From 4737f0978d6e64eae468e01fa181abf6499e6b84 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 5 Jun 2009 00:44:53 +0200 Subject: trivial: Kconfig: .ko is normally not included in module names .ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek Signed-off-by: Jiri Kosina --- arch/blackfin/Kconfig | 2 +- drivers/block/Kconfig | 2 +- drivers/char/Kconfig | 2 +- drivers/connector/Kconfig | 2 +- drivers/crypto/Kconfig | 6 +++--- drivers/ide/Kconfig | 2 +- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/mtd/devices/Kconfig | 2 +- drivers/mtd/nand/Kconfig | 4 ++-- drivers/net/Kconfig | 4 ++-- drivers/net/wireless/Kconfig | 2 +- drivers/net/wireless/hostap/Kconfig | 8 ++++---- drivers/net/wireless/iwlwifi/Kconfig | 4 ++-- drivers/net/wireless/rt2x00/Kconfig | 14 +++++++------- drivers/s390/net/Kconfig | 14 +++++++------- drivers/serial/Kconfig | 2 +- drivers/w1/Kconfig | 2 +- drivers/w1/masters/Kconfig | 6 +++--- drivers/watchdog/Kconfig | 2 +- net/ipv6/Kconfig | 2 +- net/netfilter/Kconfig | 4 ++-- 21 files changed, 44 insertions(+), 44 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 3640cdc..bc9ce89 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -872,7 +872,7 @@ config BFIN_GPTIMERS are unsure, say N. To compile this driver as a module, choose M here: the module - will be called gptimers.ko. + will be called gptimers. choice prompt "Uncached DMA region" diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index f42fa50..1b98cc5 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -112,7 +112,7 @@ config GDROM with up to 1 GB of data. This drive will also read standard CD ROM disks. Select this option to access any disks in your GD ROM drive. Most users will want to say "Y" here. - You can also build this as a module which will be called gdrom.ko + You can also build this as a module which will be called gdrom. source "drivers/block/paride/Kconfig" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 02ecfd5..067e9dc 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -692,7 +692,7 @@ config HVCS this driver. To compile this driver as a module, choose M here: the - module will be called hvcs.ko. Additionally, this module + module will be called hvcs. Additionally, this module will depend on arch specific APIs exported from hvcserver.ko which will also be compiled when this driver is built as a module. diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig index 100bfd42..6e6730f 100644 --- a/drivers/connector/Kconfig +++ b/drivers/connector/Kconfig @@ -7,7 +7,7 @@ menuconfig CONNECTOR of the netlink socket protocol. Connector support can also be built as a module. If so, the module - will be called cn.ko. + will be called cn. if CONNECTOR diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 01afd75..3e72a6a 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES Available in VIA C3 and newer CPUs. If unsure say M. The compiled module will be - called padlock-aes.ko + called padlock-aes. config CRYPTO_DEV_PADLOCK_SHA tristate "PadLock driver for SHA1 and SHA256 algorithms" @@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA Available in VIA C7 and newer processors. If unsure say M. The compiled module will be - called padlock-sha.ko + called padlock-sha. config CRYPTO_DEV_GEODE tristate "Support for the Geode LX AES engine" @@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC bool "Monolithic zcrypt module" depends on ZCRYPT="m" help - Select this option if you want to have a single module z90crypt.ko + Select this option if you want to have a single module z90crypt, that contains all parts of the crypto device driver (ap bus, request router and all the card drivers). diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf06494..9a5d0aa 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -46,7 +46,7 @@ menuconfig IDE SMART parameters from disk drives. To compile this driver as a module, choose M here: the - module will be called ide-core.ko. + module will be called ide-core. For further information, please read . diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 60955a7..1bb66e1 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -216,7 +216,7 @@ config DVB_USB_TTUSB2 help Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the - old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko. + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. config DVB_USB_DTT200U tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 6fde0a2..325fab92 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -49,7 +49,7 @@ config MTD_MS02NV If you want to compile this driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . - The module will be called ms02-nv.ko. + The module will be called ms02-nv. config MTD_DATAFLASH tristate "Support for AT45xxx DataFlash" diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 890936d..f327689 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE help This enables the driver for the NAND flash device found on the Basler eXcite Smart Camera. If built as a module, the driver - will be named "excite_nandflash.ko". + will be named excite_nandflash. config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" @@ -282,7 +282,7 @@ config MTD_NAND_CS553X controller is enabled for NAND, and currently requires