From cc45ae547b960b805ee0b201b3807e93a0060472 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jun 2012 22:30:52 +0200
Subject: mac80211: make __ieee80211_recalc_idle static

Since it's not called from any file outside where
it's defined, the function can be static if moved
up in the file before the callers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h |   1 -
 net/mac80211/iface.c       | 242 ++++++++++++++++++++++-----------------------
 2 files changed, 121 insertions(+), 122 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f834a00..341d77d 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1284,7 +1284,6 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 			     enum nl80211_iftype type);
 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
 void ieee80211_remove_interfaces(struct ieee80211_local *local);
-u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
 void ieee80211_recalc_idle(struct ieee80211_local *local);
 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
 				    const int offset);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 58c2ab3..0a6b4e1 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -43,6 +43,127 @@
  */
 
 
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+			      const char *reason)
+{
+	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+		return 0;
+
+	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+		return 0;
+
+	drv_flush(local, false);
+
+	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+	int count = 0;
+	bool working = false, scanning = false;
+	unsigned int led_trig_start = 0, led_trig_stop = 0;
+	struct ieee80211_roc_work *roc;
+
+#ifdef CONFIG_PROVE_LOCKING
+	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
+		!lockdep_is_held(&local->iflist_mtx));
+#endif
+	lockdep_assert_held(&local->mtx);
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata)) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+
+		sdata->old_idle = sdata->vif.bss_conf.idle;
+
+		/* do not count disabled managed interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    !sdata->u.mgd.associated &&
+		    !sdata->u.mgd.auth_data &&
+		    !sdata->u.mgd.assoc_data) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* do not count unused IBSS interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+		    !sdata->u.ibss.ssid_len) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* count everything else */
+		sdata->vif.bss_conf.idle = false;
+		count++;
+	}
+
+	if (!local->ops->remain_on_channel) {
+		list_for_each_entry(roc, &local->roc_list, list) {
+			working = true;
+			roc->sdata->vif.bss_conf.idle = false;
+		}
+	}
+
+	if (local->scan_sdata &&
+	    !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
+		scanning = true;
+		local->scan_sdata->vif.bss_conf.idle = false;
+	}
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
+		if (sdata->old_idle == sdata->vif.bss_conf.idle)
+			continue;
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
+	}
+
+	if (working || scanning)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+
+	if (count)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+
+	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
+
+	if (working)
+		return ieee80211_idle_off(local, "working");
+	if (scanning)
+		return ieee80211_idle_off(local, "scanning");
+	if (!count)
+		return ieee80211_idle_on(local);
+	else
+		return ieee80211_idle_off(local, "in use");
+
+	return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	u32 chg;
+
+	mutex_lock(&local->iflist_mtx);
+	chg = __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->iflist_mtx);
+	if (chg)
+		ieee80211_hw_config(local, chg);
+}
+
 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
 {
 	int meshhdrlen;
@@ -1403,127 +1524,6 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 	list_del(&unreg_list);
 }
 
-static u32 ieee80211_idle_off(struct ieee80211_local *local,
-			      const char *reason)
-{
-	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
-		return 0;
-
-	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
-	return IEEE80211_CONF_CHANGE_IDLE;
-}
-
-static u32 ieee80211_idle_on(struct ieee80211_local *local)
-{
-	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
-		return 0;
-
-	drv_flush(local, false);
-
-	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
-	return IEEE80211_CONF_CHANGE_IDLE;
-}
-
-u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int count = 0;
-	bool working = false, scanning = false;
-	unsigned int led_trig_start = 0, led_trig_stop = 0;
-	struct ieee80211_roc_work *roc;
-
-#ifdef CONFIG_PROVE_LOCKING
-	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
-		!lockdep_is_held(&local->iflist_mtx));
-#endif
-	lockdep_assert_held(&local->mtx);
-
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (!ieee80211_sdata_running(sdata)) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-
-		sdata->old_idle = sdata->vif.bss_conf.idle;
-
-		/* do not count disabled managed interfaces */
-		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
-		    !sdata->u.mgd.associated &&
-		    !sdata->u.mgd.auth_data &&
-		    !sdata->u.mgd.assoc_data) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-		/* do not count unused IBSS interfaces */
-		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
-		    !sdata->u.ibss.ssid_len) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-		/* count everything else */
-		sdata->vif.bss_conf.idle = false;
-		count++;
-	}
-
-	if (!local->ops->remain_on_channel) {
-		list_for_each_entry(roc, &local->roc_list, list) {
-			working = true;
-			roc->sdata->vif.bss_conf.idle = false;
-		}
-	}
-
-	if (local->scan_sdata &&
-	    !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
-		scanning = true;
-		local->scan_sdata->vif.bss_conf.idle = false;
-	}
-
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-			continue;
-		if (sdata->old_idle == sdata->vif.bss_conf.idle)
-			continue;
-		if (!ieee80211_sdata_running(sdata))
-			continue;
-		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
-	}
-
-	if (working || scanning)
-		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
-	else
-		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
-
-	if (count)
-		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
-	else
-		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
-
-	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
-
-	if (working)
-		return ieee80211_idle_off(local, "working");
-	if (scanning)
-		return ieee80211_idle_off(local, "scanning");
-	if (!count)
-		return ieee80211_idle_on(local);
-	else
-		return ieee80211_idle_off(local, "in use");
-
-	return 0;
-}
-
-void ieee80211_recalc_idle(struct ieee80211_local *local)
-{
-	u32 chg;
-
-	mutex_lock(&local->iflist_mtx);
-	chg = __ieee80211_recalc_idle(local);
-	mutex_unlock(&local->iflist_mtx);
-	if (chg)
-		ieee80211_hw_config(local, chg);
-}
-
 static int netdev_notify(struct notifier_block *nb,
 			 unsigned long state,
 			 void *ndev)
-- 
cgit v1.1


From dfb89c56add259b72a9c68d6b2846c1cd8c4e4b6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 27 Jun 2012 09:23:48 +0200
Subject: cfg80211: don't allow WoWLAN support without CONFIG_PM

When CONFIG_PM is disabled, no device can possibly
support WoWLAN since it can't go to sleep to start
with. Due to this, mac80211 had even rejected the
hardware registration. By making all the code and
data for WoWLAN depend on CONFIG_PM we can promote
this runtime error to a compile-time error.

Add #ifdef around all WoWLAN code to remove it in
systems that don't need it as they never suspend.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 ++
 drivers/net/wireless/ti/wlcore/main.c      | 2 ++
 include/net/cfg80211.h                     | 2 ++
 net/mac80211/main.c                        | 7 +++----
 net/wireless/core.c                        | 4 ++++
 net/wireless/nl80211.c                     | 6 ++++++
 6 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f27e973..b8fce0d 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3487,6 +3487,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->cipher_suites = cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
+#ifdef CONFIG_PM
 	wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
 			      WIPHY_WOWLAN_DISCONNECT |
 			      WIPHY_WOWLAN_GTK_REKEY_FAILURE  |
@@ -3496,6 +3497,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.n_patterns = WOW_MAX_FILTERS_PER_LIST;
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
+#endif
 
 	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
 
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 1156e3f..747a997 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5321,6 +5321,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 		goto out_free_hw;
 	}
 
+#ifdef CONFIG_PM
 	ret = enable_irq_wake(wl->irq);
 	if (!ret) {
 		wl->irq_wake_enabled = true;
@@ -5334,6 +5335,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 				WL1271_RX_FILTER_MAX_PATTERN_SIZE;
 		}
 	}
+#endif
 	disable_irq(wl->irq);
 
 	ret = wl12xx_get_hw_info(wl);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 061c019..7d3cd3c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2153,7 +2153,9 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+#ifdef CONFIG_PM
 	struct wiphy_wowlan_support wowlan;
+#endif
 
 	u16 max_remain_on_channel_duration;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0b040fb..aded001 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -706,12 +706,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	     local->hw.offchannel_tx_hw_queue >= local->hw.queues))
 		return -EINVAL;
 
-	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns)
 #ifdef CONFIG_PM
-	    && (!local->ops->suspend || !local->ops->resume)
-#endif
-	    )
+	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
+	    (!local->ops->suspend || !local->ops->resume))
 		return -EINVAL;
+#endif
 
 	if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan)
 		return -EINVAL;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 907f62c..ddd32af 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -421,9 +421,11 @@ int wiphy_register(struct wiphy *wiphy)
 	int i;
 	u16 ifmodes = wiphy->interface_modes;
 
+#ifdef CONFIG_PM
 	if (WARN_ON((wiphy->wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
 		    !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
 		return -EINVAL;
+#endif
 
 	if (WARN_ON(wiphy->ap_sme_capa &&
 		    !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
@@ -500,12 +502,14 @@ int wiphy_register(struct wiphy *wiphy)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM
 	if (rdev->wiphy.wowlan.n_patterns) {
 		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
 			    rdev->wiphy.wowlan.pattern_min_len >
 			    rdev->wiphy.wowlan.pattern_max_len))
 			return -EINVAL;
 	}
+#endif
 
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 234ff3b..067c9fe 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1112,6 +1112,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_ifs);
 	}
 
+#ifdef CONFIG_PM
 	if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
 		struct nlattr *nl_wowlan;
 
@@ -1152,6 +1153,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 		nla_nest_end(msg, nl_wowlan);
 	}
+#endif
 
 	if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
 				dev->wiphy.software_iftypes))
@@ -6276,6 +6278,7 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
 	return cfg80211_leave_mesh(rdev, dev);
 }
 
+#ifdef CONFIG_PM
 static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -6504,6 +6507,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
 	kfree(new_triggers.patterns);
 	return err;
 }
+#endif
 
 static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
 {
@@ -7158,6 +7162,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#ifdef CONFIG_PM
 	{
 		.cmd = NL80211_CMD_GET_WOWLAN,
 		.doit = nl80211_get_wowlan,
@@ -7174,6 +7179,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_WIPHY |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#endif
 	{
 		.cmd = NL80211_CMD_SET_REKEY_OFFLOAD,
 		.doit = nl80211_set_rekey_data,
-- 
cgit v1.1


From fc8a7321d3d68af759a369a9ad3e2426688742d3 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Jun 2012 10:33:25 +0200
Subject: mac80211: don't expose ieee80211_add_srates_ie()

This and ieee80211_add_ext_srates_ie() aren't
exported, so can't be used by drivers anyway,
but there's also no reason that they should be
so make them private to mac80211 and use sdata
instead of vif arguments.

Acked-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h     |  6 ------
 net/mac80211/cfg.c         | 12 ++++++------
 net/mac80211/ieee80211_i.h |  4 ++++
 net/mac80211/mesh_plink.c  |  4 ++--
 net/mac80211/tx.c          |  4 ++--
 net/mac80211/util.c        | 10 ++++------
 6 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 510d852..5e67020 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3826,12 +3826,6 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
 
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
-			    struct sk_buff *skb, bool need_basic);
-
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
-				struct sk_buff *skb, bool need_basic);
-
 /**
  * ieee80211_ave_rssi - report the average rssi for the specified interface
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7722a73..ebc353e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2665,8 +2665,8 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev,
 		tf->u.setup_req.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	case WLAN_TDLS_SETUP_RESPONSE:
@@ -2679,8 +2679,8 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev,
 		tf->u.setup_resp.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	case WLAN_TDLS_SETUP_CONFIRM:
@@ -2740,8 +2740,8 @@ ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev,
 		mgmt->u.action.u.tdls_discover_resp.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	default:
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 341d77d..6b7157d 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1480,6 +1480,10 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
 			       enum nl80211_channel_type channel_type,
 			       u16 prot_mode);
+int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
+			    struct sk_buff *skb, bool need_basic);
+int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
+				struct sk_buff *skb, bool need_basic);
 
 /* channel management */
 enum ieee80211_chan_mode {
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index a1dbd15..4256859 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -258,8 +258,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 			pos = skb_put(skb, 2);
 			memcpy(pos + 2, &plid, 2);
 		}
-		if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
-		    ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
+		if (ieee80211_add_srates_ie(sdata, skb, true) ||
+		    ieee80211_add_ext_srates_ie(sdata, skb, true) ||
 		    mesh_add_rsn_ie(skb, sdata) ||
 		    mesh_add_meshid_ie(skb, sdata) ||
 		    mesh_add_meshconf_ie(skb, sdata))
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ec8f5346..4e75303 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2420,9 +2420,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		*pos++ = WLAN_EID_SSID;
 		*pos++ = 0x0;
 
-		if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
+		if (ieee80211_add_srates_ie(sdata, skb, true) ||
 		    mesh_add_ds_params_ie(skb, sdata) ||
-		    ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
+		    ieee80211_add_ext_srates_ie(sdata, skb, true) ||
 		    mesh_add_rsn_ie(skb, sdata) ||
 		    mesh_add_ht_cap_ie(skb, sdata) ||
 		    mesh_add_ht_oper_ie(skb, sdata) ||
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 242ecde..c424569 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1764,15 +1764,14 @@ ieee80211_ht_oper_to_channel_type(struct ieee80211_ht_operation *ht_oper)
 	return channel_type;
 }
 
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
+int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
 			    struct sk_buff *skb, bool need_basic)
 {
-	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	int rate;
 	u8 i, rates, *pos;
-	u32 basic_rates = vif->bss_conf.basic_rates;
+	u32 basic_rates = sdata->vif.bss_conf.basic_rates;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	rates = sband->n_bitrates;
@@ -1796,15 +1795,14 @@ int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
 	return 0;
 }
 
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
+int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb, bool need_basic)
 {
-	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	int rate;
 	u8 i, exrates, *pos;
-	u32 basic_rates = vif->bss_conf.basic_rates;
+	u32 basic_rates = sdata->vif.bss_conf.basic_rates;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	exrates = sband->n_bitrates;
-- 
cgit v1.1


From f823981e288f83113bf1129ff2c94e2fd74a28dd Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 27 Jun 2012 14:18:22 +0300
Subject: mac80211: flush queues before deauth/disassoc

On deauth/disassoc we tear down all BA sessions. These
DELBA packets are sent on the appropriate TID, while
deauth/disassoc is always sent on VO. This sometimes
ends with the DELBA being sent after the deauth was
already sent.

