From 105462632c37ea5484ebae7db6e85e0aaac28f4b Mon Sep 17 00:00:00 2001 From: Anders Blomdell Date: Fri, 24 Oct 2008 14:54:08 +0200 Subject: avr32: Enable pullup on USART TX lines Make USART initialization conform to Section 24.6.1 in the AT32AP7000 manual, i.e. "To prevent the TXD line from falling when the USART is disabled, the use of an internal pull up is mandatory." Signed-off-by: Anders Blomdell [haavard.skinnemoen@atmel.com: enable pullup on RX as well] Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 0c6e02f..066252e 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void) { u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ - select_peripheral(PIOA, pin_mask, PERIPH_B, 0); + select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static inline void configure_usart1_pins(void) { u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ - select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); } static inline void configure_usart2_pins(void) { u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ - select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static inline void configure_usart3_pins(void) { u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ - select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static struct platform_device *__initdata at32_usarts[4]; -- cgit v1.1 From b21227c5fcadab206e2a2373e5b288a351919abb Mon Sep 17 00:00:00 2001 From: "Hillier, Gernot" Date: Wed, 17 Sep 2008 16:03:06 +0200 Subject: [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S A lot of 64bit machines with Adaptec 2200S and 2120S controllers don't recognize SCSI disks any more with the patch commit 94cf6ba11b068b8a8f68a1e88bffb6827e92124b Author: Salyzyn, Mark Date: Thu Dec 13 16:14:18 2007 -0800 [SCSI] aacraid: fix driver failure with Dell PowerEdge Expandable RAID Controller 3/Di but fail with tons of "aac_srb: aac_fib_send failed with status: 8195" instead. This patch disables the quirk introduced in the change cited above for those two controllers again. [thenzl: added 2120S Controller] Signed-off-by: Gernot Hillier Signed-off-by: Tomas Henzl Acked-by: Matt Domsch Cc: AACRAID list Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/aacraid/linit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 162cd92..94acbee 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ -- cgit v1.1 From d3acf0226debeae22d87808f8f298386bd08e391 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 1 Dec 2008 12:13:00 -0600 Subject: [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools This regression was added in 2.6.27, when the mtask and ctask were merged into the the common task struct. The patch applies to scsi-rc-fixes, but also applies to 2.6.27 with some offsets. The problem is that __iscsi_conn_send_pdu assumes that userspace was not sending nops with the format it is checking for in the "if" below. It turns out that older userspace tools are. This patch moves the setting of the internal ping_task tracker (it tracks libiscsi current outstanding nop) to iscsi_send_nopout which is only used by kernel callers. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 801c7cf..3fdee73 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (!__kfifo_get(session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; - - if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) && - hdr->ttt == RESERVED_ITT) { - conn->ping_task = task; - conn->last_ping = jiffies; - } } /* * released in complete pdu for task we expect a response for, and @@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); if (!task) iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); + else if (!rhdr) { + /* only track our nops */ + conn->ping_task = task; + conn->last_ping = jiffies; + } } static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, -- cgit v1.1 From 532d3b1f86f41834a25373e3ded981d68e4ce17f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 3 Dec 2008 17:16:55 -0700 Subject: ioat: wait for self-test completion As part of the ioat_dma self-test it performs a printk from a completion callback. Depending on the system console configuration this output can take longer than a millisecond causing the self-test to fail. Introduce a completion with a generous timeout to mitigate this failure. Cc: Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index ecd743f..6607fdd 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) */ #define IOAT_TEST_SIZE 2000 +DECLARE_COMPLETION(test_completion); static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", dma_async_param); + complete(&test_completion); } /** @@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device) goto free_resources; } device->common.device_issue_pending(dma_chan); - msleep(1); + + wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000)); if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) { -- cgit v1.1 From b0b42b16ff2b90f17bc1a4308366c9beba4b276e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 3 Dec 2008 17:17:07 -0700 Subject: dmaengine: protect 'id' from concurrent registrations There is a possibility to have two devices registered with the same id. Cc: Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 5317e08..6579965 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device) init_completion(&device->done); kref_init(&device->refcount); + + mutex_lock(&dma_list_mutex); device->dev_id = id++; + mutex_unlock(&dma_list_mutex); /* represent channels in sysfs. Probably want devs too */ list_for_each_entry(chan, &device->channels, device_node) { -- cgit v1.1 From a06d568f7c5e40e34ea64881842deb8f4382babf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 8 Dec 2008 13:46:00 -0700 Subject: async_xor: dma_map destination DMA_BIDIRECTIONAL Mapping the destination multiple times is a misuse of the dma-api. Since the destination may be reused as a source, ensure that it is only mapped once and that it is mapped bidirectionally. This appears to add ugliness on the unmap side in that it always reads back the destination address from the descriptor, but gcc can determine that dma_unmap is a nop and not emit the code that calculates its arguments. Cc: Cc: Saeed Bishara Acked-by: Yuri Tikhonov Signed-off-by: Dan Williams --- crypto/async_tx/async_xor.c | 11 +++++++++-- drivers/dma/iop-adma.c | 16 +++++++++++++--- drivers/dma/mv_xor.c | 15 ++++++++++++--- 3 files changed, 34 insertions(+), 8 deletions(-) diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index c029d3e..595b786 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -53,10 +53,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list, int xor_src_cnt; dma_addr_t dma_dest; - dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE); - for (i = 0; i < src_cnt; i++) + /* map the dest bidrectional in case it is re-used as a source */ + dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL); + for (i = 0; i < src_cnt; i++) { + /* only map the dest once */ + if (unlikely(src_list[i] == dest)) { + dma_src[i] = dma_dest; + continue; + } dma_src[i] = dma_map_page(dma->dev, src_list[i], offset, len, DMA_TO_DEVICE); + } while (src_cnt) { async_flags = flags; diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index c7a9306..6be3172 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = iop_desc_get_dest_addr(unmap, iop_chan); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = iop_desc_get_dest_addr(unmap, iop_chan); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 0328da0..bcda174 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = mv_desc_get_dest_addr(unmap); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = mv_desc_get_dest_addr(unmap); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor ? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = mv_desc_get_src_addr(unmap, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } -- cgit v1.1 From 57458036af75c6dbb62bee04b3982e92261eddb1 Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 9 Dec 2008 20:03:50 +0900 Subject: [SCSI] ibmvstgt: move crq_queue_create to the end of initialization Calling crq_queue_create could lead to the creation of a rport. We need to set up everything before creating a rport. This moves crq_queue_create to the end of initialization to avoid a race which causes an oops if lost. Signed-off-by: Brian King Signed-off-by: FUJITA Tomonori Reported-by: Olaf Hering Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvstgt.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 2a5b29d..e2dd6a4 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&vport->crq_work, handle_crq); - err = crq_queue_create(&vport->crq_queue, target); + err = scsi_add_host(shost, target->dev); if (err) goto free_srp_target; - err = scsi_add_host(shost, target->dev); + err = scsi_tgt_alloc_queue(shost); if (err) - goto destroy_queue; + goto remove_host; - err = scsi_tgt_alloc_queue(shost); + err = crq_queue_create(&vport->crq_queue, target); if (err) - goto destroy_queue; + goto free_queue; return 0; -destroy_queue: - crq_queue_destroy(target); +free_queue: + scsi_tgt_free_queue(shost); +remove_host: + scsi_remove_host(shost); free_srp_target: srp_target_free(target); put_host: -- cgit v1.1 From 02bd3499a3be984f1e88821c3ed252c8c49c498e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 12 Dec 2008 13:28:29 -0600 Subject: [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock It's called under that lock everywhere else and it does alter the request state, so it should be. This one occurance in scsi_requeue_command() could open a window where req->special is set to NULL while the requests is going through either timeout or completion processing leading to NULL pointer derefs of the sort complained of in bugzillas 12020 and 12195. Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index fa45a1a..148d3af 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) struct request *req = cmd->request; unsigned long flags; - scsi_unprep_request(req); spin_lock_irqsave(q->queue_lock, flags); + scsi_unprep_request(req); blk_requeue_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); -- cgit v1.1 From 092cab7e2cd868cb0b30209a0337689c3ffd6133 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 Dec 2008 01:19:41 -0800 Subject: netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC This patch fixes an inconsistency in nfnetlink_conntrack.h that I introduced myself. The problem is that CTA_NAT_SEQ_UNSPEC is missing from enum ctattr_natseq. This inconsistency may lead to problems in the message parsing in userspace (if the message contains the CTA_NAT_SEQ_* attributes, of course). This patch breaks backward compatibility, however, the only known client of this code is libnetfilter_conntrack which indeed crashes because it assumes the existence of CTA_NAT_SEQ_UNSPEC to do the parsing. The CTA_NAT_SEQ_* attributes were introduced in 2.6.25. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index c19595c..29fe9ea 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -141,6 +141,7 @@ enum ctattr_protonat { #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1) enum ctattr_natseq { + CTA_NAT_SEQ_UNSPEC, CTA_NAT_SEQ_CORRECTION_POS, CTA_NAT_SEQ_OFFSET_BEFORE, CTA_NAT_SEQ_OFFSET_AFTER, -- cgit v1.1 From 8953f1282793882a5444924f7a273dc72a43d0a3 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 16 Dec 2008 01:44:05 -0800 Subject: tlan: Fix small (< 64 bytes) datagram transmissions The TLAN chip does not support tranmissions smaller than 64 bytes. Smaller transfers need to be padded up to that size. This was broken by commit id 41873e9aff0632d80c74380d58a89e8d420151bd ("tlan: get rid of padding buffer"). Signed-off-by: Sakari Ailus Signed-off-by: David S. Miller --- drivers/net/tlan.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index c41d687..cf8cdaf 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) dma_addr_t tail_list_phys; u8 *tail_buffer; unsigned long flags; + unsigned int txlen; if ( ! priv->phyOnline ) { TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", @@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) return 0; + txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); tail_list = priv->txList + priv->txTail; tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail; @@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if ( bbuf ) { tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE ); - skb_copy_from_linear_data(skb, tail_buffer, skb->len); + skb_copy_from_linear_data(skb, tail_buffer, txlen); } else { tail_list->buffer[0].address = pci_map_single(priv->pciDev, - skb->data, skb->len, + skb->data, txlen, PCI_DMA_TODEVICE); TLan_StoreSKB(tail_list, skb); } - tail_list->frameSize = (u16) skb->len; - tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len; + tail_list->frameSize = (u16) txlen; + tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; tail_list->buffer[1].count = 0; tail_list->buffer[1].address = 0; -- cgit v1.1 From 2c413a6434dca02387a263dc4ca8009692421998 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 15 Dec 2008 20:18:52 +0000 Subject: enc28j60: use netif_rx_ni() to deliver RX packets The enc28j60 driver reads incoming packets in the process (workqueue) context, not in a tasklet or the interrupt context. Thus, we should use netif_rx_ni() to deliver those packets to the networking layer, instead of netif_rx(). This way incoming packets don't wait in the incoming queue for the next IRQ to be serviced. Signed-off-by: Baruch Siach Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c414554..36cb6e9 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_packets++; ndev->stats.rx_bytes += len; ndev->last_rx = jiffies; - netif_rx(skb); + netif_rx_ni(skb); } } /* -- cgit v1.1 From 83fd5cc6481c6b7fa8b45f8a7e0aa7120213430b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 16 Dec 2008 19:17:11 +0100 Subject: AMD IOMMU: allocate rlookup_table with __GFP_ZERO Impact: fix bug which can lead to panic in prealloc_protection_domains() Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 30ae270..c90a15e 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1074,7 +1074,8 @@ int __init amd_iommu_init(void) goto free; /* IOMMU rlookup table - find the IOMMU for a specific device */ - amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL, + amd_iommu_rlookup_table = (void *)__get_free_pages( + GFP_KERNEL | __GFP_ZERO, get_order(rlookup_table_size)); if (amd_iommu_rlookup_table == NULL) goto free; -- cgit v1.1 From 4b330bee66e88c94789d2eea250dd1fd454a645e Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 1 Dec 2008 06:51:14 -0300 Subject: V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button A user noticed that there would continue to be 4-6 keypresses even after the user stopped holding down the button. This was because we were not reading the bulk pipe faster than the firmware was injecting information, which would result in a backlog. Make the query interval faster, and increase the number of cycles before we start repeating to compensate. Thanks to Knud Poulsen for pointing this out. