From b358c6cf029cb67b3ed9cc367fb46f1fa3228c5b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 30 Apr 2013 10:44:51 +0300 Subject: fbdev/ps3fb: fix compile warning Commit 11bd5933abe0 ("fbdev/ps3fb: use vm_iomap_memory()") introduced the following warning: drivers/video/ps3fb.c: In function 'ps3fb_mmap': drivers/video/ps3fb.c:712:2: warning: suggest parentheses around '+' inside '<<' [-Wparentheses] Fix this by adding the parentheses. Signed-off-by: Tomi Valkeinen --- drivers/video/ps3fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index d9f08c6..dbfe2c1 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -710,7 +710,7 @@ static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma) r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len); dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n", - info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT, + info->fix.smem_start + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); return r; -- cgit v1.1 From 625cdd78d119d5848ac3c47d129bdf5f23f64120 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 11 May 2013 19:13:49 +0300 Subject: svcauth_gss: fix error code in use_gss_proxy() This should return zero on success and -EBUSY on error so the type needs to be int instead of bool. Signed-off-by: Dan Carpenter Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 871c73c..2c6a1ec 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1287,7 +1287,7 @@ static bool use_gss_proxy(struct net *net) #ifdef CONFIG_PROC_FS -static bool set_gss_proxy(struct net *net, int type) +static int set_gss_proxy(struct net *net, int type) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; -- cgit v1.1 From 3fab70c165795431f00ddf9be8b84ddd07bd1f8f Mon Sep 17 00:00:00 2001 From: Lingzhu Xiang Date: Fri, 10 May 2013 18:29:21 +0800 Subject: efivarfs: Never return ENOENT from firmware again Previously in 1fa7e69 efi_status_to_err() translated firmware status EFI_NOT_FOUND to -EIO instead of -ENOENT for efivarfs operations to avoid confusion. After refactoring in e14ab23, it is also used in other places where the translation may be unnecessary. So move the translation to efivarfs specific code. Also return EOF for reading zero-length files, which is what users would expect. Cc: Josh Boyer Cc: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Signed-off-by: Lingzhu Xiang Signed-off-by: Matt Fleming --- fs/efivarfs/file.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index bfb5315..8dd524f 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -44,8 +44,11 @@ static ssize_t efivarfs_file_write(struct file *file, bytes = efivar_entry_set_get_size(var, attributes, &datasize, data, &set); - if (!set && bytes) + if (!set && bytes) { + if (bytes == -ENOENT) + bytes = -EIO; goto out; + } if (bytes == -ENOENT) { drop_nlink(inode); @@ -76,7 +79,14 @@ static ssize_t efivarfs_file_read(struct file *file, char __user *userbuf, int err; err = efivar_entry_size(var, &datasize); - if (err) + + /* + * efivarfs represents uncommitted variables with + * zero-length files. Reading them should return EOF. + */ + if (err == -ENOENT) + return 0; + else if (err) return err; data = kmalloc(datasize + sizeof(attributes), GFP_KERNEL); -- cgit v1.1 From d51df2c5d3c1f2c639708fc644ed67296bb51dc5 Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Fri, 10 May 2013 20:45:36 +0000 Subject: efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse The loop in efivar_update_sysfs_entries() reuses the same allocation for entries each time it calls efivar_create_sysfs_entry(entry). This is wrong because efivar_create_sysfs_entry() expects to keep the memory it was passed, so the caller may not free it (and may not pass the same memory in multiple times). This leads to the oops below. Fix by getting a new allocation each time we go around the loop. ---[ end trace ba4907d5c519d111 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] efivar_entry_find+0x14f/0x2d0 PGD 0 Oops: 0000 [#2] SMP Modules linked in: oops(OF+) ebtable_nat ebtables xt_CHECKSUM [...] CPU: 0 PID: 301 Comm: kworker/0:2 Tainted: GF D O 3.9.0+ #1 Hardware name: LENOVO 4291EV7/4291EV7, BIOS 8DET52WW (1.22 ) 09/15/2011 Workqueue: events efivar_update_sysfs_entries task: ffff8801955920c0 ti: ffff88019413e000 task.ti: ffff88019413e000 RIP: 0010:[] [] efivar_entry_find+0x14f/0x2d0 RSP: 0018:ffff88019413fa48 EFLAGS: 00010006 RAX: 0000000000000000 RBX: ffff880195d87c00 RCX: ffffffff81ab6f60 RDX: ffff88019413fb88 RSI: 0000000000000400 RDI: ffff880196254000 RBP: ffff88019413fbd8 R08: 0000000000000000 R09: ffff8800dad99037 R10: ffff880195d87c00 R11: 0000000000000430 R12: ffffffff81ab6f60 R13: fffffffffffff7d8 R14: ffff880196254000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88019e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88019413fb78 ffff88019413fb88 ffffffff81e85d60 03000000972b5c00 ffff88019413fa29 ffffffff81e85d60 ffff88019413fbfb 0000000197087280 00000000000000fe 0000000000000001 ffffffff81e85dd9 ffff880197087280 Call Trace: [] ? idr_get_empty_slot+0x131/0x240 [] ? put_dec+0x72/0x90 [] ? cache_alloc_refill+0x170/0x2f0 [] efivar_update_sysfs_entry+0x150/0x220 [] ? efi_call2+0x9/0x70 [] ? virt_efi_get_next_variable+0x47/0x1b0 [] ? kmem_cache_alloc_trace+0x1af/0x1c0 [] efivar_init+0x2c3/0x380 [] ? efivar_delete+0xd0/0xd0 [] efivar_update_sysfs_entries+0x6f/0x90 [] process_one_work+0x183/0x490 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x160/0x160 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Code: 8d 55 b0 48 8d 45 a0 49 81 ed 28 08 00 00 48 89 95 78 fe [...] RIP [] efivar_entry_find+0x14f/0x2d0 RSP CR2: 0000000000000000 ---[ end trace ba4907d5c519d112 ]--- Cc: James Bottomley Cc: Tomoki Sekiyama Signed-off-by: Seiji Aguchi Signed-off-by: Matt Fleming --- drivers/firmware/efi/efivars.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index b623c59..8bd1bb6 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -523,13 +523,11 @@ static void efivar_update_sysfs_entries(struct work_struct *work) struct efivar_entry *entry; int err; - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) - return; - /* Add new sysfs entries */ while (1) { - memset(entry, 0, sizeof(*entry)); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return; err = efivar_init(efivar_update_sysfs_entry, entry, true, false, &efivar_sysfs_list); -- cgit v1.1 From 286233e604d79f0c7fa04abec2180d5d89a74749 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 10 May 2013 15:08:39 +0300 Subject: crypto: caam - fix inconsistent assoc dma mapping direction req->assoc is dma mapped BIDIRECTIONAL and unmapped TO_DEVICE. Since it is read-only for the device, use TO_DEVICE both for mapping and unmapping. Cc: # 3.9, 3.8 Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 765fdf5..bf416a8 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -1154,7 +1154,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); @@ -1336,7 +1336,7 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); -- cgit v1.1 From 972be324fe0adaa67717407510aa067a4ae53d2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 May 2013 09:06:17 +0200 Subject: microblaze: Initialize temp variable to remove compilation warning Compilation warning: arch/microblaze/kernel/cpu/cache.c:148:2: warning: 'temp' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4254514b..a6e44410 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -140,7 +140,7 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ -- cgit v1.1 From eccaf52fee8305d5207ff110950a82c100e459bc Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Thu, 2 May 2013 22:07:01 +0800 Subject: x86, efi: initial the local variable of DataSize to zero That will be better initial the value of DataSize to zero for the input of GetVariable(), otherwise we will feed a random value. The debug log of input DataSize like this: ... [ 195.915612] EFI Variables Facility v0.08 2004-May-17 [ 195.915819] efi: size: 18446744071581821342 [ 195.915969] efi: size': 18446744071581821342 [ 195.916324] efi: size: 18446612150714306560 [ 195.916632] efi: size': 18446612150714306560 [ 195.917159] efi: size: 18446612150714306560 [ 195.917453] efi: size': 18446612150714306560 ... The size' is value that was returned by BIOS. After applied this patch: [ 82.442042] EFI Variables Facility v0.08 2004-May-17 [ 82.442202] efi: size: 0 [ 82.442360] efi: size': 1039 [ 82.443828] efi: size: 0 [ 82.444127] efi: size': 2616 [ 82.447057] efi: size: 0 [ 82.447356] efi: size': 5832 ... Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a non-zero DataSize. Cc: Matthew Garrett Cc: H. Peter Anvin Signed-off-by: Lee, Chun-Yi Signed-off-by: Matt Fleming --- arch/x86/platform/efi/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 55856b2..82089d8 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -206,7 +206,7 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, } if (boot_used_size && !finished) { - unsigned long size; + unsigned long size = 0; u32 attr; efi_status_t s; void *tmp; -- cgit v1.1 From fbe06b7bae7c9cf6ab05168fce5ee93b2f4bae7c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 May 2013 11:49:10 -0700 Subject: x86, range: fix missing merge during add range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Christian found v3.9 does not work with E350 with EFI is enabled. [ 1.658832] Trying to unpack rootfs image as initramfs... [ 1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000 [ 1.686940] IP: [] memset+0x1f/0xb0 [ 1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0 but early memtest report all memory could be accessed without problem. early page table is set in following sequence: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff] [ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff] [ 0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff] but later efi_enter_virtual_mode try set mapping again wrongly. [ 0.010644] pid_max: default: 32768 minimum: 301 [ 0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff] that means it fails with pfn_range_is_mapped. It turns out that we have a bug in add_range_with_merge and it does not merge range properly when new add one fill the hole between two exsiting ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between [mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff]. Fix the add_range_with_merge by calling itself recursively. Reported-by: "Christian König" Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com Cc: v3.9 Signed-off-by: H. Peter Anvin --- kernel/range.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/range.c b/kernel/range.c index 071b0ab..eb911db 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -48,9 +48,11 @@ int add_range_with_merge(struct range *range, int az, int nr_range, final_start = min(range[i].start, start); final_end = max(range[i].end, end); - range[i].start = final_start; - range[i].end = final_end; - return nr_range; + /* clear it and add it back for further merge */ + range[i].start = 0; + range[i].end = 0; + return add_range_with_merge(range, az, nr_range, + final_start, final_end); } /* Need to add it: */ -- cgit v1.1 From 3d15aacbb802af72b4ff0c3ba576536cdb3bace0 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Sun, 19 May 2013 22:58:07 -0700 Subject: ASoC: max98090: request IRQF_ONESHOT interrupt request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- sound/soc/codecs/max98090.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index ce0d364..8d14a76 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2233,7 +2233,7 @@ static int max98090_probe(struct snd_soc_codec *codec) dev_dbg(codec->dev, "irq = %d\n", max98090->irq); ret = request_threaded_irq(max98090->irq, NULL, - max98090_interrupt, IRQF_TRIGGER_FALLING, + max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max98090_interrupt", codec); if (ret < 0) { dev_err(codec->dev, "request_irq failed: %d\n", -- cgit v1.1 From 2c071ed7c3660992951abe4b560359058ce41f68 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 20 May 2013 08:33:54 +0100 Subject: ASoC: soc-compress: Send correct stream event for capture start Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 3853f7e..06a8000a 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -220,8 +220,12 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream, goto err; } - snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, - SND_SOC_DAPM_STREAM_START); + if (cstream->direction == SND_COMPRESS_PLAYBACK) + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, + SND_SOC_DAPM_STREAM_START); + else + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_CAPTURE, + SND_SOC_DAPM_STREAM_START); /* cancel any delayed stream shutdown that is pending */ rtd->pop_wait = 0; -- cgit v1.1 From 7ec892ef5f1bd707e2d5ab128069cb6af75c7f07 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Wed, 10 Apr 2013 19:30:38 +0900 Subject: ARM: dts: Enabling samsung-usb2phy driver for exynos5250 Adding usbphy node for Exynos5250 along with the necessary device data to be parsed. Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3e..0673524 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -497,6 +497,21 @@ clock-names = "usbhost"; }; + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; -- cgit v1.1 From 62cc4d595fe96106ff793cbebbff051179d7619e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 May 2013 11:28:35 -0500 Subject: ASoC: wm5110: Add missing speaker initialisation Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 731884e..c00480b 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -976,6 +976,8 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret; + arizona_init_spk(codec); + snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS"); priv->core.arizona->dapm = &codec->dapm; -- cgit v1.1 From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +- drivers/target/target_core_transport.c | 28 +++++----------------------- include/target/target_core_fabric.h | 2 +- 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index b08ca7a..564024e 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2328,7 +2328,7 @@ static void srpt_release_channel_work(struct work_struct *w) se_sess = ch->sess; BUG_ON(!se_sess); - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(se_sess); transport_deregister_session(se_sess); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d182c96..7a3870f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1370,7 +1370,7 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) dump_stack(); return; } - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4a79336..311c113 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2263,14 +2263,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); /* target_wait_for_sess_cmds - Wait for outstanding descriptors * @se_sess: session to wait for active I/O - * @wait_for_tasks: Make extra transport_wait_for_tasks call */ -void target_wait_for_sess_cmds( - struct se_session *se_sess, - int wait_for_tasks) +void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; - bool rc = false; list_for_each_entry_safe(se_cmd, tmp_cmd, &se_sess->sess_cmd_list, se_cmd_list) { @@ -2280,24 +2276,10 @@ void target_wait_for_sess_cmds( " %d\n", se_cmd, se_cmd->t_state, se_cmd->se_tfo->get_cmd_state(se_cmd)); - if (wait_for_tasks) { - pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - - rc = transport_wait_for_tasks(se_cmd); - - pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } - - if (!rc) { - wait_for_completion(&se_cmd->cmd_wait_comp); - pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } + wait_for_completion(&se_cmd->cmd_wait_comp); + pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" + " fabric state: %d\n", se_cmd, se_cmd->t_state, + se_cmd->se_tfo->get_cmd_state(se_cmd)); se_cmd->se_tfo->release_cmd(se_cmd); } diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b..8a26f0d 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v1.1 From 1c98b4871cca4b7ce07e19f92f934d47cf7210b0 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 13 May 2013 18:12:25 -0300 Subject: drm/i915: Adding more reserved PCI IDs for Haswell. At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson Cc: Paulo Zanoni Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 46 +++++++++++++++++++++++++++++++---------- 1 file changed, 35 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 9ebe895..a2e4953 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -364,40 +364,64 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ - INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT3 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ - INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT3 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x040B, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041B, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042B, &intel_haswell_d_info), /* GT3 reserved */ + INTEL_VGA_DEVICE(0x040E, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041E, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042E, &intel_haswell_d_info), /* GT3 reserved */ INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ - INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT3 desktop */ INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ - INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT3 server */ INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ - INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT3 mobile */ + INTEL_VGA_DEVICE(0x0C0B, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1B, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2B, &intel_haswell_d_info), /* SDV GT3 reserved */ + INTEL_VGA_DEVICE(0x0C0E, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1E, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2E, &intel_haswell_d_info), /* SDV GT3 reserved */ INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ - INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT3 desktop */ INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ - INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT3 server */ INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ - INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT3 mobile */ + INTEL_VGA_DEVICE(0x0A0B, &intel_haswell_d_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1B, &intel_haswell_d_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2B, &intel_haswell_d_info), /* ULT GT3 reserved */ + INTEL_VGA_DEVICE(0x0A0E, &intel_haswell_m_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1E, &intel_haswell_m_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2E, &intel_haswell_m_info), /* ULT GT3 reserved */ INTEL_VGA_DEVICE(0x0D02, &intel_haswell_d_info), /* CRW GT1 desktop */ INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT2 desktop */ - INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT3 desktop */ INTEL_VGA_DEVICE(0x0D0A, &intel_haswell_d_info), /* CRW GT1 server */ INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT2 server */ - INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT3 server */ INTEL_VGA_DEVICE(0x0D06, &intel_haswell_m_info), /* CRW GT1 mobile */ INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT2 mobile */ - INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT3 mobile */ + INTEL_VGA_DEVICE(0x0D0B, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1B, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2B, &intel_haswell_d_info), /* CRW GT3 reserved */ + INTEL_VGA_DEVICE(0x0D0E, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1E, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2E, &intel_haswell_d_info), /* CRW GT3 reserved */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f31, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f32, &intel_valleyview_m_info), -- cgit v1.1 From 2d05eae1c92f93ace0fc6f282c55527d293297dd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 3 May 2013 17:36:25 +0100 Subject: drm/i915: Propagate errors back from fb set-base Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9a5328bb1a44288e6c2c1276695f8a356 Author: Daniel Vetter Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index efe8299..300942a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8332,11 +8332,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) ret = intel_set_mode(set->crtc, set->mode, set->x, set->y, set->fb); - if (ret) { - DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); - goto fail; - } } else if (config->fb_changed) { intel_crtc_wait_for_pending_flips(set->crtc); @@ -8344,18 +8339,18 @@ static int intel_crtc_set_config(struct drm_mode_set *set) set->x, set->y, set->fb); } - intel_set_config_free(config); - - return 0; - + if (ret) { + DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", + set->crtc->base.id, ret); fail: - intel_set_config_restore_state(dev, config); + intel_set_config_restore_state(dev, config); - /* Try to restore the config */ - if (config->mode_changed && - intel_set_mode(save_set.crtc, save_set.mode, - save_set.x, save_set.y, save_set.fb)) - DRM_ERROR("failed to restore config after modeset failure\n"); + /* Try to restore the config */ + if (config->mode_changed && + intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + } out_config: intel_set_config_free(config); -- cgit v1.1 From 796718925159523919a589ecbd6d1811c22ef55f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 16 May 2013 15:25:01 +0200 Subject: ASoC: davinci: fix sample rotation McASP serial audio engine needs different rotation values on TX and RX channels. Commit dde109fb462 ("ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playback") changed the calculation to fix the playback format, but broke the capture stream by doing it for both TXFMT and RXFMT. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown Cc: stable@vger.kernel.org [3.9 only] --- sound/soc/davinci/davinci-mcasp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 56ecfc7..81490fe 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -631,7 +631,8 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, int word_length) { u32 fmt; - u32 rotate = (word_length / 4) & 0x7; + u32 tx_rotate = (word_length / 4) & 0x7; + u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; /* @@ -655,9 +656,9 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXSSZ(fmt), TXSSZ(0x0F)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, - TXROT(rotate), TXROT(7)); + TXROT(tx_rotate), TXROT(7)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, - RXROT(rotate), RXROT(7)); + RXROT(rx_rotate), RXROT(7)); mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, mask); } -- cgit v1.1 From e4f2dfbb5e92be4e46c0625f4f8eb101110f756f Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 8 Mar 2013 15:03:53 +0100 Subject: m68k: implement futex.h to support userspace robust futexes and PI mutexes Linux/M68K currently doesn't support robust futexes or PI mutexes. The problem is that the futex code needs to perform certain ops (cmpxchg, set, add, or, andn, xor) atomically on user-space addresses, and M68K's lack of a futex.h causes those operations to be unsupported and disabled. This patch adds that support, but only for uniprocessor machines, which is adequate for M68K. For UP it's enough to disable preemption to ensure mutual exclusion (futexes don't need to care about other hardware agents), and the mandatory pagefault_disable() does just that. This patch is closely based on the one I co-wrote for UP ARM back in August 2008. The main change is that this patch uses the C get_user/put_user accessors instead of inline assembly code with exception table fixups. For non-MMU machines the new futex.h simply redirects to the generic futex.h, so there is no functional change for them. Tested on aranym with the glibc-2.17 test suite: no regressions, and a number of mutex/condvar test cases went from failing to succeeding (tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]). Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI mutexes: no regressions. Signed-off-by: Mikael Pettersson Acked-by: Andreas Schwab [geert: Added removal of ""generic-y += futex.h"] Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 1 - arch/m68k/include/asm/futex.h | 94 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 arch/m68k/include/asm/futex.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index c7933e4..09d77a8 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -6,7 +6,6 @@ generic-y += device.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h -generic-y += futex.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h new file mode 100644 index 0000000..bc868af --- /dev/null +++ b/arch/m68k/include/asm/futex.h @@ -0,0 +1,94 @@ +#ifndef _ASM_M68K_FUTEX_H +#define _ASM_M68K_FUTEX_H + +#ifdef __KERNEL__ +#if !defined(CONFIG_MMU) +#include +#else /* CONFIG_MMU */ + +#include +#include +#include + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + u32 val; + + if (unlikely(get_user(val, uaddr) != 0)) + return -EFAULT; + + if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) + return -EFAULT; + + *uval = val; + + return 0; +} + +static inline int +futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval, ret; + u32 tmp; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + pagefault_disable(); /* implies preempt_disable() */ + + ret = -EFAULT; + if (unlikely(get_user(oldval, uaddr) != 0)) + goto out_pagefault_enable; + + ret = 0; + tmp = oldval; + + switch (op) { + case FUTEX_OP_SET: + tmp = oparg; + break; + case FUTEX_OP_ADD: + tmp += oparg; + break; + case FUTEX_OP_OR: + tmp |= oparg; + break; + case FUTEX_OP_ANDN: + tmp &= ~oparg; + break; + case FUTEX_OP_XOR: + tmp ^= oparg; + break; + default: + ret = -ENOSYS; + } + + if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0)) + ret = -EFAULT; + +out_pagefault_enable: + pagefault_enable(); /* subsumes preempt_enable() */ + + if (ret == 0) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif /* CONFIG_MMU */ +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_FUTEX_H */ -- cgit v1.1 From 95d38d144ab4520aea3f8fcfacc5fd62d3bf2697 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:41 +0000 Subject: drm/nouveau: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_display.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 7bf22d4..f17dc2a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -638,17 +638,8 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, } s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head); - if (s->event) { - struct drm_pending_vblank_event *e = s->event; - struct timeval now; - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (s->event) + drm_send_vblank_event(dev, -1, s->event); list_del(&s->head); if (ps) -- cgit v1.1 From 26ae466732c181b7376610fd9241787698179b01 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:42 +0000 Subject: drm/radeon: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index e38fd55..eb18bb7 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -271,8 +271,6 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; struct radeon_unpin_work *work; - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; u32 update_pending; int vpos, hpos; @@ -328,14 +326,9 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) radeon_crtc->unpin_work = NULL; /* wakeup userspace */ - if (work->event) { - e = work->event; - e->event.sequence = drm_vblank_count_and_time(rdev->ddev, crtc_id, &now); - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (work->event) + drm_send_vblank_event(rdev->ddev, crtc_id, work->event); + spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id); -- cgit v1.1 From f7e96d7e28817a66db36e89f25b77bda7dba6da0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:45 +0000 Subject: drm/shmob: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index 7dff49e..99e2034 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -451,27 +451,16 @@ void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc) { struct drm_pending_vblank_event *event; struct drm_device *dev = scrtc->crtc.dev; - struct timeval vblanktime; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); event = scrtc->event; scrtc->event = NULL; + if (event) { + drm_send_vblank_event(dev, 0, event); + drm_vblank_put(dev, 0); + } spin_unlock_irqrestore(&dev->event_lock, flags); - - if (event == NULL) - return; - - event->event.sequence = drm_vblank_count_and_time(dev, 0, &vblanktime); - event->event.tv_sec = vblanktime.tv_sec; - event->event.tv_usec = vblanktime.tv_usec; - - spin_lock_irqsave(&dev->event_lock, flags); - list_add_tail(&event->base.link, &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - - drm_vblank_put(dev, 0); } static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc, -- cgit v1.1 From 0eca56f9467038ee0b798637f03581aaa1186fac Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:46 +0000 Subject: drm/imx: use drm_send_vblank_event() helper Also, slightly changes the behavior to always put the vblank irq, even if userspace did not request a vblank event. As far as I can tell, the previous code would leak a vblank irq refcnt if userspace requested a pageflip without event. Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/staging/imx-drm/ipuv3-crtc.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index b028b0d..1cd74f5 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -311,31 +311,14 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc) { - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; struct drm_device *drm = ipu_crtc->base.dev; spin_lock_irqsave(&drm->event_lock, flags); - - e = ipu_crtc->page_flip_event; - if (!e) { - spin_unlock_irqrestore(&drm->event_lock, flags); - return; - } - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + if (ipu_crtc->page_flip_event) + drm_send_vblank_event(drm, -1, ipu_crtc->page_flip_event); ipu_crtc->page_flip_event = NULL; - imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); - - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - - wake_up_interruptible(&e->base.file_priv->event_wait); - spin_unlock_irqrestore(&drm->event_lock, flags); } -- cgit v1.1 From 41eab402b43f1ca3e1279595bc138f5ac2a914f7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:05 +0530 Subject: drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL exynos_drm_framebuffer_init() does not return NULL. Use IS_ERR instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 68f0045..8f007aa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -182,7 +182,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { + if (IS_ERR(helper->fb)) { DRM_ERROR("failed to create drm framebuffer.\n"); ret = PTR_ERR(helper->fb); goto err_destroy_gem; -- cgit v1.1 From f02504587ed5669cc721a1f2351322e6badfe67f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:06 +0530 Subject: drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL None of these functions actually return a NULL pointer. Hence use IS_ERR() instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 29d2ad3..5c4764a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -222,7 +222,7 @@ static struct exynos_drm_ippdrv *ipp_find_driver(struct ipp_context *ctx, /* find ipp driver using idr */ ippdrv = ipp_find_obj(&ctx->ipp_idr, &ctx->ipp_lock, ipp_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("not found ipp%d driver.\n", ipp_id); return ippdrv; } @@ -388,7 +388,7 @@ static int ipp_find_and_set_property(struct drm_exynos_ipp_property *property) DRM_DEBUG_KMS("%s:prop_id[%d]\n", __func__, prop_id); ippdrv = ipp_find_drv_by_handle(prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -492,7 +492,7 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, /* find ipp driver using ipp id */ ippdrv = ipp_find_driver(ctx, property); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -521,19 +521,19 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, c_node->state = IPP_STATE_IDLE; c_node->start_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->start_work)) { + if (IS_ERR(c_node->start_work)) { DRM_ERROR("failed to create start work.\n"); goto err_clear; } c_node->stop_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->stop_work)) { + if (IS_ERR(c_node->stop_work)) { DRM_ERROR("failed to create stop work.\n"); goto err_free_start; } c_node->event_work = ipp_create_event_work(); - if (IS_ERR_OR_NULL(c_node->event_work)) { + if (IS_ERR(c_node->event_work)) { DRM_ERROR("failed to create event work.\n"); goto err_free_stop; } @@ -915,7 +915,7 @@ static int ipp_queue_buf_with_run(struct device *dev, DRM_DEBUG_KMS("%s\n", __func__); ippdrv = ipp_find_drv_by_handle(qbuf->prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EFAULT; } -- cgit v1.1 From 4c1d8def9d5bbd642782893ccd849963f1811ae6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:32:06 +0200 Subject: drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Acked-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc384..7e99853 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2082,7 +2082,7 @@ static int hdmi_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(hdata->irq, hdata); + free_irq(hdata->irq, ctx); /* hdmiphy i2c driver */ -- cgit v1.1 From 94d019b87859bb984bd6c15db330d404eab3acaa Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 14:50:44 -0500 Subject: drm/exynos: page flip fixes The event wouldn't be on any list at this point, so nothing to delete it from. