From 513527c87a7feab2a5b31db07e5b07864d3c08f7 Mon Sep 17 00:00:00 2001 From: Alan Liu Date: Tue, 26 Apr 2016 14:41:33 +0300 Subject: ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmware QCA6174 WLAN.RM.2.0 firmware uses max_tx_power instead of using max_reg_power to set transmission power. The tx power was about -50dbm, after applying this change, it become -32dbm. Signed-off-by: Alan Liu Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/wmi.c | 1 + drivers/net/wireless/ath/ath10k/wmi.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 621019f..39a54a5 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -1633,6 +1633,7 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, ch->max_power = arg->max_power; ch->reg_power = arg->max_reg_power; ch->antenna_max = arg->max_antenna_gain; + ch->max_tx_power = arg->max_power; /* mode & flags share storage */ ch->mode = arg->mode; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index db25535..fe36b2c 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1795,6 +1795,7 @@ struct wmi_channel { __le32 reginfo1; struct { u8 antenna_max; + u8 max_tx_power; } __packed; } __packed; } __packed; -- cgit v1.1 From 6dfdbfc78a2fb1a59680e9a1ee2f462cc768f386 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 26 Apr 2016 14:41:36 +0300 Subject: ath10k: fix a typo in ath10k_start() fix a typo (spelling mistake) in 'ath10k_start' Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 0e24f9e..de31eb6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4346,7 +4346,7 @@ static int ath10k_start(struct ieee80211_hw *hw) /* * This makes sense only when restarting hw. It is harmless to call - * uncoditionally. This is necessary to make sure no HTT/WMI tx + * unconditionally. This is necessary to make sure no HTT/WMI tx * commands will be submitted while restarting. */ ath10k_drain_tx(ar); -- cgit v1.1 From 907ec43a486df72891e79e1f47a718ee17e36ee2 Mon Sep 17 00:00:00 2001 From: Steve deRosier Date: Tue, 26 Apr 2016 14:41:37 +0300 Subject: ath6kl: fix missing uart debug pin for 6004 HW 3.0 For some reason, the 6004 HW 3.0 definition was missing the value for the uarttx_pin (used for firmware debug). This corrects this situation. Signed-off-by: Steve deRosier Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index da557dc..3daeb27 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -173,6 +173,7 @@ static const struct ath6kl_hw hw_list[] = { .reserved_ram_size = 7168, .board_addr = 0x436400, .testscript_addr = 0, + .uarttx_pin = 11, .flags = 0, .fw = { -- cgit v1.1 From f8a68c9668a63249d0105444101a99d9eccd7cc2 Mon Sep 17 00:00:00 2001 From: Steve deRosier Date: Tue, 26 Apr 2016 14:41:37 +0300 Subject: ath6kl: add ability to set debug uart baud rate It's useful to permit the customization of the debug uart baud rate. Enable this and send down the value to the chip if we're enabling debug. Signed-off-by: Steve deRosier Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/core.c | 3 +++ drivers/net/wireless/ath/ath6kl/core.h | 1 + drivers/net/wireless/ath/ath6kl/init.c | 8 ++++++++ 3 files changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath6kl/core.c b/drivers/net/wireless/ath/ath6kl/core.c index 4ec02ce..ebb9f16 100644 --- a/drivers/net/wireless/ath/ath6kl/core.c +++ b/drivers/net/wireless/ath/ath6kl/core.c @@ -31,6 +31,7 @@ unsigned int debug_mask; static unsigned int suspend_mode; static unsigned int wow_mode; static unsigned int uart_debug; +static unsigned int uart_rate = 115200; static unsigned int ath6kl_p2p; static unsigned int testmode; static unsigned int recovery_enable; @@ -40,6 +41,7 @@ module_param(debug_mask, uint, 0644); module_param(suspend_mode, uint, 0644); module_param(wow_mode, uint, 0644); module_param(uart_debug, uint, 0644); +module_param(uart_rate, uint, 0644); module_param(ath6kl_p2p, uint, 0644); module_param(testmode, uint, 0644); module_param(recovery_enable, uint, 0644); @@ -180,6 +182,7 @@ int ath6kl_core_init(struct ath6kl *ar, enum ath6kl_htc_type htc_type) if (uart_debug) ar->conf_flags |= ATH6KL_CONF_UART_DEBUG; + ar->hw.uarttx_rate = uart_rate; set_bit(FIRST_BOOT, &ar->flag); diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 713a571..7a1970e 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -781,6 +781,7 @@ struct ath6kl { u32 board_addr; u32 refclk_hz; u32 uarttx_pin; + u32 uarttx_rate; u32 testscript_addr; u8 tx_ant; u8 rx_ant; diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 3daeb27..58fb227 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -651,6 +651,14 @@ int ath6kl_configure_target(struct ath6kl *ar) if (status) return status; + /* Only set the baud rate if we're actually doing debug */ + if (ar->conf_flags & ATH6KL_CONF_UART_DEBUG) { + status = ath6kl_bmi_write_hi32(ar, hi_desired_baud_rate, + ar->hw.uarttx_rate); + if (status) + return status; + } + /* Configure target refclk_hz */ if (ar->hw.refclk_hz != 0) { status = ath6kl_bmi_write_hi32(ar, hi_refclk_hz, -- cgit v1.1 From 290206fa7e04ea4c1620aea2624e4d998bc27a0a Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Tue, 26 Apr 2016 14:41:38 +0300 Subject: wil6210: add function name to wil log macros Add __func__ to wil_err and wil_info for easier debugging. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/debug.c | 6 +++--- drivers/net/wireless/ath/wil6210/wil6210.h | 10 +++++++--- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/debug.c b/drivers/net/wireless/ath/wil6210/debug.c index 3249562..0a30127 100644 --- a/drivers/net/wireless/ath/wil6210/debug.c +++ b/drivers/net/wireless/ath/wil6210/debug.c @@ -17,7 +17,7 @@ #include "wil6210.h" #include "trace.h" -void wil_err(struct wil6210_priv *wil, const char *fmt, ...) +void __wil_err(struct wil6210_priv *wil, const char *fmt, ...) { struct net_device *ndev = wil_to_ndev(wil); struct va_format vaf = { @@ -32,7 +32,7 @@ void wil_err(struct wil6210_priv *wil, const char *fmt, ...) va_end(args); } -void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...) +void __wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...) { if (net_ratelimit()) { struct net_device *ndev = wil_to_ndev(wil); @@ -49,7 +49,7 @@ void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...) } } -void wil_info(struct wil6210_priv *wil, const char *fmt, ...) +void __wil_info(struct wil6210_priv *wil, const char *fmt, ...) { struct net_device *ndev = wil_to_ndev(wil); struct va_format vaf = { diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 4d699ea4..5dee909 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -635,11 +635,11 @@ struct wil6210_priv { __printf(2, 3) void wil_dbg_trace(struct wil6210_priv *wil, const char *fmt, ...); __printf(2, 3) -void wil_err(struct wil6210_priv *wil, const char *fmt, ...); +void __wil_err(struct wil6210_priv *wil, const char *fmt, ...); __printf(2, 3) -void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...); +void __wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...); __printf(2, 3) -void wil_info(struct wil6210_priv *wil, const char *fmt, ...); +void __wil_info(struct wil6210_priv *wil, const char *fmt, ...); #define wil_dbg(wil, fmt, arg...) do { \ netdev_dbg(wil_to_ndev(wil), fmt, ##arg); \ wil_dbg_trace(wil, fmt, ##arg); \ @@ -650,6 +650,10 @@ void wil_info(struct wil6210_priv *wil, const char *fmt, ...); #define wil_dbg_wmi(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg) #define wil_dbg_misc(wil, fmt, arg...) wil_dbg(wil, "DBG[MISC]" fmt, ##arg) #define wil_dbg_pm(wil, fmt, arg...) wil_dbg(wil, "DBG[ PM ]" fmt, ##arg) +#define wil_err(wil, fmt, arg...) __wil_err(wil, "%s: " fmt, __func__, ##arg) +#define wil_info(wil, fmt, arg...) __wil_info(wil, "%s: " fmt, __func__, ##arg) +#define wil_err_ratelimited(wil, fmt, arg...) \ + __wil_err_ratelimited(wil, "%s: " fmt, __func__, ##arg) /* target operations */ /* register read */ -- cgit v1.1 From 321a000bfadd5535089a198b42d714a8bf8469b7 Mon Sep 17 00:00:00 2001 From: Lior David Date: Tue, 26 Apr 2016 14:41:38 +0300 Subject: wil6210: support regular scan on P2P_DEVICE interface P2P search can only run on the social channel (channel 2). When issuing a scan request on the P2P_DEVICE interface, driver ignored the channels argument and always performed a P2P search. Fix this by checking the channels argument, if it is not specified (meaning full scan) or if a non-social channel was specified, perform a regular scan and not a P2P search. Signed-off-by: Lior David Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/cfg80211.c | 5 +++-- drivers/net/wireless/ath/wil6210/p2p.c | 6 ++++++ drivers/net/wireless/ath/wil6210/wil6210.h | 1 + 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 0fb3a79..5769811 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -375,8 +375,9 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, return -EBUSY; } - /* scan on P2P_DEVICE is handled as p2p search */ - if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE) { + /* social scan on P2P_DEVICE is handled as p2p search */ + if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE && + wil_p2p_is_social_scan(request)) { wil->scan_request = request; wil->radio_wdev = wdev; rc = wil_p2p_search(wil, request); diff --git a/drivers/net/wireless/ath/wil6210/p2p.c b/drivers/net/wireless/ath/wil6210/p2p.c index 2c1b895..1c91538 100644 --- a/drivers/net/wireless/ath/wil6210/p2p.c +++ b/drivers/net/wireless/ath/wil6210/p2p.c @@ -22,6 +22,12 @@ #define P2P_SEARCH_DURATION_MS 500 #define P2P_DEFAULT_BI 100 +bool wil_p2p_is_social_scan(struct cfg80211_scan_request *request) +{ + return (request->n_channels == 1) && + (request->channels[0]->hw_value == P2P_DMG_SOCIAL_CHANNEL); +} + void wil_p2p_discovery_timer_fn(ulong x) { struct wil6210_priv *wil = (void *)x; diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 5dee909..b6fc256 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -776,6 +776,7 @@ void wil_disable_irq(struct wil6210_priv *wil); void wil_enable_irq(struct wil6210_priv *wil); /* P2P */ +bool wil_p2p_is_social_scan(struct cfg80211_scan_request *request); void wil_p2p_discovery_timer_fn(ulong x); int wil_p2p_search(struct wil6210_priv *wil, struct cfg80211_scan_request *request); -- cgit v1.1 From b523d35b5bffda70bf149cb6ae87c7eb1013dcdd Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Tue, 26 Apr 2016 14:41:39 +0300 Subject: wil6210: change RX_HTRSH interrupt print level to debug When using interrupt moderation RX_HTRSH interrupt can occur frequently during high throughput and should not be considered as error. Such print-outs can degrade the performance hence should be printed in debug print level. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/interrupt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index fe66b2b..6897754 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -228,11 +228,8 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie) */ if (likely(isr & (BIT_DMA_EP_RX_ICR_RX_DONE | BIT_DMA_EP_RX_ICR_RX_HTRSH))) { - wil_dbg_irq(wil, "RX done\n"); - - if (unlikely(isr & BIT_DMA_EP_RX_ICR_RX_HTRSH)) - wil_err_ratelimited(wil, - "Received \"Rx buffer is in risk of overflow\" interrupt\n"); + wil_dbg_irq(wil, "RX done / RX_HTRSH received, ISR (0x%x)\n", + isr); isr &= ~(BIT_DMA_EP_RX_ICR_RX_DONE | BIT_DMA_EP_RX_ICR_RX_HTRSH); -- cgit v1.1 From d8ed043accdee611bce8be7c4224b4e26bdc2ab5 Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Tue, 26 Apr 2016 14:41:39 +0300 Subject: wil6210: print debug message when transmitting while disconnected Network stack can try to transmit data while AP / STA is disconnected. Change this print-out to debug level as this should not be handled as error. This patch also adds wil_dbg_ratelimited, used to limit the above print-out. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/debug.c | 16 ++++++++++++++++ drivers/net/wireless/ath/wil6210/txrx.c | 2 +- drivers/net/wireless/ath/wil6210/wil6210.h | 2 ++ 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wil6210/debug.c b/drivers/net/wireless/ath/wil6210/debug.c index 0a30127..c312a66 100644 --- a/drivers/net/wireless/ath/wil6210/debug.c +++ b/drivers/net/wireless/ath/wil6210/debug.c @@ -49,6 +49,22 @@ void __wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...) } } +void wil_dbg_ratelimited(const struct wil6210_priv *wil, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + if (!net_ratelimit()) + return; + + va_start(args, fmt); + vaf.fmt = fmt; + vaf.va = &args; + netdev_dbg(wil_to_ndev(wil), "%pV", &vaf); + trace_wil6210_log_dbg(&vaf); + va_end(args); +} + void __wil_info(struct wil6210_priv *wil, const char *fmt, ...) { struct net_device *ndev = wil_to_ndev(wil); diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index f260b232..a4e4379 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -1759,7 +1759,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) goto drop; } if (unlikely(!test_bit(wil_status_fwconnected, wil->status))) { - wil_err_ratelimited(wil, "FW not connected\n"); + wil_dbg_ratelimited(wil, "FW not connected, packet dropped\n"); goto drop; } if (unlikely(wil->wdev->iftype == NL80211_IFTYPE_MONITOR)) { diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index b6fc256..50acd13 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -640,6 +640,8 @@ __printf(2, 3) void __wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...); __printf(2, 3) void __wil_info(struct wil6210_priv *wil, const char *fmt, ...); +__printf(2, 3) +void wil_dbg_ratelimited(const struct wil6210_priv *wil, const char *fmt, ...); #define wil_dbg(wil, fmt, arg...) do { \ netdev_dbg(wil_to_ndev(wil), fmt, ##arg); \ wil_dbg_trace(wil, fmt, ##arg); \ -- cgit v1.1 From 54eaa8c69e72dca4c824cd390b616cb48b2c4e30 Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Tue, 26 Apr 2016 14:41:40 +0300 Subject: wil6210: unmask RX_HTRSH interrupt only when connected RX_HTRSH interrupt sometimes triggered during device reset procedure. To prevent handling this interrupt when not required, unmask this interrupt only if we are connected and mask it when disconnected. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/interrupt.c | 6 +++++- drivers/net/wireless/ath/wil6210/main.c | 17 +++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 6897754..22592f3 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -38,6 +38,8 @@ #define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL) #define WIL6210_IMC_RX (BIT_DMA_EP_RX_ICR_RX_DONE | \ BIT_DMA_EP_RX_ICR_RX_HTRSH) +#define WIL6210_IMC_RX_NO_RX_HTRSH (WIL6210_IMC_RX & \ + (~(BIT_DMA_EP_RX_ICR_RX_HTRSH))) #define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \ BIT_DMA_EP_TX_ICR_TX_DONE_N(0)) #define WIL6210_IMC_MISC (ISR_MISC_FW_READY | \ @@ -109,8 +111,10 @@ void wil6210_unmask_irq_tx(struct wil6210_priv *wil) void wil6210_unmask_irq_rx(struct wil6210_priv *wil) { + bool unmask_rx_htrsh = test_bit(wil_status_fwconnected, wil->status); + wil_w(wil, RGF_DMA_EP_RX_ICR + offsetof(struct RGF_ICR, IMC), - WIL6210_IMC_RX); + unmask_rx_htrsh ? WIL6210_IMC_RX : WIL6210_IMC_RX_NO_RX_HTRSH); } static void wil6210_unmask_irq_misc(struct wil6210_priv *wil) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 8d4e884..261bdab 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -194,6 +194,18 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock) memset(&sta->stats, 0, sizeof(sta->stats)); } +static bool wil_ap_is_connected(struct wil6210_priv *wil) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(wil->sta); i++) { + if (wil->sta[i].status == wil_sta_connected) + return true; + } + + return false; +} + static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid, u16 reason_code, bool from_event) { @@ -247,6 +259,11 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid, } clear_bit(wil_status_fwconnecting, wil->status); break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + if (!wil_ap_is_connected(wil)) + clear_bit(wil_status_fwconnected, wil->status); + break; default: break; } -- cgit v1.1 From 349214c1e7d718684e19dc3559dffe4e62f55296 Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Tue, 26 Apr 2016 14:41:41 +0300 Subject: wil6210: prevent deep sleep of 60G device in critical paths In idle times 60G device can enter deep sleep and turn off its XTAL clock. Host access triggers the device power-up flow which will hold the AHB during XTAL stabilization until device switches from slow-clock to XTAL clock. This behavior can stall the PCIe bus for some arbitrary period of time. In order to prevent this stall, host can vote for High Latency Access Policy (HALP) before reading from PCIe bus. This vote will wakeup the device from deep sleep and prevent deep sleep until unvote is done. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/debugfs.c | 22 +++++--- drivers/net/wireless/ath/wil6210/interrupt.c | 80 ++++++++++++++++++++++------ drivers/net/wireless/ath/wil6210/main.c | 75 ++++++++++++++++++++++++-- drivers/net/wireless/ath/wil6210/wil6210.h | 29 +++++++++- drivers/net/wireless/ath/wil6210/wmi.c | 20 +++++-- 5 files changed, 194 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c index b338a09..5d8823d 100644 --- a/drivers/net/wireless/ath/wil6210/debugfs.c +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -171,6 +171,8 @@ static void wil_print_ring(struct seq_file *s, const char *prefix, int rsize; uint i; + wil_halp_vote(wil); + wil_memcpy_fromio_32(&r, off, sizeof(r)); wil_mbox_ring_le2cpus(&r); /* @@ -236,6 +238,7 @@ static void wil_print_ring(struct seq_file *s, const char *prefix, } out: seq_puts(s, "}\n"); + wil_halp_unvote(wil); } static int wil_mbox_debugfs_show(struct seq_file *s, void *data) @@ -500,9 +503,9 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { enum { max_count = 4096 }; - struct debugfs_blob_wrapper *blob = file->private_data; + struct wil_blob_wrapper *wil_blob = file->private_data; loff_t pos = *ppos; - size_t available = blob->size; + size_t available = wil_blob->blob.size; void *buf; size_t ret; @@ -521,8 +524,9 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf, if (!buf) return -ENOMEM; - wil_memcpy_fromio_32(buf, (const volatile void __iomem *)blob->data + - pos, count); + wil_memcpy_fromio_halp_vote(wil_blob->wil, buf, + (const volatile void __iomem *) + wil_blob->blob.data + pos, count); ret = copy_to_user(user_buf, buf, count); kfree(buf); @@ -545,9 +549,9 @@ static struct dentry *wil_debugfs_create_ioblob(const char *name, umode_t mode, struct dentry *parent, - struct debugfs_blob_wrapper *blob) + struct wil_blob_wrapper *wil_blob) { - return debugfs_create_file(name, mode, parent, blob, &fops_ioblob); + return debugfs_create_file(name, mode, parent, wil_blob, &fops_ioblob); } /*---reset---*/ @@ -1445,16 +1449,18 @@ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil, char name[32]; for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) { - struct debugfs_blob_wrapper *blob = &wil->blobs[i]; + struct wil_blob_wrapper *wil_blob = &wil->blobs[i]; + struct debugfs_blob_wrapper *blob = &wil_blob->blob; const struct fw_map *map = &fw_mapping[i]; if (!map->name) continue; + wil_blob->wil = wil; blob->data = (void * __force)wil->csr + HOSTADDR(map->host); blob->size = map->to - map->from; snprintf(name, sizeof(name), "blob_%s", map->name); - wil_debugfs_create_ioblob(name, S_IRUGO, dbg, blob); + wil_debugfs_create_ioblob(name, S_IRUGO, dbg, wil_blob); } } diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 22592f3..011e741 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -35,17 +35,19 @@ * */ -#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL) +#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL) +#define WIL6210_IRQ_DISABLE_NO_HALP (0xF7FFFFFFUL) #define WIL6210_IMC_RX (BIT_DMA_EP_RX_ICR_RX_DONE | \ BIT_DMA_EP_RX_ICR_RX_HTRSH) #define WIL6210_IMC_RX_NO_RX_HTRSH (WIL6210_IMC_RX & \ (~(BIT_DMA_EP_RX_ICR_RX_HTRSH))) #define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \ BIT_DMA_EP_TX_ICR_TX_DONE_N(0)) -#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | \ - ISR_MISC_MBOX_EVT | \ - ISR_MISC_FW_ERROR) - +#define WIL6210_IMC_MISC_NO_HALP (ISR_MISC_FW_READY | \ + ISR_MISC_MBOX_EVT | \ + ISR_MISC_FW_ERROR) +#define WIL6210_IMC_MISC (WIL6210_IMC_MISC_NO_HALP | \ + BIT_DMA_EP_MISC_ICR_HALP) #define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \ BIT_DMA_PSEUDO_CAUSE_TX | \ BIT_DMA_PSEUDO_CAUSE_MISC)) @@ -53,6 +55,7 @@ #if defined(CONFIG_WIL6210_ISR_COR) /* configure to Clear-On-Read mode */ #define WIL_ICR_ICC_VALUE (0xFFFFFFFFUL) +#define WIL_ICR_ICC_MISC_VALUE (0xF7FFFFFFUL) static inline void wil_icr_clear(u32 x, void __iomem *addr) { @@ -60,6 +63,7 @@ static inline void wil_icr_clear(u32 x, void __iomem *addr) #else /* defined(CONFIG_WIL6210_ISR_COR) */ /* configure to Write-1-to-Clear mode */ #define WIL_ICR_ICC_VALUE (0UL) +#define WIL_ICR_ICC_MISC_VALUE (0UL) static inline void wil_icr_clear(u32 x, void __iomem *addr) { @@ -88,10 +92,21 @@ static void wil6210_mask_irq_rx(struct wil6210_priv *wil) WIL6210_IRQ_DISABLE); } -static void wil6210_mask_irq_misc(struct wil6210_priv *wil) +static void wil6210_mask_irq_misc(struct wil6210_priv *wil, bool mask_halp) { + wil_dbg_irq(wil, "%s: mask_halp(%s)\n", __func__, + mask_halp ? "true" : "false"); + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMS), - WIL6210_IRQ_DISABLE); + mask_halp ? WIL6210_IRQ_DISABLE : WIL6210_IRQ_DISABLE_NO_HALP); +} + +static void wil6210_mask_halp(struct wil6210_priv *wil) +{ + wil_dbg_irq(wil, "%s()\n", __func__); + + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMS), + BIT_DMA_EP_MISC_ICR_HALP); } static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil) @@ -117,10 +132,21 @@ void wil6210_unmask_irq_rx(struct wil6210_priv *wil) unmask_rx_htrsh ? WIL6210_IMC_RX : WIL6210_IMC_RX_NO_RX_HTRSH); } -static void wil6210_unmask_irq_misc(struct wil6210_priv *wil) +static void wil6210_unmask_irq_misc(struct wil6210_priv *wil, bool unmask_halp) { + wil_dbg_irq(wil, "%s: unmask_halp(%s)\n", __func__, + unmask_halp ? "true" : "false"); + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMC), - WIL6210_IMC_MISC); + unmask_halp ? WIL6210_IMC_MISC : WIL6210_IMC_MISC_NO_HALP); +} + +static void wil6210_unmask_halp(struct wil6210_priv *wil) +{ + wil_dbg_irq(wil, "%s()\n", __func__); + + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMC), + BIT_DMA_EP_MISC_ICR_HALP); } static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil) @@ -138,7 +164,7 @@ void wil_mask_irq(struct wil6210_priv *wil) wil6210_mask_irq_tx(wil); wil6210_mask_irq_rx(wil); - wil6210_mask_irq_misc(wil); + wil6210_mask_irq_misc(wil, true); wil6210_mask_irq_pseudo(wil); } @@ -151,12 +177,12 @@ void wil_unmask_irq(struct wil6210_priv *wil) wil_w(wil, RGF_DMA_EP_TX_ICR + offsetof(struct RGF_ICR, ICC), WIL_ICR_ICC_VALUE); wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICC), - WIL_ICR_ICC_VALUE); + WIL_ICR_ICC_MISC_VALUE); wil6210_unmask_irq_pseudo(wil); wil6210_unmask_irq_tx(wil); wil6210_unmask_irq_rx(wil); - wil6210_unmask_irq_misc(wil); + wil6210_unmask_irq_misc(wil, true); } void wil_configure_interrupt_moderation(struct wil6210_priv *wil) @@ -345,7 +371,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie) return IRQ_NONE; } - wil6210_mask_irq_misc(wil); + wil6210_mask_irq_misc(wil, false); if (isr & ISR_MISC_FW_ERROR) { u32 fw_assert_code = wil_r(wil, RGF_FW_ASSERT_CODE); @@ -373,12 +399,19 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie) isr &= ~ISR_MISC_FW_READY; } + if (isr & BIT_DMA_EP_MISC_ICR_HALP) { + wil_dbg_irq(wil, "%s: HALP IRQ invoked\n", __func__); + wil6210_mask_halp(wil); + isr &= ~BIT_DMA_EP_MISC_ICR_HALP; + complete(&wil->halp.comp); + } + wil->isr_misc = isr; if (isr) { return IRQ_WAKE_THREAD; } else { - wil6210_unmask_irq_misc(wil); + wil6210_unmask_irq_misc(wil, false); return IRQ_HANDLED; } } @@ -415,7 +448,7 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie) wil->isr_misc = 0; - wil6210_unmask_irq_misc(wil); + wil6210_unmask_irq_misc(wil, false); return IRQ_HANDLED; } @@ -557,6 +590,23 @@ void wil6210_clear_irq(struct wil6210_priv *wil) wmb(); /* make sure write completed */ } +void wil6210_set_halp(struct wil6210_priv *wil) +{ + wil_dbg_misc(wil, "%s()\n", __func__); + + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICS), + BIT_DMA_EP_MISC_ICR_HALP); +} + +void wil6210_clear_halp(struct wil6210_priv *wil) +{ + wil_dbg_misc(wil, "%s()\n", __func__); + + wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICR), + BIT_DMA_EP_MISC_ICR_HALP); + wil6210_unmask_halp(wil); +} + int wil6210_init_irq(struct wil6210_priv *wil, int irq, bool use_msi) { int rc; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 261bdab..f7ed651 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -23,6 +23,8 @@ #include "wmi.h" #include "boot_loader.h" +#define WAIT_FOR_HALP_VOTE_MS 100 + bool debug_fw; /* = false; */ module_param(debug_fw, bool, S_IRUGO); MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug"); @@ -132,6 +134,14 @@ void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src, *d++ = __raw_readl(s++); } +void wil_memcpy_fromio_halp_vote(struct wil6210_priv *wil, void *dst, + const volatile void __iomem *src, size_t count) +{ + wil_halp_vote(wil); + wil_memcpy_fromio_32(dst, src, count); + wil_halp_unvote(wil); +} + void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, size_t count) { @@ -142,6 +152,15 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, __raw_writel(*s++, d++); } +void wil_memcpy_toio_halp_vote(struct wil6210_priv *wil, + volatile void __iomem *dst, + const void *src, size_t count) +{ + wil_halp_vote(wil); + wil_memcpy_toio_32(dst, src, count); + wil_halp_unvote(wil); +} + static void wil_disconnect_cid(struct wil6210_priv *wil, int cid, u16 reason_code, bool from_event) __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock) @@ -474,9 +493,11 @@ int wil_priv_init(struct wil6210_priv *wil) mutex_init(&wil->wmi_mutex); mutex_init(&wil->probe_client_mutex); mutex_init(&wil->p2p_wdev_mutex); + mutex_init(&wil->halp.lock); init_completion(&wil->wmi_ready); init_completion(&wil->wmi_call); + init_completion(&wil->halp.comp); wil->bcast_vring = -1; setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil); @@ -572,11 +593,10 @@ static inline void wil_release_cpu(struct wil6210_priv *wil) static void wil_set_oob_mode(struct wil6210_priv *wil, bool enable) { wil_info(wil, "%s: enable=%d\n", __func__, enable); - if (enable) { + if (enable) wil_s(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE); - } else { + else wil_c(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE); - } } static int wil_target_reset(struct wil6210_priv *wil) @@ -888,6 +908,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) wil->ap_isolate = 0; reinit_completion(&wil->wmi_ready); reinit_completion(&wil->wmi_call); + reinit_completion(&wil->halp.comp); if (load_fw) { wil_configure_interrupt_moderation(wil); @@ -1078,3 +1099,51 @@ int wil_find_cid(struct wil6210_priv *wil, const u8 *mac) return rc; } + +void wil_halp_vote(struct wil6210_priv *wil) +{ + unsigned long rc; + unsigned long to_jiffies = msecs_to_jiffies(WAIT_FOR_HALP_VOTE_MS); + + mutex_lock(&wil->halp.lock); + + wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__, + wil->halp.ref_cnt); + + if (++wil->halp.ref_cnt == 1) { + wil6210_set_halp(wil); + rc = wait_for_completion_timeout(&wil->halp.comp, to_jiffies); + if (!rc) + wil_err(wil, "%s: HALP vote timed out\n", __func__); + else + wil_dbg_misc(wil, + "%s: HALP vote completed after %d ms\n", + __func__, + jiffies_to_msecs(to_jiffies - rc)); + } + + wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__, + wil->halp.ref_cnt); + + mutex_unlock(&wil->halp.lock); +} + +void wil_halp_unvote(struct wil6210_priv *wil) +{ + WARN_ON(wil->halp.ref_cnt == 0); + + mutex_lock(&wil->halp.lock); + + wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__, + wil->halp.ref_cnt); + + if (--wil->halp.ref_cnt == 0) { + wil6210_clear_halp(wil); + wil_dbg_misc(wil, "%s: HALP unvote\n", __func__); + } + + wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__, + wil->halp.ref_cnt); + + mutex_unlock(&wil->halp.lock); +} diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 50acd13..74bc2c5 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -168,6 +168,7 @@ struct RGF_ICR { #define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */ #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0) #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1) + #define BIT_DMA_EP_MISC_ICR_HALP BIT(27) #define BIT_DMA_EP_MISC_ICR_FW_INT(n) BIT(28+n) /* n = [0..3] */ /* Legacy interrupt moderation control (before Sparrow v2)*/ @@ -534,6 +535,17 @@ struct pmc_ctx { int descriptor_size; }; +struct wil_halp { + struct mutex lock; /* protect halp ref_cnt */ + unsigned int ref_cnt; + struct completion comp; +}; + +struct wil_blob_wrapper { + struct wil6210_priv *wil; + struct debugfs_blob_wrapper blob; +}; + struct wil6210_priv { struct pci_dev *pdev; struct wireless_dev *wdev; @@ -606,7 +618,7 @@ struct wil6210_priv { atomic_t isr_count_rx, isr_count_tx; /* debugfs */ struct dentry *debug; - struct debugfs_blob_wrapper blobs[ARRAY_SIZE(fw_mapping)]; + struct wil_blob_wrapper blobs[ARRAY_SIZE(fw_mapping)]; u8 discovery_mode; void *platform_handle; @@ -622,6 +634,10 @@ struct wil6210_priv { struct wireless_dev *p2p_wdev; struct mutex p2p_wdev_mutex; /* protect @p2p_wdev */ struct wireless_dev *radio_wdev; + + /* High Access Latency Policy voting */ + struct wil_halp halp; + }; #define wil_to_wiphy(i) (i->wdev->wiphy) @@ -713,6 +729,12 @@ void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src, size_t count); void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, size_t count); +void wil_memcpy_fromio_halp_vote(struct wil6210_priv *wil, void *dst, + const volatile void __iomem *src, + size_t count); +void wil_memcpy_toio_halp_vote(struct wil6210_priv *wil, + volatile void __iomem *dst, + const void *src, size_t count); void *wil_if_alloc(struct device *dev); void wil_if_free(struct wil6210_priv *wil); @@ -849,4 +871,9 @@ int wil_resume(struct wil6210_priv *wil, bool is_runtime); int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size); void wil_fw_core_dump(struct wil6210_priv *wil); +void wil_halp_vote(struct wil6210_priv *wil); +void wil_halp_unvote(struct wil6210_priv *wil); +void wil6210_set_halp(struct wil6210_priv *wil); +void wil6210_clear_halp(struct wil6210_priv *wil); + #endif /* __WIL6210_H__ */ diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 6ca28c3..2e347ef 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -194,6 +194,7 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) void __iomem *dst; void __iomem *head = wmi_addr(wil, r->head); uint retry; + int rc = 0; if (sizeof(cmd) + len > r->entry_size) { wil_err(wil, "WMI size too large: %d bytes, max is %d\n", @@ -212,6 +213,9 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head); return -EINVAL; } + + wil_halp_vote(wil); + /* read Tx head till it is not busy */ for (retry = 5; retry > 0; retry--) { wil_memcpy_fromio_32(&d_head, head, sizeof(d_head)); @@ -221,7 +225,8 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) } if (d_head.sync != 0) { wil_err(wil, "WMI head busy\n"); - return -EBUSY; + rc = -EBUSY; + goto out; } /* next head */ next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size); @@ -230,7 +235,8 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) for (retry = 5; retry > 0; retry--) { if (!test_bit(wil_status_fwready, wil->status)) { wil_err(wil, "WMI: cannot send command while FW not ready\n"); - return -EAGAIN; + rc = -EAGAIN; + goto out; } r->tail = wil_r(wil, RGF_MBOX + offsetof(struct wil6210_mbox_ctl, tx.tail)); @@ -240,13 +246,15 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) } if (next_head == r->tail) { wil_err(wil, "WMI ring full\n"); - return -EBUSY; + rc = -EBUSY; + goto out; } dst = wmi_buffer(wil, d_head.addr); if (!dst) { wil_err(wil, "invalid WMI buffer: 0x%08x\n", le32_to_cpu(d_head.addr)); - return -EINVAL; + rc = -EAGAIN; + goto out; } cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq); /* set command */ @@ -269,7 +277,9 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) wil_w(wil, RGF_USER_USER_ICR + offsetof(struct RGF_ICR, ICS), SW_INT_MBOX); - return 0; +out: + wil_halp_unvote(wil); + return rc; } int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) -- cgit v1.1 From 8527f68849caadd0b7c560c613f2e18c9e1f8d47 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 21 Apr 2016 14:09:42 -0700 Subject: wcn36xx: Set SMD timeout to 10 seconds After booting the wireless subsystem and uploading the NV blob to the WCNSS_CTRL service the remote continues to do things and will not start servicing wlan-requests for another 2-5 seconds (measured). The downstream code does not have any special handling for this case, but has a timeout of 10 seconds for the communication layer. By extending the wcn36xx timeout to match this we follows the same flow for the boot procedure and can successfully configure WiFi as wlan0 is registered. Signed-off-by: Bjorn Andersson Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wcn36xx/smd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h index d74d781..d93e3fd 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.h +++ b/drivers/net/wireless/ath/wcn36xx/smd.h @@ -24,7 +24,7 @@ #define WCN36XX_HAL_BUF_SIZE 4096 -#define HAL_MSG_TIMEOUT 500 +#define HAL_MSG_TIMEOUT 10000 #define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400 #define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200 /* The PNO version info be contained in the rsp msg */ -- cgit v1.1 From aae555d3026abcf6b7e4d29be2252dcc9ba10f49 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 25 Apr 2016 16:17:52 +0200 Subject: rtlwifi: rtl818x: Deinline indexed IO functions, save 21568 bytes rtl818x_ioread8_idx: 151 bytes, 29 calls rtl818x_ioread16_idx: 151 bytes, 11 calls rtl818x_ioread32_idx: 151 bytes, 5 calls rtl818x_iowrite8_idx: 157 bytes, 117 calls rtl818x_iowrite16_idx: 158 bytes, 74 calls rtl818x_iowrite32_idx: 157 bytes, 22 calls Each of these functions has a pair of mutex lock/unlock ops, both of these ops perform atomic updates of memory (on x86, it boils down to "lock cmpxchg %reg,mem" insn), which are 4-8 times more expensive than call+return. text data bss dec hex filename 95894242 20860288 35991552 152746082 91ab862 vmlinux_before 95872674 20860320 35991552 152724546 91a6442 vmlinux Signed-off-by: Denys Vlasenko CC: Larry Finger CC: Chaoming Li CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo --- .../net/wireless/realtek/rtl818x/rtl8187/rtl8187.h | 99 +++------------------- .../net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 93 ++++++++++++++++++++ 2 files changed, 105 insertions(+), 87 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h index a6ad79f..324451d 100644 --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h @@ -160,104 +160,40 @@ struct rtl8187_priv { void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); -static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, - u8 *addr, u8 idx) -{ - u8 val; - - mutex_lock(&priv->io_mutex); - usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), - RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); - - val = priv->io_dmabuf->bits8; - mutex_unlock(&priv->io_mutex); - - return val; -} +u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 idx); static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr) { return rtl818x_ioread8_idx(priv, addr, 0); } -static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, - __le16 *addr, u8 idx) -{ - __le16 val; - - mutex_lock(&priv->io_mutex); - usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), - RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); - - val = priv->io_dmabuf->bits16; - mutex_unlock(&priv->io_mutex); - - return le16_to_cpu(val); -} +u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, + __le16 *addr, u8 idx); static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr) { return rtl818x_ioread16_idx(priv, addr, 0); } -static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, - __le32 *addr, u8 idx) -{ - __le32 val; - - mutex_lock(&priv->io_mutex); - usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), - RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); - - val = priv->io_dmabuf->bits32; - mutex_unlock(&priv->io_mutex); - - return le32_to_cpu(val); -} +u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, + __le32 *addr, u8 idx); static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr) { return rtl818x_ioread32_idx(priv, addr, 0); } -static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, - u8 *addr, u8 val, u8 idx) -{ - mutex_lock(&priv->io_mutex); - - priv->io_dmabuf->bits8 = val; - usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), - RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); - - mutex_unlock(&priv->io_mutex); -} +void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 val, u8 idx); static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) { rtl818x_iowrite8_idx(priv, addr, val, 0); } -static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, - __le16 *addr, u16 val, u8 idx) -{ - mutex_lock(&priv->io_mutex); - - priv->io_dmabuf->bits16 = cpu_to_le16(val); - usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), - RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); - - mutex_unlock(&priv->io_mutex); -} +void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, + __le16 *addr, u16 val, u8 idx); static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, u16 val) @@ -265,19 +201,8 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, rtl818x_iowrite16_idx(priv, addr, val, 0); } -static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, - __le32 *addr, u32 val, u8 idx) -{ - mutex_lock(&priv->io_mutex); - - priv->io_dmabuf->bits32 = cpu_to_le32(val); - usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), - RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, - &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); - - mutex_unlock(&priv->io_mutex); -} +void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, + __le32 *addr, u32 val, u8 idx); static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr, u32 val) diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c index 5ecf18e..e6668ff 100644 --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c @@ -22,6 +22,99 @@ #include "rtl8187.h" #include "rtl8225.h" +u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 idx) +{ + u8 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits8; + mutex_unlock(&priv->io_mutex); + + return val; +} + +u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, + __le16 *addr, u8 idx) +{ + __le16 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits16; + mutex_unlock(&priv->io_mutex); + + return le16_to_cpu(val); +} + +u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, + __le32 *addr, u8 idx) +{ + __le32 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits32; + mutex_unlock(&priv->io_mutex); + + return le32_to_cpu(val); +} + +void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits8 = val; + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); +} + +void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, + __le16 *addr, u16 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = cpu_to_le16(val); + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); +} + +void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, + __le32 *addr, u32 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits32 = cpu_to_le32(val); + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); +} + static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data) { struct rtl8187_priv *priv = dev->priv; -- cgit v1.1 From 6c60e65cd0929f7ea853eb3e6de898c8d493655c Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:05 -0400 Subject: rtl8xxxu: Rename rtl8xxxu.c to rtl8xxxu_core.c This renames the core file to rtl8xxxu_core.c in order to allow us to keep the module nake rtl8xxxu.ko when refactoring the code into multiple files. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/Makefile | 2 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 10213 ------------------- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10213 +++++++++++++++++++ 3 files changed, 10215 insertions(+), 10213 deletions(-) delete mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index 5dea3bb..a6dfeee 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o + +rtl8xxxu-y := rtl8xxxu_core.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c deleted file mode 100644 index f2ce8c9..0000000 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ /dev/null @@ -1,10213 +0,0 @@ -/* - * RTL8XXXU mac80211 USB driver - * - * Copyright (c) 2014 - 2016 Jes Sorensen - * - * Portions, notably calibration code: - * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. - * - * This driver was written as a replacement for the vendor provided - * rtl8723au driver. As the Realtek 8xxx chips are very similar in - * their programming interface, I have started adding support for - * additional 8xxx chips like the 8192cu, 8188cus, etc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "rtl8xxxu.h" -#include "rtl8xxxu_regs.h" - -#define DRIVER_NAME "rtl8xxxu" - -static int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; -static bool rtl8xxxu_ht40_2g; - -MODULE_AUTHOR("Jes Sorensen "); -MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin"); -MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin"); - -module_param_named(debug, rtl8xxxu_debug, int, 0600); -MODULE_PARM_DESC(debug, "Set debug mask"); -module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600); -MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band"); - -#define USB_VENDOR_ID_REALTEK 0x0bda -/* Minimum IEEE80211_MAX_FRAME_LEN */ -#define RTL_RX_BUFFER_SIZE IEEE80211_MAX_FRAME_LEN -#define RTL8XXXU_RX_URBS 32 -#define RTL8XXXU_RX_URB_PENDING_WATER 8 -#define RTL8XXXU_TX_URBS 64 -#define RTL8XXXU_TX_URB_LOW_WATER 25 -#define RTL8XXXU_TX_URB_HIGH_WATER 32 - -static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rx_urb *rx_urb); - -static struct ieee80211_rate rtl8xxxu_rates[] = { - { .bitrate = 10, .hw_value = DESC_RATE_1M, .flags = 0 }, - { .bitrate = 20, .hw_value = DESC_RATE_2M, .flags = 0 }, - { .bitrate = 55, .hw_value = DESC_RATE_5_5M, .flags = 0 }, - { .bitrate = 110, .hw_value = DESC_RATE_11M, .flags = 0 }, - { .bitrate = 60, .hw_value = DESC_RATE_6M, .flags = 0 }, - { .bitrate = 90, .hw_value = DESC_RATE_9M, .flags = 0 }, - { .bitrate = 120, .hw_value = DESC_RATE_12M, .flags = 0 }, - { .bitrate = 180, .hw_value = DESC_RATE_18M, .flags = 0 }, - { .bitrate = 240, .hw_value = DESC_RATE_24M, .flags = 0 }, - { .bitrate = 360, .hw_value = DESC_RATE_36M, .flags = 0 }, - { .bitrate = 480, .hw_value = DESC_RATE_48M, .flags = 0 }, - { .bitrate = 540, .hw_value = DESC_RATE_54M, .flags = 0 }, -}; - -static struct ieee80211_channel rtl8xxxu_channels_2g[] = { - { .band = NL80211_BAND_2GHZ, .center_freq = 2412, - .hw_value = 1, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2417, - .hw_value = 2, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2422, - .hw_value = 3, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2427, - .hw_value = 4, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2432, - .hw_value = 5, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2437, - .hw_value = 6, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2442, - .hw_value = 7, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2447, - .hw_value = 8, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2452, - .hw_value = 9, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2457, - .hw_value = 10, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2462, - .hw_value = 11, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2467, - .hw_value = 12, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2472, - .hw_value = 13, .max_power = 30 }, - { .band = NL80211_BAND_2GHZ, .center_freq = 2484, - .hw_value = 14, .max_power = 30 } -}; - -static struct ieee80211_supported_band rtl8xxxu_supported_band = { - .channels = rtl8xxxu_channels_2g, - .n_channels = ARRAY_SIZE(rtl8xxxu_channels_2g), - .bitrates = rtl8xxxu_rates, - .n_bitrates = ARRAY_SIZE(rtl8xxxu_rates), -}; - -static struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { - {0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00}, - {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, - {0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00}, - {0x43a, 0x00}, {0x43b, 0x01}, {0x43c, 0x04}, {0x43d, 0x05}, - {0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01}, - {0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f}, - {0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72}, - {0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x462, 0x08}, - {0x463, 0x03}, {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, - {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, - {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, - {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, - {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, - {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, - {0x515, 0x10}, {0x516, 0x0a}, {0x517, 0x10}, {0x51a, 0x16}, - {0x524, 0x0f}, {0x525, 0x4f}, {0x546, 0x40}, {0x547, 0x00}, - {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55a, 0x02}, - {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, - {0x652, 0x20}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, - {0x63f, 0x0e}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, - {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, - {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff}, -}; - -static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { - {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, - {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, - {0x430, 0x00}, {0x431, 0x00}, - {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, - {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, - {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, - {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, - {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, - {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, - {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, - {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, - {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, - {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, - {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, - {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, - {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, - {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, - {0x516, 0x0a}, {0x525, 0x4f}, - {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, - {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, - {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, - {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, - {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, - {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, - {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, - {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, - {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, - {0xffff, 0xff}, -}; - -static struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = { - {0x011, 0xeb}, {0x012, 0x07}, {0x014, 0x75}, {0x303, 0xa7}, - {0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x00}, - {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, - {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, - {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, - {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, - {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, - {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, - {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, - {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, - {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff}, - {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f}, - {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e}, - {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e}, - {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00}, - {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a}, - {0x525, 0x4f}, {0x540, 0x12}, {0x541, 0x64}, {0x550, 0x10}, - {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, {0x55d, 0xff}, - {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff}, - {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff}, - {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x638, 0x50}, - {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e}, - {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xc8}, - {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, - {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65}, - {0x70b, 0x87}, - {0xffff, 0xff}, -}; - -#ifdef CONFIG_RTL8XXXU_UNTESTED -static struct rtl8xxxu_power_base rtl8188r_power_base = { - .reg_0e00 = 0x06080808, - .reg_0e04 = 0x00040406, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x04060608, - .reg_0e14 = 0x00020204, - .reg_0e18 = 0x04060608, - .reg_0e1c = 0x00020204, - - .reg_0830 = 0x06080808, - .reg_0834 = 0x00040406, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x04060608, - .reg_0848 = 0x00020204, - .reg_084c = 0x04060608, - .reg_0868 = 0x00020204, -}; - -static struct rtl8xxxu_power_base rtl8192c_power_base = { - .reg_0e00 = 0x07090c0c, - .reg_0e04 = 0x01020405, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x0b0c0c0e, - .reg_0e14 = 0x01030506, - .reg_0e18 = 0x0b0c0d0e, - .reg_0e1c = 0x01030509, - - .reg_0830 = 0x07090c0c, - .reg_0834 = 0x01020405, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x0b0c0d0e, - .reg_0848 = 0x01030509, - .reg_084c = 0x0b0c0d0e, - .reg_0868 = 0x01030509, -}; -#endif - -static struct rtl8xxxu_power_base rtl8723a_power_base = { - .reg_0e00 = 0x0a0c0c0c, - .reg_0e04 = 0x02040608, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x0a0c0d0e, - .reg_0e14 = 0x02040608, - .reg_0e18 = 0x0a0c0d0e, - .reg_0e1c = 0x02040608, - - .reg_0830 = 0x0a0c0c0c, - .reg_0834 = 0x02040608, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x0a0c0d0e, - .reg_0848 = 0x02040608, - .reg_084c = 0x0a0c0d0e, - .reg_0868 = 0x02040608, -}; - -static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { - {0x800, 0x80040000}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10001331}, {0x814, 0x020c3d10}, - {0x818, 0x02200385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00390004}, - {0x828, 0x00000000}, {0x82c, 0x00000000}, - {0x830, 0x00000000}, {0x834, 0x00000000}, - {0x838, 0x00000000}, {0x83c, 0x00000000}, - {0x840, 0x00010000}, {0x844, 0x00000000}, - {0x848, 0x00000000}, {0x84c, 0x00000000}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x569a569a}, {0x85c, 0x001b25a4}, - {0x860, 0x66f60110}, {0x864, 0x061f0130}, - {0x868, 0x00000000}, {0x86c, 0x32323200}, - {0x870, 0x07000760}, {0x874, 0x22004000}, - {0x878, 0x00000808}, {0x87c, 0x00000000}, - {0x880, 0xc0083070}, {0x884, 0x000004d5}, - {0x888, 0x00000000}, {0x88c, 0xccc000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x89c, 0x00706050}, - {0x900, 0x00000000}, {0x904, 0x00000023}, - {0x908, 0x00000000}, {0x90c, 0x81121111}, - {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c}, - {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f}, - {0xa10, 0x9500bb78}, {0xa14, 0x11144028}, - {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, - {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, - {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, - {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, - {0xa78, 0x00000900}, - {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, - {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, - {0xc10, 0x08800000}, {0xc14, 0x40000100}, - {0xc18, 0x08800000}, {0xc1c, 0x40000100}, - {0xc20, 0x00000000}, {0xc24, 0x00000000}, - {0xc28, 0x00000000}, {0xc2c, 0x00000000}, - {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, - {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, - {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, - {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, - {0xc50, 0x69543420}, {0xc54, 0x43bc0094}, - {0xc58, 0x69543420}, {0xc5c, 0x433c0094}, - {0xc60, 0x00000000}, {0xc64, 0x7112848b}, - {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, - {0xc70, 0x2c7f000d}, {0xc74, 0x018610db}, - {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, - {0xc80, 0x40000100}, {0xc84, 0x20f60000}, - {0xc88, 0x40000100}, {0xc8c, 0x20200000}, - {0xc90, 0x00121820}, {0xc94, 0x00000000}, - {0xc98, 0x00121820}, {0xc9c, 0x00007f7f}, - {0xca0, 0x00000000}, {0xca4, 0x00000080}, - {0xca8, 0x00000000}, {0xcac, 0x00000000}, - {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, - {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, - {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, - {0xcc8, 0x00000000}, {0xccc, 0x00000000}, - {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, - {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, - {0xce0, 0x00222222}, {0xce4, 0x00000000}, - {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, - {0xd00, 0x00080740}, {0xd04, 0x00020401}, - {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, - {0xd10, 0xa0633333}, {0xd14, 0x3333bc43}, - {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00027293}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000000}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a}, - {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a}, - {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a}, - {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a}, - {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, - {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, - {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, - {0xe44, 0x01004800}, {0xe48, 0xfb000000}, - {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, - {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, - {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, - {0xe68, 0x001b25a4}, {0xe6c, 0x631b25a0}, - {0xe70, 0x631b25a0}, {0xe74, 0x081b25a0}, - {0xe78, 0x081b25a0}, {0xe7c, 0x081b25a0}, - {0xe80, 0x081b25a0}, {0xe84, 0x631b25a0}, - {0xe88, 0x081b25a0}, {0xe8c, 0x631b25a0}, - {0xed0, 0x631b25a0}, {0xed4, 0x631b25a0}, - {0xed8, 0x631b25a0}, {0xedc, 0x001b25a0}, - {0xee0, 0x001b25a0}, {0xeec, 0x6b1b25a0}, - {0xf14, 0x00000003}, {0xf4c, 0x00000000}, - {0xf00, 0x00000300}, - {0xffff, 0xffffffff}, -}; - -static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { - {0x800, 0x80040000}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10001331}, {0x814, 0x020c3d10}, - {0x818, 0x02200385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00190204}, - {0x828, 0x00000000}, {0x82c, 0x00000000}, - {0x830, 0x00000000}, {0x834, 0x00000000}, - {0x838, 0x00000000}, {0x83c, 0x00000000}, - {0x840, 0x00010000}, {0x844, 0x00000000}, - {0x848, 0x00000000}, {0x84c, 0x00000000}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x569a11a9}, {0x85c, 0x01000014}, - {0x860, 0x66f60110}, {0x864, 0x061f0649}, - {0x868, 0x00000000}, {0x86c, 0x27272700}, - {0x870, 0x07000760}, {0x874, 0x25004000}, - {0x878, 0x00000808}, {0x87c, 0x00000000}, - {0x880, 0xb0000c1c}, {0x884, 0x00000001}, - {0x888, 0x00000000}, {0x88c, 0xccc000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x89c, 0x00706050}, - {0x900, 0x00000000}, {0x904, 0x00000023}, - {0x908, 0x00000000}, {0x90c, 0x81121111}, - {0x910, 0x00000002}, {0x914, 0x00000201}, - {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, - {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, - {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, - {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, - {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, - {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, - {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, - {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, - {0xa80, 0x21806490}, {0xb2c, 0x00000000}, - {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, - {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, - {0xc10, 0x08800000}, {0xc14, 0x40000100}, - {0xc18, 0x08800000}, {0xc1c, 0x40000100}, - {0xc20, 0x00000000}, {0xc24, 0x00000000}, - {0xc28, 0x00000000}, {0xc2c, 0x00000000}, - {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, - {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, - {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, - {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, - {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, - {0xc58, 0x00013149}, {0xc5c, 0x00250492}, - {0xc60, 0x00000000}, {0xc64, 0x7112848b}, - {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, - {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, - {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, - {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, - {0xc88, 0x40000100}, {0xc8c, 0x20200000}, - {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, - {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, - {0xca0, 0x00000000}, {0xca4, 0x000300a0}, - {0xca8, 0x00000000}, {0xcac, 0x00000000}, - {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, - {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, - {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, - {0xcc8, 0x00000000}, {0xccc, 0x00000000}, - {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, - {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, - {0xce0, 0x00222222}, {0xce4, 0x00000000}, - {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, - {0xd00, 0x00000740}, {0xd04, 0x40020401}, - {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, - {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, - {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00127353}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000282}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, - {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, - {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, - {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, - {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, - {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, - {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, - {0xe44, 0x01004800}, {0xe48, 0xfb000000}, - {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, - {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, - {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, - {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, - {0xe70, 0x00c00096}, {0xe74, 0x01000056}, - {0xe78, 0x01000014}, {0xe7c, 0x01000056}, - {0xe80, 0x01000014}, {0xe84, 0x00c00096}, - {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, - {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, - {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, - {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, - {0xf14, 0x00000003}, {0xf4c, 0x00000000}, - {0xf00, 0x00000300}, - {0x820, 0x01000100}, {0x800, 0x83040000}, - {0xffff, 