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index f28d3ae..3917327 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) == NULL ? -ENODEV : 0; } -#define DEFAULT_RC_INTERVAL 150 +#define DEFAULT_RC_INTERVAL 50 static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY 2 -#define RC_REPEAT_DELAY_V1_20 5 +#define RC_REPEAT_DELAY 6 +#define RC_REPEAT_DELAY_V1_20 10 -- cgit v1.1 From 11c6c7fb89a7526841eb4f294de631f3b8a31f10 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= Date: Mon, 1 Dec 2008 06:59:37 -0300 Subject: V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At some point the Flexcop driver was changed to support newer Flexcop cards. These modifications however broke the detection of Cablestar 2 DVB-C cards. The reason is that the earlier version of the driver used to retry unsuccessful i2c operations. The demodulator of Cablestar 2 cards (stv0297) seems to be very dependent on these retries and adding them back fixes Cablestar detection. This patch restores this behaviour for the CableStar2. Signed-off-by: Antti Seppälä Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 2 ++ drivers/media/dvb/b2c2/flexcop-i2c.c | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index a127a41..5cded37 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc) } /* try the cable dvb (stv0297) */ + fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; goto fe_found; } + fc->fc_i2c_adap[0].no_base_addr = 0; /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ fc->fe = dvb_attach(mt312_attach, diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 43a112e..f13783f 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; - r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; ret = flexcop_i2c_operation(i2c->fc, &r100); if (ret != 0) { + deb_i2c("Retrying operation\n"); + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + } + if (ret != 0) { deb_i2c("read failed. %d\n", ret); return ret; } -- cgit v1.1 From f86d4a9173e47050de9f88faa4aaf70a718791c5 Mon Sep 17 00:00:00 2001 From: Jim Paris Date: Wed, 10 Dec 2008 05:50:44 -0300 Subject: V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking. Signed-off-by: Jim Paris Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 748a87e..02a6e9e 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, struct gspca_dev *gspca_dev = priv; int ret; - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; if (!gspca_dev->sd_desc->set_jcomp) return -EINVAL; + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp); mutex_unlock(&gspca_dev->usb_lock); return ret; -- cgit v1.1 From 8b21c1e90e633aee3363e3d87e1a0b829bdb420e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 14 Dec 2008 19:39:03 -0300 Subject: V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 When the tuner modules were moved to common/tuners, a separate customize option were added for tuners. However, the automatic selection of the tuners were still using the older option. This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the tuners. This patch fixes this error by replacing DVB_FE_CUSTOMISE by MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected. The patch were generated by this small script: for i in `find drivers/media -name Kconfig`; do cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a mv a $i done Also, manually reordered the tuner entries. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/Kconfig | 2 +- drivers/media/dvb/bt8xx/Kconfig | 2 +- drivers/media/dvb/dvb-usb/Kconfig | 46 ++++++++++++++++++------------------- drivers/media/dvb/ttpci/Kconfig | 2 +- drivers/media/video/cx18/Kconfig | 2 +- drivers/media/video/cx23885/Kconfig | 4 ++-- drivers/media/video/cx88/Kconfig | 2 +- drivers/media/video/pvrusb2/Kconfig | 2 +- drivers/media/video/saa7134/Kconfig | 4 ++-- 9 files changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 73dc2ee..b34301d 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_BCM3510 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1420 if !DVB_FE_CUSTOMISE select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index 7e9c090..27edb0e 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -8,7 +8,7 @@ config DVB_BT8XX select DVB_OR51211 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for PCI cards based on the Bt8xx PCI bridge. Examples are the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 62b68c2..49f7b20 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -24,8 +24,8 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-B demodulator. @@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-C/P demodulator. @@ -73,11 +73,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000M select DVB_DIB3000MC select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB @@ -95,7 +95,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -107,11 +107,11 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -124,9 +124,9 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -137,7 +137,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -146,7 +146,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -235,8 +235,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) @@ -284,7 +284,7 @@ config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. @@ -293,9 +293,9 @@ config DVB_USB_AF9015 depends on DVB_USB && EXPERIMENTAL select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 867027c..401a04e 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -106,7 +106,7 @@ config DVB_BUDGET_CI select DVB_TDA1004X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE select VIDEO_IR help Support for simple SAA7146 based DVB cards diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig index ef48565..8940b53 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/video/cx18/Kconfig @@ -9,7 +9,7 @@ config VIDEO_CX18 select VIDEO_CX2341X select VIDEO_CS5345 select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 8c1b7fa4..00f1e2e 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -11,16 +11,16 @@ config VIDEO_CX23885 select VIDEO_CX25840 select VIDEO_CX2341X select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE - select DVB_TDA10048 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 0b9e5fa..b0f8375 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -56,12 +56,12 @@ config VIDEO_CX88_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_STV0288 if !DVB_FE_CUSTOMISE select DVB_STB6000 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index 19eb274..854c2a8 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_TDA10048 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE ---help--- diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 7021bbf..fc2164e 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB cards based on the Philips saa7134 chip. -- cgit v1.1 From 3ca81a55256f38d9a8a4d5e9a6a9288ddc672e19 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Dec 2008 08:32:37 -0300 Subject: V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well. The v4l_compat_ioctl32() function only tested for the presence of the ioctl op, not for unlocked_ioctl. So it would always return an error when used with drivers that use unlocked_ioctl instead of ioctl. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/compat_ioctl32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index e6ca401..0ea85a0 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { int ret = -ENOIOCTLCMD; - if (!file->f_op->ioctl) + if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl) return ret; switch (cmd) { -- cgit v1.1 From a6da74cb077e88a604e5b2a6663b44c221f0ae75 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 15 Dec 2008 14:13:27 -0600 Subject: [SCSI] mpt fusion: clear list of outstanding commands on host reset A bug in the fusion driver was exposed by the switch to block timeout. Basically, drivers are supposed to terminate commands once error handling begins on them. The fusion apparently wasn't doing this. Under the old timeout regime, completions on terminated commands would by and large get ignored because of the way command timeouts used to work. The new block timers are very intolerant to this, though, becuase the request gets cleaned and freed. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=12195 Reported-by: Alex Shi Tested-by: Ming Lin Cc: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptscsih.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index d62fd4f..ee09041 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) return FAILED; } + /* make sure we have no outstanding commands at this stage */ + mptscsih_flush_running_cmds(hd); + ioc = hd->ioc; printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", ioc->name, SCpnt); -- cgit v1.1 From b0b801dd7de3d77bb143d3c98199b487df0fc63a Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Mon, 1 Dec 2008 16:31:06 +0900 Subject: PCI: fix aer resume sanity check What we have to check here before calling is err_handler->resume, not ->slot_reset. Looks like a copy & paste error from report_slot_reset. Acked-by: Yanmin Zhang Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aerdrv_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index dfc63d0..aac7006 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || - !dev->driver->err_handler->slot_reset) + !dev->driver->err_handler->resume) return; err_handler = dev->driver->err_handler; -- cgit v1.1 From db9aaf0bf19886114935152996edd9c6683b741c Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 8 Dec 2008 14:30:24 +0900 Subject: PCI: pciehp: fix unexpected power off with pciehp_force This patch fixes the problem that causes an occupied slot to be turned off even if it has a working device. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 4b23bc3..39cf248 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - - t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ - if (value && pciehp_force) { - rc = pciehp_enable_slot(t_slot); - if (rc) /* -ENODEV: shouldn't happen, but deal with it */ - value = 0; - } - if ((POWER_CTRL(ctrl)) && !value) { - rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ - if (rc) - goto err_out_free_ctrl_slot; + t_slot->hpc_ops->get_adapter_status(t_slot, &value); + if (value) { + if (pciehp_force) + pciehp_enable_slot(t_slot); + } else { + /* Power off slot if not occupied */ + if (POWER_CTRL(ctrl)) { + rc = t_slot->hpc_ops->power_off_slot(t_slot); + if (rc) + goto err_out_free_ctrl_slot; + } } return 0; -- cgit v1.1 From b6adc1955d31515be6631e63b1fe4bcdcd41db77 Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Thu, 11 Dec 2008 11:16:44 -0700 Subject: PCI hotplug: acpiphp wants a 64-bit _SUN Certain HP machines require the full 64 bits of _SUN as allowed by the ACPI spec. Without this change, we get name collisions in the lower 32 bits of the _SUN returned by firmware. Acked-by: Matthew Wilcox Signed-off-by: Justin Chen Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp.h | 2 +- drivers/pci/hotplug/acpiphp_core.c | 2 +- drivers/pci/hotplug/acpiphp_glue.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index f9e244d..9bcb6cb 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -113,7 +113,7 @@ struct acpiphp_slot { u8 device; /* pci device# */ - u32 sun; /* ACPI _SUN (slot unique number) */ + unsigned long long sun; /* ACPI _SUN (slot unique number) */ u32 flags; /* see below */ }; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 95b536a..43c10bd 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 955aae4..3affc64 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) bridge->nr_slots++; - dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", + dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n", slot->sun, pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, slot->device); retval = acpiphp_register_hotplug_slot(slot); if (retval) { if (retval == -EBUSY) - warn("Slot %d already registered by another " + warn("Slot %llu already registered by another " "hotplug driver\n", slot->sun); else warn("acpiphp_register_hotplug_slot failed " -- cgit v1.1 From cf9b303e55da810255638c0b616b1a3f7eda9320 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 15 Dec 2008 23:33:10 +0100 Subject: x86: re-enable MCE on secondary CPUS after suspend/resume Impact: fix disabled MCE after resume Don't prevent multiple initialization of MCEs. Back from early prehistory mcheck_init() has a reentry check. Presumably that was needed in very old kernels to prevent it entering twice. But as Andreas points out this prevents CPU hotplug (and therefore resume) to correctly reinitialize MCEs when a AP boots again after being offlined. Just drop the check. Reported-by: Andreas Herrmann Signed-off-by: Andi Kleen Tested-by: Andreas Herrmann Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_64.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 4b031a4..1c83803 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -510,12 +510,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) */ void __cpuinit mcheck_init(struct cpuinfo_x86 *c) { - static cpumask_t mce_cpus = CPU_MASK_NONE; - mce_cpu_quirks(c); if (mce_dont_init || - cpu_test_and_set(smp_processor_id(), mce_cpus) || !mce_available(c)) return; -- cgit v1.1 From bb5f133dbc4f04b6388715d364ae5865455166c2 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 16 Dec 2008 15:22:41 -0800 Subject: tlan: Fix pci memory unmapping Fix pci unmapping problem introduced by commit id 8953f1282793882a5444924f7a273dc72a43d0a3 "tlan: Fix small (< 64 bytes) datagram transmissions". Signed-off-by: Sakari Ailus Signed-off-by: David S. Miller --- drivers/net/tlan.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index cf8cdaf..e604982 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1433,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) if ( ! bbuf ) { struct sk_buff *skb = TLan_GetSKB(head_list); pci_unmap_single(priv->pciDev, head_list->buffer[0].address, - skb->len, PCI_DMA_TODEVICE); + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); head_list->buffer[8].address = 0; head_list->buffer[9].address = 0; @@ -2057,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev ) list = priv->txList + i; skb = TLan_GetSKB(list); if ( skb ) { - pci_unmap_single(priv->pciDev, - list->buffer[0].address, skb->len, - PCI_DMA_TODEVICE); + pci_unmap_single( + priv->pciDev, + list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any( skb ); list->buffer[8].address = 0; list->buffer[9].address = 0; -- cgit v1.1 From 9a3de25544dadab1971847f28f33b1cd0d1770a6 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Tue, 16 Dec 2008 15:42:20 -0800 Subject: drivers/net: starfire: Fix napi ->poll() weight handling starfire napi ->poll() handler can return work == weight after calling netif_rx_complete() (if there is no more work). It is illegal and this patch fixes it. Reported-by: Alexander Huemer Tested-by: Alexander Huemer Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- drivers/net/starfire.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 1d2ef8f..5a40f2d 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota) desc->status = 0; np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } writew(np->rx_done, np->base + CompletionQConsumerIdx); out: -- cgit v1.1 From 878a5535957b563c447d32866a9e606c55fef091 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Dec 2008 21:55:44 -0800 Subject: sparc: We need to implement arch_ptrace_stop(). In order to always provide fully synchronized state to the debugger, we might need to do a synchronize_user_stack(). A pair of hooks, arch_ptrace_stop_needed() and arch_ptrace_stop(), exist to handle this kind of situation. It was created for the sake of IA64. Use them, to flush the kernel side cached register windows to the user stack, when necessary. Signed-off-by: David S. Miller --- arch/sparc/include/asm/ptrace_32.h | 10 ++++++++++ arch/sparc/include/asm/ptrace_64.h | 9 +++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h index d409c4f..4cef450 100644 --- a/arch/sparc/include/asm/ptrace_32.h +++ b/arch/sparc/include/asm/ptrace_32.h @@ -62,6 +62,8 @@ struct sparc_stackf { #ifdef __KERNEL__ +#include + static inline bool pt_regs_is_syscall(struct pt_regs *regs) { return (regs->psr & PSR_SYSCALL); @@ -72,6 +74,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs) return (regs->psr &= ~PSR_SYSCALL); } +#define arch_ptrace_stop_needed(exit_code, info) \ +({ flush_user_windows(); \ + current_thread_info()->w_saved != 0; \ +}) + +#define arch_ptrace_stop(exit_code, info) \ + synchronize_user_stack() + #define user_mode(regs) (!