From 344e62b36d3fa680ffbd35ee26b52f7bf4c1c4ec Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 13 Jul 2015 17:32:27 +0530 Subject: char: misc: remove redundant ifdef The check for CONFIG_PROC_FS is not required as the check is being done in proc_fs.h and incase CONFIG_PROC_FS is not defined then proc_create() is defined as NULL. Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/misc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/char/misc.c b/drivers/char/misc.c index fdb0f9b..3b95795 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -282,9 +282,7 @@ static int __init misc_init(void) { int err; -#ifdef CONFIG_PROC_FS proc_create("misc", 0, NULL, &misc_proc_fops); -#endif misc_class = class_create(THIS_MODULE, "misc"); err = PTR_ERR(misc_class); if (IS_ERR(misc_class)) -- cgit v1.1 From 1037b2787b6df12f31b7051f7cdbb289f7972ee7 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 13 Jul 2015 17:32:28 +0530 Subject: char: misc: fix error path Lets call remove_proc_entry() in the error path only if we have successfully created "misc" in procfs. Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/misc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 3b95795..c83ef96 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -281,8 +281,9 @@ static char *misc_devnode(struct device *dev, umode_t *mode) static int __init misc_init(void) { int err; + struct proc_dir_entry *ret; - proc_create("misc", 0, NULL, &misc_proc_fops); + ret = proc_create("misc", 0, NULL, &misc_proc_fops); misc_class = class_create(THIS_MODULE, "misc"); err = PTR_ERR(misc_class); if (IS_ERR(misc_class)) @@ -298,7 +299,8 @@ fail_printk: printk("unable to get major %d for misc devices\n", MISC_MAJOR); class_destroy(misc_class); fail_remove: - remove_proc_entry("misc", NULL); + if (ret) + remove_proc_entry("misc", NULL); return err; } subsys_initcall(misc_init); -- cgit v1.1 From 14e51e599db0b5bd7d2fc11f144b68c38aa9d0c9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 15:23:17 +0900 Subject: misc: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ad525x_dpot-i2c.c | 1 - drivers/misc/apds990x.c | 1 - drivers/misc/bh1770glc.c | 1 - drivers/misc/bmp085-i2c.c | 1 - drivers/misc/eeprom/at24.c | 1 - drivers/misc/isl29003.c | 1 - drivers/misc/lis3lv02d/lis3lv02d_i2c.c | 1 - drivers/misc/ti-st/st_kim.c | 1 - drivers/misc/tsl2550.c | 1 - 9 files changed, 9 deletions(-) diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c index 705b881..d11187d 100644 --- a/drivers/misc/ad525x_dpot-i2c.c +++ b/drivers/misc/ad525x_dpot-i2c.c @@ -106,7 +106,6 @@ MODULE_DEVICE_TABLE(i2c, ad_dpot_id); static struct i2c_driver ad_dpot_i2c_driver = { .driver = { .name = "ad_dpot", - .owner = THIS_MODULE, }, .probe = ad_dpot_i2c_probe, .remove = ad_dpot_i2c_remove, diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index 3739ffa..a3e789b 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -1275,7 +1275,6 @@ static const struct dev_pm_ops apds990x_pm_ops = { static struct i2c_driver apds990x_driver = { .driver = { .name = "apds990x", - .owner = THIS_MODULE, .pm = &apds990x_pm_ops, }, .probe = apds990x_probe, diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c index b756381..753d7ec 100644 --- a/drivers/misc/bh1770glc.c +++ b/drivers/misc/bh1770glc.c @@ -1396,7 +1396,6 @@ static const struct dev_pm_ops bh1770_pm_ops = { static struct i2c_driver bh1770_driver = { .driver = { .name = "bh1770glc", - .owner = THIS_MODULE, .pm = &bh1770_pm_ops, }, .probe = bh1770_probe, diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c index a7c1629..f35c218 100644 --- a/drivers/misc/bmp085-i2c.c +++ b/drivers/misc/bmp085-i2c.c @@ -66,7 +66,6 @@ MODULE_DEVICE_TABLE(i2c, bmp085_id); static struct i2c_driver bmp085_i2c_driver = { .driver = { - .owner = THIS_MODULE, .name = BMP085_NAME, }, .id_table = bmp085_id, diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2d3db81..8c15722 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -689,7 +689,6 @@ static int at24_remove(struct i2c_client *client) static struct i2c_driver at24_driver = { .driver = { .name = "at24", - .owner = THIS_MODULE, }, .probe = at24_probe, .remove = at24_remove, diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 12c30b4..976df00 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -465,7 +465,6 @@ MODULE_DEVICE_TABLE(i2c, isl29003_id); static struct i2c_driver isl29003_driver = { .driver = { .name = ISL29003_DRV_NAME, - .owner = THIS_MODULE, .pm = ISL29003_PM_OPS, }, .probe = isl29003_probe, diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c index e3e7f1d..0c3bb7e 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c @@ -274,7 +274,6 @@ static const struct dev_pm_ops lis3_pm_ops = { static struct i2c_driver lis3lv02d_i2c_driver = { .driver = { .name = DRV_NAME, - .owner = THIS_MODULE, .pm = &lis3_pm_ops, .of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids), }, diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 5027b8f..c84093e 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -939,7 +939,6 @@ static struct platform_driver kim_platform_driver = { .resume = kim_resume, .driver = { .name = "kim", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(kim_of_match), }, }; diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c index b003356..87a1337 100644 --- a/drivers/misc/tsl2550.c +++ b/drivers/misc/tsl2550.c @@ -446,7 +446,6 @@ MODULE_DEVICE_TABLE(i2c, tsl2550_id); static struct i2c_driver tsl2550_driver = { .driver = { .name = TSL2550_DRV_NAME, - .owner = THIS_MODULE, .pm = TSL2550_PM_OPS, }, .probe = tsl2550_probe, -- cgit v1.1 From ee2b7f60a5c5e391fdde907ac61f135d87e74622 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Thu, 16 Jul 2015 16:55:31 -0700 Subject: ARM: dts: qcom: Add binding for the qcom coincell charger This binding is used to configure the driver for the coincell charger found in Qualcomm PMICs. Signed-off-by: Tim Bird Reviewed-by: Andy Gross Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- .../bindings/power/qcom,coincell-charger.txt | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/qcom,coincell-charger.txt diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 0000000..0e6d875 --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,48 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charger-disable: + Usage: optional + Value type: + Definition: definining this property disables charging + +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and +../mfd/qcom-pm8xxx.txt + +Example: + + pm8941@0 { + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; -- cgit v1.1 From 1f26d1c1053ac179b0ee1edea7809cef07fe728e Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Thu, 16 Jul 2015 16:55:32 -0700 Subject: ARM: qcom: Add coincell charger driver This driver is used to configure the coincell charger found in Qualcomm PMICs. The driver allows configuring the current-limiting resistor for the charger, as well as the voltage to apply to the coincell (or capacitor) when charging. Signed-off-by: Tim Bird Reviewed-by: Andy Gross Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 10 +++ drivers/misc/Makefile | 1 + drivers/misc/qcom-coincell.c | 152 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 163 insertions(+) create mode 100644 drivers/misc/qcom-coincell.c diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 42c3852..ccccc29 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -271,6 +271,16 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config QCOM_COINCELL + tristate "Qualcomm coincell charger support" + depends on MFD_SPMI_PMIC || COMPILE_TEST + help + This driver supports the coincell block found inside of + Qualcomm PMICs. The coincell charger provides a means to + charge a coincell battery or backup capacitor which is used + to maintain PMIC register and RTC state in the absence of + external power. + config SGI_GRU tristate "SGI GRU driver" depends on X86_UV && SMP diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d056fb7..537d7f3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o diff --git a/drivers/misc/qcom-coincell.c b/drivers/misc/qcom-coincell.c new file mode 100644 index 0000000..7b4a2da --- /dev/null +++ b/drivers/misc/qcom-coincell.c @@ -0,0 +1,152 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2015, Sony Mobile Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qcom_coincell { + struct device *dev; + struct regmap *regmap; + u32 base_addr; +}; + +#define QCOM_COINCELL_REG_RSET 0x44 +#define QCOM_COINCELL_REG_VSET 0x45 +#define QCOM_COINCELL_REG_ENABLE 0x46 + +#define QCOM_COINCELL_ENABLE BIT(7) + +static const int qcom_rset_map[] = { 2100, 1700, 1200, 800 }; +static const int qcom_vset_map[] = { 2500, 3200, 3100, 3000 }; +/* NOTE: for pm8921 and others, voltage of 2500 is 16 (10000b), not 0 */ + +/* if enable==0, rset and vset are ignored */ +static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset, + int vset, bool enable) +{ + int i, j, rc; + + /* if disabling, just do that and skip other operations */ + if (!enable) + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, 0); + + /* find index for current-limiting resistor */ + for (i = 0; i < ARRAY_SIZE(qcom_rset_map); i++) + if (rset == qcom_rset_map[i]) + break; + + if (i >= ARRAY_SIZE(qcom_rset_map)) { + dev_err(chgr->dev, "invalid rset-ohms value %d\n", rset); + return -EINVAL; + } + + /* find index for charge voltage */ + for (j = 0; j < ARRAY_SIZE(qcom_vset_map); j++) + if (vset == qcom_vset_map[j]) + break; + + if (j >= ARRAY_SIZE(qcom_vset_map)) { + dev_err(chgr->dev, "invalid vset-millivolts value %d\n", vset); + return -EINVAL; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_RSET, i); + if (rc) { + /* + * This is mainly to flag a bad base_addr (reg) from dts. + * Other failures writing to the registers should be + * extremely rare, or indicative of problems that + * should be reported elsewhere (eg. spmi failure). + */ + dev_err(chgr->dev, "could not write to RSET register\n"); + return rc; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_VSET, j); + if (rc) + return rc; + + /* set 'enable' register */ + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, + QCOM_COINCELL_ENABLE); +} + +static int qcom_coincell_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct qcom_coincell chgr; + u32 rset, vset; + bool enable; + int rc; + + chgr.dev = &pdev->dev; + + chgr.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chgr.regmap) { + dev_err(chgr.dev, "Unable to get regmap\n"); + return -EINVAL; + } + + rc = of_property_read_u32(node, "reg", &chgr.base_addr); + if (rc) + return rc; + + enable = !of_property_read_bool(node, "qcom,charger-disable"); + + if (enable) { + rc = of_property_read_u32(node, "qcom,rset-ohms", &rset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,rset-ohms' in DT block"); + return rc; + } + + rc = of_property_read_u32(node, "qcom,vset-millivolts", &vset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,vset-millivolts' in DT block"); + return rc; + } + } + + return qcom_coincell_chgr_config(&chgr, rset, vset, enable); +} + +static const struct of_device_id qcom_coincell_match_table[] = { + { .compatible = "qcom,pm8941-coincell", }, + {} +}; + +MODULE_DEVICE_TABLE(of, qcom_coincell_match_table); + +static struct platform_driver qcom_coincell_driver = { + .driver = { + .name = "qcom-spmi-coincell", + .of_match_table = qcom_coincell_match_table, + }, + .probe = qcom_coincell_probe, +}; + +module_platform_driver(qcom_coincell_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC coincell charger driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1 From ccf97fe3ddac231655f1f8cacede6182a167de8b Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Thu, 16 Jul 2015 16:55:33 -0700 Subject: ARM: dts: qcom: Add dts changes for qcom coincell charger Add framework for the coincell charger DT block in pm8941 file, and actual values for honami battery in the honami dts file. Signed-off-by: Tim Bird Reviewed-by: Andy Gross Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 10 ++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index bd35b06..9bc72a3 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -17,3 +17,13 @@ status = "ok"; }; }; + +&spmi_bus { + pm8941@0 { + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index aa774e6..968f104 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -125,6 +125,12 @@ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; + + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + status = "disabled"; + }; }; usid1: pm8941@1 { -- cgit v1.1 From a42fa92ce77a9181f9baf57655acbb241ac4d306 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Mon, 1 Jun 2015 16:00:19 +0200 Subject: checkkconfigsymbols.py: find relevant commits Add option -f/--find to find relevant commits when using the --diff option. --find is useful in case a user wants to check commits that potentially cause a Kconfig symbol to be missing. This is done via 'git log -G $SYMBOL' (i.e., to get a list of commits that change $SYMBOL). The relevant commits are printed below the "SYMBOL\tFILES" line, followed by an empty line to increase readability. Signed-off-by: Valentin Rothberg Acked-by: Stefan Hengelein Acked-by: Andreas Ruprecht Signed-off-by: Greg Kroah-Hartman --- scripts/checkkconfigsymbols.py | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py index c89fdca..292848e 100755 --- a/scripts/checkkconfigsymbols.py +++ b/scripts/checkkconfigsymbols.py @@ -58,6 +58,11 @@ def parse_options(): "input format bases on Git log's " "\'commmit1..commit2\'.") + parser.add_option('-f', '--find', dest='find', action='store_true', + default=False, + help="Find and show commits that may cause symbols to be " + "missing. Required to run with --diff.") + parser.add_option('-i', '--ignore', dest='ignore', action='store', default="", help="Ignore files matching this pattern. Note that " @@ -86,6 +91,9 @@ def parse_options(): "'--force' if you\nwant to ignore this warning and " "continue.") + if opts.commit: + opts.find = False + if opts.ignore: try: re.match(opts.ignore, "this/is/just/a/test.c") @@ -129,12 +137,18 @@ def main(): if not feature in undefined_a: files = sorted(undefined_b.get(feature)) print "%s\t%s" % (feature, ", ".join(files)) + if opts.find: + commits = find_commits(feature, opts.diff) + print commits # check if there are new files that reference the undefined feature else: files = sorted(undefined_b.get(feature) - undefined_a.get(feature)) if files: print "%s\t%s" % (feature, ", ".join(files)) + if opts.find: + commits = find_commits(feature, opts.diff) + print commits # reset to head execute("git reset --hard %s" % head) @@ -156,6 +170,13 @@ def execute(cmd): return stdout +def find_commits(symbol, diff): + """Find commits changing %symbol in the given range of %diff.""" + commits = execute("git log --pretty=oneline --abbrev-commit -G %s %s" + % (symbol, diff)) + return commits + + def tree_is_dirty(): """Return true if the current working tree is dirty (i.e., if any file has been added, deleted, modified, renamed or copied but not committed).""" -- cgit v1.1 From c745566306e363675d8aa43ee9f39232ade4d5e6 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Mon, 1 Jun 2015 16:00:20 +0200 Subject: checkkconfigsymbols.py: colored output Color output to make it more readable. Symbols will be printed yellow, relevant commits (see --find) red. Signed-off-by: Valentin Rothberg Acked-by: Stefan Hengelein Acked-by: Andreas Ruprecht Signed-off-by: Greg Kroah-Hartman --- scripts/checkkconfigsymbols.py | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py index 292848e..d89371c 100755 --- a/scripts/checkkconfigsymbols.py +++ b/scripts/checkkconfigsymbols.py @@ -2,7 +2,7 @@ """Find Kconfig symbols that are referenced but not defined.""" -# (c) 2014-2015 Valentin Rothberg +# (c) 2014-2015 Valentin Rothberg # (c) 2014 Stefan Hengelein # # Licensed under the terms of the GNU GPL License version 2 @@ -136,19 +136,19 @@ def main(): # feature has not been undefined before if not feature in undefined_a: files = sorted(undefined_b.get(feature)) - print "%s\t%s" % (feature, ", ".join(files)) + print "%s\t%s" % (yel(feature), ", ".join(files)) if opts.find: commits = find_commits(feature, opts.diff) - print commits + print red(commits) # check if there are new files that reference the undefined feature else: files = sorted(undefined_b.get(feature) - undefined_a.get(feature)) if files: - print "%s\t%s" % (feature, ", ".join(files)) + print "%s\t%s" % (yel(feature), ", ".join(files)) if opts.find: commits = find_commits(feature, opts.diff) - print commits + print red(commits) # reset to head execute("git reset --hard %s" % head) @@ -158,7 +158,21 @@ def main(): undefined = check_symbols(opts.ignore) for feature in sorted(undefined): files = sorted(undefined.get(feature)) - print "%s\t%s" % (feature, ", ".join(files)) + print "%s\t%s" % (yel(feature), ", ".join(files)) + + +def yel(string): + """ + Color %string yellow. + """ + return "\033[33m%s\033[0m" % string + + +def red(string): + """ + Color %string red. + """ + return "\033[31m%s\033[0m" % string def execute(cmd): -- cgit v1.1 From 0bd38ae355227792dde3487779a9dc24d6b99631 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Mon, 27 Jul 2015 12:33:05 +0200 Subject: scripts/checkkconfigsymbols.py: support default statements Until now, checkkonfigsymbols.py did not check default statements for references on missing Kconfig symbols (i.e., undefined Kconfig options). Hence, add support to parse and check the Kconfig default statement. Signed-off-by: Valentin Rothberg Signed-off-by: Greg Kroah-Hartman --- scripts/checkkconfigsymbols.py | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py index d89371c..2f4b7ff 100755 --- a/scripts/checkkconfigsymbols.py +++ b/scripts/checkkconfigsymbols.py @@ -20,18 +20,20 @@ OPERATORS = r"&|\(|\)|\||\!" FEATURE = r"(?:\w*[A-Z0-9]\w*){2,}" DEF = r"^\s*(?:menu){,1}config\s+(" + FEATURE + r")\s*" EXPR = r"(?:" + OPERATORS + r"|\s|" + FEATURE + r")+" -STMT = r"^\s*(?:if|select|depends\s+on)\s+" + EXPR +DEFAULT = r"default\s+.*?(?:if\s.+){,1}" +STMT = r"^\s*(?:if|select|depends\s+on|(?:" + DEFAULT + r"))\s+" + EXPR SOURCE_FEATURE = r"(?:\W|\b)+[D]{,1}CONFIG_(" + FEATURE + r")" # regex objects REGEX_FILE_KCONFIG = re.compile(r".*Kconfig[\.\w+\-]*$") -REGEX_FEATURE = re.compile(r"(" + FEATURE + r")") +REGEX_FEATURE = re.compile(r'(?!\B"[^"]*)' + FEATURE + r'(?![^"]*"\B)') REGEX_SOURCE_FEATURE = re.compile(SOURCE_FEATURE) REGEX_KCONFIG_DEF = re.compile(DEF) REGEX_KCONFIG_EXPR = re.compile(EXPR) REGEX_KCONFIG_STMT = re.compile(STMT) REGEX_KCONFIG_HELP = re.compile(r"^\s+(help|---help---)\s*$") REGEX_FILTER_FEATURES = re.compile(r"[A-Za-z0-9]$") +REGEX_NUMERIC = re.compile(r"0[xX][0-9a-fA-F]+|[0-9]+") def parse_options(): @@ -314,6 +316,9 @@ def parse_kconfig_file(kfile, defined_features, referenced_features): line = line.strip('\n') features.extend(get_features_in_line(line)) for feature in set(features): + if REGEX_NUMERIC.match(feature): + # ignore numeric values + continue paths = referenced_features.get(feature, set()) paths.add(kfile) referenced_features[feature] = paths -- cgit v1.1 From 23253c31c6a7a3c5a437ec31830e2100484c0748 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Thu, 23 Jul 2015 10:43:11 +0300 Subject: mei: do not access freed cb in blocking write The mei_cl_write function is giving up on a write cb ownership after it was sent or queued. The write cb is then freed in the completion handler. Especially during blocking write mei_cl_write function waits for the completion handler and then access the freed memory to fetch the written size. The quick fix is to store the buffer size prior to sending, the size is not altered during the flow. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 6decbe1..1987a20 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -1356,6 +1356,7 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking) struct mei_device *dev; struct mei_msg_data *buf; struct mei_msg_hdr mei_hdr; + int size; int rets; @@ -1367,10 +1368,10 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking) dev = cl->dev; - buf = &cb->buf; + size = buf->size; - cl_dbg(dev, cl, "size=%d\n", buf->size); + cl_dbg(dev, cl, "size=%d\n", size); rets = pm_runtime_get(dev->dev); if (rets < 0 && rets != -EINPROGRESS) { @@ -1394,21 +1395,21 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking) if (rets == 0) { cl_dbg(dev, cl, "No flow control credentials: not sending.\n"); - rets = buf->size; + rets = size; goto out; } if (!mei_hbuf_acquire(dev)) { cl_dbg(dev, cl, "Cannot acquire the host buffer: not sending.\n"); - rets = buf->size; + rets = size; goto out; } /* Check for a maximum length */ - if (buf->size > mei_hbuf_max_len(dev)) { + if (size > mei_hbuf_max_len(dev)) { mei_hdr.length = mei_hbuf_max_len(dev); mei_hdr.msg_complete = 0; } else { - mei_hdr.length = buf->size; + mei_hdr.length = size; mei_hdr.msg_complete = 1; } @@ -1430,6 +1431,7 @@ out: else list_add_tail(&cb->list, &dev->write_list.list); + cb = NULL; if (blocking && cl->writing_state != MEI_WRITE_COMPLETE) { mutex_unlock(&dev->device_lock); @@ -1444,7 +1446,7 @@ out: } } - rets = buf->size; + rets = size; err: cl_dbg(dev, cl, "rpm: autosuspend\n"); pm_runtime_mark_last_busy(dev->dev); -- cgit v1.1 From b37719c31f8448ba36abc218a96663b4a6c66eb6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:33 +0300 Subject: mei: bus: fix drivers and devices names confusion In the mei bus layer there is use of different variables of driver and device types with no clear naming convention. There are generic struct device and struct driver, then mei_cl_{device, driver}, and finally mei_device which in this context serves as a bus device. The patch sets following naming convention: the variables of type struct device remains dev the variables of type struct driver remains drv the variables of type struct mei_cl_device are now cldev the variables of type struct mei_cl_driver are now cldrv the variables of type struct mei_device are now bus, in bus layer context Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 260 ++++++++++++++++++++++----------------------- drivers/misc/mei/mei_dev.h | 12 +-- drivers/misc/mei/nfc.c | 80 +++++++------- 3 files changed, 176 insertions(+), 176 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 458aa5a..18c37af 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -32,22 +32,22 @@ static int mei_cl_device_match(struct device *dev, struct device_driver *drv) { - struct mei_cl_device *device = to_mei_cl_device(dev); - struct mei_cl_driver *driver = to_mei_cl_driver(drv); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); const struct mei_cl_device_id *id; const uuid_le *uuid; const char *name; - if (!device) + if (!cldev) return 0; - uuid = mei_me_cl_uuid(device->me_cl); - name = device->name; + uuid = mei_me_cl_uuid(cldev->me_cl); + name = cldev->name; - if (!driver || !driver->id_table) + if (!cldrv || !cldrv->id_table) return 0; - id = driver->id_table; + id = cldrv->id_table; while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) { @@ -68,54 +68,54 @@ static int mei_cl_device_match(struct device *dev, struct device_driver *drv) static int mei_cl_device_probe(struct device *dev) { - struct mei_cl_device *device = to_mei_cl_device(dev); - struct mei_cl_driver *driver; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv; struct mei_cl_device_id id; - if (!device) + if (!cldev) return 0; - driver = to_mei_cl_driver(dev->driver); - if (!driver || !driver->probe) + cldrv = to_mei_cl_driver(dev->driver); + if (!cldrv || !cldrv->probe) return -ENODEV; dev_dbg(dev, "Device probe\n"); - strlcpy(id.name, device->name, sizeof(id.name)); + strlcpy(id.name, cldev->name, sizeof(id.name)); - return driver->probe(device, &id); + return cldrv->probe(cldev, &id); } static int mei_cl_device_remove(struct device *dev) { - struct mei_cl_device *device = to_mei_cl_device(dev); - struct mei_cl_driver *driver; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv; - if (!device || !dev->driver) + if (!cldev || !dev->driver) return 0; - if (device->event_cb) { - device->event_cb = NULL; - cancel_work_sync(&device->event_work); + if (cldev->event_cb) { + cldev->event_cb = NULL; + cancel_work_sync(&cldev->event_work); } - driver = to_mei_cl_driver(dev->driver); - if (!driver->remove) { + cldrv = to_mei_cl_driver(dev->driver); + if (!cldrv->remove) { dev->driver = NULL; return 0; } - return driver->remove(device); + return cldrv->remove(cldev); } static ssize_t name_show(struct device *dev, struct device_attribute *a, char *buf) { - struct mei_cl_device *device = to_mei_cl_device(dev); + struct mei_cl_device *cldev = to_mei_cl_device(dev); size_t len; - len = snprintf(buf, PAGE_SIZE, "%s", device->name); + len = snprintf(buf, PAGE_SIZE, "%s", cldev->name); return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; } @@ -124,8 +124,8 @@ static DEVICE_ATTR_RO(name); static ssize_t uuid_show(struct device *dev, struct device_attribute *a, char *buf) { - struct mei_cl_device *device = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(device->me_cl); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); size_t len; len = snprintf(buf, PAGE_SIZE, "%pUl", uuid); @@ -137,12 +137,12 @@ static DEVICE_ATTR_RO(uuid); static ssize_t modalias_show(struct device *dev, struct device_attribute *a, char *buf) { - struct mei_cl_device *device = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(device->me_cl); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); size_t len; len = snprintf(buf, PAGE_SIZE, "mei:%s:" MEI_CL_UUID_FMT ":", - device->name, MEI_CL_UUID_ARGS(uuid->b)); + cldev->name, MEI_CL_UUID_ARGS(uuid->b)); return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; } @@ -158,17 +158,17 @@ ATTRIBUTE_GROUPS(mei_cl_dev); static int mei_cl_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct mei_cl_device *device = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(device->me_cl); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); if (add_uevent_var(env, "MEI_CL_UUID=%pUl", uuid)) return -ENOMEM; - if (add_uevent_var(env, "MEI_CL_NAME=%s", device->name)) + if (add_uevent_var(env, "MEI_CL_NAME=%s", cldev->name)) return -ENOMEM; if (add_uevent_var(env, "MODALIAS=mei:%s:" MEI_CL_UUID_FMT ":", - device->name, MEI_CL_UUID_ARGS(uuid->b))) + cldev->name, MEI_CL_UUID_ARGS(uuid->b))) return -ENOMEM; return 0; @@ -185,121 +185,121 @@ static struct bus_type mei_cl_bus_type = { static void mei_cl_dev_release(struct device *dev) { - struct mei_cl_device *device = to_mei_cl_device(dev); + struct mei_cl_device *cldev = to_mei_cl_device(dev); - if (!device) + if (!cldev) return; - mei_me_cl_put(device->me_cl); - kfree(device); + mei_me_cl_put(cldev->me_cl); + kfree(cldev); } static struct device_type mei_cl_device_type = { .release = mei_cl_dev_release, }; -struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *dev, +struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, uuid_le uuid) { struct mei_cl *cl; - list_for_each_entry(cl, &dev->device_list, device_link) { - if (cl->device && cl->device->me_cl && - !uuid_le_cmp(uuid, *mei_me_cl_uuid(cl->device->me_cl))) + list_for_each_entry(cl, &bus->device_list, device_link) { + if (cl->cldev && cl->cldev->me_cl && + !uuid_le_cmp(uuid, *mei_me_cl_uuid(cl->cldev->me_cl))) return cl; } return NULL; } -struct mei_cl_device *mei_cl_add_device(struct mei_device *dev, +struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_me_client *me_cl, struct mei_cl *cl, char *name) { - struct mei_cl_device *device; + struct mei_cl_device *cldev; int status; - device = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); - if (!device) + cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); + if (!cldev) return NULL; - device->me_cl = mei_me_cl_get(me_cl); - if (!device->me_cl) { - kfree(device); + cldev->me_cl = mei_me_cl_get(me_cl); + if (!cldev->me_cl) { + kfree(cldev); return NULL; } - device->cl = cl; - device->dev.parent = dev->dev; - device->dev.bus = &mei_cl_bus_type; - device->dev.type = &mei_cl_device_type; + cldev->cl = cl; + cldev->dev.parent = bus->dev; + cldev->dev.bus = &mei_cl_bus_type; + cldev->dev.type = &mei_cl_device_type; - strlcpy(device->name, name, sizeof(device->name)); + strlcpy(cldev->name, name, sizeof(cldev->name)); - dev_set_name(&device->dev, "mei:%s:%pUl", name, mei_me_cl_uuid(me_cl)); + dev_set_name(&cldev->dev, "mei:%s:%pUl", name, mei_me_cl_uuid(me_cl)); - status = device_register(&device->dev); + status = device_register(&cldev->dev); if (status) { - dev_err(dev->dev, "Failed to register MEI device\n"); - mei_me_cl_put(device->me_cl); - kfree(device); + dev_err(bus->dev, "Failed to register MEI device\n"); + mei_me_cl_put(cldev->me_cl); + kfree(cldev); return NULL; } - cl->device = device; + cl->cldev = cldev; - dev_dbg(&device->dev, "client %s registered\n", name); + dev_dbg(&cldev->dev, "client %s registered\n", name); - return device; + return cldev; } EXPORT_SYMBOL_GPL(mei_cl_add_device); -void mei_cl_remove_device(struct mei_cl_device *device) +void mei_cl_remove_device(struct mei_cl_device *cldev) { - device_unregister(&device->dev); + device_unregister(&cldev->dev); } EXPORT_SYMBOL_GPL(mei_cl_remove_device); -int __mei_cl_driver_register(struct mei_cl_driver *driver, struct module *owner) +int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner) { int err; - driver->driver.name = driver->name; - driver->driver.owner = owner; - driver->driver.bus = &mei_cl_bus_type; + cldrv->driver.name = cldrv->name; + cldrv->driver.owner = owner; + cldrv->driver.bus = &mei_cl_bus_type; - err = driver_register(&driver->driver); + err = driver_register(&cldrv->driver); if (err) return err; - pr_debug("mei: driver [%s] registered\n", driver->driver.name); + pr_debug("mei: driver [%s] registered\n", cldrv->driver.name); return 0; } EXPORT_SYMBOL_GPL(__mei_cl_driver_register); -void mei_cl_driver_unregister(struct mei_cl_driver *driver) +void mei_cl_driver_unregister(struct mei_cl_driver *cldrv) { - driver_unregister(&driver->driver); + driver_unregister(&cldrv->driver); - pr_debug("mei: driver [%s] unregistered\n", driver->driver.name); + pr_debug("mei: driver [%s] unregistered\n", cldrv->driver.name); } EXPORT_SYMBOL_GPL(mei_cl_driver_unregister); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking) { - struct mei_device *dev; + struct mei_device *bus; struct mei_cl_cb *cb = NULL; ssize_t rets; if (WARN_ON(!cl || !cl->dev)) return -ENODEV; - dev = cl->dev; + bus = cl->dev; - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); if (!mei_cl_is_connected(cl)) { rets = -ENODEV; goto out; @@ -327,7 +327,7 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, rets = mei_cl_write(cl, cb, blocking); out: - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); if (rets < 0) mei_io_cb_free(cb); @@ -336,7 +336,7 @@ out: ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) { - struct mei_device *dev; + struct mei_device *bus; struct mei_cl_cb *cb; size_t r_length; ssize_t rets; @@ -344,9 +344,9 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) if (WARN_ON(!cl || !cl->dev)) return -ENODEV; - dev = cl->dev; + bus = cl->dev; - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); cb = mei_cl_read_cb(cl, NULL); if (cb) @@ -358,7 +358,7 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) if (list_empty(&cl->rd_completed) && !waitqueue_active(&cl->rx_wait)) { - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); if (wait_event_interruptible(cl->rx_wait, (!list_empty(&cl->rd_completed)) || @@ -369,7 +369,7 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) return -ERESTARTSYS; } - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); if (!mei_cl_is_connected(cl)) { rets = -EBUSY; @@ -396,14 +396,14 @@ copy: free: mei_io_cb_free(cb); out: - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); return rets; } -ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length) +ssize_t mei_cl_send(struct mei_cl_device *cldev, u8 *buf, size_t length) { - struct mei_cl *cl = device->cl; + struct mei_cl *cl = cldev->cl; if (cl == NULL) return -ENODEV; @@ -412,9 +412,9 @@ ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length) } EXPORT_SYMBOL_GPL(mei_cl_send); -ssize_t mei_cl_recv(struct mei_cl_device *device, u8 *buf, size_t length) +ssize_t mei_cl_recv(struct mei_cl_device *cldev, u8 *buf, size_t length) { - struct mei_cl *cl = device->cl; + struct mei_cl *cl = cldev->cl; if (cl == NULL) return -ENODEV; @@ -425,108 +425,108 @@ EXPORT_SYMBOL_GPL(mei_cl_recv); static void mei_bus_event_work(struct work_struct *work) { - struct mei_cl_device *device; + struct mei_cl_device *cldev; - device = container_of(work, struct mei_cl_device, event_work); + cldev = container_of(work, struct mei_cl_device, event_work); - if (device->event_cb) - device->event_cb(device, device->events, device->event_context); + if (cldev->event_cb) + cldev->event_cb(cldev, cldev->events, cldev->event_context); - device->events = 0; + cldev->events = 0; /* Prepare for the next read */ - mei_cl_read_start(device->cl, 0, NULL); + mei_cl_read_start(cldev->cl, 0, NULL); } -int mei_cl_register_event_cb(struct mei_cl_device *device, +int mei_cl_register_event_cb(struct mei_cl_device *cldev, mei_cl_event_cb_t event_cb, void *context) { - if (device->event_cb) + if (cldev->event_cb) return -EALREADY; - device->events = 0; - device->event_cb = event_cb; - device->event_context = context; - INIT_WORK(&device->event_work, mei_bus_event_work); + cldev->events = 0; + cldev->event_cb = event_cb; + cldev->event_context = context; + INIT_WORK(&cldev->event_work, mei_bus_event_work); - mei_cl_read_start(device->cl, 0, NULL); + mei_cl_read_start(cldev->cl, 0, NULL); return 0; } EXPORT_SYMBOL_GPL(mei_cl_register_event_cb); -void *mei_cl_get_drvdata(const struct mei_cl_device *device) +void *mei_cl_get_drvdata(const struct mei_cl_device *cldev) { - return dev_get_drvdata(&device->dev); + return dev_get_drvdata(&cldev->dev); } EXPORT_SYMBOL_GPL(mei_cl_get_drvdata); -void mei_cl_set_drvdata(struct mei_cl_device *device, void *data) +void mei_cl_set_drvdata(struct mei_cl_device *cldev, void *data) { - dev_set_drvdata(&device->dev, data); + dev_set_drvdata(&cldev->dev, data); } EXPORT_SYMBOL_GPL(mei_cl_set_drvdata); -int mei_cl_enable_device(struct mei_cl_device *device) +int mei_cl_enable_device(struct mei_cl_device *cldev) { int err; - struct mei_device *dev; - struct mei_cl *cl = device->cl; + struct mei_device *bus; + struct mei_cl *cl = cldev->cl; if (cl == NULL) return -ENODEV; - dev = cl->dev; + bus = cl->dev; - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); if (mei_cl_is_connected(cl)) { - mutex_unlock(&dev->device_lock); - dev_warn(dev->dev, "Already connected"); + mutex_unlock(&bus->device_lock); + dev_warn(bus->dev, "Already connected"); return -EBUSY; } - err = mei_cl_connect(cl, device->me_cl, NULL); + err = mei_cl_connect(cl, cldev->me_cl, NULL); if (err < 0) { - mutex_unlock(&dev->device_lock); - dev_err(dev->dev, "Could not connect to the ME client"); + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not connect to the ME client"); return err; } - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); - if (device->event_cb) - mei_cl_read_start(device->cl, 0, NULL); + if (cldev->event_cb) + mei_cl_read_start(cldev->cl, 0, NULL); return 0; } EXPORT_SYMBOL_GPL(mei_cl_enable_device); -int mei_cl_disable_device(struct mei_cl_device *device) +int mei_cl_disable_device(struct mei_cl_device *cldev) { int err; - struct mei_device *dev; - struct mei_cl *cl = device->cl; + struct mei_device *bus; + struct mei_cl *cl = cldev->cl; if (cl == NULL) return -ENODEV; - dev = cl->dev; + bus = cl->dev; - device->event_cb = NULL; + cldev->event_cb = NULL; - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); if (!mei_cl_is_connected(cl)) { - dev_err(dev->dev, "Already disconnected"); + dev_err(bus->dev, "Already disconnected"); err = 0; goto out; } err = mei_cl_disconnect(cl); if (err < 0) { - dev_err(dev->dev, "Could not disconnect from the ME client"); + dev_err(bus->dev, "Could not disconnect from the ME client"); goto out; } @@ -534,7 +534,7 @@ int mei_cl_disable_device(struct mei_cl_device *device) mei_cl_flush_queues(cl, NULL); out: - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); return err; } @@ -542,14 +542,14 @@ EXPORT_SYMBOL_GPL(mei_cl_disable_device); void mei_cl_bus_rx_event(struct mei_cl *cl) { - struct mei_cl_device *device = cl->device; + struct mei_cl_device *cldev = cl->cldev; - if (!device || !device->event_cb) + if (!cldev || !cldev->event_cb) return; - set_bit(MEI_CL_EVENT_RX, &device->events); + set_bit(MEI_CL_EVENT_RX, &cldev->events); - schedule_work(&device->event_work); + schedule_work(&cldev->event_work); } int __init mei_cl_bus_init(void) diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 453f6a3..bc65fb4 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -240,7 +240,7 @@ struct mei_cl_cb { * @rd_pending: pending read credits * @rd_completed: completed read * - * @device: device on the mei client bus + * @cldev: device on the mei client bus * @device_link: link to bus clients */ struct mei_cl { @@ -261,7 +261,7 @@ struct mei_cl { struct list_head rd_completed; /* MEI CL bus data */ - struct mei_cl_device *device; + struct mei_cl_device *cldev; struct list_head device_link; }; @@ -330,20 +330,20 @@ struct mei_hw_ops { /* MEI bus API*/ -struct mei_cl_device *mei_cl_add_device(struct mei_device *dev, +struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_me_client *me_cl, struct mei_cl *cl, char *name); -void mei_cl_remove_device(struct mei_cl_device *device); +void mei_cl_remove_device(struct mei_cl_device *cldev); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking); ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length); void mei_cl_bus_rx_event(struct mei_cl *cl); -void mei_cl_bus_remove_devices(struct mei_device *dev); +void mei_cl_bus_remove_devices(struct mei_device *bus); int mei_cl_bus_init(void); void mei_cl_bus_exit(void); -struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *dev, uuid_le uuid); +struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, uuid_le uuid); /** * enum mei_pg_event - power gating transition events diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c index 290ef30..47aa152 100644 --- a/drivers/misc/mei/nfc.c +++ b/drivers/misc/mei/nfc.c @@ -152,12 +152,12 @@ static void mei_nfc_free(struct mei_nfc_dev *ndev) static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) { - struct mei_device *dev; + struct mei_device *bus; if (!ndev->cl) return -ENODEV; - dev = ndev->cl->dev; + bus = ndev->cl->dev; switch (ndev->vendor_id) { case MEI_NFC_VENDOR_INSIDE: @@ -167,7 +167,7 @@ static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) return 0; default: - dev_err(dev->dev, "Unknown radio type 0x%x\n", + dev_err(bus->dev, "Unknown radio type 0x%x\n", ndev->radio_type); return -EINVAL; @@ -179,14 +179,14 @@ static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) ndev->bus_name = "pn544"; return 0; default: - dev_err(dev->dev, "Unknown radio type 0x%x\n", + dev_err(bus->dev, "Unknown radio type 0x%x\n", ndev->radio_type); return -EINVAL; } default: - dev_err(dev->dev, "Unknown vendor ID 0x%x\n", + dev_err(bus->dev, "Unknown vendor ID 0x%x\n", ndev->vendor_id); return -EINVAL; @@ -197,7 +197,7 @@ static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) static int mei_nfc_if_version(struct mei_nfc_dev *ndev) { - struct mei_device *dev; + struct mei_device *bus; struct mei_cl *cl; struct mei_nfc_cmd cmd; @@ -207,7 +207,7 @@ static int mei_nfc_if_version(struct mei_nfc_dev *ndev) int bytes_recv, ret; cl = ndev->cl_info; - dev = cl->dev; + bus = cl->dev; memset(&cmd, 0, sizeof(struct mei_nfc_cmd)); cmd.command = MEI_NFC_CMD_MAINTENANCE; @@ -216,7 +216,7 @@ static int mei_nfc_if_version(struct mei_nfc_dev *ndev) ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1); if (ret < 0) { - dev_err(dev->dev, "Could not send IF version cmd\n"); + dev_err(bus->dev, "Could not send IF version cmd\n"); return ret; } @@ -230,7 +230,7 @@ static int mei_nfc_if_version(struct mei_nfc_dev *ndev) bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { - dev_err(dev->dev, "Could not read IF version\n"); + dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err; } @@ -248,7 +248,7 @@ err: static void mei_nfc_init(struct work_struct *work) { - struct mei_device *dev; + struct mei_device *bus; struct mei_cl_device *cldev; struct mei_nfc_dev *ndev; struct mei_cl *cl_info; @@ -257,57 +257,57 @@ static void mei_nfc_init(struct work_struct *work) ndev = container_of(work, struct mei_nfc_dev, init_work); cl_info = ndev->cl_info; - dev = cl_info->dev; + bus = cl_info->dev; - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); /* check for valid client id */ - me_cl_info = mei_me_cl_by_uuid(dev, &mei_nfc_info_guid); + me_cl_info = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); if (!me_cl_info) { - mutex_unlock(&dev->device_lock); - dev_info(dev->dev, "nfc: failed to find the info client\n"); + mutex_unlock(&bus->device_lock); + dev_info(bus->dev, "nfc: failed to find the info client\n"); goto err; } if (mei_cl_connect(cl_info, me_cl_info, NULL) < 0) { mei_me_cl_put(me_cl_info); - mutex_unlock(&dev->device_lock); - dev_err(dev->dev, "Could not connect to the NFC INFO ME client"); + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not connect to the NFC INFO ME client"); goto err; } mei_me_cl_put(me_cl_info); - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); if (mei_nfc_if_version(ndev) < 0) { - dev_err(dev->dev, "Could not get the NFC interface version"); + dev_err(bus->dev, "Could not get the NFC interface version"); goto err; } - dev_info(dev->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", + dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", ndev->fw_ivn, ndev->vendor_id, ndev->radio_type); - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); if (mei_cl_disconnect(cl_info) < 0) { - mutex_unlock(&dev->device_lock); - dev_err(dev->dev, "Could not disconnect the NFC INFO ME client"); + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not disconnect the NFC INFO ME client"); goto err; } - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); if (mei_nfc_build_bus_name(ndev) < 0) { - dev_err(dev->dev, "Could not build the bus ID name\n"); + dev_err(bus->dev, "Could not build the bus ID name\n"); return; } - cldev = mei_cl_add_device(dev, ndev->me_cl, ndev->cl, + cldev = mei_cl_add_device(bus, ndev->me_cl, ndev->cl, ndev->bus_name); if (!cldev) { - dev_err(dev->dev, "Could not add the NFC device to the MEI bus\n"); + dev_err(bus->dev, "Could not add the NFC device to the MEI bus\n"); goto err; } @@ -318,14 +318,14 @@ static void mei_nfc_init(struct work_struct *work) return; err: - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); mei_nfc_free(ndev); - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); } -int mei_nfc_host_init(struct mei_device *dev, struct mei_me_client *me_cl) +int mei_nfc_host_init(struct mei_device *bus, struct mei_me_client *me_cl) { struct mei_nfc_dev *ndev; struct mei_cl *cl_info, *cl; @@ -335,7 +335,7 @@ int mei_nfc_host_init(struct mei_device *dev, struct mei_me_client *me_cl) /* in case of internal reset bail out * as the device is already setup */ - cl = mei_cl_bus_find_cl_by_uuid(dev, mei_nfc_guid); + cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); if (cl) return 0; @@ -351,23 +351,23 @@ int mei_nfc_host_init(struct mei_device *dev, struct mei_me_client *me_cl) goto err; } - cl_info = mei_cl_alloc_linked(dev, MEI_HOST_CLIENT_ID_ANY); + cl_info = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); if (IS_ERR(cl_info)) { ret = PTR_ERR(cl_info); goto err; } - list_add_tail(&cl_info->device_link, &dev->device_list); + list_add_tail(&cl_info->device_link, &bus->device_list); ndev->cl_info = cl_info; - cl = mei_cl_alloc_linked(dev, MEI_HOST_CLIENT_ID_ANY); + cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); if (IS_ERR(cl)) { ret = PTR_ERR(cl); goto err; } - list_add_tail(&cl->device_link, &dev->device_list); + list_add_tail(&cl->device_link, &bus->device_list); ndev->cl = cl; @@ -382,17 +382,17 @@ err: return ret; } -void mei_nfc_host_exit(struct mei_device *dev) +void mei_nfc_host_exit(struct mei_device *bus) { struct mei_nfc_dev *ndev; struct mei_cl *cl; struct mei_cl_device *cldev; - cl = mei_cl_bus_find_cl_by_uuid(dev, mei_nfc_guid); + cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); if (!cl) return; - cldev = cl->device; + cldev = cl->cldev; if (!cldev) return; @@ -407,9 +407,9 @@ void mei_nfc_host_exit(struct mei_device *dev) */ mei_cl_remove_device(cldev); - mutex_lock(&dev->device_lock); + mutex_lock(&bus->device_lock); mei_nfc_free(ndev); - mutex_unlock(&dev->device_lock); + mutex_unlock(&bus->device_lock); } -- cgit v1.1 From a0a785c4ab91656a5413b4cd5bb8ed59f39f7446 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:34 +0300 Subject: mei: bus: rename nfc.c to bus-fixup.c The bus-fixup.c will be a place for fixups and quirks for all types of me client devices. As for now it contians only the fixup for setting the nfc device name on the me client bus. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/Makefile | 2 +- drivers/misc/mei/bus-fixup.c | 415 +++++++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/nfc.c | 415 ------------------------------------------- 3 files changed, 416 insertions(+), 416 deletions(-) create mode 100644 drivers/misc/mei/bus-fixup.c delete mode 100644 drivers/misc/mei/nfc.c diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile index 518914a..01447ca 100644 --- a/drivers/misc/mei/Makefile +++ b/drivers/misc/mei/Makefile @@ -11,7 +11,7 @@ mei-objs += main.o mei-objs += amthif.o mei-objs += wd.o mei-objs += bus.o -mei-objs += nfc.o +mei-objs += bus-fixup.o mei-$(CONFIG_DEBUG_FS) += debugfs.o obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c new file mode 100644 index 0000000..47aa152 --- /dev/null +++ b/drivers/misc/mei/bus-fixup.c @@ -0,0 +1,415 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "mei_dev.h" +#include "client.h" + +struct mei_nfc_cmd { + u8 command; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; + u8 sub_command; + u8 data[]; +} __packed; + +struct mei_nfc_reply { + u8 command; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; + u8 sub_command; + u8 reply_status; + u8 data[]; +} __packed; + +struct mei_nfc_if_version { + u8 radio_version_sw[3]; + u8 reserved[3]; + u8 radio_version_hw[3]; + u8 i2c_addr; + u8 fw_ivn; + u8 vendor_id; + u8 radio_type; +} __packed; + +struct mei_nfc_connect { + u8 fw_ivn; + u8 vendor_id; +} __packed; + +struct mei_nfc_connect_resp { + u8 fw_ivn; + u8 vendor_id; + u16 me_major; + u16 me_minor; + u16 me_hotfix; + u16 me_build; +} __packed; + +struct mei_nfc_hci_hdr { + u8 cmd; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; +} __packed; + +#define MEI_NFC_CMD_MAINTENANCE 0x00 +#define MEI_NFC_CMD_HCI_SEND 0x01 +#define MEI_NFC_CMD_HCI_RECV 0x02 + +#define MEI_NFC_SUBCMD_CONNECT 0x00 +#define MEI_NFC_SUBCMD_IF_VERSION 0x01 + +#define MEI_NFC_HEADER_SIZE 10 + +/** + * struct mei_nfc_dev - NFC mei device + * + * @me_cl: NFC me client + * @cl: NFC host client + * @cl_info: NFC info host client + * @init_work: perform connection to the info client + * @fw_ivn: NFC Interface Version Number + * @vendor_id: NFC manufacturer ID + * @radio_type: NFC radio type + * @bus_name: bus name + * + */ +struct mei_nfc_dev { + struct mei_me_client *me_cl; + struct mei_cl *cl; + struct mei_cl *cl_info; + struct work_struct init_work; + u8 fw_ivn; + u8 vendor_id; + u8 radio_type; + char *bus_name; +}; + +/* UUIDs for NFC F/W clients */ +const uuid_le mei_nfc_guid = UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, + 0x94, 0xd4, 0x50, 0x26, + 0x67, 0x23, 0x77, 0x5c); + +static const uuid_le mei_nfc_info_guid = UUID_LE(0xd2de1625, 0x382d, 0x417d, + 0x48, 0xa4, 0xef, 0xab, + 0xba, 0x8a, 0x12, 0x06); + +/* Vendors */ +#define MEI_NFC_VENDOR_INSIDE 0x00 +#define MEI_NFC_VENDOR_NXP 0x01 + +/* Radio types */ +#define MEI_NFC_VENDOR_INSIDE_UREAD 0x00 +#define MEI_NFC_VENDOR_NXP_PN544 0x01 + +static void mei_nfc_free(struct mei_nfc_dev *ndev) +{ + if (!ndev) + return; + + if (ndev->cl) { + list_del(&ndev->cl->device_link); + mei_cl_unlink(ndev->cl); + kfree(ndev->cl); + } + + if (ndev->cl_info) { + list_del(&ndev->cl_info->device_link); + mei_cl_unlink(ndev->cl_info); + kfree(ndev->cl_info); + } + + mei_me_cl_put(ndev->me_cl); + kfree(ndev); +} + +static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) +{ + struct mei_device *bus; + + if (!ndev->cl) + return -ENODEV; + + bus = ndev->cl->dev; + + switch (ndev->vendor_id) { + case MEI_NFC_VENDOR_INSIDE: + switch (ndev->radio_type) { + case MEI_NFC_VENDOR_INSIDE_UREAD: + ndev->bus_name = "microread"; + return 0; + + default: + dev_err(bus->dev, "Unknown radio type 0x%x\n", + ndev->radio_type); + + return -EINVAL; + } + + case MEI_NFC_VENDOR_NXP: + switch (ndev->radio_type) { + case MEI_NFC_VENDOR_NXP_PN544: + ndev->bus_name = "pn544"; + return 0; + default: + dev_err(bus->dev, "Unknown radio type 0x%x\n", + ndev->radio_type); + + return -EINVAL; + } + + default: + dev_err(bus->dev, "Unknown vendor ID 0x%x\n", + ndev->vendor_id); + + return -EINVAL; + } + + return 0; +} + +static int mei_nfc_if_version(struct mei_nfc_dev *ndev) +{ + struct mei_device *bus; + struct mei_cl *cl; + + struct mei_nfc_cmd cmd; + struct mei_nfc_reply *reply = NULL; + struct mei_nfc_if_version *version; + size_t if_version_length; + int bytes_recv, ret; + + cl = ndev->cl_info; + bus = cl->dev; + + memset(&cmd, 0, sizeof(struct mei_nfc_cmd)); + cmd.command = MEI_NFC_CMD_MAINTENANCE; + cmd.data_size = 1; + cmd.sub_command = MEI_NFC_SUBCMD_IF_VERSION; + + ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1); + if (ret < 0) { + dev_err(bus->dev, "Could not send IF version cmd\n"); + return ret; + } + + /* to be sure on the stack we alloc memory */ + if_version_length = sizeof(struct mei_nfc_reply) + + sizeof(struct mei_nfc_if_version); + + reply = kzalloc(if_version_length, GFP_KERNEL); + if (!reply) + return -ENOMEM; + + bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); + if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + dev_err(bus->dev, "Could not read IF version\n"); + ret = -EIO; + goto err; + } + + version = (struct mei_nfc_if_version *)reply->data; + + ndev->fw_ivn = version->fw_ivn; + ndev->vendor_id = version->vendor_id; + ndev->radio_type = version->radio_type; + +err: + kfree(reply); + return ret; +} + +static void mei_nfc_init(struct work_struct *work) +{ + struct mei_device *bus; + struct mei_cl_device *cldev; + struct mei_nfc_dev *ndev; + struct mei_cl *cl_info; + struct mei_me_client *me_cl_info; + + ndev = container_of(work, struct mei_nfc_dev, init_work); + + cl_info = ndev->cl_info; + bus = cl_info->dev; + + mutex_lock(&bus->device_lock); + + /* check for valid client id */ + me_cl_info = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); + if (!me_cl_info) { + mutex_unlock(&bus->device_lock); + dev_info(bus->dev, "nfc: failed to find the info client\n"); + goto err; + } + + if (mei_cl_connect(cl_info, me_cl_info, NULL) < 0) { + mei_me_cl_put(me_cl_info); + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not connect to the NFC INFO ME client"); + + goto err; + } + mei_me_cl_put(me_cl_info); + mutex_unlock(&bus->device_lock); + + if (mei_nfc_if_version(ndev) < 0) { + dev_err(bus->dev, "Could not get the NFC interface version"); + + goto err; + } + + dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", + ndev->fw_ivn, ndev->vendor_id, ndev->radio_type); + + mutex_lock(&bus->device_lock); + + if (mei_cl_disconnect(cl_info) < 0) { + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not disconnect the NFC INFO ME client"); + + goto err; + } + + mutex_unlock(&bus->device_lock); + + if (mei_nfc_build_bus_name(ndev) < 0) { + dev_err(bus->dev, "Could not build the bus ID name\n"); + return; + } + + cldev = mei_cl_add_device(bus, ndev->me_cl, ndev->cl, + ndev->bus_name); + if (!cldev) { + dev_err(bus->dev, "Could not add the NFC device to the MEI bus\n"); + + goto err; + } + + cldev->priv_data = ndev; + + + return; + +err: + mutex_lock(&bus->device_lock); + mei_nfc_free(ndev); + mutex_unlock(&bus->device_lock); + +} + + +int mei_nfc_host_init(struct mei_device *bus, struct mei_me_client *me_cl) +{ + struct mei_nfc_dev *ndev; + struct mei_cl *cl_info, *cl; + int ret; + + + /* in case of internal reset bail out + * as the device is already setup + */ + cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); + if (cl) + return 0; + + ndev = kzalloc(sizeof(struct mei_nfc_dev), GFP_KERNEL); + if (!ndev) { + ret = -ENOMEM; + goto err; + } + + ndev->me_cl = mei_me_cl_get(me_cl); + if (!ndev->me_cl) { + ret = -ENODEV; + goto err; + } + + cl_info = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + if (IS_ERR(cl_info)) { + ret = PTR_ERR(cl_info); + goto err; + } + + list_add_tail(&cl_info->device_link, &bus->device_list); + + ndev->cl_info = cl_info; + + cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + if (IS_ERR(cl)) { + ret = PTR_ERR(cl); + goto err; + } + + list_add_tail(&cl->device_link, &bus->device_list); + + ndev->cl = cl; + + INIT_WORK(&ndev->init_work, mei_nfc_init); + schedule_work(&ndev->init_work); + + return 0; + +err: + mei_nfc_free(ndev); + + return ret; +} + +void mei_nfc_host_exit(struct mei_device *bus) +{ + struct mei_nfc_dev *ndev; + struct mei_cl *cl; + struct mei_cl_device *cldev; + + cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); + if (!cl) + return; + + cldev = cl->cldev; + if (!cldev) + return; + + ndev = (struct mei_nfc_dev *)cldev->priv_data; + if (ndev) + cancel_work_sync(&ndev->init_work); + + cldev->priv_data = NULL; + + /* Need to remove the device here + * since mei_nfc_free will unlink the clients + */ + mei_cl_remove_device(cldev); + + mutex_lock(&bus->device_lock); + mei_nfc_free(ndev); + mutex_unlock(&bus->device_lock); +} + + diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c deleted file mode 100644 index 47aa152..0000000 --- a/drivers/misc/mei/nfc.