From 1073af33fdd4e960c70b828e899b1291b44f0b3d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20B=C3=A4chler?= Date: Fri, 2 Jul 2010 10:44:23 +0200 Subject: gpu/drm/i915: Add a blacklist to omit modeset on LID open MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On some machines (currently only the Toshiba Tecra A11 is known), the GPU locks up when modeset is forced on LID open. This patch adds a new DMI blacklist and omits modesetting for all matches. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15550 Signed-off-by: Thomas Bächler Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 31df55f..0eab8df 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -599,6 +599,26 @@ static int intel_lvds_get_modes(struct drm_connector *connector) return 0; } +static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident); + return 1; +} + +/* The GPU hangs up on these systems if modeset is performed on LID open */ +static const struct dmi_system_id intel_no_modeset_on_lid[] = { + { + .callback = intel_no_modeset_on_lid_dmi_callback, + .ident = "Toshiba Tecra A11", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"), + }, + }, + + { } /* terminating entry */ +}; + /* * Lid events. Note the use of 'modeset_on_lid': * - we set it on lid close, and reset it on open @@ -622,6 +642,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, */ if (connector) connector->status = connector->funcs->detect(connector); + /* Don't force modeset on machines where it causes a GPU lockup */ + if (dmi_check_system(intel_no_modeset_on_lid)) + return NOTIFY_OK; if (!acpi_lid_open()) { dev_priv->modeset_on_lid = 1; return NOTIFY_OK; -- cgit v1.1 From 6f772d7e2f4105470b9f3d0f0b26f06f61b1278d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 2 Jul 2010 08:57:15 +0100 Subject: drm/i915: Explosion following OOM in do_execbuffer. Oops, when merging the extra details following an OOM, I missed that driver_private is now NULL and the correct way to convert from the drm_gem_object into the drm_i915_gem_object is to use to_intel_bo(). BUG: unable to handle kernel NULL pointer dereference at 00000069 IP: [] i915_gem_do_execbuffer+0x71f/0xbb6 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/vc/vcsa3/uevent Pid: 10993, comm: X Not tainted 2.6.35-rc2+ #67 / EIP: 0060:[] EFLAGS: 00213202 CPU: 0 EIP is at i915_gem_do_execbuffer+0x71f/0xbb6 EAX: f647e8a8 EBX: 00000000 ECX: 00000003 EDX: 00000000 ESI: 00424000 EDI: 00000000 EBP: f6508e48 ESP: f6508dd4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process X (pid: 10993, ti=f6508000 task=f6432880 task.ti=f6508000) Stack: f6508de0 f7130000 00000001 00000000 00000000 f647e8a8 00000000 f64f8480 <0> f7974414 00000000 00000006 00000000 00000000 f6578000 00000008 00000006 <0> f6797880 00400000 00000000 ffffffe4 f7974400 000000d0 000000d0 000001c0 Call Trace: [] ? i915_gem_execbuffer2+0xa1/0xe7 [] ? drm_ioctl+0x22c/0x2fa [] ? i915_gem_execbuffer2+0x0/0xe7 [] ? do_sync_read+0x8f/0xca [] ? vfs_ioctl+0x2c/0x96 [] ? drm_ioctl+0x0/0x2fa [] ? do_vfs_ioctl+0x429/0x45a [] ? fsnotify_access+0x54/0x5f [] ? vfs_read+0x9a/0xae [] ? sys_ioctl+0x33/0x4d [] ? sysenter_do_call+0x12/0x26 Code: d0 89 4d c4 31 c9 89 45 d8 eb 44 8b 45 cc 8b 14 88 8b 42 50 89 45 bc 8b 45 a0 8b 52 38 89 55 d0 31 d2 f6 40 20 01 74 0d 8b 55 bc 42 69 30 0f 95 c2 0f b6 d2 8b 45 d0 c7 45 d4 00 00 00 00 89 EIP: [] i915_gem_do_execbuffer+0x71f/0xbb6 SS:ESP 0068:f6508dd4 CR2: 0000000000000069 ---[ end trace 3f1d514b34d39381 ]--- Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0743858..eb17cc3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3646,6 +3646,7 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev, return ret; } + int i915_gem_do_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv, @@ -3793,7 +3794,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, unsigned long long total_size = 0; int num_fences = 0; for (i = 0; i < args->buffer_count; i++) { - obj_priv = object_list[i]->driver_private; + obj_priv = to_intel_bo(object_list[i]); total_size += object_list[i]->size; num_fences += -- cgit v1.1 From be9a3dbf65a69933b06011f049b1e2fdfa6bc8b9 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 Jul 2010 12:03:37 -0700 Subject: drm/i915: handle shared framebuffers when flipping If a framebuffer is shared across CRTCs, the x,y position of one of them is likely to be something other than the origin (e.g. for extended desktop configs). So calculate the offset at flip time so such configurations can work. