From 98bbc114bfa0ea1da31e230050b437e19e49e2b3 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Sun, 15 Jun 2014 16:02:17 -0600 Subject: ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX am43xx reset register layout is more similar to am33xx than omap4 so use the am33xx functions for hwmod hardreset soc_ops rather than the currently used omap4 functions. Without this, assert_hardreset and deassert_hardreset will not work on am43xx. Signed-off-by: Dave Gerlach [paul@pwsan.com: fixed build errors for an AM43xx-only Kconfig] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 6 ++++-- arch/arm/mach-omap2/cm33xx.h | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8421f38..8ca99e9 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -110,14 +110,16 @@ obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) -obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) +am33xx-43xx-prcm-common += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common) +obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \ + $(am33xx-43xx-prcm-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 15a778c..bd24417 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index f7bb435..6c074f3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void) soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.assert_hardreset = _am33xx_assert_hardreset; + soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; + soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; -- cgit v1.1 From bf32c4ad9924e2d60a23de4a3c074f806bf2ef05 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Sun, 15 Jun 2014 16:02:18 -0600 Subject: ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Create hwmods for ocp2scp3 and sata modules. [Roger Q] Clean up. CC: Benoit Cousson Signed-off-by: Balaji T K Signed-off-by: Roger Quadros Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 290213f..1103aa0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -2020,6 +2020,77 @@ static struct omap_hwmod omap54xx_wd_timer2_hwmod = { }, }; +/* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ +/* ocp2scp3 */ +static struct omap_hwmod omap54xx_ocp2scp3_hwmod; +/* l4_cfg -> ocp2scp3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap54xx_ocp2scp3_hwmod = { + .name = "ocp2scp3", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'sata' class + * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { + .sysc_offs = 0x0000, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_sata_hwmod_class = { + .name = "sata", + .sysc = &omap54xx_sata_sysc, +}; + +/* sata */ +static struct omap_hwmod omap54xx_sata_hwmod = { + .name = "sata", + .class = &omap54xx_sata_hwmod_class, + .clkdm_name = "l3init_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l4_cfg -> sata */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_sata_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; /* * Interfaces @@ -2765,6 +2836,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_wkup__wd_timer2, + &omap54xx_l4_cfg__ocp2scp3, + &omap54xx_l4_cfg__sata, NULL, }; -- cgit v1.1 From 9188883fd66e9809e93e06d5bbd49cf99a6cdbee Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Jun 2014 01:10:22 -0700 Subject: ARM: dts: Enable twl4030 off-idle configuration for selected omaps N900 now seems to shut down the external oscillator when hitting off-idle. And Beagle XM seems to have OSC_EN pin connected to allow shutting down the oscillator looking at the schematics. The oscillator output is cut off in off-idle and you can monitor it from R56 on the bottom side of the board near the power jack. Note that for beagle we need to also enable the UART wake-up event, the others have that enabled in earlier patches. OMAP37XX EVM (TMDSEVM3730) does not seem to have twl4030 clken pin connected, so there is no point trying to enable shutting down of the oscillator on it for the extra latency it adds. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 7 +++++++ arch/arm/boot/dts/omap3-n900.dts | 5 +++++ 3 files changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cf0be66..1becefc 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -251,6 +251,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -301,6 +306,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 8ae8f00..c8747c7 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -50,6 +50,13 @@ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; }; +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index ae8ae3f..1fe45d1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -351,6 +351,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_keypad { -- cgit v1.1 From 73d202807a1ca7225d7b79d5e403cc48bf0adfdc Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 29 May 2014 14:05:50 -0500 Subject: ARM: DRA722: add detection of SoC information Add support for DRA72x device DIEID. Currently these devices are reported as DRA75/74 family of processors. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 12 ++++++++++++ arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 13 insertions(+) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 43969da..d42022f 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -649,6 +649,18 @@ void __init dra7xxx_check_revision(void) } break; + case 0xb9bc: + switch (rev) { + case 0: + omap_revision = DRA722_REV_ES1_0; + break; + default: + /* If we have no new revisions */ + omap_revision = DRA722_REV_ES1_0; + break; + } + break; + default: /* Unknown default to latest silicon rev as default*/ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index de2a34c..01ca808 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -462,6 +462,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) +#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); -- cgit v1.1 From 05e7d1a57a268b491d0e24952d219a73c62bd3df Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 5 Jun 2014 20:09:46 -0500 Subject: ARM: dts: omap5: Update CPU OPP table as per final production Manual As per the Final production Data Manual for OMAP5432, SWPS050F(APRIL 2014) There are only two OPPs - 1GHz and 1.5GHz. the older OPP_LOW has been completely descoped. The Nominal voltages are still correct though. However, expectation for final production configuration is operation with Adaptive Body Bias (ABB) and Adaptive Voltage Scaling Class 0 operation. There are no IDcode or version change information encoded to programmatically detect this and software is supposed to NOT use OPP_LOW(500MHz) anymore for all devices (legacy and production samples). Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16..a4ed549 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; -- cgit v1.1 From fe797553e7f1acbce807e2ee3d86ca01c0e28b92 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 6 Jun 2014 11:47:34 +0530 Subject: ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm AM437x EPOS evm use external clock for RMII interface. Enable the same in DT. Signed-off-by: George Cherian Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 19f1f7e..90098f9 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -319,6 +319,10 @@ phy-mode = "rmii"; }; +&phy_sel { + rmii-clock-ext; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.1 From b7196ab07890bb1bc8f364dc341ee1251919111b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 10 Jun 2014 14:26:36 -0700 Subject: ARM: OMAP2+: drop unused function gic_init_irq() is no longer used as of: commit b42b918194c4791510ac049e3d507169a7de8544 Author: Tony Lindgren Date: Thu May 30 12:53:05 2013 -0700 ARM: OMAP2+: Remove board-omap4panda.c Drop it. Signed-off-by: Brian Norris Cc: Tony Lindgren Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 1 - arch/arm/mach-omap2/omap4-common.c | 20 -------------------- 2 files changed, 21 deletions(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff02973..51f6897 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -241,7 +241,6 @@ static inline void __iomem *omap4_get_scu_base(void) } #endif -extern void __init gic_init_irq(void); extern void gic_dist_disable(void); extern void gic_dist_enable(void); extern bool gic_dist_disabled(void); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 326cd98..539e810 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -102,26 +102,6 @@ void __init omap_barriers_init(void) {} #endif -void __init gic_init_irq(void) -{ - void __iomem *omap_irq_base; - - /* Static mapping, never released */ - gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); - BUG_ON(!gic_dist_base_addr); - - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); - BUG_ON(!twd_base); - - /* Static mapping, never released */ - omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!omap_irq_base); - - omap_wakeupgen_init(); - - gic_init(0, 29, gic_dist_base_addr, omap_irq_base); -} - void gic_dist_disable(void) { if (gic_dist_base_addr) -- cgit v1.1 From 2ca0945fc103bac7e6469682b8e012d6bff5b9c4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:48 +0300 Subject: ARM: DTS: dra7/dra7xx-clocks: ATL related changes Modify the clock nodes for the ATL clocks to use the ATL clock driver to handle them. Add the ATL device node at the same time for DRA7. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++ arch/arm/boot/dts/dra7xx-clocks.dtsi | 16 ++++++++-------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c29945e..dca96b9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -984,6 +984,17 @@ #size-cells = <1>; status = "disabled"; }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe4..c90c76d 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -10,26 +10,26 @@ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; hdmi_clkin_ck: hdmi_clkin_ck { -- cgit v1.1 From c021f241f4fab2bb4fc4120a38a828a03dd3f970 Mon Sep 17 00:00:00 2001 From: "David R. Piegdon" Date: Mon, 16 Jun 2014 23:42:51 +0000 Subject: ARM: OMAP2+: Fix parser-bug in platform muxing code Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fd88ede..f62f753 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -183,8 +183,10 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, m0_entry = mux->muxnames[0]; /* First check for full name in mode0.muxmode format */ - if (mode0_len && strncmp(muxname, m0_entry, mode0_len)) - continue; + if (mode0_len) + if (strncmp(muxname, m0_entry, mode0_len) || + (strlen(m0_entry) != mode0_len)) + continue; /* Then check for muxmode only */ for (i = 0; i < OMAP_MUX_NR_MODES; i++) { -- cgit v1.1 From edc56f871eefbc56baf1fd981eeff35ef447925c Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 17 Jun 2014 12:29:21 +0530 Subject: ARM: dts: dra7-evm: remove interrupt binding The qspi node defines crossbar number as its interrupt number. But, the crossbar dts patches are not yet there, this causes a warning during boot. So interrupts = < > property should be removed from DT and added later by crossbar series. Reported-by: Sricharan R Signed-off-by: Sourav Poddar Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index dca96b9..8012763 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -773,7 +773,6 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; - interrupts = <0 343 0x4>; status = "disabled"; }; -- cgit v1.1