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2013, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "mei_dev.h" -#include "client.h" - -struct mei_nfc_cmd { - u8 command; - u8 status; - u16 req_id; - u32 reserved; - u16 data_size; - u8 sub_command; - u8 data[]; -} __packed; - -struct mei_nfc_reply { - u8 command; - u8 status; - u16 req_id; - u32 reserved; - u16 data_size; - u8 sub_command; - u8 reply_status; - u8 data[]; -} __packed; - -struct mei_nfc_if_version { - u8 radio_version_sw[3]; - u8 reserved[3]; - u8 radio_version_hw[3]; - u8 i2c_addr; - u8 fw_ivn; - u8 vendor_id; - u8 radio_type; -} __packed; - -struct mei_nfc_connect { - u8 fw_ivn; - u8 vendor_id; -} __packed; - -struct mei_nfc_connect_resp { - u8 fw_ivn; - u8 vendor_id; - u16 me_major; - u16 me_minor; - u16 me_hotfix; - u16 me_build; -} __packed; - -struct mei_nfc_hci_hdr { - u8 cmd; - u8 status; - u16 req_id; - u32 reserved; - u16 data_size; -} __packed; - -#define MEI_NFC_CMD_MAINTENANCE 0x00 -#define MEI_NFC_CMD_HCI_SEND 0x01 -#define MEI_NFC_CMD_HCI_RECV 0x02 - -#define MEI_NFC_SUBCMD_CONNECT 0x00 -#define MEI_NFC_SUBCMD_IF_VERSION 0x01 - -#define MEI_NFC_HEADER_SIZE 10 - -/** - * struct mei_nfc_dev - NFC mei device - * - * @me_cl: NFC me client - * @cl: NFC host client - * @cl_info: NFC info host client - * @init_work: perform connection to the info client - * @fw_ivn: NFC Interface Version Number - * @vendor_id: NFC manufacturer ID - * @radio_type: NFC radio type - * @bus_name: bus name - * - */ -struct mei_nfc_dev { - struct mei_me_client *me_cl; - struct mei_cl *cl; - struct mei_cl *cl_info; - struct work_struct init_work; - u8 fw_ivn; - u8 vendor_id; - u8 radio_type; - char *bus_name; -}; - -/* UUIDs for NFC F/W clients */ -const uuid_le mei_nfc_guid = UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, - 0x94, 0xd4, 0x50, 0x26, - 0x67, 0x23, 0x77, 0x5c); - -static const uuid_le mei_nfc_info_guid = UUID_LE(0xd2de1625, 0x382d, 0x417d, - 0x48, 0xa4, 0xef, 0xab, - 0xba, 0x8a, 0x12, 0x06); - -/* Vendors */ -#define MEI_NFC_VENDOR_INSIDE 0x00 -#define MEI_NFC_VENDOR_NXP 0x01 - -/* Radio types */ -#define MEI_NFC_VENDOR_INSIDE_UREAD 0x00 -#define MEI_NFC_VENDOR_NXP_PN544 0x01 - -static void mei_nfc_free(struct mei_nfc_dev *ndev) -{ - if (!ndev) - return; - - if (ndev->cl) { - list_del(&ndev->cl->device_link); - mei_cl_unlink(ndev->cl); - kfree(ndev->cl); - } - - if (ndev->cl_info) { - list_del(&ndev->cl_info->device_link); - mei_cl_unlink(ndev->cl_info); - kfree(ndev->cl_info); - } - - mei_me_cl_put(ndev->me_cl); - kfree(ndev); -} - -static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) -{ - struct mei_device *bus; - - if (!ndev->cl) - return -ENODEV; - - bus = ndev->cl->dev; - - switch (ndev->vendor_id) { - case MEI_NFC_VENDOR_INSIDE: - switch (ndev->radio_type) { - case MEI_NFC_VENDOR_INSIDE_UREAD: - ndev->bus_name = "microread"; - return 0; - - default: - dev_err(bus->dev, "Unknown radio type 0x%x\n", - ndev->radio_type); - - return -EINVAL; - } - - case MEI_NFC_VENDOR_NXP: - switch (ndev->radio_type) { - case MEI_NFC_VENDOR_NXP_PN544: - ndev->bus_name = "pn544"; - return 0; - default: - dev_err(bus->dev, "Unknown radio type 0x%x\n", - ndev->radio_type); - - return -EINVAL; - } - - default: - dev_err(bus->dev, "Unknown vendor ID 0x%x\n", - ndev->vendor_id); - - return -EINVAL; - } - - return 0; -} - -static int mei_nfc_if_version(struct mei_nfc_dev *ndev) -{ - struct mei_device *bus; - struct mei_cl *cl; - - struct mei_nfc_cmd cmd; - struct mei_nfc_reply *reply = NULL; - struct mei_nfc_if_version *version; - size_t if_version_length; - int bytes_recv, ret; - - cl = ndev->cl_info; - bus = cl->dev; - - memset(&cmd, 0, sizeof(struct mei_nfc_cmd)); - cmd.command = MEI_NFC_CMD_MAINTENANCE; - cmd.data_size = 1; - cmd.sub_command = MEI_NFC_SUBCMD_IF_VERSION; - - ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1); - if (ret < 0) { - dev_err(bus->dev, "Could not send IF version cmd\n"); - return ret; - } - - /* to be sure on the stack we alloc memory */ - if_version_length = sizeof(struct mei_nfc_reply) + - sizeof(struct mei_nfc_if_version); - - reply = kzalloc(if_version_length, GFP_KERNEL); - if (!reply) - return -ENOMEM; - - bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { - dev_err(bus->dev, "Could not read IF version\n"); - ret = -EIO; - goto err; - } - - version = (struct mei_nfc_if_version *)reply->data; - - ndev->fw_ivn = version->fw_ivn; - ndev->vendor_id = version->vendor_id; - ndev->radio_type = version->radio_type; - -err: - kfree(reply); - return ret; -} - -static void mei_nfc_init(struct work_struct *work) -{ - struct mei_device *bus; - struct mei_cl_device *cldev; - struct mei_nfc_dev *ndev; - struct mei_cl *cl_info; - struct mei_me_client *me_cl_info; - - ndev = container_of(work, struct mei_nfc_dev, init_work); - - cl_info = ndev->cl_info; - bus = cl_info->dev; - - mutex_lock(&bus->device_lock); - - /* check for valid client id */ - me_cl_info = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); - if (!me_cl_info) { - mutex_unlock(&bus->device_lock); - dev_info(bus->dev, "nfc: failed to find the info client\n"); - goto err; - } - - if (mei_cl_connect(cl_info, me_cl_info, NULL) < 0) { - mei_me_cl_put(me_cl_info); - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not connect to the NFC INFO ME client"); - - goto err; - } - mei_me_cl_put(me_cl_info); - mutex_unlock(&bus->device_lock); - - if (mei_nfc_if_version(ndev) < 0) { - dev_err(bus->dev, "Could not get the NFC interface version"); - - goto err; - } - - dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", - ndev->fw_ivn, ndev->vendor_id, ndev->radio_type); - - mutex_lock(&bus->device_lock); - - if (mei_cl_disconnect(cl_info) < 0) { - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not disconnect the NFC INFO ME client"); - - goto err; - } - - mutex_unlock(&bus->device_lock); - - if (mei_nfc_build_bus_name(ndev) < 0) { - dev_err(bus->dev, "Could not build the bus ID name\n"); - return; - } - - cldev = mei_cl_add_device(bus, ndev->me_cl, ndev->cl, - ndev->bus_name); - if (!cldev) { - dev_err(bus->dev, "Could not add the NFC device to the MEI bus\n"); - - goto err; - } - - cldev->priv_data = ndev; - - - return; - -err: - mutex_lock(&bus->device_lock); - mei_nfc_free(ndev); - mutex_unlock(&bus->device_lock); - -} - - -int mei_nfc_host_init(struct mei_device *bus, struct mei_me_client *me_cl) -{ - struct mei_nfc_dev *ndev; - struct mei_cl *cl_info, *cl; - int ret; - - - /* in case of internal reset bail out - * as the device is already setup - */ - cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); - if (cl) - return 0; - - ndev = kzalloc(sizeof(struct mei_nfc_dev), GFP_KERNEL); - if (!ndev) { - ret = -ENOMEM; - goto err; - } - - ndev->me_cl = mei_me_cl_get(me_cl); - if (!ndev->me_cl) { - ret = -ENODEV; - goto err; - } - - cl_info = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); - if (IS_ERR(cl_info)) { - ret = PTR_ERR(cl_info); - goto err; - } - - list_add_tail(&cl_info->device_link, &bus->device_list); - - ndev->cl_info = cl_info; - - cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); - if (IS_ERR(cl)) { - ret = PTR_ERR(cl); - goto err; - } - - list_add_tail(&cl->device_link, &bus->device_list); - - ndev->cl = cl; - - INIT_WORK(&ndev->init_work, mei_nfc_init); - schedule_work(&ndev->init_work); - - return 0; - -err: - mei_nfc_free(ndev); - - return ret; -} - -void mei_nfc_host_exit(struct mei_device *bus) -{ - struct mei_nfc_dev *ndev; - struct mei_cl *cl; - struct mei_cl_device *cldev; - - cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); - if (!cl) - return; - - cldev = cl->cldev; - if (!cldev) - return; - - ndev = (struct mei_nfc_dev *)cldev->priv_data; - if (ndev) - cancel_work_sync(&ndev->init_work); - - cldev->priv_data = NULL; - - /* Need to remove the device here - * since mei_nfc_free will unlink the clients - */ - mei_cl_remove_device(cldev); - - mutex_lock(&bus->device_lock); - mei_nfc_free(ndev); - mutex_unlock(&bus->device_lock); -} - - -- cgit v1.1 From 6238299774377b12c3e24507b100b2687eb5ea32 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:35 +0300 Subject: mei: bus: move driver api functions at the start of the file To make the file more organize move mei client driver api to the start of the file and add Kdoc. There are no functional changes in this patch. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 799 +++++++++++++++++++++++++++---------------------- 1 file changed, 444 insertions(+), 355 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 18c37af..6ea8a40 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -30,527 +30,616 @@ #define to_mei_cl_driver(d) container_of(d, struct mei_cl_driver, driver) #define to_mei_cl_device(d) container_of(d, struct mei_cl_device, dev) -static int mei_cl_device_match(struct device *dev, struct device_driver *drv) +/** + * __mei_cl_send - internal client send (write) + * + * @cl: host client + * @buf: buffer to send + * @length: buffer length + * @blocking: wait for write completion + * + * Return: written size bytes or < 0 on error + */ +ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, + bool blocking) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); - const struct mei_cl_device_id *id; - const uuid_le *uuid; - const char *name; - - if (!cldev) - return 0; + struct mei_device *bus; + struct mei_cl_cb *cb = NULL; + ssize_t rets; - uuid = mei_me_cl_uuid(cldev->me_cl); - name = cldev->name; + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; - if (!cldrv || !cldrv->id_table) - return 0; + bus = cl->dev; - id = cldrv->id_table; + mutex_lock(&bus->device_lock); + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } - while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) { + /* Check if we have an ME client device */ + if (!mei_me_cl_is_active(cl->me_cl)) { + rets = -ENOTTY; + goto out; + } - if (!uuid_le_cmp(*uuid, id->uuid)) { - if (id->name[0]) { - if (!strncmp(name, id->name, sizeof(id->name))) - return 1; - } else { - return 1; - } - } + if (length > mei_cl_mtu(cl)) { + rets = -EFBIG; + goto out; + } - id++; + cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, NULL); + if (!cb) { + rets = -ENOMEM; + goto out; } - return 0; + memcpy(cb->buf.data, buf, length); + + rets = mei_cl_write(cl, cb, blocking); + +out: + mutex_unlock(&bus->device_lock); + if (rets < 0) + mei_io_cb_free(cb); + + return rets; } -static int mei_cl_device_probe(struct device *dev) +/** + * __mei_cl_recv - internal client receive (read) + * + * @cl: host client + * @buf: buffer to send + * @length: buffer length + * + * Return: read size in bytes of < 0 on error + */ +ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - struct mei_cl_driver *cldrv; - struct mei_cl_device_id id; - - if (!cldev) - return 0; + struct mei_device *bus; + struct mei_cl_cb *cb; + size_t r_length; + ssize_t rets; - cldrv = to_mei_cl_driver(dev->driver); - if (!cldrv || !cldrv->probe) + if (WARN_ON(!cl || !cl->dev)) return -ENODEV; - dev_dbg(dev, "Device probe\n"); + bus = cl->dev; - strlcpy(id.name, cldev->name, sizeof(id.name)); + mutex_lock(&bus->device_lock); - return cldrv->probe(cldev, &id); -} + cb = mei_cl_read_cb(cl, NULL); + if (cb) + goto copy; -static int mei_cl_device_remove(struct device *dev) -{ - struct mei_cl_device *cldev = to_mei_cl_device(dev); - struct mei_cl_driver *cldrv; + rets = mei_cl_read_start(cl, length, NULL); + if (rets && rets != -EBUSY) + goto out; - if (!cldev || !dev->driver) - return 0; + /* wait on event only if there is no other waiter */ + if (list_empty(&cl->rd_completed) && !waitqueue_active(&cl->rx_wait)) { - if (cldev->event_cb) { - cldev->event_cb = NULL; - cancel_work_sync(&cldev->event_work); - } + mutex_unlock(&bus->device_lock); - cldrv = to_mei_cl_driver(dev->driver); - if (!cldrv->remove) { - dev->driver = NULL; + if (wait_event_interruptible(cl->rx_wait, + (!list_empty(&cl->rd_completed)) || + (!mei_cl_is_connected(cl)))) { - return 0; + if (signal_pending(current)) + return -EINTR; + return -ERESTARTSYS; + } + + mutex_lock(&bus->device_lock); + + if (!mei_cl_is_connected(cl)) { + rets = -EBUSY; + goto out; + } } - return cldrv->remove(cldev); -} + cb = mei_cl_read_cb(cl, NULL); + if (!cb) { + rets = 0; + goto out; + } -static ssize_t name_show(struct device *dev, struct device_attribute *a, - char *buf) -{ - struct mei_cl_device *cldev = to_mei_cl_device(dev); - size_t len; +copy: + if (cb->status) { + rets = cb->status; + goto free; + } - len = snprintf(buf, PAGE_SIZE, "%s", cldev->name); + r_length = min_t(size_t, length, cb->buf_idx); + memcpy(buf, cb->buf.data, r_length); + rets = r_length; - return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; +free: + mei_io_cb_free(cb); +out: + mutex_unlock(&bus->device_lock); + + return rets; } -static DEVICE_ATTR_RO(name); -static ssize_t uuid_show(struct device *dev, struct device_attribute *a, - char *buf) +/** + * mei_cl_send - me device send (write) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * + * Return: written size in bytes or < 0 on error + */ +ssize_t mei_cl_send(struct mei_cl_device *cldev, u8 *buf, size_t length) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); - size_t len; + struct mei_cl *cl = cldev->cl; - len = snprintf(buf, PAGE_SIZE, "%pUl", uuid); + if (cl == NULL) + return -ENODEV; - return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; + return __mei_cl_send(cl, buf, length, 1); } -static DEVICE_ATTR_RO(uuid); +EXPORT_SYMBOL_GPL(mei_cl_send); -static ssize_t modalias_show(struct device *dev, struct device_attribute *a, - char *buf) +/** + * mei_cl_recv - client receive (read) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * + * Return: read size in bytes of < 0 on error + */ +ssize_t mei_cl_recv(struct mei_cl_device *cldev, u8 *buf, size_t length) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); - size_t len; + struct mei_cl *cl = cldev->cl; - len = snprintf(buf, PAGE_SIZE, "mei:%s:" MEI_CL_UUID_FMT ":", - cldev->name, MEI_CL_UUID_ARGS(uuid->b)); + if (cl == NULL) + return -ENODEV; - return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; + return __mei_cl_recv(cl, buf, length); } -static DEVICE_ATTR_RO(modalias); - -static struct attribute *mei_cl_dev_attrs[] = { - &dev_attr_name.attr, - &dev_attr_uuid.attr, - &dev_attr_modalias.attr, - NULL, -}; -ATTRIBUTE_GROUPS(mei_cl_dev); +EXPORT_SYMBOL_GPL(mei_cl_recv); -static int mei_cl_uevent(struct device *dev, struct kobj_uevent_env *env) +/** + * mei_bus_event_work - dispatch rx event for a bus device + * and schedule new work + * + * @work: work + */ +static void mei_bus_event_work(struct work_struct *work) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + struct mei_cl_device *cldev; - if (add_uevent_var(env, "MEI_CL_UUID=%pUl", uuid)) - return -ENOMEM; + cldev = container_of(work, struct mei_cl_device, event_work); - if (add_uevent_var(env, "MEI_CL_NAME=%s", cldev->name)) - return -ENOMEM; + if (cldev->event_cb) + cldev->event_cb(cldev, cldev->events, cldev->event_context); - if (add_uevent_var(env, "MODALIAS=mei:%s:" MEI_CL_UUID_FMT ":", - cldev->name, MEI_CL_UUID_ARGS(uuid->b))) - return -ENOMEM; + cldev->events = 0; - return 0; + /* Prepare for the next read */ + mei_cl_read_start(cldev->cl, 0, NULL); } -static struct bus_type mei_cl_bus_type = { - .name = "mei", - .dev_groups = mei_cl_dev_groups, - .match = mei_cl_device_match, - .probe = mei_cl_device_probe, - .remove = mei_cl_device_remove, - .uevent = mei_cl_uevent, -}; - -static void mei_cl_dev_release(struct device *dev) +/** + * mei_cl_bus_rx_event - schedule rx evenet + * + * @cl: host client + */ +void mei_cl_bus_rx_event(struct mei_cl *cl) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_device *cldev = cl->cldev; - if (!cldev) + if (!cldev || !cldev->event_cb) return; - mei_me_cl_put(cldev->me_cl); - kfree(cldev); -} - -static struct device_type mei_cl_device_type = { - .release = mei_cl_dev_release, -}; - -struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, - uuid_le uuid) -{ - struct mei_cl *cl; - - list_for_each_entry(cl, &bus->device_list, device_link) { - if (cl->cldev && cl->cldev->me_cl && - !uuid_le_cmp(uuid, *mei_me_cl_uuid(cl->cldev->me_cl))) - return cl; - } + set_bit(MEI_CL_EVENT_RX, &cldev->events); - return NULL; + schedule_work(&cldev->event_work); } -struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, - struct mei_me_client *me_cl, - struct mei_cl *cl, - char *name) +/** + * mei_cl_register_event_cb - register event callback + * + * @cldev: me client devices + * @event_cb: callback function + * @context: driver context data + * + * Return: 0 on success + * -EALREADY if an callback is already registered + * <0 on other errors + */ +int mei_cl_register_event_cb(struct mei_cl_device *cldev, + mei_cl_event_cb_t event_cb, void *context) { - struct mei_cl_device *cldev; - int status; - - cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); - if (!cldev) - return NULL; - - cldev->me_cl = mei_me_cl_get(me_cl); - if (!cldev->me_cl) { - kfree(cldev); - return NULL; - } - - cldev->cl = cl; - cldev->dev.parent = bus->dev; - cldev->dev.bus = &mei_cl_bus_type; - cldev->dev.type = &mei_cl_device_type; - - strlcpy(cldev->name, name, sizeof(cldev->name)); - - dev_set_name(&cldev->dev, "mei:%s:%pUl", name, mei_me_cl_uuid(me_cl)); + if (cldev->event_cb) + return -EALREADY; - status = device_register(&cldev->dev); - if (status) { - dev_err(bus->dev, "Failed to register MEI device\n"); - mei_me_cl_put(cldev->me_cl); - kfree(cldev); - return NULL; - } + cldev->events = 0; + cldev->event_cb = event_cb; + cldev->event_context = context; + INIT_WORK(&cldev->event_work, mei_bus_event_work); - cl->cldev = cldev; + mei_cl_read_start(cldev->cl, 0, NULL); - dev_dbg(&cldev->dev, "client %s registered\n", name); + return 0; +} +EXPORT_SYMBOL_GPL(mei_cl_register_event_cb); - return cldev; +/** + * mei_cl_get_drvdata - driver data getter + * + * @cldev: mei client device + * + * Return: driver private data + */ +void *mei_cl_get_drvdata(const struct mei_cl_device *cldev) +{ + return dev_get_drvdata(&cldev->dev); } -EXPORT_SYMBOL_GPL(mei_cl_add_device); +EXPORT_SYMBOL_GPL(mei_cl_get_drvdata); -void mei_cl_remove_device(struct mei_cl_device *cldev) +/** + * mei_cl_set_drvdata - driver data setter + * + * @cldev: mei client device + * @data: data to store + */ +void mei_cl_set_drvdata(struct mei_cl_device *cldev, void *data) { - device_unregister(&cldev->dev); + dev_set_drvdata(&cldev->dev, data); } -EXPORT_SYMBOL_GPL(mei_cl_remove_device); +EXPORT_SYMBOL_GPL(mei_cl_set_drvdata); -int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner) +/** + * mei_cl_enable_device - enable me client device + * create connection with me client + * + * @cldev: me client device + * + * Return: 0 on success and < 0 on error + */ +int mei_cl_enable_device(struct mei_cl_device *cldev) { int err; + struct mei_device *bus; + struct mei_cl *cl = cldev->cl; - cldrv->driver.name = cldrv->name; - cldrv->driver.owner = owner; - cldrv->driver.bus = &mei_cl_bus_type; + if (cl == NULL) + return -ENODEV; - err = driver_register(&cldrv->driver); - if (err) - return err; + bus = cl->dev; - pr_debug("mei: driver [%s] registered\n", cldrv->driver.name); + mutex_lock(&bus->device_lock); - return 0; -} -EXPORT_SYMBOL_GPL(__mei_cl_driver_register); + if (mei_cl_is_connected(cl)) { + mutex_unlock(&bus->device_lock); + dev_warn(bus->dev, "Already connected"); + return -EBUSY; + } -void mei_cl_driver_unregister(struct mei_cl_driver *cldrv) -{ - driver_unregister(&cldrv->driver); + err = mei_cl_connect(cl, cldev->me_cl, NULL); + if (err < 0) { + mutex_unlock(&bus->device_lock); + dev_err(bus->dev, "Could not connect to the ME client"); - pr_debug("mei: driver [%s] unregistered\n", cldrv->driver.name); + return err; + } + + mutex_unlock(&bus->device_lock); + + if (cldev->event_cb) + mei_cl_read_start(cldev->cl, 0, NULL); + + return 0; } -EXPORT_SYMBOL_GPL(mei_cl_driver_unregister); +EXPORT_SYMBOL_GPL(mei_cl_enable_device); -ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, - bool blocking) +/** + * mei_cl_disable_device - disable me client device + * disconnect form the me client + * + * @cldev: me client device + * + * Return: 0 on success and < 0 on error + */ +int mei_cl_disable_device(struct mei_cl_device *cldev) { + int err; struct mei_device *bus; - struct mei_cl_cb *cb = NULL; - ssize_t rets; + struct mei_cl *cl = cldev->cl; - if (WARN_ON(!cl || !cl->dev)) + if (cl == NULL) return -ENODEV; bus = cl->dev; - mutex_lock(&bus->device_lock); - if (!mei_cl_is_connected(cl)) { - rets = -ENODEV; - goto out; - } + cldev->event_cb = NULL; - /* Check if we have an ME client device */ - if (!mei_me_cl_is_active(cl->me_cl)) { - rets = -ENOTTY; - goto out; - } + mutex_lock(&bus->device_lock); - if (length > mei_cl_mtu(cl)) { - rets = -EFBIG; + if (!mei_cl_is_connected(cl)) { + dev_err(bus->dev, "Already disconnected"); + err = 0; goto out; } - cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, NULL); - if (!cb) { - rets = -ENOMEM; + err = mei_cl_disconnect(cl); + if (err < 0) { + dev_err(bus->dev, "Could not disconnect from the ME client"); goto out; } - memcpy(cb->buf.data, buf, length); - - rets = mei_cl_write(cl, cb, blocking); + /* Flush queues and remove any pending read */ + mei_cl_flush_queues(cl, NULL); out: mutex_unlock(&bus->device_lock); - if (rets < 0) - mei_io_cb_free(cb); + return err; - return rets; } +EXPORT_SYMBOL_GPL(mei_cl_disable_device); -ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) +static int mei_cl_device_match(struct device *dev, struct device_driver *drv) { - struct mei_device *bus; - struct mei_cl_cb *cb; - size_t r_length; - ssize_t rets; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); + const struct mei_cl_device_id *id; + const uuid_le *uuid; + const char *name; - if (WARN_ON(!cl || !cl->dev)) - return -ENODEV; + if (!cldev) + return 0; - bus = cl->dev; + uuid = mei_me_cl_uuid(cldev->me_cl); + name = cldev->name; - mutex_lock(&bus->device_lock); + if (!cldrv || !cldrv->id_table) + return 0; - cb = mei_cl_read_cb(cl, NULL); - if (cb) - goto copy; + id = cldrv->id_table; - rets = mei_cl_read_start(cl, length, NULL); - if (rets && rets != -EBUSY) - goto out; + while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) { - if (list_empty(&cl->rd_completed) && !waitqueue_active(&cl->rx_wait)) { + if (!uuid_le_cmp(*uuid, id->uuid)) { + if (id->name[0]) { + if (!strncmp(name, id->name, sizeof(id->name))) + return 1; + } else { + return 1; + } + } - mutex_unlock(&bus->device_lock); + id++; + } - if (wait_event_interruptible(cl->rx_wait, - (!list_empty(&cl->rd_completed)) || - (!mei_cl_is_connected(cl)))) { + return 0; +} - if (signal_pending(current)) - return -EINTR; - return -ERESTARTSYS; - } +static int mei_cl_device_probe(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv; + struct mei_cl_device_id id; - mutex_lock(&bus->device_lock); + if (!cldev) + return 0; - if (!mei_cl_is_connected(cl)) { - rets = -EBUSY; - goto out; - } - } + cldrv = to_mei_cl_driver(dev->driver); + if (!cldrv || !cldrv->probe) + return -ENODEV; + + dev_dbg(dev, "Device probe\n"); + + strlcpy(id.name, cldev->name, sizeof(id.name)); + + return cldrv->probe(cldev, &id); +} - cb = mei_cl_read_cb(cl, NULL); - if (!cb) { - rets = 0; - goto out; - } +static int mei_cl_device_remove(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv; -copy: - if (cb->status) { - rets = cb->status; - goto free; + if (!cldev || !dev->driver) + return 0; + + if (cldev->event_cb) { + cldev->event_cb = NULL; + cancel_work_sync(&cldev->event_work); } - r_length = min_t(size_t, length, cb->buf_idx); - memcpy(buf, cb->buf.data, r_length); - rets = r_length; + cldrv = to_mei_cl_driver(dev->driver); + if (!cldrv->remove) { + dev->driver = NULL; -free: - mei_io_cb_free(cb); -out: - mutex_unlock(&bus->device_lock); + return 0; + } - return rets; + return cldrv->remove(cldev); } -ssize_t mei_cl_send(struct mei_cl_device *cldev, u8 *buf, size_t length) +static ssize_t name_show(struct device *dev, struct device_attribute *a, + char *buf) { - struct mei_cl *cl = cldev->cl; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + size_t len; - if (cl == NULL) - return -ENODEV; + len = snprintf(buf, PAGE_SIZE, "%s", cldev->name); - return __mei_cl_send(cl, buf, length, 1); + return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; } -EXPORT_SYMBOL_GPL(mei_cl_send); +static DEVICE_ATTR_RO(name); -ssize_t mei_cl_recv(struct mei_cl_device *cldev, u8 *buf, size_t length) +static ssize_t uuid_show(struct device *dev, struct device_attribute *a, + char *buf) { - struct mei_cl *cl = cldev->cl; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + size_t len; - if (cl == NULL) - return -ENODEV; + len = snprintf(buf, PAGE_SIZE, "%pUl", uuid); - return __mei_cl_recv(cl, buf, length); + return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; } -EXPORT_SYMBOL_GPL(mei_cl_recv); +static DEVICE_ATTR_RO(uuid); -static void mei_bus_event_work(struct work_struct *work) +static ssize_t modalias_show(struct device *dev, struct device_attribute *a, + char *buf) { - struct mei_cl_device *cldev; - - cldev = container_of(work, struct mei_cl_device, event_work); - - if (cldev->event_cb) - cldev->event_cb(cldev, cldev->events, cldev->event_context); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + size_t len; - cldev->events = 0; + len = snprintf(buf, PAGE_SIZE, "mei:%s:" MEI_CL_UUID_FMT ":", + cldev->name, MEI_CL_UUID_ARGS(uuid->b)); - /* Prepare for the next read */ - mei_cl_read_start(cldev->cl, 0, NULL); + return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; } +static DEVICE_ATTR_RO(modalias); -int mei_cl_register_event_cb(struct mei_cl_device *cldev, - mei_cl_event_cb_t event_cb, void *context) +static struct attribute *mei_cl_dev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_uuid.attr, + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mei_cl_dev); + +static int mei_cl_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (cldev->event_cb) - return -EALREADY; + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); - cldev->events = 0; - cldev->event_cb = event_cb; - cldev->event_context = context; - INIT_WORK(&cldev->event_work, mei_bus_event_work); + if (add_uevent_var(env, "MEI_CL_UUID=%pUl", uuid)) + return -ENOMEM; - mei_cl_read_start(cldev->cl, 0, NULL); + if (add_uevent_var(env, "MEI_CL_NAME=%s", cldev->name)) + return -ENOMEM; + + if (add_uevent_var(env, "MODALIAS=mei:%s:" MEI_CL_UUID_FMT ":", + cldev->name, MEI_CL_UUID_ARGS(uuid->b))) + return -ENOMEM; return 0; } -EXPORT_SYMBOL_GPL(mei_cl_register_event_cb); -void *mei_cl_get_drvdata(const struct mei_cl_device *cldev) +static struct bus_type mei_cl_bus_type = { + .name = "mei", + .dev_groups = mei_cl_dev_groups, + .match = mei_cl_device_match, + .probe = mei_cl_device_probe, + .remove = mei_cl_device_remove, + .uevent = mei_cl_uevent, +}; + +static void mei_cl_dev_release(struct device *dev) { - return dev_get_drvdata(&cldev->dev); + struct mei_cl_device *cldev = to_mei_cl_device(dev); + + if (!cldev) + return; + + mei_me_cl_put(cldev->me_cl); + kfree(cldev); } -EXPORT_SYMBOL_GPL(mei_cl_get_drvdata); -void mei_cl_set_drvdata(struct mei_cl_device *cldev, void *data) +static struct device_type mei_cl_device_type = { + .release = mei_cl_dev_release, +}; + +struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, + uuid_le uuid) { - dev_set_drvdata(&cldev->dev, data); + struct mei_cl *cl; + + list_for_each_entry(cl, &bus->device_list, device_link) { + if (cl->cldev && cl->cldev->me_cl && + !uuid_le_cmp(uuid, *mei_me_cl_uuid(cl->cldev->me_cl))) + return cl; + } + + return NULL; } -EXPORT_SYMBOL_GPL(mei_cl_set_drvdata); -int mei_cl_enable_device(struct mei_cl_device *cldev) +struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, + struct mei_me_client *me_cl, + struct mei_cl *cl, + char *name) { - int err; - struct mei_device *bus; - struct mei_cl *cl = cldev->cl; + struct mei_cl_device *cldev; + int status; - if (cl == NULL) - return -ENODEV; + cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); + if (!cldev) + return NULL; - bus = cl->dev; + cldev->me_cl = mei_me_cl_get(me_cl); + if (!cldev->me_cl) { + kfree(cldev); + return NULL; + } - mutex_lock(&bus->device_lock); + cldev->cl = cl; + cldev->dev.parent = bus->dev; + cldev->dev.bus = &mei_cl_bus_type; + cldev->dev.type = &mei_cl_device_type; - if (mei_cl_is_connected(cl)) { - mutex_unlock(&bus->device_lock); - dev_warn(bus->dev, "Already connected"); - return -EBUSY; - } + strlcpy(cldev->name, name, sizeof(cldev->name)); - err = mei_cl_connect(cl, cldev->me_cl, NULL); - if (err < 0) { - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not connect to the ME client"); + dev_set_name(&cldev->dev, "mei:%s:%pUl", name, mei_me_cl_uuid(me_cl)); - return err; + status = device_register(&cldev->dev); + if (status) { + dev_err(bus->dev, "Failed to register MEI device\n"); + mei_me_cl_put(cldev->me_cl); + kfree(cldev); + return NULL; } - mutex_unlock(&bus->device_lock); + cl->cldev = cldev; - if (cldev->event_cb) - mei_cl_read_start(cldev->cl, 0, NULL); + dev_dbg(&cldev->dev, "client %s registered\n", name); - return 0; + return cldev; } -EXPORT_SYMBOL_GPL(mei_cl_enable_device); +EXPORT_SYMBOL_GPL(mei_cl_add_device); -int mei_cl_disable_device(struct mei_cl_device *cldev) +void mei_cl_remove_device(struct mei_cl_device *cldev) { - int err; - struct mei_device *bus; - struct mei_cl *cl = cldev->cl; - - if (cl == NULL) - return -ENODEV; - - bus = cl->dev; - - cldev->event_cb = NULL; - - mutex_lock(&bus->device_lock); + device_unregister(&cldev->dev); +} +EXPORT_SYMBOL_GPL(mei_cl_remove_device); - if (!mei_cl_is_connected(cl)) { - dev_err(bus->dev, "Already disconnected"); - err = 0; - goto out; - } +int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner) +{ + int err; - err = mei_cl_disconnect(cl); - if (err < 0) { - dev_err(bus->dev, "Could not disconnect from the ME client"); - goto out; - } + cldrv->driver.name = cldrv->name; + cldrv->driver.owner = owner; + cldrv->driver.bus = &mei_cl_bus_type; - /* Flush queues and remove any pending read */ - mei_cl_flush_queues(cl, NULL); + err = driver_register(&cldrv->driver); + if (err) + return err; -out: - mutex_unlock(&bus->device_lock); - return err; + pr_debug("mei: driver [%s] registered\n", cldrv->driver.name); + return 0; } -EXPORT_SYMBOL_GPL(mei_cl_disable_device); +EXPORT_SYMBOL_GPL(__mei_cl_driver_register); -void mei_cl_bus_rx_event(struct mei_cl *cl) +void mei_cl_driver_unregister(struct mei_cl_driver *cldrv) { - struct mei_cl_device *cldev = cl->cldev; - - if (!cldev || !cldev->event_cb) - return; - - set_bit(MEI_CL_EVENT_RX, &cldev->events); + driver_unregister(&cldrv->driver); - schedule_work(&cldev->event_work); + pr_debug("mei: driver [%s] unregistered\n", cldrv->driver.name); } +EXPORT_SYMBOL_GPL(mei_cl_driver_unregister); int __init mei_cl_bus_init(void) { -- cgit v1.1 From 38d3c00d3f312989e50aaf6f4a4b490b4e1e4c37 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:36 +0300 Subject: mei: bus: rename uevent handler to mei_cl_device_uevent Rename mei_cl_uevent to mei_cl_device_uevent to match the naming convention of mei_cl_bus_type functions Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 6ea8a40..bec213b 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -510,7 +510,15 @@ static struct attribute *mei_cl_dev_attrs[] = { }; ATTRIBUTE_GROUPS(mei_cl_dev); -static int mei_cl_uevent(struct device *dev, struct kobj_uevent_env *env) +/** + * mei_cl_device_uevent - me client bus uevent handler + * + * @dev: device + * @env: uevent kobject + * + * Return: 0 on success -ENOMEM on when add_uevent_var fails + */ +static int mei_cl_device_uevent(struct device *dev, struct kobj_uevent_env *env) { struct mei_cl_device *cldev = to_mei_cl_device(dev); const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); @@ -534,7 +542,7 @@ static struct bus_type mei_cl_bus_type = { .match = mei_cl_device_match, .probe = mei_cl_device_probe, .remove = mei_cl_device_remove, - .uevent = mei_cl_uevent, + .uevent = mei_cl_device_uevent, }; static void mei_cl_dev_release(struct device *dev) -- cgit v1.1 From 7e280ab694e2885ee300de9cf5e7047c68230148 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:37 +0300 Subject: mei: bus: don't enable events implicitly in device enable Do not enable events implicitly in mei_cl_enable_device, it should be done explicitly using mei_cl_register_event_cb so the events are enabled only when needed. The NFC drivers has been already using it that way so no need for further changes just remove the code from mei_cl_enable_device. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index bec213b..257e200 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -332,9 +332,6 @@ int mei_cl_enable_device(struct mei_cl_device *cldev) mutex_unlock(&bus->device_lock); - if (cldev->event_cb) - mei_cl_read_start(cldev->cl, 0, NULL); - return 0; } EXPORT_SYMBOL_GPL(mei_cl_enable_device); -- cgit v1.1 From 48168f4561f479403dbd38379dc8793488a22a6a Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:38 +0300 Subject: mei: bus: report if event registration failed If event registeration has failed, the caller should know about it. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 257e200..aba7688 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -256,6 +256,8 @@ void mei_cl_bus_rx_event(struct mei_cl *cl) int mei_cl_register_event_cb(struct mei_cl_device *cldev, mei_cl_event_cb_t event_cb, void *context) { + int ret; + if (cldev->event_cb) return -EALREADY; @@ -264,7 +266,9 @@ int mei_cl_register_event_cb(struct mei_cl_device *cldev, cldev->event_context = context; INIT_WORK(&cldev->event_work, mei_bus_event_work); - mei_cl_read_start(cldev->cl, 0, NULL); + ret = mei_cl_read_start(cldev->cl, 0, NULL); + if (ret && ret != -EBUSY) + return ret; return 0; } -- cgit v1.1 From 688a9cce0c8e9116038586ae1cd6adabb10fa5aa Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:39 +0300 Subject: mei: bus: revamp device matching mei_cl_device_match now calls mei_cl_device_find that returns the matching device id in the device id table. We will utilize the mei_cl_device_find during probing to locate the matching entry. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 63 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 19 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index aba7688..4955a09 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -385,39 +385,64 @@ out: } EXPORT_SYMBOL_GPL(mei_cl_disable_device); -static int mei_cl_device_match(struct device *dev, struct device_driver *drv) +/** + * mei_cl_device_find - find matching entry in the driver id table + * + * @cldev: me client device + * @cldrv: me client driver + * + * Return: id on success; NULL if no id is matching + */ +static const +struct mei_cl_device_id *mei_cl_device_find(struct mei_cl_device *cldev, + struct mei_cl_driver *cldrv) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); - struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); const struct mei_cl_device_id *id; const uuid_le *uuid; - const char *name; - - if (!cldev) - return 0; uuid = mei_me_cl_uuid(cldev->me_cl); - name = cldev->name; - - if (!cldrv || !cldrv->id_table) - return 0; id = cldrv->id_table; - while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) { - if (!uuid_le_cmp(*uuid, id->uuid)) { - if (id->name[0]) { - if (!strncmp(name, id->name, sizeof(id->name))) - return 1; - } else { - return 1; - } + + if (!cldev->name[0]) + return id; + + if (!strncmp(cldev->name, id->name, sizeof(id->name))) + return id; } id++; } + return NULL; +} + +/** + * mei_cl_device_match - device match function + * + * @dev: device + * @drv: driver + * + * Return: 1 if matching device was found 0 otherwise + */ +static int mei_cl_device_match(struct device *dev, struct device_driver *drv) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); + const struct mei_cl_device_id *found_id; + + if (!cldev) + return 0; + + if (!cldrv || !cldrv->id_table) + return 0; + + found_id = mei_cl_device_find(cldev, cldrv); + if (found_id) + return 1; + return 0; } -- cgit v1.1 From feb8cd0fe7d63fd259c28f8a52fc88745717c9ec Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:40 +0300 Subject: mei: bus: revamp probe and remove functions Instead of generating device id on the fly during probing we find the matching id entry on the device id table. Get bus the module reference counter so it cannot be unloaded after the driver has bounded to the client device Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 4955a09..1d9ce9c 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -446,30 +446,49 @@ static int mei_cl_device_match(struct device *dev, struct device_driver *drv) return 0; } +/** + * mei_cl_device_probe - bus probe function + * + * @dev: device + * + * Return: 0 on success; < 0 otherwise + */ static int mei_cl_device_probe(struct device *dev) { - struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_device *cldev; struct mei_cl_driver *cldrv; - struct mei_cl_device_id id; + const struct mei_cl_device_id *id; + + cldev = to_mei_cl_device(dev); + cldrv = to_mei_cl_driver(dev->driver); if (!cldev) return 0; - cldrv = to_mei_cl_driver(dev->driver); if (!cldrv || !cldrv->probe) return -ENODEV; - dev_dbg(dev, "Device probe\n"); + id = mei_cl_device_find(cldev, cldrv); + if (!id) + return -ENODEV; - strlcpy(id.name, cldev->name, sizeof(id.name)); + __module_get(THIS_MODULE); - return cldrv->probe(cldev, &id); + return cldrv->probe(cldev, id); } +/** + * mei_cl_device_remove - remove device from the bus + * + * @dev: device + * + * Return: 0 on success; < 0 otherwise + */ static int mei_cl_device_remove(struct device *dev) { struct mei_cl_device *cldev = to_mei_cl_device(dev); struct mei_cl_driver *cldrv; + int ret = 0; if (!cldev || !dev->driver) return 0; @@ -480,13 +499,13 @@ static int mei_cl_device_remove(struct device *dev) } cldrv = to_mei_cl_driver(dev->driver); - if (!cldrv->remove) { - dev->driver = NULL; + if (cldrv->remove) + ret = cldrv->remove(cldev); - return 0; - } + module_put(THIS_MODULE); + dev->driver = NULL; + return ret; - return cldrv->remove(cldev); } static ssize_t name_show(struct device *dev, struct device_attribute *a, -- cgit v1.1 From 512f64d9f7467597388ffbd5a21589ee3f375d8b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:41 +0300 Subject: mei: bus: add reference to bus device in struct mei_cl_client Add reference to the bus device (mei_device) for easier access. To ensures that referencing cldev->bus is valid during cldev life time we increase the bus ref counter on a client device creation and drop it on the device release. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 17 +++++++++++++++++ include/linux/mei_cl_bus.h | 3 +++ 2 files changed, 20 insertions(+) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 1d9ce9c..963731e 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -590,6 +590,20 @@ static struct bus_type mei_cl_bus_type = { .uevent = mei_cl_device_uevent, }; +static struct mei_device *mei_dev_bus_get(struct mei_device *bus) +{ + if (bus) + get_device(bus->dev); + + return bus; +} + +static void mei_dev_bus_put(struct mei_device *bus) +{ + if (bus) + put_device(bus->dev); +} + static void mei_cl_dev_release(struct device *dev) { struct mei_cl_device *cldev = to_mei_cl_device(dev); @@ -598,6 +612,7 @@ static void mei_cl_dev_release(struct device *dev) return; mei_me_cl_put(cldev->me_cl); + mei_dev_bus_put(cldev->bus); kfree(cldev); } @@ -641,6 +656,7 @@ struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, cldev->dev.parent = bus->dev; cldev->dev.bus = &mei_cl_bus_type; cldev->dev.type = &mei_cl_device_type; + cldev->bus = mei_dev_bus_get(bus); strlcpy(cldev->name, name, sizeof(cldev->name)); @@ -650,6 +666,7 @@ struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, if (status) { dev_err(bus->dev, "Failed to register MEI device\n"); mei_me_cl_put(cldev->me_cl); + mei_dev_bus_put(bus); kfree(cldev); return NULL; } diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index a16b1f9..4c5c25b 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -6,6 +6,7 @@ #include struct mei_cl_device; +struct mei_device; typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, u32 events, void *context); @@ -17,6 +18,7 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * Drivers for MEI devices will get an mei_cl_device pointer * when being probed and shall use it for doing ME bus I/O. * + * @bus: parent mei device * @dev: linux driver model device pointer * @me_cl: me client * @cl: mei client @@ -29,6 +31,7 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * @priv_data: client private data */ struct mei_cl_device { + struct mei_device *bus; struct device dev; struct mei_me_client *me_cl; -- cgit v1.1 From 0ff0a8d853039aa60bba3ca3e04e4fb74584a736 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:42 +0300 Subject: mei: bus: add me client device list infrastructure Instead of holding the list of host clients (me_cl) we want to keep the list me client devices (mei_cl_device) This way we can create host to me client connection only when needed. Add list head to mei_cl_device and cl_bus_lock Add bus_added flag to the me client (mei_me_client) to track if the appropriate mei_cl_device was already created and is_added flag to mei_cl_device to track if it was already added to the device list across the bus rescans Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 1 + drivers/misc/mei/init.c | 1 + drivers/misc/mei/mei_dev.h | 6 ++++-- include/linux/mei_cl_bus.h | 4 ++++ 4 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 963731e..34b14dd 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -657,6 +657,7 @@ struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, cldev->dev.bus = &mei_cl_bus_type; cldev->dev.type = &mei_cl_device_type; cldev->bus = mei_dev_bus_get(bus); + INIT_LIST_HEAD(&cldev->bus_list); strlcpy(cldev->name, name, sizeof(cldev->name)); diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 00c3865..15000e9 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -390,6 +390,7 @@ void mei_device_init(struct mei_device *dev, INIT_LIST_HEAD(&dev->me_clients); mutex_init(&dev->device_lock); init_rwsem(&dev->me_clients_rwsem); + mutex_init(&dev->cl_bus_lock); init_waitqueue_head(&dev->wait_hw_ready); init_waitqueue_head(&dev->wait_pg); init_waitqueue_head(&dev->wait_hbm_start); diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index bc65fb4..882e6f7 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -178,7 +178,7 @@ struct mei_fw_status { * @client_id: me client id * @mei_flow_ctrl_creds: flow control credits * @connect_count: number connections to this client - * @reserved: reserved + * @bus_added: added to bus */ struct mei_me_client { struct list_head list; @@ -187,7 +187,7 @@ struct mei_me_client { u8 client_id; u8 mei_flow_ctrl_creds; u8 connect_count; - u8 reserved; + u8 bus_added; }; @@ -447,6 +447,7 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @reset_work : work item for the device reset * * @device_list : mei client bus list + * @cl_bus_lock : client bus list lock * * @dbgfs_dir : debugfs mei root directory * @@ -543,6 +544,7 @@ struct mei_device { /* List of bus devices */ struct list_head device_list; + struct mutex cl_bus_lock; #if IS_ENABLED(CONFIG_DEBUG_FS) struct dentry *dbgfs_dir; diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 4c5c25b..8523913 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -18,6 +18,7 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * Drivers for MEI devices will get an mei_cl_device pointer * when being probed and shall use it for doing ME bus I/O. * + * @bus_list: device on the bus list * @bus: parent mei device * @dev: linux driver model device pointer * @me_cl: me client @@ -28,9 +29,11 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * events (e.g. Rx buffer pending) notifications. * @event_context: event callback run context * @events: Events bitmask sent to the driver. + * @is_added: device is already scanned * @priv_data: client private data */ struct mei_cl_device { + struct list_head bus_list; struct mei_device *bus; struct device dev; @@ -42,6 +45,7 @@ struct mei_cl_device { mei_cl_event_cb_t event_cb; void *event_context; unsigned long events; + unsigned int is_added:1; void *priv_data; }; -- cgit v1.1 From 71ce789115f878a07e4a6c43d6006cea6aee1078 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:43 +0300 Subject: mei: bus: enable running fixup routines before device registration Split the device registration into allocation and device struct initialization, device setup, and the final device registration. This why it is possible to run fixups and quirks during the setup stage on an initialized device. Each fixup routine effects do_match flag. If the flag is set to false at the end the device won't be registered on the bus. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 30 +++++++++++++++ drivers/misc/mei/bus.c | 91 ++++++++++++++++++++++++++++++++++++-------- drivers/misc/mei/mei_dev.h | 2 +- include/linux/mei_cl_bus.h | 4 ++ 4 files changed, 111 insertions(+), 16 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 47aa152..865e33b 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -20,12 +20,15 @@ #include #include #include +#include #include #include "mei_dev.h" #include "client.h" +#define MEI_UUID_ANY NULL_UUID_LE + struct mei_nfc_cmd { u8 command; u8 status; @@ -412,4 +415,31 @@ void mei_nfc_host_exit(struct mei_device *bus) mutex_unlock(&bus->device_lock); } +#define MEI_FIXUP(_uuid, _hook) { _uuid, _hook } + +static struct mei_fixup { + + const uuid_le uuid; + void (*hook)(struct mei_cl_device *cldev); +} mei_fixups[] = {}; + +/** + * mei_cl_dev_fixup - run fixup handlers + * + * @cldev: me client device + */ +void mei_cl_dev_fixup(struct mei_cl_device *cldev) +{ + struct mei_fixup *f; + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + int i; + + for (i = 0; i < ARRAY_SIZE(mei_fixups); i++) { + + f = &mei_fixups[i]; + if (uuid_le_cmp(f->uuid, MEI_UUID_ANY) == 0 || + uuid_le_cmp(f->uuid, *uuid) == 0) + f->hook(cldev); + } +} diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 34b14dd..68b7756 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -436,6 +436,9 @@ static int mei_cl_device_match(struct device *dev, struct device_driver *drv) if (!cldev) return 0; + if (!cldev->do_match) + return 0; + if (!cldrv || !cldrv->id_table) return 0; @@ -634,6 +637,76 @@ struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, return NULL; } +/** + * mei_cl_dev_alloc - initialize and allocate mei client device + * + * @bus: mei device + * @me_cl: me client + * + * Return: allocated device structur or NULL on allocation failure + */ +static struct mei_cl_device *mei_cl_dev_alloc(struct mei_device *bus, + struct mei_me_client *me_cl) +{ + struct mei_cl_device *cldev; + + cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); + if (!cldev) + return NULL; + + device_initialize(&cldev->dev); + cldev->dev.parent = bus->dev; + cldev->dev.bus = &mei_cl_bus_type; + cldev->dev.type = &mei_cl_device_type; + cldev->bus = mei_dev_bus_get(bus); + cldev->me_cl = mei_me_cl_get(me_cl); + cldev->is_added = 0; + INIT_LIST_HEAD(&cldev->bus_list); + + return cldev; +} + +/** + * mei_cl_dev_setup - setup me client device + * run fix up routines and set the device name + * + * @bus: mei device + * @cldev: me client device + * + * Return: true if the device is eligible for enumeration + */ +static bool mei_cl_dev_setup(struct mei_device *bus, + struct mei_cl_device *cldev) +{ + cldev->do_match = 1; + mei_cl_dev_fixup(cldev); + + if (cldev->do_match) + dev_set_name(&cldev->dev, "mei:%s:%pUl", + cldev->name, mei_me_cl_uuid(cldev->me_cl)); + + return cldev->do_match == 1; +} + +/** + * mei_cl_bus_dev_add - add me client devices + * + * @cldev: me client device + * + * Return: 0 on success; < 0 on failre + */ +static int mei_cl_bus_dev_add(struct mei_cl_device *cldev) +{ + int ret; + + dev_dbg(cldev->bus->dev, "adding %pUL\n", mei_me_cl_uuid(cldev->me_cl)); + ret = device_add(&cldev->dev); + if (!ret) + cldev->is_added = 1; + + return ret; +} + struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_me_client *me_cl, struct mei_cl *cl, @@ -642,28 +715,16 @@ struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_cl_device *cldev; int status; - cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL); + cldev = mei_cl_dev_alloc(bus, me_cl); if (!cldev) return NULL; - cldev->me_cl = mei_me_cl_get(me_cl); - if (!cldev->me_cl) { - kfree(cldev); - return NULL; - } - cldev->cl = cl; - cldev->dev.parent = bus->dev; - cldev->dev.bus = &mei_cl_bus_type; - cldev->dev.type = &mei_cl_device_type; - cldev->bus = mei_dev_bus_get(bus); - INIT_LIST_HEAD(&cldev->bus_list); - strlcpy(cldev->name, name, sizeof(cldev->name)); - dev_set_name(&cldev->dev, "mei:%s:%pUl", name, mei_me_cl_uuid(me_cl)); + mei_cl_dev_setup(bus, cldev); - status = device_register(&cldev->dev); + status = mei_cl_bus_dev_add(cldev); if (status) { dev_err(bus->dev, "Failed to register MEI device\n"); mei_me_cl_put(cldev->me_cl); diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 882e6f7..ad59ab7 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -335,7 +335,7 @@ struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_cl *cl, char *name); void mei_cl_remove_device(struct mei_cl_device *cldev); - +void mei_cl_dev_fixup(struct mei_cl_device *dev); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking); ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length); diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 8523913..81ab56d 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -29,6 +29,8 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * events (e.g. Rx buffer pending) notifications. * @event_context: event callback run context * @events: Events bitmask sent to the driver. + * + * @do_match: wheather device can be matched with a driver * @is_added: device is already scanned * @priv_data: client private data */ @@ -45,6 +47,8 @@ struct mei_cl_device { mei_cl_event_cb_t event_cb; void *event_context; unsigned long events; + + unsigned int do_match:1; unsigned int is_added:1; void *priv_data; -- cgit v1.1 From 5b6dca29b416d8992d52d814aa4be5d7fc97799d Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:44 +0300 Subject: mei: bus: blacklist the nfc info client Blacklist nfc info client which is only used for retrieval of the NFC radio version Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 865e33b..696918a 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -27,8 +27,23 @@ #include "mei_dev.h" #include "client.h" +#define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \ + 0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06) + #define MEI_UUID_ANY NULL_UUID_LE +/** + * blacklist - blacklist a client from the bus + * + * @cldev: me clients device + */ +static void blacklist(struct mei_cl_device *cldev) +{ + dev_dbg(&cldev->dev, "running hook %s on %pUl\n", + __func__, mei_me_cl_uuid(cldev->me_cl)); + cldev->do_match = 0; +} + struct mei_nfc_cmd { u8 command; u8 status; @@ -120,9 +135,7 @@ const uuid_le mei_nfc_guid = UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c); -static const uuid_le mei_nfc_info_guid = UUID_LE(0xd2de1625, 0x382d, 0x417d, - 0x48, 0xa4, 0xef, 0xab, - 0xba, 0x8a, 0x12, 0x06); +static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; /* Vendors */ #define MEI_NFC_VENDOR_INSIDE 0x00 @@ -421,7 +434,9 @@ static struct mei_fixup { const uuid_le uuid; void (*hook)(struct mei_cl_device *cldev); -} mei_fixups[] = {}; +} mei_fixups[] = { + MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), +}; /** * mei_cl_dev_fixup - run fixup handlers -- cgit v1.1 From dd070a1694c563bd7ba5239dd3038ff1420cf856 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:45 +0300 Subject: mei: bus: blacklist clients by number of connections Currently we support only clients with single connection and fixed address clients so all other clients are blacklisted Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 696918a..fd6470f 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -33,6 +33,24 @@ #define MEI_UUID_ANY NULL_UUID_LE /** + * number_of_connections - determine whether an client be on the bus + * according number of connections + * We support only clients: + * 1. with single connection + * 2. and fixed clients (max_number_of_connections == 0) + * + * @cldev: me clients device + */ +static void number_of_connections(struct mei_cl_device *cldev) +{ + dev_dbg(&cldev->dev, "running hook %s on %pUl\n", + __func__, mei_me_cl_uuid(cldev->me_cl)); + + if (cldev->me_cl->props.max_number_of_connections > 1) + cldev->do_match = 0; +} + +/** * blacklist - blacklist a client from the bus * * @cldev: me clients device @@ -435,6 +453,7 @@ static struct mei_fixup { const uuid_le uuid; void (*hook)(struct mei_cl_device *cldev); } mei_fixups[] = { + MEI_FIXUP(MEI_UUID_ANY, number_of_connections), MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), }; -- cgit v1.1 From b39910c2e0ac7c3d0e2f1999b04308c771b1d8fc Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:46 +0300 Subject: mei: bus: simplify how we build nfc bus name Remove the dependency on struct ndev from the nfc device name creation function so it is possible to use it in a fixup routine Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 115 ++++++++++++++++++++----------------------- drivers/misc/mei/bus.c | 2 +- drivers/misc/mei/mei_dev.h | 2 +- 3 files changed, 55 insertions(+), 64 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index fd6470f..a4c6719 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -145,7 +145,7 @@ struct mei_nfc_dev { u8 fw_ivn; u8 vendor_id; u8 radio_type; - char *bus_name; + const char *bus_name; }; /* UUIDs for NFC F/W clients */ @@ -184,69 +184,30 @@ static void mei_nfc_free(struct mei_nfc_dev *ndev) kfree(ndev); } -static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) -{ - struct mei_device *bus; - - if (!ndev->cl) - return -ENODEV; - - bus = ndev->cl->dev; - - switch (ndev->vendor_id) { - case MEI_NFC_VENDOR_INSIDE: - switch (ndev->radio_type) { - case MEI_NFC_VENDOR_INSIDE_UREAD: - ndev->bus_name = "microread"; - return 0; - - default: - dev_err(bus->dev, "Unknown radio type 0x%x\n", - ndev->radio_type); - - return -EINVAL; - } - - case MEI_NFC_VENDOR_NXP: - switch (ndev->radio_type) { - case MEI_NFC_VENDOR_NXP_PN544: - ndev->bus_name = "pn544"; - return 0; - default: - dev_err(bus->dev, "Unknown radio type 0x%x\n", - ndev->radio_type); - - return -EINVAL; - } - - default: - dev_err(bus->dev, "Unknown vendor ID 0x%x\n", - ndev->vendor_id); - - return -EINVAL; - } - - return 0; -} - -static int mei_nfc_if_version(struct mei_nfc_dev *ndev) +/** + * mei_nfc_if_version - get NFC interface version + * + * @cl: host client (nfc info) + * @ver: NFC interface version to be filled in + * + * Return: 0 on success; < 0 otherwise + */ +static int mei_nfc_if_version(struct mei_cl *cl, + struct mei_nfc_if_version *ver) { struct mei_device *bus; - struct mei_cl *cl; - - struct mei_nfc_cmd cmd; + struct mei_nfc_cmd cmd = { + .command = MEI_NFC_CMD_MAINTENANCE, + .data_size = 1, + .sub_command = MEI_NFC_SUBCMD_IF_VERSION, + }; struct mei_nfc_reply *reply = NULL; - struct mei_nfc_if_version *version; size_t if_version_length; int bytes_recv, ret; - cl = ndev->cl_info; bus = cl->dev; - memset(&cmd, 0, sizeof(struct mei_nfc_cmd)); - cmd.command = MEI_NFC_CMD_MAINTENANCE; - cmd.data_size = 1; - cmd.sub_command = MEI_NFC_SUBCMD_IF_VERSION; + WARN_ON(mutex_is_locked(&bus->device_lock)); ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1); if (ret < 0) { @@ -262,6 +223,7 @@ static int mei_nfc_if_version(struct mei_nfc_dev *ndev) if (!reply) return -ENOMEM; + ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { dev_err(bus->dev, "Could not read IF version\n"); @@ -269,17 +231,39 @@ static int mei_nfc_if_version(struct mei_nfc_dev *ndev) goto err; } - version = (struct mei_nfc_if_version *)reply->data; + memcpy(ver, reply->data, sizeof(struct mei_nfc_if_version)); - ndev->fw_ivn = version->fw_ivn; - ndev->vendor_id = version->vendor_id; - ndev->radio_type = version->radio_type; + dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", + ver->fw_ivn, ver->vendor_id, ver->radio_type); err: kfree(reply); return ret; } +/** + * mei_nfc_radio_name - derive nfc radio name from the interface version + * + * @ver: NFC radio version + * + * Return: radio name string + */ +static const char *mei_nfc_radio_name(struct mei_nfc_if_version *ver) +{ + + if (ver->vendor_id == MEI_NFC_VENDOR_INSIDE) { + if (ver->radio_type == MEI_NFC_VENDOR_INSIDE_UREAD) + return "microread"; + } + + if (ver->vendor_id == MEI_NFC_VENDOR_NXP) { + if (ver->radio_type == MEI_NFC_VENDOR_NXP_PN544) + return "pn544"; + } + + return NULL; +} + static void mei_nfc_init(struct work_struct *work) { struct mei_device *bus; @@ -287,6 +271,7 @@ static void mei_nfc_init(struct work_struct *work) struct mei_nfc_dev *ndev; struct mei_cl *cl_info; struct mei_me_client *me_cl_info; + struct mei_nfc_if_version version; ndev = container_of(work, struct mei_nfc_dev, init_work); @@ -313,12 +298,16 @@ static void mei_nfc_init(struct work_struct *work) mei_me_cl_put(me_cl_info); mutex_unlock(&bus->device_lock); - if (mei_nfc_if_version(ndev) < 0) { + if (mei_nfc_if_version(cl_info, &version) < 0) { dev_err(bus->dev, "Could not get the NFC interface version"); goto err; } + ndev->fw_ivn = version.fw_ivn; + ndev->vendor_id = version.vendor_id; + ndev->radio_type = version.radio_type; + dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", ndev->fw_ivn, ndev->vendor_id, ndev->radio_type); @@ -333,7 +322,9 @@ static void mei_nfc_init(struct work_struct *work) mutex_unlock(&bus->device_lock); - if (mei_nfc_build_bus_name(ndev) < 0) { + ndev->bus_name = mei_nfc_radio_name(&version); + + if (!ndev->bus_name) { dev_err(bus->dev, "Could not build the bus ID name\n"); return; } diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 68b7756..7e51700 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -710,7 +710,7 @@ static int mei_cl_bus_dev_add(struct mei_cl_device *cldev) struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_me_client *me_cl, struct mei_cl *cl, - char *name) + const char *name) { struct mei_cl_device *cldev; int status; diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index ad59ab7..7098dca 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -333,7 +333,7 @@ struct mei_hw_ops { struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, struct mei_me_client *me_cl, struct mei_cl *cl, - char *name); + const char *name); void mei_cl_remove_device(struct mei_cl_device *cldev); void mei_cl_dev_fixup(struct mei_cl_device *dev); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, -- cgit v1.1 From 6009595a66e460af0b170d736398c49395cb4499 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 15:08:47 +0300 Subject: mei: bus: link client devices instead of host clients MEI bus was designed around nfc and was hard to extend. Instead of the hard coded way of adding the devices on the mei bus we scan the whole me client list and create a device for each eligible me client (mei_cl_bus_rescan); currently we support only clients with single connection and fixed address clients. NFC radio name detection is run as a fixup routine The patch replaces handling the device list based on struct me_cl to device list based on me_cl_devices. The creating a connection is pushed from the device creation time to device enablement. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 288 ++++++++++--------------------------------- drivers/misc/mei/bus.c | 213 ++++++++++++++++++++++---------- drivers/misc/mei/client.c | 9 +- drivers/misc/mei/init.c | 2 +- drivers/misc/mei/mei_dev.h | 11 +- 5 files changed, 213 insertions(+), 310 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index a4c6719..3e536ca 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -30,6 +30,11 @@ #define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \ 0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06) +static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; + +#define MEI_UUID_NFC_HCI UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \ + 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) + #define MEI_UUID_ANY NULL_UUID_LE /** @@ -93,68 +98,10 @@ struct mei_nfc_if_version { u8 radio_type; } __packed; -struct mei_nfc_connect { - u8 fw_ivn; - u8 vendor_id; -} __packed; - -struct mei_nfc_connect_resp { - u8 fw_ivn; - u8 vendor_id; - u16 me_major; - u16 me_minor; - u16 me_hotfix; - u16 me_build; -} __packed; - -struct mei_nfc_hci_hdr { - u8 cmd; - u8 status; - u16 req_id; - u32 reserved; - u16 data_size; -} __packed; #define MEI_NFC_CMD_MAINTENANCE 0x00 -#define MEI_NFC_CMD_HCI_SEND 0x01 -#define MEI_NFC_CMD_HCI_RECV 0x02 - -#define MEI_NFC_SUBCMD_CONNECT 0x00 #define MEI_NFC_SUBCMD_IF_VERSION 0x01 -#define MEI_NFC_HEADER_SIZE 10 - -/** - * struct mei_nfc_dev - NFC mei device - * - * @me_cl: NFC me client - * @cl: NFC host client - * @cl_info: NFC info host client - * @init_work: perform connection to the info client - * @fw_ivn: NFC Interface Version Number - * @vendor_id: NFC manufacturer ID - * @radio_type: NFC radio type - * @bus_name: bus name - * - */ -struct mei_nfc_dev { - struct mei_me_client *me_cl; - struct mei_cl *cl; - struct mei_cl *cl_info; - struct work_struct init_work; - u8 fw_ivn; - u8 vendor_id; - u8 radio_type; - const char *bus_name; -}; - -/* UUIDs for NFC F/W clients */ -const uuid_le mei_nfc_guid = UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, - 0x94, 0xd4, 0x50, 0x26, - 0x67, 0x23, 0x77, 0x5c); - -static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; - /* Vendors */ #define MEI_NFC_VENDOR_INSIDE 0x00 #define MEI_NFC_VENDOR_NXP 0x01 @@ -163,27 +110,6 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; #define MEI_NFC_VENDOR_INSIDE_UREAD 0x00 #define MEI_NFC_VENDOR_NXP_PN544 0x01 -static void mei_nfc_free(struct mei_nfc_dev *ndev) -{ - if (!ndev) - return; - - if (ndev->cl) { - list_del(&ndev->cl->device_link); - mei_cl_unlink(ndev->cl); - kfree(ndev->cl); - } - - if (ndev->cl_info) { - list_del(&ndev->cl_info->device_link); - mei_cl_unlink(ndev->cl_info); - kfree(ndev->cl_info); - } - - mei_me_cl_put(ndev->me_cl); - kfree(ndev); -} - /** * mei_nfc_if_version - get NFC interface version * @@ -264,177 +190,86 @@ static const char *mei_nfc_radio_name(struct mei_nfc_if_version *ver) return NULL; } -static void mei_nfc_init(struct work_struct *work) +/** + * mei_nfc - The nfc fixup function. The function retrieves nfc radio + * name and set is as device attribute so we can load + * the proper device driver for it + * + * @cldev: me client device (nfc) + */ +static void mei_nfc(struct mei_cl_device *cldev) { struct mei_device *bus; - struct mei_cl_device *cldev; - struct mei_nfc_dev *ndev; - struct mei_cl *cl_info; - struct mei_me_client *me_cl_info; - struct mei_nfc_if_version version; + struct mei_cl *cl; + struct mei_me_client *me_cl = NULL; + struct mei_nfc_if_version ver; + const char *radio_name = NULL; + int ret; - ndev = container_of(work, struct mei_nfc_dev, init_work); + bus = cldev->bus; - cl_info = ndev->cl_info; - bus = cl_info->dev; + dev_dbg(bus->dev, "running hook %s: %pUl match=%d\n", + __func__, mei_me_cl_uuid(cldev->me_cl), cldev->do_match); mutex_lock(&bus->device_lock); - - /* check for valid client id */ - me_cl_info = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); - if (!me_cl_info) { - mutex_unlock(&bus->device_lock); - dev_info(bus->dev, "nfc: failed to find the info client\n"); - goto err; - } - - if (mei_cl_connect(cl_info, me_cl_info, NULL) < 0) { - mei_me_cl_put(me_cl_info); - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not connect to the NFC INFO ME client"); - - goto err; + /* we need to connect to INFO GUID */ + cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + if (IS_ERR(cl)) { + ret = PTR_ERR(cl); + cl = NULL; + dev_err(bus->dev, "nfc hook alloc failed %d\n", ret); + goto out; } - mei_me_cl_put(me_cl_info); - mutex_unlock(&bus->device_lock); - if (mei_nfc_if_version(cl_info, &version) < 0) { - dev_err(bus->dev, "Could not get the NFC interface version"); - - goto err; + me_cl = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); + if (!me_cl) { + ret = -ENOTTY; + dev_err(bus->dev, "Cannot find nfc info %d\n", ret); + goto out; } - ndev->fw_ivn = version.fw_ivn; - ndev->vendor_id = version.vendor_id; - ndev->radio_type = version.radio_type; - - dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", - ndev->fw_ivn, ndev->vendor_id, ndev->radio_type); - - mutex_lock(&bus->device_lock); - - if (mei_cl_disconnect(cl_info) < 0) { - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not disconnect the NFC INFO ME client"); - - goto err; + ret = mei_cl_connect(cl, me_cl, NULL); + if (ret < 0) { + dev_err(&cldev->dev, "Can't connect to the NFC INFO ME ret = %d\n", + ret); + goto out; } mutex_unlock(&bus->device_lock); - ndev->bus_name = mei_nfc_radio_name(&version); + ret = mei_nfc_if_version(cl, &ver); + if (ret) + goto disconnect; - if (!ndev->bus_name) { - dev_err(bus->dev, "Could not build the bus ID name\n"); - return; - } + radio_name = mei_nfc_radio_name(&ver); - cldev = mei_cl_add_device(bus, ndev->me_cl, ndev->cl, - ndev->bus_name); - if (!cldev) { - dev_err(bus->dev, "Could not add the NFC device to the MEI bus\n"); - - goto err; + if (!radio_name) { + ret = -ENOENT; + dev_err(&cldev->dev, "Can't get the NFC interface version ret = %d\n", + ret); + goto disconnect; } - cldev->priv_data = ndev; - - - return; + dev_dbg(bus->dev, "nfc radio %s\n", radio_name); + strlcpy(cldev->name, radio_name, sizeof(cldev->name)); -err: +disconnect: mutex_lock(&bus->device_lock); - mei_nfc_free(ndev); - mutex_unlock(&bus->device_lock); + if (mei_cl_disconnect(cl) < 0) + dev_err(bus->dev, "Can't disconnect the NFC INFO ME\n"); -} + mei_cl_flush_queues(cl, NULL); +out: + mei_cl_unlink(cl); + mutex_unlock(&bus->device_lock); + mei_me_cl_put(me_cl); + kfree(cl); -int mei_nfc_host_init(struct mei_device *bus, struct mei_me_client *me_cl) -{ - struct mei_nfc_dev *ndev; - struct mei_cl *cl_info, *cl; - int ret; - - - /* in case of internal reset bail out - * as the device is already setup - */ - cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); - if (cl) - return 0; - - ndev = kzalloc(sizeof(struct mei_nfc_dev), GFP_KERNEL); - if (!ndev) { - ret = -ENOMEM; - goto err; - } - - ndev->me_cl = mei_me_cl_get(me_cl); - if (!ndev->me_cl) { - ret = -ENODEV; - goto err; - } - - cl_info = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); - if (IS_ERR(cl_info)) { - ret = PTR_ERR(cl_info); - goto err; - } - - list_add_tail(&cl_info->device_link, &bus->device_list); - - ndev->cl_info = cl_info; - - cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); - if (IS_ERR(cl)) { - ret = PTR_ERR(cl); - goto err; - } - - list_add_tail(&cl->device_link, &bus->device_list); - - ndev->cl = cl; - - INIT_WORK(&ndev->init_work, mei_nfc_init); - schedule_work(&ndev->init_work); - - return 0; - -err: - mei_nfc_free(ndev); - - return ret; -} - -void mei_nfc_host_exit(struct mei_device *bus) -{ - struct mei_nfc_dev *ndev; - struct mei_cl *cl; - struct mei_cl_device *cldev; - - cl = mei_cl_bus_find_cl_by_uuid(bus, mei_nfc_guid); - if (!cl) - return; - - cldev = cl->cldev; - if (!cldev) - return; - - ndev = (struct mei_nfc_dev *)cldev->priv_data; - if (ndev) - cancel_work_sync(&ndev->init_work); - - cldev->priv_data = NULL; - - /* Need to remove the device here - * since mei_nfc_free will unlink the clients - */ - mei_cl_remove_device(cldev); + if (ret) + cldev->do_match = 0; - mutex_lock(&bus->device_lock); - mei_nfc_free(ndev); - mutex_unlock(&bus->device_lock); + dev_dbg(bus->dev, "end of fixup match = %d\n", cldev->do_match); } #define MEI_FIXUP(_uuid, _hook) { _uuid, _hook } @@ -446,6 +281,7 @@ static struct mei_fixup { } mei_fixups[] = { MEI_FIXUP(MEI_UUID_ANY, number_of_connections), MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), + MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc), }; /** diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 7e51700..3ab08e5 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -309,34 +309,43 @@ EXPORT_SYMBOL_GPL(mei_cl_set_drvdata); */ int mei_cl_enable_device(struct mei_cl_device *cldev) { - int err; - struct mei_device *bus; - struct mei_cl *cl = cldev->cl; + struct mei_device *bus = cldev->bus; + struct mei_cl *cl; + int ret; - if (cl == NULL) - return -ENODEV; + cl = cldev->cl; - bus = cl->dev; + if (!cl) { + mutex_lock(&bus->device_lock); + cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + mutex_unlock(&bus->device_lock); + if (IS_ERR(cl)) + return PTR_ERR(cl); + /* update pointers */ + cldev->cl = cl; + cl->cldev = cldev; + } mutex_lock(&bus->device_lock); - if (mei_cl_is_connected(cl)) { - mutex_unlock(&bus->device_lock); - dev_warn(bus->dev, "Already connected"); - return -EBUSY; + ret = 0; + goto out; } - err = mei_cl_connect(cl, cldev->me_cl, NULL); - if (err < 0) { - mutex_unlock(&bus->device_lock); - dev_err(bus->dev, "Could not connect to the ME client"); - - return err; + if (!mei_me_cl_is_active(cldev->me_cl)) { + dev_err(&cldev->dev, "me client is not active\n"); + ret = -ENOTTY; + goto out; } + ret = mei_cl_connect(cl, cldev->me_cl, NULL); + if (ret < 0) + dev_err(&cldev->dev, "cannot connect\n"); + +out: mutex_unlock(&bus->device_lock); - return 0; + return ret; } EXPORT_SYMBOL_GPL(mei_cl_enable_device); @@ -350,14 +359,16 @@ EXPORT_SYMBOL_GPL(mei_cl_enable_device); */ int mei_cl_disable_device(struct mei_cl_device *cldev) { - int err; struct mei_device *bus; - struct mei_cl *cl = cldev->cl; + struct mei_cl *cl; + int err; - if (cl == NULL) + if (!cldev || !cldev->cl) return -ENODEV; - bus = cl->dev; + cl = cldev->cl; + + bus = cldev->bus; cldev->event_cb = NULL; @@ -370,18 +381,19 @@ int mei_cl_disable_device(struct mei_cl_device *cldev) } err = mei_cl_disconnect(cl); - if (err < 0) { + if (err < 0) dev_err(bus->dev, "Could not disconnect from the ME client"); - goto out; - } +out: /* Flush queues and remove any pending read */ mei_cl_flush_queues(cl, NULL); + mei_cl_unlink(cl); + + kfree(cl); + cldev->cl = NULL; -out: mutex_unlock(&bus->device_lock); return err; - } EXPORT_SYMBOL_GPL(mei_cl_disable_device); @@ -623,20 +635,6 @@ static struct device_type mei_cl_device_type = { .release = mei_cl_dev_release, }; -struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, - uuid_le uuid) -{ - struct mei_cl *cl; - - list_for_each_entry(cl, &bus->device_list, device_link) { - if (cl->cldev && cl->cldev->me_cl && - !uuid_le_cmp(uuid, *mei_me_cl_uuid(cl->cldev->me_cl))) - return cl; - } - - return NULL; -} - /** * mei_cl_dev_alloc - initialize and allocate mei client device * @@ -707,45 +705,127 @@ static int mei_cl_bus_dev_add(struct mei_cl_device *cldev) return ret; } -struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, - struct mei_me_client *me_cl, - struct mei_cl *cl, - const char *name) +/** + * mei_cl_bus_dev_stop - stop the driver + * + * @cldev: me client device + */ +static void mei_cl_bus_dev_stop(struct mei_cl_device *cldev) +{ + if (cldev->is_added) + device_release_driver(&cldev->dev); +} + +/** + * mei_cl_bus_dev_destroy - destroy me client devices object + * + * @cldev: me client device + */ +static void mei_cl_bus_dev_destroy(struct mei_cl_device *cldev) +{ + if (!cldev->is_added) + return; + + device_del(&cldev->dev); + + mutex_lock(&cldev->bus->cl_bus_lock); + list_del_init(&cldev->bus_list); + mutex_unlock(&cldev->bus->cl_bus_lock); + + cldev->is_added = 0; + put_device(&cldev->dev); +} + +/** + * mei_cl_bus_remove_device - remove a devices form the bus + * + * @cldev: me client device + */ +static void mei_cl_bus_remove_device(struct mei_cl_device *cldev) +{ + mei_cl_bus_dev_stop(cldev); + mei_cl_bus_dev_destroy(cldev); +} + +/** + * mei_cl_bus_remove_devices - remove all devices form the bus + * + * @bus: mei device + */ +void mei_cl_bus_remove_devices(struct mei_device *bus) +{ + struct mei_cl_device *cldev, *next; + + list_for_each_entry_safe(cldev, next, &bus->device_list, bus_list) + mei_cl_bus_remove_device(cldev); +} + + +/** + * mei_cl_dev_init - allocate and initializes an mei client devices + * based on me client + * + * @bus: mei device + * @me_cl: me client + */ +static void mei_cl_dev_init(struct mei_device *bus, struct mei_me_client *me_cl) { struct mei_cl_device *cldev; - int status; + + dev_dbg(bus->dev, "initializing %pUl", mei_me_cl_uuid(me_cl)); + + if (me_cl->bus_added) + return; cldev = mei_cl_dev_alloc(bus, me_cl); if (!cldev) - return NULL; + return; - cldev->cl = cl; - strlcpy(cldev->name, name, sizeof(cldev->name)); + mutex_lock(&cldev->bus->cl_bus_lock); + me_cl->bus_added = true; + list_add_tail(&cldev->bus_list, &bus->device_list); + mutex_unlock(&cldev->bus->cl_bus_lock); - mei_cl_dev_setup(bus, cldev); +} - status = mei_cl_bus_dev_add(cldev); - if (status) { - dev_err(bus->dev, "Failed to register MEI device\n"); - mei_me_cl_put(cldev->me_cl); - mei_dev_bus_put(bus); - kfree(cldev); - return NULL; - } +/** + * mei_cl_bus_rescan - scan me clients list and add create + * devices for eligible clients + * + * @bus: mei device + */ +void mei_cl_bus_rescan(struct mei_device *bus) +{ + struct mei_cl_device *cldev, *n; + struct mei_me_client *me_cl; - cl->cldev = cldev; + down_read(&bus->me_clients_rwsem); + list_for_each_entry(me_cl, &bus->me_clients, list) + mei_cl_dev_init(bus, me_cl); + up_read(&bus->me_clients_rwsem); - dev_dbg(&cldev->dev, "client %s registered\n", name); + mutex_lock(&bus->cl_bus_lock); + list_for_each_entry_safe(cldev, n, &bus->device_list, bus_list) { - return cldev; -} -EXPORT_SYMBOL_GPL(mei_cl_add_device); + if (!mei_me_cl_is_active(cldev->me_cl)) { + mei_cl_bus_remove_device(cldev); + continue; + } -void mei_cl_remove_device(struct mei_cl_device *cldev) -{ - device_unregister(&cldev->dev); + if (cldev->is_added) + continue; + + if (mei_cl_dev_setup(bus, cldev)) + mei_cl_bus_dev_add(cldev); + else { + list_del_init(&cldev->bus_list); + put_device(&cldev->dev); + } + } + mutex_unlock(&bus->cl_bus_lock); + + dev_dbg(bus->dev, "rescan end"); } -EXPORT_SYMBOL_GPL(mei_cl_remove_device); int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner) { @@ -773,6 +853,7 @@ void mei_cl_driver_unregister(struct mei_cl_driver *cldrv) } EXPORT_SYMBOL_GPL(mei_cl_driver_unregister); + int __init mei_cl_bus_init(void) { return bus_register(&mei_cl_bus_type); diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 1987a20..9dacea7 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -558,7 +558,6 @@ void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) INIT_LIST_HEAD(&cl->rd_completed); INIT_LIST_HEAD(&cl->rd_pending); INIT_LIST_HEAD(&cl->link); - INIT_LIST_HEAD(&cl->device_link); cl->writing_state = MEI_IDLE; cl->state = MEI_FILE_INITIALIZING; cl->dev = dev; @@ -690,16 +689,12 @@ void mei_host_client_init(struct work_struct *work) mei_wd_host_init(dev, me_cl); mei_me_cl_put(me_cl); - me_cl = mei_me_cl_by_uuid(dev, &mei_nfc_guid); - if (me_cl) - mei_nfc_host_init(dev, me_cl); - mei_me_cl_put(me_cl); - - dev->dev_state = MEI_DEV_ENABLED; dev->reset_count = 0; mutex_unlock(&dev->device_lock); + mei_cl_bus_rescan(dev); + pm_runtime_mark_last_busy(dev->dev); dev_dbg(dev->dev, "rpm: autosuspend\n"); pm_runtime_autosuspend(dev->dev); diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 15000e9..e374661 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -331,7 +331,7 @@ void mei_stop(struct mei_device *dev) mei_cancel_work(dev); - mei_nfc_host_exit(dev); + mei_cl_bus_remove_devices(dev); mutex_lock(&dev->device_lock); diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 7098dca..71c55f4 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -241,7 +241,6 @@ struct mei_cl_cb { * @rd_completed: completed read * * @cldev: device on the mei client bus - * @device_link: link to bus clients */ struct mei_cl { struct list_head link; @@ -260,9 +259,7 @@ struct mei_cl { struct list_head rd_pending; struct list_head rd_completed; - /* MEI CL bus data */ struct mei_cl_device *cldev; - struct list_head device_link; }; /** struct mei_hw_ops @@ -329,12 +326,7 @@ struct mei_hw_ops { }; /* MEI bus API*/ - -struct mei_cl_device *mei_cl_add_device(struct mei_device *bus, - struct mei_me_client *me_cl, - struct mei_cl *cl, - const char *name); -void mei_cl_remove_device(struct mei_cl_device *cldev); +void mei_cl_bus_rescan(struct mei_device *bus); void mei_cl_dev_fixup(struct mei_cl_device *dev); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking); @@ -343,7 +335,6 @@ void mei_cl_bus_rx_event(struct mei_cl *cl); void mei_cl_bus_remove_devices(struct mei_device *bus); int mei_cl_bus_init(void); void mei_cl_bus_exit(void); -struct mei_cl *mei_cl_bus_find_cl_by_uuid(struct mei_device *bus, uuid_le uuid); /** * enum mei_pg_event - power gating transition events -- cgit v1.1 From 70ef835c84b3b88e274a53bf80a70940ae178a91 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 23 Jul 2015 21:37:12 +0300 Subject: mei: support for dynamic clients HBM version 2.0 and above allows ME clients in the system to register/unregister after the system is fully initialized. Clients may be added or removed after enum_resp message was received 1. To preserve backward compatibility the driver can opt-in to receive client add messages by setting allow_add field in enum_req 2. A new client is added upon reception of MEI_HBM_ADD_CLIENT_REQ_CMD 3. A client is removed in a lazy manner when connection request respond with MEI_HBMS_CLIENT_NOT_FOUND status Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/debugfs.c | 2 + drivers/misc/mei/hbm.c | 92 +++++++++++++++++++++++++++++++++++++++++++++- drivers/misc/mei/hw.h | 50 ++++++++++++++++++++++++- drivers/misc/mei/mei_dev.h | 2 + 4 files changed, 144 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c index eb86834..a65a1e6 100644 --- a/drivers/misc/mei/debugfs.c +++ b/drivers/misc/mei/debugfs.c @@ -154,6 +154,8 @@ static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf, pos += scnprintf(buf + pos, bufsz - pos, "hbm features:\n"); pos += scnprintf(buf + pos, bufsz - pos, "\tPG: %01d\n", dev->hbm_f_pg_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tDC: %01d\n", + dev->hbm_f_dc_supported); } pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n", diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index a4f2831..d4dba63 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -299,6 +299,7 @@ static int mei_hbm_enum_clients_req(struct mei_device *dev) enum_req = (struct hbm_host_enum_request *)dev->wr_msg.data; memset(enum_req, 0, len); enum_req->hbm_cmd = HOST_ENUM_REQ_CMD; + enum_req->allow_add = dev->hbm_f_dc_supported; ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); if (ret) { @@ -344,6 +345,64 @@ static int mei_hbm_me_cl_add(struct mei_device *dev, } /** + * mei_hbm_add_cl_resp - send response to fw on client add request + * + * @dev: the device structure + * @addr: me address + * @status: response status + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_add_cl_resp(struct mei_device *dev, u8 addr, u8 status) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + struct hbm_add_client_response *resp; + const size_t len = sizeof(struct hbm_add_client_response); + int ret; + + dev_dbg(dev->dev, "adding client response\n"); + + resp = (struct hbm_add_client_response *)dev->wr_msg.data; + + mei_hbm_hdr(mei_hdr, len); + memset(resp, 0, sizeof(struct hbm_add_client_response)); + + resp->hbm_cmd = MEI_HBM_ADD_CLIENT_RES_CMD; + resp->me_addr = addr; + resp->status = status; + + ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); + if (ret) + dev_err(dev->dev, "add client response write failed: ret = %d\n", + ret); + return ret; +} + +/** + * mei_hbm_fw_add_cl_req - request from the fw to add a client + * + * @dev: the device structure + * @req: add client request + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_fw_add_cl_req(struct mei_device *dev, + struct hbm_add_client_request *req) +{ + int ret; + u8 status = MEI_HBMS_SUCCESS; + + BUILD_BUG_ON(sizeof(struct hbm_add_client_request) != + sizeof(struct hbm_props_response)); + + ret = mei_hbm_me_cl_add(dev, (struct hbm_props_response *)req); + if (ret) + status = !MEI_HBMS_SUCCESS; + + return mei_hbm_add_cl_resp(dev, req->me_addr, status); +} + +/** * mei_hbm_prop_req - request property for a single client * * @dev: the device structure @@ -610,8 +669,11 @@ static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl, if (rs->status == MEI_CL_CONN_SUCCESS) cl->state = MEI_FILE_CONNECTED; - else + else { cl->state = MEI_FILE_DISCONNECT_REPLY; + if (rs->status == MEI_CL_CONN_NOT_FOUND) + mei_me_cl_del(dev, cl->me_cl); + } cl->status = mei_cl_conn_status_to_errno(rs->status); } @@ -709,6 +771,9 @@ static void mei_hbm_config_features(struct mei_device *dev) if (dev->version.major_version == HBM_MAJOR_VERSION_PGI && dev->version.minor_version >= HBM_MINOR_VERSION_PGI) dev->hbm_f_pg_supported = 1; + + if (dev->version.major_version >= HBM_MAJOR_VERSION_DC) + dev->hbm_f_dc_supported = 1; } /** @@ -740,6 +805,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) struct hbm_host_version_response *version_res; struct hbm_props_response *props_res; struct hbm_host_enum_response *enum_res; + struct hbm_add_client_request *add_cl_req; + int ret; struct mei_hbm_cl_cmd *cl_cmd; struct hbm_client_connect_request *disconnect_req; @@ -937,6 +1004,29 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) return -EIO; } break; + + case MEI_HBM_ADD_CLIENT_REQ_CMD: + dev_dbg(dev->dev, "hbm: add client request received\n"); + /* + * after the host receives the enum_resp + * message clients may be added or removed + */ + if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS && + dev->hbm_state >= MEI_HBM_STOPPED) { + dev_err(dev->dev, "hbm: add client: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + add_cl_req = (struct hbm_add_client_request *)mei_msg; + ret = mei_hbm_fw_add_cl_req(dev, add_cl_req); + if (ret) { + dev_err(dev->dev, "hbm: add client: failed to send response %d\n", + ret); + return -EIO; + } + dev_dbg(dev->dev, "hbm: add client request processed\n"); + break; + default: BUG(); break; diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 16fef6d..815f40a 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -46,6 +46,12 @@ #define HBM_MINOR_VERSION_PGI 1 #define HBM_MAJOR_VERSION_PGI 1 +/* + * MEI version with Dynamic clients support + */ +#define HBM_MINOR_VERSION_DC 0 +#define HBM_MAJOR_VERSION_DC 2 + /* Host bus message command opcode */ #define MEI_HBM_CMD_OP_MSK 0x7f /* Host bus message command RESPONSE */ @@ -81,6 +87,8 @@ #define MEI_PG_ISOLATION_EXIT_REQ_CMD 0x0b #define MEI_PG_ISOLATION_EXIT_RES_CMD 0x8b +#define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f +#define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f /* * MEI Stop Reason * used by hbm_host_stop_request.reason @@ -213,9 +221,17 @@ struct hbm_me_stop_request { u8 reserved[2]; } __packed; +/** + * struct hbm_host_enum_request - enumeration request from host to fw + * + * @hbm_cmd: bus message command header + * @allow_add: allow dynamic clients add HBM version >= 2.0 + * @reserved: reserved + */ struct hbm_host_enum_request { u8 hbm_cmd; - u8 reserved[3]; + u8 allow_add; + u8 reserved[2]; } __packed; struct hbm_host_enum_response { @@ -248,6 +264,38 @@ struct hbm_props_response { } __packed; /** + * struct hbm_add_client_request - request to add a client + * might be sent by fw after enumeration has already completed + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @reserved: reserved + * @client_properties: client properties + */ +struct hbm_add_client_request { + u8 hbm_cmd; + u8 me_addr; + u8 reserved[2]; + struct mei_client_properties client_properties; +} __packed; + +/** + * struct hbm_add_client_response - response to add a client + * sent by the host to report client addition status to fw + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @status: if HBMS_SUCCESS then the client can now accept connections. + * @reserved: reserved + */ +struct hbm_add_client_response { + u8 hbm_cmd; + u8 me_addr; + u8 status; + u8 reserved[1]; +} __packed; + +/** * struct hbm_power_gate - power gate request/response * * @hbm_cmd: bus message command header diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 71c55f4..33823f4 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -408,6 +408,7 @@ const char *mei_pg_state_str(enum mei_pg_state state); * * @version : HBM protocol version in use * @hbm_f_pg_supported : hbm feature pgi protocol + * @hbm_f_dc_supported : hbm feature dynamic clients * * @me_clients_rwsem: rw lock over me_clients list * @me_clients : list of FW clients @@ -501,6 +502,7 @@ struct mei_device { struct hbm_version version; unsigned int hbm_f_pg_supported:1; + unsigned int hbm_f_dc_supported:1; struct rw_semaphore me_clients_rwsem; struct list_head me_clients; -- cgit v1.1 From 18901357e70ae29e3fd1c58712a6847c2ae52eae Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Thu, 23 Jul 2015 21:37:13 +0300 Subject: mei: disconnect on connection request timeout For the FW with HBM version >= 2.0 we don't need to reset the whole device in case of a particular client failing to connect, it is enough to send disconnect a request to bring the device to the stable state. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 85 ++++++++++++++++++++++++++++++-------------- drivers/misc/mei/debugfs.c | 2 ++ drivers/misc/mei/hbm.c | 4 +++ drivers/misc/mei/hw.h | 6 ++++ drivers/misc/mei/interrupt.c | 20 ++++++++++- drivers/misc/mei/mei_dev.h | 7 ++-- 6 files changed, 95 insertions(+), 29 deletions(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 9dacea7..40285e0 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -836,44 +836,24 @@ int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb, return ret; } - - /** - * mei_cl_disconnect - disconnect host client from the me one + * __mei_cl_disconnect - disconnect host client from the me one + * internal function runtime pm has to be already acquired * * @cl: host client * - * Locking: called under "dev->device_lock" lock - * * Return: 0 on success, <0 on failure. */ -int mei_cl_disconnect(struct mei_cl *cl) +static int __mei_cl_disconnect(struct mei_cl *cl) { struct mei_device *dev; struct mei_cl_cb *cb; int rets; - if (WARN_ON(!cl || !cl->dev)) - return -ENODEV; - dev = cl->dev; - cl_dbg(dev, cl, "disconnecting"); - - if (!mei_cl_is_connected(cl)) - return 0; - - if (mei_cl_is_fixed_address(cl)) { - mei_cl_set_disconnected(cl); - return 0; - } - - rets = pm_runtime_get(dev->dev); - if (rets < 0 && rets != -EINPROGRESS) { - pm_runtime_put_noidle(dev->dev); - cl_err(dev, cl, "rpm: get failed %d\n", rets); - return rets; - } + if (WARN_ON(!pm_runtime_active(dev->dev))) + return -EFAULT; cl->state = MEI_FILE_DISCONNECTING; @@ -910,11 +890,52 @@ out: if (!rets) cl_dbg(dev, cl, "successfully disconnected from FW client.\n"); + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_disconnect - disconnect host client from the me one + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on success, <0 on failure. + */ +int mei_cl_disconnect(struct mei_cl *cl) +{ + struct mei_device *dev; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + cl_dbg(dev, cl, "disconnecting"); + + if (!mei_cl_is_connected(cl)) + return 0; + + if (mei_cl_is_fixed_address(cl)) { + mei_cl_set_disconnected(cl); + return 0; + } + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + rets = __mei_cl_disconnect(cl); + cl_dbg(dev, cl, "rpm: autosuspend\n"); pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); - mei_io_cb_free(cb); return rets; } @@ -1059,11 +1080,23 @@ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, mutex_unlock(&dev->device_lock); wait_event_timeout(cl->wait, (cl->state == MEI_FILE_CONNECTED || + cl->state == MEI_FILE_DISCONNECT_REQUIRED || cl->state == MEI_FILE_DISCONNECT_REPLY), mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); mutex_lock(&dev->device_lock); if (!mei_cl_is_connected(cl)) { + if (cl->state == MEI_FILE_DISCONNECT_REQUIRED) { + mei_io_list_flush(&dev->ctrl_rd_list, cl); + mei_io_list_flush(&dev->ctrl_wr_list, cl); + /* ignore disconnect return valuue; + * in case of failure reset will be invoked + */ + __mei_cl_disconnect(cl); + rets = -EFAULT; + goto out; + } + /* timeout or something went really wrong */ if (!cl->status) cl->status = -EFAULT; diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c index a65a1e6..e39cfe6 100644 --- a/drivers/misc/mei/debugfs.c +++ b/drivers/misc/mei/debugfs.c @@ -156,6 +156,8 @@ static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf, dev->hbm_f_pg_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tDC: %01d\n", dev->hbm_f_dc_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tDOT: %01d\n", + dev->hbm_f_dot_supported); } pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n", diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index d4dba63..07a8ea8 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -774,6 +774,10 @@ static void mei_hbm_config_features(struct mei_device *dev) if (dev->version.major_version >= HBM_MAJOR_VERSION_DC) dev->hbm_f_dc_supported = 1; + + /* disconnect on connect timeout instead of link reset */ + if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT) + dev->hbm_f_dot_supported = 1; } /** diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 815f40a..e961be3 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -52,6 +52,12 @@ #define HBM_MINOR_VERSION_DC 0 #define HBM_MAJOR_VERSION_DC 2 +/* + * MEI version with disconnect on connection timeout support + */ +#define HBM_MINOR_VERSION_DOT 0 +#define HBM_MAJOR_VERSION_DOT 2 + /* Host bus message command opcode */ #define MEI_HBM_CMD_OP_MSK 0x7f /* Host bus message command RESPONSE */ diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 3f34052..89d8e13 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -424,6 +424,24 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list) EXPORT_SYMBOL_GPL(mei_irq_write_handler); +/** + * mei_connect_timeout - connect/disconnect timeouts + * + * @cl: host client + */ +static void mei_connect_timeout(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + if (cl->state == MEI_FILE_CONNECTING) { + if (dev->hbm_f_dot_supported) { + cl->state = MEI_FILE_DISCONNECT_REQUIRED; + wake_up(&cl->wait); + return; + } + } + mei_reset(dev); +} /** * mei_timer - timer function. @@ -464,7 +482,7 @@ void mei_timer(struct work_struct *work) if (cl->timer_count) { if (--cl->timer_count == 0) { dev_err(dev->dev, "timer: connect/disconnect timeout.\n"); - mei_reset(dev); + mei_connect_timeout(cl); goto out; } } diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 33823f4..8bd46cd 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -89,6 +89,7 @@ enum file_state { MEI_FILE_CONNECTED, MEI_FILE_DISCONNECTING, MEI_FILE_DISCONNECT_REPLY, + MEI_FILE_DISCONNECT_REQUIRED, MEI_FILE_DISCONNECTED, }; @@ -407,8 +408,9 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @wr_msg : the buffer for hbm control messages * * @version : HBM protocol version in use - * @hbm_f_pg_supported : hbm feature pgi protocol - * @hbm_f_dc_supported : hbm feature dynamic clients + * @hbm_f_pg_supported : hbm feature pgi protocol + * @hbm_f_dc_supported : hbm feature dynamic clients + * @hbm_f_dot_supported : hbm feature disconnect on timeout * * @me_clients_rwsem: rw lock over me_clients list * @me_clients : list of FW clients @@ -503,6 +505,7 @@ struct mei_device { struct hbm_version version; unsigned int hbm_f_pg_supported:1; unsigned int hbm_f_dc_supported:1; + unsigned int hbm_f_dot_supported:1; struct rw_semaphore me_clients_rwsem; struct list_head me_clients; -- cgit v1.1 From d3c1c809c476ba248175a89156f7d625caf5f9a6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:15 +0300 Subject: mei: define async notification hbm commands FW has gained new capability where a FW client can asynchronously notify the host that an event has occurred in its process. The notification doesn't provide any data and host may need to query further the FW client in order to get details of the event. Host can subscribe or unsubscribe to the event notification via designated HBM commands, and also the notification is carried on a new HBM command. This patch adds definitions of asynchronous notification HBM commands. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index e961be3..a2c7aab 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -95,6 +95,11 @@ #define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f #define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f + +#define MEI_HBM_NOTIFY_REQ_CMD 0x10 +#define MEI_HBM_NOTIFY_RES_CMD 0x90 +#define MEI_HBM_NOTIFICATION_CMD 0x11 + /* * MEI Stop Reason * used by hbm_host_stop_request.reason @@ -352,5 +357,62 @@ struct hbm_flow_control { u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH]; } __packed; +#define MEI_HBM_NOTIFICATION_START 1 +#define MEI_HBM_NOTIFICATION_STOP 0 +/** + * struct hbm_notification_request - start/stop notification request + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @start: start = 1 or stop = 0 asynchronous notifications + */ +struct hbm_notification_request { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 start; +} __packed; + +/** + * struct hbm_notification_response - start/stop notification response + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: - address of the client in the driver + * @status: (mei_hbm_status) response status for the request + * - MEI_HBMS_SUCCESS: successful stop/start + * - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found. + * - MEI_HBMS_ALREADY_STARTED: for start requests for a previously + * started notification. + * - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom + * asynchronous notifications are currently disabled. + * + * @start: start = 1 or stop = 0 asynchronous notifications + * @reserved: reserved + */ +struct hbm_notification_response { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 status; + u8 start; + u8 reserved[3]; +} __packed; + +/** + * struct hbm_notification - notification event + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @reserved: reserved for alignment + */ +struct hbm_notification { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 reserved[1]; +} __packed; #endif -- cgit v1.1 From 965ae37ab86eb8cd327c5752dc9e2190d33db25c Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:16 +0300 Subject: mei: implement async notification hbm messages Implement sending and reception handlers for the async event notification hbm commands. Add client notification book keeping data required for the messages notify_en to indicate whether notification is enabled notify_ev to indicate whether an event is pending Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 135 +++++++++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/hbm.h | 2 + drivers/misc/mei/mei_dev.h | 8 +++ 3 files changed, 145 insertions(+) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 07a8ea8..8a73fa0 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -403,6 +403,125 @@ static int mei_hbm_fw_add_cl_req(struct mei_device *dev, } /** + * mei_hbm_cl_notify_req - send notification request + * + * @dev: the device structure + * @cl: a client to disconnect from + * @start: true for start false for stop + * + * Return: 0 on success and -EIO on write failure + */ +int mei_hbm_cl_notify_req(struct mei_device *dev, + struct mei_cl *cl, u8 start) +{ + + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + struct hbm_notification_request *req; + const size_t len = sizeof(struct hbm_notification_request); + int ret; + + mei_hbm_hdr(mei_hdr, len); + mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, dev->wr_msg.data, len); + + req = (struct hbm_notification_request *)dev->wr_msg.data; + req->start = start; + + ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); + if (ret) + dev_err(dev->dev, "notify request failed: ret = %d\n", ret); + + return ret; +} + +/** + * notify_res_to_fop - convert notification response to the proper + * notification FOP + * + * @cmd: client notification start response command + * + * Return: MEI_FOP_NOTIFY_START or MEI_FOP_NOTIFY_STOP; + */ +static inline enum mei_cb_file_ops notify_res_to_fop(struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + if (rs->start == MEI_HBM_NOTIFICATION_START) + return MEI_FOP_NOTIFY_START; + else + return MEI_FOP_NOTIFY_STOP; +} + +/** + * mei_hbm_cl_notify_start_res - update the client state according + * notify start response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: client notification start response command + */ +static void mei_hbm_cl_notify_start_res(struct mei_device *dev, + struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + cl_dbg(dev, cl, "hbm: notify start response status=%d\n", rs->status); + + if (rs->status == MEI_HBMS_SUCCESS || + rs->status == MEI_HBMS_ALREADY_STARTED) { + cl->notify_en = true; + cl->status = 0; + } else { + cl->status = -EINVAL; + } +} + +/** + * mei_hbm_cl_notify_stop_res - update the client state according + * notify stop response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: client notification stop response command + */ +static void mei_hbm_cl_notify_stop_res(struct mei_device *dev, + struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + cl_dbg(dev, cl, "hbm: notify stop response status=%d\n", rs->status); + + if (rs->status == MEI_HBMS_SUCCESS || + rs->status == MEI_HBMS_NOT_STARTED) { + cl->notify_en = false; + cl->status = 0; + } else { + /* TODO: spec is not clear yet about other possible issues */ + cl->status = -EINVAL; + } +} + +/** + * mei_hbm_cl_notify - signal notification event + * + * @dev: the device structure + * @cmd: notification client message + */ +static void mei_hbm_cl_notify(struct mei_device *dev, + struct mei_hbm_cl_cmd *cmd) +{ + struct mei_cl *cl; + + cl = mei_hbm_cl_find_by_cmd(dev, cmd); + if (cl && cl->notify_en) + cl->notify_ev = true; +} + +/** * mei_hbm_prop_req - request property for a single client * * @dev: the device structure @@ -716,6 +835,12 @@ static void mei_hbm_cl_res(struct mei_device *dev, case MEI_FOP_DISCONNECT: mei_hbm_cl_disconnect_res(dev, cl, rs); break; + case MEI_FOP_NOTIFY_START: + mei_hbm_cl_notify_start_res(dev, cl, rs); + break; + case MEI_FOP_NOTIFY_STOP: + mei_hbm_cl_notify_stop_res(dev, cl, rs); + break; default: return; } @@ -1031,6 +1156,16 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) dev_dbg(dev->dev, "hbm: add client request processed\n"); break; + case MEI_HBM_NOTIFY_RES_CMD: + dev_dbg(dev->dev, "hbm: notify response received\n"); + mei_hbm_cl_res(dev, cl_cmd, notify_res_to_fop(cl_cmd)); + break; + + case MEI_HBM_NOTIFICATION_CMD: + dev_dbg(dev->dev, "hbm: notification\n"); + mei_hbm_cl_notify(dev, cl_cmd); + break; + default: BUG(); break; diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h index 2544db7..42d66d8 100644 --- a/drivers/misc/mei/hbm.h +++ b/drivers/misc/mei/hbm.h @@ -54,6 +54,8 @@ int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl); int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl); bool mei_hbm_version_is_supported(struct mei_device *dev); int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd); +int mei_hbm_cl_notify_req(struct mei_device *dev, + struct mei_cl *cl, u8 request); #endif /* _MEI_HBM_H_ */ diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 8bd46cd..362ebb1 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -136,6 +136,8 @@ enum mei_wd_states { * @MEI_FOP_CONNECT: connect * @MEI_FOP_DISCONNECT: disconnect * @MEI_FOP_DISCONNECT_RSP: disconnect response + * @MEI_FOP_NOTIFY_START: start notification + * @MEI_FOP_NOTIFY_STOP: stop notification */ enum mei_cb_file_ops { MEI_FOP_READ = 0, @@ -143,6 +145,8 @@ enum mei_cb_file_ops { MEI_FOP_CONNECT, MEI_FOP_DISCONNECT, MEI_FOP_DISCONNECT_RSP, + MEI_FOP_NOTIFY_START, + MEI_FOP_NOTIFY_STOP, }; /* @@ -237,6 +241,8 @@ struct mei_cl_cb { * @mei_flow_ctrl_creds: transmit flow credentials * @timer_count: watchdog timer for operation completion * @reserved: reserved for alignment + * @notify_en: notification - enabled/disabled + * @notify_ev: pending notification event * @writing_state: state of the tx * @rd_pending: pending read credits * @rd_completed: completed read @@ -256,6 +262,8 @@ struct mei_cl { u8 mei_flow_ctrl_creds; u8 timer_count; u8 reserved; + u8 notify_en; + u8 notify_ev; enum mei_file_transaction_states writing_state; struct list_head rd_pending; struct list_head rd_completed; -- cgit v1.1 From 4d99877d871da0bbb924b2d7aa4ccb27e1ffa93a Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:17 +0300 Subject: mei: enable async event notifications only from hbm version 2.0 Only FW version 2.0 and newer support the async event notification. For backward compatibility block the feature if the FW version is older then 2.0 Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/debugfs.c | 2 ++ drivers/misc/mei/hbm.c | 4 ++++ drivers/misc/mei/hw.h | 6 ++++++ drivers/misc/mei/mei_dev.h | 2 ++ 4 files changed, 14 insertions(+) diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c index e39cfe6..4b469cf 100644 --- a/drivers/misc/mei/debugfs.c +++ b/drivers/misc/mei/debugfs.c @@ -158,6 +158,8 @@ static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf, dev->hbm_f_dc_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tDOT: %01d\n", dev->hbm_f_dot_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tEV: %01d\n", + dev->hbm_f_ev_supported); } pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n", diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 8a73fa0..95e918c 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -903,6 +903,10 @@ static void mei_hbm_config_features(struct mei_device *dev) /* disconnect on connect timeout instead of link reset */ if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT) dev->hbm_f_dot_supported = 1; + + /* Notification Event Support */ + if (dev->version.major_version >= HBM_MAJOR_VERSION_EV) + dev->hbm_f_ev_supported = 1; } /** diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index a2c7aab..3f8901a 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -58,6 +58,12 @@ #define HBM_MINOR_VERSION_DOT 0 #define HBM_MAJOR_VERSION_DOT 2 +/* + * MEI version with notifcation support + */ +#define HBM_MINOR_VERSION_EV 0 +#define HBM_MAJOR_VERSION_EV 2 + /* Host bus message command opcode */ #define MEI_HBM_CMD_OP_MSK 0x7f /* Host bus message command RESPONSE */ diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 362ebb1..e22bd21 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -419,6 +419,7 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @hbm_f_pg_supported : hbm feature pgi protocol * @hbm_f_dc_supported : hbm feature dynamic clients * @hbm_f_dot_supported : hbm feature disconnect on timeout + * @hbm_f_ev_supported : hbm feature event notification * * @me_clients_rwsem: rw lock over me_clients list * @me_clients : list of FW clients @@ -514,6 +515,7 @@ struct mei_device { unsigned int hbm_f_pg_supported:1; unsigned int hbm_f_dc_supported:1; unsigned int hbm_f_dot_supported:1; + unsigned int hbm_f_ev_supported:1; struct rw_semaphore me_clients_rwsem; struct list_head me_clients; -- cgit v1.1 From 51678ccb7b12dd428a84d466ff379a5e2d717f1f Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:18 +0300 Subject: mei: add mei_cl_notify_request command Add per client notification request infrastructure that allows client to enable or disable async event notification. Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 143 +++++++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/client.h | 6 ++ drivers/misc/mei/hbm.c | 5 +- drivers/misc/mei/interrupt.c | 7 +++ 4 files changed, 157 insertions(+), 4 deletions(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 40285e0..fae40504 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -1209,6 +1209,147 @@ int mei_cl_flow_ctrl_reduce(struct mei_cl *cl) } /** + * mei_cl_notify_fop2req - convert fop to proper request + * + * @fop: client notification start response command + * + * Return: MEI_HBM_NOTIFICATION_START/STOP + */ +u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop) +{ + if (fop == MEI_FOP_NOTIFY_START) + return MEI_HBM_NOTIFICATION_START; + else + return MEI_HBM_NOTIFICATION_STOP; +} + +/** + * mei_cl_notify_req2fop - convert notification request top file operation type + * + * @req: hbm notification request type + * + * Return: MEI_FOP_NOTIFY_START/STOP + */ +enum mei_cb_file_ops mei_cl_notify_req2fop(u8 req) +{ + if (req == MEI_HBM_NOTIFICATION_START) + return MEI_FOP_NOTIFY_START; + else + return MEI_FOP_NOTIFY_STOP; +} + +/** + * mei_cl_irq_notify - send notification request in irq_thread context + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, + struct mei_cl_cb *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + bool request; + + msg_slots = mei_data2slots(sizeof(struct hbm_client_connect_request)); + slots = mei_hbuf_empty_slots(dev); + + if (slots < msg_slots) + return -EMSGSIZE; + + request = mei_cl_notify_fop2req(cb->fop_type); + ret = mei_hbm_cl_notify_req(dev, cl, request); + if (ret) { + cl->status = ret; + list_move_tail(&cb->list, &cmpl_list->list); + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list.list); + return 0; +} + +/** + * mei_cl_notify_request - send notification stop/start request + * + * @cl: host client + * @file: associate request with file + * @request: 1 for start or 0 for stop + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + enum mei_cb_file_ops fop_type; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!dev->hbm_f_ev_supported) { + cl_dbg(dev, cl, "notifications not supported\n"); + return -EOPNOTSUPP; + } + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + fop_type = mei_cl_notify_req2fop(request); + cb = mei_io_cb_init(cl, fop_type, file); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + if (mei_hbuf_acquire(dev)) { + if (mei_hbm_cl_notify_req(dev, cl, request)) { + rets = -ENODEV; + goto out; + } + list_add_tail(&cb->list, &dev->ctrl_rd_list.list); + } else { + list_add_tail(&cb->list, &dev->ctrl_wr_list.list); + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, cl->notify_en == request, + mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); + mutex_lock(&dev->device_lock); + + if (cl->notify_en != request) { + mei_io_list_flush(&dev->ctrl_rd_list, cl); + mei_io_list_flush(&dev->ctrl_wr_list, cl); + if (!cl->status) + cl->status = -EFAULT; + } + + rets = cl->status; + +out: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + mei_io_cb_free(cb); + return rets; +} + +/** * mei_cl_read_start - the start read client message function. * * @cl: host client @@ -1516,6 +1657,8 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb) case MEI_FOP_CONNECT: case MEI_FOP_DISCONNECT: + case MEI_FOP_NOTIFY_STOP: + case MEI_FOP_NOTIFY_START: if (waitqueue_active(&cl->wait)) wake_up(&cl->wait); diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 8d7f057..506b7d4 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -219,6 +219,12 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb); void mei_host_client_init(struct work_struct *work); +u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop); +enum mei_cb_file_ops mei_cl_notify_req2fop(u8 request); +int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request); +int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, + struct mei_cl_cb *cmpl_list); + void mei_cl_all_disconnect(struct mei_device *dev); void mei_cl_all_wakeup(struct mei_device *dev); void mei_cl_all_write_clear(struct mei_device *dev); diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 95e918c..12229ff 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -446,10 +446,7 @@ static inline enum mei_cb_file_ops notify_res_to_fop(struct mei_hbm_cl_cmd *cmd) struct hbm_notification_response *rs = (struct hbm_notification_response *)cmd; - if (rs->start == MEI_HBM_NOTIFICATION_START) - return MEI_FOP_NOTIFY_START; - else - return MEI_FOP_NOTIFY_STOP; + return mei_cl_notify_req2fop(rs->start); } /** diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 89d8e13..c418d78 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -403,6 +403,13 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list) if (ret) return ret; break; + + case MEI_FOP_NOTIFY_START: + case MEI_FOP_NOTIFY_STOP: + ret = mei_cl_irq_notify(cl, cb, cmpl_list); + if (ret) + return ret; + break; default: BUG(); } -- cgit v1.1 From b38a362fad6686dd580a50590053a76ded601a0b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:19 +0300 Subject: mei: add a handler that waits for notification on event mei_cl_notify_get is to be called by a host client to wait, receive, and ack the event notification. Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/client.h | 1 + drivers/misc/mei/hbm.c | 4 +++- drivers/misc/mei/mei_dev.h | 2 ++ 4 files changed, 58 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index fae40504..d939683 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -555,6 +555,7 @@ void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) init_waitqueue_head(&cl->wait); init_waitqueue_head(&cl->rx_wait); init_waitqueue_head(&cl->tx_wait); + init_waitqueue_head(&cl->ev_wait); INIT_LIST_HEAD(&cl->rd_completed); INIT_LIST_HEAD(&cl->rd_pending); INIT_LIST_HEAD(&cl->link); @@ -1350,6 +1351,51 @@ out: } /** + * mei_cl_notify_get - get or wait for notification event + * + * @cl: host client + * @block: this request is blocking + * @notify_ev: true if notification event was received + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev) +{ + struct mei_device *dev; + int rets; + + *notify_ev = false; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!mei_cl_is_connected(cl)) + return -ENODEV; + + if (cl->notify_ev) + goto out; + + if (!block) + return -EAGAIN; + + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible(cl->ev_wait, cl->notify_ev); + mutex_lock(&dev->device_lock); + + if (rets < 0) + return rets; + +out: + *notify_ev = cl->notify_ev; + cl->notify_ev = false; + return 0; +} + +/** * mei_cl_read_start - the start read client message function. * * @cl: host client @@ -1701,6 +1747,12 @@ void mei_cl_all_wakeup(struct mei_device *dev) cl_dbg(dev, cl, "Waking up writing client!\n"); wake_up_interruptible(&cl->tx_wait); } + + /* synchronized under device mutex */ + if (waitqueue_active(&cl->ev_wait)) { + cl_dbg(dev, cl, "Waking up waiting for event clients!