->freeze(ap); - ap->flags |= ATA_FLAG_FROZEN; + ap->pflags |= ATA_PFLAG_FROZEN; DPRINTK("ata%u port frozen\n", ap->id); } @@ -646,7 +646,7 @@ void ata_eh_thaw_port(struct ata_port *ap) spin_lock_irqsave(ap->lock, flags); - ap->flags &= ~ATA_FLAG_FROZEN; + ap->pflags &= ~ATA_PFLAG_FROZEN; if (ap->ops->thaw) ap->ops->thaw(ap); @@ -731,7 +731,7 @@ static void ata_eh_detach_dev(struct ata_device *dev) if (ata_scsi_offline_dev(dev)) { dev->flags |= ATA_DFLAG_DETACHED; - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } /* clear per-dev EH actions */ @@ -761,7 +761,7 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, spin_lock_irqsave(ap->lock, flags); ata_eh_clear_action(dev, &ap->eh_info, action); - ap->flags |= ATA_FLAG_RECOVERED; + ap->pflags |= ATA_PFLAG_RECOVERED; spin_unlock_irqrestore(ap->lock, flags); } @@ -1027,7 +1027,7 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap) int tag, rc; /* if frozen, we can't do much */ - if (ap->flags & ATA_FLAG_FROZEN) + if (ap->pflags & ATA_PFLAG_FROZEN) return; /* is it NCQ device error? */ @@ -1327,7 +1327,7 @@ static void ata_eh_autopsy(struct ata_port *ap) } /* enforce default EH actions */ - if (ap->flags & ATA_FLAG_FROZEN || + if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) action |= ATA_EH_SOFTRESET; else if (all_err_mask) @@ -1385,7 +1385,7 @@ static void ata_eh_report(struct ata_port *ap) return; frozen = ""; - if (ap->flags & ATA_FLAG_FROZEN) + if (ap->pflags & ATA_PFLAG_FROZEN) frozen = " frozen"; if (ehc->i.dev) { @@ -1465,7 +1465,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, struct ata_eh_context *ehc = &ap->eh_context; unsigned int *classes = ehc->classes; int tries = ATA_EH_RESET_TRIES; - int verbose = !(ap->flags & ATA_FLAG_LOADING); + int verbose = !(ap->pflags & ATA_PFLAG_LOADING); unsigned int action; ata_reset_fn_t reset; int i, did_followup_srst, rc; @@ -1636,7 +1636,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, } spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; spin_unlock_irqrestore(ap->lock, flags); } } @@ -1673,7 +1673,7 @@ static int ata_eh_skip_recovery(struct ata_port *ap) struct ata_eh_context *ehc = &ap->eh_context; int i; - if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap)) + if (ap->pflags & ATA_PFLAG_FROZEN || ata_port_nr_enabled(ap)) return 0; /* skip if class codes for all vacant slots are ATA_DEV_NONE */ @@ -1744,7 +1744,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, rc = 0; /* if UNLOADING, finish immediately */ - if (ap->flags & ATA_FLAG_UNLOADING) + if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; /* skip EH if possible. */ @@ -1908,7 +1908,7 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - if (!(ap->flags & ATA_FLAG_LOADING)) { + if (!(ap->pflags & ATA_PFLAG_LOADING)) { ata_eh_autopsy(ap); ata_eh_report(ap); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 2915bca..153452e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2930,7 +2930,7 @@ void ata_scsi_hotplug(void *data) struct ata_port *ap = data; int i; - if (ap->flags & ATA_FLAG_UNLOADING) { + if (ap->pflags & ATA_PFLAG_UNLOADING) { DPRINTK("ENTER/EXIT - unloading\n"); return; } diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 7aabb45..70dbfb8 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -370,7 +370,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) * during hardreset makes controllers with broken SIEN * repeat probing needlessly. */ - if (!(ap->flags & ATA_FLAG_FROZEN)) { + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { ata_ehi_hotplugged(&ap->eh_info); ap->eh_info.serror |= serror; } diff --git a/include/linux/libata.h b/include/linux/libata.h index f4284bf..b5d247d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -160,22 +160,27 @@ enum { ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */ ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ - ATA_FLAG_DEBUGMSG = (1 << 13), - ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ - ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */ - ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */ - ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ - ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ - ATA_FLAG_LOADING = (1 << 19), /* boot/loading probe */ - ATA_FLAG_UNLOADING = (1 << 20), /* module is unloading */ - ATA_FLAG_SCSI_HOTPLUG = (1 << 21), /* SCSI hotplug scheduled */ + /* The following flag belongs to ap->pflags but is kept in + * ap->flags because it's referenced in many LLDs and will be + * removed in not-too-distant future. + */ + ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */ + + /* bits 24:31 of ap->flags are reserved for LLD specific flags */ - ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ - ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ + /* struct ata_port pflags */ + ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ + ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ + ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ + ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ + ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ + ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ + ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ - /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ + ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */ + ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -486,6 +491,7 @@ struct ata_port { const struct ata_port_operations *ops; spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ + unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ unsigned int hard_port_no; /* hardware port #; from zero */ -- cgit v1.1 From 0662c58b3265f52f708a6d59476bc7862b01f9c0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 02:54:58 +0900 Subject: [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy() ata_eh_autopsy() used to directly assign determined action mask to ehc->i.action thus overriding actions set by some of nested analyze functions. This patch makes ata_eh_autopsy() add action masks just as it's done in other places. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index f2f29a8..4a670db 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1346,7 +1346,7 @@ static void ata_eh_autopsy(struct ata_port *ap) /* record autopsy result */ ehc->i.dev = failed_dev; - ehc->i.action = action; + ehc->i.action |= action; DPRINTK("EXIT\n"); } -- cgit v1.1 From e30349d27e093f32ef517b5416d9dce1998d4676 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 03:02:15 +0900 Subject: [PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error() ap_lock was used because &ap->host_set->lock was too long and used a lot. Now that &ap->host_set->lock is replaced with ap->lock, there's no reason to keep ap_lock. [ed. note: that's not entirely true. ap_lock is a local variable, caching the results of a de-ref. In theory, if the compiler is smart enough, this patch is cosmetic. However, since this is not a fast path (it is the error path), this patch is nonetheless acceptable, even though it _may_ introduce a performance regression.] Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 4a670db..d19666c 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -190,7 +190,6 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); - spinlock_t *ap_lock = ap->lock; int i, repeat_cnt = ATA_EH_MAX_REPEAT; unsigned long flags; @@ -217,7 +216,7 @@ void ata_scsi_error(struct Scsi_Host *host) struct scsi_cmnd *scmd, *tmp; int nr_timedout = 0; - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -256,15 +255,15 @@ void ata_scsi_error(struct Scsi_Host *host) if (nr_timedout) __ata_port_freeze(ap); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else - spin_unlock_wait(ap_lock); + spin_unlock_wait(ap->lock); repeat: /* invoke error handler */ if (ap->ops->error_handler) { /* fetch & clear EH info */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); memset(&ap->eh_context, 0, sizeof(ap->eh_context)); ap->eh_context.i = ap->eh_info; @@ -273,7 +272,7 @@ void ata_scsi_error(struct Scsi_Host *host) ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; ap->pflags &= ~ATA_PFLAG_EH_PENDING; - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); /* invoke EH. if unloading, just finish failed qcs */ if (!(ap->pflags & ATA_PFLAG_UNLOADING)) @@ -285,14 +284,14 @@ void ata_scsi_error(struct Scsi_Host *host) * recovered the port but before this point. Repeat * EH in such case. */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); if (ap->pflags & ATA_PFLAG_EH_PENDING) { if (--repeat_cnt) { ata_port_printk(ap, KERN_INFO, "EH pending after completion, " "repeating EH (cnt=%d)\n", repeat_cnt); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); goto repeat; } ata_port_printk(ap, KERN_ERR, "EH pending after %d " @@ -302,14 +301,14 @@ void ata_scsi_error(struct Scsi_Host *host) /* this run is complete, make sure EH info is clear */ memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - /* Clear host_eh_scheduled while holding ap_lock such + /* Clear host_eh_scheduled while holding ap->lock such * that if exception occurs after this point but * before EH completion, SCSI midlayer will * re-initiate EH. */ host->host_eh_scheduled = 0; - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else { WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); ap->ops->eng_timeout(ap); @@ -321,7 +320,7 @@ void ata_scsi_error(struct Scsi_Host *host) scsi_eh_flush_done_q(&ap->eh_done_q); /* clean up */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); if (ap->pflags & ATA_PFLAG_LOADING) { ap->pflags &= ~ATA_PFLAG_LOADING; @@ -338,7 +337,7 @@ void ata_scsi_error(struct Scsi_Host *host) ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; wake_up_all(&ap->eh_wait_q); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("EXIT\n"); } -- cgit v1.1 From 28324304350e23db24d679c55de3f06a5b1e40aa Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: implement ATA_EHI_RESUME_LINK Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to be resumed. This used to be implied by ATA_EHI_HOTPLUGGED. However, hotplug isn't the only event which requires link resume and separating this out allows other places to request link resume. This differentiation also allows better debounce timing selection. This patch converts user scan to use ATA_EHI_RESUME_LINK. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 15 ++++++++------- drivers/scsi/libata-scsi.c | 1 + include/linux/libata.h | 3 ++- 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ccab1d7..90db054 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2627,13 +2627,14 @@ int ata_std_prereset(struct ata_port *ap) const unsigned long *timing; int rc; - /* hotplug? */ - if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { - if (ap->flags & ATA_FLAG_HRST_TO_RESUME) - ehc->i.action |= ATA_EH_HARDRESET; - if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) - ata_wait_spinup(ap); - } + /* handle link resume & hotplug spinup */ + if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && + (ap->flags & ATA_FLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && + (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) + ata_wait_spinup(ap); /* if we're about to do hardreset, nothing more to do */ if (ehc->i.action & ATA_EH_HARDRESET) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 153452e..ba3e515 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -3011,6 +3011,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, if (dev) { ap->eh_info.probe_mask |= 1 << dev->devno; ap->eh_info.action |= ATA_EH_SOFTRESET; + ap->eh_info.flags |= ATA_EHI_RESUME_LINK; } else rc = -EINVAL; } diff --git a/include/linux/libata.h b/include/linux/libata.h index b5d247d..4d4ed2c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -259,6 +259,7 @@ enum { /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ + ATA_EHI_RESUME_LINK = (1 << 1), /* need to resume link */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ @@ -836,7 +837,7 @@ static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) if (ehi->flags & ATA_EHI_HOTPLUGGED) return; - ehi->flags |= ATA_EHI_HOTPLUGGED; + ehi->flags |= ATA_EHI_HOTPLUGGED | ATA_EHI_RESUME_LINK; ehi->hotplug_timestamp = jiffies; ehi->err_mask |= AC_ERR_ATA_BUS; -- cgit v1.1 From e9c839142d698086d3fe33a0daafde55ddd00c4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: clean up debounce parameters and improve parameter selection The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 25 +++++++++++-------------- drivers/scsi/sata_sil24.c | 2 +- include/linux/libata.h | 15 ++++++++++++--- 3 files changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 90db054..7317445 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,9 +61,9 @@ #include "libata.