From 0a87e3e92b299e0f1a69b36664ecde2fc296c40a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 1 Feb 2008 18:02:30 -0500 Subject: Rename: linux/pata_platform.h to linux/ata_platform.h Signed-off-by: Jeff Garzik --- arch/arm/mach-rpc/riscpc.c | 2 +- arch/blackfin/mach-bf527/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/boards/H8606.c | 2 +- arch/blackfin/mach-bf533/boards/cm_bf533.c | 2 +- arch/blackfin/mach-bf533/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/boards/stamp.c | 2 +- arch/blackfin/mach-bf537/boards/cm_bf537.c | 2 +- arch/blackfin/mach-bf537/boards/generic_board.c | 2 +- arch/blackfin/mach-bf537/boards/minotaur.c | 2 +- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- arch/blackfin/mach-bf561/boards/cm_bf561.c | 2 +- arch/blackfin/mach-bf561/boards/ezkit.c | 2 +- arch/sh/boards/landisk/setup.c | 2 +- arch/sh/boards/lboxre2/setup.c | 2 +- arch/sh/boards/renesas/r7780rp/setup.c | 2 +- arch/sh/boards/renesas/rts7751r2d/setup.c | 2 +- arch/sh/boards/renesas/sdk7780/setup.c | 2 +- arch/sh/boards/se/7722/setup.c | 2 +- drivers/ata/pata_of_platform.c | 2 +- drivers/ata/pata_platform.c | 2 +- drivers/ide/legacy/ide_platform.c | 2 +- include/linux/ata_platform.h | 27 +++++++++++++++++++++++++ include/linux/pata_platform.h | 27 ------------------------- 23 files changed, 48 insertions(+), 48 deletions(-) create mode 100644 include/linux/ata_platform.h delete mode 100644 include/linux/pata_platform.h diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index a454451..eca558c 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index f8c411a..1795aab 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -37,7 +37,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index a72c7a6..97378b0 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -38,7 +38,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 21df2f3..886f260 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index c37dd45..4026c2f 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ac52b04..0185350 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -38,7 +38,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 8703b67..f7c1f96 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 3e52f3f..8a3397d 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -38,7 +38,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index b8bbba8..d71e0be 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -10,7 +10,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 7725415..119e6ea 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -38,7 +38,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 3a79a90..bf9e738 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 7601c3b..ed863ce 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index eda7176..2b708ec 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -14,7 +14,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c index 9c830fd..c74440d 100644 --- a/arch/sh/boards/lboxre2/setup.c +++ b/arch/sh/boards/lboxre2/setup.c @@ -13,7 +13,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index a43b477..f7a8d5c 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -15,7 +15,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 3452b07..a0ef81b 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -10,7 +10,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/renesas/sdk7780/setup.c index 5df32f2..acc5932 100644 --- a/arch/sh/boards/renesas/sdk7780/setup.c +++ b/arch/sh/boards/renesas/sdk7780/setup.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index eb97dca..b1a3d9d 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -12,7 +12,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c index 938f48a..408da30 100644 --- a/drivers/ata/pata_of_platform.c +++ b/drivers/ata/pata_of_platform.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static int __devinit pata_of_platform_probe(struct of_device *ofdev, const struct of_device_id *match) diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 224bb6c..aad7adc 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #define DRV_NAME "pata_platform" #define DRV_VERSION "1.2" diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 26c82ce..688fcae 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h new file mode 100644 index 0000000..6a7a92d --- /dev/null +++ b/include/linux/ata_platform.h @@ -0,0 +1,27 @@ +#ifndef __LINUX_PATA_PLATFORM_H +#define __LINUX_PATA_PLATFORM_H + +struct pata_platform_info { + /* + * I/O