From 0a79a0c011cb291675e3b80760a452fcba5c59d9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 4 Dec 2014 10:27:20 +0200 Subject: iwlwifi: mvm: clear IN_HW_RESTART flag on stop() On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 31a5b3f..e880f9d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1004,8 +1004,13 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) { lockdep_assert_held(&mvm->mutex); - /* disallow low power states when the FW is down */ - iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); + /* + * Disallow low power states when the FW is down by taking + * the UCODE_DOWN ref. in case of ongoing hw restart the + * ref is already taken, so don't take it again. + */ + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); /* async_handlers_wk is now blocked */ @@ -1023,6 +1028,12 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) /* the fw is stopped, the aux sta is dead: clean up driver state */ iwl_mvm_del_aux_sta(mvm); + /* + * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete() + * won't be called in this case). + */ + clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + mvm->ucode_loaded = false; } -- cgit v1.1 From 03d6c3b0fa4f5f0379cede079ec828a6c999fe43 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 10:39:07 +0200 Subject: iwlwifi: pcie: re-ACK all interrupts after device reset When we reset the device, the CSR_INT gets cleared as well as CSR_INT_MASK. Meaning that we shouldn't get any interrupt but, due to a hardware bug, recent devices will keep sending interrupts. This leads to an interrupt storm while stopping the device. The way to fix this is to ACK all the interrupts after the device is reset so that the value of CSR_INT will stay 0xffffffff. Fixes: 522713c81e4e ("iwlwifi: pcie: properly reset the device") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 5d79a1f..d151af3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1012,16 +1012,21 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) /* Stop the device, and put it in low power state */ iwl_pcie_apm_stop(trans); - /* Upon stop, the APM issues an interrupt if HW RF kill is set. - * Clean again the interrupt here + /* stop and reset the on-board processor */ + iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + udelay(20); + + /* + * Upon stop, the APM issues an interrupt if HW RF kill is set. + * This is a bug in certain verions of the hardware. + * Certain devices also keep sending HW RF kill interrupt all + * the time, unless the interrupt is ACKed even if the interrupt + * should be masked. Re-ACK all the interrupts here. */ spin_lock(&trans_pcie->irq_lock); iwl_disable_interrupts(trans); spin_unlock(&trans_pcie->irq_lock); - /* stop and reset the on-board processor */ - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - udelay(20); /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); -- cgit v1.1 From 31a5a09c1c5c888181e86a951a9a6c3ec27f7642 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 08:25:44 +0200 Subject: iwlwifi: don't double free a pointer if no FW was found In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 38de151..850b85a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1323,10 +1323,10 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) try_again: /* try next, if any */ - kfree(pieces); release_firmware(ucode_raw); if (iwl_request_firmware(drv, false)) goto out_unbind; + kfree(pieces); return; out_free_fw: -- cgit v1.1 From 55fd1ce820f461b77919a1997ba8285652219024 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 2 Dec 2014 22:09:55 +0200 Subject: iwlwifi: add new device IDs for 3165 A few device IDs were added, reflect this change in the driver. Cc; [3.13+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/drv.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3ee8e38..2f0c4b1 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -367,7 +367,11 @@ static const struct pci_device_id iwl_hw_card_ids[] = { /* 3165 Series */ {IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4012, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4110, iwl3165_2ac_cfg)}, {IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4410, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4510, iwl3165_2ac_cfg)}, /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, -- cgit v1.1 From baa21e834941ee5fbe4bd421c871f7c0c5f9a086 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 2 Dec 2014 14:28:45 +0200 Subject: iwlwifi: pcie: limit fw chunk sizes given to fh New FW has chunks that are larger than the size limit of the FH's DMA. To make sure we don't crash it - actively limit the max size of each chunk. Signed-off-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fh.h | 1 + drivers/net/wireless/iwlwifi/pcie/trans.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 9564ae1..1f7f15e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -310,6 +310,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH_MEM_TB_MAX_LENGTH (0x00020000) /* TFDB Area - TFDs buffer table */ #define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index d151af3..523fe0c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -614,7 +614,7 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num, { u8 *v_addr; dma_addr_t p_addr; - u32 offset, chunk_sz = section->len; + u32 offset, chunk_sz = min_t(u32, FH_MEM_TB_MAX_LENGTH, section->len); int ret = 0; IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n", -- cgit v1.1 From 004fa5ed08cc5d3188db42c05d6b80feaae004c2 Mon Sep 17 00:00:00 2001 From: Jukka Rissanen Date: Wed, 10 Dec 2014 14:19:53 +0200 Subject: Bluetooth: 6lowpan: Do not free skb when packet is dropped If we need to drop the message because of some error in the compression etc, then do not free the skb as that is done automatically in other part of networking stack. Signed-off-by: Jukka Rissanen Signed-off-by: Marcel Holtmann --- net/bluetooth/6lowpan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 76617be..c989253 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -390,7 +390,6 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev, drop: dev->stats.rx_dropped++; - kfree_skb(skb); return NET_RX_DROP; } -- cgit v1.1 From 51bda2bca53b265715ca1852528f38dc67429d9a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 19 Dec 2014 06:20:57 +0000 Subject: Bluetooth: hidp_connection_add() unsafe use of l2cap_pi() it's OK after we'd verified the sockets, but not before that. Signed-off-by: Al Viro Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index cc25d0b..07348e1 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -1314,13 +1314,14 @@ int hidp_connection_add(struct hidp_connadd_req *req, { struct hidp_session *session; struct l2cap_conn *conn; - struct l2cap_chan *chan = l2cap_pi(ctrl_sock->sk)->chan; + struct l2cap_chan *chan; int ret; ret = hidp_verify_sockets(ctrl_sock, intr_sock); if (ret) return ret; + chan = l2cap_pi(ctrl_sock->sk)->chan; conn = NULL; l2cap_chan_lock(chan); if (chan->conn) -- cgit v1.1 From 96c26653ce65bf84f3212f8b00d4316c1efcbf4c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 19 Dec 2014 06:20:58 +0000 Subject: Bluetooth: cmtp: cmtp_add_connection() should verify that it's dealing with l2cap socket ... rather than relying on ciptool(8) never passing it anything else. Give it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops, trying to evaluate &l2cap_pi(sock->sk)->chan->dst... Signed-off-by: Al Viro Signed-off-by: Marcel Holtmann --- net/bluetooth/cmtp/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c index 67fe5e8..278a194 100644 --- a/net/bluetooth/cmtp/core.c +++ b/net/bluetooth/cmtp/core.c @@ -334,6 +334,9 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock) BT_DBG(""); + if (!l2cap_is_socket(sock)) + return -EBADFD; + session = kzalloc(sizeof(struct cmtp_session), GFP_KERNEL); if (!session) return -ENOMEM; -- cgit v1.1 From 71bb99a02b32b4cc4265118e85f6035ca72923f0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 19 Dec 2014 06:20:59 +0000 Subject: Bluetooth: bnep: bnep_add_connection() should verify that it's dealing with l2cap socket same story as cmtp Signed-off-by: Al Viro Signed-off-by: Marcel Holtmann --- net/bluetooth/bnep/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c index 85bcc21..ce82722d 100644 --- a/net/bluetooth/bnep/core.c +++ b/net/bluetooth/bnep/core.c @@ -533,6 +533,9 @@ int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock) BT_DBG(""); + if (!l2cap_is_socket(sock)) + return -EBADFD; + baswap((void *) dst, &l2cap_pi(sock->sk)->chan->dst); baswap((void *) src, &l2cap_pi(sock->sk)->chan->src); -- cgit v1.1 From 4f2ff8ef9eab32e6bc01c71bb539fc68d0917f59 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 19 Dec 2014 13:19:35 +0800 Subject: sunvnet: fix a memory leak in vnet_handle_offloads when skb_gso_segment returns error, the original skb should be freed Signed-off-by: Li RongQing Acked-by: David L Stevens Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 45c408e..d2835bf 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1201,6 +1201,7 @@ static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb) segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO); if (IS_ERR(segs)) { dev->stats.tx_dropped++; + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.1 From 17e96834fd35997ca7cdfbf15413bcd5a36ad448 Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan <_govind@gmx.com> Date: Thu, 18 Dec 2014 15:58:42 +0530 Subject: enic: fix rx skb checksum Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: [] dump_stack+0x19/0x1b kernel: [] netdev_rx_csum_fault+0x3a/0x40 kernel: [] __skb_checksum_complete_head+0x62/0x70 kernel: [] __skb_checksum_complete+0x11/0x20 kernel: [] nf_ip_checksum+0xcc/0x100 kernel: [] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [] ? netif_rx+0xb9/0x1d0 kernel: [] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [] nf_iterate+0xaa/0xc0 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] nf_hook_slow+0x84/0x140 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc Cc: Stefan Assmann Reported-by: Sunil Choudhary Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 868d0f6..705f334 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1060,10 +1060,14 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); } - if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) { - skb->csum = htons(checksum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + /* Hardware does not provide whole packet checksum. It only + * provides pseudo checksum. Since hw validates the packet + * checksum but not provide us the checksum value. use + * CHECSUM_UNNECESSARY. + */ + if ((netdev->features & NETIF_F_RXCSUM) && tcp_udp_csum_ok && + ipv4_csum_ok) + skb->ip_summed = CHECKSUM_UNNECESSARY; if (vlan_stripped) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci); -- cgit v1.1 From da413eec729dae5dcb150e2eb34c5e7e5e4e1b49 Mon Sep 17 00:00:00 2001 From: Dan Collins Date: Fri, 19 Dec 2014 16:49:25 +1300 Subject: packet: Fixed TPACKET V3 to signal poll when block is closed rather than every packet Make TPACKET_V3 signal poll when block is closed rather than for every packet. Side effect is that poll will be signaled when block retire timer expires which didn't previously happen. Issue was visible when sending packets at a very low frequency such that all blocks are retired before packets are received by TPACKET_V3. This caused avoidable packet loss. The fix ensures that the signal is sent when blocks are closed which covers the normal path where the block is filled as well as the path where the timer expires. The case where a block is filled without moving to the next block (ie. all blocks are full) will still cause poll to be signaled. Signed-off-by: Dan Collins Signed-off-by: David S. Miller --- net/packet/af_packet.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index e52a447..6880f34a 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -785,6 +785,7 @@ static void prb_close_block(struct tpacket_kbdq_core *pkc1, struct tpacket3_hdr *last_pkt; struct tpacket_hdr_v1 *h1 = &pbd1->hdr.bh1; + struct sock *sk = &po->sk; if (po->stats.stats3.tp_drops) status |= TP_STATUS_LOSING; @@ -809,6 +810,8 @@ static void prb_close_block(struct tpacket_kbdq_core *pkc1, /* Flush the block */ prb_flush_block(pkc1, pbd1, status); + sk->sk_data_ready(sk); + pkc1->kactive_blk_num = GET_NEXT_PRB_BLK_NUM(pkc1); } @@ -2052,12 +2055,12 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, smp_wmb(); #endif - if (po->tp_version <= TPACKET_V2) + if (po->tp_version <= TPACKET_V2) { __packet_set_status(po, h.raw, status); - else + sk->sk_data_ready(sk); + } else { prb_clear_blk_fill_status(&po->rx_ring); - - sk->sk_data_ready(sk); + } drop_n_restore: if (skb_head != skb->data && skb_shared(skb)) { -- cgit v1.1 From fe13192911507c49002fc4882ef11f75f529a010 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 19 Dec 2014 22:38:18 +0800 Subject: stmmac: Don't init ptp again when resume from suspend/hibernation Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend() doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call stmmac_init_ptp(). This patch also fix a "scheduling while atomic" problem when resume from suspend/hibernation. Because stmmac_init_ptp() will trigger scheduling while stmmac_resume() hold a spinlock. Callgraph of "scheduling while atomic": stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() --> stmmac_ptp_register() --> ptp_clock_register() --> device_create() --> device_create_groups_vargs() --> device_add() --> devtmpfs_create_node() --> wait_for_common() --> schedule_timeout() --> __schedule() Signed-off-by: Huacai Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 118a427..8c6b7c1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1671,7 +1671,7 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int stmmac_hw_setup(struct net_device *dev) +static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) { struct stmmac_priv *priv = netdev_priv(dev); int ret; @@ -1708,9 +1708,11 @@ static int stmmac_hw_setup(struct net_device *dev) stmmac_mmc_setup(priv); - ret = stmmac_init_ptp(priv); - if (ret && ret != -EOPNOTSUPP) - pr_warn("%s: failed PTP initialisation\n", __func__); + if (init_ptp) { + ret = stmmac_init_ptp(priv); + if (ret && ret != -EOPNOTSUPP) + pr_warn("%s: failed PTP initialisation\n", __func__); + } #ifdef CONFIG_DEBUG_FS ret = stmmac_init_fs(dev); @@ -1787,7 +1789,7 @@ static int stmmac_open(struct net_device *dev) goto init_error; } - ret = stmmac_hw_setup(dev); + ret = stmmac_hw_setup(dev, true); if (ret < 0) { pr_err("%s: Hw setup failed\n", __func__); goto init_error; @@ -3036,7 +3038,7 @@ int stmmac_resume(struct net_device *ndev) netif_device_attach(ndev); init_dma_desc_rings(ndev, GFP_ATOMIC); - stmmac_hw_setup(ndev); + stmmac_hw_setup(ndev, false); stmmac_init_tx_coalesce(priv); napi_enable(&priv->napi); -- cgit v1.1 From 8acdf999accfd95093db17f33a58429a38782060 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 20 Dec 2014 11:23:27 +1100 Subject: virtio_net: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b8bd719..5ca9771 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -760,7 +760,6 @@ static int virtnet_poll(struct napi_struct *napi, int budget) container_of(napi, struct receive_queue, napi); unsigned int r, received = 0; -again: received += virtnet_receive(rq, budget - received); /* Out of packets? */ @@ -771,7 +770,6 @@ again: napi_schedule_prep(napi)) { virtqueue_disable_cb(rq->vq); __napi_schedule(napi); - goto again; } } -- cgit v1.1 From c51ed18257e731e15541324cd58bd3761d9d3b1c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 19 Dec 2014 18:25:18 -0800 Subject: hyperv: Fix some variable name typos in send-buffer init/revoke The changed names are union fields with the same size, so the existing code still works. But, we now update these variables to the correct names. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 1 + drivers/net/hyperv/netvsc.