Fix it by flushing all the pending frames before
sending deauth/disassoc.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e11cd0e..c54388b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1364,6 +1364,10 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 	mutex_unlock(&local->sta_mtx);
 
+	/* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
+	if (tx)
+		drv_flush(local, false);
+
 	/* deauthenticate/disassociate now */
 	if (tx || frame_buf)
 		ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
-- 
cgit v1.1


From c9b22fb87a00ceb8afa78089d5cf676cf8b3319d Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 25 Jun 2012 10:48:25 +0300
Subject: mac80211: don't require associated->beacon_ies for ps

beacon_ies is needed only in order to extract the dtim
period. However, even if it's missing we can still enter
ps with dtim=1 (which also happens if the TIM ie is invalid).

Most drivers don't use conf.max_sleep_period/ps_dtim_period
anyway, and this check prevents them from entering ps if
they don't have beacon (but only probe response), even though
the beacon is not needed at all.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c54388b..398acc4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -902,9 +902,6 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
 	if (!mgd->associated)
 		return false;
 
-	if (!mgd->associated->beacon_ies)
-		return false;
-
 	if (mgd->flags & (IEEE80211_STA_BEACON_POLL |
 			  IEEE80211_STA_CONNECTION_POLL))
 		return false;
-- 
cgit v1.1


From ce0e169529a2db1cd910d2d45a5713fcdc29f6e1 Mon Sep 17 00:00:00 2001
From: Mahesh Palivela <maheshp@posedge.com>
Date: Fri, 22 Jun 2012 07:27:46 +0000
Subject: wireless: add VHT (802.11ac) definitions

Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 70 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 318fc1f..abf0e5fe 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1092,6 +1092,73 @@ struct ieee80211_ht_operation {
 #define WLAN_HT_SMPS_CONTROL_STATIC	1
 #define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
 
+#define VHT_MCS_SUPPORTED_SET_SIZE      8
+
+struct ieee80211_vht_capabilities {
+	__le32 vht_capabilities_info;
+	u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE];
+} __packed;
+
+struct ieee80211_vht_operation {
+	u8 vht_op_info_chwidth;
+	u8 vht_op_info_chan_center_freq_seg1_idx;
+	u8 vht_op_info_chan_center_freq_seg2_idx;
+	__le16 vht_basic_mcs_set;
+} __packed;
+
+/**
+ * struct ieee80211_vht_mcs_info - VHT MCS information
+ * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams
+ * @rx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can receive. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest RX data rate supported.
+ * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
+ * @tx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can transmit. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest TX data rate supported.
+ */
+struct ieee80211_vht_mcs_info {
+	__le16 rx_mcs_map;
+	__le16 rx_highest;
+	__le16 tx_mcs_map;
+	__le16 tx_highest;
+} __packed;
+
+#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0
+#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1
+#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT  2
+#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3
+
+/* 802.11ac VHT Capabilities */
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895                0x00000000
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991                0x00000001
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454               0x00000002
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ              0x00000004
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ     0x00000008
+#define IEEE80211_VHT_CAP_RXLDPC                              0x00000010
+#define IEEE80211_VHT_CAP_SHORT_GI_80                         0x00000020
+#define IEEE80211_VHT_CAP_SHORT_GI_160                        0x00000040
+#define IEEE80211_VHT_CAP_TXSTBC                              0x00000080
+#define IEEE80211_VHT_CAP_RXSTBC_1                            0x00000100
+#define IEEE80211_VHT_CAP_RXSTBC_2                            0x00000200
+#define IEEE80211_VHT_CAP_RXSTBC_3                            0x00000300
+#define IEEE80211_VHT_CAP_RXSTBC_4                            0x00000400
+#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE               0x00000800
+#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE               0x00001000
+#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX             0x00006000
+#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX              0x00030000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE               0x00080000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE               0x00100000
+#define IEEE80211_VHT_CAP_VHT_TXOP_PS                         0x00200000
+#define IEEE80211_VHT_CAP_HTC_VHT                             0x00400000
+#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT          0x00800000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB   0x08000000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB     0x0c000000
+#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN                  0x10000000
+#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN                  0x20000000
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -1352,6 +1419,9 @@ enum ieee80211_eid {
 	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
 	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
 	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+
+	WLAN_EID_VHT_CAPABILITY = 191,
+	WLAN_EID_VHT_OPERATION = 192,
 };
 
 /* Action category code */
-- 
cgit v1.1


From bf0c111ec80355ee9fe2e2bdb609a536b54768d8 Mon Sep 17 00:00:00 2001
From: Mahesh Palivela <maheshp@posedge.com>
Date: Fri, 22 Jun 2012 07:27:46 +0000
Subject: cfg80211: allow advertising VHT capabilities

Allow drivers to advertise their VHT capabilities
and export them to userspace via nl80211.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h |  6 ++++++
 include/net/cfg80211.h  | 17 +++++++++++++++++
 net/wireless/nl80211.c  |  9 +++++++++
 3 files changed, 32 insertions(+)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c0fc5d2..2300327 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1813,6 +1813,9 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ *	defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -1826,6 +1829,9 @@ enum nl80211_band_attr {
 	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
 	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
 
+	NL80211_BAND_ATTR_VHT_MCS_SET,
+	NL80211_BAND_ATTR_VHT_CAPA,
+
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
 	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7d3cd3c..1fc89c4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -211,6 +211,22 @@ struct ieee80211_sta_ht_cap {
 };
 
 /**
+ * struct ieee80211_sta_vht_cap - STA's VHT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ac VHT capabilities for an STA.
+ *
+ * @vht_supported: is VHT supported by the STA
+ * @cap: VHT capabilities map as described in 802.11ac spec
+ * @vht_mcs: Supported VHT MCS rates
+ */
+struct ieee80211_sta_vht_cap {
+	bool vht_supported;
+	u32 cap; /* use IEEE80211_VHT_CAP_ */
+	struct ieee80211_vht_mcs_info vht_mcs;
+};
+
+/**
  * struct ieee80211_supported_band - frequency band definition
  *
  * This structure describes a frequency band a wiphy
@@ -233,6 +249,7 @@ struct ieee80211_supported_band {
 	int n_channels;
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
+	struct ieee80211_sta_vht_cap vht_cap;
 };
 
 /*
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 067c9fe..5c4a720 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -921,6 +921,15 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 				dev->wiphy.bands[band]->ht_cap.ampdu_density)))
 			goto nla_put_failure;
 
+		/* add VHT info */
+		if (dev->wiphy.bands[band]->vht_cap.vht_supported &&
+		    (nla_put(msg, NL80211_BAND_ATTR_VHT_MCS_SET,
+			     sizeof(dev->wiphy.bands[band]->vht_cap.vht_mcs),
+			     &dev->wiphy.bands[band]->vht_cap.vht_mcs) ||
+		     nla_put_u32(msg, NL80211_BAND_ATTR_VHT_CAPA,
+				 dev->wiphy.bands[band]->vht_cap.cap)))
+			goto nla_put_failure;
+
 		/* add frequencies */
 		nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
 		if (!nl_freqs)
-- 
cgit v1.1


From 60771780c27cbc93d0b78da0c7fd7a8a540b029e Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:56 +0200
Subject: cfg80211: introduce cfg80211_stop_ap

This functionality will be reused when interface
is going down. Avoids code duplication. Also adds
missing wdev locking.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/Makefile  |  2 +-
 net/wireless/ap.c      | 44 ++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/core.h    |  4 ++++
 net/wireless/nl80211.c | 17 +----------------
 4 files changed, 50 insertions(+), 17 deletions(-)
 create mode 100644 net/wireless/ap.c

diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 55a28ab..0f7e0d6 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
 obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
 
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
diff --git a/net/wireless/ap.c b/net/wireless/ap.c
new file mode 100644
index 0000000..45199cc
--- /dev/null
+++ b/net/wireless/ap.c
@@ -0,0 +1,44 @@
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+
+
+static int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+			      struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (!rdev->ops->stop_ap)
+		return -EOPNOTSUPP;
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+		return -EOPNOTSUPP;
+
+	if (!wdev->beacon_interval)
+		return -ENOENT;
+
+	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
+	if (!err)
+		wdev->beacon_interval = 0;
+
+	return err;
+}
+
+int cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+		     struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_stop_ap(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 609a579..fef476d2 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -289,6 +289,10 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 			   struct wireless_dev *wdev, int freq,
 			   enum nl80211_channel_type channel_type);
 
+/* AP */
+int cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+		     struct net_device *dev);
+
 /* MLME */
 int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 			 struct net_device *dev,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5c4a720..20d0fd6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2521,23 +2521,8 @@ static int nl80211_stop_ap(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
-	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	int err;
-
-	if (!rdev->ops->stop_ap)
-		return -EOPNOTSUPP;
 
-	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
-	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
-		return -EOPNOTSUPP;
-
-	if (!wdev->beacon_interval)
-		return -ENOENT;
-
-	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
-	if (!err)
-		wdev->beacon_interval = 0;
-	return err;
+	return cfg80211_stop_ap(rdev, dev);
 }
 
 static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
-- 
cgit v1.1


From ac800140c20e7ae51117e71289065bedd4930fc2 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:57 +0200
Subject: cfg80211: .stop_ap when interface is going down

We'll need this for proper channel tracking (which
is going to be needed for channel context
accounting and finding matching/active interface
combination).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c | 3 +++
 net/wireless/util.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index ddd32af..c65f59c 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -810,6 +810,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		case NL80211_IFTYPE_MESH_POINT:
 			cfg80211_leave_mesh(rdev, dev);
 			break;
+		case NL80211_IFTYPE_AP:
+			cfg80211_stop_ap(rdev, dev);
+			break;
 		default:
 			break;
 		}
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 316cfd0..fc948d0 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -814,6 +814,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		dev->ieee80211_ptr->mesh_id_up_len = 0;
 
 		switch (otype) {
+		case NL80211_IFTYPE_AP:
+			cfg80211_stop_ap(rdev, dev);
+			break;
 		case NL80211_IFTYPE_ADHOC:
 			cfg80211_leave_ibss(rdev, dev, false);
 			break;
-- 
cgit v1.1


From f4489ebeffa436c8427a20e2f05004e783708cde Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:58 +0200
Subject: cfg80211: add channel tracking for AP and mesh

We need to know which channel is used by a running
AP and mesh for channel context accounting and
finding matching/active interface combination.

STA/IBSS have current_bss already which allows us
to check which channel a vif is tuned to.
Non-fixed channel IBSS can be handled with
additional changes.