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ -const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 }; -const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 }; -const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 }; +const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); @@ -2588,7 +2588,7 @@ static void ata_wait_spinup(struct ata_port *ap) /* first, debounce phy if SATA */ if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_eh); + rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); /* if debounced successfully and offline, no need to wait */ if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) @@ -2624,7 +2624,7 @@ static void ata_wait_spinup(struct ata_port *ap) int ata_std_prereset(struct ata_port *ap) { struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing; + const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; /* handle link resume & hotplug spinup */ @@ -2642,11 +2642,6 @@ int ata_std_prereset(struct ata_port *ap) /* if SATA, resume phy */ if (ap->cbl == ATA_CBL_SATA) { - if (ap->pflags & ATA_PFLAG_LOADING) - timing = sata_deb_timing_boot; - else - timing = sata_deb_timing_eh; - rc = sata_phy_resume(ap, timing); if (rc && rc != -EOPNOTSUPP) { /* phy resume failed */ @@ -2734,6 +2729,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) */ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) { + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); u32 scontrol; int rc; @@ -2771,7 +2768,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) msleep(1); /* bring phy back */ - sata_phy_resume(ap, sata_deb_timing_eh); + sata_phy_resume(ap, timing); /* TODO: phy layer with polling, timeouts, etc. */ if (ata_port_offline(ap)) { @@ -5852,9 +5849,9 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, * Do not depend on ABI/API stability. */ -EXPORT_SYMBOL_GPL(sata_deb_timing_boot); -EXPORT_SYMBOL_GPL(sata_deb_timing_eh); -EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); +EXPORT_SYMBOL_GPL(sata_deb_timing_normal); +EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); +EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_device_add); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 07a1c6a..04ae1ef 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -607,7 +607,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst); + rc = sata_phy_debounce(ap, sata_deb_timing_long); if (rc) { reason = "PHY debouncing failed"; goto err; diff --git a/include/linux/libata.h b/include/linux/libata.h index 4d4ed2c..2f7bbfc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -629,9 +629,18 @@ struct ata_timing { #define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) -extern const unsigned long sata_deb_timing_boot[]; -extern const unsigned long sata_deb_timing_eh[]; -extern const unsigned long sata_deb_timing_before_fsrst[]; +extern const unsigned long sata_deb_timing_normal[]; +extern const unsigned long sata_deb_timing_hotplug[]; +extern const unsigned long sata_deb_timing_long[]; + +static inline const unsigned long * +sata_ehc_deb_timing(struct ata_eh_context *ehc) +{ + if (ehc->i.flags & ATA_EHI_HOTPLUGGED) + return sata_deb_timing_hotplug; + else + return sata_deb_timing_normal; +} extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); -- cgit v1.1 From 1cdaf534f829b8759ba30f97d5e8dceb2ab77ba4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIET Implement ATA_EHI_NO_AUTOPSY and QUIET. These used to be implied by ATA_PFLAG_LOADING, but new power management and PMP support need to use these separately. e.g. Suspend/resume operations shouldn't print full EH messages and resume shouldn't be recorded as an error. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ++++-- drivers/scsi/libata-eh.c | 31 +++++++++++++++++-------------- include/linux/libata.h | 2 ++ 3 files changed, 23 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 7317445..f368536 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5447,6 +5447,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } if (ap->ops->error_handler) { + struct ata_eh_info *ehi = &ap->eh_info; unsigned long flags; ata_port_probe(ap); @@ -5454,8 +5455,9 @@ int ata_device_add(const struct ata_probe_ent *ent) /* kick EH for boot probing */ spin_lock_irqsave(ap->lock, flags); - ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; + ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ehi->action |= ATA_EH_SOFTRESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags |= ATA_PFLAG_LOADING; ata_port_schedule_eh(ap); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index d19666c..1e9e73d 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -322,14 +322,13 @@ void ata_scsi_error(struct Scsi_Host *host) /* clean up */ spin_lock_irqsave(ap->lock, flags); - if (ap->pflags & ATA_PFLAG_LOADING) { + if (ap->pflags & ATA_PFLAG_LOADING) ap->pflags &= ~ATA_PFLAG_LOADING; - } else { - if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) - queue_work(ata_aux_wq, &ap->hotplug_task); - if (ap->pflags & ATA_PFLAG_RECOVERED) - ata_port_printk(ap, KERN_INFO, "EH complete\n"); - } + else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + + if (ap->pflags & ATA_PFLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); @@ -759,8 +758,12 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, unsigned long flags; spin_lock_irqsave(ap->lock, flags); + ata_eh_clear_action(dev, &ap->eh_info, action); - ap->pflags |= ATA_PFLAG_RECOVERED; + + if (!(ap->eh_context.i.flags & ATA_EHI_QUIET)) + ap->pflags |= ATA_PFLAG_RECOVERED; + spin_unlock_irqrestore(ap->lock, flags); } @@ -1274,6 +1277,9 @@ static void ata_eh_autopsy(struct ata_port *ap) DPRINTK("ENTER\n"); + if (ehc->i.flags & ATA_EHI_NO_AUTOPSY) + return; + /* obtain and analyze SError */ rc = sata_scr_read(ap, SCR_ERROR, &serror); if (rc == 0) { @@ -1464,7 +1470,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, struct ata_eh_context *ehc = &ap->eh_context; unsigned int *classes = ehc->classes; int tries = ATA_EH_RESET_TRIES; - int verbose = !(ap->pflags & ATA_PFLAG_LOADING); + int verbose = !(ehc->i.flags & ATA_EHI_QUIET); unsigned int action; ata_reset_fn_t reset; int i, did_followup_srst, rc; @@ -1907,11 +1913,8 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - if (!(ap->pflags & ATA_PFLAG_LOADING)) { - ata_eh_autopsy(ap); - ata_eh_report(ap); - } - + ata_eh_autopsy(ap); + ata_eh_report(ap); ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } diff --git a/include/linux/libata.h b/include/linux/libata.h index 2f7bbfc..36938ae 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -260,6 +260,8 @@ enum { /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ ATA_EHI_RESUME_LINK = (1 << 1), /* need to resume link */ + ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */ + ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ -- cgit v1.1 From c0b6c0377c32fe3f6a2cf1e018db6da8a3b78379 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: separate out __ata_ehi_hotplugged() Separate out __ata_ehi_hotplugged() from ata_ehi_hotplugged(). The underscored version doesn't set AC_ERR_ATA_BUS. This will be used for resume which is a hotplug event but not an ATA bus error. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 36938ae..2aa1398 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -843,7 +843,7 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, (ehi)->desc_len = 0; \ } while (0) -static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +static inline void __ata_ehi_hotplugged(struct ata_eh_info *ehi) { if (ehi->flags & ATA_EHI_HOTPLUGGED) return; @@ -851,11 +851,16 @@ static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) ehi->flags |= ATA_EHI_HOTPLUGGED | ATA_EHI_RESUME_LINK; ehi->hotplug_timestamp = jiffies; - ehi->err_mask |= AC_ERR_ATA_BUS; ehi->action |= ATA_EH_SOFTRESET; ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1; } +static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +{ + __ata_ehi_hotplugged(ehi); + ehi->err_mask |= AC_ERR_ATA_BUS; +} + /* * qc helpers */ -- cgit v1.1 From 02670bf379267f55a43aa57f6895689697e90eb3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: implement PM EH actions Implement two PM per-dev EH actions - ATA_EH_SUSPEND and ATA_EH_RESUME. Each action puts the target device into suspended mode and resumes from it respectively. Once a device is put to suspended mode, no EH operations other than RESUME is allowed on the device. The device will stay suspended till it gets resumed and thus reset and revalidated. To implement this, a new device state helper - ata_dev_ready() - is implemented and used in EH action implementations to make them operate only on attached & running devices. If all possible devices on a port are suspended, reset is skipped too. This prevents spurious events including hotplug events from disrupting suspended devices. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 5 +- drivers/scsi/libata-eh.c | 185 ++++++++++++++++++++++++++++++++++++++++++++- include/linux/libata.h | 12 ++- 3 files changed, 198 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f368536..ad5cac7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2146,7 +2146,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * return error code and failing device on failure. */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (ata_dev_enabled(&ap->device[i])) { + if (ata_dev_ready(&ap->device[i])) { ap->ops->set_mode(ap); break; } @@ -2212,7 +2212,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) + /* don't udpate suspended devices' xfer mode */ + if (!ata_dev_ready(dev)) continue; rc = ata_dev_set_mode(dev); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 1e9e73d..b9df49a 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1610,7 +1610,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, dev = &ap->device[i]; action = ata_eh_dev_action(dev); - if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) { + if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { if (ata_port_offline(ap)) { rc = -EIO; break; @@ -1653,6 +1653,164 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, return rc; } +/** + * ata_eh_suspend - handle suspend EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle suspend EH action. Disk devices are spinned down and + * other types of devices are just marked suspended. Once + * suspended, no EH action to the device is allowed until it is + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned long flags; + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) + continue; + + WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); + + ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + /* flush cache */ + rc = ata_flush_cache(dev); + if (rc) + break; + + /* spin down */ + err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin down (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + spin_lock_irqsave(ap->lock, flags); + dev->flags |= ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_done(ap, dev, ATA_EH_SUSPEND); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + +/** + * ata_eh_prep_resume - prep for resume EH action + * @ap: target host port + * + * Clear SUSPENDED in preparation for scheduled resume actions. + * This allows other parts of EH to access the devices being + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_prep_resume(struct ata_port *ap) +{ + struct ata_device *dev; + unsigned long flags; + int i; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_resume - handle resume EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle resume EH action. Target devices are already reset and + * revalidated. Spinning up is the only operation left. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + err_mask = ata_do_simple_cmd(dev, + ATA_CMD_IDLEIMMEDIATE); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin up (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + ata_eh_done(ap, dev, ATA_EH_RESUME); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + static int ata_port_nr_enabled(struct ata_port *ap) { int i, cnt = 0; @@ -1678,6 +1836,18 @@ static int ata_eh_skip_recovery(struct ata_port *ap) struct ata_eh_context *ehc = &ap->eh_context; int i; + /* skip if all possible devices are suspended */ + for (i = 0; i < ata_port_max_devices(ap); i++) { + struct ata_device *dev = &ap->device[i]; + + if (ata_dev_absent(dev) || ata_dev_ready(dev)) + break; + } + + if (i == ata_port_max_devices(ap)) + return 1; + + /* always thaw frozen port and recover failed devices */ if (ap->pflags & ATA_PFLAG_FROZEN || ata_port_nr_enabled(ap)) return 0; @@ -1752,6 +1922,9 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; + /* prep for resume */ + ata_eh_prep_resume(ap); + /* skip EH if possible. */ if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; @@ -1779,6 +1952,11 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (rc) goto dev_fail; + /* resume devices */ + rc = ata_eh_resume(ap, &dev); + if (rc) + goto dev_fail; + /* configure transfer mode if the port has been reset */ if (ehc->i.flags & ATA_EHI_DID_RESET) { rc = ata_set_mode(ap, &dev); @@ -1788,6 +1966,11 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } } + /* suspend devices */ + rc = ata_eh_suspend(ap, &dev); + if (rc) + goto dev_fail; + goto out; dev_fail: diff --git a/include/linux/libata.h b/include/linux/libata.h index 2aa1398..363c750 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -131,6 +131,7 @@ enum { ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ + ATA_DFLAG_SUSPENDED = (1 << 9), /* device suspended */ ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), @@ -253,9 +254,13 @@ enum { ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), ATA_EH_HARDRESET = (1 << 2), + ATA_EH_SUSPEND = (1 << 3), + ATA_EH_RESUME = (1 << 4), + ATA_EH_PM_FREEZE = (1 << 5), ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, - ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND | + ATA_EH_RESUME | ATA_EH_PM_FREEZE, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -944,6 +949,11 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev) return