\n"); + wake_up_interruptible(&cl->ev_wait); + } } } diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 506b7d4..58a4b49 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -224,6 +224,7 @@ enum mei_cb_file_ops mei_cl_notify_req2fop(u8 request); int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request); int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); +int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev); void mei_cl_all_disconnect(struct mei_device *dev); void mei_cl_all_wakeup(struct mei_device *dev); diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 12229ff..70c94a9 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -514,8 +514,10 @@ static void mei_hbm_cl_notify(struct mei_device *dev, struct mei_cl *cl; cl = mei_hbm_cl_find_by_cmd(dev, cmd); - if (cl && cl->notify_en) + if (cl && cl->notify_en) { cl->notify_ev = true; + wake_up_interruptible(&cl->ev_wait); + } } /** diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index e22bd21..6f8f5e1 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -235,6 +235,7 @@ struct mei_cl_cb { * @tx_wait: wait queue for tx completion * @rx_wait: wait queue for rx completion * @wait: wait queue for management operation + * @ev_wait: notification wait queue * @status: connection status * @me_cl: fw client connected * @host_client_id: host id @@ -256,6 +257,7 @@ struct mei_cl { wait_queue_head_t tx_wait; wait_queue_head_t rx_wait; wait_queue_head_t wait; + wait_queue_head_t ev_wait; int status; struct mei_me_client *me_cl; u8 host_client_id; -- cgit v1.1 From 3c7c8468e5d993dfe377a67e41cbb23cda93af9e Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:20 +0300 Subject: mei: add async event notification ioctls Add ioctl IOCTL_MEI_NOTIFY_SET for enabling and disabling async event notification. Add ioctl IOCTL_MEI_NOTIFY_GET for receiving and acking an event notification. Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- Documentation/ioctl/ioctl-number.txt | 2 + Documentation/misc-devices/mei/mei.txt | 45 ++++++++++++++++++++++- drivers/misc/mei/main.c | 67 ++++++++++++++++++++++++++++++++++ include/uapi/linux/mei.h | 19 ++++++++++ 4 files changed, 132 insertions(+), 1 deletion(-) diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 611c522..141f847 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -124,6 +124,8 @@ Code Seq#(hex) Include File Comments 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! +'H' 02 linux/mei.h conflict! +'H' 03 linux/mei.h conflict! 'H' 00-0F sound/asound.h conflict! 'H' 20-40 sound/asound_fm.h conflict! 'H' 80-8F sound/sfnt_info.h conflict! diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt index 8d47501..91c1fa3 100644 --- a/Documentation/misc-devices/mei/mei.txt +++ b/Documentation/misc-devices/mei/mei.txt @@ -96,7 +96,7 @@ A code snippet for an application communicating with Intel AMTHI client: IOCTL ===== -The Intel MEI Driver supports the following IOCTL command: +The Intel MEI Driver supports the following IOCTL commands: IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client). usage: @@ -125,6 +125,49 @@ The Intel MEI Driver supports the following IOCTL command: data that can be sent or received. (e.g. if MTU=2K, can send requests up to bytes 2k and received responses up to 2k bytes). + IOCTL_MEI_NOTIFY_SET: enable or disable event notifications + + Usage: + uint32_t enable; + ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable); + + Inputs: + uint32_t enable = 1; + or + uint32_t enable[disable] = 0; + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected in order to enable notification events + + + IOCTL_MEI_NOTIFY_GET : retrieve event + + Usage: + uint32_t event; + ioctl(fd, IOCTL_MEI_NOTIFY_GET, &event); + + Outputs: + 1 - if an event is pending + 0 - if there is no even pending + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected and event notification has to be enabled + in order to receive an event + Intel ME Applications ===================== diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index e9513d6..ffa7003 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -446,6 +446,45 @@ end: } /** + * mei_ioctl_client_notify_request - + * propagate event notification request to client + * + * @file: pointer to file structure + * @request: 0 - disable, 1 - enable + * + * Return: 0 on success , <0 on error + */ +static int mei_ioctl_client_notify_request(struct file *file, u32 request) +{ + struct mei_cl *cl = file->private_data; + + return mei_cl_notify_request(cl, file, request); +} + +/** + * mei_ioctl_client_notify_get - wait for notification request + * + * @file: pointer to file structure + * @notify_get: 0 - disable, 1 - enable + * + * Return: 0 on success , <0 on error + */ +static int mei_ioctl_client_notify_get(struct file *file, u32 *notify_get) +{ + struct mei_cl *cl = file->private_data; + bool notify_ev; + bool block = (file->f_flags & O_NONBLOCK) == 0; + int rets; + + rets = mei_cl_notify_get(cl, block, ¬ify_ev); + if (rets) + return rets; + + *notify_get = notify_ev ? 1 : 0; + return 0; +} + +/** * mei_ioctl - the IOCTL function * * @file: pointer to file structure @@ -459,6 +498,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data) struct mei_device *dev; struct mei_cl *cl = file->private_data; struct mei_connect_client_data connect_data; + u32 notify_get, notify_req; int rets; @@ -499,6 +539,33 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data) break; + case IOCTL_MEI_NOTIFY_SET: + dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_SET.\n"); + if (copy_from_user(¬ify_req, + (char __user *)data, sizeof(notify_req))) { + dev_dbg(dev->dev, "failed to copy data from userland\n"); + rets = -EFAULT; + goto out; + } + rets = mei_ioctl_client_notify_request(file, notify_req); + break; + + case IOCTL_MEI_NOTIFY_GET: + dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_GET.\n"); + rets = mei_ioctl_client_notify_get(file, ¬ify_get); + if (rets) + goto out; + + dev_dbg(dev->dev, "copy connect data to user\n"); + if (copy_to_user((char __user *)data, + ¬ify_get, sizeof(notify_get))) { + dev_dbg(dev->dev, "failed to copy data to userland\n"); + rets = -EFAULT; + goto out; + + } + break; + default: dev_err(dev->dev, ": unsupported ioctl %d.\n", cmd); rets = -ENOIOCTLCMD; diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index bc0d8b6..7c3b64f 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -107,4 +107,23 @@ struct mei_connect_client_data { }; }; +/** + * DOC: set and unset event notification for a connected client + * + * The IOCTL argument is 1 for enabling event notification and 0 for + * disabling the service + * Return: -EOPNOTSUPP if the devices doesn't support the feature + */ +#define IOCTL_MEI_NOTIFY_SET _IOW('H', 0x02, __u32) + +/** + * DOC: retrieve notification + * + * The IOCTL output argument is 1 if an event was is pending and 0 otherwise + * the ioctl has to be called in order to acknowledge pending event + * + * Return: -EOPNOTSUPP if the devices doesn't support the feature + */ +#define IOCTL_MEI_NOTIFY_GET _IOR('H', 0x03, __u32) + #endif /* _LINUX_MEI_H */ -- cgit v1.1 From 2c84c2970c1acf83827aa97ab0e6addc3d2aa960 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:21 +0300 Subject: mei: support polling for event notification Polling on priority events is translated on waiting for event notification. One need to enable notification prior for calling select or poll system call otherwise process will not wait. Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index ffa7003..17b356f 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -608,6 +608,7 @@ static unsigned int mei_poll(struct file *file, poll_table *wait) struct mei_cl *cl = file->private_data; struct mei_device *dev; unsigned int mask = 0; + bool notify_en; if (WARN_ON(!cl || !cl->dev)) return POLLERR; @@ -616,6 +617,7 @@ static unsigned int mei_poll(struct file *file, poll_table *wait) mutex_lock(&dev->device_lock); + notify_en = cl->notify_en && (req_events & POLLPRI); if (dev->dev_state != MEI_DEV_ENABLED || !mei_cl_is_connected(cl)) { @@ -628,6 +630,12 @@ static unsigned int mei_poll(struct file *file, poll_table *wait) goto out; } + if (notify_en) { + poll_wait(file, &cl->ev_wait, wait); + if (cl->notify_ev) + mask |= POLLPRI; + } + if (req_events & (POLLIN | POLLRDNORM)) { poll_wait(file, &cl->rx_wait, wait); -- cgit v1.1 From 237092bf034a648611f61eb1f0965e9ba1b08871 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 26 Jul 2015 09:54:22 +0300 Subject: mei: implement fasync for event notification A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 27 +++++++++++++++++++++++++++ drivers/misc/mei/client.h | 1 + drivers/misc/mei/hbm.c | 6 ++---- drivers/misc/mei/main.c | 21 +++++++++++++++++++++ drivers/misc/mei/mei_dev.h | 2 ++ 5 files changed, 53 insertions(+), 4 deletions(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index d939683..db2436a 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -1351,6 +1351,33 @@ out: } /** + * mei_cl_notify - raise notification + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + */ +void mei_cl_notify(struct mei_cl *cl) +{ + struct mei_device *dev; + + if (!cl || !cl->dev) + return; + + dev = cl->dev; + + if (!cl->notify_en) + return; + + cl_dbg(dev, cl, "notify event"); + cl->notify_ev = true; + wake_up_interruptible_all(&cl->ev_wait); + + if (cl->ev_async) + kill_fasync(&cl->ev_async, SIGIO, POLL_PRI); +} + +/** * mei_cl_notify_get - get or wait for notification event * * @cl: host client diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 58a4b49..1c7cad0 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -225,6 +225,7 @@ int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request); int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev); +void mei_cl_notify(struct mei_cl *cl); void mei_cl_all_disconnect(struct mei_device *dev); void mei_cl_all_wakeup(struct mei_device *dev); diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 70c94a9..7f53597 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -514,10 +514,8 @@ static void mei_hbm_cl_notify(struct mei_device *dev, struct mei_cl *cl; cl = mei_hbm_cl_find_by_cmd(dev, cmd); - if (cl && cl->notify_en) { - cl->notify_ev = true; - wake_up_interruptible(&cl->ev_wait); - } + if (cl) + mei_cl_notify(cl); } /** diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 17b356f..b2f2486 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -651,6 +651,26 @@ out: } /** + * mei_fasync - asynchronous io support + * + * @fd: file descriptor + * @file: pointer to file structure + * @band: band bitmap + * + * Return: poll mask + */ +static int mei_fasync(int fd, struct file *file, int band) +{ + + struct mei_cl *cl = file->private_data; + + if (!mei_cl_is_connected(cl)) + return POLLERR; + + return fasync_helper(fd, file, band, &cl->ev_async); +} + +/** * fw_status_show - mei device attribute show method * * @device: device pointer @@ -702,6 +722,7 @@ static const struct file_operations mei_fops = { .release = mei_release, .write = mei_write, .poll = mei_poll, + .fasync = mei_fasync, .llseek = no_llseek }; diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 6f8f5e1..c960aaa 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -236,6 +236,7 @@ struct mei_cl_cb { * @rx_wait: wait queue for rx completion * @wait: wait queue for management operation * @ev_wait: notification wait queue + * @ev_async: event async notification * @status: connection status * @me_cl: fw client connected * @host_client_id: host id @@ -258,6 +259,7 @@ struct mei_cl { wait_queue_head_t rx_wait; wait_queue_head_t wait; wait_queue_head_t ev_wait; + struct fasync_struct *ev_async; int status; struct mei_me_client *me_cl; u8 host_client_id; -- cgit v1.1 From bb2ef9c39db2e3c2562b4e439b2b00dc42e2c026 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 26 Jul 2015 09:54:23 +0300 Subject: mei: bus: add and call callback on notify event Enable drivers on mei client bus to subscribe to asynchronous event notifications. Introduce events_mask to the existing callback infrastructure so it is possible to handle both RX and event notification. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 50 ++++++++++++++++++++++++++++++++++++++++++---- drivers/misc/mei/client.c | 2 ++ drivers/misc/mei/mei_dev.h | 1 + drivers/nfc/mei_phy.c | 3 ++- include/linux/mei_cl_bus.h | 4 ++++ 5 files changed, 55 insertions(+), 5 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 3ab08e5..eef1c6b 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -222,7 +222,33 @@ static void mei_bus_event_work(struct work_struct *work) cldev->events = 0; /* Prepare for the next read */ - mei_cl_read_start(cldev->cl, 0, NULL); + if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) + mei_cl_read_start(cldev->cl, 0, NULL); +} + +/** + * mei_cl_bus_notify_event - schedule notify cb on bus client + * + * @cl: host client + */ +void mei_cl_bus_notify_event(struct mei_cl *cl) +{ + struct mei_cl_device *cldev = cl->cldev; + + if (!cldev || !cldev->event_cb) + return; + + if (!(cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF))) + return; + + if (!cl->notify_ev) + return; + + set_bit(MEI_CL_EVENT_NOTIF, &cldev->events); + + schedule_work(&cldev->event_work); + + cl->notify_ev = false; } /** @@ -237,6 +263,9 @@ void mei_cl_bus_rx_event(struct mei_cl *cl) if (!cldev || !cldev->event_cb) return; + if (!(cldev->events_mask & BIT(MEI_CL_EVENT_RX))) + return; + set_bit(MEI_CL_EVENT_RX, &cldev->events); schedule_work(&cldev->event_work); @@ -247,6 +276,7 @@ void mei_cl_bus_rx_event(struct mei_cl *cl) * * @cldev: me client devices * @event_cb: callback function + * @events_mask: requested events bitmask * @context: driver context data * * Return: 0 on success @@ -254,6 +284,7 @@ void mei_cl_bus_rx_event(struct mei_cl *cl) * <0 on other errors */ int mei_cl_register_event_cb(struct mei_cl_device *cldev, + unsigned long events_mask, mei_cl_event_cb_t event_cb, void *context) { int ret; @@ -262,13 +293,24 @@ int mei_cl_register_event_cb(struct mei_cl_device *cldev, return -EALREADY; cldev->events = 0; + cldev->events_mask = events_mask; cldev->event_cb = event_cb; cldev->event_context = context; INIT_WORK(&cldev->event_work, mei_bus_event_work); - ret = mei_cl_read_start(cldev->cl, 0, NULL); - if (ret && ret != -EBUSY) - return ret; + if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) { + ret = mei_cl_read_start(cldev->cl, 0, NULL); + if (ret && ret != -EBUSY) + return ret; + } + + if (cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)) { + mutex_lock(&cldev->cl->dev->device_lock); + ret = mei_cl_notify_request(cldev->cl, NULL, event_cb ? 1 : 0); + mutex_unlock(&cldev->cl->dev->device_lock); + if (ret) + return ret; + } return 0; } diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index db2436a..5fcd70b 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -1375,6 +1375,8 @@ void mei_cl_notify(struct mei_cl *cl) if (cl->ev_async) kill_fasync(&cl->ev_async, SIGIO, POLL_PRI); + + mei_cl_bus_notify_event(cl); } /** diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index c960aaa..e25ee16 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -345,6 +345,7 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking); ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length); void mei_cl_bus_rx_event(struct mei_cl *cl); +void mei_cl_bus_notify_event(struct mei_cl *cl); void mei_cl_bus_remove_devices(struct mei_device *bus); int mei_cl_bus_init(void); void mei_cl_bus_exit(void); diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index 2b77ccf..754a9bb 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -355,7 +355,8 @@ static int nfc_mei_phy_enable(void *phy_id) goto err; } - r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy); + r = mei_cl_register_event_cb(phy->device, BIT(MEI_CL_EVENT_RX), + nfc_mei_event_cb, phy); if (r) { pr_err("Event cb registration failed %d\n", r); goto err; diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 81ab56d..0962b2c 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -28,6 +28,7 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * @event_cb: Drivers register this callback to get asynchronous ME * events (e.g. Rx buffer pending) notifications. * @event_context: event callback run context + * @events_mask: Events bit mask requested by driver. * @events: Events bitmask sent to the driver. * * @do_match: wheather device can be matched with a driver @@ -46,6 +47,7 @@ struct mei_cl_device { struct work_struct event_work; mei_cl_event_cb_t event_cb; void *event_context; + unsigned long events_mask; unsigned long events; unsigned int do_match:1; @@ -76,10 +78,12 @@ ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length); ssize_t mei_cl_recv(struct mei_cl_device *device, u8 *buf, size_t length); int mei_cl_register_event_cb(struct mei_cl_device *device, + unsigned long event_mask, mei_cl_event_cb_t read_cb, void *context); #define MEI_CL_EVENT_RX 0 #define MEI_CL_EVENT_TX 1 +#define MEI_CL_EVENT_NOTIF 2 void *mei_cl_get_drvdata(const struct mei_cl_device *device); void mei_cl_set_drvdata(struct mei_cl_device *device, void *data); -- cgit v1.1 From 71e117f28a6782fa2d31cce63340a9f18417afa4 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Wed, 29 Jul 2015 14:59:33 +0300 Subject: mei: hbm: add new error code MEI_CL_CONN_NOT_ALLOWED The device can return error 5 (NOT_ALLOWED) on connection attempt. This error can happen if: 1. An another connection attempt is in progress 2. There is an attempt to connect a fixed (connectionless) client 3. The number of available connections is exceeded (new in HBM 2.0) We should not hit that error unless there is an internal book keeping hiccup except option (3), therefore we translate the error code to errno EBUSY; Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 2 ++ drivers/misc/mei/hw.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 7f53597..7646569 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -52,6 +52,7 @@ static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status) MEI_CL_CS(ALREADY_STARTED); MEI_CL_CS(OUT_OF_RESOURCES); MEI_CL_CS(MESSAGE_SMALL); + MEI_CL_CS(NOT_ALLOWED); default: return "unknown"; } #undef MEI_CL_CCS @@ -89,6 +90,7 @@ static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status) case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY; case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY; case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL; + case MEI_CL_CONN_NOT_ALLOWED: return -EBUSY; default: return -EINVAL; } } diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 3f8901a..c262d0bd 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -161,6 +161,7 @@ enum mei_cl_connect_status { MEI_CL_CONN_ALREADY_STARTED = MEI_HBMS_ALREADY_EXISTS, MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED, MEI_CL_CONN_MESSAGE_SMALL = MEI_HBMS_INVALID_PARAMETER, + MEI_CL_CONN_NOT_ALLOWED = MEI_HBMS_NOT_ALLOWED, }; /* -- cgit v1.1 From 11830486c5717c713bb363b14944cda39e3034f9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 2 Aug 2015 22:20:50 +0300 Subject: mei: me: d0i3: add the control registers Starting with Intel Sunrisepoint (Skylake PCH) the MEI device supports D0i3 low power state. Add D0i3 control registers. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 9eb7ed7..6cfb198 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -140,7 +140,8 @@ #define ME_CSR_HA 0xC /* H_HGC_CSR - PGI register */ #define H_HPG_CSR 0x10 - +/* H_D0I3C - D0I3 Control */ +#define H_D0I3C 0x800 /* register bits of H_CSR (Host Control Status register) */ /* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */ @@ -159,7 +160,10 @@ #define H_IS 0x00000002 /* Host Interrupt Enable */ #define H_IE 0x00000001 - +/* Host D0I3 Interrupt Enable */ +#define H_D0I3C_IE 0x00000020 +/* Host D0I3 Interrupt Status */ +#define H_D0I3C_IS 0x00000040 /* register bits of ME_CSR_HA (ME Control Status Host Access register) */ /* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only @@ -183,8 +187,14 @@ access to ME_CBD */ #define ME_IE_HRA 0x00000001 -/* register bits - H_HPG_CSR */ -#define H_HPG_CSR_PGIHEXR 0x00000001 -#define H_HPG_CSR_PGI 0x00000002 +/* H_HPG_CSR register bits */ +#define H_HPG_CSR_PGIHEXR 0x00000001 +#define H_HPG_CSR_PGI 0x00000002 + +/* H_D0I3C register bits */ +#define H_D0I3C_CIP 0x00000001 +#define H_D0I3C_IR 0x00000002 +#define H_D0I3C_I3 0x00000004 +#define H_D0I3C_RR 0x00000008 #endif /* _MEI_HW_MEI_REGS_H_ */ -- cgit v1.1 From bb9f4d26dda7d2a875cadc0f7eedee3d65d3d1f5 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:51 +0300 Subject: mei: me: d0i3: add flag to indicate D0i3 support Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 1 + drivers/misc/mei/hw-me.c | 10 +++++++++- drivers/misc/mei/hw-me.h | 6 ++++-- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 6cfb198..4c8f05e 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -123,6 +123,7 @@ /* Host Firmware Status Registers in PCI Config Space */ #define PCI_CFG_HFS_1 0x40 +# define PCI_CFG_HFS_1_D0I3_MSK 0x80000000 #define PCI_CFG_HFS_2 0x48 #define PCI_CFG_HFS_3 0x60 #define PCI_CFG_HFS_4 0x64 diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 43d7101..17d6894 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -176,12 +176,20 @@ static int mei_me_fw_status(struct mei_device *dev, */ static void mei_me_hw_config(struct mei_device *dev) { + struct pci_dev *pdev = to_pci_dev(dev->dev); struct mei_me_hw *hw = to_me_hw(dev); - u32 hcsr = mei_hcsr_read(dev); + u32 hcsr, reg; + /* Doesn't change in runtime */ + hcsr = mei_hcsr_read(dev); dev->hbuf_depth = (hcsr & H_CBD) >> 24; hw->pg_state = MEI_PG_OFF; + + reg = 0; + pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); + hw->d0i3_supported = + ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); } /** diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h index 6022d52..cf64847 100644 --- a/drivers/misc/mei/hw-me.h +++ b/drivers/misc/mei/hw-me.h @@ -50,13 +50,15 @@ struct mei_cfg { * struct mei_me_hw - me hw specific data * * @cfg: per device generation config and ops - * @mem_addr: io memory address - * @pg_state: power gating state + * @mem_addr: io memory address + * @pg_state: power gating state + * @d0i3_supported: di03 support */ struct mei_me_hw { const struct mei_cfg *cfg; void __iomem *mem_addr; enum mei_pg_state pg_state; + bool d0i3_supported; }; #define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw) -- cgit v1.1 From 1fa55b4e0e161b3d16b52f5bab1b39b39607bc27 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:52 +0300 Subject: mei: me: d0i3: enable d0i3 interrupts D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 4 ++++ drivers/misc/mei/hw-me.c | 35 +++++++++++++++++------------------ drivers/misc/mei/hw-me.h | 2 ++ drivers/misc/mei/pci-me.c | 27 ++++++++++----------------- 4 files changed, 33 insertions(+), 35 deletions(-) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 4c8f05e..8793ccc 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -166,6 +166,10 @@ /* Host D0I3 Interrupt Status */ #define H_D0I3C_IS 0x00000040 +/* H_CSR masks */ +#define H_CSR_IE_MASK (H_IE | H_D0I3C_IE) +#define H_CSR_IS_MASK (H_IS | H_D0I3C_IS) + /* register bits of ME_CSR_HA (ME Control Status Host Access register) */ /* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only access to ME_CBD */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 17d6894..910af88 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -134,7 +134,7 @@ static inline void mei_hcsr_write(struct mei_device *dev, u32 reg) */ static inline void mei_hcsr_set(struct mei_device *dev, u32 reg) { - reg &= ~H_IS; + reg &= ~H_CSR_IS_MASK; mei_hcsr_write(dev, reg); } @@ -216,7 +216,7 @@ static void mei_me_intr_clear(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - if ((hcsr & H_IS) == H_IS) + if (hcsr & H_CSR_IS_MASK) mei_hcsr_write(dev, hcsr); } /** @@ -228,7 +228,7 @@ static void mei_me_intr_enable(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr |= H_IE; + hcsr |= H_CSR_IE_MASK; mei_hcsr_set(dev, hcsr); } @@ -241,7 +241,7 @@ static void mei_me_intr_disable(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr &= ~H_IE; + hcsr &= ~H_CSR_IE_MASK; mei_hcsr_set(dev, hcsr); } @@ -285,12 +285,12 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) hcsr = mei_hcsr_read(dev); } - hcsr |= H_RST | H_IG | H_IS; + hcsr |= H_RST | H_IG | H_CSR_IS_MASK; if (intr_enable) - hcsr |= H_IE; + hcsr |= H_CSR_IE_MASK; else - hcsr &= ~H_IE; + hcsr &= ~H_CSR_IE_MASK; dev->recvd_hw_ready = false; mei_hcsr_write(dev, hcsr); @@ -322,7 +322,7 @@ static void mei_me_host_set_ready(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr |= H_IE | H_IG | H_RDY; + hcsr |= H_CSR_IE_MASK | H_IG | H_RDY; mei_hcsr_set(dev, hcsr); } @@ -767,16 +767,20 @@ static void mei_me_pg_intr(struct mei_device *dev) * * Return: irqreturn_t */ - irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id) { - struct mei_device *dev = (struct mei_device *) dev_id; - u32 hcsr = mei_hcsr_read(dev); + struct mei_device *dev = (struct mei_device *)dev_id; + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr; - if ((hcsr & H_IS) != H_IS) + hcsr = mei_hcsr_read(dev); + if (!(hcsr & H_CSR_IS_MASK)) return IRQ_NONE; - /* clear H_IS bit in H_CSR */ + hw->intr_source = hcsr & H_CSR_IS_MASK; + dev_dbg(dev->dev, "interrupt source 0x%08X.\n", hw->intr_source); + + /* clear H_IS and H_D0I3C_IS bits in H_CSR to clear the interrupts */ mei_hcsr_write(dev, hcsr); return IRQ_WAKE_THREAD; @@ -804,11 +808,6 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) mutex_lock(&dev->device_lock); mei_io_list_init(&complete_list); - /* Ack the interrupt here - * In case of MSI we don't go through the quick handler */ - if (pci_dev_msi_enabled(to_pci_dev(dev->dev))) - mei_clear_interrupts(dev); - /* check if ME wants a reset */ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) { dev_warn(dev->dev, "FW not ready: resetting.\n"); diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h index cf64847..2ee14dc 100644 --- a/drivers/misc/mei/hw-me.h +++ b/drivers/misc/mei/hw-me.h @@ -51,12 +51,14 @@ struct mei_cfg { * * @cfg: per device generation config and ops * @mem_addr: io memory address + * @intr_source: interrupt source * @pg_state: power gating state * @d0i3_supported: di03 support */ struct mei_me_hw { const struct mei_cfg *cfg; void __iomem *mem_addr; + u32 intr_source; enum mei_pg_state pg_state; bool d0i3_supported; }; diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 23f71f5..7fee74a 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -128,6 +128,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) const struct mei_cfg *cfg = (struct mei_cfg *)(ent->driver_data); struct mei_device *dev; struct mei_me_hw *hw; + unsigned int irqflags; int err; @@ -180,17 +181,12 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_enable_msi(pdev); /* request and enable interrupt */ - if (pci_dev_msi_enabled(pdev)) - err = request_threaded_irq(pdev->irq, - NULL, - mei_me_irq_thread_handler, - IRQF_ONESHOT, KBUILD_MODNAME, dev); - else - err = request_threaded_irq(pdev->irq, + irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; + + err = request_threaded_irq(pdev->irq, mei_me_irq_quick_handler, mei_me_irq_thread_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); - + irqflags, KBUILD_MODNAME, dev); if (err) { dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", pdev->irq); @@ -319,6 +315,7 @@ static int mei_me_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct mei_device *dev; + unsigned int irqflags; int err; dev = pci_get_drvdata(pdev); @@ -327,17 +324,13 @@ static int mei_me_pci_resume(struct device *device) pci_enable_msi(pdev); + irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; + /* request and enable interrupt */ - if (pci_dev_msi_enabled(pdev)) - err = request_threaded_irq(pdev->irq, - NULL, - mei_me_irq_thread_handler, - IRQF_ONESHOT, KBUILD_MODNAME, dev); - else - err = request_threaded_irq(pdev->irq, + err = request_threaded_irq(pdev->irq, mei_me_irq_quick_handler, mei_me_irq_thread_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); + irqflags, KBUILD_MODNAME, dev); if (err) { dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", -- cgit v1.1 From 63f75232dbb17badc31c3cc6cc1434763d5a6009 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:53 +0300 Subject: mei: hbm: reorganize the power gating responses Before adding support for D0i3 we need to reorganize the hbm pg handling Move HBM PG response code to dedicated functions in order to unclutter hbm command switch. Add check for the right system state before message processing and return -EPROTO in state mismatch case. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 85 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 70 insertions(+), 15 deletions(-) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 7646569..21f40ce 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -880,6 +880,68 @@ static int mei_hbm_fw_disconnect_req(struct mei_device *dev, } /** + * mei_hbm_pg_enter_res - PG enter response received + * + * @dev: the device structure. + * + * Return: 0 on success, -EPROTO on state mismatch + */ +static int mei_hbm_pg_enter_res(struct mei_device *dev) +{ + if (mei_pg_state(dev) != MEI_PG_OFF || + dev->pg_event != MEI_PG_EVENT_WAIT) { + dev_err(dev->dev, "hbm: pg entry response: state mismatch [%s, %d]\n", + mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); + return -EPROTO; + } + + dev->pg_event = MEI_PG_EVENT_RECEIVED; + wake_up(&dev->wait_pg); + + return 0; +} + +/** + * mei_hbm_pg_exit_res - PG exit response received + * + * @dev: the device structure. + * + * Return: 0 on success, -EPROTO on state mismatch + */ +static int mei_hbm_pg_exit_res(struct mei_device *dev) +{ + if (mei_pg_state(dev) != MEI_PG_ON || + (dev->pg_event != MEI_PG_EVENT_WAIT && + dev->pg_event != MEI_PG_EVENT_IDLE)) { + dev_err(dev->dev, "hbm: pg exit response: state mismatch [%s, %d]\n", + mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); + return -EPROTO; + } + + switch (dev->pg_event) { + case MEI_PG_EVENT_WAIT: + dev->pg_event = MEI_PG_EVENT_RECEIVED; + wake_up(&dev->wait_pg); + break; + case MEI_PG_EVENT_IDLE: + /* + * If the driver is not waiting on this then + * this is HW initiated exit from PG. + * Start runtime pm resume sequence to exit from PG. + */ + dev->pg_event = MEI_PG_EVENT_RECEIVED; + pm_request_resume(dev->dev); + break; + default: + WARN(1, "hbm: pg exit response: unexpected pg event = %d\n", + dev->pg_event); + return -EPROTO; + } + + return 0; +} + +/** * mei_hbm_config_features - check what hbm features and commands * are supported by the fw * @@ -1027,24 +1089,17 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) break; case MEI_PG_ISOLATION_ENTRY_RES_CMD: - dev_dbg(dev->dev, "power gate isolation entry response received\n"); - dev->pg_event = MEI_PG_EVENT_RECEIVED; - if (waitqueue_active(&dev->wait_pg)) - wake_up(&dev->wait_pg); + dev_dbg(dev->dev, "hbm: power gate isolation entry response received\n"); + ret = mei_hbm_pg_enter_res(dev); + if (ret) + return ret; break; case MEI_PG_ISOLATION_EXIT_REQ_CMD: - dev_dbg(dev->dev, "power gate isolation exit request received\n"); - dev->pg_event = MEI_PG_EVENT_RECEIVED; - if (waitqueue_active(&dev->wait_pg)) - wake_up(&dev->wait_pg); - else - /* - * If the driver is not waiting on this then - * this is HW initiated exit from PG. - * Start runtime pm resume sequence to exit from PG. - */ - pm_request_resume(dev->dev); + dev_dbg(dev->dev, "hbm: power gate isolation exit request received\n"); + ret = mei_hbm_pg_exit_res(dev); + if (ret) + return ret; break; case HOST_CLIENT_PROPERTIES_RES_CMD: -- cgit v1.1 From 859ef2ffbfa785d273567467088cc8743f80b5bd Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:54 +0300 Subject: mei: me: d0i3: add d0i3 enter/exit state machine MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rework mei power gating state machine to support entry and exit to and from D0i3 power state. The choice between legacy and D0i3 routines is conditioned on d0i3_supported flag. The patch introduces warning: drivers/misc/mei/hw-me.c:901:12: warning: ‘mei_me_d0i3_enter’ defined but not used [-Wunused-function] it will go away in consequent patch Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 13 +- drivers/misc/mei/hbm.h | 1 + drivers/misc/mei/hw-me.c | 337 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/misc/mei/hw.h | 5 +- 4 files changed, 346 insertions(+), 10 deletions(-) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 21f40ce..8eec887 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -902,6 +902,17 @@ static int mei_hbm_pg_enter_res(struct mei_device *dev) } /** + * mei_hbm_pg_resume - process with PG resume + * + * @dev: the device structure. + */ +void mei_hbm_pg_resume(struct mei_device *dev) +{ + pm_request_resume(dev->dev); +} +EXPORT_SYMBOL_GPL(mei_hbm_pg_resume); + +/** * mei_hbm_pg_exit_res - PG exit response received * * @dev: the device structure. @@ -930,7 +941,7 @@ static int mei_hbm_pg_exit_res(struct mei_device *dev) * Start runtime pm resume sequence to exit from PG. */ dev->pg_event = MEI_PG_EVENT_RECEIVED; - pm_request_resume(dev->dev); + mei_hbm_pg_resume(dev); break; default: WARN(1, "hbm: pg exit response: unexpected pg event = %d\n", diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h index 42d66d8..a2025a5 100644 --- a/drivers/misc/mei/hbm.h +++ b/drivers/misc/mei/hbm.h @@ -54,6 +54,7 @@ int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl); int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl); bool mei_hbm_version_is_supported(struct mei_device *dev); int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd); +void mei_hbm_pg_resume(struct mei_device *dev); int mei_hbm_cl_notify_req(struct mei_device *dev, struct mei_cl *cl, u8 request); diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 910af88..bce4655 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -139,6 +139,35 @@ static inline void mei_hcsr_set(struct mei_device *dev, u32 reg) } /** + * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register + * + * @dev: the device structure + * + * Return: H_D0I3C register value (u32) + */ +static inline u32 mei_me_d0i3c_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C); + trace_mei_reg_read(dev->dev, "H_D0I3C", H_CSR, reg); + + return reg; +} + +/** + * mei_me_d0i3c_write - writes H_D0I3C register to device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_D0I3C", H_CSR, reg); + mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg); +} + +/** * mei_me_fw_status - read fw status register from pci config space * * @dev: mei device @@ -609,13 +638,13 @@ static void mei_me_pg_unset(struct mei_device *dev) } /** - * mei_me_pg_enter_sync - perform pg entry procedure + * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure * * @dev: the device structure * * Return: 0 on success an error code otherwise */ -int mei_me_pg_enter_sync(struct mei_device *dev) +static int mei_me_pg_legacy_enter_sync(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); @@ -646,13 +675,13 @@ int mei_me_pg_enter_sync(struct mei_device *dev) } /** - * mei_me_pg_exit_sync - perform pg exit procedure + * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure * * @dev: the device structure * * Return: 0 on success an error code otherwise */ -int mei_me_pg_exit_sync(struct mei_device *dev) +static int mei_me_pg_legacy_exit_sync(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); @@ -720,8 +749,12 @@ static bool mei_me_pg_in_transition(struct mei_device *dev) */ static bool mei_me_pg_is_enabled(struct mei_device *dev) { + struct mei_me_hw *hw = to_me_hw(dev); u32 reg = mei_me_mecsr_read(dev); + if (hw->d0i3_supported) + return true; + if ((reg & ME_PGIC_HRA) == 0) goto notsupported; @@ -731,7 +764,8 @@ static bool mei_me_pg_is_enabled(struct mei_device *dev) return true; notsupported: - dev_dbg(dev->dev, "pg: not supported: HGP = %d hbm version %d.%d ?= %d.%d\n", + dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n", + hw->d0i3_supported, !!(reg & ME_PGIC_HRA), dev->version.major_version, dev->version.minor_version, @@ -742,11 +776,211 @@ notsupported: } /** - * mei_me_pg_intr - perform pg processing in interrupt thread handler + * mei_me_d0i3_set - write d0i3 register bit on mei device. * * @dev: the device structure + * @intr: ask for interrupt + * + * Return: D0I3C register value */ -static void mei_me_pg_intr(struct mei_device *dev) +static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg |= H_D0I3C_I3; + if (intr) + reg |= H_D0I3C_IR; + else + reg &= ~H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_unset - clean d0i3 register bit on mei device. + * + * @dev: the device structure + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_unset(struct mei_device *dev) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg &= ~H_D0I3C_I3; + reg |= H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_enter_sync - perform d0i3 entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT); + unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); + int ret; + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 set not needed\n"); + ret = 0; + goto on; + } + + /* PGI entry procedure */ + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + /* FIXME: should we reset here? */ + goto out; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + /* end PGI entry procedure */ + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3_set(dev, true); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 enter wait not needed\n"); + ret = 0; + goto on; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +on: + hw->pg_state = MEI_PG_ON; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret); + return ret; +} + +/** + * mei_me_d0i3_enter - perform d0i3 entry procedure + * no hbm PG handshake + * no waiting for confirmation; runs with interrupts + * disabled + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "already d0i3 : set not needed\n"); + goto on; + } + + mei_me_d0i3_set(dev, false); +on: + hw->pg_state = MEI_PG_ON; + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter\n"); + return 0; +} + +/** + * mei_me_d0i3_exit_sync - perform d0i3 exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT); + int ret; + u32 reg; + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + /* we are not in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 exit not needed\n"); + ret = 0; + goto off; + } + + reg = mei_me_d0i3_unset(dev); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 exit wait not needed\n"); + ret = 0; + goto off; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +off: + hw->pg_state = MEI_PG_OFF; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + + dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret); + return ret; +} + +/** + * mei_me_pg_legacy_intr - perform legacy pg processing + * in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_legacy_intr(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); @@ -760,6 +994,95 @@ static void mei_me_pg_intr(struct mei_device *dev) } /** + * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_d0i3_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT && + (hw->intr_source & H_D0I3C_IS)) { + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + if (hw->pg_state == MEI_PG_ON) { + hw->pg_state = MEI_PG_OFF; + if (dev->hbm_state != MEI_HBM_IDLE) { + /* + * force H_RDY because it could be + * wiped off during PG + */ + dev_dbg(dev->dev, "d0i3 set host ready\n"); + mei_me_host_set_ready(dev); + } + } else { + hw->pg_state = MEI_PG_ON; + } + + wake_up(&dev->wait_pg); + } + + if (hw->pg_state == MEI_PG_ON && (hw->intr_source & H_IS)) { + /* + * HW sent some data and we are in D0i3, so + * we got here because of HW initiated exit from D0i3. + * Start runtime pm resume sequence to exit low power state. + */ + dev_dbg(dev->dev, "d0i3 want resume\n"); + mei_hbm_pg_resume(dev); + } +} + +/** + * mei_me_pg_intr - perform pg processing in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + mei_me_d0i3_intr(dev); + else + mei_me_pg_legacy_intr(dev); +} + +/** + * mei_me_pg_enter_sync - perform runtime pm entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_enter_sync(dev); + else + return mei_me_pg_legacy_enter_sync(dev); +} + +/** + * mei_me_pg_exit_sync - perform runtime pm exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_exit_sync(dev); + else + return mei_me_pg_legacy_exit_sync(dev); +} + +/** * mei_me_irq_quick_handler - The ISR of the MEI device * * @irq: The irq number diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index c262d0bd..ad6fbcb 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -31,8 +31,9 @@ #define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */ #define MEI_IAMTHIF_READ_TIMER 10 /* HPS */ -#define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */ -#define MEI_HBM_TIMEOUT 1 /* 1 second */ +#define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */ +#define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */ +#define MEI_HBM_TIMEOUT 1 /* 1 second */ /* * MEI Version -- cgit v1.1 From ebad6b945ee2e7e93454ba52030b93e08290317c Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:55 +0300 Subject: mei: me: d0i3: move mei_me_hw_reset down in the file Move mei_me_hw_reset down in the source file to avoid forward declarations when introducing d0i3 flow in the next patch. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me.c | 103 ++++++++++++++++++++++++----------------------- 1 file changed, 52 insertions(+), 51 deletions(-) diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index bce4655..448f281 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -290,57 +290,6 @@ static void mei_me_hw_reset_release(struct mei_device *dev) /* complete this write before we set host ready on another CPU */ mmiowb(); } -/** - * mei_me_hw_reset - resets fw via mei csr register. - * - * @dev: the device structure - * @intr_enable: if interrupt should be enabled after reset. - * - * Return: always 0 - */ -static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) -{ - u32 hcsr = mei_hcsr_read(dev); - - /* H_RST may be found lit before reset is started, - * for example if preceding reset flow hasn't completed. - * In that case asserting H_RST will be ignored, therefore - * we need to clean H_RST bit to start a successful reset sequence. - */ - if ((hcsr & H_RST) == H_RST) { - dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); - hcsr &= ~H_RST; - mei_hcsr_set(dev, hcsr); - hcsr = mei_hcsr_read(dev); - } - - hcsr |= H_RST | H_IG | H_CSR_IS_MASK; - - if (intr_enable) - hcsr |= H_CSR_IE_MASK; - else - hcsr &= ~H_CSR_IE_MASK; - - dev->recvd_hw_ready = false; - mei_hcsr_write(dev, hcsr); - - /* - * Host reads the H_CSR once to ensure that the - * posted write to H_CSR completes. - */ - hcsr = mei_hcsr_read(dev); - - if ((hcsr & H_RST) == 0) - dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); - - if ((hcsr & H_RDY) == H_RDY) - dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); - - if (intr_enable == false) - mei_me_hw_reset_release(dev); - - return 0; -} /** * mei_me_host_set_ready - enable device @@ -1083,6 +1032,58 @@ int mei_me_pg_exit_sync(struct mei_device *dev) } /** + * mei_me_hw_reset - resets fw via mei csr register. + * + * @dev: the device structure + * @intr_enable: if interrupt should be enabled after reset. + * + * Return: always 0 + */ +static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) +{ + u32 hcsr = mei_hcsr_read(dev); + + /* H_RST may be found lit before reset is started, + * for example if preceding reset flow hasn't completed. + * In that case asserting H_RST will be ignored, therefore + * we need to clean H_RST bit to start a successful reset sequence. + */ + if ((hcsr & H_RST) == H_RST) { + dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); + hcsr = mei_hcsr_read(dev); + } + + hcsr |= H_RST | H_IG | H_CSR_IS_MASK; + + if (intr_enable) + hcsr |= H_CSR_IE_MASK; + else + hcsr &= ~H_CSR_IE_MASK; + + dev->recvd_hw_ready = false; + mei_hcsr_write(dev, hcsr); + + /* + * Host reads the H_CSR once to ensure that the + * posted write to H_CSR completes. + */ + hcsr = mei_hcsr_read(dev); + + if ((hcsr & H_RST) == 0) + dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); + + if ((hcsr & H_RDY) == H_RDY) + dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); + + if (intr_enable == false) + mei_me_hw_reset_release(dev); + + return 0; +} + +/** * mei_me_irq_quick_handler - The ISR of the MEI device * * @irq: The irq number -- cgit v1.1 From b9a1fc99588c2861d4dc26d53b0f47b495cc2964 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 2 Aug 2015 22:20:56 +0300 Subject: mei: me: d0i3: exit d0i3 on driver start and enter it on stop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A BIOS may put the device in d0i3 on platform initialization so it won’t consume power even if the driver is not present, in turn the driver has to wake up the devices on load in order to perform the initialization sequence and move it back to low power state on driver remove. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 448f281..65511d3 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -213,12 +213,17 @@ static void mei_me_hw_config(struct mei_device *dev) hcsr = mei_hcsr_read(dev); dev->hbuf_depth = (hcsr & H_CBD) >> 24; - hw->pg_state = MEI_PG_OFF; - reg = 0; pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); hw->d0i3_supported = ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); + + hw->pg_state = MEI_PG_OFF; + if (hw->d0i3_supported) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) + hw->pg_state = MEI_PG_ON; + } } /** @@ -1037,12 +1042,24 @@ int mei_me_pg_exit_sync(struct mei_device *dev) * @dev: the device structure * @intr_enable: if interrupt should be enabled after reset. * - * Return: always 0 + * Return: 0 on success an error code otherwise */ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) { - u32 hcsr = mei_hcsr_read(dev); + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 hcsr; + + if (intr_enable) { + mei_me_intr_enable(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_exit_sync(dev); + if (ret) + return ret; + } + } + hcsr = mei_hcsr_read(dev); /* H_RST may be found lit before reset is started, * for example if preceding reset flow hasn't completed. * In that case asserting H_RST will be ignored, therefore @@ -1057,9 +1074,7 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) hcsr |= H_RST | H_IG | H_CSR_IS_MASK; - if (intr_enable) - hcsr |= H_CSR_IE_MASK; - else + if (!intr_enable) hcsr &= ~H_CSR_IE_MASK; dev->recvd_hw_ready = false; @@ -1077,9 +1092,14 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) if ((hcsr & H_RDY) == H_RDY) dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); - if (intr_enable == false) + if (!intr_enable) { mei_me_hw_reset_release(dev); - + if (hw->d0i3_supported) { + ret = mei_me_d0i3_enter(dev); + if (ret) + return ret; + } + } return 0; } -- cgit v1.1 From 1625c7ec96942b87eee1463aed6ec0595698b931 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 2 Aug 2015 22:20:57 +0300 Subject: mei: me: add sunrise point device ids Add MEI devices ids for Intel Sunrisepoint Skylake (PCH) Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 4 ++++ drivers/misc/mei/pci-me.c | 5 +++++ 2 files changed, 9 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 8793ccc..a8a68ac 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -117,6 +117,10 @@ #define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */ #define MEI_DEV_ID_WPT_LP_2 0x9CBB /* Wildcat Point LP 2 */ +#define MEI_DEV_ID_SPT 0x9D3A /* Sunrise Point */ +#define MEI_DEV_ID_SPT_2 0x9D3B /* Sunrise Point 2 */ +#define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */ +#define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */ /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 7fee74a..27678d8 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -82,6 +82,11 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP_2, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_cfg)}, + /* required last entry */ {0, } }; -- cgit v1.1 From 155718cfd1dd1a92b7dbf84db41fe15f6b219cc0 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 2 Aug 2015 22:20:58 +0300 Subject: mei: hbm: bump supported HBM version to 2.0 HBM 2.0 version for Sunrise point Skylake (PCH) based devices Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index ad6fbcb..4cebde8 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -38,8 +38,8 @@ /* * MEI Version */ -#define HBM_MINOR_VERSION 1 -#define HBM_MAJOR_VERSION 1 +#define HBM_MINOR_VERSION 0 +#define HBM_MAJOR_VERSION 2 /* * MEI version with PGI support -- cgit v1.1 From eead035a35b59df9f956139cb2c73141751a246e Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 4 Aug 2015 14:30:11 +0300 Subject: mei: remove check on pm_runtime_active in __mei_cl_disconnect Remove bogus check on pm_runtime_active that prevented disconnection from a client in case the device was resuming from power gating but not yet active. Fix regression introduced by 18901357e70ae29e3fd1c58712a6847c2ae52eae mei: disconnect on connection request timeout Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 5fcd70b..a6c87c7 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -853,9 +853,6 @@ static int __mei_cl_disconnect(struct mei_cl *cl) dev = cl->dev; - if (WARN_ON(!pm_runtime_active(dev->dev))) - return -EFAULT; - cl->state = MEI_FILE_DISCONNECTING; cb = mei_io_cb_init(cl, MEI_FOP_DISCONNECT, NULL); -- cgit v1.1 From 06210b42f33ea1c29a90f4db2d88be91c511154b Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:05 -0700 Subject: Drivers: hv: vmbus: remove hv_synic_free_cpu() call from hv_synic_cleanup() We already have hv_synic_free() which frees all per-cpu pages for all CPUs, let's remove the hv_synic_free_cpu() call from hv_synic_cleanup() so it will be possible to do separate cleanup (writing to MSRs) and final freeing. This is going to be used to assist kexec. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv.c | 2 -- drivers/hv/vmbus_drv.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index d3943bc..5b87042 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -530,6 +530,4 @@ void hv_synic_cleanup(void *arg) rdmsrl(HV_X64_MSR_SCONTROL, sctrl.as_uint64); sctrl.enable = 0; wrmsrl(HV_X64_MSR_SCONTROL, sctrl.as_uint64); - - hv_synic_free_cpu(cpu); } diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index cf20400..00d5158 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1120,6 +1120,7 @@ static void __exit vmbus_exit(void) tasklet_kill(hv_context.event_dpc[cpu]); smp_call_function_single(cpu, hv_synic_cleanup, NULL, 1); } + hv_synic_free(); acpi_bus_unregister_driver(&vmbus_acpi_driver); hv_cpu_hotplug_quirk(false); } -- cgit v1.1 From 2b94ed245861a7d378dcde6eef7fa7717e06e349 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:06 -0700 Subject: kexec: define kexec_in_progress in !CONFIG_KEXEC case If some piece of code wants to check kexec_in_progress it has to be put in #ifdef CONFIG_KEXEC block to not break the build in !CONFIG_KEXEC case. Overcome this limitation by defining kexec_in_progress to false. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/kexec.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/kexec.h b/include/linux/kexec.h index e804306..b63218f 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -323,6 +323,7 @@ struct pt_regs; struct task_struct; static inline void crash_kexec(struct pt_regs *regs) { } static inline int kexec_should_crash(struct task_struct *p) { return 0; } +#define kexec_in_progress false #endif /* CONFIG_KEXEC */ #endif /* !defined(__ASSEBMLY__) */ -- cgit v1.1 From 2517281d63a2b09d94aedfb522943617048f337e Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:07 -0700 Subject: Drivers: hv: vmbus: add special kexec handler When general-purpose kexec (not kdump) is being performed in Hyper-V guest the newly booted kernel fails with an MCE error coming from the host. It is the same error which was fixed in the "Drivers: hv: vmbus: Implement the protocol for tearing down vmbus state" commit - monitor pages remain special and when they're being written to (as the new kernel doesn't know these pages are special) bad things happen. We need to perform some minimalistic cleanup before booting a new kernel on kexec. To do so we need to register a special machine_ops.shutdown handler to be executed before the native_machine_shutdown(). Registering a shutdown notification handler via the register_reboot_notifier() call is not sufficient as it happens to early for our purposes. machine_ops is not being exported to modules (and I don't think we want to export it) so let's do this in mshyperv.c The minimalistic cleanup consists of cleaning up clockevents, synic MSRs, guest os id MSR, and hypercall MSR. Kdump doesn't require all this stuff as it lives in a separate memory space. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/mshyperv.h | 2 ++ arch/x86/kernel/cpu/mshyperv.c | 24 ++++++++++++++++++++++++ drivers/hv/vmbus_drv.c | 14 ++++++++++++++ 3 files changed, 40 insertions(+) diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index c163215..d3db910 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -20,4 +20,6 @@ void hyperv_vector_handler(struct pt_regs *regs); void hv_setup_vmbus_irq(void (*handler)(void)); void hv_remove_vmbus_irq(void); +void hv_setup_kexec_handler(void (*handler)(void)); +void hv_remove_kexec_handler(void); #endif diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index aad4bd8..fa483ed 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -28,10 +29,13 @@ #include #include #include +#include struct ms_hyperv_info ms_hyperv; EXPORT_SYMBOL_GPL(ms_hyperv); +static void (*hv_kexec_handler)(void); + #if IS_ENABLED(CONFIG_HYPERV) static void (*vmbus_handler)(void); @@ -67,8 +71,27 @@ void hv_remove_vmbus_irq(void) } EXPORT_SYMBOL_GPL(hv_setup_vmbus_irq); EXPORT_SYMBOL_GPL(hv_remove_vmbus_irq); + +void hv_setup_kexec_handler(void (*handler)(void)) +{ + hv_kexec_handler = handler; +} +EXPORT_SYMBOL_GPL(hv_setup_kexec_handler); + +void hv_remove_kexec_handler(void) +{ + hv_kexec_handler = NULL; +} +EXPORT_SYMBOL_GPL(hv_remove_kexec_handler); #endif +static void hv_machine_shutdown(void) +{ + if (kexec_in_progress && hv_kexec_handler) + hv_kexec_handler(); + native_machine_shutdown(); +} + static uint32_t __init ms_hyperv_platform(void) { u32 eax; @@ -141,6 +164,7 @@ static void __init ms_hyperv_init_platform(void) no_timer_check = 1; #endif + machine_ops.shutdown = hv_machine_shutdown; } const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = { diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 00d5158..31748a2 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1060,6 +1060,17 @@ static struct acpi_driver vmbus_acpi_driver = { }, }; +static void hv_kexec_handler(void) +{ + int cpu; + + hv_synic_clockevents_cleanup(); + vmbus_initiate_unload(); + for_each_online_cpu(cpu) + smp_call_function_single(cpu, hv_synic_cleanup, NULL, 1); + hv_cleanup(); +}; + static int __init hv_acpi_init(void) { int ret, t; @@ -1092,6 +1103,8 @@ static int __init hv_acpi_init(void) if (ret) goto cleanup; + hv_setup_kexec_handler(hv_kexec_handler); + return 0; cleanup: @@ -1104,6 +1117,7 @@ static void __exit vmbus_exit(void) { int cpu; + hv_remove_kexec_handler(); vmbus_connection.conn_state = DISCONNECTED; hv_synic_clockevents_cleanup(); vmbus_disconnect(); -- cgit v1.1 From d7646eaa7678fe5adc42247b4bdfbe9d9db8c253 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:08 -0700 Subject: Drivers: hv: don't do hypercalls when hypercall_page is NULL At the very late stage of kexec a driver (which are not being unloaded) can try to post a message or signal an event. This will crash the kernel as we already did hv_cleanup() and the hypercall page is NULL. Move all common (between 32 and 64 bit code) declarations to the beginning of the do_hypercall() function. Unfortunately we have to write the !hypercall_page check twice to not mix declarations and code. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index 5b87042..41d8072 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -93,11 +93,14 @@ static int query_hypervisor_info(void) */ static u64 do_hypercall(u64 control, void *input, void *output) { -#ifdef CONFIG_X86_64 - u64 hv_status = 0; u64 input_address = (input) ? virt_to_phys(input) : 0; u64 output_address = (output) ? virt_to_phys(output) : 0; void *hypercall_page = hv_context.hypercall_page; +#ifdef CONFIG_X86_64 + u64 hv_status = 0; + + if (!hypercall_page) + return (u64)ULLONG_MAX; __asm__ __volatile__("mov %0, %%r8" : : "r" (output_address) : "r8"); __asm__ __volatile__("call *%3" : "=a" (hv_status) : @@ -112,13 +115,13 @@ static u64 do_hypercall(u64 control, void *input, void *output) u32 control_lo = control & 0xFFFFFFFF; u32 hv_status_hi = 1; u32 hv_status_lo = 1; - u64 input_address = (input) ? virt_to_phys(input) : 0; u32 input_address_hi = input_address >> 32; u32 input_address_lo = input_address & 0xFFFFFFFF; - u64 output_address = (output) ? virt_to_phys(output) : 0; u32 output_address_hi = output_address >> 32; u32 output_address_lo = output_address & 0xFFFFFFFF; - void *hypercall_page = hv_context.hypercall_page; + + if (!hypercall_page) + return (u64)ULLONG_MAX; __asm__ __volatile__ ("call *%8" : "=d"(hv_status_hi), "=a"(hv_status_lo) : "d" (control_hi), -- cgit v1.1 From b4370df2b1f5158de028e167974263c5757b34a6 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:09 -0700 Subject: Drivers: hv: vmbus: add special crash handler Full kernel hang is observed when kdump kernel starts after a crash. This hang happens in vmbus_negotiate_version() function on wait_for_completion() as Hyper-V host (Win2012R2 in my testing) never responds to CHANNELMSG_INITIATE_CONTACT as it thinks the connection is already established. We need to perform some mandatory minimalistic cleanup before we start new kernel. Reported-by: K. Y. Srinivasan Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/mshyperv.h | 2 ++ arch/x86/kernel/cpu/mshyperv.c | 22 ++++++++++++++++++++++ drivers/hv/vmbus_drv.c | 14 ++++++++++++++ 3 files changed, 38 insertions(+) diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index d3db910..d02f9c9 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -22,4 +22,6 @@ void hv_remove_vmbus_irq(void); void hv_setup_kexec_handler(void (*handler)(void)); void hv_remove_kexec_handler(void); +void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs)); +void hv_remove_crash_handler(void); #endif diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index fa483ed..5ea5bbc 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -35,6 +35,7 @@ struct ms_hyperv_info ms_hyperv; EXPORT_SYMBOL_GPL(ms_hyperv); static void (*hv_kexec_handler)(void); +static void (*hv_crash_handler)(struct pt_regs *regs); #if IS_ENABLED(CONFIG_HYPERV) static void (*vmbus_handler)(void); @@ -83,6 +84,18 @@ void hv_remove_kexec_handler(void) hv_kexec_handler = NULL; } EXPORT_SYMBOL_GPL(hv_remove_kexec_handler); + +void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs)) +{ + hv_crash_handler = handler; +} +EXPORT_SYMBOL_GPL(hv_setup_crash_handler); + +void hv_remove_crash_handler(void) +{ + hv_crash_handler = NULL; +} +EXPORT_SYMBOL_GPL(hv_remove_crash_handler); #endif static void hv_machine_shutdown(void) @@ -92,6 +105,14 @@ static void hv_machine_shutdown(void) native_machine_shutdown(); } +static void hv_machine_crash_shutdown(struct pt_regs *regs) +{ + if (hv_crash_handler) + hv_crash_handler(regs); + native_machine_crash_shutdown(regs); +} + + static uint32_t __init ms_hyperv_platform(void) { u32 eax; @@ -165,6 +186,7 @@ static void __init ms_hyperv_init_platform(void) #endif machine_ops.shutdown = hv_machine_shutdown; + machine_ops.crash_shutdown = hv_machine_crash_shutdown; } const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = { diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 31748a2..1ed9b32 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1071,6 +1071,18 @@ static void hv_kexec_handler(void) hv_cleanup(); }; +static void hv_crash_handler(struct pt_regs *regs) +{ + vmbus_initiate_unload(); + /* + * In crash handler we can't schedule synic cleanup for all CPUs, + * doing the cleanup for current CPU only. This should be sufficient + * for kdump. + */ + hv_synic_cleanup(NULL); + hv_cleanup(); +}; + static int __init hv_acpi_init(void) { int ret, t; @@ -1104,6 +1116,7 @@ static int __init hv_acpi_init(void) goto cleanup; hv_setup_kexec_handler(hv_kexec_handler); + hv_setup_crash_handler(hv_crash_handler); return 0; @@ -1118,6 +1131,7 @@ static void __exit vmbus_exit(void) int cpu; hv_remove_kexec_handler(); + hv_remove_crash_handler(); vmbus_connection.conn_state = DISCONNECTED; hv_synic_clockevents_cleanup(); vmbus_disconnect(); -- cgit v1.1 From 510f7aef65bb7ed22cf9c7f94f955727f963ede4 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:10 -0700 Subject: Drivers: hv: vmbus: prefer 'die' notification chain to 'panic' current_pt_regs() sometimes returns regs of the userspace process and in case of a kernel crash this is not what we need to report. E.g. when we trigger crash with sysrq we see the following: ... RIP: 0010:[] [] sysrq_handle_crash+0x16/0x20 RSP: 0018:ffff8800db0a7d88 EFLAGS: 00010246 RAX: 000000000000000f RBX: ffffffff820a0660 RCX: 0000000000000000 ... at the same time current_pt_regs() give us: ip=7f899ea7e9e0, ax=ffffffffffffffda, bx=26c81a0, cx=7f899ea7e9e0, ... These registers come from the userspace process triggered the crash. As we don't even know which process it was this information is rather useless. When kernel crash happens through 'die' proper regs are being passed to all receivers on the die_chain (and panic_notifier_list is being notified with the string passed to panic() only). If panic() is called manually (e.g. on BUG()) we won't get 'die' notification so keep the 'panic' notification reporter as well but guard against double reporting. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 40 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 4 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 1ed9b32..b6114cc 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "hyperv_vmbus.h" static struct acpi_device *hv_acpi_dev; @@ -48,12 +49,18 @@ static struct completion probe_event; static int irq; -static int hyperv_panic_event(struct notifier_block *nb, - unsigned long event, void *ptr) +static void hyperv_report_panic(struct pt_regs *regs) { - struct pt_regs *regs; + static bool panic_reported; - regs = current_pt_regs(); + /* + * We prefer to report panic on 'die' chain as we have proper + * registers to report, but if we miss it (e.g. on BUG()) we need + * to report it on 'panic'. + */ + if (panic_reported) + return; + panic_reported = true; wrmsrl(HV_X64_MSR_CRASH_P0, regs->ip); wrmsrl(HV_X64_MSR_CRASH_P1, regs->ax); @@ -65,9 +72,32 @@ static int hyperv_panic_event(struct notifier_block *nb, * Let Hyper-V know there is crash data available */ wrmsrl(HV_X64_MSR_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY); +} + +static int hyperv_panic_event(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct pt_regs *regs; + + regs = current_pt_regs(); + + hyperv_report_panic(regs); return NOTIFY_DONE; } +static int hyperv_die_event(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct die_args *die = (struct die_args *)args; + struct pt_regs *regs = die->regs; + + hyperv_report_panic(regs); + return NOTIFY_DONE; +} + +static struct notifier_block hyperv_die_block = { + .notifier_call = hyperv_die_event, +}; static struct notifier_block hyperv_panic_block = { .notifier_call = hyperv_panic_event, }; @@ -842,6 +872,7 @@ static int vmbus_bus_init(int irq) * Only register if the crash MSRs are available */ if (ms_hyperv.features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { + register_die_notifier(&hyperv_die_block); atomic_notifier_chain_register(&panic_notifier_list, &hyperv_panic_block); } @@ -1139,6 +1170,7 @@ static void __exit vmbus_exit(void) tasklet_kill(&msg_dpc); vmbus_free_channels(); if (ms_hyperv.features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { + unregister_die_notifier(&hyperv_die_block); atomic_notifier_chain_unregister(&panic_notifier_list, &hyperv_panic_block); } -- cgit v1.1 From b36fda339729a974a8838978dcdc581d8ce68fd9 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:11 -0700 Subject: Drivers: hv: kvp: check kzalloc return value kzalloc() return value check was accidentally lost in 11bc3a5fa91f: "Drivers: hv: kvp: convert to hv_utils_transport" commit. We don't need to reset kvp_transaction.state here as we have the kvp_timeout_func() timeout function and in case we're in OOM situation it is preferable to wait. Reported-by: Dan Carpenter Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index d85798d..74c38a9 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -353,6 +353,9 @@ kvp_send_key(struct work_struct *dummy) return; message = kzalloc(sizeof(*message), GFP_KERNEL); + if (!message) + return; + message->kvp_hdr.operation = operation; message->kvp_hdr.pool = pool; in_msg = kvp_transaction.kvp_msg; -- cgit v1.1 From 25ef06fe27a292ad33155045ef7a123be4c0b6ab Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:12 -0700 Subject: Drivers: hv: fcopy: dynamically allocate smsg_out in fcopy_send_data() struct hv_start_fcopy is too big to be on stack on i386, the following warning is reported: >> drivers/hv/hv_fcopy.c:159:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] Reported-by: kbuild test robot Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_fcopy.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c index b50dd33..db4b887 100644 --- a/drivers/hv/hv_fcopy.c +++ b/drivers/hv/hv_fcopy.c @@ -116,7 +116,7 @@ static int fcopy_handle_handshake(u32 version) static void fcopy_send_data(struct work_struct *dummy) { - struct hv_start_fcopy smsg_out; + struct hv_start_fcopy *smsg_out = NULL; int operation = fcopy_transaction.fcopy_msg->operation; struct hv_start_fcopy *smsg_in; void *out_src; @@ -136,21 +136,24 @@ static void fcopy_send_data(struct work_struct *dummy) switch (operation) { case START_FILE_COPY: out_len = sizeof(struct hv_start_fcopy); - memset(&smsg_out, 0, out_len); - smsg_out.hdr.operation = operation; + smsg_out = kzalloc(sizeof(*smsg_out), GFP_KERNEL); + if (!smsg_out) + return; + + smsg_out->hdr.operation = operation; smsg_in = (struct hv_start_fcopy *)fcopy_transaction.fcopy_msg; utf16s_to_utf8s((wchar_t *)smsg_in->file_name, W_MAX_PATH, UTF16_LITTLE_ENDIAN, - (__u8 *)&smsg_out.file_name, W_MAX_PATH - 1); + (__u8 *)&smsg_out->file_name, W_MAX_PATH - 1); utf16s_to_utf8s((wchar_t *)smsg_in->path_name, W_MAX_PATH, UTF16_LITTLE_ENDIAN, - (__u8 *)&smsg_out.path_name, W_MAX_PATH - 1); + (__u8 *)&smsg_out->path_name, W_MAX_PATH - 1); - smsg_out.copy_flags = smsg_in->copy_flags; - smsg_out.file_size = smsg_in->file_size; - out_src = &smsg_out; + smsg_out->copy_flags = smsg_in->copy_flags; + smsg_out->file_size = smsg_in->file_size; + out_src = smsg_out; break; default: @@ -168,6 +171,8 @@ static void fcopy_send_data(struct work_struct *dummy) fcopy_transaction.state = HVUTIL_READY; } } + kfree(smsg_out); + return; } -- cgit v1.1 From b6ddeae1603dfa55e857ba1520f5acea83f8cf1c Mon Sep 17 00:00:00 2001 From: Alex Ng Date: Sat, 1 Aug 2015 16:08:13 -0700 Subject: Drivers: hv: balloon: Enable dynamic memory protocol negotiation with Windows 10 hosts Support Win10 protocol for Dynamic Memory. Thia patch allows guests on Win10 hosts to hot-add memory even when dynamic memory is not enabled on the guest. Signed-off-by: Alex Ng Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_balloon.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index 8a725cd..b853b4b 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -62,11 +62,13 @@ enum { DYNMEM_PROTOCOL_VERSION_1 = DYNMEM_MAKE_VERSION(0, 3), DYNMEM_PROTOCOL_VERSION_2 = DYNMEM_MAKE_VERSION(1, 0), + DYNMEM_PROTOCOL_VERSION_3 = DYNMEM_MAKE_VERSION(2, 0), DYNMEM_PROTOCOL_VERSION_WIN7 = DYNMEM_PROTOCOL_VERSION_1, DYNMEM_PROTOCOL_VERSION_WIN8 = DYNMEM_PROTOCOL_VERSION_2, + DYNMEM_PROTOCOL_VERSION_WIN10 = DYNMEM_PROTOCOL_VERSION_3, - DYNMEM_PROTOCOL_VERSION_CURRENT = DYNMEM_PROTOCOL_VERSION_WIN8 + DYNMEM_PROTOCOL_VERSION_CURRENT = DYNMEM_PROTOCOL_VERSION_WIN10 }; @@ -1296,13 +1298,25 @@ static void version_resp(struct hv_dynmem_device *dm, if (dm->next_version == 0) goto version_error; - dm->next_version = 0; memset(&version_req, 0, sizeof(struct dm_version_request)); version_req.hdr.type = DM_VERSION_REQUEST; version_req.hdr.size = sizeof(struct dm_version_request); version_req.hdr.trans_id = atomic_inc_return(&trans_id); - version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN7; - version_req.is_last_attempt = 1; + version_req.version.version = dm->next_version; + + /* + * Set the next version to try in case current version fails. + * Win7 protocol ought to be the last one to try. + */ + switch (version_req.version.version) { + case DYNMEM_PROTOCOL_VERSION_WIN8: + dm->next_version = DYNMEM_PROTOCOL_VERSION_WIN7; + version_req.is_last_attempt = 0; + break; + default: + dm->next_version = 0; + version_req.is_last_attempt = 1; + } ret = vmbus_sendpacket(dm->dev->channel, &version_req, sizeof(struct dm_version_request), @@ -1442,7 +1456,7 @@ static int balloon_probe(struct hv_device *dev, dm_device.dev = dev; dm_device.state = DM_INITIALIZING; - dm_device.next_version = DYNMEM_PROTOCOL_VERSION_WIN7; + dm_device.next_version = DYNMEM_PROTOCOL_VERSION_WIN8; init_completion(&dm_device.host_event); init_completion(&dm_device.config_event); INIT_LIST_HEAD(&dm_device.ha_region_list); @@ -1474,7 +1488,7 @@ static int balloon_probe(struct hv_device *dev, version_req.hdr.type = DM_VERSION_REQUEST; version_req.hdr.size = sizeof(struct dm_version_request); version_req.hdr.trans_id = atomic_inc_return(&trans_id); - version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN8; + version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN10; version_req.is_last_attempt = 0; ret = vmbus_sendpacket(dev->channel, &version_req, -- cgit v1.1 From b81658cf5d44e07c70c93e3b2aefe848eaaba99f Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 1 Aug 2015 16:08:14 -0700 Subject: Drivers: hv: vmbus: Permit sending of packets without payload The guest may have to send a completion packet back to the host. To support this usage, permit sending a packet without a payload - we would be only sending the descriptor in this case. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 603ce97..c4dcab0 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -601,6 +601,7 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer, u64 aligned_data = 0; int ret; bool signal = false; + int num_vecs = ((bufferlen != 0) ? 3 : 1); /* Setup the descriptor */ @@ -618,7 +619,8 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer, bufferlist[2].iov_base = &aligned_data; bufferlist[2].iov_len = (packetlen_aligned - packetlen); - ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal); + ret = hv_ringbuffer_write(&channel->outbound, bufferlist, num_vecs, + &signal); /* * Signalling the host is conditional on many factors: -- cgit v1.1 From 9dd6a06430c94299651d74b9ed5ca8396ab8ff1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 1 Aug 2015 16:08:17 -0700 Subject: hv: util: checking the wrong variable We don't catch this allocation failure because there is a typo and we check the wrong variable. Fixes: 14b50f80c32d ('Drivers: hv: util: introduce hv_utils_transport abstraction') Signed-off-by: Dan Carpenter Reviewed-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_utils_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/hv_utils_transport.c b/drivers/hv/hv_utils_transport.c index ea7ba5e..6a9d80a 100644 --- a/drivers/hv/hv_utils_transport.c +++ b/drivers/hv/hv_utils_transport.c @@ -186,7 +186,7 @@ int hvutil_transport_send(struct hvutil_transport *hvt, void *msg, int len) return -EINVAL; } else if (hvt->mode == HVUTIL_TRANSPORT_NETLINK) { cn_msg = kzalloc(sizeof(*cn_msg) + len, GFP_ATOMIC); - if (!msg) + if (!cn_msg) return -ENOMEM; cn_msg->id.idx = hvt->cn_id.idx; cn_msg->id.val = hvt->cn_id.val; -- cgit v1.1 From e26009aad095feae45a6e79bb022c55a969ecded Mon Sep 17 00:00:00 2001 From: Nik Nyby Date: Sat, 1 Aug 2015 16:08:18 -0700 Subject: Drivers: hv: vmbus: fix typo in hv_port_info struct This fixes a typo: base_flag_bumber to base_flag_number Signed-off-by: Nik Nyby Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hyperv_vmbus.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index cddc0c9..6383707 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -141,7 +141,7 @@ struct hv_port_info { struct { u32 target_sint; u32 target_vp; - u16 base_flag_bumber; + u16 base_flag_number; u16 flag_count; u32 rsvdz; } event_port_info; -- cgit v1.1 From 4a54243fc08f0edda1303bb666f0da68c378c036 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 1 Aug 2015 16:08:19 -0700 Subject: Drivers: hv: vmbus: don't send CHANNELMSG_UNLOAD on pre-Win2012R2 hosts Pre-Win2012R2 hosts don't properly handle CHANNELMSG_UNLOAD and wait_for_completion() hangs. Avoid sending such request on old hosts. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 4506a66..00ba3f3 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -469,6 +469,10 @@ void vmbus_initiate_unload(void) { struct vmbus_channel_message_header hdr; + /* Pre-Win2012R2 hosts don't support reconnect */ + if (vmbus_proto_version < VERSION_WIN8_1) + return; + init_completion(&vmbus_connection.unload_event); memset(&hdr, 0, sizeof(struct vmbus_channel_message_header)); hdr.msgtype = CHANNELMSG_UNLOAD; -- cgit v1.1 From cc2dd4027a43bb36c846f195a764edabc0828602 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Sat, 1 Aug 2015 16:08:20 -0700 Subject: mshyperv: fix recognition of Hyper-V guest crash MSR's Hypervisor Top Level Functional Specification v3.1/4.0 notes that cpuid (0x40000003) EDX's 10th bit should be used to check that Hyper-V guest crash MSR's functionality available. This patch should fix this recognition. Currently the code checks EAX register instead of EDX. Signed-off-by: Andrey Smetanin Signed-off-by: Denis V. Lunev Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/mshyperv.h | 1 + arch/x86/kernel/cpu/mshyperv.c | 1 + drivers/hv/vmbus_drv.c | 4 ++-- 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index d02f9c9..aaf59b7 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -7,6 +7,7 @@ struct ms_hyperv_info { u32 features; + u32 misc_features; u32 hints; }; diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index 5ea5bbc..f794bfa 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -158,6 +158,7 @@ static void __init ms_hyperv_init_platform(void) * Extract the features and hints */ ms_hyperv.features = cpuid_eax(HYPERV_CPUID_FEATURES); + ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES); ms_hyperv.hints = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO); printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n", diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index b6114cc..e7b0bcd 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -871,7 +871,7 @@ static int vmbus_bus_init(int irq) /* * Only register if the crash MSRs are available */ - if (ms_hyperv.features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { + if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { register_die_notifier(&hyperv_die_block); atomic_notifier_chain_register(&panic_notifier_list, &hyperv_panic_block); @@ -1169,7 +1169,7 @@ static void __exit vmbus_exit(void) hv_remove_vmbus_irq(); tasklet_kill(&msg_dpc); vmbus_free_channels(); - if (ms_hyperv.features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { + if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { unregister_die_notifier(&hyperv_die_block); atomic_notifier_chain_unregister(&panic_notifier_list, &hyperv_panic_block); -- cgit v1.1 From 379e4f756b915bcc35958365e5d1326b3b54efce Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 1 Aug 2015 16:08:21 -0700 Subject: Drivers: hv: vmbus: Consider ND NIC in binding channels to CPUs We cycle through all the "high performance" channels to distribute load across the available CPUs. Process the NetworkDirect as a high performance device. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 00ba3f3..30613df 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -347,6 +347,7 @@ enum { IDE = 0, SCSI, NIC, + ND_NIC, MAX_PERF_CHN, }; -- cgit v1.1 From f368ed6088ae9c1fbe1c897bb5f215ce5e63fa1e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 30 Jul 2015 15:59:57 -0700 Subject: char: make misc_deregister a void function With well over 200+ users of this api, there are a mere 12 users that actually checked the return value of this function. And all of them really didn't do anything with that information as the system or module was shutting down no matter what. So stop pretending like it matters, and just return void from misc_deregister(). If something goes wrong in the call, you will get a WARNING splat in the syslog so you know how to fix up your driver. Other than that, there's nothing that can go wrong. Cc: Alasdair Kergon Cc: Neil Brown Cc: Oleg Drokin Cc: Andreas Dilger Cc: "Michael S. Tsirkin" Cc: Wim Van Sebroeck Cc: Christine Caulfield Cc: David Teigland Cc: Mark Fasheh Acked-by: Joel Becker Acked-by: Alexandre Belloni Acked-by: Alessandro Zummo Acked-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/char/misc.c | 9 +++------ drivers/md/dm-ioctl.c | 4 +--- drivers/misc/vmw_vmci/vmci_host.c | 7 +------ drivers/rtc/rtc-ds1374.c | 5 ++--- drivers/staging/android/ashmem.c | 7 +------ drivers/staging/android/ion/ion_test.c | 3 ++- drivers/staging/lustre/lustre/libcfs/module.c | 4 +--- drivers/vhost/scsi.c | 4 ++-- drivers/watchdog/at91rm9200_wdt.c | 5 ++--- drivers/watchdog/ks8695_wdt.c | 9 +++------ drivers/watchdog/ts72xx_wdt.c | 3 ++- fs/btrfs/super.c | 3 +-- fs/dlm/plock.c | 3 +-- fs/dlm/user.c | 9 +++------ fs/ocfs2/stack_user.c | 9 +-------- include/linux/miscdevice.h | 2 +- 16 files changed, 27 insertions(+), 59 deletions(-) diff --git a/drivers/char/misc.c b/drivers/char/misc.c index c83ef96..8069b36 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -243,17 +243,15 @@ int misc_register(struct miscdevice * misc) * @misc: device to unregister * * Unregister a miscellaneous device that was previously - * successfully registered with misc_register(). Success - * is indicated by a zero return, a negative errno code - * indicates an error. + * successfully registered with misc_register(). */ -int misc_deregister(struct miscdevice *misc) +void misc_deregister(struct miscdevice *misc) { int i = DYNAMIC_MINORS - misc->minor - 1; if (WARN_ON(list_empty(&misc->list))) - return -EINVAL; + return; mutex_lock(&misc_mtx); list_del(&misc->list); @@ -261,7 +259,6 @@ int misc_deregister(struct miscdevice *misc) if (i < DYNAMIC_MINORS && i >= 0) clear_bit(i, misc_minors); mutex_unlock(&misc_mtx); - return 0; } EXPORT_SYMBOL(misc_register); diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 720ceeb..80a4395 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1919,9 +1919,7 @@ int __init dm_interface_init(void) void dm_interface_exit(void) { - if (misc_deregister(&_dm_misc) < 0) - DMERR("misc_deregister failed for control device"); - + misc_deregister(&_dm_misc); dm_hash_exit(); } diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c index a721b5d..9ec262a 100644 --- a/drivers/misc/vmw_vmci/vmci_host.c +++ b/drivers/misc/vmw_vmci/vmci_host.c @@ -1031,14 +1031,9 @@ int __init vmci_host_init(void) void __exit vmci_host_exit(void) { - int error; - vmci_host_device_initialized = false; - error = misc_deregister(&vmci_host_miscdev); - if (error) - pr_warn("Error unregistering character device: %d\n", error); - + misc_deregister(&vmci_host_miscdev); vmci_ctx_destroy(host_context); vmci_qp_broker_exit(); diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 167783f..72c9333 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -666,9 +666,8 @@ static int ds1374_remove(struct i2c_client *client) #ifdef CONFIG_RTC_DRV_DS1374_WDT int res; - res = misc_deregister(&ds1374_miscdev); - if (!res) - ds1374_miscdev.parent = NULL; + misc_deregister(&ds1374_miscdev); + ds1374_miscdev.parent = NULL; unregister_reboot_notifier(&ds1374_wdt_notifier); #endif diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c index c5c037c..2c75d90 100644 --- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -863,14 +863,9 @@ static int __init ashmem_init(void) static void __exit ashmem_exit(void) { - int ret; - unregister_shrinker(&ashmem_shrinker); - ret = misc_deregister(&ashmem_misc); - if (unlikely(ret)) - pr_err("failed to unregister misc device!\n"); - + misc_deregister(&ashmem_misc); kmem_cache_destroy(ashmem_range_cachep); kmem_cache_destroy(ashmem_area_cachep); diff --git a/drivers/staging/android/ion/ion_test.c b/drivers/staging/android/ion/ion_test.c index 7d6e6b6..b8dcf5a 100644 --- a/drivers/staging/android/ion/ion_test.c +++ b/drivers/staging/android/ion/ion_test.c @@ -269,7 +269,8 @@ static int ion_test_remove(struct platform_device *pdev) if (!testdev) return -ENODATA; - return misc_deregister(&testdev->misc); + misc_deregister(&testdev->misc); + return 0; } static struct platform_device *ion_test_pdev; diff --git a/drivers/staging/lustre/lustre/libcfs/module.c b/drivers/staging/lustre/lustre/libcfs/module.c index e60b2e9..e707400 100644 --- a/drivers/staging/lustre/lustre/libcfs/module.c +++ b/drivers/staging/lustre/lustre/libcfs/module.c @@ -467,9 +467,7 @@ static void exit_libcfs_module(void) cfs_crypto_unregister(); cfs_wi_shutdown(); - rc = misc_deregister(&libcfs_dev); - if (rc) - CERROR("misc_deregister error %d\n", rc); + misc_deregister(&libcfs_dev); cfs_cpu_fini(); diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index dfcc02c..f114a9d 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1573,9 +1573,9 @@ static int __init vhost_scsi_register(void) return misc_register(&vhost_scsi_misc); } -static int vhost_scsi_deregister(void) +static void vhost_scsi_deregister(void) { - return misc_deregister(&vhost_scsi_misc); + misc_deregister(&vhost_scsi_misc); } static char *vhost_scsi_dump_proto_id(struct vhost_scsi_tport *tport) diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 41cecb5..9ba1153 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -269,9 +269,8 @@ static int at91wdt_remove(struct platform_device *pdev) if (res) dev_warn(dev, "failed to unregister restart handler\n"); - res = misc_deregister(&at91wdt_miscdev); - if (!res) - at91wdt_miscdev.parent = NULL; + misc_deregister(&at91wdt_miscdev); + at91wdt_miscdev.parent = NULL; return res; } diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index b7ea39b..1e41818 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -254,13 +254,10 @@ static int ks8695wdt_probe(struct platform_device *pdev) static int ks8695wdt_remove(struct platform_device *pdev) { - int res; - - res = misc_deregister(&ks8695wdt_miscdev); - if (!res) - ks8695wdt_miscdev.parent = NULL; + misc_deregister(&ks8695wdt_miscdev); + ks8695wdt_miscdev.parent = NULL; - return res; + return 0; } static void ks8695wdt_shutdown(struct platform_device *pdev) diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 119beb7..4b54193 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -428,7 +428,8 @@ static int ts72xx_wdt_probe(struct platform_device *pdev) static int ts72xx_wdt_remove(struct platform_device *pdev) { - return misc_deregister(&ts72xx_wdt_miscdev); + misc_deregister(&ts72xx_wdt_miscdev); + return 0; } static struct platform_driver ts72xx_wdt_driver = { diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index cd7ef34..6bad633 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -2163,8 +2163,7 @@ static int btrfs_interface_init(void) static void btrfs_interface_exit(void) { - if (misc_deregister(&btrfs_misc) < 0) - printk(KERN_INFO "BTRFS: misc_deregister failed for control device\n"); + misc_deregister(&btrfs_misc); } static void btrfs_print_info(void) diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index e0ab3a9..5532f09 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -509,7 +509,6 @@ int dlm_plock_init(void) void dlm_plock_exit(void) { - if (misc_deregister(&plock_dev_misc) < 0) - log_print("dlm_plock_exit: misc_deregister failed"); + misc_deregister(&plock_dev_misc); } diff --git a/fs/dlm/user.c b/fs/dlm/user.c index fb85f32..75ecc0d 100644 --- a/fs/dlm/user.c +++ b/fs/dlm/user.c @@ -362,18 +362,15 @@ fail: int dlm_device_deregister(struct dlm_ls *ls) { - int error; - /* The device is not registered. This happens when the lockspace was never used from userspace, or when device_create_lockspace() calls dlm_release_lockspace() after the register fails. */ if (!ls->ls_device.name) return 0; - error = misc_deregister(&ls->ls_device); - if (!error) - kfree(ls->ls_device.name); - return error; + misc_deregister(&ls->ls_device); + kfree(ls->ls_device.name); + return 0; } static int device_user_purge(struct dlm_user_proc *proc, diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index 2768eb1..ced70c8 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -655,14 +655,7 @@ static int ocfs2_control_init(void) static void ocfs2_control_exit(void) { - int rc; - - rc = misc_deregister(&ocfs2_control_device); - if (rc) - printk(KERN_ERR - "ocfs2: Unable to deregister ocfs2_control device " - "(errno %d)\n", - -rc); + misc_deregister(&ocfs2_control_device); } static void fsdlm_lock_ast_wrapper(void *astarg) diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 819077c..81f6e42 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -67,7 +67,7 @@ struct miscdevice { }; extern int misc_register(struct miscdevice *misc); -extern int misc_deregister(struct miscdevice *misc); +extern void misc_deregister(struct miscdevice *misc); #define MODULE_ALIAS_MISCDEV(minor) \ MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR) \ -- cgit v1.1 From 7f163a6fd957a85f7f66a129db1ad243a44399ee Mon Sep 17 00:00:00 2001 From: Jake Oshins Date: Wed, 5 Aug 2015 00:52:36 -0700 Subject: drivers:hv: Modify hv_vmbus to search for all MMIO ranges available. This patch changes the logic in hv_vmbus to record all of the ranges in the VM's firmware (BIOS or UEFI) that offer regions of memory-mapped I/O space for use by paravirtual front-end drivers. The old logic just found one range above 4GB and called it good. This logic will find any ranges above 1MB. It would have been possible with this patch to just use existing resource allocation functions, rather than keep track of the entire set of Hyper-V related MMIO regions in VMBus. This strategy, however, is not sufficient when the resource allocator needs to be aware of the constraints of a Hyper-V virtual machine, which is what happens in the next patch in the series. So this first patch exists to show the first steps in reworking the MMIO allocation paths for Hyper-V front-end drivers. Signed-off-by: Jake Oshins Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 116 +++++++++++++++++++++++++++++++--------- drivers/video/fbdev/hyperv_fb.c | 2 +- include/linux/hyperv.h | 2 +- 3 files changed, 92 insertions(+), 28 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index e7b0bcd..ee59e06 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -102,10 +102,7 @@ static struct notifier_block hyperv_panic_block = { .notifier_call = hyperv_panic_event, }; -struct resource hyperv_mmio = { - .name = "hyperv mmio", - .flags = IORESOURCE_MEM, -}; +struct resource *hyperv_mmio; EXPORT_SYMBOL_GPL(hyperv_mmio); static int vmbus_exists(void) @@ -1013,30 +1010,105 @@ void vmbus_device_unregister(struct hv_device *device_obj) /* - * VMBUS is an acpi enumerated device. Get the the information we + * VMBUS is an acpi enumerated device. Get the information we * need from DSDT. */ - +#define VTPM_BASE_ADDRESS 0xfed40000 static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx) { + resource_size_t start = 0; + resource_size_t end = 0; + struct resource *new_res; + struct resource **old_res = &hyperv_mmio; + struct resource **prev_res = NULL; + switch (res->type) { case ACPI_RESOURCE_TYPE_IRQ: irq = res->data.irq.interrupts[0]; + return AE_OK; + + /* + * "Address" descriptors are for bus windows. Ignore + * "memory" descriptors, which are for registers on + * devices. + */ + case ACPI_RESOURCE_TYPE_ADDRESS32: + start = res->data.address32.address.minimum; + end = res->data.address32.address.maximum; break; case ACPI_RESOURCE_TYPE_ADDRESS64: - hyperv_mmio.start = res->data.address64.address.minimum; - hyperv_mmio.end = res->data.address64.address.maximum; + start = res->data.address64.address.minimum; + end = res->data.address64.address.maximum; break; + + default: + /* Unused resource type */ + return AE_OK; + } + /* + * Ignore ranges that are below 1MB, as they're not + * necessary or useful here. + */ + if (end < 0x100000) + return AE_OK; + + new_res = kzalloc(sizeof(*new_res), GFP_ATOMIC); + if (!new_res) + return AE_NO_MEMORY; + + /* If this range overlaps the virtual TPM, truncate it. */ + if (end > VTPM_BASE_ADDRESS && start < VTPM_BASE_ADDRESS) + end = VTPM_BASE_ADDRESS; + + new_res->name = "hyperv mmio"; + new_res->flags = IORESOURCE_MEM; + new_res->start = start; + new_res->end = end; + + do { + if (!*old_res) { + *old_res = new_res; + break; + } + + if ((*old_res)->end < new_res->start) { + new_res->sibling = *old_res; + if (prev_res) + (*prev_res)->sibling = new_res; + *old_res = new_res; + break; + } + + prev_res = old_res; + old_res = &(*old_res)->sibling; + + } while (1); return AE_OK; } +static int vmbus_acpi_remove(struct acpi_device *device) +{ + struct resource *cur_res; + struct resource *next_res; + + if (hyperv_mmio) { + for (cur_res = hyperv_mmio; cur_res; cur_res = next_res) { + next_res = cur_res->sibling; + kfree(cur_res); + } + } + + return 0; +} + static int vmbus_acpi_add(struct acpi_device *device) { acpi_status result; int ret_val = -ENODEV; + struct acpi_device *ancestor; hv_acpi_dev = device; @@ -1046,35 +1118,27 @@ static int vmbus_acpi_add(struct acpi_device *device) if (ACPI_FAILURE(result)) goto acpi_walk_err; /* - * The parent of the vmbus acpi device (Gen2 firmware) is the VMOD that - * has the mmio ranges. Get that. + * Some ancestor of the vmbus acpi device (Gen1 or Gen2 + * firmware) is the VMOD that has the mmio ranges. Get that. */ - if (device->parent) { - result = acpi_walk_resources(device->parent->handle, - METHOD_NAME__CRS, - vmbus_walk_resources, NULL); + for (ancestor = device->parent; ancestor; ancestor = ancestor->parent) { + result = acpi_walk_resources(ancestor->handle, METHOD_NAME__CRS, + vmbus_walk_resources, NULL); if (ACPI_FAILURE(result)) - goto acpi_walk_err; - if (hyperv_mmio.start && hyperv_mmio.end) - request_resource(&iomem_resource, &hyperv_mmio); + continue; + if (hyperv_mmio) + break; } ret_val = 0; acpi_walk_err: complete(&probe_event); + if (ret_val) + vmbus_acpi_remove(device); return ret_val; } -static int vmbus_acpi_remove(struct acpi_device *device) -{ - int ret = 0; - - if (hyperv_mmio.start && hyperv_mmio.end) - ret = release_resource(&hyperv_mmio); - return ret; -} - static const struct acpi_device_id vmbus_acpi_device_ids[] = { {"VMBUS", 0}, {"VMBus", 0}, diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index 807ee22..b54ee1c 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -688,7 +688,7 @@ static int hvfb_getmem(struct fb_info *info) par->mem.name = KBUILD_MODNAME; par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (gen2vm) { - ret = allocate_resource(&hyperv_mmio, &par->mem, + ret = allocate_resource(hyperv_mmio, &par->mem, screen_fb_size, 0, -1, screen_fb_size, diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 30d3a1f..217e14b 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1233,7 +1233,7 @@ extern bool vmbus_prep_negotiate_resp(struct icmsg_hdr *, void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid); -extern struct resource hyperv_mmio; +extern struct resource *hyperv_mmio; /* * Negotiated version with the Host. -- cgit v1.1 From 3546448338e76a52d4f86eb3680cb2934e22d89b Mon Sep 17 00:00:00 2001 From: Jake Oshins Date: Wed, 5 Aug 2015 00:52:37 -0700 Subject: drivers:hv: Move MMIO range picking from hyper_fb to hv_vmbus This patch deletes the logic from hyperv_fb which picked a range of MMIO space for the frame buffer and adds new logic to hv_vmbus which picks ranges for child drivers. The new logic isn't quite the same as the old, as it considers more possible ranges. Signed-off-by: Jake Oshins Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 88 +++++++++++++++++++++++++++++++++++++++-- drivers/video/fbdev/hyperv_fb.c | 46 ++++++++++----------- include/linux/hyperv.h | 7 +++- 3 files changed, 110 insertions(+), 31 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index ee59e06..8c3eaee 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "hyperv_vmbus.h" @@ -103,7 +104,6 @@ static struct notifier_block hyperv_panic_block = { }; struct resource *hyperv_mmio; -EXPORT_SYMBOL_GPL(hyperv_mmio); static int vmbus_exists(void) { @@ -891,8 +891,8 @@ err_cleanup: } /** - * __vmbus_child_driver_register - Register a vmbus's driver - * @drv: Pointer to driver structure you want to register + * __vmbus_child_driver_register() - Register a vmbus's driver + * @hv_driver: Pointer to driver structure you want to register * @owner: owner module of the drv * @mod_name: module name string * @@ -924,7 +924,8 @@ EXPORT_SYMBOL_GPL(__vmbus_driver_register); /** * vmbus_driver_unregister() - Unregister a vmbus's driver - * @drv: Pointer to driver structure you want to un-register + * @hv_driver: Pointer to driver structure you want to + * un-register * * Un-register the given driver that was previous registered with a call to * vmbus_driver_register() @@ -1104,6 +1105,85 @@ static int vmbus_acpi_remove(struct acpi_device *device) return 0; } +/** + * vmbus_allocate_mmio() - Pick a memory-mapped I/O range. + * @new: If successful, supplied a pointer to the + * allocated MMIO space. + * @device_obj: Identifies the caller + * @min: Minimum guest physical address of the + * allocation + * @max: Maximum guest physical address + * @size: Size of the range to be allocated + * @align: Alignment of the range to be allocated + * @fb_overlap_ok: Whether this allocation can be allowed + * to overlap the video frame buffer. + * + * This function walks the resources granted to VMBus by the + * _CRS object in the ACPI namespace underneath the parent + * "bridge" whether that's a root PCI bus in the Generation 1 + * case or a Module Device in the Generation 2 case. It then + * attempts to allocate from the global MMIO pool in a way that + * matches the constraints supplied in these parameters and by + * that _CRS. + * + * Return: 0 on success, -errno on failure + */ +int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, + resource_size_t min, resource_size_t max, + resource_size_t size, resource_size_t align, + bool fb_overlap_ok) +{ + struct resource *iter; + resource_size_t range_min, range_max, start, local_min, local_max; + const char *dev_n = dev_name(&device_obj->device); + u32 fb_end = screen_info.lfb_base + (screen_info.lfb_size << 1); + int i; + + for (iter = hyperv_mmio; iter; iter = iter->sibling) { + if ((iter->start >= max) || (iter->end <= min)) + continue; + + range_min = iter->start; + range_max = iter->end; + + /* If this range overlaps the frame buffer, split it into + two tries. */ + for (i = 0; i < 2; i++) { + local_min = range_min; + local_max = range_max; + if (fb_overlap_ok || (range_min >= fb_end) || + (range_max <= screen_info.lfb_base)) { + i++; + } else { + if ((range_min <= screen_info.lfb_base) && + (range_max >= screen_info.lfb_base)) { + /* + * The frame buffer is in this window, + * so trim this into the part that + * preceeds the frame buffer. + */ + local_max = screen_info.lfb_base - 1; + range_min = fb_end; + } else { + range_min = fb_end; + continue; + } + } + + start = (local_min + align - 1) & ~(align - 1); + for (; start + size - 1 <= local_max; start += align) { + *new = request_mem_region_exclusive(start, size, + dev_n); + if (*new) + return 0; + } + } + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(vmbus_allocate_mmio); + static int vmbus_acpi_add(struct acpi_device *device) { acpi_status result; diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index b54ee1c..e2451bd 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -213,7 +213,7 @@ struct synthvid_msg { struct hvfb_par { struct fb_info *info; - struct resource mem; + struct resource *mem; bool fb_ready; /* fb device is ready */ struct completion wait; u32 synthvid_version; @@ -677,26 +677,18 @@ static void hvfb_get_option(struct fb_info *info) /* Get framebuffer memory from Hyper-V video pci space */ -static int hvfb_getmem(struct fb_info *info) +static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info) { struct hvfb_par *par = info->par; struct pci_dev *pdev = NULL; void __iomem *fb_virt; int gen2vm = efi_enabled(EFI_BOOT); + resource_size_t pot_start, pot_end; int ret; - par->mem.name = KBUILD_MODNAME; - par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (gen2vm) { - ret = allocate_resource(hyperv_mmio, &par->mem, - screen_fb_size, - 0, -1, - screen_fb_size, - NULL, NULL); - if (ret != 0) { - pr_err("Unable to allocate framebuffer memory\n"); - return -ENODEV; - } + pot_start = 0; + pot_end = -1; } else { pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT, PCI_DEVICE_ID_HYPERV_VIDEO, NULL); @@ -709,16 +701,18 @@ static int hvfb_getmem(struct fb_info *info) pci_resource_len(pdev, 0) < screen_fb_size) goto err1; - par->mem.end = pci_resource_end(pdev, 0); - par->mem.start = par->mem.end - screen_fb_size + 1; - ret = request_resource(&pdev->resource[0], &par->mem); - if (ret != 0) { - pr_err("Unable to request framebuffer memory\n"); - goto err1; - } + pot_end = pci_resource_end(pdev, 0); + pot_start = pot_end - screen_fb_size + 1; + } + + ret = vmbus_allocate_mmio(&par->mem, hdev, pot_start, pot_end, + screen_fb_size, 0x100000, true); + if (ret != 0) { + pr_err("Unable to allocate framebuffer memory\n"); + goto err1; } - fb_virt = ioremap(par->mem.start, screen_fb_size); + fb_virt = ioremap(par->mem->start, screen_fb_size); if (!fb_virt) goto err2; @@ -736,7 +730,7 @@ static int hvfb_getmem(struct fb_info *info) info->apertures->ranges[0].size = pci_resource_len(pdev, 0); } - info->fix.smem_start = par->mem.start; + info->fix.smem_start = par->mem->start; info->fix.smem_len = screen_fb_size; info->screen_base = fb_virt; info->screen_size = screen_fb_size; @@ -749,7 +743,8 @@ static int hvfb_getmem(struct fb_info *info) err3: iounmap(fb_virt); err2: - release_resource(&par->mem); + release_mem_region(par->mem->start, screen_fb_size); + par->mem = NULL; err1: if (!gen2vm) pci_dev_put(pdev); @@ -763,7 +758,8 @@ static void hvfb_putmem(struct fb_info *info) struct hvfb_par *par = info->par; iounmap(info->screen_base); - release_resource(&par->mem); + release_mem_region(par->mem->start, screen_fb_size); + par->mem = NULL; } @@ -794,7 +790,7 @@ static int hvfb_probe(struct hv_device *hdev, goto error1; } - ret = hvfb_getmem(info); + ret = hvfb_getmem(hdev, info); if (ret) { pr_err("No memory for framebuffer\n"); goto error2; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 217e14b..54733d5 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -977,6 +977,11 @@ int __must_check __vmbus_driver_register(struct hv_driver *hv_driver, const char *mod_name); void vmbus_driver_unregister(struct hv_driver *hv_driver); +int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, + resource_size_t min, resource_size_t max, + resource_size_t size, resource_size_t align, + bool fb_overlap_ok); + /** * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device * @@ -1233,8 +1238,6 @@ extern bool vmbus_prep_negotiate_resp(struct icmsg_hdr *, void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid); -extern struct resource *hyperv_mmio; - /* * Negotiated version with the Host. */ -- cgit v1.1 From 9f01ec53458d9e9b68f1c555e773b5d1a1f66e94 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Wed, 5 Aug 2015 00:52:38 -0700 Subject: Drivers: hv: vmbus: Improve the CPU affiliation for channels The current code tracks the assigned CPUs within a NUMA node in the context of the primary channel. So, if we have a VM with a single NUMA node with 8 VCPUs, we may end up unevenly distributing the channel load. Fix the issue by tracking affiliations globally. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 11 ++++++----- drivers/hv/hv.c | 9 +++++++++ drivers/hv/hyperv_vmbus.h | 5 +++++ include/linux/hyperv.h | 1 - 4 files changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 30613df..39c5afc 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -392,6 +392,7 @@ static void init_vp_index(struct vmbus_channel *channel, const uuid_le *type_gui struct vmbus_channel *primary = channel->primary_channel; int next_node; struct cpumask available_mask; + struct cpumask *alloced_mask; for (i = IDE; i < MAX_PERF_CHN; i++) { if (!memcmp(type_guid->b, hp_devs[i].guid, @@ -409,7 +410,6 @@ static void init_vp_index(struct vmbus_channel *channel, const uuid_le *type_gui * channel, bind it to cpu 0. */ channel->numa_node = 0; - cpumask_set_cpu(0, &channel->alloced_cpus_in_node); channel->target_cpu = 0; channel->target_vp = hv_context.vp_index[0]; return; @@ -434,21 +434,22 @@ static void init_vp_index(struct vmbus_channel *channel, const uuid_le *type_gui channel->numa_node = next_node; primary = channel; } + alloced_mask = &hv_context.hv_numa_map[primary->numa_node]; - if (cpumask_weight(&primary->alloced_cpus_in_node) == + if (cpumask_weight(alloced_mask) == cpumask_weight(cpumask_of_node(primary->numa_node))) { /* * We have cycled through all the CPUs in the node; * reset the alloced map. */ - cpumask_clear(&primary->alloced_cpus_in_node); + cpumask_clear(alloced_mask); } - cpumask_xor(&available_mask, &primary->alloced_cpus_in_node, + cpumask_xor(&available_mask, alloced_mask, cpumask_of_node(primary->numa_node)); cur_cpu = cpumask_next(-1, &available_mask); - cpumask_set_cpu(cur_cpu, &primary->alloced_cpus_in_node); + cpumask_set_cpu(cur_cpu, alloced_mask); channel->target_cpu = cur_cpu; channel->target_vp = hv_context.vp_index[cur_cpu]; diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index 41d8072..fd93cfd 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -332,6 +332,13 @@ int hv_synic_alloc(void) size_t ced_size = sizeof(struct clock_event_device); int cpu; + hv_context.hv_numa_map = kzalloc(sizeof(struct cpumask) * nr_node_ids, + GFP_ATOMIC); + if (hv_context.hv_numa_map == NULL) { + pr_err("Unable to allocate NUMA map\n"); + goto err; + } + for_each_online_cpu(cpu) { hv_context.event_dpc[cpu] = kmalloc(size, GFP_ATOMIC); if (hv_context.event_dpc[cpu] == NULL) { @@ -345,6 +352,7 @@ int hv_synic_alloc(void) pr_err("Unable to allocate clock event device\n"); goto err; } + hv_init_clockevent_device(hv_context.clk_evt[cpu], cpu); hv_context.synic_message_page[cpu] = @@ -393,6 +401,7 @@ void hv_synic_free(void) { int cpu; + kfree(hv_context.hv_numa_map); for_each_online_cpu(cpu) hv_synic_free_cpu(cpu); } diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index 6383707..6f25825 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -551,6 +551,11 @@ struct hv_context { * Support PV clockevent device. */ struct clock_event_device *clk_evt[NR_CPUS]; + /* + * To manage allocations in a NUMA node. + * Array indexed by numa node ID. + */ + struct cpumask *hv_numa_map; }; extern struct hv_context hv_context; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 54733d5..5a3df5a 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -699,7 +699,6 @@ struct vmbus_channel { /* * State to manage the CPU affiliation of channels. */ - struct cpumask alloced_cpus_in_node; int numa_node; /* * Support for sub-channels. For high performance devices, -- cgit v1.1 From 3b71107d73b16074afa7658f3f0fcf837aabfe24 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 5 Aug 2015 00:52:39 -0700 Subject: Drivers: hv: vmbus: Further improve CPU affiliation logic Keep track of CPU affiliations of sub-channels within the scope of the primary channel. This will allow us to better distribute the load amongst available CPUs. Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 20 ++++++++++++++++++-- include/linux/hyperv.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 39c5afc..2f9aead 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -448,8 +448,24 @@ static void init_vp_index(struct vmbus_channel *channel, const uuid_le *type_gui cpumask_xor(&available_mask, alloced_mask, cpumask_of_node(primary->numa_node)); - cur_cpu = cpumask_next(-1, &available_mask); - cpumask_set_cpu(cur_cpu, alloced_mask); + cur_cpu = -1; + while (true) { + cur_cpu = cpumask_next(cur_cpu, &available_mask); + if (cur_cpu >= nr_cpu_ids) { + cur_cpu = -1; + cpumask_copy(&available_mask, + cpumask_of_node(primary->numa_node)); + continue; + } + + if (!cpumask_test_cpu(cur_cpu, + &primary->alloced_cpus_in_node)) { + cpumask_set_cpu(cur_cpu, + &primary->alloced_cpus_in_node); + cpumask_set_cpu(cur_cpu, alloced_mask); + break; + } + } channel->target_cpu = cur_cpu; channel->target_vp = hv_context.vp_index[cur_cpu]; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 5a3df5a..54733d5 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -699,6 +699,7 @@ struct vmbus_channel { /* * State to manage the CPU affiliation of channels. */ + struct cpumask alloced_cpus_in_node; int numa_node; /* * Support for sub-channels. For high performance devices, -- cgit v1.1 From a5cca686ce0ef4909deaee4ed46dd991e3a9ece4 Mon Sep 17 00:00:00 2001 From: Christopher Oo Date: Wed, 5 Aug 2015 00:52:40 -0700 Subject: Drivers: hv_vmbus: Fix signal to host condition Fixes a bug where previously hv_ringbuffer_read would pass in the old number of bytes available to read instead of the expected old read index when calculating when to signal to the host that the ringbuffer is empty. Since the previous write size is already saved, also changes the hv_need_to_signal_on_read to use the previously read value rather than recalculating it. Signed-off-by: Christopher Oo Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/ring_buffer.