Monitor mode is going to be handled differently.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h |  3 +++
 net/wireless/ap.c      |  4 +++-
 net/wireless/mesh.c    | 18 ++++++++++++++----
 net/wireless/mlme.c    |  1 +
 net/wireless/nl80211.c |  1 +
 5 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1fc89c4..c62bc78 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2408,6 +2408,9 @@ struct wireless_dev {
 	struct ieee80211_channel *preset_chan;
 	enum nl80211_channel_type preset_chantype;
 
+	/* for AP and mesh channel tracking */
+	struct ieee80211_channel *channel;
+
 	bool ps;
 	int ps_timeout;
 
diff --git a/net/wireless/ap.c b/net/wireless/ap.c
index 45199cc..fcc60d8 100644
--- a/net/wireless/ap.c
+++ b/net/wireless/ap.c
@@ -24,8 +24,10 @@ static int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
 		return -ENOENT;
 
 	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
-	if (!err)
+	if (!err) {
 		wdev->beacon_interval = 0;
+		wdev->channel = NULL;
+	}
 
 	return err;
 }
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 3b73b07..bab3813 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -159,6 +159,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	if (!err) {
 		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
 		wdev->mesh_id_len = setup->mesh_id_len;
+		wdev->channel = setup->channel;
 	}
 
 	return err;
@@ -184,6 +185,7 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 			   enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_channel *channel;
+	int err;
 
 	channel = rdev_freq_to_chan(rdev, freq, channel_type);
 	if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
@@ -205,9 +207,14 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 
 		if (!netif_running(wdev->netdev))
 			return -ENETDOWN;
-		return rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
-							    wdev->netdev,
-							    channel);
+
+		err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
+							   wdev->netdev,
+							   channel);
+		if (!err)
+			wdev->channel = channel;
+
+		return err;
 	}
 
 	if (wdev->mesh_id_len)
@@ -249,8 +256,11 @@ static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 		return -ENOTCONN;
 
 	err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
-	if (!err)
+	if (!err) {
 		wdev->mesh_id_len = 0;
+		wdev->channel = NULL;
+	}
+
 	return err;
 }
 
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index da4406f..a7882eb 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -947,6 +947,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
 	if (WARN_ON(!chan))
 		goto out;
 
+	wdev->channel = chan;
 	nl80211_ch_switch_notify(rdev, dev, freq, type, GFP_KERNEL);
 out:
 	wdev_unlock(wdev);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 20d0fd6..12096b4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2488,6 +2488,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		wdev->preset_chan = params.channel;
 		wdev->preset_chantype = params.channel_type;
 		wdev->beacon_interval = params.beacon_interval;
+		wdev->channel = params.channel;
 	}
 	return err;
 }
-- 
cgit v1.1


From c30a3d38689bc601e03d5f2ad3c37d8ea13e46ca Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:59 +0200
Subject: cfg80211: track ibss fixed channel

IBSS may hop between channels. It is necessary to
account this special case when considering
interface combinations.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h | 2 ++
 net/wireless/ibss.c    | 1 +
 2 files changed, 3 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c62bc78..e030c6a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2411,6 +2411,8 @@ struct wireless_dev {
 	/* for AP and mesh channel tracking */
 	struct ieee80211_channel *channel;
 
+	bool ibss_fixed;
+
 	bool ps;
 	int ps_timeout;
 
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index 89baa33..b90fd86 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -113,6 +113,7 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
 		kfree(wdev->connect_keys);
 	wdev->connect_keys = connkeys;
 
+	wdev->ibss_fixed = params->channel_fixed;
 #ifdef CONFIG_CFG80211_WEXT
 	wdev->wext.ibss.channel = params->channel;
 #endif
-- 
cgit v1.1


From 26ab9a0c589db9ba2710f042c4959da25fd3297b Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:00 +0200
Subject: cfg80211: introduce cfg80211_get_chan_state

Helper function for finding out which channel is
used by a given interface.

An exclusive channel can be used only by a single
interface. This is mainly for non-fixed channel
IBSS handling.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/chan.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/core.h | 12 ++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index c1999e4..167e7cb 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -92,3 +92,54 @@ int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
 
 	return rdev->ops->set_monitor_channel(&rdev->wiphy, chan, chantype);
 }
+
+void
+cfg80211_get_chan_state(struct cfg80211_registered_device *rdev,
+		        struct wireless_dev *wdev,
+		        struct ieee80211_channel **chan,
+		        enum cfg80211_chan_mode *chanmode)
+{
+	*chan = NULL;
+	*chanmode = CHAN_MODE_UNDEFINED;
+
+	ASSERT_RDEV_LOCK(rdev);
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (!netif_running(wdev->netdev))
+		return;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_ADHOC:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = wdev->ibss_fixed
+				  ? CHAN_MODE_SHARED
+				  : CHAN_MODE_EXCLUSIVE;
+			return;
+		}
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = CHAN_MODE_SHARED;
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_MESH_POINT:
+		*chan = wdev->channel;
+		*chanmode = CHAN_MODE_SHARED;
+		return;
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_WDS:
+		/* these interface types don't really have a channel */
+		return;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		WARN_ON(1);
+	}
+
+	return;
+}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index fef476d2..56f18c2 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -241,6 +241,12 @@ struct cfg80211_cached_keys {
 	int def, defmgmt;
 };
 
+enum cfg80211_chan_mode {
+	CHAN_MODE_UNDEFINED,
+	CHAN_MODE_SHARED,
+	CHAN_MODE_EXCLUSIVE,
+};
+
 
 /* free object */
 extern void cfg80211_dev_free(struct cfg80211_registered_device *rdev);
@@ -419,6 +425,12 @@ cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
 	return cfg80211_can_change_interface(rdev, NULL, iftype);
 }
 
+void
+cfg80211_get_chan_state(struct cfg80211_registered_device *rdev,
+		        struct wireless_dev *wdev,
+		        struct ieee80211_channel **chan,
+		        enum cfg80211_chan_mode *chanmode);
+
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type);
-- 
cgit v1.1


From dbbae26afa81320b3315fb4ad755b20f1ff256b4 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:01 +0200
Subject: cfg80211: track monitor interfaces count

Implements .set_monitor_enabled(wiphy, enabled).

Notifies driver upon change of interface layout.

If only monitor interfaces become present it is
called with 2nd argument being true. If
non-monitor interface appears then 2nd argument
is false. Driver is notified only upon change.

This makes it more obvious about the fact that
cfg80211 supports single monitor channel. Once we
implement multi-channel we don't want to allow
setting monitor channel while other interface
types are running. Otherwise it would be ambiguous
once we start considering num_different_channels.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h |  4 ++++
 net/wireless/core.c    | 24 ++++++++++++++++++++++++
 net/wireless/core.h    | 14 ++++++++++++++
 net/wireless/util.c    |  5 +++++
 4 files changed, 47 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e030c6a..f0d213d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1499,6 +1499,8 @@ struct cfg80211_gtk_rekey_data {
  *	interfaces are active this callback should reject the configuration.
  *	If no interfaces are active or the device is down, the channel should
  *	be stored for when a monitor interface becomes active.
+ * @set_monitor_enabled: Notify driver that there are only monitor
+ *	interfaces running.
  * @get_channel: Get the current operating channel, should return %NULL if
  *	there's no single defined operating channel if for example the
  *	device implements channel hopping for multi-channel virtual interfaces.
@@ -1817,6 +1819,8 @@ struct cfg80211_ops {
 				struct ethtool_stats *stats, u64 *data);
 	void	(*get_et_strings)(struct wiphy *wiphy, struct net_device *dev,
 				  u32 sset, u8 *data);
+
+	void (*set_monitor_enabled)(struct wiphy *wiphy, bool enabled);
 };
 
 /*
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c65f59c..8412da7d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -717,6 +717,24 @@ static struct device_type wiphy_type = {
 	.name	= "wlan",
 };
 
+void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
+			       enum nl80211_iftype iftype, int num)
+{
+	bool has_monitors_only_old = cfg80211_has_monitors_only(rdev);
+	bool has_monitors_only_new;
+
+	ASSERT_RDEV_LOCK(rdev);
+
+	rdev->num_running_ifaces += num;
+	if (iftype == NL80211_IFTYPE_MONITOR)
+		rdev->num_running_monitor_ifaces += num;
+
+	has_monitors_only_new = cfg80211_has_monitors_only(rdev);
+	if (has_monitors_only_new != has_monitors_only_old)
+		rdev->ops->set_monitor_enabled(&rdev->wiphy,
+					       has_monitors_only_new);
+}
+
 static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 					 unsigned long state,
 					 void *ndev)
@@ -820,6 +838,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		break;
 	case NETDEV_DOWN:
 		dev_hold(dev);
+		cfg80211_lock_rdev(rdev);
+		cfg80211_update_iface_num(rdev, wdev->iftype, -1);
+		cfg80211_unlock_rdev(rdev);
 		queue_work(cfg80211_wq, &wdev->cleanup_work);
 		break;
 	case NETDEV_UP:
@@ -927,6 +948,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		ret = cfg80211_can_add_interface(rdev, wdev->iftype);
 		if (ret)
 			return notifier_from_errno(ret);
+		cfg80211_lock_rdev(rdev);
+		cfg80211_update_iface_num(rdev, wdev->iftype, 1);
+		cfg80211_unlock_rdev(rdev);
 		break;
 	}
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 56f18c2..99acd51 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -56,6 +56,9 @@ struct cfg80211_registered_device {
 
 	u32 ap_beacons_nlpid;
 
+	int num_running_ifaces;
+	int num_running_monitor_ifaces;
+
 	/* BSSes/scanning */
 	spinlock_t bss_lock;
 	struct list_head bss_list;
@@ -197,6 +200,14 @@ static inline void wdev_unlock(struct wireless_dev *wdev)
 #define ASSERT_RDEV_LOCK(rdev) lockdep_assert_held(&(rdev)->mtx)
 #define ASSERT_WDEV_LOCK(wdev) lockdep_assert_held(&(wdev)->mtx)
 
+static inline bool cfg80211_has_monitors_only(struct cfg80211_registered_device *rdev)
+{
+	ASSERT_RDEV_LOCK(rdev);
+
+	return rdev->num_running_ifaces == rdev->num_running_monitor_ifaces &&
+	       rdev->num_running_ifaces > 0;
+}
+
 enum cfg80211_event_type {
 	EVENT_CONNECT_RESULT,
 	EVENT_ROAMED,
@@ -444,6 +455,9 @@ int ieee80211_get_ratemask(struct ieee80211_supported_band *sband,
 int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 				 u32 beacon_int);
 
+void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
+			       enum nl80211_iftype iftype, int num);
+
 #ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
 #define CFG80211_DEV_WARN_ON(cond)	WARN_ON(cond)
 #else
diff --git a/net/wireless/util.c b/net/wireless/util.c
index fc948d0..9b92ec5 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -871,6 +871,11 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		}
 	}
 
+	if (!err && ntype != otype && netif_running(dev)) {
+		cfg80211_update_iface_num(rdev, ntype, 1);
+		cfg80211_update_iface_num(rdev, otype, -1);
+	}
+
 	return err;
 }
 
-- 
cgit v1.1


From 870d37fc22f3e40f9f23e06c581c8538fc16a2f0 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:02 +0200
Subject: mac80211: refactor virtual monitor code

Use cfg80211 the new .set_monitor_enabled instead
of tracking it inside mac80211.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c         | 11 +++++++++++
 net/mac80211/ieee80211_i.h |  4 ++++
 net/mac80211/iface.c       | 16 ++--------------
 3 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0f02c8b..ea4b1ea 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2990,6 +2990,16 @@ ieee80211_wiphy_get_channel(struct wiphy *wiphy,
 	return local->oper_channel;
 }
 
+static void ieee80211_set_monitor_enabled(struct wiphy *wiphy, bool enabled)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	if (enabled)
+		WARN_ON(ieee80211_add_virtual_monitor(local));
+	else
+		ieee80211_del_virtual_monitor(local);
+}
+
 #ifdef CONFIG_PM
 static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled)
 {
@@ -3065,6 +3075,7 @@ struct cfg80211_ops mac80211_config_ops = {
 	.probe_client = ieee80211_probe_client,
 	.get_channel = ieee80211_wiphy_get_channel,
 	.set_noack_map = ieee80211_set_noack_map,
+	.set_monitor_enabled = ieee80211_set_monitor_enabled,
 #ifdef CONFIG_PM
 	.set_wakeup = ieee80211_set_wakeup,
 #endif
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6b7157d..b88bdfd 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1485,6 +1485,10 @@ int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
 int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb, bool need_basic);
 
+/* virtual monitor */
+int ieee80211_add_virtual_monitor(struct ieee80211_local *local);
+void ieee80211_del_virtual_monitor(struct ieee80211_local *local);
+
 /* channel management */
 enum ieee80211_chan_mode {
 	CHAN_MODE_UNDEFINED,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 0a6b4e1..fbef7a1 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -330,7 +330,7 @@ static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata)
 	sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
 }
 
-static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
+int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata;
 	int ret;
@@ -371,7 +371,7 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
 	return 0;
 }
 
-static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
+void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata;
 
@@ -487,12 +487,6 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 			break;
 		}
 
-		if (local->monitors == 0 && local->open_count == 0) {
-			res = ieee80211_add_virtual_monitor(local);
-			if (res)
-				goto err_stop;
-		}
-
 		/* must be before the call to ieee80211_configure_filter */
 		local->monitors++;
 		if (local->monitors == 1) {
@@ -507,8 +501,6 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		break;
 	default:
 		if (coming_up) {
-			ieee80211_del_virtual_monitor(local);
-
 			res = drv_add_interface(local, sdata);
 			if (res)
 				goto err_stop;
@@ -743,7 +735,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		if (local->monitors == 0) {
 			local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
 			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
-			ieee80211_del_virtual_monitor(local);
 		}
 
 		ieee80211_adjust_monitor_flags(sdata, -1);
@@ -817,9 +808,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-
-	if (local->monitors == local->open_count && local->monitors > 0)
-		ieee80211_add_virtual_monitor(local);
 }
 
 static int ieee80211_stop(struct net_device *dev)
-- 
cgit v1.1


From 4f03c1ed8901a01ad4abcef95c02c007a2d481c2 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:03 +0200
Subject: cfg80211: refuse to .set_monitor_channel when non-monitors are
 present

Having .set_monitor_channel work with non-monitor
interfaces running would make interface
combinations accounting ambiguous.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/chan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 167e7cb..019401b 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -85,6 +85,8 @@ int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
 
 	if (!rdev->ops->set_monitor_channel)
 		return -EOPNOTSUPP;
+	if (!cfg80211_has_monitors_only(rdev))
+		return -EBUSY;
 
 	chan = rdev_freq_to_chan(rdev, freq, chantype);
 	if (!chan)
-- 
cgit v1.1


From b78e8ceac23655e1e06b30aa95ab11742d1ac7c0 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:04 +0200
Subject: cfg80211: track monitor channel