((regs)->psr & PSR_PS)) #define instruction_pointer(regs) ((regs)->pc) #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 84e969f..cd6fbfc 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -114,6 +114,7 @@ struct sparc_trapf { #ifdef __KERNEL__ #include +#include static inline int pt_regs_trap_type(struct pt_regs *regs) { @@ -130,6 +131,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs) return (regs->tstate &= ~TSTATE_SYSCALL); } +#define arch_ptrace_stop_needed(exit_code, info) \ +({ flush_user_windows(); \ + get_thread_wsaved() != 0; \ +}) + +#define arch_ptrace_stop(exit_code, info) \ + synchronize_user_stack() + struct global_reg_snapshot { unsigned long tstate; unsigned long tpc; -- cgit v1.1 From e8e5752dc0a56a01527055b0c37510b1d6b6b861 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Wed, 17 Dec 2008 00:24:13 -0800 Subject: net: kernel BUG at drivers/net/phy/mdio_bus.c:165! kernel BUG at drivers/net/phy/mdio_bus.c:165! Unable to handle kernel NULL pointer dereference at virtual address 00000000 How? mdiobus_alloc() sets bus->state = MDIOBUS_ALLOCATED. mdiobus_register() sets bus->state = MDIOBUS_REGISTERED but then can fail (mdiobus_scan()) returning an error to the caller. The caller aborts correctly with mdiobus_free() which does: if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); Signed-off-by: Krzysztof Halasa Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 536bda1..289fc26 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus) return -EINVAL; } - bus->state = MDIOBUS_REGISTERED; - mutex_init(&bus->mdio_lock); if (bus->reset) @@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus) } } + if (!err) + bus->state = MDIOBUS_REGISTERED; + pr_info("%s: probed\n", bus->name); return err; -- cgit v1.1 From 2fccd2814f8ebc8f1bd325dc46e11c333fc76ab3 Mon Sep 17 00:00:00 2001 From: cwm97m Date: Tue, 16 Dec 2008 20:28:44 +0000 Subject: jme: Fixed a typo Found a typo. Signed-off-by: Wei-Min Chen Signed-off-by: David S. Miller --- drivers/net/jme.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/jme.h b/drivers/net/jme.h index f863aee..3f5d915 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -22,7 +22,7 @@ */ #ifndef __JME_H_INCLUDED__ -#define __JME_H_INCLUDEE__ +#define __JME_H_INCLUDED__ #define DRV_NAME "jme" #define DRV_VERSION "1.0.3" -- cgit v1.1 From c1892cb8d2787280a5d9aacf8f58cf18f5b6fb2f Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 26 Nov 2008 11:40:42 +0100 Subject: avr32: remove .note.gnu.build-id section when making vmlinux.bin This patch will remove the section .note.gnu.build-id added in binutils 2.18 from the vmlinux.bin binary. Not removing this section results in a huge multiple gigabyte binary and likewize large uImage. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/boot/images/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile index 219720a..1848bf0 100644 --- a/arch/avr32/boot/images/Makefile +++ b/arch/avr32/boot/images/Makefile @@ -10,7 +10,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh extra-y := vmlinux.bin vmlinux.gz -OBJCOPYFLAGS_vmlinux.bin := -O binary +OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -- cgit v1.1 From a67534a7824c7ef3c4c377f82e60fcaa137f9a2c Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 10 Dec 2008 09:09:27 -0300 Subject: V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only Posting to linux-uvc-devel is restricted to members. You can subscribe to the list at ... MAINTAINERS | 2 +- Signed-off-by: Jiri Slaby Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 24741de..d92299e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4529,7 +4529,7 @@ S: Maintained USB VIDEO CLASS P: Laurent Pinchart M: laurent.pinchart@skynet.be -L: linux-uvc-devel@lists.berlios.de +L: linux-uvc-devel@lists.berlios.de (subscribers-only) L: video4linux-list@redhat.com W: http://linux-uvc.berlios.de S: Maintained -- cgit v1.1 From cf558d25e5c9f70fa0279c9b7b8b4aed7cae9bd4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Dec 2008 15:06:01 +0100 Subject: AMD IOMMU: set cmd buffer pointers to zero manually Impact: set cmd buffer head and tail pointers to zero in case nobody else did Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c90a15e..c6cc228 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -427,6 +427,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET, &entry, sizeof(entry)); + /* set head and tail to zero manually */ + writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); + writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + iommu_feature_enable(iommu, CONTROL_CMDBUF_EN); return cmd_buf; -- cgit v1.1 From 84df81759590ad16b0024cf46b3423cca76b2e07 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Dec 2008 16:36:44 +0100 Subject: AMD IOMMU: panic if completion wait loop fails Impact: prevents data corruption after a failed completion wait loop Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a7b6dec..0a60d60 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -235,8 +235,9 @@ static int iommu_completion_wait(struct amd_iommu *iommu) status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); - if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) - printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); + if (unlikely(i == EXIT_LOOP_COUNT)) + panic("AMD IOMMU: Completion wait loop failed\n"); + out: spin_unlock_irqrestore(&iommu->lock, flags); -- cgit v1.1 From 69c30e1e7492192f882a3fc11888b320fde5206a Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 17 Dec 2008 15:44:58 -0800 Subject: irda: Add irda_skb_cb qdisc related padding We need to pad irda_skb_cb in order to keep it safe accross dev_queue_xmit() calls. This is some ugly and temporary hack triggered by recent qisc code changes. Even though it fixes bugzilla.kernel.org bug #11795, it will be replaced by a proper fix before 2.6.29 is released. Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- include/net/irda/irda_device.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h index 3025ae1..94c852d 100644 --- a/include/net/irda/irda_device.h +++ b/include/net/irda/irda_device.h @@ -135,9 +135,11 @@ struct dongle_reg { /* * Per-packet information we need to hide inside sk_buff - * (must not exceed 48 bytes, check with struct sk_buff) + * (must not exceed 48 bytes, check with struct sk_buff) + * The default_qdisc_pad field is a temporary hack. */ struct irda_skb_cb { + unsigned int default_qdisc_pad; magic_t magic; /* Be sure that we can trust the information */ __u32 next_speed; /* The Speed to be set *after* this frame */ __u16 mtt; /* Minimum turn around time */ -- cgit v1.1 From 3e3d0e9246d0eccc1da800348fc1b9199ae3d768 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 17 Dec 2008 16:07:47 -0800 Subject: PCI hotplug: ibmphp: Fix module ref count underflow I happened to notice that the ibmphp hotplug driver does something rather silly in its init routine. It purposely calls module_put so as to underflow its module ref count to avoid being removed from the kernel. This is bad practice, and wrong, since it provides a window for subsequent module_gets to reset the refcount to zero, allowing an unload to race in and cause all sorts of mysterious panics. If the module is unsafe to load, simply omitting the module_exit parameter is sufficient to prevent the kernel from allowing the unload. Acked-by: Greg Kroah-Hartman Signed-off-by: Neil Horman Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/ibmphp_core.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index c892daa..633e743 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void) goto error; } - /* lock ourselves into memory with a module - * count of -1 so that no one can unload us. */ - module_put(THIS_MODULE); - exit: return rc; @@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void) } module_init(ibmphp_init); -module_exit(ibmphp_exit); -- cgit v1.1 From 3298a7388c00227e736d1037328788073c80c7b4 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 17 Dec 2008 19:06:08 -0800 Subject: bnx2: Fix bug in bnx2_free_rx_mem(). DMA memory for the jumbo rx page rings was freed incorrectly using the wrong local variable as the array index. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a1a3d0e..9e8222f 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp) for (j = 0; j < bp->rx_max_pg_ring; j++) { if (rxr->rx_pg_desc_ring[j]) pci_free_consistent(bp->pdev, RXBD_RING_SIZE, - rxr->rx_pg_desc_ring[i], - rxr->rx_pg_desc_mapping[i]); - rxr->rx_pg_desc_ring[i] = NULL; + rxr->rx_pg_desc_ring[j], + rxr->rx_pg_desc_mapping[j]); + rxr->rx_pg_desc_ring[j] = NULL; } if (rxr->rx_pg_ring) vfree(rxr->rx_pg_ring); -- cgit v1.1 From e28d83223a1e5672174dcdc6b73c1be3fa3de877 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Dec 2008 13:48:29 +0100 Subject: ALSA: hda - Fix silent HP output on D975 Some desktops seems to have no HP/mic jack detection on the front panel, which results in the silent output in the recent driver, because the driver mutes the output (to save power) when no plug is detected. This patch adds a new model that disables the jack-detection. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_sigmatel.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3cd2ad9..a57cd54 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC9227/9228/9229/927x ref Reference board + ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF dell-3stack Dell Dimension E520 diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5dd3e89..d6fa401 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -127,6 +127,7 @@ enum { }; enum { + STAC_D965_REF_NO_JD, /* no jack-detection */ STAC_D965_REF, STAC_D965_3ST, STAC_D965_5ST, @@ -2027,6 +2028,7 @@ static unsigned int dell_3st_pin_configs[14] = { }; static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = ref927x_pin_configs, [STAC_D965_REF] = ref927x_pin_configs, [STAC_D965_3ST] = d965_3st_pin_configs, [STAC_D965_5ST] = d965_5st_pin_configs, @@ -2035,6 +2037,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { }; static const char *stac927x_models[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = "ref-no-jd", [STAC_D965_REF] = "ref", [STAC_D965_3ST] = "3stack", [STAC_D965_5ST] = "5stack", @@ -4899,6 +4902,10 @@ static int patch_stac927x(struct hda_codec *codec) */ codec->bus->needs_damn_long_delay = 1; + /* no jack detecion for ref-no-jd model */ + if (spec->board_config == STAC_D965_REF_NO_JD) + spec->hp_detect = 0; + return 0; } -- cgit v1.1 From 55aab5f49e384a361668d112eefdb33e90779af9 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 17 Dec 2008 12:52:34 -0700 Subject: x86 gart: don't complain if no AMD GART found Impact: remove annoying bootup printk It's perfectly normal for no AMD GART to be present, e.g., if you have Intel CPUs. None of the other iommu_init() functions makes noise when it finds nothing. Signed-off-by: Bjorn Helgaas Acked-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-gart_64.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index ba7ad83..a35eaa3 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -745,10 +745,8 @@ void __init gart_iommu_init(void) unsigned long scratch; long i; - if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) { - printk(KERN_INFO "PCI-GART: No AMD GART found.\n"); + if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) return; - } #ifndef CONFIG_AGP_AMD64 no_agp = 1; -- cgit v1.1 From de13d28e0cb4923600e618641063b3c54961a474 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 18 Dec 2008 16:13:24 +0100 Subject: ATSTK1006: Fix boot from NAND flash Enable JFFS2 write buffer support so that the kernel can access a root filesystem in NAND flash. Signed-off-by: Haavard Skinnemoen --- arch/avr32/configs/atstk1006_defconfig | 134 ++++++++++++++++++++++++--------- 1 file changed, 97 insertions(+), 37 deletions(-) diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 8b6e54c..6c45a3b 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 15:40:26 2008 +# Linux kernel version: 2.6.28-rc8 +# Thu Dec 18 11:22:23 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -67,6 +67,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -77,15 +78,8 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,6 +112,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type and features @@ -134,6 +129,8 @@ CONFIG_CPU_AT32AP700X=y CONFIG_CPU_AT32AP7000=y CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATNGW100 is not set +# CONFIG_BOARD_FAVR_32 is not set +# CONFIG_BOARD_MIMC200 is not set # CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1004 is not set @@ -171,14 +168,14 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_OWNERSHIP_TRACE is not set CONFIG_NMI_DEBUGGING=y # CONFIG_HZ_100 is not set @@ -186,7 +183,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_CMDLINE="" # @@ -228,6 +225,8 @@ CONFIG_CPU_FREQ_AT32AP=y # Executable file formats # CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -299,6 +298,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -321,14 +321,8 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +353,7 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_HAVE_MTD_OTP=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -407,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # Self-contained MTD device drivers # CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +CONFIG_MTD_DATAFLASH_OTP=y CONFIG_MTD_M25P80=m CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set @@ -464,9 +461,10 @@ CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_TCB_CLKSRC=y CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set CONFIG_ATMEL_SSC=m # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set # # SCSI device support @@ -548,6 +546,9 @@ CONFIG_MACB=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -653,6 +654,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # @@ -717,6 +719,10 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -745,11 +751,11 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_AT32AP700X_WDT=y +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -758,6 +764,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -783,6 +793,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -804,10 +815,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set @@ -818,6 +832,7 @@ CONFIG_LCD_LTV350QV=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -848,28 +863,32 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m @@ -887,7 +906,7 @@ CONFIG_MMC=y # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -895,10 +914,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_ATMELMCI=y +# CONFIG_MMC_ATMELMCI_DMA is not set CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -918,6 +938,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y @@ -950,25 +971,31 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -989,6 +1016,8 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set CONFIG_DMATEST=m # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -998,12 +1027,17 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4DEV_COMPAT=y +# CONFIG_EXT4_FS_XATTR is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1036,6 +1070,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1054,7 +1089,8 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_WRITEBUFFER is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set @@ -1088,6 +1124,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1185,10 +1222,21 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1196,17 +1244,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1257,7 +1314,7 @@ CONFIG_CRYPTO_SHA1=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1278,14 +1335,17 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=m -- cgit v1.1 From 8983fdb50878ae6fa2ced336ef6072f8d5d502e3 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 18 Dec 2008 16:20:47 +0100 Subject: avr32: favr-32 build fix The favr-32 board code still refers to the old asm/arch header files which were moved to mach/ some time ago. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/favr-32/flash.c | 2 +- arch/avr32/boards/favr-32/setup.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c index 5f139b7..604bbd5 100644 --- a/arch/avr32/boards/favr-32/flash.c +++ b/arch/avr32/boards/favr-32/flash.c @@ -13,7 +13,7 @@ #include #include -#include +#include static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 7538f3d..1ee4faf 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -25,10 +25,10 @@ #include -#include -#include -#include -#include +#include +#include +#include +#include /* Oscillator frequencies. These are board-specific */ unsigned long at32_board_osc_rates[3] = { -- cgit v1.1 From 52af894cc35be34c6430d5411cd9033bd4dbbc51 Mon Sep 17 00:00:00 2001 From: John McCutchan Date: Wed, 17 Dec 2008 17:43:02 -0800 Subject: Maintainer email fixes for inotify Update John McCutchan and Robert Love's email addresses for maintenance of inotify Signed-off-by: John McCutchan Acked-by: Robert Love Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 09ed704..c42a567 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2191,9 +2191,9 @@ S: Supported INOTIFY P: John McCutchan -M: ttb@tentacle.dhs.org +M: john@johnmccutchan.com P: Robert Love -M: rml@novell.com +M: rlove@rlove.org L: linux-kernel@vger.kernel.org S: Maintained -- cgit v1.1 From 929096fe9ff1f4b3645cf3919527ab47e8d5e17c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 18 Dec 2008 17:20:13 -0800 Subject: Linux 2.6.28-rc9 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6c2f51b..4c8d797 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Erotic Pickled Herring # *DOCUMENTATION* -- cgit v1.1 From 1b08534e562dae7b084326f8aa8cc12a4c1b6593 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 18 Dec 2008 19:35:10 -0800 Subject: net: Fix module refcount leak in kernel_accept() The kernel_accept() does not hold the module refcount of newsock->ops->owner, so we need __module_get(newsock->ops->owner) code after call kernel_accept() by hand. In sunrpc, the module refcount is missing to hold. So this cause kernel panic. Used following script to reproduct: while [ 1 ]; do mount -t nfs4 192.168.0.19:/ /mnt touch /mnt/file umount /mnt lsmod | grep ipv6 done This patch fixed the problem by add __module_get(newsock->ops->owner) to kernel_accept(). So we do not need to used __module_get(newsock->ops->owner) in every place when used kernel_accept(). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/core.c | 2 -- net/socket.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index ba537fa..ce68e04 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1786,8 +1786,6 @@ static inline void rfcomm_accept_connection(struct rfcomm_session *s) if (err < 0) return; - __module_get(nsock->ops->owner); - /* Set our callbacks */ nsock->sk->sk_data_ready = rfcomm_l2data_ready; nsock->sk->sk_state_change = rfcomm_l2state_change; diff --git a/net/socket.c b/net/socket.c index 92764d8..76ba80a 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2307,6 +2307,7 @@ int kernel_accept(struct socket *sock, struct socket **newsock, int flags) } (*newsock)->ops = sock->ops; + __module_get((*newsock)->ops->owner); done: return err; -- cgit v1.1 From 739840d529eb7505d3cbfe9d468bf1440c9a8e27 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 17 Dec 2008 12:02:16 +0000 Subject: ppp: fix segfaults introduced by netdev_priv changes This patch fixes a segfault in ppp_shutdown_interface() and ppp_destroy_interface() when a PPP connection is closed. I bisected the problem to the following commit: commit c8019bf3aff653cceb64f66489fc299ee5957b57 Author: Wang Chen Date: Thu Nov 20 04:24:17 2008 -0800 netdevice ppp: Convert directly reference of netdev->priv 1. Use netdev_priv(dev) to replace dev->priv. 2. Alloc netdev's private data by alloc_netdev(). Signed-off-by: Wang Chen Signed-off-by: David S. Miller The original ppp_generic code treated the netdev and struct ppp as independent data structures which were freed separately. In moving the ppp struct into the netdev, it is now possible for the private data to be freed before the call to ppp_shutdown_interface(), which is bad. The kfree(ppp) in ppp_destroy_interface() is also wrong; presumably ppp hasn't worked since the above commit. The following patch fixes both problems. Signed-off-by: James Chapman Reviewed-by: Wang Chen Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 7e857e9..714a230 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -116,6 +116,7 @@ struct ppp { unsigned long last_xmit; /* jiffies when last pkt sent 9c */ unsigned long last_recv; /* jiffies when last pkt rcvd a0 */ struct net_device *dev; /* network interface device a4 */ + int closing; /* is device closing down? a8 */ #ifdef CONFIG_PPP_MULTILINK int nxchan; /* next channel to send something on */ u32 nxseq; /* next sequence number to send */ @@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp) struct sk_buff *skb; ppp_xmit_lock(ppp); - if (ppp->dev) { + if (!ppp->closing) { ppp_push(ppp); while (!ppp->xmit_pending && (skb = skb_dequeue(&ppp->file.xq))) @@ -1463,8 +1464,7 @@ static inline void ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { ppp_recv_lock(ppp); - /* ppp->dev == 0 means interface is closing down */ - if (ppp->dev) + if (!ppp->closing) ppp_receive_frame(ppp, skb, pch); else kfree_skb(skb); @@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind) */ static void ppp_shutdown_interface(struct ppp *ppp) { - struct net_device *dev; - mutex_lock(&all_ppp_mutex); - ppp_lock(ppp); - dev = ppp->dev; - ppp->dev = NULL; - ppp_unlock(ppp); /* This will call dev_close() for us. */ - if (dev) { - unregister_netdev(dev); - free_netdev(dev); - } + ppp_lock(ppp); + if (!ppp->closing) { + ppp->closing = 1; + ppp_unlock(ppp); + unregister_netdev(ppp->dev); + } else + ppp_unlock(ppp); + cardmap_set(&all_ppp_units, ppp->file.index, NULL); ppp->file.dead = 1; ppp->owner = NULL; @@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp) if (ppp->xmit_pending) kfree_skb(ppp->xmit_pending); - kfree(ppp); + free_netdev(ppp->dev); } /* @@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit) if (pch->file.hdrlen > ppp->file.hdrlen) ppp->file.hdrlen = pch->file.hdrlen; hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */ - if (ppp->dev && hdrlen > ppp->dev->hard_header_len) + if (hdrlen > ppp->dev->hard_header_len) ppp->dev->hard_header_len = hdrlen; list_add_tail(&pch->clist, &ppp->channels); ++ppp->n_channels; -- cgit v1.1 From a2ed9615e3222645007fc19991aedf30eed3ecfd Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 19 Dec 2008 16:25:01 +1100 Subject: md: Don't read past end of bitmap when reading bitmap. When we read the write-intent-bitmap off the device, we currently read a whole number of pages. When PAGE_SIZE is 4K, this works due to the alignment we enforce on the superblock and bitmap. When PAGE_SIZE is 64K, this case read past the end-of-device which causes an error. When we write the superblock, we ensure to clip the last page to just be the required size. Copy that code into the read path to just read the required number of sectors. Signed-off-by: Neil Brown Cc: stable@kernel.org --- drivers/md/bitmap.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ac89a5d..ab7c8e4 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) */ /* IO operations when bitmap is stored near all superblocks */ -static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index) +static struct page *read_sb_page(mddev_t *mddev, long offset, + struct page *page, + unsigned long index, int size) { /* choose a good rdev and read the page from there */ mdk_rdev_t *rdev; struct list_head *tmp; - struct page *page = alloc_page(GFP_KERNEL); sector_t target; if (!page) + page = alloc_page(GFP_KERNEL); + if (!page) return ERR_PTR(-ENOMEM); rdev_for_each(rdev, tmp, mddev) { @@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde target = rdev->sb_start + offset + index * (PAGE_SIZE/512); - if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) { + if (sync_page_io(rdev->bdev, target, + roundup(size, bdev_hardsect_size(rdev->bdev)), + page, READ)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will * quietly no-op */ @@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap) bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes); } else { - bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0); + bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + 0, sizeof(bitmap_super_t)); } if (IS_ERR(bitmap->sb_page)) { err = PTR_ERR(bitmap->sb_page); @@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) */ page = bitmap->sb_page; offset = sizeof(bitmap_super_t); + read_sb_page(bitmap->mddev, bitmap->offset, + page, + index, count); } else if (file) { page = read_page(file, index, bitmap, count); offset = 0; } else { - page = read_sb_page(bitmap->mddev, bitmap->offset, index); + page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + index, count); offset = 0; } if (IS_ERR(page)) { /* read error */ -- cgit v1.1 From c4de0a5d671e3af38dc3496538e391782aecc3a5 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Sun, 14 Dec 2008 19:05:04 -0800 Subject: drm/i915: Don't return busy for buffers left on the flushing list. These buffers don't have active rendering still occurring to them, they just need either a flush to be emitted or a retire_requests to occur so that we notice they're done. Return unbusy so that one of the two occurs. The two expected consumers of this interface (OpenGL and libdrm_intel BO cache) both want this behavior. Signed-off-by: Eric Anholt Acked-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ad672d8..24fe8c1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, } obj_priv = obj->driver_private; - args->busy = obj_priv->active; + /* Don't count being on the flushing list against the object being + * done. Otherwise, a buffer left on the flushing list but not getting + * flushed (because nobody's flushing that domain) won't ever return + * unbusy and get reused by libdrm's bo cache. The other expected + * consumer of this interface, OpenGL's occlusion queries, also specs + * that the objects get unbusy "eventually" without any interference. + */ + args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); -- cgit v1.1 From ac5c4e76180a74c7f922f6fa71ace0cef45fa433 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 19 Dec 2008 15:38:34 +1000 Subject: drm/i915: GEM on PAE has problems - disable it for now. On PAE systems, GEM allocates pages using shmem, and passes these pages to be bound into AGP, however the AGP interfaces + the x86 set_memory interfaces all take unsigned long not dma_addr_t. The initial fix for this was a mess, so we need to do this correctly for 2.6.29. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 10 +++++++++- drivers/gpu/drm/i915/i915_drv.h | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 553dd4b..afa8a12 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data, value = dev->pci_device; break; case I915_PARAM_HAS_GEM: - value = 1; + value = dev_priv->has_gem; break; default: DRM_ERROR("Unknown parameter %d\n", param->param); @@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->regs = ioremap(base, size); +#ifdef CONFIG_HIGHMEM64G + /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ + dev_priv->has_gem = 0; +#else + /* enable GEM by default */ + dev_priv->has_gem = 1; +#endif + i915_gem_load(dev); /* Init HWS */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index adc972cc..b3cc473 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -106,6 +106,8 @@ struct intel_opregion { typedef struct drm_i915_private { struct drm_device *dev; + int has_gem; + void __iomem *regs; drm_local_map_t *sarea; -- cgit v1.1 From fa620e97feae731f3d461baaac4da0b127b6fd8e Mon Sep 17 00:00:00 2001 From: Joerg Schirottke Date: Fri, 19 Dec 2008 08:13:49 +0100 Subject: ALSA: hda - Add quirk for Dell Studio 17 Added the matching model=dell-m6 for Dell Studio 17 laptop. Signed-off-by: Joerg Schirottke Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d6fa401..0bb3cae 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1641,6 +1641,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "unknown Dell", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f, "Dell Studio 1537", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0, + "Dell Studio 17", STAC_DELL_M6_DMIC), {} /* terminator */ }; -- cgit v1.1 From d8a0be6ab7ba1ffa43e7ea0dcdde3e8b68d4f762 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 18 Dec 2008 14:55:11 +0100 Subject: cciss: fix problem that deleting multiple logical drives could cause a panic Fix problem that deleting multiple logical drives could cause a panic. It fixes a panic which can be easily reproduced in the following way: Just create several "arrays," each with multiple logical drives via hpacucli, then delete the first array, and it will blow up in deregister_disk(), in the call to get_host() when it tries to dig the hba pointer out of a NULL queue pointer. The problem has been present since my code to make rebuild_lun_table behave better went in. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9364dc5..9f7c543 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; + + /* skip holes in the array from already deleted drives */ + if (h->drv[i].raid_level == -1) + continue; + for (j = 0; j < num_luns; j++) { memcpy(&lunid, &ld_buff->LUN[j][0], 4); lunid = le32_to_cpu(lunid); -- cgit v1.1 From 85f13b673f6a59d29529b2a60b88306c68e7b56c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 08:20:38 +0100 Subject: ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" This reverts commit 07f455f779acfb3eba4921fd1399761559b10fa9. ALSA: hda: removed unneeded hp_nid references Removed unneeded hp_nid references for 92hd73xx codec family. This caused the silent output on some Intel desktops due to missing routing of widget 0x0a and 0x0d. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0bb3cae..5fcaae6 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4259,14 +4259,17 @@ again: switch (spec->multiout.num_dacs) { case 0x3: /* 6 Channel */ + spec->multiout.hp_nid = 0x17; spec->mixer = stac92hd73xx_6ch_mixer; spec->init = stac92hd73xx_6ch_core_init; break; case 0x4: /* 8 Channel */ + spec->multiout.hp_nid = 0x18; spec->mixer = stac92hd73xx_8ch_mixer; spec->init = stac92hd73xx_8ch_core_init; break; case 0x5: /* 10 Channel */ + spec->multiout.hp_nid = 0x19; spec->mixer = stac92hd73xx_10ch_mixer; spec->init = stac92hd73xx_10ch_core_init; }; -- cgit v1.1 From 9e43f0de690211cf7153b5f3ec251bc315647ada Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Dec 2008 14:51:01 +0100 Subject: ALSA: hda - Add no-jd model for IDT 92HD73xx Added the model without the jack-detection for some desktops that have really no jack-detection. The recent driver caused regressions regarding the sound output on such machines. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_sigmatel.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a57cd54..394d7d3 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1077,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC92HD73* ref Reference board + no-jd BIOS setup but without jack-detection dell-m6-amic Dell desktops/laptops with analog mics dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5fcaae6..d7c622f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -69,6 +69,7 @@ enum { }; enum { + STAC_92HD73XX_NO_JD, /* no jack-detection */ STAC_92HD73XX_REF, STAC_DELL_M6_AMIC, STAC_DELL_M6_DMIC, @@ -1612,6 +1613,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_NO_JD] = "no-jd", [STAC_92HD73XX_REF] = "ref", [STAC_DELL_M6_AMIC] = "dell-m6-amic", [STAC_DELL_M6_DMIC] = "dell-m6-dmic", @@ -4359,6 +4361,9 @@ again: return err; } + if (spec->board_config == STAC_92HD73XX_NO_JD) + spec->hp_detect = 0; + codec->patch_ops = stac92xx_patch_ops; return 0; -- cgit v1.1 From e76f42761197dd6e9405e2eeb35932acfede115a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 17:30:13 -0600 Subject: ACPI: fix 2.6.28 acpi.debug_level regression acpi_early_init() was changed to over-write the cmdline param, making it really inconvenient to set debug flags at boot-time. Also, This sets the default level to "info", which is what all the ACPI drivers use. So to enable messages from drivers, you only have to supply the "layer" (a.k.a. "component"). For non-"info" ACPI core and ACPI interpreter messages, you have to supply both level and layer masks, as before. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 11 +++++++---- drivers/acpi/bus.c | 8 -------- drivers/acpi/utilities/utglobal.c | 2 +- include/acpi/acoutput.h | 2 +- 4 files changed, 9 insertions(+), 14 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e0f346d..c9115c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file Bits in debug_level correspond to a level in ACPI_DEBUG_PRINT statements, e.g., ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... - See Documentation/acpi/debug.txt for more information - about debug layers and levels. + The debug_level mask defaults to "info". See + Documentation/acpi/debug.txt for more information about + debug layers and levels. + Enable processor driver info messages: + acpi.debug_layer=0x20000000 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 Enable AML "Debug" output, i.e., stores to the Debug object while interpreting AML: acpi.debug_layer=0xffffffff acpi.debug_level=0x2 - Enable PCI/PCI interrupt routing info messages: - acpi.debug_layer=0x400000 acpi.debug_level=0x4 Enable all messages related to ACPI hardware: acpi.debug_layer=0x2 acpi.debug_level=0xffffffff diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7edf6d9..765fd1c 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,14 +688,6 @@ void __init acpi_early_init(void) if (acpi_disabled) return; - /* - * ACPI CA initializes acpi_dbg_level to non-zero, which means - * we get debug output merely by turning on CONFIG_ACPI_DEBUG. - * Turn it off so we don't get output unless the user specifies - * acpi.debug_level. - */ - acpi_dbg_level = 0; - printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c index 670551b..17ed5ac 100644 --- a/drivers/acpi/utilities/utglobal.c +++ b/drivers/acpi/utilities/utglobal.c @@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT; /* Debug switch - layer (component) mask */ -u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS; +u32 acpi_dbg_layer = 0; u32 acpi_gbl_nesting_level = 0; /* Debugger globals */ diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 09d33c7..db8852d 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -172,7 +172,7 @@ /* Defaults for debug_level, debug and normal */ -#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) +#define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO) #define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) #define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL) -- cgit v1.1 From abe1dfab60e1839d115930286cb421f5a5b193f3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 26 Nov 2008 14:35:22 +0800 Subject: ACPI: don't cond_resched() when irqs_disabled() The ACPI interpreter usually runs with irqs enabled. However, during suspend/resume it runs with irqs disabled to evaluate _GTS/_BFS, as well as by irqrouter_resume() which evaluates _CRS, _PRS, _SRS. http://bugzilla.kernel.org/show_bug.cgi?id=12252 Signed-off-by: Wu Fengguang Signed-off-by: Len Brown --- include/acpi/platform/aclinux.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 029c8c0..0515e75 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -141,6 +141,10 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) /* * We need to show where it is safe to preempt execution of ACPICA */ -#define ACPI_PREEMPTION_POINT() cond_resched() +#define ACPI_PREEMPTION_POINT() \ + do { \ + if (!irqs_disabled()) \ + cond_resched(); \ + } while (0) #endif /* __ACLINUX_H__ */ -- cgit v1.1 From 8f55c1e51fbb03998708bdd97d5b6665ab92462d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 14:02:32 +0100 Subject: ALSA: hda - Remove non-working headphone control for Dell laptops The previous commit re-enabled hp_nid setup for IDT92HD73*, but it's unneeded indeed for Dell laptops that have multiple headphones. Setting the extra hp_nid results in a non-working "Headpohne" mixer control. Thus hp_nid should be 0 for these dell models. Also, the automatic addition of hp_nid should check whether it's a dual-HP model or not. For dual-HPs, the pins are already checked by the early workaround. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d7c622f..596ceab 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2903,7 +2903,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, } if ((spec->multiout.num_dacs - cfg->line_outs) > 0 && - cfg->hp_outs && !spec->multiout.hp_nid) + cfg->hp_outs == 1 && !spec->multiout.hp_nid) spec->multiout.hp_nid = nid; if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) { @@ -4307,6 +4307,7 @@ again: spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; spec->eapd_switch = 0; spec->num_amps = 1; + spec->multiout.hp_nid = 0; /* dual HPs */ if (!spec->init) spec->init = dell_m6_core_init; -- cgit v1.1 From 19b3f31609dc8be3a56c78dcb7da723f10f7009c Mon Sep 17 00:00:00 2001 From: Stanley Miao Date: Fri, 19 Dec 2008 22:08:22 +0800 Subject: ALSA: Fix a Oops bug in omap soc driver. There will be a Oops or frequent underrun messages when playing music with omap soc driver, this is because a data region is incorretly sized, other data region will be overwriten when writing to this data region. Signed-off-by: Stanley Miao Acked-by: Jarkko Nikula Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/soc/omap/omap-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index e9084fd..acd68ef 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -233,7 +233,7 @@ static int omap_pcm_open(struct snd_pcm_substream *substream) if (ret < 0) goto out; - prtd = kzalloc(sizeof(prtd), GFP_KERNEL); + prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); if (prtd == NULL) { ret = -ENOMEM; goto out; -- cgit v1.1 From 213cc060797378059a28ebc5c539f3e9a80160bd Mon Sep 17 00:00:00 2001 From: Pekka J Enberg Date: Fri, 19 Dec 2008 12:08:39 +0200 Subject: ftrace: introduce tracing_reset_online_cpus() helper Impact: cleanup This patch factors out common code from multiple tracers into a tracing_reset_online_cpus() function and converts the tracers to use it. Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 10 ++++++++++ kernel/trace/trace.h | 1 + kernel/trace/trace_boot.c | 12 +----------- kernel/trace/trace_functions.c | 14 ++------------ kernel/trace/trace_hw_branches.c | 14 ++------------ kernel/trace/trace_mmiotrace.c | 6 +----- kernel/trace/trace_sched_switch.c | 14 ++------------ kernel/trace/trace_sysprof.c | 12 +----------- 8 files changed, 20 insertions(+), 63 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0eb6d48..79db26e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -679,6 +679,16 @@ void tracing_reset(struct trace_array *tr, int cpu) ftrace_enable_cpu(); } +void tracing_reset_online_cpus(struct trace_array *tr) +{ + int cpu; + + tr->time_start = ftrace_now(tr->cpu); + + for_each_online_cpu(cpu) + tracing_reset(tr, cpu); +} + #define SAVED_CMDLINES 128 static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1]; static unsigned map_cmdline_to_pid[SAVED_CMDLINES]; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index fc75dce..cc7a4f8 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -374,6 +374,7 @@ struct trace_iterator { int tracing_is_enabled(void); void trace_wake_up(void); void tracing_reset(struct trace_array *tr, int cpu); +void tracing_reset_online_cpus(struct trace_array *tr); int tracing_open_generic(struct inode *inode, struct file *filp); struct dentry *tracing_init_dentry(void); void init_tracer_sysprof_debugfs(struct dentry *d_tracer); diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c index a4fa2c5..3ccebde 100644 --- a/kernel/trace/trace_boot.c +++ b/kernel/trace/trace_boot.c @@ -37,16 +37,6 @@ void disable_boot_trace(void) tracing_stop_sched_switch_record(); } -static void reset_boot_trace(struct trace_array *tr) -{ - int cpu; - - tr->time_start = ftrace_now(tr->cpu); - - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); -} - static int boot_trace_init(struct trace_array *tr) { int cpu; @@ -130,7 +120,7 @@ struct tracer boot_tracer __read_mostly = { .name = "initcall", .init = boot_trace_init, - .reset = reset_boot_trace, + .reset = tracing_reset_online_cpus, .print_line = initcall_print_line, }; diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index e74f6d0..9236d7e 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -16,20 +16,10 @@ #include "trace.h" -static void function_reset(struct trace_array *tr) -{ - int cpu; - - tr->time_start = ftrace_now(tr->cpu); - - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); -} - static void start_function_trace(struct trace_array *tr) { tr->cpu = get_cpu(); - function_reset(tr); + tracing_reset_online_cpus(tr); put_cpu(); tracing_start_cmdline_record(); @@ -55,7 +45,7 @@ static void function_trace_reset(struct trace_array *tr) static void function_trace_start(struct trace_array *tr) { - function_reset(tr); + tracing_reset_online_cpus(tr); } static struct tracer function_trace __read_mostly = diff --git a/kernel/trace/trace_hw_branches.c b/kernel/trace/trace_hw_branches.c index ee29e01..b6a3e20 100644 --- a/kernel/trace/trace_hw_branches.c +++ b/kernel/trace/trace_hw_branches.c @@ -25,16 +25,6 @@ static DEFINE_PER_CPU(unsigned char[SIZEOF_BTS], buffer); #define this_buffer per_cpu(buffer, smp_processor_id()) -static void bts_trace_reset(struct trace_array *tr) -{ - int cpu; - - tr->time_start = ftrace_now(tr->cpu); - - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); -} - static void bts_trace_start_cpu(void *arg) { if (this_tracer) @@ -54,7 +44,7 @@ static void bts_trace_start(struct trace_array *tr) { int cpu; - bts_trace_reset(tr); + tracing_reset_online_cpus(tr); for_each_cpu_mask(cpu, cpu_possible_map) smp_call_function_single(cpu, bts_trace_start_cpu, NULL, 1); @@ -78,7 +68,7 @@ static void bts_trace_stop(struct trace_array *tr) static int bts_trace_init(struct trace_array *tr) { - bts_trace_reset(tr); + tracing_reset_online_cpus(tr); bts_trace_start(tr); return 0; diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 2fb6da6..fffcb06 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -22,14 +22,10 @@ static unsigned long prev_overruns; static void mmio_reset_data(struct trace_array *tr) { - int cpu; - overrun_detected = false; prev_overruns = 0; - tr->time_start = ftrace_now(tr->cpu); - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); + tracing_reset_online_cpus(tr); } static int mmio_trace_init(struct trace_array *tr) diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 781d72e..add2c1f 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -72,16 +72,6 @@ probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee) local_irq_restore(flags); } -static void sched_switch_reset(struct trace_array *tr) -{ - int cpu; - - tr->time_start = ftrace_now(tr->cpu); - - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); -} - static int tracing_sched_register(void) { int ret; @@ -197,7 +187,7 @@ void tracing_sched_switch_assign_trace(struct trace_array *tr) static void start_sched_trace(struct trace_array *tr) { - sched_switch_reset(tr); + tracing_reset_online_cpus(tr); tracing_start_sched_switch_record(); } @@ -221,7 +211,7 @@ static void sched_switch_trace_reset(struct trace_array *tr) static void sched_switch_trace_start(struct trace_array *tr) { - sched_switch_reset(tr); + tracing_reset_online_cpus(tr); tracing_start_sched_switch(); } diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 54960ed..01becf1 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -234,20 +234,10 @@ static void stop_stack_timers(void) stop_stack_timer(cpu); } -static void stack_reset(struct trace_array *tr) -{ - int cpu; - - tr->time_start = ftrace_now(tr->cpu); - - for_each_online_cpu(cpu) - tracing_reset(tr, cpu); -} - static void start_stack_trace(struct trace_array *tr) { mutex_lock(&sample_timer_lock); - stack_reset(tr); + tracing_reset_online_cpus(tr); start_stack_timers(); tracer_enabled = 1; mutex_unlock(&sample_timer_lock); -- cgit v1.1 From 6ff232070a1088807e24f657b5d6f299f1ec32f6 Mon Sep 17 00:00:00 2001 From: Duane Griffin Date: Fri, 19 Dec 2008 16:45:21 -0600 Subject: 9p: Remove potentially bad parameter from function entry debug print. Signed-off-by: Duane Griffin Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 8314d3f4..7c735283 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -1022,7 +1022,8 @@ v9fs_vfs_put_link(struct dentry *dentry, struct nameidata *nd, void *p) { char *s = nd_get_link(nd); - P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s); + P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, + IS_ERR(s) ? "" : s); if (!IS_ERR(s)) __putname(s); } -- cgit v1.1 From 7dd0cdc51c126915e243ee3291f7b6b5ea5e5833 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 19 Dec 2008 16:47:40 -0600 Subject: 9p: convert d_iname references to d_name.name d_iname is rubbish for long file names. Use d_name.name in printks instead. Signed-off-by: Wu Fengguang Acked-by: Eric Van Hensbergen --- fs/9p/fid.c | 4 ++-- fs/9p/vfs_dentry.c | 9 ++++++--- fs/9p/vfs_inode.c | 3 ++- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/9p/fid.c