0xffffffff}, -}; - -static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = { - {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, - {0x800, 0x80040002}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10000330}, {0x814, 0x020c3d10}, - {0x818, 0x02200385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00390004}, - {0x828, 0x01000100}, {0x82c, 0x00390004}, - {0x830, 0x27272727}, {0x834, 0x27272727}, - {0x838, 0x27272727}, {0x83c, 0x27272727}, - {0x840, 0x00010000}, {0x844, 0x00010000}, - {0x848, 0x27272727}, {0x84c, 0x27272727}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x569a569a}, {0x85c, 0x0c1b25a4}, - {0x860, 0x66e60230}, {0x864, 0x061f0130}, - {0x868, 0x27272727}, {0x86c, 0x2b2b2b27}, - {0x870, 0x07000700}, {0x874, 0x22184000}, - {0x878, 0x08080808}, {0x87c, 0x00000000}, - {0x880, 0xc0083070}, {0x884, 0x000004d5}, - {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x89c, 0x00706050}, - {0x900, 0x00000000}, {0x904, 0x00000023}, - {0x908, 0x00000000}, {0x90c, 0x81121313}, - {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c}, - {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f}, - {0xa10, 0x9500bb78}, {0xa14, 0x11144028}, - {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, - {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, - {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, - {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, - {0xc00, 0x48071d40}, {0xc04, 0x03a05633}, - {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, - {0xc10, 0x08800000}, {0xc14, 0x40000100}, - {0xc18, 0x08800000}, {0xc1c, 0x40000100}, - {0xc20, 0x00000000}, {0xc24, 0x00000000}, - {0xc28, 0x00000000}, {0xc2c, 0x00000000}, - {0xc30, 0x69e9ac44}, {0xc34, 0x469652cf}, - {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, - {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, - {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, - {0xc50, 0x69543420}, {0xc54, 0x43bc0094}, - {0xc58, 0x69543420}, {0xc5c, 0x433c0094}, - {0xc60, 0x00000000}, {0xc64, 0x5116848b}, - {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, - {0xc70, 0x2c7f000d}, {0xc74, 0x2186115b}, - {0xc78, 0x0000001f}, {0xc7c, 0x00b99612}, - {0xc80, 0x40000100}, {0xc84, 0x20f60000}, - {0xc88, 0x40000100}, {0xc8c, 0xa0e40000}, - {0xc90, 0x00121820}, {0xc94, 0x00000000}, - {0xc98, 0x00121820}, {0xc9c, 0x00007f7f}, - {0xca0, 0x00000000}, {0xca4, 0x00000080}, - {0xca8, 0x00000000}, {0xcac, 0x00000000}, - {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, - {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, - {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, - {0xcc8, 0x00000000}, {0xccc, 0x00000000}, - {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, - {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, - {0xce0, 0x00222222}, {0xce4, 0x00000000}, - {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, - {0xd00, 0x00080740}, {0xd04, 0x00020403}, - {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, - {0xd10, 0xa0633333}, {0xd14, 0x3333bc43}, - {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00027293}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000000}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a}, - {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a}, - {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a}, - {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a}, - {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, - {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, - {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, - {0xe44, 0x01004800}, {0xe48, 0xfb000000}, - {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, - {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, - {0xe5c, 0x28160d05}, {0xe60, 0x00000010}, - {0xe68, 0x001b25a4}, {0xe6c, 0x63db25a4}, - {0xe70, 0x63db25a4}, {0xe74, 0x0c1b25a4}, - {0xe78, 0x0c1b25a4}, {0xe7c, 0x0c1b25a4}, - {0xe80, 0x0c1b25a4}, {0xe84, 0x63db25a4}, - {0xe88, 0x0c1b25a4}, {0xe8c, 0x63db25a4}, - {0xed0, 0x63db25a4}, {0xed4, 0x63db25a4}, - {0xed8, 0x63db25a4}, {0xedc, 0x001b25a4}, - {0xee0, 0x001b25a4}, {0xeec, 0x6fdb25a4}, - {0xf14, 0x00000003}, {0xf4c, 0x00000000}, - {0xf00, 0x00000300}, - {0xffff, 0xffffffff}, -}; - -static struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = { - {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, - {0x040, 0x000c0004}, {0x800, 0x80040000}, - {0x804, 0x00000001}, {0x808, 0x0000fc00}, - {0x80c, 0x0000000a}, {0x810, 0x10005388}, - {0x814, 0x020c3d10}, {0x818, 0x02200385}, - {0x81c, 0x00000000}, {0x820, 0x01000100}, - {0x824, 0x00390204}, {0x828, 0x00000000}, - {0x82c, 0x00000000}, {0x830, 0x00000000}, - {0x834, 0x00000000}, {0x838, 0x00000000}, - {0x83c, 0x00000000}, {0x840, 0x00010000}, - {0x844, 0x00000000}, {0x848, 0x00000000}, - {0x84c, 0x00000000}, {0x850, 0x00000000}, - {0x854, 0x00000000}, {0x858, 0x569a569a}, - {0x85c, 0x001b25a4}, {0x860, 0x66e60230}, - {0x864, 0x061f0130}, {0x868, 0x00000000}, - {0x86c, 0x20202000}, {0x870, 0x03000300}, - {0x874, 0x22004000}, {0x878, 0x00000808}, - {0x87c, 0x00ffc3f1}, {0x880, 0xc0083070}, - {0x884, 0x000004d5}, {0x888, 0x00000000}, - {0x88c, 0xccc000c0}, {0x890, 0x00000800}, - {0x894, 0xfffffffe}, {0x898, 0x40302010}, - {0x89c, 0x00706050}, {0x900, 0x00000000}, - {0x904, 0x00000023}, {0x908, 0x00000000}, - {0x90c, 0x81121111}, {0xa00, 0x00d047c8}, - {0xa04, 0x80ff000c}, {0xa08, 0x8c838300}, - {0xa0c, 0x2e68120f}, {0xa10, 0x9500bb78}, - {0xa14, 0x11144028}, {0xa18, 0x00881117}, - {0xa1c, 0x89140f00}, {0xa20, 0x15160000}, - {0xa24, 0x070b0f12}, {0xa28, 0x00000104}, - {0xa2c, 0x00d30000}, {0xa70, 0x101fbf00}, - {0xa74, 0x00000007}, {0xc00, 0x48071d40}, - {0xc04, 0x03a05611}, {0xc08, 0x000000e4}, - {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, - {0xc14, 0x40000100}, {0xc18, 0x08800000}, - {0xc1c, 0x40000100}, {0xc20, 0x00000000}, - {0xc24, 0x00000000}, {0xc28, 0x00000000}, - {0xc2c, 0x00000000}, {0xc30, 0x69e9ac44}, - {0xc34, 0x469652cf}, {0xc38, 0x49795994}, - {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, - {0xc44, 0x000100b7}, {0xc48, 0xec020107}, - {0xc4c, 0x007f037f}, {0xc50, 0x6954342e}, - {0xc54, 0x43bc0094}, {0xc58, 0x6954342f}, - {0xc5c, 0x433c0094}, {0xc60, 0x00000000}, - {0xc64, 0x5116848b}, {0xc68, 0x47c00bff}, - {0xc6c, 0x00000036}, {0xc70, 0x2c46000d}, - {0xc74, 0x018610db}, {0xc78, 0x0000001f}, - {0xc7c, 0x00b91612}, {0xc80, 0x24000090}, - {0xc84, 0x20f60000}, {0xc88, 0x24000090}, - {0xc8c, 0x20200000}, {0xc90, 0x00121820}, - {0xc94, 0x00000000}, {0xc98, 0x00121820}, - {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, - {0xca4, 0x00000080}, {0xca8, 0x00000000}, - {0xcac, 0x00000000}, {0xcb0, 0x00000000}, - {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, - {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, - {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, - {0xccc, 0x00000000}, {0xcd0, 0x00000000}, - {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, - {0xcdc, 0x00766932}, {0xce0, 0x00222222}, - {0xce4, 0x00000000}, {0xce8, 0x37644302}, - {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, - {0xd04, 0x00020401}, {0xd08, 0x0000907f}, - {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, - {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, - {0xd2c, 0xcc979975}, {0xd30, 0x00000000}, - {0xd34, 0x80608000}, {0xd38, 0x00000000}, - {0xd3c, 0x00027293}, {0xd40, 0x00000000}, - {0xd44, 0x00000000}, {0xd48, 0x00000000}, - {0xd4c, 0x00000000}, {0xd50, 0x6437140a}, - {0xd54, 0x00000000}, {0xd58, 0x00000000}, - {0xd5c, 0x30032064}, {0xd60, 0x4653de68}, - {0xd64, 0x04518a3c}, {0xd68, 0x00002101}, - {0xd6c, 0x2a201c16}, {0xd70, 0x1812362e}, - {0xd74, 0x322c2220}, {0xd78, 0x000e3c24}, - {0xe00, 0x24242424}, {0xe04, 0x24242424}, - {0xe08, 0x03902024}, {0xe10, 0x24242424}, - {0xe14, 0x24242424}, {0xe18, 0x24242424}, - {0xe1c, 0x24242424}, {0xe28, 0x00000000}, - {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, - {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, - {0xe40, 0x01007c00}, {0xe44, 0x01004800}, - {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, - {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, - {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, - {0xe60, 0x00000008}, {0xe68, 0x001b25a4}, - {0xe6c, 0x631b25a0}, {0xe70, 0x631b25a0}, - {0xe74, 0x081b25a0}, {0xe78, 0x081b25a0}, - {0xe7c, 0x081b25a0}, {0xe80, 0x081b25a0}, - {0xe84, 0x631b25a0}, {0xe88, 0x081b25a0}, - {0xe8c, 0x631b25a0}, {0xed0, 0x631b25a0}, - {0xed4, 0x631b25a0}, {0xed8, 0x631b25a0}, - {0xedc, 0x001b25a0}, {0xee0, 0x001b25a0}, - {0xeec, 0x6b1b25a0}, {0xee8, 0x31555448}, - {0xf14, 0x00000003}, {0xf4c, 0x00000000}, - {0xf00, 0x00000300}, - {0xffff, 0xffffffff}, -}; - -static struct rtl8xxxu_reg32val rtl8192eu_phy_init_table[] = { - {0x800, 0x80040000}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10001331}, {0x814, 0x020c3d10}, - {0x818, 0x02220385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00390204}, - {0x828, 0x01000100}, {0x82c, 0x00390204}, - {0x830, 0x32323232}, {0x834, 0x30303030}, - {0x838, 0x30303030}, {0x83c, 0x30303030}, - {0x840, 0x00010000}, {0x844, 0x00010000}, - {0x848, 0x28282828}, {0x84c, 0x28282828}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x009a009a}, {0x85c, 0x01000014}, - {0x860, 0x66f60000}, {0x864, 0x061f0000}, - {0x868, 0x30303030}, {0x86c, 0x30303030}, - {0x870, 0x00000000}, {0x874, 0x55004200}, - {0x878, 0x08080808}, {0x87c, 0x00000000}, - {0x880, 0xb0000c1c}, {0x884, 0x00000001}, - {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x900, 0x00000000}, - {0x904, 0x00000023}, {0x908, 0x00000000}, - {0x90c, 0x81121313}, {0x910, 0x806c0001}, - {0x914, 0x00000001}, {0x918, 0x00000000}, - {0x91c, 0x00010000}, {0x924, 0x00000001}, - {0x928, 0x00000000}, {0x92c, 0x00000000}, - {0x930, 0x00000000}, {0x934, 0x00000000}, - {0x938, 0x00000000}, {0x93c, 0x00000000}, - {0x940, 0x00000000}, {0x944, 0x00000000}, - {0x94c, 0x00000008}, {0xa00, 0x00d0c7c8}, - {0xa04, 0x81ff000c}, {0xa08, 0x8c838300}, - {0xa0c, 0x2e68120f}, {0xa10, 0x95009b78}, - {0xa14, 0x1114d028}, {0xa18, 0x00881117}, - {0xa1c, 0x89140f00}, {0xa20, 0x1a1b0000}, - {0xa24, 0x090e1317}, {0xa28, 0x00000204}, - {0xa2c, 0x00d30000}, {0xa70, 0x101fff00}, - {0xa74, 0x00000007}, {0xa78, 0x00000900}, - {0xa7c, 0x225b0606}, {0xa80, 0x218075b1}, - {0xb38, 0x00000000}, {0xc00, 0x48071d40}, - {0xc04, 0x03a05633}, {0xc08, 0x000000e4}, - {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, - {0xc14, 0x40000100}, {0xc18, 0x08800000}, - {0xc1c, 0x40000100}, {0xc20, 0x00000000}, - {0xc24, 0x00000000}, {0xc28, 0x00000000}, - {0xc2c, 0x00000000}, {0xc30, 0x69e9ac47}, - {0xc34, 0x469652af}, {0xc38, 0x49795994}, - {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, - {0xc44, 0x000100b7}, {0xc48, 0xec020107}, - {0xc4c, 0x007f037f}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc50, 0x00340220}, -#else - {0xc50, 0x00340020}, -#endif - {0xc54, 0x0080801f}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc58, 0x00000220}, -#else - {0xc58, 0x00000020}, -#endif - {0xc5c, 0x00248492}, {0xc60, 0x00000000}, - {0xc64, 0x7112848b}, {0xc68, 0x47c00bff}, - {0xc6c, 0x00000036}, {0xc70, 0x00000600}, - {0xc74, 0x02013169}, {0xc78, 0x0000001f}, - {0xc7c, 0x00b91612}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc80, 0x2d4000b5}, -#else - {0xc80, 0x40000100}, -#endif - {0xc84, 0x21f60000}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc88, 0x2d4000b5}, -#else - {0xc88, 0x40000100}, -#endif - {0xc8c, 0xa0e40000}, {0xc90, 0x00121820}, - {0xc94, 0x00000000}, {0xc98, 0x00121820}, - {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, - {0xca4, 0x000300a0}, {0xca8, 0x00000000}, - {0xcac, 0x00000000}, {0xcb0, 0x00000000}, - {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, - {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, - {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, - {0xccc, 0x00000000}, {0xcd0, 0x00000000}, - {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, - {0xcdc, 0x00766932}, {0xce0, 0x00222222}, - {0xce4, 0x00040000}, {0xce8, 0x77644302}, - {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, - {0xd04, 0x00020403}, {0xd08, 0x0000907f}, - {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, - {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, - {0xd1c, 0x0000007f}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00127353}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000282}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xd80, 0x01081008}, - {0xd84, 0x00000800}, {0xd88, 0xf0b50000}, - {0xe00, 0x30303030}, {0xe04, 0x30303030}, - {0xe08, 0x03903030}, {0xe10, 0x30303030}, - {0xe14, 0x30303030}, {0xe18, 0x30303030}, - {0xe1c, 0x30303030}, {0xe28, 0x00000000}, - {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, - {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, - {0xe40, 0x01007c00}, {0xe44, 0x01004800}, - {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, - {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, - {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, - {0xe60, 0x00000008}, {0xe68, 0x0fc05656}, - {0xe6c, 0x03c09696}, {0xe70, 0x03c09696}, - {0xe74, 0x0c005656}, {0xe78, 0x0c005656}, - {0xe7c, 0x0c005656}, {0xe80, 0x0c005656}, - {0xe84, 0x03c09696}, {0xe88, 0x0c005656}, - {0xe8c, 0x03c09696}, {0xed0, 0x03c09696}, - {0xed4, 0x03c09696}, {0xed8, 0x03c09696}, - {0xedc, 0x0000d6d6}, {0xee0, 0x0000d6d6}, - {0xeec, 0x0fc01616}, {0xee4, 0xb0000c1c}, - {0xee8, 0x00000001}, {0xf14, 0x00000003}, - {0xf4c, 0x00000000}, {0xf00, 0x00000300}, - {0xffff, 0xffffffff}, -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = { - {0xc78, 0x7b000001}, {0xc78, 0x7b010001}, - {0xc78, 0x7b020001}, {0xc78, 0x7b030001}, - {0xc78, 0x7b040001}, {0xc78, 0x7b050001}, - {0xc78, 0x7a060001}, {0xc78, 0x79070001}, - {0xc78, 0x78080001}, {0xc78, 0x77090001}, - {0xc78, 0x760a0001}, {0xc78, 0x750b0001}, - {0xc78, 0x740c0001}, {0xc78, 0x730d0001}, - {0xc78, 0x720e0001}, {0xc78, 0x710f0001}, - {0xc78, 0x70100001}, {0xc78, 0x6f110001}, - {0xc78, 0x6e120001}, {0xc78, 0x6d130001}, - {0xc78, 0x6c140001}, {0xc78, 0x6b150001}, - {0xc78, 0x6a160001}, {0xc78, 0x69170001}, - {0xc78, 0x68180001}, {0xc78, 0x67190001}, - {0xc78, 0x661a0001}, {0xc78, 0x651b0001}, - {0xc78, 0x641c0001}, {0xc78, 0x631d0001}, - {0xc78, 0x621e0001}, {0xc78, 0x611f0001}, - {0xc78, 0x60200001}, {0xc78, 0x49210001}, - {0xc78, 0x48220001}, {0xc78, 0x47230001}, - {0xc78, 0x46240001}, {0xc78, 0x45250001}, - {0xc78, 0x44260001}, {0xc78, 0x43270001}, - {0xc78, 0x42280001}, {0xc78, 0x41290001}, - {0xc78, 0x402a0001}, {0xc78, 0x262b0001}, - {0xc78, 0x252c0001}, {0xc78, 0x242d0001}, - {0xc78, 0x232e0001}, {0xc78, 0x222f0001}, - {0xc78, 0x21300001}, {0xc78, 0x20310001}, - {0xc78, 0x06320001}, {0xc78, 0x05330001}, - {0xc78, 0x04340001}, {0xc78, 0x03350001}, - {0xc78, 0x02360001}, {0xc78, 0x01370001}, - {0xc78, 0x00380001}, {0xc78, 0x00390001}, - {0xc78, 0x003a0001}, {0xc78, 0x003b0001}, - {0xc78, 0x003c0001}, {0xc78, 0x003d0001}, - {0xc78, 0x003e0001}, {0xc78, 0x003f0001}, - {0xc78, 0x7b400001}, {0xc78, 0x7b410001}, - {0xc78, 0x7b420001}, {0xc78, 0x7b430001}, - {0xc78, 0x7b440001}, {0xc78, 0x7b450001}, - {0xc78, 0x7a460001}, {0xc78, 0x79470001}, - {0xc78, 0x78480001}, {0xc78, 0x77490001}, - {0xc78, 0x764a0001}, {0xc78, 0x754b0001}, - {0xc78, 0x744c0001}, {0xc78, 0x734d0001}, - {0xc78, 0x724e0001}, {0xc78, 0x714f0001}, - {0xc78, 0x70500001}, {0xc78, 0x6f510001}, - {0xc78, 0x6e520001}, {0xc78, 0x6d530001}, - {0xc78, 0x6c540001}, {0xc78, 0x6b550001}, - {0xc78, 0x6a560001}, {0xc78, 0x69570001}, - {0xc78, 0x68580001}, {0xc78, 0x67590001}, - {0xc78, 0x665a0001}, {0xc78, 0x655b0001}, - {0xc78, 0x645c0001}, {0xc78, 0x635d0001}, - {0xc78, 0x625e0001}, {0xc78, 0x615f0001}, - {0xc78, 0x60600001}, {0xc78, 0x49610001}, - {0xc78, 0x48620001}, {0xc78, 0x47630001}, - {0xc78, 0x46640001}, {0xc78, 0x45650001}, - {0xc78, 0x44660001}, {0xc78, 0x43670001}, - {0xc78, 0x42680001}, {0xc78, 0x41690001}, - {0xc78, 0x406a0001}, {0xc78, 0x266b0001}, - {0xc78, 0x256c0001}, {0xc78, 0x246d0001}, - {0xc78, 0x236e0001}, {0xc78, 0x226f0001}, - {0xc78, 0x21700001}, {0xc78, 0x20710001}, - {0xc78, 0x06720001}, {0xc78, 0x05730001}, - {0xc78, 0x04740001}, {0xc78, 0x03750001}, - {0xc78, 0x02760001}, {0xc78, 0x01770001}, - {0xc78, 0x00780001}, {0xc78, 0x00790001}, - {0xc78, 0x007a0001}, {0xc78, 0x007b0001}, - {0xc78, 0x007c0001}, {0xc78, 0x007d0001}, - {0xc78, 0x007e0001}, {0xc78, 0x007f0001}, - {0xc78, 0x3800001e}, {0xc78, 0x3801001e}, - {0xc78, 0x3802001e}, {0xc78, 0x3803001e}, - {0xc78, 0x3804001e}, {0xc78, 0x3805001e}, - {0xc78, 0x3806001e}, {0xc78, 0x3807001e}, - {0xc78, 0x3808001e}, {0xc78, 0x3c09001e}, - {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e}, - {0xc78, 0x440c001e}, {0xc78, 0x480d001e}, - {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e}, - {0xc78, 0x5210001e}, {0xc78, 0x5611001e}, - {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e}, - {0xc78, 0x6014001e}, {0xc78, 0x6015001e}, - {0xc78, 0x6016001e}, {0xc78, 0x6217001e}, - {0xc78, 0x6218001e}, {0xc78, 0x6219001e}, - {0xc78, 0x621a001e}, {0xc78, 0x621b001e}, - {0xc78, 0x621c001e}, {0xc78, 0x621d001e}, - {0xc78, 0x621e001e}, {0xc78, 0x621f001e}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { - {0xc78, 0x7b000001}, {0xc78, 0x7b010001}, - {0xc78, 0x7b020001}, {0xc78, 0x7b030001}, - {0xc78, 0x7b040001}, {0xc78, 0x7b050001}, - {0xc78, 0x7b060001}, {0xc78, 0x7b070001}, - {0xc78, 0x7b080001}, {0xc78, 0x7a090001}, - {0xc78, 0x790a0001}, {0xc78, 0x780b0001}, - {0xc78, 0x770c0001}, {0xc78, 0x760d0001}, - {0xc78, 0x750e0001}, {0xc78, 0x740f0001}, - {0xc78, 0x73100001}, {0xc78, 0x72110001}, - {0xc78, 0x71120001}, {0xc78, 0x70130001}, - {0xc78, 0x6f140001}, {0xc78, 0x6e150001}, - {0xc78, 0x6d160001}, {0xc78, 0x6c170001}, - {0xc78, 0x6b180001}, {0xc78, 0x6a190001}, - {0xc78, 0x691a0001}, {0xc78, 0x681b0001}, - {0xc78, 0x671c0001}, {0xc78, 0x661d0001}, - {0xc78, 0x651e0001}, {0xc78, 0x641f0001}, - {0xc78, 0x63200001}, {0xc78, 0x62210001}, - {0xc78, 0x61220001}, {0xc78, 0x60230001}, - {0xc78, 0x46240001}, {0xc78, 0x45250001}, - {0xc78, 0x44260001}, {0xc78, 0x43270001}, - {0xc78, 0x42280001}, {0xc78, 0x41290001}, - {0xc78, 0x402a0001}, {0xc78, 0x262b0001}, - {0xc78, 0x252c0001}, {0xc78, 0x242d0001}, - {0xc78, 0x232e0001}, {0xc78, 0x222f0001}, - {0xc78, 0x21300001}, {0xc78, 0x20310001}, - {0xc78, 0x06320001}, {0xc78, 0x05330001}, - {0xc78, 0x04340001}, {0xc78, 0x03350001}, - {0xc78, 0x02360001}, {0xc78, 0x01370001}, - {0xc78, 0x00380001}, {0xc78, 0x00390001}, - {0xc78, 0x003a0001}, {0xc78, 0x003b0001}, - {0xc78, 0x003c0001}, {0xc78, 0x003d0001}, - {0xc78, 0x003e0001}, {0xc78, 0x003f0001}, - {0xc78, 0x7b400001}, {0xc78, 0x7b410001}, - {0xc78, 0x7b420001}, {0xc78, 0x7b430001}, - {0xc78, 0x7b440001}, {0xc78, 0x7b450001}, - {0xc78, 0x7b460001}, {0xc78, 0x7b470001}, - {0xc78, 0x7b480001}, {0xc78, 0x7a490001}, - {0xc78, 0x794a0001}, {0xc78, 0x784b0001}, - {0xc78, 0x774c0001}, {0xc78, 0x764d0001}, - {0xc78, 0x754e0001}, {0xc78, 0x744f0001}, - {0xc78, 0x73500001}, {0xc78, 0x72510001}, - {0xc78, 0x71520001}, {0xc78, 0x70530001}, - {0xc78, 0x6f540001}, {0xc78, 0x6e550001}, - {0xc78, 0x6d560001}, {0xc78, 0x6c570001}, - {0xc78, 0x6b580001}, {0xc78, 0x6a590001}, - {0xc78, 0x695a0001}, {0xc78, 0x685b0001}, - {0xc78, 0x675c0001}, {0xc78, 0x665d0001}, - {0xc78, 0x655e0001}, {0xc78, 0x645f0001}, - {0xc78, 0x63600001}, {0xc78, 0x62610001}, - {0xc78, 0x61620001}, {0xc78, 0x60630001}, - {0xc78, 0x46640001}, {0xc78, 0x45650001}, - {0xc78, 0x44660001}, {0xc78, 0x43670001}, - {0xc78, 0x42680001}, {0xc78, 0x41690001}, - {0xc78, 0x406a0001}, {0xc78, 0x266b0001}, - {0xc78, 0x256c0001}, {0xc78, 0x246d0001}, - {0xc78, 0x236e0001}, {0xc78, 0x226f0001}, - {0xc78, 0x21700001}, {0xc78, 0x20710001}, - {0xc78, 0x06720001}, {0xc78, 0x05730001}, - {0xc78, 0x04740001}, {0xc78, 0x03750001}, - {0xc78, 0x02760001}, {0xc78, 0x01770001}, - {0xc78, 0x00780001}, {0xc78, 0x00790001}, - {0xc78, 0x007a0001}, {0xc78, 0x007b0001}, - {0xc78, 0x007c0001}, {0xc78, 0x007d0001}, - {0xc78, 0x007e0001}, {0xc78, 0x007f0001}, - {0xc78, 0x3800001e}, {0xc78, 0x3801001e}, - {0xc78, 0x3802001e}, {0xc78, 0x3803001e}, - {0xc78, 0x3804001e}, {0xc78, 0x3805001e}, - {0xc78, 0x3806001e}, {0xc78, 0x3807001e}, - {0xc78, 0x3808001e}, {0xc78, 0x3c09001e}, - {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e}, - {0xc78, 0x440c001e}, {0xc78, 0x480d001e}, - {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e}, - {0xc78, 0x5210001e}, {0xc78, 0x5611001e}, - {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e}, - {0xc78, 0x6014001e}, {0xc78, 0x6015001e}, - {0xc78, 0x6016001e}, {0xc78, 0x6217001e}, - {0xc78, 0x6218001e}, {0xc78, 0x6219001e}, - {0xc78, 0x621a001e}, {0xc78, 0x621b001e}, - {0xc78, 0x621c001e}, {0xc78, 0x621d001e}, - {0xc78, 0x621e001e}, {0xc78, 0x621f001e}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { - {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, - {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, - {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, - {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, - {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, - {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, - {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, - {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, - {0xc78, 0xed100001}, {0xc78, 0xec110001}, - {0xc78, 0xeb120001}, {0xc78, 0xea130001}, - {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, - {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, - {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, - {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, - {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, - {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, - {0xc78, 0x65200001}, {0xc78, 0x64210001}, - {0xc78, 0x63220001}, {0xc78, 0x4a230001}, - {0xc78, 0x49240001}, {0xc78, 0x48250001}, - {0xc78, 0x47260001}, {0xc78, 0x46270001}, - {0xc78, 0x45280001}, {0xc78, 0x44290001}, - {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, - {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, - {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, - {0xc78, 0x0a300001}, {0xc78, 0x09310001}, - {0xc78, 0x08320001}, {0xc78, 0x07330001}, - {0xc78, 0x06340001}, {0xc78, 0x05350001}, - {0xc78, 0x04360001}, {0xc78, 0x03370001}, - {0xc78, 0x02380001}, {0xc78, 0x01390001}, - {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, - {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, - {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, - {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, - {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, - {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, - {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, - {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, - {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, - {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, - {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, - {0xc78, 0xec500001}, {0xc78, 0xeb510001}, - {0xc78, 0xea520001}, {0xc78, 0xe9530001}, - {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, - {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, - {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, - {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, - {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, - {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, - {0xc78, 0x65600001}, {0xc78, 0x64610001}, - {0xc78, 0x63620001}, {0xc78, 0x62630001}, - {0xc78, 0x61640001}, {0xc78, 0x48650001}, - {0xc78, 0x47660001}, {0xc78, 0x46670001}, - {0xc78, 0x45680001}, {0xc78, 0x44690001}, - {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, - {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, - {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, - {0xc78, 0x24700001}, {0xc78, 0x09710001}, - {0xc78, 0x08720001}, {0xc78, 0x07730001}, - {0xc78, 0x06740001}, {0xc78, 0x05750001}, - {0xc78, 0x04760001}, {0xc78, 0x03770001}, - {0xc78, 0x02780001}, {0xc78, 0x01790001}, - {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, - {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, - {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, - {0xc50, 0x69553422}, - {0xc50, 0x69553420}, - {0x824, 0x00390204}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_std_table[] = { - {0xc78, 0xfb000001}, {0xc78, 0xfb010001}, - {0xc78, 0xfb020001}, {0xc78, 0xfb030001}, - {0xc78, 0xfb040001}, {0xc78, 0xfb050001}, - {0xc78, 0xfa060001}, {0xc78, 0xf9070001}, - {0xc78, 0xf8080001}, {0xc78, 0xf7090001}, - {0xc78, 0xf60a0001}, {0xc78, 0xf50b0001}, - {0xc78, 0xf40c0001}, {0xc78, 0xf30d0001}, - {0xc78, 0xf20e0001}, {0xc78, 0xf10f0001}, - {0xc78, 0xf0100001}, {0xc78, 0xef110001}, - {0xc78, 0xee120001}, {0xc78, 0xed130001}, - {0xc78, 0xec140001}, {0xc78, 0xeb150001}, - {0xc78, 0xea160001}, {0xc78, 0xe9170001}, - {0xc78, 0xe8180001}, {0xc78, 0xe7190001}, - {0xc78, 0xc81a0001}, {0xc78, 0xc71b0001}, - {0xc78, 0xc61c0001}, {0xc78, 0x071d0001}, - {0xc78, 0x061e0001}, {0xc78, 0x051f0001}, - {0xc78, 0x04200001}, {0xc78, 0x03210001}, - {0xc78, 0xaa220001}, {0xc78, 0xa9230001}, - {0xc78, 0xa8240001}, {0xc78, 0xa7250001}, - {0xc78, 0xa6260001}, {0xc78, 0x85270001}, - {0xc78, 0x84280001}, {0xc78, 0x83290001}, - {0xc78, 0x252a0001}, {0xc78, 0x242b0001}, - {0xc78, 0x232c0001}, {0xc78, 0x222d0001}, - {0xc78, 0x672e0001}, {0xc78, 0x662f0001}, - {0xc78, 0x65300001}, {0xc78, 0x64310001}, - {0xc78, 0x63320001}, {0xc78, 0x62330001}, - {0xc78, 0x61340001}, {0xc78, 0x45350001}, - {0xc78, 0x44360001}, {0xc78, 0x43370001}, - {0xc78, 0x42380001}, {0xc78, 0x41390001}, - {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, - {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, - {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, - {0xc78, 0xfb400001}, {0xc78, 0xfb410001}, - {0xc78, 0xfb420001}, {0xc78, 0xfb430001}, - {0xc78, 0xfb440001}, {0xc78, 0xfb450001}, - {0xc78, 0xfa460001}, {0xc78, 0xf9470001}, - {0xc78, 0xf8480001}, {0xc78, 0xf7490001}, - {0xc78, 0xf64a0001}, {0xc78, 0xf54b0001}, - {0xc78, 0xf44c0001}, {0xc78, 0xf34d0001}, - {0xc78, 0xf24e0001}, {0xc78, 0xf14f0001}, - {0xc78, 0xf0500001}, {0xc78, 0xef510001}, - {0xc78, 0xee520001}, {0xc78, 0xed530001}, - {0xc78, 0xec540001}, {0xc78, 0xeb550001}, - {0xc78, 0xea560001}, {0xc78, 0xe9570001}, - {0xc78, 0xe8580001}, {0xc78, 0xe7590001}, - {0xc78, 0xe65a0001}, {0xc78, 0xe55b0001}, - {0xc78, 0xe45c0001}, {0xc78, 0xe35d0001}, - {0xc78, 0xe25e0001}, {0xc78, 0xe15f0001}, - {0xc78, 0x8a600001}, {0xc78, 0x89610001}, - {0xc78, 0x88620001}, {0xc78, 0x87630001}, - {0xc78, 0x86640001}, {0xc78, 0x85650001}, - {0xc78, 0x84660001}, {0xc78, 0x83670001}, - {0xc78, 0x82680001}, {0xc78, 0x6b690001}, - {0xc78, 0x6a6a0001}, {0xc78, 0x696b0001}, - {0xc78, 0x686c0001}, {0xc78, 0x676d0001}, - {0xc78, 0x666e0001}, {0xc78, 0x656f0001}, - {0xc78, 0x64700001}, {0xc78, 0x63710001}, - {0xc78, 0x62720001}, {0xc78, 0x61730001}, - {0xc78, 0x49740001}, {0xc78, 0x48750001}, - {0xc78, 0x47760001}, {0xc78, 0x46770001}, - {0xc78, 0x45780001}, {0xc78, 0x44790001}, - {0xc78, 0x437a0001}, {0xc78, 0x427b0001}, - {0xc78, 0x417c0001}, {0xc78, 0x407d0001}, - {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, - {0xc50, 0x00040022}, {0xc50, 0x00040020}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_highpa_table[] = { - {0xc78, 0xfa000001}, {0xc78, 0xf9010001}, - {0xc78, 0xf8020001}, {0xc78, 0xf7030001}, - {0xc78, 0xf6040001}, {0xc78, 0xf5050001}, - {0xc78, 0xf4060001}, {0xc78, 0xf3070001}, - {0xc78, 0xf2080001}, {0xc78, 0xf1090001}, - {0xc78, 0xf00a0001}, {0xc78, 0xef0b0001}, - {0xc78, 0xee0c0001}, {0xc78, 0xed0d0001}, - {0xc78, 0xec0e0001}, {0xc78, 0xeb0f0001}, - {0xc78, 0xea100001}, {0xc78, 0xe9110001}, - {0xc78, 0xe8120001}, {0xc78, 0xe7130001}, - {0xc78, 0xe6140001}, {0xc78, 0xe5150001}, - {0xc78, 0xe4160001}, {0xc78, 0xe3170001}, - {0xc78, 0xe2180001}, {0xc78, 0xe1190001}, - {0xc78, 0x8a1a0001}, {0xc78, 0x891b0001}, - {0xc78, 0x881c0001}, {0xc78, 0x871d0001}, - {0xc78, 0x861e0001}, {0xc78, 0x851f0001}, - {0xc78, 0x84200001}, {0xc78, 0x83210001}, - {0xc78, 0x82220001}, {0xc78, 0x6a230001}, - {0xc78, 0x69240001}, {0xc78, 0x68250001}, - {0xc78, 0x67260001}, {0xc78, 0x66270001}, - {0xc78, 0x65280001}, {0xc78, 0x64290001}, - {0xc78, 0x632a0001}, {0xc78, 0x622b0001}, - {0xc78, 0x612c0001}, {0xc78, 0x602d0001}, - {0xc78, 0x472e0001}, {0xc78, 0x462f0001}, - {0xc78, 0x45300001}, {0xc78, 0x44310001}, - {0xc78, 0x43320001}, {0xc78, 0x42330001}, - {0xc78, 0x41340001}, {0xc78, 0x40350001}, - {0xc78, 0x40360001}, {0xc78, 0x40370001}, - {0xc78, 0x40380001}, {0xc78, 0x40390001}, - {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, - {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, - {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, - {0xc78, 0xfa400001}, {0xc78, 0xf9410001}, - {0xc78, 0xf8420001}, {0xc78, 0xf7430001}, - {0xc78, 0xf6440001}, {0xc78, 0xf5450001}, - {0xc78, 0xf4460001}, {0xc78, 0xf3470001}, - {0xc78, 0xf2480001}, {0xc78, 0xf1490001}, - {0xc78, 0xf04a0001}, {0xc78, 0xef4b0001}, - {0xc78, 0xee4c0001}, {0xc78, 0xed4d0001}, - {0xc78, 0xec4e0001}, {0xc78, 0xeb4f0001}, - {0xc78, 0xea500001}, {0xc78, 0xe9510001}, - {0xc78, 0xe8520001}, {0xc78, 0xe7530001}, - {0xc78, 0xe6540001}, {0xc78, 0xe5550001}, - {0xc78, 0xe4560001}, {0xc78, 0xe3570001}, - {0xc78, 0xe2580001}, {0xc78, 0xe1590001}, - {0xc78, 0x8a5a0001}, {0xc78, 0x895b0001}, - {0xc78, 0x885c0001}, {0xc78, 0x875d0001}, - {0xc78, 0x865e0001}, {0xc78, 0x855f0001}, - {0xc78, 0x84600001}, {0xc78, 0x83610001}, - {0xc78, 0x82620001}, {0xc78, 0x6a630001}, - {0xc78, 0x69640001}, {0xc78, 0x68650001}, - {0xc78, 0x67660001}, {0xc78, 0x66670001}, - {0xc78, 0x65680001}, {0xc78, 0x64690001}, - {0xc78, 0x636a0001}, {0xc78, 0x626b0001}, - {0xc78, 0x616c0001}, {0xc78, 0x606d0001}, - {0xc78, 0x476e0001}, {0xc78, 0x466f0001}, - {0xc78, 0x45700001}, {0xc78, 0x44710001}, - {0xc78, 0x43720001}, {0xc78, 0x42730001}, - {0xc78, 0x41740001}, {0xc78, 0x40750001}, - {0xc78, 0x40760001}, {0xc78, 0x40770001}, - {0xc78, 0x40780001}, {0xc78, 0x40790001}, - {0xc78, 0x407a0001}, {0xc78, 0x407b0001}, - {0xc78, 0x407c0001}, {0xc78, 0x407d0001}, - {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, - {0xc50, 0x00040222}, {0xc50, 0x00040220}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00039c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001a3f1}, {0x0b, 0x00014787}, - {0x0c, 0x000896fe}, {0x0d, 0x0000e02c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00030355}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0000024f}, - {0x1f, 0x00000000}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x00057730}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f474}, - {0x15, 0x0004f477}, {0x15, 0x0008f455}, - {0x15, 0x000cf455}, {0x16, 0x00000339}, - {0x16, 0x00040339}, {0x16, 0x00080339}, - {0x16, 0x000c0366}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00000003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00000247}, {0x1f, 0x00000000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { - {0x00, 0x00010000}, {0xb0, 0x000dffe0}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xb1, 0x00000018}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xb2, 0x00084c00}, - {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, - {0xb7, 0x00000010}, {0xb8, 0x0000907f}, - {0x5c, 0x00000002}, {0x7c, 0x00000002}, - {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, - {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, - {0x1e, 0x00000000}, {0xdf, 0x00000780}, - {0x50, 0x00067435}, - /* - * The 8723bu vendor driver indicates that bit 8 should be set in - * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However - * they never actually check the package type - and just default - * to not setting it. - */ - {0x51, 0x0006b04e}, - {0x52, 0x000007d2}, {0x53, 0x00000000}, - {0x54, 0x00050400}, {0x55, 0x0004026e}, - {0xdd, 0x0000004c}, {0x70, 0x00067435}, - /* - * 0x71 has same package type condition as for register 0x51 - */ - {0x71, 0x0006b04e}, - {0x72, 0x000007d2}, {0x73, 0x00000000}, - {0x74, 0x00050400}, {0x75, 0x0004026e}, - {0xef, 0x00000100}, {0x34, 0x0000add7}, - {0x35, 0x00005c00}, {0x34, 0x00009dd4}, - {0x35, 0x00005000}, {0x34, 0x00008dd1}, - {0x35, 0x00004400}, {0x34, 0x00007dce}, - {0x35, 0x00003800}, {0x34, 0x00006cd1}, - {0x35, 0x00004400}, {0x34, 0x00005cce}, - {0x35, 0x00003800}, {0x34, 0x000048ce}, - {0x35, 0x00004400}, {0x34, 0x000034ce}, - {0x35, 0x00003800}, {0x34, 0x00002451}, - {0x35, 0x00004400}, {0x34, 0x0000144e}, - {0x35, 0x00003800}, {0x34, 0x00000051}, - {0x35, 0x00004400}, {0xef, 0x00000000}, - {0xef, 0x00000100}, {0xed, 0x00000010}, - {0x44, 0x0000add7}, {0x44, 0x00009dd4}, - {0x44, 0x00008dd1}, {0x44, 0x00007dce}, - {0x44, 0x00006cc1}, {0x44, 0x00005cce}, - {0x44, 0x000044d1}, {0x44, 0x000034ce}, - {0x44, 0x00002451}, {0x44, 0x0000144e}, - {0x44, 0x00000051}, {0xef, 0x00000000}, - {0xed, 0x00000000}, {0x7f, 0x00020080}, - {0xef, 0x00002000}, {0x3b, 0x000380ef}, - {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, - {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, - {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, - {0x3b, 0x00000900}, {0xef, 0x00000000}, - {0xed, 0x00000001}, {0x40, 0x000380ef}, - {0x40, 0x000302fe}, {0x40, 0x00028ce6}, - {0x40, 0x000200bc}, {0x40, 0x000188a5}, - {0x40, 0x00010fbc}, {0x40, 0x00008f71}, - {0x40, 0x00000900}, {0xed, 0x00000000}, - {0x82, 0x00080000}, {0x83, 0x00008000}, - {0x84, 0x00048d80}, {0x85, 0x00068000}, - {0xa2, 0x00080000}, {0xa3, 0x00008000}, - {0xa4, 0x00048d80}, {0xa5, 0x00068000}, - {0xed, 0x00000002}, {0xef, 0x00000002}, - {0x56, 0x00000032}, {0x76, 0x00000032}, - {0x01, 0x00000780}, - {0xff, 0xffffffff} -}; - -#ifdef CONFIG_RTL8XXXU_UNTESTED -static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00010255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f424}, - {0x15, 0x0004f424}, {0x15, 0x0008f424}, - {0x15, 0x000cf424}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287af}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x00014297}, - {0x13, 0x00010295}, {0x13, 0x0000c298}, - {0x13, 0x0000819c}, {0x13, 0x000040a8}, - {0x13, 0x0000001c}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f424}, - {0x15, 0x0004f424}, {0x15, 0x0008f424}, - {0x15, 0x000cf424}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00010255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f405}, - {0x15, 0x0004f405}, {0x15, 0x0008f405}, - {0x15, 0x000cf405}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb0}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e529}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00000255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x0000083c}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000977c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x000d8000}, {0x12, 0x00090000}, - {0x12, 0x00051000}, {0x12, 0x00012000}, - {0x13, 0x00028fb4}, {0x13, 0x00024fa8}, - {0x13, 0x000207a4}, {0x13, 0x0001c3b0}, - {0x13, 0x000183a4}, {0x13, 0x00014398}, - {0x13, 0x000101a4}, {0x13, 0x0000c198}, - {0x13, 0x000080a4}, {0x13, 0x00004098}, - {0x13, 0x00000000}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f405}, - {0x15, 0x0004f405}, {0x15, 0x0008f405}, - {0x15, 0x000cf405}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; -#endif - -static struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = { - {0x7f, 0x00000082}, {0x81, 0x0003fc00}, - {0x00, 0x00030000}, {0x08, 0x00008400}, - {0x18, 0x00000407}, {0x19, 0x00000012}, - {0x1b, 0x00000064}, {0x1e, 0x00080009}, - {0x1f, 0x00000880}, {0x2f, 0x0001a060}, - {0x3f, 0x00000000}, {0x42, 0x000060c0}, - {0x57, 0x000d0000}, {0x58, 0x000be180}, - {0x67, 0x00001552}, {0x83, 0x00000000}, - {0xb0, 0x000ff9f1}, {0xb1, 0x00055418}, - {0xb2, 0x0008cc00}, {0xb4, 0x00043083}, - {0xb5, 0x00008166}, {0xb6, 0x0000803e}, - {0xb7, 0x0001c69f}, {0xb8, 0x0000407f}, - {0xb9, 0x00080001}, {0xba, 0x00040001}, - {0xbb, 0x00000400}, {0xbf, 0x000c0000}, - {0xc2, 0x00002400}, {0xc3, 0x00000009}, - {0xc4, 0x00040c91}, {0xc5, 0x00099999}, - {0xc6, 0x000000a3}, {0xc7, 0x00088820}, - {0xc8, 0x00076c06}, {0xc9, 0x00000000}, - {0xca, 0x00080000}, {0xdf, 0x00000180}, - {0xef, 0x000001a0}, {0x51, 0x00069545}, - {0x52, 0x0007e45e}, {0x53, 0x00000071}, - {0x56, 0x00051ff3}, {0x35, 0x000000a8}, - {0x35, 0x000001e2}, {0x35, 0x000002a8}, - {0x36, 0x00001c24}, {0x36, 0x00009c24}, - {0x36, 0x00011c24}, {0x36, 0x00019c24}, - {0x18, 0x00000c07}, {0x5a, 0x00048000}, - {0x19, 0x000739d0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x34, 0x0000a093}, {0x34, 0x0000908f}, - {0x34, 0x0000808c}, {0x34, 0x0000704d}, - {0x34, 0x0000604a}, {0x34, 0x00005047}, - {0x34, 0x0000400a}, {0x34, 0x00003007}, - {0x34, 0x00002004}, {0x34, 0x00001001}, - {0x34, 0x00000000}, -#else - /* Regular */ - {0x34, 0x0000add7}, {0x34, 0x00009dd4}, - {0x34, 0x00008dd1}, {0x34, 0x00007dce}, - {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, - {0x34, 0x00004dc5}, {0x34, 0x000034cc}, - {0x34, 0x0000244f}, {0x34, 0x0000144c}, - {0x34, 0x00000014}, -#endif - {0x00, 0x00030159}, - {0x84, 0x00068180}, - {0x86, 0x0000014e}, - {0x87, 0x00048e00}, - {0x8e, 0x00065540}, - {0x8f, 0x00088000}, - {0xef, 0x000020a0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000f07b0}, -#else - {0x3b, 0x000f02b0}, -#endif - {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, - {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, - {0x3b, 0x000a0080}, {0x3b, 0x00090080}, - {0x3b, 0x0008f780}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000787b0}, -#else - {0x3b, 0x00078730}, -#endif - {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, - {0x3b, 0x00040620}, {0x3b, 0x00037090}, - {0x3b, 0x00020080}, {0x3b, 0x0001f060}, - {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, - {0xfe, 0x00000000}, {0x18, 0x0000fc07}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00000001}, {0x1f, 0x00080000}, - {0x00, 0x00033e70}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192eu_radiob_init_table[] = { - {0x7f, 0x00000082}, {0x81, 0x0003fc00}, - {0x00, 0x00030000}, {0x08, 0x00008400}, - {0x18, 0x00000407}, {0x19, 0x00000012}, - {0x1b, 0x00000064}, {0x1e, 0x00080009}, - {0x1f, 0x00000880}, {0x2f, 0x0001a060}, - {0x3f, 0x00000000}, {0x42, 0x000060c0}, - {0x57, 0x000d0000}, {0x58, 0x000be180}, - {0x67, 0x00001552}, {0x7f, 0x00000082}, - {0x81, 0x0003f000}, {0x83, 0x00000000}, - {0xdf, 0x00000180}, {0xef, 0x000001a0}, - {0x51, 0x00069545}, {0x52, 0x0007e42e}, - {0x53, 0x00000071}, {0x56, 0x00051ff3}, - {0x35, 0x000000a8}, {0x35, 0x000001e0}, - {0x35, 0x000002a8}, {0x36, 0x00001ca8}, - {0x36, 0x00009c24}, {0x36, 0x00011c24}, - {0x36, 0x00019c24}, {0x18, 0x00000c07}, - {0x5a, 0x00048000}, {0x19, 0x000739d0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x34, 0x0000a093}, {0x34, 0x0000908f}, - {0x34, 0x0000808c}, {0x34, 0x0000704d}, - {0x34, 0x0000604a}, {0x34, 0x00005047}, - {0x34, 0x0000400a}, {0x34, 0x00003007}, - {0x34, 0x00002004}, {0x34, 0x00001001}, - {0x34, 0x00000000}, -#else - {0x34, 0x0000add7}, {0x34, 0x00009dd4}, - {0x34, 0x00008dd1}, {0x34, 0x00007dce}, - {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, - {0x34, 0x00004dc5}, {0x34, 0x000034cc}, - {0x34, 0x0000244f}, {0x34, 0x0000144c}, - {0x34, 0x00000014}, -#endif - {0x00, 0x00030159}, {0x84, 0x00068180}, - {0x86, 0x000000ce}, {0x87, 0x00048a00}, - {0x8e, 0x00065540}, {0x8f, 0x00088000}, - {0xef, 0x000020a0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000f07b0}, -#else - {0x3b, 0x000f02b0}, -#endif - - {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, - {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, - {0x3b, 0x000a0080}, {0x3b, 0x00090080}, - {0x3b, 0x0008f780}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000787b0}, -#else - {0x3b, 0x00078730}, -#endif - {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, - {0x3b, 0x00040620}, {0x3b, 0x00037090}, - {0x3b, 0x00020080}, {0x3b, 0x0001f060}, - {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, - {0x00, 0x00010159}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1e, 0x00000001}, - {0x1f, 0x00080000}, {0x00, 0x00033e70}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = { - { /* RF_A */ - .hssiparm1 = REG_FPGA0_XA_HSSI_PARM1, - .hssiparm2 = REG_FPGA0_XA_HSSI_PARM2, - .lssiparm = REG_FPGA0_XA_LSSI_PARM, - .hspiread = REG_HSPI_XA_READBACK, - .lssiread = REG_FPGA0_XA_LSSI_READBACK, - .rf_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL, - }, - { /* RF_B */ - .hssiparm1 = REG_FPGA0_XB_HSSI_PARM1, - .hssiparm2 = REG_FPGA0_XB_HSSI_PARM2, - .lssiparm = REG_FPGA0_XB_LSSI_PARM, - .hspiread = REG_HSPI_XB_READBACK, - .lssiread = REG_FPGA0_XB_LSSI_READBACK, - .rf_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL, - }, -}; - -static const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = { - REG_OFDM0_XA_RX_IQ_IMBALANCE, - REG_OFDM0_XB_RX_IQ_IMBALANCE, - REG_OFDM0_ENERGY_CCA_THRES, - REG_OFDM0_AGCR_SSI_TABLE, - REG_OFDM0_XA_TX_IQ_IMBALANCE, - REG_OFDM0_XB_TX_IQ_IMBALANCE, - REG_OFDM0_XC_TX_AFE, - REG_OFDM0_XD_TX_AFE, - REG_OFDM0_RX_IQ_EXT_ANTA -}; - -static u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr) -{ - struct usb_device *udev = priv->udev; - int len; - u8 data; - - mutex_lock(&priv->usb_buf_mutex); - len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_READ, - addr, 0, &priv->usb_buf.val8, sizeof(u8), - RTW_USB_CONTROL_MSG_TIMEOUT); - data = priv->usb_buf.val8; - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) - dev_info(&udev->dev, "%s(%04x) = 0x%02x, len %i\n", - __func__, addr, data, len); - return data; -} - -static u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr) -{ - struct usb_device *udev = priv->udev; - int len; - u16 data; - - mutex_lock(&priv->usb_buf_mutex); - len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_READ, - addr, 0, &priv->usb_buf.val16, sizeof(u16), - RTW_USB_CONTROL_MSG_TIMEOUT); - data = le16_to_cpu(priv->usb_buf.val16); - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) - dev_info(&udev->dev, "%s(%04x) = 0x%04x, len %i\n", - __func__, addr, data, len); - return data; -} - -static u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr) -{ - struct usb_device *udev = priv->udev; - int len; - u32 data; - - mutex_lock(&priv->usb_buf_mutex); - len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_READ, - addr, 0, &priv->usb_buf.val32, sizeof(u32), - RTW_USB_CONTROL_MSG_TIMEOUT); - data = le32_to_cpu(priv->usb_buf.val32); - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) - dev_info(&udev->dev, "%s(%04x) = 0x%08x, len %i\n", - __func__, addr, data, len); - return data; -} - -static int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val) -{ - struct usb_device *udev = priv->udev; - int ret; - - mutex_lock(&priv->usb_buf_mutex); - priv->usb_buf.val8 = val; - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, - addr, 0, &priv->usb_buf.val8, sizeof(u8), - RTW_USB_CONTROL_MSG_TIMEOUT); - - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) - dev_info(&udev->dev, "%s(%04x) = 0x%02x\n", - __func__, addr, val); - return ret; -} - -static int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val) -{ - struct usb_device *udev = priv->udev; - int ret; - - mutex_lock(&priv->usb_buf_mutex); - priv->usb_buf.val16 = cpu_to_le16(val); - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, - addr, 0, &priv->usb_buf.val16, sizeof(u16), - RTW_USB_CONTROL_MSG_TIMEOUT); - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) - dev_info(&udev->dev, "%s(%04x) = 0x%04x\n", - __func__, addr, val); - return ret; -} - -static int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val) -{ - struct usb_device *udev = priv->udev; - int ret; - - mutex_lock(&priv->usb_buf_mutex); - priv->usb_buf.val32 = cpu_to_le32(val); - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, - addr, 0, &priv->usb_buf.val32, sizeof(u32), - RTW_USB_CONTROL_MSG_TIMEOUT); - mutex_unlock(&priv->usb_buf_mutex); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) - dev_info(&udev->dev, "%s(%04x) = 0x%08x\n", - __func__, addr, val); - return ret; -} - -static int -rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len) -{ - struct usb_device *udev = priv->udev; - int blocksize = priv->fops->writeN_block_size; - int ret, i, count, remainder; - - count = len / blocksize; - remainder = len % blocksize; - - for (i = 0; i < count; i++) { - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, - addr, 0, buf, blocksize, - RTW_USB_CONTROL_MSG_TIMEOUT); - if (ret != blocksize) - goto write_error; - - addr += blocksize; - buf += blocksize; - } - - if (remainder) { - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, - addr, 0, buf, remainder, - RTW_USB_CONTROL_MSG_TIMEOUT); - if (ret != remainder) - goto write_error; - } - - return len; - -write_error: - dev_info(&udev->dev, - "%s: Failed to write block at addr: %04x size: %04x\n", - __func__, addr, blocksize); - return -EAGAIN; -} - -static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, - enum rtl8xxxu_rfpath path, u8 reg) -{ - u32 hssia, val32, retval; - - hssia = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2); - if (path != RF_A) - val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm2); - else - val32 = hssia; - - val32 &= ~FPGA0_HSSI_PARM2_ADDR_MASK; - val32 |= (reg << FPGA0_HSSI_PARM2_ADDR_SHIFT); - val32 |= FPGA0_HSSI_PARM2_EDGE_READ; - hssia &= ~FPGA0_HSSI_PARM2_EDGE_READ; - rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia); - - udelay(10); - - rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].hssiparm2, val32); - udelay(100); - - hssia |= FPGA0_HSSI_PARM2_EDGE_READ; - rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia); - udelay(10); - - val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm1); - if (val32 & FPGA0_HSSI_PARM1_PI) - retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hspiread); - else - retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].lssiread); - - retval &= 0xfffff; - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_READ) - dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n", - __func__, reg, retval); - return retval; -} - -/* - * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can - * have write issues in high temperature conditions. We may have to - * retry writing them. - */ -static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, - enum rtl8xxxu_rfpath path, u8 reg, u32 data) -{ - int ret, retval; - u32 dataaddr, val32; - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_WRITE) - dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n", - __func__, reg, data); - - data &= FPGA0_LSSI_PARM_DATA_MASK; - dataaddr = (reg << FPGA0_LSSI_PARM_ADDR_SHIFT) | data; - - if (priv->rtl_chip == RTL8192E) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); - val32 &= ~0x20000; - rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); - } - - /* Use XB for path B */ - ret = rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].lssiparm, dataaddr); - if (ret != sizeof(dataaddr)) - retval = -EIO; - else - retval = 0; - - udelay(1); - - if (priv->rtl_chip == RTL8192E) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); - val32 |= 0x20000; - rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); - } - - return retval; -} - -static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, - struct h2c_cmd *h2c, int len) -{ - struct device *dev = &priv->udev->dev; - int mbox_nr, retry, retval = 0; - int mbox_reg, mbox_ext_reg; - u8 val8; - - mutex_lock(&priv->h2c_mutex); - - mbox_nr = priv->next_mbox; - mbox_reg = REG_HMBOX_0 + (mbox_nr * 4); - mbox_ext_reg = priv->fops->mbox_ext_reg + - (mbox_nr * priv->fops->mbox_ext_width); - - /* - * MBOX ready? - */ - retry = 100; - do { - val8 = rtl8xxxu_read8(priv, REG_HMTFR); - if (!(val8 & BIT(mbox_nr))) - break; - } while (retry--); - - if (!retry) { - dev_info(dev, "%s: Mailbox busy\n", __func__); - retval = -EBUSY; - goto error; - } - - /* - * Need to swap as it's being swapped again by rtl8xxxu_write16/32() - */ - if (len > sizeof(u32)) { - if (priv->fops->mbox_ext_width == 4) { - rtl8xxxu_write32(priv, mbox_ext_reg, - le32_to_cpu(h2c->raw_wide.ext)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C_EXT %08x\n", - le32_to_cpu(h2c->raw_wide.ext)); - } else { - rtl8xxxu_write16(priv, mbox_ext_reg, - le16_to_cpu(h2c->raw.ext)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C_EXT %04x\n", - le16_to_cpu(h2c->raw.ext)); - } - } - rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data)); - - priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX; - -error: - mutex_unlock(&priv->h2c_mutex); - return retval; -} - -static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) -{ - struct h2c_cmd h2c; - int reqnum = 0; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; - h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); - h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; - h2c.bt_mp_oper.data = data; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); - - reqnum++; - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; - h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); - h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; - h2c.bt_mp_oper.addr = reg; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); -} - -static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - - val8 = rtl8xxxu_read8(priv, REG_SPS0_CTRL); - val8 |= BIT(0) | BIT(3); - rtl8xxxu_write8(priv, REG_SPS0_CTRL, val8); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM); - val32 &= ~(BIT(4) | BIT(5)); - val32 |= BIT(3); - if (priv->rf_paths == 2) { - val32 &= ~(BIT(20) | BIT(21)); - val32 |= BIT(19); - } - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); - val32 &= ~OFDM_RF_PATH_TX_MASK; - if (priv->tx_paths == 2) - val32 |= OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B; - else if (priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C) - val32 |= OFDM_RF_PATH_TX_B; - else - val32 |= OFDM_RF_PATH_TX_A; - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 &= ~FPGA_RF_MODE_JAPAN; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - if (priv->rf_paths == 2) - rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x63db25a0); - else - rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x631b25a0); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x32d95); - if (priv->rf_paths == 2) - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x32d95); - - rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); -} - -static void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv) -{ - u8 sps0; - u32 val32; - - sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL); - - /* RF RX code for preamble power saving */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM); - val32 &= ~(BIT(3) | BIT(4) | BIT(5)); - if (priv->rf_paths == 2) - val32 &= ~(BIT(19) | BIT(20) | BIT(21)); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32); - - /* Disable TX for four paths */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); - val32 &= ~OFDM_RF_PATH_TX_MASK; - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); - - /* Enable power saving */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 |= FPGA_RF_MODE_JAPAN; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - /* AFE control register to power down bits [30:22] */ - if (priv->rf_paths == 2) - rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00db25a0); - else - rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x001b25a0); - - /* Power down RF module */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0); - if (priv->rf_paths == 2) - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0); - - sps0 &= ~(BIT(0) | BIT(3)); - rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0); -} - - -static void rtl8723a_stop_tx_beacon(struct rtl8xxxu_priv *priv) -{ - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2); - val8 &= ~BIT(6); - rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8); - - rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x64); - val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8); -} - - -/* - * The rtl8723a has 3 channel groups for it's efuse settings. It only - * supports the 2.4GHz band, so channels 1 - 14: - * group 0: channels 1 - 3 - * group 1: channels 4 - 9 - * group 2: channels 10 - 14 - * - * Note: We index from 0 in the code - */ -static int rtl8723a_channel_to_group(int channel) -{ - int group; - - if (channel < 4) - group = 0; - else if (channel < 10) - group = 1; - else - group = 2; - - return group; -} - -/* - * Valid for rtl8723bu and rtl8192eu - */ -static int rtl8xxxu_gen2_channel_to_group(int channel) -{ - int group; - - if (channel < 3) - group = 0; - else if (channel < 6) - group = 1; - else if (channel < 9) - group = 2; - else if (channel < 12) - group = 3; - else - group = 4; - - return group; -} - -static void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - u32 val32, rsr; - u8 val8, opmode; - bool ht = true; - int sec_ch_above, channel; - int i; - - opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE); - rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); - channel = hw->conf.chandef.chan->hw_value; - - switch (hw->conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - ht = false; - case NL80211_CHAN_WIDTH_20: - opmode |= BW_OPMODE_20MHZ; - rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 &= ~FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); - val32 &= ~FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2); - val32 |= FPGA0_ANALOG2_20MHZ; - rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32); - break; - case NL80211_CHAN_WIDTH_40: - if (hw->conf.chandef.center_freq1 > - hw->conf.chandef.chan->center_freq) { - sec_ch_above = 1; - channel += 2; - } else { - sec_ch_above = 0; - channel -= 2; - } - - opmode &= ~BW_OPMODE_20MHZ; - rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode); - rsr &= ~RSR_RSC_BANDWIDTH_40M; - if (sec_ch_above) - rsr |= RSR_RSC_UPPER_SUB_CHANNEL; - else - rsr |= RSR_RSC_LOWER_SUB_CHANNEL; - rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 |= FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); - val32 |= FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); - - /* - * Set Control channel to upper or lower. These settings - * are required only for 40MHz - */ - val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); - val32 &= ~CCK0_SIDEBAND; - if (!sec_ch_above) - val32 |= CCK0_SIDEBAND; - rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); - val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */ - if (sec_ch_above) - val32 |= OFDM_LSTF_PRIME_CH_LOW; - else - val32 |= OFDM_LSTF_PRIME_CH_HIGH; - rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2); - val32 &= ~FPGA0_ANALOG2_20MHZ; - rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); - val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL); - if (sec_ch_above) - val32 |= FPGA0_PS_UPPER_CHANNEL; - else - val32 |= FPGA0_PS_LOWER_CHANNEL; - rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); - break; - - default: - break; - } - - for (i = RF_A; i < priv->rf_paths; i++) { - val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); - val32 &= ~MODE_AG_CHANNEL_MASK; - val32 |= channel; - rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); - } - - if (ht) - val8 = 0x0e; - else - val8 = 0x0a; - - rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8); - rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8); - - rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808); - rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a); - - for (i = RF_A; i < priv->rf_paths; i++) { - val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); - if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) - val32 &= ~MODE_AG_CHANNEL_20MHZ; - else - val32 |= MODE_AG_CHANNEL_20MHZ; - rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); - } -} - -static void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - u32 val32, rsr; - u8 val8, subchannel; - u16 rf_mode_bw; - bool ht = true; - int sec_ch_above, channel; - int i; - - rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL); - rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK; - rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); - channel = hw->conf.chandef.chan->hw_value; - -/* Hack */ - subchannel = 0; - - switch (hw->conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - ht = false; - case NL80211_CHAN_WIDTH_20: - rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20; - subchannel = 0; - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 &= ~FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); - val32 &= ~FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT); - val32 &= ~(BIT(30) | BIT(31)); - rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32); - - break; - case NL80211_CHAN_WIDTH_40: - rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40; - - if (hw->conf.chandef.center_freq1 > - hw->conf.chandef.chan->center_freq) { - sec_ch_above = 1; - channel += 2; - } else { - sec_ch_above = 0; - channel -= 2; - } - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 |= FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); - val32 |= FPGA_RF_MODE; - rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); - - /* - * Set Control channel to upper or lower. These settings - * are required only for 40MHz - */ - val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); - val32 &= ~CCK0_SIDEBAND; - if (!sec_ch_above) - val32 |= CCK0_SIDEBAND; - rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); - val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */ - if (sec_ch_above) - val32 |= OFDM_LSTF_PRIME_CH_LOW; - else - val32 |= OFDM_LSTF_PRIME_CH_HIGH; - rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); - val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL); - if (sec_ch_above) - val32 |= FPGA0_PS_UPPER_CHANNEL; - else - val32 |= FPGA0_PS_LOWER_CHANNEL; - rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); - break; - case NL80211_CHAN_WIDTH_80: - rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80; - break; - default: - break; - } - - for (i = RF_A; i < priv->rf_paths; i++) { - val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); - val32 &= ~MODE_AG_CHANNEL_MASK; - val32 |= channel; - rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); - } - - rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw); - rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel); - - if (ht) - val8 = 0x0e; - else - val8 = 0x0a; - - rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8); - rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8); - - rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808); - rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a); - - for (i = RF_A; i < priv->rf_paths; i++) { - val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); - val32 &= ~MODE_AG_BW_MASK; - switch(hw->conf.chandef.width) { - case NL80211_CHAN_WIDTH_80: - val32 |= MODE_AG_BW_80MHZ_8723B; - break; - case NL80211_CHAN_WIDTH_40: - val32 |= MODE_AG_BW_40MHZ_8723B; - break; - default: - val32 |= MODE_AG_BW_20MHZ_8723B; - break; - } - rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); - } -} - -static void -rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) -{ - struct rtl8xxxu_power_base *power_base = priv->power_base; - u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS]; - u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS]; - u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b; - u8 val8; - int group, i; - - group = rtl8723a_channel_to_group(channel); - - cck[0] = priv->cck_tx_power_index_A[group] - 1; - cck[1] = priv->cck_tx_power_index_B[group] - 1; - - if (priv->hi_pa) { - if (cck[0] > 0x20) - cck[0] = 0x20; - if (cck[1] > 0x20) - cck[1] = 0x20; - } - - ofdm[0] = priv->ht40_1s_tx_power_index_A[group]; - ofdm[1] = priv->ht40_1s_tx_power_index_B[group]; - if (ofdm[0]) - ofdm[0] -= 1; - if (ofdm[1]) - ofdm[1] -= 1; - - ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a; - ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b; - - mcsbase[0] = ofdm[0]; - mcsbase[1] = ofdm[1]; - if (!ht40) { - mcsbase[0] += priv->ht20_tx_power_index_diff[group].a; - mcsbase[1] += priv->ht20_tx_power_index_diff[group].b; - } - - if (priv->tx_paths > 1) { - if (ofdm[0] > priv->ht40_2s_tx_power_index_diff[group].a) - ofdm[0] -= priv->ht40_2s_tx_power_index_diff[group].a; - if (ofdm[1] > priv->ht40_2s_tx_power_index_diff[group].b) - ofdm[1] -= priv->ht40_2s_tx_power_index_diff[group].b; - } - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL) - dev_info(&priv->udev->dev, - "%s: Setting TX power CCK A: %02x, " - "CCK B: %02x, OFDM A: %02x, OFDM B: %02x\n", - __func__, cck[0], cck[1], ofdm[0], ofdm[1]); - - for (i = 0; i < RTL8723A_MAX_RF_PATHS; i++) { - if (cck[i] > RF6052_MAX_TX_PWR) - cck[i] = RF6052_MAX_TX_PWR; - if (ofdm[i] > RF6052_MAX_TX_PWR) - ofdm[i] = RF6052_MAX_TX_PWR; - } - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); - val32 &= 0xffff00ff; - val32 |= (cck[0] << 8); - rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xff; - val32 |= ((cck[0] << 8) | (cck[0] << 16) | (cck[0] << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xffffff00; - val32 |= cck[1]; - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); - val32 &= 0xff; - val32 |= ((cck[1] << 8) | (cck[1] << 16) | (cck[1] << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); - - ofdm_a = ofdmbase[0] | ofdmbase[0] << 8 | - ofdmbase[0] << 16 | ofdmbase[0] << 24; - ofdm_b = ofdmbase[1] | ofdmbase[1] << 8 | - ofdmbase[1] << 16 | ofdmbase[1] << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, - ofdm_a + power_base->reg_0e00); - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, - ofdm_b + power_base->reg_0830); - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, - ofdm_a + power_base->reg_0e04); - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, - ofdm_b + power_base->reg_0834); - - mcs_a = mcsbase[0] | mcsbase[0] << 8 | - mcsbase[0] << 16 | mcsbase[0] << 24; - mcs_b = mcsbase[1] | mcsbase[1] << 8 | - mcsbase[1] << 16 | mcsbase[1] << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, - mcs_a + power_base->reg_0e10); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, - mcs_b + power_base->reg_083c); - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, - mcs_a + power_base->reg_0e14); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, - mcs_b + power_base->reg_0848); - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, - mcs_a + power_base->reg_0e18); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, - mcs_b + power_base->reg_084c); - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, - mcs_a + power_base->reg_0e1c); - for (i = 0; i < 3; i++) { - if (i != 2) - val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0; - else - val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0; - rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8); - } - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, - mcs_b + power_base->reg_0868); - for (i = 0; i < 3; i++) { - if (i != 2) - val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0; - else - val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0; - rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8); - } -} - -static void -rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) -{ - u32 val32, ofdm, mcs; - u8 cck, ofdmbase, mcsbase; - int group, tx_idx; - - tx_idx = 0; - group = rtl8xxxu_gen2_channel_to_group(channel); - - cck = priv->cck_tx_power_index_B[group]; - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); - val32 &= 0xffff00ff; - val32 |= (cck << 8); - rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_B[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; - ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_B[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); -} - -static void -rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) -{ - u32 val32, ofdm, mcs; - u8 cck, ofdmbase, mcsbase; - int group, tx_idx; - - tx_idx = 0; - group = rtl8xxxu_gen2_channel_to_group(channel); - - cck = priv->cck_tx_power_index_A[group]; - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); - val32 &= 0xffff00ff; - val32 |= (cck << 8); - rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_A[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a; - ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_A[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].a; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].a; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs); - - if (priv->tx_paths > 1) { - cck = priv->cck_tx_power_index_B[group]; - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xffffff00; - val32 |= cck; - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_B[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; - ofdm = ofdmbase | ofdmbase << 8 | - ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_B[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs); - } -} - -static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv, - enum nl80211_iftype linktype) -{ - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_MSR); - val8 &= ~MSR_LINKTYPE_MASK; - - switch (linktype) { - case NL80211_IFTYPE_UNSPECIFIED: - val8 |= MSR_LINKTYPE_NONE; - break; - case NL80211_IFTYPE_ADHOC: - val8 |= MSR_LINKTYPE_ADHOC; - break; - case NL80211_IFTYPE_STATION: - val8 |= MSR_LINKTYPE_STATION; - break; - case NL80211_IFTYPE_AP: - val8 |= MSR_LINKTYPE_AP; - break; - default: - goto out; - } - - rtl8xxxu_write8(priv, REG_MSR, val8); -out: - return; -} - -static void -rtl8xxxu_set_retry(struct rtl8xxxu_priv *priv, u16 short_retry, u16 long_retry) -{ - u16 val16; - - val16 = ((short_retry << RETRY_LIMIT_SHORT_SHIFT) & - RETRY_LIMIT_SHORT_MASK) | - ((long_retry << RETRY_LIMIT_LONG_SHIFT) & - RETRY_LIMIT_LONG_MASK); - - rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16); -} - -static void -rtl8xxxu_set_spec_sifs(struct rtl8xxxu_priv *priv, u16 cck, u16 ofdm) -{ - u16 val16; - - val16 = ((cck << SPEC_SIFS_CCK_SHIFT) & SPEC_SIFS_CCK_MASK) | - ((ofdm << SPEC_SIFS_OFDM_SHIFT) & SPEC_SIFS_OFDM_MASK); - - rtl8xxxu_write16(priv, REG_SPEC_SIFS, val16); -} - -static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - char *cut; - - switch (priv->chip_cut) { - case 0: - cut = "A"; - break; - case 1: - cut = "B"; - break; - case 2: - cut = "C"; - break; - case 3: - cut = "D"; - break; - case 4: - cut = "E"; - break; - default: - cut = "unknown"; - } - - dev_info(dev, - "RTL%s rev %s (%s) %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n", - priv->chip_name, cut, priv->chip_vendor, priv->tx_paths, - priv->rx_paths, priv->ep_tx_count, priv->has_wifi, - priv->has_bluetooth, priv->has_gps, priv->hi_pa); - - dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr); -} - -static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - u32 val32, bonding; - u16 val16; - - val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); - priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >> - SYS_CFG_CHIP_VERSION_SHIFT; - if (val32 & SYS_CFG_TRP_VAUX_EN) { - dev_info(dev, "Unsupported test chip\n"); - return -ENOTSUPP; - } - - if (val32 & SYS_CFG_BT_FUNC) { - if (priv->chip_cut >= 3) { - sprintf(priv->chip_name, "8723BU"); - priv->rtl_chip = RTL8723B; - } else { - sprintf(priv->chip_name, "8723AU"); - priv->usb_interrupts = 1; - priv->rtl_chip = RTL8723A; - } - - priv->rf_paths = 1; - priv->rx_paths = 1; - priv->tx_paths = 1; - - val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL); - if (val32 & MULTI_WIFI_FUNC_EN) - priv->has_wifi = 1; - if (val32 & MULTI_BT_FUNC_EN) - priv->has_bluetooth = 1; - if (val32 & MULTI_GPS_FUNC_EN) - priv->has_gps = 1; - priv->is_multi_func = 1; - } else if (val32 & SYS_CFG_TYPE_ID) { - bonding = rtl8xxxu_read32(priv, REG_HPON_FSM); - bonding &= HPON_FSM_BONDING_MASK; - if (priv->fops->tx_desc_size == - sizeof(struct rtl8xxxu_txdesc40)) { - if (bonding == HPON_FSM_BONDING_1T2R) { - sprintf(priv->chip_name, "8191EU"); - priv->rf_paths = 2; - priv->rx_paths = 2; - priv->tx_paths = 1; - priv->rtl_chip = RTL8191E; - } else { - sprintf(priv->chip_name, "8192EU"); - priv->rf_paths = 2; - priv->rx_paths = 2; - priv->tx_paths = 2; - priv->rtl_chip = RTL8192E; - } - } else if (bonding == HPON_FSM_BONDING_1T2R) { - sprintf(priv->chip_name, "8191CU"); - priv->rf_paths = 2; - priv->rx_paths = 2; - priv->tx_paths = 1; - priv->usb_interrupts = 1; - priv->rtl_chip = RTL8191C; - } else { - sprintf(priv->chip_name, "8192CU"); - priv->rf_paths = 2; - priv->rx_paths = 2; - priv->tx_paths = 2; - priv->usb_interrupts = 1; - priv->rtl_chip = RTL8192C; - } - priv->has_wifi = 1; - } else { - sprintf(priv->chip_name, "8188CU"); - priv->rf_paths = 1; - priv->rx_paths = 1; - priv->tx_paths = 1; - priv->rtl_chip = RTL8188C; - priv->usb_interrupts = 1; - priv->has_wifi = 1; - } - - switch (priv->rtl_chip) { - case RTL8188E: - case RTL8192E: - case RTL8723B: - switch (val32 & SYS_CFG_VENDOR_EXT_MASK) { - case SYS_CFG_VENDOR_ID_TSMC: - sprintf(priv->chip_vendor, "TSMC"); - break; - case SYS_CFG_VENDOR_ID_SMIC: - sprintf(priv->chip_vendor, "SMIC"); - priv->vendor_smic = 1; - break; - case SYS_CFG_VENDOR_ID_UMC: - sprintf(priv->chip_vendor, "UMC"); - priv->vendor_umc = 1; - break; - default: - sprintf(priv->chip_vendor, "unknown"); - } - break; - default: - if (val32 & SYS_CFG_VENDOR_ID) { - sprintf(priv->chip_vendor, "UMC"); - priv->vendor_umc = 1; - } else { - sprintf(priv->chip_vendor, "TSMC"); - } - } - - val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS); - priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28; - - val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX); - if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) { - priv->ep_tx_high_queue = 1; - priv->ep_tx_count++; - } - - if (val16 & NORMAL_SIE_EP_TX_NORMAL_MASK) { - priv->ep_tx_normal_queue = 1; - priv->ep_tx_count++; - } - - if (val16 & NORMAL_SIE_EP_TX_LOW_MASK) { - priv->ep_tx_low_queue = 1; - priv->ep_tx_count++; - } - - /* - * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX - */ - if (!priv->ep_tx_count) { - switch (priv->nr_out_eps) { - case 4: - case 3: - priv->ep_tx_low_queue = 1; - priv->ep_tx_count++; - case 2: - priv->ep_tx_normal_queue = 1; - priv->ep_tx_count++; - case 1: - priv->ep_tx_high_queue = 1; - priv->ep_tx_count++; - break; - default: - dev_info(dev, "Unsupported USB TX end-points\n"); - return -ENOTSUPP; - } - } - - return 0; -} - -static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, - efuse->cck_tx_power_index_A, - sizeof(efuse->cck_tx_power_index_A)); - memcpy(priv->cck_tx_power_index_B, - efuse->cck_tx_power_index_B, - sizeof(efuse->cck_tx_power_index_B)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->ht40_1s_tx_power_index_A, - sizeof(efuse->ht40_1s_tx_power_index_A)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->ht40_1s_tx_power_index_B, - sizeof(efuse->ht40_1s_tx_power_index_B)); - - memcpy(priv->ht20_tx_power_index_diff, - efuse->ht20_tx_power_index_diff, - sizeof(efuse->ht20_tx_power_index_diff)); - memcpy(priv->ofdm_tx_power_index_diff, - efuse->ofdm_tx_power_index_diff, - sizeof(efuse->ofdm_tx_power_index_diff)); - - memcpy(priv->ht40_max_power_offset, - efuse->ht40_max_power_offset, - sizeof(efuse->ht40_max_power_offset)); - memcpy(priv->ht20_max_power_offset, - efuse->ht20_max_power_offset, - sizeof(efuse->ht20_max_power_offset)); - - if (priv->efuse_wifi.efuse8723.version >= 0x01) { - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; - } - - priv->power_base = &rtl8723a_power_base; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", - efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.41s\n", - efuse->device_name); - return 0; -} - -static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, - sizeof(efuse->tx_power_index_A.cck_base)); - memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, - sizeof(efuse->tx_power_index_B.cck_base)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->tx_power_index_A.ht40_base, - sizeof(efuse->tx_power_index_A.ht40_base)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->tx_power_index_B.ht40_base, - sizeof(efuse->tx_power_index_B.ht40_base)); - - priv->ofdm_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; - priv->ofdm_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; - - priv->ht20_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; - priv->ht20_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; - - priv->ht40_tx_power_diff[0].a = 0; - priv->ht40_tx_power_diff[0].b = 0; - - for (i = 1; i < RTL8723B_TX_COUNT; i++) { - priv->ofdm_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; - priv->ofdm_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; - - priv->ht20_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht20; - priv->ht20_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht20; - - priv->ht40_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht40; - priv->ht40_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht40; - } - - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - int i; - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8723bu_efuse)); - for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - - return 0; -} - -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, - efuse->cck_tx_power_index_A, - sizeof(efuse->cck_tx_power_index_A)); - memcpy(priv->cck_tx_power_index_B, - efuse->cck_tx_power_index_B, - sizeof(efuse->cck_tx_power_index_B)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->ht40_1s_tx_power_index_A, - sizeof(efuse->ht40_1s_tx_power_index_A)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->ht40_1s_tx_power_index_B, - sizeof(efuse->ht40_1s_tx_power_index_B)); - memcpy(priv->ht40_2s_tx_power_index_diff, - efuse->ht40_2s_tx_power_index_diff, - sizeof(efuse->ht40_2s_tx_power_index_diff)); - - memcpy(priv->ht20_tx_power_index_diff, - efuse->ht20_tx_power_index_diff, - sizeof(efuse->ht20_tx_power_index_diff)); - memcpy(priv->ofdm_tx_power_index_diff, - efuse->ofdm_tx_power_index_diff, - sizeof(efuse->ofdm_tx_power_index_diff)); - - memcpy(priv->ht40_max_power_offset, - efuse->ht40_max_power_offset, - sizeof(efuse->ht40_max_power_offset)); - memcpy(priv->ht20_max_power_offset, - efuse->ht20_max_power_offset, - sizeof(efuse->ht20_max_power_offset)); - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", - efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.20s\n", - efuse->device_name); - - priv->power_base = &rtl8192c_power_base; - - if (efuse->rf_regulatory & 0x20) { - sprintf(priv->chip_name, "8188RU"); - priv->rtl_chip = RTL8188R; - priv->hi_pa = 1; - priv->no_pape = 1; - priv->power_base = &rtl8188r_power_base; - } - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8192cu_efuse)); - for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - return 0; -} - -#endif - -static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, - sizeof(efuse->tx_power_index_A.cck_base)); - memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, - sizeof(efuse->tx_power_index_B.cck_base)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->tx_power_index_A.ht40_base, - sizeof(efuse->tx_power_index_A.ht40_base)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->tx_power_index_B.ht40_base, - sizeof(efuse->tx_power_index_B.ht40_base)); - - priv->ht20_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; - priv->ht20_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; - - priv->ht40_tx_power_diff[0].a = 0; - priv->ht40_tx_power_diff[0].b = 0; - - for (i = 1; i < RTL8723B_TX_COUNT; i++) { - priv->ofdm_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; - priv->ofdm_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; - - priv->ht20_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht20; - priv->ht20_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht20; - - priv->ht40_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht40; - priv->ht40_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht40; - } - - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name); - dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8192eu_efuse)); - for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - return 0; -} - -static int -rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) -{ - int i; - u8 val8; - u32 val32; - - /* Write Address */ - rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 1, offset & 0xff); - val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 2); - val8 &= 0xfc; - val8 |= (offset >> 8) & 0x03; - rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 2, val8); - - val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 3); - rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 3, val8 & 0x7f); - - /* Poll for data read */ - val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); - for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) { - val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); - if (val32 & BIT(31)) - break; - } - - if (i == RTL8XXXU_MAX_REG_POLL) - return -EIO; - - udelay(50); - val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); - - *data = val32 & 0xff; - return 0; -} - -static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int i, ret = 0; - u8 val8, word_mask, header, extheader; - u16 val16, efuse_addr, offset; - u32 val32; - - val16 = rtl8xxxu_read16(priv, REG_9346CR); - if (val16 & EEPROM_ENABLE) - priv->has_eeprom = 1; - if (val16 & EEPROM_BOOT) - priv->boot_eeprom = 1; - - if (priv->is_multi_func) { - val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST); - val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT; - rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32); - } - - dev_dbg(dev, "Booting from %s\n", - priv->boot_eeprom ? "EEPROM" : "EFUSE"); - - rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_ENABLE); - - /* 1.2V Power: From VDDON with Power Cut(0x0000[15]), default valid */ - val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); - if (!(val16 & SYS_ISO_PWC_EV12V)) { - val16 |= SYS_ISO_PWC_EV12V; - rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); - } - /* Reset: 0x0000[28], default valid */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - if (!(val16 & SYS_FUNC_ELDR)) { - val16 |= SYS_FUNC_ELDR; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - } - - /* - * Clock: Gated(0x0008[5]) 8M(0x0008[1]) clock from ANA, default valid - */ - val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR); - if (!(val16 & SYS_CLK_LOADER_ENABLE) || !(val16 & SYS_CLK_ANA8M)) { - val16 |= (SYS_CLK_LOADER_ENABLE | SYS_CLK_ANA8M); - rtl8xxxu_write16(priv, REG_SYS_CLKR, val16); - } - - /* Default value is 0xff */ - memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN); - - efuse_addr = 0; - while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) { - u16 map_addr; - - ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header); - if (ret || header == 0xff) - goto exit; - - if ((header & 0x1f) == 0x0f) { /* extended header */ - offset = (header & 0xe0) >> 5; - - ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, - &extheader); - if (ret) - goto exit; - /* All words disabled */ - if ((extheader & 0x0f) == 0x0f) - continue; - - offset |= ((extheader & 0xf0) >> 1); - word_mask = extheader & 0x0f; - } else { - offset = (header >> 4) & 0x0f; - word_mask = header & 0x0f; - } - - /* Get word enable value from PG header */ - - /* We have 8 bits to indicate validity */ - map_addr = offset * 8; - if (map_addr >= EFUSE_MAP_LEN) { - dev_warn(dev, "%s: Illegal map_addr (%04x), " - "efuse corrupt!\n", - __func__, map_addr); - ret = -EINVAL; - goto exit; - } - for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { - /* Check word enable condition in the section */ - if (word_mask & BIT(i)) { - map_addr += 2; - continue; - } - - ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); - if (ret) - goto exit; - priv->efuse_wifi.raw[map_addr++] = val8; - - ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); - if (ret) - goto exit; - priv->efuse_wifi.raw[map_addr++] = val8; - } - } - -exit: - rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_DISABLE); - - return ret; -} - -static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 sys_func; - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); - sys_func &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func |= SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); -} - -static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 sys_func; - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); - sys_func &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func |= SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); -} - -static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int ret = 0, i; - u32 val32; - - /* Poll checksum report */ - for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) { - val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); - if (val32 & MCU_FW_DL_CSUM_REPORT) - break; - } - - if (i == RTL8XXXU_FIRMWARE_POLL_MAX) { - dev_warn(dev, "Firmware checksum poll timed out\n"); - ret = -EAGAIN; - goto exit; - } - - val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); - val32 |= MCU_FW_DL_READY; - val32 &= ~MCU_WINT_INIT_READY; - rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); - - /* - * Reset the 8051 in order for the firmware to start running, - * otherwise it won't come up on the 8192eu - */ - priv->fops->reset_8051(priv); - - /* Wait for firmware to become ready */ - for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) { - val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); - if (val32 & MCU_WINT_INIT_READY) - break; - - udelay(100); - } - - if (i == RTL8XXXU_FIRMWARE_POLL_MAX) { - dev_warn(dev, "Firmware failed to start\n"); - ret = -EAGAIN; - goto exit; - } - - /* - * Init H2C command - */ - if (priv->rtl_chip == RTL8723B) - rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); -exit: - return ret; -} - -static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) -{ - int pages, remainder, i, ret; - u8 val8; - u16 val16; - u32 val32; - u8 *fwptr; - - val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC + 1); - val8 |= 4; - rtl8xxxu_write8(priv, REG_SYS_FUNC + 1, val8); - - /* 8051 enable */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); - if (val8 & MCU_FW_RAM_SEL) { - pr_info("do the RAM reset\n"); - rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); - priv->fops->reset_8051(priv); - } - - /* MCU firmware download enable */ - val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); - val8 |= MCU_FW_DL_ENABLE; - rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); - - /* 8051 reset */ - val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); - val32 &= ~BIT(19); - rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); - - /* Reset firmware download checksum */ - val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); - val8 |= MCU_FW_DL_CSUM_REPORT; - rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); - - pages = priv->fw_size / RTL_FW_PAGE_SIZE; - remainder = priv->fw_size % RTL_FW_PAGE_SIZE; - - fwptr = priv->fw_data->data; - - for (i = 0; i < pages; i++) { - val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; - val8 |= i; - rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); - - ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, - fwptr, RTL_FW_PAGE_SIZE); - if (ret != RTL_FW_PAGE_SIZE) { - ret = -EAGAIN; - goto fw_abort; - } - - fwptr += RTL_FW_PAGE_SIZE; - } - - if (remainder) { - val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; - val8 |= i; - rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); - ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, - fwptr, remainder); - if (ret != remainder) { - ret = -EAGAIN; - goto fw_abort; - } - } - - ret = 0; -fw_abort: - /* MCU firmware download disable */ - val16 = rtl8xxxu_read16(priv, REG_MCU_FW_DL); - val16 &= ~MCU_FW_DL_ENABLE; - rtl8xxxu_write16(priv, REG_MCU_FW_DL, val16); - - return ret; -} - -static int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) -{ - struct device *dev = &priv->udev->dev; - const struct firmware *fw; - int ret = 0; - u16 signature; - - dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name); - if (request_firmware(&fw, fw_name, &priv->udev->dev)) { - dev_warn(dev, "request_firmware(%s) failed\n", fw_name); - ret = -EAGAIN; - goto exit; - } - if (!fw) { - dev_warn(dev, "Firmware data not available\n"); - ret = -EINVAL; - goto exit; - } - - priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL); - if (!priv->fw_data) { - ret = -ENOMEM; - goto exit; - } - priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header); - - signature = le16_to_cpu(priv->fw_data->signature); - switch (signature & 0xfff0) { - case 0x92e0: - case 0x92c0: - case 0x88c0: - case 0x5300: - case 0x2300: - break; - default: - ret = -EINVAL; - dev_warn(dev, "%s: Invalid firmware signature: 0x%04x\n", - __func__, signature); - } - - dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n", - le16_to_cpu(priv->fw_data->major_version), - priv->fw_data->minor_version, signature); - -exit: - release_firmware(fw); - return ret; -} - -static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - switch (priv->chip_cut) { - case 0: - fw_name = "rtlwifi/rtl8723aufw_A.bin"; - break; - case 1: - if (priv->enable_bluetooth) - fw_name = "rtlwifi/rtl8723aufw_B.bin"; - else - fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin"; - - break; - default: - return -EINVAL; - } - - ret = rtl8xxxu_load_firmware(priv, fw_name); - return ret; -} - -static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - if (priv->enable_bluetooth) - fw_name = "rtlwifi/rtl8723bu_bt.bin"; - else - fw_name = "rtlwifi/rtl8723bu_nic.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - return ret; -} - -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - if (!priv->vendor_umc) - fw_name = "rtlwifi/rtl8192cufw_TMSC.bin"; - else if (priv->chip_cut || priv->rtl_chip == RTL8192C) - fw_name = "rtlwifi/rtl8192cufw_B.bin"; - else - fw_name = "rtlwifi/rtl8192cufw_A.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - - return ret; -} - -#endif - -static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - fw_name = "rtlwifi/rtl8192eu_nic.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - - return ret; -} - -static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) -{ - u16 val16; - int i = 100; - - /* Inform 8051 to perform reset */ - rtl8xxxu_write8(priv, REG_HMTFR + 3, 0x20); - - for (i = 100; i > 0; i--) { - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - - if (!(val16 & SYS_FUNC_CPU_ENABLE)) { - dev_dbg(&priv->udev->dev, - "%s: Firmware self reset success!\n", __func__); - break; - } - udelay(50); - } - - if (!i) { - /* Force firmware reset */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - } -} - -static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); - val32 &= ~(BIT(20) | BIT(24)); - rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); - - val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); - val32 &= ~BIT(4); - rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); - - val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); - val32 |= BIT(3); - rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 |= BIT(24); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); - val32 &= 0xffffff00; - val32 |= 0x77; - rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); -} - -static int -rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_reg8val *array = priv->fops->mactable; - int i, ret; - u16 reg; - u8 val; - - for (i = 0; ; i++) { - reg = array[i].reg; - val = array[i].val; - - if (reg == 0xffff && val == 0xff) - break; - - ret = rtl8xxxu_write8(priv, reg, val); - if (ret != 1) { - dev_warn(&priv->udev->dev, - "Failed to initialize MAC " - "(reg: %04x, val %02x)\n", reg, val); - return -EAGAIN; - } - } - - if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) - rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a); - - return 0; -} - -static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_reg32val *array) -{ - int i, ret; - u16 reg; - u32 val; - - for (i = 0; ; i++) { - reg = array[i].reg; - val = array[i].val; - - if (reg == 0xffff && val == 0xffffffff) - break; - - ret = rtl8xxxu_write32(priv, reg, val); - if (ret != sizeof(val)) { - dev_warn(&priv->udev->dev, - "Failed to initialize PHY\n"); - return -EAGAIN; - } - udelay(1); - } - - return 0; -} - -static void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8, ldoa15, ldov12d, lpldo, ldohci12; - u16 val16; - u32 val32; - - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - udelay(2); - val8 |= AFE_PLL_320_ENABLE; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - udelay(2); - - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff); - udelay(2); - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL); - val32 &= ~AFE_XTAL_RF_GATE; - if (priv->has_bluetooth) - val32 &= ~AFE_XTAL_BT_GATE; - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32); - - /* 6. 0x1f[7:0] = 0x07 */ - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - - if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table); - else if (priv->tx_paths == 2) - rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table); - else - rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table); - - if (priv->rtl_chip == RTL8188R && priv->hi_pa && - priv->vendor_umc && priv->chip_cut == 1) - rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50); - - if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table); - else - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table); - - ldoa15 = LDOA15_ENABLE | LDOA15_OBUF; - ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT); - ldohci12 = 0x57; - lpldo = 1; - val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15; - rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32); -} - -static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - - /* 6. 0x1f[7:0] = 0x07 */ - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - - /* Why? */ - rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); - rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); - rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); - - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); -} - -static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - /* 6. 0x1f[7:0] = 0x07 */ - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD | SYS_FUNC_DIO_RF | - SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB); - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table); - - if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table); - else - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table); -} - -/* - * Most of this is black magic retrieved from the old rtl8723au driver - */ -static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - - priv->fops->init_phy_bb(priv); - - if (priv->tx_paths == 1 && priv->rx_paths == 2) { - /* - * For 1T2R boards, patch the registers. - * - * It looks like 8191/2 1T2R boards use path B for TX - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_TX_INFO); - val32 &= ~(BIT(0) | BIT(1)); - val32 |= BIT(1); - rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA1_TX_INFO); - val32 &= ~0x300033; - val32 |= 0x200022; - rtl8xxxu_write32(priv, REG_FPGA1_TX_INFO, val32); - - val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); - val32 &= ~CCK0_AFE_RX_MASK; - val32 &= 0x00ffffff; - val32 |= 0x40000000; - val32 |= CCK0_AFE_RX_ANT_B; - rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); - val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK); - val32 |= (OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B | - OFDM_RF_PATH_TX_B); - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_PARM1); - val32 &= ~(BIT(4) | BIT(5)); - val32 |= BIT(4); - rtl8xxxu_write32(priv, REG_OFDM0_AGC_PARM1, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_CCK_RFON); - val32 &= ~(BIT(27) | BIT(26)); - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_TX_CCK_RFON, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_CCK_BBON); - val32 &= ~(BIT(27) | BIT(26)); - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_TX_CCK_BBON, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_RFON); - val32 &= ~(BIT(27) | BIT(26)); - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_TX_OFDM_RFON, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_BBON); - val32 &= ~(BIT(27) | BIT(26)); - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_TX_OFDM_BBON, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_TO_TX); - val32 &= ~(BIT(27) | BIT(26)); - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_TX_TO_TX, val32); - } - - if (priv->has_xtalk) { - val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL); - - val8 = priv->xtalk; - val32 &= 0xff000fff; - val32 |= ((val8 | (val8 << 6)) << 12); - - rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32); - } - - if (priv->rtl_chip == RTL8192E) - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x000f81fb); - - return 0; -} - -static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rfregval *array, - enum rtl8xxxu_rfpath path) -{ - int i, ret; - u8 reg; - u32 val; - - for (i = 0; ; i++) { - reg = array[i].reg; - val = array[i].val; - - if (reg == 0xff && val == 0xffffffff) - break; - - switch (reg) { - case 0xfe: - msleep(50); - continue; - case 0xfd: - mdelay(5); - continue; - case 0xfc: - mdelay(1); - continue; - case 0xfb: - udelay(50); - continue; - case 0xfa: - udelay(5); - continue; - case 0xf9: - udelay(1); - continue; - } - - ret = rtl8xxxu_write_rfreg(priv, path, reg, val); - if (ret) { - dev_warn(&priv->udev->dev, - "Failed to initialize RF\n"); - return -EAGAIN; - } - udelay(1); - } - - return 0; -} - -static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rfregval *table, - enum rtl8xxxu_rfpath path) -{ - u32 val32; - u16 val16, rfsi_rfenv; - u16 reg_sw_ctrl, reg_int_oe, reg_hssi_parm2; - - switch (path) { - case RF_A: - reg_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL; - reg_int_oe = REG_FPGA0_XA_RF_INT_OE; - reg_hssi_parm2 = REG_FPGA0_XA_HSSI_PARM2; - break; - case RF_B: - reg_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL; - reg_int_oe = REG_FPGA0_XB_RF_INT_OE; - reg_hssi_parm2 = REG_FPGA0_XB_HSSI_PARM2; - break; - default: - dev_err(&priv->udev->dev, "%s:Unsupported RF path %c\n", - __func__, path + 'A'); - return -EINVAL; - } - /* For path B, use XB */ - rfsi_rfenv = rtl8xxxu_read16(priv, reg_sw_ctrl); - rfsi_rfenv &= FPGA0_RF_RFENV; - - /* - * These two we might be able to optimize into one - */ - val32 = rtl8xxxu_read32(priv, reg_int_oe); - val32 |= BIT(20); /* 0x10 << 16 */ - rtl8xxxu_write32(priv, reg_int_oe, val32); - udelay(1); - - val32 = rtl8xxxu_read32(priv, reg_int_oe); - val32 |= BIT(4); - rtl8xxxu_write32(priv, reg_int_oe, val32); - udelay(1); - - /* - * These two we might be able to optimize into one - */ - val32 = rtl8xxxu_read32(priv, reg_hssi_parm2); - val32 &= ~FPGA0_HSSI_3WIRE_ADDR_LEN; - rtl8xxxu_write32(priv, reg_hssi_parm2, val32); - udelay(1); - - val32 = rtl8xxxu_read32(priv, reg_hssi_parm2); - val32 &= ~FPGA0_HSSI_3WIRE_DATA_LEN; - rtl8xxxu_write32(priv, reg_hssi_parm2, val32); - udelay(1); - - rtl8xxxu_init_rf_regs(priv, table, path); - - /* For path B, use XB */ - val16 = rtl8xxxu_read16(priv, reg_sw_ctrl); - val16 &= ~FPGA0_RF_RFENV; - val16 |= rfsi_rfenv; - rtl8xxxu_write16(priv, reg_sw_ctrl, val16); - - return 0; -} - -static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A); - - /* Reduce 80M spur */ - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - - return ret; -} - -static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); - /* - * PHY LCK - */ - rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); - msleep(200); - rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); - - return ret; -} - -#ifdef CONFIG_RTL8XXXU_UNTESTED -static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_rfregval *rftable; - int ret; - - if (priv->rtl_chip == RTL8188R) { - rftable = rtl8188ru_radioa_1t_highpa_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - } else if (priv->rf_paths == 1) { - rftable = rtl8192cu_radioa_1t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - } else { - rftable = rtl8192cu_radioa_2t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - if (ret) - goto exit; - rftable = rtl8192cu_radiob_2t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B); - } - -exit: - return ret; -} -#endif - -static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A); - if (ret) - goto exit; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B); - -exit: - return ret; -} - -static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data) -{ - int ret = -EBUSY; - int count = 0; - u32 value; - - value = LLT_OP_WRITE | address << 8 | data; - - rtl8xxxu_write32(priv, REG_LLT_INIT, value); - - do { - value = rtl8xxxu_read32(priv, REG_LLT_INIT); - if ((value & LLT_OP_MASK) == LLT_OP_INACTIVE) { - ret = 0; - break; - } - } while (count++ < 20); - - return ret; -} - -static int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) -{ - int ret; - int i; - - for (i = 0; i < last_tx_page; i++) { - ret = rtl8xxxu_llt_write(priv, i, i + 1); - if (ret) - goto exit; - } - - ret = rtl8xxxu_llt_write(priv, last_tx_page, 0xff); - if (ret) - goto exit; - - /* Mark remaining pages as a ring buffer */ - for (i = last_tx_page + 1; i < 0xff; i++) { - ret = rtl8xxxu_llt_write(priv, i, (i + 1)); - if (ret) - goto exit; - } - - /* Let last entry point to the start entry of ring buffer */ - ret = rtl8xxxu_llt_write(priv, 0xff, last_tx_page + 1); - if (ret) - goto exit; - -exit: - return ret; -} - -static int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) -{ - u32 val32; - int ret = 0; - int i; - - val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); - val32 |= AUTO_LLT_INIT_LLT; - rtl8xxxu_write32(priv, REG_AUTO_LLT, val32); - - for (i = 500; i; i--) { - val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); - if (!(val32 & AUTO_LLT_INIT_LLT)) - break; - usleep_range(2, 4); - } - - if (!i) { - ret = -EBUSY; - dev_warn(&priv->udev->dev, "LLT table init failed\n"); - } - - return ret; -} - -static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv) -{ - u16 val16, hi, lo; - u16 hiq, mgq, bkq, beq, viq, voq; - int hip, mgp, bkp, bep, vip, vop; - int ret = 0; - - switch (priv->ep_tx_count) { - case 1: - if (priv->ep_tx_high_queue) { - hi = TRXDMA_QUEUE_HIGH; - } else if (priv->ep_tx_low_queue) { - hi = TRXDMA_QUEUE_LOW; - } else if (priv->ep_tx_normal_queue) { - hi = TRXDMA_QUEUE_NORMAL; - } else { - hi = 0; - ret = -EINVAL; - } - - hiq = hi; - mgq = hi; - bkq = hi; - beq = hi; - viq = hi; - voq = hi; - - hip = 0; - mgp = 0; - bkp = 0; - bep = 0; - vip = 0; - vop = 0; - break; - case 2: - if (priv->ep_tx_high_queue && priv->ep_tx_low_queue) { - hi = TRXDMA_QUEUE_HIGH; - lo = TRXDMA_QUEUE_LOW; - } else if (priv->ep_tx_normal_queue && priv->ep_tx_low_queue) { - hi = TRXDMA_QUEUE_NORMAL; - lo = TRXDMA_QUEUE_LOW; - } else if (priv->ep_tx_high_queue && priv->ep_tx_normal_queue) { - hi = TRXDMA_QUEUE_HIGH; - lo = TRXDMA_QUEUE_NORMAL; - } else { - ret = -EINVAL; - hi = 0; - lo = 0; - } - - hiq = hi; - mgq = hi; - bkq = lo; - beq = lo; - viq = hi; - voq = hi; - - hip = 0; - mgp = 0; - bkp = 1; - bep = 1; - vip = 0; - vop = 0; - break; - case 3: - beq = TRXDMA_QUEUE_LOW; - bkq = TRXDMA_QUEUE_LOW; - viq = TRXDMA_QUEUE_NORMAL; - voq = TRXDMA_QUEUE_HIGH; - mgq = TRXDMA_QUEUE_HIGH; - hiq = TRXDMA_QUEUE_HIGH; - - hip = hiq ^ 3; - mgp = mgq ^ 3; - bkp = bkq ^ 3; - bep = beq ^ 3; - vip = viq ^ 3; - vop = viq ^ 3; - break; - default: - ret = -EINVAL; - } - - /* - * None of the vendor drivers are configuring the beacon - * queue here .... why? - */ - if (!ret) { - val16 = rtl8xxxu_read16(priv, REG_TRXDMA_CTRL); - val16 &= 0x7; - val16 |= (voq << TRXDMA_CTRL_VOQ_SHIFT) | - (viq << TRXDMA_CTRL_VIQ_SHIFT) | - (beq << TRXDMA_CTRL_BEQ_SHIFT) | - (bkq << TRXDMA_CTRL_BKQ_SHIFT) | - (mgq << TRXDMA_CTRL_MGQ_SHIFT) | - (hiq << TRXDMA_CTRL_HIQ_SHIFT); - rtl8xxxu_write16(priv, REG_TRXDMA_CTRL, val16); - - priv->pipe_out[TXDESC_QUEUE_VO] = - usb_sndbulkpipe(priv->udev, priv->out_ep[vop]); - priv->pipe_out[TXDESC_QUEUE_VI] = - usb_sndbulkpipe(priv->udev, priv->out_ep[vip]); - priv->pipe_out[TXDESC_QUEUE_BE] = - usb_sndbulkpipe(priv->udev, priv->out_ep[bep]); - priv->pipe_out[TXDESC_QUEUE_BK] = - usb_sndbulkpipe(priv->udev, priv->out_ep[bkp]); - priv->pipe_out[TXDESC_QUEUE_BEACON] = - usb_sndbulkpipe(priv->udev, priv->out_ep[0]); - priv->pipe_out[TXDESC_QUEUE_MGNT] = - usb_sndbulkpipe(priv->udev, priv->out_ep[mgp]); - priv->pipe_out[TXDESC_QUEUE_HIGH] = - usb_sndbulkpipe(priv->udev, priv->out_ep[hip]); - priv->pipe_out[TXDESC_QUEUE_CMD] = - usb_sndbulkpipe(priv->udev, priv->out_ep[0]); - } - - return ret; -} - -static void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, - bool iqk_ok, int result[][8], - int candidate, bool tx_only) -{ - u32 oldval, x, tx0_a, reg; - int y, tx0_c; - u32 val32; - - if (!iqk_ok) - return; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); - oldval = val32 >> 22; - - x = result[candidate][0]; - if ((x & 0x00000200) != 0) - x = x | 0xfffffc00; - tx0_a = (x * oldval) >> 8; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); - val32 &= ~0x3ff; - val32 |= tx0_a; - rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); - val32 &= ~BIT(31); - if ((x * oldval >> 7) & 0x1) - val32 |= BIT(31); - rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); - - y = result[candidate][1]; - if ((y & 0x00000200) != 0) - y = y | 0xfffffc00; - tx0_c = (y * oldval) >> 8; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XC_TX_AFE); - val32 &= ~0xf0000000; - val32 |= (((tx0_c & 0x3c0) >> 6) << 28); - rtl8xxxu_write32(priv, REG_OFDM0_XC_TX_AFE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); - val32 &= ~0x003f0000; - val32 |= ((tx0_c & 0x3f) << 16); - rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); - val32 &= ~BIT(29); - if ((y * oldval >> 7) & 0x1) - val32 |= BIT(29); - rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); - - if (tx_only) { - dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__); - return; - } - - reg = result[candidate][2]; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE); - val32 &= ~0x3ff; - val32 |= (reg & 0x3ff); - rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32); - - reg = result[candidate][3] & 0x3F; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE); - val32 &= ~0xfc00; - val32 |= ((reg << 10) & 0xfc00); - rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32); - - reg = (result[candidate][3] >> 6) & 0xF; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_IQ_EXT_ANTA); - val32 &= ~0xf0000000; - val32 |= (reg << 28); - rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32); -} - -static void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, - bool iqk_ok, int result[][8], - int candidate, bool tx_only) -{ - u32 oldval, x, tx1_a, reg; - int y, tx1_c; - u32 val32; - - if (!iqk_ok) - return; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); - oldval = val32 >> 22; - - x = result[candidate][4]; - if ((x & 0x00000200) != 0) - x = x | 0xfffffc00; - tx1_a = (x * oldval) >> 8; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); - val32 &= ~0x3ff; - val32 |= tx1_a; - rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); - val32 &= ~BIT(27); - if ((x * oldval >> 7) & 0x1) - val32 |= BIT(27); - rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); - - y = result[candidate][5]; - if ((y & 0x00000200) != 0) - y = y | 0xfffffc00; - tx1_c = (y * oldval) >> 8; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XD_TX_AFE); - val32 &= ~0xf0000000; - val32 |= (((tx1_c & 0x3c0) >> 6) << 28); - rtl8xxxu_write32(priv, REG_OFDM0_XD_TX_AFE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); - val32 &= ~0x003f0000; - val32 |= ((tx1_c & 0x3f) << 16); - rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32); - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); - val32 &= ~BIT(25); - if ((y * oldval >> 7) & 0x1) - val32 |= BIT(25); - rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); - - if (tx_only) { - dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__); - return; - } - - reg = result[candidate][6]; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE); - val32 &= ~0x3ff; - val32 |= (reg & 0x3ff); - rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32); - - reg = result[candidate][7] & 0x3f; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE); - val32 &= ~0xfc00; - val32 |= ((reg << 10) & 0xfc00); - rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32); - - reg = (result[candidate][7] >> 6) & 0xf; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGCR_SSI_TABLE); - val32 &= ~0x0000f000; - val32 |= (reg << 12); - rtl8xxxu_write32(priv, REG_OFDM0_AGCR_SSI_TABLE, val32); -} - -#define MAX_TOLERANCE 5 - -static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv, - int result[][8], int c1, int c2) -{ - u32 i, j, diff, simubitmap, bound = 0; - int candidate[2] = {-1, -1}; /* for path A and path B */ - bool retval = true; - - if (priv->tx_paths > 1) - bound = 8; - else - bound = 4; - - simubitmap = 0; - - for (i = 0; i < bound; i++) { - diff = (result[c1][i] > result[c2][i]) ? - (result[c1][i] - result[c2][i]) : - (result[c2][i] - result[c1][i]); - if (diff > MAX_TOLERANCE) { - if ((i == 2 || i == 6) && !simubitmap) { - if (result[c1][i] + result[c1][i + 1] == 0) - candidate[(i / 4)] = c2; - else if (result[c2][i] + result[c2][i + 1] == 0) - candidate[(i / 4)] = c1; - else - simubitmap = simubitmap | (1 << i); - } else { - simubitmap = simubitmap | (1 << i); - } - } - } - - if (simubitmap == 0) { - for (i = 0; i < (bound / 4); i++) { - if (candidate[i] >= 0) { - for (j = i * 4; j < (i + 1) * 4 - 2; j++) - result[3][j] = result[candidate[i]][j]; - retval = false; - } - } - return retval; - } else if (!(simubitmap & 0x0f)) { - /* path A OK */ - for (i = 0; i < 4; i++) - result[3][i] = result[c1][i]; - } else if (!(simubitmap & 0xf0) && priv->tx_paths > 1) { - /* path B OK */ - for (i = 4; i < 8; i++) - result[3][i] = result[c1][i]; - } - - return false; -} - -static bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, - int result[][8], int c1, int c2) -{ - u32 i, j, diff, simubitmap, bound = 0; - int candidate[2] = {-1, -1}; /* for path A and path B */ - int tmp1, tmp2; - bool retval = true; - - if (priv->tx_paths > 1) - bound = 8; - else - bound = 4; - - simubitmap = 0; - - for (i = 0; i < bound; i++) { - if (i & 1) { - if ((result[c1][i] & 0x00000200)) - tmp1 = result[c1][i] | 0xfffffc00; - else - tmp1 = result[c1][i]; - - if ((result[c2][i]& 0x00000200)) - tmp2 = result[c2][i] | 0xfffffc00; - else - tmp2 = result[c2][i]; - } else { - tmp1 = result[c1][i]; - tmp2 = result[c2][i]; - } - - diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1); - - if (diff > MAX_TOLERANCE) { - if ((i == 2 || i == 6) && !simubitmap) { - if (result[c1][i] + result[c1][i + 1] == 0) - candidate[(i / 4)] = c2; - else if (result[c2][i] + result[c2][i + 1] == 0) - candidate[(i / 4)] = c1; - else - simubitmap = simubitmap | (1 << i); - } else { - simubitmap = simubitmap | (1 << i); - } - } - } - - if (simubitmap == 0) { - for (i = 0; i < (bound / 4); i++) { - if (candidate[i] >= 0) { - for (j = i * 4; j < (i + 1) * 4 - 2; j++) - result[3][j] = result[candidate[i]][j]; - retval = false; - } - } - return retval; - } else { - if (!(simubitmap & 0x03)) { - /* path A TX OK */ - for (i = 0; i < 2; i++) - result[3][i] = result[c1][i]; - } - - if (!(simubitmap & 0x0c)) { - /* path A RX OK */ - for (i = 2; i < 4; i++) - result[3][i] = result[c1][i]; - } - - if (!(simubitmap & 0x30) && priv->tx_paths > 1) { - /* path B RX OK */ - for (i = 4; i < 6; i++) - result[3][i] = result[c1][i]; - } - - if (!(simubitmap & 0x30) && priv->tx_paths > 1) { - /* path B RX OK */ - for (i = 6; i < 8; i++) - result[3][i] = result[c1][i]; - } - } - - return false; -} - -static void -rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup) -{ - int i; - - for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++) - backup[i] = rtl8xxxu_read8(priv, reg[i]); - - backup[i] = rtl8xxxu_read32(priv, reg[i]); -} - -static void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, - const u32 *reg, u32 *backup) -{ - int i; - - for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++) - rtl8xxxu_write8(priv, reg[i], backup[i]); - - rtl8xxxu_write32(priv, reg[i], backup[i]); -} - -static void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, - u32 *backup, int count) -{ - int i; - - for (i = 0; i < count; i++) - backup[i] = rtl8xxxu_read32(priv, regs[i]); -} - -static void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, - u32 *backup, int count) -{ - int i; - - for (i = 0; i < count; i++) - rtl8xxxu_write32(priv, regs[i], backup[i]); -} - - -static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, - bool path_a_on) -{ - u32 path_on; - int i; - - if (priv->tx_paths == 1) { - path_on = priv->fops->adda_1t_path_on; - rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init); - } else { - path_on = path_a_on ? priv->fops->adda_2t_path_on_a : - priv->fops->adda_2t_path_on_b; - - rtl8xxxu_write32(priv, regs[0], path_on); - } - - for (i = 1 ; i < RTL8XXXU_ADDA_REGS ; i++) - rtl8xxxu_write32(priv, regs[i], path_on); -} - -static void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv, - const u32 *regs, u32 *backup) -{ - int i = 0; - - rtl8xxxu_write8(priv, regs[i], 0x3f); - - for (i = 1 ; i < (RTL8XXXU_MAC_REGS - 1); i++) - rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(3))); - - rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(5))); -} - -static int rtl8xxxu_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_e94, reg_e9c, reg_ea4, val32; - int result = 0; - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1f); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140102); - - val32 = (priv->rf_paths > 1) ? 0x28160202 : - /*IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202: */ - 0x28160502; - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, val32); - - /* path-B IQK setting */ - if (priv->rf_paths > 1) { - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x10008c22); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x10008c22); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140102); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160202); - } - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x001028d1); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000)) - result |= 0x01; - else /* If TX not OK, ignore RX */ - goto out; - - /* If TX is OK, check whether RX is OK */ - if (!(reg_eac & BIT(27)) && - ((reg_ea4 & 0x03ff0000) != 0x01320000) && - ((reg_eac & 0x03ff0000) != 0x00360000)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", - __func__); -out: - return result; -} - -static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc; - int result = 0; - - /* One shot, path B LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002); - rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000); - - mdelay(1); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); - reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); - - if (!(reg_eac & BIT(31)) && - ((reg_eb4 & 0x03ff0000) != 0x01420000) && - ((reg_ebc & 0x03ff0000) != 0x00420000)) - result |= 0x01; - else - goto out; - - if (!(reg_eac & BIT(30)) && - (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) && - (((reg_ecc & 0x03ff0000) >> 16) != 0x36)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", - __func__); -out: - return result; -} - -static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; - int result = 0; - - path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * Enable path A PA in TX IQK mode - */ - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); - - /* - * Tx IQK setting - */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * The vendor driver indicates the USB module is always using - * S0S1 path 1 for the 8723bu. This may be different for 8192eu - */ - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. - * No trace of this in the 8192eu or 8188eu vendor drivers. - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - val32 = (reg_e9c >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000) && - ((reg_e94 & 0x03ff0000) < 0x01100000) && - ((reg_e94 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x01; - else /* If TX not OK, ignore RX */ - goto out; - -out: - return result; -} - -static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; - int result = 0; - - path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * Enable path A PA in TX IQK mode - */ - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); - - /* - * Tx IQK setting - */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * The vendor driver indicates the USB module is always using - * S0S1 path 1 for the 8723bu. This may be different for 8192eu - */ - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. - * No trace of this in the 8192eu or 8188eu vendor drivers. - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - val32 = (reg_e9c >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000) && - ((reg_e94 & 0x03ff0000) < 0x01100000) && - ((reg_e94 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x01; - else /* If TX not OK, ignore RX */ - goto out; - - val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | - ((reg_e9c & 0x3ff0000) >> 16); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* - * Modify RX IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); - - /* - * PA, PAD setting - */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); - - /* - * RX IQK setting - */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Disable BT - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); - - val32 = (reg_eac >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(27)) && - ((reg_ea4 & 0x03ff0000) != 0x01320000) && - ((reg_eac & 0x03ff0000) != 0x00360000) && - ((reg_ea4 & 0x03ff0000) < 0x01100000) && - ((reg_ea4 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x02; - else /* If TX not OK, ignore RX */ - goto out; -out: - return result; -} - -static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_e94, reg_e9c; - int result = 0; - - /* - * TX IQK - * PA/PAD controlled by 0x0 - */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000)) - result |= 0x01; - - return result; -} - -static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; - int result = 0; - - /* Leave IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00); - - /* Enable path A PA in TX IQK mode */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* TX IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000)) { - result |= 0x01; - } else { - /* PA/PAD controlled by 0x0 */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); - goto out; - } - - val32 = 0x80007c00 | - (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* Modify RX IQK mode table */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* IQK setting */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); - - if (!(reg_eac & BIT(27)) && - ((reg_ea4 & 0x03ff0000) != 0x01320000) && - ((reg_eac & 0x03ff0000) != 0x00360000)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", - __func__); - -out: - return result; -} - -static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_eb4, reg_ebc; - int result = 0; - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Path B IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - - if (!(reg_eac & BIT(31)) && - ((reg_eb4 & 0x03ff0000) != 0x01420000) && - ((reg_ebc & 0x03ff0000) != 0x00420000)) - result |= 0x01; - else - dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n", - __func__); - - return result; -} - -static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32; - int result = 0; - - /* Leave IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - /* Enable path A PA in TX IQK mode */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* TX IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - - if (!(reg_eac & BIT(31)) && - ((reg_eb4 & 0x03ff0000) != 0x01420000) && - ((reg_ebc & 0x03ff0000) != 0x00420000)) { - result |= 0x01; - } else { - /* - * PA/PAD controlled by 0x0 - * Vendor driver restores RF_A here which I believe is a bug - */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); - goto out; - } - - val32 = 0x80007c00 | - (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* Modify RX IQK mode table */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* IQK setting */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); - reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); - - if (!(reg_eac & BIT(30)) && - ((reg_ec4 & 0x03ff0000) != 0x01320000) && - ((reg_ecc & 0x03ff0000) != 0x00360000)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", - __func__); - -out: - return result; -} - -static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok, path_b_ok; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE - }; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt - */ - - if (t == 0) { - /* Save ADDA parameters, turn Path A ADDA on */ - rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - rtl8xxxu_save_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - } - - rtl8xxxu_path_adda_on(priv, adda_regs, true); - - if (t == 0) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1); - if (val32 & FPGA0_HSSI_PARM1_PI) - priv->pi_enabled = 1; - } - - if (!priv->pi_enabled) { - /* Switch BB to PI mode to do IQ Calibration. */ - rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100); - rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100); - } - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 &= ~FPGA_RF_MODE_CCK; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); - rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); - - if (!priv->no_pape) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); - val32 |= (FPGA0_RF_PAPE | - (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); - } - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); - val32 &= ~BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); - val32 &= ~BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); - - if (priv->tx_paths > 1) { - rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000); - rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000); - } - - /* MAC settings */ - rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); - - /* Page B init */ - rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000); - - if (priv->tx_paths > 1) - rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000); - - /* IQ calibration setting */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8xxxu_iqk_path_a(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_A_2); - result[t][2] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_A_2); - result[t][3] = (val32 >> 16) & 0x3ff; - break; - } else if (i == (retry - 1) && path_a_ok == 0x01) { - /* TX IQK OK */ - dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n", - __func__); - - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A IQK failed!