Make it even more obvious we support single
monitor channel. This will allow us to remove
.get_channel.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/chan.c | 9 ++++++++-
 net/wireless/core.c | 8 +++++++-
 net/wireless/core.h | 3 +++
 3 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 019401b..434c56b 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -82,6 +82,7 @@ int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
 				 int freq, enum nl80211_channel_type chantype)
 {
 	struct ieee80211_channel *chan;
+	int err;
 
 	if (!rdev->ops->set_monitor_channel)
 		return -EOPNOTSUPP;
@@ -92,7 +93,13 @@ int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
 	if (!chan)
 		return -EINVAL;
 
-	return rdev->ops->set_monitor_channel(&rdev->wiphy, chan, chantype);
+	err = rdev->ops->set_monitor_channel(&rdev->wiphy, chan, chantype);
+	if (!err) {
+		rdev->monitor_channel = chan;
+		rdev->monitor_channel_type = chantype;
+	}
+
+	return err;
 }
 
 void
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 8412da7d..1b5daa7 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -730,9 +730,15 @@ void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
 		rdev->num_running_monitor_ifaces += num;
 
 	has_monitors_only_new = cfg80211_has_monitors_only(rdev);
-	if (has_monitors_only_new != has_monitors_only_old)
+	if (has_monitors_only_new != has_monitors_only_old) {
 		rdev->ops->set_monitor_enabled(&rdev->wiphy,
 					       has_monitors_only_new);
+
+		if (!has_monitors_only_new) {
+			rdev->monitor_channel = NULL;
+			rdev->monitor_channel_type = NL80211_CHAN_NO_HT;
+		}
+	}
 }
 
 static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 99acd51..d5efe1b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -59,6 +59,9 @@ struct cfg80211_registered_device {
 	int num_running_ifaces;
 	int num_running_monitor_ifaces;
 
+	struct ieee80211_channel *monitor_channel;
+	enum nl80211_channel_type monitor_channel_type;
+
 	/* BSSes/scanning */
 	spinlock_t bss_lock;
 	struct list_head bss_list;
-- 
cgit v1.1


From a69b40a95b121c4bfc52a20cccd28708ae550af1 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:05 +0200
Subject: cfg80211: set initial monitor channel

Implements behaviour seen in mac80211. A running
monitor always has a channel - even before
.set_channel. This way we won't break current
behaviour.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 1b5daa7..580551e 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -717,6 +717,35 @@ static struct device_type wiphy_type = {
 	.name	= "wlan",
 };
 
+static struct ieee80211_channel *
+cfg80211_get_any_chan(struct cfg80211_registered_device *rdev)
+{
+	struct ieee80211_supported_band *sband;
+	int i;
+
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		sband = rdev->wiphy.bands[i];
+		if (sband && sband->n_channels > 0)
+			return &sband->channels[0];
+	}
+
+	return NULL;
+}
+
+static void cfg80211_init_mon_chan(struct cfg80211_registered_device *rdev)
+{
+	struct ieee80211_channel *chan;
+
+	chan = cfg80211_get_any_chan(rdev);
+	if (WARN_ON(!chan))
+		return;
+
+	mutex_lock(&rdev->devlist_mtx);
+	WARN_ON(cfg80211_set_monitor_channel(rdev, chan->center_freq,
+					     NL80211_CHAN_NO_HT));
+	mutex_unlock(&rdev->devlist_mtx);
+}
+
 void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
 			       enum nl80211_iftype iftype, int num)
 {
@@ -737,6 +766,8 @@ void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
 		if (!has_monitors_only_new) {
 			rdev->monitor_channel = NULL;
 			rdev->monitor_channel_type = NL80211_CHAN_NO_HT;
+		} else {
+			cfg80211_init_mon_chan(rdev);
 		}
 	}
 }
-- 
cgit v1.1


From 2e165b818456ecc1024dd0387eeac64745526377 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:06 +0200
Subject: cfg80211/mac80211: remove .get_channel

We do not need it anymore since cfg80211 tracks
monitor channel and monitor channel type.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h     |  6 ------
 net/mac80211/cfg.c         | 11 -----------
 net/wireless/nl80211.c     | 15 +++++----------
 net/wireless/wext-compat.c |  9 ++-------
 4 files changed, 7 insertions(+), 34 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f0d213d..fa26934 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1501,9 +1501,6 @@ struct cfg80211_gtk_rekey_data {
  *	be stored for when a monitor interface becomes active.
  * @set_monitor_enabled: Notify driver that there are only monitor
  *	interfaces running.
- * @get_channel: Get the current operating channel, should return %NULL if
- *	there's no single defined operating channel if for example the
- *	device implements channel hopping for multi-channel virtual interfaces.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1810,9 +1807,6 @@ struct cfg80211_ops {
 				  struct net_device *dev,
 				  u16 noack_map);
 
-	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy,
-					       enum nl80211_channel_type *type);
-
 	int	(*get_et_sset_count)(struct wiphy *wiphy,
 				     struct net_device *dev, int sset);
 	void	(*get_et_stats)(struct wiphy *wiphy, struct net_device *dev,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index ea4b1ea..ccbe241 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2980,16 +2980,6 @@ static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
-static struct ieee80211_channel *
-ieee80211_wiphy_get_channel(struct wiphy *wiphy,
-			    enum nl80211_channel_type *type)
-{
-	struct ieee80211_local *local = wiphy_priv(wiphy);
-
-	*type = local->_oper_channel_type;
-	return local->oper_channel;
-}
-
 static void ieee80211_set_monitor_enabled(struct wiphy *wiphy, bool enabled)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
@@ -3073,7 +3063,6 @@ struct cfg80211_ops mac80211_config_ops = {
 	.tdls_oper = ieee80211_tdls_oper,
 	.tdls_mgmt = ieee80211_tdls_mgmt,
 	.probe_client = ieee80211_probe_client,
-	.get_channel = ieee80211_wiphy_get_channel,
 	.set_noack_map = ieee80211_set_noack_map,
 	.set_monitor_enabled = ieee80211_set_monitor_enabled,
 #ifdef CONFIG_PM
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 12096b4..5d29ed1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1689,16 +1689,11 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 			(cfg80211_rdev_list_generation << 2)))
 		goto nla_put_failure;
 
-	if (rdev->ops->get_channel) {
-		struct ieee80211_channel *chan;
-		enum nl80211_channel_type channel_type;
-
-		chan = rdev->ops->get_channel(&rdev->wiphy, &channel_type);
-		if (chan &&
-		    (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
-				    chan->center_freq) ||
-		     nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-				    channel_type)))
+	if (rdev->monitor_channel) {
+		if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
+				rdev->monitor_channel->center_freq) ||
+		    nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+				rdev->monitor_channel_type))
 			goto nla_put_failure;
 	}
 
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index bc87983..7df42f5 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -827,8 +827,6 @@ static int cfg80211_wext_giwfreq(struct net_device *dev,
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
-	struct ieee80211_channel *chan;
-	enum nl80211_channel_type channel_type;
 
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
@@ -836,13 +834,10 @@ static int cfg80211_wext_giwfreq(struct net_device *dev,
 	case NL80211_IFTYPE_ADHOC:
 		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
 	case NL80211_IFTYPE_MONITOR:
-		if (!rdev->ops->get_channel)
+		if (!rdev->monitor_channel)
 			return -EINVAL;
 
-		chan = rdev->ops->get_channel(wdev->wiphy, &channel_type);
-		if (!chan)
-			return -EINVAL;
-		freq->m = chan->center_freq;
+		freq->m = rdev->monitor_channel->center_freq;
 		freq->e = 6;
 		return 0;
 	default:
-- 
cgit v1.1


From d4e50c5917e110451ced8f8de594cea858791f37 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:07 +0200
Subject: cfg80211: add channel checking for iface combinations

.connect cannot be handled since the driver scans
and connects on its own. It is up to the driver
then to refuse a connection (with -EBUSY for
example).

Non-fixed channel IBSSes always take a single
channel resource. For example two non-fixed
channel IBSSes always take up 2
num_different_channels, even if they operate on
the same channel at a given point of time.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c |  8 ++++++++
 net/wireless/core.h | 29 +++++++++++++++++++++++---
 net/wireless/util.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++-----
 3 files changed, 88 insertions(+), 8 deletions(-)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 580551e..b26695a 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -373,6 +373,14 @@ static int wiphy_verify_combinations(struct wiphy *wiphy)
 		if (WARN_ON(!c->num_different_channels))
 			return -EINVAL;
 
+		/*
+		 * Put a sane limit on maximum number of different
+		 * channels to simplify channel accounting code.
+		 */
+		if (WARN_ON(c->num_different_channels >
+				CFG80211_MAX_NUM_DIFFERENT_CHANNELS))
+			return -EINVAL;
+
 		if (WARN_ON(!c->n_limits))
 			return -EINVAL;
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index d5efe1b..81fef3d 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -428,9 +428,20 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  u32 *flags, struct vif_params *params);
 void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
 
-int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
-				  struct wireless_dev *wdev,
-				  enum nl80211_iftype iftype);
+int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
+				 struct wireless_dev *wdev,
+				 enum nl80211_iftype iftype,
+				 struct ieee80211_channel *chan,
+				 enum cfg80211_chan_mode chanmode);
+
+static inline int
+cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+			      struct wireless_dev *wdev,
+			      enum nl80211_iftype iftype)
+{
+	return cfg80211_can_use_iftype_chan(rdev, wdev, iftype, NULL,
+					    CHAN_MODE_UNDEFINED);
+}
 
 static inline int
 cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
@@ -439,6 +450,16 @@ cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
 	return cfg80211_can_change_interface(rdev, NULL, iftype);
 }
 
+static inline int
+cfg80211_can_use_chan(struct cfg80211_registered_device *rdev,
+		      struct wireless_dev *wdev,
+		      struct ieee80211_channel *chan,
+		      enum cfg80211_chan_mode chanmode)
+{
+	return cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype,
+					    chan, chanmode);
+}
+
 void
 cfg80211_get_chan_state(struct cfg80211_registered_device *rdev,
 		        struct wireless_dev *wdev,
@@ -461,6 +482,8 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
 			       enum nl80211_iftype iftype, int num);
 
+#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
+
 #ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
 #define CFG80211_DEV_WARN_ON(cond)	WARN_ON(cond)
 #else
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 9b92ec5..4713cea 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -938,13 +938,20 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 	return res;
 }
 
-int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
-				  struct wireless_dev *wdev,
-				  enum nl80211_iftype iftype)
+int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
+				 struct wireless_dev *wdev,
+				 enum nl80211_iftype iftype,
+				 struct ieee80211_channel *chan,
+				 enum cfg80211_chan_mode chanmode)
 {
 	struct wireless_dev *wdev_iter;
 	u32 used_iftypes = BIT(iftype);
 	int num[NUM_NL80211_IFTYPES];
+	struct ieee80211_channel
+			*used_channels[CFG80211_MAX_NUM_DIFFERENT_CHANNELS];
+	struct ieee80211_channel *ch;
+	enum cfg80211_chan_mode chmode;
+	int num_different_channels = 0;
 	int total = 1;
 	int i, j;
 
@@ -955,9 +962,23 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 		return 0;
 
 	memset(num, 0, sizeof(num));
+	memset(used_channels, 0, sizeof(used_channels));
 
 	num[iftype] = 1;
 
+	switch (chanmode) {
+	case CHAN_MODE_UNDEFINED:
+		break;
+	case CHAN_MODE_SHARED:
+		WARN_ON(!chan);
+		used_channels[0] = chan;
+		num_different_channels++;
+		break;
+	case CHAN_MODE_EXCLUSIVE:
+		num_different_channels++;
+		break;
+	}
+
 	mutex_lock(&rdev->devlist_mtx);
 	list_for_each_entry(wdev_iter, &rdev->netdev_list, list) {
 		if (wdev_iter == wdev)
@@ -968,6 +989,31 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
 			continue;
 
+		cfg80211_get_chan_state(rdev, wdev_iter, &ch, &chmode);
+
+		switch (chmode) {
+		case CHAN_MODE_UNDEFINED:
+			break;
+		case CHAN_MODE_SHARED:
+			for (i = 0; i < CFG80211_MAX_NUM_DIFFERENT_CHANNELS; i++)
+				if (!used_channels[i] || used_channels[i] == ch)
+					break;
+
+			if (i == CFG80211_MAX_NUM_DIFFERENT_CHANNELS) {
+				mutex_unlock(&rdev->devlist_mtx);
+				return -EBUSY;
+			}
+
+			if (used_channels[i] == NULL) {
+				used_channels[i] = ch;
+				num_different_channels++;
+			}
+			break;
+		case CHAN_MODE_EXCLUSIVE:
+			num_different_channels++;
+			break;
+		}
+
 		num[wdev_iter->iftype]++;
 		total++;
 		used_iftypes |= BIT(wdev_iter->iftype);
@@ -984,12 +1030,15 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 
 		c = &rdev->wiphy.iface_combinations[i];
 