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e8894bc..02b3608 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -217,7 +217,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); - list_del(&event->base.link); goto out; } -- cgit v1.1 From e3de42b68478a8c95dd27520e9adead2af9477a5 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 19:44:07 +0200 Subject: drm/i915: force full modeset if the connector is in DPMS OFF mode Currently the driver's assumed behavior for a modeset with an attached FB is that the corresponding connector will be switched to DPMS ON mode if it happened to be in DPMS OFF (or another power save mode). This wasn't enforced though if only the FB changed, everything else (format, connector etc.) remaining the same. In this case we only set the new FB base and left the connector in the old power save mode. Fix this by forcing a full modeset whenever there is an attached FB and any affected connector is in a power save mode. V_2: Run the test for encoders in power save mode outside the the test for fb change: user space may have just disabled the encoders but left everything else in place. Make sure the connector list is not empty before running this test. Signed-off-by: Imre Deak Signed-off-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61642 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59834 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64178 Acked-by: Jesse Barnes [danvet: Apply Jani's s/connector_off/is_crtc_connector_off bikeshed.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 300942a..ad1117b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8140,6 +8140,21 @@ static void intel_set_config_restore_state(struct drm_device *dev, } } +static bool +is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, + int num_connectors) +{ + int i; + + for (i = 0; i < num_connectors; i++) + if (connectors[i].encoder && + connectors[i].encoder->crtc == crtc && + connectors[i].dpms != DRM_MODE_DPMS_ON) + return true; + + return false; +} + static void intel_set_config_compute_mode_changes(struct drm_mode_set *set, struct intel_set_config *config) @@ -8147,7 +8162,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->crtc->fb != set->fb) { + if (set->connectors != NULL && + is_crtc_connector_off(set->crtc, *set->connectors, + set->num_connectors)) { + config->mode_changed = true; + } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); @@ -8157,8 +8176,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, } else if (set->fb->pixel_format != set->crtc->fb->pixel_format) { config->mode_changed = true; - } else + } else { config->fb_changed = true; + } } if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) -- cgit v1.1 From df97729f1bcb5055ba414f08b48364d46c6baef0 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:17 +0300 Subject: drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5dcf7f..b9d00dc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1943,4 +1943,19 @@ static inline void __user *to_user_ptr(u64 address) return (void __user *)(uintptr_t)address; } +static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) +{ + unsigned long j = msecs_to_jiffies(m); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + +static inline unsigned long +timespec_to_jiffies_timeout(const struct timespec *value) +{ + unsigned long j = timespec_to_jiffies(value); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + #endif -- cgit v1.1 From 2554fc1fa6dc184ca553f73e3796fa59745efa8a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:18 +0300 Subject: drm/i915: use msecs_to_jiffies_timeout instead of open coding the same Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5d245031..98cd8535 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -228,7 +228,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, * need to wake up periodically and check that ourselves. */ I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en); - for (i = 0; i < msecs_to_jiffies(50) + 1; i++) { + for (i = 0; i < msecs_to_jiffies_timeout(50); i++) { prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait, TASK_UNINTERRUPTIBLE); -- cgit v1.1 From e054cc3937a4a58e77870d4c922a7b21824b610a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:19 +0300 Subject: drm/i915: avoid premature timeouts in __wait_seqno() At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6165535..a6cf8e8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1003,7 +1003,7 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, wait_forever = false; } - timeout_jiffies = timespec_to_jiffies(&wait_time); + timeout_jiffies = timespec_to_jiffies_timeout(&wait_time); if (WARN_ON(!ring->irq_get(ring))) return -ENODEV; -- cgit v1.1 From 3598706b52cb45ba0a9e8aa99ce5ac59140f2b8b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:20 +0300 Subject: drm/i915: avoid premature DP AUX timeouts During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3d704b7..70789b1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -303,7 +303,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, - msecs_to_jiffies(10)); + msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 98cd8535..639fe19 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -263,7 +263,8 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv) /* Important: The hw handles only the first bit, so set only one! */ I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN); - ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10); + ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(10)); I915_WRITE(GMBUS4 + reg_offset, 0); -- cgit v1.1 From 0b6e81d1658e2aa6b3acc942088c529fee5aa62e Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:25 +0200 Subject: ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 0f6f481..1a17c85 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -225,7 +225,7 @@ static const char * const mic_bias_level_text[] = { }; static const struct soc_enum mic_bias_level_enum = - SOC_ENUM_SINGLE(CS42L52_IFACE_CTL1, 0, + SOC_ENUM_SINGLE(CS42L52_IFACE_CTL2, 0, ARRAY_SIZE(mic_bias_level_text), mic_bias_level_text); static const char * const cs42l52_mic_text[] = { "Single", "Differential" }; -- cgit v1.1 From 99674c721fd9393030365b66cbbceaa193b0c0fd Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:26 +0200 Subject: ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" controls. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 1a17c85..8465c1fa 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -413,7 +413,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_ENUM("Headphone Analog Gain", hp_gain_enum), SOC_DOUBLE_R_SX_TLV("Speaker Volume", CS42L52_SPKA_VOL, - CS42L52_SPKB_VOL, 7, 0x1, 0xff, hl_tlv), + CS42L52_SPKB_VOL, 0, 0x1, 0xff, hl_tlv), SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL, CS42L52_PASSTHRUB_VOL, 6, 0x18, 0x90, pga_tlv), @@ -441,7 +441,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 6, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, hl_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), -- cgit v1.1 From 40e2516acb426f349c70e3bada821f3203b69de2 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:27 +0200 Subject: ASoC: cs42l52: fix master playback mute mask. The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.h b/sound/soc/codecs/cs42l52.h index 60985c0..4277012 100644 --- a/sound/soc/codecs/cs42l52.h +++ b/sound/soc/codecs/cs42l52.h @@ -157,7 +157,7 @@ #define CS42L52_PB_CTL1_INV_PCMA (1 << 2) #define CS42L52_PB_CTL1_MSTB_MUTE (1 << 1) #define CS42L52_PB_CTL1_MSTA_MUTE (1 << 0) -#define CS42L52_PB_CTL1_MUTE_MASK 0xFFFD +#define CS42L52_PB_CTL1_MUTE_MASK 0x03 #define CS42L52_PB_CTL1_MUTE 3 #define CS42L52_PB_CTL1_UNMUTE 0 -- cgit v1.1 From b5dd0bb43e209455fb83161d4c8774ce2c23f6e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 23 May 2013 08:04:09 +0200 Subject: microblaze: Use proper casting for inb/inw/inl in io.h We are going to move to asm-generic/io.h but let's fix compilation warnings first for 3.10. Warning message: arch/microblaze/include/asm/io.h:126:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] #define inb(port) readb((u8 *)((port))) ... Signed-off-by: Michal Simek --- arch/microblaze/include/asm/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cb8a85..2565cb9 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -123,11 +123,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) * inb_p/inw_p/... * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port))) +#define inb(port) readb((u8 *)((unsigned long)(port))) #define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) +#define inw(port) readw((u16 *)((unsigned long)(port))) #define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) +#define inl(port) readl((u32 *)((unsigned long)(port))) #define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) -- cgit v1.1 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- drivers/gpu/drm/omapdrm/omap_drv.c | 3 +++ drivers/media/platform/omap/omap_vout.c | 3 +++ drivers/video/omap2/dss/core.c | 20 +++++++++++++++++++- drivers/video/omap2/omapfb/omapfb-main.c | 3 +++ include/video/omapdss.h | 1 + 5 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 079c54c..902074b 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -548,6 +548,9 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + DBG("%s", device->name); return drm_platform_init(&omap_drm_driver, device); } diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 96c4a17..0a489bd 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -2144,6 +2144,9 @@ static int __init omap_vout_probe(struct platform_device *pdev) struct omap_dss_device *def_display; struct omap2video_device *vid_dev = NULL; + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + ret = omapdss_compat_init(); if (ret) { dev_err(&pdev->dev, "failed to init dss\n"); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index f8779d4..f49ddb9 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -53,6 +53,8 @@ static char *def_disp_name; module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); +static bool dss_initialized; + const char *omapdss_get_default_display_name(void) { return core.default_display_name; @@ -66,6 +68,12 @@ enum omapdss_version omapdss_get_version(void) } EXPORT_SYMBOL(omapdss_get_version); +bool omapdss_is_initialized(void) +{ + return dss_initialized; +} +EXPORT_SYMBOL(omapdss_is_initialized); + struct platform_device *dss_get_core_pdev(void) { return core.pdev; @@ -606,6 +614,8 @@ static int __init omap_dss_init(void) return r; } + dss_initialized = true; + return 0; } @@ -636,7 +646,15 @@ static int __init omap_dss_init(void) static int __init omap_dss_init2(void) { - return omap_dss_register_drivers(); + int r; + + r = omap_dss_register_drivers(); + if (r) + return r; + + dss_initialized = true; + + return 0; } core_initcall(omap_dss_init); diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 717f13a..bb5f9fe 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2416,6 +2416,9 @@ static int __init omapfb_probe(struct platform_device *pdev) DBG("omapfb_probe\n"); + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + if (pdev->num_resources != 0) { dev_err(&pdev->dev, "probed for an unknown device\n"); r = -ENODEV; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa09..9b52340 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v1.1 From c5cca97fb915a90b1dcddf737062e67dd8656af8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 22 May 2013 11:48:40 +0900 Subject: drm/exynos: use drm_send_vblank_event() helper Rebased. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 02b3608..db3decf 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -397,7 +397,6 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; - struct timeval now; unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -410,13 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) if (crtc != e->pipe) continue; - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - - list_move_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); + list_del(&e->base.link); + drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); } -- cgit v1.1 From 20cd2640a295cab46bcd08f4788984ca236fc148 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 21 May 2013 16:55:58 +0900 Subject: drm/exynos: wait for the completion of pending page flip This patch fixes the issue that drm_vblank_get() is failed. The issus occurs when next page flip request is tried if previous page flip event wasn't completed yet and then dpms became off. So this patch make sure that page flip event is completed before dpms goes to off. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index db3decf..c200e4d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -48,6 +48,8 @@ struct exynos_drm_crtc { unsigned int pipe; unsigned int dpms; enum exynos_crtc_mode mode; + wait_queue_head_t pending_flip_queue; + atomic_t pending_flip; }; static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -61,6 +63,13 @@ static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) return; } + if (mode > DRM_MODE_DPMS_ON) { + /* wait for the completion of page flip. */ + wait_event(exynos_crtc->pending_flip_queue, + atomic_read(&exynos_crtc->pending_flip) == 0); + drm_vblank_off(crtc->dev, exynos_crtc->pipe); + } + exynos_drm_fn_encoder(crtc, &mode, exynos_drm_encoder_crtc_dpms); exynos_crtc->dpms = mode; } @@ -224,6 +233,7 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, spin_lock_irq(&dev->event_lock); list_add_tail(&event->base.link, &dev_priv->pageflip_event_list); + atomic_set(&exynos_crtc->pending_flip, 1); spin_unlock_irq(&dev->event_lock); crtc->fb = fb; @@ -343,6 +353,8 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr) exynos_crtc->pipe = nr; exynos_crtc->dpms = DRM_MODE_DPMS_OFF; + init_waitqueue_head(&exynos_crtc->pending_flip_queue); + atomic_set(&exynos_crtc->pending_flip, 0); exynos_crtc->plane = exynos_plane_init(dev, 1 << nr, true); if (!exynos_crtc->plane) { kfree(exynos_crtc); @@ -397,6 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; + struct drm_crtc *drm_crtc = dev_priv->crtc[crtc]; + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(drm_crtc); unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -412,6 +426,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) list_del(&e->base.link); drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); + atomic_set(&exynos_crtc->pending_flip, 0); + wake_up(&exynos_crtc->pending_flip_queue); } spin_unlock_irqrestore(&dev->event_lock, flags); -- cgit v1.1 From d873ab99acd23dcd6860d8e605bc3146a4d4d9a2 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:14 +0900 Subject: drm/exynos: cleanup device pointer usages Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 +++--- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 4 ++-- drivers/gpu/drm/exynos/exynos_hdmi.c | 14 +++++++------- drivers/gpu/drm/exynos/exynos_mixer.c | 14 +++++++------- 9 files changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 773f583..754d760 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1884,7 +1884,7 @@ static int fimc_probe(struct platform_device *pdev) goto err_pm_dis; } - dev_info(&pdev->dev, "drm fimc registered successfully.\n"); + dev_info(dev, "drm fimc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 746b282..97c61db 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -885,7 +885,7 @@ static int fimd_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("memory allocation for pdata failed\n"); @@ -899,7 +899,7 @@ static int fimd_probe(struct platform_device *pdev) return ret; } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; if (!pdata) { DRM_ERROR("no platform data specified\n"); return -EINVAL; @@ -912,7 +912,7 @@ static int fimd_probe(struct platform_device *pdev) return -EINVAL; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -930,7 +930,7 @@ static int fimd_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(&pdev->dev, res); + ctx->regs = devm_ioremap_resource(dev, res); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); @@ -942,7 +942,7 @@ static int fimd_probe(struct platform_device *pdev) ctx->irq = res->start; - ret = devm_request_irq(&pdev->dev, ctx->irq, fimd_irq_handler, + ret = devm_request_irq(dev, ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx); if (ret) { dev_err(dev, "irq request failed.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 47a493c..af75434 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1379,7 +1379,7 @@ static int g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -1417,7 +1417,7 @@ static int g2d_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - g2d->regs = devm_ioremap_resource(&pdev->dev, res); + g2d->regs = devm_ioremap_resource(dev, res); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; @@ -1430,7 +1430,7 @@ static int g2d_probe(struct platform_device *pdev) goto err_put_clk; } - ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 7841c3b..487595a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1743,7 +1743,7 @@ static int gsc_probe(struct platform_device *pdev) goto err_ippdrv_register; } - dev_info(&pdev->dev, "drm gsc registered successfully.\n"); + dev_info(dev, "drm gsc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index ba2f0f1..437fb94 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -442,7 +442,7 @@ static int exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 5c4764a..be1e884 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -1909,7 +1909,7 @@ static int ipp_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -1963,7 +1963,7 @@ static int ipp_probe(struct platform_device *pdev) goto err_cmd_workq; } - dev_info(&pdev->dev, "drm ipp registered successfully.\n"); + dev_info(dev, "drm ipp registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 9504b0c..24376c1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -594,7 +594,7 @@ static int vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -612,7 +612,7 @@ static int vidi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); - ret = device_create_file(&pdev->dev, &dev_attr_connection); + ret = device_create_file(dev, &dev_attr_connection); if (ret < 0) DRM_INFO("failed to create connection sysfs.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 7e99853..8d5dcd1 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1946,14 +1946,14 @@ static int hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("[%d]\n", __LINE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = drm_hdmi_dt_parse_pdata(dev); if (IS_ERR(pdata)) { DRM_ERROR("failed to parse dt\n"); return PTR_ERR(pdata); } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; } if (!pdata) { @@ -1961,14 +1961,14 @@ static int hdmi_probe(struct platform_device *pdev) return -EINVAL; } - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - hdata = devm_kzalloc(&pdev->dev, sizeof(struct hdmi_context), + hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); if (!hdata) { DRM_ERROR("out of memory\n"); @@ -1985,7 +1985,7 @@ static int hdmi_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(hdmi_match_types), - pdev->dev.of_node); + dev->of_node); if (match == NULL) return -ENODEV; hdata->type = (enum hdmi_type)match->data; @@ -2010,11 +2010,11 @@ static int hdmi_probe(struct platform_device *pdev) return -ENOENT; } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); + hdata->regs = devm_ioremap_resource(dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); - ret = devm_gpio_request(&pdev->dev, hdata->hpd_gpio, "HPD"); + ret = devm_gpio_request(dev, hdata->hpd_gpio, "HPD"); if (ret) { DRM_ERROR("failed to request HPD gpio\n"); return ret; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ec3e376..7c197d38 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1061,7 +1061,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->mixer_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->mixer_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->mixer_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1074,7 +1074,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - ret = devm_request_irq(&pdev->dev, res->start, mixer_irq_handler, + ret = devm_request_irq(dev, res->start, mixer_irq_handler, 0, "drm_mixer", ctx); if (ret) { dev_err(dev, "request interrupt failed.\n"); @@ -1118,7 +1118,7 @@ static int vp_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->vp_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->vp_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->vp_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1169,14 +1169,14 @@ static int mixer_probe(struct platform_device *pdev) dev_info(dev, "probe start\n"); - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_ERROR("failed to alloc mixer context.\n"); return -ENOMEM; @@ -1187,14 +1187,14 @@ static int mixer_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), - pdev->dev.of_node); + dev->of_node); drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; } - ctx->dev = &pdev->dev; + ctx->dev = dev; ctx->parent_ctx = (void *)drm_hdmi_ctx; drm_hdmi_ctx->ctx = (void *)ctx; ctx->vp_enabled = drv->is_vp_enabled; -- cgit v1.1 From a3ad6976fe5a306fc6cb9e423ac0ef2f06f79189 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:15 +0900 Subject: drm/exynos: fix build warnings from ipp fimc Becuase of order of headers, there are build warnings and they are fixed with this patch. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 754d760..75c50f5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -12,9 +12,9 @@ * */ #include -#include #include #include +#include #include #include #include -- cgit v1.1 From 7a1b00e0728ff20d6c8e2d6335da05d13d03ef74 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:16 +0900 Subject: drm/exynos: remove unnecessary devm_kfree devm_kfree does not need for fail case of probe function and for remove function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 -- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 487595a..98032d6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1748,7 +1748,6 @@ static int gsc_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_get_irq: free_irq(ctx->irq, ctx); @@ -1761,7 +1760,6 @@ static int gsc_remove(struct platform_device *pdev) struct gsc_context *ctx = get_gsc_context(dev); struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); mutex_destroy(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 947f09f..3aa502a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -709,7 +709,6 @@ static int rotator_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_clk_get: free_irq(rot->irq, rot); @@ -722,7 +721,6 @@ static int rotator_remove(struct platform_device *pdev) struct rot_context *rot = dev_get_drvdata(dev); struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); pm_runtime_disable(dev); -- cgit v1.1 From dcb9a7c74acf59679a537e6fcc7a99c12353e7b8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:17 +0900 Subject: drm/exynos: replace request_threaded_irq with devm function devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_gsc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_rotator.c | 11 +++-------- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +------ 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 75c50f5..4a1616a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1845,7 +1845,7 @@ static int fimc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, fimc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, fimc_irq_handler, IRQF_ONESHOT, "drm_fimc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1854,7 +1854,7 @@ static int fimc_probe(struct platform_device *pdev) ret = fimc_setup_clocks(ctx); if (ret < 0) - goto err_free_irq; + return ret; ippdrv = &ctx->ippdrv; ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &fimc_src_ops; @@ -1892,8 +1892,6 @@ err_pm_dis: pm_runtime_disable(dev); err_put_clk: fimc_put_clocks(ctx); -err_free_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1911,8 +1909,6 @@ static int fimc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 98032d6..762f40d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1704,7 +1704,7 @@ static int gsc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, gsc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, gsc_irq_handler, IRQF_ONESHOT, "drm_gsc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1725,7 +1725,7 @@ static int gsc_probe(struct platform_device *pdev) ret = gsc_init_prop_list(ippdrv); if (ret < 0) { dev_err(dev, "failed to init property list.\n"); - goto err_get_irq; + return ret; } DRM_DEBUG_KMS("%s:id[%d]ippdrv[0x%x]\n", __func__, ctx->id, @@ -1749,8 +1749,6 @@ static int gsc_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_get_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1766,8 +1764,6 @@ static int gsc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 3aa502a..9b6c709 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -666,8 +666,8 @@ static int rotator_probe(struct platform_device *pdev) return rot->irq; } - ret = request_threaded_irq(rot->irq, NULL, rotator_irq_handler, - IRQF_ONESHOT, "drm_rotator", rot); + ret = devm_request_threaded_irq(dev, rot->irq, NULL, + rotator_irq_handler, IRQF_ONESHOT, "drm_rotator", rot); if (ret < 0) { dev_err(dev, "failed to request irq\n"); return ret; @@ -676,8 +676,7 @@ static int rotator_probe(struct platform_device *pdev) rot->clock = devm_clk_get(dev, "rotator"); if (IS_ERR(rot->clock)) { dev_err(dev, "failed to get clock\n"); - ret = PTR_ERR(rot->clock); - goto err_clk_get; + return PTR_ERR(rot->clock); } pm_runtime_enable(dev); @@ -710,8 +709,6 @@ static int rotator_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_clk_get: - free_irq(rot->irq, rot); return ret; } @@ -725,8 +722,6 @@ static int rotator_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(rot->irq, rot); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 8d5dcd1..2f78532 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2046,7 +2046,7 @@ static int hdmi_probe(struct platform_device *pdev) hdata->hpd = gpio_get_value(hdata->hpd_gpio); - ret = request_threaded_irq(hdata->irq, NULL, + ret = devm_request_threaded_irq(dev, hdata->irq, NULL, hdmi_irq_thread, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "hdmi", drm_hdmi_ctx); @@ -2075,16 +2075,11 @@ err_ddc: static int hdmi_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); pm_runtime_disable(dev); - free_irq(hdata->irq, ctx); - - /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); /* DDC i2c driver */ -- cgit v1.1 From d47333ddb234dbc661ab2a4fe019758bd33ba33b Mon Sep 17 00:00:00 2001 From: Torsten Schenk Date: Thu, 23 May 2013 13:38:29 +0200 Subject: ALSA: usb-6fire: Modify firmware version check Check only the uppermost 16 bits instead of the whole 32 bits of the version information. Do this because all firmware version tested with this version information worked correctly and the strict check causes problems for several users. Signed-off-by: Torsten Schenk Signed-off-by: Takashi Iwai --- sound/usb/6fire/firmware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index a1d9b07..b9defcd 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -42,8 +42,8 @@ static const u8 ep_w_max_packet_size[] = { 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ }; -static const u8 known_fw_versions[][4] = { - { 0x03, 0x01, 0x0b, 0x00 } +static const u8 known_fw_versions[][2] = { + { 0x03, 0x01 } }; struct ihex_record { @@ -343,7 +343,7 @@ static int usb6fire_fw_check(u8 *version) int i; for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++) - if (!memcmp(version, known_fw_versions + i, 4)) + if (!memcmp(version, known_fw_versions + i, 2)) return 0; snd_printk(KERN_ERR PREFIX "invalid fimware version in device: %*ph. " -- cgit v1.1 From ca1643186d3dce6171d8f171e516b02496360a9e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 11:51:10 -0400 Subject: tracing: Fix crash when ftrace=nop on the kernel command line If ftrace= is on the kernel command line, when that tracer is registered, it will be initiated by tracing_set_tracer() to execute that tracer. The nop tracer is just a stub tracer that is used to have no tracer enabled. It is assigned at early bootup as it is the default tracer. But if ftrace=nop is on the kernel command line, the registering of the nop tracer will call tracing_set_tracer() which will try to execute the nop tracer. But it expects tr->current_trace to be assigned something as it usually is assigned to the nop tracer. As it hasn't been assigned to anything yet, it causes the system to crash. The simple fix is to move the tr->current_trace = nop before registering the nop tracer. The functionality is still the same as the nop tracer doesn't do anything anyway. Reported-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ae6fa2d..4d79485 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6216,10 +6216,15 @@ __init static int tracer_alloc_buffers(void) trace_init_cmdlines(); - register_tracer(&nop_trace); - + /* + * register_tracer() might reference current_trace, so it + * needs to be set before we register anything. This is + * just a bootstrap of current_trace anyway. + */ global_trace.current_trace = &nop_trace; + register_tracer(&nop_trace); + /* All seems OK, enable tracing */ tracing_disabled = 0; -- cgit v1.1 From 726dcaa158b316f02f7dec2cf6dbf61c30a8bf22 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 20 May 2013 08:12:57 +0100 Subject: arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)' Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig. The related errors: ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined! ERROR: "clear_page" [fs/fuse/fuse.ko] undefined! ERROR: "clear_page" [fs/ext3/ext3.ko] undefined! ERROR: "clear_page" [fs/ext2/ext2.ko] undefined! ERROR: "clear_page" [fs/exofs/libore.ko] undefined! ERROR: "clear_page" [fs/exofs/exofs.ko] undefined! ERROR: "clear_page" [drivers/block/brd.ko] undefined! Signed-off-by: Chen Gang Signed-off-by: Catalin Marinas --- arch/arm64/kernel/arm64ksyms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 7df1aad..41b4f62 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); -- cgit v1.1 From 953dbbed9ee310100bc841cdea8f992d192531c6 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 21 May 2013 12:16:56 +0100 Subject: arm64: Do not report user faults for handled signals Currently user faults (page, undefined instruction) are always reported even though the user may have a signal handler for them. This patch adds unhandled_signal() check together with printk_ratelimit() for these cases. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/traps.c | 5 +++-- arch/arm64/mm/fault.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 61d7dd2..f1ff9ba 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) return; #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(current, SIGILL) && + printk_ratelimit()) { pr_info("%s[%d]: undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); dump_instr(KERN_INFO, regs); @@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) } #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && printk_ratelimit()) { pr_info("%s[%d]: syscall %d\n", current->comm, task_pid_nr(current), (int)regs->syscallno); dump_instr("", regs); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 98af6e7..1426468 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, { struct siginfo si; - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(tsk, sig) && + printk_ratelimit()) { pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n", tsk->comm, task_pid_nr(tsk), fault_name(esr), sig, addr, esr); -- cgit v1.1 From 62106e96279f66c52e2123782f9420af9dbe8cbe Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc30251..20efd81 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v1.1 From 166faf21bd14bc5c5295a44874bf7f3930c30b20 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: fix potential buffer overrun when composing a new options string Consider the case where we have a very short ip= string in the original mount options, and when we chase a referral we end up with a very long IPv6 address. Be sure to allow for that possibility when estimating the size of the string to allocate. Cc: Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e33ec6..8e5a181 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "cifsglob.h" #include "cifsproto.h" #include "cifsfs.h" @@ -150,7 +151,8 @@ char *cifs_compose_mount_options(const char *sb_mountdata, * assuming that we have 'unc=' and 'ip=' in * the original sb_mountdata */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12; + md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + + INET6_ADDRSTRLEN; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; -- cgit v1.1 From 539673fff76af73c3aee96e0de10edcc97d84db3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: allow sec=none mounts to work against servers that don't support extended security In the case of sec=none, we're not sending a username or password, so there's little benefit to mandating NTLMSSP auth. Allow it to use unencapsulated auth in that case. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 99eeaa1..0a7fdc3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1061,6 +1061,7 @@ static int cifs_parse_security_flavors(char *value, #endif case Opt_sec_none: vol->nullauth = 1; + vol->secFlg |= CIFSSEC_MAY_NTLM; break; default: cifs_dbg(VFS, "bad security option: %s\n", value); -- cgit v1.1 From 37d4f99b55d46d9f71f4769faf74c95adb2c1daf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: fix error handling when calling cifs_parse_devname When we allowed separate unc= and prefixpath= mount options, we could ignore EINVAL errors from cifs_parse_devname. Now that they are deprecated, we need to check for that as well and fail the mount if it's malformed. Also fix a later error message that refers to the unc= option. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0a7fdc3..5b97e56 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1258,14 +1258,18 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->backupuid_specified = false; /* no backup intent for a user */ vol->backupgid_specified = false; /* no backup intent for a group */ - /* - * For now, we ignore -EINVAL errors under the assumption that the - * unc= and prefixpath= options will be usable. - */ - if (cifs_parse_devname(devname, vol) == -ENOMEM) { - printk(KERN_ERR "CIFS: Unable to allocate memory to parse " - "device string.\n"); - goto out_nomem; + switch (cifs_parse_devname(devname, vol)) { + case 0: + break; + case -ENOMEM: + cifs_dbg(VFS, "Unable to allocate memory for devname.\n"); + goto cifs_parse_mount_err; + case -EINVAL: + cifs_dbg(VFS, "Malformed UNC in devname.\n"); + goto cifs_parse_mount_err; + default: + cifs_dbg(VFS, "Unknown error parsing devname.\n"); + goto cifs_parse_mount_err; } while ((data = strsep(&options, separator)) != NULL) { @@ -1827,7 +1831,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, } #endif if (!vol->UNC) { - cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string or in unc= option!\n"); + cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string!\n"); goto cifs_parse_mount_err; } -- cgit v1.1 From 9c9c29e1af2ff0459087876e3800078555794b60 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: stop printing the unc= option in /proc/mounts Since we no longer recognize that option, stop printing it out. The devicename is now the canonical source for this info. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 72e4efe..3752b9f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -372,9 +372,6 @@ cifs_show_options(struct seq_file *s, struct dentry *root) cifs_show_security(s, tcon->ses->server); cifs_show_cache_flavor(s, cifs_sb); - seq_printf(s, ",unc="); - seq_escape(s, tcon->treeName, " \t\n\\"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) seq_printf(s, ",multiuser"); else if (tcon->ses->user_name) -- cgit v1.1 From d9deef0a3f38bcc1c155e8d9a8b522404e5e648c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:06 -0400 Subject: cifs: fix composing of mount options for DFS referrals With the change to ignore the unc= and prefixpath= mount options, there is no longer any need to add them to the options string when mounting. By the same token, we now need to build a device name that includes the prefixpath when mounting. To make things neater, the delimiters on the devicename are changed to '/' since that's preferred when mounting anyway. v2: fix some comments and don't bother looking at whether there is a prepath in the ref->node_name when deciding whether to pass a prepath to cifs_build_devname. v3: rebase on top of potential buffer overrun fix for stable Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 141 +++++++++++++++++++++++++------------------------ fs/cifs/dns_resolve.c | 4 +- 2 files changed, 73 insertions(+), 72 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e5a181..58df174 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -49,58 +49,74 @@ void cifs_dfs_release_automount_timer(void) } /** - * cifs_get_share_name - extracts share name from UNC - * @node_name: pointer to UNC string + * cifs_build_devname - build a devicename from a UNC and optional prepath + * @nodename: pointer to UNC string + * @prepath: pointer to prefixpath (or NULL if there isn't one) * - * Extracts sharename form full UNC. - * i.e. strips from UNC trailing path that is not part of share - * name and fixup missing '\' in the beginning of DFS node refferal - * if necessary. - * Returns pointer to share name on success or ERR_PTR on error. - * Caller is responsible for freeing returned string. + * Build a new cifs devicename after chasing a DFS referral. Allocate a buffer + * big enough to hold the final thing. Copy the UNC from the nodename, and + * concatenate the prepath onto the end of it if there is one. + * + * Returns pointer to the built string, or a ERR_PTR. Caller is responsible + * for freeing the returned string. */ -static char *cifs_get_share_name(const char *node_name) +static char * +cifs_build_devname(char *nodename, const char *prepath) { - int len; - char *UNC; - char *pSep; - - len = strlen(node_name); - UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */, - GFP_KERNEL); - if (!UNC) - return ERR_PTR(-ENOMEM); + size_t pplen; + size_t unclen; + char *dev; + char *pos; + + /* skip over any preceding delimiters */ + nodename += strspn(nodename, "\\"); + if (!*nodename) + return ERR_PTR(-EINVAL); - /* get share name and server name */ - if (node_name[1] != '\\') { - UNC[0] = '\\'; - strncpy(UNC+1, node_name, len); - len++; - UNC[len] = 0; - } else { - strncpy(UNC, node_name, len); - UNC[len] = 0; - } + /* get length of UNC and set pos to last char */ + unclen = strlen(nodename); + pos = nodename + unclen - 1; - /* find server name end */ - pSep = memchr(UNC+2, '\\', len-2); - if (!pSep) { - cifs_dbg(VFS, "%s: no server name end in node name: %s\n", - __func__, node_name); - kfree(UNC); - return ERR_PTR(-EINVAL); + /* trim off any trailing delimiters */ + while (*pos == '\\') { + --pos; + --unclen; } - /* find sharename end */ - pSep++; - pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); - if (pSep) { - /* trim path up to sharename end - * now we have share name in UNC */ - *pSep = 0; + /* allocate a buffer: + * +2 for preceding "//" + * +1 for delimiter between UNC and prepath + * +1 for trailing NULL + */ + pplen = prepath ? strlen(prepath) : 0; + dev = kmalloc(2 + unclen + 1 + pplen + 1, GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + pos = dev; + /* add the initial "//" */ + *pos = '/'; + ++pos; + *pos = '/'; + ++pos; + + /* copy in the UNC portion from referral */ + memcpy(pos, nodename, unclen); + pos += unclen; + + /* copy the prefixpath remainder (if there is one) */ + if (pplen) { + *pos = '/'; + ++pos; + memcpy(pos, prepath, pplen); + pos += pplen; } - return UNC; + /* NULL terminator */ + *pos = '\0'; + + convert_delimiter(dev, '/'); + return dev; } @@ -124,6 +140,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata, { int rc; char *mountdata = NULL; + const char *prepath = NULL; int md_len; char *tkn_e; char *srvIP = NULL; @@ -133,7 +150,10 @@ char *cifs_compose_mount_options(const char *sb_mountdata, if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref->node_name); + if (strlen(fullpath) - ref->path_consumed) + prepath = fullpath + ref->path_consumed; + + *devname = cifs_build_devname(ref->node_name, prepath); if (IS_ERR(*devname)) { rc = PTR_ERR(*devname); *devname = NULL; @@ -147,13 +167,14 @@ char *cifs_compose_mount_options(const char *sb_mountdata, goto compose_mount_options_err; } - /* md_len = strlen(...) + 12 for 'sep+prefixpath=' - * assuming that we have 'unc=' and 'ip=' in - * the original sb_mountdata + /* + * In most cases, we'll be building a shorter string than the original, + * but we do have to assume that the address in the ip= option may be + * much longer than the original. Add the max length of an address + * string to the length of the original string to allow for worst case. */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + - INET6_ADDRSTRLEN; - mountdata = kzalloc(md_len+1, GFP_KERNEL); + md_len = strlen(sb_mountdata) + INET6_ADDRSTRLEN; + mountdata = kzalloc(md_len + 1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; goto compose_mount_options_err; @@ -197,26 +218,6 @@ char *cifs_compose_mount_options(const char *sb_mountdata, strncat(mountdata, &sep, 1); strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strncat(mountdata, &sep, 1); - strcat(mountdata, "unc="); - strcat(mountdata, *devname); - - /* find & copy prefixpath */ - tkn_e = strchr(ref->node_name + 2, '\\'); - if (tkn_e == NULL) { - /* invalid unc, missing share name*/ - rc = -EINVAL; - goto compose_mount_options_err; - } - - tkn_e = strchr(tkn_e + 1, '\\'); - if (tkn_e || (strlen(fullpath) - ref->path_consumed)) { - strncat(mountdata, &sep, 1); - strcat(mountdata, "prefixpath="); - if (tkn_e) - strcat(mountdata, tkn_e + 1); - strcat(mountdata, fullpath + ref->path_consumed); - } /*cifs_dbg(FYI, "%s: parent mountdata: %s\n", __func__, sb_mountdata);*/ /*cifs_dbg(FYI, "%s: submount mountdata: %s\n", __func__, mountdata );*/ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index e7512e4..7ede730 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -34,7 +34,7 @@ /** * dns_resolve_server_name_to_ip - Resolve UNC server name to ip address. - * @unc: UNC path specifying the server + * @unc: UNC path specifying the server (with '/' as delimiter) * @ip_addr: Where to return the IP address. * * The IP address will be returned in string form, and the caller is @@ -64,7 +64,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) hostname = unc + 2; /* Search for server name delimiter */ - sep = memchr(hostname, '\\', len); + sep = memchr(hostname, '/', len); if (sep) len = sep - hostname; else -- cgit v1.1 From 68a433f18c0574b50c5952978ca95b0db7347174 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:27:29 +0900 Subject: ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC This patch extends exynos_init_time() function to handle Exynos4210 rev0 SoC, which differs in availability of system timers and needs different clocksource initialization. This makes it possible to use exynos_init_time() function as init_time callback for all Exynos-based boards, including Universal_C210, which originally had to use samsung_timer_init(). Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 3 ++- arch/arm/mach-exynos/common.c | 30 +++++++++++++++++++++++++++++- arch/arm/mach-exynos/common.h | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 5 ++--- 4 files changed, 35 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff..ff18fc2 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304..a2d2012 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -442,8 +451,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +476,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35c..11fc1e2 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d..74ddb2b 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END -- cgit v1.1 From 1ba830c9997214a7fbe4d91cf238793764620e3b Mon Sep 17 00:00:00 2001 From: Jungseok Lee Date: Sat, 25 May 2013 06:33:03 +0900 Subject: ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC This patch fixes software reset logic. Software reset applies only to powered-on domains in SOC because software reset to all domains causes reboot failure. Signed-off-by: Jungseok Lee Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index a2d2012..027c9e7 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; -- cgit v1.1 From 15f504f0c2038b9a0f1569c9ce34def61f0c65be Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:49:43 +0900 Subject: ARM: SAMSUNG: Add names to fimd0 IRQ resources Since commit 1977e6d8 (drm/exynos: change the method for getting the interrupt) the Exynos DRM FIMD driver requires IRQ resources to be named. This patch fixes probe failure in non-DT cases by adding appropriate resource names to fimd0 platform device. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe2..0f9c3f4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { -- cgit v1.1 From 39d4ecdb711ba44e0aa0b2f3db74ed5ac97abe21 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 24 May 2013 11:38:24 +0100 Subject: ASoC: wm5110: Correct DSP4R Mixer control name Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c00480b..ba38f06 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -190,7 +190,7 @@ ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), +ARIZONA_MIXER_CONTROLS("DSP4R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE), -- cgit v1.1 From f6a12a7d0b1a70e969ae4f6d7c5201cdaf6edde0 Mon Sep 17 00:00:00 2001 From: "Meyer, Kirk" Date: Thu, 23 May 2013 17:06:57 +0000 Subject: microblaze: Reversed logic in futex cmpxchg futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer Signed-off-by: Michal Simek --- arch/microblaze/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ff8cde1..01848f0 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, __asm__ __volatile__ ("1: lwx %1, %3, r0; \ cmp %2, %1, %4; \ - beqi %2, 3f; \ + bnei %2, 3f; \ 2: swx %5, %3, r0; \ addic %2, r0, 0; \ bnei %2, 1b; \ -- cgit v1.1 From d9f998639f539613bb25cbbca380c81c892d586c Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 16 May 2013 21:33:18 -0700 Subject: pinctrl: samsung: fix suspend/resume functionality The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K but rewritten by Doug Anderson . Signed-off-by: Prathyush K Signed-off-by: Doug Anderson Tested-by: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 148 ++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.h | 5 ++ 2 files changed, 153 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 055d016..15db258 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -48,6 +49,9 @@ static struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +/* Global list of devices (struct samsung_pinctrl_drv_data) */ +LIST_HEAD(drvdata_list); + static unsigned int pin_base; static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) @@ -956,9 +960,145 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) ctrl->eint_wkup_init(drvdata); platform_set_drvdata(pdev, drvdata); + + /* Add to the global list */ + list_add_tail(&drvdata->node, &drvdata_list); + return 0; } +#ifdef CONFIG_PM + +/** + * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device + * + * Save data for all banks handled by this device. + */ +static void samsung_pinctrl_suspend_dev( + struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + bank->pm_save[type] = readl(reg + offs[type]); + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + bank->pm_save[PINCFG_TYPE_NUM] = + readl(reg + offs[PINCFG_TYPE_FUNC] + 4); + pr_debug("Save %s @ %p (con %#010x %08x)\n", + bank->name, reg, + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + } else { + pr_debug("Save %s @ %p (con %#010x)\n", bank->name, + reg, bank->pm_save[PINCFG_TYPE_FUNC]); + } + } +} + +/** + * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device + * + * Restore one of the banks that was saved during suspend. + * + * We don't bother doing anything complicated to avoid glitching lines since + * we're called before pad retention is turned off. + */ +static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n", + bank->name, reg, + readl(reg + offs[PINCFG_TYPE_FUNC]), + readl(reg + offs[PINCFG_TYPE_FUNC] + 4), + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + writel(bank->pm_save[PINCFG_TYPE_NUM], + reg + offs[PINCFG_TYPE_FUNC] + 4); + } else { + pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name, + reg, readl(reg + offs[PINCFG_TYPE_FUNC]), + bank->pm_save[PINCFG_TYPE_FUNC]); + } + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + writel(bank->pm_save[type], reg + offs[type]); + } +} + +/** + * samsung_pinctrl_suspend - save pinctrl state for suspend + * + * Save data for all banks across all devices. + */ +static int samsung_pinctrl_suspend(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry(drvdata, &drvdata_list, node) { + samsung_pinctrl_suspend_dev(drvdata); + } + + return 0; +} + +/** + * samsung_pinctrl_resume - restore pinctrl state for suspend + * + * Restore data for all banks across all devices. + */ +static void samsung_pinctrl_resume(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry_reverse(drvdata, &drvdata_list, node) { + samsung_pinctrl_resume_dev(drvdata); + } +} + +#else +#define samsung_pinctrl_suspend NULL +#define samsung_pinctrl_resume NULL +#endif + +static struct syscore_ops samsung_pinctrl_syscore_ops = { + .suspend = samsung_pinctrl_suspend, + .resume = samsung_pinctrl_resume, +}; + static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS { .compatible = "samsung,exynos4210-pinctrl", @@ -987,6 +1127,14 @@ static struct platform_driver samsung_pinctrl_driver = { static int __init samsung_pinctrl_drv_register(void) { + /* + * Register syscore ops for save/restore of registers across suspend. + * It's important to ensure that this driver is running at an earlier + * initcall level than any arch-specific init calls that install syscore + * ops that turn off pad retention (like exynos_pm_resume). + */ + register_syscore_ops(&samsung_pinctrl_syscore_ops); + return platform_driver_register(&samsung_pinctrl_driver); } postcore_initcall(samsung_pinctrl_drv_register); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9eb..9f5cc81 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -127,6 +127,7 @@ struct samsung_pin_bank_type { * @gpio_chip: GPIO chip of the bank. * @grange: linux gpio pin range supported by this bank. * @slock: spinlock protecting bank registers + * @pm_save: saved register values during suspend */ struct samsung_pin_bank { struct samsung_pin_bank_type *type; @@ -144,6 +145,8 @@ struct samsung_pin_bank { struct gpio_chip gpio_chip; struct pinctrl_gpio_range grange; spinlock_t slock; + + u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/ }; /** @@ -189,6 +192,7 @@ struct samsung_pin_ctrl { /** * struct samsung_pinctrl_drv_data: wrapper for holding driver data together. + * @node: global list node * @virt_base: register base address of the controller. * @dev: device instance representing the controller. * @irq: interrpt number used by the controller to notify gpio interrupts. @@ -201,6 +205,7 @@ struct samsung_pin_ctrl { * @nr_function: number of such pin functions. */ struct samsung_pinctrl_drv_data { + struct list_head node; void __iomem *virt_base; struct device *dev; int irq; -- cgit v1.1 From ad350cd9d5411353397843c8f410a6e7e84a71f9 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:27 +0200 Subject: pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index ac74281..4f868e5 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -326,6 +326,28 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) return 0; } +static u32 exynos_eint_wake_mask = 0xffffffff; + +u32 exynos_get_eint_wake_mask(void) +{ + return exynos_eint_wake_mask; +} + +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); + + pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); + + if (!on) + exynos_eint_wake_mask |= bit; + else + exynos_eint_wake_mask &= ~bit; + + return 0; +} + /* * irq_chip for wakeup interrupts */ @@ -335,6 +357,7 @@ static struct irq_chip exynos_wkup_irq_chip = { .irq_mask = exynos_wkup_irq_mask, .irq_ack = exynos_wkup_irq_ack, .irq_set_type = exynos_wkup_irq_set_type, + .irq_set_wake = exynos_wkup_irq_set_wake, }; /* interrupt handler for wakeup interrupts 0..15 */ -- cgit v1.1 From b134dc3feaa5136b376c7d2658bbe156bea19e63 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:28 +0200 Subject: ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- arch/arm/mach-exynos/include/mach/pm-core.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec..296090e 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include #include +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } -- cgit v1.1 From 97fc463769f1564e8eda2e2f70d3b6e92a25ff16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 13:58:37 +0800 Subject: pinctrl: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Acked-by: Tony Prisk Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-coh901.c | 3 ++- drivers/pinctrl/pinctrl-sunxi.c | 3 ++- drivers/pinctrl/vt8500/pinctrl-wmt.c | 3 +-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index a67af41..d6b4174 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -830,7 +830,8 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return 0; err_no_range: - err = gpiochip_remove(&gpio->chip); + if (gpiochip_remove(&gpio->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); err_no_chip: err_no_domain: err_no_port: diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c52fc2c..c058529 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -2000,7 +2000,8 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) return 0; gpiochip_error: - ret = gpiochip_remove(pctl->chip); + if (gpiochip_remove(pctl->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); pinctrl_error: pinctrl_unregister(pctl->pctl_dev); return ret; diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c index ab63104..70d986e 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -609,8 +609,7 @@ int wmt_pinctrl_probe(struct platform_device *pdev, return 0; fail_range: - err = gpiochip_remove(&data->gpio_chip); - if (err) + if (gpiochip_remove(&data->gpio_chip)) dev_err(&pdev->dev, "failed to remove gpio chip\n"); fail_gpio: pinctrl_unregister(data->pctl_dev); -- cgit v1.1 From 21c219933fd123d4cdfc8853f51c41330b9d6c28 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:30 +0200 Subject: pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 6 ++++++ drivers/pinctrl/pinctrl-samsung.h | 3 +++ 2 files changed, 9 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 15db258..63ac22e 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -1010,6 +1010,9 @@ static void samsung_pinctrl_suspend_dev( reg, bank->pm_save[PINCFG_TYPE_FUNC]); } } + + if (ctrl->suspend) + ctrl->suspend(drvdata); } /** @@ -1026,6 +1029,9 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) void __iomem *virt_base = drvdata->virt_base; int i; + if (ctrl->resume) + ctrl->resume(drvdata); + for (i = 0; i < ctrl->nr_banks; i++) { struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; void __iomem *reg = virt_base + bank->pctl_offset; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 9f5cc81..b316d9f 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -187,6 +187,9 @@ struct samsung_pin_ctrl { int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *); int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *); + void (*suspend)(struct samsung_pinctrl_drv_data *); + void (*resume)(struct samsung_pinctrl_drv_data *); + char *label; }; -- cgit v1.1 From 3385474c3a2f5e81df67cba426c29beefd8a5c18 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:31 +0200 Subject: pinctrl: samsung: Allow per-bank SoC-specific private data This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b316d9f..26d3519 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -139,6 +139,7 @@ struct samsung_pin_bank { u32 eint_mask; u32 eint_offset; char *name; + void *soc_priv; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; -- cgit v1.1 From 7ccbc60cd9c293304829662b043f4356f554fc3a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 22 May 2013 16:03:17 +0200 Subject: pinctrl: exynos: Handle suspend/resume of GPIO EINT registers Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 116 ++++++++++++++++++++++++++++++++++++++- drivers/pinctrl/pinctrl-exynos.h | 1 + 2 files changed, 114 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4f868e5..2d76f66 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; } +struct exynos_eint_gpio_save { + u32 eint_con; + u32 eint_fltcon0; + u32 eint_fltcon1; +}; + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { struct samsung_pin_bank *bank; struct device *dev = d->dev; - unsigned int ret; - unsigned int i; + int ret; + int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) bank->nr_pins, &exynos_gpio_irqd_ops, bank); if (!bank->irq_domain) { dev_err(dev, "gpio irq domain add failed\n"); - return -ENXIO; + ret = -ENXIO; + goto err_domains; + } + + bank->soc_priv = devm_kzalloc(d->dev, + sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); + if (!bank->soc_priv) { + irq_domain_remove(bank->irq_domain); + ret = -ENOMEM; + goto err_domains; } } return 0; + +err_domains: + for (--i, --bank; i >= 0; --i, --bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + irq_domain_remove(bank->irq_domain); + } + + return ret; } static void exynos_wkup_irq_unmask(struct irq_data *irqd) @@ -528,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) return 0; } +static void exynos_pinctrl_suspend_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); + + pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); + pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); +} + +static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_suspend_bank(drvdata, bank); +} + +static void exynos_pinctrl_resume_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset), save->eint_fltcon0); + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4), save->eint_fltcon1); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); +} + +static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_resume_bank(drvdata, bank); +} + /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -591,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -605,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -686,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -700,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -710,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -720,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl3", }, }; @@ -798,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -808,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -818,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -828,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl3", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a..3c91c35 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -19,6 +19,7 @@ /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 #define EXYNOS_GPIO_EPEND_OFFSET 0xA00 #define EXYNOS_WKUP_ECON_OFFSET 0xE00 -- cgit v1.1 From d72f88a42bf9761e3a92e58879d25a65712ca87a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 23 May 2013 17:32:14 +0800 Subject: pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-sunxi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c058529..b7d8c89 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -1990,8 +1990,10 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) } clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto gpiochip_error; + } clk_prepare_enable(clk); -- cgit v1.1 From a386267a2ceea33d76fa2b7f1c2e72a858fcb68e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 May 2013 15:53:32 +0200 Subject: pinctrl: pinconf: take the right mutex The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan Cc: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index c67c37e..694c3ac 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -610,7 +610,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) bool found = false; unsigned long config; - mutex_lock(&pctldev->mutex); + mutex_lock(&pinctrl_maps_mutex); /* Parse the pinctrl map and look for the elected pin/state */ for_each_maps(maps_node, i, map) { @@ -659,7 +659,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) confops->pin_config_config_dbg_show(pctldev, s, config); exit: - mutex_unlock(&pctldev->mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } -- cgit v1.1 From de614e561b9c633073caae8f86399aa8923ef85d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 21 May 2013 17:09:41 +0300 Subject: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath Signed-off-by: Jussi Kivilinna Tested-by: Julian Wollrath Acked-by: Tim Chen Signed-off-by: Herbert Xu --- arch/x86/crypto/sha256-avx-asm.S | 2 +- arch/x86/crypto/sha256-ssse3-asm.