\n", __func__); - - if (priv->tx_paths > 1) { - /* - * Path A into standby - */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0); - rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Turn Path B ADDA on */ - rtl8xxxu_path_adda_on(priv, adda_regs, false); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8xxxu_iqk_path_b(priv); - if (path_b_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); - result[t][6] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); - result[t][7] = (val32 >> 16) & 0x3ff; - break; - } else if (i == (retry - 1) && path_b_ok == 0x01) { - /* TX IQK OK */ - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); - } - - /* Back to BB mode, load original value */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0); - - if (t) { - if (!priv->pi_enabled) { - /* - * Switch back BB to SI mode after finishing - * IQ Calibration - */ - val32 = 0x01000000; - rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32); - rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32); - } - - /* Reload ADDA power saving parameters */ - rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - - /* Reload MAC parameters */ - rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - - /* Reload BB parameters */ - rtl8xxxu_restore_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - - /* Restore RX initial gain */ - rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3); - - if (priv->tx_paths > 1) { - rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, - 0x00032ed3); - } - - /* Load 0xe30 IQC default value */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); - } -} - -static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok /*, path_b_ok */; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE - }; - u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; - u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt - */ - - if (t == 0) { - /* Save ADDA parameters, turn Path A ADDA on */ - rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - rtl8xxxu_save_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - } - - rtl8xxxu_path_adda_on(priv, adda_regs, true); - - /* MAC settings */ - rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); - - val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); - val32 |= 0x0f000000; - rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); - - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); - rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); - - /* - * RX IQ calibration setting for 8723B D cut large current issue - * when leaving IPS - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); - val32 |= 0x20; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8723bu_iqk_path_a(priv); - if (path_a_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8723bu_rx_iqk_path_a(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_A_2); - result[t][2] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_A_2); - result[t][3] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); - - if (priv->tx_paths > 1) { -#if 1 - dev_warn(dev, "%s: Path B not supported\n", __func__); -#else - - /* - * Path A into standby - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Turn Path B ADDA on */ - rtl8xxxu_path_adda_on(priv, adda_regs, false); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8xxxu_iqk_path_b(priv); - if (path_b_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8723bu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_B_2); - result[t][6] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_B_2); - result[t][7] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); -#endif - } - - /* Back to BB mode, load original value */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - if (t) { - /* Reload ADDA power saving parameters */ - rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - - /* Reload MAC parameters */ - rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - - /* Reload BB parameters */ - rtl8xxxu_restore_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - - /* Restore RX initial gain */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); - - if (priv->tx_paths > 1) { - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | xb_agc); - } - - /* Load 0xe30 IQC default value */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); - } -} - -static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok, path_b_ok; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING - }; - u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; - u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt - */ - - if (t == 0) { - /* Save ADDA parameters, turn Path A ADDA on */ - rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - rtl8xxxu_save_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - } - - rtl8xxxu_path_adda_on(priv, adda_regs, true); - - /* MAC settings */ - rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); - - val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); - val32 |= 0x0f000000; - rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); - - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); - rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); - val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); - val32 |= BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); - val32 |= BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8192eu_iqk_path_a(priv); - if (path_a_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8192eu_rx_iqk_path_a(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_A_2); - result[t][2] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_A_2); - result[t][3] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); - - if (priv->rf_paths > 1) { - /* Path A into standby */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Turn Path B ADDA on */ - rtl8xxxu_path_adda_on(priv, adda_regs, false); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8192eu_iqk_path_b(priv); - if (path_b_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8192eu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_B_2); - result[t][6] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_B_2); - result[t][7] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); - } - - /* Back to BB mode, load original value */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - if (t) { - /* Reload ADDA power saving parameters */ - rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - - /* Reload MAC parameters */ - rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - - /* Reload BB parameters */ - rtl8xxxu_restore_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - - /* Restore RX initial gain */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); - - if (priv->rf_paths > 1) { - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | xb_agc); - } - - /* Load 0xe30 IQC default value */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); - } -} - -static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) -{ - struct h2c_cmd h2c; - - if (priv->fops->mbox_ext_width < 4) - return; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; - h2c.bt_wlan_calibration.data = start; - - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); -} - -static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int result[4][8]; /* last is final result */ - int i, candidate; - bool path_a_ok, path_b_ok; - u32 reg_e94, reg_e9c, reg_ea4, reg_eac; - u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - s32 reg_tmp = 0; - bool simu; - - rtl8xxxu_prepare_calibrate(priv, 1); - - memset(result, 0, sizeof(result)); - candidate = -1; - - path_a_ok = false; - path_b_ok = false; - - rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - - for (i = 0; i < 3; i++) { - rtl8xxxu_phy_iqcalibrate(priv, result, i); - - if (i == 1) { - simu = rtl8xxxu_simularity_compare(priv, result, 0, 1); - if (simu) { - candidate = 0; - break; - } - } - - if (i == 2) { - simu = rtl8xxxu_simularity_compare(priv, result, 0, 2); - if (simu) { - candidate = 0; - break; - } - - simu = rtl8xxxu_simularity_compare(priv, result, 1, 2); - if (simu) { - candidate = 1; - } else { - for (i = 0; i < 8; i++) - reg_tmp += result[3][i]; - - if (reg_tmp) - candidate = 3; - else - candidate = -1; - } - } - } - - for (i = 0; i < 4; i++) { - reg_e94 = result[i][0]; - reg_e9c = result[i][1]; - reg_ea4 = result[i][2]; - reg_eac = result[i][3]; - reg_eb4 = result[i][4]; - reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; - } - - if (candidate >= 0) { - reg_e94 = result[candidate][0]; - priv->rege94 = reg_e94; - reg_e9c = result[candidate][1]; - priv->rege9c = reg_e9c; - reg_ea4 = result[candidate][2]; - reg_eac = result[candidate][3]; - reg_eb4 = result[candidate][4]; - priv->regeb4 = reg_eb4; - reg_ebc = result[candidate][5]; - priv->regebc = reg_ebc; - reg_ec4 = result[candidate][6]; - reg_ecc = result[candidate][7]; - dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); - dev_dbg(dev, - "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " - "ecc=%x\n ", __func__, reg_e94, reg_e9c, - reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); - path_a_ok = true; - path_b_ok = true; - } else { - reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; - reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; - } - - if (reg_e94 && candidate >= 0) - rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, - candidate, (reg_ea4 == 0)); - - if (priv->tx_paths > 1 && reg_eb4) - rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, - candidate, (reg_ec4 == 0)); - - rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - - rtl8xxxu_prepare_calibrate(priv, 0); -} - -static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int result[4][8]; /* last is final result */ - int i, candidate; - bool path_a_ok, path_b_ok; - u32 reg_e94, reg_e9c, reg_ea4, reg_eac; - u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - u32 val32, bt_control; - s32 reg_tmp = 0; - bool simu; - - rtl8xxxu_prepare_calibrate(priv, 1); - - memset(result, 0, sizeof(result)); - candidate = -1; - - path_a_ok = false; - path_b_ok = false; - - bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); - - for (i = 0; i < 3; i++) { - rtl8723bu_phy_iqcalibrate(priv, result, i); - - if (i == 1) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 1); - if (simu) { - candidate = 0; - break; - } - } - - if (i == 2) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 2); - if (simu) { - candidate = 0; - break; - } - - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 1, 2); - if (simu) { - candidate = 1; - } else { - for (i = 0; i < 8; i++) - reg_tmp += result[3][i]; - - if (reg_tmp) - candidate = 3; - else - candidate = -1; - } - } - } - - for (i = 0; i < 4; i++) { - reg_e94 = result[i][0]; - reg_e9c = result[i][1]; - reg_ea4 = result[i][2]; - reg_eac = result[i][3]; - reg_eb4 = result[i][4]; - reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; - } - - if (candidate >= 0) { - reg_e94 = result[candidate][0]; - priv->rege94 = reg_e94; - reg_e9c = result[candidate][1]; - priv->rege9c = reg_e9c; - reg_ea4 = result[candidate][2]; - reg_eac = result[candidate][3]; - reg_eb4 = result[candidate][4]; - priv->regeb4 = reg_eb4; - reg_ebc = result[candidate][5]; - priv->regebc = reg_ebc; - reg_ec4 = result[candidate][6]; - reg_ecc = result[candidate][7]; - dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); - dev_dbg(dev, - "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " - "ecc=%x\n ", __func__, reg_e94, reg_e9c, - reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); - path_a_ok = true; - path_b_ok = true; - } else { - reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; - reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; - } - - if (reg_e94 && candidate >= 0) - rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, - candidate, (reg_ea4 == 0)); - - if (priv->tx_paths > 1 && reg_eb4) - rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, - candidate, (reg_ec4 == 0)); - - rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); - val32 |= 0x20; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); - rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); - - if (priv->rf_paths > 1) - dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); - - rtl8xxxu_prepare_calibrate(priv, 0); -} - -static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int result[4][8]; /* last is final result */ - int i, candidate; - bool path_a_ok, path_b_ok; - u32 reg_e94, reg_e9c, reg_ea4, reg_eac; - u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - bool simu; - - memset(result, 0, sizeof(result)); - candidate = -1; - - path_a_ok = false; - path_b_ok = false; - - for (i = 0; i < 3; i++) { - rtl8192eu_phy_iqcalibrate(priv, result, i); - - if (i == 1) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 1); - if (simu) { - candidate = 0; - break; - } - } - - if (i == 2) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 2); - if (simu) { - candidate = 0; - break; - } - - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 1, 2); - if (simu) - candidate = 1; - else - candidate = 3; - } - } - - for (i = 0; i < 4; i++) { - reg_e94 = result[i][0]; - reg_e9c = result[i][1]; - reg_ea4 = result[i][2]; - reg_eac = result[i][3]; - reg_eb4 = result[i][4]; - reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; - } - - if (candidate >= 0) { - reg_e94 = result[candidate][0]; - priv->rege94 = reg_e94; - reg_e9c = result[candidate][1]; - priv->rege9c = reg_e9c; - reg_ea4 = result[candidate][2]; - reg_eac = result[candidate][3]; - reg_eb4 = result[candidate][4]; - priv->regeb4 = reg_eb4; - reg_ebc = result[candidate][5]; - priv->regebc = reg_ebc; - reg_ec4 = result[candidate][6]; - reg_ecc = result[candidate][7]; - dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); - dev_dbg(dev, - "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " - "ecc=%x\n ", __func__, reg_e94, reg_e9c, - reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); - path_a_ok = true; - path_b_ok = true; - } else { - reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; - reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; - } - - if (reg_e94 && candidate >= 0) - rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, - candidate, (reg_ea4 == 0)); - - if (priv->rf_paths > 1) - rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, - candidate, (reg_ec4 == 0)); - - rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, RTL8XXXU_BB_REGS); -} - -static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) -{ - u32 val32; - u32 rf_amode, rf_bmode = 0, lstf; - - /* Check continuous TX and Packet TX */ - lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); - - if (lstf & OFDM_LSTF_MASK) { - /* Disable all continuous TX */ - val32 = lstf & ~OFDM_LSTF_MASK; - rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); - - /* Read original RF mode Path A */ - rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC); - - /* Set RF mode to standby Path A */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, - (rf_amode & 0x8ffff) | 0x10000); - - /* Path-B */ - if (priv->tx_paths > 1) { - rf_bmode = rtl8xxxu_read_rfreg(priv, RF_B, - RF6052_REG_AC); - - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, - (rf_bmode & 0x8ffff) | 0x10000); - } - } else { - /* Deal with Packet TX case */ - /* block all queues */ - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - } - - /* Start LC calibration */ - if (priv->fops->has_s0s1) - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG); - val32 |= 0x08000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32); - - msleep(100); - - if (priv->fops->has_s0s1) - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0); - - /* Restore original parameters */ - if (lstf & OFDM_LSTF_MASK) { - /* Path-A */ - rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode); - - /* Path-B */ - if (priv->tx_paths > 1) - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, - rf_bmode); - } else /* Deal with Packet TX case */ - rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); -} - -static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv) -{ - int i; - u16 reg; - - reg = REG_MACID; - - for (i = 0; i < ETH_ALEN; i++) - rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]); - - return 0; -} - -static int rtl8xxxu_set_bssid(struct rtl8xxxu_priv *priv, const u8 *bssid) -{ - int i; - u16 reg; - - dev_dbg(&priv->udev->dev, "%s: (%pM)\n", __func__, bssid); - - reg = REG_BSSID; - - for (i = 0; i < ETH_ALEN; i++) - rtl8xxxu_write8(priv, reg + i, bssid[i]); - - return 0; -} - -static void -rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor) -{ - u8 vals[4] = { 0x41, 0xa8, 0x72, 0xb9 }; - u8 max_agg = 0xf; - int i; - - ampdu_factor = 1 << (ampdu_factor + 2); - if (ampdu_factor > max_agg) - ampdu_factor = max_agg; - - for (i = 0; i < 4; i++) { - if ((vals[i] & 0xf0) > (ampdu_factor << 4)) - vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4); - - if ((vals[i] & 0x0f) > ampdu_factor) - vals[i] = (vals[i] & 0xf0) | ampdu_factor; - - rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]); - } -} - -static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density) -{ - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE); - val8 &= 0xf8; - val8 |= density; - rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8); -} - -static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - int count, ret = 0; - - /* Start of rtl8723AU_card_enable_flow */ - /* Act to Cardemu sequence*/ - /* Turn off RF */ - rtl8xxxu_write8(priv, REG_RF_CTRL, 0); - - /* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */ - val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); - val8 &= ~LEDCFG2_DPDT_SELECT; - rtl8xxxu_write8(priv, REG_LEDCFG2, val8); - - /* 0x0005[1] = 1 turn off MAC by HW state machine*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - if ((val8 & BIT(1)) == 0) - break; - udelay(10); - } - - if (!count) { - dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", - __func__); - ret = -EBUSY; - goto exit; - } - - /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 |= SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 &= ~LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - -exit: - return ret; -} - -static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int count, ret = 0; - - /* Turn off RF */ - rtl8xxxu_write8(priv, REG_RF_CTRL, 0); - - /* Enable rising edge triggering interrupt */ - val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); - val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; - rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); - - /* Release WLON reset 0x04[16]= 1*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_WLON_RESET; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* 0x0005[1] = 1 turn off MAC by HW state machine*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - if ((val8 & BIT(1)) == 0) - break; - udelay(10); - } - - if (!count) { - dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", - __func__); - ret = -EBUSY; - goto exit; - } - - /* Enable BT control XTAL setting */ - val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); - val8 &= ~AFE_MISC_WL_XTAL_CTRL; - rtl8xxxu_write8(priv, REG_AFE_MISC, val8); - - /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 |= SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 &= ~LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - -exit: - return ret; -} - -static int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u8 val32; - int count, ret = 0; - - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - - /* - * Poll - wait for RX packet to complete - */ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, 0x5f8); - if (!val32) - break; - udelay(10); - } - - if (!count) { - dev_warn(&priv->udev->dev, - "%s: RX poll timed out (0x05f8)\n", __func__); - ret = -EBUSY; - goto exit; - } - - /* Disable CCK and OFDM, clock gated */ - val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); - val8 &= ~SYS_FUNC_BBRSTB; - rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); - - udelay(2); - - /* Reset baseband */ - val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); - val8 &= ~SYS_FUNC_BB_GLB_RSTN; - rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); - - /* Reset MAC TRX */ - val8 = rtl8xxxu_read8(priv, REG_CR); - val8 = CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE; - rtl8xxxu_write8(priv, REG_CR, val8); - - /* Reset MAC TRX */ - val8 = rtl8xxxu_read8(priv, REG_CR + 1); - val8 &= ~BIT(1); /* CR_SECURITY_ENABLE */ - rtl8xxxu_write8(priv, REG_CR + 1, val8); - - /* Respond TX OK to scheduler */ - val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST); - val8 |= DUAL_TSF_TX_OK; - rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8); - -exit: - return ret; -} - -static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - - /* Clear suspend enable and power down enable*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(7)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* 0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); - - /* 0x04[12:11] = 11 enable WL suspend*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); -} - -static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - - /* Clear suspend enable and power down enable*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); -} - -static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* disable HWPDN 0x04[15]=0*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(7); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable SW LPS 0x04[10]= 0 */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(2); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable WL suspend*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* wait till 0x04[17] = 1 power ready*/ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* release WLON reset 0x04[16]= 1*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - -exit: - return ret; -} - -static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 |= LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - - /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 &= ~BIT(4); - rtl8xxxu_write8(priv, 0x0067, val8); - - mdelay(1); - - /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* disable SW LPS 0x04[10]= 0 */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(2); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* wait till 0x04[17] = 1 power ready*/ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* release WLON reset 0x04[16]= 1*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* disable HWPDN 0x04[15]= 0*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(7); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable WL suspend*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */ - /* - * Note: Vendor driver actually clears this bit, despite the - * documentation claims it's being set! - */ - val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); - val8 |= LEDCFG2_DPDT_SELECT; - val8 &= ~LEDCFG2_DPDT_SELECT; - rtl8xxxu_write8(priv, REG_LEDCFG2, val8); - -exit: - return ret; -} - -static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 |= LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - - /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 &= ~BIT(4); - rtl8xxxu_write8(priv, 0x0067, val8); - - mdelay(1); - - /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* Disable SW LPS 0x04[10]= 0 */ - val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); - val32 &= ~APS_FSMCO_SW_LPS; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Wait until 0x04[17] = 1 power ready */ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* Release WLON reset 0x04[16]= 1*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_WLON_RESET; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Disable HWPDN 0x04[15]= 0*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 &= ~APS_FSMCO_HW_POWERDOWN; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Disable WL suspend*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* Enable WL control XTAL setting */ - val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); - val8 |= AFE_MISC_WL_XTAL_CTRL; - rtl8xxxu_write8(priv, REG_AFE_MISC, val8); - - /* Enable falling edge triggering interrupt */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); - - /* Enable GPIO9 interrupt mode */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); - - /* Enable GPIO9 input mode */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); - - /* Enable HSISR GPIO[C:0] interrupt */ - val8 = rtl8xxxu_read8(priv, REG_HSIMR); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_HSIMR, val8); - - /* Enable HSISR GPIO9 interrupt */ - val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); - - val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); - val8 |= MULTI_WIFI_HW_ROF_EN; - rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); - - /* For GPIO9 internal pull high setting BIT(14) */ - val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); - val8 |= BIT(6); - rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); - -exit: - return ret; -} - -static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) -{ - u8 val8; - - /* 0x0007[7:0] = 0x20 SOP option to disable BG/MB */ - rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20); - - /* 0x04[12:11] = 01 enable WL suspend */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(4); - val8 |= BIT(3); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(7); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); - - return 0; -} - -static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - u32 val32; - int retry, retval; - - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - - val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); - val32 |= RXPKT_NUM_RW_RELEASE_EN; - rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32); - - retry = 100; - retval = -EBUSY; - - do { - val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); - if (val32 & RXPKT_NUM_RXDMA_IDLE) { - retval = 0; - break; - } - } while (retry--); - - rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0); - rtl8xxxu_write32(priv, REG_RQPN, 0x80000000); - mdelay(2); - - if (!retry) - dev_warn(dev, "Failed to flush FIFO\n"); - - return retval; -} - -static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv) -{ - /* Fix USB interface interference issue */ - rtl8xxxu_write8(priv, 0xfe40, 0xe0); - rtl8xxxu_write8(priv, 0xfe41, 0x8d); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - /* - * This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits - * 8 and 5, for which I have found no documentation. - */ - rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320); - - /* - * Solve too many protocol error on USB bus. - * Can't do this for 8188/8192 UMC A cut parts - */ - if (!(!priv->chip_cut && priv->vendor_umc)) { - rtl8xxxu_write8(priv, 0xfe40, 0xe6); - rtl8xxxu_write8(priv, 0xfe41, 0x94); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe0); - rtl8xxxu_write8(priv, 0xfe41, 0x19); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe5); - rtl8xxxu_write8(priv, 0xfe41, 0x91); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe2); - rtl8xxxu_write8(priv, 0xfe41, 0x81); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - } -} - -static void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK); - val32 |= TXDMA_OFFSET_DROP_DATA_EN; - rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); -} - -static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int ret; - - /* - * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register - */ - rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - - rtl8723a_disabled_to_emu(priv); - - ret = rtl8723a_emu_to_active(priv); - if (ret) - goto exit; - - /* - * 0x0004[19] = 1, reset 8051 - */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(3); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - - /* For EFuse PG */ - val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); - val32 &= ~(BIT(28) | BIT(29) | BIT(30)); - val32 |= (0x06 << 28); - rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32); -exit: - return ret; -} - -static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int ret; - - rtl8723a_disabled_to_emu(priv); - - ret = rtl8723b_emu_to_active(priv); - if (ret) - goto exit; - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - - /* - * BT coexist power on settings. This is identical for 1 and 2 - * antenna parts. - */ - rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - /* Antenna inverse */ - rtl8xxxu_write8(priv, 0xfe08, 0x01); - - val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); - val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write16(priv, REG_PWR_DATA, val16); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 |= LEDCFG0_DPDT_SELECT; - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); -exit: - return ret; -} - -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int i; - - for (i = 100; i; i--) { - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO); - if (val8 & APS_FSMCO_PFM_ALDN) - break; - } - - if (!i) { - pr_info("%s: Poll failed\n", __func__); - return -ENODEV; - } - - /* - * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register - */ - rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b); - udelay(100); - - val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL); - if (!(val8 & LDOV12D_ENABLE)) { - pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8); - val8 |= LDOV12D_ENABLE; - rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8); - - udelay(100); - - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_MD2PP; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - } - - /* - * Auto enable WLAN - */ - val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); - val16 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); - - for (i = 1000; i; i--) { - val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); - if (!(val16 & APS_FSMCO_MAC_ENABLE)) - break; - } - if (!i) { - pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__); - return -EBUSY; - } - - /* - * Enable radio, GPIO, LED - */ - val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN | - APS_FSMCO_PFM_ALDN; - rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); - - /* - * Release RF digital isolation - */ - val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); - val16 &= ~SYS_ISO_DIOR; - rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); - - val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); - val8 &= ~APSD_CTRL_OFF; - rtl8xxxu_write8(priv, REG_APSD_CTRL, val8); - for (i = 200; i; i--) { - val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); - if (!(val8 & APSD_CTRL_OFF_STATUS)) - break; - } - - if (!i) { - pr_info("%s: APSD_CTRL poll failed\n", __func__); - return -EBUSY; - } - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE | - CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE; - rtl8xxxu_write16(priv, REG_CR, val16); - - rtl8xxxu_write8(priv, 0xfe10, 0x19); - - /* - * Workaround for 8188RU LNA power leakage problem. - */ - if (priv->rtl_chip == RTL8188R) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); - val32 &= ~BIT(1); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); - } - return 0; -} - -#endif - -/* - * This is needed for 8723bu as well, presumable - */ -static void rtl8192e_crystal_afe_adjust(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - - /* - * 40Mhz crystal source, MAC 0x28[2]=0 - */ - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - val8 &= 0xfb; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - - val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); - val32 &= 0xfffffc7f; - rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); - - /* - * 92e AFE parameter - * AFE PLL KVCO selection, MAC 0x28[6]=1 - */ - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - val8 &= 0xbf; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - - /* - * AFE PLL KVCO selection, MAC 0x78[21]=0 - */ - val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); - val32 &= 0xffdfffff; - rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); -} - -static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv) -{ - u16 val16; - u32 val32; - int ret; - - ret = 0; - - val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); - if (val32 & SYS_CFG_SPS_LDO_SEL) { - rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3); - } else { - /* - * Raise 1.2V voltage - */ - val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL); - val32 &= 0xff0fffff; - val32 |= 0x00500000; - rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32); - rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83); - } - - /* - * Adjust AFE before enabling PLL - */ - rtl8192e_crystal_afe_adjust(priv); - rtl8192e_disabled_to_emu(priv); - - ret = rtl8192e_emu_to_active(priv); - if (ret) - goto exit; - - rtl8xxxu_write16(priv, REG_CR, 0x0000); - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - -exit: - return ret; -} - -static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - - /* - * Workaround for 8188RU LNA power leakage problem. - */ - if (priv->rtl_chip == RTL8188R) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); - val32 |= BIT(1); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); - } - - rtl8xxxu_flush_fifo(priv); - - rtl8xxxu_active_to_lps(priv); - - /* Turn off RF */ - rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00); - - /* Reset Firmware if running in RAM */ - if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) - rtl8xxxu_firmware_self_reset(priv); - - /* Reset MCU */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - /* Reset MCU ready status */ - rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); - - rtl8xxxu_active_to_emu(priv); - rtl8xxxu_emu_to_disabled(priv); - - /* Reset MCU IO Wrapper */ - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - /* RSV_CTRL 0x1C[7:0] = 0x0e lock ISO/CLK/Power control register */ - rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e); -} - -static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - rtl8xxxu_flush_fifo(priv); - - /* - * Disable TX report timer - */ - val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); - val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); - - rtl8xxxu_write8(priv, REG_CR, 0x0000); - - rtl8xxxu_active_to_lps(priv); - - /* Reset Firmware if running in RAM */ - if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) - rtl8xxxu_firmware_self_reset(priv); - - /* Reset MCU */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - /* Reset MCU ready status */ - rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); - - rtl8723bu_active_to_emu(priv); - - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); -} - -#ifdef NEED_PS_TDMA -static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, - u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5) -{ - struct h2c_cmd h2c; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA; - h2c.b_type_dma.data1 = arg1; - h2c.b_type_dma.data2 = arg2; - h2c.b_type_dma.data3 = arg3; - h2c.b_type_dma.data4 = arg4; - h2c.b_type_dma.data5 = arg5; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); -} -#endif - -static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv) -{ - u32 val32; - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); - val8 |= BIT(5); - rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); - - /* - * WLAN action by PTA - */ - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(24); - val32 |= BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - /* - * Fix external switch Main->S1, Aux->S0 - */ - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); -} - -static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) -{ - struct h2c_cmd h2c; - u32 val32; - u8 val8; - - /* - * No indication anywhere as to what 0x0790 does. The 2 antenna - * vendor code preserves bits 6-7 here. - */ - rtl8xxxu_write8(priv, 0x0790, 0x05); - /* - * 0x0778 seems to be related to enabling the number of antennas - * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it - * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 - */ - rtl8xxxu_write8(priv, 0x0778, 0x01); - - val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); - val8 |= BIT(5); - rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); - - rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ - - /* - * Set BT grant to low - */ - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; - h2c.bt_grant.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); - - /* - * WLAN action by PTA - */ - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - - /* - * BT select S0/S1 controlled by WiFi - */ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 |= BIT(5); - rtl8xxxu_write8(priv, 0x0067, val8); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); - - /* - * Bits 6/7 are marked in/out ... but for what? - */ - rtl8xxxu_write8(priv, 0x0974, 0xff); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(24); - val32 |= BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - /* - * Fix external switch Main->S1, Aux->S0 - */ - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; - h2c.ant_sel_rsv.ant_inverse = 1; - h2c.ant_sel_rsv.int_switch_type = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); - - /* - * 0x280, 0x00, 0x200, 0x80 - not clear - */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - - /* - * Software control, antenna at WiFi side - */ -#ifdef NEED_PS_TDMA - rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); -#endif - - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); - rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_info.cmd = H2C_8723B_BT_INFO; - h2c.bt_info.data = BIT(0); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; - h2c.ignore_wlan.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); -} - -static void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); - val32 &= ~(BIT(22) | BIT(23)); - rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); -} - -static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) -{ - u32 agg_rx; - u8 agg_ctrl; - - /* - * For now simply disable RX aggregation - */ - agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); - agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; - - agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); - agg_rx &= ~RXDMA_USB_AGG_ENABLE; - agg_rx &= ~0xff0f; - - rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); - rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); -} - -static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - /* Time duration for NHM unit: 4us, 0x2710=40ms */ - rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); - rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); - rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); - rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); - /* TH8 */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 |= 0xff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - /* Enable CCK */ - val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); - val32 |= BIT(8) | BIT(9) | BIT(10); - rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); - /* Max power amongst all RX antennas */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); - val32 |= BIT(7); - rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); -} - -static void rtl8xxxu_old_init_queue_reserved_page(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - - if (priv->ep_tx_normal_queue) - val8 = TX_PAGE_NUM_NORM_PQ; - else - val8 = 0; - - rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); - - val32 = (TX_PAGE_NUM_PUBQ << RQPN_PUB_PQ_SHIFT) | RQPN_LOAD; - - if (priv->ep_tx_high_queue) - val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); - if (priv->ep_tx_low_queue) - val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); - - rtl8xxxu_write32(priv, REG_RQPN, val32); -} - -static void rtl8xxxu_init_queue_reserved_page(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_fileops *fops = priv->fops; - u32 hq, lq, nq, eq, pubq; - u32 val32; - - hq = 0; - lq = 0; - nq = 0; - eq = 0; - pubq = 0; - - if (priv->ep_tx_high_queue) - hq = fops->page_num_hi; - if (priv->ep_tx_low_queue) - lq = fops->page_num_lo; - if (priv->ep_tx_normal_queue) - nq = fops->page_num_norm; - - val32 = (nq << RQPN_NPQ_SHIFT) | (eq << RQPN_EPQ_SHIFT); - rtl8xxxu_write32(priv, REG_RQPN_NPQ, val32); - - pubq = fops->total_page_num - hq - lq - nq; - - val32 = RQPN_LOAD; - val32 |= (hq << RQPN_HI_PQ_SHIFT); - val32 |= (lq << RQPN_LO_PQ_SHIFT); - val32 |= (pubq << RQPN_PUB_PQ_SHIFT); - - rtl8xxxu_write32(priv, REG_RQPN, val32); -} - -static int rtl8xxxu_init_device(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - bool macpower; - int ret; - u8 val8; - u16 val16; - u32 val32; - - /* Check if MAC is already powered on */ - val8 = rtl8xxxu_read8(priv, REG_CR); - - /* - * Fix 92DU-VC S3 hang with the reason is that secondary mac is not - * initialized. First MAC returns 0xea, second MAC returns 0x00 - */ - if (val8 == 0xea) - macpower = false; - else - macpower = true; - - ret = priv->fops->power_on(priv); - if (ret < 0) { - dev_warn(dev, "%s: Failed power on\n", __func__); - goto exit; - } - - if (!macpower) { - if (priv->fops->total_page_num) - rtl8xxxu_init_queue_reserved_page(priv); - else - rtl8xxxu_old_init_queue_reserved_page(priv); - } - - ret = rtl8xxxu_init_queue_priority(priv); - dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); - if (ret) - goto exit; - - /* - * Set RX page boundary - */ - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary); - - ret = rtl8xxxu_download_firmware(priv); - dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret); - if (ret) - goto exit; - ret = rtl8xxxu_start_firmware(priv); - dev_dbg(dev, "%s: start_fiwmare %i\n", __func__, ret); - if (ret) - goto exit; - - if (priv->fops->phy_init_antenna_selection) - priv->fops->phy_init_antenna_selection(priv); - - ret = rtl8xxxu_init_mac(priv); - - dev_dbg(dev, "%s: init_mac %i\n", __func__, ret); - if (ret) - goto exit; - - ret = rtl8xxxu_init_phy_bb(priv); - dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret); - if (ret) - goto exit; - - ret = priv->fops->init_phy_rf(priv); - if (ret) - goto exit; - - /* RFSW Control - clear bit 14 ?? */ - if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) - rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); - - val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW | - FPGA0_RF_ANTSWB | - ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT); - if (!priv->no_pape) { - val32 |= (FPGA0_RF_PAPE | - (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); - } - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); - - /* 0x860[6:5]= 00 - why? - this sets antenna B */ - if (priv->rtl_chip != RTL8192E) - rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210); - - if (!macpower) { - /* - * Set TX buffer boundary - */ - if (priv->rtl_chip == RTL8192E) - val8 = TX_TOTAL_PAGE_NUM_8192E + 1; - else - val8 = TX_TOTAL_PAGE_NUM + 1; - - if (priv->rtl_chip == RTL8723B) - val8 -= 1; - - rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); - rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); - rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8); - rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8); - rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8); - } - - /* - * The vendor drivers set PBP for all devices, except 8192e. - * There is no explanation for this in any of the sources. - */ - val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) | - (priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT); - if (priv->rtl_chip != RTL8192E) - rtl8xxxu_write8(priv, REG_PBP, val8); - - dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); - if (!macpower) { - ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); - if (ret) { - dev_warn(dev, "%s: LLT table init failed\n", __func__); - goto exit; - } - - /* - * Chip specific quirks - */ - priv->fops->usb_quirks(priv); - - /* - * Presumably this is for 8188EU as well - * Enable TX report and TX report timer - */ - if (priv->rtl_chip == RTL8723B) { - val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); - val8 |= TX_REPORT_CTRL_TIMER_ENABLE; - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); - /* Set MAX RPT MACID */ - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02); - /* TX report Timer. Unit: 32us */ - rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0); - - /* tmp ps ? */ - val8 = rtl8xxxu_read8(priv, 0xa3); - val8 &= 0xf8; - rtl8xxxu_write8(priv, 0xa3, val8); - } - } - - /* - * Unit in 8 bytes, not obvious what it is used for - */ - rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4); - - if (priv->rtl_chip == RTL8192E) { - rtl8xxxu_write32(priv, REG_HIMR0, 0x00); - rtl8xxxu_write32(priv, REG_HIMR1, 0x00); - } else { - /* - * Enable all interrupts - not obvious USB needs to do this - */ - rtl8xxxu_write32(priv, REG_HISR, 0xffffffff); - rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff); - } - - rtl8xxxu_set_mac(priv); - rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION); - - /* - * Configure initial WMAC settings - */ - val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST | - RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL | - RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; - rtl8xxxu_write32(priv, REG_RCR, val32); - - /* - * Accept all multicast - */ - rtl8xxxu_write32(priv, REG_MAR, 0xffffffff); - rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff); - - /* - * Init adaptive controls - */ - val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); - val32 &= ~RESPONSE_RATE_BITMAP_ALL; - val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M; - rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); - - /* CCK = 0x0a, OFDM = 0x10 */ - rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10); - rtl8xxxu_set_retry(priv, 0x30, 0x30); - rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10); - - /* - * Init EDCA - */ - rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a); - - /* Set CCK SIFS */ - rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a); - - /* Set OFDM SIFS */ - rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a); - - /* TXOP */ - rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b); - rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f); - rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324); - rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226); - - /* Set data auto rate fallback retry count */ - rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000); - rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404); - rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201); - rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605); - - val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL); - val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY; - rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8); - - /* Set ACK timeout */ - rtl8xxxu_write8(priv, REG_ACKTO, 0x40); - - /* - * Initialize beacon parameters - */ - val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8); - rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16); - rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404); - rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME); - rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME); - rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F); - - /* - * Initialize burst parameters - */ - if (priv->rtl_chip == RTL8723B) { - /* - * For USB high speed set 512B packets - */ - val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B); - val8 &= ~(BIT(4) | BIT(5)); - val8 |= BIT(4); - val8 |= BIT(1) | BIT(2) | BIT(3); - rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8); - - /* - * For USB high speed set 512B packets - */ - val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B); - val8 |= BIT(7); - rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); - - rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); - rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e); - rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); - rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); - rtl8xxxu_write8(priv, REG_PIFS, 0x00); - rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50); - rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 |= BIT(5) | BIT(6); - rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); - } - - if (priv->fops->init_aggregation) - priv->fops->init_aggregation(priv); - - /* - * Enable CCK and OFDM block - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM); - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - - /* - * Invalidate all CAM entries - bit 30 is undocumented - */ - rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30)); - - /* - * Start out with default power levels for channel 6, 20MHz - */ - priv->fops->set_tx_power(priv, 1, false); - - /* Let the 8051 take control of antenna setting */ - if (priv->rtl_chip != RTL8192E) { - val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); - val8 |= LEDCFG2_DPDT_SELECT; - rtl8xxxu_write8(priv, REG_LEDCFG2, val8); - } - - rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff); - - /* Disable BAR - not sure if this has any effect on USB */ - rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff); - - rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); - - if (priv->fops->init_statistics) - priv->fops->init_statistics(priv); - - if (priv->rtl_chip == RTL8192E) { - /* - * 0x4c6[3] 1: RTS BW = Data BW - * 0: RTS BW depends on CCA / secondary CCA result. - */ - val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL); - val8 &= ~BIT(3); - rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8); - /* - * Reset USB mode switch setting - */ - rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00); - } - - rtl8723a_phy_lc_calibrate(priv); - - priv->fops->phy_iq_calibrate(priv); - - /* - * This should enable thermal meter - */ - if (priv->fops->tx_desc_size == sizeof(struct rtl8xxxu_txdesc40)) - rtl8xxxu_write_rfreg(priv, - RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); - else - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); - - /* Set NAV_UPPER to 30000us */ - val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT); - rtl8xxxu_write8(priv, REG_NAV_UPPER, val8); - - if (priv->rtl_chip == RTL8723A) { - /* - * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test, - * but we need to find root cause. - * This is 8723au only. - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - if ((val32 & 0xff000000) != 0x83000000) { - val32 |= FPGA_RF_MODE_CCK; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); - } - } else if (priv->rtl_chip == RTL8192E) { - rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00); - } - - val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL); - val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK; - /* ack for xmit mgmt frames. */ - rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32); - - if (priv->rtl_chip == RTL8192E) { - /* - * Fix LDPC rx hang issue. - */ - val32 = rtl8xxxu_read32(priv, REG_AFE_MISC); - rtl8xxxu_write8(priv, REG_8192E_LDOV12_CTRL, 0x75); - val32 &= 0xfff00fff; - val32 |= 0x0007e000; - rtl8xxxu_write32(priv, REG_AFE_MISC, val32); - } -exit: - return ret; -} - -static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv, - struct ieee80211_key_conf *key, const u8 *mac) -{ - u32 cmd, val32, addr, ctrl; - int j, i, tmp_debug; - - tmp_debug = rtl8xxxu_debug; - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_KEY) - rtl8xxxu_debug |= RTL8XXXU_DEBUG_REG_WRITE; - - /* - * This is a bit of a hack - the lower bits of the cipher - * suite selector happens to match the cipher index in the CAM - */ - addr = key->keyidx << CAM_CMD_KEY_SHIFT; - ctrl = (key->cipher & 0x0f) << 2 | key->keyidx | CAM_WRITE_VALID; - - for (j = 5; j >= 0; j--) { - switch (j) { - case 0: - val32 = ctrl | (mac[0] << 16) | (mac[1] << 24); - break; - case 1: - val32 = mac[2] | (mac[3] << 8) | - (mac[4] << 16) | (mac[5] << 24); - break; - default: - i = (j - 2) << 2; - val32 = key->key[i] | (key->key[i + 1] << 8) | - key->key[i + 2] << 16 | key->key[i + 3] << 24; - break; - } - - rtl8xxxu_write32(priv, REG_CAM_WRITE, val32); - cmd = CAM_CMD_POLLING | CAM_CMD_WRITE | (addr + j); - rtl8xxxu_write32(priv, REG_CAM_CMD, cmd); - udelay(100); - } - - rtl8xxxu_debug = tmp_debug; -} - -static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, const u8 *mac) -{ - struct rtl8xxxu_priv *priv = hw->priv; - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); - val8 |= BEACON_DISABLE_TSF_UPDATE; - rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); -} - -static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rtl8xxxu_priv *priv = hw->priv; - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); - val8 &= ~BEACON_DISABLE_TSF_UPDATE; - rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); -} - -static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, int sgi) -{ - struct h2c_cmd h2c; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - - h2c.ramask.cmd = H2C_SET_RATE_MASK; - h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff); - h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16); - - h2c.ramask.arg = 0x80; - if (sgi) - h2c.ramask.arg |= 0x20; - - dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", - __func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask)); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); -} - -static void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, int sgi) -{ - struct h2c_cmd h2c; - u8 bw = 0; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - - h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID; - h2c.b_macid_cfg.ramask0 = ramask & 0xff; - h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff; - h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff; - h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff; - - h2c.ramask.arg = 0x80; - h2c.b_macid_cfg.data1 = 0; - if (sgi) - h2c.b_macid_cfg.data1 |= BIT(7); - - h2c.b_macid_cfg.data2 = bw; - - dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", - __func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg)); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); -} - -static void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, - u8 macid, bool connect) -{ - struct h2c_cmd h2c; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - - h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT; - - if (connect) - h2c.joinbss.data = H2C_JOIN_BSS_CONNECT; - else - h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; - - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); -} - -static void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, - u8 macid, bool connect) -{ - struct h2c_cmd h2c; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - - h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT; - if (connect) - h2c.media_status_rpt.parm |= BIT(0); - else - h2c.media_status_rpt.parm &= ~BIT(0); - - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); -} - -static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg) -{ - u32 val32; - u8 rate_idx = 0; - - rate_cfg &= RESPONSE_RATE_BITMAP_ALL; - - val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); - val32 &= ~RESPONSE_RATE_BITMAP_ALL; - val32 |= rate_cfg; - rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); - - dev_dbg(&priv->udev->dev, "%s: rates %08x\n", __func__, rate_cfg); - - while (rate_cfg) { - rate_cfg = (rate_cfg >> 1); - rate_idx++; - } - rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx); -} - -static void -rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, u32 changed) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - struct ieee80211_sta *sta; - u32 val32; - u8 val8; - - if (changed & BSS_CHANGED_ASSOC) { - dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc); - - rtl8xxxu_set_linktype(priv, vif->type); - - if (bss_conf->assoc) { - u32 ramask; - int sgi = 0; - - rcu_read_lock(); - sta = ieee80211_find_sta(vif, bss_conf->bssid); - if (!sta) { - dev_info(dev, "%s: ASSOC no sta found\n", - __func__); - rcu_read_unlock(); - goto error; - } - - if (sta->ht_cap.ht_supported) - dev_info(dev, "%s: HT supported\n", __func__); - if (sta->vht_cap.vht_supported) - dev_info(dev, "%s: VHT supported\n", __func__); - - /* TODO: Set bits 28-31 for rate adaptive id */ - ramask = (sta->supp_rates[0] & 0xfff) | - sta->ht_cap.mcs.rx_mask[0] << 12 | - sta->ht_cap.mcs.rx_mask[1] << 20; - if (sta->ht_cap.cap & - (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)) - sgi = 1; - rcu_read_unlock(); - - priv->fops->update_rate_mask(priv, ramask, sgi); - - rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); - - rtl8723a_stop_tx_beacon(priv); - - /* joinbss sequence */ - rtl8xxxu_write16(priv, REG_BCN_PSR_RPT, - 0xc000 | bss_conf->aid); - - priv->fops->report_connect(priv, 0, true); - } else { - val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); - val8 |= BEACON_DISABLE_TSF_UPDATE; - rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); - - priv->fops->report_connect(priv, 0, false); - } - } - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - dev_dbg(dev, "Changed ERP_PREAMBLE: Use short preamble %i\n", - bss_conf->use_short_preamble); - val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); - if (bss_conf->use_short_preamble) - val32 |= RSR_ACK_SHORT_PREAMBLE; - else - val32 &= ~RSR_ACK_SHORT_PREAMBLE; - rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - dev_dbg(dev, "Changed ERP_SLOT: short_slot_time %i\n", - bss_conf->use_short_slot); - - if (bss_conf->use_short_slot) - val8 = 9; - else - val8 = 20; - rtl8xxxu_write8(priv, REG_SLOT, val8); - } - - if (changed & BSS_CHANGED_BSSID) { - dev_dbg(dev, "Changed BSSID!\n"); - rtl8xxxu_set_bssid(priv, bss_conf->bssid); - } - - if (changed & BSS_CHANGED_BASIC_RATES) { - dev_dbg(dev, "Changed BASIC_RATES!