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 2f48f79..384ca4f 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -590,6 +590,7 @@ struct nvsp_message { #define NETVSC_RECEIVE_BUFFER_ID 0xcafe +#define NETVSC_SEND_BUFFER_ID 0 #define NETVSC_PACKET_SIZE 4096 diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index dd867e6..9f49c01 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -161,8 +161,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) /* Deal with the send buffer we may have setup. * If we got a send section size, it means we received a - * SendsendBufferComplete msg (ie sent - * NvspMessage1TypeSendReceiveBuffer msg) therefore, we need + * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent + * NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need * to send a revoke msg here */ if (net_device->send_section_size) { @@ -172,7 +172,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) revoke_packet->hdr.msg_type = NVSP_MSG1_TYPE_REVOKE_SEND_BUF; - revoke_packet->msg.v1_msg.revoke_recv_buf.id = 0; + revoke_packet->msg.v1_msg.revoke_send_buf.id = + NETVSC_SEND_BUFFER_ID; ret = vmbus_sendpacket(net_device->dev->channel, revoke_packet, @@ -204,7 +205,7 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) net_device->send_buf_gpadl_handle = 0; } if (net_device->send_buf) { - /* Free up the receive buffer */ + /* Free up the send buffer */ vfree(net_device->send_buf); net_device->send_buf = NULL; } @@ -339,9 +340,9 @@ static int netvsc_init_buf(struct hv_device *device) init_packet = &net_device->channel_init_pkt; memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF; - init_packet->msg.v1_msg.send_recv_buf.gpadl_handle = + init_packet->msg.v1_msg.send_send_buf.gpadl_handle = net_device->send_buf_gpadl_handle; - init_packet->msg.v1_msg.send_recv_buf.id = 0; + init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID; /* Send the gpadl notification request */ ret = vmbus_sendpacket(device->channel, init_packet, @@ -364,7 +365,7 @@ static int netvsc_init_buf(struct hv_device *device) netdev_err(ndev, "Unable to complete send buffer " "initialization with NetVsp - status %d\n", init_packet->msg.v1_msg. - send_recv_buf_complete.status); + send_send_buf_complete.status); ret = -EINVAL; goto cleanup; } -- cgit v1.1 From 6d08acd2d32e3e877579315dc3202d7a5f336d98 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sat, 20 Dec 2014 12:15:49 -0800 Subject: in6: fix conflict with glibc Resolve conflicts between glibc definition of IPV6 socket options and those defined in Linux headers. Looks like earlier efforts to solve this did not cover all the definitions. It resolves warnings during iproute2 build. Please consider for stable as well. Signed-off-by: Stephen Hemminger Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/uapi/linux/in6.h | 3 ++- include/uapi/linux/libc-compat.h | 3 +++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 74a2a17..79b12b0 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -149,7 +149,7 @@ struct in6_flowlabel_req { /* * IPV6 socket options */ - +#if __UAPI_DEF_IPV6_OPTIONS #define IPV6_ADDRFORM 1 #define IPV6_2292PKTINFO 2 #define IPV6_2292HOPOPTS 3 @@ -196,6 +196,7 @@ struct in6_flowlabel_req { #define IPV6_IPSEC_POLICY 34 #define IPV6_XFRM_POLICY 35 +#endif /* * Multicast: diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h index c140620..e28807a 100644 --- a/include/uapi/linux/libc-compat.h +++ b/include/uapi/linux/libc-compat.h @@ -69,6 +69,7 @@ #define __UAPI_DEF_SOCKADDR_IN6 0 #define __UAPI_DEF_IPV6_MREQ 0 #define __UAPI_DEF_IPPROTO_V6 0 +#define __UAPI_DEF_IPV6_OPTIONS 0 #else @@ -82,6 +83,7 @@ #define __UAPI_DEF_SOCKADDR_IN6 1 #define __UAPI_DEF_IPV6_MREQ 1 #define __UAPI_DEF_IPPROTO_V6 1 +#define __UAPI_DEF_IPV6_OPTIONS 1 #endif /* _NETINET_IN_H */ @@ -103,6 +105,7 @@ #define __UAPI_DEF_SOCKADDR_IN6 1 #define __UAPI_DEF_IPV6_MREQ 1 #define __UAPI_DEF_IPPROTO_V6 1 +#define __UAPI_DEF_IPV6_OPTIONS 1 /* Definitions for xattr.h */ #define __UAPI_DEF_XATTR 1 -- cgit v1.1 From 05b0aa579397b734f127af58e401a30784a1e315 Mon Sep 17 00:00:00 2001 From: Prashant Sreedharan Date: Sat, 20 Dec 2014 12:16:17 -0800 Subject: tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland Reported-by: Marcelo Ricardo Leitner Signed-off-by: Prashant Sreedharan Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bb48a61..553dcd8 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev, goto err_out_apeunmap; } - /* - * Reset chip in case UNDI or EFI driver did not shutdown - * DMA self test will enable WDMAC and we'll see (spurious) - * pending DMA on the PCI bus at that point. - */ - if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || - (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - } - - err = tg3_test_dma(tp); - if (err) { - dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); - goto err_out_apeunmap; - } - intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW; rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW; sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW; @@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev, sndmbx += 0xc; } + /* + * Reset chip in case UNDI or EFI driver did not shutdown + * DMA self test will enable WDMAC and we'll see (spurious) + * pending DMA on the PCI bus at that point. + */ + if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || + (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + } + + err = tg3_test_dma(tp); + if (err) { + dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); + goto err_out_apeunmap; + } + tg3_init_coal(tp); pci_set_drvdata(pdev, dev); -- cgit v1.1 From 62633b8adb1b4c675b6f1bedc44eaa9062b02301 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Sun, 21 Dec 2014 18:41:38 +0100 Subject: net: ethernet: micrel: ksz884x.c: Remove unused function Remove the function port_cfg_dis_learn() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ksz884x.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index f1ebed6c..2fa6ae0 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -2303,12 +2303,6 @@ static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p) /* Spanning Tree */ -static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set) -{ - port_cfg(hw, p, - KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set); -} - static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set) { port_cfg(hw, p, -- cgit v1.1 From f3ba9d490d6e9371bbda5f45a22b6b3313125f97 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Sun, 21 Dec 2014 20:27:39 +0100 Subject: net: s6gmac: remove driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The s6000 Xtensa support has been removed from the kernel in 4006e565e1500db4. There are no other chips using this driver. While the Mentor/Alcatel PE-MCXMAC IP core is also used in other designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere ET-1310, Netlogic XLR/XLS), none of these use this driver as it heavily depends on the s6000 DMA engine. In fact, there is no code sharing across any of the aforementioned devices. Signed-off-by: Daniel Glöckner Signed-off-by: David S. Miller --- drivers/net/ethernet/Kconfig | 12 - drivers/net/ethernet/Makefile | 1 - drivers/net/ethernet/s6gmac.c | 1058 ----------------------------------------- 3 files changed, 1071 deletions(-) delete mode 100644 drivers/net/ethernet/s6gmac.c diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index df76050..eadcb05 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -156,18 +156,6 @@ source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" - -config S6GMAC - tristate "S6105 GMAC ethernet support" - depends on XTENSA_VARIANT_S6000 - select PHYLIB - ---help--- - This driver supports the on chip ethernet device on the - S6105 xtensa processor. - - To compile this driver as a module, choose M here. The module - will be called s6gmac. - source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/silan/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index bf56f8b..1367afc 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -66,7 +66,6 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/ -obj-$(CONFIG_S6GMAC) += s6gmac.o obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/ obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c deleted file mode 100644 index f537cbe..0000000 --- a/drivers/net/ethernet/s6gmac.c +++ /dev/null @@ -1,1058 +0,0 @@ -/* - * Ethernet driver for S6105 on chip network device - * (c)2008 emlix GmbH http://www.emlix.com - * Authors: Oskar Schirmer - * Daniel Gloeckner - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "s6gmac" -#define DRV_PRMT DRV_NAME ": " - - -/* register declarations */ - -#define S6_GMAC_MACCONF1 0x000 -#define S6_GMAC_MACCONF1_TXENA 0 -#define S6_GMAC_MACCONF1_SYNCTX 1 -#define S6_GMAC_MACCONF1_RXENA 2 -#define S6_GMAC_MACCONF1_SYNCRX 3 -#define S6_GMAC_MACCONF1_TXFLOWCTRL 4 -#define S6_GMAC_MACCONF1_RXFLOWCTRL 5 -#define S6_GMAC_MACCONF1_LOOPBACK 8 -#define S6_GMAC_MACCONF1_RESTXFUNC 16 -#define S6_GMAC_MACCONF1_RESRXFUNC 17 -#define S6_GMAC_MACCONF1_RESTXMACCTRL 18 -#define S6_GMAC_MACCONF1_RESRXMACCTRL 19 -#define S6_GMAC_MACCONF1_SIMULRES 30 -#define S6_GMAC_MACCONF1_SOFTRES 31 -#define S6_GMAC_MACCONF2 0x004 -#define S6_GMAC_MACCONF2_FULL 0 -#define S6_GMAC_MACCONF2_CRCENA 1 -#define S6_GMAC_MACCONF2_PADCRCENA 2 -#define S6_GMAC_MACCONF2_LENGTHFCHK 4 -#define S6_GMAC_MACCONF2_HUGEFRAMENA 5 -#define S6_GMAC_MACCONF2_IFMODE 8 -#define S6_GMAC_MACCONF2_IFMODE_NIBBLE 1 -#define S6_GMAC_MACCONF2_IFMODE_BYTE 2 -#define S6_GMAC_MACCONF2_IFMODE_MASK 3 -#define S6_GMAC_MACCONF2_PREAMBLELEN 12 -#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK 0x0F -#define S6_GMAC_MACIPGIFG 0x008 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP 0 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK 0x7F -#define S6_GMAC_MACIPGIFG_MINIFGENFORCE 8 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2 16 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1 24 -#define S6_GMAC_MACHALFDUPLEX 0x00C -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN 0 -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK 0x3F -#define S6_GMAC_MACHALFDUPLEX_RETXMAX 12 -#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK 0x0F -#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF 16 -#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF 17 -#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF 18 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA 19 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN 20 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK 0x0F -#define S6_GMAC_MACMAXFRAMELEN 0x010 -#define S6_GMAC_MACMIICONF 0x020 -#define S6_GMAC_MACMIICONF_CSEL 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV10 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV12 1 -#define S6_GMAC_MACMIICONF_CSEL_DIV14 2 -#define S6_GMAC_MACMIICONF_CSEL_DIV18 3 -#define S6_GMAC_MACMIICONF_CSEL_DIV24 4 -#define S6_GMAC_MACMIICONF_CSEL_DIV34 5 -#define S6_GMAC_MACMIICONF_CSEL_DIV68 6 -#define S6_GMAC_MACMIICONF_CSEL_DIV168 7 -#define S6_GMAC_MACMIICONF_CSEL_MASK 7 -#define S6_GMAC_MACMIICONF_PREAMBLESUPR 4 -#define S6_GMAC_MACMIICONF_SCANAUTOINCR 5 -#define S6_GMAC_MACMIICMD 0x024 -#define S6_GMAC_MACMIICMD_READ 0 -#define S6_GMAC_MACMIICMD_SCAN 1 -#define S6_GMAC_MACMIIADDR 0x028 -#define S6_GMAC_MACMIIADDR_REG 0 -#define S6_GMAC_MACMIIADDR_REG_MASK 0x1F -#define S6_GMAC_MACMIIADDR_PHY 8 -#define S6_GMAC_MACMIIADDR_PHY_MASK 0x1F -#define S6_GMAC_MACMIICTRL 0x02C -#define S6_GMAC_MACMIISTAT 0x030 -#define S6_GMAC_MACMIIINDI 0x034 -#define S6_GMAC_MACMIIINDI_BUSY 0 -#define S6_GMAC_MACMIIINDI_SCAN 1 -#define S6_GMAC_MACMIIINDI_INVAL 2 -#define S6_GMAC_MACINTERFSTAT 0x03C -#define S6_GMAC_MACINTERFSTAT_LINKFAIL 3 -#define S6_GMAC_MACINTERFSTAT_EXCESSDEF 9 -#define S6_GMAC_MACSTATADDR1 0x040 -#define S6_GMAC_MACSTATADDR2 0x044 - -#define S6_GMAC_FIFOCONF0 0x048 -#define S6_GMAC_FIFOCONF0_HSTRSTWT 0 -#define S6_GMAC_FIFOCONF0_HSTRSTSR 1 -#define S6_GMAC_FIFOCONF0_HSTRSTFR 2 -#define S6_GMAC_FIFOCONF0_HSTRSTST 3 -#define S6_GMAC_FIFOCONF0_HSTRSTFT 4 -#define S6_GMAC_FIFOCONF0_WTMENREQ 8 -#define S6_GMAC_FIFOCONF0_SRFENREQ 9 -#define S6_GMAC_FIFOCONF0_FRFENREQ 10 -#define S6_GMAC_FIFOCONF0_STFENREQ 11 -#define S6_GMAC_FIFOCONF0_FTFENREQ 12 -#define S6_GMAC_FIFOCONF0_WTMENRPLY 16 -#define S6_GMAC_FIFOCONF0_SRFENRPLY 17 -#define S6_GMAC_FIFOCONF0_FRFENRPLY 18 -#define S6_GMAC_FIFOCONF0_STFENRPLY 19 -#define S6_GMAC_FIFOCONF0_FTFENRPLY 20 -#define S6_GMAC_FIFOCONF1 0x04C -#define S6_GMAC_FIFOCONF2 0x050 -#define S6_GMAC_FIFOCONF2_CFGLWM 0 -#define S6_GMAC_FIFOCONF2_CFGHWM 16 -#define S6_GMAC_FIFOCONF3 0x054 -#define S6_GMAC_FIFOCONF3_CFGFTTH 0 -#define S6_GMAC_FIFOCONF3_CFGHWMFT 16 -#define S6_GMAC_FIFOCONF4 0x058 -#define S6_GMAC_FIFOCONF_RSV_PREVDROP 0 -#define S6_GMAC_FIFOCONF_RSV_RUNT 1 -#define S6_GMAC_FIFOCONF_RSV_FALSECAR 2 -#define S6_GMAC_FIFOCONF_RSV_CODEERR 3 -#define S6_GMAC_FIFOCONF_RSV_CRCERR 4 -#define S6_GMAC_FIFOCONF_RSV_LENGTHERR 5 -#define S6_GMAC_FIFOCONF_RSV_LENRANGE 6 -#define S6_GMAC_FIFOCONF_RSV_OK 7 -#define S6_GMAC_FIFOCONF_RSV_MULTICAST 8 -#define S6_GMAC_FIFOCONF_RSV_BROADCAST 9 -#define S6_GMAC_FIFOCONF_RSV_DRIBBLE 10 -#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME 11 -#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL 12 -#define S6_GMAC_FIFOCONF_RSV_UNOPCODE 13 -#define S6_GMAC_FIFOCONF_RSV_VLANTAG 14 -#define S6_GMAC_FIFOCONF_RSV_LONGEVENT 15 -#define S6_GMAC_FIFOCONF_RSV_TRUNCATED 16 -#define S6_GMAC_FIFOCONF_RSV_MASK 0x3FFFF -#define S6_GMAC_FIFOCONF5 0x05C -#define S6_GMAC_FIFOCONF5_DROPLT64 18 -#define S6_GMAC_FIFOCONF5_CFGBYTM 19 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE 20 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK 0xF - -#define S6_GMAC_STAT_REGS 0x080 -#define S6_GMAC_STAT_SIZE_MIN 12 -#define S6_GMAC_STATTR64 0x080 -#define S6_GMAC_STATTR64_SIZE 18 -#define S6_GMAC_STATTR127 0x084 -#define S6_GMAC_STATTR127_SIZE 18 -#define S6_GMAC_STATTR255 0x088 -#define S6_GMAC_STATTR255_SIZE 18 -#define S6_GMAC_STATTR511 0x08C -#define S6_GMAC_STATTR511_SIZE 18 -#define S6_GMAC_STATTR1K 0x090 -#define S6_GMAC_STATTR1K_SIZE 18 -#define S6_GMAC_STATTRMAX 0x094 -#define S6_GMAC_STATTRMAX_SIZE 18 -#define S6_GMAC_STATTRMGV 0x098 -#define S6_GMAC_STATTRMGV_SIZE 18 -#define S6_GMAC_STATRBYT 0x09C -#define S6_GMAC_STATRBYT_SIZE 24 -#define S6_GMAC_STATRPKT 0x0A0 -#define S6_GMAC_STATRPKT_SIZE 18 -#define S6_GMAC_STATRFCS 0x0A4 -#define S6_GMAC_STATRFCS_SIZE 12 -#define S6_GMAC_STATRMCA 0x0A8 -#define S6_GMAC_STATRMCA_SIZE 18 -#define S6_GMAC_STATRBCA 0x0AC -#define S6_GMAC_STATRBCA_SIZE 22 -#define S6_GMAC_STATRXCF 0x0B0 -#define S6_GMAC_STATRXCF_SIZE 18 -#define S6_GMAC_STATRXPF 0x0B4 -#define S6_GMAC_STATRXPF_SIZE 12 -#define S6_GMAC_STATRXUO 0x0B8 -#define S6_GMAC_STATRXUO_SIZE 12 -#define S6_GMAC_STATRALN 0x0BC -#define S6_GMAC_STATRALN_SIZE 12 -#define S6_GMAC_STATRFLR 0x0C0 -#define S6_GMAC_STATRFLR_SIZE 16 -#define S6_GMAC_STATRCDE 0x0C4 -#define S6_GMAC_STATRCDE_SIZE 12 -#define S6_GMAC_STATRCSE 0x0C8 -#define S6_GMAC_STATRCSE_SIZE 12 -#define S6_GMAC_STATRUND 0x0CC -#define S6_GMAC_STATRUND_SIZE 12 -#define S6_GMAC_STATROVR 0x0D0 -#define S6_GMAC_STATROVR_SIZE 12 -#define S6_GMAC_STATRFRG 0x0D4 -#define S6_GMAC_STATRFRG_SIZE 12 -#define S6_GMAC_STATRJBR 0x0D8 -#define S6_GMAC_STATRJBR_SIZE 12 -#define S6_GMAC_STATRDRP 0x0DC -#define S6_GMAC_STATRDRP_SIZE 12 -#define S6_GMAC_STATTBYT 0x0E0 -#define S6_GMAC_STATTBYT_SIZE 24 -#define S6_GMAC_STATTPKT 0x0E4 -#define S6_GMAC_STATTPKT_SIZE 18 -#define S6_GMAC_STATTMCA 0x0E8 -#define S6_GMAC_STATTMCA_SIZE 18 -#define S6_GMAC_STATTBCA 0x0EC -#define S6_GMAC_STATTBCA_SIZE 18 -#define S6_GMAC_STATTXPF 0x0F0 -#define S6_GMAC_STATTXPF_SIZE 12 -#define S6_GMAC_STATTDFR 0x0F4 -#define S6_GMAC_STATTDFR_SIZE 12 -#define S6_GMAC_STATTEDF 0x0F8 -#define S6_GMAC_STATTEDF_SIZE 12 -#define S6_GMAC_STATTSCL 0x0FC -#define S6_GMAC_STATTSCL_SIZE 12 -#define S6_GMAC_STATTMCL 0x100 -#define S6_GMAC_STATTMCL_SIZE 12 -#define S6_GMAC_STATTLCL 0x104 -#define S6_GMAC_STATTLCL_SIZE 12 -#define S6_GMAC_STATTXCL 0x108 -#define S6_GMAC_STATTXCL_SIZE 12 -#define S6_GMAC_STATTNCL 0x10C -#define S6_GMAC_STATTNCL_SIZE 13 -#define S6_GMAC_STATTPFH 0x110 -#define S6_GMAC_STATTPFH_SIZE 12 -#define S6_GMAC_STATTDRP 0x114 -#define S6_GMAC_STATTDRP_SIZE 12 -#define S6_GMAC_STATTJBR 0x118 -#define S6_GMAC_STATTJBR_SIZE 12 -#define S6_GMAC_STATTFCS 0x11C -#define S6_GMAC_STATTFCS_SIZE 12 -#define S6_GMAC_STATTXCF 0x120 -#define S6_GMAC_STATTXCF_SIZE 12 -#define S6_GMAC_STATTOVR 0x124 -#define S6_GMAC_STATTOVR_SIZE 12 -#define S6_GMAC_STATTUND 0x128 -#define S6_GMAC_STATTUND_SIZE 12 -#define S6_GMAC_STATTFRG 0x12C -#define S6_GMAC_STATTFRG_SIZE 12 -#define S6_GMAC_STATCARRY(n) (0x130 + 4*(n)) -#define S6_GMAC_STATCARRYMSK(n) (0x138 + 4*(n)) -#define S6_GMAC_STATCARRY1_RDRP 0 -#define S6_GMAC_STATCARRY1_RJBR 1 -#define S6_GMAC_STATCARRY1_RFRG 2 -#define S6_GMAC_STATCARRY1_ROVR 3 -#define S6_GMAC_STATCARRY1_RUND 4 -#define S6_GMAC_STATCARRY1_RCSE 5 -#define S6_GMAC_STATCARRY1_RCDE 6 -#define S6_GMAC_STATCARRY1_RFLR 7 -#define S6_GMAC_STATCARRY1_RALN 8 -#define S6_GMAC_STATCARRY1_RXUO 9 -#define S6_GMAC_STATCARRY1_RXPF 10 -#define S6_GMAC_STATCARRY1_RXCF 11 -#define S6_GMAC_STATCARRY1_RBCA 12 -#define S6_GMAC_STATCARRY1_RMCA 13 -#define S6_GMAC_STATCARRY1_RFCS 14 -#define S6_GMAC_STATCARRY1_RPKT 15 -#define S6_GMAC_STATCARRY1_RBYT 16 -#define S6_GMAC_STATCARRY1_TRMGV 25 -#define S6_GMAC_STATCARRY1_TRMAX 26 -#define S6_GMAC_STATCARRY1_TR1K 27 -#define S6_GMAC_STATCARRY1_TR511 28 -#define S6_GMAC_STATCARRY1_TR255 29 -#define S6_GMAC_STATCARRY1_TR127 30 -#define S6_GMAC_STATCARRY1_TR64 31 -#define S6_GMAC_STATCARRY2_TDRP 0 -#define S6_GMAC_STATCARRY2_TPFH 1 -#define S6_GMAC_STATCARRY2_TNCL 2 -#define S6_GMAC_STATCARRY2_TXCL 3 -#define S6_GMAC_STATCARRY2_TLCL 4 -#define S6_GMAC_STATCARRY2_TMCL 5 -#define S6_GMAC_STATCARRY2_TSCL 6 -#define S6_GMAC_STATCARRY2_TEDF 7 -#define S6_GMAC_STATCARRY2_TDFR 8 -#define S6_GMAC_STATCARRY2_TXPF 9 -#define S6_GMAC_STATCARRY2_TBCA 10 -#define S6_GMAC_STATCARRY2_TMCA 11 -#define S6_GMAC_STATCARRY2_TPKT 12 -#define S6_GMAC_STATCARRY2_TBYT 13 -#define S6_GMAC_STATCARRY2_TFRG 14 -#define S6_GMAC_STATCARRY2_TUND 15 -#define S6_GMAC_STATCARRY2_TOVR 16 -#define S6_GMAC_STATCARRY2_TXCF 17 -#define S6_GMAC_STATCARRY2_TFCS 18 -#define S6_GMAC_STATCARRY2_TJBR 19 - -#define S6_GMAC_HOST_PBLKCTRL 0x140 -#define S6_GMAC_HOST_PBLKCTRL_TXENA 0 -#define S6_GMAC_HOST_PBLKCTRL_RXENA 1 -#define S6_GMAC_HOST_PBLKCTRL_TXSRES 2 -#define S6_GMAC_HOST_PBLKCTRL_RXSRES 3 -#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ 8 -#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ 12 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_16 4 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_32 5 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_64 6 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_128 