that the controller be in MMIO mode. - If you say "m", the module will be called "cs553x_nand.ko". + If you say "m", the module will be called cs553x_nand. config MTD_NAND_ATMEL tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32" diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 214a92d..b4683ce 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1880,7 +1880,7 @@ config FEC_MPC52xx ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller - If compiled as module, it will be called 'fec_mpc52xx.ko'. + If compiled as module, it will be called fec_mpc52xx. config FEC_MPC52xx_MDIO bool "MPC52xx FEC MDIO bus driver" @@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO (Motorola? industry standard). If your board uses an external PHY connected to FEC, enable this. If not sure, enable. - If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. + If compiled as module, it will be called fec_mpc52xx_phy. config NE_H8300 tristate "NE2000 compatible support for H8/300" diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 3d94e7d..3359497 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -310,7 +310,7 @@ config PRISM54 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . - The module will be called prism54.ko. + The module will be called prism54. config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig index 932d207..c15db22 100644 --- a/drivers/net/wireless/hostap/Kconfig +++ b/drivers/net/wireless/hostap/Kconfig @@ -29,7 +29,7 @@ config HOSTAP PLX/PCI/CS version of the driver to actually use the driver. The driver can be compiled as a module and it will be called - "hostap.ko". + hostap. config HOSTAP_FIRMWARE bool "Support downloading firmware images with Host AP driver" @@ -68,7 +68,7 @@ config HOSTAP_PLX driver. The driver can be compiled as a module and will be named - "hostap_plx.ko". + hostap_plx. config HOSTAP_PCI tristate "Host AP driver for Prism2.5 PCI adaptors" @@ -81,7 +81,7 @@ config HOSTAP_PCI driver. The driver can be compiled as a module and will be named - "hostap_pci.ko". + hostap_pci. config HOSTAP_CS tristate "Host AP driver for Prism2/2.5/3 PC Cards" @@ -94,4 +94,4 @@ config HOSTAP_CS driver. The driver can be compiled as a module and will be named - "hostap_cs.ko". + hostap_cs. diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 8304f64..7361623 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -75,7 +75,7 @@ config IWLAGN If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwlagn.ko. + module will be called iwlagn. config IWL4965 @@ -113,7 +113,7 @@ config IWL3945 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwl3945.ko. + module will be called iwl3945. config IWL3945_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwl3945 driver" diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index bfc5d9c..1ae11c7 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -9,11 +9,11 @@ menuconfig RT2X00 When building one of the individual drivers, the rt2x00 library will also be created. That library (when the driver is built as - a module) will be called "rt2x00lib.ko". + a module) will be called rt2x00lib. Additionally PCI and USB libraries will also be build depending on the types of drivers being selected, these libraries will be - called "rt2x00pci.ko" and "rt2x00usb.ko". + called rt2x00pci and rt2x00usb. if RT2X00 @@ -26,7 +26,7 @@ config RT2400PCI This adds support for rt2400 wireless chipset family. Supported chips: RT2460. - When compiled as a module, this driver will be called "rt2400pci.ko". + When compiled as a module, this driver will be called rt2400pci. config RT2500PCI tristate "Ralink rt2500 (PCI/PCMCIA) support" @@ -37,7 +37,7 @@ config RT2500PCI This adds support for rt2500 wireless chipset family. Supported chips: RT2560. - When compiled as a module, this driver will be called "rt2500pci.ko". + When compiled as a module, this driver will be called rt2500pci. config RT61PCI tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" @@ -51,7 +51,7 @@ config RT61PCI This adds support for rt2501 wireless chipset family. Supported chips: RT2561, RT2561S & RT2661. - When compiled as a module, this driver will be called "rt61pci.ko". + When compiled as a module, this driver will be called rt61pci. config RT2500USB tristate "Ralink rt2500 (USB) support" @@ -62,7 +62,7 @@ config RT2500USB This adds support for rt2500 wireless chipset family. Supported chips: RT2571 & RT2572. - When compiled as a module, this driver will be called "rt2500usb.ko". + When compiled as a module, this driver will be called rt2500usb. config RT73USB tristate "Ralink rt2501/rt73 (USB) support" @@ -75,7 +75,7 @@ config RT73USB This adds support for rt2501 wireless chipset family. Supported chips: RT2571W, RT2573 & RT2671. - When compiled as a module, this driver will be called "rt73usb.ko". + When compiled as a module, this driver will be called rt73usb. config RT2X00_LIB_PCI tristate diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index a7745c8..cb909a5 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -8,7 +8,7 @@ config LCS Select this option if you want to use LCS networking on IBM System z. This device driver supports Token Ring (IEEE 802.5), FDDI (IEEE 802.7) and Ethernet. - To compile as a module, choose M. The