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 6361d12..70a1a9a 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -103,10 +103,9 @@ static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi) * there is room for the producer to send the pending packet. */ -static bool hv_need_to_signal_on_read(u32 old_rd, - struct hv_ring_buffer_info *rbi) +static bool hv_need_to_signal_on_read(u32 prev_write_sz, + struct hv_ring_buffer_info *rbi) { - u32 prev_write_sz; u32 cur_write_sz; u32 r_size; u32 write_loc = rbi->ring_buffer->write_index; @@ -123,10 +122,6 @@ static bool hv_need_to_signal_on_read(u32 old_rd, cur_write_sz = write_loc >= read_loc ? r_size - (write_loc - read_loc) : read_loc - write_loc; - prev_write_sz = write_loc >= old_rd ? r_size - (write_loc - old_rd) : - old_rd - write_loc; - - if ((prev_write_sz < pending_sz) && (cur_write_sz >= pending_sz)) return true; @@ -517,7 +512,6 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, u32 next_read_location = 0; u64 prev_indices = 0; unsigned long flags; - u32 old_read; if (buflen <= 0) return -EINVAL; @@ -528,8 +522,6 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, &bytes_avail_toread, &bytes_avail_towrite); - old_read = bytes_avail_toread; - /* Make sure there is something to read */ if (bytes_avail_toread < buflen) { spin_unlock_irqrestore(&inring_info->ring_lock, flags); @@ -560,7 +552,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, spin_unlock_irqrestore(&inring_info->ring_lock, flags); - *signal = hv_need_to_signal_on_read(old_read, inring_info); + *signal = hv_need_to_signal_on_read(bytes_avail_towrite, inring_info); return 0; } -- cgit v1.1 From bc609cb47fb2e74654e23cef0a1d4db38b6570a3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 5 Aug 2015 00:52:41 -0700 Subject: drivers/hv: Migrate to new 'set-state' interface Migrate hv driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: devel@linuxdriverproject.org Signed-off-by: Viresh Kumar Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv.c | 45 +++++++++++++++++++-------------------------- 1 file changed, 19 insertions(+), 26 deletions(-) diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index fd93cfd..c641faf 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -274,7 +274,7 @@ static int hv_ce_set_next_event(unsigned long delta, { cycle_t current_tick; - WARN_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT); + WARN_ON(!clockevent_state_oneshot(evt)); rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick); current_tick += delta; @@ -282,31 +282,24 @@ static int hv_ce_set_next_event(unsigned long delta, return 0; } -static void hv_ce_setmode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int hv_ce_shutdown(struct clock_event_device *evt) +{ + wrmsrl(HV_X64_MSR_STIMER0_COUNT, 0); + wrmsrl(HV_X64_MSR_STIMER0_CONFIG, 0); + + return 0; +} + +static int hv_ce_set_oneshot(struct clock_event_device *evt) { union hv_timer_config timer_cfg; - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* unsupported */ - break; - - case CLOCK_EVT_MODE_ONESHOT: - timer_cfg.enable = 1; - timer_cfg.auto_enable = 1; - timer_cfg.sintx = VMBUS_MESSAGE_SINT; - wrmsrl(HV_X64_MSR_STIMER0_CONFIG, timer_cfg.as_uint64); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - wrmsrl(HV_X64_MSR_STIMER0_COUNT, 0); - wrmsrl(HV_X64_MSR_STIMER0_CONFIG, 0); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } + timer_cfg.enable = 1; + timer_cfg.auto_enable = 1; + timer_cfg.sintx = VMBUS_MESSAGE_SINT; + wrmsrl(HV_X64_MSR_STIMER0_CONFIG, timer_cfg.as_uint64); + + return 0; } static void hv_init_clockevent_device(struct clock_event_device *dev, int cpu) @@ -321,7 +314,8 @@ static void hv_init_clockevent_device(struct clock_event_device *dev, int cpu) * references to the hv_vmbus module making it impossible to unload. */ - dev->set_mode = hv_ce_setmode; + dev->set_state_shutdown = hv_ce_shutdown; + dev->set_state_oneshot = hv_ce_set_oneshot; dev->set_next_event = hv_ce_set_next_event; } @@ -515,8 +509,7 @@ void hv_synic_cleanup(void *arg) /* Turn off clockevent device */ if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE) - hv_ce_setmode(CLOCK_EVT_MODE_SHUTDOWN, - hv_context.clk_evt[cpu]); + hv_ce_shutdown(hv_context.clk_evt[cpu]); rdmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, shared_sint.as_uint64); -- cgit v1.1 From ca9357bd26c2f8e7b909321eedd651f52cc30d04 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Wed, 5 Aug 2015 00:52:42 -0700 Subject: Drivers: hv: vmbus: Implement a clocksource based on the TSC page The current Hyper-V clock source is based on the per-partition reference counter and this counter is being accessed via s synthetic MSR - HV_X64_MSR_TIME_REF_COUNT. Hyper-V has a more efficient way of computing the per-partition reference counter value that does not involve reading a synthetic MSR. We implement a time source based on this mechanism. Tested-by: Vivek Yadav Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/uapi/asm/hyperv.h | 2 + drivers/hv/hv.c | 83 ++++++++++++++++++++++++++++++++++++++ drivers/hv/hyperv_vmbus.h | 9 +++++ 3 files changed, 94 insertions(+) diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h index f36d56b..f0412c5 100644 --- a/arch/x86/include/uapi/asm/hyperv.h +++ b/arch/x86/include/uapi/asm/hyperv.h @@ -27,6 +27,8 @@ #define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0) /* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/ #define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1) +/* Partition reference TSC MSR is available */ +#define HV_X64_MSR_REFERENCE_TSC_AVAILABLE (1 << 9) /* A partition's reference time stamp counter (TSC) page */ #define HV_X64_MSR_REFERENCE_TSC 0x40000021 diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index c641faf..6341be8 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -133,6 +133,56 @@ static u64 do_hypercall(u64 control, void *input, void *output) #endif /* !x86_64 */ } +#ifdef CONFIG_X86_64 +static cycle_t read_hv_clock_tsc(struct clocksource *arg) +{ + cycle_t current_tick; + struct ms_hyperv_tsc_page *tsc_pg = hv_context.tsc_page; + + if (tsc_pg->tsc_sequence != -1) { + /* + * Use the tsc page to compute the value. + */ + + while (1) { + cycle_t tmp; + u32 sequence = tsc_pg->tsc_sequence; + u64 cur_tsc; + u64 scale = tsc_pg->tsc_scale; + s64 offset = tsc_pg->tsc_offset; + + rdtscll(cur_tsc); + /* current_tick = ((cur_tsc *scale) >> 64) + offset */ + asm("mulq %3" + : "=d" (current_tick), "=a" (tmp) + : "a" (cur_tsc), "r" (scale)); + + current_tick += offset; + if (tsc_pg->tsc_sequence == sequence) + return current_tick; + + if (tsc_pg->tsc_sequence != -1) + continue; + /* + * Fallback using MSR method. + */ + break; + } + } + rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick); + return current_tick; +} + +static struct clocksource hyperv_cs_tsc = { + .name = "hyperv_clocksource_tsc_page", + .rating = 425, + .read = read_hv_clock_tsc, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; +#endif + + /* * hv_init - Main initialization routine. * @@ -142,7 +192,9 @@ int hv_init(void) { int max_leaf; union hv_x64_msr_hypercall_contents hypercall_msr; + union hv_x64_msr_hypercall_contents tsc_msr; void *virtaddr = NULL; + void *va_tsc = NULL; memset(hv_context.synic_event_page, 0, sizeof(void *) * NR_CPUS); memset(hv_context.synic_message_page, 0, @@ -186,6 +238,22 @@ int hv_init(void) hv_context.hypercall_page = virtaddr; +#ifdef CONFIG_X86_64 + if (ms_hyperv.features & HV_X64_MSR_REFERENCE_TSC_AVAILABLE) { + va_tsc = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL); + if (!va_tsc) + goto cleanup; + hv_context.tsc_page = va_tsc; + + rdmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64); + + tsc_msr.enable = 1; + tsc_msr.guest_physical_address = vmalloc_to_pfn(va_tsc); + + wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64); + clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100); + } +#endif return 0; cleanup: @@ -219,6 +287,21 @@ void hv_cleanup(void) vfree(hv_context.hypercall_page); hv_context.hypercall_page = NULL; } + +#ifdef CONFIG_X86_64 + /* + * Cleanup the TSC page based CS. + */ + if (ms_hyperv.features & HV_X64_MSR_REFERENCE_TSC_AVAILABLE) { + clocksource_change_rating(&hyperv_cs_tsc, 10); + clocksource_unregister(&hyperv_cs_tsc); + + hypercall_msr.as_uint64 = 0; + wrmsrl(HV_X64_MSR_REFERENCE_TSC, hypercall_msr.as_uint64); + vfree(hv_context.tsc_page); + hv_context.tsc_page = NULL; + } +#endif } /* diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index 6f25825..3d70e36 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -517,6 +517,7 @@ struct hv_context { u64 guestid; void *hypercall_page; + void *tsc_page; bool synic_initialized; @@ -560,6 +561,14 @@ struct hv_context { extern struct hv_context hv_context; +struct ms_hyperv_tsc_page { + volatile u32 tsc_sequence; + u32 reserved1; + volatile u64 tsc_scale; + volatile s64 tsc_offset; + u64 reserved2[509]; +}; + struct hv_ring_buffer_debug_info { u32 current_interrupt_mask; u32 current_read_index; -- cgit v1.1 From 042ab0313bbb7e776e9510da3f07fb300d08a8ba Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 5 Aug 2015 00:52:43 -0700 Subject: Drivers: hv: vmbus: add a sysfs attr to show the binding of channel/VP This is useful to analyze performance issue. Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 8c3eaee..45d6d7a 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -441,6 +441,43 @@ static ssize_t in_write_bytes_avail_show(struct device *dev, } static DEVICE_ATTR_RO(in_write_bytes_avail); +static ssize_t channel_vp_mapping_show(struct device *dev, + struct device_attribute *dev_attr, + char *buf) +{ + struct hv_device *hv_dev = device_to_hv_device(dev); + struct vmbus_channel *channel = hv_dev->channel, *cur_sc; + unsigned long flags; + int buf_size = PAGE_SIZE, n_written, tot_written; + struct list_head *cur; + + if (!channel) + return -ENODEV; + + tot_written = snprintf(buf, buf_size, "%u:%u\n", + channel->offermsg.child_relid, channel->target_cpu); + + spin_lock_irqsave(&channel->lock, flags); + + list_for_each(cur, &channel->sc_list) { + if (tot_written >= buf_size - 1) + break; + + cur_sc = list_entry(cur, struct vmbus_channel, sc_list); + n_written = scnprintf(buf + tot_written, + buf_size - tot_written, + "%u:%u\n", + cur_sc->offermsg.child_relid, + cur_sc->target_cpu); + tot_written += n_written; + } + + spin_unlock_irqrestore(&channel->lock, flags); + + return tot_written; +} +static DEVICE_ATTR_RO(channel_vp_mapping); + /* Set up per device attributes in /sys/bus/vmbus/devices/ */ static struct attribute *vmbus_attrs[] = { &dev_attr_id.attr, @@ -465,6 +502,7 @@ static struct attribute *vmbus_attrs[] = { &dev_attr_in_write_index.attr, &dev_attr_in_read_bytes_avail.attr, &dev_attr_in_write_bytes_avail.attr, + &dev_attr_channel_vp_mapping.attr, NULL, }; ATTRIBUTE_GROUPS(vmbus); -- cgit v1.1 From 502d84bd1aa2445b13ff75e8ac2a39d249f791ee Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 5 Aug 2015 00:52:44 -0700 Subject: tools: hv: add a python script lsvmbus to list VMBus devices By default lsvmbus lists all the devices in the VMBus. With -v or -vv, more information is printed, including the VMBus Rel_ID, class ID, device ID and which channel is bound to which virtual processor, etc. Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- tools/hv/lsvmbus | 101 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 tools/hv/lsvmbus diff --git a/tools/hv/lsvmbus b/tools/hv/lsvmbus new file mode 100644 index 0000000..162a378 --- /dev/null +++ b/tools/hv/lsvmbus @@ -0,0 +1,101 @@ +#!/usr/bin/env python + +import os +from optparse import OptionParser + +parser = OptionParser() +parser.add_option("-v", "--verbose", dest="verbose", + help="print verbose messages. Try -vv, -vvv for \ + more verbose messages", action="count") + +(options, args) = parser.parse_args() + +verbose = 0 +if options.verbose is not None: + verbose = options.verbose + +vmbus_sys_path = '/sys/bus/vmbus/devices' +if not os.path.isdir(vmbus_sys_path): + print "%s doesn't exist: exiting..." % vmbus_sys_path + exit(-1) + +vmbus_dev_dict = { + '{0e0b6031-5213-4934-818b-38d90ced39db}' : '[Operating system shutdown]', + '{9527e630-d0ae-497b-adce-e80ab0175caf}' : '[Time Synchronization]', + '{57164f39-9115-4e78-ab55-382f3bd5422d}' : '[Heartbeat]', + '{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}' : '[Data Exchange]', + '{35fa2e29-ea23-4236-96ae-3a6ebacba440}' : '[Backup (volume checkpoint)]', + '{34d14be3-dee4-41c8-9ae7-6b174977c192}' : '[Guest services]', + '{525074dc-8985-46e2-8057-a307dc18a502}' : '[Dynamic Memory]', + '{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}' : 'Synthetic mouse', + '{f912ad6d-2b17-48ea-bd65-f927a61c7684}' : 'Synthetic keyboard', + '{da0a7802-e377-4aac-8e77-0558eb1073f8}' : 'Synthetic framebuffer adapter', + '{f8615163-df3e-46c5-913f-f2d2f965ed0e}' : 'Synthetic network adapter', + '{32412632-86cb-44a2-9b5c-50d1417354f5}' : 'Synthetic IDE Controller', + '{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}' : 'Synthetic SCSI Controller', + '{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}' : 'Synthetic fiber channel adapter', + '{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}' : 'Synthetic RDMA adapter', + '{276aacf4-ac15-426c-98dd-7521ad3f01fe}' : '[Reserved system device]', + '{f8e65716-3cb3-4a06-9a60-1889c5cccab5}' : '[Reserved system device]', + '{3375baf4-9e15-4b30-b765-67acb10d607b}' : '[Reserved system device]', +} + +def get_vmbus_dev_attr(dev_name, attr): + try: + f = open('%s/%s/%s' % (vmbus_sys_path, dev_name, attr), 'r') + lines = f.readlines() + f.close() + except IOError: + lines = [] + + return lines + +class VMBus_Dev: + pass + + +vmbus_dev_list = [] + +for f in os.listdir(vmbus_sys_path): + vmbus_id = get_vmbus_dev_attr(f, 'id')[0].strip() + class_id = get_vmbus_dev_attr(f, 'class_id')[0].strip() + device_id = get_vmbus_dev_attr(f, 'device_id')[0].strip() + dev_desc = vmbus_dev_dict.get(class_id, 'Unknown') + + chn_vp_mapping = get_vmbus_dev_attr(f, 'channel_vp_mapping') + chn_vp_mapping = [c.strip() for c in chn_vp_mapping] + chn_vp_mapping = sorted(chn_vp_mapping, + key = lambda c : int(c.split(':')[0])) + + chn_vp_mapping = ['\tRel_ID=%s, target_cpu=%s' % + (c.split(':')[0], c.split(':')[1]) + for c in chn_vp_mapping] + d = VMBus_Dev() + d.sysfs_path = '%s/%s' % (vmbus_sys_path, f) + d.vmbus_id = vmbus_id + d.class_id = class_id + d.device_id = device_id + d.dev_desc = dev_desc + d.chn_vp_mapping = '\n'.join(chn_vp_mapping) + if d.chn_vp_mapping: + d.chn_vp_mapping += '\n' + + vmbus_dev_list.append(d) + + +vmbus_dev_list = sorted(vmbus_dev_list, key = lambda d : int(d.vmbus_id)) + +format0 = '%2s: %s' +format1 = '%2s: Class_ID = %s - %s\n%s' +format2 = '%2s: Class_ID = %s - %s\n\tDevice_ID = %s\n\tSysfs path: %s\n%s' + +for d in vmbus_dev_list: + if verbose == 0: + print ('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc) + elif verbose == 1: + print ('VMBUS ID ' + format1) % \ + (d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping) + else: + print ('VMBUS ID ' + format2) % \ + (d.vmbus_id, d.class_id, d.dev_desc, \ + d.device_id, d.sysfs_path, d.chn_vp_mapping) -- cgit v1.1 From 54bf725e5d21022b25fe0d3c103fe82ed13b870b Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 5 Aug 2015 00:52:45 -0700 Subject: Drivers: hv: vmbus: document the VMBus sysfs files The 4 sysfs files should be stable ABIs to the user space. Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/stable/sysfs-bus-vmbus | 29 +++++++++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 30 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-bus-vmbus diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus new file mode 100644 index 0000000..636e938 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -0,0 +1,29 @@ +What: /sys/bus/vmbus/devices/vmbus_*/id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan +Description: The VMBus child_relid of the device's primary channel +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/class_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan +Description: The VMBus interface type GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/device_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan +Description: The VMBus interface instance GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping +Date: Jul 2015 +KernelVersion: 4.2.0 +Contact: K. Y. Srinivasan +Description: The mapping of which primary/sub channels are bound to which + Virtual Processors. + Format: +Users: tools/hv/lsvmbus diff --git a/MAINTAINERS b/MAINTAINERS index 9289ecb..cde3ece 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4957,6 +4957,7 @@ F: drivers/scsi/storvsc_drv.c F: drivers/video/fbdev/hyperv_fb.c F: include/linux/hyperv.h F: tools/hv/ +F: Documentation/ABI/stable/sysfs-bus-vmbus I2C OVER PARALLEL PORT M: Jean Delvare -- cgit v1.1 From 89af7ba5740b5937d10c8de93e79e71e5a933041 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 5 Aug 2015 00:52:46 -0700 Subject: cpu-hotplug: convert cpu_hotplug_disabled to a counter As a prerequisite to exporting cpu_hotplug_enable/cpu_hotplug_disable functions to modules we need to convert cpu_hotplug_disabled to a counter to properly support disable -> disable -> enable call sequences. E.g. after Hyper-V vmbus module (which is supposed to be the first user of exported cpu_hotplug_enable/cpu_hotplug_disable) did cpu_hotplug_disable() hibernate path calls disable_nonboot_cpus() and if we hit an error in _cpu_down() enable_nonboot_cpus() will be called on the failure path (thus making cpu_hotplug_disabled = 0 and leaving cpu hotplug in 'enabled' state). Same problem is possible if more than 1 module use cpu_hotplug_disable/cpu_hotplug_enable on their load/unload paths. When one of these modules is been unloaded it is logical to leave cpu hotplug in 'disabled' state. To support the change we need to increse cpu_hotplug_disabled counter in disable_nonboot_cpus() unconditionally as all users of disable_nonboot_cpus() are supposed to do enable_nonboot_cpus() in case an error was returned. Signed-off-by: Vitaly Kuznetsov Reviewed-by: Thomas Gleixner Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- Documentation/power/suspend-and-cpuhotplug.txt | 6 +++--- kernel/cpu.c | 21 +++++++++++++-------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index 2850df3..2fc9095 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -72,7 +72,7 @@ More details follow: | v Disable regular cpu hotplug - by setting cpu_hotplug_disabled=1 + by increasing cpu_hotplug_disabled | v Release cpu_add_remove_lock @@ -89,7 +89,7 @@ Resuming back is likewise, with the counterparts being (in the order of execution during resume): * enable_nonboot_cpus() which involves: | Acquire cpu_add_remove_lock - | Reset cpu_hotplug_disabled to 0, thereby enabling regular cpu hotplug + | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug | Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop] | Release cpu_add_remove_lock v @@ -120,7 +120,7 @@ after the entire cycle is complete (i.e., suspend + resume). Acquire cpu_add_remove_lock | v - If cpu_hotplug_disabled is 1 + If cpu_hotplug_disabled > 0 return gracefully | | diff --git a/kernel/cpu.c b/kernel/cpu.c index 5644ec5..0fca2ba 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -191,14 +191,14 @@ void cpu_hotplug_done(void) void cpu_hotplug_disable(void) { cpu_maps_update_begin(); - cpu_hotplug_disabled = 1; + cpu_hotplug_disabled++; cpu_maps_update_done(); } void cpu_hotplug_enable(void) { cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; + WARN_ON(--cpu_hotplug_disabled < 0); cpu_maps_update_done(); } @@ -608,13 +608,18 @@ int disable_nonboot_cpus(void) } } - if (!error) { + if (!error) BUG_ON(num_online_cpus() > 1); - /* Make sure the CPUs won't be enabled by someone else */ - cpu_hotplug_disabled = 1; - } else { + else pr_err("Non-boot CPUs are not disabled\n"); - } + + /* + * Make sure the CPUs won't be enabled by someone else. We need to do + * this even in case of failure as all disable_nonboot_cpus() users are + * supposed to do enable_nonboot_cpus() on the failure path. + */ + cpu_hotplug_disabled++; + cpu_maps_update_done(); return error; } @@ -633,7 +638,7 @@ void __ref enable_nonboot_cpus(void) /* Allow everyone to use the CPU hotplug again */ cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; + WARN_ON(--cpu_hotplug_disabled < 0); if (cpumask_empty(frozen_cpus)) goto out; -- cgit v1.1 From 32145c4677d2c46b9d877a33ae82c6fcacd002f9 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 5 Aug 2015 00:52:47 -0700 Subject: cpu-hotplug: export cpu_hotplug_enable/cpu_hotplug_disable Hyper-V module needs to disable cpu hotplug (offlining) as there is no support from hypervisor side to reassign already opened event channels to a different CPU. Currently it is been done by altering smp_ops.cpu_disable but it is hackish. Signed-off-by: Vitaly Kuznetsov Reviewed-by: Thomas Gleixner Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- kernel/cpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 0fca2ba..718ea76 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -194,6 +194,7 @@ void cpu_hotplug_disable(void) cpu_hotplug_disabled++; cpu_maps_update_done(); } +EXPORT_SYMBOL_GPL(cpu_hotplug_disable); void cpu_hotplug_enable(void) { @@ -201,7 +202,7 @@ void cpu_hotplug_enable(void) WARN_ON(--cpu_hotplug_disabled < 0); cpu_maps_update_done(); } - +EXPORT_SYMBOL_GPL(cpu_hotplug_enable); #endif /* CONFIG_HOTPLUG_CPU */ /* Need to know about CPUs going up/down? */ -- cgit v1.1 From f39c4280a3872b0e6c7b01076132c12ad7a90392 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 5 Aug 2015 00:52:48 -0700 Subject: Drivers: hv: vmbus: use cpu_hotplug_enable/disable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e513229b4c38 ("Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors") was altering smp_ops.cpu_disable to prevent CPU offlining. We can bo better by using cpu_hotplug_enable/disable functions instead of such hard-coding. Reported-by: Radim Kr.má Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 38 ++++---------------------------------- 1 file changed, 4 insertions(+), 34 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 45d6d7a..f19b6f7 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -828,38 +828,6 @@ static void vmbus_isr(void) } } -#ifdef CONFIG_HOTPLUG_CPU -static int hyperv_cpu_disable(void) -{ - return -ENOSYS; -} - -static void hv_cpu_hotplug_quirk(bool vmbus_loaded) -{ - static void *previous_cpu_disable; - - /* - * Offlining a CPU when running on newer hypervisors (WS2012R2, Win8, - * ...) is not supported at this moment as channel interrupts are - * distributed across all of them. - */ - - if ((vmbus_proto_version == VERSION_WS2008) || - (vmbus_proto_version == VERSION_WIN7)) - return; - - if (vmbus_loaded) { - previous_cpu_disable = smp_ops.cpu_disable; - smp_ops.cpu_disable = hyperv_cpu_disable; - pr_notice("CPU offlining is not supported by hypervisor\n"); - } else if (previous_cpu_disable) - smp_ops.cpu_disable = previous_cpu_disable; -} -#else -static void hv_cpu_hotplug_quirk(bool vmbus_loaded) -{ -} -#endif /* * vmbus_bus_init -Main vmbus driver initialization routine. @@ -901,7 +869,8 @@ static int vmbus_bus_init(int irq) if (ret) goto err_alloc; - hv_cpu_hotplug_quirk(true); + if (vmbus_proto_version > VERSION_WIN7) + cpu_hotplug_disable(); /* * Only register if the crash MSRs are available @@ -1364,7 +1333,8 @@ static void __exit vmbus_exit(void) } hv_synic_free(); acpi_bus_unregister_driver(&vmbus_acpi_driver); - hv_cpu_hotplug_quirk(false); + if (vmbus_proto_version > VERSION_WIN7) + cpu_hotplug_enable(); } -- cgit v1.1 From 6497a8757361a88b73fc3814d2ee9b9fc105fa42 Mon Sep 17 00:00:00 2001 From: Eli Billauer Date: Wed, 5 Aug 2015 13:03:26 +0300 Subject: char: xillybus: Allow 64-bit DMA on PCIe interface Until now, only 32-bit DMA addressing was allowed, following a report on some old Intel machine that dropped 64-bit PCIe packets, even though pci_set_dma_mask() was successful with DMA_BIT_MASK(64). But then came TI's Keystone II chip (ARM Cortex A15 + DSPs), which refuses 32-bit DMA addressing (for good reasons). So 64-bit DMA is allowed as a fallback option. Signed-off-by: Eli Billauer Signed-off-by: Greg Kroah-Hartman --- drivers/char/xillybus/xillybus_pcie.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/char/xillybus/xillybus_pcie.c b/drivers/char/xillybus/xillybus_pcie.c index d8266bc..9418300 100644 --- a/drivers/char/xillybus/xillybus_pcie.c +++ b/drivers/char/xillybus/xillybus_pcie.c @@ -193,14 +193,16 @@ static int xilly_probe(struct pci_dev *pdev, } /* - * In theory, an attempt to set the DMA mask to 64 and dma_using_dac=1 - * is the right thing. But some unclever PCIe drivers report it's OK - * when the hardware drops those 64-bit PCIe packets. So trust - * nobody and use 32 bits DMA addressing in any case. + * Some (old and buggy?) hardware drops 64-bit addressed PCIe packets, + * even when the PCIe driver claims that a 64-bit mask is OK. On the + * other hand, on some architectures, 64-bit addressing is mandatory. + * So go for the 64-bit mask only when failing is the other option. */ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { endpoint->dma_using_dac = 0; + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + endpoint->dma_using_dac = 1; } else { dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n"); return -ENODEV; -- cgit v1.1 From a9fce374815d8ab94a3e6259802a944e2cc21408 Mon Sep 17 00:00:00 2001 From: Ankit Gupta Date: Mon, 22 Jun 2015 16:38:46 -0600 Subject: spmi: add command tracepoints for SPMI Add tracepoints to retrieve information about read, write and non-data commands. For performance measurement support tracepoints are added at the beginning and at the end of transfers. Following is a list showing the new tracepoint events. The "cmd" parameter here represents the opcode, SID, and full 16-bit address. spmi_write_begin: cmd and data buffer. spmi_write_end : cmd and return value. spmi_read_begin : cmd. spmi_read_end : cmd, return value and data buffer. spmi_cmd : cmd. The reason that cmd appears at both the beginning and at the end event is that SPMI drivers can request commands concurrently. cmd helps in matching the corresponding events. SPMI tracepoints can be enabled like: echo 1 >/sys/kernel/debug/tracing/events/spmi/enable and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace that look like: ... spmi_read_begin: opc=56 sid=00 addr=0x0000 ... spmi_read_end: opc=56 sid=00 addr=0x0000 ret=0 len=02 buf=0x[01-40] ... spmi_write_begin: opc=48 sid=00 addr=0x0000 len=3 buf=0x[ff-ff-ff] Suggested-by: Sagar Dharia Acked-by: Steven Rostedt Reviewed-by: Stephen Boyd Signed-off-by: Gilad Avidov Signed-off-by: Ankit Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/spmi/spmi.c | 22 +++++++- include/trace/events/spmi.h | 135 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 154 insertions(+), 3 deletions(-) create mode 100644 include/trace/events/spmi.h diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index 9493843..11467e1 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -22,6 +22,8 @@ #include #include +#define CREATE_TRACE_POINTS +#include static DEFINE_IDA(ctrl_ida); @@ -96,28 +98,42 @@ EXPORT_SYMBOL_GPL(spmi_device_remove); static inline int spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid) { + int ret; + if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type) return -EINVAL; - return ctrl->cmd(ctrl, opcode, sid); + ret = ctrl->cmd(ctrl, opcode, sid); + trace_spmi_cmd(opcode, sid, ret); + return ret; } static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid, u16 addr, u8 *buf, size_t len) { + int ret; + if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type) return -EINVAL; - return ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len); + trace_spmi_read_begin(opcode, sid, addr); + ret = ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len); + trace_spmi_read_end(opcode, sid, addr, ret, len, buf); + return ret; } static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid, u16 addr, const u8 *buf, size_t len) { + int ret; + if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type) return -EINVAL; - return ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len); + trace_spmi_write_begin(opcode, sid, addr, len, buf); + ret = ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len); + trace_spmi_write_end(opcode, sid, addr, ret); + return ret; } /** diff --git a/include/trace/events/spmi.h b/include/trace/events/spmi.h new file mode 100644 index 0000000..62f005e --- /dev/null +++ b/include/trace/events/spmi.h @@ -0,0 +1,135 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM spmi + +#if !defined(_TRACE_SPMI_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SPMI_H + +#include +#include + +/* + * drivers/spmi/spmi.c + */ + +TRACE_EVENT(spmi_write_begin, + TP_PROTO(u8 opcode, u8 sid, u16 addr, u8 len, const u8 *buf), + TP_ARGS(opcode, sid, addr, len, buf), + + TP_STRUCT__entry( + __field ( u8, opcode ) + __field ( u8, sid ) + __field ( u16, addr ) + __field ( u8, len ) + __dynamic_array ( u8, buf, len + 1 ) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->sid = sid; + __entry->addr = addr; + __entry->len = len + 1; + memcpy(__get_dynamic_array(buf), buf, len + 1); + ), + + TP_printk("opc=%d sid=%02d addr=0x%04x len=%d buf=0x[%*phD]", + (int)__entry->opcode, (int)__entry->sid, + (int)__entry->addr, (int)__entry->len, + (int)__entry->len, __get_dynamic_array(buf)) +); + +TRACE_EVENT(spmi_write_end, + TP_PROTO(u8 opcode, u8 sid, u16 addr, int ret), + TP_ARGS(opcode, sid, addr, ret), + + TP_STRUCT__entry( + __field ( u8, opcode ) + __field ( u8, sid ) + __field ( u16, addr ) + __field ( int, ret ) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->sid = sid; + __entry->addr = addr; + __entry->ret = ret; + ), + + TP_printk("opc=%d sid=%02d addr=0x%04x ret=%d", + (int)__entry->opcode, (int)__entry->sid, + (int)__entry->addr, __entry->ret) +); + +TRACE_EVENT(spmi_read_begin, + TP_PROTO(u8 opcode, u8 sid, u16 addr), + TP_ARGS(opcode, sid, addr), + + TP_STRUCT__entry( + __field ( u8, opcode ) + __field ( u8, sid ) + __field ( u16, addr ) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->sid = sid; + __entry->addr = addr; + ), + + TP_printk("opc=%d sid=%02d addr=0x%04x", + (int)__entry->opcode, (int)__entry->sid, + (int)__entry->addr) +); + +TRACE_EVENT(spmi_read_end, + TP_PROTO(u8 opcode, u8 sid, u16 addr, int ret, u8 len, const u8 *buf), + TP_ARGS(opcode, sid, addr, ret, len, buf), + + TP_STRUCT__entry( + __field ( u8, opcode ) + __field ( u8, sid ) + __field ( u16, addr ) + __field ( int, ret ) + __field ( u8, len ) + __dynamic_array ( u8, buf, len + 1 ) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->sid = sid; + __entry->addr = addr; + __entry->ret = ret; + __entry->len = len + 1; + memcpy(__get_dynamic_array(buf), buf, len + 1); + ), + + TP_printk("opc=%d sid=%02d addr=0x%04x ret=%d len=%02d buf=0x[%*phD]", + (int)__entry->opcode, (int)__entry->sid, + (int)__entry->addr, __entry->ret, (int)__entry->len, + (int)__entry->len, __get_dynamic_array(buf)) +); + +TRACE_EVENT(spmi_cmd, + TP_PROTO(u8 opcode, u8 sid, int ret), + TP_ARGS(opcode, sid, ret), + + TP_STRUCT__entry( + __field ( u8, opcode ) + __field ( u8, sid ) + __field ( int, ret ) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->sid = sid; + __entry->ret = ret; + ), + + TP_printk("opc=%d sid=%02d ret=%d", (int)__entry->opcode, + (int)__entry->sid, ret) +); + +#endif /* _TRACE_SPMI_H */ + +/* This part must be outside protection */ +#include -- cgit v1.1 From 60be42306f838d9231398bdb7d4ff3451ae13601 Mon Sep 17 00:00:00 2001 From: Courtney Cavin Date: Thu, 30 Jul 2015 10:53:54 -0700 Subject: spmi: pmic-arb: add support for irq_get_irqchip_state Reviewed-by: Andy Gross Signed-off-by: Courtney Cavin Signed-off-by: Bjorn Andersson Tested-by: Tim Bird Signed-off-by: Greg Kroah-Hartman --- drivers/spmi/spmi-pmic-arb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index d7119db..a4d8c04 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -575,6 +575,22 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type) return 0; } +static int qpnpint_get_irqchip_state(struct irq_data *d, + enum irqchip_irq_state which, + bool *state) +{ + u8 irq = d->hwirq >> 8; + u8 status = 0; + + if (which != IRQCHIP_STATE_LINE_LEVEL) + return -EINVAL; + + qpnpint_spmi_read(d, QPNPINT_REG_RT_STS, &status, 1); + *state = !!(status & BIT(irq)); + + return 0; +} + static struct irq_chip pmic_arb_irqchip = { .name = "pmic_arb", .irq_enable = qpnpint_irq_enable, @@ -582,6 +598,7 @@ static struct irq_chip pmic_arb_irqchip = { .irq_mask = qpnpint_irq_mask, .irq_unmask = qpnpint_irq_unmask, .irq_set_type = qpnpint_irq_set_type, + .irq_get_irqchip_state = qpnpint_get_irqchip_state, .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, }; -- cgit v1.1 From d719b76c1306370d146c517e33b25f756b9a12d5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 11:37:16 -0700 Subject: spmi: Select IRQ_DOMAIN instead of depend on it IRQ_DOMAIN is a hidden config option, so depending on it doesn't make any sense. Select the config option because it's required to compile this driver. Signed-off-by: Stephen Boyd Reviewed-by: Andy Gross Signed-off-by: Greg Kroah-Hartman --- drivers/spmi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index 982580a..0d3b70b 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -12,7 +12,7 @@ if SPMI config SPMI_MSM_PMIC_ARB tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)" - depends on IRQ_DOMAIN + select IRQ_DOMAIN depends on ARCH_QCOM || COMPILE_TEST depends on HAS_IOMEM default ARCH_QCOM -- cgit v1.1 From ef0f8f1129844cab9b0fb14aab0d7d7598d81103 Mon Sep 17 00:00:00 2001 From: Xavier Deguillard Date: Fri, 12 Jun 2015 11:43:22 -0700 Subject: VMware balloon: partially inline vmballoon_reserve_page. This split the function in two: the allocation part is inlined into the inflate function and the lock part is kept into his own function. This change is needed in order to be able to allocate more than one page before doing the hypervisor call. Signed-off-by: Xavier Deguillard Acked-by: Dmitry Torokhov Signed-off-by: Philip P. Moltmann Acked-by: Andy King Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_balloon.c | 98 ++++++++++++++++++++-------------------------- 1 file changed, 42 insertions(+), 56 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index 1916174..2799c46 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -46,7 +46,7 @@ MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver"); -MODULE_VERSION("1.2.1.3-k"); +MODULE_VERSION("1.2.2.0-k"); MODULE_ALIAS("dmi:*:svnVMware*:*"); MODULE_ALIAS("vmware_vmmemctl"); MODULE_LICENSE("GPL"); @@ -402,55 +402,37 @@ static void vmballoon_reset(struct vmballoon *b) } /* - * Allocate (or reserve) a page for the balloon and notify the host. If host - * refuses the page put it on "refuse" list and allocate another one until host - * is satisfied. "Refused" pages are released at the end of inflation cycle - * (when we allocate b->rate_alloc pages). + * Notify the host of a ballooned page. If host rejects the page put it on the + * refuse list, those refused page are then released at the end of the + * inflation cycle. */ -static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) +static int vmballoon_lock_page(struct vmballoon *b, struct page *page) { - struct page *page; - gfp_t flags; - unsigned int hv_status; - int locked; - flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP; - - do { - if (!can_sleep) - STATS_INC(b->stats.alloc); - else - STATS_INC(b->stats.sleep_alloc); - - page = alloc_page(flags); - if (!page) { - if (!can_sleep) - STATS_INC(b->stats.alloc_fail); - else - STATS_INC(b->stats.sleep_alloc_fail); - return -ENOMEM; - } + int locked, hv_status; - /* inform monitor */ - locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status); - if (locked > 0) { - STATS_INC(b->stats.refused_alloc); + locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status); + if (locked > 0) { + STATS_INC(b->stats.refused_alloc); - if (hv_status == VMW_BALLOON_ERROR_RESET || - hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED) { - __free_page(page); - return -EIO; - } + if (hv_status == VMW_BALLOON_ERROR_RESET || + hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED) { + __free_page(page); + return -EIO; + } - /* - * Place page on the list of non-balloonable pages - * and retry allocation, unless we already accumulated - * too many of them, in which case take a breather. - */ + /* + * Place page on the list of non-balloonable pages + * and retry allocation, unless we already accumulated + * too many of them, in which case take a breather. + */ + if (b->n_refused_pages < VMW_BALLOON_MAX_REFUSED) { + b->n_refused_pages++; list_add(&page->lru, &b->refused_pages); - if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED) - return -EIO; + } else { + __free_page(page); } - } while (locked != 0); + return -EIO; + } /* track allocated page */ list_add(&page->lru, &b->pages); @@ -512,7 +494,7 @@ static void vmballoon_inflate(struct vmballoon *b) unsigned int i; unsigned int allocations = 0; int error = 0; - bool alloc_can_sleep = false; + gfp_t flags = VMW_PAGE_ALLOC_NOSLEEP; pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target); @@ -543,19 +525,16 @@ static void vmballoon_inflate(struct vmballoon *b) __func__, goal, rate, b->rate_alloc); for (i = 0; i < goal; i++) { + struct page *page; - error = vmballoon_reserve_page(b, alloc_can_sleep); - if (error) { - if (error != -ENOMEM) { - /* - * Not a page allocation failure, stop this - * cycle. Maybe we'll get new target from - * the host soon. - */ - break; - } + if (flags == VMW_PAGE_ALLOC_NOSLEEP) + STATS_INC(b->stats.alloc); + else + STATS_INC(b->stats.sleep_alloc); - if (alloc_can_sleep) { + page = alloc_page(flags); + if (!page) { + if (flags == VMW_PAGE_ALLOC_CANSLEEP) { /* * CANSLEEP page allocation failed, so guest * is under severe memory pressure. Quickly @@ -563,8 +542,10 @@ static void vmballoon_inflate(struct vmballoon *b) */ b->rate_alloc = max(b->rate_alloc / 2, VMW_BALLOON_RATE_ALLOC_MIN); + STATS_INC(b->stats.sleep_alloc_fail); break; } + STATS_INC(b->stats.alloc_fail); /* * NOSLEEP page allocation failed, so the guest is @@ -579,11 +560,16 @@ static void vmballoon_inflate(struct vmballoon *b) if (i >= b->rate_alloc) break; - alloc_can_sleep = true; + flags = VMW_PAGE_ALLOC_CANSLEEP; /* Lower rate for sleeping allocations. */ rate = b->rate_alloc; + continue; } + error = vmballoon_lock_page(b, page); + if (error) + break; + if (++allocations > VMW_BALLOON_YIELD_THRESHOLD) { cond_resched(); allocations = 0; -- cgit v1.1 From eb79100fe6a696bfbad21aaf8e373d72763c7462 Mon Sep 17 00:00:00 2001 From: Xavier Deguillard Date: Fri, 12 Jun 2015 11:43:23 -0700 Subject: VMware balloon: Add support for balloon capabilities. In order to extend the balloon protocol, the hypervisor and the guest driver need to agree on a set of supported functionality to use. Signed-off-by: Xavier Deguillard Acked-by: Dmitry Torokhov Signed-off-by: Philip P. Moltmann Acked-by: Andy King Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_balloon.c | 74 +++++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 30 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index 2799c46..ffb5634 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -46,7 +46,7 @@ MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver"); -MODULE_VERSION("1.2.2.0-k"); +MODULE_VERSION("1.3.0.0-k"); MODULE_ALIAS("dmi:*:svnVMware*:*"); MODULE_ALIAS("vmware_vmmemctl"); MODULE_LICENSE("GPL"); @@ -110,9 +110,18 @@ MODULE_LICENSE("GPL"); */ #define VMW_BALLOON_HV_PORT 0x5670 #define VMW_BALLOON_HV_MAGIC 0x456c6d6f -#define VMW_BALLOON_PROTOCOL_VERSION 2 #define VMW_BALLOON_GUEST_ID 1 /* Linux */ +enum vmwballoon_capabilities { + /* + * Bit 0 is reserved and not associated to any capability. + */ + VMW_BALLOON_BASIC_CMDS = (1 << 1), + VMW_BALLOON_BATCHED_CMDS = (1 << 2) +}; + +#define VMW_BALLOON_CAPABILITIES (VMW_BALLOON_BASIC_CMDS) + #define VMW_BALLOON_CMD_START 0 #define VMW_BALLOON_CMD_GET_TARGET 1 #define VMW_BALLOON_CMD_LOCK 2 @@ -120,32 +129,36 @@ MODULE_LICENSE("GPL"); #define VMW_BALLOON_CMD_GUEST_ID 4 /* error codes */ -#define VMW_BALLOON_SUCCESS 0 -#define VMW_BALLOON_FAILURE -1 -#define VMW_BALLOON_ERROR_CMD_INVALID 1 -#define VMW_BALLOON_ERROR_PPN_INVALID 2 -#define VMW_BALLOON_ERROR_PPN_LOCKED 3 -#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4 -#define VMW_BALLOON_ERROR_PPN_PINNED 5 -#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6 -#define VMW_BALLOON_ERROR_RESET 7 -#define VMW_BALLOON_ERROR_BUSY 8 - -#define VMWARE_BALLOON_CMD(cmd, data, result) \ -({ \ - unsigned long __stat, __dummy1, __dummy2; \ - __asm__ __volatile__ ("inl %%dx" : \ - "=a"(__stat), \ - "=c"(__dummy1), \ - "=d"(__dummy2), \ - "=b"(result) : \ - "0"(VMW_BALLOON_HV_MAGIC), \ - "1"(VMW_BALLOON_CMD_##cmd), \ - "2"(VMW_BALLOON_HV_PORT), \ - "3"(data) : \ - "memory"); \ - result &= -1UL; \ - __stat & -1UL; \ +#define VMW_BALLOON_SUCCESS 0 +#define VMW_BALLOON_FAILURE -1 +#define VMW_BALLOON_ERROR_CMD_INVALID 1 +#define VMW_BALLOON_ERROR_PPN_INVALID 2 +#define VMW_BALLOON_ERROR_PPN_LOCKED 3 +#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4 +#define VMW_BALLOON_ERROR_PPN_PINNED 5 +#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6 +#define VMW_BALLOON_ERROR_RESET 7 +#define VMW_BALLOON_ERROR_BUSY 8 + +#define VMW_BALLOON_SUCCESS_WITH_CAPABILITIES (0x03000000) + +#define VMWARE_BALLOON_CMD(cmd, data, result) \ +({ \ + unsigned long __status, __dummy1, __dummy2; \ + __asm__ __volatile__ ("inl %%dx" : \ + "=a"(__status), \ + "=c"(__dummy1), \ + "=d"(__dummy2), \ + "=b"(result) : \ + "0"(VMW_BALLOON_HV_MAGIC), \ + "1"(VMW_BALLOON_CMD_##cmd), \ + "2"(VMW_BALLOON_HV_PORT), \ + "3"(data) : \ + "memory"); \ + if (VMW_BALLOON_CMD_##cmd == VMW_BALLOON_CMD_START) \ + result = __dummy1; \ + result &= -1UL; \ + __status & -1UL; \ }) #ifdef CONFIG_DEBUG_FS @@ -223,11 +236,12 @@ static struct vmballoon balloon; */ static bool vmballoon_send_start(struct vmballoon *b) { - unsigned long status, dummy; + unsigned long status, capabilities; STATS_INC(b->stats.start); - status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy); + status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_CAPABILITIES, + capabilities); if (status == VMW_BALLOON_SUCCESS) return true; -- cgit v1.1 From c0bd1b9e58959c51a4c939505f89721dfbc73c44 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 22 Jul 2015 13:17:15 -0500 Subject: Revert "ti-st: add device tree support" This reverts commit 46d0d33350e9b32642d745a8b46a954910196b4d. This binding is horrible and never should have been merged. It is not documented nor are there any in tree users, so reverting it will not break anything we care about. Lets revert it before we do have users. The problems with it are: - It is not documented. - The GPIO connection is described with a custom property and uses Linux GPIO numbering. - The UART connection is described using the Linux tty device name. Cc: Gigi Joseph Cc: Greg Kroah-Hartman Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 94 ++++---------------------------------------- drivers/misc/ti-st/st_ll.c | 17 +------- include/linux/ti_wilink_st.h | 1 - 3 files changed, 9 insertions(+), 103 deletions(-) diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index c84093e..c828282 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -36,8 +36,6 @@ #include #include #include -#include -#include #define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */ static struct platform_device *st_kim_devices[MAX_ST_DEVICES]; @@ -45,9 +43,6 @@ static struct platform_device *st_kim_devices[MAX_ST_DEVICES]; /**********************************************************************/ /* internal functions */ -struct ti_st_plat_data *dt_pdata; -static struct ti_st_plat_data *get_platform_data(struct device *dev); - /** * st_get_plat_device - * function which returns the reference to the platform device @@ -469,12 +464,7 @@ long st_kim_start(void *kim_data) struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; pr_info(" %s", __func__); - if (kim_gdata->kim_pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = kim_gdata->kim_pdev->dev.platform_data; - } + pdata = kim_gdata->kim_pdev->dev.platform_data; do { /* platform specific enabling code here */ @@ -534,18 +524,12 @@ long st_kim_stop(void *kim_data) { long err = 0; struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; - struct ti_st_plat_data *pdata; + struct ti_st_plat_data *pdata = + kim_gdata->kim_pdev->dev.platform_data; struct tty_struct *tty = kim_gdata->core_data->tty; reinit_completion(&kim_gdata->ldisc_installed); - if (kim_gdata->kim_pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else - pdata = kim_gdata->kim_pdev->dev.platform_data; - - if (tty) { /* can be called before ldisc is installed */ /* Flush any pending characters in the driver and discipline. */ tty_ldisc_flush(tty); @@ -737,52 +721,13 @@ static const struct file_operations list_debugfs_fops = { * board-*.c file */ -static const struct of_device_id kim_of_match[] = { -{ - .compatible = "kim", - }, - {} -}; -MODULE_DEVICE_TABLE(of, kim_of_match); - -static struct ti_st_plat_data *get_platform_data(struct device *dev) -{ - struct device_node *np = dev->of_node; - const u32 *dt_property; - int len; - - dt_pdata = kzalloc(sizeof(*dt_pdata), GFP_KERNEL); - if (!dt_pdata) - return NULL; - - dt_property = of_get_property(np, "dev_name", &len); - if (dt_property) - memcpy(&dt_pdata->dev_name, dt_property, len); - of_property_read_u32(np, "nshutdown_gpio", - &dt_pdata->nshutdown_gpio); - of_property_read_u32(np, "flow_cntrl", &dt_pdata->flow_cntrl); - of_property_read_u32(np, "baud_rate", &dt_pdata->baud_rate); - - return dt_pdata; -} - static struct dentry *kim_debugfs_dir; static int kim_probe(struct platform_device *pdev) { struct kim_data_s *kim_gdata; - struct ti_st_plat_data *pdata; + struct ti_st_plat_data *pdata = pdev->dev.platform_data; int err; - if (pdev->dev.of_node) - pdata = get_platform_data(&pdev->dev); - else - pdata = pdev->dev.platform_data; - - if (pdata == NULL) { - dev_err(&pdev->dev, "Platform Data is missing\n"); - return -ENXIO; - } - if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) { /* multiple devices could exist */ st_kim_devices[pdev->id] = pdev; @@ -863,16 +808,9 @@ err_core_init: static int kim_remove(struct platform_device *pdev) { /* free the GPIOs requested */ - struct ti_st_plat_data *pdata; + struct ti_st_plat_data *pdata = pdev->dev.platform_data; struct kim_data_s *kim_gdata; - if (pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = pdev->dev.platform_data; - } - kim_gdata = platform_get_drvdata(pdev); /* Free the Bluetooth/FM/GPIO @@ -890,22 +828,12 @@ static int kim_remove(struct platform_device *pdev) kfree(kim_gdata); kim_gdata = NULL; - kfree(dt_pdata); - dt_pdata = NULL; - return 0; } static int kim_suspend(struct platform_device *pdev, pm_message_t state) { - struct ti_st_plat_data *pdata; - - if (pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = pdev->dev.platform_data; - } + struct ti_st_plat_data *pdata = pdev->dev.platform_data; if (pdata->suspend) return pdata->suspend(pdev, state); @@ -915,14 +843,7 @@ static int kim_suspend(struct platform_device *pdev, pm_message_t state) static int kim_resume(struct platform_device *pdev) { - struct ti_st_plat_data *pdata; - - if (pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = pdev->dev.platform_data; - } + struct ti_st_plat_data *pdata = pdev->dev.platform_data; if (pdata->resume) return pdata->resume(pdev); @@ -939,7 +860,6 @@ static struct platform_driver kim_platform_driver = { .resume = kim_resume, .driver = { .name = "kim", - .of_match_table = of_match_ptr(kim_of_match), }, }; diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 518e1b7..93b4d67 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -26,7 +26,6 @@ #include /**********************************************************************/ - /* internal functions */ static void send_ll_cmd(struct st_data_s *st_data, unsigned char cmd) @@ -54,13 +53,7 @@ static void ll_device_want_to_sleep(struct st_data_s *st_data) /* communicate to platform about chip asleep */ kim_data = st_data->kim_data; - if (kim_data->kim_pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = kim_data->kim_pdev->dev.platform_data; - } - + pdata = kim_data->kim_pdev->dev.platform_data; if (pdata->chip_asleep) pdata->chip_asleep(NULL); } @@ -93,13 +86,7 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) /* communicate to platform about chip wakeup */ kim_data = st_data->kim_data; - if (kim_data->kim_pdev->dev.of_node) { - pr_debug("use device tree data"); - pdata = dt_pdata; - } else { - pdata = kim_data->kim_pdev->dev.platform_data; - } - + pdata = kim_data->kim_pdev->dev.platform_data; if (pdata->chip_awake) pdata->chip_awake(NULL); } diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index c78dcfe..d4217ef 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -86,7 +86,6 @@ struct st_proto_s { extern long st_register(struct st_proto_s *); extern long st_unregister(struct st_proto_s *); -extern struct ti_st_plat_data *dt_pdata; /* * header information used by st_core.c -- cgit v1.1 From 513da46d4b72bf6c4c956c57044fcbcfe321deeb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=BCrg=20Billeter?= Date: Wed, 24 Jun 2015 12:24:06 +0200 Subject: ti-st: st_kim: use gpio_set_value_cansleep to fix warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GPIO accessor functions may sleep. Signed-off-by: Jürg Billeter Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index c828282..71b6455 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -472,9 +472,9 @@ long st_kim_start(void *kim_data) pdata->chip_enable(kim_gdata); /* Configure BT nShutdown to HIGH state */ - gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); mdelay(5); /* FIXME: a proper toggle */ - gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH); mdelay(100); /* re-initialize the completion */ reinit_completion(&kim_gdata->ldisc_installed); @@ -550,11 +550,11 @@ long st_kim_stop(void *kim_data) } /* By default configure BT nShutdown to LOW state */ - gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); mdelay(1); - gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH); mdelay(1); - gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); /* platform specific disable */ if (pdata->chip_disable) -- cgit v1.1 From e2ef93930326134001523016782daddf1a4b78a2 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 8 Jul 2015 17:24:46 +0200 Subject: uio: Destroy uio_idr on module exit Destroy uio_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez ) @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } Signed-off-by: Johannes Thumshirn Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 3257d42..8196581 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -896,6 +896,7 @@ static int __init uio_init(void) static void __exit uio_exit(void) { release_uio_class(); + idr_destroy(&uio_idr); } module_init(uio_init) -- cgit v1.1 From d12f569c9b57ecdb18631d0b54c5224da5a1c233 Mon Sep 17 00:00:00 2001 From: Vaishali Thakkar Date: Wed, 8 Jul 2015 10:24:27 +0530 Subject: uio: uio_fsl_elbc_gpcm: Use module_platform_driver Use module_platform_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return platform_driver_register(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { platform_driver_unregister(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_platform_driver; @@ -module_exit(e); +module_platform_driver(x); Signed-off-by: Vaishali Thakkar Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_fsl_elbc_gpcm.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/uio/uio_fsl_elbc_gpcm.c b/drivers/uio/uio_fsl_elbc_gpcm.c index b6cac91..2bcf80c1 100644 --- a/drivers/uio/uio_fsl_elbc_gpcm.c +++ b/drivers/uio/uio_fsl_elbc_gpcm.c @@ -480,19 +480,7 @@ static struct platform_driver uio_fsl_elbc_gpcm_driver = { .probe = uio_fsl_elbc_gpcm_probe, .remove = uio_fsl_elbc_gpcm_remove, }; - -static int __init uio_fsl_elbc_gpcm_init(void) -{ - return platform_driver_register(&uio_fsl_elbc_gpcm_driver); -} - -static void __exit uio_fsl_elbc_gpcm_exit(void) -{ - platform_driver_unregister(&uio_fsl_elbc_gpcm_driver); -} - -module_init(uio_fsl_elbc_gpcm_init); -module_exit(uio_fsl_elbc_gpcm_exit); +module_platform_driver(uio_fsl_elbc_gpcm_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Ogness "); -- cgit v1.1 From 686079c9b71a4673d0068ea4538f22359070ee33 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 29 Jun 2015 09:12:38 +0200 Subject: uio: UIO_PRUSS should depend on HAS_DMA If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/uio/uio_pruss.ko] undefined! ERROR: "dma_free_coherent" [drivers/uio/uio_pruss.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/uio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 48fb1d9..52c98ce 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -127,7 +127,7 @@ config UIO_FSL_ELBC_GPCM_NETX5152 config UIO_PRUSS tristate "Texas Instruments PRUSS driver" select GENERIC_ALLOCATOR - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA help PRUSS driver for OMAPL138/DA850/AM18XX devices PRUSS driver requires user space components, examples and user space -- cgit v1.1 From e5742ef1279e4cfe52fee7056b15a848ffe5c723 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Fri, 31 Jul 2015 09:37:21 -0600 Subject: coresight: binding for ETMv4 coresight drivers Adding compatible string for new coresight ETMv4 tracer. Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/arm/coresight.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 65a6db2..62938eb 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -17,6 +17,7 @@ its hardware characteristcs. - "arm,coresight-tmc", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; - "arm,coresight-etm3x", "arm,primecell"; + - "arm,coresight-etm4x", "arm,primecell"; - "qcom,coresight-replicator1x", "arm,primecell"; * reg: physical base address and length of the register -- cgit v1.1 From 27d3fd3d0d89030798121718637d6b0ed59e0ca5 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 31 Jul 2015 09:37:22 -0600 Subject: coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID Add Qualcomm's PTM v1.1 peripheral ID to supported devices. This device could be found at least in MSM8974 and APQ8064 chipsets. Signed-off-by: Ivan T. Ivanov Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm3x.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c index 018a00f..cca98a8 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x.c +++ b/drivers/hwtracing/coresight/coresight-etm3x.c @@ -1912,6 +1912,11 @@ static struct amba_id etm_ids[] = { .mask = 0x0003ffff, .data = "PTM 1.1", }, + { /* PTM 1.1 Qualcomm */ + .id = 0x0003006f, + .mask = 0x0003ffff, + .data = "PTM 1.1", + }, { 0, 0}, }; -- cgit v1.1 From c35aaa13794a0c5b752af19993222d08497e7036 Mon Sep 17 00:00:00 2001 From: Vaishali Thakkar Date: Fri, 31 Jul 2015 09:37:23 -0600 Subject: coresight: replicator: Use builtin_platform_driver() Macro builtin_platform_driver can be used for builtin drivers that don't do anything in driver init. This file depends on Kconfig CONFIG_CORESIGHT_LINKS_AND_SINKS which eventually depends on CORESIGHT. Both CONFIG_CORESIGHT_LINKS_AND_SINKS and CORESIGHT are bool. So, use builtin_platform_driver and remove some boilerplate code. Also, remove header file init.h as functionality like module_init and module_exit is now relocated to module.h. Signed-off-by: Vaishali Thakkar Suggested-by: Paul Bolle Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-replicator.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index 7974b7c..963ac19 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include @@ -184,17 +183,7 @@ static struct platform_driver replicator_driver = { }, }; -static int __init replicator_init(void) -{ - return platform_driver_register(&replicator_driver); -} -module_init(replicator_init); - -static void __exit replicator_exit(void) -{ - platform_driver_unregister(&replicator_driver); -} -module_exit(replicator_exit); +builtin_platform_driver(replicator_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("CoreSight Replicator driver"); -- cgit v1.1 From 414a1417d7b35e0e72edb16e45840e242cb6b52e Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 31 Jul 2015 09:37:24 -0600 Subject: coresight-etm3x: Change the name of the ctxid_val to ctxid_pid 'ctxid_val' array was used to store the value of ETM context ID comparator which actually stores the process ID to be traced, so using 'ctxid_pid' as its name instead make it easier to understand. This patch also changes the ABI, it is normally not allowed, but fortunately it is a testing ABI and very new for now. Nevertheless, if you don't think it should be changed, we could always add an alias for userspace. Signed-off-by: Chunyan Zhang Reviewed-by: Mark Brown Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-bus-coresight-devices-etm3x | 2 +- drivers/hwtracing/coresight/coresight-etm.h | 4 ++-- drivers/hwtracing/coresight/coresight-etm3x.c | 16 ++++++++-------- 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index b4d0b99..d72ca17 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -112,7 +112,7 @@ KernelVersion: 3.19 Contact: Mathieu Poirier Description: (RW) Mask to apply to all the context ID comparator. -What: /sys/bus/coresight/devices/.[etm|ptm]/ctxid_val +What: /sys/bus/coresight/devices/.