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S index 56610c4..642f156 100644 --- a/arch/x86/crypto/sha256-avx-asm.S +++ b/arch/x86/crypto/sha256-avx-asm.S @@ -118,7 +118,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S index 98d3c39..f833b74 100644 --- a/arch/x86/crypto/sha256-ssse3-asm.S +++ b/arch/x86/crypto/sha256-ssse3-asm.S @@ -111,7 +111,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 -- cgit v1.1 From c89b65e7fffef745bdd36c372aa0dea778fecbab Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Mon, 27 May 2013 15:58:04 +0200 Subject: qxl: fix Kconfig deps - select FB_DEFERRED_IO Signed-off-by: Andrew Jones Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index 2f1a57e..d6c1279 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -4,6 +4,7 @@ config DRM_QXL select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO select DRM_KMS_HELPER select DRM_TTM help -- cgit v1.1 From 37c14e83ee173cc3f6310d80f00f2e588c402b61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 May 2013 10:22:06 +0200 Subject: m68k: Update defconfigs for v3.9 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 230 ++++++++++++++++++++++-------- arch/m68k/configs/apollo_defconfig | 215 ++++++++++++++++++++-------- arch/m68k/configs/atari_defconfig | 227 ++++++++++++++++++++++-------- arch/m68k/configs/bvme6000_defconfig | 217 ++++++++++++++++++++-------- arch/m68k/configs/hp300_defconfig | 214 +++++++++++++++++++++------- arch/m68k/configs/mac_defconfig | 234 +++++++++++++++++++++++-------- arch/m68k/configs/multi_defconfig | 264 ++++++++++++++++++++++++----------- arch/m68k/configs/mvme147_defconfig | 215 ++++++++++++++++++++-------- arch/m68k/configs/mvme16x_defconfig | 216 ++++++++++++++++++++-------- arch/m68k/configs/q40_defconfig | 229 ++++++++++++++++++++++-------- arch/m68k/configs/sun3_defconfig | 209 ++++++++++++++++++++------- arch/m68k/configs/sun3x_defconfig | 210 +++++++++++++++++++++------- 12 files changed, 1982 insertions(+), 698 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 90d3109..19325e1 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,55 +1,78 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-amiga" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_AMIGA=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +CONFIG_AMIGA=y CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +80,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +121,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +136,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +170,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,18 +178,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -154,11 +211,13 @@ CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -172,57 +231,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_ARIADNE=y +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y +CONFIG_ARIADNE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_HYDRA=y -CONFIG_ZORRO8390=y CONFIG_APNE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set @@ -233,11 +312,14 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -252,48 +334,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -332,10 +430,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -345,19 +456,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -373,6 +481,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 8f4f657..14dc6cc 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,55 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-apollo" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_APOLLO=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_APOLLO=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -162,57 +218,74 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -221,47 +294,61 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +387,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +413,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +438,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 4571d33..6d5370c 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,53 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-atari" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ATARI=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_ATARI=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,18 +175,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_ATARI=m @@ -150,11 +206,13 @@ CONFIG_PARPORT_1284=y CONFIG_ATARI_FLOPPY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_RAID_ATTRS=m @@ -167,63 +225,81 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_ATARI_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m CONFIG_ATARILANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_ATARI=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATARI=y @@ -233,47 +309,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y -# CONFIG_USB_SUPPORT is not set +CONFIG_UHID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -312,10 +405,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -325,19 +431,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -353,6 +456,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 12f2117..c015ddb 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-bvme6000" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_BVME6000=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_BVME6000=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_BVME6000_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_BVME6000_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,7 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y -CONFIG_CRC32=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 215389a..ec7382d 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,54 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-hp300" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_HP300=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_HP300=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -56,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -85,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -98,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -123,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -132,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -161,59 +218,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_HPLANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_HP_SDC_RTC=m -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=m CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,47 +297,60 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -301,10 +389,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -314,19 +415,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -342,6 +440,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index cb9dfb3..7d46fbe 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,49 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mac" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MAC=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,31 +175,45 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_RAID_ATTRS=m @@ -164,29 +226,30 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -194,46 +257,61 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m CONFIG_MACMACE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_MAC8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_VALKYRIE=y @@ -242,46 +320,60 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y +CONFIG_NFS_FS=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -320,10 +412,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -333,19 +438,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -361,6 +463,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 8d5def4..0f795d8 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,15 +1,29 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-multi" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68020=y +CONFIG_M68040=y +CONFIG_M68060=y +CONFIG_M68KFPU_EMU=y CONFIG_AMIGA=y CONFIG_ATARI=y CONFIG_MAC=y @@ -21,48 +35,50 @@ CONFIG_BVME6000=y CONFIG_HP300=y CONFIG_SUN3X=y CONFIG_Q40=y -CONFIG_M68020=y -CONFIG_M68040=y -CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -70,25 +86,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -99,6 +127,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -112,22 +142,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -137,7 +176,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -146,22 +184,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -170,15 +220,17 @@ CONFIG_PARPORT_ATARI=m CONFIG_PARPORT_1284=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -195,11 +247,9 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y @@ -213,21 +263,24 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -235,49 +288,64 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y -CONFIG_HYDRA=y -CONFIG_ZORRO8390=y -CONFIG_APNE=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=y -CONFIG_MACSONIC=y -CONFIG_MACMACE=y -CONFIG_MVME147_NET=y -CONFIG_MVME16x_NET=y -CONFIG_BVME6000_NET=y +CONFIG_ARIADNE=y CONFIG_ATARILANCE=y -CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y +CONFIG_MVME147_NET=y +CONFIG_SUN3LANCE=y +CONFIG_MACMACE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_BVME6000_NET=y +CONFIG_MVME16x_NET=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_HYDRA=y +CONFIG_MAC8390=y CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_APNE=y +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m @@ -285,18 +353,20 @@ CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_HP_SDC_RTC=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_HP_SDC_RTC=m CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -316,7 +386,20 @@ CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y @@ -324,42 +407,49 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -398,10 +488,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -411,19 +514,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -439,6 +539,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e2af46f..5586c65 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,52 +1,73 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme147" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68030=y CONFIG_VME=y CONFIG_MVME147=y -CONFIG_M68030=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -54,25 +75,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -83,6 +116,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -96,22 +131,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -121,7 +165,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -130,21 +173,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -159,103 +215,132 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME147_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MVME147_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -294,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -307,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -335,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 7c9402b..e5e8262 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme16x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_MVME16x=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_MVME16x=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME16x_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MVME16x_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 19d23db6..8982370 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,49 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-q40" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_Q40=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_Q40=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,26 +174,40 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_Q40IDE=y CONFIG_RAID_ATTRS=m @@ -159,61 +220,82 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,46 +304,61 @@ CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +397,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +423,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +448,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index ca6c0b4..54674d6 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,107 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y +# CONFIG_NET_CADENCE is not set CONFIG_SUN3_82586=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -296,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -309,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -337,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index c80941c..832d953 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3X=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,106 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m -- cgit v1.1 From 1d7004f0593f631b78745e4c835d8e09b31f4996 Mon Sep 17 00:00:00 2001 From: Frederico Cadete Date: Sat, 25 May 2013 22:48:57 +0200 Subject: xmem/tmem: fix 'undefined variable' build error. In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 18e8bd8..cc072c6 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -41,6 +41,8 @@ module_param(selfballooning, bool, S_IRUGO); #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; module_param(frontswap, bool, S_IRUGO); +#else /* CONFIG_FRONTSWAP */ +#define frontswap (0) #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -- cgit v1.1 From d3134e211e8db7fa833c40b5879fc022693e16c2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:41:57 +0530 Subject: ASoC: wm8994: use the correct pointer to get the control value Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1eb152c..62dc305 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1031,7 +1031,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = codec->control_data; + struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; int i; int dac; -- cgit v1.1 From 9767a58b8b2a0b153c246fb6306c7d48d51bb379 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 May 2013 12:52:08 +0100 Subject: ASoC: wm8994: Fix reporting of accessory removal on WM8958 During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 62dc305..b38382c 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3833,6 +3833,11 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_dbg(codec->dev, "Ignoring removed jack\n"); return IRQ_HANDLED; } + } else if (!(reg & WM8958_MICD_STS)) { + snd_soc_jack_report(wm8994->micdet[0].jack, 0, + SND_JACK_MECHANICAL | SND_JACK_HEADSET | + wm8994->btn_mask); + goto out; } if (wm8994->mic_detecting) -- cgit v1.1 From 7d6898be8db92450ce7a0afcc4238680b9703e2b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:06:42 +0530 Subject: ASoC: wm8994: check for array index returned The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index b38382c..dfd997a 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -383,6 +383,8 @@ static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int drc = wm8994_get_drc(kcontrol->id.name); + if (drc < 0) + return drc; ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc]; return 0; @@ -488,6 +490,9 @@ static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int block = wm8994_get_retune_mobile_block(kcontrol->id.name); + if (block < 0) + return block; + ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block]; return 0; -- cgit v1.1 From 04d245b7899c020559402841d2f70ddd740a7704 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 23 May 2013 16:53:02 +0200 Subject: ASoC: cs42l52: fix default value for MASTERA_VOL. The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 8465c1fa..030f53c 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -86,7 +86,7 @@ static const struct reg_default cs42l52_reg_defaults[] = { { CS42L52_BEEP_VOL, 0x00 }, /* r1D Beep Volume off Time */ { CS42L52_BEEP_TONE_CTL, 0x00 }, /* r1E Beep Tone Cfg. */ { CS42L52_TONE_CTL, 0x00 }, /* r1F Tone Ctl */ - { CS42L52_MASTERA_VOL, 0x88 }, /* r20 Master A Volume */ + { CS42L52_MASTERA_VOL, 0x00 }, /* r20 Master A Volume */ { CS42L52_MASTERB_VOL, 0x00 }, /* r21 Master B Volume */ { CS42L52_HPA_VOL, 0x00 }, /* r22 Headphone A Volume */ { CS42L52_HPB_VOL, 0x00 }, /* r23 Headphone B Volume */ -- cgit v1.1 From 6721cb60022629ae76365551f05d9658b8d14c55 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 14:21:36 -0400 Subject: ring-buffer: Do not poll non allocated cpu buffers The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b59aea2..e444ff8 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -620,6 +620,9 @@ int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, if (cpu == RING_BUFFER_ALL_CPUS) work = &buffer->irq_work; else { + if (!cpumask_test_cpu(cpu, buffer->cpumask)) + return -EINVAL; + cpu_buffer = buffer->buffers[cpu]; work = &cpu_buffer->irq_work; } -- cgit v1.1 From b161c144404c18f6a9e20e46b63828ae3c2eb093 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 09:47:49 -0400 Subject: svcrpc: implement O_NONBLOCK behavior for use-gss-proxy Somebody noticed LTP was complaining about O_NONBLOCK opens of /proc/net/rpc/use-gss-proxy succeeding and then a following read hanging. I'm not convinced LTP really has any business opening random proc files and expecting them to behave a certain way. Maybe this isn't really a bug. But in any case the O_NONBLOCK behavior could be useful for someone that wants to test whether gss-proxy is up without waiting. Reported-by: Jan Stancek Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 2c6a1ec..29b4ba9 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1317,10 +1317,12 @@ static inline bool gssp_ready(struct sunrpc_net *sn) return false; } -static int wait_for_gss_proxy(struct net *net) +static int wait_for_gss_proxy(struct net *net, struct file *file) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + if (file->f_flags & O_NONBLOCK && !gssp_ready(sn)) + return -EAGAIN; return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn)); } @@ -1362,7 +1364,7 @@ static ssize_t read_gssp(struct file *file, char __user *buf, size_t len; int ret; - ret = wait_for_gss_proxy(net); + ret = wait_for_gss_proxy(net, file); if (ret) return ret; -- cgit v1.1 From e9d0626ed43a41a3fc526d1df06122b0d4eac174 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Tue, 14 May 2013 14:48:58 +0800 Subject: x86-64, init: Fix a possible wraparound bug in switchover in head_64.S In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by: Zhang Yanfei Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com Signed-off-by: Yinghai Lu Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/head_64.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 08f7e80..321d65e 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -115,8 +115,10 @@ startup_64: movq %rdi, %rax shrq $PUD_SHIFT, %rax andl $(PTRS_PER_PUD-1), %eax - movq %rdx, (4096+0)(%rbx,%rax,8) - movq %rdx, (4096+8)(%rbx,%rax,8) + movq %rdx, 4096(%rbx,%rax,8) + incl %eax + andl $(PTRS_PER_PUD-1), %eax + movq %rdx, 4096(%rbx,%rax,8) addq $8192, %rbx movq %rdi, %rax -- cgit v1.1 From da9d0fbf5e9aa47492a19588bd0efd18d6d172e0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 9 May 2013 13:58:19 -0700 Subject: ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson Reviewed-by: Doug Anderson Tested-by: Tushar Behera Acked-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 54 +++++++++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d..227abf9 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y -- cgit v1.1 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_probe_frontend.c | 37 +++++++++++++++++++++++++++++- include/xen/xenbus.h | 1 + 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index 3159a37..a7e2507 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -29,6 +29,8 @@ #include "xenbus_probe.h" +static struct workqueue_struct *xenbus_frontend_wq; + /* device// => - */ static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) { @@ -89,9 +91,40 @@ static void backend_changed(struct xenbus_watch *watch, xenbus_otherend_changed(watch, vec, len, 1); } +static void xenbus_frontend_delayed_resume(struct work_struct *w) +{ + struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); + + xenbus_dev_resume(&xdev->dev); +} + +static int xenbus_frontend_dev_resume(struct device *dev) +{ + /* + * If xenstored is running in this domain, we cannot access the backend + * state at the moment, so we need to defer xenbus_dev_resume + */ + if (xen_store_domain_type == XS_LOCAL) { + struct xenbus_device *xdev = to_xenbus_device(dev); + + if (!xenbus_frontend_wq) { + pr_err("%s: no workqueue to process delayed resume\n", + xdev->nodename); + return -EFAULT; + } + + INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); + queue_work(xenbus_frontend_wq, &xdev->work); + + return 0; + } + + return xenbus_dev_resume(dev); +} + static const struct dev_pm_ops xenbus_pm_ops = { .suspend = xenbus_dev_suspend, - .resume = xenbus_dev_resume, + .resume = xenbus_frontend_dev_resume, .freeze = xenbus_dev_suspend, .thaw = xenbus_dev_cancel, .restore = xenbus_dev_resume, @@ -440,6 +473,8 @@ static int __init xenbus_probe_frontend_init(void) register_xenstore_notifier(&xenstore_notifier); + xenbus_frontend_wq = create_workqueue("xenbus_frontend"); + return 0; } subsys_initcall(xenbus_probe_frontend_init); diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c..569c07f 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v1.1 From 33c1174bae3ea8f420abce53cf8aded778987583 Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:55 +0100 Subject: xenbus: save xenstore local status for later use Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_comms.h | 1 + drivers/xen/xenbus/xenbus_probe.c | 27 ++++++++++++--------------- drivers/xen/xenbus/xenbus_probe.h | 7 +++++++ 3 files changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_comms.h b/drivers/xen/xenbus/xenbus_comms.h index c8abd3b..e74f9c1 100644 --- a/drivers/xen/xenbus/xenbus_comms.h +++ b/drivers/xen/xenbus/xenbus_comms.h @@ -45,6 +45,7 @@ int xb_wait_for_data_to_read(void); int xs_input_avail(void); extern struct xenstore_domain_interface *xen_store_interface; extern int xen_store_evtchn; +extern enum xenstore_init xen_store_domain_type; extern const struct file_operations xen_xenbus_fops; diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 3325884..56cfaaa 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -69,6 +69,9 @@ EXPORT_SYMBOL_GPL(xen_store_evtchn); struct xenstore_domain_interface *xen_store_interface; EXPORT_SYMBOL_GPL(xen_store_interface); +enum xenstore_init xen_store_domain_type; +EXPORT_SYMBOL_GPL(xen_store_domain_type); + static unsigned long xen_store_mfn; static BLOCKING_NOTIFIER_HEAD(xenstore_chain); @@ -719,17 +722,11 @@ static int __init xenstored_local_init(void) return err; } -enum xenstore_init { - UNKNOWN, - PV, - HVM, - LOCAL, -}; static int __init xenbus_init(void) { int err = 0; - enum xenstore_init usage = UNKNOWN; uint64_t v = 0; + xen_store_domain_type = XS_UNKNOWN; if (!xen_domain()) return -ENODEV; @@ -737,29 +734,29 @@ static int __init xenbus_init(void) xenbus_ring_ops_init(); if (xen_pv_domain()) - usage = PV; + xen_store_domain_type = XS_PV; if (xen_hvm_domain()) - usage = HVM; + xen_store_domain_type = XS_HVM; if (xen_hvm_domain() && xen_initial_domain()) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && !xen_start_info->store_evtchn) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && xen_start_info->store_evtchn) xenstored_ready = 1; - switch (usage) { - case LOCAL: + switch (xen_store_domain_type) { + case XS_LOCAL: err = xenstored_local_init(); if (err) goto out_error; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case PV: + case XS_PV: xen_store_evtchn = xen_start_info->store_evtchn; xen_store_mfn = xen_start_info->store_mfn; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case HVM: + case XS_HVM: err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); if (err) goto out_error; diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h index bb4f92e..146f857 100644 --- a/drivers/xen/xenbus/xenbus_probe.h +++ b/drivers/xen/xenbus/xenbus_probe.h @@ -47,6 +47,13 @@ struct xen_bus_type { struct bus_type bus; }; +enum xenstore_init { + XS_UNKNOWN, + XS_PV, + XS_HVM, + XS_LOCAL, +}; + extern struct device_attribute xenbus_dev_attrs[]; extern int xenbus_match(struct device *_dev, struct device_driver *_drv); -- cgit v1.1 From 1db01b4903639fcfaec213701a494fe3fb2c490b Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Wed, 8 May 2013 16:37:35 +0200 Subject: xen: Clean up apic ipi interface Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the implementation of the PV apic ipi interface. But there were some odd things (it seems none of which cause really any issue but maybe they should be cleaned up anyway): - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself) ignore the passed in vector and only use the CALL_FUNCTION_SINGLE vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector. - physflat_send_IPI_allbutself is declared unnecessarily. It is never used. This patch tries to clean up those things. Signed-off-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 10 ++++------ arch/x86/xen/smp.h | 1 - 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 8ff3799..fb44426 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -576,24 +576,22 @@ void xen_send_IPI_mask_allbutself(const struct cpumask *mask, { unsigned cpu; unsigned int this_cpu = smp_processor_id(); + int xen_vector = xen_map_vector(vector); - if (!(num_online_cpus() > 1)) + if (!(num_online_cpus() > 1) || (xen_vector < 0)) return; for_each_cpu_and(cpu, mask, cpu_online_mask) { if (this_cpu == cpu) continue; - xen_smp_send_call_function_single_ipi(cpu); + xen_send_IPI_one(cpu, xen_vector); } } void xen_send_IPI_allbutself(int vector) { - int xen_vector = xen_map_vector(vector); - - if (xen_vector >= 0) - xen_send_IPI_mask_allbutself(cpu_online_mask, xen_vector); + xen_send_IPI_mask_allbutself(cpu_online_mask, vector); } static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id) diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h index 8981a76..c7c2d89 100644 --- a/arch/x86/xen/smp.h +++ b/arch/x86/xen/smp.h @@ -5,7 +5,6 @@ extern void xen_send_IPI_mask(const struct cpumask *mask, extern void xen_send_IPI_mask_allbutself(const struct cpumask *mask, int vector); extern void xen_send_IPI_allbutself(int vector); -extern void physflat_send_IPI_allbutself(int vector); extern void xen_send_IPI_all(int vector); extern void xen_send_IPI_self(int vector); -- cgit v1.1 From d69c0e3975e4955dd596c162d1628ba1dbb1eb45 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:31:15 +0100 Subject: xen-pciback: more uses of cached MSI-X capability offset Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-pciback/pci_stub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index a2278ba..4e8ba38 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -106,7 +106,7 @@ static void pcistub_device_release(struct kref *kref) else pci_restore_state(dev); - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, @@ -371,7 +371,7 @@ static int pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, -- cgit v1.1 From afe3c3fd5392b2f0066930abc5dbd3f4b14a0f13 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 17:24:34 -0400 Subject: svcrpc: fix failures to handle -1 uid's and gid's As of f025adf191924e3a75ce80e130afcd2485b53bb8 "sunrpc: Properly decode kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1 (0xffff) uid or gid would fail with a badcred error. Reported symptoms were xmbc clients failing on upgrade of the NFS server; examination of the network trace showed them sending -1 as the gid. Reported-by: Julian Sikorski Tested-by: Julian Sikorski Cc: "Eric W. Biederman" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svcauth_unix.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c index c3f9e1e..06bdf5a 100644 --- a/net/sunrpc/svcauth_unix.c +++ b/net/sunrpc/svcauth_unix.c @@ -810,11 +810,15 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) goto badcred; argv->iov_base = (void*)((__be32*)argv->iov_base + slen); /* skip machname */ argv->iov_len -= slen*4; - + /* + * Note: we skip uid_valid()/gid_valid() checks here for + * backwards compatibility with clients that use -1 id's. + * Instead, -1 uid or gid is later mapped to the + * (export-specific) anonymous id by nfsd_setuser. + * Supplementary gid's will be left alone. + */ cred->cr_uid = make_kuid(&init_user_ns, svc_getnl(argv)); /* uid */ cred->cr_gid = make_kgid(&init_user_ns, svc_getnl(argv)); /* gid */ - if (!uid_valid(cred->cr_uid) || !gid_valid(cred->cr_gid)) - goto badcred; slen = svc_getnl(argv); /* gids length */ if (slen > 16 || (len -= (slen + 2)*4) < 0) goto badcred; @@ -823,8 +827,6 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) return SVC_CLOSE; for (i = 0; i < slen; i++) { kgid_t kgid = make_kgid(&init_user_ns, svc_getnl(argv)); - if (!gid_valid(kgid)) - goto badcred; GROUP_AT(cred->cr_group_info, i) = kgid; } if (svc_getu32(argv) != htonl(RPC_AUTH_NULL) || svc_getu32(argv) != 0) { -- cgit v1.1 From 27b0705c68dab67a6c8ffa19869aeca3eaf75d78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 21 May 2013 17:14:18 +0200 Subject: drm/radeon: UVD block on SUMO2 is the same as on SUMO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/rv770.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 83f612a..3fc2985 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -862,10 +862,8 @@ int rv770_uvd_resume(struct radeon_device *rdev) chip_id = 0x0100000b; break; case CHIP_SUMO: - chip_id = 0x0100000c; - break; case CHIP_SUMO2: - chip_id = 0x0100000d; + chip_id = 0x0100000c; break; case CHIP_PALM: chip_id = 0x0100000e; -- cgit v1.1 From 468ef1a58c9268ac9709350bf95eaf1c22a69f29 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 May 2013 13:35:19 -0400 Subject: drm/radeon: fix typo in cu_per_sh on verde Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 5ffade6..d1ba9d8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2616,7 +2616,7 @@ static void si_gpu_init(struct radeon_device *rdev) default: rdev->config.si.max_shader_engines = 1; rdev->config.si.max_tile_pipes = 4; - rdev->config.si.max_cu_per_sh = 2; + rdev->config.si.max_cu_per_sh = 5; rdev->config.si.max_sh_per_se = 2; rdev->config.si.max_backends_per_se = 4; rdev->config.si.max_texture_channel_caches = 4; -- cgit v1.1 From 09fb8bd1a63b0f9f15e655c4fe8d047e5d2bf67a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:22:51 -0400 Subject: drm/radeon: fix card_posted check for newer asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c2c59fb..89cc816 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -472,18 +472,17 @@ bool radeon_card_posted(struct radeon_device *rdev) return false; /* first check CRTCs */ - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (reg & EVERGREEN_CRTC_MASTER_EN) - return true; - } else if (ASIC_IS_DCE4(rdev)) { - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (reg & EVERGREEN_CRTC_MASTER_EN) return true; } else if (ASIC_IS_AVIVO(rdev)) { -- cgit v1.1 From 2cf3a4fcc64e5b54a8a3cd793c6c0024b5d8da6c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:30:34 -0400 Subject: drm/radeon: don't check crtcs in card_posted() on cards without DCE Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 89cc816..af82c9b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -471,6 +471,9 @@ bool radeon_card_posted(struct radeon_device *rdev) rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) return false; + if (ASIC_IS_NODCE(rdev)) + goto check_memsize; + /* first check CRTCs */ if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | @@ -499,6 +502,7 @@ bool radeon_card_posted(struct radeon_device *rdev) } } +check_memsize: /* then check MEM_SIZE, in case the crtcs are off */ if (rdev->family >= CHIP_R600) reg = RREG32(R600_CONFIG_MEMSIZE); -- cgit v1.1 From 50a583f64bfe53aae4996965c1d1b25d90ce4f64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 13:29:33 -0400 Subject: drm/radeon: narrow scope of Apple re-POST hack This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett Signed-off-by: Alex Deucher Acked-by: Matthew Garrett --- drivers/gpu/drm/radeon/radeon_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index af82c9b..1899738 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -467,8 +467,10 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; + /* required for EFI mode on macbook2,1 which uses an r5xx asic */ if (efi_enabled(EFI_BOOT) && - rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) + (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && + (rdev->family < CHIP_R600)) return false; if (ASIC_IS_NODCE(rdev)) -- cgit v1.1 From 7e0e41963740525af702bb23edede8ae9afc4ac0 Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 3 May 2013 19:43:13 -0300 Subject: radeon: use max_bus_speed to activate gen2 speeds radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 10 +++------- drivers/gpu/drm/radeon/r600.c | 9 ++------- drivers/gpu/drm/radeon/rv770.c | 9 ++------- 3 files changed, 7 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8f9e2d3..8546e3b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4999,8 +4999,7 @@ void evergreen_fini(struct radeon_device *rdev) void evergreen_pcie_gen2_enable(struct radeon_device *rdev) { - u32 link_width_cntl, speed_cntl, mask; - int ret; + u32 link_width_cntl, speed_cntl; if (radeon_pcie_gen2 == 0) return; @@ -5015,11 +5014,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1a08008..b45e648 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -4631,8 +4631,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -4651,11 +4649,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (rdev->family <= CHIP_R600) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3fc2985..08aef24 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -2111,8 +2111,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -2127,11 +2125,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); -- cgit v1.1 From dd4704480372fdbf3e8f7826274a883c4c7c335a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:03 +0100 Subject: clk: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson Signed-off-by: Lee Jones Signed-off-by: Mike Turquette [mturquette@linaro.org: improved changelog] --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0b4f35a..80069c3 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -325,7 +325,7 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, BIT(0), 0); clk_register_clkdev(clk, "fsmc", NULL); - clk_register_clkdev(clk, NULL, "smsc911x"); + clk_register_clkdev(clk, NULL, "smsc911x.0"); clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, BIT(1), 0); -- cgit v1.1 From f586938ba2cf83ed4cbebe96436220d182a7808e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 30 Apr 2013 14:45:06 +0200 Subject: clk: ux500: clk-sysctrl: handle clocks with no parents Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri Acked-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/clk-sysctrl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c index bc7e9bd..e364c9d 100644 --- a/drivers/clk/ux500/clk-sysctrl.c +++ b/drivers/clk/ux500/clk-sysctrl.c @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev, return ERR_PTR(-ENOMEM); } - for (i = 0; i < num_parents; i++) { + /* set main clock registers */ + clk->reg_sel[0] = reg_sel[0]; + clk->reg_bits[0] = reg_bits[0]; + clk->reg_mask[0] = reg_mask[0]; + + /* handle clocks with more than one parent */ + for (i = 1; i < num_parents; i++) { clk->reg_sel[i] = reg_sel[i]; clk->reg_bits[i] = reg_bits[i]; clk->reg_mask[i] = reg_mask[i]; -- cgit v1.1 From 056f3d58db6f7d19be7dbc2aab8d049f28e20d6e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 18:38:09 +0200 Subject: clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks Currently no driver *) handles the sysreg clock, with an assumption that this clock is always left in its default state (enabled). Before commit 6e6aac7590f902d14d90bace3fd499 ARM: EXYNOS: Migrate clock support to common clock framework the sysreg clock was not even defined and hence wasn't handled explicitly in the kernel. To restore the previous behaviour disable masking the sysreg clock off in the clock core by default. *) Except the Exynos4x12 FIMC-IS driver, which will be modified to not touch the sysreg clock. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index d0940e6..3c1f888 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -791,7 +791,8 @@ struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0), GATE(smmu_rotator, "smmu_rotator", "aclk200", E4210_GATE_IP_IMAGE, 4, 0, 0), @@ -819,7 +820,8 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0), GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0", SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0), -- cgit v1.1 From 8d0b8801c9e4c2c6b20cdac74dbab16facce7653 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 29 May 2013 17:02:58 +0100 Subject: xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_client.