module name is lcs.ko. + To compile as a module, choose M. The module name is lcs. If you do not know what it is, it's safe to choose Y. config CTCM @@ -21,7 +21,7 @@ config CTCM It also supports virtual CTCs when running under VM. This driver also supports channel-to-channel MPC SNA devices. MPC is an SNA protocol device used by Communication Server for Linux. - To compile as a module, choose M. The module name is ctcm.ko. + To compile as a module, choose M. The module name is ctcm. To compile into the kernel, choose Y. If you do not need any channel-to-channel connection, choose N. @@ -34,7 +34,7 @@ config NETIUCV link between VM guests. Using ifconfig a point-to-point connection can be established to the Linux on IBM System z running on the other VM guest. To compile as a module, choose M. - The module name is netiucv.ko. If unsure, choose Y. + The module name is netiucv. If unsure, choose Y. config SMSGIUCV tristate "IUCV special message support (VM only)" @@ -50,7 +50,7 @@ config CLAW This driver supports channel attached CLAW devices. CLAW is Common Link Access for Workstation. Common devices that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices. - To compile as a module, choose M. The module name is claw.ko. + To compile as a module, choose M. The module name is claw. To compile into the kernel, choose Y. config QETH @@ -65,14 +65,14 @@ config QETH To compile this driver as a module, choose M. - The module name is qeth.ko. + The module name is qeth. config QETH_L2 tristate "qeth layer 2 device support" depends on QETH help Select this option to be able to run qeth devices in layer 2 mode. - To compile as a module, choose M. The module name is qeth_l2.ko. + To compile as a module, choose M. The module name is qeth_l2. If unsure, choose y. config QETH_L3 @@ -80,7 +80,7 @@ config QETH_L3 depends on QETH help Select this option to be able to run qeth devices in layer 3 mode. - To compile as a module choose M. The module name is qeth_l3.ko. + To compile as a module choose M. The module name is qeth_l3. If unsure, choose Y. config QETH_IPV6 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 641e800..1132c5c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -861,7 +861,7 @@ config SERIAL_UARTLITE Say Y here if you want to use the Xilinx uartlite serial controller. To compile this driver as a module, choose M here: the - module will be called uartlite.ko. + module will be called uartlite. config SERIAL_UARTLITE_CONSOLE bool "Support for console on Xilinx uartlite serial port" diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 9adbb4f..fd2c7bd 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -8,7 +8,7 @@ menuconfig W1 If you want W1 support, you should say Y here. This W1 support can also be built as a module. If so, the module - will be called wire.ko. + will be called wire. if W1 diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 96d2f8e..3195fb8 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -12,7 +12,7 @@ config W1_MASTER_MATROX using Matrox's G400 GPIO pins. This support is also available as a module. If so, the module - will be called matrox_w1.ko. + will be called matrox_w1. config W1_MASTER_DS2490 tristate "DS2490 USB <-> W1 transport layer for 1-wire" @@ -22,7 +22,7 @@ config W1_MASTER_DS2490 for example DS9490*. This support is also available as a module. If so, the module - will be called ds2490.ko. + will be called ds2490. config W1_MASTER_DS2482 tristate "Maxim DS2482 I2C to 1-Wire bridge" @@ -56,7 +56,7 @@ config W1_MASTER_GPIO GPIO pins. This driver uses the GPIO API to control the wire. This support is also available as a module. If so, the module - will be called w1-gpio.ko. + will be called w1-gpio. config HDQ_MASTER_OMAP tristate "OMAP HDQ driver" diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 5eb8f21..452082f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -531,7 +531,7 @@ config SBC8360_WDT Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). To compile this driver as a module, choose M here: the - module will be called sbc8360.ko. + module will be called sbc8360. Most people will say N. diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index ca8cb326..ead6c7a 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -168,7 +168,7 @@ config IPV6_SIT into IPv4 packets. This is useful if you want to connect two IPv6 networks over an IPv4-only path. - Saying M here will produce a module called sit.ko. If unsure, say Y. + Saying M here will produce a module called sit. If unsure, say Y. config IPV6_NDISC_NODETYPE bool diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index cb3ad74..c26a20c 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK If you want to compile it as a module, say M here and read . The module will be called - ipt_CONNMARK.ko. If unsure, say `N'. + ipt_CONNMARK. If unsure, say `N'. config NETFILTER_XT_TARGET_CONNSECMARK tristate '"CONNSECMARK" target support' @@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK If you want to compile it as a module, say M here and read . The module will be called - ipt_connmark.ko. If unsure, say `N'. + ipt_connmark. If unsure, say `N'. config NETFILTER_XT_MATCH_CONNTRACK tristate '"conntrack" connection tracking match support' -- cgit v1.1