\n"); - rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates); - } -error: - return; -} - -static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue) -{ - u32 rtlqueue; - - switch (queue) { - case IEEE80211_AC_VO: - rtlqueue = TXDESC_QUEUE_VO; - break; - case IEEE80211_AC_VI: - rtlqueue = TXDESC_QUEUE_VI; - break; - case IEEE80211_AC_BE: - rtlqueue = TXDESC_QUEUE_BE; - break; - case IEEE80211_AC_BK: - rtlqueue = TXDESC_QUEUE_BK; - break; - default: - rtlqueue = TXDESC_QUEUE_BE; - } - - return rtlqueue; -} - -static u32 rtl8xxxu_queue_select(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - u32 queue; - - if (ieee80211_is_mgmt(hdr->frame_control)) - queue = TXDESC_QUEUE_MGNT; - else - queue = rtl8xxxu_80211_to_rtl_queue(skb_get_queue_mapping(skb)); - - return queue; -} - -/* - * Despite newer chips 8723b/8812/8821 having a larger TX descriptor - * format. The descriptor checksum is still only calculated over the - * initial 32 bytes of the descriptor! - */ -static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_txdesc32 *tx_desc) -{ - __le16 *ptr = (__le16 *)tx_desc; - u16 csum = 0; - int i; - - /* - * Clear csum field before calculation, as the csum field is - * in the middle of the struct. - */ - tx_desc->csum = cpu_to_le16(0); - - for (i = 0; i < (sizeof(struct rtl8xxxu_txdesc32) / sizeof(u16)); i++) - csum = csum ^ le16_to_cpu(ptr[i]); - - tx_desc->csum |= cpu_to_le16(csum); -} - -static void rtl8xxxu_free_tx_resources(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_tx_urb *tx_urb, *tmp; - unsigned long flags; - - spin_lock_irqsave(&priv->tx_urb_lock, flags); - list_for_each_entry_safe(tx_urb, tmp, &priv->tx_urb_free_list, list) { - list_del(&tx_urb->list); - priv->tx_urb_free_count--; - usb_free_urb(&tx_urb->urb); - } - spin_unlock_irqrestore(&priv->tx_urb_lock, flags); -} - -static struct rtl8xxxu_tx_urb * -rtl8xxxu_alloc_tx_urb(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_tx_urb *tx_urb; - unsigned long flags; - - spin_lock_irqsave(&priv->tx_urb_lock, flags); - tx_urb = list_first_entry_or_null(&priv->tx_urb_free_list, - struct rtl8xxxu_tx_urb, list); - if (tx_urb) { - list_del(&tx_urb->list); - priv->tx_urb_free_count--; - if (priv->tx_urb_free_count < RTL8XXXU_TX_URB_LOW_WATER && - !priv->tx_stopped) { - priv->tx_stopped = true; - ieee80211_stop_queues(priv->hw); - } - } - - spin_unlock_irqrestore(&priv->tx_urb_lock, flags); - - return tx_urb; -} - -static void rtl8xxxu_free_tx_urb(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_tx_urb *tx_urb) -{ - unsigned long flags; - - INIT_LIST_HEAD(&tx_urb->list); - - spin_lock_irqsave(&priv->tx_urb_lock, flags); - - list_add(&tx_urb->list, &priv->tx_urb_free_list); - priv->tx_urb_free_count++; - if (priv->tx_urb_free_count > RTL8XXXU_TX_URB_HIGH_WATER && - priv->tx_stopped) { - priv->tx_stopped = false; - ieee80211_wake_queues(priv->hw); - } - - spin_unlock_irqrestore(&priv->tx_urb_lock, flags); -} - -static void rtl8xxxu_tx_complete(struct urb *urb) -{ - struct sk_buff *skb = (struct sk_buff *)urb->context; - struct ieee80211_tx_info *tx_info; - struct ieee80211_hw *hw; - struct rtl8xxxu_priv *priv; - struct rtl8xxxu_tx_urb *tx_urb = - container_of(urb, struct rtl8xxxu_tx_urb, urb); - - tx_info = IEEE80211_SKB_CB(skb); - hw = tx_info->rate_driver_data[0]; - priv = hw->priv; - - skb_pull(skb, priv->fops->tx_desc_size); - - ieee80211_tx_info_clear_status(tx_info); - tx_info->status.rates[0].idx = -1; - tx_info->status.rates[0].count = 0; - - if (!urb->status) - tx_info->flags |= IEEE80211_TX_STAT_ACK; - - ieee80211_tx_status_irqsafe(hw, skb); - - rtl8xxxu_free_tx_urb(priv, tx_urb); -} - -static void rtl8xxxu_dump_action(struct device *dev, - struct ieee80211_hdr *hdr) -{ - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)hdr; - u16 cap, timeout; - - if (!(rtl8xxxu_debug & RTL8XXXU_DEBUG_ACTION)) - return; - - switch (mgmt->u.action.u.addba_resp.action_code) { - case WLAN_ACTION_ADDBA_RESP: - cap = le16_to_cpu(mgmt->u.action.u.addba_resp.capab); - timeout = le16_to_cpu(mgmt->u.action.u.addba_resp.timeout); - dev_info(dev, "WLAN_ACTION_ADDBA_RESP: " - "timeout %i, tid %02x, buf_size %02x, policy %02x, " - "status %02x\n", - timeout, - (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2, - (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6, - (cap >> 1) & 0x1, - le16_to_cpu(mgmt->u.action.u.addba_resp.status)); - break; - case WLAN_ACTION_ADDBA_REQ: - cap = le16_to_cpu(mgmt->u.action.u.addba_req.capab); - timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout); - dev_info(dev, "WLAN_ACTION_ADDBA_REQ: " - "timeout %i, tid %02x, buf_size %02x, policy %02x\n", - timeout, - (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2, - (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6, - (cap >> 1) & 0x1); - break; - default: - dev_info(dev, "action frame %02x\n", - mgmt->u.action.u.addba_resp.action_code); - break; - } -} - -static void rtl8xxxu_tx(struct ieee80211_hw *hw, - struct ieee80211_tx_control *control, - struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info); - struct rtl8xxxu_priv *priv = hw->priv; - struct rtl8xxxu_txdesc32 *tx_desc; - struct rtl8xxxu_txdesc40 *tx_desc40; - struct rtl8xxxu_tx_urb *tx_urb; - struct ieee80211_sta *sta = NULL; - struct ieee80211_vif *vif = tx_info->control.vif; - struct device *dev = &priv->udev->dev; - u32 queue, rate; - u16 pktlen = skb->len; - u16 seq_number; - u16 rate_flag = tx_info->control.rates[0].flags; - int tx_desc_size = priv->fops->tx_desc_size; - int ret; - bool usedesc40, ampdu_enable; - - if (skb_headroom(skb) < tx_desc_size) { - dev_warn(dev, - "%s: Not enough headroom (%i) for tx descriptor\n", - __func__, skb_headroom(skb)); - goto error; - } - - if (unlikely(skb->len > (65535 - tx_desc_size))) { - dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n", - __func__, skb->len); - goto error; - } - - tx_urb = rtl8xxxu_alloc_tx_urb(priv); - if (!tx_urb) { - dev_warn(dev, "%s: Unable to allocate tx urb\n", __func__); - goto error; - } - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX) - dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n", - __func__, tx_rate->bitrate, tx_rate->hw_value, pktlen); - - if (ieee80211_is_action(hdr->frame_control)) - rtl8xxxu_dump_action(dev, hdr); - - usedesc40 = (tx_desc_size == 40); - tx_info->rate_driver_data[0] = hw; - - if (control && control->sta) - sta = control->sta; - - tx_desc = (struct rtl8xxxu_txdesc32 *)skb_push(skb, tx_desc_size); - - memset(tx_desc, 0, tx_desc_size); - tx_desc->pkt_size = cpu_to_le16(pktlen); - tx_desc->pkt_offset = tx_desc_size; - - tx_desc->txdw0 = - TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT; - if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) || - is_broadcast_ether_addr(ieee80211_get_DA(hdr))) - tx_desc->txdw0 |= TXDESC_BROADMULTICAST; - - queue = rtl8xxxu_queue_select(hw, skb); - tx_desc->txdw1 = cpu_to_le32(queue << TXDESC_QUEUE_SHIFT); - - if (tx_info->control.hw_key) { - switch (tx_info->control.hw_key->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - case WLAN_CIPHER_SUITE_TKIP: - tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_RC4); - break; - case WLAN_CIPHER_SUITE_CCMP: - tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_AES); - break; - default: - break; - } - } - - /* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */ - ampdu_enable = false; - if (ieee80211_is_data_qos(hdr->frame_control) && sta) { - if (sta->ht_cap.ht_supported) { - u32 ampdu, val32; - - ampdu = (u32)sta->ht_cap.ampdu_density; - val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT; - tx_desc->txdw2 |= cpu_to_le32(val32); - - ampdu_enable = true; - } - } - - if (rate_flag & IEEE80211_TX_RC_MCS) - rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0; - else - rate = tx_rate->hw_value; - - seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)); - if (!usedesc40) { - tx_desc->txdw5 = cpu_to_le32(rate); - - if (ieee80211_is_data(hdr->frame_control)) - tx_desc->txdw5 |= cpu_to_le32(0x0001ff00); - - tx_desc->txdw3 = - cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT); - - if (ampdu_enable) - tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE); - else - tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK); - - if (ieee80211_is_mgmt(hdr->frame_control)) { - tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value); - tx_desc->txdw4 |= - cpu_to_le32(TXDESC32_USE_DRIVER_RATE); - tx_desc->txdw5 |= - cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT); - tx_desc->txdw5 |= - cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE); - } - - if (ieee80211_is_data_qos(hdr->frame_control)) - tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS); - - if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || - (sta && vif && vif->bss_conf.use_short_preamble)) - tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE); - - if (rate_flag & IEEE80211_TX_RC_SHORT_GI || - (ieee80211_is_data_qos(hdr->frame_control) && - sta && sta->ht_cap.cap & - (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) { - tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI); - } - - if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { - /* - * Use RTS rate 24M - does the mac80211 tell - * us which to use? - */ - tx_desc->txdw4 |= - cpu_to_le32(DESC_RATE_24M << - TXDESC32_RTS_RATE_SHIFT); - tx_desc->txdw4 |= - cpu_to_le32(TXDESC32_RTS_CTS_ENABLE); - tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE); - } - } else { - tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc; - - tx_desc40->txdw4 = cpu_to_le32(rate); - if (ieee80211_is_data(hdr->frame_control)) { - tx_desc->txdw4 |= - cpu_to_le32(0x1f << - TXDESC40_DATA_RATE_FB_SHIFT); - } - - tx_desc40->txdw9 = - cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT); - - if (ampdu_enable) - tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE); - else - tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK); - - if (ieee80211_is_mgmt(hdr->frame_control)) { - tx_desc40->txdw4 = cpu_to_le32(tx_rate->hw_value); - tx_desc40->txdw3 |= - cpu_to_le32(TXDESC40_USE_DRIVER_RATE); - tx_desc40->txdw4 |= - cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT); - tx_desc40->txdw4 |= - cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE); - } - - if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || - (sta && vif && vif->bss_conf.use_short_preamble)) - tx_desc40->txdw5 |= - cpu_to_le32(TXDESC40_SHORT_PREAMBLE); - - if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { - /* - * Use RTS rate 24M - does the mac80211 tell - * us which to use? - */ - tx_desc->txdw4 |= - cpu_to_le32(DESC_RATE_24M << - TXDESC40_RTS_RATE_SHIFT); - tx_desc->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE); - tx_desc->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE); - } - } - - rtl8xxxu_calc_tx_desc_csum(tx_desc); - - usb_fill_bulk_urb(&tx_urb->urb, priv->udev, priv->pipe_out[queue], - skb->data, skb->len, rtl8xxxu_tx_complete, skb); - - usb_anchor_urb(&tx_urb->urb, &priv->tx_anchor); - ret = usb_submit_urb(&tx_urb->urb, GFP_ATOMIC); - if (ret) { - usb_unanchor_urb(&tx_urb->urb); - rtl8xxxu_free_tx_urb(priv, tx_urb); - goto error; - } - return; -error: - dev_kfree_skb(skb); -} - -static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv, - struct ieee80211_rx_status *rx_status, - struct rtl8723au_phy_stats *phy_stats, - u32 rxmcs) -{ - if (phy_stats->sgi_en) - rx_status->flag |= RX_FLAG_SHORT_GI; - - if (rxmcs < DESC_RATE_6M) { - /* - * Handle PHY stats for CCK rates - */ - u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a; - - switch (cck_agc_rpt & 0xc0) { - case 0xc0: - rx_status->signal = -46 - (cck_agc_rpt & 0x3e); - break; - case 0x80: - rx_status->signal = -26 - (cck_agc_rpt & 0x3e); - break; - case 0x40: - rx_status->signal = -12 - (cck_agc_rpt & 0x3e); - break; - case 0x00: - rx_status->signal = 16 - (cck_agc_rpt & 0x3e); - break; - } - } else { - rx_status->signal = - (phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110; - } -} - -static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_rx_urb *rx_urb, *tmp; - unsigned long flags; - - spin_lock_irqsave(&priv->rx_urb_lock, flags); - - list_for_each_entry_safe(rx_urb, tmp, - &priv->rx_urb_pending_list, list) { - list_del(&rx_urb->list); - priv->rx_urb_pending_count--; - usb_free_urb(&rx_urb->urb); - } - - spin_unlock_irqrestore(&priv->rx_urb_lock, flags); -} - -static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rx_urb *rx_urb) -{ - struct sk_buff *skb; - unsigned long flags; - int pending = 0; - - spin_lock_irqsave(&priv->rx_urb_lock, flags); - - if (!priv->shutdown) { - list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list); - priv->rx_urb_pending_count++; - pending = priv->rx_urb_pending_count; - } else { - skb = (struct sk_buff *)rx_urb->urb.context; - dev_kfree_skb(skb); - usb_free_urb(&rx_urb->urb); - } - - spin_unlock_irqrestore(&priv->rx_urb_lock, flags); - - if (pending > RTL8XXXU_RX_URB_PENDING_WATER) - schedule_work(&priv->rx_urb_wq); -} - -static void rtl8xxxu_rx_urb_work(struct work_struct *work) -{ - struct rtl8xxxu_priv *priv; - struct rtl8xxxu_rx_urb *rx_urb, *tmp; - struct list_head local; - struct sk_buff *skb; - unsigned long flags; - int ret; - - priv = container_of(work, struct rtl8xxxu_priv, rx_urb_wq); - INIT_LIST_HEAD(&local); - - spin_lock_irqsave(&priv->rx_urb_lock, flags); - - list_splice_init(&priv->rx_urb_pending_list, &local); - priv->rx_urb_pending_count = 0; - - spin_unlock_irqrestore(&priv->rx_urb_lock, flags); - - list_for_each_entry_safe(rx_urb, tmp, &local, list) { - list_del_init(&rx_urb->list); - ret = rtl8xxxu_submit_rx_urb(priv, rx_urb); - /* - * If out of memory or temporary error, put it back on the - * queue and try again. Otherwise the device is dead/gone - * and we should drop it. - */ - switch (ret) { - case 0: - break; - case -ENOMEM: - case -EAGAIN: - rtl8xxxu_queue_rx_urb(priv, rx_urb); - break; - default: - pr_info("failed to requeue urb %i\n", ret); - skb = (struct sk_buff *)rx_urb->urb.context; - dev_kfree_skb(skb); - usb_free_urb(&rx_urb->urb); - } - } -} - -static int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, - struct sk_buff *skb, - struct ieee80211_rx_status *rx_status) -{ - struct rtl8xxxu_rxdesc16 *rx_desc = - (struct rtl8xxxu_rxdesc16 *)skb->data; - struct rtl8723au_phy_stats *phy_stats; - __le32 *_rx_desc_le = (__le32 *)skb->data; - u32 *_rx_desc = (u32 *)skb->data; - int drvinfo_sz, desc_shift; - int i; - - for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++) - _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]); - - skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16)); - - phy_stats = (struct rtl8723au_phy_stats *)skb->data; - - drvinfo_sz = rx_desc->drvinfo_sz * 8; - desc_shift = rx_desc->shift; - skb_pull(skb, drvinfo_sz + desc_shift); - - if (rx_desc->phy_stats) - rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, - rx_desc->rxmcs); - - rx_status->mactime = le32_to_cpu(rx_desc->tsfl); - rx_status->flag |= RX_FLAG_MACTIME_START; - - if (!rx_desc->swdec) - rx_status->flag |= RX_FLAG_DECRYPTED; - if (rx_desc->crc32) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - if (rx_desc->bw) - rx_status->flag |= RX_FLAG_40MHZ; - - if (rx_desc->rxht) { - rx_status->flag |= RX_FLAG_HT; - rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; - } else { - rx_status->rate_idx = rx_desc->rxmcs; - } - - return RX_TYPE_DATA_PKT; -} - -static int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, - struct sk_buff *skb, - struct ieee80211_rx_status *rx_status) -{ - struct rtl8xxxu_rxdesc24 *rx_desc = - (struct rtl8xxxu_rxdesc24 *)skb->data; - struct rtl8723au_phy_stats *phy_stats; - __le32 *_rx_desc_le = (__le32 *)skb->data; - u32 *_rx_desc = (u32 *)skb->data; - int drvinfo_sz, desc_shift; - int i; - - for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc24) / sizeof(u32)); i++) - _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]); - - skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc24)); - - phy_stats = (struct rtl8723au_phy_stats *)skb->data; - - drvinfo_sz = rx_desc->drvinfo_sz * 8; - desc_shift = rx_desc->shift; - skb_pull(skb, drvinfo_sz + desc_shift); - - if (rx_desc->rpt_sel) { - struct device *dev = &priv->udev->dev; - dev_dbg(dev, "%s: C2H packet\n", __func__); - return RX_TYPE_C2H; - } - - if (rx_desc->phy_stats) - rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, - rx_desc->rxmcs); - - rx_status->mactime = le32_to_cpu(rx_desc->tsfl); - rx_status->flag |= RX_FLAG_MACTIME_START; - - if (!rx_desc->swdec) - rx_status->flag |= RX_FLAG_DECRYPTED; - if (rx_desc->crc32) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - if (rx_desc->bw) - rx_status->flag |= RX_FLAG_40MHZ; - - if (rx_desc->rxmcs >= DESC_RATE_MCS0) { - rx_status->flag |= RX_FLAG_HT; - rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; - } else { - rx_status->rate_idx = rx_desc->rxmcs; - } - - return RX_TYPE_DATA_PKT; -} - -static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv, - struct sk_buff *skb) -{ - struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data; - struct device *dev = &priv->udev->dev; - int len; - - len = skb->len - 2; - - dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n", - c2h->id, c2h->seq, len, c2h->bt_info.response_source); - - switch(c2h->id) { - case C2H_8723B_BT_INFO: - if (c2h->bt_info.response_source > - BT_INFO_SRC_8723B_BT_ACTIVE_SEND) - dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n"); - else - dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n"); - - if (c2h->bt_info.bt_has_reset) - dev_dbg(dev, "BT has been reset\n"); - if (c2h->bt_info.tx_rx_mask) - dev_dbg(dev, "BT TRx mask\n"); - - break; - case C2H_8723B_BT_MP_INFO: - dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n", - c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status); - break; - case C2H_8723B_RA_REPORT: - dev_dbg(dev, - "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n", - c2h->ra_report.rate, c2h->ra_report.dummy0_0, - c2h->ra_report.macid, c2h->ra_report.noisy_state); - break; - default: - dev_info(dev, "Unhandled C2H event %02x seq %02x\n", - c2h->id, c2h->seq); - print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE, - 16, 1, c2h->raw.payload, len, false); - break; - } -} - -static void rtl8xxxu_rx_complete(struct urb *urb) -{ - struct rtl8xxxu_rx_urb *rx_urb = - container_of(urb, struct rtl8xxxu_rx_urb, urb); - struct ieee80211_hw *hw = rx_urb->hw; - struct rtl8xxxu_priv *priv = hw->priv; - struct sk_buff *skb = (struct sk_buff *)urb->context; - struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); - struct device *dev = &priv->udev->dev; - int rx_type; - - skb_put(skb, urb->actual_length); - - if (urb->status == 0) { - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - - rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status); - - rx_status->freq = hw->conf.chandef.chan->center_freq; - rx_status->band = hw->conf.chandef.chan->band; - - if (rx_type == RX_TYPE_DATA_PKT) - ieee80211_rx_irqsafe(hw, skb); - else { - rtl8723bu_handle_c2h(priv, skb); - dev_kfree_skb(skb); - } - - skb = NULL; - rx_urb->urb.context = NULL; - rtl8xxxu_queue_rx_urb(priv, rx_urb); - } else { - dev_dbg(dev, "%s: status %i\n", __func__, urb->status); - goto cleanup; - } - return; - -cleanup: - usb_free_urb(urb); - dev_kfree_skb(skb); - return; -} - -static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rx_urb *rx_urb) -{ - struct sk_buff *skb; - int skb_size; - int ret, rx_desc_sz; - - rx_desc_sz = priv->fops->rx_desc_size; - skb_size = rx_desc_sz + RTL_RX_BUFFER_SIZE; - skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL); - if (!skb) - return -ENOMEM; - - memset(skb->data, 0, rx_desc_sz); - usb_fill_bulk_urb(&rx_urb->urb, priv->udev, priv->pipe_in, skb->data, - skb_size, rtl8xxxu_rx_complete, skb); - usb_anchor_urb(&rx_urb->urb, &priv->rx_anchor); - ret = usb_submit_urb(&rx_urb->urb, GFP_ATOMIC); - if (ret) - usb_unanchor_urb(&rx_urb->urb); - return ret; -} - -static void rtl8xxxu_int_complete(struct urb *urb) -{ - struct rtl8xxxu_priv *priv = (struct rtl8xxxu_priv *)urb->context; - struct device *dev = &priv->udev->dev; - int ret; - - dev_dbg(dev, "%s: status %i\n", __func__, urb->status); - if (urb->status == 0) { - usb_anchor_urb(urb, &priv->int_anchor); - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret) - usb_unanchor_urb(urb); - } else { - dev_info(dev, "%s: Error %i\n", __func__, urb->status); - } -} - - -static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct urb *urb; - u32 val32; - int ret; - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return -ENOMEM; - - usb_fill_int_urb(urb, priv->udev, priv->pipe_interrupt, - priv->int_buf, USB_INTR_CONTENT_LENGTH, - rtl8xxxu_int_complete, priv, 1); - usb_anchor_urb(urb, &priv->int_anchor); - ret = usb_submit_urb(urb, GFP_KERNEL); - if (ret) { - usb_unanchor_urb(urb); - goto error; - } - - val32 = rtl8xxxu_read32(priv, REG_USB_HIMR); - val32 |= USB_HIMR_CPWM; - rtl8xxxu_write32(priv, REG_USB_HIMR, val32); - -error: - return ret; -} - -static int rtl8xxxu_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rtl8xxxu_priv *priv = hw->priv; - int ret; - u8 val8; - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - rtl8723a_stop_tx_beacon(priv); - - val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); - val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE | - BEACON_DISABLE_TSF_UPDATE; - rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); - ret = 0; - break; - default: - ret = -EOPNOTSUPP; - } - - rtl8xxxu_set_linktype(priv, vif->type); - - return ret; -} - -static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rtl8xxxu_priv *priv = hw->priv; - - dev_dbg(&priv->udev->dev, "%s\n", __func__); -} - -static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - u16 val16; - int ret = 0, channel; - bool ht40; - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL) - dev_info(dev, - "%s: channel: %i (changed %08x chandef.width %02x)\n", - __func__, hw->conf.chandef.chan->hw_value, - changed, hw->conf.chandef.width); - - if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { - val16 = ((hw->conf.long_frame_max_tx_count << - RETRY_LIMIT_LONG_SHIFT) & RETRY_LIMIT_LONG_MASK) | - ((hw->conf.short_frame_max_tx_count << - RETRY_LIMIT_SHORT_SHIFT) & RETRY_LIMIT_SHORT_MASK); - rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16); - } - - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - switch (hw->conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - ht40 = false; - break; - case NL80211_CHAN_WIDTH_40: - ht40 = true; - break; - default: - ret = -ENOTSUPP; - goto exit; - } - - channel = hw->conf.chandef.chan->hw_value; - - priv->fops->set_tx_power(priv, channel, ht40); - - priv->fops->config_channel(hw); - } - -exit: - return ret; -} - -static int rtl8xxxu_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue, - const struct ieee80211_tx_queue_params *param) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - u32 val32; - u8 aifs, acm_ctrl, acm_bit; - - aifs = param->aifs; - - val32 = aifs | - fls(param->cw_min) << EDCA_PARAM_ECW_MIN_SHIFT | - fls(param->cw_max) << EDCA_PARAM_ECW_MAX_SHIFT | - (u32)param->txop << EDCA_PARAM_TXOP_SHIFT; - - acm_ctrl = rtl8xxxu_read8(priv, REG_ACM_HW_CTRL); - dev_dbg(dev, - "%s: IEEE80211 queue %02x val %08x, acm %i, acm_ctrl %02x\n", - __func__, queue, val32, param->acm, acm_ctrl); - - switch (queue) { - case IEEE80211_AC_VO: - acm_bit = ACM_HW_CTRL_VO; - rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, val32); - break; - case IEEE80211_AC_VI: - acm_bit = ACM_HW_CTRL_VI; - rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, val32); - break; - case IEEE80211_AC_BE: - acm_bit = ACM_HW_CTRL_BE; - rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, val32); - break; - case IEEE80211_AC_BK: - acm_bit = ACM_HW_CTRL_BK; - rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, val32); - break; - default: - acm_bit = 0; - break; - } - - if (param->acm) - acm_ctrl |= acm_bit; - else - acm_ctrl &= ~acm_bit; - rtl8xxxu_write8(priv, REG_ACM_HW_CTRL, acm_ctrl); - - return 0; -} - -static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, u64 multicast) -{ - struct rtl8xxxu_priv *priv = hw->priv; - u32 rcr = rtl8xxxu_read32(priv, REG_RCR); - - dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n", - __func__, changed_flags, *total_flags); - - /* - * FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR) - */ - - if (*total_flags & FIF_FCSFAIL) - rcr |= RCR_ACCEPT_CRC32; - else - rcr &= ~RCR_ACCEPT_CRC32; - - /* - * FIF_PLCPFAIL not supported? - */ - - if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - rcr &= ~RCR_CHECK_BSSID_BEACON; - else - rcr |= RCR_CHECK_BSSID_BEACON; - - if (*total_flags & FIF_CONTROL) - rcr |= RCR_ACCEPT_CTRL_FRAME; - else - rcr &= ~RCR_ACCEPT_CTRL_FRAME; - - if (*total_flags & FIF_OTHER_BSS) { - rcr |= RCR_ACCEPT_AP; - rcr &= ~RCR_CHECK_BSSID_MATCH; - } else { - rcr &= ~RCR_ACCEPT_AP; - rcr |= RCR_CHECK_BSSID_MATCH; - } - - if (*total_flags & FIF_PSPOLL) - rcr |= RCR_ACCEPT_PM; - else - rcr &= ~RCR_ACCEPT_PM; - - /* - * FIF_PROBE_REQ ignored as probe requests always seem to be accepted - */ - - rtl8xxxu_write32(priv, REG_RCR, rcr); - - *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC | - FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL | - FIF_PROBE_REQ); -} - -static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts) -{ - if (rts > 2347) - return -EINVAL; - - return 0; -} - -static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - u8 mac_addr[ETH_ALEN]; - u8 val8; - u16 val16; - u32 val32; - int retval = -EOPNOTSUPP; - - dev_dbg(dev, "%s: cmd %02x, cipher %08x, index %i\n", - __func__, cmd, key->cipher, key->keyidx); - - if (vif->type != NL80211_IFTYPE_STATION) - return -EOPNOTSUPP; - - if (key->keyidx > 3) - return -EOPNOTSUPP; - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - - break; - case WLAN_CIPHER_SUITE_CCMP: - key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; - break; - case WLAN_CIPHER_SUITE_TKIP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - default: - return -EOPNOTSUPP; - } - - if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { - dev_dbg(dev, "%s: pairwise key\n", __func__); - ether_addr_copy(mac_addr, sta->addr); - } else { - dev_dbg(dev, "%s: group key\n", __func__); - eth_broadcast_addr(mac_addr); - } - - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= CR_SECURITY_ENABLE; - rtl8xxxu_write16(priv, REG_CR, val16); - - val8 = SEC_CFG_TX_SEC_ENABLE | SEC_CFG_TXBC_USE_DEFKEY | - SEC_CFG_RX_SEC_ENABLE | SEC_CFG_RXBC_USE_DEFKEY; - val8 |= SEC_CFG_TX_USE_DEFKEY | SEC_CFG_RX_USE_DEFKEY; - rtl8xxxu_write8(priv, REG_SECURITY_CFG, val8); - - switch (cmd) { - case SET_KEY: - key->hw_key_idx = key->keyidx; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - rtl8xxxu_cam_write(priv, key, mac_addr); - retval = 0; - break; - case DISABLE_KEY: - rtl8xxxu_write32(priv, REG_CAM_WRITE, 0x00000000); - val32 = CAM_CMD_POLLING | CAM_CMD_WRITE | - key->keyidx << CAM_CMD_KEY_SHIFT; - rtl8xxxu_write32(priv, REG_CAM_CMD, val32); - retval = 0; - break; - default: - dev_warn(dev, "%s: Unsupported command %02x\n", __func__, cmd); - } - - return retval; -} - -static int -rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_ampdu_params *params) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct device *dev = &priv->udev->dev; - u8 ampdu_factor, ampdu_density; - struct ieee80211_sta *sta = params->sta; - enum ieee80211_ampdu_mlme_action action = params->action; - - switch (action) { - case IEEE80211_AMPDU_TX_START: - dev_info(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__); - ampdu_factor = sta->ht_cap.ampdu_factor; - ampdu_density = sta->ht_cap.ampdu_density; - rtl8xxxu_set_ampdu_factor(priv, ampdu_factor); - rtl8xxxu_set_ampdu_min_space(priv, ampdu_density); - dev_dbg(dev, - "Changed HT: ampdu_factor %02x, ampdu_density %02x\n", - ampdu_factor, ampdu_density); - break; - case IEEE80211_AMPDU_TX_STOP_FLUSH: - dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__); - rtl8xxxu_set_ampdu_factor(priv, 0); - rtl8xxxu_set_ampdu_min_space(priv, 0); - break; - case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: - dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n", - __func__); - rtl8xxxu_set_ampdu_factor(priv, 0); - rtl8xxxu_set_ampdu_min_space(priv, 0); - break; - case IEEE80211_AMPDU_RX_START: - dev_info(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__); - break; - case IEEE80211_AMPDU_RX_STOP: - dev_info(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__); - break; - default: - break; - } - return 0; -} - -static int rtl8xxxu_start(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - struct rtl8xxxu_rx_urb *rx_urb; - struct rtl8xxxu_tx_urb *tx_urb; - unsigned long flags; - int ret, i; - - ret = 0; - - init_usb_anchor(&priv->rx_anchor); - init_usb_anchor(&priv->tx_anchor); - init_usb_anchor(&priv->int_anchor); - - priv->fops->enable_rf(priv); - if (priv->usb_interrupts) { - ret = rtl8xxxu_submit_int_urb(hw); - if (ret) - goto exit; - } - - for (i = 0; i < RTL8XXXU_TX_URBS; i++) { - tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL); - if (!tx_urb) { - if (!i) - ret = -ENOMEM; - - goto error_out; - } - usb_init_urb(&tx_urb->urb); - INIT_LIST_HEAD(&tx_urb->list); - tx_urb->hw = hw; - list_add(&tx_urb->list, &priv->tx_urb_free_list); - priv->tx_urb_free_count++; - } - - priv->tx_stopped = false; - - spin_lock_irqsave(&priv->rx_urb_lock, flags); - priv->shutdown = false; - spin_unlock_irqrestore(&priv->rx_urb_lock, flags); - - for (i = 0; i < RTL8XXXU_RX_URBS; i++) { - rx_urb = kmalloc(sizeof(struct rtl8xxxu_rx_urb), GFP_KERNEL); - if (!rx_urb) { - if (!i) - ret = -ENOMEM; - - goto error_out; - } - usb_init_urb(&rx_urb->urb); - INIT_LIST_HEAD(&rx_urb->list); - rx_urb->hw = hw; - - ret = rtl8xxxu_submit_rx_urb(priv, rx_urb); - } -exit: - /* - * Accept all data and mgmt frames - */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); - rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff); - - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e); - - return ret; - -error_out: - rtl8xxxu_free_tx_resources(priv); - /* - * Disable all data and mgmt frames - */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); - rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000); - - return ret; -} - -static void rtl8xxxu_stop(struct ieee80211_hw *hw) -{ - struct rtl8xxxu_priv *priv = hw->priv; - unsigned long flags; - - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - - rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000); - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); - - spin_lock_irqsave(&priv->rx_urb_lock, flags); - priv->shutdown = true; - spin_unlock_irqrestore(&priv->rx_urb_lock, flags); - - usb_kill_anchored_urbs(&priv->rx_anchor); - usb_kill_anchored_urbs(&priv->tx_anchor); - if (priv->usb_interrupts) - usb_kill_anchored_urbs(&priv->int_anchor); - - rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); - - priv->fops->disable_rf(priv); - - /* - * Disable interrupts - */ - if (priv->usb_interrupts) - rtl8xxxu_write32(priv, REG_USB_HIMR, 0); - - rtl8xxxu_free_rx_resources(priv); - rtl8xxxu_free_tx_resources(priv); -} - -static const struct ieee80211_ops rtl8xxxu_ops = { - .tx = rtl8xxxu_tx, - .add_interface = rtl8xxxu_add_interface, - .remove_interface = rtl8xxxu_remove_interface, - .config = rtl8xxxu_config, - .conf_tx = rtl8xxxu_conf_tx, - .bss_info_changed = rtl8xxxu_bss_info_changed, - .configure_filter = rtl8xxxu_configure_filter, - .set_rts_threshold = rtl8xxxu_set_rts_threshold, - .start = rtl8xxxu_start, - .stop = rtl8xxxu_stop, - .sw_scan_start = rtl8xxxu_sw_scan_start, - .sw_scan_complete = rtl8xxxu_sw_scan_complete, - .set_key = rtl8xxxu_set_key, - .ampdu_action = rtl8xxxu_ampdu_action, -}; - -static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv, - struct usb_interface *interface) -{ - struct usb_interface_descriptor *interface_desc; - struct usb_host_interface *host_interface; - struct usb_endpoint_descriptor *endpoint; - struct device *dev = &priv->udev->dev; - int i, j = 0, endpoints; - u8 dir, xtype, num; - int ret = 0; - - host_interface = &interface->altsetting[0]; - interface_desc = &host_interface->desc; - endpoints = interface_desc->bNumEndpoints; - - for (i = 0; i < endpoints; i++) { - endpoint = &host_interface->endpoint[i].desc; - - dir = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; - num = usb_endpoint_num(endpoint); - xtype = usb_endpoint_type(endpoint); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) - dev_dbg(dev, - "%s: endpoint: dir %02x, # %02x, type %02x\n", - __func__, dir, num, xtype); - if (usb_endpoint_dir_in(endpoint) && - usb_endpoint_xfer_bulk(endpoint)) { - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) - dev_dbg(dev, "%s: in endpoint num %i\n", - __func__, num); - - if (priv->pipe_in) { - dev_warn(dev, - "%s: Too many IN pipes\n", __func__); - ret = -EINVAL; - goto exit; - } - - priv->pipe_in = usb_rcvbulkpipe(priv->udev, num); - } - - if (usb_endpoint_dir_in(endpoint) && - usb_endpoint_xfer_int(endpoint)) { - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) - dev_dbg(dev, "%s: interrupt endpoint num %i\n", - __func__, num); - - if (priv->pipe_interrupt) { - dev_warn(dev, "%s: Too many INTERRUPT pipes\n", - __func__); - ret = -EINVAL; - goto exit; - } - - priv->pipe_interrupt = usb_rcvintpipe(priv->udev, num); - } - - if (usb_endpoint_dir_out(endpoint) && - usb_endpoint_xfer_bulk(endpoint)) { - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) - dev_dbg(dev, "%s: out endpoint num %i\n", - __func__, num); - if (j >= RTL8XXXU_OUT_ENDPOINTS) { - dev_warn(dev, - "%s: Too many OUT pipes\n", __func__); - ret = -EINVAL; - goto exit; - } - priv->out_ep[j++] = num; - } - } -exit: - priv->nr_out_eps = j; - return ret; -} - -static int rtl8xxxu_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct rtl8xxxu_priv *priv; - struct ieee80211_hw *hw; - struct usb_device *udev; - struct ieee80211_supported_band *sband; - int ret = 0; - int untested = 1; - - udev = usb_get_dev(interface_to_usbdev(interface)); - - switch (id->idVendor) { - case USB_VENDOR_ID_REALTEK: - switch(id->idProduct) { - case 0x1724: - case 0x8176: - case 0x8178: - case 0x817f: - untested = 0; - break; - } - break; - case 0x7392: - if (id->idProduct == 0x7811) - untested = 0; - break; - case 0x050d: - if (id->idProduct == 0x1004) - untested = 0; - break; - default: - break; - } - - if (untested) { - rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE; - dev_info(&udev->dev, - "This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n", - id->idVendor, id->idProduct); - dev_info(&udev->dev, - "Please report results to Jes.Sorensen@gmail.com\n"); - } - - hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops); - if (!hw) { - ret = -ENOMEM; - goto exit; - } - - priv = hw->priv; - priv->hw = hw; - priv->udev = udev; - priv->fops = (struct rtl8xxxu_fileops *)id->driver_info; - mutex_init(&priv->usb_buf_mutex); - mutex_init(&priv->h2c_mutex); - INIT_LIST_HEAD(&priv->tx_urb_free_list); - spin_lock_init(&priv->tx_urb_lock); - INIT_LIST_HEAD(&priv->rx_urb_pending_list); - spin_lock_init(&priv->rx_urb_lock); - INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work); - - usb_set_intfdata(interface, hw); - - ret = rtl8xxxu_parse_usb(priv, interface); - if (ret) - goto exit; - - ret = rtl8xxxu_identify_chip(priv); - if (ret) { - dev_err(&udev->dev, "Fatal - failed to identify chip\n"); - goto exit; - } - - ret = rtl8xxxu_read_efuse(priv); - if (ret) { - dev_err(&udev->dev, "Fatal - failed to read EFuse\n"); - goto exit; - } - - ret = priv->fops->parse_efuse(priv); - if (ret) { - dev_err(&udev->dev, "Fatal - failed to parse EFuse\n"); - goto exit; - } - - rtl8xxxu_print_chipinfo(priv); - - ret = priv->fops->load_firmware(priv); - if (ret) { - dev_err(&udev->dev, "Fatal - failed to load firmware\n"); - goto exit; - } - - ret = rtl8xxxu_init_device(hw); - - hw->wiphy->max_scan_ssids = 1; - hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - hw->queues = 4; - - sband = &rtl8xxxu_supported_band; - sband->ht_cap.ht_supported = true; - sband->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; - sband->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; - sband->ht_cap.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40; - memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs)); - sband->ht_cap.mcs.rx_mask[0] = 0xff; - sband->ht_cap.mcs.rx_mask[4] = 0x01; - if (priv->rf_paths > 1) { - sband->ht_cap.mcs.rx_mask[1] = 0xff; - sband->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; - } - sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; - /* - * Some APs will negotiate HT20_40 in a noisy environment leading - * to miserable performance. Rather than defaulting to this, only - * enable it if explicitly requested at module load time. - */ - if (rtl8xxxu_ht40_2g) { - dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n"); - sband->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - } - hw->wiphy->bands[NL80211_BAND_2GHZ] = sband; - - hw->wiphy->rts_threshold = 2347; - - SET_IEEE80211_DEV(priv->hw, &interface->dev); - SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr); - - hw->extra_tx_headroom = priv->fops->tx_desc_size; - ieee80211_hw_set(hw, SIGNAL_DBM); - /* - * The firmware handles rate control - */ - ieee80211_hw_set(hw, HAS_RATE_CONTROL); - ieee80211_hw_set(hw, AMPDU_AGGREGATION); - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - dev_err(&udev->dev, "%s: Failed to register: %i\n", - __func__, ret); - goto exit; - } - -exit: - if (ret < 0) - usb_put_dev(udev); - return ret; -} - -static void rtl8xxxu_disconnect(struct usb_interface *interface) -{ - struct rtl8xxxu_priv *priv; - struct ieee80211_hw *hw; - - hw = usb_get_intfdata(interface); - priv = hw->priv; - - ieee80211_unregister_hw(hw); - - priv->fops->power_off(priv); - - usb_set_intfdata(interface, NULL); - - dev_info(&priv->udev->dev, "disconnecting\n"); - - kfree(priv->fw_data); - mutex_destroy(&priv->usb_buf_mutex); - mutex_destroy(&priv->h2c_mutex); - - usb_put_dev(priv->udev); - ieee80211_free_hw(hw); -} - -static struct rtl8xxxu_fileops rtl8723au_fops = { - .parse_efuse = rtl8723au_parse_efuse, - .load_firmware = rtl8723au_load_firmware, - .power_on = rtl8723au_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_init_llt_table, - .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, - .init_phy_rf = rtl8723au_init_phy_rf, - .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen1_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc16, - .enable_rf = rtl8xxxu_gen1_enable_rf, - .disable_rf = rtl8xxxu_gen1_disable_rf, - .usb_quirks = rtl8xxxu_gen1_usb_quirks, - .set_tx_power = rtl8xxxu_gen1_set_tx_power, - .update_rate_mask = rtl8xxxu_update_rate_mask, - .report_connect = rtl8xxxu_gen1_report_connect, - .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), - .adda_1t_init = 0x0b1b25a0, - .adda_1t_path_on = 0x0bdb25a0, - .adda_2t_path_on_a = 0x04db25a4, - .adda_2t_path_on_b = 0x0b1b25a4, - .trxff_boundary = 0x27ff, - .pbp_rx = PBP_PAGE_SIZE_128, - .pbp_tx = PBP_PAGE_SIZE_128, - .mactable = rtl8xxxu_gen1_mac_init_table, -}; - -static struct rtl8xxxu_fileops rtl8723bu_fops = { - .parse_efuse = rtl8723bu_parse_efuse, - .load_firmware = rtl8723bu_load_firmware, - .power_on = rtl8723bu_power_on, - .power_off = rtl8723bu_power_off, - .reset_8051 = rtl8723bu_reset_8051, - .llt_init = rtl8xxxu_auto_llt_table, - .init_phy_bb = rtl8723bu_init_phy_bb, - .init_phy_rf = rtl8723bu_init_phy_rf, - .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, - .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen2_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc24, - .init_aggregation = rtl8723bu_init_aggregation, - .init_statistics = rtl8723bu_init_statistics, - .enable_rf = rtl8723b_enable_rf, - .disable_rf = rtl8xxxu_gen2_disable_rf, - .usb_quirks = rtl8xxxu_gen2_usb_quirks, - .set_tx_power = rtl8723b_set_tx_power, - .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, - .report_connect = rtl8xxxu_gen2_report_connect, - .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), - .has_s0s1 = 1, - .adda_1t_init = 0x01c00014, - .adda_1t_path_on = 0x01c00014, - .adda_2t_path_on_a = 0x01c00014, - .adda_2t_path_on_b = 0x01c00014, - .trxff_boundary = 0x3f7f, - .pbp_rx = PBP_PAGE_SIZE_256, - .pbp_tx = PBP_PAGE_SIZE_256, - .mactable = rtl8723b_mac_init_table, -}; - -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static struct rtl8xxxu_fileops rtl8192cu_fops = { - .parse_efuse = rtl8192cu_parse_efuse, - .load_firmware = rtl8192cu_load_firmware, - .power_on = rtl8192cu_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_init_llt_table, - .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, - .init_phy_rf = rtl8192cu_init_phy_rf, - .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen1_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc16, - .enable_rf = rtl8xxxu_gen1_enable_rf, - .disable_rf = rtl8xxxu_gen1_disable_rf, - .usb_quirks = rtl8xxxu_gen1_usb_quirks, - .set_tx_power = rtl8xxxu_gen1_set_tx_power, - .update_rate_mask = rtl8xxxu_update_rate_mask, - .report_connect = rtl8xxxu_gen1_report_connect, - .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), - .adda_1t_init = 0x0b1b25a0, - .adda_1t_path_on = 0x0bdb25a0, - .adda_2t_path_on_a = 0x04db25a4, - .adda_2t_path_on_b = 0x0b1b25a4, - .trxff_boundary = 0x27ff, - .pbp_rx = PBP_PAGE_SIZE_128, - .pbp_tx = PBP_PAGE_SIZE_128, - .mactable = rtl8xxxu_gen1_mac_init_table, -}; - -#endif - -static struct rtl8xxxu_fileops rtl8192eu_fops = { - .parse_efuse = rtl8192eu_parse_efuse, - .load_firmware = rtl8192eu_load_firmware, - .power_on = rtl8192eu_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_auto_llt_table, - .init_phy_bb = rtl8192eu_init_phy_bb, - .init_phy_rf = rtl8192eu_init_phy_rf, - .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen2_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc24, - .enable_rf = rtl8192e_enable_rf, - .disable_rf = rtl8xxxu_gen2_disable_rf, - .usb_quirks = rtl8xxxu_gen2_usb_quirks, - .set_tx_power = rtl8192e_set_tx_power, - .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, - .report_connect = rtl8xxxu_gen2_report_connect, - .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), - .has_s0s1 = 0, - .adda_1t_init = 0x0fc01616, - .adda_1t_path_on = 0x0fc01616, - .adda_2t_path_on_a = 0x0fc01616, - .adda_2t_path_on_b = 0x0fc01616, - .trxff_boundary = 0x3cff, - .mactable = rtl8192e_mac_init_table, - .total_page_num = TX_TOTAL_PAGE_NUM_8192E, - .page_num_hi = TX_PAGE_NUM_HI_PQ_8192E, - .page_num_lo = TX_PAGE_NUM_LO_PQ_8192E, - .page_num_norm = TX_PAGE_NUM_NORM_PQ_8192E, -}; - -static struct usb_device_id dev_table[] = { -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8723au_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1724, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8723au_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8723au_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192eu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8723bu_fops}, -#ifdef CONFIG_RTL8XXXU_UNTESTED -/* Still supported by rtlwifi */ -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8178, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817f, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -/* Tested by Larry Finger */ -{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7811, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -/* Tested by Andrea Merello */ -{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -/* Currently untested 8188 series devices */ -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8170, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8177, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817a, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817b, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817d, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817e, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818a, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x1058, 0x0631, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x094c, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1102, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe033, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8189, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9041, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ba, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1e1e, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x5088, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0052, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x005c, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0eb0, 0x9071, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x103c, 0x1629, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2a, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2e, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffa, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff8, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffb, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffc, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x1201, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -/* Currently untested 8192 series devices */ -{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x0950, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2102, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2103, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x341f, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe035, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ab, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0061, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0070, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0789, 0x016d, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x07aa, 0x0056, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8178, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9021, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0xf001, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2e2e, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0019, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0020, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3307, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3309, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330a, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2b, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x624d, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0100, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0091, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7822, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, -#endif -{ } -}; - -static struct usb_driver rtl8xxxu_driver = { - .name = DRIVER_NAME, - .probe = rtl8xxxu_probe, - .disconnect = rtl8xxxu_disconnect, - .id_table = dev_table, - .no_dynamic_id = 1, - .disable_hub_initiated_lpm = 1, -}; - -static int __init rtl8xxxu_module_init(void) -{ - int res; - - res = usb_register(&rtl8xxxu_driver); - if (res < 0) - pr_err(DRIVER_NAME ": usb_register() failed (%i)\n", res); - - return res; -} - -static void __exit rtl8xxxu_module_exit(void) -{ - usb_deregister(&rtl8xxxu_driver); -} - - -MODULE_DEVICE_TABLE(usb, dev_table); - -module_init(rtl8xxxu_module_init); -module_exit(rtl8xxxu_module_exit); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c new file mode 100644 index 0000000..f2ce8c9 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -0,0 +1,10213 @@ +/* + * RTL8XXXU mac80211 USB driver + * + * Copyright (c) 2014 - 2016 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +#define DRIVER_NAME "rtl8xxxu" + +static int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; +static bool rtl8xxxu_ht40_2g; + +MODULE_AUTHOR("Jes Sorensen "); +MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin"); + +module_param_named(debug, rtl8xxxu_debug, int, 0600); +MODULE_PARM_DESC(debug, "Set debug mask"); +module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600); +MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band"); + +#define USB_VENDOR_ID_REALTEK 0x0bda +/* Minimum IEEE80211_MAX_FRAME_LEN */ +#define RTL_RX_BUFFER_SIZE IEEE80211_MAX_FRAME_LEN +#define RTL8XXXU_RX_URBS 32 +#define RTL8XXXU_RX_URB_PENDING_WATER 8 +#define RTL8XXXU_TX_URBS 64 +#define RTL8XXXU_TX_URB_LOW_WATER 25 +#define RTL8XXXU_TX_URB_HIGH_WATER 32 + +static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rx_urb *rx_urb); + +static struct ieee80211_rate rtl8xxxu_rates[] = { + { .bitrate = 10, .hw_value = DESC_RATE_1M, .flags = 0 }, + { .bitrate = 20, .hw_value = DESC_RATE_2M, .flags = 0 }, + { .bitrate = 55, .hw_value = DESC_RATE_5_5M, .flags = 0 }, + { .bitrate = 110, .hw_value = DESC_RATE_11M, .flags = 0 }, + { .bitrate = 60, .hw_value = DESC_RATE_6M, .flags = 0 }, + { .bitrate = 90, .hw_value = DESC_RATE_9M, .flags = 0 }, + { .bitrate = 120, .hw_value = DESC_RATE_12M, .flags = 0 }, + { .bitrate = 180, .hw_value = DESC_RATE_18M, .flags = 0 }, + { .bitrate = 240, .hw_value = DESC_RATE_24M, .flags = 0 }, + { .bitrate = 360, .hw_value = DESC_RATE_36M, .flags = 0 }, + { .bitrate = 480, .hw_value = DESC_RATE_48M, .flags = 0 }, + { .bitrate = 540, .hw_value = DESC_RATE_54M, .flags = 0 }, +}; + +static struct ieee80211_channel rtl8xxxu_channels_2g[] = { + { .band = NL80211_BAND_2GHZ, .center_freq = 2412, + .hw_value = 1, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2417, + .hw_value = 2, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2422, + .hw_value = 3, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2427, + .hw_value = 4, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2432, + .hw_value = 5, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2437, + .hw_value = 6, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2442, + .hw_value = 7, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2447, + .hw_value = 8, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2452, + .hw_value = 9, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2457, + .hw_value = 10, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2462, + .hw_value = 11, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2467, + .hw_value = 12, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2472, + .hw_value = 13, .max_power = 30 }, + { .band = NL80211_BAND_2GHZ, .center_freq = 2484, + .hw_value = 14, .max_power = 30 } +}; + +static struct ieee80211_supported_band rtl8xxxu_supported_band = { + .channels = rtl8xxxu_channels_2g, + .n_channels = ARRAY_SIZE(rtl8xxxu_channels_2g), + .bitrates = rtl8xxxu_rates, + .n_bitrates = ARRAY_SIZE(rtl8xxxu_rates), +}; + +static struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { + {0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00}, + {0x43a, 0x00}, {0x43b, 0x01}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f}, + {0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72}, + {0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x462, 0x08}, + {0x463, 0x03}, {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, + {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, + {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, + {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, + {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, + {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, + {0x515, 0x10}, {0x516, 0x0a}, {0x517, 0x10}, {0x51a, 0x16}, + {0x524, 0x0f}, {0x525, 0x4f}, {0x546, 0x40}, {0x547, 0x00}, + {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55a, 0x02}, + {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, + {0x652, 0x20}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, + {0x63f, 0x0e}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, + {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, + {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff}, +}; + +static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { + {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, + {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, + {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, + {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, + {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, + {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, + {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, + {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, + {0x516, 0x0a}, {0x525, 0x4f}, + {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, + {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, + {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, + {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, + {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, + {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, + {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, + {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, + {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, + {0xffff, 0xff}, +}; + +static struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = { + {0x011, 0xeb}, {0x012, 0x07}, {0x014, 0x75}, {0x303, 0xa7}, + {0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff}, + {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f}, + {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e}, + {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e}, + {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00}, + {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a}, + {0x525, 0x4f}, {0x540, 0x12}, {0x541, 0x64}, {0x550, 0x10}, + {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, {0x55d, 0xff}, + {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff}, + {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff}, + {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x638, 0x50}, + {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e}, + {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xc8}, + {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, + {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65}, + {0x70b, 0x87}, + {0xffff, 0xff}, +}; + +#ifdef CONFIG_RTL8XXXU_UNTESTED +static struct rtl8xxxu_power_base rtl8188r_power_base = { + .reg_0e00 = 0x06080808, + .reg_0e04 = 0x00040406, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x04060608, + .reg_0e14 = 0x00020204, + .reg_0e18 = 0x04060608, + .reg_0e1c = 0x00020204, + + .reg_0830 = 0x06080808, + .reg_0834 = 0x00040406, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x04060608, + .reg_0848 = 0x00020204, + .reg_084c = 0x04060608, + .reg_0868 = 0x00020204, +}; + +static struct rtl8xxxu_power_base rtl8192c_power_base = { + .reg_0e00 = 0x07090c0c, + .reg_0e04 = 0x01020405, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x0b0c0c0e, + .reg_0e14 = 0x01030506, + .reg_0e18 = 0x0b0c0d0e, + .reg_0e1c = 0x01030509, + + .reg_0830 = 0x07090c0c, + .reg_0834 = 0x01020405, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x0b0c0d0e, + .reg_0848 = 0x01030509, + .reg_084c = 0x0b0c0d0e, + .reg_0868 = 0x01030509, +}; +#endif + +static struct rtl8xxxu_power_base rtl8723a_power_base = { + .reg_0e00 = 0x0a0c0c0c, + .reg_0e04 = 0x02040608, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x0a0c0d0e, + .reg_0e14 = 0x02040608, + .reg_0e18 = 0x0a0c0d0e, + .reg_0e1c = 0x02040608, + + .reg_0830 = 0x0a0c0c0c, + .reg_0834 = 0x02040608, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x0a0c0d0e, + .reg_0848 = 0x02040608, + .reg_084c = 0x0a0c0d0e, + .reg_0868 = 0x02040608, +}; + +static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00390004}, + {0x828, 0x00000000}, {0x82c, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83c, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84c, 0x00000000}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a569a}, {0x85c, 0x001b25a4}, + {0x860, 0x66f60110}, {0x864, 0x061f0130}, + {0x868, 0x00000000}, {0x86c, 0x32323200}, + {0x870, 0x07000760}, {0x874, 0x22004000}, + {0x878, 0x00000808}, {0x87c, 0x00000000}, + {0x880, 0xc0083070}, {0x884, 0x000004d5}, + {0x888, 0x00000000}, {0x88c, 0xccc000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121111}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x11144028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xa78, 0x00000900}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69543420}, {0xc54, 0x43bc0094}, + {0xc58, 0x69543420}, {0xc5c, 0x433c0094}, + {0xc60, 0x00000000}, {0xc64, 0x7112848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x018610db}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, + {0xc80, 0x40000100}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0x20200000}, + {0xc90, 0x00121820}, {0xc94, 0x00000000}, + {0xc98, 0x00121820}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x00000080}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00080740}, {0xd04, 0x00020401}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc43}, + {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00027293}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000000}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a}, + {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a}, + {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a}, + {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, + {0xe68, 0x001b25a4}, {0xe6c, 0x631b25a0}, + {0xe70, 0x631b25a0}, {0xe74, 0x081b25a0}, + {0xe78, 0x081b25a0}, {0xe7c, 0x081b25a0}, + {0xe80, 0x081b25a0}, {0xe84, 0x631b25a0}, + {0xe88, 0x081b25a0}, {0xe8c, 0x631b25a0}, + {0xed0, 0x631b25a0}, {0xed4, 0x631b25a0}, + {0xed8, 0x631b25a0}, {0xedc, 0x001b25a0}, + {0xee0, 0x001b25a0}, {0xeec, 0x6b1b25a0}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00190204}, + {0x828, 0x00000000}, {0x82c, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83c, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84c, 0x00000000}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a11a9}, {0x85c, 0x01000014}, + {0x860, 0x66f60110}, {0x864, 0x061f0649}, + {0x868, 0x00000000}, {0x86c, 0x27272700}, + {0x870, 0x07000760}, {0x874, 0x25004000}, + {0x878, 0x00000808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xccc000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121111}, + {0x910, 0x00000002}, {0x914, 0x00000201}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, + {0xa80, 0x21806490}, {0xb2c, 0x00000000}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, + {0xc58, 0x00013149}, {0xc5c, 0x00250492}, + {0xc60, 0x00000000}, {0xc64, 0x7112848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, + {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0x20200000}, + {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, + {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x000300a0}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00000740}, {0xd04, 0x40020401}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, + {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, + {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, + {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, + {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, + {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, + {0xe70, 0x00c00096}, {0xe74, 0x01000056}, + {0xe78, 0x01000014}, {0xe7c, 0x01000056}, + {0xe80, 0x01000014}, {0xe84, 0x00c00096}, + {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, + {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, + {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, + {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0x820, 0x01000100}, {0x800, 