+		if (total > c->max_interfaces)
+			continue;
+		if (num_different_channels > c->num_different_channels)
+			continue;
+
 		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
 				 GFP_KERNEL);
 		if (!limits)
 			return -ENOMEM;
-		if (total > c->max_interfaces)
-			goto cont;
 
 		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
 			if (rdev->wiphy.software_iftypes & BIT(iftype))
-- 
cgit v1.1


From e4e32459c2daea59516da59999706b357e6eb480 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:08 +0200
Subject: cfg80211: respect iface combinations when starting operation

devlist_mtx locking is changed to accomodate changes.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c    |  2 ++
 net/wireless/ibss.c    | 10 ++++++++++
 net/wireless/mesh.c    | 12 ++++++++++++
 net/wireless/mlme.c    | 16 ++++++++++++++++
 net/wireless/nl80211.c |  8 ++++++++
 net/wireless/util.c    |  9 ++++-----
 6 files changed, 52 insertions(+), 5 deletions(-)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index b26695a..ca2b95f 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -990,7 +990,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 			return notifier_from_errno(-EOPNOTSUPP);
 		if (rfkill_blocked(rdev->rfkill))
 			return notifier_from_errno(-ERFKILL);
+		mutex_lock(&rdev->devlist_mtx);
 		ret = cfg80211_can_add_interface(rdev, wdev->iftype);
+		mutex_unlock(&rdev->devlist_mtx);
 		if (ret)
 			return notifier_from_errno(ret);
 		cfg80211_lock_rdev(rdev);
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index b90fd86..ca5672f 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -118,6 +118,16 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
 	wdev->wext.ibss.channel = params->channel;
 #endif
 	wdev->sme_state = CFG80211_SME_CONNECTING;
+
+	err = cfg80211_can_use_chan(rdev, wdev, params->channel,
+				    params->channel_fixed
+				    ? CHAN_MODE_SHARED
+				    : CHAN_MODE_EXCLUSIVE);
+	if (err) {
+		wdev->connect_keys = NULL;
+		return err;
+	}
+
 	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
 	if (err) {
 		wdev->connect_keys = NULL;
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index bab3813..c384e77 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -155,6 +155,11 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 					  setup->channel_type))
 		return -EINVAL;
 
+	err = cfg80211_can_use_chan(rdev, wdev, setup->channel,
+				    CHAN_MODE_SHARED);
+	if (err)
+		return err;
+
 	err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
 	if (!err) {
 		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
@@ -173,9 +178,11 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err;
 
+	mutex_lock(&rdev->devlist_mtx);
 	wdev_lock(wdev);
 	err = __cfg80211_join_mesh(rdev, dev, setup, conf);
 	wdev_unlock(wdev);
+	mutex_unlock(&rdev->devlist_mtx);
 
 	return err;
 }
@@ -208,6 +215,11 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 		if (!netif_running(wdev->netdev))
 			return -ENETDOWN;
 
+		err = cfg80211_can_use_chan(rdev, wdev, channel,
+					    CHAN_MODE_SHARED);
+		if (err)
+			return err;
+
 		err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
 							   wdev->netdev,
 							   channel);
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index a7882eb..d4fece3 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -302,8 +302,14 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 	if (!req.bss)
 		return -ENOENT;
 
+	err = cfg80211_can_use_chan(rdev, wdev, req.bss->channel,
+				    CHAN_MODE_SHARED);
+	if (err)
+		goto out;
+
 	err = rdev->ops->auth(&rdev->wiphy, dev, &req);
 
+out:
 	cfg80211_put_bss(req.bss);
 	return err;
 }
@@ -317,11 +323,13 @@ int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 {
 	int err;
 
+	mutex_lock(&rdev->devlist_mtx);
 	wdev_lock(dev->ieee80211_ptr);
 	err = __cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid,
 				   ssid, ssid_len, ie, ie_len,
 				   key, key_len, key_idx);
 	wdev_unlock(dev->ieee80211_ptr);
+	mutex_unlock(&rdev->devlist_mtx);
 
 	return err;
 }
@@ -397,8 +405,14 @@ int __cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
 		return -ENOENT;
 	}
 
+	err = cfg80211_can_use_chan(rdev, wdev, req.bss->channel,
+				    CHAN_MODE_SHARED);
+	if (err)
+		goto out;
+
 	err = rdev->ops->assoc(&rdev->wiphy, dev, &req);
 
+out:
 	if (err) {
 		if (was_connected)
 			wdev->sme_state = CFG80211_SME_CONNECTED;
@@ -421,11 +435,13 @@ int cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err;
 
+	mutex_lock(&rdev->devlist_mtx);
 	wdev_lock(wdev);
 	err = __cfg80211_mlme_assoc(rdev, dev, chan, bssid, prev_bssid,
 				    ssid, ssid_len, ie, ie_len, use_mfp, crypt,
 				    assoc_flags, ht_capa, ht_capa_mask);
 	wdev_unlock(wdev);
+	mutex_unlock(&rdev->devlist_mtx);
 
 	return err;
 }
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5d29ed1..77102e6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2478,6 +2478,14 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 					  params.channel_type))
 		return -EINVAL;
 
+	mutex_lock(&rdev->devlist_mtx);
+	err = cfg80211_can_use_chan(rdev, wdev, params.channel,
+				    CHAN_MODE_SHARED);
+	mutex_unlock(&rdev->devlist_mtx);
+
+	if (err)
+		return err;
+
 	err = rdev->ops->start_ap(&rdev->wiphy, dev, &params);
 	if (!err) {
 		wdev->preset_chan = params.channel;
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 4713cea..a9260ac 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -805,8 +805,10 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		return -EBUSY;
 
 	if (ntype != otype && netif_running(dev)) {
+		mutex_lock(&rdev->devlist_mtx);
 		err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
 						    ntype);
+		mutex_unlock(&rdev->devlist_mtx);
 		if (err)
 			return err;
 
@@ -956,6 +958,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	int i, j;
 
 	ASSERT_RTNL();
+	lockdep_assert_held(&rdev->devlist_mtx);
 
 	/* Always allow software iftypes */
 	if (rdev->wiphy.software_iftypes & BIT(iftype))
@@ -979,7 +982,6 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 		break;
 	}
 
-	mutex_lock(&rdev->devlist_mtx);
 	list_for_each_entry(wdev_iter, &rdev->netdev_list, list) {
 		if (wdev_iter == wdev)
 			continue;
@@ -999,10 +1001,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 				if (!used_channels[i] || used_channels[i] == ch)
 					break;
 
-			if (i == CFG80211_MAX_NUM_DIFFERENT_CHANNELS) {
-				mutex_unlock(&rdev->devlist_mtx);
+			if (i == CFG80211_MAX_NUM_DIFFERENT_CHANNELS)
 				return -EBUSY;
-			}
 
 			if (used_channels[i] == NULL) {
 				used_channels[i] = ch;
@@ -1018,7 +1018,6 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 		total++;
 		used_iftypes |= BIT(wdev_iter->iftype);
 	}
-	mutex_unlock(&rdev->devlist_mtx);
 
 	if (total == 1)
 		return 0;
-- 
cgit v1.1


From d9b3b28b93812715dcee8e4eed8cb8d0707a45f8 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 28 Jun 2012 15:03:13 +0300
Subject: mac80211: allow calling ieee80211_ap_probereq_get() during auth/assoc

Drivers might need getting the probe request
(e.g. in order to extract the ssid) even during
auth/assoc.

Make ieee80211_ap_probereq_get() support it
by considering auth_data/assoc_data as well.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 398ce8e..e9c0d1b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1612,6 +1612,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
 {
 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct cfg80211_bss *cbss;
 	struct sk_buff *skb;
 	const u8 *ssid;
 	int ssid_len;
@@ -1621,16 +1622,22 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
 
 	ASSERT_MGD_MTX(ifmgd);
 
-	if (!ifmgd->associated)
+	if (ifmgd->associated)
+		cbss = ifmgd->associated;
+	else if (ifmgd->auth_data)
+		cbss = ifmgd->auth_data->bss;
+	else if (ifmgd->assoc_data)
+		cbss = ifmgd->assoc_data->bss;
+	else
 		return NULL;
 
-	ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+	ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
 	if (WARN_ON_ONCE(ssid == NULL))
 		ssid_len = 0;
 	else
 		ssid_len = ssid[1];
 
-	skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid,
+	skb = ieee80211_build_probe_req(sdata, cbss->bssid,
 					(u32) -1, ssid + 2, ssid_len,
 					NULL, 0, true);
 
-- 
cgit v1.1


From 3a0c52a6d82cc41da965284412608c74aece34e4 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 2 Jul 2012 09:32:32 +0300
Subject: cfg80211: add 802.11ad (60gHz band) support

Add enumerations for both cfg80211 and nl80211.
This expands wiphy.bands etc. arrays.

Extend channel <-> frequency translation to cover 60g band
and modify the rate check logic since there are no legacy
mandatory rates (only MCS is used.)

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlegacy/3945-rs.c |  2 +-
 include/linux/nl80211.h                 |  2 ++
 include/net/cfg80211.h                  |  2 ++
 net/mac80211/tx.c                       |  2 ++
 net/wireless/core.c                     | 10 ++++++++--
 net/wireless/util.c                     | 35 +++++++++++++++++++++++++--------
 6 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c
index 4b10157..d4fd29a 100644
--- a/drivers/net/wireless/iwlegacy/3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/3945-rs.c
@@ -946,7 +946,7 @@ il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 	case IEEE80211_BAND_5GHZ:
 		rs_sta->expected_tpt = il3945_expected_tpt_a;
 		break;
-	case IEEE80211_NUM_BANDS:
+	default:
 		BUG();
 		break;
 	}
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2300327..74cc55c 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2545,10 +2545,12 @@ enum nl80211_tx_rate_attributes {
  * enum nl80211_band - Frequency band
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
  */
 enum nl80211_band {
 	NL80211_BAND_2GHZ,
 	NL80211_BAND_5GHZ,
+	NL80211_BAND_60GHZ,
 };
 
 /**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index fa26934..0b564e8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -70,11 +70,13 @@
  *
  * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
  * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
+ * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
  * @IEEE80211_NUM_BANDS: number of defined bands
  */
 enum ieee80211_band {
 	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
 	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
+	IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
 
 	/* keep last */
 	IEEE80211_NUM_BANDS
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4e75303..4990f4f 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -140,6 +140,8 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
 			if (r->flags & IEEE80211_RATE_MANDATORY_A)
 				mrate = r->bitrate;
 			break;
+		case IEEE80211_BAND_60GHZ:
+			/* TODO, for now fall through */
 		case IEEE80211_NUM_BANDS:
 			WARN_ON(1);
 			break;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index ca2b95f..e13365f 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -468,8 +468,14 @@ int wiphy_register(struct wiphy *wiphy)
 			continue;
 
 		sband->band = band;
-
-		if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
+		if (WARN_ON(!sband->n_channels))
+			return -EINVAL;
+		/*
+		 * on 60gHz band, there are no legacy rates, so
+		 * n_bitrates is 0
+		 */
+		if (WARN_ON(band != IEEE80211_BAND_60GHZ &&
+			    !sband->n_bitrates))
 			return -EINVAL;
 
 		/*
diff --git a/net/wireless/util.c b/net/wireless/util.c
index a9260ac..0228c64 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -35,19 +35,29 @@ int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band)
 {
 	/* see 802.11 17.3.8.3.2 and Annex J
 	 * there are overlapping channel numbers in 5GHz and 2GHz bands */
-	if (band == IEEE80211_BAND_5GHZ) {
-		if (chan >= 182 && chan <= 196)
-			return 4000 + chan * 5;
-		else
-			return 5000 + chan * 5;
-	} else { /* IEEE80211_BAND_2GHZ */
+	if (chan <= 0)
+		return 0; /* not supported */
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
 		if (chan == 14)
 			return 2484;
 		else if (chan < 14)
 			return 2407 + chan * 5;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		if (chan >= 182 && chan <= 196)
+			return 4000 + chan * 5;
 		else
-			return 0; /* not supported */
+			return 5000 + chan * 5;
+		break;
+	case IEEE80211_BAND_60GHZ:
+		if (chan < 5)
+			return 56160 + chan * 2160;
+		break;
+	default:
+		;
 	}
+	return 0; /* not supported */
 }
 EXPORT_SYMBOL(ieee80211_channel_to_frequency);
 
@@ -60,8 +70,12 @@ int ieee80211_frequency_to_channel(int freq)
 		return (freq - 2407) / 5;
 	else if (freq >= 4910 && freq <= 4980)
 		return (freq - 4000) / 5;
-	else
+	else if (freq <= 45000) /* DMG band lower limit */
 		return (freq - 5000) / 5;
+	else if (freq >= 58320 && freq <= 64800)
+		return (freq - 56160) / 2160;
+	else
+		return 0;
 }
 EXPORT_SYMBOL(ieee80211_frequency_to_channel);
 
@@ -137,6 +151,11 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,
 		}
 		WARN_ON(want != 0 && want != 3 && want != 6);
 		break;
+	case IEEE80211_BAND_60GHZ:
+		/* check for mandatory HT MCS 1..4 */
+		WARN_ON(!sband->ht_cap.ht_supported);
+		WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e);
+		break;
 	case IEEE80211_NUM_BANDS:
 		WARN_ON(1);
 		break;
-- 
cgit v1.1