port shift, for platforms with ports that are + * constantly spaced and need larger than the 1-byte + * spacing used by ata_std_ports(). + */ + unsigned int ioport_shift; + /* + * Indicate platform specific irq types and initial + * IRQ flags when call request_irq() + */ + unsigned int irq_flags; +}; + +extern int __devinit __pata_platform_probe(struct device *dev, + struct resource *io_res, + struct resource *ctl_res, + struct resource *irq_res, + unsigned int ioport_shift, + int __pio_mask); + +extern int __devexit __pata_platform_remove(struct device *dev); + +#endif /* __LINUX_PATA_PLATFORM_H */ diff --git a/include/linux/pata_platform.h b/include/linux/pata_platform.h deleted file mode 100644 index 6a7a92d..0000000 --- a/include/linux/pata_platform.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __LINUX_PATA_PLATFORM_H -#define __LINUX_PATA_PLATFORM_H - -struct pata_platform_info { - /* - * I/O port shift, for platforms with ports that are - * constantly spaced and need larger than the 1-byte - * spacing used by ata_std_ports(). - */ - unsigned int ioport_shift; - /* - * Indicate platform specific irq types and initial - * IRQ flags when call request_irq() - */ - unsigned int irq_flags; -}; - -extern int __devinit __pata_platform_probe(struct device *dev, - struct resource *io_res, - struct resource *ctl_res, - struct resource *irq_res, - unsigned int ioport_shift, - int __pio_mask); - -extern int __devexit __pata_platform_remove(struct device *dev); - -#endif /* __LINUX_PATA_PLATFORM_H */ -- cgit v1.1 From f351b2d638c3cb0b95adde3549b7bfaf3f991dfa Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Fri, 1 Feb 2008 18:08:03 -0500 Subject: sata_mv: Support SoC controllers Marvell's Orion SoC includes SATA controllers based on Marvell's PCI-to-SATA 88SX controllers. This patch extends the libATA sata_mv driver to support those controllers. [edited to use linux/ata_platform.h -jg] Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 365 +++++++++++++++++++++++++++++++++++++------ include/linux/ata_platform.h | 13 +- 2 files changed, 330 insertions(+), 48 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3c1b5c90..1e97a33 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -71,6 +71,8 @@ #include #include #include +#include +#include #include #include #include @@ -179,6 +181,8 @@ enum { HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, HC_MAIN_IRQ_MASK_OFS = 0x1d64, + HC_SOC_MAIN_IRQ_CAUSE_OFS = 0x20020, + HC_SOC_MAIN_IRQ_MASK_OFS = 0x20024, PORT0_ERR = (1 << 0), /* shift by port # */ PORT0_DONE = (1 << 1), /* shift by port # */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ @@ -194,11 +198,13 @@ enum { TWSI_INT = (1 << 24), HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */ + HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */ HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | HC_MAIN_RSVD), HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | HC_MAIN_RSVD_5), + HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC), /* SATAHC registers */ HC_CFG_OFS = 0, @@ -368,6 +374,7 @@ enum chip_type { chip_608x, chip_6042, chip_7042, + chip_soc, }; /* Command ReQuest Block: 32B */ @@ -424,6 +431,10 @@ struct mv_host_priv { u32 hp_flags; struct mv_port_signal signal[8]; const struct mv_hw_ops *ops; + int n_ports; + void __iomem *base; + void __iomem *main_cause_reg_addr; + void __iomem *main_mask_reg_addr; u32 irq_cause_ofs; u32 irq_mask_ofs; u32 unmask_all_irqs; @@ -482,6 +493,15 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int n_hc); static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv_soc_enable_leds(struct mv_host_priv *hpriv, + void __iomem *mmio); +static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv_soc_reset_hc(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int n_hc); +static void mv_soc_reset_flash(struct mv_host_priv *hpriv, + void __iomem *mmio); +static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); @@ -661,6 +681,12 @@ static const struct ata_port_info mv_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, + { /* chip_soc */ + .flags = MV_COMMON_FLAGS | MV_FLAG_SOC, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &mv_iie_ops, + }, }; static const struct pci_device_id mv_pci_tbl[] = { @@ -711,6 +737,15 @@ static const struct mv_hw_ops mv6xxx_ops = { .reset_bus = mv_reset_pci_bus, }; +static const struct mv_hw_ops mv_soc_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv_soc_enable_leds, + .read_preamp = mv_soc_read_preamp, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + /* * Functions */ @@ -749,9 +784,15 @@ static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) (mv_hardport_from_port(port) * MV_PORT_REG_SZ); } +static inline void __iomem *mv_host_base(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + return hpriv->base; +} + static inline void __iomem *mv_ap_base(struct ata_port *ap) { - return mv_port_base(ap->host->iomap[MV_PRIMARY_BAR], ap->port_no); + return mv_port_base(mv_host_base(ap->host), ap->port_no); } static inline int mv_get_hc_count(unsigned long port_flags) @@ -1649,16 +1690,21 @@ static void mv_intr_edma(struct ata_port *ap) */ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) { - void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; void __iomem *hc_mmio = mv_hc_base(mmio, hc); u32 hc_irq_cause; - int port, port0; + int port, port0, last_port; if (hc == 0) port0 = 0; else port0 = MV_PORTS_PER_HC; + if (HAS_PCI(host)) + last_port = port0 + MV_PORTS_PER_HC; + else + last_port = port0 + hpriv->n_ports; /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (!hc_irq_cause) @@ -1669,7 +1715,7 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", hc, relevant, hc_irq_cause); - for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { + for (port = port0; port < port0 + last_port; port++) { struct ata_port *ap = host->ports[port]; struct mv_port_priv *pp = ap->private_data; int have_err_bits, hard_port, shift; @@ -1764,13 +1810,15 @@ static void mv_pci_error(struct ata_host *host, void __iomem *mmio) static irqreturn_t mv_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; + struct mv_host_priv *hpriv = host->private_data; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; + void __iomem *mmio = hpriv->base; u32 irq_stat, irq_mask; spin_lock(&host->lock); - irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - irq_mask = readl(mmio + HC_MAIN_IRQ_MASK_OFS); + + irq_stat = readl(hpriv->main_cause_reg_addr); + irq_mask = readl(hpriv->main_mask_reg_addr); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -1827,7 +1875,8 @@ static unsigned int mv5_scr_offset(unsigned int sc_reg_in) static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val) { - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->base; void __iomem *addr = mv5_phy_base(mmio, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); @@ -1840,7 +1889,8 @@ static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val) static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) { - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->base; void __iomem *addr = mv5_phy_base(mmio, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); @@ -2178,6 +2228,93 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, writel(m2, port_mmio + PHY_MODE2); } +/* TODO: use the generic LED interface to configure the SATA Presence */ +/* & Acitivy LEDs on the board */ +static void mv_soc_enable_leds(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + return; +} + +static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + + mv_channel_reset(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x101f, port_mmio + EDMA_CFG_OFS); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); +} + +#undef ZERO + +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + void __iomem *hc_mmio = mv_hc_base(mmio, 0); + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + +} + +#undef ZERO + +static int mv_soc_reset_hc(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int n_hc) +{ + unsigned int port; + + for (port = 0; port < hpriv->n_ports; port++) + mv_soc_reset_hc_port(hpriv, mmio, port); + + mv_soc_reset_one_hc(hpriv, mmio); + + return 0; +} + +static void mv_soc_reset_flash(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + return; +} + +static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) +{ + return; +} + static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no) { @@ -2342,7 +2479,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct mv_host_priv *hpriv = ap->host->private_data; - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + void __iomem *mmio = hpriv->base; mv_stop_dma(ap); @@ -2383,7 +2520,7 @@ static void mv_error_handler(struct ata_port *ap) static void mv_eh_freeze(struct ata_port *ap) { - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + struct mv_host_priv *hpriv = ap->host->private_data; unsigned int hc = (ap->port_no > 3) ? 