b/fs/9p/fid.c index 3031e32..2a983d4 100644 --- a/fs/9p/fid.c +++ b/fs/9p/fid.c @@ -45,7 +45,7 @@ int v9fs_fid_add(struct dentry *dentry, struct p9_fid *fid) struct v9fs_dentry *dent; P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n", - fid->fid, dentry->d_iname); + fid->fid, dentry->d_name.name); dent = dentry->d_fsdata; if (!dent) { @@ -79,7 +79,7 @@ static struct p9_fid *v9fs_fid_find(struct dentry *dentry, u32 uid, int any) struct p9_fid *fid, *ret; P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n", - dentry->d_iname, dentry, uid, any); + dentry->d_name.name, dentry, uid, any); dent = (struct v9fs_dentry *) dentry->d_fsdata; ret = NULL; if (dent) { diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c index f9534f1..06dcc7c 100644 --- a/fs/9p/vfs_dentry.c +++ b/fs/9p/vfs_dentry.c @@ -52,7 +52,8 @@ static int v9fs_dentry_delete(struct dentry *dentry) { - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); return 1; } @@ -69,7 +70,8 @@ static int v9fs_dentry_delete(struct dentry *dentry) static int v9fs_cached_dentry_delete(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); if(!inode) return 1; @@ -88,7 +90,8 @@ void v9fs_dentry_release(struct dentry *dentry) struct v9fs_dentry *dent; struct p9_fid *temp, *current_fid; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); dent = dentry->d_fsdata; if (dent) { list_for_each_entry_safe(current_fid, temp, &dent->fidlist, diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 7c735283..2dfcf54 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -963,7 +963,8 @@ static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer, if (buflen > PATH_MAX) buflen = PATH_MAX; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); retval = v9fs_readlink(dentry, link, buflen); -- cgit v1.1 From f1d9e4586e79e1fc7b26d1c567599a904013f199 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 19 Dec 2008 16:50:22 -0600 Subject: fs/9p: change simple_strtol to simple_strtoul Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // Signed-off-by: Julia Lawall Acked-by: Eric Van Hensbergen --- fs/9p/v9fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 24eb010..332b5ff0 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -160,7 +160,7 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses) v9ses->flags |= V9FS_ACCESS_ANY; else { v9ses->flags |= V9FS_ACCESS_SINGLE; - v9ses->uid = simple_strtol(s, &e, 10); + v9ses->uid = simple_strtoul(s, &e, 10); if (*e != '\0') v9ses->uid = ~0; } -- cgit v1.1 From bf53de907dfdaac178c92d774aae7370d7b97d20 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Fri, 19 Dec 2008 15:10:24 +0100 Subject: x86, bts: add fork and exit handling Impact: introduce new ptrace facility Add arch_ptrace_untrace() function that is called when the tracer detaches (either voluntarily or when the tracing task dies); ptrace_disable() is only called on a voluntary detach. Add ptrace_fork() and arch_ptrace_fork(). They are called when a traced task is forked. Clear DS and BTS related fields on fork. Release DS resources and reclaim memory in ptrace_untrace(). This releases resources already when the tracing task dies. We used to do that when the traced task dies. Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ds.h | 9 ++++++++ arch/x86/include/asm/ptrace.h | 7 ++++++ arch/x86/kernel/ds.c | 11 ++++++++++ arch/x86/kernel/process_32.c | 20 ++++++++--------- arch/x86/kernel/process_64.c | 20 ++++++++--------- arch/x86/kernel/ptrace.c | 50 ++++++++++++++++++++++++++++++++++--------- include/linux/ptrace.h | 22 +++++++++++++++++++ kernel/fork.c | 2 ++ kernel/ptrace.c | 12 +++++++++++ 9 files changed, 121 insertions(+), 32 deletions(-) diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h index ee0ea3a..a8f672b 100644 --- a/arch/x86/include/asm/ds.h +++ b/arch/x86/include/asm/ds.h @@ -252,12 +252,21 @@ extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *); */ extern void ds_switch_to(struct task_struct *prev, struct task_struct *next); +/* + * Task clone/init and cleanup work + */ +extern void ds_copy_thread(struct task_struct *tsk, struct task_struct *father); +extern void ds_exit_thread(struct task_struct *tsk); + #else /* CONFIG_X86_DS */ struct cpuinfo_x86; static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {} static inline void ds_switch_to(struct task_struct *prev, struct task_struct *next) {} +static inline void ds_copy_thread(struct task_struct *tsk, + struct task_struct *father) {} +static inline void ds_exit_thread(struct task_struct *tsk) {} #endif /* CONFIG_X86_DS */ #endif /* _ASM_X86_DS_H */ diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index fbf7442..6d34d95 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -235,6 +235,13 @@ extern int do_get_thread_area(struct task_struct *p, int idx, extern int do_set_thread_area(struct task_struct *p, int idx, struct user_desc __user *info, int can_allocate); +extern void x86_ptrace_untrace(struct task_struct *); +extern void x86_ptrace_fork(struct task_struct *child, + unsigned long clone_flags); + +#define arch_ptrace_untrace(tsk) x86_ptrace_untrace(tsk) +#define arch_ptrace_fork(child, flags) x86_ptrace_fork(child, flags) + #endif /* __KERNEL__ */ #endif /* !__ASSEMBLY__ */ diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 98d271e..da91701 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -1017,3 +1017,14 @@ void ds_switch_to(struct task_struct *prev, struct task_struct *next) update_debugctlmsr(next->thread.debugctlmsr); } + +void ds_copy_thread(struct task_struct *tsk, struct task_struct *father) +{ + clear_tsk_thread_flag(tsk, TIF_DS_AREA_MSR); + tsk->thread.ds_ctx = NULL; +} + +void ds_exit_thread(struct task_struct *tsk) +{ + WARN_ON(tsk->thread.ds_ctx); +} diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 605eff9..3ba155d 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -60,6 +60,7 @@ #include #include #include +#include asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); @@ -251,17 +252,8 @@ void exit_thread(void) tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; put_cpu(); } -#ifdef CONFIG_X86_DS - /* Free any BTS tracers that have not been properly released. */ - if (unlikely(current->bts)) { - ds_release_bts(current->bts); - current->bts = NULL; - - kfree(current->bts_buffer); - current->bts_buffer = NULL; - current->bts_size = 0; - } -#endif /* CONFIG_X86_DS */ + + ds_exit_thread(current); } void flush_thread(void) @@ -343,6 +335,12 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, kfree(p->thread.io_bitmap_ptr); p->thread.io_bitmap_max = 0; } + + ds_copy_thread(p, current); + + clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR); + p->thread.debugctlmsr = 0; + return err; } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 1cfd2a4..416fb92 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -53,6 +53,7 @@ #include #include #include +#include asmlinkage extern void ret_from_fork(void); @@ -236,17 +237,8 @@ void exit_thread(void) t->io_bitmap_max = 0; put_cpu(); } -#ifdef CONFIG_X86_DS - /* Free any BTS tracers that have not been properly released. */ - if (unlikely(current->bts)) { - ds_release_bts(current->bts); - current->bts = NULL; - - kfree(current->bts_buffer); - current->bts_buffer = NULL; - current->bts_size = 0; - } -#endif /* CONFIG_X86_DS */ + + ds_exit_thread(current); } void flush_thread(void) @@ -376,6 +368,12 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, if (err) goto out; } + + ds_copy_thread(p, me); + + clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR); + p->thread.debugctlmsr = 0; + err = 0; out: if (err && p->thread.io_bitmap_ptr) { diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 45e9855..6ad2bb6 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -769,8 +769,47 @@ static int ptrace_bts_size(struct task_struct *child) return (trace->ds.top - trace->ds.begin) / trace->ds.size; } + +static void ptrace_bts_fork(struct task_struct *tsk) +{ + tsk->bts = NULL; + tsk->bts_buffer = NULL; + tsk->bts_size = 0; + tsk->thread.bts_ovfl_signal = 0; +} + +static void ptrace_bts_untrace(struct task_struct *child) +{ + if (unlikely(child->bts)) { + ds_release_bts(child->bts); + child->bts = NULL; + + kfree(child->bts_buffer); + child->bts_buffer = NULL; + child->bts_size = 0; + } +} + +static void ptrace_bts_detach(struct task_struct *child) +{ + ptrace_bts_untrace(child); +} +#else +static inline void ptrace_bts_fork(struct task_struct *tsk) {} +static inline void ptrace_bts_detach(struct task_struct *child) {} +static inline void ptrace_bts_untrace(struct task_struct *child) {} #endif /* CONFIG_X86_PTRACE_BTS */ +void x86_ptrace_fork(struct task_struct *child, unsigned long clone_flags) +{ + ptrace_bts_fork(child); +} + +void x86_ptrace_untrace(struct task_struct *child) +{ + ptrace_bts_untrace(child); +} + /* * Called by kernel/ptrace.c when detaching.. * @@ -782,16 +821,7 @@ void ptrace_disable(struct task_struct *child) #ifdef TIF_SYSCALL_EMU clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); #endif -#ifdef CONFIG_X86_PTRACE_BTS - if (child->bts) { - ds_release_bts(child->bts); - child->bts = NULL; - - kfree(child->bts_buffer); - child->bts_buffer = NULL; - child->bts_size = 0; - } -#endif /* CONFIG_X86_PTRACE_BTS */ + ptrace_bts_detach(child); } #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 22641d5..98b93ca 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -94,6 +94,7 @@ extern void ptrace_notify(int exit_code); extern void __ptrace_link(struct task_struct *child, struct task_struct *new_parent); extern void __ptrace_unlink(struct task_struct *child); +extern void ptrace_fork(struct task_struct *task, unsigned long clone_flags); #define PTRACE_MODE_READ 1 #define PTRACE_MODE_ATTACH 2 /* Returns 0 on success, -errno on denial. */ @@ -313,6 +314,27 @@ static inline void user_enable_block_step(struct task_struct *task) #define arch_ptrace_stop(code, info) do { } while (0) #endif +#ifndef arch_ptrace_untrace +/* + * Do machine-specific work before untracing child. + * + * This is called for a normal detach as well as from ptrace_exit() + * when the tracing task dies. + * + * Called with write_lock(&tasklist_lock) held. + */ +#define arch_ptrace_untrace(task) do { } while (0) +#endif + +#ifndef arch_ptrace_fork +/* + * Do machine-specific work to initialize a new task. + * + * This is called from copy_process(). + */ +#define arch_ptrace_fork(child, clone_flags) do { } while (0) +#endif + extern int task_current_syscall(struct task_struct *target, long *callno, unsigned long args[6], unsigned int maxargs, unsigned long *sp, unsigned long *pc); diff --git a/kernel/fork.c b/kernel/fork.c index 7b93da7..65ce60a 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1096,6 +1096,8 @@ static struct task_struct *copy_process(unsigned long clone_flags, #ifdef CONFIG_DEBUG_MUTEXES p->blocked_on = NULL; /* not blocked yet */ #endif + if (unlikely(ptrace_reparented(current))) + ptrace_fork(p, clone_flags); /* Perform scheduler related setup. Assign this task to a CPU. */ sched_fork(p, clone_flags); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 4c8bcd7..100a71c 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -25,6 +25,17 @@ #include #include + +/* + * Initialize a new task whose father had been ptraced. + * + * Called from copy_process(). + */ +void ptrace_fork(struct task_struct *child, unsigned long clone_flags) +{ + arch_ptrace_fork(child, clone_flags); +} + /* * ptrace a task: make the debugger its new parent and * move it to the ptrace list. @@ -72,6 +83,7 @@ void __ptrace_unlink(struct task_struct *child) child->parent = child->real_parent; list_del_init(&child->ptrace_entry); + arch_ptrace_untrace(child); if (task_is_traced(child)) ptrace_untrace(child); } -- cgit v1.1 From c5dee6177f4bd2095aab7d9be9f6ebdddd6deee9 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Fri, 19 Dec 2008 15:17:02 +0100 Subject: x86, bts: memory accounting Impact: move the BTS buffer accounting to the mlock bucket Add alloc_locked_buffer() and free_locked_buffer() functions to mm/mlock.c to kalloc a buffer and account the locked memory to current. Account the memory for the BTS buffer to the tracer. Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/ptrace.c | 45 ++++++++++++++++++++++++++++++++++----------- include/linux/mm.h | 2 ++ mm/mlock.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 6ad2bb6..0a5df5f 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -650,6 +650,24 @@ static int ptrace_bts_drain(struct task_struct *child, return drained; } +static int ptrace_bts_allocate_buffer(struct task_struct *child, size_t size) +{ + child->bts_buffer = alloc_locked_buffer(size); + if (!child->bts_buffer) + return -ENOMEM; + + child->bts_size = size; + + return 0; +} + +static void ptrace_bts_free_buffer(struct task_struct *child) +{ + free_locked_buffer(child->bts_buffer, child->bts_size); + child->bts_buffer = NULL; + child->bts_size = 0; +} + static int ptrace_bts_config(struct task_struct *child, long cfg_size, const struct ptrace_bts_config __user *ucfg) @@ -679,14 +697,13 @@ static int ptrace_bts_config(struct task_struct *child, if ((cfg.flags & PTRACE_BTS_O_ALLOC) && (cfg.size != child->bts_size)) { - kfree(child->bts_buffer); + int error; - child->bts_size = cfg.size; - child->bts_buffer = kzalloc(cfg.size, GFP_KERNEL); - if (!child->bts_buffer) { - child->bts_size = 0; - return -ENOMEM; - } + ptrace_bts_free_buffer(child); + + error = ptrace_bts_allocate_buffer(child, cfg.size); + if (error < 0) + return error; } if (cfg.flags & PTRACE_BTS_O_TRACE) @@ -701,10 +718,8 @@ static int ptrace_bts_config(struct task_struct *child, if (IS_ERR(child->bts)) { int error = PTR_ERR(child->bts); - kfree(child->bts_buffer); + ptrace_bts_free_buffer(child); child->bts = NULL; - child->bts_buffer = NULL; - child->bts_size = 0; return error; } @@ -784,6 +799,9 @@ static void ptrace_bts_untrace(struct task_struct *child) ds_release_bts(child->bts); child->bts = NULL; + /* We cannot update total_vm and locked_vm since + child's mm is already gone. But we can reclaim the + memory. */ kfree(child->bts_buffer); child->bts_buffer = NULL; child->bts_size = 0; @@ -792,7 +810,12 @@ static void ptrace_bts_untrace(struct task_struct *child) static void ptrace_bts_detach(struct task_struct *child) { - ptrace_bts_untrace(child); + if (unlikely(child->bts)) { + ds_release_bts(child->bts); + child->bts = NULL; + + ptrace_bts_free_buffer(child); + } } #else static inline void ptrace_bts_fork(struct task_struct *tsk) {} diff --git a/include/linux/mm.h b/include/linux/mm.h index ffee2f7..9979d3f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1286,5 +1286,7 @@ int vmemmap_populate_basepages(struct page *start_page, int vmemmap_populate(struct page *start_page, unsigned long pages, int node); void vmemmap_populate_print_last(void); +extern void *alloc_locked_buffer(size_t size); +extern void free_locked_buffer(void *buffer, size_t size); #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/mm/mlock.c b/mm/mlock.c index 1ada366..3035a56 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -667,3 +667,48 @@ void user_shm_unlock(size_t size, struct user_struct *user) spin_unlock(&shmlock_user_lock); free_uid(user); } + +void *alloc_locked_buffer(size_t size) +{ + unsigned long rlim, vm, pgsz; + void *buffer = NULL; + + pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT; + + down_write(¤t->mm->mmap_sem); + + rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; + vm = current->mm->total_vm + pgsz; + if (rlim < vm) + goto out; + + rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; + vm = current->mm->locked_vm + pgsz; + if (rlim < vm) + goto out; + + buffer = kzalloc(size, GFP_KERNEL); + if (!buffer) + goto out; + + current->mm->total_vm += pgsz; + current->mm->locked_vm += pgsz; + + out: + up_write(¤t->mm->mmap_sem); + return buffer; +} + +void free_locked_buffer(void *buffer, size_t size) +{ + unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT; + + down_write(¤t->mm->mmap_sem); + + current->mm->total_vm -= pgsz; + current->mm->locked_vm -= pgsz; + + up_write(¤t->mm->mmap_sem); + + kfree(buffer); +} -- cgit v1.1 From 280a9ca5d0663b185ddc4443052076c29652a328 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Sat, 20 Dec 2008 00:15:24 +0100 Subject: x86: fix resume (S2R) broken by Intel microcode module, on A110L Impact: fix deadlock This is in response to the following bug report: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12100 Subject : resume (S2R) broken by Intel microcode module, on A110L Submitter : Andreas Mohr Date : 2008-11-25 08:48 (19 days old) Handled-By : Dmitry Adamushko [ The deadlock scenario has been discovered by Andreas Mohr ] I think I might have a logical explanation why the system: (http://bugzilla.kernel.org/show_bug.cgi?id=12100) might hang upon resuming, OTOH it should have likely hanged each and every time. (1) possible deadlock in microcode_resume_cpu() if either 'if' section is taken; (2) now, I don't see it in spec. and can't experimentally verify it (newer ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should be back to its original one (we need to reload ucode anyway so it doesn't seem logical if a cpu doesn't drop the version)... if so, the comparison with memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of the aforementioned 'if' sections might have been triggered - leading to a deadlock. Obviously, in my tests I simulated loading/resuming with the ucode of the same version (just to see that the file is loaded/re-loaded upon resuming) so this issue has never popped up. I'd appreciate if someone with an appropriate system might give a try to the 2nd patch (titled "fix a comparison && deadlock..."). In any case, the deadlock situation is a must-have fix. Reported-by: Andreas Mohr Signed-off-by: Dmitry Adamushko Tested-by: Andreas Mohr Signed-off-by: Ingo Molnar Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_core.c | 19 ++++++++++++++----- arch/x86/kernel/microcode_intel.c | 6 ++++++ 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 82fb280..c4b5b24 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -272,13 +272,18 @@ static struct attribute_group mc_attr_group = { .name = "microcode", }; -static void microcode_fini_cpu(int cpu) +static void __microcode_fini_cpu(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - mutex_lock(µcode_mutex); microcode_ops->microcode_fini_cpu(cpu); uci->valid = 0; +} + +static void microcode_fini_cpu(int cpu) +{ + mutex_lock(µcode_mutex); + __microcode_fini_cpu(cpu); mutex_unlock(µcode_mutex); } @@ -306,12 +311,16 @@ static int microcode_resume_cpu(int cpu) * to this cpu (a bit of paranoia): */ if (microcode_ops->collect_cpu_info(cpu, &nsig)) { - microcode_fini_cpu(cpu); + __microcode_fini_cpu(cpu); + printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n", + cpu); return -1; } - if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) { - microcode_fini_cpu(cpu); + if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) { + __microcode_fini_cpu(cpu); + printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n", + cpu); /* Should we look for a new ucode here? */ return 1; } diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 622dc4a..a8e6279 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -155,6 +155,7 @@ static DEFINE_SPINLOCK(microcode_update_lock); static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu_num); + unsigned long flags; unsigned int val[2]; memset(csig, 0, sizeof(*csig)); @@ -174,11 +175,16 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) csig->pf = 1 << ((val[1] >> 18) & 7); } + /* serialize access to the physical write to MSR 0x79 */ + spin_lock_irqsave(µcode_update_lock, flags); + wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* see notes above for revision 1.07. Apparent chip bug */ sync_core(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); + spin_unlock_irqrestore(µcode_update_lock, flags); + pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", csig->sig, csig->pf, csig->rev); -- cgit v1.1 From 3d44cc3e01ee1b40317f79ed54324e25c4f848df Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 20 Dec 2008 21:27:34 +0100 Subject: Null pointer deref with hrtimer_try_to_cancel() Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW commit 2d42244ae71d6c7b0884b5664cf2eda30fb2ae68 (clocksource: introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only available to read out the raw not NTP adjusted system time. The above commit did not prevent that a posix timer can be created with that clockid. The timer_create() syscall succeeds and initializes the timer to a non existing hrtimer base. When the timer is deleted either by timer_delete() or by the exit() cleanup the kernel crashes. Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the posix clock function to no_timer_create which returns an error code. Reported-and-tested-by: Eric Sesterhenn Signed-off-by: Thomas Gleixner Acked-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- kernel/posix-timers.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 5e79c66..a140e44 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -197,6 +197,11 @@ static int common_timer_create(struct k_itimer *new_timer) return 0; } +static int no_timer_create(struct k_itimer *new_timer) +{ + return -EOPNOTSUPP; +} + /* * Return nonzero if we know a priori this clockid_t value is bogus. */ @@ -248,6 +253,7 @@ static __init int init_posix_timers(void) .clock_getres = hrtimer_get_res, .clock_get = posix_get_monotonic_raw, .clock_set = do_posix_clock_nosettime, + .timer_create = no_timer_create, }; register_posix_clock(CLOCK_REALTIME, &clock_realtime); -- cgit v1.1 From 3ddeb912f41801fd1968c7880d031702a396e4d0 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sat, 20 Dec 2008 17:15:14 +0800 Subject: ftrace: enable format arguments checking Impact: broaden gcc printf format checks for ftrace_printk() format arguments checking for ftrace_printk() is __printf(1, 2), not __printf(1, 0). Signed-off-by: Lai Jiangshan Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 04b52e6..677432b 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -303,7 +303,7 @@ extern void ftrace_dump(void); static inline void ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { } static inline int -ftrace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 0))); +ftrace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); static inline void tracing_start(void) { } static inline void tracing_stop(void) { } -- cgit v1.1 From 08d9d1c4d44ce43856da048cb0737ef769b61e9a Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 17 Dec 2008 18:19:18 -0800 Subject: MIPS: Fix preprocessor warnings flaged by GCC 4.4 Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index a8eac16..d58f128 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; */ #ifdef __MIPSEB__ #define ELF_DATA ELFDATA2MSB -#elif __MIPSEL__ +#elif defined(__MIPSEL__) #define ELF_DATA ELFDATA2LSB #endif #define ELF_ARCH EM_MIPS -- cgit v1.1 From ed2b03ed3cec2a4719d04ef208319f9de6a4258a Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 17 Dec 2008 13:28:39 -0800 Subject: MIPS: MIPS64R2: Fix buggy __arch_swab64 The way the code is written it was assuming dshd has the function of a hypothetical dshw instruction ... Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/byteorder.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h index 2988d29..33790b9 100644 --- a/arch/mips/include/asm/byteorder.h +++ b/arch/mips/include/asm/byteorder.h @@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( - " dsbh %0, %1 \n" - " dshd %0, %0 \n" - " drotr %0, %0, 32 \n" + " dsbh %0, %1\n" + " dshd %0, %0" : "=r" (x) : "r" (x)); -- cgit v1.1 From 9ecab6e5bf87f96dc2fa89cc9e8d5576fbde4325 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 22 Dec 2008 23:05:06 +0100 Subject: drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // Signed-off-by: Julia Lawall Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/cs5530.c | 3 ++- drivers/ide/sc1200.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 53f079c..d8ede85 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index f1a8758..ec7f766 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && -- cgit v1.1 From 077ebed54fe66612f58b076628a72eca2be8df90 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 22 Dec 2008 17:11:02 +1000 Subject: drm/radeon: fix correctness of irq_enabled check for radeon. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This check was introduced with the logic the wrong way around. Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216 Tested-by: François Valenduc Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 99be114..8289e16 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } @@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } -- cgit v1.1 From 231ffc9c07021afcfb1afa229aa4935730e5163b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 16 Dec 2008 23:09:35 -0300 Subject: V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command Fix a NULL pointer dereference that would occur if the video decoder tied to the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver) Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 610f535..4ea1f1e 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev) static void em28xx_config_i2c(struct em28xx *dev) { struct v4l2_routing route; + int zero = 0; route.input = INPUT(dev->ctl_input)->vmux; route.output = 0; - em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL); + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero); em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route); em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); } -- cgit v1.1 From a8ccf1d6f60e3e6ae63122e02378cd4d40dd4aac Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 23 Dec 2008 11:32:24 -0500 Subject: ring-buffer: fix dangling commit race Impact: fix stuck trace-buffers If an interrupt comes in during the rb_set_commit_to_write and pushes the tail page forward just at the right time, the commit updates will miss the adding of the interrupt data. This will cause the commit pointer to cease from moving forward. Thanks to Jiaying Zhang for finding this race. Reported-by: Jiaying Zhang Signed-off-by: Steven Rostedt Cc: Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index bb6922a..d03f4f4 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -838,6 +838,7 @@ rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) * back to us). This allows us to do a simple loop to * assign the commit to the tail. */ + again: while (cpu_buffer->commit_page != cpu_buffer->tail_page) { cpu_buffer->commit_page->page->commit = cpu_buffer->commit_page->write; @@ -853,6 +854,17 @@ rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) cpu_buffer->commit_page->write; barrier(); } + + /* again, keep gcc from optimizing */ + barrier(); + + /* + * If an interrupt came in just after the first while loop + * and pushed the tail page forward, we will be left with + * a dangling commit that will never go forward. + */ + if (unlikely(cpu_buffer->commit_page != cpu_buffer->tail_page)) + goto again; } static void rb_reset_reader_page(struct ring_buffer_per_cpu *cpu_buffer) -- cgit v1.1 From 98db8df777438e16ad0f44a0fba05ebbdb73db8d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 23 Dec 2008 11:32:25 -0500 Subject: ring-buffer: prevent false positive warning Impact: eliminate false WARN_ON message If an interrupt goes off after the setting of the local variable tail_page and before incrementing the write index of that page, the interrupt could push the commit forward to the next page. Later a check is made to see if interrupts pushed the buffer around the entire ring buffer by comparing the next page to the last commited page. This can produce a false positive if the interrupt had pushed the commit page forward as stated above. Thanks to Jiaying Zhang for finding this race. Reported-by: Jiaying Zhang Signed-off-by: Steven Rostedt Cc: Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index d03f4f4..76f34c0 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -962,12 +962,15 @@ static struct ring_buffer_event * __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, unsigned type, unsigned long length, u64 *ts) { - struct buffer_page *tail_page, *head_page, *reader_page; + struct buffer_page *tail_page, *head_page, *reader_page, *commit_page; unsigned long tail, write; struct ring_buffer *buffer = cpu_buffer->buffer; struct ring_buffer_event *event; unsigned long flags; + commit_page = cpu_buffer->commit_page; + /* we just need to protect against interrupts */ + barrier(); tail_page = cpu_buffer->tail_page; write = local_add_return(length, &tail_page->write); tail = write - length; @@ -993,7 +996,7 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, * it all the way around the buffer, bail, and warn * about it. */ - if (unlikely(next_page == cpu_buffer->commit_page)) { + if (unlikely(next_page == commit_page)) { WARN_ON_ONCE(1); goto out_unlock; } -- cgit v1.1 From cc6c2ca30074a0274c05dd3212c741a550f0d3c2 Mon Sep 17 00:00:00 2001 From: Chris Elston Date: Tue, 23 Dec 2008 13:57:10 -0800 Subject: rtc: rtc-isl1208: reject invalid dates This patch for the rtc-isl1208 driver makes it reject invalid dates. Signed-off-by: Chris Elston [a.zummo@towertech.it: added comment explaining the check] Signed-off-by: Alessandro Zummo Cc: Hebert Valerio Riedel Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-isl1208.