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518. Signed-off-by: Jesse Barnes Tested-by: Thomas M. Tested-by: fangxun Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 68dcf36..ab8162a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4695,7 +4695,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; - unsigned long flags; + unsigned long flags, offset; int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC; int ret, pipesrc; u32 flip_mask; @@ -4762,19 +4762,23 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, while (I915_READ(ISR) & flip_mask) ; + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = obj_priv->gtt_offset; + offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8); + BEGIN_LP_RING(4); if (IS_I965G(dev)) { OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode); + OUT_RING(offset | obj_priv->tiling_mode); pipesrc = I915_READ(pipesrc_reg); OUT_RING(pipesrc & 0x0fff0fff); } else { OUT_RING(MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(obj_priv->gtt_offset); + OUT_RING(offset); OUT_RING(MI_NOOP); } ADVANCE_LP_RING(); -- cgit v1.1 From a392a10367508930607a17ab60b4148f86adf2bc Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 25 Jul 2010 23:09:13 +0100 Subject: drm/i915: Clear any existing dither mode prior to enabling spatial dithering We cannot the initial configuration set by the BIOS not to have a dither mode enabled which conflicts with our enabling the Spatial Temporal 1 dither mode for PCH. In particular, the BIOS may either enable temporal dithering or the Spatial Temporal 2 with the result that we enable pure temporal dithering. Temporal dithering looks bad and is perceived as a flicker. Fixes: Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away after suspend to RAM https://bugs.freedesktop.org/show_bug.cgi?id=29248 Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ab8162a..445fdaf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3736,6 +3736,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (dev_priv->lvds_dither) { if (HAS_PCH_SPLIT(dev)) { pipeconf |= PIPE_ENABLE_DITHER; + pipeconf &= ~PIPE_DITHER_TYPE_MASK; pipeconf |= PIPE_DITHER_TYPE_ST01; } else lvds |= LVDS_ENABLE_DITHER; -- cgit v1.1 From 6ba770dc5c334aff1c055c8728d34656e0f091e2 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Fri, 2 Jul 2010 16:43:30 -0400 Subject: drm/i915: Make G4X-style PLL search more permissive Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC reference clock. More generally, the 0.488% tolerance used before is just too tight to reliably find a PLL setting. I extracted the search algorithm and modified it to find the dot clocks with maximum error over the valid range for the given output type: http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c This gave: Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571) Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524) Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488) Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529) Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488) Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448) Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478) Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449) Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510) Signed-off-by: Adam Jackson Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 445fdaf..f28691f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -862,8 +862,8 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, intel_clock_t clock; int max_n; bool found; - /* approximately equals target * 0.00488 */ - int err_most = (target >> 8) + (target >> 10); + /* approximately equals target * 0.00585 */ + int err_most = (target >> 8) + (target >> 9); found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { -- cgit v1.1 From 4a655f043160eeae447efd3be297b6b4c397a640 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jul 2010 13:18:18 -0700 Subject: drm/i915: add PANEL_UNLOCK_REGS definition In some cases, unlocking the panel regs is safe and can help us avoid a flickery, full mode set sequence. So define the unlock key and use it. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 150400f..c41f945 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2805,6 +2805,7 @@ #define PCH_PP_STATUS 0xc7200 #define PCH_PP_CONTROL 0xc7204 +#define PANEL_UNLOCK_REGS (0xabcd << 16) #define EDP_FORCE_VDD (1 << 3) #define EDP_BLC_ENABLE (1 << 2) #define PANEL_POWER_RESET (1 << 1) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f28691f..6d5477c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4413,7 +4413,8 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule) DRM_DEBUG_DRIVER("upclocking LVDS\n"); /* Unlock panel regs */ - I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16)); + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + PANEL_UNLOCK_REGS); dpll &= ~DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); @@ -4456,7 +4457,8 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) DRM_DEBUG_DRIVER("downclocking LVDS\n"); /* Unlock panel regs */ - I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16)); + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + PANEL_UNLOCK_REGS); dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); -- cgit v1.1 From 9934c132989d5c488d2e15188220ce240960ce96 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jul 2010 13:18:19 -0700 Subject: drm/i915: make sure eDP panel is turned on When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by: Jesse Barnes Tested-by: "Paulo J. S. Silva" Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 53 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1aac59e..5d42661 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -717,6 +717,51 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } +static void ironlake_edp_panel_on (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + u32 pp, pp_status; + + pp_status = I915_READ(PCH_PP_STATUS); + if (pp_status & PP_ON) + return; + + pp = I915_READ(PCH_PP_CONTROL); + pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON; + I915_WRITE(PCH_PP_CONTROL, pp); + do { + pp_status = I915_READ(PCH_PP_STATUS); + } while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout)); + + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status); + + pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD); + I915_WRITE(PCH_PP_CONTROL, pp); +} + +static void ironlake_edp_panel_off (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + u32 pp, pp_status; + + pp = I915_READ(PCH_PP_CONTROL); + pp &= ~POWER_TARGET_ON; + I915_WRITE(PCH_PP_CONTROL, pp); + do { + pp_status = I915_READ(PCH_PP_STATUS); + } while ((pp_status & PP_ON) && !time_after(jiffies, timeout)); + + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("panel off wait timed out\n"); + + /* Make sure VDD is enabled so DP AUX will work */ + pp |= EDP_FORCE_VDD; + I915_WRITE(PCH_PP_CONTROL, pp); +} + static void ironlake_edp_backlight_on (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -751,14 +796,18 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (mode != DRM_MODE_DPMS_ON) { if (dp_reg & DP_PORT_EN) { intel_dp_link_down(intel_encoder, dp_priv->DP); - if (IS_eDP(intel_encoder)) + if (IS_eDP(intel_encoder)) { ironlake_edp_backlight_off(dev); + ironlake_edp_backlight_off(dev); + } } } else { if (!(dp_reg & DP_PORT_EN)) { intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration); - if (IS_eDP(intel_encoder)) + if (IS_eDP(intel_encoder)) { + ironlake_edp_panel_on(dev); ironlake_edp_backlight_on(dev); + } } } dp_priv->dpms_mode = mode; -- cgit v1.1 From 127bd2ac91c3ecf42890ac320f4c65346d110e78 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 23 Jul 2010 23:32:05 +0100 Subject: drm/i915: Use the correct scanout alignment for fbcon. This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 2 +- drivers/gpu/drm/i915/intel_drv.h | 3 +++ drivers/gpu/drm/i915/intel_fb.c | 2 +- 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 6d5477c..a37d4ce 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1255,7 +1255,7 @@ out_disable: } } -static int +int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 72206f3..2f7970b 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -215,6 +215,9 @@ extern void intel_init_clock_gating(struct drm_device *dev); extern void ironlake_enable_drps(struct drm_device *dev); extern void ironlake_disable_drps(struct drm_device *dev); +extern int intel_pin_and_fence_fb_obj(struct drm_device *dev, + struct drm_gem_object *obj); + extern int intel_framebuffer_init(struct drm_device *dev, struct intel_framebuffer *ifb, struct drm_mode_fb_cmd *mode_cmd, diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index c3c5052..0f4946a 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -98,7 +98,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_pin(fbo, 64*1024); + ret = intel_pin_and_fence_fb_obj(dev, fbo); if (ret) { DRM_ERROR("failed to pin fb: %d\n", ret); goto out_unref; -- cgit v1.1 From 9c928d168d4030a230a7a5ee1764721d173f1153 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 Jul 2010 15:20:00 -0700 Subject: drm/i915: disable FBC when more than one pipe is active We're really supposed to do this to avoid trouble with underflows when multiple planes are active. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987. Signed-off-by: Jesse Barnes Tested-by: fangxun Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_debugfs.