[etm|ptm]/ctxid_pid Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 098ffbe..52af5f0 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -183,7 +183,7 @@ * @seq_13_event: event causing the transition from 1 to 3. * @seq_curr_state: current value of the sequencer register. * @ctxid_idx: index for the context ID registers. - * @ctxid_val: value for the context ID to trigger on. + * @ctxid_pid: value for the context ID to trigger on. * @ctxid_mask: mask applicable to all the context IDs. * @sync_freq: Synchronisation frequency. * @timestamp_event: Defines an event that requests the insertion @@ -235,7 +235,7 @@ struct etm_drvdata { u32 seq_13_event; u32 seq_curr_state; u8 ctxid_idx; - u32 ctxid_val[ETM_MAX_CTXID_CMP]; + u32 ctxid_pid[ETM_MAX_CTXID_CMP]; u32 ctxid_mask; u32 sync_freq; u32 timestamp_event; diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c index cca98a8..361b820 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x.c +++ b/drivers/hwtracing/coresight/coresight-etm3x.c @@ -238,7 +238,7 @@ static void etm_set_default(struct etm_drvdata *drvdata) drvdata->seq_curr_state = 0x0; drvdata->ctxid_idx = 0x0; for (i = 0; i < drvdata->nr_ctxid_cmp; i++) - drvdata->ctxid_val[i] = 0x0; + drvdata->ctxid_pid[i] = 0x0; drvdata->ctxid_mask = 0x0; } @@ -289,7 +289,7 @@ static void etm_enable_hw(void *info) for (i = 0; i < drvdata->nr_ext_out; i++) etm_writel(drvdata, ETM_DEFAULT_EVENT_VAL, ETMEXTOUTEVRn(i)); for (i = 0; i < drvdata->nr_ctxid_cmp; i++) - etm_writel(drvdata, drvdata->ctxid_val[i], ETMCIDCVRn(i)); + etm_writel(drvdata, drvdata->ctxid_pid[i], ETMCIDCVRn(i)); etm_writel(drvdata, drvdata->ctxid_mask, ETMCIDCMR); etm_writel(drvdata, drvdata->sync_freq, ETMSYNCFR); /* No external input selected */ @@ -1386,20 +1386,20 @@ static ssize_t ctxid_idx_store(struct device *dev, } static DEVICE_ATTR_RW(ctxid_idx); -static ssize_t ctxid_val_show(struct device *dev, +static ssize_t ctxid_pid_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned long val; struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); spin_lock(&drvdata->spinlock); - val = drvdata->ctxid_val[drvdata->ctxid_idx]; + val = drvdata->ctxid_pid[drvdata->ctxid_idx]; spin_unlock(&drvdata->spinlock); return sprintf(buf, "%#lx\n", val); } -static ssize_t ctxid_val_store(struct device *dev, +static ssize_t ctxid_pid_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { @@ -1412,12 +1412,12 @@ static ssize_t ctxid_val_store(struct device *dev, return ret; spin_lock(&drvdata->spinlock); - drvdata->ctxid_val[drvdata->ctxid_idx] = val; + drvdata->ctxid_pid[drvdata->ctxid_idx] = val; spin_unlock(&drvdata->spinlock); return size; } -static DEVICE_ATTR_RW(ctxid_val); +static DEVICE_ATTR_RW(ctxid_pid); static ssize_t ctxid_mask_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1609,7 +1609,7 @@ static struct attribute *coresight_etm_attrs[] = { &dev_attr_seq_13_event.attr, &dev_attr_seq_curr_state.attr, &dev_attr_ctxid_idx.attr, - &dev_attr_ctxid_val.attr, + &dev_attr_ctxid_pid.attr, &dev_attr_ctxid_mask.attr, &dev_attr_sync_freq.attr, &dev_attr_timestamp_event.attr, -- cgit v1.1 From cd196ac3fa5a574f3ddf37b66fbe8c58225c3355 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 31 Jul 2015 09:37:25 -0600 Subject: coresight-etm4x: Change the name of the ctxid_val to ctxid_pid 'ctxid_val' array was used to store the value of ETM context ID comparator which actually stores the process ID to be traced, so using 'ctxid_pid' as its name instead make it easier to understand. This patch also changes the ABI, it is normally not allowed, but fortunately it is a testing ABI and very new for now. Nevertheless, if you don't think it should be changed, we could always add an alias for userspace. Signed-off-by: Chunyan Zhang Reviewed-by: Mark Brown Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-bus-coresight-devices-etm4x | 2 +- drivers/hwtracing/coresight/coresight-etm4x.c | 20 ++++++++++---------- drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++-- 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 2fe2e3d..2355ed8 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -249,7 +249,7 @@ KernelVersion: 4.01 Contact: Mathieu Poirier Description: (RW) Select which context ID comparator to work with. -What: /sys/bus/coresight/devices/.etm/ctxid_val +What: /sys/bus/coresight/devices/.etm/ctxid_pid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 1312e99..9afbda5 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -155,7 +155,7 @@ static void etm4_enable_hw(void *info) drvdata->base + TRCACATRn(i)); } for (i = 0; i < drvdata->numcidc; i++) - writeq_relaxed(drvdata->ctxid_val[i], + writeq_relaxed(drvdata->ctxid_pid[i], drvdata->base + TRCCIDCVRn(i)); writel_relaxed(drvdata->ctxid_mask0, drvdata->base + TRCCIDCCTLR0); writel_relaxed(drvdata->ctxid_mask1, drvdata->base + TRCCIDCCTLR1); @@ -507,7 +507,7 @@ static ssize_t reset_store(struct device *dev, drvdata->ctxid_idx = 0x0; for (i = 0; i < drvdata->numcidc; i++) - drvdata->ctxid_val[i] = 0x0; + drvdata->ctxid_pid[i] = 0x0; drvdata->ctxid_mask0 = 0x0; drvdata->ctxid_mask1 = 0x0; @@ -1815,7 +1815,7 @@ static ssize_t ctxid_idx_store(struct device *dev, } static DEVICE_ATTR_RW(ctxid_idx); -static ssize_t ctxid_val_show(struct device *dev, +static ssize_t ctxid_pid_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1825,12 +1825,12 @@ static ssize_t ctxid_val_show(struct device *dev, spin_lock(&drvdata->spinlock); idx = drvdata->ctxid_idx; - val = (unsigned long)drvdata->ctxid_val[idx]; + val = (unsigned long)drvdata->ctxid_pid[idx]; spin_unlock(&drvdata->spinlock); return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); } -static ssize_t ctxid_val_store(struct device *dev, +static ssize_t ctxid_pid_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { @@ -1850,11 +1850,11 @@ static ssize_t ctxid_val_store(struct device *dev, spin_lock(&drvdata->spinlock); idx = drvdata->ctxid_idx; - drvdata->ctxid_val[idx] = (u64)val; + drvdata->ctxid_pid[idx] = (u64)val; spin_unlock(&drvdata->spinlock); return size; } -static DEVICE_ATTR_RW(ctxid_val); +static DEVICE_ATTR_RW(ctxid_pid); static ssize_t ctxid_masks_show(struct device *dev, struct device_attribute *attr, @@ -1949,7 +1949,7 @@ static ssize_t ctxid_masks_store(struct device *dev, */ for (j = 0; j < 8; j++) { if (maskbyte & 1) - drvdata->ctxid_val[i] &= ~(0xFF << (j * 8)); + drvdata->ctxid_pid[i] &= ~(0xFF << (j * 8)); maskbyte >>= 1; } /* Select the next ctxid comparator mask value */ @@ -2193,7 +2193,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_res_idx.attr, &dev_attr_res_ctrl.attr, &dev_attr_ctxid_idx.attr, - &dev_attr_ctxid_val.attr, + &dev_attr_ctxid_pid.attr, &dev_attr_ctxid_masks.attr, &dev_attr_vmid_idx.attr, &dev_attr_vmid_val.attr, @@ -2514,7 +2514,7 @@ static void etm4_init_default_data(struct etmv4_drvdata *drvdata) } for (i = 0; i < drvdata->numcidc; i++) - drvdata->ctxid_val[i] = 0x0; + drvdata->ctxid_pid[i] = 0x0; drvdata->ctxid_mask0 = 0x0; drvdata->ctxid_mask1 = 0x0; diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index e08e983..1e8fb36 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -265,7 +265,7 @@ * @addr_type: Current status of the comparator register. * @ctxid_idx: Context ID index selector. * @ctxid_size: Size of the context ID field to consider. - * @ctxid_val: Value of the context ID comparator. + * @ctxid_pid: Value of the context ID comparator. * @ctxid_mask0:Context ID comparator mask for comparator 0-3. * @ctxid_mask1:Context ID comparator mask for comparator 4-7. * @vmid_idx: VM ID index selector. @@ -352,7 +352,7 @@ struct etmv4_drvdata { u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP]; u8 ctxid_idx; u8 ctxid_size; - u64 ctxid_val[ETMv4_MAX_CTXID_CMP]; + u64 ctxid_pid[ETMv4_MAX_CTXID_CMP]; u32 ctxid_mask0; u32 ctxid_mask1; u8 vmid_idx; -- cgit v1.1 From 722102274ab1206634d31abe4f438a911a0945d2 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 31 Jul 2015 09:37:26 -0600 Subject: Coresight: Add an interface for supporting ETM3/4 Context ID tracing If PID namespace is enabled, everytime users configure the Context ID register to trace the specific process, there needs to be a translation between the real PID seen from the kernel and VPID seen from the namespace in which the user's process resides . This patch just adds the translation interface for ETMs. Signed-off-by: Chunyan Zhang Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- include/linux/coresight.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 3486b90..626da69 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -248,4 +248,24 @@ static inline struct coresight_platform_data *of_get_coresight_platform_data( struct device *dev, struct device_node *node) { return NULL; } #endif +#ifdef CONFIG_PID_NS +static inline unsigned long +coresight_vpid_to_pid(unsigned long vpid) +{ + struct task_struct *task = NULL; + unsigned long pid = 0; + + rcu_read_lock(); + task = find_task_by_vpid(vpid); + if (task) + pid = task_pid_nr(task); + rcu_read_unlock(); + + return pid; +} +#else +static inline unsigned long +coresight_vpid_to_pid(unsigned long vpid) { return vpid; } +#endif + #endif -- cgit v1.1 From a440617e0d882a35accdd32dd7ae180885c6b28c Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 31 Jul 2015 09:37:27 -0600 Subject: coresight-etm3x: Support context-ID tracing when PID namespace is enabled The Coresight ETM drivers already support context-ID tracing, but it won't work when PID namespace is enabled. This is because when using PID namespace a process id (ie. VPID) seen from the current namespace differs from the id (ie. PID) seen by kernel. So when users write the process id seen by themselves to ETM, there needs to be a translation from VPID to PID, as such ETM drivers will write the PID into the Context ID register correctly. Signed-off-by: Chunyan Zhang Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm.h | 3 +++ drivers/hwtracing/coresight/coresight-etm3x.c | 16 +++++++++++----- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 52af5f0..b4481eb 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -184,6 +184,8 @@ * @seq_curr_state: current value of the sequencer register. * @ctxid_idx: index for the context ID registers. * @ctxid_pid: value for the context ID to trigger on. + * @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise + * the same value of ctxid_pid. * @ctxid_mask: mask applicable to all the context IDs. * @sync_freq: Synchronisation frequency. * @timestamp_event: Defines an event that requests the insertion @@ -236,6 +238,7 @@ struct etm_drvdata { u32 seq_curr_state; u8 ctxid_idx; u32 ctxid_pid[ETM_MAX_CTXID_CMP]; + u32 ctxid_vpid[ETM_MAX_CTXID_CMP]; u32 ctxid_mask; u32 sync_freq; u32 timestamp_event; diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c index 361b820..bf2476e 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x.c +++ b/drivers/hwtracing/coresight/coresight-etm3x.c @@ -237,8 +237,11 @@ static void etm_set_default(struct etm_drvdata *drvdata) drvdata->seq_curr_state = 0x0; drvdata->ctxid_idx = 0x0; - for (i = 0; i < drvdata->nr_ctxid_cmp; i++) + for (i = 0; i < drvdata->nr_ctxid_cmp; i++) { drvdata->ctxid_pid[i] = 0x0; + drvdata->ctxid_vpid[i] = 0x0; + } + drvdata->ctxid_mask = 0x0; } @@ -1393,7 +1396,7 @@ static ssize_t ctxid_pid_show(struct device *dev, struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); spin_lock(&drvdata->spinlock); - val = drvdata->ctxid_pid[drvdata->ctxid_idx]; + val = drvdata->ctxid_vpid[drvdata->ctxid_idx]; spin_unlock(&drvdata->spinlock); return sprintf(buf, "%#lx\n", val); @@ -1404,15 +1407,18 @@ static ssize_t ctxid_pid_store(struct device *dev, const char *buf, size_t size) { int ret; - unsigned long val; + unsigned long vpid, pid; struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); - ret = kstrtoul(buf, 16, &val); + ret = kstrtoul(buf, 16, &vpid); if (ret) return ret; + pid = coresight_vpid_to_pid(vpid); + spin_lock(&drvdata->spinlock); - drvdata->ctxid_pid[drvdata->ctxid_idx] = val; + drvdata->ctxid_pid[drvdata->ctxid_idx] = pid; + drvdata->ctxid_vpid[drvdata->ctxid_idx] = vpid; spin_unlock(&drvdata->spinlock); return size; -- cgit v1.1 From f67b467aab10685f695190d2f471221e7a314374 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 31 Jul 2015 09:37:28 -0600 Subject: coresight-etm4x: Support context-ID tracing when PID namespace is enabled Like ETTv3, ETMv4 also needs the similar modifications to support Context ID tracing when PID namespace is enabled. Signed-off-by: Chunyan Zhang Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm4x.c | 21 +++++++++++++++------ drivers/hwtracing/coresight/coresight-etm4x.h | 3 +++ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 9afbda5..254a81a 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -506,8 +506,11 @@ static ssize_t reset_store(struct device *dev, } drvdata->ctxid_idx = 0x0; - for (i = 0; i < drvdata->numcidc; i++) + for (i = 0; i < drvdata->numcidc; i++) { drvdata->ctxid_pid[i] = 0x0; + drvdata->ctxid_vpid[i] = 0x0; + } + drvdata->ctxid_mask0 = 0x0; drvdata->ctxid_mask1 = 0x0; @@ -1825,7 +1828,7 @@ static ssize_t ctxid_pid_show(struct device *dev, spin_lock(&drvdata->spinlock); idx = drvdata->ctxid_idx; - val = (unsigned long)drvdata->ctxid_pid[idx]; + val = (unsigned long)drvdata->ctxid_vpid[idx]; spin_unlock(&drvdata->spinlock); return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); } @@ -1835,7 +1838,7 @@ static ssize_t ctxid_pid_store(struct device *dev, const char *buf, size_t size) { u8 idx; - unsigned long val; + unsigned long vpid, pid; struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); /* @@ -1845,12 +1848,15 @@ static ssize_t ctxid_pid_store(struct device *dev, */ if (!drvdata->ctxid_size || !drvdata->numcidc) return -EINVAL; - if (kstrtoul(buf, 16, &val)) + if (kstrtoul(buf, 16, &vpid)) return -EINVAL; + pid = coresight_vpid_to_pid(vpid); + spin_lock(&drvdata->spinlock); idx = drvdata->ctxid_idx; - drvdata->ctxid_pid[idx] = (u64)val; + drvdata->ctxid_pid[idx] = (u64)pid; + drvdata->ctxid_vpid[idx] = (u64)vpid; spin_unlock(&drvdata->spinlock); return size; } @@ -2513,8 +2519,11 @@ static void etm4_init_default_data(struct etmv4_drvdata *drvdata) drvdata->addr_type[1] = ETM_ADDR_TYPE_RANGE; } - for (i = 0; i < drvdata->numcidc; i++) + for (i = 0; i < drvdata->numcidc; i++) { drvdata->ctxid_pid[i] = 0x0; + drvdata->ctxid_vpid[i] = 0x0; + } + drvdata->ctxid_mask0 = 0x0; drvdata->ctxid_mask1 = 0x0; diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index 1e8fb36..c341002 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -266,6 +266,8 @@ * @ctxid_idx: Context ID index selector. * @ctxid_size: Size of the context ID field to consider. * @ctxid_pid: Value of the context ID comparator. + * @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise + * the same value of ctxid_pid. * @ctxid_mask0:Context ID comparator mask for comparator 0-3. * @ctxid_mask1:Context ID comparator mask for comparator 4-7. * @vmid_idx: VM ID index selector. @@ -353,6 +355,7 @@ struct etmv4_drvdata { u8 ctxid_idx; u8 ctxid_size; u64 ctxid_pid[ETMv4_MAX_CTXID_CMP]; + u64 ctxid_vpid[ETMv4_MAX_CTXID_CMP]; u32 ctxid_mask0; u32 ctxid_mask1; u8 vmid_idx; -- cgit v1.1 From f8b66fe52d3ae97df9f2eef6410bd5aef095914c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 31 Jul 2015 09:37:29 -0600 Subject: Doc: trace: Fix typo in coresight.txt This patch fix spelling typos found in coresight.txt Signed-off-by: Masanari Iida Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- Documentation/trace/coresight.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 77d14d5..0a5c329 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -15,7 +15,7 @@ HW assisted tracing is becoming increasingly useful when dealing with systems that have many SoCs and other components like GPU and DMA engines. ARM has developed a HW assisted tracing solution by means of different components, each being added to a design at synthesis time to cater to specific tracing needs. -Compoments are generally categorised as source, link and sinks and are +Components are generally categorised as source, link and sinks and are (usually) discovered using the AMBA bus. "Sources" generate a compressed stream representing the processor instruction @@ -138,7 +138,7 @@ void coresight_unregister(struct coresight_device *csdev); The registering function is taking a "struct coresight_device *csdev" and register the device with the core framework. The unregister function takes -a reference to a "strut coresight_device", obtained at registration time. +a reference to a "struct coresight_device", obtained at registration time. If everything goes well during the registration process the new devices will show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: -- cgit v1.1 From ff63ec1312dabd28876c9c03b5ed172a879bfb60 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 31 Jul 2015 09:37:30 -0600 Subject: coresight: Fix implicit inclusion of linux/sched.h The patch "Coresight: Add an interface for supporting ETM3/4 Context ID tracing" adds uses of find_task_by_vpid() and task_pid_nr() from linux/sched.h but does not include that header causing build errors in at least an ARM allmodconfig where it is not implicitly included. Add an explicit include to fix that. Signed-off-by: Mark Brown Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- include/linux/coresight.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 626da69..c69e1b9 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -14,6 +14,7 @@ #define _LINUX_CORESIGHT_H #include +#include /* Peripheral id registers (0xFD0-0xFEC) */ #define CORESIGHT_PERIPHIDR4 0xfd0 -- cgit v1.1 From d25ded8d3c6ecc3043763d4330c964603dc61bd4 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Fri, 3 Jul 2015 13:35:36 +1000 Subject: char/nvram: Use bitwise OR to obtain Atari video mode data Signed-off-by: Finn Thain Acked-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/char/nvram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 9df78e2..97c2d8d 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -702,7 +702,7 @@ static void atari_proc_infos(unsigned char *nvram, struct seq_file *seq, seq_printf(seq, "%ds%s\n", nvram[10], nvram[10] < 8 ? ", no memory test" : ""); - vmode = (nvram[14] << 8) || nvram[15]; + vmode = (nvram[14] << 8) | nvram[15]; seq_printf(seq, "Video mode : %s colors, %d columns, %s %s monitor\n", colors[vmode & 7], -- cgit v1.1 From bab383de3b84e584b0f09227151020b2a43dc34c Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 20 Jul 2015 17:27:21 +0530 Subject: auxdisplay: ks0108: fix refcount parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Cc: # 2.6.32+ Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/ks0108.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index 5b93852..0d75285 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -139,6 +139,7 @@ static int __init ks0108_init(void) ks0108_pardevice = parport_register_device(ks0108_parport, KS0108_NAME, NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + parport_put_port(ks0108_parport); if (ks0108_pardevice == NULL) { printk(KERN_ERR KS0108_NAME ": ERROR: " "parport didn't register new device\n"); -- cgit v1.1 From 7faad1dfbbe008fe564d94c1b154695fcc13d748 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 20 Jul 2015 17:27:22 +0530 Subject: auxdisplay: ks0108: start using pr_* Start using pr_* macros instead of using printk and in the process define pr_fmt. Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/ks0108.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index 0d75285..30d6d0e 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -23,6 +23,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -132,8 +134,7 @@ static int __init ks0108_init(void) ks0108_parport = parport_find_base(ks0108_port); if (ks0108_parport == NULL) { - printk(KERN_ERR KS0108_NAME ": ERROR: " - "parport didn't find %i port\n", ks0108_port); + pr_err("ERROR: parport didn't find %i port\n", ks0108_port); goto none; } @@ -141,15 +142,14 @@ static int __init ks0108_init(void) NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); parport_put_port(ks0108_parport); if (ks0108_pardevice == NULL) { - printk(KERN_ERR KS0108_NAME ": ERROR: " - "parport didn't register new device\n"); + pr_err("ERROR: parport didn't register new device\n"); goto none; } result = parport_claim(ks0108_pardevice); if (result != 0) { - printk(KERN_ERR KS0108_NAME ": ERROR: " - "can't claim %i parport, maybe in use\n", ks0108_port); + pr_err("ERROR: can't claim %i parport, maybe in use\n", + ks0108_port); ret = result; goto registered; } -- cgit v1.1 From c9efdbe63410984668a4983cc46e31a7b3f0c74e Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 20 Jul 2015 17:27:23 +0530 Subject: auxdisplay: ks0108: use min_t Using min_t() is preffered than using min(). Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/ks0108.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index 30d6d0e..ce00e95 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -92,17 +92,19 @@ void ks0108_displaystate(unsigned char state) void ks0108_startline(unsigned char startline) { - ks0108_writedata(min(startline,(unsigned char)63) | bit(6) | bit(7)); + ks0108_writedata(min_t(unsigned char, startline, 63) | bit(6) | + bit(7)); } void ks0108_address(unsigned char address) { - ks0108_writedata(min(address,(unsigned char)63) | bit(6)); + ks0108_writedata(min_t(unsigned char, address, 63) | bit(6)); } void ks0108_page(unsigned char page) { - ks0108_writedata(min(page,(unsigned char)7) | bit(3) | bit(4) | bit(5) | bit(7)); + ks0108_writedata(min_t(unsigned char, page, 7) | bit(3) | bit(4) | + bit(5) | bit(7)); } EXPORT_SYMBOL_GPL(ks0108_writedata); -- cgit v1.1 From 4edd70c133f3921c594883d8f9da31a7261f8b4f Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 20 Jul 2015 17:27:24 +0530 Subject: auxdisplay: ks0108: use new parport device model Modify auxdisplay driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/ks0108.c | 76 ++++++++++++++++++++++++++++----------------- 1 file changed, 47 insertions(+), 29 deletions(-) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index ce00e95..4c471bd 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -125,51 +125,69 @@ unsigned char ks0108_isinited(void) } EXPORT_SYMBOL_GPL(ks0108_isinited); -/* - * Module Init & Exit - */ - -static int __init ks0108_init(void) +static void ks0108_parport_attach(struct parport *port) { - int result; - int ret = -EINVAL; + struct pardev_cb ks0108_cb; - ks0108_parport = parport_find_base(ks0108_port); - if (ks0108_parport == NULL) { - pr_err("ERROR: parport didn't find %i port\n", ks0108_port); - goto none; - } + if (port->base != ks0108_port) + return; - ks0108_pardevice = parport_register_device(ks0108_parport, KS0108_NAME, - NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); - parport_put_port(ks0108_parport); - if (ks0108_pardevice == NULL) { + memset(&ks0108_cb, 0, sizeof(ks0108_cb)); + ks0108_cb.flags = PARPORT_DEV_EXCL; + ks0108_pardevice = parport_register_dev_model(port, KS0108_NAME, + &ks0108_cb, 0); + if (!ks0108_pardevice) { pr_err("ERROR: parport didn't register new device\n"); - goto none; + return; } - - result = parport_claim(ks0108_pardevice); - if (result != 0) { - pr_err("ERROR: can't claim %i parport, maybe in use\n", + if (parport_claim(ks0108_pardevice)) { + pr_err("could not claim access to parport %i. Aborting.\n", ks0108_port); - ret = result; - goto registered; + goto err_unreg_device; } ks0108_inited = 1; - return 0; + return; -registered: +err_unreg_device: parport_unregister_device(ks0108_pardevice); - -none: - return ret; + ks0108_pardevice = NULL; } -static void __exit ks0108_exit(void) +static void ks0108_parport_detach(struct parport *port) { + if (port->base != ks0108_port) + return; + + if (!ks0108_pardevice) { + pr_err("%s: already unregistered.\n", KS0108_NAME); + return; + } + parport_release(ks0108_pardevice); parport_unregister_device(ks0108_pardevice); + ks0108_pardevice = NULL; +} + +/* + * Module Init & Exit + */ + +static struct parport_driver ks0108_parport_driver = { + .name = "ks0108", + .match_port = ks0108_parport_attach, + .detach = ks0108_parport_detach, + .devmodel = true, +}; + +static int __init ks0108_init(void) +{ + return parport_register_driver(&ks0108_parport_driver); +} + +static void __exit ks0108_exit(void) +{ + parport_unregister_driver(&ks0108_parport_driver); } module_init(ks0108_init); -- cgit v1.1 From eace75cfdcf7d9937d8c1fb226780123c64d72c4 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:13:19 +0100 Subject: nvmem: Add a simple NVMEM framework for nvmem providers This patch adds just providers part of the framework just to enable easy review. Up until now, NVMEM drivers like eeprom were stored in drivers/misc, where they all had to duplicate pretty much the same code to register a sysfs file, allow in-kernel users to access the content of the devices they were driving, etc. This was also a problem as far as other in-kernel users were involved, since the solutions used were pretty much different from on driver to another, there was a rather big abstraction leak. This introduction of this framework aims at solving this. It also introduces DT representation for consumer devices to go get the data they require (MAC Addresses, SoC/Revision ID, part numbers, and so on) from the nvmems. Having regmap interface to this framework would give much better abstraction for nvmems on different buses. Signed-off-by: Maxime Ripard [Maxime Ripard: intial version of eeprom framework] Signed-off-by: Srinivas Kandagatla Tested-by: Stefan Wahren Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/nvmem/Kconfig | 13 ++ drivers/nvmem/Makefile | 6 + drivers/nvmem/core.c | 406 +++++++++++++++++++++++++++++++++++++++++ include/linux/nvmem-consumer.h | 23 +++ include/linux/nvmem-provider.h | 47 +++++ 7 files changed, 498 insertions(+) create mode 100644 drivers/nvmem/Kconfig create mode 100644 drivers/nvmem/Makefile create mode 100644 drivers/nvmem/core.c create mode 100644 include/linux/nvmem-consumer.h create mode 100644 include/linux/nvmem-provider.h diff --git a/drivers/Kconfig b/drivers/Kconfig index 6e973b8..4e2e6aa 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -184,4 +184,6 @@ source "drivers/android/Kconfig" source "drivers/nvdimm/Kconfig" +source "drivers/nvmem/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index b64b49f..4c270f5 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -165,3 +165,4 @@ obj-$(CONFIG_RAS) += ras/ obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-$(CONFIG_ANDROID) += android/ +obj-$(CONFIG_NVMEM) += nvmem/ diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig new file mode 100644 index 0000000..de90c82 --- /dev/null +++ b/drivers/nvmem/Kconfig @@ -0,0 +1,13 @@ +menuconfig NVMEM + tristate "NVMEM Support" + select REGMAP + help + Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... + + This framework is designed to provide a generic interface to NVMEM + from both the Linux Kernel and the userspace. + + This driver can also be built as a module. If so, the module + will be called nvmem_core. + + If unsure, say no. diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile new file mode 100644 index 0000000..6df2c69 --- /dev/null +++ b/drivers/nvmem/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for nvmem drivers. +# + +obj-$(CONFIG_NVMEM) += nvmem_core.o +nvmem_core-y := core.o diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c new file mode 100644 index 0000000..2b02491 --- /dev/null +++ b/drivers/nvmem/core.c @@ -0,0 +1,406 @@ +/* + * nvmem framework core. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct nvmem_device { + const char *name; + struct regmap *regmap; + struct module *owner; + struct device dev; + int stride; + int word_size; + int ncells; + int id; + int users; + size_t size; + bool read_only; +}; + +struct nvmem_cell { + const char *name; + int offset; + int bytes; + int bit_offset; + int nbits; + struct nvmem_device *nvmem; + struct list_head node; +}; + +static DEFINE_MUTEX(nvmem_mutex); +static DEFINE_IDA(nvmem_ida); + +static LIST_HEAD(nvmem_cells); +static DEFINE_MUTEX(nvmem_cells_mutex); + +#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev) + +static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from reading */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_read(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from writing */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_write(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +/* default read/write permissions */ +static struct bin_attribute bin_attr_rw_nvmem = { + .attr = { + .name = "nvmem", + .mode = S_IWUSR | S_IRUGO, + }, + .read = bin_attr_nvmem_read, + .write = bin_attr_nvmem_write, +}; + +static struct bin_attribute *nvmem_bin_rw_attributes[] = { + &bin_attr_rw_nvmem, + NULL, +}; + +static const struct attribute_group nvmem_bin_rw_group = { + .bin_attrs = nvmem_bin_rw_attributes, +}; + +static const struct attribute_group *nvmem_rw_dev_groups[] = { + &nvmem_bin_rw_group, + NULL, +}; + +/* read only permission */ +static struct bin_attribute bin_attr_ro_nvmem = { + .attr = { + .name = "nvmem", + .mode = S_IRUGO, + }, + .read = bin_attr_nvmem_read, +}; + +static struct bin_attribute *nvmem_bin_ro_attributes[] = { + &bin_attr_ro_nvmem, + NULL, +}; + +static const struct attribute_group nvmem_bin_ro_group = { + .bin_attrs = nvmem_bin_ro_attributes, +}; + +static const struct attribute_group *nvmem_ro_dev_groups[] = { + &nvmem_bin_ro_group, + NULL, +}; + +static void nvmem_release(struct device *dev) +{ + struct nvmem_device *nvmem = to_nvmem_device(dev); + + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); +} + +static const struct device_type nvmem_provider_type = { + .release = nvmem_release, +}; + +static struct bus_type nvmem_bus_type = { + .name = "nvmem", +}; + +static int of_nvmem_match(struct device *dev, void *nvmem_np) +{ + return dev->of_node == nvmem_np; +} + +static struct nvmem_device *of_nvmem_find(struct device_node *nvmem_np) +{ + struct device *d; + + if (!nvmem_np) + return NULL; + + d = bus_find_device(&nvmem_bus_type, NULL, nvmem_np, of_nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +static struct nvmem_cell *nvmem_find_cell(const char *cell_id) +{ + struct nvmem_cell *p; + + list_for_each_entry(p, &nvmem_cells, node) + if (p && !strcmp(p->name, cell_id)) + return p; + + return NULL; +} + +static void nvmem_cell_drop(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_del(&cell->node); + mutex_unlock(&nvmem_cells_mutex); + kfree(cell); +} + +static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem) +{ + struct nvmem_cell *cell; + struct list_head *p, *n; + + list_for_each_safe(p, n, &nvmem_cells) { + cell = list_entry(p, struct nvmem_cell, node); + if (cell->nvmem == nvmem) + nvmem_cell_drop(cell); + } +} + +static void nvmem_cell_add(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_add_tail(&cell->node, &nvmem_cells); + mutex_unlock(&nvmem_cells_mutex); +} + +static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info, + struct nvmem_cell *cell) +{ + cell->nvmem = nvmem; + cell->offset = info->offset; + cell->bytes = info->bytes; + cell->name = info->name; + + cell->bit_offset = info->bit_offset; + cell->nbits = info->nbits; + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + return -EINVAL; + } + + return 0; +} + +static int nvmem_add_cells(struct nvmem_device *nvmem, + const struct nvmem_config *cfg) +{ + struct nvmem_cell **cells; + const struct nvmem_cell_info *info = cfg->cells; + int i, rval; + + cells = kcalloc(cfg->ncells, sizeof(*cells), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + for (i = 0; i < cfg->ncells; i++) { + cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL); + if (!cells[i]) { + rval = -ENOMEM; + goto err; + } + + rval = nvmem_cell_info_to_nvmem_cell(nvmem, &info[i], cells[i]); + if (IS_ERR_VALUE(rval)) { + kfree(cells[i]); + goto err; + } + + nvmem_cell_add(cells[i]); + } + + nvmem->ncells = cfg->ncells; + /* remove tmp array */ + kfree(cells); + + return 0; +err: + while (--i) + nvmem_cell_drop(cells[i]); + + return rval; +} + +/** + * nvmem_register() - Register a nvmem device for given nvmem_config. + * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem + * + * @config: nvmem device configuration with which nvmem device is created. + * + * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device + * on success. + */ + +struct nvmem_device *nvmem_register(const struct nvmem_config *config) +{ + struct nvmem_device *nvmem; + struct device_node *np; + struct regmap *rm; + int rval; + + if (!config->dev) + return ERR_PTR(-EINVAL); + + rm = dev_get_regmap(config->dev, NULL); + if (!rm) { + dev_err(config->dev, "Regmap not found\n"); + return ERR_PTR(-EINVAL); + } + + nvmem = kzalloc(sizeof(*nvmem), GFP_KERNEL); + if (!nvmem) + return ERR_PTR(-ENOMEM); + + rval = ida_simple_get(&nvmem_ida, 0, 0, GFP_KERNEL); + if (rval < 0) { + kfree(nvmem); + return ERR_PTR(rval); + } + + nvmem->id = rval; + nvmem->regmap = rm; + nvmem->owner = config->owner; + nvmem->stride = regmap_get_reg_stride(rm); + nvmem->word_size = regmap_get_val_bytes(rm); + nvmem->size = regmap_get_max_register(rm) + nvmem->stride; + nvmem->dev.type = &nvmem_provider_type; + nvmem->dev.bus = &nvmem_bus_type; + nvmem->dev.parent = config->dev; + np = config->dev->of_node; + nvmem->dev.of_node = np; + dev_set_name(&nvmem->dev, "%s%d", + config->name ? : "nvmem", config->id); + + nvmem->read_only = of_property_read_bool(np, "read-only") | + config->read_only; + + nvmem->dev.groups = nvmem->read_only ? nvmem_ro_dev_groups : + nvmem_rw_dev_groups; + + device_initialize(&nvmem->dev); + + dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name); + + rval = device_add(&nvmem->dev); + if (rval) { + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); + return ERR_PTR(rval); + } + + if (config->cells) + nvmem_add_cells(nvmem, config); + + return nvmem; +} +EXPORT_SYMBOL_GPL(nvmem_register); + +/** + * nvmem_unregister() - Unregister previously registered nvmem device + * + * @nvmem: Pointer to previously registered nvmem device. + * + * Return: Will be an negative on error or a zero on success. + */ +int nvmem_unregister(struct nvmem_device *nvmem) +{ + if (nvmem->users) + return -EBUSY; + + nvmem_device_remove_all_cells(nvmem); + device_del(&nvmem->dev); + + return 0; +} +EXPORT_SYMBOL_GPL(nvmem_unregister); + +static int __init nvmem_init(void) +{ + return bus_register(&nvmem_bus_type); +} + +static void __exit nvmem_exit(void) +{ + bus_unregister(&nvmem_bus_type); +} + +subsys_initcall(nvmem_init); +module_exit(nvmem_exit); + +MODULE_AUTHOR("Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_CONSUMER_H +#define _LINUX_NVMEM_CONSUMER_H + +struct nvmem_cell_info { + const char *name; + unsigned int offset; + unsigned int bytes; + unsigned int bit_offset; + unsigned int nbits; +}; + +#endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h new file mode 100644 index 0000000..0b68caf --- /dev/null +++ b/include/linux/nvmem-provider.h @@ -0,0 +1,47 @@ +/* + * nvmem framework provider. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_PROVIDER_H +#define _LINUX_NVMEM_PROVIDER_H + +struct nvmem_device; +struct nvmem_cell_info; + +struct nvmem_config { + struct device *dev; + const char *name; + int id; + struct module *owner; + const struct nvmem_cell_info *cells; + int ncells; + bool read_only; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +struct nvmem_device *nvmem_register(const struct nvmem_config *cfg); +int nvmem_unregister(struct nvmem_device *nvmem); + +#else + +static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_unregister(struct nvmem_device *nvmem) +{ + return -ENOSYS; +} + +#endif /* CONFIG_NVMEM */ + +#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ -- cgit v1.1 From 69aba7948cbe53f2f1827e84e9dd0ae470a5072e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:13:34 +0100 Subject: nvmem: Add a simple NVMEM framework for consumers This patch adds just consumers part of the framework just to enable easy review. Up until now, nvmem drivers were stored in drivers/misc, where they all had to duplicate pretty much the same code to register a sysfs file, allow in-kernel users to access the content of the devices they were driving, etc. This was also a problem as far as other in-kernel users were involved, since the solutions used were pretty much different from on driver to another, there was a rather big abstraction leak. This introduction of this framework aims at solving this. It also introduces DT representation for consumer devices to go get the data they require (MAC Addresses, SoC/Revision ID, part numbers, and so on) from the nvmems. Having regmap interface to this framework would give much better abstraction for nvmems on different buses. Signed-off-by: Maxime Ripard [Maxime Ripard: intial version of the framework] Signed-off-by: Srinivas Kandagatla Tested-by: Stefan Wahren Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 421 ++++++++++++++++++++++++++++++++++++++++- include/linux/nvmem-consumer.h | 61 ++++++ 2 files changed, 481 insertions(+), 1 deletion(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 2b02491..8c16ae2 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -377,8 +377,12 @@ EXPORT_SYMBOL_GPL(nvmem_register); */ int nvmem_unregister(struct nvmem_device *nvmem) { - if (nvmem->users) + mutex_lock(&nvmem_mutex); + if (nvmem->users) { + mutex_unlock(&nvmem_mutex); return -EBUSY; + } + mutex_unlock(&nvmem_mutex); nvmem_device_remove_all_cells(nvmem); device_del(&nvmem->dev); @@ -387,6 +391,421 @@ int nvmem_unregister(struct nvmem_device *nvmem) } EXPORT_SYMBOL_GPL(nvmem_unregister); +static struct nvmem_device *__nvmem_device_get(struct device_node *np, + struct nvmem_cell **cellp, + const char *cell_id) +{ + struct nvmem_device *nvmem = NULL; + + mutex_lock(&nvmem_mutex); + + if (np) { + nvmem = of_nvmem_find(np); + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-EPROBE_DEFER); + } + } else { + struct nvmem_cell *cell = nvmem_find_cell(cell_id); + + if (cell) { + nvmem = cell->nvmem; + *cellp = cell; + } + + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-ENOENT); + } + } + + nvmem->users++; + mutex_unlock(&nvmem_mutex); + + if (!try_module_get(nvmem->owner)) { + dev_err(&nvmem->dev, + "could not increase module refcount for cell %s\n", + nvmem->name); + + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); + + return ERR_PTR(-EINVAL); + } + + return nvmem; +} + +static void __nvmem_device_put(struct nvmem_device *nvmem) +{ + module_put(nvmem->owner); + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); +} + +static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id) +{ + struct nvmem_cell *cell = NULL; + struct nvmem_device *nvmem; + + nvmem = __nvmem_device_get(NULL, &cell, cell_id); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + return cell; +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name from nvmem-cell-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + struct device_node *cell_np, *nvmem_np; + struct nvmem_cell *cell; + struct nvmem_device *nvmem; + const __be32 *addr; + int rval, len, index; + + index = of_property_match_string(np, "nvmem-cell-names", name); + + cell_np = of_parse_phandle(np, "nvmem-cells", index); + if (!cell_np) + return ERR_PTR(-EINVAL); + + nvmem_np = of_get_next_parent(cell_np); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + nvmem = __nvmem_device_get(nvmem_np, NULL, NULL); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + addr = of_get_property(cell_np, "reg", &len); + if (!addr || (len < 2 * sizeof(u32))) { + dev_err(&nvmem->dev, "nvmem: invalid reg on %s\n", + cell_np->full_name); + rval = -EINVAL; + goto err_mem; + } + + cell = kzalloc(sizeof(*cell), GFP_KERNEL); + if (!cell) { + rval = -ENOMEM; + goto err_mem; + } + + cell->nvmem = nvmem; + cell->offset = be32_to_cpup(addr++); + cell->bytes = be32_to_cpup(addr); + cell->name = cell_np->name; + + addr = of_get_property(cell_np, "bits", &len); + if (addr && len == (2 * sizeof(u32))) { + cell->bit_offset = be32_to_cpup(addr++); + cell->nbits = be32_to_cpup(addr); + } + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + rval = -EINVAL; + goto err_sanity; + } + + nvmem_cell_add(cell); + + return cell; + +err_sanity: + kfree(cell); + +err_mem: + __nvmem_device_put(nvmem); + + return ERR_PTR(rval); +} +EXPORT_SYMBOL_GPL(of_nvmem_cell_get); +#endif + +/** + * nvmem_cell_get() - Get nvmem cell of device form a given cell name + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name to get. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id) +{ + struct nvmem_cell *cell; + + if (dev->of_node) { /* try dt first */ + cell = of_nvmem_cell_get(dev->of_node, cell_id); + if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER) + return cell; + } + + return nvmem_cell_get_from_list(cell_id); +} +EXPORT_SYMBOL_GPL(nvmem_cell_get); + +static void devm_nvmem_cell_release(struct device *dev, void *res) +{ + nvmem_cell_put(*(struct nvmem_cell **)res); +} + +/** + * devm_nvmem_cell_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem id in nvmem-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * automatically once the device is freed. + */ +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *id) +{ + struct nvmem_cell **ptr, *cell; + + ptr = devres_alloc(devm_nvmem_cell_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + cell = nvmem_cell_get(dev, id); + if (!IS_ERR(cell)) { + *ptr = cell; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return cell; +} +EXPORT_SYMBOL_GPL(devm_nvmem_cell_get); + +static int devm_nvmem_cell_match(struct device *dev, void *res, void *data) +{ + struct nvmem_cell **c = res; + + if (WARN_ON(!c || !*c)) + return 0; + + return *c == data; +} + +/** + * devm_nvmem_cell_put() - Release previously allocated nvmem cell + * from devm_nvmem_cell_get. + * + * @cell: Previously allocated nvmem cell by devm_nvmem_cell_get() + */ +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_cell_release, + devm_nvmem_cell_match, cell); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_nvmem_cell_put); + +/** + * nvmem_cell_put() - Release previously allocated nvmem cell. + * + * @cell: Previously allocated nvmem cell by nvmem_cell_get() + */ +void nvmem_cell_put(struct nvmem_cell *cell) +{ + struct nvmem_device *nvmem = cell->nvmem; + + __nvmem_device_put(nvmem); + nvmem_cell_drop(cell); +} +EXPORT_SYMBOL_GPL(nvmem_cell_put); + +static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, + void *buf) +{ + u8 *p, *b; + int i, bit_offset = cell->bit_offset; + + p = b = buf; + if (bit_offset) { + /* First shift */ + *b++ >>= bit_offset; + + /* setup rest of the bytes if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get bits from next byte and shift them towards msb */ + *p |= *b << (BITS_PER_BYTE - bit_offset); + + p = b; + *b++ >>= bit_offset; + } + + /* result fits in less bytes */ + if (cell->bytes != DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE)) + *p-- = 0; + } + /* clear msb bits if any leftover in the last byte */ + *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); +} + +static int __nvmem_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell *cell, + void *buf, size_t *len) +{ + int rc; + + rc = regmap_raw_read(nvmem->regmap, cell->offset, buf, cell->bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + /* shift bits in-place */ + if (cell->bit_offset || cell->bit_offset) + nvmem_shift_read_buffer_in_place(cell, buf); + + *len = cell->bytes; + + return 0; +} + +/** + * nvmem_cell_read() - Read a given nvmem cell + * + * @cell: nvmem cell to be read. + * @len: pointer to length of cell which will be populated on successful read. + * + * Return: ERR_PTR() on error or a valid pointer to a char * buffer on success. + * The buffer should be freed by the consumer with a kfree(). + */ +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + struct nvmem_device *nvmem = cell->nvmem; + u8 *buf; + int rc; + + if (!nvmem || !nvmem->regmap) + return ERR_PTR(-EINVAL); + + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + rc = __nvmem_cell_read(nvmem, cell, buf, len); + if (IS_ERR_VALUE(rc)) { + kfree(buf); + return ERR_PTR(rc); + } + + return buf; +} +EXPORT_SYMBOL_GPL(nvmem_cell_read); + +static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell, + u8 *_buf, int len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int i, rc, nbits, bit_offset = cell->bit_offset; + u8 v, *p, *buf, *b, pbyte, pbits; + + nbits = cell->nbits; + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + memcpy(buf, _buf, len); + p = b = buf; + + if (bit_offset) { + pbyte = *b; + *b <<= bit_offset; + + /* setup the first byte with lsb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, cell->offset, &v, 1); + *b++ |= GENMASK(bit_offset - 1, 0) & v; + + /* setup rest of the byte if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get last byte bits and shift them towards lsb */ + pbits = pbyte >> (BITS_PER_BYTE - 1 - bit_offset); + pbyte = *b; + p = b; + *b <<= bit_offset; + *b++ |= pbits; + } + } + + /* if it's not end on byte boundary */ + if ((nbits + bit_offset) % BITS_PER_BYTE) { + /* setup the last byte with msb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, + cell->offset + cell->bytes - 1, &v, 1); + *p |= GENMASK(7, (nbits + bit_offset) % BITS_PER_BYTE) & v; + + } + + return buf; +} + +/** + * nvmem_cell_write() - Write to a given nvmem cell + * + * @cell: nvmem cell to be written. + * @buf: Buffer to be written. + * @len: length of buffer to be written to nvmem cell. + * + * Return: length of bytes written or negative on failure. + */ +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int rc; + + if (!nvmem || !nvmem->regmap || nvmem->read_only || + (cell->bit_offset == 0 && len != cell->bytes)) + return -EINVAL; + + if (cell->bit_offset || cell->nbits) { + buf = nvmem_cell_prepare_write_buffer(cell, buf, len); + if (IS_ERR(buf)) + return PTR_ERR(buf); + } + + rc = regmap_raw_write(nvmem->regmap, cell->offset, buf, cell->bytes); + + /* free the tmp buffer */ + if (cell->bit_offset) + kfree(buf); + + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_cell_write); + static int __init nvmem_init(void) { return bus_register(&nvmem_bus_type); diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 1e9e767..297cc67 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -12,6 +12,11 @@ #ifndef _LINUX_NVMEM_CONSUMER_H #define _LINUX_NVMEM_CONSUMER_H +struct device; +struct device_node; +/* consumer cookie */ +struct nvmem_cell; + struct nvmem_cell_info { const char *name; unsigned int offset; @@ -20,4 +25,60 @@ struct nvmem_cell_info { unsigned int nbits; }; +#if IS_ENABLED(CONFIG_NVMEM) + +/* Cell based interface */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len); + +#else + +static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void devm_nvmem_cell_put(struct device *dev, + struct nvmem_cell *cell) +{ + +} +static inline void nvmem_cell_put(struct nvmem_cell *cell) +{ +} + +static inline char *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_cell_write(struct nvmem_cell *cell, + const char *buf, size_t len) +{ + return -ENOSYS; +} +#endif /* CONFIG_NVMEM */ + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name); +#else +static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} +#endif /* CONFIG_NVMEM && CONFIG_OF */ + #endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ -- cgit v1.1 From e2a5402ec7c6d0442cca370a0097e75750f81398 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:13:45 +0100 Subject: nvmem: Add nvmem_device based consumer apis. This patch adds read/write apis which are based on nvmem_device. It is common that the drivers like omap cape manager or qcom cpr driver to access bytes directly at particular offset in the eeprom and not from nvmem cell info in DT. These driver would need to get access to the nvmem directly, which is what these new APIS provide. These wrapper apis would help such users to avoid code duplication in there drivers and also avoid them reading a big eeprom blob and parsing it internally in there driver. Signed-off-by: Srinivas Kandagatla Tested-by: Stefan Wahren Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 258 +++++++++++++++++++++++++++++++++++++++++ include/linux/nvmem-consumer.h | 73 ++++++++++++ 2 files changed, 331 insertions(+) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 8c16ae2..d3c6676 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -445,6 +445,148 @@ static void __nvmem_device_put(struct nvmem_device *nvmem) mutex_unlock(&nvmem_mutex); } +static int nvmem_match(struct device *dev, void *data) +{ + return !strcmp(dev_name(dev), data); +} + +static struct nvmem_device *nvmem_find(const char *name) +{ + struct device *d; + + d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_device_get() - Get nvmem device from a given id + * + * @dev node: Device tree node that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id) +{ + + struct device_node *nvmem_np; + int index; + + index = of_property_match_string(np, "nvmem-names", id); + + nvmem_np = of_parse_phandle(np, "nvmem", index); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + return __nvmem_device_get(nvmem_np, NULL, NULL); +} +EXPORT_SYMBOL_GPL(of_nvmem_device_get); +#endif + +/** + * nvmem_device_get() - Get nvmem device from a given id + * + * @dev : Device that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name) +{ + if (dev->of_node) { /* try dt first */ + struct nvmem_device *nvmem; + + nvmem = of_nvmem_device_get(dev->of_node, dev_name); + + if (!IS_ERR(nvmem) || PTR_ERR(nvmem) == -EPROBE_DEFER) + return nvmem; + + } + + return nvmem_find(dev_name); +} +EXPORT_SYMBOL_GPL(nvmem_device_get); + +static int devm_nvmem_device_match(struct device *dev, void *res, void *data) +{ + struct nvmem_device **nvmem = res; + + if (WARN_ON(!nvmem || !*nvmem)) + return 0; + + return *nvmem == data; +} + +static void devm_nvmem_device_release(struct device *dev, void *res) +{ + nvmem_device_put(*(struct nvmem_device **)res); +} + +/** + * devm_nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device allocated by devm_nvmem_cell_get(), + * that needs to be released. + */ +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_device_release, + devm_nvmem_device_match, nvmem); + + WARN_ON(ret); +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_put); + +/** + * nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device that needs to be released. + */ +void nvmem_device_put(struct nvmem_device *nvmem) +{ + __nvmem_device_put(nvmem); +} +EXPORT_SYMBOL_GPL(nvmem_device_put); + +/** + * devm_nvmem_device_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem name in nvmems property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell + * on success. The nvmem_cell will be freed by the automatically once the + * device is freed. + */ +struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id) +{ + struct nvmem_device **ptr, *nvmem; + + ptr = devres_alloc(devm_nvmem_device_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + nvmem = nvmem_device_get(dev, id); + if (!IS_ERR(nvmem)) { + *ptr = nvmem; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return nvmem; +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_get); + static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id) { struct nvmem_cell *cell = NULL; @@ -806,6 +948,122 @@ int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len) } EXPORT_SYMBOL_GPL(nvmem_cell_write); +/** + * nvmem_device_cell_read() - Read a given nvmem device and cell + * + * @nvmem: nvmem device to read from. + * @info: nvmem cell info to be read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + ssize_t len; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + rc = __nvmem_cell_read(nvmem, &cell, buf, &len); + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_read); + +/** + * nvmem_device_cell_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @info: nvmem cell info to be written + * @buf: buffer to be written to cell. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + return nvmem_cell_write(&cell, buf, cell.bytes); +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_write); + +/** + * nvmem_device_read() - Read from a given nvmem device + * + * @nvmem: nvmem device to read from. + * @offset: offset in nvmem device. + * @bytes: number of bytes to read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_read(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_read); + +/** + * nvmem_device_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @offset: offset in nvmem device. + * @bytes: number of bytes to write. + * @buf: buffer to be written. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_write(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_write); + static int __init nvmem_init(void) { return bus_register(&nvmem_bus_type); diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 297cc67..9bb77d3 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -16,6 +16,7 @@ struct device; struct device_node; /* consumer cookie */ struct nvmem_cell; +struct nvmem_device; struct nvmem_cell_info { const char *name; @@ -35,6 +36,21 @@ void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len); int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len); +/* direct nvmem device read/write interface */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + #else static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, @@ -68,17 +84,74 @@ static inline int nvmem_cell_write(struct nvmem_cell *cell, { return -ENOSYS; } + +static inline struct nvmem_device *nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void nvmem_device_put(struct nvmem_device *nvmem) +{ +} + +static inline void devm_nvmem_device_put(struct device *dev, + struct nvmem_device *nvmem) +{ +} + +static inline ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} #endif /* CONFIG_NVMEM */ #if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *name); +struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name); #else static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *name) { return ERR_PTR(-ENOSYS); } + +static inline struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} #endif /* CONFIG_NVMEM && CONFIG_OF */ #endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ -- cgit v1.1 From 2af38ab572b031a4111f01153cc020b1038b427b Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:13:58 +0100 Subject: nvmem: Add bindings for simple nvmem framework This patch adds bindings for simple nvmem framework which allows nvmem consumers to talk to nvmem providers to get access to nvmem cell data. Signed-off-by: Maxime Ripard [Maxime Ripard: intial version of eeprom framework] Signed-off-by: Srinivas Kandagatla Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/nvmem/nvmem.txt | 80 +++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/nvmem.txt diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 0000000..b52bc11 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; -- cgit v1.1 From 354ebb541dfa37a83395e5a9b7d68c34f80fffc0 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:14:14 +0100 Subject: Documentation: nvmem: add nvmem api level and how-to doc This patch add basic how-to and api summary documentation for simple NVMEM framework. Signed-off-by: Srinivas Kandagatla Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- Documentation/nvmem/nvmem.txt | 152 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 Documentation/nvmem/nvmem.txt diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt new file mode 100644 index 0000000..dbd40d8 --- /dev/null +++ b/Documentation/nvmem/nvmem.txt @@ -0,0 +1,152 @@ + NVMEM SUBSYSTEM + Srinivas Kandagatla + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case: + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_probe(struct platform_device *pdev) +{ + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... +} + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells. + +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + +void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +*nvmem_cell_get() apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call *nvmem_cell_put() +to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis. + +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the *nvmem_device_get() api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumers no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM. + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at +/sys/bus/nvmem/devices/*/nvmem + +ex: + +hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +... +* +0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt -- cgit v1.1 From 4ab11996b489ad65092216315484824ed32018f8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:15:00 +0100 Subject: nvmem: qfprom: Add Qualcomm QFPROM support. This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Stephen Boyd Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/Kconfig | 15 +++++++++ drivers/nvmem/Makefile | 4 +++ drivers/nvmem/qfprom.