From 90cdc6df71c3716e660f7d99926d5f24b461c6cc Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 2 Jul 2012 09:32:34 +0300
Subject: wireless: regulatory for 60g

Add regulatory rule for the 60g band

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/reg.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index baf5704..b2b3222 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -129,7 +129,7 @@ static DECLARE_DELAYED_WORK(reg_timeout, reg_timeout_work);
 
 /* We keep a static world regulatory domain in case of the absence of CRDA */
 static const struct ieee80211_regdomain world_regdom = {
-	.n_reg_rules = 5,
+	.n_reg_rules = 6,
 	.alpha2 =  "00",
 	.reg_rules = {
 		/* IEEE 802.11b/g, channels 1..11 */
@@ -156,6 +156,9 @@ static const struct ieee80211_regdomain world_regdom = {
 		REG_RULE(5745-10, 5825+10, 40, 6, 20,
 			NL80211_RRF_PASSIVE_SCAN |
 			NL80211_RRF_NO_IBSS),
+
+		/* IEEE 802.11ad (60gHz), channels 1..3 */
+		REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0),
 	}
 };
 
-- 
cgit v1.1


From b188148c690e15284d5b20d384f950506d02e3e2 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 2 Jul 2012 09:32:35 +0300
Subject: wireless: 60g protocol constants

Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories

Introduce GCMP cipher, mandatory by 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 90 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 89 insertions(+), 1 deletion(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index abf0e5fe..e02fc68 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -47,6 +47,7 @@
 #define IEEE80211_FCTL_MOREDATA		0x2000
 #define IEEE80211_FCTL_PROTECTED	0x4000
 #define IEEE80211_FCTL_ORDER		0x8000
+#define IEEE80211_FCTL_CTL_EXT		0x0f00
 
 #define IEEE80211_SCTL_FRAG		0x000F
 #define IEEE80211_SCTL_SEQ		0xFFF0
@@ -54,6 +55,7 @@
 #define IEEE80211_FTYPE_MGMT		0x0000
 #define IEEE80211_FTYPE_CTL		0x0004
 #define IEEE80211_FTYPE_DATA		0x0008
+#define IEEE80211_FTYPE_EXT		0x000c
 
 /* management */
 #define IEEE80211_STYPE_ASSOC_REQ	0x0000
@@ -70,6 +72,7 @@
 #define IEEE80211_STYPE_ACTION		0x00D0
 
 /* control */
+#define IEEE80211_STYPE_CTL_EXT		0x0060
 #define IEEE80211_STYPE_BACK_REQ	0x0080
 #define IEEE80211_STYPE_BACK		0x0090
 #define IEEE80211_STYPE_PSPOLL		0x00A0
@@ -97,6 +100,18 @@
 #define IEEE80211_STYPE_QOS_CFPOLL		0x00E0
 #define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0
 
+/* extension, added by 802.11ad */
+#define IEEE80211_STYPE_DMG_BEACON		0x0000
+
+/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
+#define IEEE80211_CTL_EXT_POLL		0x2000
+#define IEEE80211_CTL_EXT_SPR		0x3000
+#define IEEE80211_CTL_EXT_GRANT	0x4000
+#define IEEE80211_CTL_EXT_DMG_CTS	0x5000
+#define IEEE80211_CTL_EXT_DMG_DTS	0x6000
+#define IEEE80211_CTL_EXT_SSW		0x8000
+#define IEEE80211_CTL_EXT_SSW_FBACK	0x9000
+#define IEEE80211_CTL_EXT_SSW_ACK	0xa000
 
 /* miscellaneous IEEE 802.11 constants */
 #define IEEE80211_MAX_FRAG_THRESHOLD	2352
@@ -1191,6 +1206,21 @@ struct ieee80211_vht_mcs_info {
 #define WLAN_CAPABILITY_QOS		(1<<9)
 #define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
 #define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
+
+/* DMG (60gHz) 802.11ad */
+/* type - bits 0..1 */
+#define WLAN_CAPABILITY_DMG_TYPE_IBSS		(1<<0) /* Tx by: STA */
+#define WLAN_CAPABILITY_DMG_TYPE_PBSS		(2<<0) /* Tx by: PCP */
+#define WLAN_CAPABILITY_DMG_TYPE_AP		(3<<0) /* Tx by: AP */
+
+#define WLAN_CAPABILITY_DMG_CBAP_ONLY		(1<<2)
+#define WLAN_CAPABILITY_DMG_CBAP_SOURCE	(1<<3)
+#define WLAN_CAPABILITY_DMG_PRIVACY		(1<<4)
+#define WLAN_CAPABILITY_DMG_ECPAC		(1<<5)
+
+#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT	(1<<8)
+#define WLAN_CAPABILITY_DMG_RADIO_MEASURE	(1<<12)
+
 /* measurement */
 #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
 #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
@@ -1200,7 +1230,6 @@ struct ieee80211_vht_mcs_info {
 #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
 
-
 /* 802.11g ERP information element */
 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
 #define WLAN_ERP_USE_PROTECTION (1<<1)
@@ -1212,6 +1241,16 @@ enum {
 	WLAN_ERP_PREAMBLE_LONG = 1,
 };
 
+/* Band ID, 802.11ad #8.4.1.45 */
+enum {
+	IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */
+	IEEE80211_BANDID_SUB1  = 1, /* Sub-1 GHz (excluding TV white spaces) */
+	IEEE80211_BANDID_2G    = 2, /* 2.4 GHz */
+	IEEE80211_BANDID_3G    = 3, /* 3.6 GHz */
+	IEEE80211_BANDID_5G    = 4, /* 4.9 and 5 GHz */
+	IEEE80211_BANDID_60G   = 5, /* 60 GHz */
+};
+
 /* Status codes */
 enum ieee80211_statuscode {
 	WLAN_STATUS_SUCCESS = 0,
@@ -1263,6 +1302,17 @@ enum ieee80211_statuscode {
 	WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
 	WLAN_STATUS_FCG_NOT_SUPP = 78,
 	WLAN_STATUS_STA_NO_TBTT = 78,
+	/* 802.11ad */
+	WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39,
+	WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47,
+	WLAN_STATUS_REJECT_WITH_SCHEDULE = 83,
+	WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86,
+	WLAN_STATUS_PERFORMING_FST_NOW = 87,
+	WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88,
+	WLAN_STATUS_REJECT_U_PID_SETTING = 89,
+	WLAN_STATUS_REJECT_DSE_BAND = 96,
+	WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
+	WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
 };
 
 
@@ -1422,6 +1472,40 @@ enum ieee80211_eid {
 
 	WLAN_EID_VHT_CAPABILITY = 191,
 	WLAN_EID_VHT_OPERATION = 192,
+
+	/* 802.11ad */
+	WLAN_EID_NON_TX_BSSID_CAP =  83,
+	WLAN_EID_WAKEUP_SCHEDULE = 143,
+	WLAN_EID_EXT_SCHEDULE = 144,
+	WLAN_EID_STA_AVAILABILITY = 145,
+	WLAN_EID_DMG_TSPEC = 146,
+	WLAN_EID_DMG_AT = 147,
+	WLAN_EID_DMG_CAP = 148,
+	WLAN_EID_DMG_OPERATION = 151,
+	WLAN_EID_DMG_BSS_PARAM_CHANGE = 152,
+	WLAN_EID_DMG_BEAM_REFINEMENT = 153,
+	WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154,
+	WLAN_EID_AWAKE_WINDOW = 157,
+	WLAN_EID_MULTI_BAND = 158,
+	WLAN_EID_ADDBA_EXT = 159,
+	WLAN_EID_NEXT_PCP_LIST = 160,
+	WLAN_EID_PCP_HANDOVER = 161,
+	WLAN_EID_DMG_LINK_MARGIN = 162,
+	WLAN_EID_SWITCHING_STREAM = 163,
+	WLAN_EID_SESSION_TRANSITION = 164,
+	WLAN_EID_DYN_TONE_PAIRING_REPORT = 165,
+	WLAN_EID_CLUSTER_REPORT = 166,
+	WLAN_EID_RELAY_CAP = 167,
+	WLAN_EID_RELAY_XFER_PARAM_SET = 168,
+	WLAN_EID_BEAM_LINK_MAINT = 169,
+	WLAN_EID_MULTIPLE_MAC_ADDR = 170,
+	WLAN_EID_U_PID = 171,
+	WLAN_EID_DMG_LINK_ADAPT_ACK = 172,
+	WLAN_EID_QUIET_PERIOD_REQ = 175,
+	WLAN_EID_QUIET_PERIOD_RESP = 177,
+	WLAN_EID_EPAC_POLICY = 182,
+	WLAN_EID_CLISTER_TIME_OFF = 183,
+	WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190,
 };
 
 /* Action category code */
@@ -1438,7 +1522,10 @@ enum ieee80211_category {
 	WLAN_CATEGORY_MESH_ACTION = 13,
 	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
 	WLAN_CATEGORY_SELF_PROTECTED = 15,
+	WLAN_CATEGORY_DMG = 16,
 	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_FST = 18,
+	WLAN_CATEGORY_UNPROT_DMG = 20,
 	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
 	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
 };
@@ -1686,6 +1773,7 @@ enum ieee80211_sa_query_action {
 #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
 #define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
+#define WLAN_CIPHER_SUITE_GCMP		0x000FAC08
 
 #define WLAN_CIPHER_SUITE_SMS4		0x00147201
 
-- 
cgit v1.1


From ba0afa2f22e1e3f332e45460f99328025d44564e Mon Sep 17 00:00:00 2001
From: Mahesh Palivela <maheshp@posedge.com>
Date: Mon, 2 Jul 2012 11:25:12 +0000
Subject: mac80211: include VHT capability IE in probe requests

Insert the VHT capability IE into probe requests.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h |  2 ++
 net/mac80211/main.c        |  8 +++++++-
 net/mac80211/util.c        | 25 +++++++++++++++++++++++++
 3 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b88bdfd..e0423f8 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1480,6 +1480,8 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
 			       enum nl80211_channel_type channel_type,
 			       u16 prot_mode);
+u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
+			       u32 cap);
 int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
 			    struct sk_buff *skb, bool need_basic);
 int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index aded001..ab32c59 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -688,7 +688,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	int result, i;
 	enum ieee80211_band band;
 	int channels, max_bitrates;
-	bool supp_ht;
+	bool supp_ht, supp_vht;
 	netdev_features_t feature_whitelist;
 	static const u32 cipher_suites[] = {
 		/* keep WEP first, it may be removed below */
@@ -732,6 +732,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	channels = 0;
 	max_bitrates = 0;
 	supp_ht = false;
+	supp_vht = false;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		struct ieee80211_supported_band *sband;
 
@@ -749,6 +750,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		if (max_bitrates < sband->n_bitrates)
 			max_bitrates = sband->n_bitrates;
 		supp_ht = supp_ht || sband->ht_cap.ht_supported;
+		supp_vht = supp_vht || sband->vht_cap.vht_supported;
 	}
 
 	local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
@@ -824,6 +826,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	if (supp_ht)
 		local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
 
+	if (supp_vht)
+		local->scan_ies_len +=
+			2 + sizeof(struct ieee80211_vht_capabilities);
+
 	if (!local->ops->hw_scan) {
 		/* For hw_scan, driver needs to set these up. */
 		local->hw.wiphy->max_scan_ssids = 4;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c424569..cb73a03 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1072,6 +1072,10 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
 		pos += noffset - offset;
 	}
 
+	if (sband->vht_cap.vht_supported)
+		pos = ieee80211_ie_build_vht_cap(pos, &sband->vht_cap,
+						 sband->vht_cap.cap);
+
 	return pos - buffer;
 }
 
@@ -1699,6 +1703,27 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 	return pos;
 }
 
+u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
+							   u32 cap)
+{
+	__le32 tmp;
+
+	*pos++ = WLAN_EID_VHT_CAPABILITY;
+	*pos++ = sizeof(struct ieee80211_vht_capabilities);
+	memset(pos, 0, sizeof(struct ieee80211_vht_capabilities));
+
+	/* capability flags */
+	tmp = cpu_to_le32(cap);
+	memcpy(pos, &tmp, sizeof(u32));
+	pos += sizeof(u32);
+
+	/* VHT MCS set */
+	memcpy(pos, &vht_cap->vht_mcs, sizeof(vht_cap->vht_mcs));
+	pos += sizeof(vht_cap->vht_mcs);
+
+	return pos;
+}
+
 u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
 			       enum nl80211_channel_type channel_type,
-- 
cgit v1.1


From cb831b537d50d21f6afb5dffbde4cf6523627461 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 2 Jul 2012 15:40:18 +0200
Subject: mac80211: remove tx_frags driver callback

