From 31fbcda71489d8cbe2b82819eaab4818524e3a49 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 28 Sep 2012 10:29:07 +0100 Subject: Input: bu21013_ts - move GPIO init and exit functions into the driver These GPIO init and exit functions have no place in platform data, they should be part of the driver instead, Acked-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Dmitry Torokhov --- arch/arm/mach-ux500/board-mop500-stuib.c | 71 +------------------------------- drivers/input/touchscreen/bu21013_ts.c | 69 ++++++++++++++++++++++--------- include/linux/input/bu21013.h | 10 +---- 3 files changed, 53 insertions(+), 97 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c index 564f57d..7e1f294 100644 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -77,9 +77,6 @@ static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { * BU21013 ROHM touchscreen interface on the STUIBs */ -/* tracks number of bu21013 devices being enabled */ -static int bu21013_devices; - #define TOUCH_GPIO_PIN 84 #define TOUCH_XMAX 384 @@ -88,73 +85,8 @@ static int bu21013_devices; #define PRCMU_CLOCK_OCR 0x1CC #define TSC_EXT_CLOCK_9_6MHZ 0x840000 -/** - * bu21013_gpio_board_init : configures the touch panel. - * @reset_pin: reset pin number - * This function can be used to configures - * the voltage and reset the touch panel controller. - */ -static int bu21013_gpio_board_init(int reset_pin) -{ - int retval = 0; - - bu21013_devices++; - if (bu21013_devices == 1) { - retval = gpio_request(reset_pin, "touchp_reset"); - if (retval) { - printk(KERN_ERR "Unable to request gpio reset_pin"); - return retval; - } - retval = gpio_direction_output(reset_pin, 1); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - } - - return retval; -} - -/** - * bu21013_gpio_board_exit : deconfigures the touch panel controller - * @reset_pin: reset pin number - * This function can be used to deconfigures the chip selection - * for touch panel controller. - */ -static int bu21013_gpio_board_exit(int reset_pin) -{ - int retval = 0; - - if (bu21013_devices == 1) { - retval = gpio_direction_output(reset_pin, 0); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - gpio_set_value(reset_pin, 0); - } - bu21013_devices--; - - return retval; -} - -/** - * bu21013_read_pin_val : get the interrupt pin value - * This function can be used to get the interrupt pin value for touch panel - * controller. - */ -static int bu21013_read_pin_val(void) -{ - return gpio_get_value(TOUCH_GPIO_PIN); -} - static struct bu21013_platform_device tsc_plat_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), + .touch_pin = TOUCH_GPIO_PIN, .touch_x_max = TOUCH_XMAX, .touch_y_max = TOUCH_YMAX, .ext_clk = false, @@ -171,7 +103,6 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { I2C_BOARD_INFO("bu21013_tp", 0x5D), .platform_data = &tsc_plat_device, }, - }; void __init mop500_stuib_init(void) diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 1e8cddd..c6f6a04 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -14,6 +14,7 @@ #include #include #include +#include #define PEN_DOWN_INTR 0 #define MAX_FINGERS 2 @@ -148,11 +149,12 @@ struct bu21013_ts_data { struct i2c_client *client; wait_queue_head_t wait; - bool touch_stopped; const struct bu21013_platform_device *chip; struct input_dev *in_dev; - unsigned int intr_pin; struct regulator *regulator; + unsigned int irq; + unsigned int intr_pin; + bool touch_stopped; }; /** @@ -262,7 +264,7 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data) return IRQ_NONE; } - data->intr_pin = data->chip->irq_read_val(); + data->intr_pin = gpio_get_value(data->chip->touch_pin); if (data->intr_pin == PEN_DOWN_INTR) wait_event_timeout(data->wait, data->touch_stopped, msecs_to_jiffies(2)); @@ -418,10 +420,33 @@ static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data) { bu21013_data->touch_stopped = true; wake_up(&bu21013_data->wait); - free_irq(bu21013_data->chip->irq, bu21013_data); + free_irq(bu21013_data->irq, bu21013_data); } /** + * bu21013_cs_disable() - deconfigures the touch panel controller + * @bu21013_data: device structure pointer + * + * This function is used to deconfigure the chip selection + * for touch panel controller. + */ +static void bu21013_cs_disable(struct bu21013_ts_data *bu21013_data) +{ + int error; + + error = gpio_direction_output(bu21013_data->chip->cs_pin, 0); + if (error < 0) + dev_warn(&bu21013_data->client->dev, + "%s: gpio direction