1 : 0; u32 tmp, mask; unsigned int shift; @@ -2397,13 +2534,14 @@ static void mv_eh_freeze(struct ata_port *ap) mask = 0x3 << shift; /* disable assertion of portN err, done events */ - tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS); - writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS); + tmp = readl(hpriv->main_mask_reg_addr); + writelfl(tmp & ~mask, hpriv->main_mask_reg_addr); } static void mv_eh_thaw(struct ata_port *ap) { - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->base; unsigned int hc = (ap->port_no > 3) ? 1 : 0; void __iomem *hc_mmio = mv_hc_base(mmio, hc); void __iomem *port_mmio = mv_ap_base(ap); @@ -2430,8 +2568,8 @@ static void mv_eh_thaw(struct ata_port *ap) writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); /* enable assertion of portN err, done events */ - tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS); - writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS); + tmp = readl(hpriv->main_mask_reg_addr); + writelfl(tmp | mask, hpriv->main_mask_reg_addr); } /** @@ -2598,9 +2736,13 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; } break; + case chip_soc: + hpriv->ops = &mv_soc_ops; + hp_flags |= MV_HP_ERRATA_60X1C0; + break; default: - dev_printk(KERN_ERR, &pdev->dev, + dev_printk(KERN_ERR, host->dev, "BUG: invalid board index %u\n", board_idx); return 1; } @@ -2633,15 +2775,25 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) static int mv_init_host(struct ata_host *host, unsigned int board_idx) { int rc = 0, n_hc, port, hc; - void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; struct mv_host_priv *hpriv = host->private_data; - - /* global interrupt mask */ - writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); + void __iomem *mmio = hpriv->base; rc = mv_chip_id(host, board_idx); if (rc) - goto done; + goto done; + + if (HAS_PCI(host)) { + hpriv->main_cause_reg_addr = hpriv->base + + HC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_mask_reg_addr = hpriv->base + HC_MAIN_IRQ_MASK_OFS; + } else { + hpriv->main_cause_reg_addr = hpriv->base + + HC_SOC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_mask_reg_addr = hpriv->base + + HC_SOC_MAIN_IRQ_MASK_OFS; + } + /* global interrupt mask */ + writel(0, hpriv->main_mask_reg_addr); n_hc = mv_get_hc_count(host->ports[0]->flags); @@ -2672,13 +2824,15 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) for (port = 0; port < host->n_ports; port++) { struct ata_port *ap = host->ports[port]; void __iomem *port_mmio = mv_port_base(mmio, port); - unsigned int offset = port_mmio - mmio; mv_port_init(&ap->ioaddr, port_mmio); #ifdef CONFIG_PCI - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); + if (HAS_PCI(host)) { + unsigned int offset = port_mmio - mmio; + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); + } #endif } @@ -2694,35 +2848,141 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + if (HAS_PCI(host)) { + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + if (IS_GEN_I(hpriv)) + writelfl(~HC_MAIN_MASKED_IRQS_5, + hpriv->main_mask_reg_addr); + else + writelfl(~HC_MAIN_MASKED_IRQS, + hpriv->main_mask_reg_addr); + + VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " + "PCI int cause/mask=0x%08x/0x%08x\n", + readl(hpriv->main_cause_reg_addr), + readl(hpriv->main_mask_reg_addr), + readl(mmio + hpriv->irq_cause_ofs), + readl(mmio + hpriv->irq_mask_ofs)); + } else { + writelfl(~HC_MAIN_MASKED_IRQS_SOC, + hpriv->main_mask_reg_addr); + VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n", + readl(hpriv->main_cause_reg_addr), + readl(hpriv->main_mask_reg_addr)); + } +done: + return rc; +} - if (IS_GEN_I(hpriv)) - writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS); - else - writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); +/** + * mv_platform_probe - handle a positive probe of an soc Marvell + * host + * @pdev: platform device found + * + * LOCKING: + * Inherited from caller. + */ +static int mv_platform_probe(struct platform_device *pdev) +{ + static int printed_version; + const struct mv_sata_platform_data *mv_platform_data; + const struct ata_port_info *ppi[] = + { &mv_port_info[chip_soc], NULL }; + struct ata_host *host; + struct mv_host_priv *hpriv; + struct resource *res; + int n_ports, rc; - VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", - readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), - readl(mmio + HC_MAIN_IRQ_MASK_OFS), - readl(mmio + hpriv->irq_cause_ofs), - readl(mmio + hpriv->irq_mask_ofs)); + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); -done: - return rc; + /* + * Simple resource validation .. + */ + if (unlikely(pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the register base first + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -EINVAL; + + /* allocate host */ + mv_platform_data = pdev->dev.platform_data; + n_ports = mv_platform_data->n_ports; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + + if (!host || !hpriv) + return -ENOMEM; + host->private_data = hpriv; + hpriv->n_ports = n_ports; + + host->iomap = NULL; + hpriv->base = ioremap(res->start, res->end - res->start + 1); + hpriv->base -= MV_SATAHC0_REG_BASE; + + /* initialize adapter */ + rc = mv_init_host(host, chip_soc); + if (rc) + return rc; + + dev_printk(KERN_INFO, &pdev->dev, + "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH, + host->n_ports); + + return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, + IRQF_SHARED, &mv6_sht); +} + +/* + * + * mv_platform_remove - unplug a platform interface + * @pdev: platform device + * + * A platform bus SATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ +static int __devexit mv_platform_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + struct mv_host_priv *hpriv = host->private_data; + void __iomem *base = hpriv->base; + + ata_host_detach(host); + iounmap(base); + return 0; } +static struct platform_driver mv_platform_driver = { + .probe = mv_platform_probe, + .remove = __devexit_p(mv_platform_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + + #ifdef CONFIG_PCI -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int mv_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); + static struct pci_driver mv_pci_driver = { .name = DRV_NAME, .id_table = mv_pci_tbl, - .probe = mv_init_one, + .probe = mv_pci_init_one, .remove = ata_pci_remove_one, }; @@ -2828,14 +3088,15 @@ static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev) } /** - * mv_init_one - handle a positive probe of a Marvell host + * mv_pci_init_one - handle a positive probe of a PCI Marvell host * @pdev: PCI device found * @ent: PCI device ID entry for the matched host * * LOCKING: * Inherited from caller. */ -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int mv_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) { static int printed_version; unsigned int board_idx = (unsigned int)ent->driver_data; @@ -2855,6 +3116,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!host || !hpriv) return -ENOMEM; host->private_data = hpriv; + hpriv->n_ports = n_ports; /* acquire resources */ rc = pcim_enable_device(pdev); @@ -2867,6 +3129,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; host->iomap = pcim_iomap_table(pdev); + hpriv->base = host->iomap[MV_PRIMARY_BAR]; rc = pci_go_64(pdev); if (rc) @@ -2895,11 +3158,22 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } #endif +static int mv_platform_probe(struct platform_device *pdev); +static int __devexit mv_platform_remove(struct platform_device *pdev); + static int __init mv_init(void) { int rc = -ENODEV; #ifdef CONFIG_PCI rc = pci_register_driver(&mv_pci_driver); + if (rc < 0) + return rc; +#endif + rc = platform_driver_register(&mv_platform_driver); + +#ifdef CONFIG_PCI + if (rc < 0) + pci_unregister_driver(&mv_pci_driver); #endif return rc; } @@ -2909,6 +3183,7 @@ static void __exit mv_exit(void) #ifdef CONFIG_PCI pci_unregister_driver(&mv_pci_driver); #endif + platform_driver_unregister(&mv_platform_driver); } MODULE_AUTHOR("Brett Russ"); diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h index 6a7a92d..b856a2a 100644 --- a/include/linux/ata_platform.h +++ b/include/linux/ata_platform.h @@ -1,5 +1,5 @@ -#ifndef __LINUX_PATA_PLATFORM_H -#define __LINUX_PATA_PLATFORM_H +#ifndef __LINUX_ATA_PLATFORM_H +#define __LINUX_ATA_PLATFORM_H struct pata_platform_info { /* @@ -24,4 +24,11 @@ extern int __devinit __pata_platform_probe(struct device *dev, extern int __devexit __pata_platform_remove(struct device *dev); -#endif /* __LINUX_PATA_PLATFORM_H */ +/* + * Marvell SATA private data + */ +struct mv_sata_platform_data { + int n_ports; /* number of sata ports */ +}; + +#endif /* __LINUX_ATA_PLATFORM_H */ -- cgit v1.1 From 837f5f8fb98d4357d49e9631c9ee2815f3c328ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 6 Feb 2008 15:13:51 +0900 Subject: ahci: fix CAP.NP and PI handling AHCI uses CAP.NP to indicate the number of ports and PI to tell which ports are enabled. The