7 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK 0xF -#define S6_GMAC_HOST_PBLKCTRL_STATENA 16 -#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ 17 -#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR 18 -#define S6_GMAC_HOST_PBLKCTRL_RGMII 19 -#define S6_GMAC_HOST_INTMASK 0x144 -#define S6_GMAC_HOST_INTSTAT 0x148 -#define S6_GMAC_HOST_INT_TXBURSTOVER 3 -#define S6_GMAC_HOST_INT_TXPREWOVER 4 -#define S6_GMAC_HOST_INT_RXBURSTUNDER 5 -#define S6_GMAC_HOST_INT_RXPOSTRFULL 6 -#define S6_GMAC_HOST_INT_RXPOSTRUNDER 7 -#define S6_GMAC_HOST_RXFIFOHWM 0x14C -#define S6_GMAC_HOST_CTRLFRAMXP 0x150 -#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n)) -#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n)) - -#define S6_GMAC_BURST_PREWR 0x1B0 -#define S6_GMAC_BURST_PREWR_LEN 0 -#define S6_GMAC_BURST_PREWR_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_PREWR_CFE 20 -#define S6_GMAC_BURST_PREWR_PPE 21 -#define S6_GMAC_BURST_PREWR_FCS 22 -#define S6_GMAC_BURST_PREWR_PAD 23 -#define S6_GMAC_BURST_POSTRD 0x1D0 -#define S6_GMAC_BURST_POSTRD_LEN 0 -#define S6_GMAC_BURST_POSTRD_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_POSTRD_DROP 20 - - -/* data handling */ - -#define S6_NUM_TX_SKB 8 /* must be larger than TX fifo size */ -#define S6_NUM_RX_SKB 16 -#define S6_MAX_FRLEN 1536 - -struct s6gmac { - u32 reg; - u32 tx_dma; - u32 rx_dma; - u32 io; - u8 tx_chan; - u8 rx_chan; - spinlock_t lock; - u8 tx_skb_i, tx_skb_o; - u8 rx_skb_i, rx_skb_o; - struct sk_buff *tx_skb[S6_NUM_TX_SKB]; - struct sk_buff *rx_skb[S6_NUM_RX_SKB]; - unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)]; - unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)]; - struct phy_device *phydev; - struct { - struct mii_bus *bus; - int irq[PHY_MAX_ADDR]; - } mii; - struct { - unsigned int mbit; - u8 giga; - u8 isup; - u8 full; - } link; -}; - -static void s6gmac_rx_fillfifo(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct sk_buff *skb; - while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) && - (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) && - (skb = netdev_alloc_skb(dev, S6_MAX_FRLEN + 2))) { - pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb; - s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan, - pd->io, (u32)skb->data, S6_MAX_FRLEN); - } -} - -static void s6gmac_rx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 pfx; - struct sk_buff *skb; - while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) > - s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) { - skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]; - pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD); - if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) { - dev_kfree_skb_irq(skb); - } else { - skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN) - & S6_GMAC_BURST_POSTRD_LEN_MASK); - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_UNNECESSARY; - netif_rx(skb); - } - } -} - -static void s6gmac_tx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) > - s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) { - dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - } - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); -} - -struct s6gmac_statinf { - unsigned reg_size : 4; /* 0: unused */ - unsigned reg_off : 6; - unsigned net_index : 6; -}; - -#define S6_STATS_B (8 * sizeof(u32)) -#define S6_STATS_C(b, r, f) [b] = { \ - BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \ - BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \ - >= (1<<4)) + \ - r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \ - BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \ - >= ((1<<6)-1)) + \ - (r - S6_GMAC_STAT_REGS) / sizeof(u32), \ - BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \ - % sizeof(unsigned long)) + \ - BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \ - / sizeof(unsigned long)) >= (1<<6))) + \ - BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \ - != sizeof(unsigned long))) + \ - (offsetof(struct net_device_stats, f)) / sizeof(unsigned long)}, - -static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { { - S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets) - S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast) - S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped) -}, { - S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets) - S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions) - S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped) - S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors) -} }; - -static void s6gmac_stats_collect(struct s6gmac *pd, - const struct s6gmac_statinf *inf) -{ - int b; - for (b = 0; b < S6_STATS_B; b++) { - if (inf[b].reg_size) { - pd->stats[inf[b].net_index] += - readl(pd->reg + S6_GMAC_STAT_REGS - + sizeof(u32) * inf[b].reg_off); - } - } -} - -static void s6gmac_stats_carry(struct s6gmac *pd, - const struct s6gmac_statinf *inf, u32 mask) -{ - int b; - while (mask) { - b = fls(mask) - 1; - mask &= ~(1 << b); - pd->carry[inf[b].net_index] += (1 << inf[b].reg_size); - } -} - -static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry) -{ - int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) & - ~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry)); - return r; -} - -static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry) -{ - u32 mask; - mask = s6gmac_stats_pending(pd, carry); - if (mask) { - writel(mask, pd->reg + S6_GMAC_STATCARRY(carry)); - s6gmac_stats_carry(pd, &statinf[carry][0], mask); - } -} - -static irqreturn_t s6gmac_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct s6gmac *pd = netdev_priv(dev); - if (!dev) - return IRQ_NONE; - spin_lock(&pd->lock); - if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan)) - s6gmac_rx_interrupt(dev); - s6gmac_rx_fillfifo(dev); - if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan)) - s6gmac_tx_interrupt(dev); - s6gmac_stats_interrupt(pd, 0); - s6gmac_stats_interrupt(pd, 1); - spin_unlock(&pd->lock); - return IRQ_HANDLED; -} - -static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n, - u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi) -{ - writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n)); - writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n)); - writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n)); - writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n)); -} - -static inline void s6gmac_stop_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - writel(0, pd->reg + S6_GMAC_MACCONF1); -} - -static inline void s6gmac_init_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int is_rgmii = !!(pd->phydev->supported - & (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)); -#if 0 - writel(1 << S6_GMAC_MACCONF1_SYNCTX | - 1 << S6_GMAC_MACCONF1_SYNCRX | - 1 << S6_GMAC_MACCONF1_TXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RESTXFUNC | - 1 << S6_GMAC_MACCONF1_RESRXFUNC | - 1 << S6_GMAC_MACCONF1_RESTXMACCTRL | - 1 << S6_GMAC_MACCONF1_RESRXMACCTRL, - pd->reg + S6_GMAC_MACCONF1); -#endif - writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1); - udelay(1000); - writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA, - pd->reg + S6_GMAC_MACCONF1); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES | - 1 << S6_GMAC_HOST_PBLKCTRL_RXSRES, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(1 << S6_GMAC_MACCONF1_TXENA | - 1 << S6_GMAC_MACCONF1_RXENA | - (dev->flags & IFF_LOOPBACK ? 1 : 0) - << S6_GMAC_MACCONF1_LOOPBACK, - pd->reg + S6_GMAC_MACCONF1); - writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ? - dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN, - pd->reg + S6_GMAC_MACMAXFRAMELEN); - writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL | - 1 << S6_GMAC_MACCONF2_PADCRCENA | - 1 << S6_GMAC_MACCONF2_LENGTHFCHK | - (pd->link.giga ? - S6_GMAC_MACCONF2_IFMODE_BYTE : - S6_GMAC_MACCONF2_IFMODE_NIBBLE) - << S6_GMAC_MACCONF2_IFMODE | - 7 << S6_GMAC_MACCONF2_PREAMBLELEN, - pd->reg + S6_GMAC_MACCONF2); - writel(0, pd->reg + S6_GMAC_MACSTATADDR1); - writel(0, pd->reg + S6_GMAC_MACSTATADDR2); - writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ | - 1 << S6_GMAC_FIFOCONF0_SRFENREQ | - 1 << S6_GMAC_FIFOCONF0_FRFENREQ | - 1 << S6_GMAC_FIFOCONF0_STFENREQ | - 1 << S6_GMAC_FIFOCONF0_FTFENREQ, - pd->reg + S6_GMAC_FIFOCONF0); - writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH | - 128 << S6_GMAC_FIFOCONF3_CFGHWMFT, - pd->reg + S6_GMAC_FIFOCONF3); - writel((S6_GMAC_FIFOCONF_RSV_MASK & ~( - 1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_OK | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) | - 1 << S6_GMAC_FIFOCONF5_DROPLT64 | - pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM | - 1 << S6_GMAC_FIFOCONF5_RXDROPSIZE, - pd->reg + S6_GMAC_FIFOCONF5); - writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED, - pd->reg + S6_GMAC_FIFOCONF4); - s6gmac_set_dstaddr(pd, 0, - 0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 1, - dev->dev_addr[5] | - dev->dev_addr[4] << 8 | - dev->dev_addr[3] << 16 | - dev->dev_addr[2] << 24, - dev->dev_addr[1] | - dev->dev_addr[0] << 8, - 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 2, - 0x00000000, 0x00000100, 0x00000000, 0x00000100); - s6gmac_set_dstaddr(pd, 3, - 0x00000000, 0x00000000, 0x00000000, 0x00000000); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA | - 1 << S6_GMAC_HOST_PBLKCTRL_RXENA | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); -} - -static void s6mii_enable(struct s6gmac *pd) -{ - writel(readl(pd->reg + S6_GMAC_MACCONF1) & - ~(1 << S6_GMAC_MACCONF1_SOFTRES), - pd->reg + S6_GMAC_MACCONF1); - writel((readl(pd->reg + S6_GMAC_MACMIICONF) - & ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL)) - | (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL), - pd->reg + S6_GMAC_MACMIICONF); -} - -static int s6mii_busy(struct s6gmac *pd, int tmo) -{ - while (readl(pd->reg + S6_GMAC_MACMIIINDI)) { - if (--tmo == 0) - return -ETIME; - udelay(64); - } - return 0; -} - -static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD); - writel(0, pd->reg + S6_GMAC_MACMIICMD); - if (s6mii_busy(pd, 256)) - return -ETIME; - return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT); -} - -static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(value, pd->reg + S6_GMAC_MACMIICTRL); - if (s6mii_busy(pd, 256)) - return -ETIME; - return 0; -} - -static int s6mii_reset(struct mii_bus *bus) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, PHY_INIT_TIMEOUT)) - return -ETIME; - return 0; -} - -static void s6gmac_set_rgmii_txclock(struct s6gmac *pd) -{ - u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL); - pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC); - switch (pd->link.mbit) { - case 10: - pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 100: - pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 1000: - pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC; - break; - default: - return; - } - writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL); -} - -static inline void s6gmac_linkisup(struct net_device *dev, int isup) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - - pd->link.full = phydev->duplex; - pd->link.giga = (phydev->speed == 1000); - if (pd->link.mbit != phydev->speed) { - pd->link.mbit = phydev->speed; - s6gmac_set_rgmii_txclock(pd); - } - pd->link.isup = isup; - if (isup) - netif_carrier_on(dev); - phy_print_status(phydev); -} - -static void s6gmac_adjust_link(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - if (pd->link.isup && - (!phydev->link || - (pd->link.mbit != phydev->speed) || - (pd->link.full != phydev->duplex))) { - pd->link.isup = 0; - netif_tx_disable(dev); - if (!phydev->link) { - netif_carrier_off(dev); - phy_print_status(phydev); - } - } - if (!pd->link.isup && phydev->link) { - if (pd->link.full != phydev->duplex) { - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - if (phydev->duplex) - maccfg |= 1 << S6_GMAC_MACCONF2_FULL; - else - maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (pd->link.giga != (phydev->speed == 1000)) { - u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5); - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK - << S6_GMAC_MACCONF2_IFMODE); - if (phydev->speed == 1000) { - fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM; - maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE - << S6_GMAC_MACCONF2_IFMODE; - } else { - fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM); - maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE - << S6_GMAC_MACCONF2_IFMODE; - } - writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); - s6gmac_linkisup(dev, 1); - } -} - -static inline int s6gmac_phy_start(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int i = 0; - struct phy_device *p = NULL; - while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i]))) - i++; - p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, - PHY_INTERFACE_MODE_RGMII); - if (IS_ERR(p)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(p); - } - p->supported &= PHY_GBIT_FEATURES; - p->advertising = p->supported; - pd->phydev = p; - return 0; -} - -static inline void s6gmac_init_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 mask; - mask = 1 << S6_GMAC_STATCARRY1_RDRP | - 1 << S6_GMAC_STATCARRY1_RJBR | - 1 << S6_GMAC_STATCARRY1_RFRG | - 1 << S6_GMAC_STATCARRY1_ROVR | - 1 << S6_GMAC_STATCARRY1_RUND | - 1 << S6_GMAC_STATCARRY1_RCDE | - 1 << S6_GMAC_STATCARRY1_RFLR | - 1 << S6_GMAC_STATCARRY1_RALN | - 1 << S6_GMAC_STATCARRY1_RMCA | - 1 << S6_GMAC_STATCARRY1_RFCS | - 1 << S6_GMAC_STATCARRY1_RPKT | - 1 << S6_GMAC_STATCARRY1_RBYT; - writel(mask, pd->reg + S6_GMAC_STATCARRY(0)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0)); - mask = 1 << S6_GMAC_STATCARRY2_TDRP | - 1 << S6_GMAC_STATCARRY2_TNCL | - 1 << S6_GMAC_STATCARRY2_TXCL | - 1 << S6_GMAC_STATCARRY2_TEDF | - 1 << S6_GMAC_STATCARRY2_TPKT | - 1 << S6_GMAC_STATCARRY2_TBYT | - 1 << S6_GMAC_STATCARRY2_TFRG | - 1 << S6_GMAC_STATCARRY2_TUND | - 1 << S6_GMAC_STATCARRY2_TOVR | - 1 << S6_GMAC_STATCARRY2_TFCS | - 1 << S6_GMAC_STATCARRY2_TJBR; - writel(mask, pd->reg + S6_GMAC_STATCARRY(1)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1)); -} - -static inline void s6gmac_init_dmac(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - s6dmac_disable_chan(pd->tx_dma, pd->tx_chan); - s6dmac_disable_chan(pd->rx_dma, pd->rx_chan); - s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX); - s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX); -} - -static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&pd->lock, flags); - writel(skb->len << S6_GMAC_BURST_PREWR_LEN | - 0 << S6_GMAC_BURST_PREWR_CFE | - 1 << S6_GMAC_BURST_PREWR_PPE | - 1 << S6_GMAC_BURST_PREWR_FCS | - ((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD, - pd->reg + S6_GMAC_BURST_PREWR); - s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan, - (u32)skb->data, pd->io, skb->len); - if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_stop_queue(dev); - if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) { - printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n", - pd->tx_skb_o, pd->tx_skb_i); - BUG(); - } - pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb; - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static void s6gmac_tx_timeout(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - s6gmac_tx_interrupt(dev); - spin_unlock_irqrestore(&pd->lock, flags); -} - -static int s6gmac_open(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - phy_read_status(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - pd->link.mbit = 0; - s6gmac_linkisup(dev, pd->phydev->link); - s6gmac_init_device(dev); - s6gmac_init_stats(dev); - s6gmac_init_dmac(dev); - s6gmac_rx_fillfifo(dev); - s6dmac_enable_chan(pd->rx_dma, pd->rx_chan, - 2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1); - s6dmac_enable_chan(pd->tx_dma, pd->tx_chan, - 2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1); - writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER | - 0 << S6_GMAC_HOST_INT_TXPREWOVER | - 0 << S6_GMAC_HOST_INT_RXBURSTUNDER | - 0 << S6_GMAC_HOST_INT_RXPOSTRFULL | - 0 << S6_GMAC_HOST_INT_RXPOSTRUNDER, - pd->reg + S6_GMAC_HOST_INTMASK); - spin_unlock_irqrestore(&pd->lock, flags); - phy_start(pd->phydev); - netif_start_queue(dev); - return 0; -} - -static int s6gmac_stop(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - netif_stop_queue(dev); - phy_stop(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - s6gmac_init_dmac(dev); - s6gmac_stop_device(dev); - while (pd->tx_skb_i != pd->tx_skb_o) - dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - while (pd->rx_skb_i != pd->rx_skb_o) - dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]); - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static struct net_device_stats *s6gmac_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct net_device_stats *st = (struct net_device_stats *)&pd->stats; - int i; - do { - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - for (i = 0; i < ARRAY_SIZE(pd->stats); i++) - pd->stats[i] = - pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1); - s6gmac_stats_collect(pd, &statinf[0][0]); - s6gmac_stats_collect(pd, &statinf[1][0]); - i = s6gmac_stats_pending(pd, 0) | - s6gmac_stats_pending(pd, 1); - spin_unlock_irqrestore(&pd->lock, flags); - } while (i); - st->rx_errors = st->rx_crc_errors + - st->rx_frame_errors + - st->rx_length_errors + - st->rx_missed_errors; - st->tx_errors += st->tx_aborted_errors; - return st; -} - -static int s6gmac_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct s6gmac *pd; - int res; - unsigned long i; - struct mii_bus *mb; - - dev = alloc_etherdev(sizeof(*pd)); - if (!dev) - return -ENOMEM; - - dev->open = s6gmac_open; - dev->stop = s6gmac_stop; - dev->hard_start_xmit = s6gmac_tx; - dev->tx_timeout = s6gmac_tx_timeout; - dev->watchdog_timeo = HZ; - dev->get_stats = s6gmac_stats; - dev->irq = platform_get_irq(pdev, 0); - pd = netdev_priv(dev); - memset(pd, 0, sizeof(*pd)); - spin_lock_init(&pd->lock); - pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start; - i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start; - pd->tx_dma = DMA_MASK_DMAC(i); - pd->tx_chan = DMA_INDEX_CHNL(i); - i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start; - pd->rx_dma = DMA_MASK_DMAC(i); - pd->rx_chan = DMA_INDEX_CHNL(i); - pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; - res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev); - if (res) { - printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq); - goto errirq; - } - res = register_netdev(dev); - if (res) { - printk(KERN_ERR DRV_PRMT "error registering device %s\n", - dev->name); - goto errdev; - } - mb = mdiobus_alloc(); - if (!mb) { - printk(KERN_ERR DRV_PRMT "error allocating mii bus\n"); - res = -ENOMEM; - goto errmii; - } - mb->name = "s6gmac_mii"; - mb->read = s6mii_read; - mb->write = s6mii_write; - mb->reset = s6mii_reset; - mb->priv = pd; - snprintf(mb->id, MII_BUS_ID_SIZE, "%s-%x", pdev->name, pdev->id); - mb->phy_mask = ~(1 << 0); - mb->irq = &pd->mii.irq[0]; - for (i = 0; i < PHY_MAX_ADDR; i++) { - int n = platform_get_irq(pdev, i + 1); - if (n < 0) - n = PHY_POLL; - pd->mii.irq[i] = n; - } - mdiobus_register(mb); - pd->mii.bus = mb; - res = s6gmac_phy_start(dev); - if (res) - return res; - platform_set_drvdata(pdev, dev); - return 0; -errmii: - unregister_netdev(dev); -errdev: - free_irq(dev->irq, dev); -errirq: - free_netdev(dev); - return res; -} - -static int s6gmac_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - if (dev) { - struct s6gmac *pd = netdev_priv(dev); - mdiobus_unregister(pd->mii.bus); - unregister_netdev(dev); - free_irq(dev->irq, dev); - free_netdev(dev); - } - return 0; -} - -static struct platform_driver s6gmac_driver = { - .probe = s6gmac_probe, - .remove = s6gmac_remove, - .driver = { - .name = "s6gmac", - }, -}; - -module_platform_driver(s6gmac_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("S6105 on chip Ethernet driver"); -MODULE_AUTHOR("Oskar Schirmer "); -- cgit v1.1 From f620e4fe161f4d488414d7893a690e76b53f0c5e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Dec 2014 22:14:31 +0100 Subject: net: ethernet: stmicro: stmmac: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 4032b17..3039de2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -430,7 +430,6 @@ static struct platform_driver stmmac_pltfr_driver = { .remove = stmmac_pltfr_remove, .driver = { .name = STMMAC_RESOURCE_NAME, - .owner = THIS_MODULE, .pm = &stmmac_pltfr_pm_ops, .of_match_table = of_match_ptr(stmmac_dt_ids), }, -- cgit v1.1 From 6402a577f4688053e98c1ffda1f4a6a59684ba81 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:28:52 +0800 Subject: 8139too: Fix the lack of pci_disable_device For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index 6d0b9df..d4b0a29 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -787,10 +787,10 @@ static struct net_device *rtl8139_init_board(struct pci_dev *pdev) if (rc) goto err_out; + disable_dev_on_err = 1; rc = pci_request_regions (pdev, DRV_NAME); if (rc) goto err_out; - disable_dev_on_err = 1; pci_set_master (pdev); -- cgit v1.1 From ea3c9e13afe739f1ff31130cea57084cfe8c5dcd Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:43:14 +0800 Subject: 8139too: Add netif_napi_del in the driver For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index d4b0a29..78bb4ce 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -1110,6 +1110,7 @@ static int rtl8139_init_one(struct pci_dev *pdev, return 0; err_out: + netif_napi_del(&tp->napi); __rtl8139_cleanup_dev (dev); pci_disable_device (pdev); return i; @@ -1124,6 +1125,7 @@ static void rtl8139_remove_one(struct pci_dev *pdev) assert (dev != NULL); cancel_delayed_work_sync(&tp->thread); + netif_napi_del(&tp->napi); unregister_netdev (dev); -- cgit v1.1 From 492f5add4be84652bbe13da8a250d60c6856a5c5 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 22 Dec 2014 10:21:57 +0200 Subject: net/mlx4_en: Doorbell is byteswapped in Little Endian archs iowrite32() will byteswap it's argument on big endian archs. iowrite32be() will byteswap on little endian archs. Since we don't want to do this unnecessary byteswap on the fast path, doorbell is stored in the NIC's native endianness. Using the right iowrite() according to the arch endianness. CC: Wei Yang CC: David Laight Fixes: 6a4e812 ("net/mlx4_en: Avoid calling bswap in tx fast path") Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index a308d41..e3357bf 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -962,7 +962,17 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) tx_desc->ctrl.owner_opcode = op_own; if (send_doorbell) { wmb(); - iowrite32(ring->doorbell_qpn, + /* Since there is no iowrite*_native() that writes the + * value as is, without byteswapping - using the one + * the doesn't do byteswapping in the relevant arch + * endianness. + */ +#if defined(__LITTLE_ENDIAN) + iowrite32( +#else + iowrite32be( +#endif + ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL); } else { ring->xmit_more++; -- cgit v1.1 From 3079c652141f9d6377417a7e8fd650c9948df65e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 22 Dec 2014 20:35:25 +1100 Subject: caif: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks caif. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers caif tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in caif. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/caif/caif_virtio.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index a5fefb9..b306210 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -257,7 +257,6 @@ static int cfv_rx_poll(struct napi_struct *napi, int quota) struct vringh_kiov *riov = &cfv->ctx.riov; unsigned int skb_len; -again: do { skb = NULL; @@ -322,7 +321,6 @@ exit: napi_schedule_prep(napi)) { vringh_notify_disable_kern(cfv->vr_rx); __napi_schedule(napi); - goto again; } break; -- cgit v1.1 From 5ad24def21b205a8e91925cd276b0a794b5ace82 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Mon, 22 Dec 2014 15:14:37 +0530 Subject: cxgb4vf: Fix ethtool get_settings for VF driver Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/adapter.h | 4 + .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 142 ++++++++++++++++++--- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 2 +- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 54 ++++---- 4 files changed, 161 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h index d00a751..6049f70 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h @@ -96,6 +96,9 @@ struct port_info { s16 xact_addr_filt; /* index of our MAC address filter */ u16 rss_size; /* size of VI's RSS table slice */ u8 pidx; /* index into adapter port[] */ + s8 mdio_addr; + u8 port_type; /* firmware port type */ + u8 mod_type; /* firmware module type */ u8 port_id; /* physical port ID */ u8 nqsets; /* # of "Queue Sets" */ u8 first_qset; /* index of first "Queue Set" */ @@ -522,6 +525,7 @@ static inline struct adapter *netdev2adap(const struct net_device *dev) * is "contracted" to provide for the common code. */ void t4vf_os_link_changed(struct adapter *, int, int); +void t4vf_os_portmod_changed(struct adapter *, int); /* * SGE function prototype declarations. diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index aa74ec3..2215d43 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "t4vf_common.h" #include "t4vf_defs.h" @@ -210,6 +211,38 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) } /* + * THe port module type has changed on the indicated "port" (Virtual + * Interface). + */ +void t4vf_os_portmod_changed(struct adapter *adapter, int pidx) +{ + static const char * const mod_str[] = { + NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" + }; + const struct net_device *dev = adapter->port[pidx]; + const struct port_info *pi = netdev_priv(dev); + + if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) + dev_info(adapter->pdev_dev, "%s: port module unplugged\n", + dev->name); + else if (pi->mod_type < ARRAY_SIZE(mod_str)) + dev_info(adapter->pdev_dev, "%s: %s port module inserted\n", + dev->name, mod_str[pi->mod_type]); + else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) + dev_info(adapter->pdev_dev, "%s: unsupported optical port " + "module inserted\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) + dev_info(adapter->pdev_dev, "%s: unknown port module inserted," + "forcing TWINAX\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR) + dev_info(adapter->pdev_dev, "%s: transceiver module error\n", + dev->name); + else + dev_info(adapter->pdev_dev, "%s: unknown module type %d " + "inserted\n", dev->name, pi->mod_type); +} + +/* * Net device operations. * ====================== */ @@ -1193,24 +1226,103 @@ static void cxgb4vf_poll_controller(struct net_device *dev) * state of the port to which we're linked. */ -/* - * Return current port link settings. - */ -static int cxgb4vf_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - const struct port_info *pi = netdev_priv(dev); +static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type, + unsigned int caps) +{ + unsigned int v = 0; + + if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || + type == FW_PORT_TYPE_BT_XAUI) { + v |= SUPPORTED_TP; + if (caps & FW_PORT_CAP_SPEED_100M) + v |= SUPPORTED_100baseT_Full; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { + v |= SUPPORTED_Backplane; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseKX_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseKX4_Full; + } else if (type == FW_PORT_TYPE_KR) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; + else if (type == FW_PORT_TYPE_BP_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; + else if (type == FW_PORT_TYPE_BP4_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKX4_Full; + else if (type == FW_PORT_TYPE_FIBER_XFI || + type == FW_PORT_TYPE_FIBER_XAUI || + type == FW_PORT_TYPE_SFP || + type == FW_PORT_TYPE_QSFP_10G || + type == FW_PORT_TYPE_QSA) { + v |= SUPPORTED_FIBRE; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_BP40_BA || + type == FW_PORT_TYPE_QSFP) { + v |= SUPPORTED_40000baseSR4_Full; + v |= SUPPORTED_FIBRE; + } + + if (caps & FW_PORT_CAP_ANEG) + v |= SUPPORTED_Autoneg; + return v; +} + +static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + const struct port_info *p = netdev_priv(dev); + + if (p->port_type == FW_PORT_TYPE_BT_SGMII || + p->port_type == FW_PORT_TYPE_BT_XFI || + p->port_type == FW_PORT_TYPE_BT_XAUI) + cmd->port = PORT_TP; + else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || + p->port_type == FW_PORT_TYPE_FIBER_XAUI) + cmd->port = PORT_FIBRE; + else if (p->port_type == FW_PORT_TYPE_SFP || + p->port_type == FW_PORT_TYPE_QSFP_10G || + p->port_type == FW_PORT_TYPE_QSA || + p->port_type == FW_PORT_TYPE_QSFP) { + if (p->mod_type == FW_PORT_MOD_TYPE_LR || + p->mod_type == FW_PORT_MOD_TYPE_SR || + p->mod_type == FW_PORT_MOD_TYPE_ER || + p->mod_type == FW_PORT_MOD_TYPE_LRM) + cmd->port = PORT_FIBRE; + else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + cmd->port = PORT_DA; + else + cmd->port = PORT_OTHER; + } else + cmd->port = PORT_OTHER; - cmd->supported = pi->link_cfg.supported; - cmd->advertising = pi->link_cfg.advertising; + if (p->mdio_addr >= 0) { + cmd->phy_address = p->mdio_addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? + MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + } else { + cmd->phy_address = 0; /* not really, but no better option */ + cmd->transceiver = XCVR_INTERNAL; + cmd->mdio_support = 0; + } + + cmd->supported = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.supported); + cmd->advertising = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.advertising); ethtool_cmd_speed_set(cmd, - netif_carrier_ok(dev) ? pi->link_cfg.speed : -1); + netif_carrier_ok(dev) ? p->link_cfg.speed : 0); cmd->duplex = DUPLEX_FULL; - - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = pi->port_id; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = pi->link_cfg.autoneg; + cmd->autoneg = p->link_cfg.autoneg; cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; return 0; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8d3237f..b9debb4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -230,7 +230,7 @@ struct adapter_params { static inline bool is_10g_port(const struct link_config *lc) { - return (lc->supported & SUPPORTED_10000baseT_Full) != 0; + return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } static inline bool is_x_10g_port(const struct link_config *lc) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 02e8833..21dc9a2 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -245,6 +245,10 @@ static int hash_mac_addr(const u8 *addr) return a & 0x3f; } +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + /** * init_link_config - initialize a link's SW state * @lc: structure holding the link state @@ -259,8 +263,8 @@ static void init_link_config(struct link_config *lc, unsigned int caps) lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; - if (lc->supported & SUPPORTED_Autoneg) { - lc->advertising = lc->supported; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; lc->autoneg = AUTONEG_ENABLE; lc->requested_fc |= PAUSE_AUTONEG; } else { @@ -280,7 +284,6 @@ int t4vf_port_init(struct adapter *adapter, int pidx) struct fw_vi_cmd vi_cmd, vi_rpl; struct fw_port_cmd port_cmd, port_rpl; int v; - u32 word; /* * Execute a VI Read command to get our Virtual Interface information @@ -319,19 +322,11 @@ int t4vf_port_init(struct adapter *adapter, int pidx) if (v) return v; - v = 0; - word = be16_to_cpu(port_rpl.u.info.pcap); - if (word & FW_PORT_CAP_SPEED_100M) - v |= SUPPORTED_100baseT_Full; - if (word & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (word & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - if (word & FW_PORT_CAP_SPEED_40G) - v |= SUPPORTED_40000baseSR4_Full; - if (word & FW_PORT_CAP_ANEG) - v |= SUPPORTED_Autoneg; - init_link_config(&pi->link_cfg, v); + v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype); + pi->port_type = FW_PORT_CMD_PTYPE_G(v); + pi->mod_type = FW_PORT_MOD_TYPE_NA; + + init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap)); return 0; } @@ -1491,7 +1486,7 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) */ const struct fw_port_cmd *port_cmd = (const struct fw_port_cmd *)rpl; - u32 word; + u32 stat, mod; int action, port_id, link_ok, speed, fc, pidx; /* @@ -1509,21 +1504,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) port_id = FW_PORT_CMD_PORTID_G( be32_to_cpu(port_cmd->op_to_portid)); - word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); - link_ok = (word & FW_PORT_CMD_LSTATUS_F) != 0; + stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); + link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0; speed = 0; fc = 0; - if (word & FW_PORT_CMD_RXPAUSE_F) + if (stat & FW_PORT_CMD_RXPAUSE_F) fc |= PAUSE_RX; - if (word & FW_PORT_CMD_TXPAUSE_F) + if (stat & FW_PORT_CMD_TXPAUSE_F) fc |= PAUSE_TX; - if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) speed = 100; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) speed = 1000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; /* @@ -1540,12 +1535,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) continue; lc = &pi->link_cfg; + + mod = FW_PORT_CMD_MODTYPE_G(stat); + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4vf_os_portmod_changed(adapter, pidx); + } + if (link_ok != lc->link_ok || speed != lc->speed || fc != lc->fc) { /* something changed */ lc->link_ok = link_ok; lc->speed = speed; lc->fc = fc; + lc->supported = + be16_to_cpu(port_cmd->u.info.pcap); t4vf_os_link_changed(adapter, pidx, link_ok); } } -- cgit v1.1 From 2dc49d1680b534877fd20cce52557ea542bb06b6 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 22 Dec 2014 18:22:48 +0100 Subject: tcp6: don't move IP6CB before xfrm6_policy_check() When xfrm6_policy_check() is used, _decode_session6() is called after some intermediate functions. This function uses IP6CB(), thus TCP_SKB_CB() must be prepared after the call of xfrm6_policy_check(). Before this patch, scenarii with IPv6 + TCP + IPsec Transport are broken. Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Reported-by: Huaibin Wang Suggested-by: Eric Dumazet Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 45 +++++++++++++++++++++++++++++---------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 5ff8780..9c0b54e 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1387,6 +1387,28 @@ ipv6_pktoptions: return 0; } +static void tcp_v6_fill_cb(struct sk_buff *skb, const struct ipv6hdr *hdr, + const struct tcphdr *th) +{ + /* This is tricky: we move IP6CB at its correct location into + * TCP_SKB_CB(). It must be done after xfrm6_policy_check(), because + * _decode_session6() uses IP6CB(). + * barrier() makes sure compiler won't play aliasing games. + */ + memmove(&TCP_SKB_CB(skb)->header.h6, IP6CB(skb), + sizeof(struct inet6_skb_parm)); + barrier(); + + TCP_SKB_CB(skb)->seq = ntohl(th->seq); + TCP_SKB_CB(skb)->end_seq = (TCP_SKB_CB(skb)->seq + th->syn + th->fin + + skb->len - th->doff*4); + TCP_SKB_CB(skb)->ack_seq = ntohl(th->ack_seq); + TCP_SKB_CB(skb)->tcp_flags = tcp_flag_byte(th); + TCP_SKB_CB(skb)->tcp_tw_isn = 0; + TCP_SKB_CB(skb)->ip_dsfield = ipv6_get_dsfield(hdr); + TCP_SKB_CB(skb)->sacked = 0; +} + static int tcp_v6_rcv(struct sk_buff *skb) { const struct tcphdr *th; @@ -1418,24 +1440,9 @@ static int tcp_v6_rcv(struct sk_buff *skb) th = tcp_hdr(skb); hdr = ipv6_hdr(skb); - /* This is tricky : We move IPCB at its correct location into TCP_SKB_CB() - * barrier() makes sure compiler wont play fool^Waliasing games. - */ - memmove(&TCP_SKB_CB(skb)->header.h6, IP6CB(skb), - sizeof(struct inet6_skb_parm)); - barrier(); - - TCP_SKB_CB(skb)->seq = ntohl(th->seq); - TCP_SKB_CB(skb)->end_seq = (TCP_SKB_CB(skb)->seq + th->syn + th->fin + - skb->len - th->doff*4); - TCP_SKB_CB(skb)->ack_seq = ntohl(th->ack_seq); - TCP_SKB_CB(skb)->tcp_flags = tcp_flag_byte(th); - TCP_SKB_CB(skb)->tcp_tw_isn = 0; - TCP_SKB_CB(skb)->ip_dsfield = ipv6_get_dsfield(hdr); - TCP_SKB_CB(skb)->sacked = 0; sk = __inet6_lookup_skb(&tcp_hashinfo, skb, th->source, th->dest, - tcp_v6_iif(skb)); + inet6_iif(skb)); if (!sk) goto no_tcp_socket; @@ -1451,6 +1458,8 @@ process: if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; + tcp_v6_fill_cb(skb, hdr, th); + #ifdef CONFIG_TCP_MD5SIG if (tcp_v6_inbound_md5_hash(sk, skb)) goto discard_and_relse; @@ -1482,6 +1491,8 @@ no_tcp_socket: if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) goto discard_it; + tcp_v6_fill_cb(skb, hdr, th); + if (skb->len < (th->doff<<2) || tcp_checksum_complete(skb)) { csum_error: TCP_INC_STATS_BH(net, TCP_MIB_CSUMERRORS); @@ -1505,6 +1516,8 @@ do_time_wait: goto discard_it; } + tcp_v6_fill_cb(skb, hdr, th); + if (skb->len < (th->doff<<2)) { inet_twsk_put(inet_twsk(sk)); goto bad_packet; -- cgit v1.1 From af6dabc9c70ae3f307685b1f32f52d60b1bf0527 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 19 Dec 2014 11:09:13 +0800 Subject: net: drop the packet when fails to do software segmentation or header check Commit cecda693a969816bac5e470e1d9c9c0ef5567bca ("net: keep original skb which only needs header checking during software GSO") keeps the original skb for packets that only needs header check, but it doesn't drop the packet if software segmentation or header check were failed. Fixes cecda693a9 ("net: keep original skb which only needs header checking during software GSO") Cc: Eric Dumazet Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index f411c28..a989f85 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2673,7 +2673,7 @@ static struct sk_buff *validate_xmit_skb(struct sk_buff *skb, struct net_device segs = skb_gso_segment(skb, features); if (IS_ERR(segs)) { - segs = NULL; + goto out_kfree_skb; } else if (segs) { consume_skb(skb); skb = segs; -- cgit v1.1 From 5b6698b0e4a37053de35cc24ee695b98a7eb712b Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 20 Dec 2014 13:48:55 +0100 Subject: batman-adv: Calculate extra tail size based on queued fragments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605 ("batman-adv: Receive fragmented packets and merge"). The new code provided a mostly unused parameter skb for the merging function. It is used inside the function to calculate the additionally needed skb tailroom. But instead of increasing its own tailroom, it is only increasing the tailroom of the first queued skb. This is not correct in some situations because the first queued entry can be a different one than the parameter. An observed problem was: 1. packet with size 104, total_size 1464, fragno 1 was received - packet is queued 2. packet with size 1400, total_size 1464, fragno 0 was received - packet is queued at the end of the list 3. enough data was received and can be given to the merge function (1464 == (1400 - 20) + (104 - 20)) - merge functions gets 1400 byte large packet as skb argument 4. merge function gets first entry in queue (104 byte) - stored as skb_out 5. merge function calculates the required extra tail as total_size - skb->len - pskb_expand_head tail of skb_out with 64 bytes 6. merge function tries to squeeze the extra 1380 bytes from the second queued skb (1400 byte aka skb parameter) in the 64 extra tail bytes of skb_out Instead calculate the extra required tail bytes for skb_out also using skb_out instead of using the parameter skb. The skb parameter is only used to get the total_size from the last received packet. This is also the total_size used to decide that all fragments were received. Reported-by: Philipp Psurek Signed-off-by: Sven Eckelmann Acked-by: Martin Hundebøll Signed-off-by: David S. Miller --- net/batman-adv/fragmentation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index fc1835c..8af3461 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -251,7 +251,7 @@ batadv_frag_merge_packets(struct hlist_head *chain, struct sk_buff *skb) kfree(entry); /* Make room for the rest of the fragments. */ - if (pskb_expand_head(skb_out, 0, size - skb->len, GFP_ATOMIC) < 0) { + if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) { kfree_skb(skb_out); skb_out = NULL; goto free; -- cgit v1.1 From 0402e444cd199389b7fe47be68a67b817e09e097 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 20 Dec 2014 13:48:56 +0100 Subject: batman-adv: Unify fragment size calculation The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605 ("batman-adv: Receive fragmented packets and merge") by an implementation which can handle up to 16 fragments of a packet. The packet is prepared for the split in fragments by the function batadv_frag_send_packet and the actual split is done by batadv_frag_create. Both functions calculate the size of a fragment themself. But their calculation differs because batadv_frag_send_packet also subtracts ETH_HLEN. Therefore, the check in batadv_frag_send_packet "can a full fragment can be created?" may return true even when batadv_frag_create cannot create a full fragment. The function batadv_frag_create doesn't check the size of the skb before splitting it and therefore might try to create a larger fragment than the remaining buffer. This creates an integer underflow and an invalid len is given to skb_split. Signed-off-by: Sven Eckelmann Signed-off-by: David S. Miller --- net/batman-adv/fragmentation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index 8af3461..00f9e14 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -434,7 +434,7 @@ bool batadv_frag_send_packet(struct sk_buff *skb, * fragments larger than BATADV_FRAG_MAX_FRAG_SIZE */ mtu = min_t(unsigned, mtu, BATADV_FRAG_MAX_FRAG_SIZE); - max_fragment_size = (mtu - header_size - ETH_HLEN); + max_fragment_size = mtu - header_size; max_packet_size = max_fragment_size * BATADV_FRAG_MAX_FRAGMENTS; /* Don't even try to fragment, if we need more than 16 fragments */ -- cgit v1.1 From 0d1644919578db525b9a7b6c8197ce02adbfce26 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sat, 20 Dec 2014 13:48:57 +0100 Subject: batman-adv: avoid NULL dereferences and fix if check Gateway having bandwidth_down equal to zero are not accepted at all and so never added to the Gateway list. For this reason checking the bandwidth_down member in batadv_gw_out_of_range() is useless. This is probably a copy/paste error and this check was supposed to be "!gw_node" only. Moreover, the way the check is written now may also lead to a NULL dereference. Fix this by rewriting the if-condition properly. Introduced by 414254e342a0d58144de40c3da777521ebaeeb07 ("batman-adv: tvlv - gateway download/upload bandwidth container") Signed-off-by: Antonio Quartulli Reported-by: David Binderman Signed-off-by: Marek Lindner Signed-off-by: David S. Miller --- net/batman-adv/gateway_client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 90cff58..e0bcf9e 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -810,7 +810,7 @@ bool batadv_gw_out_of_range(struct batadv_priv *bat_priv, goto out; gw_node = batadv_gw_node_get(bat_priv, orig_dst_node); - if (!gw_node->bandwidth_down == 0) + if (!gw_node) goto out; switch (atomic_read(&bat_priv->gw_mode)) { -- cgit v1.1 From 726ce70e9e4050409243f3a1d735dc86bc6e6e57 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 21 Dec 2014 07:16:21 +1100 Subject: net: Move napi polling code out of net_rx_action This patch creates a new function napi_poll and moves the napi polling code from net_rx_action into it. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 98 ++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 54 insertions(+), 44 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index a989f85..493ae8e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4557,6 +4557,59 @@ void netif_napi_del(struct napi_struct *napi) } EXPORT_SYMBOL(netif_napi_del); +static int napi_poll(struct napi_struct *n, struct list_head *repoll) +{ + void *have; + int work, weight; + + list_del_init(&n->poll_list); + + have = netpoll_poll_lock(n); + + weight = n->weight; + + /* This NAPI_STATE_SCHED test is for avoiding a race + * with netpoll's poll_napi(). Only the entity which + * obtains the lock and sees NAPI_STATE_SCHED set will + * actually make the ->poll() call. Therefore we avoid + * accidentally calling ->poll() when NAPI is not scheduled. + */ + work = 0; + if (test_bit(NAPI_STATE_SCHED, &n->state)) { + work = n->poll(n, weight); + trace_napi_poll(n); + } + + WARN_ON_ONCE(work > weight); + + if (likely(work < weight)) + goto out_unlock; + + /* Drivers must not modify the NAPI state if they + * consume the entire weight. In such cases this code + * still "owns" the NAPI instance and therefore can + * move the instance around on the list at-will. + */ + if (unlikely(napi_disable_pending(n))) { + napi_complete(n); + goto out_unlock; + } + + if (n->gro_list) { + /* flush too old packets + * If HZ < 1000, flush all packets. + */ + napi_gro_flush(n, HZ >= 1000); + } + + list_add_tail(&n->poll_list, repoll); + +out_unlock: + netpoll_poll_unlock(have); + + return work; +} + static void net_rx_action(struct softirq_action *h) { struct softnet_data *sd = this_cpu_ptr(&softnet_data); @@ -4564,7 +4617,6 @@ static void net_rx_action(struct softirq_action *h) int budget = netdev_budget; LIST_HEAD(list); LIST_HEAD(repoll); - void *have; local_irq_disable(); list_splice_init(&sd->poll_list, &list); @@ -4572,7 +4624,6 @@ static void net_rx_action(struct softirq_action *h) while (!list_empty(&list)) { struct napi_struct *n; - int work, weight; /* If softirq window is exhausted then punt. * Allow this to run for 2 jiffies since which will allow @@ -4583,48 +4634,7 @@ static void net_rx_action(struct softirq_action *h) n = list_first_entry(&list, struct napi_struct, poll_list); - list_del_init(&n->poll_list); - - have = netpoll_poll_lock(n); - - weight = n->weight; - - /* This NAPI_STATE_SCHED test is for avoiding a race - * with netpoll's poll_napi(). Only the entity which - * obtains the lock and sees NAPI_STATE_SCHED set will - * actually make the ->poll() call. Therefore we avoid - * accidentally calling ->poll() when NAPI is not scheduled. - */ - work = 0; - if (test_bit(NAPI_STATE_SCHED, &n->state)) { - work = n->poll(n, weight); - trace_napi_poll(n); - } - - WARN_ON_ONCE(work > weight); - - budget -= work; - - /* Drivers must not modify the NAPI state if they - * consume the entire weight. In such cases this code - * still "owns" the NAPI instance and therefore can - * move the instance around on the list at-will. - */ - if (unlikely(work == weight)) { - if (unlikely(napi_disable_pending(n))) { - napi_complete(n); - } else { - if (n->gro_list) { - /* flush too old packets - * If HZ < 1000, flush all packets. - */ - napi_gro_flush(n, HZ >= 1000); - } - list_add_tail(&n->poll_list, &repoll); - } - } - - netpoll_poll_unlock(have); + budget -= napi_poll(n, &repoll); } if (!sd_has_rps_ipi_waiting(sd) && -- cgit v1.1 From 001ce546bb537bb5b7821f05633556a0c9787e32 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 21 Dec 2014 07:16:22 +1100 Subject: net: Detect drivers that reschedule NAPI and exhaust budget The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) required drivers to leave poll_list empty if the entire budget is consumed. We have already had two broken drivers so let's add a check for this. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 493ae8e..c0cf129 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4602,6 +4602,15 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll) napi_gro_flush(n, HZ >= 1000); } + /* Some drivers may have called napi_schedule + * prior to exhausting their budget. + */ + if (unlikely(!list_empty(&n->poll_list))) { + pr_warn_once("%s: Budget exhausted after napi rescheduled\n", + n->dev ? n->dev->name : "backlog"); + goto out_unlock; + } + list_add_tail(&n->poll_list, repoll); out_unlock: -- cgit v1.1 From 6bd373ebbac4b13ecd39ddc37a0dc5ad4c5e4585 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 21 Dec 2014 07:16:24 +1100 Subject: net: Always poll at least one device in net_rx_action We should only perform the softnet_break check after we have polled at least one device in net_rx_action. Otherwise a zero or negative setting of netdev_budget can lock up the whole system. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index c0cf129..b85eba9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4634,16 +4634,15 @@ static void net_rx_action(struct softirq_action *h) while (!list_empty(&list)) { struct napi_struct *n; + n = list_first_entry(&list, struct napi_struct, poll_list); + budget -= napi_poll(n, &repoll); + /* If softirq window is exhausted then punt. * Allow this to run for 2 jiffies since which will allow * an average latency of 1.5/HZ. */ if (unlikely(budget <= 0 || time_after_eq(jiffies, time_limit))) goto softnet_break; - - - n = list_first_entry(&list, struct napi_struct, poll_list); - budget -= napi_poll(n, &repoll); } if (!sd_has_rps_ipi_waiting(sd) && -- cgit v1.1 From ceb8d5bf17d366534f32d2f60f41d905a5bc864b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 21 Dec 2014 07:16:25 +1100 Subject: net: Rearrange loop in net_rx_action This patch rearranges the loop in net_rx_action to reduce the amount of jumping back and forth when reading the code. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index b85eba9..c97ae6f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4631,9 +4631,15 @@ static void net_rx_action(struct softirq_action *h) list_splice_init(&sd->poll_list, &list); local_irq_enable(); - while (!list_empty(&list)) { + for (;;) { struct napi_struct *n; + if (list_empty(&list)) { + if (!sd_has_rps_ipi_waiting(sd) && list_empty(&repoll)) + return; + break; + } + n = list_first_entry(&list, struct napi_struct, poll_list); budget -= napi_poll(n, &repoll); @@ -4641,15 +4647,13 @@ static void net_rx_action(struct softirq_action *h) * Allow this to run for 2 jiffies since which will allow * an average latency of 1.5/HZ. */ - if (unlikely(budget <= 0 || time_after_eq(jiffies, time_limit))) - goto softnet_break; + if (unlikely(budget <= 0 || + time_after_eq(jiffies, time_limit))) { + sd->time_squeeze++; + break; + } } - if (!sd_has_rps_ipi_waiting(sd) && - list_empty(&list) && - list_empty(&repoll)) - return; -out: local_irq_disable(); list_splice_tail_init(&sd->poll_list, &list); @@ -4659,12 +4663,6 @@ out: __raise_softirq_irqoff(NET_RX_SOFTIRQ); net_rps_action_and_irq_enable(sd); - - return; - -softnet_break: - sd->time_squeeze++; - goto out; } struct netdev_adjacent { -- cgit v1.1 From d0edc7bf397a5e0f312bf8a1e87cfee0019dc07b Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:11 -0800 Subject: mpls: Fix config check for mpls. Fixes MPLS GSO for case when mpls is compiled as kernel module. Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index c97ae6f..67b6210 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2522,7 +2522,7 @@ static int illegal_highdma(struct net_device *dev, struct sk_buff *skb) /* If MPLS offload request, verify we are testing hardware MPLS features * instead of standard features for the netdev. */ -#ifdef CONFIG_NET_MPLS_GSO +#if IS_ENABLED(CONFIG_NET_MPLS_GSO) static netdev_features_t net_mpls_features(struct sk_buff *skb, netdev_features_t features, __be16 type) -- cgit v1.1 From 4cc1beca3096a6425543cb83a61665b9c8040f98 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:16 -0800 Subject: mpls: Fix allowed protocols for mpls gso MPLS and Tunnel GSO does not work together. Reject packet which request such GSO. Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/mpls/mpls_gso.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/mpls/mpls_gso.c b/net/mpls/mpls_gso.c index ca27837..349295d 100644 --- a/net/mpls/mpls_gso.c +++ b/net/mpls/mpls_gso.c @@ -31,10 +31,7 @@ static struct sk_buff *mpls_gso_segment(struct sk_buff *skb, SKB_GSO_TCPV6 | SKB_GSO_UDP | SKB_GSO_DODGY | - SKB_GSO_TCP_ECN | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP))) + SKB_GSO_TCP_ECN))) goto out; /* Setup inner SKB. */ -- cgit v1.1 From ec449f40bb3e19c77f62ddabf7c1fe3ccefece6f Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:20 -0800 Subject: openvswitch: Fix MPLS action validation. Linux stack does not implement GSO for packet with multiple encapsulations. Therefore there was check in MPLS action validation to detect such case, But this check introduced bug which deleted one or more actions from actions list. Following patch removes this check to fix the validation. Fixes: 25cd9ba0abc ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar Reported-by: Srinivas Neginhal Acked-by: Jarno Rajahalme Signed-off-by: David S. Miller --- net/openvswitch/flow_netlink.