failed, error: %d\n", + __func__, error); + else + gpio_set_value(bu21013_data->chip->cs_pin, 0); + + gpio_free(bu21013_data->chip->cs_pin); +} + + +/** * bu21013_probe() - initializes the i2c-client touchscreen driver * @client: i2c client structure pointer * @id: i2c device id pointer @@ -430,7 +455,7 @@ static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data) * driver and returns integer. */ static int bu21013_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct bu21013_ts_data *bu21013_data; struct input_dev *in_dev; @@ -449,6 +474,11 @@ static int bu21013_probe(struct i2c_client *client, return -EINVAL; } + if (!gpio_is_valid(pdata->touch_pin)) { + dev_err(&client->dev, "invalid touch_pin supplied\n"); + return -EINVAL; + } + bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL); in_dev = input_allocate_device(); if (!bu21013_data || !in_dev) { @@ -460,6 +490,7 @@ static int bu21013_probe(struct i2c_client *client, bu21013_data->in_dev = in_dev; bu21013_data->chip = pdata; bu21013_data->client = client; + bu21013_data->irq = gpio_to_irq(pdata->touch_pin); bu21013_data->regulator = regulator_get(&client->dev, "avdd"); if (IS_ERR(bu21013_data->regulator)) { @@ -478,12 +509,11 @@ static int bu21013_probe(struct i2c_client *client, init_waitqueue_head(&bu21013_data->wait); /* configure the gpio pins */ - if (pdata->cs_en) { - error = pdata->cs_en(pdata->cs_pin); - if (error < 0) { - dev_err(&client->dev, "chip init failed\n"); - goto err_disable_regulator; - } + error = gpio_request_one(pdata->cs_pin, GPIOF_OUT_INIT_HIGH, + "touchp_reset"); + if (error < 0) { + dev_err(&client->dev, "Unable to request gpio reset_pin\n"); + goto err_disable_regulator; } /* configure the touch panel controller */ @@ -508,12 +538,13 @@ static int bu21013_probe(struct i2c_client *client, pdata->touch_y_max, 0, 0); input_set_drvdata(in_dev, bu21013_data); - error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq, + error = request_threaded_irq(bu21013_data->irq, NULL, bu21013_gpio_irq, IRQF_TRIGGER_FALLING | IRQF_SHARED | IRQF_ONESHOT, DRIVER_TP, bu21013_data); if (error) { - dev_err(&client->dev, "request irq %d failed\n", pdata->irq); + dev_err(&client->dev, "request irq %d failed\n", + bu21013_data->irq); goto err_cs_disable; } @@ -531,7 +562,7 @@ static int bu21013_probe(struct i2c_client *client, err_free_irq: bu21013_free_irq(bu21013_data); err_cs_disable: - pdata->cs_dis(pdata->cs_pin); + bu21013_cs_disable(bu21013_data); err_disable_regulator: regulator_disable(bu21013_data->regulator); err_put_regulator: @@ -555,7 +586,7 @@ static int bu21013_remove(struct i2c_client *client) bu21013_free_irq(bu21013_data); - bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin); + bu21013_cs_disable(bu21013_data); input_unregister_device(bu21013_data->in_dev); @@ -584,9 +615,9 @@ static int bu21013_suspend(struct device *dev) bu21013_data->touch_stopped = true; if (device_may_wakeup(&client->dev)) - enable_irq_wake(bu21013_data->chip->irq); + enable_irq_wake(bu21013_data->irq); else - disable_irq(bu21013_data->chip->irq); + disable_irq(bu21013_data->irq); regulator_disable(bu21013_data->regulator); @@ -621,9 +652,9 @@ static int bu21013_resume(struct device *dev) bu21013_data->touch_stopped = false; if (device_may_wakeup(&client->dev)) - disable_irq_wake(bu21013_data->chip->irq); + disable_irq_wake(bu21013_data->irq); else - enable_irq(bu21013_data->chip->irq); + enable_irq(bu21013_data->irq); return 0; } diff --git a/include/linux/input/bu21013.h b/include/linux/input/bu21013.h index 05e0328..6230d76 100644 --- a/include/linux/input/bu21013.h +++ b/include/linux/input/bu21013.h @@ -9,13 +9,10 @@ /** * struct bu21013_platform_device - Handle the platform data - * @cs_en: pointer to the cs enable function - * @cs_dis: pointer to the cs disable function - * @irq_read_val: pointer to read the pen irq value function * @touch_x_max: touch x max * @touch_y_max: touch y max * @cs_pin: chip select pin - * @irq: irq pin + * @touch_pin: touch gpio pin * @ext_clk: external clock flag * @x_flip: x flip flag * @y_flip: y flip flag @@ -24,13 +21,10 @@ * This is used to handle the platform data */ struct bu21013_platform_device { - int (*cs_en)(int reset_pin); - int (*cs_dis)(int reset_pin); - int (*irq_read_val)(void); int touch_x_max; int touch_y_max; unsigned int cs_pin; - unsigned int irq; + unsigned int touch_pin; bool ext_clk; bool x_flip; bool y_flip; -- cgit v1.1