0x83040000}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = { + {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, + {0x800, 0x80040002}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10000330}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00390004}, + {0x828, 0x01000100}, {0x82c, 0x00390004}, + {0x830, 0x27272727}, {0x834, 0x27272727}, + {0x838, 0x27272727}, {0x83c, 0x27272727}, + {0x840, 0x00010000}, {0x844, 0x00010000}, + {0x848, 0x27272727}, {0x84c, 0x27272727}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a569a}, {0x85c, 0x0c1b25a4}, + {0x860, 0x66e60230}, {0x864, 0x061f0130}, + {0x868, 0x27272727}, {0x86c, 0x2b2b2b27}, + {0x870, 0x07000700}, {0x874, 0x22184000}, + {0x878, 0x08080808}, {0x87c, 0x00000000}, + {0x880, 0xc0083070}, {0x884, 0x000004d5}, + {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121313}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x11144028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05633}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652cf}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69543420}, {0xc54, 0x43bc0094}, + {0xc58, 0x69543420}, {0xc5c, 0x433c0094}, + {0xc60, 0x00000000}, {0xc64, 0x5116848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x2186115b}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b99612}, + {0xc80, 0x40000100}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0xa0e40000}, + {0xc90, 0x00121820}, {0xc94, 0x00000000}, + {0xc98, 0x00121820}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x00000080}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00080740}, {0xd04, 0x00020403}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc43}, + {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00027293}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000000}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a}, + {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a}, + {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a}, + {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000010}, + {0xe68, 0x001b25a4}, {0xe6c, 0x63db25a4}, + {0xe70, 0x63db25a4}, {0xe74, 0x0c1b25a4}, + {0xe78, 0x0c1b25a4}, {0xe7c, 0x0c1b25a4}, + {0xe80, 0x0c1b25a4}, {0xe84, 0x63db25a4}, + {0xe88, 0x0c1b25a4}, {0xe8c, 0x63db25a4}, + {0xed0, 0x63db25a4}, {0xed4, 0x63db25a4}, + {0xed8, 0x63db25a4}, {0xedc, 0x001b25a4}, + {0xee0, 0x001b25a4}, {0xeec, 0x6fdb25a4}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = { + {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, + {0x040, 0x000c0004}, {0x800, 0x80040000}, + {0x804, 0x00000001}, {0x808, 0x0000fc00}, + {0x80c, 0x0000000a}, {0x810, 0x10005388}, + {0x814, 0x020c3d10}, {0x818, 0x02200385}, + {0x81c, 0x00000000}, {0x820, 0x01000100}, + {0x824, 0x00390204}, {0x828, 0x00000000}, + {0x82c, 0x00000000}, {0x830, 0x00000000}, + {0x834, 0x00000000}, {0x838, 0x00000000}, + {0x83c, 0x00000000}, {0x840, 0x00010000}, + {0x844, 0x00000000}, {0x848, 0x00000000}, + {0x84c, 0x00000000}, {0x850, 0x00000000}, + {0x854, 0x00000000}, {0x858, 0x569a569a}, + {0x85c, 0x001b25a4}, {0x860, 0x66e60230}, + {0x864, 0x061f0130}, {0x868, 0x00000000}, + {0x86c, 0x20202000}, {0x870, 0x03000300}, + {0x874, 0x22004000}, {0x878, 0x00000808}, + {0x87c, 0x00ffc3f1}, {0x880, 0xc0083070}, + {0x884, 0x000004d5}, {0x888, 0x00000000}, + {0x88c, 0xccc000c0}, {0x890, 0x00000800}, + {0x894, 0xfffffffe}, {0x898, 0x40302010}, + {0x89c, 0x00706050}, {0x900, 0x00000000}, + {0x904, 0x00000023}, {0x908, 0x00000000}, + {0x90c, 0x81121111}, {0xa00, 0x00d047c8}, + {0xa04, 0x80ff000c}, {0xa08, 0x8c838300}, + {0xa0c, 0x2e68120f}, {0xa10, 0x9500bb78}, + {0xa14, 0x11144028}, {0xa18, 0x00881117}, + {0xa1c, 0x89140f00}, {0xa20, 0x15160000}, + {0xa24, 0x070b0f12}, {0xa28, 0x00000104}, + {0xa2c, 0x00d30000}, {0xa70, 0x101fbf00}, + {0xa74, 0x00000007}, {0xc00, 0x48071d40}, + {0xc04, 0x03a05611}, {0xc08, 0x000000e4}, + {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, + {0xc14, 0x40000100}, {0xc18, 0x08800000}, + {0xc1c, 0x40000100}, {0xc20, 0x00000000}, + {0xc24, 0x00000000}, {0xc28, 0x00000000}, + {0xc2c, 0x00000000}, {0xc30, 0x69e9ac44}, + {0xc34, 0x469652cf}, {0xc38, 0x49795994}, + {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, + {0xc44, 0x000100b7}, {0xc48, 0xec020107}, + {0xc4c, 0x007f037f}, {0xc50, 0x6954342e}, + {0xc54, 0x43bc0094}, {0xc58, 0x6954342f}, + {0xc5c, 0x433c0094}, {0xc60, 0x00000000}, + {0xc64, 0x5116848b}, {0xc68, 0x47c00bff}, + {0xc6c, 0x00000036}, {0xc70, 0x2c46000d}, + {0xc74, 0x018610db}, {0xc78, 0x0000001f}, + {0xc7c, 0x00b91612}, {0xc80, 0x24000090}, + {0xc84, 0x20f60000}, {0xc88, 0x24000090}, + {0xc8c, 0x20200000}, {0xc90, 0x00121820}, + {0xc94, 0x00000000}, {0xc98, 0x00121820}, + {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, + {0xca4, 0x00000080}, {0xca8, 0x00000000}, + {0xcac, 0x00000000}, {0xcb0, 0x00000000}, + {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, + {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, + {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, + {0xccc, 0x00000000}, {0xcd0, 0x00000000}, + {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, + {0xcdc, 0x00766932}, {0xce0, 0x00222222}, + {0xce4, 0x00000000}, {0xce8, 0x37644302}, + {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, + {0xd04, 0x00020401}, {0xd08, 0x0000907f}, + {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, + {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, + {0xd2c, 0xcc979975}, {0xd30, 0x00000000}, + {0xd34, 0x80608000}, {0xd38, 0x00000000}, + {0xd3c, 0x00027293}, {0xd40, 0x00000000}, + {0xd44, 0x00000000}, {0xd48, 0x00000000}, + {0xd4c, 0x00000000}, {0xd50, 0x6437140a}, + {0xd54, 0x00000000}, {0xd58, 0x00000000}, + {0xd5c, 0x30032064}, {0xd60, 0x4653de68}, + {0xd64, 0x04518a3c}, {0xd68, 0x00002101}, + {0xd6c, 0x2a201c16}, {0xd70, 0x1812362e}, + {0xd74, 0x322c2220}, {0xd78, 0x000e3c24}, + {0xe00, 0x24242424}, {0xe04, 0x24242424}, + {0xe08, 0x03902024}, {0xe10, 0x24242424}, + {0xe14, 0x24242424}, {0xe18, 0x24242424}, + {0xe1c, 0x24242424}, {0xe28, 0x00000000}, + {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, + {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, + {0xe40, 0x01007c00}, {0xe44, 0x01004800}, + {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, + {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, + {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, + {0xe60, 0x00000008}, {0xe68, 0x001b25a4}, + {0xe6c, 0x631b25a0}, {0xe70, 0x631b25a0}, + {0xe74, 0x081b25a0}, {0xe78, 0x081b25a0}, + {0xe7c, 0x081b25a0}, {0xe80, 0x081b25a0}, + {0xe84, 0x631b25a0}, {0xe88, 0x081b25a0}, + {0xe8c, 0x631b25a0}, {0xed0, 0x631b25a0}, + {0xed4, 0x631b25a0}, {0xed8, 0x631b25a0}, + {0xedc, 0x001b25a0}, {0xee0, 0x001b25a0}, + {0xeec, 0x6b1b25a0}, {0xee8, 0x31555448}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8192eu_phy_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02220385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00390204}, + {0x828, 0x01000100}, {0x82c, 0x00390204}, + {0x830, 0x32323232}, {0x834, 0x30303030}, + {0x838, 0x30303030}, {0x83c, 0x30303030}, + {0x840, 0x00010000}, {0x844, 0x00010000}, + {0x848, 0x28282828}, {0x84c, 0x28282828}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x009a009a}, {0x85c, 0x01000014}, + {0x860, 0x66f60000}, {0x864, 0x061f0000}, + {0x868, 0x30303030}, {0x86c, 0x30303030}, + {0x870, 0x00000000}, {0x874, 0x55004200}, + {0x878, 0x08080808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x900, 0x00000000}, + {0x904, 0x00000023}, {0x908, 0x00000000}, + {0x90c, 0x81121313}, {0x910, 0x806c0001}, + {0x914, 0x00000001}, {0x918, 0x00000000}, + {0x91c, 0x00010000}, {0x924, 0x00000001}, + {0x928, 0x00000000}, {0x92c, 0x00000000}, + {0x930, 0x00000000}, {0x934, 0x00000000}, + {0x938, 0x00000000}, {0x93c, 0x00000000}, + {0x940, 0x00000000}, {0x944, 0x00000000}, + {0x94c, 0x00000008}, {0xa00, 0x00d0c7c8}, + {0xa04, 0x81ff000c}, {0xa08, 0x8c838300}, + {0xa0c, 0x2e68120f}, {0xa10, 0x95009b78}, + {0xa14, 0x1114d028}, {0xa18, 0x00881117}, + {0xa1c, 0x89140f00}, {0xa20, 0x1a1b0000}, + {0xa24, 0x090e1317}, {0xa28, 0x00000204}, + {0xa2c, 0x00d30000}, {0xa70, 0x101fff00}, + {0xa74, 0x00000007}, {0xa78, 0x00000900}, + {0xa7c, 0x225b0606}, {0xa80, 0x218075b1}, + {0xb38, 0x00000000}, {0xc00, 0x48071d40}, + {0xc04, 0x03a05633}, {0xc08, 0x000000e4}, + {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, + {0xc14, 0x40000100}, {0xc18, 0x08800000}, + {0xc1c, 0x40000100}, {0xc20, 0x00000000}, + {0xc24, 0x00000000}, {0xc28, 0x00000000}, + {0xc2c, 0x00000000}, {0xc30, 0x69e9ac47}, + {0xc34, 0x469652af}, {0xc38, 0x49795994}, + {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, + {0xc44, 0x000100b7}, {0xc48, 0xec020107}, + {0xc4c, 0x007f037f}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc50, 0x00340220}, +#else + {0xc50, 0x00340020}, +#endif + {0xc54, 0x0080801f}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc58, 0x00000220}, +#else + {0xc58, 0x00000020}, +#endif + {0xc5c, 0x00248492}, {0xc60, 0x00000000}, + {0xc64, 0x7112848b}, {0xc68, 0x47c00bff}, + {0xc6c, 0x00000036}, {0xc70, 0x00000600}, + {0xc74, 0x02013169}, {0xc78, 0x0000001f}, + {0xc7c, 0x00b91612}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc80, 0x2d4000b5}, +#else + {0xc80, 0x40000100}, +#endif + {0xc84, 0x21f60000}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc88, 0x2d4000b5}, +#else + {0xc88, 0x40000100}, +#endif + {0xc8c, 0xa0e40000}, {0xc90, 0x00121820}, + {0xc94, 0x00000000}, {0xc98, 0x00121820}, + {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, + {0xca4, 0x000300a0}, {0xca8, 0x00000000}, + {0xcac, 0x00000000}, {0xcb0, 0x00000000}, + {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, + {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, + {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, + {0xccc, 0x00000000}, {0xcd0, 0x00000000}, + {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, + {0xcdc, 0x00766932}, {0xce0, 0x00222222}, + {0xce4, 0x00040000}, {0xce8, 0x77644302}, + {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, + {0xd04, 0x00020403}, {0xd08, 0x0000907f}, + {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, + {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, + {0xd1c, 0x0000007f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xd80, 0x01081008}, + {0xd84, 0x00000800}, {0xd88, 0xf0b50000}, + {0xe00, 0x30303030}, {0xe04, 0x30303030}, + {0xe08, 0x03903030}, {0xe10, 0x30303030}, + {0xe14, 0x30303030}, {0xe18, 0x30303030}, + {0xe1c, 0x30303030}, {0xe28, 0x00000000}, + {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, + {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, + {0xe40, 0x01007c00}, {0xe44, 0x01004800}, + {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, + {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, + {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, + {0xe60, 0x00000008}, {0xe68, 0x0fc05656}, + {0xe6c, 0x03c09696}, {0xe70, 0x03c09696}, + {0xe74, 0x0c005656}, {0xe78, 0x0c005656}, + {0xe7c, 0x0c005656}, {0xe80, 0x0c005656}, + {0xe84, 0x03c09696}, {0xe88, 0x0c005656}, + {0xe8c, 0x03c09696}, {0xed0, 0x03c09696}, + {0xed4, 0x03c09696}, {0xed8, 0x03c09696}, + {0xedc, 0x0000d6d6}, {0xee0, 0x0000d6d6}, + {0xeec, 0x0fc01616}, {0xee4, 0xb0000c1c}, + {0xee8, 0x00000001}, {0xf14, 0x00000003}, + {0xf4c, 0x00000000}, {0xf00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = { + {0xc78, 0x7b000001}, {0xc78, 0x7b010001}, + {0xc78, 0x7b020001}, {0xc78, 0x7b030001}, + {0xc78, 0x7b040001}, {0xc78, 0x7b050001}, + {0xc78, 0x7a060001}, {0xc78, 0x79070001}, + {0xc78, 0x78080001}, {0xc78, 0x77090001}, + {0xc78, 0x760a0001}, {0xc78, 0x750b0001}, + {0xc78, 0x740c0001}, {0xc78, 0x730d0001}, + {0xc78, 0x720e0001}, {0xc78, 0x710f0001}, + {0xc78, 0x70100001}, {0xc78, 0x6f110001}, + {0xc78, 0x6e120001}, {0xc78, 0x6d130001}, + {0xc78, 0x6c140001}, {0xc78, 0x6b150001}, + {0xc78, 0x6a160001}, {0xc78, 0x69170001}, + {0xc78, 0x68180001}, {0xc78, 0x67190001}, + {0xc78, 0x661a0001}, {0xc78, 0x651b0001}, + {0xc78, 0x641c0001}, {0xc78, 0x631d0001}, + {0xc78, 0x621e0001}, {0xc78, 0x611f0001}, + {0xc78, 0x60200001}, {0xc78, 0x49210001}, + {0xc78, 0x48220001}, {0xc78, 0x47230001}, + {0xc78, 0x46240001}, {0xc78, 0x45250001}, + {0xc78, 0x44260001}, {0xc78, 0x43270001}, + {0xc78, 0x42280001}, {0xc78, 0x41290001}, + {0xc78, 0x402a0001}, {0xc78, 0x262b0001}, + {0xc78, 0x252c0001}, {0xc78, 0x242d0001}, + {0xc78, 0x232e0001}, {0xc78, 0x222f0001}, + {0xc78, 0x21300001}, {0xc78, 0x20310001}, + {0xc78, 0x06320001}, {0xc78, 0x05330001}, + {0xc78, 0x04340001}, {0xc78, 0x03350001}, + {0xc78, 0x02360001}, {0xc78, 0x01370001}, + {0xc78, 0x00380001}, {0xc78, 0x00390001}, + {0xc78, 0x003a0001}, {0xc78, 0x003b0001}, + {0xc78, 0x003c0001}, {0xc78, 0x003d0001}, + {0xc78, 0x003e0001}, {0xc78, 0x003f0001}, + {0xc78, 0x7b400001}, {0xc78, 0x7b410001}, + {0xc78, 0x7b420001}, {0xc78, 0x7b430001}, + {0xc78, 0x7b440001}, {0xc78, 0x7b450001}, + {0xc78, 0x7a460001}, {0xc78, 0x79470001}, + {0xc78, 0x78480001}, {0xc78, 0x77490001}, + {0xc78, 0x764a0001}, {0xc78, 0x754b0001}, + {0xc78, 0x744c0001}, {0xc78, 0x734d0001}, + {0xc78, 0x724e0001}, {0xc78, 0x714f0001}, + {0xc78, 0x70500001}, {0xc78, 0x6f510001}, + {0xc78, 0x6e520001}, {0xc78, 0x6d530001}, + {0xc78, 0x6c540001}, {0xc78, 0x6b550001}, + {0xc78, 0x6a560001}, {0xc78, 0x69570001}, + {0xc78, 0x68580001}, {0xc78, 0x67590001}, + {0xc78, 0x665a0001}, {0xc78, 0x655b0001}, + {0xc78, 0x645c0001}, {0xc78, 0x635d0001}, + {0xc78, 0x625e0001}, {0xc78, 0x615f0001}, + {0xc78, 0x60600001}, {0xc78, 0x49610001}, + {0xc78, 0x48620001}, {0xc78, 0x47630001}, + {0xc78, 0x46640001}, {0xc78, 0x45650001}, + {0xc78, 0x44660001}, {0xc78, 0x43670001}, + {0xc78, 0x42680001}, {0xc78, 0x41690001}, + {0xc78, 0x406a0001}, {0xc78, 0x266b0001}, + {0xc78, 0x256c0001}, {0xc78, 0x246d0001}, + {0xc78, 0x236e0001}, {0xc78, 0x226f0001}, + {0xc78, 0x21700001}, {0xc78, 0x20710001}, + {0xc78, 0x06720001}, {0xc78, 0x05730001}, + {0xc78, 0x04740001}, {0xc78, 0x03750001}, + {0xc78, 0x02760001}, {0xc78, 0x01770001}, + {0xc78, 0x00780001}, {0xc78, 0x00790001}, + {0xc78, 0x007a0001}, {0xc78, 0x007b0001}, + {0xc78, 0x007c0001}, {0xc78, 0x007d0001}, + {0xc78, 0x007e0001}, {0xc78, 0x007f0001}, + {0xc78, 0x3800001e}, {0xc78, 0x3801001e}, + {0xc78, 0x3802001e}, {0xc78, 0x3803001e}, + {0xc78, 0x3804001e}, {0xc78, 0x3805001e}, + {0xc78, 0x3806001e}, {0xc78, 0x3807001e}, + {0xc78, 0x3808001e}, {0xc78, 0x3c09001e}, + {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e}, + {0xc78, 0x440c001e}, {0xc78, 0x480d001e}, + {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e}, + {0xc78, 0x5210001e}, {0xc78, 0x5611001e}, + {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e}, + {0xc78, 0x6014001e}, {0xc78, 0x6015001e}, + {0xc78, 0x6016001e}, {0xc78, 0x6217001e}, + {0xc78, 0x6218001e}, {0xc78, 0x6219001e}, + {0xc78, 0x621a001e}, {0xc78, 0x621b001e}, + {0xc78, 0x621c001e}, {0xc78, 0x621d001e}, + {0xc78, 0x621e001e}, {0xc78, 0x621f001e}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { + {0xc78, 0x7b000001}, {0xc78, 0x7b010001}, + {0xc78, 0x7b020001}, {0xc78, 0x7b030001}, + {0xc78, 0x7b040001}, {0xc78, 0x7b050001}, + {0xc78, 0x7b060001}, {0xc78, 0x7b070001}, + {0xc78, 0x7b080001}, {0xc78, 0x7a090001}, + {0xc78, 0x790a0001}, {0xc78, 0x780b0001}, + {0xc78, 0x770c0001}, {0xc78, 0x760d0001}, + {0xc78, 0x750e0001}, {0xc78, 0x740f0001}, + {0xc78, 0x73100001}, {0xc78, 0x72110001}, + {0xc78, 0x71120001}, {0xc78, 0x70130001}, + {0xc78, 0x6f140001}, {0xc78, 0x6e150001}, + {0xc78, 0x6d160001}, {0xc78, 0x6c170001}, + {0xc78, 0x6b180001}, {0xc78, 0x6a190001}, + {0xc78, 0x691a0001}, {0xc78, 0x681b0001}, + {0xc78, 0x671c0001}, {0xc78, 0x661d0001}, + {0xc78, 0x651e0001}, {0xc78, 0x641f0001}, + {0xc78, 0x63200001}, {0xc78, 0x62210001}, + {0xc78, 0x61220001}, {0xc78, 0x60230001}, + {0xc78, 0x46240001}, {0xc78, 0x45250001}, + {0xc78, 0x44260001}, {0xc78, 0x43270001}, + {0xc78, 0x42280001}, {0xc78, 0x41290001}, + {0xc78, 0x402a0001}, {0xc78, 0x262b0001}, + {0xc78, 0x252c0001}, {0xc78, 0x242d0001}, + {0xc78, 0x232e0001}, {0xc78, 0x222f0001}, + {0xc78, 0x21300001}, {0xc78, 0x20310001}, + {0xc78, 0x06320001}, {0xc78, 0x05330001}, + {0xc78, 0x04340001}, {0xc78, 0x03350001}, + {0xc78, 0x02360001}, {0xc78, 0x01370001}, + {0xc78, 0x00380001}, {0xc78, 0x00390001}, + {0xc78, 0x003a0001}, {0xc78, 0x003b0001}, + {0xc78, 0x003c0001}, {0xc78, 0x003d0001}, + {0xc78, 0x003e0001}, {0xc78, 0x003f0001}, + {0xc78, 0x7b400001}, {0xc78, 0x7b410001}, + {0xc78, 0x7b420001}, {0xc78, 0x7b430001}, + {0xc78, 0x7b440001}, {0xc78, 0x7b450001}, + {0xc78, 0x7b460001}, {0xc78, 0x7b470001}, + {0xc78, 0x7b480001}, {0xc78, 0x7a490001}, + {0xc78, 0x794a0001}, {0xc78, 0x784b0001}, + {0xc78, 0x774c0001}, {0xc78, 0x764d0001}, + {0xc78, 0x754e0001}, {0xc78, 0x744f0001}, + {0xc78, 0x73500001}, {0xc78, 0x72510001}, + {0xc78, 0x71520001}, {0xc78, 0x70530001}, + {0xc78, 0x6f540001}, {0xc78, 0x6e550001}, + {0xc78, 0x6d560001}, {0xc78, 0x6c570001}, + {0xc78, 0x6b580001}, {0xc78, 0x6a590001}, + {0xc78, 0x695a0001}, {0xc78, 0x685b0001}, + {0xc78, 0x675c0001}, {0xc78, 0x665d0001}, + {0xc78, 0x655e0001}, {0xc78, 0x645f0001}, + {0xc78, 0x63600001}, {0xc78, 0x62610001}, + {0xc78, 0x61620001}, {0xc78, 0x60630001}, + {0xc78, 0x46640001}, {0xc78, 0x45650001}, + {0xc78, 0x44660001}, {0xc78, 0x43670001}, + {0xc78, 0x42680001}, {0xc78, 0x41690001}, + {0xc78, 0x406a0001}, {0xc78, 0x266b0001}, + {0xc78, 0x256c0001}, {0xc78, 0x246d0001}, + {0xc78, 0x236e0001}, {0xc78, 0x226f0001}, + {0xc78, 0x21700001}, {0xc78, 0x20710001}, + {0xc78, 0x06720001}, {0xc78, 0x05730001}, + {0xc78, 0x04740001}, {0xc78, 0x03750001}, + {0xc78, 0x02760001}, {0xc78, 0x01770001}, + {0xc78, 0x00780001}, {0xc78, 0x00790001}, + {0xc78, 0x007a0001}, {0xc78, 0x007b0001}, + {0xc78, 0x007c0001}, {0xc78, 0x007d0001}, + {0xc78, 0x007e0001}, {0xc78, 0x007f0001}, + {0xc78, 0x3800001e}, {0xc78, 0x3801001e}, + {0xc78, 0x3802001e}, {0xc78, 0x3803001e}, + {0xc78, 0x3804001e}, {0xc78, 0x3805001e}, + {0xc78, 0x3806001e}, {0xc78, 0x3807001e}, + {0xc78, 0x3808001e}, {0xc78, 0x3c09001e}, + {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e}, + {0xc78, 0x440c001e}, {0xc78, 0x480d001e}, + {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e}, + {0xc78, 0x5210001e}, {0xc78, 0x5611001e}, + {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e}, + {0xc78, 0x6014001e}, {0xc78, 0x6015001e}, + {0xc78, 0x6016001e}, {0xc78, 0x6217001e}, + {0xc78, 0x6218001e}, {0xc78, 0x6219001e}, + {0xc78, 0x621a001e}, {0xc78, 0x621b001e}, + {0xc78, 0x621c001e}, {0xc78, 0x621d001e}, + {0xc78, 0x621e001e}, {0xc78, 0x621f001e}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { + {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, + {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, + {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, + {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, + {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, + {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, + {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, + {0xc78, 0xed100001}, {0xc78, 0xec110001}, + {0xc78, 0xeb120001}, {0xc78, 0xea130001}, + {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, + {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, + {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, + {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, + {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, + {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, + {0xc78, 0x65200001}, {0xc78, 0x64210001}, + {0xc78, 0x63220001}, {0xc78, 0x4a230001}, + {0xc78, 0x49240001}, {0xc78, 0x48250001}, + {0xc78, 0x47260001}, {0xc78, 0x46270001}, + {0xc78, 0x45280001}, {0xc78, 0x44290001}, + {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, + {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, + {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, + {0xc78, 0x0a300001}, {0xc78, 0x09310001}, + {0xc78, 0x08320001}, {0xc78, 0x07330001}, + {0xc78, 0x06340001}, {0xc78, 0x05350001}, + {0xc78, 0x04360001}, {0xc78, 0x03370001}, + {0xc78, 0x02380001}, {0xc78, 0x01390001}, + {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, + {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, + {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, + {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, + {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, + {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, + {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, + {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, + {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, + {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, + {0xc78, 0xec500001}, {0xc78, 0xeb510001}, + {0xc78, 0xea520001}, {0xc78, 0xe9530001}, + {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, + {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, + {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, + {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, + {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, + {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, + {0xc78, 0x65600001}, {0xc78, 0x64610001}, + {0xc78, 0x63620001}, {0xc78, 0x62630001}, + {0xc78, 0x61640001}, {0xc78, 0x48650001}, + {0xc78, 0x47660001}, {0xc78, 0x46670001}, + {0xc78, 0x45680001}, {0xc78, 0x44690001}, + {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, + {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, + {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, + {0xc78, 0x24700001}, {0xc78, 0x09710001}, + {0xc78, 0x08720001}, {0xc78, 0x07730001}, + {0xc78, 0x06740001}, {0xc78, 0x05750001}, + {0xc78, 0x04760001}, {0xc78, 0x03770001}, + {0xc78, 0x02780001}, {0xc78, 0x01790001}, + {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, + {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, + {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, + {0xc50, 0x69553422}, + {0xc50, 0x69553420}, + {0x824, 0x00390204}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_std_table[] = { + {0xc78, 0xfb000001}, {0xc78, 0xfb010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfb030001}, + {0xc78, 0xfb040001}, {0xc78, 0xfb050001}, + {0xc78, 0xfa060001}, {0xc78, 0xf9070001}, + {0xc78, 0xf8080001}, {0xc78, 0xf7090001}, + {0xc78, 0xf60a0001}, {0xc78, 0xf50b0001}, + {0xc78, 0xf40c0001}, {0xc78, 0xf30d0001}, + {0xc78, 0xf20e0001}, {0xc78, 0xf10f0001}, + {0xc78, 0xf0100001}, {0xc78, 0xef110001}, + {0xc78, 0xee120001}, {0xc78, 0xed130001}, + {0xc78, 0xec140001}, {0xc78, 0xeb150001}, + {0xc78, 0xea160001}, {0xc78, 0xe9170001}, + {0xc78, 0xe8180001}, {0xc78, 0xe7190001}, + {0xc78, 0xc81a0001}, {0xc78, 0xc71b0001}, + {0xc78, 0xc61c0001}, {0xc78, 0x071d0001}, + {0xc78, 0x061e0001}, {0xc78, 0x051f0001}, + {0xc78, 0x04200001}, {0xc78, 0x03210001}, + {0xc78, 0xaa220001}, {0xc78, 0xa9230001}, + {0xc78, 0xa8240001}, {0xc78, 0xa7250001}, + {0xc78, 0xa6260001}, {0xc78, 0x85270001}, + {0xc78, 0x84280001}, {0xc78, 0x83290001}, + {0xc78, 0x252a0001}, {0xc78, 0x242b0001}, + {0xc78, 0x232c0001}, {0xc78, 0x222d0001}, + {0xc78, 0x672e0001}, {0xc78, 0x662f0001}, + {0xc78, 0x65300001}, {0xc78, 0x64310001}, + {0xc78, 0x63320001}, {0xc78, 0x62330001}, + {0xc78, 0x61340001}, {0xc78, 0x45350001}, + {0xc78, 0x44360001}, {0xc78, 0x43370001}, + {0xc78, 0x42380001}, {0xc78, 0x41390001}, + {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, + {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, + {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, + {0xc78, 0xfb400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfb420001}, {0xc78, 0xfb430001}, + {0xc78, 0xfb440001}, {0xc78, 0xfb450001}, + {0xc78, 0xfa460001}, {0xc78, 0xf9470001}, + {0xc78, 0xf8480001}, {0xc78, 0xf7490001}, + {0xc78, 0xf64a0001}, {0xc78, 0xf54b0001}, + {0xc78, 0xf44c0001}, {0xc78, 0xf34d0001}, + {0xc78, 0xf24e0001}, {0xc78, 0xf14f0001}, + {0xc78, 0xf0500001}, {0xc78, 0xef510001}, + {0xc78, 0xee520001}, {0xc78, 0xed530001}, + {0xc78, 0xec540001}, {0xc78, 0xeb550001}, + {0xc78, 0xea560001}, {0xc78, 0xe9570001}, + {0xc78, 0xe8580001}, {0xc78, 0xe7590001}, + {0xc78, 0xe65a0001}, {0xc78, 0xe55b0001}, + {0xc78, 0xe45c0001}, {0xc78, 0xe35d0001}, + {0xc78, 0xe25e0001}, {0xc78, 0xe15f0001}, + {0xc78, 0x8a600001}, {0xc78, 0x89610001}, + {0xc78, 0x88620001}, {0xc78, 0x87630001}, + {0xc78, 0x86640001}, {0xc78, 0x85650001}, + {0xc78, 0x84660001}, {0xc78, 0x83670001}, + {0xc78, 0x82680001}, {0xc78, 0x6b690001}, + {0xc78, 0x6a6a0001}, {0xc78, 0x696b0001}, + {0xc78, 0x686c0001}, {0xc78, 0x676d0001}, + {0xc78, 0x666e0001}, {0xc78, 0x656f0001}, + {0xc78, 0x64700001}, {0xc78, 0x63710001}, + {0xc78, 0x62720001}, {0xc78, 0x61730001}, + {0xc78, 0x49740001}, {0xc78, 0x48750001}, + {0xc78, 0x47760001}, {0xc78, 0x46770001}, + {0xc78, 0x45780001}, {0xc78, 0x44790001}, + {0xc78, 0x437a0001}, {0xc78, 0x427b0001}, + {0xc78, 0x417c0001}, {0xc78, 0x407d0001}, + {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, + {0xc50, 0x00040022}, {0xc50, 0x00040020}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_highpa_table[] = { + {0xc78, 0xfa000001}, {0xc78, 0xf9010001}, + {0xc78, 0xf8020001}, {0xc78, 0xf7030001}, + {0xc78, 0xf6040001}, {0xc78, 0xf5050001}, + {0xc78, 0xf4060001}, {0xc78, 0xf3070001}, + {0xc78, 0xf2080001}, {0xc78, 0xf1090001}, + {0xc78, 0xf00a0001}, {0xc78, 0xef0b0001}, + {0xc78, 0xee0c0001}, {0xc78, 0xed0d0001}, + {0xc78, 0xec0e0001}, {0xc78, 0xeb0f0001}, + {0xc78, 0xea100001}, {0xc78, 0xe9110001}, + {0xc78, 0xe8120001}, {0xc78, 0xe7130001}, + {0xc78, 0xe6140001}, {0xc78, 0xe5150001}, + {0xc78, 0xe4160001}, {0xc78, 0xe3170001}, + {0xc78, 0xe2180001}, {0xc78, 0xe1190001}, + {0xc78, 0x8a1a0001}, {0xc78, 0x891b0001}, + {0xc78, 0x881c0001}, {0xc78, 0x871d0001}, + {0xc78, 0x861e0001}, {0xc78, 0x851f0001}, + {0xc78, 0x84200001}, {0xc78, 0x83210001}, + {0xc78, 0x82220001}, {0xc78, 0x6a230001}, + {0xc78, 0x69240001}, {0xc78, 0x68250001}, + {0xc78, 0x67260001}, {0xc78, 0x66270001}, + {0xc78, 0x65280001}, {0xc78, 0x64290001}, + {0xc78, 0x632a0001}, {0xc78, 0x622b0001}, + {0xc78, 0x612c0001}, {0xc78, 0x602d0001}, + {0xc78, 0x472e0001}, {0xc78, 0x462f0001}, + {0xc78, 0x45300001}, {0xc78, 0x44310001}, + {0xc78, 0x43320001}, {0xc78, 0x42330001}, + {0xc78, 0x41340001}, {0xc78, 0x40350001}, + {0xc78, 0x40360001}, {0xc78, 0x40370001}, + {0xc78, 0x40380001}, {0xc78, 0x40390001}, + {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, + {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, + {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, + {0xc78, 0xfa400001}, {0xc78, 0xf9410001}, + {0xc78, 0xf8420001}, {0xc78, 0xf7430001}, + {0xc78, 0xf6440001}, {0xc78, 0xf5450001}, + {0xc78, 0xf4460001}, {0xc78, 0xf3470001}, + {0xc78, 0xf2480001}, {0xc78, 0xf1490001}, + {0xc78, 0xf04a0001}, {0xc78, 0xef4b0001}, + {0xc78, 0xee4c0001}, {0xc78, 0xed4d0001}, + {0xc78, 0xec4e0001}, {0xc78, 0xeb4f0001}, + {0xc78, 0xea500001}, {0xc78, 0xe9510001}, + {0xc78, 0xe8520001}, {0xc78, 0xe7530001}, + {0xc78, 0xe6540001}, {0xc78, 0xe5550001}, + {0xc78, 0xe4560001}, {0xc78, 0xe3570001}, + {0xc78, 0xe2580001}, {0xc78, 0xe1590001}, + {0xc78, 0x8a5a0001}, {0xc78, 0x895b0001}, + {0xc78, 0x885c0001}, {0xc78, 0x875d0001}, + {0xc78, 0x865e0001}, {0xc78, 0x855f0001}, + {0xc78, 0x84600001}, {0xc78, 0x83610001}, + {0xc78, 0x82620001}, {0xc78, 0x6a630001}, + {0xc78, 0x69640001}, {0xc78, 0x68650001}, + {0xc78, 0x67660001}, {0xc78, 0x66670001}, + {0xc78, 0x65680001}, {0xc78, 0x64690001}, + {0xc78, 0x636a0001}, {0xc78, 0x626b0001}, + {0xc78, 0x616c0001}, {0xc78, 0x606d0001}, + {0xc78, 0x476e0001}, {0xc78, 0x466f0001}, + {0xc78, 0x45700001}, {0xc78, 0x44710001}, + {0xc78, 0x43720001}, {0xc78, 0x42730001}, + {0xc78, 0x41740001}, {0xc78, 0x40750001}, + {0xc78, 0x40760001}, {0xc78, 0x40770001}, + {0xc78, 0x40780001}, {0xc78, 0x40790001}, + {0xc78, 0x407a0001}, {0xc78, 0x407b0001}, + {0xc78, 0x407c0001}, {0xc78, 0x407d0001}, + {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, + {0xc50, 0x00040222}, {0xc50, 0x00040220}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00039c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001a3f1}, {0x0b, 0x00014787}, + {0x0c, 0x000896fe}, {0x0d, 0x0000e02c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00030355}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0000024f}, + {0x1f, 0x00000000}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x00057730}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f474}, + {0x15, 0x0004f477}, {0x15, 0x0008f455}, + {0x15, 0x000cf455}, {0x16, 0x00000339}, + {0x16, 0x00040339}, {0x16, 0x00080339}, + {0x16, 0x000c0366}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00000003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00000247}, {0x1f, 0x00000000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { + {0x00, 0x00010000}, {0xb0, 0x000dffe0}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb1, 0x00000018}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb2, 0x00084c00}, + {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, + {0xb7, 0x00000010}, {0xb8, 0x0000907f}, + {0x5c, 0x00000002}, {0x7c, 0x00000002}, + {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, + {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, + {0x1e, 0x00000000}, {0xdf, 0x00000780}, + {0x50, 0x00067435}, + /* + * The 8723bu vendor driver indicates that bit 8 should be set in + * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However + * they never actually check the package type - and just default + * to not setting it. + */ + {0x51, 0x0006b04e}, + {0x52, 0x000007d2}, {0x53, 0x00000000}, + {0x54, 0x00050400}, {0x55, 0x0004026e}, + {0xdd, 0x0000004c}, {0x70, 0x00067435}, + /* + * 0x71 has same package type condition as for register 0x51 + */ + {0x71, 0x0006b04e}, + {0x72, 0x000007d2}, {0x73, 0x00000000}, + {0x74, 0x00050400}, {0x75, 0x0004026e}, + {0xef, 0x00000100}, {0x34, 0x0000add7}, + {0x35, 0x00005c00}, {0x34, 0x00009dd4}, + {0x35, 0x00005000}, {0x34, 0x00008dd1}, + {0x35, 0x00004400}, {0x34, 0x00007dce}, + {0x35, 0x00003800}, {0x34, 0x00006cd1}, + {0x35, 0x00004400}, {0x34, 0x00005cce}, + {0x35, 0x00003800}, {0x34, 0x000048ce}, + {0x35, 0x00004400}, {0x34, 0x000034ce}, + {0x35, 0x00003800}, {0x34, 0x00002451}, + {0x35, 0x00004400}, {0x34, 0x0000144e}, + {0x35, 0x00003800}, {0x34, 0x00000051}, + {0x35, 0x00004400}, {0xef, 0x00000000}, + {0xef, 0x00000100}, {0xed, 0x00000010}, + {0x44, 0x0000add7}, {0x44, 0x00009dd4}, + {0x44, 0x00008dd1}, {0x44, 0x00007dce}, + {0x44, 0x00006cc1}, {0x44, 0x00005cce}, + {0x44, 0x000044d1}, {0x44, 0x000034ce}, + {0x44, 0x00002451}, {0x44, 0x0000144e}, + {0x44, 0x00000051}, {0xef, 0x00000000}, + {0xed, 0x00000000}, {0x7f, 0x00020080}, + {0xef, 0x00002000}, {0x3b, 0x000380ef}, + {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, + {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, + {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, + {0x3b, 0x00000900}, {0xef, 0x00000000}, + {0xed, 0x00000001}, {0x40, 0x000380ef}, + {0x40, 0x000302fe}, {0x40, 0x00028ce6}, + {0x40, 0x000200bc}, {0x40, 0x000188a5}, + {0x40, 0x00010fbc}, {0x40, 0x00008f71}, + {0x40, 0x00000900}, {0xed, 0x00000000}, + {0x82, 0x00080000}, {0x83, 0x00008000}, + {0x84, 0x00048d80}, {0x85, 0x00068000}, + {0xa2, 0x00080000}, {0xa3, 0x00008000}, + {0xa4, 0x00048d80}, {0xa5, 0x00068000}, + {0xed, 0x00000002}, {0xef, 0x00000002}, + {0x56, 0x00000032}, {0x76, 0x00000032}, + {0x01, 0x00000780}, + {0xff, 0xffffffff} +}; + +#ifdef CONFIG_RTL8XXXU_UNTESTED +static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00010255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f424}, + {0x15, 0x0004f424}, {0x15, 0x0008f424}, + {0x15, 0x000cf424}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287af}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x00014297}, + {0x13, 0x00010295}, {0x13, 0x0000c298}, + {0x13, 0x0000819c}, {0x13, 0x000040a8}, + {0x13, 0x0000001c}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f424}, + {0x15, 0x0004f424}, {0x15, 0x0008f424}, + {0x15, 0x000cf424}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00010255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f405}, + {0x15, 0x0004f405}, {0x15, 0x0008f405}, + {0x15, 0x000cf405}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb0}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e529}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00000255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x0000083c}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000977c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x000d8000}, {0x12, 0x00090000}, + {0x12, 0x00051000}, {0x12, 0x00012000}, + {0x13, 0x00028fb4}, {0x13, 0x00024fa8}, + {0x13, 0x000207a4}, {0x13, 0x0001c3b0}, + {0x13, 0x000183a4}, {0x13, 0x00014398}, + {0x13, 0x000101a4}, {0x13, 0x0000c198}, + {0x13, 0x000080a4}, {0x13, 0x00004098}, + {0x13, 0x00000000}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f405}, + {0x15, 0x0004f405}, {0x15, 0x0008f405}, + {0x15, 0x000cf405}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; +#endif + +static struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = { + {0x7f, 0x00000082}, {0x81, 0x0003fc00}, + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1b, 0x00000064}, {0x1e, 0x00080009}, + {0x1f, 0x00000880}, {0x2f, 0x0001a060}, + {0x3f, 0x00000000}, {0x42, 0x000060c0}, + {0x57, 0x000d0000}, {0x58, 0x000be180}, + {0x67, 0x00001552}, {0x83, 0x00000000}, + {0xb0, 0x000ff9f1}, {0xb1, 0x00055418}, + {0xb2, 0x0008cc00}, {0xb4, 0x00043083}, + {0xb5, 0x00008166}, {0xb6, 0x0000803e}, + {0xb7, 0x0001c69f}, {0xb8, 0x0000407f}, + {0xb9, 0x00080001}, {0xba, 0x00040001}, + {0xbb, 0x00000400}, {0xbf, 0x000c0000}, + {0xc2, 0x00002400}, {0xc3, 0x00000009}, + {0xc4, 0x00040c91}, {0xc5, 0x00099999}, + {0xc6, 0x000000a3}, {0xc7, 0x00088820}, + {0xc8, 0x00076c06}, {0xc9, 0x00000000}, + {0xca, 0x00080000}, {0xdf, 0x00000180}, + {0xef, 0x000001a0}, {0x51, 0x00069545}, + {0x52, 0x0007e45e}, {0x53, 0x00000071}, + {0x56, 0x00051ff3}, {0x35, 0x000000a8}, + {0x35, 0x000001e2}, {0x35, 0x000002a8}, + {0x36, 0x00001c24}, {0x36, 0x00009c24}, + {0x36, 0x00011c24}, {0x36, 0x00019c24}, + {0x18, 0x00000c07}, {0x5a, 0x00048000}, + {0x19, 0x000739d0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x34, 0x0000a093}, {0x34, 0x0000908f}, + {0x34, 0x0000808c}, {0x34, 0x0000704d}, + {0x34, 0x0000604a}, {0x34, 0x00005047}, + {0x34, 0x0000400a}, {0x34, 0x00003007}, + {0x34, 0x00002004}, {0x34, 0x00001001}, + {0x34, 0x00000000}, +#else + /* Regular */ + {0x34, 0x0000add7}, {0x34, 0x00009dd4}, + {0x34, 0x00008dd1}, {0x34, 0x00007dce}, + {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, + {0x34, 0x00004dc5}, {0x34, 0x000034cc}, + {0x34, 0x0000244f}, {0x34, 0x0000144c}, + {0x34, 0x00000014}, +#endif + {0x00, 0x00030159}, + {0x84, 0x00068180}, + {0x86, 0x0000014e}, + {0x87, 0x00048e00}, + {0x8e, 0x00065540}, + {0x8f, 0x00088000}, + {0xef, 0x000020a0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000f07b0}, +#else + {0x3b, 0x000f02b0}, +#endif + {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, + {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, + {0x3b, 0x000a0080}, {0x3b, 0x00090080}, + {0x3b, 0x0008f780}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000787b0}, +#else + {0x3b, 0x00078730}, +#endif + {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, + {0x3b, 0x00040620}, {0x3b, 0x00037090}, + {0x3b, 0x00020080}, {0x3b, 0x0001f060}, + {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, + {0xfe, 0x00000000}, {0x18, 0x0000fc07}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00000001}, {0x1f, 0x00080000}, + {0x00, 0x00033e70}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192eu_radiob_init_table[] = { + {0x7f, 0x00000082}, {0x81, 0x0003fc00}, + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1b, 0x00000064}, {0x1e, 0x00080009}, + {0x1f, 0x00000880}, {0x2f, 0x0001a060}, + {0x3f, 0x00000000}, {0x42, 0x000060c0}, + {0x57, 0x000d0000}, {0x58, 0x000be180}, + {0x67, 0x00001552}, {0x7f, 0x00000082}, + {0x81, 0x0003f000}, {0x83, 0x00000000}, + {0xdf, 0x00000180}, {0xef, 0x000001a0}, + {0x51, 0x00069545}, {0x52, 0x0007e42e}, + {0x53, 0x00000071}, {0x56, 0x00051ff3}, + {0x35, 0x000000a8}, {0x35, 0x000001e0}, + {0x35, 0x000002a8}, {0x36, 0x00001ca8}, + {0x36, 0x00009c24}, {0x36, 0x00011c24}, + {0x36, 0x00019c24}, {0x18, 0x00000c07}, + {0x5a, 0x00048000}, {0x19, 0x000739d0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x34, 0x0000a093}, {0x34, 0x0000908f}, + {0x34, 0x0000808c}, {0x34, 0x0000704d}, + {0x34, 0x0000604a}, {0x34, 0x00005047}, + {0x34, 0x0000400a}, {0x34, 0x00003007}, + {0x34, 0x00002004}, {0x34, 0x00001001}, + {0x34, 0x00000000}, +#else + {0x34, 0x0000add7}, {0x34, 0x00009dd4}, + {0x34, 0x00008dd1}, {0x34, 0x00007dce}, + {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, + {0x34, 0x00004dc5}, {0x34, 0x000034cc}, + {0x34, 0x0000244f}, {0x34, 0x0000144c}, + {0x34, 0x00000014}, +#endif + {0x00, 0x00030159}, {0x84, 0x00068180}, + {0x86, 0x000000ce}, {0x87, 0x00048a00}, + {0x8e, 0x00065540}, {0x8f, 0x00088000}, + {0xef, 0x000020a0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000f07b0}, +#else + {0x3b, 0x000f02b0}, +#endif + + {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, + {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, + {0x3b, 0x000a0080}, {0x3b, 0x00090080}, + {0x3b, 0x0008f780}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000787b0}, +#else + {0x3b, 0x00078730}, +#endif + {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, + {0x3b, 0x00040620}, {0x3b, 0x00037090}, + {0x3b, 0x00020080}, {0x3b, 0x0001f060}, + {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, + {0x00, 0x00010159}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1e, 0x00000001}, + {0x1f, 0x00080000}, {0x00, 0x00033e70}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = { + { /* RF_A */ + .hssiparm1 = REG_FPGA0_XA_HSSI_PARM1, + .hssiparm2 = REG_FPGA0_XA_HSSI_PARM2, + .lssiparm = REG_FPGA0_XA_LSSI_PARM, + .hspiread = REG_HSPI_XA_READBACK, + .lssiread = REG_FPGA0_XA_LSSI_READBACK, + .rf_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL, + }, + { /* RF_B */ + .hssiparm1 = REG_FPGA0_XB_HSSI_PARM1, + .hssiparm2 = REG_FPGA0_XB_HSSI_PARM2, + .lssiparm = REG_FPGA0_XB_LSSI_PARM, + .hspiread = REG_HSPI_XB_READBACK, + .lssiread = REG_FPGA0_XB_LSSI_READBACK, + .rf_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL, + }, +}; + +static const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = { + REG_OFDM0_XA_RX_IQ_IMBALANCE, + REG_OFDM0_XB_RX_IQ_IMBALANCE, + REG_OFDM0_ENERGY_CCA_THRES, + REG_OFDM0_AGCR_SSI_TABLE, + REG_OFDM0_XA_TX_IQ_IMBALANCE, + REG_OFDM0_XB_TX_IQ_IMBALANCE, + REG_OFDM0_XC_TX_AFE, + REG_OFDM0_XD_TX_AFE, + REG_OFDM0_RX_IQ_EXT_ANTA +}; + +static u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr) +{ + struct usb_device *udev = priv->udev; + int len; + u8 data; + + mutex_lock(&priv->usb_buf_mutex); + len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_READ, + addr, 0, &priv->usb_buf.val8, sizeof(u8), + RTW_USB_CONTROL_MSG_TIMEOUT); + data = priv->usb_buf.val8; + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) + dev_info(&udev->dev, "%s(%04x) = 0x%02x, len %i\n", + __func__, addr, data, len); + return data; +} + +static u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr) +{ + struct usb_device *udev = priv->udev; + int len; + u16 data; + + mutex_lock(&priv->usb_buf_mutex); + len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_READ, + addr, 0, &priv->usb_buf.val16, sizeof(u16), + RTW_USB_CONTROL_MSG_TIMEOUT); + data = le16_to_cpu(priv->usb_buf.val16); + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) + dev_info(&udev->dev, "%s(%04x) = 0x%04x, len %i\n", + __func__, addr, data, len); + return data; +} + +static u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr) +{ + struct usb_device *udev = priv->udev; + int len; + u32 data; + + mutex_lock(&priv->usb_buf_mutex); + len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_READ, + addr, 0, &priv->usb_buf.val32, sizeof(u32), + RTW_USB_CONTROL_MSG_TIMEOUT); + data = le32_to_cpu(priv->usb_buf.val32); + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ) + dev_info(&udev->dev, "%s(%04x) = 0x%08x, len %i\n", + __func__, addr, data, len); + return data; +} + +static int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val) +{ + struct usb_device *udev = priv->udev; + int ret; + + mutex_lock(&priv->usb_buf_mutex); + priv->usb_buf.val8 = val; + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, + addr, 0, &priv->usb_buf.val8, sizeof(u8), + RTW_USB_CONTROL_MSG_TIMEOUT); + + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) + dev_info(&udev->dev, "%s(%04x) = 0x%02x\n", + __func__, addr, val); + return ret; +} + +static int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val) +{ + struct usb_device *udev = priv->udev; + int ret; + + mutex_lock(&priv->usb_buf_mutex); + priv->usb_buf.val16 = cpu_to_le16(val); + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, + addr, 0, &priv->usb_buf.val16, sizeof(u16), + RTW_USB_CONTROL_MSG_TIMEOUT); + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) + dev_info(&udev->dev, "%s(%04x) = 0x%04x\n", + __func__, addr, val); + return ret; +} + +static int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val) +{ + struct usb_device *udev = priv->udev; + int ret; + + mutex_lock(&priv->usb_buf_mutex); + priv->usb_buf.val32 = cpu_to_le32(val); + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, + addr, 0, &priv->usb_buf.val32, sizeof(u32), + RTW_USB_CONTROL_MSG_TIMEOUT); + mutex_unlock(&priv->usb_buf_mutex); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE) + dev_info(&udev->dev, "%s(%04x) = 0x%08x\n", + __func__, addr, val); + return ret; +} + +static int +rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len) +{ + struct usb_device *udev = priv->udev; + int blocksize = priv->fops->writeN_block_size; + int ret, i, count, remainder; + + count = len / blocksize; + remainder = len % blocksize; + + for (i = 0; i < count; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, + addr, 0, buf, blocksize, + RTW_USB_CONTROL_MSG_TIMEOUT); + if (ret != blocksize) + goto write_error; + + addr += blocksize; + buf += blocksize; + } + + if (remainder) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE, + addr, 0, buf, remainder, + RTW_USB_CONTROL_MSG_TIMEOUT); + if (ret != remainder) + goto write_error; + } + + return len; + +write_error: + dev_info(&udev->dev, + "%s: Failed to write block at addr: %04x size: %04x\n", + __func__, addr, blocksize); + return -EAGAIN; +} + +static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg) +{ + u32 hssia, val32, retval; + + hssia = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2); + if (path != RF_A) + val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm2); + else + val32 = hssia; + + val32 &= ~FPGA0_HSSI_PARM2_ADDR_MASK; + val32 |= (reg << FPGA0_HSSI_PARM2_ADDR_SHIFT); + val32 |= FPGA0_HSSI_PARM2_EDGE_READ; + hssia &= ~FPGA0_HSSI_PARM2_EDGE_READ; + rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia); + + udelay(10); + + rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].hssiparm2, val32); + udelay(100); + + hssia |= FPGA0_HSSI_PARM2_EDGE_READ; + rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia); + udelay(10); + + val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm1); + if (val32 & FPGA0_HSSI_PARM1_PI) + retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hspiread); + else + retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].lssiread); + + retval &= 0xfffff; + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_READ) + dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n", + __func__, reg, retval); + return retval; +} + +/* + * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can + * have write issues in high temperature conditions. We may have to + * retry writing them. + */ +static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg, u32 data) +{ + int ret, retval; + u32 dataaddr, val32; + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_WRITE) + dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n", + __func__, reg, data); + + data &= FPGA0_LSSI_PARM_DATA_MASK; + dataaddr = (reg << FPGA0_LSSI_PARM_ADDR_SHIFT) | data; + + if (priv->rtl_chip == RTL8192E) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); + val32 &= ~0x20000; + rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); + } + + /* Use XB for path B */ + ret = rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].lssiparm, dataaddr); + if (ret != sizeof(dataaddr)) + retval = -EIO; + else + retval = 0; + + udelay(1); + + if (priv->rtl_chip == RTL8192E) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); + val32 |= 0x20000; + rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); + } + + return retval; +} + +static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, + struct h2c_cmd *h2c, int len) +{ + struct device *dev = &priv->udev->dev; + int mbox_nr, retry, retval = 0; + int mbox_reg, mbox_ext_reg; + u8 val8; + + mutex_lock(&priv->h2c_mutex); + + mbox_nr = priv->next_mbox; + mbox_reg = REG_HMBOX_0 + (mbox_nr * 4); + mbox_ext_reg = priv->fops->mbox_ext_reg + + (mbox_nr * priv->fops->mbox_ext_width); + + /* + * MBOX ready? + */ + retry = 100; + do { + val8 = rtl8xxxu_read8(priv, REG_HMTFR); + if (!(val8 & BIT(mbox_nr))) + break; + } while (retry--); + + if (!retry) { + dev_info(dev, "%s: Mailbox busy\n", __func__); + retval = -EBUSY; + goto error; + } + + /* + * Need to swap as it's being swapped again by rtl8xxxu_write16/32() + */ + if (len > sizeof(u32)) { + if (priv->fops->mbox_ext_width == 4) { + rtl8xxxu_write32(priv, mbox_ext_reg, + le32_to_cpu(h2c->raw_wide.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %08x\n", + le32_to_cpu(h2c->raw_wide.ext)); + } else { + rtl8xxxu_write16(priv, mbox_ext_reg, + le16_to_cpu(h2c->raw.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %04x\n", + le16_to_cpu(h2c->raw.ext)); + } + } + rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data)); + + priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX; + +error: + mutex_unlock(&priv->h2c_mutex); + return retval; +} + +static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) +{ + struct h2c_cmd h2c; + int reqnum = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.data = data; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + + reqnum++; + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.addr = reg; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); +} + +static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + + val8 = rtl8xxxu_read8(priv, REG_SPS0_CTRL); + val8 |= BIT(0) | BIT(3); + rtl8xxxu_write8(priv, REG_SPS0_CTRL, val8); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM); + val32 &= ~(BIT(4) | BIT(5)); + val32 |= BIT(3); + if (priv->rf_paths == 2) { + val32 &= ~(BIT(20) | BIT(21)); + val32 |= BIT(19); + } + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); + val32 &= ~OFDM_RF_PATH_TX_MASK; + if (priv->tx_paths == 2) + val32 |= OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B; + else if (priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C) + val32 |= OFDM_RF_PATH_TX_B; + else + val32 |= OFDM_RF_PATH_TX_A; + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE_JAPAN; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + if (priv->rf_paths == 2) + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x63db25a0); + else + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x631b25a0); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x32d95); + if (priv->rf_paths == 2) + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x32d95); + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); +} + +static void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv) +{ + u8 sps0; + u32 val32; + + sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL); + + /* RF RX code for preamble power saving */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM); + val32 &= ~(BIT(3) | BIT(4) | BIT(5)); + if (priv->rf_paths == 2) + val32 &= ~(BIT(19) | BIT(20) | BIT(21)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32); + + /* Disable TX for four paths */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); + val32 &= ~OFDM_RF_PATH_TX_MASK; + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); + + /* Enable power saving */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= FPGA_RF_MODE_JAPAN; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + /* AFE control register to power down bits [30:22] */ + if (priv->rf_paths == 2) + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00db25a0); + else + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x001b25a0); + + /* Power down RF module */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0); + if (priv->rf_paths == 2) + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0); + + sps0 &= ~(BIT(0) | BIT(3)); + rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0); +} + + +static void rtl8723a_stop_tx_beacon(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2); + val8 &= ~BIT(6); + rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8); + + rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x64); + val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8); +} + + +/* + * The rtl8723a has 3 channel groups for it's efuse settings. It only + * supports the 2.4GHz band, so channels 1 - 14: + * group 0: channels 1 - 3 + * group 1: channels 4 - 9 + * group 2: channels 10 - 14 + * + * Note: We index from 0 in the code + */ +static int rtl8723a_channel_to_group(int channel) +{ + int group; + + if (channel < 4) + group = 0; + else if (channel < 10) + group = 1; + else + group = 2; + + return group; +} + +/* + * Valid for rtl8723bu and rtl8192eu + */ +static int rtl8xxxu_gen2_channel_to_group(int channel) +{ + int group; + + if (channel < 3) + group = 0; + else if (channel < 6) + group = 1; + else if (channel < 9) + group = 2; + else if (channel < 12) + group = 3; + else + group = 4; + + return group; +} + +static void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u32 val32, rsr; + u8 val8, opmode; + bool ht = true; + int sec_ch_above, channel; + int i; + + opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE); + rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + channel = hw->conf.chandef.chan->hw_value; + + switch (hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + ht = false; + case NL80211_CHAN_WIDTH_20: + opmode |= BW_OPMODE_20MHZ; + rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2); + val32 |= FPGA0_ANALOG2_20MHZ; + rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32); + break; + case NL80211_CHAN_WIDTH_40: + if (hw->conf.chandef.center_freq1 > + hw->conf.chandef.chan->center_freq) { + sec_ch_above = 1; + channel += 2; + } else { + sec_ch_above = 0; + channel -= 2; + } + + opmode &= ~BW_OPMODE_20MHZ; + rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode); + rsr &= ~RSR_RSC_BANDWIDTH_40M; + if (sec_ch_above) + rsr |= RSR_RSC_UPPER_SUB_CHANNEL; + else + rsr |= RSR_RSC_LOWER_SUB_CHANNEL; + rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + /* + * Set Control channel to upper or lower. These settings + * are required only for 40MHz + */ + val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); + val32 &= ~CCK0_SIDEBAND; + if (!sec_ch_above) + val32 |= CCK0_SIDEBAND; + rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); + val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */ + if (sec_ch_above) + val32 |= OFDM_LSTF_PRIME_CH_LOW; + else + val32 |= OFDM_LSTF_PRIME_CH_HIGH; + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2); + val32 &= ~FPGA0_ANALOG2_20MHZ; + rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); + val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL); + if (sec_ch_above) + val32 |= FPGA0_PS_UPPER_CHANNEL; + else + val32 |= FPGA0_PS_LOWER_CHANNEL; + rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); + break; + + default: + break; + } + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_CHANNEL_MASK; + val32 |= channel; + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } + + if (ht) + val8 = 0x0e; + else + val8 = 0x0a; + + rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8); + rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8); + + rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808); + rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a); + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) + val32 &= ~MODE_AG_CHANNEL_20MHZ; + else + val32 |= MODE_AG_CHANNEL_20MHZ; + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } +} + +static void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u32 val32, rsr; + u8 val8, subchannel; + u16 rf_mode_bw; + bool ht = true; + int sec_ch_above, channel; + int i; + + rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL); + rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK; + rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + channel = hw->conf.chandef.chan->hw_value; + +/* Hack */ + subchannel = 0; + + switch (hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + ht = false; + case NL80211_CHAN_WIDTH_20: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20; + subchannel = 0; + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT); + val32 &= ~(BIT(30) | BIT(31)); + rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32); + + break; + case NL80211_CHAN_WIDTH_40: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40; + + if (hw->conf.chandef.center_freq1 > + hw->conf.chandef.chan->center_freq) { + sec_ch_above = 1; + channel += 2; + } else { + sec_ch_above = 0; + channel -= 2; + } + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + /* + * Set Control channel to upper or lower. These settings + * are required only for 40MHz + */ + val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); + val32 &= ~CCK0_SIDEBAND; + if (!sec_ch_above) + val32 |= CCK0_SIDEBAND; + rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); + val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */ + if (sec_ch_above) + val32 |= OFDM_LSTF_PRIME_CH_LOW; + else + val32 |= OFDM_LSTF_PRIME_CH_HIGH; + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); + val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL); + if (sec_ch_above) + val32 |= FPGA0_PS_UPPER_CHANNEL; + else + val32 |= FPGA0_PS_LOWER_CHANNEL; + rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); + break; + case NL80211_CHAN_WIDTH_80: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80; + break; + default: + break; + } + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_CHANNEL_MASK; + val32 |= channel; + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } + + rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw); + rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel); + + if (ht) + val8 = 0x0e; + else + val8 = 0x0a; + + rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8); + rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8); + + rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808); + rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a); + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_BW_MASK; + switch(hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_80: + val32 |= MODE_AG_BW_80MHZ_8723B; + break; + case NL80211_CHAN_WIDTH_40: + val32 |= MODE_AG_BW_40MHZ_8723B; + break; + default: + val32 |= MODE_AG_BW_20MHZ_8723B; + break; + } + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } +} + +static void +rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + struct rtl8xxxu_power_base *power_base = priv->power_base; + u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS]; + u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS]; + u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b; + u8 val8; + int group, i; + + group = rtl8723a_channel_to_group(channel); + + cck[0] = priv->cck_tx_power_index_A[group] - 1; + cck[1] = priv->cck_tx_power_index_B[group] - 1; + + if (priv->hi_pa) { + if (cck[0] > 0x20) + cck[0] = 0x20; + if (cck[1] > 0x20) + cck[1] = 0x20; + } + + ofdm[0] = priv->ht40_1s_tx_power_index_A[group]; + ofdm[1] = priv->ht40_1s_tx_power_index_B[group]; + if (ofdm[0]) + ofdm[0] -= 1; + if (ofdm[1]) + ofdm[1] -= 1; + + ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a; + ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b; + + mcsbase[0] = ofdm[0]; + mcsbase[1] = ofdm[1]; + if (!ht40) { + mcsbase[0] += priv->ht20_tx_power_index_diff[group].a; + mcsbase[1] += priv->ht20_tx_power_index_diff[group].b; + } + + if (priv->tx_paths > 1) { + if (ofdm[0] > priv->ht40_2s_tx_power_index_diff[group].a) + ofdm[0] -= priv->ht40_2s_tx_power_index_diff[group].a; + if (ofdm[1] > priv->ht40_2s_tx_power_index_diff[group].b) + ofdm[1] -= priv->ht40_2s_tx_power_index_diff[group].b; + } + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL) + dev_info(&priv->udev->dev, + "%s: Setting TX power CCK A: %02x, " + "CCK B: %02x, OFDM A: %02x, OFDM B: %02x\n", + __func__, cck[0], cck[1], ofdm[0], ofdm[1]); + + for (i = 0; i < RTL8723A_MAX_RF_PATHS; i++) { + if (cck[i] > RF6052_MAX_TX_PWR) + cck[i] = RF6052_MAX_TX_PWR; + if (ofdm[i] > RF6052_MAX_TX_PWR) + ofdm[i] = RF6052_MAX_TX_PWR; + } + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck[0] << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck[0] << 8) | (cck[0] << 16) | (cck[0] << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xffffff00; + val32 |= cck[1]; + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); + val32 &= 0xff; + val32 |= ((cck[1] << 8) | (cck[1] << 16) | (cck[1] << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); + + ofdm_a = ofdmbase[0] | ofdmbase[0] << 8 | + ofdmbase[0] << 16 | ofdmbase[0] << 24; + ofdm_b = ofdmbase[1] | ofdmbase[1] << 8 | + ofdmbase[1] << 16 | ofdmbase[1] << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, + ofdm_a + power_base->reg_0e00); + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, + ofdm_b + power_base->reg_0830); + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, + ofdm_a + power_base->reg_0e04); + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, + ofdm_b + power_base->reg_0834); + + mcs_a = mcsbase[0] | mcsbase[0] << 8 | + mcsbase[0] << 16 | mcsbase[0] << 24; + mcs_b = mcsbase[1] | mcsbase[1] << 8 | + mcsbase[1] << 16 | mcsbase[1] << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, + mcs_a + power_base->reg_0e10); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, + mcs_b + power_base->reg_083c); + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, + mcs_a + power_base->reg_0e14); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, + mcs_b + power_base->reg_0848); + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, + mcs_a + power_base->reg_0e18); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, + mcs_b + power_base->reg_084c); + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, + mcs_a + power_base->reg_0e1c); + for (i = 0; i < 3; i++) { + if (i != 2) + val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0; + else + val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0; + rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8); + } + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, + mcs_b + power_base->reg_0868); + for (i = 0; i < 3; i++) { + if (i != 2) + val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0; + else + val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0; + rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8); + } +} + +static void +rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8xxxu_gen2_channel_to_group(channel); + + cck = priv->cck_tx_power_index_B[group]; + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); +} + +static void +rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8xxxu_gen2_channel_to_group(channel); + + cck = priv->cck_tx_power_index_A[group]; + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_A[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_A[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].a; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].a; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs); + + if (priv->tx_paths > 1) { + cck = priv->cck_tx_power_index_B[group]; + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xffffff00; + val32 |= cck; + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | + ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs); + } +} + +static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv, + enum nl80211_iftype linktype) +{ + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_MSR); + val8 &= ~MSR_LINKTYPE_MASK; + + switch (linktype) { + case NL80211_IFTYPE_UNSPECIFIED: + val8 |= MSR_LINKTYPE_NONE; + break; + case NL80211_IFTYPE_ADHOC: + val8 |= MSR_LINKTYPE_ADHOC; + break; + case NL80211_IFTYPE_STATION: + val8 |= MSR_LINKTYPE_STATION; + break; + case NL80211_IFTYPE_AP: + val8 |= MSR_LINKTYPE_AP; + break; + default: + goto out; + } + + rtl8xxxu_write8(priv, REG_MSR, val8); +out: + return; +} + +static void +rtl8xxxu_set_retry(struct rtl8xxxu_priv *priv, u16 short_retry, u16 long_retry) +{ + u16 val16; + + val16 = ((short_retry << RETRY_LIMIT_SHORT_SHIFT) & + RETRY_LIMIT_SHORT_MASK) | + ((long_retry << RETRY_LIMIT_LONG_SHIFT) & + RETRY_LIMIT_LONG_MASK); + + rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16); +} + +static void +rtl8xxxu_set_spec_sifs(struct rtl8xxxu_priv *priv, u16 cck, u16 ofdm) +{ + u16 val16; + + val16 = ((cck << SPEC_SIFS_CCK_SHIFT) & SPEC_SIFS_CCK_MASK) | + ((ofdm << SPEC_SIFS_OFDM_SHIFT) & SPEC_SIFS_OFDM_MASK); + + rtl8xxxu_write16(priv, REG_SPEC_SIFS, val16); +} + +static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + char *cut; + + switch (priv->chip_cut) { + case 0: + cut = "A"; + break; + case 1: + cut = "B"; + break; + case 2: + cut = "C"; + break; + case 3: + cut = "D"; + break; + case 4: + cut = "E"; + break; + default: + cut = "unknown"; + } + + dev_info(dev, + "RTL%s rev %s (%s) %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n", + priv->chip_name, cut, priv->chip_vendor, priv->tx_paths, + priv->rx_paths, priv->ep_tx_count, priv->has_wifi, + priv->has_bluetooth, priv->has_gps, priv->hi_pa); + + dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr); +} + +static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + u32 val32, bonding; + u16 val16; + + val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); + priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >> + SYS_CFG_CHIP_VERSION_SHIFT; + if (val32 & SYS_CFG_TRP_VAUX_EN) { + dev_info(dev, "Unsupported test chip\n"); + return -ENOTSUPP; + } + + if (val32 & SYS_CFG_BT_FUNC) { + if (priv->chip_cut >= 3) { + sprintf(priv->chip_name, "8723BU"); + priv->rtl_chip = RTL8723B; + } else { + sprintf(priv->chip_name, "8723AU"); + priv->usb_interrupts = 1; + priv->rtl_chip = RTL8723A; + } + + priv->rf_paths = 1; + priv->rx_paths = 1; + priv->tx_paths = 1; + + val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL); + if (val32 & MULTI_WIFI_FUNC_EN) + priv->has_wifi = 1; + if (val32 & MULTI_BT_FUNC_EN) + priv->has_bluetooth = 1; + if (val32 & MULTI_GPS_FUNC_EN) + priv->has_gps = 1; + priv->is_multi_func = 1; + } else if (val32 & SYS_CFG_TYPE_ID) { + bonding = rtl8xxxu_read32(priv, REG_HPON_FSM); + bonding &= HPON_FSM_BONDING_MASK; + if (priv->fops->tx_desc_size == + sizeof(struct rtl8xxxu_txdesc40)) { + if (bonding == HPON_FSM_BONDING_1T2R) { + sprintf(priv->chip_name, "8191EU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 1; + priv->rtl_chip = RTL8191E; + } else { + sprintf(priv->chip_name, "8192EU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 2; + priv->rtl_chip = RTL8192E; + } + } else if (bonding == HPON_FSM_BONDING_1T2R) { + sprintf(priv->chip_name, "8191CU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 1; + priv->usb_interrupts = 1; + priv->rtl_chip = RTL8191C; + } else { + sprintf(priv->chip_name, "8192CU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 2; + priv->usb_interrupts = 1; + priv->rtl_chip = RTL8192C; + } + priv->has_wifi = 1; + } else { + sprintf(priv->chip_name, "8188CU"); + priv->rf_paths = 1; + priv->rx_paths = 1; + priv->tx_paths = 1; + priv->rtl_chip = RTL8188C; + priv->usb_interrupts = 1; + priv->has_wifi = 1; + } + + switch (priv->rtl_chip) { + case RTL8188E: + case RTL8192E: + case RTL8723B: + switch (val32 & SYS_CFG_VENDOR_EXT_MASK) { + case SYS_CFG_VENDOR_ID_TSMC: + sprintf(priv->chip_vendor, "TSMC"); + break; + case SYS_CFG_VENDOR_ID_SMIC: + sprintf(priv->chip_vendor, "SMIC"); + priv->vendor_smic = 1; + break; + case SYS_CFG_VENDOR_ID_UMC: + sprintf(priv->chip_vendor, "UMC"); + priv->vendor_umc = 1; + break; + default: + sprintf(priv->chip_vendor, "unknown"); + } + break; + default: + if (val32 & SYS_CFG_VENDOR_ID) { + sprintf(priv->chip_vendor, "UMC"); + priv->vendor_umc = 1; + } else { + sprintf(priv->chip_vendor, "TSMC"); + } + } + + val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS); + priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28; + + val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX); + if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) { + priv->ep_tx_high_queue = 1; + priv->ep_tx_count++; + } + + if (val16 & NORMAL_SIE_EP_TX_NORMAL_MASK) { + priv->ep_tx_normal_queue = 1; + priv->ep_tx_count++; + } + + if (val16 & NORMAL_SIE_EP_TX_LOW_MASK) { + priv->ep_tx_low_queue = 1; + priv->ep_tx_count++; + } + + /* + * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX + */ + if (!priv->ep_tx_count) { + switch (priv->nr_out_eps) { + case 4: + case 3: + priv->ep_tx_low_queue = 1; + priv->ep_tx_count++; + case 2: + priv->ep_tx_normal_queue = 1; + priv->ep_tx_count++; + case 1: + priv->ep_tx_high_queue = 1; + priv->ep_tx_count++; + break; + default: + dev_info(dev, "Unsupported USB TX end-points\n"); + return -ENOTSUPP; + } + } + + return 0; +} + +static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); + memcpy(priv->cck_tx_power_index_B, + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); + + memcpy(priv->ht20_tx_power_index_diff, + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); + memcpy(priv->ofdm_tx_power_index_diff, + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); + + memcpy(priv->ht40_max_power_offset, + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); + memcpy(priv->ht20_max_power_offset, + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); + + if (priv->efuse_wifi.efuse8723.version >= 0x01) { + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; + } + + priv->power_base = &rtl8723a_power_base; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", + efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.41s\n", + efuse->device_name); + return 0; +} + +static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ofdm_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; + priv->ofdm_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + int i; + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8723bu_efuse)); + for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + + return 0; +} + +#ifdef CONFIG_RTL8XXXU_UNTESTED + +static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); + memcpy(priv->cck_tx_power_index_B, + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); + memcpy(priv->ht40_2s_tx_power_index_diff, + efuse->ht40_2s_tx_power_index_diff, + sizeof(efuse->ht40_2s_tx_power_index_diff)); + + memcpy(priv->ht20_tx_power_index_diff, + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); + memcpy(priv->ofdm_tx_power_index_diff, + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); + + memcpy(priv->ht40_max_power_offset, + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); + memcpy(priv->ht20_max_power_offset, + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", + efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.20s\n", + efuse->device_name); + + priv->power_base = &rtl8192c_power_base; + + if (efuse->rf_regulatory & 0x20) { + sprintf(priv->chip_name, "8188RU"); + priv->rtl_chip = RTL8188R; + priv->hi_pa = 1; + priv->no_pape = 1; + priv->power_base = &rtl8188r_power_base; + } + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8192cu_efuse)); + for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + return 0; +} + +#endif + +static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name); + dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8192eu_efuse)); + for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + return 0; +} + +static int +rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) +{ + int i; + u8 val8; + u32 val32; + + /* Write Address */ + rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 1, offset & 0xff); + val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 2); + val8 &= 0xfc; + val8 |= (offset >> 8) & 0x03; + rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 2, val8); + + val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 3); + rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 3, val8 & 0x7f); + + /* Poll for data read */ + val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); + for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) { + val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); + if (val32 & BIT(31)) + break; + } + + if (i == RTL8XXXU_MAX_REG_POLL) + return -EIO; + + udelay(50); + val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); + + *data = val32 & 0xff; + return 0; +} + +static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int i, ret = 0; + u8 val8, word_mask, header, extheader; + u16 val16, efuse_addr, offset; + u32 val32; + + val16 = rtl8xxxu_read16(priv, REG_9346CR); + if (val16 & EEPROM_ENABLE) + priv->has_eeprom = 1; + if (val16 & EEPROM_BOOT) + priv->boot_eeprom = 1; + + if (priv->is_multi_func) { + val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST); + val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT; + rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32); + } + + dev_dbg(dev, "Booting from %s\n", + priv->boot_eeprom ? "EEPROM" : "EFUSE"); + + rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_ENABLE); + + /* 1.2V Power: From VDDON with Power Cut(0x0000[15]), default valid */ + val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); + if (!(val16 & SYS_ISO_PWC_EV12V)) { + val16 |= SYS_ISO_PWC_EV12V; + rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); + } + /* Reset: 0x0000[28], default valid */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + if (!(val16 & SYS_FUNC_ELDR)) { + val16 |= SYS_FUNC_ELDR; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + } + + /* + * Clock: Gated(0x0008[5]) 8M(0x0008[1]) clock from ANA, default valid + */ + val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR); + if (!(val16 & SYS_CLK_LOADER_ENABLE) || !(val16 & SYS_CLK_ANA8M)) { + val16 |= (SYS_CLK_LOADER_ENABLE | SYS_CLK_ANA8M); + rtl8xxxu_write16(priv, REG_SYS_CLKR, val16); + } + + /* Default value is 0xff */ + memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN); + + efuse_addr = 0; + while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) { + u16 map_addr; + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header); + if (ret || header == 0xff) + goto exit; + + if ((header & 0x1f) == 0x0f) { /* extended header */ + offset = (header & 0xe0) >> 5; + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, + &extheader); + if (ret) + goto exit; + /* All words disabled */ + if ((extheader & 0x0f) == 0x0f) + continue; + + offset |= ((extheader & 0xf0) >> 1); + word_mask = extheader & 0x0f; + } else { + offset = (header >> 4) & 0x0f; + word_mask = header & 0x0f; + } + + /* Get word enable value from PG header */ + + /* We have 8 bits to indicate validity */ + map_addr = offset * 8; + if (map_addr >= EFUSE_MAP_LEN) { + dev_warn(dev, "%s: Illegal map_addr (%04x), " + "efuse corrupt!\n", + __func__, map_addr); + ret = -EINVAL; + goto exit; + } + for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { + /* Check word enable condition in the section */ + if (word_mask & BIT(i)) { + map_addr += 2; + continue; + } + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); + if (ret) + goto exit; + priv->efuse_wifi.raw[map_addr++] = val8; + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); + if (ret) + goto exit; + priv->efuse_wifi.raw[map_addr++] = val8; + } + } + +exit: + rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_DISABLE); + + return ret; +} + +static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + +static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + +static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int ret = 0, i; + u32 val32; + + /* Poll checksum report */ + for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) { + val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); + if (val32 & MCU_FW_DL_CSUM_REPORT) + break; + } + + if (i == RTL8XXXU_FIRMWARE_POLL_MAX) { + dev_warn(dev, "Firmware checksum poll timed out\n"); + ret = -EAGAIN; + goto exit; + } + + val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); + val32 |= MCU_FW_DL_READY; + val32 &= ~MCU_WINT_INIT_READY; + rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); + + /* + * Reset the 8051 in order for the firmware to start running, + * otherwise it won't come up on the 8192eu + */ + priv->fops->reset_8051(priv); + + /* Wait for firmware to become ready */ + for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) { + val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); + if (val32 & MCU_WINT_INIT_READY) + break; + + udelay(100); + } + + if (i == RTL8XXXU_FIRMWARE_POLL_MAX) { + dev_warn(dev, "Firmware failed to start\n"); + ret = -EAGAIN; + goto exit; + } + + /* + * Init H2C command + */ + if (priv->rtl_chip == RTL8723B) + rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); +exit: + return ret; +} + +static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) +{ + int pages, remainder, i, ret; + u8 val8; + u16 val16; + u32 val32; + u8 *fwptr; + + val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC + 1); + val8 |= 4; + rtl8xxxu_write8(priv, REG_SYS_FUNC + 1, val8); + + /* 8051 enable */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); + if (val8 & MCU_FW_RAM_SEL) { + pr_info("do the RAM reset\n"); + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + priv->fops->reset_8051(priv); + } + + /* MCU firmware download enable */ + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); + val8 |= MCU_FW_DL_ENABLE; + rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); + + /* 8051 reset */ + val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); + val32 &= ~BIT(19); + rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); + + /* Reset firmware download checksum */ + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); + val8 |= MCU_FW_DL_CSUM_REPORT; + rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); + + pages = priv->fw_size / RTL_FW_PAGE_SIZE; + remainder = priv->fw_size % RTL_FW_PAGE_SIZE; + + fwptr = priv->fw_data->data; + + for (i = 0; i < pages; i++) { + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; + val8 |= i; + rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); + + ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, + fwptr, RTL_FW_PAGE_SIZE); + if (ret != RTL_FW_PAGE_SIZE) { + ret = -EAGAIN; + goto fw_abort; + } + + fwptr += RTL_FW_PAGE_SIZE; + } + + if (remainder) { + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; + val8 |= i; + rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); + ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, + fwptr, remainder); + if (ret != remainder) { + ret = -EAGAIN; + goto fw_abort; + } + } + + ret = 0; +fw_abort: + /* MCU firmware download disable */ + val16 = rtl8xxxu_read16(priv, REG_MCU_FW_DL); + val16 &= ~MCU_FW_DL_ENABLE; + rtl8xxxu_write16(priv, REG_MCU_FW_DL, val16); + + return ret; +} + +static int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) +{ + struct device *dev = &priv->udev->dev; + const struct firmware *fw; + int ret = 0; + u16 signature; + + dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name); + if (request_firmware(&fw, fw_name, &priv->udev->dev)) { + dev_warn(dev, "request_firmware(%s) failed\n", fw_name); + ret = -EAGAIN; + goto exit; + } + if (!fw) { + dev_warn(dev, "Firmware data not available\n"); + ret = -EINVAL; + goto exit; + } + + priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL); + if (!priv->fw_data) { + ret = -ENOMEM; + goto exit; + } + priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header); + + signature = le16_to_cpu(priv->fw_data->signature); + switch (signature & 0xfff0) { + case 0x92e0: + case 0x92c0: + case 0x88c0: + case 0x5300: + case 0x2300: + break; + default: + ret = -EINVAL; + dev_warn(dev, "%s: Invalid firmware signature: 0x%04x\n", + __func__, signature); + } + + dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n", + le16_to_cpu(priv->fw_data->major_version), + priv->fw_data->minor_version, signature); + +exit: + release_firmware(fw); + return ret; +} + +static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + switch (priv->chip_cut) { + case 0: + fw_name = "rtlwifi/rtl8723aufw_A.bin"; + break; + case 1: + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723aufw_B.bin"; + else + fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin"; + + break; + default: + return -EINVAL; + } + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + +static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723bu_bt.bin"; + else + fw_name = "rtlwifi/rtl8723bu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + +#ifdef CONFIG_RTL8XXXU_UNTESTED + +static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + if (!priv->vendor_umc) + fw_name = "rtlwifi/rtl8192cufw_TMSC.bin"; + else if (priv->chip_cut || priv->rtl_chip == RTL8192C) + fw_name = "rtlwifi/rtl8192cufw_B.bin"; + else + fw_name = "rtlwifi/rtl8192cufw_A.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + +#endif + +static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + fw_name = "rtlwifi/rtl8192eu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + +static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) +{ + u16 val16; + int i = 100; + + /* Inform 8051 to perform reset */ + rtl8xxxu_write8(priv, REG_HMTFR + 3, 0x20); + + for (i = 100; i > 0; i--) { + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + + if (!(val16 & SYS_FUNC_CPU_ENABLE)) { + dev_dbg(&priv->udev->dev, + "%s: Firmware self reset success!\n", __func__); + break; + } + udelay(50); + } + + if (!i) { + /* Force firmware reset */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + } +} + +static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); + val32 &= ~(BIT(20) | BIT(24)); + rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 &= ~BIT(4); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 |= BIT(3); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= BIT(24); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); + val32 &= 0xffffff00; + val32 |= 0x77; + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); +} + +static int +rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_reg8val *array = priv->fops->mactable; + int i, ret; + u16 reg; + u8 val; + + for (i = 0; ; i++) { + reg = array[i].reg; + val = array[i].val; + + if (reg == 0xffff && val == 0xff) + break; + + ret = rtl8xxxu_write8(priv, reg, val); + if (ret != 1) { + dev_warn(&priv->udev->dev, + "Failed to initialize MAC " + "(reg: %04x, val %02x)\n", reg, val); + return -EAGAIN; + } + } + + if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) + rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a); + + return 0; +} + +static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_reg32val *array) +{ + int i, ret; + u16 reg; + u32 val; + + for (i = 0; ; i++) { + reg = array[i].reg; + val = array[i].val; + + if (reg == 0xffff && val == 0xffffffff) + break; + + ret = rtl8xxxu_write32(priv, reg, val); + if (ret != sizeof(val)) { + dev_warn(&priv->udev->dev, + "Failed to initialize PHY\n"); + return -EAGAIN; + } + udelay(1); + } + + return 0; +} + +static void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8, ldoa15, ldov12d, lpldo, ldohci12; + u16 val16; + u32 val32; + + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + udelay(2); + val8 |= AFE_PLL_320_ENABLE; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + udelay(2); + + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff); + udelay(2); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL); + val32 &= ~AFE_XTAL_RF_GATE; + if (priv->has_bluetooth) + val32 &= ~AFE_XTAL_BT_GATE; + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table); + else if (priv->tx_paths == 2) + rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table); + + if (priv->rtl_chip == RTL8188R && priv->hi_pa && + priv->vendor_umc && priv->chip_cut == 1) + rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table); + + ldoa15 = LDOA15_ENABLE | LDOA15_OBUF; + ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT); + ldohci12 = 0x57; + lpldo = 1; + val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15; + rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32); +} + +static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + /* Why? */ + rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); + rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); + rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); + + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); +} + +static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD | SYS_FUNC_DIO_RF | + SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB); + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table); +} + +/* + * Most of this is black magic retrieved from the old rtl8723au driver + */ +static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + + priv->fops->init_phy_bb(priv); + + if (priv->tx_paths == 1 && priv->rx_paths == 2) { + /* + * For 1T2R boards, patch the registers. + * + * It looks like 8191/2 1T2R boards use path B for TX + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_TX_INFO); + val32 &= ~(BIT(0) | BIT(1)); + val32 |= BIT(1); + rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_TX_INFO); + val32 &= ~0x300033; + val32 |= 0x200022; + rtl8xxxu_write32(priv, REG_FPGA1_TX_INFO, val32); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 &= ~CCK0_AFE_RX_MASK; + val32 &= 0x00ffffff; + val32 |= 0x40000000; + val32 |= CCK0_AFE_RX_ANT_B; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); + val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK); + val32 |= (OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B | + OFDM_RF_PATH_TX_B); + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_PARM1); + val32 &= ~(BIT(4) | BIT(5)); + val32 |= BIT(4); + rtl8xxxu_write32(priv, REG_OFDM0_AGC_PARM1, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_CCK_RFON); + val32 &= ~(BIT(27) | BIT(26)); + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_TX_CCK_RFON, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_CCK_BBON); + val32 &= ~(BIT(27) | BIT(26)); + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_TX_CCK_BBON, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_RFON); + val32 &= ~(BIT(27) | BIT(26)); + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_TX_OFDM_RFON, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_BBON); + val32 &= ~(BIT(27) | BIT(26)); + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_TX_OFDM_BBON, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_TO_TX); + val32 &= ~(BIT(27) | BIT(26)); + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_TX_TO_TX, val32); + } + + if (priv->has_xtalk) { + val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL); + + val8 = priv->xtalk; + val32 &= 0xff000fff; + val32 |= ((val8 | (val8 << 6)) << 12); + + rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32); + } + + if (priv->rtl_chip == RTL8192E) + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x000f81fb); + + return 0; +} + +static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rfregval *array, + enum rtl8xxxu_rfpath path) +{ + int i, ret; + u8 reg; + u32 val; + + for (i = 0; ; i++) { + reg = array[i].reg; + val = array[i].val; + + if (reg == 0xff && val == 0xffffffff) + break; + + switch (reg) { + case 0xfe: + msleep(50); + continue; + case 0xfd: + mdelay(5); + continue; + case 0xfc: + mdelay(1); + continue; + case 0xfb: + udelay(50); + continue; + case 0xfa: + udelay(5); + continue; + case 0xf9: + udelay(1); + continue; + } + + ret = rtl8xxxu_write_rfreg(priv, path, reg, val); + if (ret) { + dev_warn(&priv->udev->dev, + "Failed to initialize RF\n"); + return -EAGAIN; + } + udelay(1); + } + + return 0; +} + +static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rfregval *table, + enum rtl8xxxu_rfpath path) +{ + u32 val32; + u16 val16, rfsi_rfenv; + u16 reg_sw_ctrl, reg_int_oe, reg_hssi_parm2; + + switch (path) { + case RF_A: + reg_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL; + reg_int_oe = REG_FPGA0_XA_RF_INT_OE; + reg_hssi_parm2 = REG_FPGA0_XA_HSSI_PARM2; + break; + case RF_B: + reg_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL; + reg_int_oe = REG_FPGA0_XB_RF_INT_OE; + reg_hssi_parm2 = REG_FPGA0_XB_HSSI_PARM2; + break; + default: + dev_err(&priv->udev->dev, "%s:Unsupported RF path %c\n", + __func__, path + 'A'); + return -EINVAL; + } + /* For path B, use XB */ + rfsi_rfenv = rtl8xxxu_read16(priv, reg_sw_ctrl); + rfsi_rfenv &= FPGA0_RF_RFENV; + + /* + * These two we might be able to optimize into one + */ + val32 = rtl8xxxu_read32(priv, reg_int_oe); + val32 |= BIT(20); /* 0x10 << 16 */ + rtl8xxxu_write32(priv, reg_int_oe, val32); + udelay(1); + + val32 = rtl8xxxu_read32(priv, reg_int_oe); + val32 |= BIT(4); + rtl8xxxu_write32(priv, reg_int_oe, val32); + udelay(1); + + /* + * These two we might be able to optimize into one + */ + val32 = rtl8xxxu_read32(priv, reg_hssi_parm2); + val32 &= ~FPGA0_HSSI_3WIRE_ADDR_LEN; + rtl8xxxu_write32(priv, reg_hssi_parm2, val32); + udelay(1); + + val32 = rtl8xxxu_read32(priv, reg_hssi_parm2); + val32 &= ~FPGA0_HSSI_3WIRE_DATA_LEN; + rtl8xxxu_write32(priv, reg_hssi_parm2, val32); + udelay(1); + + rtl8xxxu_init_rf_regs(priv, table, path); + + /* For path B, use XB */ + val16 = rtl8xxxu_read16(priv, reg_sw_ctrl); + val16 &= ~FPGA0_RF_RFENV; + val16 |= rfsi_rfenv; + rtl8xxxu_write16(priv, reg_sw_ctrl, val16); + + return 0; +} + +static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A); + + /* Reduce 80M spur */ + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + + return ret; +} + +static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); + /* + * PHY LCK + */ + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); + msleep(200); + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); + + return ret; +} + +#ifdef CONFIG_RTL8XXXU_UNTESTED +static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_rfregval *rftable; + int ret; + + if (priv->rtl_chip == RTL8188R) { + rftable = rtl8188ru_radioa_1t_highpa_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + } else if (priv->rf_paths == 1) { + rftable = rtl8192cu_radioa_1t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + } else { + rftable = rtl8192cu_radioa_2t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + if (ret) + goto exit; + rftable = rtl8192cu_radiob_2t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B); + } + +exit: + return ret; +} +#endif + +static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A); + if (ret) + goto exit; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B); + +exit: + return ret; +} + +static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data) +{ + int ret = -EBUSY; + int count = 0; + u32 value; + + value = LLT_OP_WRITE | address << 8 | data; + + rtl8xxxu_write32(priv, REG_LLT_INIT, value); + + do { + value = rtl8xxxu_read32(priv, REG_LLT_INIT); + if ((value & LLT_OP_MASK) == LLT_OP_INACTIVE) { + ret = 0; + break; + } + } while (count++ < 20); + + return ret; +} + +static int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) +{ + int ret; + int i; + + for (i = 0; i < last_tx_page; i++) { + ret = rtl8xxxu_llt_write(priv, i, i + 1); + if (ret) + goto exit; + } + + ret = rtl8xxxu_llt_write(priv, last_tx_page, 0xff); + if (ret) + goto exit; + + /* Mark remaining pages as a ring buffer */ + for (i = last_tx_page + 1; i < 0xff; i++) { + ret = rtl8xxxu_llt_write(priv, i, (i + 1)); + if (ret) + goto exit; + } + + /* Let last entry point to the start entry of ring buffer */ + ret = rtl8xxxu_llt_write(priv, 0xff, last_tx_page + 1); + if (ret) + goto exit; + +exit: + return ret; +} + +static int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) +{ + u32 val32; + int ret = 0; + int i; + + val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); + val32 |= AUTO_LLT_INIT_LLT; + rtl8xxxu_write32(priv, REG_AUTO_LLT, val32); + + for (i = 500; i; i--) { + val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); + if (!(val32 & AUTO_LLT_INIT_LLT)) + break; + usleep_range(2, 4); + } + + if (!i) { + ret = -EBUSY; + dev_warn(&priv->udev->dev, "LLT table init failed\n"); + } + + return ret; +} + +static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv) +{ + u16 val16, hi, lo; + u16 hiq, mgq, bkq, beq, viq, voq; + int hip, mgp, bkp, bep, vip, vop; + int ret = 0; + + switch (priv->ep_tx_count) { + case 1: + if (priv->ep_tx_high_queue) { + hi = TRXDMA_QUEUE_HIGH; + } else if (priv->ep_tx_low_queue) { + hi = TRXDMA_QUEUE_LOW; + } else if (priv->ep_tx_normal_queue) { + hi = TRXDMA_QUEUE_NORMAL; + } else { + hi = 0; + ret = -EINVAL; + } + + hiq = hi; + mgq = hi; + bkq = hi; + beq = hi; + viq = hi; + voq = hi; + + hip = 0; + mgp = 0; + bkp = 0; + bep = 0; + vip = 0; + vop = 0; + break; + case 2: + if (priv->ep_tx_high_queue && priv->ep_tx_low_queue) { + hi = TRXDMA_QUEUE_HIGH; + lo = TRXDMA_QUEUE_LOW; + } else if (priv->ep_tx_normal_queue && priv->ep_tx_low_queue) { + hi = TRXDMA_QUEUE_NORMAL; + lo = TRXDMA_QUEUE_LOW; + } else if (priv->ep_tx_high_queue && priv->ep_tx_normal_queue) { + hi = TRXDMA_QUEUE_HIGH; + lo = TRXDMA_QUEUE_NORMAL; + } else { + ret = -EINVAL; + hi = 0; + lo = 0; + } + + hiq = hi; + mgq = hi; + bkq = lo; + beq = lo; + viq = hi; + voq = hi; + + hip = 0; + mgp = 0; + bkp = 1; + bep = 1; + vip = 0; + vop = 0; + break; + case 3: + beq = TRXDMA_QUEUE_LOW; + bkq = TRXDMA_QUEUE_LOW; + viq = TRXDMA_QUEUE_NORMAL; + voq = TRXDMA_QUEUE_HIGH; + mgq = TRXDMA_QUEUE_HIGH; + hiq = TRXDMA_QUEUE_HIGH; + + hip = hiq ^ 3; + mgp = mgq ^ 3; + bkp = bkq ^ 3; + bep = beq ^ 3; + vip = viq ^ 3; + vop = viq ^ 3; + break; + default: + ret = -EINVAL; + } + + /* + * None of the vendor drivers are configuring the beacon + * queue here .... why? + */ + if (!ret) { + val16 = rtl8xxxu_read16(priv, REG_TRXDMA_CTRL); + val16 &= 0x7; + val16 |= (voq << TRXDMA_CTRL_VOQ_SHIFT) | + (viq << TRXDMA_CTRL_VIQ_SHIFT) | + (beq << TRXDMA_CTRL_BEQ_SHIFT) | + (bkq << TRXDMA_CTRL_BKQ_SHIFT) | + (mgq << TRXDMA_CTRL_MGQ_SHIFT) | + (hiq << TRXDMA_CTRL_HIQ_SHIFT); + rtl8xxxu_write16(priv, REG_TRXDMA_CTRL, val16); + + priv->pipe_out[TXDESC_QUEUE_VO] = + usb_sndbulkpipe(priv->udev, priv->out_ep[vop]); + priv->pipe_out[TXDESC_QUEUE_VI] = + usb_sndbulkpipe(priv->udev, priv->out_ep[vip]); + priv->pipe_out[TXDESC_QUEUE_BE] = + usb_sndbulkpipe(priv->udev, priv->out_ep[bep]); + priv->pipe_out[TXDESC_QUEUE_BK] = + usb_sndbulkpipe(priv->udev, priv->out_ep[bkp]); + priv->pipe_out[TXDESC_QUEUE_BEACON] = + usb_sndbulkpipe(priv->udev, priv->out_ep[0]); + priv->pipe_out[TXDESC_QUEUE_MGNT] = + usb_sndbulkpipe(priv->udev, priv->out_ep[mgp]); + priv->pipe_out[TXDESC_QUEUE_HIGH] = + usb_sndbulkpipe(priv->udev, priv->out_ep[hip]); + priv->pipe_out[TXDESC_QUEUE_CMD] = + usb_sndbulkpipe(priv->udev, priv->out_ep[0]); + } + + return ret; +} + +static void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, + bool iqk_ok, int result[][8], + int candidate, bool tx_only) +{ + u32 oldval, x, tx0_a, reg; + int y, tx0_c; + u32 val32; + + if (!iqk_ok) + return; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); + oldval = val32 >> 22; + + x = result[candidate][0]; + if ((x & 0x00000200) != 0) + x = x | 0xfffffc00; + tx0_a = (x * oldval) >> 8; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); + val32 &= ~0x3ff; + val32 |= tx0_a; + rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); + val32 &= ~BIT(31); + if ((x * oldval >> 7) & 0x1) + val32 |= BIT(31); + rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); + + y = result[candidate][1]; + if ((y & 0x00000200) != 0) + y = y | 0xfffffc00; + tx0_c = (y * oldval) >> 8; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XC_TX_AFE); + val32 &= ~0xf0000000; + val32 |= (((tx0_c & 0x3c0) >> 6) << 28); + rtl8xxxu_write32(priv, REG_OFDM0_XC_TX_AFE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE); + val32 &= ~0x003f0000; + val32 |= ((tx0_c & 0x3f) << 16); + rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); + val32 &= ~BIT(29); + if ((y * oldval >> 7) & 0x1) + val32 |= BIT(29); + rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); + + if (tx_only) { + dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__); + return; + } + + reg = result[candidate][2]; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE); + val32 &= ~0x3ff; + val32 |= (reg & 0x3ff); + rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32); + + reg = result[candidate][3] & 0x3F; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE); + val32 &= ~0xfc00; + val32 |= ((reg << 10) & 0xfc00); + rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32); + + reg = (result[candidate][3] >> 6) & 0xF; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_IQ_EXT_ANTA); + val32 &= ~0xf0000000; + val32 |= (reg << 28); + rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32); +} + +static void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, + bool iqk_ok, int result[][8], + int candidate, bool tx_only) +{ + u32 oldval, x, tx1_a, reg; + int y, tx1_c; + u32 val32; + + if (!iqk_ok) + return; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); + oldval = val32 >> 22; + + x = result[candidate][4]; + if ((x & 0x00000200) != 0) + x = x | 0xfffffc00; + tx1_a = (x * oldval) >> 8; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); + val32 &= ~0x3ff; + val32 |= tx1_a; + rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); + val32 &= ~BIT(27); + if ((x * oldval >> 7) & 0x1) + val32 |= BIT(27); + rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); + + y = result[candidate][5]; + if ((y & 0x00000200) != 0) + y = y | 0xfffffc00; + tx1_c = (y * oldval) >> 8; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XD_TX_AFE); + val32 &= ~0xf0000000; + val32 |= (((tx1_c & 0x3c0) >> 6) << 28); + rtl8xxxu_write32(priv, REG_OFDM0_XD_TX_AFE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE); + val32 &= ~0x003f0000; + val32 |= ((tx1_c & 0x3f) << 16); + rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES); + val32 &= ~BIT(25); + if ((y * oldval >> 7) & 0x1) + val32 |= BIT(25); + rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32); + + if (tx_only) { + dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__); + return; + } + + reg = result[candidate][6]; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE); + val32 &= ~0x3ff; + val32 |= (reg & 0x3ff); + rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32); + + reg = result[candidate][7] & 0x3f; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE); + val32 &= ~0xfc00; + val32 |= ((reg << 10) & 0xfc00); + rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32); + + reg = (result[candidate][7] >> 6) & 0xf; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGCR_SSI_TABLE); + val32 &= ~0x0000f000; + val32 |= (reg << 12); + rtl8xxxu_write32(priv, REG_OFDM0_AGCR_SSI_TABLE, val32); +} + +#define MAX_TOLERANCE 5 + +static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv, + int result[][8], int c1, int c2) +{ + u32 i, j, diff, simubitmap, bound = 0; + int candidate[2] = {-1, -1}; /* for path A and path B */ + bool retval = true; + + if (priv->tx_paths > 1) + bound = 8; + else + bound = 4; + + simubitmap = 0; + + for (i = 0; i < bound; i++) { + diff = (result[c1][i] > result[c2][i]) ? + (result[c1][i] - result[c2][i]) : + (result[c2][i] - result[c1][i]); + if (diff > MAX_TOLERANCE) { + if ((i == 2 || i == 6) && !simubitmap) { + if (result[c1][i] + result[c1][i + 1] == 0) + candidate[(i / 4)] = c2; + else if (result[c2][i] + result[c2][i + 1] == 0) + candidate[(i / 4)] = c1; + else + simubitmap = simubitmap | (1 << i); + } else { + simubitmap = simubitmap | (1 << i); + } + } + } + + if (simubitmap == 0) { + for (i = 0; i < (bound / 4); i++) { + if (candidate[i] >= 0) { + for (j = i * 4; j < (i + 1) * 4 - 2; j++) + result[3][j] = result[candidate[i]][j]; + retval = false; + } + } + return retval; + } else if (!(simubitmap & 0x0f)) { + /* path A OK */ + for (i = 0; i < 4; i++) + result[3][i] = result[c1][i]; + } else if (!(simubitmap & 0xf0) && priv->tx_paths > 1) { + /* path B OK */ + for (i = 4; i < 8; i++) + result[3][i] = result[c1][i]; + } + + return false; +} + +static bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, + int result[][8], int c1, int c2) +{ + u32 i, j, diff, simubitmap, bound = 0; + int candidate[2] = {-1, -1}; /* for path A and path B */ + int tmp1, tmp2; + bool retval = true; + + if (priv->tx_paths > 1) + bound = 8; + else + bound = 4; + + simubitmap = 0; + + for (i = 0; i < bound; i++) { + if (i & 1) { + if ((result[c1][i] & 0x00000200)) + tmp1 = result[c1][i] | 0xfffffc00; + else + tmp1 = result[c1][i]; + + if ((result[c2][i]& 0x00000200)) + tmp2 = result[c2][i] | 0xfffffc00; + else + tmp2 = result[c2][i]; + } else { + tmp1 = result[c1][i]; + tmp2 = result[c2][i]; + } + + diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1); + + if (diff > MAX_TOLERANCE) { + if ((i == 2 || i == 6) && !simubitmap) { + if (result[c1][i] + result[c1][i + 1] == 0) + candidate[(i / 4)] = c2; + else if (result[c2][i] + result[c2][i + 1] == 0) + candidate[(i / 4)] = c1; + else + simubitmap = simubitmap | (1 << i); + } else { + simubitmap = simubitmap | (1 << i); + } + } + } + + if (simubitmap == 0) { + for (i = 0; i < (bound / 4); i++) { + if (candidate[i] >= 0) { + for (j = i * 4; j < (i + 1) * 4 - 2; j++) + result[3][j] = result[candidate[i]][j]; + retval = false; + } + } + return retval; + } else { + if (!(simubitmap & 0x03)) { + /* path A TX OK */ + for (i = 0; i < 2; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x0c)) { + /* path A RX OK */ + for (i = 2; i < 4; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x30) && priv->tx_paths > 1) { + /* path B RX OK */ + for (i = 4; i < 6; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x30) && priv->tx_paths > 1) { + /* path B RX OK */ + for (i = 6; i < 8; i++) + result[3][i] = result[c1][i]; + } + } + + return false; +} + +static void +rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup) +{ + int i; + + for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++) + backup[i] = rtl8xxxu_read8(priv, reg[i]); + + backup[i] = rtl8xxxu_read32(priv, reg[i]); +} + +static void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, + const u32 *reg, u32 *backup) +{ + int i; + + for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++) + rtl8xxxu_write8(priv, reg[i], backup[i]); + + rtl8xxxu_write32(priv, reg[i], backup[i]); +} + +static void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count) +{ + int i; + + for (i = 0; i < count; i++) + backup[i] = rtl8xxxu_read32(priv, regs[i]); +} + +static void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count) +{ + int i; + + for (i = 0; i < count; i++) + rtl8xxxu_write32(priv, regs[i], backup[i]); +} + + +static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, + bool path_a_on) +{ + u32 path_on; + int i; + + if (priv->tx_paths == 1) { + path_on = priv->fops->adda_1t_path_on; + rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init); + } else { + path_on = path_a_on ? priv->fops->adda_2t_path_on_a : + priv->fops->adda_2t_path_on_b; + + rtl8xxxu_write32(priv, regs[0], path_on); + } + + for (i = 1 ; i < RTL8XXXU_ADDA_REGS ; i++) + rtl8xxxu_write32(priv, regs[i], path_on); +} + +static void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv, + const u32 *regs, u32 *backup) +{ + int i = 0; + + rtl8xxxu_write8(priv, regs[i], 0x3f); + + for (i = 1 ; i < (RTL8XXXU_MAC_REGS - 1); i++) + rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(3))); + + rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(5))); +} + +static int rtl8xxxu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c, reg_ea4, val32; + int result = 0; + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1f); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140102); + + val32 = (priv->rf_paths > 1) ? 0x28160202 : + /*IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202: */ + 0x28160502; + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, val32); + + /* path-B IQK setting */ + if (priv->rf_paths > 1) { + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x10008c22); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x10008c22); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140102); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160202); + } + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x001028d1); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + /* If TX is OK, check whether RX is OK */ + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", + __func__); +out: + return result; +} + +static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc; + int result = 0; + + /* One shot, path B LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002); + rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else + goto out; + + if (!(reg_eac & BIT(30)) && + (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) && + (((reg_ecc & 0x03ff0000) >> 16) != 0x36)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", + __func__); +out: + return result; +} + +static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + +out: + return result; +} + +static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | + ((reg_e9c & 0x3ff0000) >> 16); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* + * Modify RX IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); + + /* + * PA, PAD setting + */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); + + /* + * RX IQK setting + */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Disable BT + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); + + val32 = (reg_eac >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000) && + ((reg_ea4 & 0x03ff0000) < 0x01100000) && + ((reg_ea4 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x02; + else /* If TX not OK, ignore RX */ + goto out; +out: + return result; +} + +static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c; + int result = 0; + + /* + * TX IQK + * PA/PAD controlled by 0x0 + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + + return result; +} + +static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* PA/PAD controlled by 0x0 */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", + __func__); + +out: + return result; +} + +static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc; + int result = 0; + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path B IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else + dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n", + __func__); + + return result; +} + +static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* + * PA/PAD controlled by 0x0 + * Vendor driver restores RF_A here which I believe is a bug + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(30)) && + ((reg_ec4 & 0x03ff0000) != 0x01320000) && + ((reg_ecc & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", + __func__); + +out: + return result; +} + +static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok, path_b_ok; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + if (t == 0) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1); + if (val32 & FPGA0_HSSI_PARM1_PI) + priv->pi_enabled = 1; + } + + if (!priv->pi_enabled) { + /* Switch BB to PI mode to do IQ Calibration. */ + rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100); + rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100); + } + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE_CCK; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); + + if (!priv->no_pape) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); + val32 |= (FPGA0_RF_PAPE | + (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + } + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); + val32 &= ~BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); + val32 &= ~BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); + + if (priv->tx_paths > 1) { + rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000); + rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000); + } + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + /* Page B init */ + rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000); + + if (priv->tx_paths > 1) + rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000); + + /* IQ calibration setting */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8xxxu_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + break; + } else if (i == (retry - 1) && path_a_ok == 0x01) { + /* TX IQK OK */ + dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n", + __func__); + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A IQK failed!\n", __func__); + + if (priv->tx_paths > 1) { + /* + * Path A into standby + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0); + rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8xxxu_iqk_path_b(priv); + if (path_b_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } else if (i == (retry - 1) && path_b_ok == 0x01) { + /* TX IQK OK */ + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + } + + /* Back to BB mode, load original value */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0); + + if (t) { + if (!priv->pi_enabled) { + /* + * Switch back BB to SI mode after finishing + * IQ Calibration + */ + val32 = 0x01000000; + rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32); + rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32); + } + + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3); + + if (priv->tx_paths > 1) { + rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, + 0x00032ed3); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok /*, path_b_ok */; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); + + /* + * RX IQ calibration setting for 8723B D cut large current issue + * when leaving IPS + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->tx_paths > 1) { +#if 1 + dev_warn(dev, "%s: Path B not supported\n", __func__); +#else + + /* + * Path A into standby + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8xxxu_iqk_path_b(priv); + if (path_b_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8723bu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); +#endif + } + + /* Back to BB mode, load original value */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->tx_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok, path_b_ok; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); + val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->rf_paths > 1) { + /* Path A into standby */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_iqk_path_b(priv); + if (path_b_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); + } + + /* Back to BB mode, load original value */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->rf_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) +{ + struct h2c_cmd h2c; + + if (priv->fops->mbox_ext_width < 4) + return; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; + h2c.bt_wlan_calibration.data = start; + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); +} + +static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + s32 reg_tmp = 0; + bool simu; + + rtl8xxxu_prepare_calibrate(priv, 1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + + for (i = 0; i < 3; i++) { + rtl8xxxu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_simularity_compare(priv, result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_simularity_compare(priv, result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_simularity_compare(priv, result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->tx_paths > 1 && reg_eb4) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_prepare_calibrate(priv, 0); +} + +static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + u32 val32, bt_control; + s32 reg_tmp = 0; + bool simu; + + rtl8xxxu_prepare_calibrate(priv, 1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + + for (i = 0; i < 3; i++) { + rtl8723bu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->tx_paths > 1 && reg_eb4) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); + + if (priv->rf_paths > 1) + dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); + + rtl8xxxu_prepare_calibrate(priv, 0); +} + +static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + bool simu; + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + for (i = 0; i < 3; i++) { + rtl8192eu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 1, 2); + if (simu) + candidate = 1; + else + candidate = 3; + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->rf_paths > 1) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); +} + +static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) +{ + u32 val32; + u32 rf_amode, rf_bmode = 0, lstf; + + /* Check continuous TX and Packet TX */ + lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); + + if (lstf & OFDM_LSTF_MASK) { + /* Disable all continuous TX */ + val32 = lstf & ~OFDM_LSTF_MASK; + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); + + /* Read original RF mode Path A */ + rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC); + + /* Set RF mode to standby Path A */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, + (rf_amode & 0x8ffff) | 0x10000); + + /* Path-B */ + if (priv->tx_paths > 1) { + rf_bmode = rtl8xxxu_read_rfreg(priv, RF_B, + RF6052_REG_AC); + + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, + (rf_bmode & 0x8ffff) | 0x10000); + } + } else { + /* Deal with Packet TX case */ + /* block all queues */ + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + } + + /* Start LC calibration */ + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG); + val32 |= 0x08000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32); + + msleep(100); + + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0); + + /* Restore original parameters */ + if (lstf & OFDM_LSTF_MASK) { + /* Path-A */ + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode); + + /* Path-B */ + if (priv->tx_paths > 1) + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, + rf_bmode); + } else /* Deal with Packet TX case */ + rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); +} + +static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv) +{ + int i; + u16 reg; + + reg = REG_MACID; + + for (i = 0; i < ETH_ALEN; i++) + rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]); + + return 0; +} + +static int rtl8xxxu_set_bssid(struct rtl8xxxu_priv *priv, const u8 *bssid) +{ + int i; + u16 reg; + + dev_dbg(&priv->udev->dev, "%s: (%pM)\n", __func__, bssid); + + reg = REG_BSSID; + + for (i = 0; i < ETH_ALEN; i++) + rtl8xxxu_write8(priv, reg + i, bssid[i]); + + return 0; +} + +static void +rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor) +{ + u8 vals[4] = { 0x41, 0xa8, 0x72, 0xb9 }; + u8 max_agg = 0xf; + int i; + + ampdu_factor = 1 << (ampdu_factor + 2); + if (ampdu_factor > max_agg) + ampdu_factor = max_agg; + + for (i = 0; i < 4; i++) { + if ((vals[i] & 0xf0) > (ampdu_factor << 4)) + vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4); + + if ((vals[i] & 0x0f) > ampdu_factor) + vals[i] = (vals[i] & 0xf0) | ampdu_factor; + + rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]); + } +} + +static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density) +{ + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE); + val8 &= 0xf8; + val8 |= density; + rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8); +} + +static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + int count, ret = 0; + + /* Start of rtl8723AU_card_enable_flow */ + /* Act to Cardemu sequence*/ + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */ + val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); + val8 &= ~LEDCFG2_DPDT_SELECT; + rtl8xxxu_write8(priv, REG_LEDCFG2, val8); + + /* 0x0005[1] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + if ((val8 & BIT(1)) == 0) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", + __func__); + ret = -EBUSY; + goto exit; + } + + /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 |= SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 &= ~LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + +exit: + return ret; +} + +static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int count, ret = 0; + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /* Enable rising edge triggering interrupt */ + val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); + val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; + rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* 0x0005[1] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + if ((val8 & BIT(1)) == 0) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", + __func__); + ret = -EBUSY; + goto exit; + } + + /* Enable BT control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 &= ~AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 |= SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 &= ~LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + +exit: + return ret; +} + +static int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u8 val32; + int count, ret = 0; + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + /* + * Poll - wait for RX packet to complete + */ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, 0x5f8); + if (!val32) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, + "%s: RX poll timed out (0x05f8)\n", __func__); + ret = -EBUSY; + goto exit; + } + + /* Disable CCK and OFDM, clock gated */ + val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); + val8 &= ~SYS_FUNC_BBRSTB; + rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + + udelay(2); + + /* Reset baseband */ + val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); + val8 &= ~SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + + /* Reset MAC TRX */ + val8 = rtl8xxxu_read8(priv, REG_CR); + val8 = CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE; + rtl8xxxu_write8(priv, REG_CR, val8); + + /* Reset MAC TRX */ + val8 = rtl8xxxu_read8(priv, REG_CR + 1); + val8 &= ~BIT(1); /* CR_SECURITY_ENABLE */ + rtl8xxxu_write8(priv, REG_CR + 1, val8); + + /* Respond TX OK to scheduler */ + val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST); + val8 |= DUAL_TSF_TX_OK; + rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8); + +exit: + return ret; +} + +static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /* Clear suspend enable and power down enable*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(7)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); + + /* 0x04[12:11] = 11 enable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); +} + +static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /* Clear suspend enable and power down enable*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); +} + +static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* disable HWPDN 0x04[15]=0*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable SW LPS 0x04[10]= 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(2); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* release WLON reset 0x04[16]= 1*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + +exit: + return ret; +} + +static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* disable SW LPS 0x04[10]= 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(2); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* release WLON reset 0x04[16]= 1*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* disable HWPDN 0x04[15]= 0*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */ + /* + * Note: Vendor driver actually clears this bit, despite the + * documentation claims it's being set! + */ + val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); + val8 |= LEDCFG2_DPDT_SELECT; + val8 &= ~LEDCFG2_DPDT_SELECT; + rtl8xxxu_write8(priv, REG_LEDCFG2, val8); + +exit: + return ret; +} + +static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* Disable SW LPS 0x04[10]= 0 */ + val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_SW_LPS; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Wait until 0x04[17] = 1 power ready */ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable HWPDN 0x04[15]= 0*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_HW_POWERDOWN; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable WL suspend*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* Enable WL control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 |= AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* Enable falling edge triggering interrupt */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); + + /* Enable GPIO9 interrupt mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); + + /* Enable GPIO9 input mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); + + /* Enable HSISR GPIO[C:0] interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_HSIMR, val8); + + /* Enable HSISR GPIO9 interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); + + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); + val8 |= MULTI_WIFI_HW_ROF_EN; + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); + + /* For GPIO9 internal pull high setting BIT(14) */ + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); + val8 |= BIT(6); + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); + +exit: + return ret; +} + +static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /* 0x0007[7:0] = 0x20 SOP option to disable BG/MB */ + rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20); + + /* 0x04[12:11] = 01 enable WL suspend */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(4); + val8 |= BIT(3); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); + + return 0; +} + +static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + u32 val32; + int retry, retval; + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); + val32 |= RXPKT_NUM_RW_RELEASE_EN; + rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32); + + retry = 100; + retval = -EBUSY; + + do { + val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); + if (val32 & RXPKT_NUM_RXDMA_IDLE) { + retval = 0; + break; + } + } while (retry--); + + rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0); + rtl8xxxu_write32(priv, REG_RQPN, 0x80000000); + mdelay(2); + + if (!retry) + dev_warn(dev, "Failed to flush FIFO\n"); + + return retval; +} + +static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv) +{ + /* Fix USB interface interference issue */ + rtl8xxxu_write8(priv, 0xfe40, 0xe0); + rtl8xxxu_write8(priv, 0xfe41, 0x8d); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + /* + * This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits + * 8 and 5, for which I have found no documentation. + */ + rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320); + + /* + * Solve too many protocol error on USB bus. + * Can't do this for 8188/8192 UMC A cut parts + */ + if (!