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++++++ 3 files changed, 19 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index aee83fa..9214119 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -605,6 +605,9 @@ static int i915_fbc_status(struct seq_file *m, void *unused) case FBC_NOT_TILED: seq_printf(m, "scanout buffer not tiled"); break; + case FBC_MULTIPLE_PIPES: + seq_printf(m, "multiple pipes are enabled"); + break; default: seq_printf(m, "unknown reason"); } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d147ab2..1d82de1 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -215,6 +215,7 @@ enum no_fbc_reason { FBC_MODE_TOO_LARGE, /* mode too large for compression */ FBC_BAD_PLANE, /* fbc not supported on plane */ FBC_NOT_TILED, /* buffer not tiled */ + FBC_MULTIPLE_PIPES, /* more than one pipe active */ }; enum intel_pch { diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a37d4ce..30d8daf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1180,8 +1180,12 @@ static void intel_update_fbc(struct drm_crtc *crtc, struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj_priv; + struct drm_crtc *tmp_crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane = intel_crtc->plane; + int crtcs_enabled = 0; + + DRM_DEBUG_KMS("\n"); if (!i915_powersave) return; @@ -1199,10 +1203,21 @@ static void intel_update_fbc(struct drm_crtc *crtc, * If FBC is already on, we just have to verify that we can * keep it that way... * Need to disable if: + * - more than one pipe is active * - changing FBC params (stride, fence, mode) * - new fb is too large to fit in compressed buffer * - going to an unsupported config (interlace, pixel multiply, etc.) */ + list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) { + if (tmp_crtc->enabled) + crtcs_enabled++; + } + DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled); + if (crtcs_enabled > 1) { + DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); + dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; + goto out_disable; + } if (intel_fb->obj->size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " "compression\n"); -- cgit v1.1 From e7b96f28c58ca09f15f6c2e8ccbb889a30fab4f7 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Fri, 9 Jul 2010 14:48:50 -0600 Subject: agp/intel: Use the correct mask to detect i830 aperture size. BugLink: https://bugs.launchpad.net/bugs/597075 commit f1befe71fa7a79ab733011b045639d8d809924ad introduced a regression when detecting aperture size of some i915 adapters, e.g., those on the Intel Q35 chipset. The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733 The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294 According to the specification found at http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config space register I830_GMCH_CTRL is a mirror of GMCH Graphics Control. The correct macro for isolating the aperture size bits is therefore I830_GMCH_GMS_MASK along with the attendant changes to the case statement. Signed-off-by: Tim Gardner Tested-by: Kees Cook Cc: Chris Wilson Cc: Eric Anholt Cc: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/char/agp/intel-gtt.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9344216..a754715 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1216,17 +1216,20 @@ static int intel_i915_get_gtt_size(void) /* G33's GTT size defined in gmch_ctrl */ pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl); - switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) { - case G33_PGETBL_SIZE_1M: + switch (gmch_ctrl & I830_GMCH_GMS_MASK) { + case I830_GMCH_GMS_STOLEN_512: + size = 512; + break; + case I830_GMCH_GMS_STOLEN_1024: size = 1024; break; - case G33_PGETBL_SIZE_2M: - size = 2048; + case I830_GMCH_GMS_STOLEN_8192: + size = 8*1024; break; default: dev_info(&agp_bridge->dev->dev, "unknown page table size 0x%x, assuming 512KB\n", - (gmch_ctrl & G33_PGETBL_SIZE_MASK)); + (gmch_ctrl & I830_GMCH_GMS_MASK)); size = 512; } } else { -- cgit v1.1 From aebf0dafee1a0a22b3d25db8107c6479db4aaebe Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jul 2010 08:12:20 -0700 Subject: drm/i915: don't free non-existent compressed llb on ILK+ We should only free the compressed llb if we allocated it in the first place otherwise we'll panic at unload time. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f00c5ae..2305a12 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1300,7 +1300,7 @@ static void i915_cleanup_compression(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; drm_mm_put_block(dev_priv->compressed_fb); - if (!IS_GM45(dev)) + if (dev_priv->compressed_llb) drm_mm_put_block(dev_priv->compressed_llb); } -- cgit v1.1 From fbd41a7e5843be27386c48b3d0816e93e7865d5d Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Jul 2010 11:58:00 -0700 Subject: drm/i915: fix deadlock in fb teardown At module unload time we'll tear down the fbdev state. We do so under the struct mutex, so we shouldn't try to use the unlocked variant of the GEM object unreference function or we may deadlock. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 0f4946a..3e18c9e 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -236,7 +236,7 @@ int intel_fbdev_destroy(struct drm_device *dev, drm_framebuffer_cleanup(&ifb->base); if (ifb->obj) - drm_gem_object_unreference_unlocked(ifb->obj); + drm_gem_object_unreference(ifb->obj); return 0; } -- cgit v1.1 From 0cc4d4300c28d5c3fc73e5ec91bfd4b0c2c744af Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 17 Jul 2010 12:43:20 +0100 Subject: drm/i915: Fix panel fitting regression since 734b4157 The crtc mode fixup is run after the encoders adjust the mode to fit on their output, so don't reset the mode! Fixes: Bug 29057 - display corruption under 800x600 on netbook (1024x600) with 'Full Aspect' scaling https://bugs.freedesktop.org/show_bug.cgi?id=29057 Signed-off-by: Chris Wilson Cc: Jesse Barnes Tested-by: Xun Fang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 30d8daf..dbd9f09 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2371,8 +2371,6 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, if (mode->clock * 3 > 27000 * 4) return MODE_CLOCK_HIGH; } - - drm_mode_set_crtcinfo(adjusted_mode, 0); return true; } -- cgit v1.1 From b690e96cf9e6a6cde6f0393de47bdd6317ddb5de Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 19 Jul 2010 13:53:12 -0700 Subject: drm/i915: add pipe A force quirks to i915 driver Ported over from the old UMS list. Unfortunately they're still necessary especially on older laptop platforms. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=22126. Tested-by: Xavier Tested-by: Diego Escalante Urrelo Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 4 +++ drivers/gpu/drm/i915/intel_display.c | 69 +++++++++++++++++++++++++++++++++++- 2 files changed, 72 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1d82de1..2e1744d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -223,6 +223,8 @@ enum intel_pch { PCH_CPT, /* Cougarpoint PCH */ }; +#define QUIRK_PIPEA_FORCE (1<<0) + struct intel_fbdev; typedef struct drm_i915_private { @@ -338,6 +340,8 @@ typedef struct drm_i915_private { /* PCH chipset type */ enum intel_pch pch_type; + unsigned long quirks; + /* Register state */ bool modeset_on_lid; u8 saveLBB; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dbd9f09..5e21b31 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2270,6 +2270,11 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) intel_wait_for_vblank(dev); } + /* Don't disable pipe A or pipe A PLLs if needed */ + if (pipeconf_reg == PIPEACONF && + (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + goto skip_pipe_off; + /* Next, disable display pipes */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { @@ -2285,7 +2290,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); I915_READ(dpll_reg); } - + skip_pipe_off: /* Wait for the clocks to turn off. */ udelay(150); break; @@ -5526,6 +5531,66 @@ static void intel_init_display(struct drm_device *dev) } } +/* + * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend, + * resume, or other times. This quirk makes sure that's the case for + * affected systems. + */ +static void quirk_pipea_force (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->quirks |= QUIRK_PIPEA_FORCE; + DRM_DEBUG_DRIVER("applying pipe a force quirk\n"); +} + +struct intel_quirk { + int device; + int subsystem_vendor; + int subsystem_device; + void (*hook)(struct drm_device *dev); +}; + +struct intel_quirk intel_quirks[] = { + /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */ + { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force }, + /* HP Mini needs pipe A force quirk (LP: #322104) */ + { 0x27ae,0x103c, 0x361a, quirk_pipea_force }, + + /* Thinkpad R31 needs pipe A force quirk */ + { 0x3577, 0x1014, 0x0505, quirk_pipea_force }, + /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ + { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, + + /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */ + { 0x3577, 0x1014, 0x0513, quirk_pipea_force }, + /* ThinkPad X40 needs pipe A force quirk */ + + /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ + { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, + + /* 855 & before need to leave pipe A & dpll A up */ + { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, + { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, +}; + +static void intel_init_quirks(struct drm_device *dev) +{ + struct pci_dev *d = dev->pdev; + int i; + + for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) { + struct intel_quirk *q = &intel_quirks[i]; + + if (d->device == q->device && + (d->subsystem_vendor == q->subsystem_vendor || + q->subsystem_vendor == PCI_ANY_ID) && + (d->subsystem_device == q->subsystem_device || + q->subsystem_device == PCI_ANY_ID)) + q->hook(dev); + } +} + void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -5538,6 +5603,8 @@ void intel_modeset_init(struct drm_device *dev) dev->mode_config.funcs = (void *)&intel_mode_funcs; + intel_init_quirks(dev); + intel_init_display(dev); if (IS_I965G(dev)) { -- cgit v1.1