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 61786be..ec097d6 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -534,7 +534,7 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, err = xenbus_map_ring(dev, gnt_ref, &node->handle, addr); if (err) - goto out_err; + goto out_err_free_ballooned_pages; spin_lock(&xenbus_valloc_lock); list_add(&node->next, &xenbus_valloc_pages); @@ -543,8 +543,9 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, *vaddr = addr; return 0; - out_err: + out_err_free_ballooned_pages: free_xenballooned_pages(1, &node->page); + out_err: kfree(node); return err; } -- cgit v1.1 From f448badd34700ae728a32ba024249626d49c10e1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 29 May 2013 15:36:40 -0400 Subject: NFSv4: Fix a thinko in nfs4_try_open_cached We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4e2fe71..d7ba561 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1078,7 +1078,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) struct nfs4_state *state = opendata->state; struct nfs_inode *nfsi = NFS_I(state->inode); struct nfs_delegation *delegation; - int open_mode = opendata->o_arg.open_flags & (O_EXCL|O_TRUNC); + int open_mode = opendata->o_arg.open_flags; fmode_t fmode = opendata->o_arg.fmode; nfs4_stateid stateid; int ret = -EAGAIN; -- cgit v1.1 From 67e1e2268e598861dc771e3c976daf07db380638 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:22 +0200 Subject: clk: si5351: Fix clkout rate computation. Rate was incorrectly computed because we read from wrong divider register. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette Cc: stable@kernel.org --- drivers/clk/clk-si5351.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 8927284..cf39e53 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -932,7 +932,7 @@ static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, unsigned char reg; unsigned char rdiv; - if (hwdata->num > 5) + if (hwdata->num <= 5) reg = si5351_msynth_params_address(hwdata->num) + 2; else reg = SI5351_CLK6_7_OUTPUT_DIVIDER; -- cgit v1.1 From 6532cb71fb31436b8d31818a056f45b8f95dfb31 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:23 +0200 Subject: clk: si5351: Set initial clkout rate when defined in platform data. clock-frequency property from platform data was read but never used. Apply defined rate when clock is registered. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette [mturquette@linaro.org: add missing changelog] Cc: stable@kernel.org Signed-off-by: Mike Turquette --- drivers/clk/clk-si5351.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index cf39e53..24f5536 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1477,6 +1477,16 @@ static int si5351_i2c_probe(struct i2c_client *client, return -EINVAL; } drvdata->onecell.clks[n] = clk; + + /* set initial clkout rate */ + if (pdata->clkout[n].rate != 0) { + int ret; + ret = clk_set_rate(clk, pdata->clkout[n].rate); + if (ret != 0) { + dev_err(&client->dev, "Cannot set rate : %d\n", + ret); + } + } } ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, -- cgit v1.1 From 419e321df8d7d605f21f980903befc65ee66e848 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 18 May 2013 09:18:49 +1200 Subject: clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() With the addition of a DVO clock, a bug is now evident in the vt8500 clock code: [ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c() [ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int This is caused by an unbalanced spinlock in vt8500_dclk_set_rate(). Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore(). Signed-off-by: Tony Prisk Signed-off-by: Mike Turquette --- drivers/clk/clk-vt8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index debf688..553ac35 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -183,7 +183,7 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, writel(divisor, cdev->div_reg); vt8500_pmc_wait_busy(); - spin_lock_irqsave(cdev->lock, flags); + spin_unlock_irqrestore(cdev->lock, flags); return 0; } -- cgit v1.1 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 18 ++++++++++++++---- include/target/target_core_base.h | 1 + 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 311c113..bbca144 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -221,6 +221,7 @@ struct se_session *transport_init_session(void) INIT_LIST_HEAD(&se_sess->sess_list); INIT_LIST_HEAD(&se_sess->sess_acl_list); INIT_LIST_HEAD(&se_sess->sess_cmd_list); + INIT_LIST_HEAD(&se_sess->sess_wait_list); spin_lock_init(&se_sess->sess_cmd_lock); kref_init(&se_sess->sess_kref); @@ -2250,11 +2251,14 @@ void target_sess_cmd_list_set_waiting(struct se_session *se_sess) unsigned long flags; spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); - - WARN_ON(se_sess->sess_tearing_down); + if (se_sess->sess_tearing_down) { + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + return; + } se_sess->sess_tearing_down = 1; + list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list); - list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) + list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list) se_cmd->cmd_wait_set = 1; spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); @@ -2267,9 +2271,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; + unsigned long flags; list_for_each_entry_safe(se_cmd, tmp_cmd, - &se_sess->sess_cmd_list, se_cmd_list) { + &se_sess->sess_wait_list, se_cmd_list) { list_del(&se_cmd->se_cmd_list); pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:" @@ -2283,6 +2288,11 @@ void target_wait_for_sess_cmds(struct se_session *se_sess) se_cmd->se_tfo->release_cmd(se_cmd); } + + spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); + WARN_ON(!list_empty(&se_sess->sess_cmd_list)); + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + } EXPORT_SYMBOL(target_wait_for_sess_cmds); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa..4ea4f98 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v1.1 From 1d19f7800d643b270b28d0a969c5eca455d54397 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 01:30:01 -0700 Subject: ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 32 ++++++++++++++++++++++++-------- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 + 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 564024e..3f3f041 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2227,6 +2227,27 @@ static void srpt_close_ch(struct srpt_rdma_ch *ch) } /** + * srpt_shutdown_session() - Whether or not a session may be shut down. + */ +static int srpt_shutdown_session(struct se_session *se_sess) +{ + struct srpt_rdma_ch *ch = se_sess->fabric_sess_ptr; + unsigned long flags; + + spin_lock_irqsave(&ch->spinlock, flags); + if (ch->in_shutdown) { + spin_unlock_irqrestore(&ch->spinlock, flags); + return true; + } + + ch->in_shutdown = true; + target_sess_cmd_list_set_waiting(se_sess); + spin_unlock_irqrestore(&ch->spinlock, flags); + + return true; +} + +/** * srpt_drain_channel() - Drain a channel by resetting the IB queue pair. * @cm_id: Pointer to the CM ID of the channel to be drained. * @@ -2264,6 +2285,9 @@ static void srpt_drain_channel(struct ib_cm_id *cm_id) spin_unlock_irq(&sdev->spinlock); if (do_reset) { + if (ch->sess) + srpt_shutdown_session(ch->sess); + ret = srpt_ch_qp_err(ch); if (ret < 0) printk(KERN_ERR "Setting queue pair in error state" @@ -3467,14 +3491,6 @@ static void srpt_release_cmd(struct se_cmd *se_cmd) } /** - * srpt_shutdown_session() - Whether or not a session may be shut down. - */ -static int srpt_shutdown_session(struct se_session *se_sess) -{ - return true; -} - -/** * srpt_close_session() - Forcibly close a session. * * Callback function invoked by the TCM core to clean up sessions associated diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 4caf55c..3dae156 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -325,6 +325,7 @@ struct srpt_rdma_ch { u8 sess_name[36]; struct work_struct release_work; struct completion *release_done; + bool in_shutdown; }; /** -- cgit v1.1 From 1e00227d4e8017ac9c3f73bf949a06c6e27f5122 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:02 +0100 Subject: MN10300: Fix ret_from_kernel_thread ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics") Reported-by: Ken Cox Signed-off-by: David Howells Acked-by: Ken Cox Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 68fcab8..9420057 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -60,6 +60,7 @@ ENTRY(ret_from_kernel_thread) mov (REG_D0,fp),d0 mov (REG_A0,fp),a0 calls (a0) + GET_THREAD_INFO a2 # A2 must be set on return from sys_exit() clr d0 mov d0,(REG_D0,fp) jmp syscall_exit -- cgit v1.1 From d17fc238ac1486906ff724b4a5fe4ec169f554c5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:10 +0100 Subject: MN10300: Enable IRQs more in system call exit work path Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 9420057..222152a 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -108,10 +108,10 @@ syscall_exit_work: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode - btst _TIF_SYSCALL_TRACE,d2 - beq work_pending LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead + btst _TIF_SYSCALL_TRACE,d2 + beq work_pending mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) jmp resume_userspace @@ -124,6 +124,7 @@ work_pending: work_resched: call schedule[],0 +resume_userspace: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti LOCAL_IRQ_DISABLE @@ -132,6 +133,8 @@ work_resched: mov (TI_flags,a2),d2 btst _TIF_WORK_MASK,d2 beq restore_all + + LOCAL_IRQ_ENABLE btst _TIF_NEED_RESCHED,d2 bne work_resched @@ -170,17 +173,6 @@ ret_from_intr: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode -ENTRY(resume_userspace) - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - - # is there any work to be done on int/exception return? - mov (TI_flags,a2),d2 - btst _TIF_WORK_MASK,d2 - bne work_pending - jmp restore_all - #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) LOCAL_IRQ_DISABLE -- cgit v1.1 From b8bc9b0237873e814266566f84003d73799f170f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:17 +0100 Subject: MN10300: ASB2305's PCI code needs the definition of XIRQ1 The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 1adcf02..e37fac0 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "pci-asb2305.h" unsigned int pci_probe = 1; -- cgit v1.1 From 1aeeac7ad484e1bea6fe602880893b3074adb40a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:25 +0100 Subject: MN10300: Need pci_iomap() and __pci_ioport_map() defining Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/pci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 8137c25..6f31cc0 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -103,4 +103,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#include + #endif /* _ASM_PCI_H */ -- cgit v1.1 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- drivers/acpi/apei/cper.c | 18 ------------------ drivers/acpi/apei/ghes.c | 4 +++- drivers/pci/pcie/aer/aerdrv_core.c | 5 ++++- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- include/linux/aer.h | 5 +++-- 5 files changed, 12 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index fefc2ca..33dc6a0 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = { static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, const struct acpi_hest_generic_data *gdata) { -#ifdef CONFIG_ACPI_APEI_PCIEAER - struct pci_dev *dev; -#endif - if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? @@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, printk( "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); -#ifdef CONFIG_ACPI_APEI_PCIEAER - dev = pci_get_domain_bus_and_slot(pcie->device_id.segment, - pcie->device_id.bus, pcie->device_id.function); - if (!dev) { - pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n", - pcie->device_id.segment, pcie->device_id.bus, - pcie->device_id.slot, pcie->device_id.function); - return; - } - if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) - cper_print_aer(pfx, dev, gdata->error_severity, - (struct aer_capability_regs *) pcie->aer_info); - pci_dev_put(dev); -#endif } static const char *apei_estatus_section_flag_strs[] = { diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8a..403baf4 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes, aer_severity = cper_severity_to_aer(sev); aer_recover_queue(pcie_err->device_id.segment, pcie_err->device_id.bus, - devfn, aer_severity); + devfn, aer_severity, + (struct aer_capability_regs *) + pcie_err->aer_info); } } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8ec8b4f..0f4554e 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -580,6 +580,7 @@ struct aer_recover_entry u8 devfn; u16 domain; int severity; + struct aer_capability_regs *regs; }; static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry, @@ -593,7 +594,7 @@ static DEFINE_SPINLOCK(aer_recover_ring_lock); static DECLARE_WORK(aer_recover_work, aer_recover_work_func); void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity) + int severity, struct aer_capability_regs *aer_regs) { unsigned long flags; struct aer_recover_entry entry = { @@ -601,6 +602,7 @@ void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, .devfn = devfn, .domain = domain, .severity = severity, + .regs = aer_regs, }; spin_lock_irqsave(&aer_recover_ring_lock, flags); @@ -627,6 +629,7 @@ static void aer_recover_work_func(struct work_struct *work) PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn)); continue; } + cper_print_aer(pdev, entry.severity, entry.regs); do_recovery(pdev, entry.severity); pci_dev_put(pdev); } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 5ab1425..2c7c9f5 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -220,7 +220,7 @@ int cper_severity_to_aer(int cper_severity) } EXPORT_SYMBOL_GPL(cper_severity_to_aer); -void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, +void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer) { int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0; @@ -244,7 +244,7 @@ void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, agent = AER_GET_AGENT(aer_severity, status); dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask); - cper_print_bits(prefix, status, status_strs, status_strs_size); + cper_print_bits("", status, status_strs, status_strs_size); dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n", aer_error_layer[layer], aer_agent_string[agent]); if (aer_severity != AER_CORRECTABLE) diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b..737f90a 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v1.1 From eb54d43707c69340581940e1fcaecb4d7d17b814 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 14 May 2013 14:37:56 -0400 Subject: NFS: Fix security flavor negotiation with legacy binary mounts Darrick J. Wong reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d44 "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: Darrick J. Wong Signed-off-by: Chuck Lever Tested-by: Darrick J. Wong Acked-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a366107..2d7525f 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1942,6 +1942,7 @@ static int nfs23_validate_mount_data(void *options, args->namlen = data->namlen; args->bsize = data->bsize; + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->flags & NFS_MOUNT_SECFLAVOUR) args->auth_flavors[0] = data->pseudoflavor; if (!args->nfs_server.hostname) @@ -2637,6 +2638,7 @@ static int nfs4_validate_mount_data(void *options, goto out_no_address; args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port); + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->auth_flavourlen) { if (data->auth_flavourlen > 1) goto out_inval_auth; -- cgit v1.1 From 5489e948dc0f41a249c109d74612bf5aceab8f38 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 30 May 2013 22:23:44 +0200 Subject: MAINTAINERS: Framebuffer Layer maintainers update Tomi and I will now take care of the Framebuffer Layer The git tree is now on kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Tomi Valkeinen Cc: Olof Johansson Cc: Andrew Morton Cc: Arnd Bergmann Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495..7714c3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3322,11 +3322,12 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Florian Tobias Schandinat +M: Jean-Christophe Plagniol-Villard +M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://github.com/schandinat/linux-2.6.git fbdev-next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git S: Maintained F: Documentation/fb/ F: Documentation/devicetree/bindings/fb/ -- cgit v1.1 From 08fb39051f5581df45ae2a20c6cf2d0c4cddf7c2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:00 +1000 Subject: xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit f648167f3ac79018c210112508c732ea9bf67c7b) --- fs/xfs/xfs_qm_syscalls.c | 40 +++++++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 17 deletions(-) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index c41190c..6cdf6ff 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -489,31 +489,36 @@ xfs_qm_scall_setqlim( if ((newlim->d_fieldmask & XFS_DQ_MASK) == 0) return 0; - tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); - error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), - 0, 0, XFS_DEFAULT_LOG_COUNT); - if (error) { - xfs_trans_cancel(tp, 0); - return (error); - } - /* * We don't want to race with a quotaoff so take the quotaoff lock. - * (We don't hold an inode lock, so there's nothing else to stop - * a quotaoff from happening). (XXXThis doesn't currently happen - * because we take the vfslock before calling xfs_qm_sysent). + * We don't hold an inode lock, so there's nothing else to stop + * a quotaoff from happening. */ mutex_lock(&q->qi_quotaofflock); /* - * Get the dquot (locked), and join it to the transaction. - * Allocate the dquot if this doesn't exist. + * Get the dquot (locked) before we start, as we need to do a + * transaction to allocate it if it doesn't exist. Once we have the + * dquot, unlock it so we can start the next transaction safely. We hold + * a reference to the dquot, so it's safe to do this unlock/lock without + * it being reclaimed in the mean time. */ - if ((error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp))) { - xfs_trans_cancel(tp, XFS_TRANS_ABORT); + error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp); + if (error) { ASSERT(error != ENOENT); goto out_unlock; } + xfs_dqunlock(dqp); + + tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); + error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), + 0, 0, XFS_DEFAULT_LOG_COUNT); + if (error) { + xfs_trans_cancel(tp, 0); + goto out_rele; + } + + xfs_dqlock(dqp); xfs_trans_dqjoin(tp, dqp); ddq = &dqp->q_core; @@ -621,9 +626,10 @@ xfs_qm_scall_setqlim( xfs_trans_log_dquot(tp, dqp); error = xfs_trans_commit(tp, 0); - xfs_qm_dqrele(dqp); - out_unlock: +out_rele: + xfs_qm_dqrele(dqp); +out_unlock: mutex_unlock(&q->qi_quotaofflock); return error; } -- cgit v1.1 From 2962f5a5dcc56f69cbf62121a7be67cc15d6940b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:25 +1000 Subject: xfs: kill suid/sgid through the truncate path. XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6) --- fs/xfs/xfs_iops.c | 47 ++++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d82efaa..ca9ecaa 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -455,6 +455,28 @@ xfs_vn_getattr( return 0; } +static void +xfs_setattr_mode( + struct xfs_trans *tp, + struct xfs_inode *ip, + struct iattr *iattr) +{ + struct inode *inode = VFS_I(ip); + umode_t mode = iattr->ia_mode; + + ASSERT(tp); + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); + + if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) + mode &= ~S_ISGID; + + ip->i_d.di_mode &= S_IFMT; + ip->i_d.di_mode |= mode & ~S_IFMT; + + inode->i_mode &= S_IFMT; + inode->i_mode |= mode & ~S_IFMT; +} + int xfs_setattr_nonsize( struct xfs_inode *ip, @@ -606,18 +628,8 @@ xfs_setattr_nonsize( /* * Change file access modes. */ - if (mask & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - mode &= ~S_ISGID; - - ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= mode & ~S_IFMT; - - inode->i_mode &= S_IFMT; - inode->i_mode |= mode & ~S_IFMT; - } + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); /* * Change file access or modified times. @@ -714,9 +726,8 @@ xfs_setattr_size( return XFS_ERROR(error); ASSERT(S_ISREG(ip->i_d.di_mode)); - ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| - ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID| - ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); + ASSERT((mask & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| + ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); if (!(flags & XFS_ATTR_NOLOCK)) { lock_flags |= XFS_IOLOCK_EXCL; @@ -860,6 +871,12 @@ xfs_setattr_size( xfs_inode_clear_eofblocks_tag(ip); } + /* + * Change file access modes. + */ + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); + if (mask & ATTR_CTIME) { inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; -- cgit v1.1 From 7d2ffe80aa000a149246b3745968634192eb5358 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:23 +1000 Subject: xfs: fix split buffer vector log recovery support A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 709da6a61aaf12181a8eea8443919ae5fc1b731d) --- fs/xfs/xfs_buf_item.c | 7 +------ fs/xfs/xfs_log_recover.c | 11 +++++++++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index cf26347..4ec4317 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -262,12 +262,7 @@ xfs_buf_item_format_segment( vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; -/* - * You would think we need to bump the nvecs here too, but we do not - * this number is used by recovery, and it gets confused by the boundary - * split here - * nvecs++; - */ + nvecs++; vecp++; first_bit = next_bit; last_bit = next_bit; diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 93f03ec..d9e4d3c 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2097,6 +2097,17 @@ xlog_recover_do_reg_buffer( ((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT)); /* + * The dirty regions logged in the buffer, even though + * contiguous, may span multiple chunks. This is because the + * dirty region may span a physical page boundary in a buffer + * and hence be split into two separate vectors for writing into + * the log. Hence we need to trim nbits back to the length of + * the current region being copied out of the log. + */ + if (item->ri_buf[i].i_len < (nbits << XFS_BLF_SHIFT)) + nbits = item->ri_buf[i].i_len >> XFS_BLF_SHIFT; + + /* * Do a sanity check if this is a dquot buffer. Just checking * the first dquot in the buffer should do. XXXThis is * probably a good thing to do for other buf types also. -- cgit v1.1 From 1de09d1ae48152e56399aba0bfd984fb0ddae6b0 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:20 +1000 Subject: xfs: fix incorrect remote symlink block count When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 321a95839e65db3759a07a3655184b0283af90fe) --- fs/xfs/xfs_symlink.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c index 5f234389..195a403 100644 --- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -56,16 +56,9 @@ xfs_symlink_blocks( struct xfs_mount *mp, int pathlen) { - int fsblocks = 0; - int len = pathlen; + int buflen = XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - do { - fsblocks++; - len -= XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - } while (len > 0); - - ASSERT(fsblocks <= XFS_SYMLINK_MAPS); - return fsblocks; + return (pathlen + buflen - 1) / buflen; } static int @@ -405,7 +398,7 @@ xfs_symlink( if (pathlen <= XFS_LITINO(mp, dp->i_d.di_version)) fs_blocks = 0; else - fs_blocks = XFS_B_TO_FSB(mp, pathlen); + fs_blocks = xfs_symlink_blocks(mp, pathlen); resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks); error = xfs_trans_reserve(tp, resblks, XFS_SYMLINK_LOG_RES(mp), 0, XFS_TRANS_PERM_LOG_RES, XFS_SYMLINK_LOG_COUNT); @@ -512,7 +505,7 @@ xfs_symlink( cur_chunk = target_path; offset = 0; for (n = 0; n < nmaps; n++) { - char *buf; + char *buf; d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock); byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount); @@ -525,9 +518,7 @@ xfs_symlink( bp->b_ops = &xfs_symlink_buf_ops; byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt); - if (pathlen < byte_cnt) { - byte_cnt = pathlen; - } + byte_cnt = min(byte_cnt, pathlen); buf = bp->b_addr; buf += xfs_symlink_hdr_set(mp, ip->i_ino, offset, @@ -542,6 +533,7 @@ xfs_symlink( xfs_trans_log_buf(tp, bp, 0, (buf + byte_cnt - 1) - (char *)bp->b_addr); } + ASSERT(pathlen == 0); } /* -- cgit v1.1 From e7927e879d12d27aa06b9bbed57cc32dcd7d17fd Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:26 +1000 Subject: xfs: add fsgeom flag for v5 superblock support. Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by: Dave Chinner Reviewed-by: Eric Sandeen Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 74137fff067961c9aca1e14d073805c3de8549bd) --- fs/xfs/xfs_fs.h | 1 + fs/xfs/xfs_fsops.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6dda3f9..d046955 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -236,6 +236,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_PROJID32 0x0800 /* 32-bit project IDs */ #define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ +#define XFS_FSOP_GEOM_FLAGS_V5SB 0x8000 /* version 5 superblock */ /* diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 87595b2..3c3644e 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -99,7 +99,9 @@ xfs_fs_geometry( (xfs_sb_version_hasattr2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR2 : 0) | (xfs_sb_version_hasprojid32bit(&mp->m_sb) ? - XFS_FSOP_GEOM_FLAGS_PROJID32 : 0); + XFS_FSOP_GEOM_FLAGS_PROJID32 : 0) | + (xfs_sb_version_hascrc(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_V5SB : 0); geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ? mp->m_sb.sb_logsectsize : BBSIZE; geo->rtsectsize = mp->m_sb.sb_blocksize; -- cgit v1.1 From 7c9950fd2ac97431230544142d5e652e1b948372 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:24 +1000 Subject: xfs: disable swap extents ioctl on CRC enabled filesystems Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 02f75405a75eadfb072609f6bf839e027de6a29a) --- fs/xfs/xfs_dfrag.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index f852b08..c407e1c 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -219,6 +219,14 @@ xfs_swap_extents( int taforkblks = 0; __uint64_t tmp; + /* + * We have no way of updating owner information in the BMBT blocks for + * each inode on CRC enabled filesystems, so to avoid corrupting the + * this metadata we simply don't allow extent swaps to occur. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + return XFS_ERROR(EINVAL); + tempifp = kmem_alloc(sizeof(xfs_ifork_t), KM_MAYFAIL); if (!tempifp) { error = XFS_ERROR(ENOMEM); -- cgit v1.1 From e400d27d1690d609f203f2d7d8efebc98cbc3089 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 28 May 2013 18:37:17 +1000 Subject: xfs: fix dir3 freespace block corruption When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 5ae6e6a401957698f2bd8c9f4a86d86d02199fea) --- fs/xfs/xfs_dir2_format.h | 1 + fs/xfs/xfs_dir2_node.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index a3b1bd8..995f1f5 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -715,6 +715,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ + __be32 pad; /* 64 bit alignment. */ }; struct xfs_dir3_free { diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 5246de4..2226a00 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -263,18 +263,19 @@ xfs_dir3_free_get_buf( * Initialize the new block to be empty, and remember * its first slot as our empty slot. */ - hdr.magic = XFS_DIR2_FREE_MAGIC; - hdr.firstdb = 0; - hdr.nused = 0; - hdr.nvalid = 0; + memset(bp->b_addr, 0, sizeof(struct xfs_dir3_free_hdr)); + memset(&hdr, 0, sizeof(hdr)); + if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dir3_free_hdr *hdr3 = bp->b_addr; hdr.magic = XFS_DIR3_FREE_MAGIC; + hdr3->hdr.blkno = cpu_to_be64(bp->b_bn); hdr3->hdr.owner = cpu_to_be64(dp->i_ino); uuid_copy(&hdr3->hdr.uuid, &mp->m_sb.sb_uuid); - } + } else + hdr.magic = XFS_DIR2_FREE_MAGIC; xfs_dir3_free_hdr_to_disk(bp->b_addr, &hdr); *bpp = bp; return 0; @@ -1921,8 +1922,6 @@ xfs_dir2_node_addname_int( */ freehdr.firstdb = (fbno - XFS_DIR2_FREE_FIRSTDB(mp)) * xfs_dir3_free_max_bests(mp); - free->hdr.nvalid = 0; - free->hdr.nused = 0; } else { free = fbp->b_addr; bests = xfs_dir3_free_bests_p(mp, free); -- cgit v1.1 From 9531e2de6b7f04bd734b4bbc1e16a6955121615a Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:01 +1000 Subject: xfs: remote attribute allocation may be contiguous When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 90253cf142469a40f89f989904abf0a1e500e1a6) --- fs/xfs/xfs_attr_remote.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index dee8446..aad95b0 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -359,6 +359,11 @@ xfs_attr_rmtval_set( * into requiring more blocks. e.g. for 512 byte blocks, we'll * spill for another block every 9 headers we require in this * loop. + * + * Note that this can result in contiguous allocation of blocks, + * so we don't use all the space we allocate for headers as we + * have one less header for each contiguous allocation that + * occurs in the map/write loop below. */ if (crcs && blkcnt == 0) { int total_len; @@ -439,7 +444,6 @@ xfs_attr_rmtval_set( lblkno += map.br_blockcount; } ASSERT(valuelen == 0); - ASSERT(hdrcnt == 0); return 0; } -- cgit v1.1 From 551b382f5368900d6d82983505cb52553c946a2b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:02 +1000 Subject: xfs: remote attribute read too short Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 913e96bc292e1bb248854686c79d6545ef3ee720) --- fs/xfs/xfs_attr_remote.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index aad95b0..bcdc07c 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -52,9 +52,11 @@ xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) { - int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, - mp->m_sb.sb_blocksize); - return (attrlen + buflen - 1) / buflen; + if (xfs_sb_version_hascrc(&mp->m_sb)) { + int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize); + return (attrlen + buflen - 1) / buflen; + } + return XFS_B_TO_FSB(mp, attrlen); } static bool @@ -206,8 +208,9 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, map, &nmap, + blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return error; @@ -227,8 +230,8 @@ xfs_attr_rmtval_get( if (error) return error; - byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length)); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); src = bp->b_addr; if (xfs_sb_version_hascrc(&mp->m_sb)) { -- cgit v1.1 From 26f714450c3907ce07c41a0bd1bea40368e0b4da Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:03 +1000 Subject: xfs: remote attribute tail zeroing does too much When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 4af3644c9a53eb2f1ecf69cc53576561b64be4c6) --- fs/xfs/xfs_attr_remote.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index bcdc07c..e207bf0 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -296,10 +296,7 @@ xfs_attr_rmtval_set( * and we may not need that many, so we have to handle this when * allocating the blocks below. */ - if (!crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - else - blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); + blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); @@ -394,8 +391,11 @@ xfs_attr_rmtval_set( */ lblkno = args->rmtblkno; valuelen = args->valuelen; + blkcnt = args->rmtblkcnt; while (valuelen > 0) { int byte_cnt; + int hdr_size; + int dblkcnt; char *buf; /* @@ -404,7 +404,7 @@ xfs_attr_rmtval_set( xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); @@ -413,26 +413,25 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); - bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0); + bp = xfs_buf_get(mp->m_ddev_targp, dblkno, dblkcnt, 0); if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - - byte_cnt = BBTOB(bp->b_length); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); - if (valuelen < byte_cnt) - byte_cnt = valuelen; - buf = bp->b_addr; - buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, + + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, byte_cnt, bp); - memcpy(buf, src, byte_cnt); + ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - if (byte_cnt < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt, - BBTOB(bp->b_length) - byte_cnt); + memcpy(buf + hdr_size, src, byte_cnt); + + if (byte_cnt + hdr_size < BBTOB(bp->b_length)) + xfs_buf_zero(bp, byte_cnt + hdr_size, + BBTOB(bp->b_length) - byte_cnt - hdr_size); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); @@ -442,9 +441,9 @@ xfs_attr_rmtval_set( src += byte_cnt; valuelen -= byte_cnt; offset += byte_cnt; - hdrcnt--; lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; } ASSERT(valuelen == 0); return 0; -- cgit v1.1 From 58a72281555bf301f6dff24db2db205c87ef8db1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:04 +1000 Subject: xfs: correctly map remote attr buffers during removal If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6863ef8449f1908c19f43db572e4474f24a1e9da) --- fs/xfs/xfs_attr_remote.