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 2cd77ab..054e052 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm) int sr; u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; + /* The clock has an 8 bit wide bcd-coded register (they never learn) + * for the year. tm_year is an offset from 1900 and we are interested + * in the 2000-2099 range, so any value less than 100 is invalid. + */ + if (tm->tm_year < 100) + return -EINVAL; + regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec); regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min); regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL; -- cgit v1.1 From f00a189257836e5237ace3265f6991ef66a16c86 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 23 Dec 2008 13:57:12 -0800 Subject: w1: fix slave selection on big-endian systems During test of the w1-gpio driver i found that in "w1.c:679 w1_slave_found()" the device id is converted to little-endian with "cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293 w1_reset_select_slave()". Based on a patch created by Andreas Hummel. [akpm@linux-foundation.org: remove unneeded cast] Reported-by: Andreas Hummel Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/w1_io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 0d15b0e..5139c25 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl) w1_write_8(sl->master, W1_SKIP_ROM); else { u8 match[9] = {W1_MATCH_ROM, }; - memcpy(&match[1], (u8 *)&sl->reg_num, 8); + u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + + memcpy(&match[1], &rn, 8); w1_write_block(sl->master, match, 9); } return 0; -- cgit v1.1 From e368d3a836797ddf193b1ec18c97407a791d2451 Mon Sep 17 00:00:00 2001 From: Sharyathi Nagesh Date: Tue, 23 Dec 2008 13:57:12 -0800 Subject: cgroups: suppress bogus warning messages Remove spurious warning messages that are thrown onto the console during cgroup operations. Signed-off-by: Alexey Dobriyan Signed-off-by: Sharyathi Nagesh Acked-by: Serge E. Hallyn Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 8185a0f..a341550 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2934,9 +2934,6 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, again: root = subsys->root; if (root == &rootnode) { - printk(KERN_INFO - "Not cloning cgroup for unused subsystem %s\n", - subsys->name); mutex_unlock(&cgroup_mutex); return 0; } -- cgit v1.1 From 20ca9b3f4c6dfa0af8dd5b18a64df17eb994b54d Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 23 Dec 2008 13:57:14 -0800 Subject: cgroups: avoid accessing uninitialized data in failure path If cgroup_get_rootdir() failed, free_cg_links() will be called in the failure path, but tmp_cg_links hasn't been initialized at that time. I introduced this bug in the 2.6.27 merge window. Signed-off-by: Li Zefan Acked-by: Serge Hallyn Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index a341550..2606d0f 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1024,7 +1024,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type, if (ret == -EBUSY) { mutex_unlock(&cgroup_mutex); mutex_unlock(&inode->i_mutex); - goto drop_new_super; + goto free_cg_links; } /* EBUSY should be the only error here */ @@ -1073,10 +1073,11 @@ static int cgroup_get_sb(struct file_system_type *fs_type, return simple_set_mnt(mnt, sb); + free_cg_links: + free_cg_links(&tmp_cg_links); drop_new_super: up_write(&sb->s_umount); deactivate_super(sb); - free_cg_links(&tmp_cg_links); return ret; } -- cgit v1.1 From d519c8d9ccb7956e61a55ce3a0fd6a25f42cbb33 Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Tue, 23 Dec 2008 13:57:16 -0800 Subject: edac: fix edac core deadlock when removing a device When deleting an edac device, we have to wait for its edac_dev.work to be completed before deleting the whole edac_dev structure. Since we have no idea which work in current edac_poller's workqueue is the work we are conerned about, we wait for all work in the edac_poller's workqueue to be proceseed. This is done via flush_cpu_workqueue() which inserts a wq_barrier into the tail of the workqueue and then sleeping on the completion of this wq_barrier. The edac_poller will wake up sleepers when it is found. EDAC core creates only one kernel worker thread, edac_poller, to run the works of all current edac devices. They share the same callback function of edac_device_workq_function(), which would grab the mutex of device_ctls_mutex first before it checks the device. This is exactly where edac_poller and rmmod would have a great chance to deadlock. In below call trace of rmmod > ... > edac_device_del_device > edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue, device_ctls_mutex would have already been grabbed by edac_device_del_device(). So, on one hand rmmod would sleep on the completion of a wq_barrier, holding device_ctls_mutex; on the other hand edac_poller would be blocked on the same mutex when it's running any one of works of existing edac evices(Note, this edac_dev.work is likely to be totally irrelevant to the one that is being removed right now)and never would have a chance to run the work of above wq_barrier to wake rmmod up. edac_device_workq_teardown() should not be called within the critical region of device_ctls_mutex. Just like is done in edac_pci_del_device() and edac_mc_del_mc(), where edac_pci_workq_teardown() and edac_mc_workq_teardown() are called after related mutex are released. Moreover, an edac_dev.work should check first if it is being removed. If this is the case, then it should bail out immediately. Since not all of existing edac devices are to be removed, this "shutting flag" should be contained to edac device being removed. The current edac_dev.op_state can be used to serve this purpose. The original deadlock problem and the solution have been witnessed and tested on actual hardware. Without the solution, rmmod an edac driver would result in below deadlock: root@localhost:/root> rmmod mv64x60_edac EDAC DEBUG: mv64x60_dma_err_remove() EDAC DEBUG: edac_device_del_device() EDAC DEBUG: find_edac_device_by_dev() (hang for a moment) INFO: task edac-poller:2030 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. edac-poller D 00000000 0 2030 2 Call Trace: [df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable) [df159e80] [c000a024] __switch_to+0x6c/0xa0 [df159ea0] [c03587d8] schedule+0x2f4/0x4d8 [df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174 [df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core] [df159f60] [c003beb4] run_workqueue+0x114/0x218 [df159f90] [c003c674] worker_thread+0x5c/0xc8 [df159fd0] [c004106c] kthread+0x5c/0xa0 [df159ff0] [c0013538] original_kernel_thread+0x44/0x60 INFO: task rmmod:2062 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 0ff2c9fc 0 2062 1839 Call Trace: [df119c00] [c0437a74] 0xc0437a74 (unreliable) [df119cc0] [c000a024] __switch_to+0x6c/0xa0 [df119ce0] [c03587d8] schedule+0x2f4/0x4d8 [df119d40] [c03591dc] schedule_timeout+0xb0/0xf4 Signed-off-by: Linus Torvalds --- drivers/edac/edac_device.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index 5fcd3d8..4041e91 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req) mutex_lock(&device_ctls_mutex); + /* If we are being removed, bail out immediately */ + if (edac_dev->op_state == OP_OFFLINE) { + mutex_unlock(&device_ctls_mutex); + return; + } + /* Only poll controllers that are running polled and have a check */ if ((edac_dev->op_state == OP_RUNNING_POLL) && (edac_dev->edac_check != NULL)) { @@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev) /* mark this instance as OFFLINE */ edac_dev->op_state = OP_OFFLINE; - /* clear workq processing on this instance */ - edac_device_workq_teardown(edac_dev); - /* deregister from global list */ del_edac_device_from_global_list(edac_dev); mutex_unlock(&device_ctls_mutex); + /* clear workq processing on this instance */ + edac_device_workq_teardown(edac_dev); + /* Tear down the sysfs entries for this instance */ edac_device_remove_sysfs(edac_dev); -- cgit v1.1 From 5289f46b9de04bde181d833d48df9671b69c4b08 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 23 Dec 2008 08:44:30 -0500 Subject: parisc: disable UP-optimized flush_tlb_mm flush_tlb_mm's "optimized" uniprocessor case of allocating a new context for userspace is exposing a race where we can suddely return to a syscall with the protection id and space id out of sync, trapping on the next userspace access. Debugged-by: James Bottomley Tested-by: Helge Deller Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/tlbflush.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index b72ec66..1f6fd4f 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm) { BUG_ON(mm == &init_mm); /* Should never happen */ -#ifdef CONFIG_SMP +#if 1 || defined(CONFIG_SMP) flush_tlb_all(); #else + /* FIXME: currently broken, causing space id and protection ids + * to go out of sync, resulting in faults on userspace accesses. + */ if (mm) { if (mm->context != 0) free_sid(mm->context); -- cgit v1.1 From 40f15ad8aadff5ebb621b17a6f303ad2cd3f847d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 24 Dec 2008 10:49:51 +0100 Subject: x86: disable X86_PTRACE_BTS there's a new ptrace arch level feature in .28: config X86_PTRACE_BTS bool "Branch Trace Store" it has broken fork() handling: the old DS area gets copied over into a new task without clearing it. Fixes exist but they came too late: c5dee61: x86, bts: memory accounting bf53de9: x86, bts: add fork and exit handling and are queued up for v2.6.29. This shows that the facility is still not tested well enough to release into a stable kernel - disable it for now and reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS facilities too - hopefully resulting in better code. Signed-off-by: Ingo Molnar --- arch/x86/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index b815664..8e99073 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -520,6 +520,7 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR + depends on BROKEN help This adds a ptrace interface to the hardware's branch trace store. -- cgit v1.1 From 574f3c4f5c55e99ea60f71fd98cc54931d4b2eae Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 23 Dec 2008 16:53:00 -0200 Subject: ALSA: hda - Add missing terminators in patch_sigmatel.c Signed-off-by: Herton Ronaldo Krzesinski Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 596ceab..b77f330 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -859,6 +859,7 @@ static struct hda_verb stac92hd83xxx_core_init[] = { /* power state controls amps */ { 0x01, AC_VERB_SET_EAPD, 1 << 2}, + {} }; static struct hda_verb stac92hd71bxx_core_init[] = { @@ -870,6 +871,7 @@ static struct hda_verb stac92hd71bxx_core_init[] = { { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {} }; #define HD_DISABLE_PORTF 2 @@ -1667,6 +1669,7 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + {} /* terminator */ }; static unsigned int ref92hd71bxx_pin_configs[11] = { -- cgit v1.1 From 67be403d897f818b1a5ecc201967b0ee6a0332f9 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 24 Dec 2008 21:08:37 +0100 Subject: Revert "x86: disable X86_PTRACE_BTS" This reverts commit 40f15ad8aadff5ebb621b17a6f303ad2cd3f847d. The CONFIG_X86_PTRACE_BTS bugs have been fixed via: c5dee61: x86, bts: memory accounting bf53de9: x86, bts: add fork and exit handling Signed-off-by: Ingo Molnar --- arch/x86/Kconfig.cpu | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index b54903ef..85a7857 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -521,7 +521,6 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR - depends on BROKEN help This adds a ptrace interface to the hardware's branch trace store. -- cgit v1.1 From 4a6908a3a050aacc9c3a2f36b276b46c0629ad91 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 24 Dec 2008 15:26:37 -0800 Subject: Linux 2.6.28 Happy holidays.. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4c8d797..71e98e9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc9 +EXTRAVERSION = NAME = Erotic Pickled Herring # *DOCUMENTATION* -- cgit v1.1 From 0ca59dd948a51c95d5a366d35f897bc5ef9df55d Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 24 Dec 2008 23:30:02 +0100 Subject: tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3 Impact: fix a crash/hard-reboot on certain configs while enabling cpu runtime On some archs, the boot of a secondary cpu can have an early fragile state. On x86-64, the pda is not initialized on the first stage of a cpu boot but it is needed to get the cpu number and the current task pointer. This data is needed during tracing. As they were dereferenced at this stage, we got a crash while tracing a cpu being enabled at runtime. Some other archs like ia64 can have such kind of issue too. Changes on v2: We dropped the previous solution of a per-arch called function to guess the current state of a cpu. That could slow down the tracing. This patch removes the -pg flag on arch/x86/kernel/cpu/common.c where the low level cpu boot functions exist, on start_secondary() and a helper function used at this stage. Signed-off-by: Frederic Weisbecker Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- arch/x86/include/asm/msr.h | 3 ++- arch/x86/kernel/cpu/Makefile | 5 +++++ arch/x86/kernel/smpboot.c | 2 +- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index c2a812e..b8a1799 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -85,7 +85,8 @@ static inline void native_write_msr(unsigned int msr, asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory"); } -static inline int native_write_msr_safe(unsigned int msr, +/* Can be uninlined because referenced by paravirt */ +notrace static inline int native_write_msr_safe(unsigned int msr, unsigned low, unsigned high) { int err; diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 82ec607..4ae495a 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -2,6 +2,11 @@ # Makefile for x86-compatible CPU details and quirks # +# Don't trace early stages of a secondary CPU boot +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_common.o = -pg +endif + obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o capflags.o powerflags.o common.o diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index f71f96f..f6174d2 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -287,7 +287,7 @@ static int __cpuinitdata unsafe_smp; /* * Activate a secondary processor. */ -static void __cpuinit start_secondary(void *unused) +notrace static void __cpuinit start_secondary(void *unused) { /* * Don't put *anything* before cpu_init(), SMP booting is too -- cgit v1.1 From 468a15bb4cc61694495cc5ed7ffca29e87c79b69 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 16 Dec 2008 08:07:03 +0100 Subject: sched, trace: update trace_sched_wakeup() Impact: extend the wakeup tracepoint with the info whether the wakeup was real Add the information needed to distinguish 'real' wakeups from 'false' wakeups. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/trace/sched.h | 4 ++-- kernel/sched.c | 2 +- kernel/trace/trace_sched_switch.c | 2 +- kernel/trace/trace_sched_wakeup.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/trace/sched.h b/include/trace/sched.h index bc4c9ea..0d81098 100644 --- a/include/trace/sched.h +++ b/include/trace/sched.h @@ -17,8 +17,8 @@ DECLARE_TRACE(sched_wait_task, TPARGS(rq, p)); DECLARE_TRACE(sched_wakeup, - TPPROTO(struct rq *rq, struct task_struct *p), - TPARGS(rq, p)); + TPPROTO(struct rq *rq, struct task_struct *p, int success), + TPARGS(rq, p, success)); DECLARE_TRACE(sched_wakeup_new, TPPROTO(struct rq *rq, struct task_struct *p, int success), diff --git a/kernel/sched.c b/kernel/sched.c index ceda579..dcb39bc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2324,7 +2324,7 @@ out_activate: success = 1; out_running: - trace_sched_wakeup(rq, p); + trace_sched_wakeup(rq, p, success); check_preempt_curr(rq, p, sync); p->state = TASK_RUNNING; diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index add2c1f..df175cb 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -49,7 +49,7 @@ probe_sched_switch(struct rq *__rq, struct task_struct *prev, } static void -probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee) +probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee, int success) { struct trace_array_cpu *data; unsigned long flags; diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 0067b49..43586b6 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -211,7 +211,7 @@ static void wakeup_reset(struct trace_array *tr) } static void -probe_wakeup(struct rq *rq, struct task_struct *p) +probe_wakeup(struct rq *rq, struct task_struct *p, int success) { int cpu = smp_processor_id(); unsigned long flags; -- cgit v1.1