The implementation of tx_frags is buggy due to
not handling queue stop, and there's no driver
implementing it so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h    | 15 ---------------
 net/mac80211/driver-ops.h |  8 --------
 net/mac80211/main.c       |  2 +-
 net/mac80211/tx.c         |  7 ++-----
 4 files changed, 3 insertions(+), 29 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b5da094..dc2a97a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1896,19 +1896,6 @@ enum ieee80211_rate_control_changed {
  *	The low-level driver should send the frame out based on
  *	configuration in the TX control data. This handler should,
  *	preferably, never fail and stop queues appropriately.
- *	This must be implemented if @tx_frags is not.
- *	Must be atomic.
- *
- * @tx_frags: Called to transmit multiple fragments of a single MSDU.
- *	This handler must consume all fragments, sending out some of
- *	them only is useless and it can't ask for some of them to be
- *	queued again. If the frame is not fragmented the queue has a
- *	single SKB only. To avoid issues with the networking stack
- *	when TX status is reported the frames should be removed from
- *	the skb queue.
- *	If this is used, the tx_info @vif and @sta pointers will be
- *	invalid -- you must not use them in that case.
- *	This must be implemented if @tx isn't.
  *	Must be atomic.
  *
  * @start: Called before the first netdevice attached to the hardware
@@ -2260,8 +2247,6 @@ enum ieee80211_rate_control_changed {
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
-	void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			 struct ieee80211_sta *sta, struct sk_buff_head *skbs);
 	int (*start)(struct ieee80211_hw *hw);
 	void (*stop)(struct ieee80211_hw *hw);
 #ifdef CONFIG_PM
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 44e8c12..5042151 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -27,14 +27,6 @@ static inline void drv_tx(struct ieee80211_local *local, struct sk_buff *skb)
 	local->ops->tx(&local->hw, skb);
 }
 
-static inline void drv_tx_frags(struct ieee80211_local *local,
-				struct ieee80211_vif *vif,
-				struct ieee80211_sta *sta,
-				struct sk_buff_head *skbs)
-{
-	local->ops->tx_frags(&local->hw, vif, sta, skbs);
-}
-
 static inline void drv_get_et_strings(struct ieee80211_sub_if_data *sdata,
 				      u32 sset, u8 *data)
 {
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index ab32c59..c794101 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -587,7 +587,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
 
-	BUG_ON(!ops->tx && !ops->tx_frags);
+	BUG_ON(!ops->tx);
 	BUG_ON(!ops->start);
 	BUG_ON(!ops->stop);
 	BUG_ON(!ops->config);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4990f4f..364a1e7 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1295,11 +1295,8 @@ static bool __ieee80211_tx(struct ieee80211_local *local,
 		break;
 	}
 
-	if (local->ops->tx_frags)
-		drv_tx_frags(local, vif, pubsta, skbs);
-	else
-		result = ieee80211_tx_frags(local, vif, pubsta, skbs,
-					    txpending);
+	result = ieee80211_tx_frags(local, vif, pubsta, skbs,
+				    txpending);
 
 	ieee80211_tpt_led_trig_tx(local, fc, led_len);
 	ieee80211_led_tx(local, 1);
-- 
cgit v1.1


From e3e1a0bcb3f192fe2f95f86a74bd4e7967341e74 Mon Sep 17 00:00:00 2001
From: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Date: Mon, 2 Jul 2012 19:46:16 +0200
Subject: mac80211: reduce IEEE80211_TX_MAX_RATES

IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there
is no current hardware supporting a rate chain with 5 multi
rate stages (mrr), so 4 mrr stages are sufficient.

The memory that is freed within the ieee80211_tx_info struct
will be used in the upcoming Transmission Power Control (TPC)
implementation.

Suggested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/carl9170/tx.c | 6 +++---
 drivers/net/wireless/p54/txrx.c        | 6 +++---
 include/net/mac80211.h                 | 8 ++++----
 net/mac80211/tx.c                      | 3 +--
 4 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index aed3051..ede0b57 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -277,11 +277,11 @@ static void carl9170_tx_release(struct kref *ref)
 		return;
 
 	BUILD_BUG_ON(
-	    offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+	    offsetof(struct ieee80211_tx_info, status.ack_signal) != 20);
 
-	memset(&txinfo->status.ampdu_ack_len, 0,
+	memset(&txinfo->status.ack_signal, 0,
 	       sizeof(struct ieee80211_tx_info) -
-	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+	       offsetof(struct ieee80211_tx_info, status.ack_signal));
 
 	if (atomic_read(&ar->tx_total_queued))
 		ar->tx_schedule = true;
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 82a1cac..f38786e 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -422,11 +422,11 @@ static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb)
 	 * Clear manually, ieee80211_tx_info_clear_status would
 	 * clear the counts too and we need them.
 	 */
-	memset(&info->status.ampdu_ack_len, 0,
+	memset(&info->status.ack_signal, 0,
 	       sizeof(struct ieee80211_tx_info) -
-	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+	       offsetof(struct ieee80211_tx_info, status.ack_signal));
 	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info,
-			      status.ampdu_ack_len) != 23);
+			      status.ack_signal) != 20);
 
 	if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
 		pad = entry_data->align[0];
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index dc2a97a..3f1b58c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -475,7 +475,7 @@ enum mac80211_rate_control_flags {
 #define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
 
 /* maximum number of rate stages */
-#define IEEE80211_TX_MAX_RATES	5
+#define IEEE80211_TX_MAX_RATES	4
 
 /**
  * struct ieee80211_tx_rate - rate selection/status
@@ -563,11 +563,11 @@ struct ieee80211_tx_info {
 		} control;
 		struct {
 			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
-			u8 ampdu_ack_len;
 			int ack_signal;
+			u8 ampdu_ack_len;
 			u8 ampdu_len;
 			u8 antenna;
-			/* 14 bytes free */
+			/* 21 bytes free */
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
@@ -634,7 +634,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
 		info->status.rates[i].count = 0;
 
 	BUILD_BUG_ON(
-	    offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+	    offsetof(struct ieee80211_tx_info, status.ack_signal) != 20);
 	memset(&info->status.ampdu_ack_len, 0,
 	       sizeof(struct ieee80211_tx_info) -
 	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 364a1e7..c9d2175 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -959,8 +959,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 			info->control.rates[1].idx = -1;
 			info->control.rates[2].idx = -1;
 			info->control.rates[3].idx = -1;
-			info->control.rates[4].idx = -1;
-			BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5);
+			BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4);
 			info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 		} else {
 			hdr->frame_control &= ~morefrags;
-- 
cgit v1.1


From 1b083ea4c072e49a6b0d4a1a6d5d9a6e4b3606b1 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 3 Jul 2012 13:14:49 +0200
Subject: mac80211_hwsim: fix NUM_BANDS usage

Due to the recent change of NUM_BANDS from 2 to 3 hwsim
broke. Fix the code by using the right constant but don't
support bands other than 2.4 and 5 GHz.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5bddf53..c68728c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -292,7 +292,7 @@ struct mac80211_hwsim_data {
 	struct list_head list;
 	struct ieee80211_hw *hw;
 	struct device *dev;
-	struct ieee80211_supported_band bands[2];
+	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 	struct ieee80211_channel channels_2ghz[ARRAY_SIZE(hwsim_channels_2ghz)];
 	struct ieee80211_channel channels_5ghz[ARRAY_SIZE(hwsim_channels_5ghz)];
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
@@ -1855,7 +1855,7 @@ static int __init init_mac80211_hwsim(void)
 				sband->n_bitrates = ARRAY_SIZE(hwsim_rates) - 4;
 				break;
 			default:
-				break;
+				continue;
 			}
 
 			sband->ht_cap.ht_supported = true;
-- 
cgit v1.1


From a1845fc7c552977e23fe552ad3f5c6c279e3d550 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 27 Jun 2012 13:18:36 +0200
Subject: mac80211: add TX prepare API

Some drivers require setup before being able to send
management frames in managed mode, in particular in
multi-channel cases.

Introduce API to allow the drivers to do such setup
while being able to sleep waiting for the setup to
finish in the device. This isn't possible inside the
TX call since that can't sleep.

A future patch may also restructure the TX retry to
wait for the driver to report the frame status, as
suggested by Arik in
http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.com

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h    | 15 +++++++++++++++
 net/mac80211/driver-ops.h | 14 ++++++++++++++
 net/mac80211/mlme.c       |  8 ++++++++
 net/mac80211/trace.h      |  7 +++++++
 4 files changed, 44 insertions(+)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3f1b58c..e3fa90c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2244,6 +2244,18 @@ enum ieee80211_rate_control_changed {
  * @get_rssi: Get current signal strength in dBm, the function is optional
  *	and can sleep.
  *
+ * @mgd_prepare_tx: Prepare for transmitting a management frame for association
+ *	before associated. In multi-channel scenarios, a virtual interface is
+ *	bound to a channel before it is associated, but as it isn't associated
+ *	yet it need not necessarily be given airtime, in particular since any
+ *	transmission to a P2P GO needs to be synchronized against the GO's
+ *	powersave state. mac80211 will call this function before transmitting a
+ *	management frame prior to having successfully associated to allow the
+ *	driver to give it channel time for the transmission, to get a response
+ *	and to be able to synchronize with the GO.
+ *	The callback will be called before each transmission and upon return
+ *	mac80211 will transmit the frame right away.
+ *	The callback is optional and can (should!) sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2383,6 +2395,9 @@ struct ieee80211_ops {
 				  u32 sset, u8 *data);
 	int	(*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, s8 *rssi_dbm);
+
+	void	(*mgd_prepare_tx)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif);
 };
 
 /**
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 5042151..df92031 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -852,4 +852,18 @@ static inline int drv_get_rssi(struct ieee80211_local *local,
 
 	return ret;
 }
+
+static inline void drv_mgd_prepare_tx(struct ieee80211_local *local,
+				      struct ieee80211_sub_if_data *sdata)
+{
+	might_sleep();
+
+	check_sdata_in_driver(sdata);
+	WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION);
+
+	trace_drv_mgd_prepare_tx(local, sdata);
+	if (local->ops->mgd_prepare_tx)
+		local->ops->mgd_prepare_tx(&local->hw, &sdata->vif);
+	trace_drv_return_void(local);
+}
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e9c0d1b..d563f7c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -541,6 +541,8 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		memcpy(pos, assoc_data->ie + offset, noffset - offset);
 	}
 
+	drv_mgd_prepare_tx(local, sdata);
+
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
 	ieee80211_tx_skb(sdata, skb);
 }
@@ -580,6 +582,9 @@ static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
 		if (!(ifmgd->flags & IEEE80211_STA_MFP_ENABLED))
 			IEEE80211_SKB_CB(skb)->flags |=
 				IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+		drv_mgd_prepare_tx(local, sdata);
+
 		ieee80211_tx_skb(sdata, skb);
 	}
 }
@@ -1756,6 +1761,7 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
 	if (!elems.challenge)
 		return;
 	auth_data->expected_transaction = 4;
+	drv_mgd_prepare_tx(sdata->local, sdata);
 	ieee80211_send_auth(sdata, 3, auth_data->algorithm,
 			    elems.challenge - 2, elems.challenge_len + 2,
 			    auth_data->bss->bssid, auth_data->bss->bssid,
@@ -2641,6 +2647,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 		return -ETIMEDOUT;
 	}
 
+	drv_mgd_prepare_tx(local, sdata);
+
 	if (auth_data->bss->proberesp_ies) {
 		sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
 			   auth_data->bss->bssid, auth_data->tries,
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 2e60f4a..e1e9d10 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1244,6 +1244,13 @@ TRACE_EVENT(drv_get_rssi,
 	)
 );
 
+DEFINE_EVENT(local_sdata_evt, drv_mgd_prepare_tx,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+
+	TP_ARGS(local, sdata)
+);
+
 /*
  * Tracing for API calls that drivers call.
  */
-- 
cgit v1.1


From c5a7e582490c423f0685e42ee5cfb7c6de81adb0 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 Jul 2012 13:28:18 +0200
Subject: cfg80211: fix locking regression in monitor channel tracking

Michal's monitor channel tracking introduce a locking problem
as it locked the rdev lock inside the netdev notifier which
isn't allowed as we might already hold it if we get there by
removing an interface that is up.