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c index 9645a21..d1eecf7 100644 --- a/net/openvswitch/flow_netlink.c +++ b/net/openvswitch/flow_netlink.c @@ -1753,7 +1753,6 @@ static int __ovs_nla_copy_actions(const struct nlattr *attr, __be16 eth_type, __be16 vlan_tci, bool log) { const struct nlattr *a; - bool out_tnl_port = false; int rem, err; if (depth >= SAMPLE_ACTION_DEPTH) @@ -1796,8 +1795,6 @@ static int __ovs_nla_copy_actions(const struct nlattr *attr, case OVS_ACTION_ATTR_OUTPUT: if (nla_get_u32(a) >= DP_MAX_PORTS) return -EINVAL; - out_tnl_port = false; - break; case OVS_ACTION_ATTR_HASH: { @@ -1832,12 +1829,6 @@ static int __ovs_nla_copy_actions(const struct nlattr *attr, case OVS_ACTION_ATTR_PUSH_MPLS: { const struct ovs_action_push_mpls *mpls = nla_data(a); - /* Networking stack do not allow simultaneous Tunnel - * and MPLS GSO. - */ - if (out_tnl_port) - return -EINVAL; - if (!eth_p_mpls(mpls->mpls_ethertype)) return -EINVAL; /* Prohibit push MPLS other than to a white list @@ -1873,11 +1864,9 @@ static int __ovs_nla_copy_actions(const struct nlattr *attr, case OVS_ACTION_ATTR_SET: err = validate_set(a, key, sfa, - &out_tnl_port, eth_type, log); + &skip_copy, eth_type, log); if (err) return err; - - skip_copy = out_tnl_port; break; case OVS_ACTION_ATTR_SAMPLE: -- cgit v1.1 From cbe7e76d94f59e89302bd514e4b685e03d1ebbe4 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:28 -0800 Subject: openvswitch: Fix GSO with multiple MPLS label. MPLS GSO needs to know inner most protocol to process GSO packets. Fixes: 25cd9ba0abc ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/actions.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index 764fdc3..770064c 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -147,7 +147,8 @@ static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key, hdr = eth_hdr(skb); hdr->h_proto = mpls->mpls_ethertype; - skb_set_inner_protocol(skb, skb->protocol); + if (!skb->inner_protocol) + skb_set_inner_protocol(skb, skb->protocol); skb->protocol = mpls->mpls_ethertype; invalidate_flow_key(key); -- cgit v1.1 From 997e068ebc17d8d57e735578df44b6341cd5f2f3 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:32 -0800 Subject: openvswitch: Fix vport_send double free Today vport-send has complex error handling because it involves freeing skb and updating stats depending on return value from vport send implementation. This can be simplified by delegating responsibility of freeing skb to the vport implementation for all cases. So that vport-send needs just update stats. Fixes: 91b7514cdf ("openvswitch: Unify vport error stats handling") Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/ipv4/geneve.c | 6 +++++- net/openvswitch/vport-geneve.c | 3 +++ net/openvswitch/vport-gre.c | 18 +++++++++++------- net/openvswitch/vport-vxlan.c | 2 ++ net/openvswitch/vport.c | 5 ++--- 5 files changed, 23 insertions(+), 11 deletions(-) diff --git a/net/ipv4/geneve.c b/net/ipv4/geneve.c index 95e47c9..394a200 100644 --- a/net/ipv4/geneve.c +++ b/net/ipv4/geneve.c @@ -122,14 +122,18 @@ int geneve_xmit_skb(struct geneve_sock *gs, struct rtable *rt, int err; skb = udp_tunnel_handle_offloads(skb, !gs->sock->sk->sk_no_check_tx); + if (IS_ERR(skb)) + return PTR_ERR(skb); min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len + GENEVE_BASE_HLEN + opt_len + sizeof(struct iphdr) + (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0); err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) + if (unlikely(err)) { + kfree_skb(skb); return err; + } skb = vlan_hwaccel_push_inside(skb); if (unlikely(!skb)) diff --git a/net/openvswitch/vport-geneve.c b/net/openvswitch/vport-geneve.c index 347fa23..484864d 100644 --- a/net/openvswitch/vport-geneve.c +++ b/net/openvswitch/vport-geneve.c @@ -219,7 +219,10 @@ static int geneve_tnl_send(struct vport *vport, struct sk_buff *skb) false); if (err < 0) ip_rt_put(rt); + return err; + error: + kfree_skb(skb); return err; } diff --git a/net/openvswitch/vport-gre.c b/net/openvswitch/vport-gre.c index 6b69df5..28f54e9 100644 --- a/net/openvswitch/vport-gre.c +++ b/net/openvswitch/vport-gre.c @@ -73,7 +73,7 @@ static struct sk_buff *__build_header(struct sk_buff *skb, skb = gre_handle_offloads(skb, !!(tun_key->tun_flags & TUNNEL_CSUM)); if (IS_ERR(skb)) - return NULL; + return skb; tpi.flags = filter_tnl_flags(tun_key->tun_flags); tpi.proto = htons(ETH_P_TEB); @@ -144,7 +144,7 @@ static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) if (unlikely(!OVS_CB(skb)->egress_tun_info)) { err = -EINVAL; - goto error; + goto err_free_skb; } tun_key = &OVS_CB(skb)->egress_tun_info->tunnel; @@ -157,8 +157,10 @@ static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) fl.flowi4_proto = IPPROTO_GRE; rt = ip_route_output_key(net, &fl); - if (IS_ERR(rt)) - return PTR_ERR(rt); + if (IS_ERR(rt)) { + err = PTR_ERR(rt); + goto err_free_skb; + } tunnel_hlen = ip_gre_calc_hlen(tun_key->tun_flags); @@ -183,8 +185,9 @@ static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) /* Push Tunnel header. */ skb = __build_header(skb, tunnel_hlen); - if (unlikely(!skb)) { - err = 0; + if (IS_ERR(skb)) { + err = PTR_ERR(rt); + skb = NULL; goto err_free_rt; } @@ -198,7 +201,8 @@ static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) tun_key->ipv4_tos, tun_key->ipv4_ttl, df, false); err_free_rt: ip_rt_put(rt); -error: +err_free_skb: + kfree_skb(skb); return err; } diff --git a/net/openvswitch/vport-vxlan.c b/net/openvswitch/vport-vxlan.c index 38f95a5..d7c46b3 100644 --- a/net/openvswitch/vport-vxlan.c +++ b/net/openvswitch/vport-vxlan.c @@ -187,7 +187,9 @@ static int vxlan_tnl_send(struct vport *vport, struct sk_buff *skb) false); if (err < 0) ip_rt_put(rt); + return err; error: + kfree_skb(skb); return err; } diff --git a/net/openvswitch/vport.c b/net/openvswitch/vport.c index 9584526..53f3ebb 100644 --- a/net/openvswitch/vport.c +++ b/net/openvswitch/vport.c @@ -519,10 +519,9 @@ int ovs_vport_send(struct vport *vport, struct sk_buff *skb) u64_stats_update_end(&stats->syncp); } else if (sent < 0) { ovs_vport_record_error(vport, VPORT_E_TX_ERROR); - kfree_skb(skb); - } else + } else { ovs_vport_record_error(vport, VPORT_E_TX_DROPPED); - + } return sent; } -- cgit v1.1 From 74f47278cb056ffe1d261df3e094d608c3569829 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:36 -0800 Subject: vxlan: Fix double free of skb. In case of error vxlan_xmit_one() can free already freed skb. Also fixes memory leak of dst-entry. Fixes: acbf74a7630 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 49d9f22..7fbd89f 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1579,8 +1579,10 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, bool udp_sum = !udp_get_no_check6_tx(vs->sock->sk); skb = udp_tunnel_handle_offloads(skb, udp_sum); - if (IS_ERR(skb)) - return -EINVAL; + if (IS_ERR(skb)) { + err = -EINVAL; + goto err; + } skb_scrub_packet(skb, xnet); @@ -1590,12 +1592,16 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) - return err; + if (unlikely(err)) { + kfree_skb(skb); + goto err; + } skb = vlan_hwaccel_push_inside(skb); - if (WARN_ON(!skb)) - return -ENOMEM; + if (WARN_ON(!skb)) { + err = -ENOMEM; + goto err; + } vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh)); vxh->vx_flags = htonl(VXLAN_FLAGS); @@ -1606,6 +1612,9 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, udp_tunnel6_xmit_skb(vs->sock, dst, skb, dev, saddr, daddr, prio, ttl, src_port, dst_port); return 0; +err: + dst_release(dst); + return err; } #endif @@ -1621,7 +1630,7 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, skb = udp_tunnel_handle_offloads(skb, udp_sum); if (IS_ERR(skb)) - return -EINVAL; + return PTR_ERR(skb); min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len + VXLAN_HLEN + sizeof(struct iphdr) @@ -1629,8 +1638,10 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) + if (unlikely(err)) { + kfree_skb(skb); return err; + } skb = vlan_hwaccel_push_inside(skb); if (WARN_ON(!skb)) @@ -1776,9 +1787,12 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, tos, ttl, df, src_port, dst_port, htonl(vni << 8), !net_eq(vxlan->net, dev_net(vxlan->dev))); - - if (err < 0) + if (err < 0) { + /* skb is already freed. */ + skb = NULL; goto rt_tx_error; + } + iptunnel_xmit_stats(err, &dev->stats, dev->tstats); #if IS_ENABLED(CONFIG_IPV6) } else { -- cgit v1.1 From 796f2da81bead71ffc91ef70912cd8d1827bf756 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 22 Dec 2014 19:04:14 +0900 Subject: net: Fix stacked vlan offload features computation When vlan tags are stacked, it is very likely that the outer tag is stored in skb->vlan_tci and skb->protocol shows the inner tag's vlan_proto. Currently netif_skb_features() first looks at skb->protocol even if there is the outer tag in vlan_tci, thus it incorrectly retrieves the protocol encapsulated by the inner vlan instead of the inner vlan protocol. This allows GSO packets to be passed to HW and they end up being corrupted. Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- net/core/dev.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 67b6210..bd44e28 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2570,11 +2570,14 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) if (gso_segs > dev->gso_max_segs || gso_segs < dev->gso_min_segs) features &= ~NETIF_F_GSO_MASK; - if (protocol == htons(ETH_P_8021Q) || protocol == htons(ETH_P_8021AD)) { - struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; - protocol = veh->h_vlan_encapsulated_proto; - } else if (!vlan_tx_tag_present(skb)) { - return harmonize_features(skb, features); + if (!vlan_tx_tag_present(skb)) { + if (unlikely(protocol == htons(ETH_P_8021Q) || + protocol == htons(ETH_P_8021AD))) { + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; + protocol = veh->h_vlan_encapsulated_proto; + } else { + return harmonize_features(skb, features); + } } features = netdev_intersect_features(features, -- cgit v1.1 From b8fb4e0648a2ab3734140342002f68fb0c7d1602 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 23 Dec 2014 01:13:18 +0100 Subject: net: Reset secmark when scrubbing packet skb_scrub_packet() is called when a packet switches between a context such as between underlay and overlay, between namespaces, or between L3 subnets. While we already scrub the packet mark, connection tracking entry, and cached destination, the security mark/context is left intact. It seems wrong to inherit the security context of a packet when going from overlay to underlay or across forwarding paths. Signed-off-by: Thomas Graf Acked-by: Flavio Leitner Signed-off-by: David S. Miller --- net/core/skbuff.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ae13ef6..395c15b 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4148,6 +4148,7 @@ void skb_scrub_packet(struct sk_buff *skb, bool xnet) skb->ignore_df = 0; skb_dst_drop(skb); skb->mark = 0; + skb_init_secmark(skb); secpath_reset(skb); nf_reset(skb); nf_reset_trace(skb); -- cgit v1.1 From dddd60220f41775e634258efd1b54c6fa81ce706 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 22 Dec 2014 19:10:17 +0100 Subject: ipw2200: select CFG80211_WEXT Commit 24a0aa212ee2 ("cfg80211: make WEXT compatibility unselectable") made it impossible to depend on CFG80211_WEXT. It does still allow to select that symbol. (Yes, the commit summary is confusing.) So make IPW2200 select CFG80211_WEXT, so that the ipw2200 driver can be enabled in config again. Signed-off-by: Paul Bolle Signed-off-by: Kalle Valo --- drivers/net/wireless/ipw2x00/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig index 91c0cb3..21de4fe 100644 --- a/drivers/net/wireless/ipw2x00/Kconfig +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -65,7 +65,8 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && CFG80211 && CFG80211_WEXT + depends on PCI && CFG80211 + select CFG80211_WEXT select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV -- cgit v1.1 From 8975842bed0840f314281c9fbf021a1d29537cf0 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 23 Dec 2014 16:48:32 +0200 Subject: brcmfmac: Do not crash if platform data is not populated The driver looks for pdata->oob_irq_supported to find out if wowl can be supported. However, not all platforms populate pdata in which case we crash the kernel because of NULL pointer dereference. Fixes: 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") Reported-by: Christophe Prigent Signed-off-by: Mika Westerberg Signed-off-by: Kalle Valo --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 3c06e93..9880dae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -1070,7 +1070,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, */ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || - (sdiodev->pdata->oob_irq_supported))) + (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) bus_if->wowl_supported = true; #endif @@ -1167,7 +1167,7 @@ static int brcmf_ops_sdio_resume(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; brcmf_dbg(SDIO, "Enter\n"); - if (sdiodev->pdata->oob_irq_supported) + if (sdiodev->pdata && sdiodev->pdata->oob_irq_supported) disable_irq_wake(sdiodev->pdata->oob_irq_nr); brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); atomic_set(&sdiodev->suspend, false); -- cgit v1.1 From 8bfe8442ff20fdc2d965c197103d935a99bd3296 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Dec 2014 23:10:48 +0100 Subject: Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR When controllers set the HCI_QUIRK_INVALID_BDADDR flag, it is required by userspace to program a valid public Bluetooth device address into the controller before it can be used. After successful address configuration, the internal state changes and the controller runs the complete initialization procedure. However one small difference is that this is no longer the HCI_SETUP stage. The HCI_SETUP stage is only valid during initial controller setup. In this case the stack runs the initialization as part of the HCI_CONFIG stage. The controller version information, default name and supported commands are only stored during HCI_SETUP. While these information are static, they are not read initially when HCI_QUIRK_INVALID_BDADDR is set. So when running in HCI_CONFIG state, these information need to be updated as well. This especially impacts Bluetooth 4.1 and later controllers using extended feature pages and second event mask page. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org # 3.17+ --- net/bluetooth/hci_event.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 39a5c8a..c03d4b0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -242,7 +242,8 @@ static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb) if (rp->status) return; - if (test_bit(HCI_SETUP, &hdev->dev_flags)) + if (test_bit(HCI_SETUP, &hdev->dev_flags) || + test_bit(HCI_CONFIG, &hdev->dev_flags)) memcpy(hdev->dev_name, rp->name, HCI_MAX_NAME_LENGTH); } @@ -509,7 +510,8 @@ static void hci_cc_read_local_version(struct hci_dev *hdev, struct sk_buff *skb) if (rp->status) return; - if (test_bit(HCI_SETUP, &hdev->dev_flags)) { + if (test_bit(HCI_SETUP, &hdev->dev_flags) || + test_bit(HCI_CONFIG, &hdev->dev_flags)) { hdev->hci_ver = rp->hci_ver; hdev->hci_rev = __le16_to_cpu(rp->hci_rev); hdev->lmp_ver = rp->lmp_ver; @@ -528,7 +530,8 @@ static void hci_cc_read_local_commands(struct hci_dev *hdev, if (rp->status) return; - if (test_bit(HCI_SETUP, &hdev->dev_flags)) + if (test_bit(HCI_SETUP, &hdev->dev_flags) || + test_bit(HCI_CONFIG, &hdev->dev_flags)) memcpy(hdev->commands, rp->commands, sizeof(hdev->commands)); } -- cgit v1.1 From 6a8fc95c87110a466ee81675b41170b963f82bdb Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 24 Dec 2014 20:43:11 +0200 Subject: Bluetooth: Fix accepting connections when not using mgmt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When connectable mode is enabled (page scan on) through some non-mgmt method the HCI_CONNECTABLE flag will not be set. For backwards compatibility with user space versions not using mgmt we should not require HCI_CONNECTABLE to be set if HCI_MGMT is not set. Reported-by: Pali Rohár Tested-by: Pali Rohár Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org # 3.17+ --- net/bluetooth/hci_event.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index c03d4b0..3f2e8b8 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2197,7 +2197,12 @@ static void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *skb) return; } - if (!test_bit(HCI_CONNECTABLE, &hdev->dev_flags) && + /* Require HCI_CONNECTABLE or a whitelist entry to accept the + * connection. These features are only touched through mgmt so + * only do the checks if HCI_MGMT is set. + */ + if (test_bit(HCI_MGMT, &hdev->dev_flags) && + !test_bit(HCI_CONNECTABLE, &hdev->dev_flags) && !hci_bdaddr_list_lookup(&hdev->whitelist, &ev->bdaddr, BDADDR_BREDR)) { hci_reject_conn(hdev, &ev->bdaddr); -- cgit v1.1 From 4aa6118811c09c75f508f3f070328c71292f1ce4 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 24 Dec 2014 14:41:39 +0800 Subject: openvswitch: fix odd_ptr_err.cocci warnings net/openvswitch/vport-gre.c:188:5-11: inconsistent IS_ERR and PTR_ERR, PTR_ERR on line 189 PTR_ERR should access the value just tested by IS_ERR Semantic patch information: There can be false positives in the patch case, where it is the call IS_ERR that is wrong. Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci CC: Pravin B Shelar Signed-off-by: Fengguang Wu Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/vport-gre.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/openvswitch/vport-gre.c b/net/openvswitch/vport-gre.c index 28f54e9..d4168c4 100644 --- a/net/openvswitch/vport-gre.c +++ b/net/openvswitch/vport-gre.c @@ -186,7 +186,7 @@ static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) /* Push Tunnel header. */ skb = __build_header(skb, tunnel_hlen); if (IS_ERR(skb)) { - err = PTR_ERR(rt); + err = PTR_ERR(skb); skb = NULL; goto err_free_rt; } -- cgit v1.1 From 2c26d34bbcc0b3f30385d5587aa232289e2eed8e Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 19 Dec 2014 15:32:00 -0800 Subject: net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding When using VXLAN tunnels and a sky2 device, I have experienced checksum failures of the following type: [ 4297.761899] eth0: hw csum failure [...] [ 4297.765223] Call Trace: [ 4297.765224] [] dump_stack+0x46/0x58 [ 4297.765235] [] netdev_rx_csum_fault+0x42/0x50 [ 4297.765238] [] ? skb_push+0x40/0x40 [ 4297.765240] [] __skb_checksum_complete+0xbc/0xd0 [ 4297.765243] [] tcp_v4_rcv+0x2e2/0x950 [ 4297.765246] [] ? ip_rcv_finish+0x360/0x360 These are reliably reproduced in a network topology of: container:eth0 == host(OVS VXLAN on VLAN) == bond0 == eth0 (sky2) -> switch When VXLAN encapsulated traffic is received from a similarly configured peer, the above warning is generated in the receive processing of the encapsulated packet. Note that the warning is associated with the container eth0. The skbs from sky2 have ip_summed set to CHECKSUM_COMPLETE, and because the packet is an encapsulated Ethernet frame, the checksum generated by the hardware includes the inner protocol and Ethernet headers. The receive code is careful to update the skb->csum, except in __dev_forward_skb, as called by dev_forward_skb. __dev_forward_skb calls eth_type_trans, which in turn calls skb_pull_inline(skb, ETH_HLEN) to skip over the Ethernet header, but does not update skb->csum when doing so. This patch resolves the problem by adding a call to skb_postpull_rcsum to update the skb->csum after the call to eth_type_trans. Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index bd44e28..0094562 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1694,6 +1694,7 @@ int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb) skb_scrub_packet(skb, true); skb->protocol = eth_type_trans(skb, dev); + skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); return 0; } -- cgit v1.1 From d0e1df9cf4a98fac8508f1d73d0f3a147d6c2c85 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 23 Dec 2014 12:59:17 +0100 Subject: net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 Use generic config_init callback also for KSZ8021 and KSZ8031. This has been avoided this far due to commit b838b4aced99 ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY becomes unresponsive if the broadcast-disable flag is set before configuring the clock mode. Turns out that the problem seemingly worked-around by the above mentioned commit was really due to a hardware-configuration issue, where the PHY was in fact strapped to address 3 rather than 0. Tested-by: Bruno Thomsen Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index c530de1..3ad8ca7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -88,6 +88,7 @@ struct kszphy_priv { static const struct kszphy_type ksz8021_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_broadcast_disable = true, .has_rmii_ref_clk_sel = true, }; @@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } -static int ksz8021_config_init(struct phy_device *phydev) -{ - int rc; - - rc = kszphy_config_init(phydev); - if (rc) - return rc; - - rc = kszphy_broadcast_disable(phydev); - - return rc < 0 ? rc : 0; -} - static int ksz9021_load_values_from_of(struct phy_device *phydev, struct device_node *of_node, u16 reg, char *field1, char *field2, @@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, -- cgit v1.1 From 16d8614b4f67fad7d12df34c53c9a1bab91fec49 Mon Sep 17 00:00:00 2001 From: Appana Durga Kedareswara Rao Date: Tue, 23 Dec 2014 18:07:55 +0530 Subject: net: xilinx: Remove unnecessary temac_property in the driver This property is no longer used in the code yet the code looks for it in the device tree. It does not cause an error if it's not in the tree. Signed-off-by: Kedareswara rao Appana Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 -- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ---- 2 files changed, 6 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 44b8d2b..4c9b4fa 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -388,7 +388,6 @@ struct axidma_bd { * @dma_err_tasklet: Tasklet structure to process Axi DMA errors * @tx_irq: Axidma TX IRQ number * @rx_irq: Axidma RX IRQ number - * @temac_type: axienet type to identify between soft and hard temac * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X * @options: AxiEthernet option word * @last_link: Phy link state in which the PHY was negotiated earlier @@ -431,7 +430,6 @@ struct axienet_local { int tx_irq; int rx_irq; - u32 temac_type; u32 phy_type; u32 options; /* Current options word */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 4ea2d4e..c18a0c6 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1555,10 +1555,6 @@ static int axienet_of_probe(struct platform_device *op) if ((be32_to_cpup(p)) >= 0x4000) lp->jumbo_support = 1; } - p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", - NULL); - if (p) - lp->temac_type = be32_to_cpup(p); p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); if (p) lp->phy_type = be32_to_cpup(p); -- cgit v1.1 From ef8f342b43c48035458306b5e5b3dcb949929b1d Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 23 Dec 2014 17:50:37 +0100 Subject: neigh: remove next ptr from struct neigh_table After commit d7480fd3b173 ("neigh: remove dynamic neigh table registration support"), this field is not used anymore. CC: Cong Wang Signed-off-by: Nicolas Dichtel Acked-by: Cong Wang Signed-off-by: David S. Miller --- include/net/neighbour.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/net/neighbour.h b/include/net/neighbour.h index eb070b3..76f7084 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -190,7 +190,6 @@ struct neigh_hash_table { struct neigh_table { - struct neigh_table *next; int family; int entry_size; int key_len; -- cgit v1.1 From 6e4ab361b6f3eb41ffe63224a8b5770fc68ef710 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Tue, 23 Dec 2014 18:47:50 +0100 Subject: net: incorrect use of init_completion fixup The second init_completion call should be a reinit_completion here. patch is against 3.18.0 linux-next Signed-off-by: Nicholas Mc Guire Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 7d6aa8c..619083a 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -172,7 +172,7 @@ bnad_get_debug_drvinfo(struct bnad *bnad, void *buffer, u32 len) /* Retrieve flash partition info */ fcomp.comp_status = 0; - init_completion(&fcomp.comp); + reinit_completion(&fcomp.comp); spin_lock_irqsave(&bnad->bna_lock, flags); ret = bfa_nw_flash_get_attr(&bnad->bna.flash, &drvinfo->flash_attr, bnad_cb_completion, &fcomp); -- cgit v1.1 From 5f35227ea34bb616c436d9da47fc325866c428f3 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Tue, 23 Dec 2014 22:37:26 -0800 Subject: net: Generalize ndo_gso_check to ndo_features_check GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert CC: Joe Stringer CC: Eric Dumazet CC: Hayes Wang Signed-off-by: Jesse Gross Acked-by: Tom Herbert Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 ++++--- drivers/net/ethernet/emulex/benet/be_main.c | 8 ++++--- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 10 +++++---- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 ++++--- include/linux/netdevice.h | 20 +++++++++-------- include/net/vxlan.h | 28 ++++++++++++++++++++---- net/core/dev.c | 23 +++++++++++-------- 7 files changed, 70 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 9f5e387..72eef9f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12553,9 +12553,11 @@ static int bnx2x_get_phys_port_id(struct net_device *netdev, return 0; } -static bool bnx2x_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t bnx2x_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } static const struct net_device_ops bnx2x_netdev_ops = { @@ -12589,7 +12591,7 @@ static const struct net_device_ops bnx2x_netdev_ops = { #endif .ndo_get_phys_port_id = bnx2x_get_phys_port_id, .ndo_set_vf_link_state = bnx2x_set_vf_link_state, - .ndo_gso_check = bnx2x_gso_check, + .ndo_features_check = bnx2x_features_check, }; static int bnx2x_set_coherency_mask(struct bnx2x *bp) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 1960731..41a0a54 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4459,9 +4459,11 @@ done: adapter->vxlan_port_count--; } -static bool be_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t be_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -4492,7 +4494,7 @@ static const struct net_device_ops be_netdev_ops = { #ifdef CONFIG_BE2NET_VXLAN .ndo_add_vxlan_port = be_add_vxlan_port, .ndo_del_vxlan_port = be_del_vxlan_port, - .ndo_gso_check = be_gso_check, + .ndo_features_check = be_features_check, #endif }; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 190cbd9..d0d6dc1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2365,9 +2365,11 @@ static void mlx4_en_del_vxlan_port(struct net_device *dev, queue_work(priv->mdev->workqueue, &priv->vxlan_del_task); } -static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -2400,7 +2402,7 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; @@ -2434,7 +2436,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 1aa25b1..9929b97 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -505,9 +505,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev, adapter->flags |= QLCNIC_DEL_VXLAN_PORT; } -static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t qlcnic_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -532,7 +534,7 @@ static const struct net_device_ops qlcnic_netdev_ops = { #ifdef CONFIG_QLCNIC_VXLAN .ndo_add_vxlan_port = qlcnic_add_vxlan_port, .ndo_del_vxlan_port = qlcnic_del_vxlan_port, - .ndo_gso_check = qlcnic_gso_check, + .ndo_features_check = qlcnic_features_check, #endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c31f74d..679e6e90 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1012,12 +1012,15 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev, * Callback to use for xmit over the accelerated station. This * is used in place of ndo_start_xmit on accelerated net * devices. - * bool (*ndo_gso_check) (struct sk_buff *skb, - * struct net_device *dev); + * netdev_features_t (*ndo_features_check) (struct sk_buff *skb, + * struct net_device *dev + * netdev_features_t features); * Called by core transmit path to determine if device is capable of - * performing GSO on a packet. The device returns true if it is - * able to GSO the packet, false otherwise. If the return value is - * false the stack will do software GSO. + * performing offload operations on a given packet. This is to give + * the device an opportunity to implement any restrictions that cannot + * be otherwise expressed by feature flags. The check is called with + * the set of features that the stack has calculated and it returns + * those the driver believes to be appropriate. * * int (*ndo_switch_parent_id_get)(struct net_device *dev, * struct netdev_phys_item_id *psid); @@ -1178,8 +1181,9 @@ struct net_device_ops { struct net_device *dev, void *priv); int (*ndo_get_lock_subclass)(struct net_device *dev); - bool (*ndo_gso_check) (struct sk_buff *skb, - struct net_device *dev); + netdev_features_t (*ndo_features_check) (struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features); #ifdef CONFIG_NET_SWITCHDEV int (*ndo_switch_parent_id_get)(struct net_device *dev, struct netdev_phys_item_id *psid); @@ -3611,8 +3615,6 @@ static inline bool netif_needs_gso(struct net_device *dev, struct sk_buff *skb, netdev_features_t features) { return skb_is_gso(skb) && (!skb_gso_ok(skb, features) || - (dev->netdev_ops->ndo_gso_check && - !dev->netdev_ops->ndo_gso_check(skb, dev)) || unlikely((skb->ip_summed != CHECKSUM_PARTIAL) && (skb->ip_summed != CHECKSUM_UNNECESSARY))); } diff --git a/include/net/vxlan.h b/include/net/vxlan.h index 57cccd0..903461a 100644 --- a/include/net/vxlan.h +++ b/include/net/vxlan.h @@ -1,6 +1,9 @@ #ifndef __NET_VXLAN_H #define __NET_VXLAN_H 1 +#include +#include +#include #include #include #include @@ -51,16 +54,33 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, __be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df, __be16 src_port, __be16 dst_port, __be32 vni, bool xnet); -static inline bool vxlan_gso_check(struct sk_buff *skb) +static inline netdev_features_t vxlan_features_check(struct sk_buff *skb, + netdev_features_t features) { - if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) && + u8 l4_hdr = 0; + + if (!skb->encapsulation) + return features; + + switch (vlan_get_protocol(skb)) { + case htons(ETH_P_IP): + l4_hdr = ip_hdr(skb)->protocol; + break; + case htons(ETH_P_IPV6): + l4_hdr = ipv6_hdr(skb)->nexthdr; + break; + default: + return features;; + } + + if ((l4_hdr == IPPROTO_UDP) && (skb->inner_protocol_type != ENCAP_TYPE_ETHER || skb->inner_protocol != htons(ETH_P_TEB) || (skb_inner_mac_header(skb) - skb_transport_header(skb) != sizeof(struct udphdr) + sizeof(struct vxlanhdr)))) - return false; + return features & ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK); - return true; + return features; } /* IP header + UDP + VXLAN + Ethernet header */ diff --git a/net/core/dev.c b/net/core/dev.c index 0094562..683d493 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2563,7 +2563,7 @@ static netdev_features_t harmonize_features(struct sk_buff *skb, netdev_features_t netif_skb_features(struct sk_buff *skb) { - const struct net_device *dev = skb->dev; + struct net_device *dev = skb->dev; netdev_features_t features = dev->features; u16 gso_segs = skb_shinfo(skb)->gso_segs; __be16 protocol = skb->protocol; @@ -2571,13 +2571,20 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) if (gso_segs > dev->gso_max_segs || gso_segs < dev->gso_min_segs) features &= ~NETIF_F_GSO_MASK; + /* If encapsulation offload request, verify we are testing + * hardware encapsulation features instead of standard + * features for the netdev + */ + if (skb->encapsulation) + features &= dev->hw_enc_features; + if (!vlan_tx_tag_present(skb)) { if (unlikely(protocol == htons(ETH_P_8021Q) || protocol == htons(ETH_P_8021AD))) { struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; protocol = veh->h_vlan_encapsulated_proto; } else { - return harmonize_features(skb, features); + goto finalize; } } @@ -2595,6 +2602,11 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX); +finalize: + if (dev->netdev_ops->ndo_features_check) + features &= dev->netdev_ops->ndo_features_check(skb, dev, + features); + return harmonize_features(skb, features); } EXPORT_SYMBOL(netif_skb_features); @@ -2665,13 +2677,6 @@ static struct sk_buff *validate_xmit_skb(struct sk_buff *skb, struct net_device if (unlikely(!skb)) goto out_null; - /* If encapsulation offload request, verify we are testing - * hardware encapsulation features instead of standard - * features for the netdev - */ - if (skb->encapsulation) - features &= dev->hw_enc_features; - if (netif_needs_gso(dev, skb, features)) { struct sk_buff *segs; -- cgit v1.1 From 02c81ab95d8718d75886d16227a10cc7774493ea Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Dec 2014 18:56:35 +0100 Subject: netlink: rename netlink_unbind() to netlink_undo_bind() The new name is more expressive - this isn't a generic unbind function but rather only a little undo helper for use only in netlink_bind(). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 074cf3e..b4cf8ee 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1410,8 +1410,8 @@ static int netlink_realloc_groups(struct sock *sk) return err; } -static void netlink_unbind(int group, long unsigned int groups, - struct netlink_sock *nlk) +static void netlink_undo_bind(int group, long unsigned int groups, + struct netlink_sock *nlk) { int undo; @@ -1461,7 +1461,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, err = nlk->netlink_bind(group); if (!err) continue; - netlink_unbind(group, groups, nlk); + netlink_undo_bind(group, groups, nlk); return err; } } @@ -1471,7 +1471,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, netlink_insert(sk, net, nladdr->nl_pid) : netlink_autobind(sock); if (err) { - netlink_unbind(nlk->ngroups, groups, nlk); + netlink_undo_bind(nlk->ngroups, groups, nlk); return err; } } -- cgit v1.1 From f8403a2e47afb37bcd3b7e286996d138a116c39d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Dec 2014 18:56:36 +0100 Subject: genetlink: pass only network namespace to genl_has_listeners() There's no point to force the caller to know about the internal genl_sock to use inside struct net, just have them pass the network namespace. This doesn't really change code generation since it's an inline, but makes the caller less magic - there's never any reason to pass another socket. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/net/genetlink.h | 4 ++-- net/openvswitch/datapath.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/net/genetlink.h b/include/net/genetlink.h index af10c2c..38620da 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -395,11 +395,11 @@ static inline int genl_set_err(struct genl_family *family, struct net *net, } static inline int genl_has_listeners(struct genl_family *family, - struct sock *sk, unsigned int group) + struct net *net, unsigned int group) { if (WARN_ON_ONCE(group >= family->n_mcgrps)) return -EINVAL; group = family->mcgrp_offset + group; - return netlink_has_listeners(sk, group); + return netlink_has_listeners(net->genl_sock, group); } #endif /* __NET_GENERIC_NETLINK_H */ diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 332b5a0..4e9a5f0 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -83,8 +83,7 @@ static bool ovs_must_notify(struct genl_family *family, struct genl_info *info, unsigned int group) { return info->nlhdr->nlmsg_flags & NLM_F_ECHO || - genl_has_listeners(family, genl_info_net(info)->genl_sock, - group); + genl_has_listeners(family, genl_info_net(info), group); } static void ovs_notify(struct genl_family *family, -- cgit v1.1 From b10dcb3b94010e3ac3951f68789400b1665effb1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Dec 2014 18:56:37 +0100 Subject: netlink: update listeners directly when removing socket The code is now confusing to read - first in one function down (netlink_remove) any group subscriptions are implicitly removed by calling __sk_del_bind_node(), but the subscriber database is only updated far later by calling netlink_update_listeners(). Move the latter call to just after removal from the list so it is easier to follow the code. This also enables moving the locking inside the kernel-socket conditional, which improves the normal socket destruction path. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index b4cf8ee..6a9fb7c 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1091,8 +1091,10 @@ static void netlink_remove(struct sock *sk) mutex_unlock(&nl_sk_hash_lock); netlink_table_grab(); - if (nlk_sk(sk)->subscriptions) + if (nlk_sk(sk)->subscriptions) { __sk_del_bind_node(sk); + netlink_update_listeners(sk); + } netlink_table_ungrab(); } @@ -1226,8 +1228,8 @@ static int netlink_release(struct socket *sock) module_put(nlk->module); - netlink_table_grab(); if (netlink_is_kernel(sk)) { + netlink_table_grab(); BUG_ON(nl_table[sk->sk_protocol].registered == 0); if (--nl_table[sk->sk_protocol].registered == 0) { struct listeners *old; @@ -1241,10 +1243,8 @@ static int netlink_release(struct socket *sock) nl_table[sk->sk_protocol].flags = 0; nl_table[sk->sk_protocol].registered = 0; } - } else if (nlk->subscriptions) { - netlink_update_listeners(sk); + netlink_table_ungrab(); } - netlink_table_ungrab(); kfree(nlk->groups); nlk->groups = NULL; -- cgit v1.1 From 7d68536bed72b09de03b07479dd707c5831b3b94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Dec 2014 18:56:38 +0100 Subject: netlink: call unbind when releasing socket Currently, netlink_unbind() is only called when the socket explicitly unbinds, which limits its usefulness (luckily there are no users of it yet anyway.) Call netlink_unbind() also when a socket is released, so it becomes possible to track listeners with this callback and without also implementing a netlink notifier (and checking netlink_has_listeners() in there.) Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 6a9fb7c..f29b63f 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1246,6 +1246,13 @@ static int netlink_release(struct socket *sock) netlink_table_ungrab(); } + if (nlk->netlink_unbind) { + int i; + + for (i = 0; i < nlk->ngroups; i++) + if (test_bit(i, nlk->groups)) + nlk->netlink_unbind(i + 1); + } kfree(nlk->groups); nlk->groups = NULL; -- cgit v1.1 From c380d9a7afff0e4c2e5f3c1c2dc7d2f4214dd962 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 23 Dec 2014 20:54:40 +0100 Subject: genetlink: pass multicast bind/unbind to families In order to make the newly fixed multicast bind/unbind functionality in generic netlink, pass them down to the appropriate family. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/net/genetlink.h | 5 +++++ net/netlink/genetlink.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) diff --git a/include/net/genetlink.h b/include/net/genetlink.h index 38620da..3ed31e5 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -31,6 +31,9 @@ struct genl_info; * do additional, common, filtering and return an error * @post_doit: called after an operation's doit callback, it may * undo operations done by pre_doit, for example release locks + * @mcast_bind: a socket bound to the given multicast group (which + * is given as the offset into the groups array) + * @mcast_unbind: a socket was unbound from the given multicast group * @attrbuf: buffer to store parsed attributes * @family_list: family list * @mcgrps: multicast groups used by this family (private) @@ -53,6 +56,8 @@ struct genl_family { void (*post_doit)(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info); + int (*mcast_bind)(int group); + void (*mcast_unbind)(int group); struct nlattr ** attrbuf; /* private */ const struct genl_ops * ops; /* private */ const struct genl_multicast_group *mcgrps; /* private */ diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 76393f2..05bf40b 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -983,11 +983,70 @@ static struct genl_multicast_group genl_ctrl_groups[] = { { .name = "notify", }, }; +static int genl_bind(int group) +{ + int i, err; + bool found = false; + + down_read(&cb_lock); + for (i = 0; i < GENL_FAM_TAB_SIZE; i++) { + struct genl_family *f; + + list_for_each_entry(f, genl_family_chain(i), family_list) { + if (group >= f->mcgrp_offset && + group < f->mcgrp_offset + f->n_mcgrps) { + int fam_grp = group - f->mcgrp_offset; + + if (f->mcast_bind) + err = f->mcast_bind(fam_grp); + else + err = 0; + found = true; + break; + } + } + } + up_read(&cb_lock); + + if (WARN_ON(!found)) + err = 0; + + return err; +} + +static void genl_unbind(int group) +{ + int i; + bool found = false; + + down_read(&cb_lock); + for (i = 0; i < GENL_FAM_TAB_SIZE; i++) { + struct genl_family *f; + + list_for_each_entry(f, genl_family_chain(i), family_list) { + if (group >= f->mcgrp_offset && + group < f->mcgrp_offset + f->n_mcgrps) { + int fam_grp = group - f->mcgrp_offset; + + if (f->mcast_unbind) + f->mcast_unbind(fam_grp); + found = true; + break; + } + } + } + up_read(&cb_lock); + + WARN_ON(!found); +} + static int __net_init genl_pernet_init(struct net *net) { struct netlink_kernel_cfg cfg = { .input = genl_rcv, .flags = NL_CFG_F_NONROOT_RECV, + .bind = genl_bind, + .unbind = genl_unbind, }; /* we'll bump the group number right afterwards */ -- cgit v1.1 From a22a9e4141474b9f314947f159817050a1db58d8 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 23 Dec 2014 09:24:36 +0800 Subject: bonding: change error message to debug message in __bond_release_one() In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang Acked-by: Ding Tianhong Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 184c434..0dceba1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1648,7 +1648,7 @@ static int __bond_release_one(struct net_device *bond_dev, /* slave is not a slave or master is not master of this slave */ if (!(slave_dev->flags & IFF_SLAVE) || !netdev_has_upper_dev(slave_dev, bond_dev)) { - netdev_err(bond_dev, "cannot release %s\n", + netdev_dbg(bond_dev, "cannot release %s\n", slave_dev->name); return -EINVAL; } -- cgit v1.1 From eb69c5bf8273edbe1c5c748fa299b5e5a08f35d6 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 23 Dec 2014 11:29:03 +0800 Subject: ne2k-pci: Add pci_disable_device in error handling For linux-3.18.0 The driver lacks pci_disable_device in error handling code of ne2k_pci_init_one, so the device enabled by pci_enable_device is not disabled when errors occur. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/ne2k-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index 89c8d9f..57e9791 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -246,13 +246,13 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); - return -ENODEV; + goto err_out; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); - return -EBUSY; + goto err_out; } reg0 = inb(ioaddr); @@ -392,6 +392,8 @@ err_out_free_netdev: free_netdev (dev); err_out_free_res: release_region (ioaddr, NE_IO_EXTENT); +err_out: + pci_disable_device(pdev); return -ENODEV; } -- cgit v1.1 From 023e2cfa36c31b0ad28c159a1bb0d61ff57334c8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 23 Dec 2014 21:00:06 +0100 Subject: netlink/genetlink: pass network namespace to bind/unbind Netlink families can exist in multiple namespaces, and for the most part multicast subscriptions are per network namespace. Thus it only makes sense to have bind/unbind notifications per network namespace. To achieve this, pass the network namespace of a given client socket to the bind/unbind functions. Also do this in generic netlink, and there also make sure that any bind for multicast groups that only exist in init_net is rejected. This isn't really a problem if it is accepted since a client in a different namespace will never receive any notifications from such a group, but it can confuse the family if not rejected (it's also possible to silently (without telling the family) accept it, but it would also have to be ignored on unbind so families that take any kind of action on bind/unbind won't do unnecessary work for invalid clients like that. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/netlink.h | 4 ++-- include/net/genetlink.h | 4 ++-- kernel/audit.c | 2 +- net/netfilter/nfnetlink.c | 2 +- net/netlink/af_netlink.c | 21 +++++++++++---------- net/netlink/af_netlink.h | 8 ++++---- net/netlink/genetlink.c | 12 +++++++----- 7 files changed, 28 insertions(+), 25 deletions(-) diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 9e572da..02fc86d 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -46,8 +46,8 @@ struct netlink_kernel_cfg { unsigned int flags; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; - int (*bind)(int group); - void (*unbind)(int group); + int (*bind)(struct net *net, int group); + void (*unbind)(struct net *net, int group); bool (*compare)(struct net *net, struct sock *sk); }; diff --git a/include/net/genetlink.h b/include/net/genetlink.h index 3ed31e5..8412508 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -56,8 +56,8 @@ struct genl_family { void (*post_doit)(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info); - int (*mcast_bind)(int group); - void (*mcast_unbind)(int group); + int (*mcast_bind)(struct net *net, int group); + void (*mcast_unbind)(struct net *net, int group); struct nlattr ** attrbuf; /* private */ const struct genl_ops * ops; /* private */ const struct genl_multicast_group *mcgrps; /* private */ diff --git a/kernel/audit.c b/kernel/audit.c index f8f203e..aba9d9f 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1100,7 +1100,7 @@ static void audit_receive(struct sk_buff *skb) } /* Run custom bind function on netlink socket group connect or bind requests. */ -static int audit_bind(int group) +static int audit_bind(struct net *net, int group) { if (!capable(CAP_AUDIT_READ)) return -EPERM; diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 13c2e17..cde4a67 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -463,7 +463,7 @@ static void nfnetlink_rcv(struct sk_buff *skb) } #ifdef CONFIG_MODULES -static int nfnetlink_bind(int group) +static int nfnetlink_bind(struct net *net, int group) { const struct nfnetlink_subsystem *ss; int type; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index f29b63f..84ea76c 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1141,8 +1141,8 @@ static int netlink_create(struct net *net, struct socket *sock, int protocol, struct module *module = NULL; struct mutex *cb_mutex; struct netlink_sock *nlk; - int (*bind)(int group); - void (*unbind)(int group); + int (*bind)(struct net *net, int group); + void (*unbind)(struct net *net, int group); int err = 0; sock->state = SS_UNCONNECTED; @@ -1251,7 +1251,7 @@ static int netlink_release(struct socket *sock) for (i = 0; i < nlk->ngroups; i++) if (test_bit(i, nlk->groups)) - nlk->netlink_unbind(i + 1); + nlk->netlink_unbind(sock_net(sk), i + 1); } kfree(nlk->groups); nlk->groups = NULL; @@ -1418,8 +1418,9 @@ static int netlink_realloc_groups(struct sock *sk) } static void netlink_undo_bind(int group, long unsigned int groups, - struct netlink_sock *nlk) + struct sock *sk) { + struct netlink_sock *nlk = nlk_sk(sk); int undo; if (!nlk->netlink_unbind) @@ -1427,7 +1428,7 @@ static void netlink_undo_bind(int group, long unsigned int groups, for (undo = 0; undo < group; undo++) if (test_bit(undo, &groups)) - nlk->netlink_unbind(undo); + nlk->netlink_unbind(sock_net(sk), undo); } static int netlink_bind(struct socket *sock, struct sockaddr *addr, @@ -1465,10 +1466,10 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, for (group = 0; group < nlk->ngroups; group++) { if (!test_bit(group, &groups)) continue; - err = nlk->netlink_bind(group); + err = nlk->netlink_bind(net, group); if (!err) continue; - netlink_undo_bind(group, groups, nlk); + netlink_undo_bind(group, groups, sk); return err; } } @@ -1478,7 +1479,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, netlink_insert(sk, net, nladdr->nl_pid) : netlink_autobind(sock); if (err) { - netlink_undo_bind(nlk->ngroups, groups, nlk); + netlink_undo_bind(nlk->ngroups, groups, sk); return err; } } @@ -2129,7 +2130,7 @@ static int netlink_setsockopt(struct socket *sock, int level, int optname, if (!val || val - 1 >= nlk->ngroups) return -EINVAL; if (optname == NETLINK_ADD_MEMBERSHIP && nlk->netlink_bind) { - err = nlk->netlink_bind(val); + err = nlk->netlink_bind(sock_net(sk), val); if (err) return err; } @@ -2138,7 +2139,7 @@ static int netlink_setsockopt(struct socket *sock, int level, int optname, optname == NETLINK_ADD_MEMBERSHIP); netlink_table_ungrab(); if (optname == NETLINK_DROP_MEMBERSHIP && nlk->netlink_unbind) - nlk->netlink_unbind(val); + nlk->netlink_unbind(sock_net(sk), val); err = 0; break; diff --git a/net/netlink/af_netlink.h b/net/netlink/af_netlink.h index b20a173..f123a88 100644 --- a/net/netlink/af_netlink.h +++ b/net/netlink/af_netlink.h @@ -39,8 +39,8 @@ struct netlink_sock { struct mutex *cb_mutex; struct mutex cb_def_mutex; void (*netlink_rcv)(struct sk_buff *skb); - int (*netlink_bind)(int group); - void (*netlink_unbind)(int group); + int (*netlink_bind)(struct net *net, int group); + void (*netlink_unbind)(struct net *net, int group); struct module *module; #ifdef CONFIG_NETLINK_MMAP struct mutex pg_vec_lock; @@ -65,8 +65,8 @@ struct netlink_table { unsigned int groups; struct mutex *cb_mutex; struct module *module; - int (*bind)(int group); - void (*unbind)(int group); + int (*bind)(struct net *net, int group); + void (*unbind)(struct net *net, int group); bool (*compare)(struct net *net, struct sock *sock); int registered; }; diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 05bf40b..91566ed 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -983,7 +983,7 @@ static struct genl_multicast_group genl_ctrl_groups[] = { { .name = "notify", }, }; -static int genl_bind(int group) +static int genl_bind(struct net *net, int group) { int i, err; bool found = false; @@ -997,8 +997,10 @@ static int genl_bind(int group) group < f->mcgrp_offset + f->n_mcgrps) { int fam_grp = group - f->mcgrp_offset; - if (f->mcast_bind) - err = f->mcast_bind(fam_grp); + if (!f->netnsok && net != &init_net) + err = -ENOENT; + else if (f->mcast_bind) + err = f->mcast_bind(net, fam_grp); else err = 0; found = true; @@ -1014,7 +1016,7 @@ static int genl_bind(int group) return err; } -static void genl_unbind(int group) +static void genl_unbind(struct net *net, int group) { int i; bool found = false; @@ -1029,7 +1031,7 @@ static void genl_unbind(int group) int fam_grp = group - f->mcgrp_offset; if (f->mcast_unbind) - f->mcast_unbind(fam_grp); + f->mcast_unbind(net, fam_grp); found = true; break; } -- cgit v1.1 From dc97a1a9477f969e34b38ca9d9cd231cb93ebea2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 29 Dec 2014 16:31:49 -0500 Subject: genetlink: A genl_bind() to an out-of-range multicast group should not WARN(). Users can request to bind to arbitrary multicast groups, so warning when the requested group number is out of range is not appropriate. And with the warning removed, and the 'err' variable properly given an initial value, we can remove 'found' altogether. Reported-by: Sedat Dilek Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 91566ed..2e11061e 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -985,8 +985,7 @@ static struct genl_multicast_group genl_ctrl_groups[] = { static int genl_bind(struct net *net, int group) { - int i, err; - bool found = false; + int i, err = 0; down_read(&cb_lock); for (i = 0; i < GENL_FAM_TAB_SIZE; i++) { @@ -1003,16 +1002,12 @@ static int genl_bind(struct net *net, int group) err = f->mcast_bind(net, fam_grp); else err = 0; - found = true; break; } } } up_read(&cb_lock); - if (WARN_ON(!found)) - err = 0; - return err; } -- cgit v1.1