ata_class_absent(dev->class); } +static inline unsigned int ata_dev_ready(const struct ata_device *dev) +{ + return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED); +} + /* * port helpers */ -- cgit v1.1 From d6f26d1f1f1128a896f38a7f8426daed0a1205a2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:26 +0900 Subject: [PATCH] libata: reimplement per-dev PM Reimplement per-dev PM. The original implementation directly put the device into suspended mode and didn't synchronize w/ EH operations including hotplug. This patch reimplements ata_scsi_device_suspend() and ata_scsi_device_resume() such that they request EH to perform the respective operations. Both functions synchronize with hotplug such that it doesn't operate on detached devices. Suspend waits for completion but resume just issues request and returns. This allows parallel wake up of devices and thus speeds up system resume. Due to sdev detach synchronization, it's not feasible to separate out EH requesting from sdev handling; thus, ata_device_suspend/resume() are removed and everything is implemented in the respective libata-scsi functions. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 84 ------------------------------- drivers/scsi/libata-scsi.c | 121 ++++++++++++++++++++++++++++++++++++++++++--- include/linux/libata.h | 2 - 3 files changed, 115 insertions(+), 92 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ad5cac7..51dbc52 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5009,88 +5009,6 @@ int ata_flush_cache(struct ata_device *dev) return 0; } -static int ata_standby_drive(struct ata_device *dev) -{ - unsigned int err_mask; - - err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to standby drive " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } - - return 0; -} - -static int ata_start_drive(struct ata_device *dev) -{ - unsigned int err_mask; - - err_mask = ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to start drive " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } - - return 0; -} - -/** - * ata_device_resume - wakeup a previously suspended devices - * @dev: the device to resume - * - * Kick the drive back into action, by sending it an idle immediate - * command and making sure its transfer mode matches between drive - * and host. - * - */ -int ata_device_resume(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - - if (ap->pflags & ATA_PFLAG_SUSPENDED) { - struct ata_device *failed_dev; - - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000); - - ap->pflags &= ~ATA_PFLAG_SUSPENDED; - while (ata_set_mode(ap, &failed_dev)) - ata_dev_disable(failed_dev); - } - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_start_drive(dev); - - return 0; -} - -/** - * ata_device_suspend - prepare a device for suspend - * @dev: the device to suspend - * @state: target power management state - * - * Flush the cache on the drive, if appropriate, then issue a - * standbynow command. - */ -int ata_device_suspend(struct ata_device *dev, pm_message_t state) -{ - struct ata_port *ap = dev->ap; - - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_flush_cache(dev); - - if (state.event != PM_EVENT_FREEZE) - ata_standby_drive(dev); - ap->pflags |= ATA_PFLAG_SUSPENDED; - return 0; -} - /** * ata_port_start - Set port up for dma. * @ap: Port to initialize @@ -5946,8 +5864,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(ata_device_suspend); -EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ba3e515..7ced41e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -397,20 +397,129 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) } } -int ata_scsi_device_resume(struct scsi_device *sdev) +/** + * ata_scsi_device_suspend - suspend ATA device associated with sdev + * @sdev: the SCSI device to suspend + * @state: target power management state + * + * Request suspend EH action on the ATA device associated with + * @sdev and wait for the operation to complete. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + unsigned long flags; + unsigned int action; + int rc = 0; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* wait for the previous resume to complete */ + while (dev->flags & ATA_DFLAG_SUSPENDED) { + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); + spin_lock_irqsave(ap->lock, flags); + } + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request suspend */ + action = ATA_EH_SUSPEND; + if (state.event != PM_EVENT_SUSPEND) + action |= ATA_EH_PM_FREEZE; + ap->eh_info.dev_action[dev->devno] |= action; + ap->eh_info.flags |= ATA_EHI_QUIET; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to do the job */ + ata_port_wait_eh(ap); + + spin_lock_irqsave(ap->lock, flags); + + /* If @sdev is still attached but the associated ATA device + * isn't suspended, the operation failed. + */ + if (sdev->sdev_state != SDEV_OFFLINE && + sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && + !(dev->flags & ATA_DFLAG_SUSPENDED)) + rc = -EIO; - return ata_device_resume(dev); + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + if (rc == 0) + sdev->sdev_gendev.power.power_state = state; + return rc; } -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) +/** + * ata_scsi_device_resume - resume ATA device associated with sdev + * @sdev: the SCSI device to resume + * + * Request resume EH action on the ATA device associated with + * @sdev and return immediately. This enables parallel + * wakeup/spinup of devices. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0. + */ +int ata_scsi_device_resume(struct scsi_device *sdev) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + unsigned int action; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; - return ata_device_suspend(dev, state); + /* request resume */ + action = ATA_EH_RESUME; + if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) + __ata_ehi_hotplugged(ehi); + else + action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; + ehi->dev_action[dev->devno] |= action; + + /* We don't want autopsy and verbose EH messages. Disable + * those if we're the only device on this link. + */ + if (ata_port_max_devices(ap) == 1) + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ata_port_schedule_eh(ap); + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + sdev->sdev_gendev.power.power_state = PMSG_ON; + return 0; } /** diff --git a/include/linux/libata.h b/include/linux/libata.h index 363c750..5ac2626 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -687,8 +687,6 @@ extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); -extern int ata_device_resume(struct ata_device *); -extern int ata_device_suspend(struct ata_device *, pm_message_t state); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, -- cgit