From 65111084c63d7674dc37833e8eb59cfdaa4d0bda Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 28 Apr 2005 13:52:31 -0700 Subject: [PATCH] USB: more omap_udc updates (dma and omap1710) More omap_udc updates: * OMAP 1710 updates - new UDC bit for clearing endpoint toggle, affecting CLEAR_HALT - new OTG bits affecting wakeup * Fix the bug Vladimir noted, that IN-DMA transfer code path kicks in for under 1024 bytes (not "up to 1024 bytes") * Handle transceiver setup more intelligently - use transceiver whenever one's available; this can be handy for GPIO based, loopback, or transceiverless configs - cleanup correctly after the "unrecognized HMC" case * DMA performance tweaks - allow burst/pack for memory access - use 16 bit DMA access most of the time on TIPB * Add workarounds for some DMA errata (not observed "in the wild"): - DMA CSAC/CDAC reads returning zero - RX/TX DMA config registers bit 12 always reads as zero (TI patch) * More "sparse" warnings removed, notably "changing" the SETUP packet to return data in USB byteorder (an API change, null effect on OMAP except for these warnings). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 153 +++++++++++++++++++++++++++++----------- drivers/usb/gadget/omap_udc.h | 4 +- include/asm-arm/arch-omap/usb.h | 9 +++ 3 files changed, 125 insertions(+), 41 deletions(-) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 4ec91a6..a2b812a 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -166,7 +166,7 @@ static int omap_ep_enable(struct usb_ep *_ep, maxp = le16_to_cpu (desc->wMaxPacketSize); if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && maxp != ep->maxpacket) - || desc->wMaxPacketSize > ep->maxpacket + || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket || !desc->wMaxPacketSize) { DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); return -ERANGE; @@ -213,7 +213,7 @@ static int omap_ep_enable(struct usb_ep *_ep, ep->has_dma = 0; ep->lch = -1; use_ep(ep, UDC_EP_SEL); - UDC_CTRL_REG = UDC_RESET_EP; + UDC_CTRL_REG = udc->clr_halt; ep->ackwait = 0; deselect_ep(); @@ -537,6 +537,32 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req) /*-------------------------------------------------------------------------*/ +static inline dma_addr_t dma_csac(unsigned lch) +{ + dma_addr_t csac; + + /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is + * read before the DMA controller finished disabling the channel. + */ + csac = omap_readw(OMAP_DMA_CSAC(lch)); + if (csac == 0) + csac = omap_readw(OMAP_DMA_CSAC(lch)); + return csac; +} + +static inline dma_addr_t dma_cdac(unsigned lch) +{ + dma_addr_t cdac; + + /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is + * read before the DMA controller finished disabling the channel. + */ + cdac = omap_readw(OMAP_DMA_CDAC(lch)); + if (cdac == 0) + cdac = omap_readw(OMAP_DMA_CDAC(lch)); + return cdac; +} + static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) { dma_addr_t end; @@ -547,7 +573,7 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) if (cpu_is_omap15xx()) return 0; - end = omap_readw(OMAP_DMA_CSAC(ep->lch)); + end = dma_csac(ep->lch); if (end == ep->dma_counter) return 0; @@ -558,14 +584,14 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) } #define DMA_DEST_LAST(x) (cpu_is_omap15xx() \ - ? OMAP_DMA_CSAC(x) /* really: CPC */ \ - : OMAP_DMA_CDAC(x)) + ? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \ + : dma_cdac(x)) static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start) { dma_addr_t end; - end = omap_readw(DMA_DEST_LAST(ep->lch)); + end = DMA_DEST_LAST(ep->lch); if (end == ep->dma_counter) return 0; @@ -592,7 +618,7 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req) : OMAP_DMA_SYNC_ELEMENT; /* measure length in either bytes or packets */ - if ((cpu_is_omap16xx() && length <= (UDC_TXN_TSC + 1)) + if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC) || (cpu_is_omap15xx() && length < ep->maxpacket)) { txdma_ctrl = UDC_TXN_EOT | length; omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, @@ -601,15 +627,15 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req) length = min(length / ep->maxpacket, (unsigned) UDC_TXN_TSC + 1); txdma_ctrl = length; - omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, - ep->ep.maxpacket, length, sync_mode); + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, + ep->ep.maxpacket >> 1, length, sync_mode); length *= ep->maxpacket; } omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); omap_start_dma(ep->lch); - ep->dma_counter = omap_readw(OMAP_DMA_CSAC(ep->lch)); + ep->dma_counter = dma_csac(ep->lch); UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel); UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl; req->dma_bytes = length; @@ -649,12 +675,12 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req) packets = (req->req.length - req->req.actual) / ep->ep.maxpacket; packets = min(packets, (unsigned)UDC_RXN_TC + 1); req->dma_bytes = packets * ep->ep.maxpacket; - omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, - ep->ep.maxpacket, packets, + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, + ep->ep.maxpacket >> 1, packets, OMAP_DMA_SYNC_ELEMENT); omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); - ep->dma_counter = omap_readw(DMA_DEST_LAST(ep->lch)); + ep->dma_counter = DMA_DEST_LAST(ep->lch); UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1); UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel); @@ -762,7 +788,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) reg = UDC_TXDMA_CFG_REG; else reg = UDC_RXDMA_CFG_REG; - reg |= 1 << 12; /* "pulse" activated */ + reg |= UDC_DMA_REQ; /* "pulse" activated */ ep->dma_channel = 0; ep->lch = -1; @@ -786,6 +812,11 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) ep->ep.name, dma_error, ep, &ep->lch); if (status == 0) { UDC_TXDMA_CFG_REG = reg; + /* EMIFF */ + omap_set_dma_src_burst_mode(ep->lch, + OMAP_DMA_DATA_BURST_4); + omap_set_dma_src_data_pack(ep->lch, 1); + /* TIPB */ omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, @@ -796,10 +827,15 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) ep->ep.name, dma_error, ep, &ep->lch); if (status == 0) { UDC_RXDMA_CFG_REG = reg; + /* TIPB */ omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG)); + /* EMIFF */ + omap_set_dma_dest_burst_mode(ep->lch, + OMAP_DMA_DATA_BURST_4); + omap_set_dma_dest_data_pack(ep->lch, 1); } } if (status) @@ -864,9 +900,13 @@ static void dma_channel_release(struct omap_ep *ep) (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', ep->dma_channel - 1, req); + /* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before + * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them. + */ + /* wait till current packet DMA finishes, and fifo empties */ if (ep->bEndpointAddress & USB_DIR_IN) { - UDC_TXDMA_CFG_REG &= ~mask; + UDC_TXDMA_CFG_REG = (UDC_TXDMA_CFG_REG & ~mask) | UDC_DMA_REQ; if (req) { finish_in_dma(ep, req, -ECONNRESET); @@ -879,7 +919,7 @@ static void dma_channel_release(struct omap_ep *ep) while (UDC_TXDMA_CFG_REG & mask) udelay(10); } else { - UDC_RXDMA_CFG_REG &= ~mask; + UDC_RXDMA_CFG_REG = (UDC_RXDMA_CFG_REG & ~mask) | UDC_DMA_REQ; /* dma empties the fifo */ while (UDC_RXDMA_CFG_REG & mask) @@ -1140,7 +1180,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value) dma_channel_claim(ep, channel); } else { use_ep(ep, 0); - UDC_CTRL_REG = UDC_RESET_EP; + UDC_CTRL_REG = ep->udc->clr_halt; ep->ackwait = 0; if (!