From 2251cf1a4b37bd483501614c2d78f5b8286f20d7 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 4 Sep 2005 22:52:17 +0200 Subject: [PATCH] hwmon: w83627hf: no reset by default Make the reset of the chips in w83627hf optional rather than the default. This reset has been causing trouble several times already. It may even go completely away unless it proves to be useful to at least one user. Closes bug #5168: http://bugzilla.kernel.org/show_bug.cgi?id=5168 Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627hf.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 02bd5c0..3479dc5 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -64,6 +64,10 @@ static unsigned short address; /* Insmod parameters */ enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf }; +static int reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); + static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -1279,7 +1283,15 @@ static void w83627hf_init_client(struct i2c_client *client) int type = data->type; u8 tmp; - if(init) { + if (reset) { + /* Resetting the chip has been the default for a long time, + but repeatedly caused problems (fans going to full + speed...) so it is now optional. It might even go away if + nobody reports it as being useful, as I see very little + reason why this would be needed at all. */ + dev_info(&client->dev, "If reset=1 solved a problem you were " + "having, please report!\n"); + /* save this register */ i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG); /* Reset all except Watchdog values and last conversion values -- cgit v1.1