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index e207bf0..d8bcb2d 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -468,19 +468,25 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) mp = args->dp->i_mount; /* - * Roll through the "value", invalidating the attribute value's - * blocks. + * Roll through the "value", invalidating the attribute value's blocks. + * Note that args->rmtblkcnt is the minimum number of data blocks we'll + * see for a CRC enabled remote attribute. Each extent will have a + * header, and so we may have more blocks than we realise here. If we + * fail to map the blocks correctly, we'll have problems with the buffer + * lookups. */ lblkno = args->rmtblkno; - valuelen = args->rmtblkcnt; + valuelen = args->valuelen; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); while (valuelen > 0) { + int dblkcnt; + /* * Try to remember where we decided to put the value. */ nmap = 1; error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, - XFS_BMAPI_ATTRFORK); + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); ASSERT(nmap == 1); @@ -488,28 +494,31 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); /* * If the "remote" value is in the cache, remove it. */ - bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK); + bp = xfs_incore(mp->m_ddev_targp, dblkno, dblkcnt, XBF_TRYLOCK); if (bp) { xfs_buf_stale(bp); xfs_buf_relse(bp); bp = NULL; } - valuelen -= map.br_blockcount; + valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, + XFS_FSB_TO_B(mp, map.br_blockcount)); lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; + blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ + blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; - blkcnt = args->rmtblkcnt; done = 0; while (!done) { xfs_bmap_init(args->flist, args->firstblock); -- cgit v1.1 From 9e80c76205b46b338cb56c336148f54b2326342f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:05 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 8517de2a81da830f5d90da66b4799f4040c76dc9) --- fs/xfs/xfs_attr_leaf.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 0bce1b3..79ece72 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2181,14 +2181,24 @@ xfs_attr3_leaf_unbalance( struct xfs_attr_leafblock *tmp_leaf; struct xfs_attr3_icleaf_hdr tmphdr; - tmp_leaf = kmem_alloc(state->blocksize, KM_SLEEP); - memset(tmp_leaf, 0, state->blocksize); - memset(&tmphdr, 0, sizeof(tmphdr)); + tmp_leaf = kmem_zalloc(state->blocksize, KM_SLEEP); + + /* + * Copy the header into the temp leaf so that all the stuff + * not in the incore header is present and gets copied back in + * once we've moved all the entries. + */ + memcpy(tmp_leaf, save_leaf, xfs_attr3_leaf_hdr_size(save_leaf)); + memset(&tmphdr, 0, sizeof(tmphdr)); tmphdr.magic = savehdr.magic; tmphdr.forw = savehdr.forw; tmphdr.back = savehdr.back; tmphdr.firstused = state->blocksize; + + /* write the header to the temp buffer to initialise it */ + xfs_attr3_leaf_hdr_to_disk(tmp_leaf, &tmphdr); + if (xfs_attr3_leaf_order(save_blk->bp, &savehdr, drop_blk->bp, &drophdr)) { xfs_attr3_leaf_moveents(drop_leaf, &drophdr, 0, -- cgit v1.1 From 634fd5322a3e6ae632dcf5f20eebc0583ba50838 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:06 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit d4c712bcf26a25c2b67c90e44e0b74c7993b5334) --- fs/xfs/xfs_attr_leaf.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 79ece72..5b03d15 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1445,11 +1445,12 @@ xfs_attr3_leaf_add_work( STATIC void xfs_attr3_leaf_compact( struct xfs_da_args *args, - struct xfs_attr3_icleaf_hdr *ichdr_d, + struct xfs_attr3_icleaf_hdr *ichdr_dst, struct xfs_buf *bp) { - xfs_attr_leafblock_t *leaf_s, *leaf_d; - struct xfs_attr3_icleaf_hdr ichdr_s; + struct xfs_attr_leafblock *leaf_src; + struct xfs_attr_leafblock *leaf_dst; + struct xfs_attr3_icleaf_hdr ichdr_src; struct xfs_trans *trans = args->trans; struct xfs_mount *mp = trans->t_mountp; char *tmpbuffer; @@ -1457,29 +1458,38 @@ xfs_attr3_leaf_compact( trace_xfs_attr_leaf_compact(args); tmpbuffer = kmem_alloc(XFS_LBSIZE(mp), KM_SLEEP); - ASSERT(tmpbuffer != NULL); memcpy(tmpbuffer, bp->b_addr, XFS_LBSIZE(mp)); memset(bp->b_addr, 0, XFS_LBSIZE(mp)); + leaf_src = (xfs_attr_leafblock_t *)tmpbuffer; + leaf_dst = bp->b_addr; /* - * Copy basic information + * Copy the on-disk header back into the destination buffer to ensure + * all the information in the header that is not part of the incore + * header structure is preserved. */ - leaf_s = (xfs_attr_leafblock_t *)tmpbuffer; - leaf_d = bp->b_addr; - ichdr_s = *ichdr_d; /* struct copy */ - ichdr_d->firstused = XFS_LBSIZE(mp); - ichdr_d->usedbytes = 0; - ichdr_d->count = 0; - ichdr_d->holes = 0; - ichdr_d->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_s); - ichdr_d->freemap[0].size = ichdr_d->firstused - ichdr_d->freemap[0].base; + memcpy(bp->b_addr, tmpbuffer, xfs_attr3_leaf_hdr_size(leaf_src)); + + /* Initialise the incore headers */ + ichdr_src = *ichdr_dst; /* struct copy */ + ichdr_dst->firstused = XFS_LBSIZE(mp); + ichdr_dst->usedbytes = 0; + ichdr_dst->count = 0; + ichdr_dst->holes = 0; + ichdr_dst->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_src); + ichdr_dst->freemap[0].size = ichdr_dst->firstused - + ichdr_dst->freemap[0].base; + + + /* write the header back to initialise the underlying buffer */ + xfs_attr3_leaf_hdr_to_disk(leaf_dst, ichdr_dst); /* * Copy all entry's in the same (sorted) order, * but allocate name/value pairs packed and in sequence. */ - xfs_attr3_leaf_moveents(leaf_s, &ichdr_s, 0, leaf_d, ichdr_d, 0, - ichdr_s.count, mp); + xfs_attr3_leaf_moveents(leaf_src, &ichdr_src, 0, leaf_dst, ichdr_dst, 0, + ichdr_src.count, mp); /* * this logs the entire buffer, but the caller must write the header * back to the buffer when it is finished modifying it. -- cgit v1.1 From 7bc0dc271e494e12be3afd3c6431e5216347c624 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:08 +1000 Subject: xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ad1858d77771172e08016890f0eb2faedec3ecee) --- fs/xfs/xfs_attr_leaf.c | 13 +- fs/xfs/xfs_attr_remote.c | 381 ++++++++++++++++++++++++++++------------------- fs/xfs/xfs_attr_remote.h | 10 ++ fs/xfs/xfs_buf.c | 1 + 4 files changed, 247 insertions(+), 158 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 5b03d15..d788302 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1412,7 +1412,7 @@ xfs_attr3_leaf_add_work( name_rmt->valuelen = 0; name_rmt->valueblk = 0; args->rmtblkno = 1; - args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); } xfs_trans_log_buf(args->trans, bp, XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index), @@ -2354,8 +2354,9 @@ xfs_attr3_leaf_lookup_int( args->index = probe; args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks( + args->dp->i_mount, + args->valuelen); return XFS_ERROR(EEXIST); } } @@ -2406,7 +2407,8 @@ xfs_attr3_leaf_getvalue( ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0); valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(args->dp->i_mount, + valuelen); if (args->flags & ATTR_KERNOVAL) { args->valuelen = valuelen; return 0; @@ -2732,7 +2734,8 @@ xfs_attr3_leaf_list_int( args.valuelen = valuelen; args.value = kmem_alloc(valuelen, KM_SLEEP | KM_NOFS); args.rmtblkno = be32_to_cpu(name_rmt->valueblk); - args.rmtblkcnt = XFS_B_TO_FSB(args.dp->i_mount, valuelen); + args.rmtblkcnt = xfs_attr3_rmt_blocks( + args.dp->i_mount, valuelen); retval = xfs_attr_rmtval_get(&args); if (retval) return retval; diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index d8bcb2d..ef6b0c1 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -47,7 +47,7 @@ * Each contiguous block has a header, so it is not just a simple attribute * length to FSB conversion. */ -static int +int xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) @@ -59,12 +59,43 @@ xfs_attr3_rmt_blocks( return XFS_B_TO_FSB(mp, attrlen); } +/* + * Checking of the remote attribute header is split into two parts. The verifier + * does CRC, location and bounds checking, the unpacking function checks the + * attribute parameters and owner. + */ +static bool +xfs_attr3_rmt_hdr_ok( + struct xfs_mount *mp, + void *ptr, + xfs_ino_t ino, + uint32_t offset, + uint32_t size, + xfs_daddr_t bno) +{ + struct xfs_attr3_rmt_hdr *rmt = ptr; + + if (bno != be64_to_cpu(rmt->rm_blkno)) + return false; + if (offset != be32_to_cpu(rmt->rm_offset)) + return false; + if (size != be32_to_cpu(rmt->rm_bytes)) + return false; + if (ino != be64_to_cpu(rmt->rm_owner)) + return false; + + /* ok */ + return true; +} + static bool xfs_attr3_rmt_verify( - struct xfs_buf *bp) + struct xfs_mount *mp, + void *ptr, + int fsbsize, + xfs_daddr_t bno) { - struct xfs_mount *mp = bp->b_target->bt_mount; - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return false; @@ -72,7 +103,9 @@ xfs_attr3_rmt_verify( return false; if (!uuid_equal(&rmt->rm_uuid, &mp->m_sb.sb_uuid)) return false; - if (bp->b_bn != be64_to_cpu(rmt->rm_blkno)) + if (be64_to_cpu(rmt->rm_blkno) != bno) + return false; + if (be32_to_cpu(rmt->rm_bytes) > fsbsize - sizeof(*rmt)) return false; if (be32_to_cpu(rmt->rm_offset) + be32_to_cpu(rmt->rm_bytes) >= XATTR_SIZE_MAX) @@ -88,17 +121,40 @@ xfs_attr3_rmt_read_verify( struct xfs_buf *bp) { struct xfs_mount *mp = bp->b_target->bt_mount; + char *ptr; + int len; + bool corrupt = false; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF) || - !xfs_attr3_rmt_verify(bp)) { + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_verify_cksum(ptr, XFS_LBSIZE(mp), + XFS_ATTR3_RMT_CRC_OFF)) { + corrupt = true; + break; + } + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + corrupt = true; + break; + } + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; + } + + if (corrupt) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, EFSCORRUPTED); - } + } else + ASSERT(len == 0); } static void @@ -107,23 +163,39 @@ xfs_attr3_rmt_write_verify( { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_buf_log_item *bip = bp->b_fspriv; + char *ptr; + int len; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_attr3_rmt_verify(bp)) { - XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); - xfs_buf_ioerror(bp, EFSCORRUPTED); - return; - } + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + XFS_CORRUPTION_ERROR(__func__, + XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + return; + } + if (bip) { + struct xfs_attr3_rmt_hdr *rmt; - if (bip) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; - rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + rmt = (struct xfs_attr3_rmt_hdr *)ptr; + rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + } + xfs_update_cksum(ptr, XFS_LBSIZE(mp), XFS_ATTR3_RMT_CRC_OFF); + + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; } - xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF); + ASSERT(len == 0); } const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { @@ -131,15 +203,16 @@ const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { .verify_write = xfs_attr3_rmt_write_verify, }; -static int +STATIC int xfs_attr3_rmt_hdr_set( struct xfs_mount *mp, + void *ptr, xfs_ino_t ino, uint32_t offset, uint32_t size, - struct xfs_buf *bp) + xfs_daddr_t bno) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return 0; @@ -149,36 +222,107 @@ xfs_attr3_rmt_hdr_set( rmt->rm_bytes = cpu_to_be32(size); uuid_copy(&rmt->rm_uuid, &mp->m_sb.sb_uuid); rmt->rm_owner = cpu_to_be64(ino); - rmt->rm_blkno = cpu_to_be64(bp->b_bn); - bp->b_ops = &xfs_attr3_rmt_buf_ops; + rmt->rm_blkno = cpu_to_be64(bno); return sizeof(struct xfs_attr3_rmt_hdr); } /* - * Checking of the remote attribute header is split into two parts. the verifier - * does CRC, location and bounds checking, the unpacking function checks the - * attribute parameters and owner. + * Helper functions to copy attribute data in and out of the one disk extents */ -static bool -xfs_attr3_rmt_hdr_ok( - struct xfs_mount *mp, - xfs_ino_t ino, - uint32_t offset, - uint32_t size, - struct xfs_buf *bp) +STATIC int +xfs_attr_rmtval_copyout( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **dst) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + char *src = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); - if (offset != be32_to_cpu(rmt->rm_offset)) - return false; - if (size != be32_to_cpu(rmt->rm_bytes)) - return false; - if (ino != be64_to_cpu(rmt->rm_owner)) - return false; + ASSERT(len >= XFS_LBSIZE(mp)); - /* ok */ - return true; + while (len > 0 && *valuelen > 0) { + int hdr_size = 0; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min_t(int, *valuelen, byte_cnt); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (!xfs_attr3_rmt_hdr_ok(mp, src, ino, *offset, + byte_cnt, bno)) { + xfs_alert(mp, +"remote attribute header mismatch bno/off/len/owner (0x%llx/0x%x/Ox%x/0x%llx)", + bno, *offset, byte_cnt, ino); + return EFSCORRUPTED; + } + hdr_size = sizeof(struct xfs_attr3_rmt_hdr); + } + + memcpy(*dst, src + hdr_size, byte_cnt); + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + src += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *dst += byte_cnt; + *offset += byte_cnt; + } + return 0; +} + +STATIC void +xfs_attr_rmtval_copyin( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **src) +{ + char *dst = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); + + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0 && *valuelen > 0) { + int hdr_size; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min(*valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dst, ino, *offset, + byte_cnt, bno); + + memcpy(dst + hdr_size, *src, byte_cnt); + + /* + * If this is the last block, zero the remainder of it. + * Check that we are actually the last block, too. + */ + if (byte_cnt + hdr_size < XFS_LBSIZE(mp)) { + ASSERT(*valuelen - byte_cnt == 0); + ASSERT(len == XFS_LBSIZE(mp)); + memset(dst + hdr_size + byte_cnt, 0, + XFS_LBSIZE(mp) - hdr_size - byte_cnt); + } + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + dst += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *src += byte_cnt; + *offset += byte_cnt; + } } /* @@ -192,13 +336,12 @@ xfs_attr_rmtval_get( struct xfs_bmbt_irec map[ATTR_RMTVALUE_MAPSIZE]; struct xfs_mount *mp = args->dp->i_mount; struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno = args->rmtblkno; - void *dst = args->value; + char *dst = args->value; int valuelen = args->valuelen; int nmap; int error; - int blkcnt; + int blkcnt = args->rmtblkcnt; int i; int offset = 0; @@ -208,7 +351,6 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); @@ -217,45 +359,29 @@ xfs_attr_rmtval_get( ASSERT(nmap >= 1); for (i = 0; (i < nmap) && (valuelen > 0); i++) { - int byte_cnt; - char *src; + xfs_daddr_t dblkno; + int dblkcnt; ASSERT((map[i].br_startblock != DELAYSTARTBLOCK) && (map[i].br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock); - blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, - dblkno, blkcnt, 0, &bp, + dblkno, dblkcnt, 0, &bp, &xfs_attr3_rmt_buf_ops); if (error) return error; - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - - src = bp->b_addr; - if (xfs_sb_version_hascrc(&mp->m_sb)) { - if (!xfs_attr3_rmt_hdr_ok(mp, args->dp->i_ino, - offset, byte_cnt, bp)) { - xfs_alert(mp, -"remote attribute header does not match required off/len/owner (0x%x/Ox%x,0x%llx)", - offset, byte_cnt, args->dp->i_ino); - xfs_buf_relse(bp); - return EFSCORRUPTED; - - } - - src += sizeof(struct xfs_attr3_rmt_hdr); - } - - memcpy(dst, src, byte_cnt); + error = xfs_attr_rmtval_copyout(mp, bp, args->dp->i_ino, + &offset, &valuelen, + &dst); xfs_buf_relse(bp); + if (error) + return error; - offset += byte_cnt; - dst += byte_cnt; - valuelen -= byte_cnt; - + /* roll attribute extent map forwards */ lblkno += map[i].br_blockcount; + blkcnt -= map[i].br_blockcount; } } ASSERT(valuelen == 0); @@ -273,17 +399,13 @@ xfs_attr_rmtval_set( struct xfs_inode *dp = args->dp; struct xfs_mount *mp = dp->i_mount; struct xfs_bmbt_irec map; - struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno; xfs_fileoff_t lfileoff = 0; - void *src = args->value; + char *src = args->value; int blkcnt; int valuelen; int nmap; int error; - int hdrcnt = 0; - bool crcs = xfs_sb_version_hascrc(&mp->m_sb); int offset = 0; trace_xfs_attr_rmtval_set(args); @@ -292,21 +414,14 @@ xfs_attr_rmtval_set( * Find a "hole" in the attribute address space large enough for * us to drop the new attribute's value into. Because CRC enable * attributes have headers, we can't just do a straight byte to FSB - * conversion. We calculate the worst case block count in this case - * and we may not need that many, so we have to handle this when - * allocating the blocks below. + * conversion and have to take the header space into account. */ blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); - error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); if (error) return error; - /* Start with the attribute data. We'll allocate the rest afterwards. */ - if (crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - args->rmtblkno = lblkno = (xfs_dablk_t)lfileoff; args->rmtblkcnt = blkcnt; @@ -349,31 +464,6 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - hdrcnt++; - - /* - * If we have enough blocks for the attribute data, calculate - * how many extra blocks we need for headers. We might run - * through this multiple times in the case that the additional - * headers in the blocks needed for the data fragments spills - * into requiring more blocks. e.g. for 512 byte blocks, we'll - * spill for another block every 9 headers we require in this - * loop. - * - * Note that this can result in contiguous allocation of blocks, - * so we don't use all the space we allocate for headers as we - * have one less header for each contiguous allocation that - * occurs in the map/write loop below. - */ - if (crcs && blkcnt == 0) { - int total_len; - - total_len = args->valuelen + - hdrcnt * sizeof(struct xfs_attr3_rmt_hdr); - blkcnt = XFS_B_TO_FSB(mp, total_len); - blkcnt -= args->rmtblkcnt; - args->rmtblkcnt += blkcnt; - } /* * Start the next trans in the chain. @@ -390,17 +480,15 @@ xfs_attr_rmtval_set( * the INCOMPLETE flag. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; blkcnt = args->rmtblkcnt; + valuelen = args->valuelen; while (valuelen > 0) { - int byte_cnt; - int hdr_size; - int dblkcnt; - char *buf; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + + ASSERT(blkcnt > 0); - /* - * Try to remember where we decided to put the value. - */ xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, @@ -419,29 +507,17 @@ xfs_attr_rmtval_set( if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - buf = bp->b_addr; - - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, - byte_cnt, bp); - ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - memcpy(buf + hdr_size, src, byte_cnt); - - if (byte_cnt + hdr_size < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt + hdr_size, - BBTOB(bp->b_length) - byte_cnt - hdr_size); + xfs_attr_rmtval_copyin(mp, bp, args->dp->i_ino, &offset, + &valuelen, &src); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); if (error) return error; - src += byte_cnt; - valuelen -= byte_cnt; - offset += byte_cnt; + /* roll attribute extent map forwards */ lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; } @@ -454,19 +530,17 @@ xfs_attr_rmtval_set( * out-of-line buffer that it is stored on. */ int -xfs_attr_rmtval_remove(xfs_da_args_t *args) +xfs_attr_rmtval_remove( + struct xfs_da_args *args) { - xfs_mount_t *mp; - xfs_bmbt_irec_t map; - xfs_buf_t *bp; - xfs_daddr_t dblkno; - xfs_dablk_t lblkno; - int valuelen, blkcnt, nmap, error, done, committed; + struct xfs_mount *mp = args->dp->i_mount; + xfs_dablk_t lblkno; + int blkcnt; + int error; + int done; trace_xfs_attr_rmtval_remove(args); - mp = args->dp->i_mount; - /* * Roll through the "value", invalidating the attribute value's blocks. * Note that args->rmtblkcnt is the minimum number of data blocks we'll @@ -476,10 +550,13 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) * lookups. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); - while (valuelen > 0) { - int dblkcnt; + blkcnt = args->rmtblkcnt; + while (blkcnt > 0) { + struct xfs_bmbt_irec map; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + int nmap; /* * Try to remember where we decided to put the value. @@ -506,21 +583,19 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) bp = NULL; } - valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, - XFS_FSB_TO_B(mp, map.br_blockcount)); - lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ - blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; + blkcnt = args->rmtblkcnt; done = 0; while (!done) { + int committed; + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, diff --git a/fs/xfs/xfs_attr_remote.h b/fs/xfs/xfs_attr_remote.h index c7cca60..92a8fd7 100644 --- a/fs/xfs/xfs_attr_remote.h +++ b/fs/xfs/xfs_attr_remote.h @@ -20,6 +20,14 @@ #define XFS_ATTR3_RMT_MAGIC 0x5841524d /* XARM */ +/* + * There is one of these headers per filesystem block in a remote attribute. + * This is done to ensure there is a 1:1 mapping between the attribute value + * length and the number of blocks needed to store the attribute. This makes the + * verification of a buffer a little more complex, but greatly simplifies the + * allocation, reading and writing of these attributes as we don't have to guess + * the number of blocks needed to store the attribute data. + */ struct xfs_attr3_rmt_hdr { __be32 rm_magic; __be32 rm_offset; @@ -39,6 +47,8 @@ struct xfs_attr3_rmt_hdr { extern const struct xfs_buf_ops xfs_attr3_rmt_buf_ops; +int xfs_attr3_rmt_blocks(struct xfs_mount *mp, int attrlen); + int xfs_attr_rmtval_get(struct xfs_da_args *args); int xfs_attr_rmtval_set(struct xfs_da_args *args); int xfs_attr_rmtval_remove(struct xfs_da_args *args); diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 0d25542..1b2472a 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -513,6 +513,7 @@ _xfs_buf_find( xfs_alert(btp->bt_mount, "%s: Block out of range: block 0x%llx, EOFS 0x%llx ", __func__, blkno, eofs); + WARN_ON(1); return NULL; } -- cgit v1.1 From 2baad6121e2b2fa3428ee6cb2298107be11ab23a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:43:54 +0100 Subject: x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko Cc: Herbert Xu Cc: Huang Ying Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/crypto/crc32-pclmul_asm.S | 2 +- arch/x86/include/asm/inst.h | 74 ++++++++++++++++++++++++++++++++++++-- 2 files changed, 73 insertions(+), 3 deletions(-) diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S index 94c27df..f247304 100644 --- a/arch/x86/crypto/crc32-pclmul_asm.S +++ b/arch/x86/crypto/crc32-pclmul_asm.S @@ -240,7 +240,7 @@ fold_64: pand %xmm3, %xmm1 PCLMULQDQ 0x00, CONSTANT, %xmm1 pxor %xmm2, %xmm1 - pextrd $0x01, %xmm1, %eax + PEXTRD 0x01, %xmm1, %eax ret ENDPROC(crc32_pclmul_le_16) diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h index 280bf7f..3e11527 100644 --- a/arch/x86/include/asm/inst.h +++ b/arch/x86/include/asm/inst.h @@ -9,12 +9,68 @@ #define REG_NUM_INVALID 100 -#define REG_TYPE_R64 0 -#define REG_TYPE_XMM 1 +#define REG_TYPE_R32 0 +#define REG_TYPE_R64 1 +#define REG_TYPE_XMM 2 #define REG_TYPE_INVALID 100 + .macro R32_NUM opd r32 + \opd = REG_NUM_INVALID + .ifc \r32,%eax + \opd = 0 + .endif + .ifc \r32,%ecx + \opd = 1 + .endif + .ifc \r32,%edx + \opd = 2 + .endif + .ifc \r32,%ebx + \opd = 3 + .endif + .ifc \r32,%esp + \opd = 4 + .endif + .ifc \r32,%ebp + \opd = 5 + .endif + .ifc \r32,%esi + \opd = 6 + .endif + .ifc \r32,%edi + \opd = 7 + .endif +#ifdef CONFIG_X86_64 + .ifc \r32,%r8d + \opd = 8 + .endif + .ifc \r32,%r9d + \opd = 9 + .endif + .ifc \r32,%r10d + \opd = 10 + .endif + .ifc \r32,%r11d + \opd = 11 + .endif + .ifc \r32,%r12d + \opd = 12 + .endif + .ifc \r32,%r13d + \opd = 13 + .endif + .ifc \r32,%r14d + \opd = 14 + .endif + .ifc \r32,%r15d + \opd = 15 + .endif +#endif + .endm + .macro R64_NUM opd r64 \opd = REG_NUM_INVALID +#ifdef CONFIG_X86_64 .ifc \r64,%rax \opd = 0 .endif @@ -63,6 +119,7 @@ .ifc \r64,%r15 \opd = 15 .endif +#endif .endm .macro XMM_NUM opd xmm @@ -118,10 +175,13 @@ .endm .macro REG_TYPE type reg + R32_NUM reg_type_r32 \reg R64_NUM reg_type_r64 \reg XMM_NUM reg_type_xmm \reg .if reg_type_r64 <> REG_NUM_INVALID \type = REG_TYPE_R64 + .elseif reg_type_r32 <> REG_NUM_INVALID + \type = REG_TYPE_R32 .elseif reg_type_xmm <> REG_NUM_INVALID \type = REG_TYPE_XMM .else @@ -162,6 +222,16 @@ .byte \imm8 .endm + .macro PEXTRD imm8 xmm gpr + R32_NUM extrd_opd1 \gpr + XMM_NUM extrd_opd2 \xmm + PFX_OPD_SIZE + PFX_REX extrd_opd1 extrd_opd2 + .byte 0x0f, 0x3a, 0x16 + MODRM 0xc0 extrd_opd1 extrd_opd2 + .byte \imm8 + .endm + .macro AESKEYGENASSIST rcon xmm1 xmm2 XMM_NUM aeskeygen_opd1 \xmm1 XMM_NUM aeskeygen_opd2 \xmm2 -- cgit v1.1 From 5187b28ff08249ab8a162e802209ed04e271ca02 Mon Sep 17 00:00:00 2001 From: Pekka Riikonen Date: Mon, 13 May 2013 14:32:07 +0200 Subject: x86: Allow FPU to be used at interrupt time even with eagerfpu With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: v3.7+ Signed-off-by: H. Peter Anvin --- arch/x86/kernel/i387.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 245a71d..cb33909 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -22,23 +22,19 @@ /* * Were we in an interrupt that interrupted kernel mode? * - * For now, with eagerfpu we will return interrupted kernel FPU - * state as not-idle. TBD: Ideally we can change the return value - * to something like __thread_has_fpu(current). But we need to - * be careful of doing __thread_clear_has_fpu() before saving - * the FPU etc for supporting nested uses etc. For now, take - * the simple route! - * * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that * pair does nothing at all: the thread must not have fpu (so * that we don't try to save the FPU state), and TS must * be set (so that the clts/stts pair does nothing that is * visible in the interrupted kernel thread). + * + * Except for the eagerfpu case when we return 1 unless we've already + * been eager and saved the state in kernel_fpu_begin(). */ static inline bool interrupted_kernel_fpu_idle(void) { if (use_eager_fpu()) - return 0; + return __thread_has_fpu(current); return !__thread_has_fpu(current) && (read_cr0() & X86_CR0_TS); @@ -78,8 +74,8 @@ void __kernel_fpu_begin(void) struct task_struct *me = current; if (__thread_has_fpu(me)) { - __save_init_fpu(me); __thread_clear_has_fpu(me); + __save_init_fpu(me); /* We do 'stts()' in __kernel_fpu_end() */ } else if (!use_eager_fpu()) { this_cpu_write(fpu_owner_task, NULL); -- cgit v1.1 From 21363ca873334391992f2f424856aa864345bb61 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 29 May 2013 21:35:23 -0700 Subject: target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia Reported-by: Badari Pulavarty Tested-by: Badari Pulavarty Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 1b1d544..b11890d 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,6 +153,7 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; + fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev); /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -199,6 +200,7 @@ static int fd_configure_device(struct se_device *dev) goto fail; } + fd_dev->fd_block_size = FD_BLOCKSIZE; /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -217,9 +219,7 @@ static int fd_configure_device(struct se_device *dev) dev->dev_attrib.max_write_same_len = 0x1000; } - fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; - - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_block_size = fd_dev->fd_block_size; dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; @@ -694,11 +694,12 @@ static sector_t fd_get_blocks(struct se_device *dev) * to handle underlying block_device resize operations. */ if (S_ISBLK(i->i_mode)) - dev_size = (i_size_read(i) - fd_dev->fd_block_size); + dev_size = i_size_read(i); else dev_size = fd_dev->fd_dev_size; - return div_u64(dev_size, dev->dev_attrib.block_size); + return div_u64(dev_size - dev->dev_attrib.block_size, + dev->dev_attrib.block_size); } static struct sbc_ops fd_sbc_ops = { -- cgit v1.1 From cea4dcfdad926a27a18e188720efe0f2c9403456 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 23 May 2013 10:32:17 -0700 Subject: iscsi-target: fix heap buffer overflow on error If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 8 +++----- drivers/target/iscsi/iscsi_target_parameters.h | 4 +++- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index c2185fc..e382221 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -758,9 +758,9 @@ static int iscsi_add_notunderstood_response( } INIT_LIST_HEAD(&extra_response->er_list); - strncpy(extra_response->key, key, strlen(key) + 1); - strncpy(extra_response->value, NOTUNDERSTOOD, - strlen(NOTUNDERSTOOD) + 1); + strlcpy(extra_response->key, key, sizeof(extra_response->key)); + strlcpy(extra_response->value, NOTUNDERSTOOD, + sizeof(extra_response->value)); list_add_tail(&extra_response->er_list, ¶m_list->extra_response_list); @@ -1629,8 +1629,6 @@ int iscsi_decode_text_input( if (phase & PHASE_SECURITY) { if (iscsi_check_for_auth_key(key) > 0) { - char *tmpptr = key + strlen(key); - *tmpptr = '='; kfree(tmpbuf); return 1; } diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index 915b067..a47046a 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -1,8 +1,10 @@ #ifndef ISCSI_PARAMETERS_H #define ISCSI_PARAMETERS_H +#include + struct iscsi_extra_response { - char key[64]; + char key[KEY_MAXLEN]; char value[32]; struct list_head er_list; } ____cacheline_aligned; -- cgit v1.1 From d68c380590c390a488fe214e5ebf9439216ac3ba Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 May 2013 12:28:25 -0300 Subject: clk: mxs: Include clk mxs header file Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mike Turquette [mturquette@linaro.org: fixed $SUBJECT line] --- drivers/clk/mxs/clk-imx28.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index d0e5eed..4faf0af 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include -- cgit v1.1 From 970fa986fadb1165cf38b45b70e98302a3bee497 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 31 May 2013 12:45:09 +1000 Subject: drm/qxl: fix build warnings on 32-bit Just the usual printk related warnings. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_ioctl.c | 4 ++-- drivers/gpu/drm/qxl/qxl_kms.c | 9 +++++---- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 6db7370..a4b71b2 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -151,7 +151,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, struct qxl_bo *cmd_bo; int release_type; struct drm_qxl_command *commands = - (struct drm_qxl_command *)execbuffer->commands; + (struct drm_qxl_command *)(uintptr_t)execbuffer->commands; if (DRM_COPY_FROM_USER(&user_cmd, &commands[cmd_num], sizeof(user_cmd))) @@ -193,7 +193,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, for (i = 0 ; i < user_cmd.relocs_num; ++i) { if (DRM_COPY_FROM_USER(&reloc, - &((struct drm_qxl_reloc *)user_cmd.relocs)[i], + &((struct drm_qxl_reloc *)(uintptr_t)user_cmd.relocs)[i], sizeof(reloc))) { qxl_bo_list_unreserve(&reloc_list, true); qxl_release_unreserve(qdev, release); diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index 85127ed..e27ce2a 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -128,12 +128,13 @@ int qxl_device_init(struct qxl_device *qdev, qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0)); qdev->surface_mapping = io_mapping_create_wc(qdev->surfaceram_base, qdev->surfaceram_size); - DRM_DEBUG_KMS("qxl: vram %p-%p(%dM %dk), surface %p-%p(%dM %dk)\n", - (void *)qdev->vram_base, (void *)pci_resource_end(pdev, 0), + DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk)\n", + (unsigned long long)qdev->vram_base, + (unsigned long long)pci_resource_end(pdev, 0), (int)pci_resource_len(pdev, 0) / 1024 / 1024, (int)pci_resource_len(pdev, 0) / 1024, - (void *)qdev->surfaceram_base, - (void *)pci_resource_end(pdev, 1), + (unsigned long long)qdev->surfaceram_base, + (unsigned long long)pci_resource_end(pdev, 1), (int)qdev->surfaceram_size / 1024 / 1024, (int)qdev->surfaceram_size / 1024); -- cgit v1.1 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 28 +++++++++++++++------------- include/target/target_core_fabric.h | 2 +- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index bbca144..21e3158 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -65,7 +65,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd); static void transport_handle_queue_full(struct se_cmd *cmd, struct se_device *dev); static int transport_generic_get_mem(struct se_cmd *cmd); -static void transport_put_cmd(struct se_cmd *cmd); +static int transport_put_cmd(struct se_cmd *cmd); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -1944,7 +1944,7 @@ static inline void transport_free_pages(struct se_cmd *cmd) * This routine unconditionally frees a command, and reference counting * or list removal must be done in the caller. */ -static void transport_release_cmd(struct se_cmd *cmd) +static int transport_release_cmd(struct se_cmd *cmd) { BUG_ON(!cmd->se_tfo); @@ -1956,11 +1956,11 @@ static void transport_release_cmd(struct se_cmd *cmd) * If this cmd has been setup with target_get_sess_cmd(), drop * the kref and call ->release_cmd() in kref callback. */ - if (cmd->check_release != 0) { - target_put_sess_cmd(cmd->se_sess, cmd); - return; - } + if (cmd->check_release != 0) + return target_put_sess_cmd(cmd->se_sess, cmd); + cmd->se_tfo->release_cmd(cmd); + return 1; } /** @@ -1969,7 +1969,7 @@ static void transport_release_cmd(struct se_cmd *cmd) * * This routine releases our reference to the command and frees it if possible. */ -static void transport_put_cmd(struct se_cmd *cmd) +static int transport_put_cmd(struct se_cmd *cmd) { unsigned long flags; @@ -1977,7 +1977,7 @@ static void transport_put_cmd(struct se_cmd *cmd) if (atomic_read(&cmd->t_fe_count) && !atomic_dec_and_test(&cmd->t_fe_count)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; + return 0; } if (cmd->transport_state & CMD_T_DEV_ACTIVE) { @@ -1987,8 +1987,7 @@ static void transport_put_cmd(struct se_cmd *cmd) spin_unlock_irqrestore(&cmd->t_state_lock, flags); transport_free_pages(cmd); - transport_release_cmd(cmd); - return; + return transport_release_cmd(cmd); } void *transport_kmap_data_sg(struct se_cmd *cmd) @@ -2153,13 +2152,15 @@ static void transport_write_pending_qf(struct se_cmd *cmd) } } -void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) +int transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) { + int ret = 0; + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) { if (wait_for_tasks && (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) transport_wait_for_tasks(cmd); - transport_release_cmd(cmd); + ret = transport_release_cmd(cmd); } else { if (wait_for_tasks) transport_wait_for_tasks(cmd); @@ -2167,8 +2168,9 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (cmd->se_lun) transport_lun_remove_cmd(cmd); - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); } + return ret; } EXPORT_SYMBOL(transport_generic_free_cmd); diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d..1dcce9c 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v1.1 From aafc9d158b0039e600fc429246c7bb04a111fb26 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:49:41 -0700 Subject: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [] dump_stack+0x19/0x1f [ 257.360963] [] warn_slowpath_common+0x62/0x7b [ 257.367669] [] warn_slowpath_null+0x15/0x17 [ 257.374181] [] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [] ? __migrate_task+0x110/0x110 [ 257.471674] [] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [] ? wake_up_bit+0x25/0x25 [ 257.503652] [] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [] kthread+0xb0/0xb8 [ 257.518329] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [] ret_from_fork+0x7c/0xb0 [ 257.532133] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 12 ++++---- drivers/target/iscsi/iscsi_target_erl2.c | 12 ++++---- drivers/target/iscsi/iscsi_target_util.c | 50 +++++++++++++++++++++++--------- drivers/target/iscsi/iscsi_target_util.h | 2 +- 4 files changed, 50 insertions(+), 26 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 262ef1f..d7705e5 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -651,7 +651,7 @@ static int iscsit_add_reject( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -697,7 +697,7 @@ int iscsit_add_reject_from_cmd( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -1743,7 +1743,7 @@ int iscsit_handle_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd, return 0; out: if (cmd) - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); ping_out: kfree(ping_data); return ret; @@ -2251,7 +2251,7 @@ iscsit_handle_logout_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, if (conn->conn_state != TARG_CONN_STATE_LOGGED_IN) { pr_err("Received logout request on connection that" " is not in logged in state, ignoring request.\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return 0; } @@ -3665,7 +3665,7 @@ iscsit_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, false); break; case ISTATE_SEND_NOPIN_WANT_RESPONSE: iscsit_mod_nopin_response_timer(conn); @@ -4122,7 +4122,7 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) iscsit_increment_maxcmdsn(cmd, sess); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c index ba6091b..45a5afd 100644 --- a/drivers/target/iscsi/iscsi_target_erl2.c +++ b/drivers/target/iscsi/iscsi_target_erl2.c @@ -143,7 +143,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -165,7 +165,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -248,7 +248,7 @@ void iscsit_discard_cr_cmds_by_expstatsn( iscsit_remove_cmd_from_connection_recovery(cmd, sess); spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -302,7 +302,7 @@ int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } spin_unlock_bh(&conn->cmd_lock); @@ -355,7 +355,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } @@ -375,7 +375,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) { list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index 2cc6c9a..08a3bac 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -676,40 +676,56 @@ void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) void iscsit_release_cmd(struct iscsi_cmd *cmd) { - struct iscsi_conn *conn = cmd->conn; - - iscsit_free_r2ts_from_list(cmd); - iscsit_free_all_datain_reqs(cmd); - kfree(cmd->buf_ptr); kfree(cmd->pdu_list); kfree(cmd->seq_list); kfree(cmd->tmr_req); kfree(cmd->iov_data); - if (conn) { + kmem_cache_free(lio_cmd_cache, cmd); +} + +static void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd, + bool check_queues) +{ + struct iscsi_conn *conn = cmd->conn; + + if (scsi_cmd) { + if (cmd->data_direction == DMA_TO_DEVICE) { + iscsit_stop_dataout_timer(cmd); + iscsit_free_r2ts_from_list(cmd); + } + if (cmd->data_direction == DMA_FROM_DEVICE) + iscsit_free_all_datain_reqs(cmd); + } + + if (conn && check_queues) { iscsit_remove_cmd_from_immediate_queue(cmd, conn); iscsit_remove_cmd_from_response_queue(cmd, conn); } - - kmem_cache_free(lio_cmd_cache, cmd); } -void iscsit_free_cmd(struct iscsi_cmd *cmd) +void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) { + struct se_cmd *se_cmd = NULL; + int rc; /* * Determine if a struct se_cmd is associated with * this struct iscsi_cmd. */ switch (cmd->iscsi_opcode) { case ISCSI_OP_SCSI_CMD: - if (cmd->data_direction == DMA_TO_DEVICE) - iscsit_stop_dataout_timer(cmd); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); /* * Fallthrough */ case ISCSI_OP_SCSI_TMFUNC: - transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; case ISCSI_OP_REJECT: /* @@ -718,11 +734,19 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) * associated cmd->se_cmd needs to be released. */ if (cmd->se_cmd.se_tfo != NULL) { - transport_generic_free_cmd(&cmd->se_cmd, 1); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); + + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; } /* Fall-through */ default: + __iscsit_free_cmd(cmd, false, shutdown); cmd->release_cmd(cmd); break; } diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 4f8e01a..a442265 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -29,7 +29,7 @@ extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_co extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); -extern void iscsit_free_cmd(struct iscsi_cmd *); +extern void iscsit_free_cmd(struct iscsi_cmd *, bool); extern int iscsit_check_session_usage_count(struct iscsi_session *); extern void iscsit_dec_session_usage_count(struct iscsi_session *); extern void iscsit_inc_session_usage_count(struct iscsi_session *); -- cgit v1.1 From 381cc2b9705512ee7c7f1839cbdde374625a2a9f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 24 May 2013 12:02:35 +0100 Subject: arm64: treat unhandled compat el0 traps as undef Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index c7e0470..1d13142 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -390,6 +390,16 @@ el0_sync_compat: b.eq el0_fpsimd_exc cmp x24, #ESR_EL1_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_32 // CP15 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_64 // CP15 MRRC/MCRR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_MR // CP14 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_LS // CP14 LDC/STC trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_64 // CP14 MRRC/MCRR trap + b.eq el0_undef cmp x24, #ESR_EL1_EC_BREAKPT_EL0 // debug exception in EL0 b.ge el0_dbg b el0_inv -- cgit v1.1 From 9955ac47f4ba1c95ecb6092aeaefb40a22e99268 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 28 May 2013 15:54:15 +0100 Subject: arm64: don't kill the kernel on a bad esr from el0 Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org --- arch/arm64/kernel/traps.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index f1ff9ba..f30852d 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -311,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) */ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) { + siginfo_t info; + void __user *pc = (void __user *)instruction_pointer(regs); console_verbose(); pr_crit("Bad mode in %s handler detected, code 0x%08x\n", handler[reason], esr); + __show_regs(regs); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_ILLOPC; + info.si_addr = pc; - die("Oops - bad mode", regs, 0); - local_irq_disable(); - panic("bad mode"); + arm64_notify_die("Oops - bad mode", regs, &info, 0); } void __pte_error(const char *file, int line, unsigned long val) -- cgit v1.1 From 5d477b6079619910dab882fa229cce1f14f86cf8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 May 2013 14:04:11 +0200 Subject: vfs: Fix invalid ida_remove() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez Signed-off-by: Takashi Iwai Signed-off-by: Al Viro --- fs/pnode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/pnode.c b/fs/pnode.c index 3d2a714..9af0df1 100644 --- a/fs/pnode.c +++ b/fs/pnode.c @@ -83,7 +83,8 @@ static int do_make_slave(struct mount *mnt) if (peer_mnt == mnt) peer_mnt = NULL; } - if (IS_MNT_SHARED(mnt) && list_empty(&mnt->mnt_share)) + if (mnt->mnt_group_id && IS_MNT_SHARED(mnt) && + list_empty(&mnt->mnt_share)) mnt_release_group_id(mnt); list_del_init(&mnt->mnt_share); -- cgit v1.1 From 801d9d26bfd6e88e9cf0efbb30b649d1bdc15dcf Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:26:53 +0100 Subject: fix buffer leak after "scsi: saner replacements for ->proc_info()" That patch failed to set proc_scsi_fops' .release method. Signed-off-by: Jan Beulich Signed-off-by: Al Viro --- drivers/scsi/scsi_proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index db66357..86f0c5d 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -84,6 +84,7 @@ static int proc_scsi_host_open(struct inode *inode, struct file *file) static const struct file_operations proc_scsi_fops = { .open = proc_scsi_host_open, + .release = single_release, .read = seq_read, .llseek = seq_lseek, .write = proc_scsi_host_write -- cgit v1.1 From 1d7095c72d35eee4ebc28e66563e636b9adafeb2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 May 2013 15:21:56 -0400 Subject: qnx6: qnx6_readdir() has a braino in pos calculation We want to mask lower 5 bits out, not leave only those and clear the rest... As it is, we end up always starting to read from the beginning of directory, no matter what the current position had been. Signed-off-by: Al Viro --- fs/qnx6/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/qnx6/dir.c b/fs/qnx6/dir.c index 8798d06..afa6be6 100644 --- a/fs/qnx6/dir.c +++ b/fs/qnx6/dir.c @@ -120,7 +120,7 @@ static int qnx6_readdir(struct file *filp, void *dirent, filldir_t filldir) struct inode *inode = file_inode(filp); struct super_block *s = inode->i_sb; struct qnx6_sb_info *sbi = QNX6_SB(s); - loff_t pos = filp->f_pos & (QNX6_DIR_ENTRY_SIZE - 1); + loff_t pos = filp->f_pos & ~(QNX6_DIR_ENTRY_SIZE - 1); unsigned long npages = dir_pages(inode); unsigned long n = pos >> PAGE_CACHE_SHIFT; unsigned start = (pos & ~PAGE_CACHE_MASK) / QNX6_DIR_ENTRY_SIZE; -- cgit v1.1 From 31abdab9c11bb1694ecd1476a7edbe8e964d94ac Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 May 2013 02:38:52 -0400 Subject: hpfs: deadlock and race in directory lseek() For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex in hpfs_dir_lseek() - there's a lot of methods that grab the former with the caller already holding the latter, so it must take i_mutex first. For another, locking the damn thing, carefully validating the offset, then dropping locks and assigning the offset is obviously racy. Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c won't modify the sucker on B-tree surgeries. Signed-off-by: Al Viro --- fs/hpfs/dir.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c index 546f6d3..834ac13 100644 --- a/fs/hpfs/dir.c +++ b/fs/hpfs/dir.c @@ -33,25 +33,27 @@ static loff_t hpfs_dir_lseek(struct file *filp, loff_t off, int whence) if (whence == SEEK_DATA || whence == SEEK_HOLE) return -EINVAL; + mutex_lock(&i->i_mutex); hpfs_lock(s); /*printk("dir lseek\n");*/ if (new_off == 0 || new_off == 1 || new_off == 11 || new_off == 12 || new_off == 13) goto ok; - mutex_lock(&i->i_mutex); pos = ((loff_t) hpfs_de_as_down_as_possible(s, hpfs_inode->i_dno) << 4) + 1; while (pos != new_off) { if (map_pos_dirent(i, &pos, &qbh)) hpfs_brelse4(&qbh); else goto fail; if (pos == 12) goto fail; } - mutex_unlock(&i->i_mutex); + hpfs_add_pos(i, &filp->f_pos); ok: + filp->f_pos = new_off; hpfs_unlock(s); - return filp->f_pos = new_off; -fail: mutex_unlock(&i->i_mutex); + return new_off; +fail: /*printk("illegal lseek: %016llx\n", new_off);*/ hpfs_unlock(s); + mutex_unlock(&i->i_mutex); return -ESPIPE; } -- cgit v1.1 From 448293aadb54ab38b9c053bf9f1eecafdc0ed214 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 22 May 2013 13:41:26 -0400 Subject: befs_readdir(): do not increment ->f_pos if filldir tells us to stop Signed-off-by: Al Viro --- fs/befs/linuxvfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 8615ee8..f95dddc 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -265,8 +265,8 @@ befs_readdir(struct file *filp, void *dirent, filldir_t filldir) result = filldir(dirent, keybuf, keysize, filp->f_pos, (ino_t) value, d_type); } - - filp->f_pos++; + if (!result) + filp->f_pos++; befs_debug(sb, "<--- befs_readdir() filp->f_pos %Ld", filp->f_pos); -- cgit v1.1 From 65ac057bce426b4abdf42384c4e09e40a634df32 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 14:28:38 +0000 Subject: trivial: atmel_lcdfb: add missing error message When a too small framebuffer is given, the atmel_lcdfb_check_var silently fails. Adding an error message will save some head scratching. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 540909d..6e6491f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -461,8 +461,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, if (info->fix.smem_len) { unsigned int smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); - if (smem_len > info->fix.smem_len) + if (smem_len > info->fix.smem_len) { + dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", + info->fix.smem_len, smem_len); return -EINVAL; + } } /* Saturate vertical and horizontal timings at maximum values */ -- cgit v1.1 From 56c21b53ab071feb3ce93375a563ead745fa7105 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 15:49:35 +0000 Subject: atmel_lcdfb: blank the backlight on remove When removing atmel_lcdfb module, the backlight is unregistered but not blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case). This can result in the screen going full white depending on how the PWM is wired. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 6e6491f..effdb37 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -223,8 +223,14 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) static void exit_backlight(struct atmel_lcdfb_info *sinfo) { - if (sinfo->backlight) - backlight_device_unregister(sinfo->backlight); + if (!sinfo->backlight) + return; + + if (sinfo->backlight->ops) { + sinfo->backlight->props.power = FB_BLANK_POWERDOWN; + sinfo->backlight->ops->update_status(sinfo->backlight); + } + backlight_device_unregister(sinfo->backlight); } #else -- cgit v1.1 From 4ad1f70ebcdb69393ce083f514bf4a4a3a3e65cb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 23 May 2013 04:38:22 -0400 Subject: zoran: racy refcount handling in vm_ops ->open()/->close() worse, we lock ->resource_lock too late when we are destroying the final clonal VMA; the check for lack of other mappings of the same opened file can race with mmap(). Signed-off-by: Al Viro --- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/pci/zoran/zoran_driver.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h index ca2754a..5e04008 100644 --- a/drivers/media/pci/zoran/zoran.h +++ b/drivers/media/pci/zoran/zoran.h @@ -176,7 +176,7 @@ struct zoran_fh; struct zoran_mapping { struct zoran_fh *fh; - int count; + atomic_t count; }; struct zoran_buffer { diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c index 1168a84..d133c30 100644 --- a/drivers/media/pci/zoran/zoran_driver.c +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -2803,8 +2803,7 @@ static void zoran_vm_open (struct vm_area_struct *vma) { struct zoran_mapping *map = vma->vm_private_data; - - map->count++; + atomic_inc(&map->count); } static void @@ -2815,7 +2814,7 @@ zoran_vm_close (struct vm_area_struct *vma) struct zoran *zr = fh->zr; int i; - if (--map->count > 0) + if (!atomic_dec_and_mutex_lock(&map->count, &zr->resource_lock)) return; dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr), @@ -2828,14 +2827,16 @@ zoran_vm_close (struct vm_area_struct *vma) kfree(map); /* Any buffers still mapped? */ - for (i = 0; i < fh->buffers.num_buffers; i++) - if (fh->buffers.buffer[i].map) + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map) { + mutex_unlock(&zr->resource_lock); return; + } + } dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode)); - mutex_lock(&zr->resource_lock); if (fh->map_mode == ZORAN_MAP_MODE_RAW) { if (fh->buffers.active != ZORAN_FREE) { @@ -2939,7 +2940,7 @@ zoran_mmap (struct file *file, goto mmap_unlock_and_return; } map->fh = fh; - map->count = 1; + atomic_set(&map->count, 1); vma->vm_ops = &zoran_vm_ops; vma->vm_flags |= VM_DONTEXPAND; -- cgit v1.1 From 0bdc7acba56a7ca4232f15f37b16f7ec079385ab Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:07:52 -0400 Subject: reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry After sleeping for filldir(), we check to see if the file system has changed and research. The next_pos pointer is updated but its value isn't pushed into the key used for the search itself. As a result, the search returns the same item that the last cycle of the loop did and filldir() is called multiple times with the same data. The end result is that the buffer can contain the same name multiple times. This can be returned to userspace or used internally in the xattr code where it can manifest with the following warning: jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) reiserfs_for_each_xattr uses reiserfs_readdir_dentry to iterate over the xattr names and ends up trying to unlink the same name twice. The second attempt fails with -ENOENT and the error is returned. At some point I'll need to add support into reiserfsck to remove the orphaned directories left behind when this occurs. The fix is to push the value into the key before researching. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 66c53b6..6c2d136 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -204,6 +204,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, next_pos = deh_offset(deh) + 1; if (item_moved(&tmp_ih, &path_to_entry)) { + set_cpu_key_k_offset(&pos_key, + next_pos); goto research; } } /* for */ -- cgit v1.1 From 4a8570112b76a63ad21cfcbe2783f98f7fd5ba1b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:54:17 -0400 Subject: reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs_chown_xattrs() takes the iattr struct passed into ->setattr and uses it to iterate over all the attrs associated with a file to change ownership of xattrs (and transfer quota associated with the xattr files). When the setuid bit is cleared during chown, ATTR_MODE and iattr->ia_mode are passed to all the xattrs as well. This means that the xattr directory will have S_IFREG added to its mode bits. This has been prevented in practice by a missing IS_PRIVATE check in reiserfs_acl_chmod, which caused a double-lock to occur while holding the write lock. Since the file system was completely locked up, the writeout of the corrupted mode never happened. This patch temporarily clears everything but ATTR_UID|ATTR_GID for the calls to reiserfs_setattr and adds the missing IS_PRIVATE check. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/xattr.c | 14 +++++++++++++- fs/reiserfs/xattr_acl.c | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4cce1d9..821bcf7 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -318,7 +318,19 @@ static int delete_one_xattr(struct dentry *dentry, void *data) static int chown_one_xattr(struct dentry *dentry, void *data) { struct iattr *attrs = data; - return reiserfs_setattr(dentry, attrs); + int ia_valid = attrs->ia_valid; + int err; + + /* + * We only want the ownership bits. Otherwise, we'll do + * things like change a directory to a regular file if + * ATTR_MODE is set. + */ + attrs->ia_valid &= (ATTR_UID|ATTR_GID); + err = reiserfs_setattr(dentry, attrs); + attrs->ia_valid = ia_valid; + + return err; } /* No i_mutex, but the inode is unconnected. */ diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index d7c01ef..6c8767f 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -443,6 +443,9 @@ int reiserfs_acl_chmod(struct inode *inode) int depth; int error; + if (IS_PRIVATE(inode)) + return 0; + if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; -- cgit v1.1 From a1457c0ce976bad1356b9b0437f2a5c3ab8a9cfc Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:51:17 -0400 Subject: reiserfs: fix deadlock with nfs racing on create/lookup Reiserfs is currently able to be deadlocked by having two NFS clients where one has removed and recreated a file and another is accessing the file with an open file handle. If one client deletes and recreates a file with timing such that the recreated file obtains the same [dirid, objectid] pair as the original file while another client accesses the file via file handle, the create and lookup can race and deadlock if the lookup manages to create the in-memory inode first. The create thread, in insert_inode_locked4, will hold the write lock while waiting on the other inode to be unlocked. The lookup thread, anywhere in the iget path, will release and reacquire the write lock while it schedules. If it needs to reacquire the lock while the create thread has it, it will never be able to make forward progress because it needs to reacquire the lock before ultimately unlocking the inode. This patch drops the write lock across the insert_inode_locked4 call so that the ordering of inode_wait -> write lock is retained. Since this would have been the case before the BKL push-down, this is safe. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 77d6d47..f844533 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1811,11 +1811,16 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, TYPE_STAT_DATA, SD_SIZE, MAX_US_INT); memcpy(INODE_PKEY(inode), &(ih.ih_key), KEY_SIZE); args.dirid = le32_to_cpu(ih.ih_key.k_dir_id); - if (insert_inode_locked4(inode, args.objectid, - reiserfs_find_actor, &args) < 0) { + + reiserfs_write_unlock(inode->i_sb); + err = insert_inode_locked4(inode, args.objectid, + reiserfs_find_actor, &args); + reiserfs_write_lock(inode->i_sb); + if (err) { err = -EINVAL; goto out_bad_inode; } + if (old_format_only(sb)) /* not a perfect generation count, as object ids can be reused, but ** this is as good as reiserfs can do right now. -- cgit v1.1 From 35f7097fcedec63fcba1852dbee96f74a2d90878 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:37 +0000 Subject: powerpc/tm: Make room for hypervisor in abort cause codes PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a613651..8f6a94b 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -113,14 +113,15 @@ /* Reason codes describing kernel causes for transaction aborts. By convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. + the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. */ -#define TM_CAUSE_RESCHED 0xfe -#define TM_CAUSE_TLBI 0xfc -#define TM_CAUSE_FAC_UNAV 0xfa -#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */ -#define TM_CAUSE_MISC 0xf6 -#define TM_CAUSE_SIGNAL 0xf4 +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF -- cgit v1.1 From 24b92375dc4ec8a15262e8aaaab60b7404d4b1e7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:38 +0000 Subject: powerpc/tm: Update cause codes documentation Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c907be4..84e04a0 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -155,6 +155,7 @@ These are defined in , and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_TLBI Software TLB invalide. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. -- cgit v1.1 From 6ce6c629fd8254b3177650de99699682ff7f6707 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:39 +0000 Subject: powerpc/tm: Abort on emulation and alignment faults If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 7 +++++-- arch/powerpc/include/asm/reg.h | 2 ++ arch/powerpc/kernel/traps.c | 29 ++++++++++++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index 84e04a0..c54bf31 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -161,9 +161,12 @@ kernel aborted a transaction: transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. + TM_CAUSE_ALIGNMENT Alignment fault. + TM_CAUSE_EMULATE Emulation that touched memory. -These can be checked by the user program's abort handler as TEXASR[0:7]. - +These can be checked by the user program's abort handler as TEXASR[0:7]. If +bit 7 is set, it indicates that the error is consider persistent. For example +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q GDB === diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 8f6a94b..d0528e0 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -122,6 +122,8 @@ #define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a7a648f..f18c79c 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -53,6 +53,7 @@ #ifdef CONFIG_PPC64 #include #include +#include #endif #include #include @@ -932,6 +933,28 @@ static int emulate_isel(struct pt_regs *regs, u32 instword) return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline bool tm_abort_check(struct pt_regs *regs, int cause) +{ + /* If we're emulating a load/store in an active transaction, we cannot + * emulate it as the kernel operates in transaction suspended context. + * We need to abort the transaction. This creates a persistent TM + * abort so tell the user what caused it with a new code. + */ + if (MSR_TM_TRANSACTIONAL(regs->msr)) { + tm_enable(); + tm_abort(cause); + return true; + } + return false; +} +#else +static inline bool tm_abort_check(struct pt_regs *regs, int reason) +{ + return false; +} +#endif + static int emulate_instruction(struct pt_regs *regs) { u32 instword; @@ -971,6 +994,9 @@ static int emulate_instruction(struct pt_regs *regs) /* Emulate load/store string insn. */ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) { + if (tm_abort_check(regs, + TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT)) + return -EINVAL; PPC_WARN_EMULATED(string, regs); return emulate_string_inst(regs, instword); } @@ -1148,6 +1174,9 @@ void alignment_exception(struct pt_regs *regs) if (!arch_irq_disabled_regs(regs)) local_irq_enable(); + if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT)) + goto bail; + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); -- cgit v1.1 From b75c100ef24894bd2c8b52e123bcc5f191c5d9fd Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:30:56 +0000 Subject: powerpc/tm: Move TM abort cause codes to uapi These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 14 -------------- arch/powerpc/include/asm/tm.h | 2 ++ arch/powerpc/include/uapi/asm/Kbuild | 1 + arch/powerpc/include/uapi/asm/tm.h | 18 ++++++++++++++++++ 4 files changed, 21 insertions(+), 14 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/tm.h diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d0528e0..4a9e408 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -111,20 +111,6 @@ #define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) #define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) -/* Reason codes describing kernel causes for transaction aborts. By - convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. -*/ -#define TM_CAUSE_PERSISTENT 0x01 -#define TM_CAUSE_RESCHED 0xde -#define TM_CAUSE_TLBI 0xdc -#define TM_CAUSE_FAC_UNAV 0xda -#define TM_CAUSE_SYSCALL 0xd8 /* future use */ -#define TM_CAUSE_MISC 0xd6 /* future use */ -#define TM_CAUSE_SIGNAL 0xd4 -#define TM_CAUSE_ALIGNMENT 0xd2 -#define TM_CAUSE_EMULATE 0xd0 - #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h index 4b4449a..9dfbc34 100644 --- a/arch/powerpc/include/asm/tm.h +++ b/arch/powerpc/include/asm/tm.h @@ -5,6 +5,8 @@ * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. */ +#include + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM extern void do_load_up_transact_fpu(struct thread_struct *thread); extern void do_load_up_transact_altivec(struct thread_struct *thread); diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild index f7bca63..5182c86 100644 --- a/arch/powerpc/include/uapi/asm/Kbuild +++ b/arch/powerpc/include/uapi/asm/Kbuild @@ -40,6 +40,7 @@ header-y += statfs.h header-y += swab.h header-y += termbits.h header-y += termios.h +header-y += tm.h header-y += types.h header-y += ucontext.h header-y += unistd.h diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h new file mode 100644 index 0000000..85059a0 --- /dev/null +++ b/arch/powerpc/include/uapi/asm/tm.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_TM_H +#define _ASM_POWERPC_TM_H + +/* Reason codes describing kernel causes for transaction aborts. By + * convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if + * the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. + */ +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 + +#endif -- cgit v1.1 From 2b3f8e87cf99a33fb6faf5026d7147748bbd77b6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:41 +0000 Subject: powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 19 ++++++++++++ arch/powerpc/include/asm/processor.h | 13 +++------ arch/powerpc/include/asm/signal.h | 3 ++ arch/powerpc/kernel/signal.c | 40 ++++++++++++++++++++++++-- arch/powerpc/kernel/signal.h | 2 +- arch/powerpc/kernel/signal_32.c | 10 ++----- arch/powerpc/kernel/signal_64.c | 23 +++++---------- 7 files changed, 74 insertions(+), 36 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c54bf31..dc23e58 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -147,6 +147,25 @@ Example signal handler: fix_the_problem(ucp->dar); } +When in an active transaction that takes a signal, we need to be careful with +the stack. It's possible that the stack has moved back up after the tbegin. +The obvious case here is when the tbegin is called inside a function that +returns before a tend. In this case, the stack is part of the checkpointed +transactional memory state. If we write over this non transactionally or in +suspend, we are in trouble because if we get a tm abort, the program counter and +stack pointer will be back at the tbegin but our in memory stack won't be valid +anymore. + +To avoid this, when taking a signal in an active transaction, we need to use +the stack pointer from the checkpointed state, rather than the speculated +state. This ensures that the signal context (written tm suspended) will be +written below the stack required for the rollback. The transaction is aborted +becuase of the treclaim, so any memory written between the tbegin and the +signal will be rolled back anyway. + +For signals taken in non-TM or suspended mode, we use the +normal/non-checkpointed stack pointer. + Failure cause codes used by kernel ================================== diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 594db6b..14a6583 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -409,21 +409,16 @@ static inline void prefetchw(const void *x) #endif #ifdef CONFIG_PPC64 -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - unsigned long sp; - if (is_32) - sp = regs->gpr[1] & 0x0ffffffffUL; - else - sp = regs->gpr[1]; - + return sp & 0x0ffffffffUL; return sp; } #else -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - return regs->gpr[1]; + return sp; } #endif diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h index fbe66c4..9322c28 100644 --- a/arch/powerpc/include/asm/signal.h +++ b/arch/powerpc/include/asm/signal.h @@ -3,5 +3,8 @@ #define __ARCH_HAS_SA_RESTORER #include +#include + +extern unsigned long get_tm_stackpointer(struct pt_regs *regs); #endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 577a8aa..457e97a 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "signal.h" @@ -30,13 +31,13 @@ int show_unhandled_signals = 1; /* * Allocate space for the signal frame */ -void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32) { unsigned long oldsp, newsp; /* Default to using normal stack */ - oldsp = get_clean_sp(regs, is_32); + oldsp = get_clean_sp(sp, is_32); /* Check for alt stack */ if ((ka->sa.sa_flags & SA_ONSTACK) && @@ -175,3 +176,38 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) user_enter(); } + +unsigned long get_tm_stackpointer(struct pt_regs *regs) +{ + /* When in an active transaction that takes a signal, we need to be + * careful with the stack. It's possible that the stack has moved back + * up after the tbegin. The obvious case here is when the tbegin is + * called inside a function that returns before a tend. In this case, + * the stack is part of the checkpointed transactional memory state. + * If we write over this non transactionally or in suspend, we are in + * trouble because if we get a tm abort, the program counter and stack + * pointer will be back at the tbegin but our in memory stack won't be + * valid anymore. + * + * To avoid this, when taking a signal in an active transaction, we + * need to use the stack pointer from the checkpointed state, rather + * than the speculated state. This ensures that the signal context + * (written tm suspended) will be written below the stack required for + * the rollback. The transaction is aborted becuase of the treclaim, + * so any memory written between the tbegin and the signal will be + * rolled back anyway. + * + * For signals taken in non-TM or suspended mode, we use the + * normal/non-checkpointed stack pointer. + */ + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + tm_enable(); + tm_reclaim(¤t->thread, regs->msr, TM_CAUSE_SIGNAL); + if (MSR_TM_TRANSACTIONAL(regs->msr)) + return current->thread.ckpt_regs.gpr[1]; + } +#endif + return regs->gpr[1]; +} diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index ec84c90..c69b9ae 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); -extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +extern void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32); extern int handle_signal32(unsigned long sig, struct k_sigaction *ka, diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 95068bf..201385c 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -503,12 +503,6 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr; - /* tm_reclaim rolls back all reg states, updating thread.ckpt_regs, - * thread.transact_fpr[], thread.transact_vr[], etc. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -965,7 +959,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* Set up Signal Frame */ /* Put a Real Time Context onto stack */ - rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1); + rt_sf = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*rt_sf), 1); addr = rt_sf; if (unlikely(rt_sf == NULL)) goto badframe; @@ -1403,7 +1397,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, unsigned long tramp; /* Set up Signal Frame */ - frame = get_sigframe(ka, regs, sizeof(*frame), 1); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 1); if (unlikely(frame == NULL)) goto badframe; sc = (struct sigcontext __user *) &frame->sctx; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index c179428..3459473 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -154,11 +154,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * As above, but Transactional Memory is in use, so deliver sigcontexts * containing checkpointed and transactional register states. * - * To do this, we treclaim to gather both sets of registers and set up the - * 'normal' sigcontext registers with rolled-back register values such that a - * simple signal handler sees a correct checkpointed register state. - * If interested, a TM-aware sighandler can examine the transactional registers - * in the 2nd sigcontext to determine the real origin of the signal. + * To do this, we treclaim (done before entering here) to gather both sets of + * registers and set up the 'normal' sigcontext registers with rolled-back + * register values such that a simple signal handler sees a correct + * checkpointed register state. If interested, a TM-aware sighandler can + * examine the transactional registers in the 2nd sigcontext to determine the + * real origin of the signal. */ static long setup_tm_sigcontexts(struct sigcontext __user *sc, struct sigcontext __user *tm_sc, @@ -184,16 +185,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, BUG_ON(!MSR_TM_ACTIVE(regs->msr)); - /* tm_reclaim rolls back all reg states, saving checkpointed (older) - * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) - * thread.transact_fp and/or VRs to (newer) thread.transact_vr. - * THEN we save out FP/VRs, if necessary, to the checkpointed (older) - * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the - * stack, in *regs. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - flush_fp_to_thread(current); #ifdef CONFIG_ALTIVEC @@ -711,7 +702,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, unsigned long newsp = 0; long err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame), 0); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); if (unlikely(frame == NULL)) goto badframe; -- cgit v1.1 From e242114afff0a41550e174cd787cdbafd34625de Mon Sep 17 00:00:00 2001 From: chenhui zhao Date: Mon, 27 May 2013 21:59:43 +0000 Subject: powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0a13ecb..3cc2f91 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS -#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU)) +#define distribute_irqs (1) #else #define distribute_irqs (0) #endif @@ -1703,7 +1703,7 @@ void mpic_setup_this_cpu(void) * it differently, then we should make sure we also change the default * values of irq_desc[].affinity in irq.c. */ - if (distribute_irqs) { + if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) { for (i = 0; i < mpic->num_sources ; i++) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); -- cgit v1.1 From 2ac6f427ad837a69561160b282eff80d9f0c2466 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 28 May 2013 10:39:50 +0000 Subject: powerpc/cputable: Fix oprofile_cpu_type on power8 Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c60bbec..b8808bc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -453,7 +453,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_cpu_type = 0, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,7 +506,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power8", + .oprofile_cpu_type = 0, .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, -- cgit v1.1 From a515348fc69fd1d9e8ebd34a16f1026d7fe32048 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:27 +0000 Subject: powerpc/pseries: Kill all prefetch streams on context switch On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc_asm.h | 11 +++++++++++ arch/powerpc/kernel/entry_64.S | 7 +++++++ 2 files changed, 18 insertions(+) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index cea8496..2f1b6c5 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -523,6 +523,17 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946) #define PPC440EP_ERR42 #endif +/* The following stops all load and store data streams associated with stream + * ID (ie. streams created explicitly). The embedded and server mnemonics for + * dcbt are different so we use machine "power4" here explicitly. + */ +#define DCBT_STOP_ALL_STREAM_IDS(scratch) \ +.machine push ; \ +.machine "power4" ; \ + lis scratch,0x60000000@h; \ + dcbt r0,scratch,0b01010; \ +.machine pop + /* * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them * keep the address intact to be compatible with code shared with diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 0e9095e..246b11c 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -501,6 +501,13 @@ BEGIN_FTR_SECTION ldarx r6,0,r1 END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) +#ifdef CONFIG_PPC_BOOK3S +/* Cancel all explict user streams as they will have no use after context + * switch and will stop the HW from creating streams itself + */ + DCBT_STOP_ALL_STREAM_IDS(r6) +#endif + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ -- cgit v1.1 From 280a5ba22ca35575721d42e536176a3561f4ec43 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:29 +0000 Subject: powerpc/pseries: Improve stream generation comments in copypage/user No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copypage_power7.S | 19 +++++++++++-------- arch/powerpc/lib/copyuser_power7.S | 12 +++++++----- 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S index 0ef75bf..395c594 100644 --- a/arch/powerpc/lib/copypage_power7.S +++ b/arch/powerpc/lib/copypage_power7.S @@ -28,13 +28,14 @@ _GLOBAL(copypage_power7) * aligned we don't need to clear the bottom 7 bits of either * address. */ - ori r9,r3,1 /* stream=1 */ + ori r9,r3,1 /* stream=1 => to */ #ifdef CONFIG_PPC_64K_PAGES - lis r7,0x0E01 /* depth=7, units=512 */ + lis r7,0x0E01 /* depth=7 + * units/cachelines=512 */ #else lis r7,0x0E00 /* depth=7 */ - ori r7,r7,0x1000 /* units=32 */ + ori r7,r7,0x1000 /* units/cachelines=32 */ #endif ori r10,r7,1 /* stream=1 */ @@ -43,12 +44,14 @@ _GLOBAL(copypage_power7) .machine push .machine "power4" - dcbt r0,r4,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r4,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 0d24ff1..d1f1179 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -318,12 +318,14 @@ err1; stb r0,0(r3) .machine push .machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r6,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop beq cr1,.Lunwind_stack_nonvmx_copy -- cgit v1.1 From 0608d692463598c1d6e826d9dd7283381b4f246c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 31 May 2013 01:03:24 +0000 Subject: powerpc/mm: Always invalidate tlb on hpte invalidate and update If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_native_64.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 6a2aead..4c122c3 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -336,11 +336,18 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { - native_unlock_hpte(hptep); - return -1; + actual_psize = psize; + ret = -1; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) { DBG_LOW(" -> miss\n"); ret = -1; @@ -350,6 +357,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | (newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C)); } +err_out: native_unlock_hpte(hptep); /* Ensure it is out of the tlb too. */ @@ -409,7 +417,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, hptep = htab_address + slot; actual_psize = hpte_actual_psize(hptep, psize); if (actual_psize < 0) - return; + actual_psize = psize; /* Update the HPTE */ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | @@ -437,21 +445,27 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { + actual_psize = psize; native_unlock_hpte(hptep); - local_irq_restore(flags); - return; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) native_unlock_hpte(hptep); else /* Invalidate the hpte. NOTE: this also unlocks it */ hptep->v = 0; +err_out: /* Invalidate the TLB */ tlbie(vpn, psize, actual_psize, ssize, local); - local_irq_restore(flags); } -- cgit v1.1 From f7b3367774f92a688d39ed767f0ae9b93af7873a Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Fri, 31 May 2013 01:20:02 +0000 Subject: powerpc/32bit:Store temporary result in r0 instead of r8 Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain CC: [v3.7+] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index d22e73e..22b45a4 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -849,7 +849,7 @@ resume_kernel: /* check current_thread_info, _TIF_EMULATE_STACK_STORE */ CURRENT_THREAD_INFO(r9, r1) lwz r8,TI_FLAGS(r9) - andis. r8,r8,_TIF_EMULATE_STACK_STORE@h + andis. r0,r8,_TIF_EMULATE_STACK_STORE@h beq+ 1f addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */ -- cgit v1.1 From 8e44ddc3f34d22c55f2977ac8b160609935d37ca Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 23 May 2013 15:42:21 +0000 Subject: powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras Acked-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvcall.h | 1 + arch/powerpc/kvm/book3s_hv.c | 2 ++ arch/powerpc/kvm/book3s_pr_papr.c | 2 ++ arch/powerpc/kvm/book3s_xics.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 34 insertions(+) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index cf4df8e..0c7f2bf 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -264,6 +264,7 @@ #define H_GET_MPP 0x2D4 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 +#define H_XIRR_X 0x2FC #define H_RANDOM 0x300 #define H_COP 0x304 #define H_GET_MPP_X 0x314 diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9de24f8..550f592 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -562,6 +562,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) { ret = kvmppc_xics_hcall(vcpu, req); break; diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index b24309c..da0e0bc 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -257,6 +257,8 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) return kvmppc_h_pr_xics_hcall(vcpu, cmd); break; diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index f7a1037..94c1dd4 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -650,6 +650,23 @@ static noinline int kvmppc_h_ipi(struct kvm_vcpu *vcpu, unsigned long server, return H_SUCCESS; } +static int kvmppc_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server) +{ + union kvmppc_icp_state state; + struct kvmppc_icp *icp; + + icp = vcpu->arch.icp; + if (icp->server_num != server) { + icp = kvmppc_xics_find_server(vcpu->kvm, server); + if (!icp) + return H_PARAMETER; + } + state = ACCESS_ONCE(icp->state); + kvmppc_set_gpr(vcpu, 4, ((u32)state.cppr << 24) | state.xisr); + kvmppc_set_gpr(vcpu, 5, state.mfrr); + return H_SUCCESS; +} + static noinline void kvmppc_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr) { union kvmppc_icp_state old_state, new_state; @@ -787,6 +804,18 @@ int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req) if (!xics || !vcpu->arch.icp) return H_HARDWARE; + /* These requests don't have real-mode implementations at present */ + switch (req) { + case H_XIRR_X: + res = kvmppc_h_xirr(vcpu); + kvmppc_set_gpr(vcpu, 4, res); + kvmppc_set_gpr(vcpu, 5, get_tb()); + return rc; + case H_IPOLL: + rc = kvmppc_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4)); + return rc; + } + /* Check for real mode returning too hard */ if (xics->real_mode) return kvmppc_xics_rm_complete(vcpu, req); -- cgit v1.1 From f274ef8747d3be649bba8708696fb31cb00fa75a Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 21 May 2013 09:32:48 +0000 Subject: powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 023b288..4459eff 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,6 +19,8 @@ config PPC_PSERIES select ZLIB_DEFLATE select PPC_DOORBELL select HAVE_CONTEXT_TRACKING + select HOTPLUG if SMP + select HOTPLUG_CPU if SMP default y config PPC_SPLPAR -- cgit v1.1 From 279838960484fa22d903086eea743a6b6700647d Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:41 +0000 Subject: powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e9acf50..8acd7c9 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, * ranges. However, some machines (thanks Apple !) tend to split their * space into lots of small contiguous ranges. So we have to coalesce. * - * - We can only cope with all memory ranges having the same offset - * between CPU addresses and PCI addresses. Unfortunately, some bridges - * are setup for a large 1:1 mapping along with a small "window" which - * maps PCI address 0 to some arbitrary high address of the CPU space in - * order to give access to the ISA memory hole. - * The way out of here that I've chosen for now is to always set the - * offset based on the first resource found, then override it if we - * have a different offset and the previous was set by an ISA hole. - * * - Some busses have IO space not starting at 0, which causes trouble with * the way we do our IO resource renumbering. The code somewhat deals with * it for 64 bits but I would expect problems on 32 bits. -- cgit v1.1 From 858957ab1e3a7ee29ed40309bdf0f1b7bcf5bf30 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:42 +0000 Subject: powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8acd7c9..7f2273c 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -671,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen; int pna = of_n_addr_cells(dev); int np = pna + 5; - int memno = 0, isa_hole = -1; + int memno = 0; u32 pci_space; unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; - unsigned long long isa_mb = 0; struct resource *res; printk(KERN_INFO "PCI host bridge %s %s ranges:\n", @@ -768,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, } /* Handles ISA memory hole space here */ if (pci_addr == 0) { - isa_mb = cpu_addr; - isa_hole = memno; if (primary || isa_mem_base == 0) isa_mem_base = cpu_addr; hose->isa_mem_phys = cpu_addr; -- cgit v1.1 From cbda6aa10bd2d97e38f4d26a03a0b2183ad580ba Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:30 +0000 Subject: powerpc/perf: Revert to original NO_SIPR logic This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 426180b..b2f873b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -110,7 +110,7 @@ static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} static bool regs_use_siar(struct pt_regs *regs) { - return !!(regs->result & 1); + return !!regs->result; } /* @@ -181,11 +181,6 @@ static bool regs_sipr(struct pt_regs *regs) return !!(regs->dsisr & sipr); } -static bool regs_no_sipr(struct pt_regs *regs) -{ - return !!(regs->result & 2); -} - static inline u32 perf_flags_from_msr(struct pt_regs *regs) { if (regs->msr & MSR_PR) @@ -208,7 +203,7 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs) * SIAR which should give slightly more reliable * results */ - if (regs_no_sipr(regs)) { + if (ppmu->flags & PPMU_NO_SIPR) { unsigned long siar = mfspr(SPRN_SIAR); if (siar >= PAGE_OFFSET) return PERF_RECORD_MISC_KERNEL; @@ -239,22 +234,9 @@ static inline void perf_read_regs(struct pt_regs *regs) int use_siar; regs->dsisr = mmcra; - regs->result = 0; - - if (ppmu->flags & PPMU_NO_SIPR) - regs->result |= 2; - - /* - * On power8 if we're in random sampling mode, the SIER is updated. - * If we're in continuous sampling mode, we don't have SIPR. - */ - if (ppmu->flags & PPMU_HAS_SIER) { - if (marked) - regs->dar = mfspr(SPRN_SIER); - else - regs->result |= 2; - } + if (ppmu->flags & PPMU_HAS_SIER) + regs->dar = mfspr(SPRN_SIER); /* * If this isn't a PMU exception (eg a software event) the SIAR is @@ -279,12 +261,12 @@ static inline void perf_read_regs(struct pt_regs *regs) use_siar = 1; else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING)) use_siar = 0; - else if (!regs_no_sipr(regs) && regs_sipr(regs)) + else if (!(ppmu->flags & PPMU_NO_SIPR) && regs_sipr(regs)) use_siar = 0; else use_siar = 1; - regs->result |= use_siar; + regs->result = use_siar; } /* -- cgit v1.1 From 58a032c3b106adcd2b83b7e631de3b79f238cdd2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:31 +0000 Subject: powerpc/perf: Add missing SIER support Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index b2f873b..845c867 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -136,22 +136,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) * If we're not doing instruction sampling, give them the SDAR * (sampled data address). If we are doing instruction sampling, then * only give them the SDAR if it corresponds to the instruction - * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or - * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA. + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC, the + * [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA, or the SDAR_VALID bit in SIER. */ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { unsigned long mmcra = regs->dsisr; - unsigned long sdsync; + bool sdar_valid; - if (ppmu->flags & PPMU_SIAR_VALID) - sdsync = POWER7P_MMCRA_SDAR_VALID; - else if (ppmu->flags & PPMU_ALT_SIPR) - sdsync = POWER6_MMCRA_SDSYNC; - else - sdsync = MMCRA_SDSYNC; + if (ppmu->flags & PPMU_HAS_SIER) + sdar_valid = regs->dar & SIER_SDAR_VALID; + else { + unsigned long sdsync; + + if (ppmu->flags & PPMU_SIAR_VALID) + sdsync = POWER7P_MMCRA_SDAR_VALID; + else if (ppmu->flags & PPMU_ALT_SIPR) + sdsync = POWER6_MMCRA_SDSYNC; + else + sdsync = MMCRA_SDSYNC; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + sdar_valid = mmcra & sdsync; + } + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || sdar_valid) *addrp = mfspr(SPRN_SDAR); } @@ -290,8 +298,13 @@ static inline int siar_valid(struct pt_regs *regs) unsigned long mmcra = regs->dsisr; int marked = mmcra & MMCRA_SAMPLE_ENABLE; - if ((ppmu->flags & PPMU_SIAR_VALID) && marked) - return mmcra & POWER7P_MMCRA_SIAR_VALID; + if (marked) { + if (ppmu->flags & PPMU_HAS_SIER) + return regs->dar & SIER_SIAR_VALID; + + if (ppmu->flags & PPMU_SIAR_VALID) + return mmcra & POWER7P_MMCRA_SIAR_VALID; + } return 1; } -- cgit v1.1 From badec11b645e21acbc2411d7759e3efa559af443 Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Mon, 20 May 2013 05:04:18 +0000 Subject: powerpc/cputable: Fix typo on P7+ cputable entry Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b8808bc..1f0937d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -482,7 +482,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7+ (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .cpu_user_features = COMMON_USER2_POWER7, + .cpu_user_features2 = COMMON_USER2_POWER7, .mmu_features = MMU_FTRS_POWER7, .icache_bsize = 128, .dcache_bsize = 128, -- cgit v1.1 From 3f108de96ba449a8df3d7e3c053bf890fee2cb95 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 04:57:09 +0000 Subject: parisc: memory overflow, 'name' length is too short for using 'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 5709c5e..14285ca 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -394,7 +394,7 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char name[20]; + char name[28]; char *output = name; int i; -- cgit v1.1 From ae249b5fa27f9fba25aa59664d4338efc2dd2394 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 28 May 2013 20:35:54 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller --- arch/parisc/include/asm/mmzone.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 0e625ab..cc50d33 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -39,17 +39,14 @@ extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; static inline int pfn_to_nid(unsigned long pfn) { unsigned int i; - unsigned char r; if (unlikely(pfn_is_io(pfn))) return 0; i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - r = pfnnid_map[i]; - BUG_ON(r == 0xff); - return (int)r; + return (int)pfnnid_map[i]; } static inline int pfn_valid(int pfn) -- cgit v1.1 From 766039022a480ede847659daaa78772bdcc598ae Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 29 May 2013 09:56:58 +0000 Subject: parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle Signed-off-by: Helge Deller --- arch/parisc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 1976900..96ec398 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -66,7 +66,7 @@ KBUILD_CFLAGS_KERNEL += -mlong-calls endif # select which processor to optimise for -cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100 cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 -- cgit v1.1 From ea99b1adf22abd62bdcf14b1c9a0a4d3664eefd8 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 01:18:43 +0000 Subject: parisc: kernel: using strlcpy() instead of strcpy() 'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang Acked-by: Kyle McMartin Signed-off-by: Helge Deller --- arch/parisc/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 76b63e72..1e95b20 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -69,7 +69,8 @@ void __init setup_cmdline(char **cmdline_p) /* called from hpux boot loader */ boot_command_line[0] = '\0'; } else { - strcpy(boot_command_line, (char *)__va(boot_args[1])); + strlcpy(boot_command_line, (char *)__va(boot_args[1]), + COMMAND_LINE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ -- cgit v1.1 From 2b6bac9ee99fa7d60dfa0debd82ccf4217931b1e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 13:48:07 +0000 Subject: MAINTAINERS: update parisc architecture file list Signed-off-by: Helge Deller --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7714c3c..f35a259 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6088,7 +6088,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ +F: Documentation/parisc/ F: drivers/parisc/ +F: drivers/char/agp/parisc-agp.c +F: drivers/input/serio/gscps2.c +F: drivers/parport/parport_gsc.* +F: drivers/tty/serial/8250/8250_gsc.c +F: drivers/video/sti* +F: drivers/video/console/sti* +F: drivers/video/logo/logo_parisc* PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie -- cgit v1.1 From b47d4934e71d918814aee4a1d0211f81329b767e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 30 May 2013 11:45:39 -0600 Subject: parisc/PCI: Set type for LBA bus_num resource The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas Signed-off-by: Helge Deller --- drivers/parisc/lba_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 2ef7103..5d25038 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1096,6 +1096,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) r->name = "LBA PCI Busses"; r->start = lba_num & 0xff; r->end = (lba_num>>8) & 0xff; + r->flags = IORESOURCE_BUS; /* Set up local PCI Bus resources - we don't need them for ** Legacy boxes but it's nice to see in /proc/iomem. -- cgit v1.1 From b204a4d2d4f2061659bb5c33f5a4013fb0f6ffbe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 31 May 2013 22:24:58 +0000 Subject: parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) commit dc7dce280a Author: Bjorn Helgaas Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller Acked-by: Bjorn Helgaas --- drivers/parisc/lba_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 5d25038..1f05913 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -668,7 +668,7 @@ lba_fixup_bus(struct pci_bus *bus) BUG(); } - if (ldev->hba.elmmio_space.start) { + if (ldev->hba.elmmio_space.flags) { err = request_resource(&iomem_resource, &(ldev->hba.elmmio_space)); if (err < 0) { @@ -993,7 +993,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) case PAT_LMMIO: /* used to fix up pre-initialized MEM BARs */ - if (!lba_dev->hba.lmmio_space.start) { + if (!lba_dev->hba.lmmio_space.flags) { sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", (int)lba_dev->hba.bus_num.start); @@ -1001,7 +1001,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) io->start; r = &lba_dev->hba.lmmio_space; r->name = lba_dev->hba.lmmio_name; - } else if (!lba_dev->hba.elmmio_space.start) { + } else if (!lba_dev->hba.elmmio_space.flags) { sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", (int)lba_dev->hba.bus_num.start); @@ -1495,7 +1495,7 @@ lba_driver_probe(struct parisc_device *dev) pci_add_resource_offset(&resources, &lba_dev->hba.io_space, HBA_PORT_BASE(lba_dev->hba.hba_num)); - if (lba_dev->hba.elmmio_space.start) + if (lba_dev->hba.elmmio_space.flags) pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.lmmio_space.flags) -- cgit v1.1 From c218c713c56b01d4a1cd69390f675cc44857f5fd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 16:24:46 +0000 Subject: parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller --- drivers/parport/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 24e12d4..a505760 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO config PARPORT_PC_SUPERIO bool "SuperIO chipset support" - depends on PARPORT_PC + depends on PARPORT_PC && !PARISC help Saying Y here enables some probes for Super-IO chipsets in order to find out things like base addresses, IRQ lines and DMA channels. It -- cgit v1.1 From 4edb38695d9a3cd62739f8595e21f36f0aabf4c2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 21:06:39 +0000 Subject: parisc: parport0: fix this legacy no-device port driver! Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller --- drivers/parport/parport_gsc.c | 6 +++--- drivers/parport/parport_gsc.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index a5251cb..6e3a60c 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -234,7 +234,7 @@ static int parport_PS2_supported(struct parport *pb) struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, - int dma, struct pci_dev *dev) + int dma, struct parisc_device *padev) { struct parport_gsc_private *priv; struct parport_operations *ops; @@ -258,7 +258,6 @@ struct parport *parport_gsc_probe_port(unsigned long base, priv->ctr_writable = 0xff; priv->dma_buf = 0; priv->dma_handle = 0; - priv->dev = dev; p->base = base; p->base_hi = base_hi; p->irq = irq; @@ -282,6 +281,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, return NULL; } + p->dev = &padev->dev; p->base_hi = base_hi; p->modes = tmp.modes; p->size = (p->modes & PARPORT_MODE_EPP)?8:3; @@ -373,7 +373,7 @@ static int parport_init_chip(struct parisc_device *dev) } p = parport_gsc_probe_port(port, 0, dev->irq, - /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL); + /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev); if (p) parport_count++; dev_set_drvdata(&dev->dev, p); diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h index fc9c37c..8122147 100644 --- a/drivers/parport/parport_gsc.h +++ b/drivers/parport/parport_gsc.h @@ -217,6 +217,6 @@ extern void parport_gsc_dec_use_count(void); extern struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, int dma, - struct pci_dev *dev); + struct parisc_device *padev); #endif /* __DRIVERS_PARPORT_PARPORT_GSC_H */ -- cgit v1.1 From d683b96b072dc4680fc74964eca77e6a23d1fa6e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Jun 2013 17:11:17 +0900 Subject: Linux 3.10-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 73e20db..49aa84b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.1 From 00dddcaa51f997cdc6dbae3303a31024e29a0fc0 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Tue, 28 May 2013 10:24:57 +0200 Subject: ARM: dts: AM33xx: Fix properties on gpmc node The gpmc driver is actually looking for "gpmc,num-cs" and "gpmc,num-waitpins" properties in DT. The binding doc also states this. Correct the properties in the dts to provide the right values for the gpmc driver. Signed-off-by: Lars Poeschel Acked-by: Peter Korsgaard Acked-by: Pekon Gupta Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am33xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b..8e1248f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -409,8 +409,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - num-cs = <7>; - num-waitpins = <2>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; -- cgit v1.1 From 1e68f43b7dcf0e5eee10baeb3cbe4e1ca59db9fd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 24 May 2013 17:24:21 -0700 Subject: ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line Earlier commits ensured proper muxing of pins related to proper TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC). However these only fixed legacy boot and not DT boot. For DT boot, the default mux values need to be set properly in DT. Special thanks to Nishanth Menon for the review and catching some major flaws in earlier versions. Tested on OMAP4430/Panda and OMAP4460/Panda-ES. Cc: Nishanth Menon Cc: Tony Lindgren Signed-off-by: Kevin Hilman Acked-by: Grygorii Strashko [benoit.cousson@linaro.org: Slightly change the subject to align board name with file name] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4-panda-common.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/omap4-sdp.dts | 20 ++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60d..eeb734e 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -56,9 +56,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -66,6 +80,12 @@ &tpd12s015_pins >; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd..98505a2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ -- cgit v1.1 From 8341613afbc8d65bca8c81158edfb49f36b7ad92 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 17 Apr 2013 18:23:15 -0500 Subject: ARM: dts: OMAP5: Fix missing PWM capability to timer nodes OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM. The PWM capability property is missing from the node definitions of couple of timers. Add ti,timer-pwm attribute for timer 5, 6, 8 and 11. Signed-off-by: Suman Anna [benoit.cousson@linaro.org: Update changelog and subject to highlight the fix] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3dd7ff8..635cae2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -538,6 +538,7 @@ interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; + ti,timer-pwm; }; timer6: timer@4013a000 { @@ -574,6 +575,7 @@ reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; + ti,timer-pwm; }; timer10: timer@48086000 { @@ -581,6 +583,7 @@ reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; + ti,timer-pwm; }; timer11: timer@48088000 { -- cgit v1.1