v1.1 From 500530f652f9e5dabe7571b018dec47742ce0f16 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:27 +0900 Subject: [PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 165 +++++++++++++++++++++++++++++++++++++++++++-- drivers/scsi/libata-eh.c | 128 ++++++++++++++++++++++++++++++++++- include/linux/libata.h | 12 ++++ 3 files changed, 298 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 51dbc52..fa65b99 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5009,6 +5009,122 @@ int ata_flush_cache(struct ata_device *dev) return 0; } +static int ata_host_set_request_pm(struct ata_host_set *host_set, + pm_message_t mesg, unsigned int action, + unsigned int ehi_flags, int wait) +{ + unsigned long flags; + int i, rc; + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + /* Previous resume operation might still be in + * progress. Wait for PM_PENDING to clear. + */ + if (ap->pflags & ATA_PFLAG_PM_PENDING) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } + + /* request PM ops to EH */ + spin_lock_irqsave(ap->lock, flags); + + ap->pm_mesg = mesg; + if (wait) { + rc = 0; + ap->pm_result = &rc; + } + + ap->pflags |= ATA_PFLAG_PM_PENDING; + ap->eh_info.action |= action; + ap->eh_info.flags |= ehi_flags; + + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait and check result */ + if (wait) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + if (rc) + return rc; + } + } + + return 0; +} + +/** + * ata_host_set_suspend - suspend host_set + * @host_set: host_set to suspend + * @mesg: PM message + * + * Suspend @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and waits for EH + * to finish. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) +{ + int i, j, rc; + + rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); + if (rc) + goto fail; + + /* EH is quiescent now. Fail if we have any ready device. + * This happens if hotplug occurs between completion of device + * suspension and here. + */ + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + for (j = 0; j < ATA_MAX_DEVICES; j++) { + struct ata_device *dev = &ap->device[j]; + + if (ata_dev_ready(dev)) { + ata_port_printk(ap, KERN_WARNING, + "suspend failed, device %d " + "still active\n", dev->devno); + rc = -EBUSY; + goto fail; + } + } + } + + host_set->dev->power.power_state = mesg; + return 0; + + fail: + ata_host_set_resume(host_set); + return rc; +} + +/** + * ata_host_set_resume - resume host_set + * @host_set: host_set to resume + * + * Resume @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and returns. + * Note that all resume operations are performed parallely. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_host_set_resume(struct ata_host_set *host_set) +{ + ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host_set->dev->power.power_state = PMSG_ON; +} + /** * ata_port_start - Set port up for dma. * @ap: Port to initialize @@ -5651,20 +5767,55 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state) { pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - return 0; + + if (state.event == PM_EVENT_SUSPEND) { + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + } } -int ata_pci_device_resume(struct pci_dev *pdev) +void ata_pci_device_do_resume(struct pci_dev *pdev) { pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_enable_device(pdev); pci_set_master(pdev); +} + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + int rc = 0; + + rc = ata_host_set_suspend(host_set, state); + if (rc) + return rc; + + if (host_set->next) { + rc = ata_host_set_suspend(host_set->next, state); + if (rc) { + ata_host_set_resume(host_set); + return rc; + } + } + + ata_pci_device_do_suspend(pdev, state); + + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + ata_host_set_resume(host_set); + if (host_set->next) + ata_host_set_resume(host_set->next); + return 0; } #endif /* CONFIG_PCI */ @@ -5844,6 +5995,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); EXPORT_SYMBOL_GPL(ata_port_online); EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_host_set_suspend); +EXPORT_SYMBOL_GPL(ata_host_set_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); @@ -5858,6 +6011,8 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); +EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); EXPORT_SYMBOL_GPL(ata_pci_default_filter); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index b9df49a..4b6aa30 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -47,6 +47,8 @@ static void __ata_port_freeze(struct ata_port *ap); static void ata_eh_finish(struct ata_port *ap); +static void ata_eh_handle_port_suspend(struct ata_port *ap); +static void ata_eh_handle_port_resume(struct ata_port *ap); static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) @@ -262,6 +264,9 @@ void ata_scsi_error(struct Scsi_Host *host) repeat: /* invoke error handler */ if (ap->ops->error_handler) { + /* process port resume request */ + ata_eh_handle_port_resume(ap); + /* fetch & clear EH info */ spin_lock_irqsave(ap->lock, flags); @@ -274,12 +279,15 @@ void ata_scsi_error(struct Scsi_Host *host) spin_unlock_irqrestore(ap->lock, flags); - /* invoke EH. if unloading, just finish failed qcs */ - if (!(ap->pflags & ATA_PFLAG_UNLOADING)) + /* invoke EH, skip if unloading or suspended */ + if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) ap->ops->error_handler(ap); else ata_eh_finish(ap); + /* process port suspend request */ + ata_eh_handle_port_suspend(ap); + /* Exception might have happend after ->error_handler * recovered the port but before this point. Repeat * EH in such case. @@ -2101,3 +2109,119 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } + +/** + * ata_eh_handle_port_suspend - perform port suspend operation + * @ap: port to suspend + * + * Suspend @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_suspend(struct ata_port *ap) +{ + unsigned long flags; + int rc = 0; + + /* are we suspending? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event == PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED); + + /* suspend */ + ata_eh_freeze_port(ap); + + if (ap->ops->port_suspend) + rc = ap->ops->port_suspend(ap, ap->pm_mesg); + + /* report result */ + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_PM_PENDING; + if (rc == 0) + ap->pflags |= ATA_PFLAG_SUSPENDED; + else + ata_port_schedule_eh(ap); + + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + + spin_unlock_irqrestore(ap->lock, flags); + + return; +} + +/** + * ata_eh_handle_port_resume - perform port resume operation + * @ap: port to resume + * + * Resume @ap. + * + * This function also waits upto one second until all devices + * hanging off this port requests resume EH action. This is to + * prevent invoking EH and thus reset multiple times on resume. + * + * On DPM resume, where some of devices might not be resumed + * together, this may delay port resume upto one second, but such + * DPM resumes are rare and 1 sec delay isn't too bad. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_resume(struct ata_port *ap) +{ + unsigned long timeout; + unsigned long flags; + int i, rc = 0; + + /* are we resuming? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event != PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + /* spurious? */ + if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) + goto done; + + if (ap->ops->port_resume) + rc = ap->ops->port_resume(ap); + + /* give devices time to request EH */ + timeout = jiffies + HZ; /* 1s max */ + while (1) { + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int action = ata_eh_dev_action(dev); + + if ((dev->flags & ATA_DFLAG_SUSPENDED) && + !(action & ATA_EH_RESUME)) + break; + } + + if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) + break; + msleep(10); + } + + done: + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + spin_unlock_irqrestore(ap->lock, flags); +} diff --git a/include/linux/libata.h b/include/linux/libata.h index 5ac2626..6cc497a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -182,6 +182,7 @@ enum { ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ + ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -549,6 +550,9 @@ struct ata_port { struct list_head eh_done_q; wait_queue_head_t eh_wait_q; + pm_message_t pm_mesg; + int *pm_result; + void *private_data; u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ @@ -603,6 +607,9 @@ struct ata_port_operations { void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, u32 val); + int (*port_suspend) (struct ata_port *ap, pm_message_t mesg); + int (*port_resume) (struct ata_port *ap); + int (*port_start) (struct ata_port *ap); void (*port_stop) (struct ata_port *ap); @@ -667,6 +674,8 @@ extern void ata_std_ports(struct ata_ioports *ioaddr); extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); +extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state); +extern void ata_pci_device_do_resume(struct pci_dev *pdev); extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state); extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); @@ -687,6 +696,9 @@ extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); +extern int ata_host_set_suspend(struct ata_host_set *host_set, + pm_message_t mesg); +extern void ata_host_set_resume(struct ata_host_set *host_set); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, -- cgit v1.1 From 3d8ec91352099b32a400f1952112dc076da28106 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:27 +0900 Subject: [PATCH] sata_sil: separate out sil_init_controller() Separate out controller initialization from sil_init_one() into sil_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 86 +++++++++++++++++++++++++++---------------------- 1 file changed, 48 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 70dbfb8..6033f79 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -561,6 +561,52 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } } +static void sil_init_controller(struct pci_dev *pdev, + int n_ports, unsigned long host_flags, + void __iomem *mmio_base) +{ + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_printk(KERN_INFO, &pdev->dev, + "Applying R_ERR on DMA activate " + "FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -570,8 +616,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) int rc; unsigned int i; int pci_dev_busy = 0; - u32 tmp; - u8 cls; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -630,42 +674,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - /* Initialize FIFO PCI bus arbitration */ - cls = sil_get_device_cache_line(pdev); - if (cls) { - cls >>= 3; - cls++; /* cls = (line_size/8)+1 */ - for (i = 0; i < probe_ent->n_ports; i++) - writew(cls << 8 | cls, - mmio_base + sil_port[i].fifo_cfg); - } else - dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); - - /* Apply R_ERR on DMA activate FIS errata workaround */ - if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { - int cnt; - - for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) { - tmp = readl(mmio_base + sil_port[i].sfis_cfg); - if ((tmp & 0x3) != 0x01) - continue; - if (!cnt) - dev_printk(KERN_INFO, &pdev->dev, - "Applying R_ERR on DMA activate " - "FIS errata fix\n"); - writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); - cnt++; - } - } - - if (ent->driver_data == sil_3114) { - /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + sil_port[2].bmdma); - if ((tmp & SIL_INTR_STEERING) == 0) - writel(tmp | SIL_INTR_STEERING, - mmio_base + sil_port[2].bmdma); - } + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + mmio_base); pci_set_master(pdev); -- cgit v1.1 From afb5a7cb84b1ea8b6045945e3d288303e6b71336 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:27 +0900 Subject: [PATCH] sata_sil: add suspend/sleep support Add suspend/sleep support. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 6033f79..d0a8507 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -109,6 +109,7 @@ enum { }; static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil_pci_device_resume(struct pci_dev *pdev); static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -160,6 +161,8 @@ static struct pci_driver sil_pci_driver = { .id_table = sil_pci_tbl, .probe = sil_init_one, .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, }; static struct scsi_host_template sil_sht = { @@ -178,6 +181,8 @@ static struct scsi_host_template sil_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations sil_ops = { @@ -695,6 +700,18 @@ err_out: return rc; } +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, + host_set->mmio_base); + ata_host_set_resume(host_set); + + return 0; +} + static int __init sil_init(void) { return pci_module_init(&sil_pci_driver); -- cgit v1.1 From 2a41a6108d93a62910d1c36913d83a79b550b40a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:27 +0900 Subject: [PATCH] sata_sil24: separate out sil24_init_controller() Separate out controller initialization from sil24_init_one() into sil24_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 107 +++++++++++++++++++++++++++------------------- 1 file changed, 62 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 04ae1ef..1850c2e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -988,6 +988,64 @@ static void sil24_host_stop(struct ata_host_set *host_set) kfree(hpriv); } +static void sil24_init_controller(struct pci_dev *pdev, int n_ports, + unsigned long host_flags, + void __iomem *host_base, + void __iomem *port_base) +{ + u32 tmp; + int i; + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* clear global reset & mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + /* init ports */ + for (i = 0; i < n_ports; i++) { + void __iomem *port = port_base + i * PORT_REGS_SIZE; + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); + if (tmp & PORT_CS_PORT_RST) + dev_printk(KERN_ERR, &pdev->dev, + "failed to clear port RST\n"); + } + + /* Configure IRQ WoC */ + if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); +} + static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -1076,9 +1134,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - /* GPIO off */ - writel(0, host_base + HOST_FLASH_CMD); - /* Apply workaround for completion IRQ loss on PCI-X errata */ if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(host_base + HOST_CTRL); @@ -1090,56 +1145,18 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } - /* clear global reset & mask interrupts during initialization */ - writel(0, host_base + HOST_CTRL); - for (i = 0; i < probe_ent->n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; - unsigned long portu = (unsigned long)port; + unsigned long portu = + (unsigned long)port_base + i * PORT_REGS_SIZE; probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); - - /* Initial PHY setting */ - writel(0x20c, port + PORT_PHY_CFG); - - /* Clear port RST */ - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_PORT_RST) { - writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_PORT_RST, - PORT_CS_PORT_RST, 10, 100); - if (tmp & PORT_CS_PORT_RST) - dev_printk(KERN_ERR, &pdev->dev, - "failed to clear port RST\n"); - } - - /* Configure IRQ WoC */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); } - /* Turn on interrupts */ - writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + host_base, port_base); pci_set_master(pdev); -- cgit v1.1 From d2298dca9a2ec8a8ff23e251d8aaab00e9d229f9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jul 2006 16:07:27 +0900 Subject: [PATCH] sata_sil24: add suspend/sleep support Add suspend/sleep support. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 1850c2e..2e0f4a4 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -92,6 +92,7 @@ enum { HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ /* * Port registers @@ -338,6 +339,7 @@ static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); static void sil24_host_stop(struct ata_host_set *host_set); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil24_pci_device_resume(struct pci_dev *pdev); static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, @@ -353,6 +355,8 @@ static struct pci_driver sil24_pci_driver = { .id_table = sil24_pci_tbl, .probe = sil24_init_one, .remove = ata_pci_remove_one, /* safe? */ + .suspend = ata_pci_device_suspend, + .resume = sil24_pci_device_resume, }; static struct scsi_host_template sil24_sht = { @@ -372,6 +376,8 @@ static struct scsi_host_template sil24_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations sil24_ops = { @@ -1179,6 +1185,25 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } +static int sil24_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct sil24_host_priv *hpriv = host_set->private_data; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) + writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); + + sil24_init_controller(pdev, host_set->n_ports, + host_set->ports[0]->flags, + hpriv->host_base, hpriv->port_base); + + ata_host_set_resume(host_set); + + return 0; +} + static int __init sil24_init(void) { return pci_module_init(&sil24_pci_driver); -- cgit v1.1 From 5afc81427f79193ed55edd7184ba2b6ce119a649 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 27 Jun 2006 14:51:25 +0200 Subject: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2 This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index fa65b99..386e5f2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1417,7 +1417,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: %s %s\n", ata_id_major_version(id), @@ -1440,7 +1440,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: CHS %u/%u/%u\n", ata_id_major_version(id), @@ -1452,7 +1452,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) if (dev->id[59] & 0x100) { dev->multi_count = dev->id[59] & 0xff; - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n", ap->id, dev->devno, dev->multi_count); @@ -1481,7 +1481,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", ata_mode_string(xfer_mask), cdb_intr_string); @@ -1491,7 +1491,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "applying bridge limits\n"); dev->udma_mask &= ATA_UDMA5; -- cgit v1.1 From 9545b5781cfa822ea1528bc65965dbace0c39a5d Mon Sep 17 00:00:00 2001 From: root Date: Wed, 5 Jul 2006 22:58:20 -0400 Subject: [PATCH] ahci: Ensure that we don't grab both functions When we force the chip into dual fn mode so we get PATA and AHCI we must be sure we don't then do anything dumb like try and grab both with the AHCI driver. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 7447ba0..77e7202a 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1323,6 +1323,17 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* JMicron-specific fixup: make sure we're in AHCI mode */ + /* This is protected from races with ata_jmicron by the pci probe + locking */ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON) { + /* AHCI enable, AHCI on function 0 */ + pci_write_config_byte(pdev, 0x41, 0xa1); + /* Function 1 is the PATA controller */ + if (PCI_FUNC(pdev->devfn)) + return -ENODEV; + } + rc = pci_enable_device(pdev); if (rc) return rc; @@ -1378,10 +1389,6 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (have_msi) hpriv->flags |= AHCI_FLAG_MSI; - /* JMicron-specific fixup: make sure we're in AHCI mode */ - if (pdev->vendor == 0x197b) - pci_write_config_byte(pdev, 0x41, 0xa1); - /* initialize adapter */ rc = ahci_host_init(probe_ent); if (rc) -- cgit v1.1 From 309bade002e9226781c2d7a015340d0089e399b5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Jul 2006 23:02:48 -0400 Subject: [PCI] Add JMicron PCI ID constants They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 685081c..c09396d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2019,6 +2019,13 @@ #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 +#define PCI_VENDOR_ID_JMICRON 0x197B +#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 +#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 +#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363 +#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 +#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 +#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 -- cgit v1.1