only requirement is that the number of ports indicated by CAP.NP should equal or be higher than the number of enabled ports in PI. CAP.NP and PI carry duplicate information and there have been some interesting cases. Some early AHCI controllers didn't set PI at all and just implement from port 0 to CAP.NP. An ICH8 board which wired four out of six available ports had 3 (4 ports) for CAP.NP and 0x33 for PI. While ESB2 has less bits set in PI than the value in CAP.NP. Till now, ahci driver assumed that PI is invalid if it doesn't match CAP.NP exactly. This violates AHCI standard and the driver ends up accessing unmimplemented ports on ESB2. This patch updates CAP.NP and PI handling such that PI can have less number of bits set than indicated in CAP.NP and the highest port is determined as the maximum port of what CAP.NP and PI indicate. Signed-off-by: Tejun Heo Cc: Jan Beulich Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 27c8d56..29e71bd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -679,24 +679,20 @@ static void ahci_save_initial_config(struct pci_dev *pdev, /* cross check port_map and cap.n_ports */ if (port_map) { - u32 tmp_port_map = port_map; - int n_ports = ahci_nr_ports(cap); + int map_ports = 0; - for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) { - if (tmp_port_map & (1 << i)) { - n_ports--; - tmp_port_map &= ~(1 << i); - } - } + for (i = 0; i < AHCI_MAX_PORTS; i++) + if (port_map & (1 << i)) + map_ports++; - /* If n_ports and port_map are inconsistent, whine and - * clear port_map and let it be generated from n_ports. + /* If PI has more ports than n_ports, whine, clear + * port_map and let it be generated from n_ports. */ - if (n_ports || tmp_port_map) { + if (map_ports > ahci_nr_ports(cap)) { dev_printk(KERN_WARNING, &pdev->dev, - "nr_ports (%u) and implemented port map " - "(0x%x) don't match, using nr_ports\n", - ahci_nr_ports(cap), port_map); + "implemented port map (0x%x) contains more " + "ports than nr_ports (%u), using nr_ports\n", + port_map, ahci_nr_ports(cap)); port_map = 0; } } @@ -2201,7 +2197,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct ata_host *host; - int i, rc; + int n_ports, i, rc; VPRINTK("ENTER\n"); @@ -2255,7 +2251,14 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; - host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map)); + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; host->iomap = pcim_iomap_table(pdev); -- cgit v1.1 From 37198e3051b63d3184886e9bb8235e7578e82628 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 5 Feb 2008 14:06:27 +0900 Subject: libata: kill now unused n_iter and fix sata_fsl qc->n_iter was used for libata's own sg walking before sg chaining replaced it. During conversion, the field and its usage in sata_fsl were left behind. Kill the filed and update sata_fsl. tj: This was part of James's libata-use-block-layer-padding patch. Separated out by me. Signed-off-by: James Bottomley Signed-off-by: Tejun Heo Cc: Li Yang Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 4 ++-- include/linux/libata.h | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 922d7b2..efcb66b6 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -355,8 +355,8 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, ata_port_printk(qc->ap, KERN_ERR, "s/g len unaligned : 0x%x\n", sg_len); - if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) && - (qc->n_iter + 1 != qc->n_elem)) { + if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) && + sg_next(sg) != NULL) { VPRINTK("setting indirect prde\n"); prd_ptr_to_indirect_ext = prd; prd->dba = cpu_to_le32(indirect_ext_segment_paddr); diff --git a/include/linux/libata.h b/include/linux/libata.h index 4374c42..bc5a8d0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -457,7 +457,6 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; - unsigned int n_iter; unsigned int mapped_n_elem; int dma_dir; @@ -1367,7 +1366,6 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->nbytes = qc->raw_nbytes = qc->curbytes = 0; qc->n_elem = 0; qc->mapped_n_elem = 0; - qc->n_iter = 0; qc->err_mask = 0; qc->pad_len = 0; qc->last_sg = NULL; -- cgit v1.1 From 8d8b60046d6a2328ca4b9031b4948084f775f607 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 4 Feb 2008 23:43:44 -0800 Subject: ata: drivers/ata/sata_mv.c needs dmapool.h mips: drivers/ata/sata_mv.c: In function `mv_port_free_dma_mem': drivers/ata/sata_mv.c:1080: error: implicit declaration of function `dma_pool_free' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 1e97a33..080b836 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -69,6 +69,7 @@ #include #include #include +#include #include #include #include -- cgit v1.1 From 8959d300a79c1b70526cdf9e00485262cf8d979f Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Mon, 4 Feb 2008 19:39:02 -0600 Subject: sata_nv: fix ATAPI issues with memory over 4GB (v7) This fixes some problems with ATAPI devices on nForce4 controllers in ADMA mode on systems with memory located above 4GB. We need to delay setting the 64-bit DMA mask until the PRD table and padding buffer are allocated so that they don't get allocated above 4GB and break legacy mode (which is needed for ATAPI devices). Also, if either port is in ATAPI mode we need to set the DMA mask for the PCI device to 32-bit to ensure that the IOMMU code properly bounces requests above 4GB, as it appears setting the bounce limit does not guarantee that we will not try to map requests above this point. Reported to fix https://bugzilla.redhat.com/show_bug.cgi?id=351451 Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 78 ++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 65 insertions(+), 13 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index bfe92a4..ed5473b 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -247,6 +247,7 @@ struct nv_adma_port_priv { void __iomem *ctl_block; void __iomem *gen_block; void __iomem *notifier_clear_block; + u64 adma_dma_mask; u8 flags; int last_issue_ncq; }; @@ -715,9 +716,10 @@ static int nv_adma_slave_config(struct scsi_device *sdev) { struct ata_port *ap = ata_shost_to_port(sdev->host); struct nv_adma_port_priv *pp = ap->private_data; + struct nv_adma_port_priv *port0, *port1; + struct scsi_device *sdev0, *sdev1; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u64 bounce_limit; - unsigned long segment_boundary; + unsigned long segment_boundary, flags; unsigned short sg_tablesize; int rc; int adma_enable; @@ -729,6 +731,8 @@ static int nv_adma_slave_config(struct scsi_device *sdev) /* Not a proper libata device, ignore */ return rc; + spin_lock_irqsave(ap->lock, flags); + if (ap->link.device[sdev->id].class == ATA_DEV_ATAPI) { /* * NVIDIA reports that ADMA mode does not support ATAPI commands. @@ -737,7 +741,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) * Restrict DMA parameters as required by the legacy interface * when an ATAPI device is connected. */ - bounce_limit = ATA_DMA_MASK; segment_boundary = ATA_DMA_BOUNDARY; /* Subtract 1 since an extra entry may be needed for padding, see libata-scsi.c */ @@ -748,7 +751,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) adma_enable = 0; nv_adma_register_mode(ap); } else { - bounce_limit = *ap->dev->dma_mask; segment_boundary = NV_ADMA_DMA_BOUNDARY; sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN; adma_enable = 1; @@ -774,12 +776,49 @@ static int nv_adma_slave_config(struct scsi_device *sdev) if (current_reg != new_reg) pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg); - blk_queue_bounce_limit(sdev->request_queue, bounce_limit); + port0 = ap->host->ports[0]->private_data; + port1 = ap->host->ports[1]->private_data; + sdev0 = ap->host->ports[0]->link.device[0].sdev; + sdev1 = ap->host->ports[1]->link.device[0].sdev; + if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || + (port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) { + /** We have to set the DMA mask to 32-bit if either port is in + ATAPI mode, since they are on the same PCI device which is + used for DMA mapping. If we set the mask we also need to set + the bounce limit on both ports to ensure that the block + layer doesn't feed addresses that cause DMA mapping to + choke. If either SCSI device is not allocated yet, it's OK + since that port will discover its correct setting when it + does get allocated. + Note: Setting 32-bit mask should not fail. */ + if (sdev0) + blk_queue_bounce_limit(sdev0->request_queue, + ATA_DMA_MASK); + if (sdev1) + blk_queue_bounce_limit(sdev1->request_queue, + ATA_DMA_MASK); + + pci_set_dma_mask(pdev, ATA_DMA_MASK); + } else { + /** This shouldn't fail as it was set to this value before */ + pci_set_dma_mask(pdev, pp->adma_dma_mask); + if (sdev0) + blk_queue_bounce_limit(sdev0->request_queue, + pp->adma_dma_mask); + if (sdev1) + blk_queue_bounce_limit(sdev1->request_queue, + pp->adma_dma_mask); + } + blk_queue_segment_boundary(sdev->request_queue, segment_boundary); blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize); ata_port_printk(ap, KERN_INFO, - "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n", - (unsigned long long)bounce_limit, segment_boundary, sg_tablesize); + "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n", + (unsigned long long)*ap->host->dev->dma_mask, + segment_boundary, sg_tablesize); + + spin_unlock_irqrestore(ap->lock, flags); + return rc; } @@ -1140,10 +1179,20 @@ static int nv_adma_port_start(struct ata_port *ap) void *mem; dma_addr_t mem_dma; void __iomem *mmio; + struct pci_dev *pdev = to_pci_dev(dev); u16 tmp; VPRINTK("ENTER\n"); + /* Ensure DMA mask is set to 32-bit before allocating legacy PRD and + pad buffers */ + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) + return rc; + rc = ata_port_start(ap); if (rc) return rc; @@ -1159,6 +1208,15 @@ static int nv_adma_port_start(struct ata_port *ap) pp->notifier_clear_block = pp->gen_block + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no); + /* Now that the legacy PRD and padding buffer are allocated we can + safely raise the DMA mask to allocate the CPB/APRD table. + These are allowed to fail since we store the value that ends up + being used to set as the bounce limit in slave_config later if + needed. */ + pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + pp->adma_dma_mask = *dev->dma_mask; + mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); if (!mem) @@ -2417,12 +2475,6 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->type = type; host->private_data = hpriv; - /* set 64bit dma masks, may fail */ - if (type == ADMA) { - if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) - pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - } - /* request and iomap NV_MMIO_BAR */ rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME); if (rc) -- cgit v1.1 From 223f95f76d6e946de0cb7149d7738e8b73f1e564 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Mon, 4 Feb 2008 12:24:21 -0600 Subject: libata-core: unblacklist HITACHI drives The HITACHI HDS7250SASUN500G and HITACHI HDS7225SBSUN250 drives do not need to be blacklisted, the NCQ problem has been resolved with the "sata_nv: fix for completion handling" patch. Signed-off-by David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 361cf50..3011919 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4154,8 +4154,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* NCQ is broken */ { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, - { "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ }, - { "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ }, { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, -- cgit v1.1 From 4f743d1d2224ee646b6b6d1d90f3d9d625dd9ab7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alejandro=20Riveira=20Fern=C3=A1ndez?= Date: Mon, 4 Feb 2008 15:19:52 +0100 Subject: sata_via.c: Remove missleading comment. Maybe for the trivial tree... sata_via.c has PATA support since: d73f30e1c9a9af14757fa5bf4014343926047156 sata_via: PATA support AFAICS so the TODO list is no longer true. Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 3ef072ff..30caa03 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -30,8 +30,6 @@ * Hardware documentation available under NDA. * * - * To-do list: - * - VT6421 PATA support * */ -- cgit v1.1 From bc5468f52b785ffa1fe0ea289baec2c51384d436 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 30 Jan 2008 22:02:02 +0200 Subject: ata_piix.c:piix_init_one() must be __devinit This patch fixes the following section mismatches: <-- snip --> ... WARNING: drivers/ata/built-in.o(.text+0x15072): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_sata_map() WARNING: drivers/ata/built-in.o(.text+0x150dd): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_pcs() WARNING: drivers/ata/built-in.o(.text+0x150e5): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_sidpr() WARNING: drivers/ata/built-in.o(.text+0x15107): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_check_450nx_errata() ... <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 4b99ed0..9c2515f 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1603,7 +1603,8 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) * Zero on success, or -ERRNO value. */ -static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit piix_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) { static int printed_version; struct device *dev = &pdev->dev; -- cgit v1.1