Fix this by relying only on the RTNL to protect the interface
counters, the RTNL is always held in these code paths anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c | 8 ++------
 net/wireless/core.h | 4 +++-
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index e13365f..eb60410 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -766,7 +766,7 @@ void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
 	bool has_monitors_only_old = cfg80211_has_monitors_only(rdev);
 	bool has_monitors_only_new;
 
-	ASSERT_RDEV_LOCK(rdev);
+	ASSERT_RTNL();
 
 	rdev->num_running_ifaces += num;
 	if (iftype == NL80211_IFTYPE_MONITOR)
@@ -888,10 +888,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		wdev->beacon_interval = 0;
 		break;
 	case NETDEV_DOWN:
-		dev_hold(dev);
-		cfg80211_lock_rdev(rdev);
 		cfg80211_update_iface_num(rdev, wdev->iftype, -1);
-		cfg80211_unlock_rdev(rdev);
+		dev_hold(dev);
 		queue_work(cfg80211_wq, &wdev->cleanup_work);
 		break;
 	case NETDEV_UP:
@@ -1001,9 +999,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		mutex_unlock(&rdev->devlist_mtx);
 		if (ret)
 			return notifier_from_errno(ret);
-		cfg80211_lock_rdev(rdev);
 		cfg80211_update_iface_num(rdev, wdev->iftype, 1);
-		cfg80211_unlock_rdev(rdev);
 		break;
 	}
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 81fef3d..377dc39 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -13,6 +13,7 @@
 #include <linux/debugfs.h>
 #include <linux/rfkill.h>
 #include <linux/workqueue.h>
+#include <linux/rtnetlink.h>
 #include <net/genetlink.h>
 #include <net/cfg80211.h>
 #include "reg.h"
@@ -56,6 +57,7 @@ struct cfg80211_registered_device {
 
 	u32 ap_beacons_nlpid;
 
+	/* protected by RTNL only */
 	int num_running_ifaces;
 	int num_running_monitor_ifaces;
 
@@ -205,7 +207,7 @@ static inline void wdev_unlock(struct wireless_dev *wdev)
 
 static inline bool cfg80211_has_monitors_only(struct cfg80211_registered_device *rdev)
 {
-	ASSERT_RDEV_LOCK(rdev);
+	ASSERT_RTNL();
 
 	return rdev->num_running_ifaces == rdev->num_running_monitor_ifaces &&
 	       rdev->num_running_ifaces > 0;
-- 
cgit v1.1


From 8eb41c8dfb9e2396d2452ada9023a83d610b9051 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 5 Jul 2012 14:25:49 +0300
Subject: {nl,cfg}80211: support high bitrates

Until now, a u16 value was used to represent bitrate value.
With VHT bitrates this becomes too small.

Introduce a new 32-bit bitrate attribute. nl80211 will report
both the new and the old attribute, unless the bitrate doesn't
fit into the old u16 attribute in which case only the new one
will be reported.

User space tools encouraged to prefer the 32-bit attribute, if
available (since it won't be available on older kernels.)

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
[reword commit message and comments a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h | 9 +++++++++
 include/net/cfg80211.h  | 2 +-
 net/wireless/nl80211.c  | 9 +++++++--
 net/wireless/util.c     | 2 +-
 4 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 74cc55c..db961a5 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1638,12 +1638,20 @@ struct nl80211_sta_flag_update {
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
  * when getting information about the bitrate of a station.
+ * There are 2 attributes for bitrate, a legacy one that represents
+ * a 16-bit value, and new one that represents a 32-bit value.
+ * If the rate value fits into 16 bit, both attributes are reported
+ * with the same value. If the rate is too high to fit into 16 bits
+ * (>6.5535Gbps) only 32-bit attribute is included.
+ * User space tools encouraged to use the 32-bit attribute and fall
+ * back to the 16-bit one for compatibility with older kernels.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
@@ -1653,6 +1661,7 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_MCS,
 	NL80211_RATE_INFO_40_MHZ_WIDTH,
 	NL80211_RATE_INFO_SHORT_GI,
+	NL80211_RATE_INFO_BITRATE32,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0b564e8..8837efc 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3487,7 +3487,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
  *
  * return 0 if MCS index >= 32
  */
-u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+u32 cfg80211_calculate_bitrate(struct rate_info *rate);
 
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 77102e6..2a5cdb6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2618,7 +2618,8 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
 				 int attr)
 {
 	struct nlattr *rate;
-	u16 bitrate;
+	u32 bitrate;
+	u16 bitrate_compat;
 
 	rate = nla_nest_start(msg, attr);
 	if (!rate)
@@ -2626,8 +2627,12 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
 
 	/* cfg80211_calculate_bitrate will return 0 for mcs >= 32 */
 	bitrate = cfg80211_calculate_bitrate(info);
+	/* report 16-bit bitrate only if we can */
+	bitrate_compat = bitrate < (1UL << 16) ? bitrate : 0;
 	if ((bitrate > 0 &&
-	     nla_put_u16(msg, NL80211_RATE_INFO_BITRATE, bitrate)) ||
+	     nla_put_u32(msg, NL80211_RATE_INFO_BITRATE32, bitrate)) ||
+	    (bitrate_compat > 0 &&
+	     nla_put_u16(msg, NL80211_RATE_INFO_BITRATE, bitrate_compat)) ||
 	    ((info->flags & RATE_INFO_FLAGS_MCS) &&
 	     nla_put_u8(msg, NL80211_RATE_INFO_MCS, info->mcs)) ||
 	    ((info->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) &&
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 0228c64..6e52726 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -900,7 +900,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 	return err;
 }
 
-u16 cfg80211_calculate_bitrate(struct rate_info *rate)
+u32 cfg80211_calculate_bitrate(struct rate_info *rate)
 {
 	int modulation, streams, bitrate;
 
-- 
cgit v1.1


From 95ddc1fc4519ed48ddc7d622bd5c84dff3eebb0a Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 5 Jul 2012 14:25:50 +0300
Subject: cfg80211: bitrate calculation for 60g

60g band uses different from .11n MCS scheme, so bitrate
should be calculated differently

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h |  2 ++
 net/wireless/util.c    | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 8837efc..51f67a9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -580,11 +580,13 @@ enum station_info_flags {
  * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
  * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ * @RATE_INFO_FLAGS_60G: 60gHz MCS
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS		= 1<<0,
 	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
 	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+	RATE_INFO_FLAGS_60G		= 1<<3,
 };
 
 /**
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6e52726..e31f1db 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -900,12 +900,61 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 	return err;
 }
 
+static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
+{
+	static const u32 __mcs2bitrate[] = {
+		/* control PHY */
+		[0] =   275,
+		/* SC PHY */
+		[1] =  3850,
+		[2] =  7700,
+		[3] =  9625,
+		[4] = 11550,
+		[5] = 12512, /* 1251.25 mbps */
+		[6] = 15400,
+		[7] = 19250,
+		[8] = 23100,
+		[9] = 25025,
+		[10] = 30800,
+		[11] = 38500,
+		[12] = 46200,
+		/* OFDM PHY */
+		[13] =  6930,
+		[14] =  8662, /* 866.25 mbps */
+		[15] = 13860,
+		[16] = 17325,
+		[17] = 20790,
+		[18] = 27720,
+		[19] = 34650,
+		[20] = 41580,
+		[21] = 45045,
+		[22] = 51975,
+		[23] = 62370,
+		[24] = 67568, /* 6756.75 mbps */
+		/* LP-SC PHY */
+		[25] =  6260,
+		[26] =  8340,
+		[27] = 11120,
+		[28] = 12510,
+		[29] = 16680,
+		[30] = 22240,
+		[31] = 25030,
+	};
+
+	if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
+		return 0;
+
+	return __mcs2bitrate[rate->mcs];
+}
+
 u32 cfg80211_calculate_bitrate(struct rate_info *rate)
 {
 	int modulation, streams, bitrate;
 
 	if (!(rate->flags & RATE_INFO_FLAGS_MCS))
 		return rate->legacy;
+	if (rate->flags & RATE_INFO_FLAGS_60G)
+		return cfg80211_calculate_bitrate_60g(rate);
 
 	/* the formula below does only work for MCS values smaller than 32 */
 	if (WARN_ON_ONCE(rate->mcs >= 32))
-- 
cgit v1.1


From 135792ec246ddd0b2738dd95447297ea0b91943b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 5 Jul 2012 21:37:05 +0200
Subject: mac80211: fix debugfs default key links

Due to the way the default key links are created,
it happens that a link is left dangling:
 * both unicast/multicast links are created
 * unicast link is destroyed, and the links
   are updated
 * during this update, adding the multicast
   link again fails because it is present,
   destroying the debugfs pointer
 * removing the multicast link won't work as
   the pointer has been destroyed

Fix this by always removing the links and then
re-creating them if needed.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Reported-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/debugfs_key.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 7932767..090d08f 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -283,6 +283,11 @@ void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 
 	lockdep_assert_held(&sdata->local->key_mtx);
 
+	if (sdata->debugfs.default_unicast_key) {
+		debugfs_remove(sdata->debugfs.default_unicast_key);
+		sdata->debugfs.default_unicast_key = NULL;
+	}
+
 	if (sdata->default_unicast_key) {
 		key = key_mtx_dereference(sdata->local,
 					  sdata->default_unicast_key);
@@ -290,9 +295,11 @@ void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 		sdata->debugfs.default_unicast_key =
 			debugfs_create_symlink("default_unicast_key",
 					       sdata->debugfs.dir, buf);
-	} else {
-		debugfs_remove(sdata->debugfs.default_unicast_key);
-		sdata->debugfs.default_unicast_key = NULL;
+	}
+
+	if (sdata->debugfs.default_multicast_key) {
+		debugfs_remove(sdata->debugfs.default_multicast_key);
+		sdata->debugfs.default_multicast_key = NULL;
 	}
 
 	if (sdata->default_multicast_key) {
@@ -302,9 +309,6 @@ void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 		sdata->debugfs.default_multicast_key =
 			debugfs_create_symlink("default_multicast_key",
 					       sdata->debugfs.dir, buf);
-	} else {
-		debugfs_remove(sdata->debugfs.default_multicast_key);
-		sdata->debugfs.default_multicast_key = NULL;
 	}
 }
 
-- 
cgit v1.1


From c62094889f7bb0b3343d5404c9d139d2fb1712bb Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 2 Jul 2012 15:08:25 +0300
Subject: mac80211: always set in_reconfig=false on wakeup

If the interfaces were removed just before a restart
work was started, open_count will be 0, and most of
the reconfig work will be skipped, including the
resetting of local->in_reconfig to false.

Leaving local->inconfig = true will result in
dropping any incoming packet.

Fix it by always setting local->in_reconfig = false
(even if there are no active interfaces).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index cb73a03..5715e7b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1415,10 +1415,10 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (ieee80211_sdata_running(sdata))
 			ieee80211_enable_keys(sdata);
 
+ wake_up:
 	local->in_reconfig = false;
 	barrier();
 
- wake_up:
 	/*
 	 * Clear the WLAN_STA_BLOCK_BA flag so new aggregation
 	 * sessions can be established after a resume.
-- 
cgit v1.1


From a6f38ac3cc853189705006cc1e0f17ce8467a1df Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 Jul 2012 12:49:59 +0200
Subject: mac80211: fix crash with single-queue drivers

Larry (and some others I think) reported that with
single-queue drivers mac80211 crashes when waking
the queues. This happens because we allocate just
a single queue for each virtual interface in case
the driver doesn't have at least 4 queues, but the
code stopping/waking the virtual interface queues
wasn't taking this into account.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/util.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 5715e7b..64493a7 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -268,6 +268,10 @@ EXPORT_SYMBOL(ieee80211_ctstoself_duration);
 void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue)
 {
 	struct ieee80211_sub_if_data *sdata;
+	int n_acs = IEEE80211_NUM_ACS;
+
+	if (local->hw.queues < IEEE80211_NUM_ACS)
+		n_acs = 1;
 
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		int ac;
@@ -279,7 +283,7 @@ void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue)
 		    local->queue_stop_reasons[sdata->vif.cab_queue] != 0)
 			continue;
 
-		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		for (ac = 0; ac < n_acs; ac++) {
 			int ac_queue = sdata->vif.hw_queue[ac];
 
 			if (ac_queue == queue ||
@@ -341,6 +345,7 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue,
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
+	int n_acs = IEEE80211_NUM_ACS;
 
 	trace_stop_queue(local, queue, reason);
 
@@ -352,11 +357,14 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue,
 
 	__set_bit(reason, &local->queue_stop_reasons[queue]);
 
+	if (local->hw.queues < IEEE80211_NUM_ACS)
+		n_acs = 1;
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		int ac;
 
-		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		for (ac = 0; ac < n_acs; ac++) {
 			if (sdata->vif.hw_queue[ac] == queue ||
 			    sdata->vif.cab_queue == queue)
 				netif_stop_subqueue(sdata->dev, ac);
-- 
cgit v1.1


From 4d6d0ae2a088e1e054ef6d96ceb1b41523291e71 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 Jul 2012 12:58:40 +0200
Subject: mac80211_hwsim: add testmode code to stop/wake queues

This was useful for debugging the queue stop/wake
issues and is pretty small so let's just put it in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index c68728c..3f38d84 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1082,6 +1082,8 @@ enum hwsim_testmode_attr {
 enum hwsim_testmode_cmd {
 	HWSIM_TM_CMD_SET_PS		= 0,
 	HWSIM_TM_CMD_GET_PS		= 1,
+	HWSIM_TM_CMD_STOP_QUEUES	= 2,
+	HWSIM_TM_CMD_WAKE_QUEUES	= 3,
 };
 
 static const struct nla_policy hwsim_testmode_policy[HWSIM_TM_ATTR_MAX + 1] = {
@@ -1121,6 +1123,12 @@ static int mac80211_hwsim_testmode_cmd(struct ieee80211_hw *hw,
 		if (nla_put_u32(skb, HWSIM_TM_ATTR_PS, hwsim->ps))
 			goto nla_put_failure;
 		return cfg80211_testmode_reply(skb);
+	case HWSIM_TM_CMD_STOP_QUEUES:
+		ieee80211_stop_queues(hw);
+		return 0;
+	case HWSIM_TM_CMD_WAKE_QUEUES:
+		ieee80211_wake_queues(hw);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
-- 
cgit v1.1