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 104 insertions(+) create mode 100644 drivers/nvmem/qfprom.c diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index de90c82..fa85805 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -11,3 +11,18 @@ menuconfig NVMEM will be called nvmem_core. If unsure, say no. + +if NVMEM + +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on ARCH_QCOM || COMPILE_TEST + select REGMAP_MMIO + help + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via nvmem interface. + + This driver can also be built as a module. If so, the module + will be called nvmem_qfprom. + +endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 6df2c69..ff44fe9 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -4,3 +4,7 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o nvmem_core-y := core.o + +# Devices +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o +nvmem_qfprom-y := qfprom.o diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c new file mode 100644 index 0000000..afb67e7 --- /dev/null +++ b/drivers/nvmem/qfprom.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2015 Srinivas Kandagatla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +static struct regmap_config qfprom_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static int qfprom_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + qfprom_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init_mmio(dev, base, &qfprom_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static const struct of_device_id qfprom_of_match[] = { + { .compatible = "qcom,qfprom",}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, qfprom_of_match); + +static struct platform_driver qfprom_driver = { + .probe = qfprom_probe, + .remove = qfprom_remove, + .driver = { + .name = "qcom,qfprom", + .of_match_table = qfprom_of_match, + }, +}; +module_platform_driver(qfprom_driver); +MODULE_AUTHOR("Srinivas Kandagatla "); +MODULE_DESCRIPTION("Qualcomm QFPROM driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1 From b470d6d7a5dfe41112d55c39eac67ddc5afac80d Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:16:59 +0100 Subject: nvmem: qfprom: Add bindings for qfprom This patch adds bindings for qfprom found in QCOM SOCs. QFPROM driver is based on simple nvmem framework. Signed-off-by: Srinivas Kandagatla Reviewed-by: Stephen Boyd Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/nvmem/qfprom.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 0000000..4ad68b7 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; -- cgit v1.1 From 3d0b16a66c8a9d10294572c6f79df4f15a27825d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 Jul 2015 12:17:09 +0100 Subject: nvmem: sunxi: Move the SID driver to the nvmem framework Now that we have the nvmem framework, we can consolidate the common driver code. Move the driver to the framework, and hopefully, it will fix the sysfs file creation race. Signed-off-by: Maxime Ripard [srinivas.kandagatla: Moved to regmap based EEPROM framework] Signed-off-by: Srinivas Kandagatla Tested-by: Philipp Zabel Tested-by: Rajendra Nayak Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-driver-sunxi-sid | 22 --- .../bindings/misc/allwinner,sunxi-sid.txt | 17 -- .../bindings/nvmem/allwinner,sunxi-sid.txt | 21 +++ drivers/misc/eeprom/Kconfig | 13 -- drivers/misc/eeprom/Makefile | 1 - drivers/misc/eeprom/sunxi_sid.c | 156 ------------------- drivers/nvmem/Kconfig | 11 ++ drivers/nvmem/Makefile | 2 + drivers/nvmem/sunxi_sid.c | 171 +++++++++++++++++++++ 9 files changed, 205 insertions(+), 209 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-driver-sunxi-sid delete mode 100644 Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt create mode 100644 Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt delete mode 100644 drivers/misc/eeprom/sunxi_sid.c create mode 100644 drivers/nvmem/sunxi_sid.c diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536..0000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*//eeprom -Date: August 2013 -Contact: Oliver Schinagl -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt deleted file mode 100644 index fabdf64..0000000 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ /dev/null @@ -1,17 +0,0 @@ -Allwinner sunxi-sid - -Required properties: -- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" -- reg: Should contain registers location and length - -Example for sun4i: - sid@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10> - }; - -Example for sun7i: - sid@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200> - }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt new file mode 100644 index 0000000..d543ed3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -0,0 +1,21 @@ +Allwinner sunxi-sid + +Required properties: +- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example for sun4i: + sid@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10> + }; + +Example for sun7i: + sid@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200> + }; diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 9536852f..04f2e1f 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -96,17 +96,4 @@ config EEPROM_DIGSY_MTC_CFG If unsure, say N. -config EEPROM_SUNXI_SID - tristate "Allwinner sunxi security ID support" - depends on ARCH_SUNXI && SYSFS - help - This is a driver for the 'security ID' available on various Allwinner - devices. - - Due to the potential risks involved with changing e-fuses, - this driver is read-only. - - This driver can also be built as a module. If so, the module - will be called sunxi_sid. - endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 9507aec..fc1e81d 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -4,5 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o -obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c deleted file mode 100644 index 8385177..0000000 --- a/drivers/misc/eeprom/sunxi_sid.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (c) 2013 Oliver Schinagl - * http://www.linux-sunxi.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver exposes the Allwinner security ID, efuses exported in byte- - * sized chunks. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sunxi-sid" - -struct sunxi_sid_data { - void __iomem *reg_base; - unsigned int keysize; -}; - -/* We read the entire key, due to a 32 bit read alignment requirement. Since we - * want to return the requested byte, this results in somewhat slower code and - * uses 4 times more reads as needed but keeps code simpler. Since the SID is - * only very rarely probed, this is not really an issue. - */ -static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data, - const unsigned int offset) -{ - u32 sid_key; - - if (offset >= sid_data->keysize) - return 0; - - sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4)); - sid_key >>= (offset % 4) * 8; - - return sid_key; /* Only return the last byte */ -} - -static ssize_t sid_read(struct file *fd, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t pos, size_t size) -{ - struct platform_device *pdev; - struct sunxi_sid_data *sid_data; - int i; - - pdev = to_platform_device(kobj_to_dev(kobj)); - sid_data = platform_get_drvdata(pdev); - - if (pos < 0 || pos >= sid_data->keysize) - return 0; - if (size > sid_data->keysize - pos) - size = sid_data->keysize - pos; - - for (i = 0; i < size; i++) - buf[i] = sunxi_sid_read_byte(sid_data, pos + i); - - return i; -} - -static struct bin_attribute sid_bin_attr = { - .attr = { .name = "eeprom", .mode = S_IRUGO, }, - .read = sid_read, -}; - -static int sunxi_sid_remove(struct platform_device *pdev) -{ - device_remove_bin_file(&pdev->dev, &sid_bin_attr); - dev_dbg(&pdev->dev, "driver unloaded\n"); - - return 0; -} - -static const struct of_device_id sunxi_sid_of_match[] = { - { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16}, - { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); - -static int sunxi_sid_probe(struct platform_device *pdev) -{ - struct sunxi_sid_data *sid_data; - struct resource *res; - const struct of_device_id *of_dev_id; - u8 *entropy; - unsigned int i; - - sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data), - GFP_KERNEL); - if (!sid_data) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(sid_data->reg_base)) - return PTR_ERR(sid_data->reg_base); - - of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev); - if (!of_dev_id) - return -ENODEV; - sid_data->keysize = (int)of_dev_id->data; - - platform_set_drvdata(pdev, sid_data); - - sid_bin_attr.size = sid_data->keysize; - if (device_create_bin_file(&pdev->dev, &sid_bin_attr)) - return -ENODEV; - - entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL); - for (i = 0; i < sid_data->keysize; i++) - entropy[i] = sunxi_sid_read_byte(sid_data, i); - add_device_randomness(entropy, sid_data->keysize); - kfree(entropy); - - dev_dbg(&pdev->dev, "loaded\n"); - - return 0; -} - -static struct platform_driver sunxi_sid_driver = { - .probe = sunxi_sid_probe, - .remove = sunxi_sid_remove, - .driver = { - .name = DRV_NAME, - .of_match_table = sunxi_sid_of_match, - }, -}; -module_platform_driver(sunxi_sid_driver); - -MODULE_AUTHOR("Oliver Schinagl "); -MODULE_DESCRIPTION("Allwinner sunxi security id driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index fa85805..8db2978 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -25,4 +25,15 @@ config QCOM_QFPROM This driver can also be built as a module. If so, the module will be called nvmem_qfprom. +config NVMEM_SUNXI_SID + tristate "Allwinner SoCs SID support" + depends on ARCH_SUNXI + select REGMAP_MMIO + help + This is a driver for the 'security ID' available on various Allwinner + devices. + + This driver can also be built as a module. If so, the module + will be called nvmem_sunxi_sid. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index ff44fe9..4328b93 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -8,3 +8,5 @@ nvmem_core-y := core.o # Devices obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o +nvmem_sunxi_sid-y := sunxi_sid.o diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c new file mode 100644 index 0000000..14777dd --- /dev/null +++ b/drivers/nvmem/sunxi_sid.c @@ -0,0 +1,171 @@ +/* + * Allwinner sunXi SoCs Security ID support. + * + * Copyright (c) 2013 Oliver Schinagl + * Copyright (C) 2014 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +static struct nvmem_config econfig = { + .name = "sunxi-sid", + .read_only = true, + .owner = THIS_MODULE, +}; + +struct sunxi_sid { + void __iomem *base; +}; + +/* We read the entire key, due to a 32 bit read alignment requirement. Since we + * want to return the requested byte, this results in somewhat slower code and + * uses 4 times more reads as needed but keeps code simpler. Since the SID is + * only very rarely probed, this is not really an issue. + */ +static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid, + const unsigned int offset) +{ + u32 sid_key; + + sid_key = ioread32be(sid->base + round_down(offset, 4)); + sid_key >>= (offset % 4) * 8; + + return sid_key; /* Only return the last byte */ +} + +static int sunxi_sid_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct sunxi_sid *sid = context; + unsigned int offset = *(u32 *)reg; + u8 *buf = val; + + while (val_size) { + *buf++ = sunxi_sid_read_byte(sid, offset); + val_size--; + offset++; + } + + return 0; +} + +static int sunxi_sid_write(void *context, const void *data, size_t count) +{ + /* Unimplemented, dummy to keep regmap core happy */ + return 0; +} + +static struct regmap_bus sunxi_sid_bus = { + .read = sunxi_sid_read, + .write = sunxi_sid_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static bool sunxi_sid_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct regmap_config sunxi_sid_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, + .writeable_reg = sunxi_sid_writeable_reg, +}; + +static int sunxi_sid_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + struct sunxi_sid *sid; + int i, size; + char *randomness; + + sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); + if (!sid) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sid->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sid->base)) + return PTR_ERR(sid->base); + + size = resource_size(res) - 1; + sunxi_sid_regmap_config.max_register = size; + + regmap = devm_regmap_init(dev, &sunxi_sid_bus, sid, + &sunxi_sid_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + randomness = kzalloc(sizeof(u8) * size, GFP_KERNEL); + for (i = 0; i < size; i++) + randomness[i] = sunxi_sid_read_byte(sid, i); + + add_device_randomness(randomness, size); + kfree(randomness); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int sunxi_sid_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static const struct of_device_id sunxi_sid_of_match[] = { + { .compatible = "allwinner,sun4i-a10-sid" }, + { .compatible = "allwinner,sun7i-a20-sid" }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); + +static struct platform_driver sunxi_sid_driver = { + .probe = sunxi_sid_probe, + .remove = sunxi_sid_remove, + .driver = { + .name = "eeprom-sunxi-sid", + .of_match_table = sunxi_sid_of_match, + }, +}; +module_platform_driver(sunxi_sid_driver); + +MODULE_AUTHOR("Oliver Schinagl "); +MODULE_DESCRIPTION("Allwinner sunxi security id driver"); +MODULE_LICENSE("GPL"); -- cgit v1.1 From aee4b9bd4505d0a82cae42c35d7d4a0c08725cec Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 12:17:24 +0100 Subject: nvmem: Add to MAINTAINERS for nvmem framework This patch adds MAINTAINERS to nvmem framework. Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index cde3ece..3910bf4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7285,6 +7285,15 @@ S: Supported F: drivers/block/nvme* F: include/linux/nvme.h +NVMEM FRAMEWORK +M: Srinivas Kandagatla +M: Maxime Ripard +S: Maintained +F: drivers/nvmem/ +F: Documentation/devicetree/bindings/nvmem/ +F: include/linux/nvmem-consumer.h +F: include/linux/nvmem-provider.h + NXP-NCI NFC DRIVER M: Clément Perrochaud R: Charles Gorand -- cgit v1.1 From 01c48a59bae36f08ba27ed6bfe789aa0d14ee2a1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 15:38:10 +0900 Subject: w1: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/ds2482.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index a674409..b05e8fe 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -97,7 +97,6 @@ MODULE_DEVICE_TABLE(i2c, ds2482_id); static struct i2c_driver ds2482_driver = { .driver = { - .owner = THIS_MODULE, .name = "ds2482", }, .probe = ds2482_probe, -- cgit v1.1 From e7390d7c52684ea338621eb3826a60e33a2bab9d Mon Sep 17 00:00:00 2001 From: Vaishali Thakkar Date: Tue, 7 Jul 2015 12:23:49 +0530 Subject: w1: Use module_pci_driver Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { pci_unregister_driver(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by: Vaishali Thakkar Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/matrox_w1.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index d8667b0..684bc9d 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -232,16 +232,4 @@ static void matrox_w1_remove(struct pci_dev *pdev) } kfree(dev); } - -static int __init matrox_w1_init(void) -{ - return pci_register_driver(&matrox_w1_pci_driver); -} - -static void __exit matrox_w1_fini(void) -{ - pci_unregister_driver(&matrox_w1_pci_driver); -} - -module_init(matrox_w1_init); -module_exit(matrox_w1_fini); +module_pci_driver(matrox_w1_pci_driver); -- cgit v1.1 From 594069bc3d333101fb187fc708d75d3ef491869a Mon Sep 17 00:00:00 2001 From: Partha Pratim Mukherjee Date: Mon, 27 Jul 2015 16:15:19 -0700 Subject: fs/char_dev.c: fix incorrect documentation for unregister_chrdev_region The current documentation for unregister_chrdev_region says that it return a range of device numbers which is incorrect. Instead it unregister a range of device numbers. Fix the documentation to make this clear. Signed-off-by: Partha Pratim Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/char_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/char_dev.c b/fs/char_dev.c index ea06a3d..24b1425 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -274,7 +274,7 @@ out2: } /** - * unregister_chrdev_region() - return a range of device numbers + * unregister_chrdev_region() - unregister a range of device numbers * @from: the first in the range of numbers to unregister * @count: the number of device numbers to unregister * -- cgit v1.1 From acb921a5a1e5fb2b864be25caf7317531f91a832 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:46 +0300 Subject: misc: cxl: clean up afu_read_config() The sanity checks for overflow are not needed, because this is done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Cc: Ian Munsie Acked-by: Michael Neuling Reviewed-by: Daniel Axtens Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cxl/sysfs.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c index 31f38bc..87cd747 100644 --- a/drivers/misc/cxl/sysfs.c +++ b/drivers/misc/cxl/sysfs.c @@ -443,12 +443,7 @@ static ssize_t afu_read_config(struct file *filp, struct kobject *kobj, struct afu_config_record *cr = to_cr(kobj); struct cxl_afu *afu = to_cxl_afu(container_of(kobj->parent, struct device, kobj)); - u64 i, j, val, size = afu->crs_len; - - if (off > size) - return 0; - if (off + count > size) - count = size - off; + u64 i, j, val; for (i = 0; i < count;) { val = cxl_afu_cr_read64(afu, cr->cr, off & ~0x7); -- cgit v1.1 From 2b6e5ba3d2ed958f6c32bfc84cdab3377e391f02 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:47 +0300 Subject: misc: ds1682: clean up ds1682_eeprom_read() and ds1682_eeprom_write() The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ds1682.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c index b909fb3..c711227 100644 --- a/drivers/misc/ds1682.c +++ b/drivers/misc/ds1682.c @@ -148,12 +148,6 @@ static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj, dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n", buf, off, count); - if (off >= DS1682_EEPROM_SIZE) - return 0; - - if (off + count > DS1682_EEPROM_SIZE) - count = DS1682_EEPROM_SIZE - off; - rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off, count, buf); if (rc < 0) @@ -171,12 +165,6 @@ static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj, dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n", buf, off, count); - if (off >= DS1682_EEPROM_SIZE) - return -ENOSPC; - - if (off + count > DS1682_EEPROM_SIZE) - count = DS1682_EEPROM_SIZE - off; - /* Write out to the device */ if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off, count, buf) < 0) -- cgit v1.1 From b5da83d4a9c929ac197313b5d6c5d771447fb59e Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:48 +0300 Subject: misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/eeprom_93xx46.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index 9ebeacd..a6bd9e3 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -48,13 +48,6 @@ eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); edev = dev_get_drvdata(dev); - if (unlikely(off >= edev->bin.size)) - return 0; - if ((off + count) > edev->bin.size) - count = edev->bin.size - off; - if (unlikely(!count)) - return count; - cmd_addr = OP_READ << edev->addrlen; if (edev->addrlen == 7) { @@ -200,13 +193,6 @@ eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); edev = dev_get_drvdata(dev); - if (unlikely(off >= edev->bin.size)) - return -EFBIG; - if ((off + count) > edev->bin.size) - count = edev->bin.size - off; - if (unlikely(!count)) - return count; - /* only write even number of bytes on 16-bit devices */ if (edev->addrlen == 6) { step = 2; -- cgit v1.1 From 79dedbddd0eea471d78ef82eb7c42b8fb1bdef65 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:49 +0300 Subject: misc: eeprom: clean up eeprom_read() The change removes redundant sysfs binary file boundary check, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Reviewed-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/eeprom.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index b432873..7342fd6 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -88,11 +88,6 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, struct eeprom_data *data = i2c_get_clientdata(client); u8 slice; - if (off > EEPROM_SIZE) - return 0; - if (off + count > EEPROM_SIZE) - count = EEPROM_SIZE - off; - /* Only refresh slices which contain requested bytes */ for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) eeprom_update_client(client, slice); -- cgit v1.1 From 2664e0386e813158b599a73164f8f7ddb2b0eb6d Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:50 +0300 Subject: misc: eeprom: max6875: clean up max6875_read() The change removes redundant sysfs binary file boundary check, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/max6875.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 580ff9d..9aa4332 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -114,12 +114,6 @@ static ssize_t max6875_read(struct file *filp, struct kobject *kobj, struct max6875_data *data = i2c_get_clientdata(client); int slice, max_slice; - if (off > USER_EEPROM_SIZE) - return 0; - - if (off + count > USER_EEPROM_SIZE) - count = USER_EEPROM_SIZE - off; - /* refresh slices which contain requested bytes */ max_slice = (off + count - 1) >> SLICE_BITS; for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++) -- cgit v1.1 From 4816693286d4ff9219b1cc72c2ab9c589448ebcb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 Jul 2015 12:54:40 -0400 Subject: toshiba laptop: replace ioremap_cache with ioremap With ioremap_cache being replaced with memremap there is no longer a guarantee that a mapping will silently fall back to an uncached mapping. Explicitly use a vanilla ioremap() for this short lived mapping. Cc: Arnd Bergmann Cc: Jonathan Buzzard Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/char/toshiba.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c index 014c9d9..f5a45d8 100644 --- a/drivers/char/toshiba.c +++ b/drivers/char/toshiba.c @@ -430,7 +430,7 @@ static int tosh_probe(void) int i,major,minor,day,year,month,flag; unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 }; SMMRegisters regs; - void __iomem *bios = ioremap_cache(0xf0000, 0x10000); + void __iomem *bios = ioremap(0xf0000, 0x10000); if (!bios) return -ENOMEM; -- cgit v1.1 From 135d9f7d135a11ff4a5279325b06c5e8c82952b5 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Fri, 5 Jun 2015 13:32:27 +0900 Subject: extcon: max77843: Clear IRQ bits state before request IRQ IRQ signal before driver probe is needless because driver sends current state after platform booting done. So, this patch clears MUIC IRQ bits before request IRQ. Signed-off-by: Jaewon Kim Acked-by: MyungJoo Ham Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-max77843.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index fac2f14..cc5e7bc 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -781,6 +781,15 @@ static int max77843_muic_probe(struct platform_device *pdev) /* Support virtual irq domain for max77843 MUIC device */ INIT_WORK(&info->irq_work, max77843_muic_irq_work); + /* Clear IRQ bits before request IRQs */ + ret = regmap_bulk_read(max77843->regmap_muic, + MAX77843_MUIC_REG_INT1, info->status, + MAX77843_MUIC_IRQ_NUM); + if (ret) { + dev_err(&pdev->dev, "Failed to Clear IRQ bits\n"); + goto err_muic_irq; + } + for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) { struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i]; unsigned int virq = 0; -- cgit v1.1 From 85a77ff0160ab0a70eb4e8b14200e29b4d35c355 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 11 Jun 2015 14:58:47 +0900 Subject: extcon: Remove duplicate header file in extcon.h This patch removes the duplicate header file in extcon.h. Signed-off-by: Chanwoo Choi --- include/linux/extcon.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/extcon.h b/include/linux/extcon.h index b16d929..1656c98 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -27,8 +27,6 @@ #define __LINUX_EXTCON_H__ #include -#include -#include /* * Define the unique id of supported external connectors -- cgit v1.1 From 2519b7650e99d90643a7a20d623513de9c95a817 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 11 Jun 2015 20:17:02 +0900 Subject: extcon: Remove optional print_state() function pointer of struct extcon_dev This patch removes the optional print_state() function pointer which included in 'struct extcon_dev' because the extcon must maintain the consistent name of extcon device on sysfs instead of inconsistent state of external connectors. Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-gpio.c | 18 ------------------ drivers/extcon/extcon.c | 8 -------- include/linux/extcon.h | 5 ----- 3 files changed, 31 deletions(-) diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 355459a..57c24fa 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -65,22 +65,6 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf) -{ - struct device *dev = edev->dev.parent; - struct gpio_extcon_data *extcon_data = dev_get_drvdata(dev); - const char *state; - - if (extcon_get_state(edev)) - state = extcon_data->state_on; - else - state = extcon_data->state_off; - - if (state) - return sprintf(buf, "%s\n", state); - return -EINVAL; -} - static int gpio_extcon_probe(struct platform_device *pdev) { struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -110,8 +94,6 @@ static int gpio_extcon_probe(struct platform_device *pdev) extcon_data->state_on = pdata->state_on; extcon_data->state_off = pdata->state_off; extcon_data->check_on_resume = pdata->check_on_resume; - if (pdata->state_on && pdata->state_off) - extcon_data->edev->print_state = extcon_gpio_print_state; ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, pdev->name); diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 43b57b0..d1fb5b4 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -172,14 +172,6 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, int i, count = 0; struct extcon_dev *edev = dev_get_drvdata(dev); - if (edev->print_state) { - int ret = edev->print_state(edev, buf); - - if (ret >= 0) - return ret; - /* Use default if failed */ - } - if (edev->max_supported == 0) return sprintf(buf, "%u\n", edev->state); diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 1656c98..c0f8c4f 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -75,8 +75,6 @@ struct extcon_cable; * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_state: An optional callback to override the method to print the - * status of the extcon device. * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. @@ -100,9 +98,6 @@ struct extcon_dev { const unsigned int *supported_cable; const u32 *mutually_exclusive; - /* Optional callbacks to override class functions */ - ssize_t (*print_state)(struct extcon_dev *edev, char *buf); - /* Internal data. Please do not set. */ struct device dev; struct raw_notifier_head *nh; -- cgit v1.1 From 1fe189bfb0fa2b01cea6464a0a6a98f5f118a376 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 11 Jun 2015 20:46:07 +0900 Subject: extcon: palmas: Remove the mutually_exclusive array This patch removes the mutually_exclusive array of extcon-palmas.c. After used the unique id of each external connector on 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string"), extcon driver can't directly handle the bit value indicating the external connectors. Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-palmas.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index eebdf2a..8933e7e 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -35,8 +35,6 @@ static const unsigned int palmas_extcon_cable[] = { EXTCON_NONE, }; -static const int mutually_exclusive[] = {0x3, 0x0}; - static void palmas_usb_wakeup(struct palmas *palmas, int enable) { if (enable) @@ -195,7 +193,6 @@ static int palmas_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to allocate extcon device\n"); return -ENOMEM; } - palmas_usb->edev->mutually_exclusive = mutually_exclusive; status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev); if (status) { -- cgit v1.1 From feffb0cc63015798803082a330d2fd96b00e1773 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 19 Jun 2015 17:23:29 +0100 Subject: extcon: arizona: Update to use the new device properties API The device properties API will load data from both device tree and ACPI, update the binding to use this API instead of the OF API. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index ad87f26..a366ee3 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -1110,12 +1111,12 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, regmap_update_bits(arizona->regmap, reg, mask, level); } -static int arizona_extcon_of_get_pdata(struct arizona *arizona) +static int arizona_extcon_device_get_pdata(struct arizona *arizona) { struct arizona_pdata *pdata = &arizona->pdata; unsigned int val = ARIZONA_ACCDET_MODE_HPL; - of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel", &val); + device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val); switch (val) { case ARIZONA_ACCDET_MODE_HPL: case ARIZONA_ACCDET_MODE_HPR: @@ -1147,10 +1148,8 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (!info) return -ENOMEM; - if (IS_ENABLED(CONFIG_OF)) { - if (!dev_get_platdata(arizona->dev)) - arizona_extcon_of_get_pdata(arizona); - } + if (!dev_get_platdata(arizona->dev)) + arizona_extcon_device_get_pdata(arizona); info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); if (IS_ERR(info->micvdd)) { -- cgit v1.1 From 4778d44ff3126b64f784ce9bf2b9dd3dbab1551b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 19 Jun 2015 17:23:30 +0100 Subject: extcon: arizona: Add basic microphone detection DT/ACPI bindings This patch adds bindings for the basic microphone detection platform data. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index a366ee3..7af42cb 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1128,6 +1128,24 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL; } + device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce", + &pdata->micd_detect_debounce); + + device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time", + &pdata->micd_bias_start_time); + + device_property_read_u32(arizona->dev, "wlf,micd-rate", + &pdata->micd_rate); + + device_property_read_u32(arizona->dev, "wlf,micd-dbtime", + &pdata->micd_dbtime); + + device_property_read_u32(arizona->dev, "wlf,micd-timeout", + &pdata->micd_timeout); + + pdata->micd_force_micbias = device_property_read_bool(arizona->dev, + "wlf,micd-force-micbias"); + return 0; } -- cgit v1.1 From 8e5838dd7b8c226cca235aa64c2f210517ef9b64 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 19 Jun 2015 17:23:31 +0100 Subject: extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio Convert to using the newer gpiod interface for the micd_pol_gpio. Although we still carry support for the old gpio interface from pdata. Signed-off-by: Charles Keepax [cw00.choi: Modify the patch titlei to include the detailed content] Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 41 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 5 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 7af42cb..4dd684a 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -95,6 +96,8 @@ struct arizona_extcon_info { int hpdet_ip_version; struct extcon_dev *edev; + + struct gpio_desc *micd_pol_gpio; }; static const struct arizona_micd_config micd_default_modes[] = { @@ -205,6 +208,10 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) if (arizona->pdata.micd_pol_gpio > 0) gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, info->micd_modes[mode].gpio); + else + gpiod_set_value_cansleep(info->micd_pol_gpio, + info->micd_modes[mode].gpio); + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_BIAS_SRC_MASK, info->micd_modes[mode].bias << @@ -1258,6 +1265,27 @@ static int arizona_extcon_probe(struct platform_device *pdev) arizona->pdata.micd_pol_gpio, ret); goto err_register; } + } else { + if (info->micd_modes[0].gpio) + mode = GPIOD_OUT_HIGH; + else + mode = GPIOD_OUT_LOW; + + /* We can't use devm here because we need to do the get + * against the MFD device, as that is where the of_node + * will reside, but if we devm against that the GPIO + * will not be freed if the extcon driver is unloaded. + */ + info->micd_pol_gpio = gpiod_get_optional(arizona->dev, + "wlf,micd-pol", + GPIOD_OUT_LOW); + if (IS_ERR(info->micd_pol_gpio)) { + ret = PTR_ERR(info->micd_pol_gpio); + dev_err(arizona->dev, + "Failed to get microphone polarity GPIO: %d\n", + ret); + goto err_register; + } } if (arizona->pdata.hpdet_id_gpio > 0) { @@ -1268,7 +1296,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (ret != 0) { dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", arizona->pdata.hpdet_id_gpio, ret); - goto err_register; + goto err_gpio; } } @@ -1312,7 +1340,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) dev_err(arizona->dev, "MICD ranges must be sorted\n"); ret = -EINVAL; - goto err_input; + goto err_gpio; } } } @@ -1331,7 +1359,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) dev_err(arizona->dev, "Unsupported MICD level %d\n", info->micd_ranges[i].max); ret = -EINVAL; - goto err_input; + goto err_gpio; } dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", @@ -1404,7 +1432,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", ret); - goto err_input; + goto err_gpio; } ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); @@ -1475,7 +1503,8 @@ err_rise_wake: arizona_set_irq_wake(arizona, jack_irq_rise, 0); err_rise: arizona_free_irq(arizona, jack_irq_rise, info); -err_input: +err_gpio: + gpiod_put(info->micd_pol_gpio); err_register: pm_runtime_disable(&pdev->dev); return ret; @@ -1487,6 +1516,8 @@ static int arizona_extcon_remove(struct platform_device *pdev) struct arizona *arizona = info->arizona; int jack_irq_rise, jack_irq_fall; + gpiod_put(info->micd_pol_gpio); + pm_runtime_disable(&pdev->dev); regmap_update_bits(arizona->regmap, -- cgit v1.1 From 0ffe8cbd51dafa5ad6686435bb1bd0afdd2b006b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 19 Jun 2015 17:23:32 +0100 Subject: extcon: arizona: Ensure variables are set for headphone detection The detecting flag really refers to the microphone detection stage and as such should be cleared before arizona_identify_headphones is called. Also the mic flag should be set before identify headphones is called as well. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 4dd684a..2336de6 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -765,10 +765,11 @@ static void arizona_micd_timeout_work(struct work_struct *work) mutex_lock(&info->lock); dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n"); - arizona_identify_headphone(info); info->detecting = false; + arizona_identify_headphone(info); + arizona_stop_mic(info); mutex_unlock(&info->lock); @@ -834,6 +835,9 @@ static void arizona_micd_detect(struct work_struct *work) /* If we got a high impedence we should have a headset, report it. */ if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { + info->mic = true; + info->detecting = false; + arizona_identify_headphone(info); ret = extcon_set_cable_state_(info->edev, @@ -849,8 +853,6 @@ static void arizona_micd_detect(struct work_struct *work) ret); } - info->mic = true; - info->detecting = false; goto handled; } @@ -863,10 +865,11 @@ static void arizona_micd_detect(struct work_struct *work) if (info->detecting && (val & MICD_LVL_1_TO_7)) { if (info->jack_flips >= info->micd_num_modes * 10) { dev_dbg(arizona->dev, "Detected HP/line\n"); - arizona_identify_headphone(info); info->detecting = false; + arizona_identify_headphone(info); + arizona_stop_mic(info); } else { info->micd_mode++; -- cgit v1.1 From 7eae43aeab27e8f65c0a2e31567fafcfc7aa4649 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Sun, 21 Jun 2015 23:48:36 +0900 Subject: extcon: Add exception handling to prevent the NULL pointer access This patch check whether argument is NULL to prevent NULL pointer access. Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index d1fb5b4..8301a72 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -264,6 +264,9 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) unsigned long flags; bool attached; + if (!edev) + return -EINVAL; + spin_lock_irqsave(&edev->lock, flags); if (edev->state != ((edev->state & ~mask) | (state & mask))) { @@ -337,6 +340,9 @@ EXPORT_SYMBOL_GPL(extcon_update_state); */ int extcon_set_state(struct extcon_dev *edev, u32 state) { + if (!edev) + return -EINVAL; + return extcon_update_state(edev, 0xffffffff, state); } EXPORT_SYMBOL_GPL(extcon_set_state); @@ -350,6 +356,9 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id) { int index; + if (!edev) + return -EINVAL; + index = find_cable_index_by_id(edev, id); if (index < 0) return index; @@ -394,6 +403,9 @@ int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, u32 state; int index; + if (!edev) + return -EINVAL; + index = find_cable_index_by_id(edev, id); if (index < 0) return index; @@ -436,6 +448,9 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) { struct extcon_dev *sd; + if (!extcon_name) + return ERR_PTR(-EINVAL); + mutex_lock(&extcon_dev_list_lock); list_for_each_entry(sd, &extcon_dev_list, entry) { if (!strcmp(sd->name, extcon_name)) @@ -564,6 +579,9 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, unsigned long flags; int ret, idx; + if (!edev || !nb) + return -EINVAL; + idx = find_cable_index_by_id(edev, id); spin_lock_irqsave(&edev->lock, flags); @@ -586,6 +604,9 @@ int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id, unsigned long flags; int ret, idx; + if (!edev || !nb) + return -EINVAL; + idx = find_cable_index_by_id(edev, id); spin_lock_irqsave(&edev->lock, flags); @@ -646,6 +667,9 @@ struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable) { struct extcon_dev *edev; + if (!supported_cable) + return ERR_PTR(-EINVAL); + edev = kzalloc(sizeof(*edev), GFP_KERNEL); if (!edev) return ERR_PTR(-ENOMEM); @@ -746,7 +770,7 @@ int extcon_dev_register(struct extcon_dev *edev) return ret; } - if (!edev->supported_cable) + if (!edev || !edev->supported_cable) return -EINVAL; for (; edev->supported_cable[index] != EXTCON_NONE; index++); @@ -952,6 +976,9 @@ void extcon_dev_unregister(struct extcon_dev *edev) { int index; + if (!edev) + return; + mutex_lock(&extcon_dev_list_lock); list_del(&edev->entry); mutex_unlock(&extcon_dev_list_lock); @@ -1058,6 +1085,9 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index) struct device_node *node; struct extcon_dev *edev; + if (!dev) + return ERR_PTR(-EINVAL); + if (!dev->of_node) { dev_err(dev, "device does not have a device node entry\n"); return ERR_PTR(-EINVAL); -- cgit v1.1 From 57f70ef9bd19378b51a282be6b46b45b70d4980d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 25 Jun 2015 16:47:02 +0100 Subject: extcon: arizona: Declare 3-pole jack if we detect open circuit on mic Detecting an open-circuit on the microphone pin, usually means the headset has a microphone but the cable is faulty. Currently the code will simply stop detecting and declare nothing in this situation. It is better to declare this as headphones such that the user can still use their headset as plain headphones even if the microphone is faulty. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 2336de6..eaf0644 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -829,7 +829,10 @@ static void arizona_micd_detect(struct work_struct *work) /* Due to jack detect this should never happen */ if (!(val & ARIZONA_MICD_STS)) { dev_warn(arizona->dev, "Detected open circuit\n"); + info->mic = false; + arizona_stop_mic(info); info->detecting = false; + arizona_identify_headphone(info); goto handled; } -- cgit v1.1 From bb327e92a9651c4d9bbf8ee9a367d575d7e6a102 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 30 Jun 2015 13:32:39 +0100 Subject: extcon: arizona: Simplify pdata symantics for micd_dbtime Currently micd_dbtime can be set to 0 for default, 1 for 4 measurements, or a greater than 16-bit value for 2 measurements. This patch simplifies the symantics to 2 for 2 measurements, 4 for 4 measurements and any other value for the default. I am not super keen on changing the symantics of the pdata at this stage in the drivers life, but acceptance of the DT binding for this field has been made conditional on this happening. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index eaf0644..4b9f09c 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -48,6 +48,9 @@ #define HPDET_DEBOUNCE 500 #define DEFAULT_MICD_TIMEOUT 2000 +#define MICD_DBTIME_TWO_READINGS 2 +#define MICD_DBTIME_FOUR_READINGS 4 + #define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ @@ -1318,11 +1321,19 @@ static int arizona_extcon_probe(struct platform_device *pdev) arizona->pdata.micd_rate << ARIZONA_MICD_RATE_SHIFT); - if (arizona->pdata.micd_dbtime) + switch (arizona->pdata.micd_dbtime) { + case MICD_DBTIME_FOUR_READINGS: regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_DBTIME_MASK, - arizona->pdata.micd_dbtime - << ARIZONA_MICD_DBTIME_SHIFT); + ARIZONA_MICD_DBTIME); + break; + case MICD_DBTIME_TWO_READINGS: + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_DBTIME_MASK, 0); + break; + default: + break; + } BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) != 0x40); -- cgit v1.1 From bef025a1f8e0e566f954613f4e5087f6b156e2a5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 14:50:20 +0900 Subject: extcon: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-rt8973a.c | 1 - drivers/extcon/extcon-sm5502.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c index 92c9392..11592e9 100644 --- a/drivers/extcon/extcon-rt8973a.c +++ b/drivers/extcon/extcon-rt8973a.c @@ -693,7 +693,6 @@ MODULE_DEVICE_TABLE(i2c, rt8973a_i2c_id); static struct i2c_driver rt8973a_muic_i2c_driver = { .driver = { .name = "rt8973a", - .owner = THIS_MODULE, .pm = &rt8973a_muic_pm_ops, .of_match_table = rt8973a_dt_match, }, diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index 817dece..0ffefef 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -685,7 +685,6 @@ MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id); static struct i2c_driver sm5502_muic_i2c_driver = { .driver = { .name = "sm5502", - .owner = THIS_MODULE, .pm = &sm5502_muic_pm_ops, .of_match_table = sm5502_dt_match, }, -- cgit v1.1 From a598af7f0279195abffbfb9bf2070457e9c89ff3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Aug 2015 10:47:23 +0300 Subject: extcon: Fix signedness bugs about break error handling Unsigned is never less than zero so this error handling won't work. Fixes: be052cc87745 ('extcon: Fix hang and extcon_get/set_cable_state().') Signed-off-by: Dan Carpenter Reviewed-by: Roger Quadros [cw00.choi: Change the patch title and fix signedness bug of find_cable_index_by_id() ] Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 8301a72..a07addd 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -126,7 +126,7 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id static int find_cable_id_by_name(struct extcon_dev *edev, const char *name) { - unsigned int id = -EINVAL; + int id = -EINVAL; int i = 0; /* Find the id of extcon cable */ @@ -143,7 +143,7 @@ static int find_cable_id_by_name(struct extcon_dev *edev, const char *name) static int find_cable_index_by_name(struct extcon_dev *edev, const char *name) { - unsigned int id; + int id; if (edev->max_supported == 0) return -EINVAL; @@ -379,7 +379,7 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state_); */ int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name) { - unsigned int id; + int id; id = find_cable_id_by_name(edev, cable_name); if (id < 0) @@ -430,7 +430,7 @@ EXPORT_SYMBOL_GPL(extcon_set_cable_state_); int extcon_set_cable_state(struct extcon_dev *edev, const char *cable_name, bool cable_state) { - unsigned int id; + int id; id = find_cable_id_by_name(edev, cable_name); if (id < 0) -- cgit v1.1 From 92b7cb5dc885b38b21093eefed8028b615952965 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 3 Aug 2015 17:40:51 +0300 Subject: extcon: palmas: Support GPIO based USB ID detection Some palmas based chip variants do not have OTG based ID logic. For these variants we rely on GPIO based USB ID detection. These chips do have VBUS comparator for VBUS detection so we continue to use the old way of detecting VBUS. Signed-off-by: Roger Quadros Acked-by: Chanwoo Choi Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- .../devicetree/bindings/extcon/extcon-palmas.txt | 5 +- drivers/extcon/extcon-palmas.c | 129 ++++++++++++++++++--- drivers/extcon/extcon-usb-gpio.c | 1 + include/linux/mfd/palmas.h | 7 ++ 4 files changed, 126 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 45414bb..f61d5af 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -10,8 +10,11 @@ Required Properties: Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe - - ti,enable-id-detection: Perform ID detection. + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. palmas-usb { compatible = "ti,twl6035-usb", "ti,palmas-usb"; diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 8933e7e..662e917 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -28,6 +28,10 @@ #include #include #include +#include +#include + +#define USB_GPIO_DEBOUNCE_MS 20 /* ms */ static const unsigned int palmas_extcon_cable[] = { EXTCON_USB, @@ -118,19 +122,54 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) return IRQ_HANDLED; } +static void palmas_gpio_id_detect(struct work_struct *work) +{ + int id; + struct palmas_usb *palmas_usb = container_of(to_delayed_work(work), + struct palmas_usb, + wq_detectid); + struct extcon_dev *edev = palmas_usb->edev; + + if (!palmas_usb->id_gpiod) + return; + + id = gpiod_get_value_cansleep(palmas_usb->id_gpiod); + + if (id) { + extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); + dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); + } else { + extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); + dev_info(palmas_usb->dev, "USB-HOST cable is attached\n"); + } +} + +static irqreturn_t palmas_gpio_id_irq_handler(int irq, void *_palmas_usb) +{ + struct palmas_usb *palmas_usb = _palmas_usb; + + queue_delayed_work(system_power_efficient_wq, &palmas_usb->wq_detectid, + palmas_usb->sw_debounce_jiffies); + + return IRQ_HANDLED; +} + static void palmas_enable_irq(struct palmas_usb *palmas_usb) { palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_VBUS_CTRL_SET, PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP); - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_CTRL_SET, PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP); + if (palmas_usb->enable_id_detection) { + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, + PALMAS_USB_ID_CTRL_SET, + PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP); - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_INT_EN_HI_SET, - PALMAS_USB_ID_INT_EN_HI_SET_ID_GND | - PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT); + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, + PALMAS_USB_ID_INT_EN_HI_SET, + PALMAS_USB_ID_INT_EN_HI_SET_ID_GND | + PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT); + } if (palmas_usb->enable_vbus_detection) palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb); @@ -169,20 +208,36 @@ static int palmas_usb_probe(struct platform_device *pdev) palmas_usb->wakeup = pdata->wakeup; } + palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id"); + if (IS_ERR(palmas_usb->id_gpiod)) { + dev_err(&pdev->dev, "failed to get id gpio\n"); + return PTR_ERR(palmas_usb->id_gpiod); + } + + if (palmas_usb->enable_id_detection && palmas_usb->id_gpiod) { + palmas_usb->enable_id_detection = false; + palmas_usb->enable_gpio_id_detection = true; + } + + if (palmas_usb->enable_gpio_id_detection) { + u32 debounce; + + if (of_property_read_u32(node, "debounce-delay-ms", &debounce)) + debounce = USB_GPIO_DEBOUNCE_MS; + + status = gpiod_set_debounce(palmas_usb->id_gpiod, + debounce * 1000); + if (status < 0) + palmas_usb->sw_debounce_jiffies = msecs_to_jiffies(debounce); + } + + INIT_DELAYED_WORK(&palmas_usb->wq_detectid, palmas_gpio_id_detect); + palmas->usb = palmas_usb; palmas_usb->palmas = palmas; palmas_usb->dev = &pdev->dev; - palmas_usb->id_otg_irq = regmap_irq_get_virq(palmas->irq_data, - PALMAS_ID_OTG_IRQ); - palmas_usb->id_irq = regmap_irq_get_virq(palmas->irq_data, - PALMAS_ID_IRQ); - palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data, - PALMAS_VBUS_OTG_IRQ); - palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data, - PALMAS_VBUS_IRQ); - palmas_usb_wakeup(palmas, palmas_usb->wakeup); platform_set_drvdata(pdev, palmas_usb); @@ -201,6 +256,10 @@ static int palmas_usb_probe(struct platform_device *pdev) } if (palmas_usb->enable_id_detection) { + palmas_usb->id_otg_irq = regmap_irq_get_virq(palmas->irq_data, + PALMAS_ID_OTG_IRQ); + palmas_usb->id_irq = regmap_irq_get_virq(palmas->irq_data, + PALMAS_ID_IRQ); status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->id_irq, NULL, palmas_id_irq_handler, @@ -212,9 +271,33 @@ static int palmas_usb_probe(struct platform_device *pdev) palmas_usb->id_irq, status); return status; } + } else if (palmas_usb->enable_gpio_id_detection) { + palmas_usb->gpio_id_irq = gpiod_to_irq(palmas_usb->id_gpiod); + if (palmas_usb->gpio_id_irq < 0) { + dev_err(&pdev->dev, "failed to get id irq\n"); + return palmas_usb->gpio_id_irq; + } + status = devm_request_threaded_irq(&pdev->dev, + palmas_usb->gpio_id_irq, + NULL, + palmas_gpio_id_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "palmas_usb_id", + palmas_usb); + if (status < 0) { + dev_err(&pdev->dev, + "failed to request handler for id irq\n"); + return status; + } } if (palmas_usb->enable_vbus_detection) { + palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data, + PALMAS_VBUS_OTG_IRQ); + palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data, + PALMAS_VBUS_IRQ); status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->vbus_irq, NULL, palmas_vbus_irq_handler, @@ -229,10 +312,21 @@ static int palmas_usb_probe(struct platform_device *pdev) } palmas_enable_irq(palmas_usb); + /* perform initial detection */ + palmas_gpio_id_detect(&palmas_usb->wq_detectid.work); device_set_wakeup_capable(&pdev->dev, true); return 0; } +static int palmas_usb_remove(struct platform_device *pdev) +{ + struct palmas_usb *palmas_usb = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&palmas_usb->wq_detectid); + + return 0; +} + #ifdef CONFIG_PM_SLEEP static int palmas_usb_suspend(struct device *dev) { @@ -243,6 +337,8 @@ static int palmas_usb_suspend(struct device *dev) enable_irq_wake(palmas_usb->vbus_irq); if (palmas_usb->enable_id_detection) enable_irq_wake(palmas_usb->id_irq); + if (palmas_usb->enable_gpio_id_detection) + enable_irq_wake(palmas_usb->gpio_id_irq); } return 0; } @@ -256,6 +352,8 @@ static int palmas_usb_resume(struct device *dev) disable_irq_wake(palmas_usb->vbus_irq); if (palmas_usb->enable_id_detection) disable_irq_wake(palmas_usb->id_irq); + if (palmas_usb->enable_gpio_id_detection) + disable_irq_wake(palmas_usb->gpio_id_irq); } return 0; }; @@ -273,6 +371,7 @@ static const struct of_device_id of_palmas_match_tbl[] = { static struct platform_driver palmas_usb_driver = { .probe = palmas_usb_probe, + .remove = palmas_usb_remove, .driver = { .name = "palmas-usb", .of_match_table = of_palmas_match_tbl, diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index a2a4453..2b2fecf 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -15,6 +15,7 @@ */ #include +#include #include #include #include diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index bb270bd..13e1d96 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -21,6 +21,7 @@ #include #include #include +#include #include #define PALMAS_NUM_CLIENTS 3 @@ -551,10 +552,16 @@ struct palmas_usb { int vbus_otg_irq; int vbus_irq; + int gpio_id_irq; + struct gpio_desc *id_gpiod; + unsigned long sw_debounce_jiffies; + struct delayed_work wq_detectid; + enum palmas_usb_state linkstat; int wakeup; bool enable_vbus_detection; bool enable_id_detection; + bool enable_gpio_id_detection; }; #define comparator_to_palmas(x) container_of((x), struct palmas_usb, comparator) -- cgit v1.1 From ac22a1d3386e195c57e299da3bfad97a061b9616 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 13 Aug 2015 09:19:43 +0900 Subject: extcon: palmas: Fix build break due to devm_gpiod_get_optional API change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With commit b17d1bf16cc7 ("gpio: make flags mandatory for gpiod_get functions") it becomes necessary to pass the flags argument. And this patch adds the gpio header file to fix the build breakage when build testing with random configuration files. Reported-by: Stephen Rothwell Signed-off-by: Chanwoo Choi Acked-by: Uwe Kleine-König --- drivers/extcon/extcon-palmas.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 662e917..93c30a8 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #define USB_GPIO_DEBOUNCE_MS 20 /* ms */ @@ -208,7 +209,8 @@ static int palmas_usb_probe(struct platform_device *pdev) palmas_usb->wakeup = pdata->wakeup; } - palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id"); + palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id", + GPIOD_IN); if (IS_ERR(palmas_usb->id_gpiod)) { dev_err(&pdev->dev, "failed to get id gpio\n"); return PTR_ERR(palmas_usb->id_gpiod); -- cgit v1.1 From 92f26189b181a65fcb1ff6220a4bf45d44502e4a Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 13 Aug 2015 19:06:05 +0530 Subject: auxdisplay: ks0108: initialize local parport variable The local variable ks0108_parport is used by other functions to write to the parallel port. We missed initializing it when we converted the driver to use new Parallel Port codes. Fixes: 4edd70c133f3 ("auxdisplay: ks0108: use new parport device model") Reported-by: Fengguang Wu Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/ks0108.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index 4c471bd..816de9e 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -146,6 +146,7 @@ static void ks0108_parport_attach(struct parport *port) goto err_unreg_device; } + ks0108_parport = port; ks0108_inited = 1; return; @@ -167,6 +168,7 @@ static void ks0108_parport_detach(struct parport *port) parport_release(ks0108_pardevice); parport_unregister_device(ks0108_pardevice); ks0108_pardevice = NULL; + ks0108_parport = NULL; } /* -- cgit v1.1