(ep->bEndpointAddress & USB_DIR_IN)) { UDC_CTRL_REG = UDC_SET_FIFO_EN; @@ -1514,6 +1554,10 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) UDC_EP_NUM_REG = 0; } while (UDC_IRQ_SRC_REG & UDC_SETUP); +#define w_value le16_to_cpup (&u.r.wValue) +#define w_index le16_to_cpup (&u.r.wIndex) +#define w_length le16_to_cpup (&u.r.wLength) + /* Delegate almost all control requests to the gadget driver, * except for a handful of ch9 status/feature requests that * hardware doesn't autodecode _and_ the gadget API hides. @@ -1528,11 +1572,11 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) /* udc needs to know when ep != 0 is valid */ if (u.r.bRequestType != USB_RECIP_DEVICE) goto delegate; - if (u.r.wLength != 0) + if (w_length != 0) goto do_stall; udc->ep0_set_config = 1; - udc->ep0_reset_config = (u.r.wValue == 0); - VDBG("set config %d\n", u.r.wValue); + udc->ep0_reset_config = (w_value == 0); + VDBG("set config %d\n", w_value); /* update udc NOW since gadget driver may start * queueing requests immediately; clear config @@ -1548,18 +1592,18 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) /* clear endpoint halt */ if (u.r.bRequestType != USB_RECIP_ENDPOINT) goto delegate; - if (u.r.wValue != USB_ENDPOINT_HALT - || u.r.wLength != 0) + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) goto do_stall; - ep = &udc->ep[u.r.wIndex & 0xf]; + ep = &udc->ep[w_index & 0xf]; if (ep != ep0) { - if (u.r.wIndex & USB_DIR_IN) + if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC || !ep->desc) goto do_stall; use_ep(ep, 0); - UDC_CTRL_REG = UDC_RESET_EP; + UDC_CTRL_REG = udc->clr_halt; ep->ackwait = 0; if (!(ep->bEndpointAddress & USB_DIR_IN)) { UDC_CTRL_REG = UDC_SET_FIFO_EN; @@ -1577,11 +1621,11 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) /* set endpoint halt */ if (u.r.bRequestType != USB_RECIP_ENDPOINT) goto delegate; - if (u.r.wValue != USB_ENDPOINT_HALT - || u.r.wLength != 0) + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) goto do_stall; - ep = &udc->ep[u.r.wIndex & 0xf]; - if (u.r.wIndex & USB_DIR_IN) + ep = &udc->ep[w_index & 0xf]; + if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC || ep == ep0 || !ep->desc) @@ -1619,13 +1663,13 @@ ep0out_status_stage: UDC_CTRL_REG = UDC_SET_FIFO_EN; UDC_EP_NUM_REG = UDC_EP_DIR; status = 0; - VDBG("GET_STATUS, interface %d\n", u.r.wIndex); + VDBG("GET_STATUS, interface %d\n", w_index); /* next, status stage */ break; default: delegate: /* activate the ep0out fifo right away */ - if (!udc->ep0_in && u.r.wLength) { + if (!udc->ep0_in && w_length) { UDC_EP_NUM_REG = 0; UDC_CTRL_REG = UDC_SET_FIFO_EN; } @@ -1636,7 +1680,11 @@ delegate: */ VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n", u.r.bRequestType, u.r.bRequest, - u.r.wValue, u.r.wIndex, u.r.wLength); + w_value, w_index, w_length); + +#undef w_value +#undef w_index +#undef w_length /* The gadget driver may return an error here, * causing an immediate protocol stall. @@ -2181,14 +2229,14 @@ static int proc_otg_show(struct seq_file *s) tmp = OTG_REV_REG; trans = USB_TRANSCEIVER_CTRL_REG; - seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %03x\n", + seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n", tmp >> 4, tmp & 0xf, trans); tmp = OTG_SYSCON_1_REG; seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s," FOURBITS "\n", tmp, trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R), trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R), - (USB0_TRX_MODE(tmp) == 0) + (USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710()) ? "internal" : trx_mode(USB0_TRX_MODE(tmp), 1), (tmp & OTG_IDLE_EN) ? " !otg" : "", @@ -2418,6 +2466,10 @@ static inline void remove_proc_file(void) {} /* Before this controller can enumerate, we need to pick an endpoint * configuration, or "fifo_mode" That involves allocating 2KB of packet * buffer space among the endpoints we'll be operating. + * + * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when + * UDC_SYSCON_1_REG.CFG_LOCK is set can now work. We won't use that + * capability yet though. */ static unsigned __init omap_ep_setup(char *name, u8 addr, u8 type, @@ -2690,6 +2742,19 @@ static int __init omap_udc_probe(struct device *dev) FUNC_MUX_CTRL_0_REG = tmp; } } else { + /* The transceiver may package some GPIO logic or handle + * loopback and/or transceiverless setup; if we find one, + * use it. Except for OTG, we don't _need_ to talk to one; + * but not having one probably means no VBUS detection. + */ + xceiv = otg_get_transceiver(); + if (xceiv) + type = xceiv->label; + else if (config->otg) { + DBG("OTG requires external transceiver!\n"); + goto cleanup0; + } + hmc = HMC_1610; switch (hmc) { case 0: /* POWERUP DEFAULT == 0 */ @@ -2706,25 +2771,27 @@ static int __init omap_udc_probe(struct device *dev) case 16: case 19: case 25: - xceiv = otg_get_transceiver(); if (!xceiv) { DBG("external transceiver not registered!\n"); - if (config->otg) - goto cleanup0; type = "unknown"; - } else - type = xceiv->label; + } break; case 21: /* internal loopback */ type = "loopback"; break; case 14: /* transceiverless */ + if (cpu_is_omap1710()) + goto bad_on_1710; + /* FALL THROUGH */ + case 13: + case 15: type = "no"; break; default: +bad_on_1710: ERR("unrecognized UDC HMC mode %d\n", hmc); - return -ENODEV; + goto cleanup0; } } INFO("hmc mode %d, %s transceiver\n", hmc, type); @@ -2741,6 +2808,12 @@ static int __init omap_udc_probe(struct device *dev) udc->gadget.is_otg = (config->otg != 0); #endif + /* starting with omap1710 es2.0, clear toggle is a separate bit */ + if (UDC_REV_REG >= 0x61) + udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE; + else + udc->clr_halt = UDC_RESET_EP; + /* USB general purpose IRQ: ep0, state changes, dma, etc */ status = request_irq(odev->resource[1].start, omap_udc_irq, SA_SAMPLE_RANDOM, driver_name, udc); diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h index c9e6854..652ee46 100644 --- a/drivers/usb/gadget/omap_udc.h +++ b/drivers/usb/gadget/omap_udc.h @@ -20,6 +20,7 @@ #define UDC_CTRL_REG UDC_REG(0x0C) /* Endpoint control */ # define UDC_CLR_HALT (1 << 7) # define UDC_SET_HALT (1 << 6) +# define UDC_CLRDATA_TOGGLE (1 << 3) # define UDC_SET_FIFO_EN (1 << 2) # define UDC_CLR_EP (1 << 1) # define UDC_RESET_EP (1 << 0) @@ -99,6 +100,7 @@ /* DMA configuration registers: up to three channels in each direction. */ #define UDC_RXDMA_CFG_REG UDC_REG(0x40) /* 3 eps for RX DMA */ +# define UDC_DMA_REQ (1 << 12) #define UDC_TXDMA_CFG_REG UDC_REG(0x44) /* 3 eps for TX DMA */ #define UDC_DATA_DMA_REG UDC_REG(0x48) /* rx/tx fifo addr */ @@ -162,6 +164,7 @@ struct omap_udc { spinlock_t lock; struct omap_ep ep[32]; u16 devstat; + u16 clr_halt; struct otg_transceiver *transceiver; struct list_head iso; unsigned softconnect:1; @@ -171,7 +174,6 @@ struct omap_udc { unsigned ep0_set_config:1; unsigned ep0_reset_config:1; unsigned ep0_setup:1; - struct completion *done; }; diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 1438c6c..054fb9a 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -47,6 +47,15 @@ # define HMC_TLLATTACH (1 << 6) # define OTG_HMC(w) (((w)>>0)&0x3f) #define OTG_CTRL_REG OTG_REG32(0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) # define OTG_ASESSVLD (1 << 20) # define OTG_BSESSEND (1 << 19) # define OTG_BSESSVLD (1 << 18) -- cgit v1.1