(!priv->chip_cut && priv->vendor_umc)) { + rtl8xxxu_write8(priv, 0xfe40, 0xe6); + rtl8xxxu_write8(priv, 0xfe41, 0x94); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe0); + rtl8xxxu_write8(priv, 0xfe41, 0x19); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe5); + rtl8xxxu_write8(priv, 0xfe41, 0x91); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe2); + rtl8xxxu_write8(priv, 0xfe41, 0x81); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + } +} + +static void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK); + val32 |= TXDMA_OFFSET_DROP_DATA_EN; + rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); +} + +static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + /* + * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register + */ + rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); + + rtl8723a_disabled_to_emu(priv); + + ret = rtl8723a_emu_to_active(priv); + if (ret) + goto exit; + + /* + * 0x0004[19] = 1, reset 8051 + */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(3); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* For EFuse PG */ + val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); + val32 &= ~(BIT(28) | BIT(29) | BIT(30)); + val32 |= (0x06 << 28); + rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32); +exit: + return ret; +} + +static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + rtl8723a_disabled_to_emu(priv); + + ret = rtl8723b_emu_to_active(priv); + if (ret) + goto exit; + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* + * BT coexist power on settings. This is identical for 1 and 2 + * antenna parts. + */ + rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + /* Antenna inverse */ + rtl8xxxu_write8(priv, 0xfe08, 0x01); + + val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); + val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write16(priv, REG_PWR_DATA, val16); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= LEDCFG0_DPDT_SELECT; + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +exit: + return ret; +} + +#ifdef CONFIG_RTL8XXXU_UNTESTED + +static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int i; + + for (i = 100; i; i--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + if (val8 & APS_FSMCO_PFM_ALDN) + break; + } + + if (!i) { + pr_info("%s: Poll failed\n", __func__); + return -ENODEV; + } + + /* + * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register + */ + rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); + rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b); + udelay(100); + + val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL); + if (!(val8 & LDOV12D_ENABLE)) { + pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8); + val8 |= LDOV12D_ENABLE; + rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8); + + udelay(100); + + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_MD2PP; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + } + + /* + * Auto enable WLAN + */ + val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); + val16 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); + + for (i = 1000; i; i--) { + val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); + if (!(val16 & APS_FSMCO_MAC_ENABLE)) + break; + } + if (!i) { + pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__); + return -EBUSY; + } + + /* + * Enable radio, GPIO, LED + */ + val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN | + APS_FSMCO_PFM_ALDN; + rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); + + /* + * Release RF digital isolation + */ + val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); + val16 &= ~SYS_ISO_DIOR; + rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); + + val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); + val8 &= ~APSD_CTRL_OFF; + rtl8xxxu_write8(priv, REG_APSD_CTRL, val8); + for (i = 200; i; i--) { + val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); + if (!(val8 & APSD_CTRL_OFF_STATUS)) + break; + } + + if (!i) { + pr_info("%s: APSD_CTRL poll failed\n", __func__); + return -EBUSY; + } + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE | + CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE; + rtl8xxxu_write16(priv, REG_CR, val16); + + rtl8xxxu_write8(priv, 0xfe10, 0x19); + + /* + * Workaround for 8188RU LNA power leakage problem. + */ + if (priv->rtl_chip == RTL8188R) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); + val32 &= ~BIT(1); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); + } + return 0; +} + +#endif + +/* + * This is needed for 8723bu as well, presumable + */ +static void rtl8192e_crystal_afe_adjust(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + + /* + * 40Mhz crystal source, MAC 0x28[2]=0 + */ + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + val8 &= 0xfb; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + + val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); + val32 &= 0xfffffc7f; + rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); + + /* + * 92e AFE parameter + * AFE PLL KVCO selection, MAC 0x28[6]=1 + */ + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + val8 &= 0xbf; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + + /* + * AFE PLL KVCO selection, MAC 0x78[21]=0 + */ + val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); + val32 &= 0xffdfffff; + rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); +} + +static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv) +{ + u16 val16; + u32 val32; + int ret; + + ret = 0; + + val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); + if (val32 & SYS_CFG_SPS_LDO_SEL) { + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3); + } else { + /* + * Raise 1.2V voltage + */ + val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL); + val32 &= 0xff0fffff; + val32 |= 0x00500000; + rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32); + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83); + } + + /* + * Adjust AFE before enabling PLL + */ + rtl8192e_crystal_afe_adjust(priv); + rtl8192e_disabled_to_emu(priv); + + ret = rtl8192e_emu_to_active(priv); + if (ret) + goto exit; + + rtl8xxxu_write16(priv, REG_CR, 0x0000); + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + +exit: + return ret; +} + +static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + + /* + * Workaround for 8188RU LNA power leakage problem. + */ + if (priv->rtl_chip == RTL8188R) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); + val32 |= BIT(1); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); + } + + rtl8xxxu_flush_fifo(priv); + + rtl8xxxu_active_to_lps(priv); + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8xxxu_active_to_emu(priv); + rtl8xxxu_emu_to_disabled(priv); + + /* Reset MCU IO Wrapper */ + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + /* RSV_CTRL 0x1C[7:0] = 0x0e lock ISO/CLK/Power control register */ + rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e); +} + +static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + rtl8xxxu_flush_fifo(priv); + + /* + * Disable TX report timer + */ + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + + rtl8xxxu_write8(priv, REG_CR, 0x0000); + + rtl8xxxu_active_to_lps(priv); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8723bu_active_to_emu(priv); + + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); +} + +#ifdef NEED_PS_TDMA +static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, + u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA; + h2c.b_type_dma.data1 = arg1; + h2c.b_type_dma.data2 = arg2; + h2c.b_type_dma.data3 = arg3; + h2c.b_type_dma.data4 = arg4; + h2c.b_type_dma.data5 = arg5; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); +} +#endif + +static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv) +{ + u32 val32; + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +} + +static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) +{ + struct h2c_cmd h2c; + u32 val32; + u8 val8; + + /* + * No indication anywhere as to what 0x0790 does. The 2 antenna + * vendor code preserves bits 6-7 here. + */ + rtl8xxxu_write8(priv, 0x0790, 0x05); + /* + * 0x0778 seems to be related to enabling the number of antennas + * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it + * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 + */ + rtl8xxxu_write8(priv, 0x0778, 0x01); + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); + + rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ + + /* + * Set BT grant to low + */ + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; + h2c.bt_grant.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + + /* + * BT select S0/S1 controlled by WiFi + */ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 |= BIT(5); + rtl8xxxu_write8(priv, 0x0067, val8); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + /* + * Bits 6/7 are marked in/out ... but for what? + */ + rtl8xxxu_write8(priv, 0x0974, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; + h2c.ant_sel_rsv.ant_inverse = 1; + h2c.ant_sel_rsv.int_switch_type = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); + + /* + * 0x280, 0x00, 0x200, 0x80 - not clear + */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* + * Software control, antenna at WiFi side + */ +#ifdef NEED_PS_TDMA + rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); +#endif + + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); + rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_info.cmd = H2C_8723B_BT_INFO; + h2c.bt_info.data = BIT(0); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; + h2c.ignore_wlan.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); +} + +static void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); + val32 &= ~(BIT(22) | BIT(23)); + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); +} + +static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) +{ + u32 agg_rx; + u8 agg_ctrl; + + /* + * For now simply disable RX aggregation + */ + agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); + agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; + + agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); + agg_rx &= ~RXDMA_USB_AGG_ENABLE; + agg_rx &= ~0xff0f; + + rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); + rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); +} + +static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + /* Time duration for NHM unit: 4us, 0x2710=40ms */ + rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); + rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); + rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); + rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); + /* TH8 */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 |= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + /* Enable CCK */ + val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); + val32 |= BIT(8) | BIT(9) | BIT(10); + rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); + /* Max power amongst all RX antennas */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); + val32 |= BIT(7); + rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); +} + +static void rtl8xxxu_old_init_queue_reserved_page(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + + if (priv->ep_tx_normal_queue) + val8 = TX_PAGE_NUM_NORM_PQ; + else + val8 = 0; + + rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); + + val32 = (TX_PAGE_NUM_PUBQ << RQPN_PUB_PQ_SHIFT) | RQPN_LOAD; + + if (priv->ep_tx_high_queue) + val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); + if (priv->ep_tx_low_queue) + val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); + + rtl8xxxu_write32(priv, REG_RQPN, val32); +} + +static void rtl8xxxu_init_queue_reserved_page(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_fileops *fops = priv->fops; + u32 hq, lq, nq, eq, pubq; + u32 val32; + + hq = 0; + lq = 0; + nq = 0; + eq = 0; + pubq = 0; + + if (priv->ep_tx_high_queue) + hq = fops->page_num_hi; + if (priv->ep_tx_low_queue) + lq = fops->page_num_lo; + if (priv->ep_tx_normal_queue) + nq = fops->page_num_norm; + + val32 = (nq << RQPN_NPQ_SHIFT) | (eq << RQPN_EPQ_SHIFT); + rtl8xxxu_write32(priv, REG_RQPN_NPQ, val32); + + pubq = fops->total_page_num - hq - lq - nq; + + val32 = RQPN_LOAD; + val32 |= (hq << RQPN_HI_PQ_SHIFT); + val32 |= (lq << RQPN_LO_PQ_SHIFT); + val32 |= (pubq << RQPN_PUB_PQ_SHIFT); + + rtl8xxxu_write32(priv, REG_RQPN, val32); +} + +static int rtl8xxxu_init_device(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + bool macpower; + int ret; + u8 val8; + u16 val16; + u32 val32; + + /* Check if MAC is already powered on */ + val8 = rtl8xxxu_read8(priv, REG_CR); + + /* + * Fix 92DU-VC S3 hang with the reason is that secondary mac is not + * initialized. First MAC returns 0xea, second MAC returns 0x00 + */ + if (val8 == 0xea) + macpower = false; + else + macpower = true; + + ret = priv->fops->power_on(priv); + if (ret < 0) { + dev_warn(dev, "%s: Failed power on\n", __func__); + goto exit; + } + + if (!macpower) { + if (priv->fops->total_page_num) + rtl8xxxu_init_queue_reserved_page(priv); + else + rtl8xxxu_old_init_queue_reserved_page(priv); + } + + ret = rtl8xxxu_init_queue_priority(priv); + dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); + if (ret) + goto exit; + + /* + * Set RX page boundary + */ + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary); + + ret = rtl8xxxu_download_firmware(priv); + dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret); + if (ret) + goto exit; + ret = rtl8xxxu_start_firmware(priv); + dev_dbg(dev, "%s: start_fiwmare %i\n", __func__, ret); + if (ret) + goto exit; + + if (priv->fops->phy_init_antenna_selection) + priv->fops->phy_init_antenna_selection(priv); + + ret = rtl8xxxu_init_mac(priv); + + dev_dbg(dev, "%s: init_mac %i\n", __func__, ret); + if (ret) + goto exit; + + ret = rtl8xxxu_init_phy_bb(priv); + dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret); + if (ret) + goto exit; + + ret = priv->fops->init_phy_rf(priv); + if (ret) + goto exit; + + /* RFSW Control - clear bit 14 ?? */ + if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) + rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); + + val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW | + FPGA0_RF_ANTSWB | + ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT); + if (!priv->no_pape) { + val32 |= (FPGA0_RF_PAPE | + (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + } + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + + /* 0x860[6:5]= 00 - why? - this sets antenna B */ + if (priv->rtl_chip != RTL8192E) + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210); + + if (!macpower) { + /* + * Set TX buffer boundary + */ + if (priv->rtl_chip == RTL8192E) + val8 = TX_TOTAL_PAGE_NUM_8192E + 1; + else + val8 = TX_TOTAL_PAGE_NUM + 1; + + if (priv->rtl_chip == RTL8723B) + val8 -= 1; + + rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); + rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); + rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8); + rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8); + rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8); + } + + /* + * The vendor drivers set PBP for all devices, except 8192e. + * There is no explanation for this in any of the sources. + */ + val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) | + (priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT); + if (priv->rtl_chip != RTL8192E) + rtl8xxxu_write8(priv, REG_PBP, val8); + + dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); + if (!macpower) { + ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); + if (ret) { + dev_warn(dev, "%s: LLT table init failed\n", __func__); + goto exit; + } + + /* + * Chip specific quirks + */ + priv->fops->usb_quirks(priv); + + /* + * Presumably this is for 8188EU as well + * Enable TX report and TX report timer + */ + if (priv->rtl_chip == RTL8723B) { + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 |= TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + /* Set MAX RPT MACID */ + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02); + /* TX report Timer. Unit: 32us */ + rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0); + + /* tmp ps ? */ + val8 = rtl8xxxu_read8(priv, 0xa3); + val8 &= 0xf8; + rtl8xxxu_write8(priv, 0xa3, val8); + } + } + + /* + * Unit in 8 bytes, not obvious what it is used for + */ + rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4); + + if (priv->rtl_chip == RTL8192E) { + rtl8xxxu_write32(priv, REG_HIMR0, 0x00); + rtl8xxxu_write32(priv, REG_HIMR1, 0x00); + } else { + /* + * Enable all interrupts - not obvious USB needs to do this + */ + rtl8xxxu_write32(priv, REG_HISR, 0xffffffff); + rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff); + } + + rtl8xxxu_set_mac(priv); + rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION); + + /* + * Configure initial WMAC settings + */ + val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST | + RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL | + RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; + rtl8xxxu_write32(priv, REG_RCR, val32); + + /* + * Accept all multicast + */ + rtl8xxxu_write32(priv, REG_MAR, 0xffffffff); + rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff); + + /* + * Init adaptive controls + */ + val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + val32 &= ~RESPONSE_RATE_BITMAP_ALL; + val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M; + rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); + + /* CCK = 0x0a, OFDM = 0x10 */ + rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10); + rtl8xxxu_set_retry(priv, 0x30, 0x30); + rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10); + + /* + * Init EDCA + */ + rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a); + + /* Set CCK SIFS */ + rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a); + + /* Set OFDM SIFS */ + rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a); + + /* TXOP */ + rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b); + rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f); + rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324); + rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226); + + /* Set data auto rate fallback retry count */ + rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000); + rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404); + rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201); + rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605); + + val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL); + val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY; + rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8); + + /* Set ACK timeout */ + rtl8xxxu_write8(priv, REG_ACKTO, 0x40); + + /* + * Initialize beacon parameters + */ + val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8); + rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16); + rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404); + rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME); + rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME); + rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F); + + /* + * Initialize burst parameters + */ + if (priv->rtl_chip == RTL8723B) { + /* + * For USB high speed set 512B packets + */ + val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B); + val8 &= ~(BIT(4) | BIT(5)); + val8 |= BIT(4); + val8 |= BIT(1) | BIT(2) | BIT(3); + rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8); + + /* + * For USB high speed set 512B packets + */ + val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B); + val8 |= BIT(7); + rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); + + rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); + rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e); + rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); + rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); + rtl8xxxu_write8(priv, REG_PIFS, 0x00); + rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50); + rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 |= BIT(5) | BIT(6); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + } + + if (priv->fops->init_aggregation) + priv->fops->init_aggregation(priv); + + /* + * Enable CCK and OFDM block + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM); + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + /* + * Invalidate all CAM entries - bit 30 is undocumented + */ + rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30)); + + /* + * Start out with default power levels for channel 6, 20MHz + */ + priv->fops->set_tx_power(priv, 1, false); + + /* Let the 8051 take control of antenna setting */ + if (priv->rtl_chip != RTL8192E) { + val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); + val8 |= LEDCFG2_DPDT_SELECT; + rtl8xxxu_write8(priv, REG_LEDCFG2, val8); + } + + rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff); + + /* Disable BAR - not sure if this has any effect on USB */ + rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff); + + rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); + + if (priv->fops->init_statistics) + priv->fops->init_statistics(priv); + + if (priv->rtl_chip == RTL8192E) { + /* + * 0x4c6[3] 1: RTS BW = Data BW + * 0: RTS BW depends on CCA / secondary CCA result. + */ + val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL); + val8 &= ~BIT(3); + rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8); + /* + * Reset USB mode switch setting + */ + rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00); + } + + rtl8723a_phy_lc_calibrate(priv); + + priv->fops->phy_iq_calibrate(priv); + + /* + * This should enable thermal meter + */ + if (priv->fops->tx_desc_size == sizeof(struct rtl8xxxu_txdesc40)) + rtl8xxxu_write_rfreg(priv, + RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); + else + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); + + /* Set NAV_UPPER to 30000us */ + val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT); + rtl8xxxu_write8(priv, REG_NAV_UPPER, val8); + + if (priv->rtl_chip == RTL8723A) { + /* + * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test, + * but we need to find root cause. + * This is 8723au only. + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + if ((val32 & 0xff000000) != 0x83000000) { + val32 |= FPGA_RF_MODE_CCK; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + } + } else if (priv->rtl_chip == RTL8192E) { + rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00); + } + + val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL); + val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK; + /* ack for xmit mgmt frames. */ + rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32); + + if (priv->rtl_chip == RTL8192E) { + /* + * Fix LDPC rx hang issue. + */ + val32 = rtl8xxxu_read32(priv, REG_AFE_MISC); + rtl8xxxu_write8(priv, REG_8192E_LDOV12_CTRL, 0x75); + val32 &= 0xfff00fff; + val32 |= 0x0007e000; + rtl8xxxu_write32(priv, REG_AFE_MISC, val32); + } +exit: + return ret; +} + +static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv, + struct ieee80211_key_conf *key, const u8 *mac) +{ + u32 cmd, val32, addr, ctrl; + int j, i, tmp_debug; + + tmp_debug = rtl8xxxu_debug; + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_KEY) + rtl8xxxu_debug |= RTL8XXXU_DEBUG_REG_WRITE; + + /* + * This is a bit of a hack - the lower bits of the cipher + * suite selector happens to match the cipher index in the CAM + */ + addr = key->keyidx << CAM_CMD_KEY_SHIFT; + ctrl = (key->cipher & 0x0f) << 2 | key->keyidx | CAM_WRITE_VALID; + + for (j = 5; j >= 0; j--) { + switch (j) { + case 0: + val32 = ctrl | (mac[0] << 16) | (mac[1] << 24); + break; + case 1: + val32 = mac[2] | (mac[3] << 8) | + (mac[4] << 16) | (mac[5] << 24); + break; + default: + i = (j - 2) << 2; + val32 = key->key[i] | (key->key[i + 1] << 8) | + key->key[i + 2] << 16 | key->key[i + 3] << 24; + break; + } + + rtl8xxxu_write32(priv, REG_CAM_WRITE, val32); + cmd = CAM_CMD_POLLING | CAM_CMD_WRITE | (addr + j); + rtl8xxxu_write32(priv, REG_CAM_CMD, cmd); + udelay(100); + } + + rtl8xxxu_debug = tmp_debug; +} + +static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, const u8 *mac) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); + val8 |= BEACON_DISABLE_TSF_UPDATE; + rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); +} + +static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); + val8 &= ~BEACON_DISABLE_TSF_UPDATE; + rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); +} + +static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.ramask.cmd = H2C_SET_RATE_MASK; + h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff); + h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16); + + h2c.ramask.arg = 0x80; + if (sgi) + h2c.ramask.arg |= 0x20; + + dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", + __func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask)); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); +} + +static void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi) +{ + struct h2c_cmd h2c; + u8 bw = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID; + h2c.b_macid_cfg.ramask0 = ramask & 0xff; + h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff; + h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff; + h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff; + + h2c.ramask.arg = 0x80; + h2c.b_macid_cfg.data1 = 0; + if (sgi) + h2c.b_macid_cfg.data1 |= BIT(7); + + h2c.b_macid_cfg.data2 = bw; + + dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", + __func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg)); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); +} + +static void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT; + + if (connect) + h2c.joinbss.data = H2C_JOIN_BSS_CONNECT; + else + h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); +} + +static void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT; + if (connect) + h2c.media_status_rpt.parm |= BIT(0); + else + h2c.media_status_rpt.parm &= ~BIT(0); + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); +} + +static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg) +{ + u32 val32; + u8 rate_idx = 0; + + rate_cfg &= RESPONSE_RATE_BITMAP_ALL; + + val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + val32 &= ~RESPONSE_RATE_BITMAP_ALL; + val32 |= rate_cfg; + rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); + + dev_dbg(&priv->udev->dev, "%s: rates %08x\n", __func__, rate_cfg); + + while (rate_cfg) { + rate_cfg = (rate_cfg >> 1); + rate_idx++; + } + rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx); +} + +static void +rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, u32 changed) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + struct ieee80211_sta *sta; + u32 val32; + u8 val8; + + if (changed & BSS_CHANGED_ASSOC) { + dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc); + + rtl8xxxu_set_linktype(priv, vif->type); + + if (bss_conf->assoc) { + u32 ramask; + int sgi = 0; + + rcu_read_lock(); + sta = ieee80211_find_sta(vif, bss_conf->bssid); + if (!sta) { + dev_info(dev, "%s: ASSOC no sta found\n", + __func__); + rcu_read_unlock(); + goto error; + } + + if (sta->ht_cap.ht_supported) + dev_info(dev, "%s: HT supported\n", __func__); + if (sta->vht_cap.vht_supported) + dev_info(dev, "%s: VHT supported\n", __func__); + + /* TODO: Set bits 28-31 for rate adaptive id */ + ramask = (sta->supp_rates[0] & 0xfff) | + sta->ht_cap.mcs.rx_mask[0] << 12 | + sta->ht_cap.mcs.rx_mask[1] << 20; + if (sta->ht_cap.cap & + (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)) + sgi = 1; + rcu_read_unlock(); + + priv->fops->update_rate_mask(priv, ramask, sgi); + + rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); + + rtl8723a_stop_tx_beacon(priv); + + /* joinbss sequence */ + rtl8xxxu_write16(priv, REG_BCN_PSR_RPT, + 0xc000 | bss_conf->aid); + + priv->fops->report_connect(priv, 0, true); + } else { + val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); + val8 |= BEACON_DISABLE_TSF_UPDATE; + rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); + + priv->fops->report_connect(priv, 0, false); + } + } + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + dev_dbg(dev, "Changed ERP_PREAMBLE: Use short preamble %i\n", + bss_conf->use_short_preamble); + val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + if (bss_conf->use_short_preamble) + val32 |= RSR_ACK_SHORT_PREAMBLE; + else + val32 &= ~RSR_ACK_SHORT_PREAMBLE; + rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + dev_dbg(dev, "Changed ERP_SLOT: short_slot_time %i\n", + bss_conf->use_short_slot); + + if (bss_conf->use_short_slot) + val8 = 9; + else + val8 = 20; + rtl8xxxu_write8(priv, REG_SLOT, val8); + } + + if (changed & BSS_CHANGED_BSSID) { + dev_dbg(dev, "Changed BSSID!\n"); + rtl8xxxu_set_bssid(priv, bss_conf->bssid); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + dev_dbg(dev, "Changed BASIC_RATES!\n"); + rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates); + } +error: + return; +} + +static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue) +{ + u32 rtlqueue; + + switch (queue) { + case IEEE80211_AC_VO: + rtlqueue = TXDESC_QUEUE_VO; + break; + case IEEE80211_AC_VI: + rtlqueue = TXDESC_QUEUE_VI; + break; + case IEEE80211_AC_BE: + rtlqueue = TXDESC_QUEUE_BE; + break; + case IEEE80211_AC_BK: + rtlqueue = TXDESC_QUEUE_BK; + break; + default: + rtlqueue = TXDESC_QUEUE_BE; + } + + return rtlqueue; +} + +static u32 rtl8xxxu_queue_select(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + u32 queue; + + if (ieee80211_is_mgmt(hdr->frame_control)) + queue = TXDESC_QUEUE_MGNT; + else + queue = rtl8xxxu_80211_to_rtl_queue(skb_get_queue_mapping(skb)); + + return queue; +} + +/* + * Despite newer chips 8723b/8812/8821 having a larger TX descriptor + * format. The descriptor checksum is still only calculated over the + * initial 32 bytes of the descriptor! + */ +static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_txdesc32 *tx_desc) +{ + __le16 *ptr = (__le16 *)tx_desc; + u16 csum = 0; + int i; + + /* + * Clear csum field before calculation, as the csum field is + * in the middle of the struct. + */ + tx_desc->csum = cpu_to_le16(0); + + for (i = 0; i < (sizeof(struct rtl8xxxu_txdesc32) / sizeof(u16)); i++) + csum = csum ^ le16_to_cpu(ptr[i]); + + tx_desc->csum |= cpu_to_le16(csum); +} + +static void rtl8xxxu_free_tx_resources(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_tx_urb *tx_urb, *tmp; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_urb_lock, flags); + list_for_each_entry_safe(tx_urb, tmp, &priv->tx_urb_free_list, list) { + list_del(&tx_urb->list); + priv->tx_urb_free_count--; + usb_free_urb(&tx_urb->urb); + } + spin_unlock_irqrestore(&priv->tx_urb_lock, flags); +} + +static struct rtl8xxxu_tx_urb * +rtl8xxxu_alloc_tx_urb(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_tx_urb *tx_urb; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_urb_lock, flags); + tx_urb = list_first_entry_or_null(&priv->tx_urb_free_list, + struct rtl8xxxu_tx_urb, list); + if (tx_urb) { + list_del(&tx_urb->list); + priv->tx_urb_free_count--; + if (priv->tx_urb_free_count < RTL8XXXU_TX_URB_LOW_WATER && + !priv->tx_stopped) { + priv->tx_stopped = true; + ieee80211_stop_queues(priv->hw); + } + } + + spin_unlock_irqrestore(&priv->tx_urb_lock, flags); + + return tx_urb; +} + +static void rtl8xxxu_free_tx_urb(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_tx_urb *tx_urb) +{ + unsigned long flags; + + INIT_LIST_HEAD(&tx_urb->list); + + spin_lock_irqsave(&priv->tx_urb_lock, flags); + + list_add(&tx_urb->list, &priv->tx_urb_free_list); + priv->tx_urb_free_count++; + if (priv->tx_urb_free_count > RTL8XXXU_TX_URB_HIGH_WATER && + priv->tx_stopped) { + priv->tx_stopped = false; + ieee80211_wake_queues(priv->hw); + } + + spin_unlock_irqrestore(&priv->tx_urb_lock, flags); +} + +static void rtl8xxxu_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *)urb->context; + struct ieee80211_tx_info *tx_info; + struct ieee80211_hw *hw; + struct rtl8xxxu_priv *priv; + struct rtl8xxxu_tx_urb *tx_urb = + container_of(urb, struct rtl8xxxu_tx_urb, urb); + + tx_info = IEEE80211_SKB_CB(skb); + hw = tx_info->rate_driver_data[0]; + priv = hw->priv; + + skb_pull(skb, priv->fops->tx_desc_size); + + ieee80211_tx_info_clear_status(tx_info); + tx_info->status.rates[0].idx = -1; + tx_info->status.rates[0].count = 0; + + if (!urb->status) + tx_info->flags |= IEEE80211_TX_STAT_ACK; + + ieee80211_tx_status_irqsafe(hw, skb); + + rtl8xxxu_free_tx_urb(priv, tx_urb); +} + +static void rtl8xxxu_dump_action(struct device *dev, + struct ieee80211_hdr *hdr) +{ + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)hdr; + u16 cap, timeout; + + if (!(rtl8xxxu_debug & RTL8XXXU_DEBUG_ACTION)) + return; + + switch (mgmt->u.action.u.addba_resp.action_code) { + case WLAN_ACTION_ADDBA_RESP: + cap = le16_to_cpu(mgmt->u.action.u.addba_resp.capab); + timeout = le16_to_cpu(mgmt->u.action.u.addba_resp.timeout); + dev_info(dev, "WLAN_ACTION_ADDBA_RESP: " + "timeout %i, tid %02x, buf_size %02x, policy %02x, " + "status %02x\n", + timeout, + (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2, + (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6, + (cap >> 1) & 0x1, + le16_to_cpu(mgmt->u.action.u.addba_resp.status)); + break; + case WLAN_ACTION_ADDBA_REQ: + cap = le16_to_cpu(mgmt->u.action.u.addba_req.capab); + timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout); + dev_info(dev, "WLAN_ACTION_ADDBA_REQ: " + "timeout %i, tid %02x, buf_size %02x, policy %02x\n", + timeout, + (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2, + (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6, + (cap >> 1) & 0x1); + break; + default: + dev_info(dev, "action frame %02x\n", + mgmt->u.action.u.addba_resp.action_code); + break; + } +} + +static void rtl8xxxu_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info); + struct rtl8xxxu_priv *priv = hw->priv; + struct rtl8xxxu_txdesc32 *tx_desc; + struct rtl8xxxu_txdesc40 *tx_desc40; + struct rtl8xxxu_tx_urb *tx_urb; + struct ieee80211_sta *sta = NULL; + struct ieee80211_vif *vif = tx_info->control.vif; + struct device *dev = &priv->udev->dev; + u32 queue, rate; + u16 pktlen = skb->len; + u16 seq_number; + u16 rate_flag = tx_info->control.rates[0].flags; + int tx_desc_size = priv->fops->tx_desc_size; + int ret; + bool usedesc40, ampdu_enable; + + if (skb_headroom(skb) < tx_desc_size) { + dev_warn(dev, + "%s: Not enough headroom (%i) for tx descriptor\n", + __func__, skb_headroom(skb)); + goto error; + } + + if (unlikely(skb->len > (65535 - tx_desc_size))) { + dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n", + __func__, skb->len); + goto error; + } + + tx_urb = rtl8xxxu_alloc_tx_urb(priv); + if (!tx_urb) { + dev_warn(dev, "%s: Unable to allocate tx urb\n", __func__); + goto error; + } + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX) + dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n", + __func__, tx_rate->bitrate, tx_rate->hw_value, pktlen); + + if (ieee80211_is_action(hdr->frame_control)) + rtl8xxxu_dump_action(dev, hdr); + + usedesc40 = (tx_desc_size == 40); + tx_info->rate_driver_data[0] = hw; + + if (control && control->sta) + sta = control->sta; + + tx_desc = (struct rtl8xxxu_txdesc32 *)skb_push(skb, tx_desc_size); + + memset(tx_desc, 0, tx_desc_size); + tx_desc->pkt_size = cpu_to_le16(pktlen); + tx_desc->pkt_offset = tx_desc_size; + + tx_desc->txdw0 = + TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT; + if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) || + is_broadcast_ether_addr(ieee80211_get_DA(hdr))) + tx_desc->txdw0 |= TXDESC_BROADMULTICAST; + + queue = rtl8xxxu_queue_select(hw, skb); + tx_desc->txdw1 = cpu_to_le32(queue << TXDESC_QUEUE_SHIFT); + + if (tx_info->control.hw_key) { + switch (tx_info->control.hw_key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: + tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_RC4); + break; + case WLAN_CIPHER_SUITE_CCMP: + tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_AES); + break; + default: + break; + } + } + + /* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */ + ampdu_enable = false; + if (ieee80211_is_data_qos(hdr->frame_control) && sta) { + if (sta->ht_cap.ht_supported) { + u32 ampdu, val32; + + ampdu = (u32)sta->ht_cap.ampdu_density; + val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT; + tx_desc->txdw2 |= cpu_to_le32(val32); + + ampdu_enable = true; + } + } + + if (rate_flag & IEEE80211_TX_RC_MCS) + rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0; + else + rate = tx_rate->hw_value; + + seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)); + if (!usedesc40) { + tx_desc->txdw5 = cpu_to_le32(rate); + + if (ieee80211_is_data(hdr->frame_control)) + tx_desc->txdw5 |= cpu_to_le32(0x0001ff00); + + tx_desc->txdw3 = + cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT); + + if (ampdu_enable) + tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE); + else + tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK); + + if (ieee80211_is_mgmt(hdr->frame_control)) { + tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value); + tx_desc->txdw4 |= + cpu_to_le32(TXDESC32_USE_DRIVER_RATE); + tx_desc->txdw5 |= + cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT); + tx_desc->txdw5 |= + cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE); + } + + if (ieee80211_is_data_qos(hdr->frame_control)) + tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS); + + if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || + (sta && vif && vif->bss_conf.use_short_preamble)) + tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE); + + if (rate_flag & IEEE80211_TX_RC_SHORT_GI || + (ieee80211_is_data_qos(hdr->frame_control) && + sta && sta->ht_cap.cap & + (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) { + tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI); + } + + if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { + /* + * Use RTS rate 24M - does the mac80211 tell + * us which to use? + */ + tx_desc->txdw4 |= + cpu_to_le32(DESC_RATE_24M << + TXDESC32_RTS_RATE_SHIFT); + tx_desc->txdw4 |= + cpu_to_le32(TXDESC32_RTS_CTS_ENABLE); + tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE); + } + } else { + tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc; + + tx_desc40->txdw4 = cpu_to_le32(rate); + if (ieee80211_is_data(hdr->frame_control)) { + tx_desc->txdw4 |= + cpu_to_le32(0x1f << + TXDESC40_DATA_RATE_FB_SHIFT); + } + + tx_desc40->txdw9 = + cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT); + + if (ampdu_enable) + tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE); + else + tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK); + + if (ieee80211_is_mgmt(hdr->frame_control)) { + tx_desc40->txdw4 = cpu_to_le32(tx_rate->hw_value); + tx_desc40->txdw3 |= + cpu_to_le32(TXDESC40_USE_DRIVER_RATE); + tx_desc40->txdw4 |= + cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT); + tx_desc40->txdw4 |= + cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE); + } + + if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || + (sta && vif && vif->bss_conf.use_short_preamble)) + tx_desc40->txdw5 |= + cpu_to_le32(TXDESC40_SHORT_PREAMBLE); + + if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { + /* + * Use RTS rate 24M - does the mac80211 tell + * us which to use? + */ + tx_desc->txdw4 |= + cpu_to_le32(DESC_RATE_24M << + TXDESC40_RTS_RATE_SHIFT); + tx_desc->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE); + tx_desc->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE); + } + } + + rtl8xxxu_calc_tx_desc_csum(tx_desc); + + usb_fill_bulk_urb(&tx_urb->urb, priv->udev, priv->pipe_out[queue], + skb->data, skb->len, rtl8xxxu_tx_complete, skb); + + usb_anchor_urb(&tx_urb->urb, &priv->tx_anchor); + ret = usb_submit_urb(&tx_urb->urb, GFP_ATOMIC); + if (ret) { + usb_unanchor_urb(&tx_urb->urb); + rtl8xxxu_free_tx_urb(priv, tx_urb); + goto error; + } + return; +error: + dev_kfree_skb(skb); +} + +static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv, + struct ieee80211_rx_status *rx_status, + struct rtl8723au_phy_stats *phy_stats, + u32 rxmcs) +{ + if (phy_stats->sgi_en) + rx_status->flag |= RX_FLAG_SHORT_GI; + + if (rxmcs < DESC_RATE_6M) { + /* + * Handle PHY stats for CCK rates + */ + u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a; + + switch (cck_agc_rpt & 0xc0) { + case 0xc0: + rx_status->signal = -46 - (cck_agc_rpt & 0x3e); + break; + case 0x80: + rx_status->signal = -26 - (cck_agc_rpt & 0x3e); + break; + case 0x40: + rx_status->signal = -12 - (cck_agc_rpt & 0x3e); + break; + case 0x00: + rx_status->signal = 16 - (cck_agc_rpt & 0x3e); + break; + } + } else { + rx_status->signal = + (phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110; + } +} + +static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_rx_urb *rx_urb, *tmp; + unsigned long flags; + + spin_lock_irqsave(&priv->rx_urb_lock, flags); + + list_for_each_entry_safe(rx_urb, tmp, + &priv->rx_urb_pending_list, list) { + list_del(&rx_urb->list); + priv->rx_urb_pending_count--; + usb_free_urb(&rx_urb->urb); + } + + spin_unlock_irqrestore(&priv->rx_urb_lock, flags); +} + +static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rx_urb *rx_urb) +{ + struct sk_buff *skb; + unsigned long flags; + int pending = 0; + + spin_lock_irqsave(&priv->rx_urb_lock, flags); + + if (!priv->shutdown) { + list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list); + priv->rx_urb_pending_count++; + pending = priv->rx_urb_pending_count; + } else { + skb = (struct sk_buff *)rx_urb->urb.context; + dev_kfree_skb(skb); + usb_free_urb(&rx_urb->urb); + } + + spin_unlock_irqrestore(&priv->rx_urb_lock, flags); + + if (pending > RTL8XXXU_RX_URB_PENDING_WATER) + schedule_work(&priv->rx_urb_wq); +} + +static void rtl8xxxu_rx_urb_work(struct work_struct *work) +{ + struct rtl8xxxu_priv *priv; + struct rtl8xxxu_rx_urb *rx_urb, *tmp; + struct list_head local; + struct sk_buff *skb; + unsigned long flags; + int ret; + + priv = container_of(work, struct rtl8xxxu_priv, rx_urb_wq); + INIT_LIST_HEAD(&local); + + spin_lock_irqsave(&priv->rx_urb_lock, flags); + + list_splice_init(&priv->rx_urb_pending_list, &local); + priv->rx_urb_pending_count = 0; + + spin_unlock_irqrestore(&priv->rx_urb_lock, flags); + + list_for_each_entry_safe(rx_urb, tmp, &local, list) { + list_del_init(&rx_urb->list); + ret = rtl8xxxu_submit_rx_urb(priv, rx_urb); + /* + * If out of memory or temporary error, put it back on the + * queue and try again. Otherwise the device is dead/gone + * and we should drop it. + */ + switch (ret) { + case 0: + break; + case -ENOMEM: + case -EAGAIN: + rtl8xxxu_queue_rx_urb(priv, rx_urb); + break; + default: + pr_info("failed to requeue urb %i\n", ret); + skb = (struct sk_buff *)rx_urb->urb.context; + dev_kfree_skb(skb); + usb_free_urb(&rx_urb->urb); + } + } +} + +static int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, + struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) +{ + struct rtl8xxxu_rxdesc16 *rx_desc = + (struct rtl8xxxu_rxdesc16 *)skb->data; + struct rtl8723au_phy_stats *phy_stats; + __le32 *_rx_desc_le = (__le32 *)skb->data; + u32 *_rx_desc = (u32 *)skb->data; + int drvinfo_sz, desc_shift; + int i; + + for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++) + _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]); + + skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16)); + + phy_stats = (struct rtl8723au_phy_stats *)skb->data; + + drvinfo_sz = rx_desc->drvinfo_sz * 8; + desc_shift = rx_desc->shift; + skb_pull(skb, drvinfo_sz + desc_shift); + + if (rx_desc->phy_stats) + rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, + rx_desc->rxmcs); + + rx_status->mactime = le32_to_cpu(rx_desc->tsfl); + rx_status->flag |= RX_FLAG_MACTIME_START; + + if (!rx_desc->swdec) + rx_status->flag |= RX_FLAG_DECRYPTED; + if (rx_desc->crc32) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (rx_desc->bw) + rx_status->flag |= RX_FLAG_40MHZ; + + if (rx_desc->rxht) { + rx_status->flag |= RX_FLAG_HT; + rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; + } else { + rx_status->rate_idx = rx_desc->rxmcs; + } + + return RX_TYPE_DATA_PKT; +} + +static int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, + struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) +{ + struct rtl8xxxu_rxdesc24 *rx_desc = + (struct rtl8xxxu_rxdesc24 *)skb->data; + struct rtl8723au_phy_stats *phy_stats; + __le32 *_rx_desc_le = (__le32 *)skb->data; + u32 *_rx_desc = (u32 *)skb->data; + int drvinfo_sz, desc_shift; + int i; + + for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc24) / sizeof(u32)); i++) + _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]); + + skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc24)); + + phy_stats = (struct rtl8723au_phy_stats *)skb->data; + + drvinfo_sz = rx_desc->drvinfo_sz * 8; + desc_shift = rx_desc->shift; + skb_pull(skb, drvinfo_sz + desc_shift); + + if (rx_desc->rpt_sel) { + struct device *dev = &priv->udev->dev; + dev_dbg(dev, "%s: C2H packet\n", __func__); + return RX_TYPE_C2H; + } + + if (rx_desc->phy_stats) + rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, + rx_desc->rxmcs); + + rx_status->mactime = le32_to_cpu(rx_desc->tsfl); + rx_status->flag |= RX_FLAG_MACTIME_START; + + if (!rx_desc->swdec) + rx_status->flag |= RX_FLAG_DECRYPTED; + if (rx_desc->crc32) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (rx_desc->bw) + rx_status->flag |= RX_FLAG_40MHZ; + + if (rx_desc->rxmcs >= DESC_RATE_MCS0) { + rx_status->flag |= RX_FLAG_HT; + rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; + } else { + rx_status->rate_idx = rx_desc->rxmcs; + } + + return RX_TYPE_DATA_PKT; +} + +static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv, + struct sk_buff *skb) +{ + struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data; + struct device *dev = &priv->udev->dev; + int len; + + len = skb->len - 2; + + dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n", + c2h->id, c2h->seq, len, c2h->bt_info.response_source); + + switch(c2h->id) { + case C2H_8723B_BT_INFO: + if (c2h->bt_info.response_source > + BT_INFO_SRC_8723B_BT_ACTIVE_SEND) + dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n"); + else + dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n"); + + if (c2h->bt_info.bt_has_reset) + dev_dbg(dev, "BT has been reset\n"); + if (c2h->bt_info.tx_rx_mask) + dev_dbg(dev, "BT TRx mask\n"); + + break; + case C2H_8723B_BT_MP_INFO: + dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n", + c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status); + break; + case C2H_8723B_RA_REPORT: + dev_dbg(dev, + "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n", + c2h->ra_report.rate, c2h->ra_report.dummy0_0, + c2h->ra_report.macid, c2h->ra_report.noisy_state); + break; + default: + dev_info(dev, "Unhandled C2H event %02x seq %02x\n", + c2h->id, c2h->seq); + print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE, + 16, 1, c2h->raw.payload, len, false); + break; + } +} + +static void rtl8xxxu_rx_complete(struct urb *urb) +{ + struct rtl8xxxu_rx_urb *rx_urb = + container_of(urb, struct rtl8xxxu_rx_urb, urb); + struct ieee80211_hw *hw = rx_urb->hw; + struct rtl8xxxu_priv *priv = hw->priv; + struct sk_buff *skb = (struct sk_buff *)urb->context; + struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); + struct device *dev = &priv->udev->dev; + int rx_type; + + skb_put(skb, urb->actual_length); + + if (urb->status == 0) { + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + + rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status); + + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; + + if (rx_type == RX_TYPE_DATA_PKT) + ieee80211_rx_irqsafe(hw, skb); + else { + rtl8723bu_handle_c2h(priv, skb); + dev_kfree_skb(skb); + } + + skb = NULL; + rx_urb->urb.context = NULL; + rtl8xxxu_queue_rx_urb(priv, rx_urb); + } else { + dev_dbg(dev, "%s: status %i\n", __func__, urb->status); + goto cleanup; + } + return; + +cleanup: + usb_free_urb(urb); + dev_kfree_skb(skb); + return; +} + +static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rx_urb *rx_urb) +{ + struct sk_buff *skb; + int skb_size; + int ret, rx_desc_sz; + + rx_desc_sz = priv->fops->rx_desc_size; + skb_size = rx_desc_sz + RTL_RX_BUFFER_SIZE; + skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + memset(skb->data, 0, rx_desc_sz); + usb_fill_bulk_urb(&rx_urb->urb, priv->udev, priv->pipe_in, skb->data, + skb_size, rtl8xxxu_rx_complete, skb); + usb_anchor_urb(&rx_urb->urb, &priv->rx_anchor); + ret = usb_submit_urb(&rx_urb->urb, GFP_ATOMIC); + if (ret) + usb_unanchor_urb(&rx_urb->urb); + return ret; +} + +static void rtl8xxxu_int_complete(struct urb *urb) +{ + struct rtl8xxxu_priv *priv = (struct rtl8xxxu_priv *)urb->context; + struct device *dev = &priv->udev->dev; + int ret; + + dev_dbg(dev, "%s: status %i\n", __func__, urb->status); + if (urb->status == 0) { + usb_anchor_urb(urb, &priv->int_anchor); + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) + usb_unanchor_urb(urb); + } else { + dev_info(dev, "%s: Error %i\n", __func__, urb->status); + } +} + + +static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct urb *urb; + u32 val32; + int ret; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + usb_fill_int_urb(urb, priv->udev, priv->pipe_interrupt, + priv->int_buf, USB_INTR_CONTENT_LENGTH, + rtl8xxxu_int_complete, priv, 1); + usb_anchor_urb(urb, &priv->int_anchor); + ret = usb_submit_urb(urb, GFP_KERNEL); + if (ret) { + usb_unanchor_urb(urb); + goto error; + } + + val32 = rtl8xxxu_read32(priv, REG_USB_HIMR); + val32 |= USB_HIMR_CPWM; + rtl8xxxu_write32(priv, REG_USB_HIMR, val32); + +error: + return ret; +} + +static int rtl8xxxu_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rtl8xxxu_priv *priv = hw->priv; + int ret; + u8 val8; + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + rtl8723a_stop_tx_beacon(priv); + + val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); + val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE | + BEACON_DISABLE_TSF_UPDATE; + rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); + ret = 0; + break; + default: + ret = -EOPNOTSUPP; + } + + rtl8xxxu_set_linktype(priv, vif->type); + + return ret; +} + +static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rtl8xxxu_priv *priv = hw->priv; + + dev_dbg(&priv->udev->dev, "%s\n", __func__); +} + +static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + u16 val16; + int ret = 0, channel; + bool ht40; + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL) + dev_info(dev, + "%s: channel: %i (changed %08x chandef.width %02x)\n", + __func__, hw->conf.chandef.chan->hw_value, + changed, hw->conf.chandef.width); + + if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { + val16 = ((hw->conf.long_frame_max_tx_count << + RETRY_LIMIT_LONG_SHIFT) & RETRY_LIMIT_LONG_MASK) | + ((hw->conf.short_frame_max_tx_count << + RETRY_LIMIT_SHORT_SHIFT) & RETRY_LIMIT_SHORT_MASK); + rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16); + } + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + switch (hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + ht40 = false; + break; + case NL80211_CHAN_WIDTH_40: + ht40 = true; + break; + default: + ret = -ENOTSUPP; + goto exit; + } + + channel = hw->conf.chandef.chan->hw_value; + + priv->fops->set_tx_power(priv, channel, ht40); + + priv->fops->config_channel(hw); + } + +exit: + return ret; +} + +static int rtl8xxxu_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *param) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + u32 val32; + u8 aifs, acm_ctrl, acm_bit; + + aifs = param->aifs; + + val32 = aifs | + fls(param->cw_min) << EDCA_PARAM_ECW_MIN_SHIFT | + fls(param->cw_max) << EDCA_PARAM_ECW_MAX_SHIFT | + (u32)param->txop << EDCA_PARAM_TXOP_SHIFT; + + acm_ctrl = rtl8xxxu_read8(priv, REG_ACM_HW_CTRL); + dev_dbg(dev, + "%s: IEEE80211 queue %02x val %08x, acm %i, acm_ctrl %02x\n", + __func__, queue, val32, param->acm, acm_ctrl); + + switch (queue) { + case IEEE80211_AC_VO: + acm_bit = ACM_HW_CTRL_VO; + rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, val32); + break; + case IEEE80211_AC_VI: + acm_bit = ACM_HW_CTRL_VI; + rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, val32); + break; + case IEEE80211_AC_BE: + acm_bit = ACM_HW_CTRL_BE; + rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, val32); + break; + case IEEE80211_AC_BK: + acm_bit = ACM_HW_CTRL_BK; + rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, val32); + break; + default: + acm_bit = 0; + break; + } + + if (param->acm) + acm_ctrl |= acm_bit; + else + acm_ctrl &= ~acm_bit; + rtl8xxxu_write8(priv, REG_ACM_HW_CTRL, acm_ctrl); + + return 0; +} + +static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, u64 multicast) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u32 rcr = rtl8xxxu_read32(priv, REG_RCR); + + dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n", + __func__, changed_flags, *total_flags); + + /* + * FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR) + */ + + if (*total_flags & FIF_FCSFAIL) + rcr |= RCR_ACCEPT_CRC32; + else + rcr &= ~RCR_ACCEPT_CRC32; + + /* + * FIF_PLCPFAIL not supported? + */ + + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + rcr &= ~RCR_CHECK_BSSID_BEACON; + else + rcr |= RCR_CHECK_BSSID_BEACON; + + if (*total_flags & FIF_CONTROL) + rcr |= RCR_ACCEPT_CTRL_FRAME; + else + rcr &= ~RCR_ACCEPT_CTRL_FRAME; + + if (*total_flags & FIF_OTHER_BSS) { + rcr |= RCR_ACCEPT_AP; + rcr &= ~RCR_CHECK_BSSID_MATCH; + } else { + rcr &= ~RCR_ACCEPT_AP; + rcr |= RCR_CHECK_BSSID_MATCH; + } + + if (*total_flags & FIF_PSPOLL) + rcr |= RCR_ACCEPT_PM; + else + rcr &= ~RCR_ACCEPT_PM; + + /* + * FIF_PROBE_REQ ignored as probe requests always seem to be accepted + */ + + rtl8xxxu_write32(priv, REG_RCR, rcr); + + *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC | + FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL | + FIF_PROBE_REQ); +} + +static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts) +{ + if (rts > 2347) + return -EINVAL; + + return 0; +} + +static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + u8 mac_addr[ETH_ALEN]; + u8 val8; + u16 val16; + u32 val32; + int retval = -EOPNOTSUPP; + + dev_dbg(dev, "%s: cmd %02x, cipher %08x, index %i\n", + __func__, cmd, key->cipher, key->keyidx); + + if (vif->type != NL80211_IFTYPE_STATION) + return -EOPNOTSUPP; + + if (key->keyidx > 3) + return -EOPNOTSUPP; + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + + break; + case WLAN_CIPHER_SUITE_CCMP: + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; + break; + case WLAN_CIPHER_SUITE_TKIP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + default: + return -EOPNOTSUPP; + } + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { + dev_dbg(dev, "%s: pairwise key\n", __func__); + ether_addr_copy(mac_addr, sta->addr); + } else { + dev_dbg(dev, "%s: group key\n", __func__); + eth_broadcast_addr(mac_addr); + } + + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= CR_SECURITY_ENABLE; + rtl8xxxu_write16(priv, REG_CR, val16); + + val8 = SEC_CFG_TX_SEC_ENABLE | SEC_CFG_TXBC_USE_DEFKEY | + SEC_CFG_RX_SEC_ENABLE | SEC_CFG_RXBC_USE_DEFKEY; + val8 |= SEC_CFG_TX_USE_DEFKEY | SEC_CFG_RX_USE_DEFKEY; + rtl8xxxu_write8(priv, REG_SECURITY_CFG, val8); + + switch (cmd) { + case SET_KEY: + key->hw_key_idx = key->keyidx; + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + rtl8xxxu_cam_write(priv, key, mac_addr); + retval = 0; + break; + case DISABLE_KEY: + rtl8xxxu_write32(priv, REG_CAM_WRITE, 0x00000000); + val32 = CAM_CMD_POLLING | CAM_CMD_WRITE | + key->keyidx << CAM_CMD_KEY_SHIFT; + rtl8xxxu_write32(priv, REG_CAM_CMD, val32); + retval = 0; + break; + default: + dev_warn(dev, "%s: Unsupported command %02x\n", __func__, cmd); + } + + return retval; +} + +static int +rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_ampdu_params *params) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct device *dev = &priv->udev->dev; + u8 ampdu_factor, ampdu_density; + struct ieee80211_sta *sta = params->sta; + enum ieee80211_ampdu_mlme_action action = params->action; + + switch (action) { + case IEEE80211_AMPDU_TX_START: + dev_info(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__); + ampdu_factor = sta->ht_cap.ampdu_factor; + ampdu_density = sta->ht_cap.ampdu_density; + rtl8xxxu_set_ampdu_factor(priv, ampdu_factor); + rtl8xxxu_set_ampdu_min_space(priv, ampdu_density); + dev_dbg(dev, + "Changed HT: ampdu_factor %02x, ampdu_density %02x\n", + ampdu_factor, ampdu_density); + break; + case IEEE80211_AMPDU_TX_STOP_FLUSH: + dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__); + rtl8xxxu_set_ampdu_factor(priv, 0); + rtl8xxxu_set_ampdu_min_space(priv, 0); + break; + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n", + __func__); + rtl8xxxu_set_ampdu_factor(priv, 0); + rtl8xxxu_set_ampdu_min_space(priv, 0); + break; + case IEEE80211_AMPDU_RX_START: + dev_info(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__); + break; + case IEEE80211_AMPDU_RX_STOP: + dev_info(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__); + break; + default: + break; + } + return 0; +} + +static int rtl8xxxu_start(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + struct rtl8xxxu_rx_urb *rx_urb; + struct rtl8xxxu_tx_urb *tx_urb; + unsigned long flags; + int ret, i; + + ret = 0; + + init_usb_anchor(&priv->rx_anchor); + init_usb_anchor(&priv->tx_anchor); + init_usb_anchor(&priv->int_anchor); + + priv->fops->enable_rf(priv); + if (priv->usb_interrupts) { + ret = rtl8xxxu_submit_int_urb(hw); + if (ret) + goto exit; + } + + for (i = 0; i < RTL8XXXU_TX_URBS; i++) { + tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL); + if (!tx_urb) { + if (!i) + ret = -ENOMEM; + + goto error_out; + } + usb_init_urb(&tx_urb->urb); + INIT_LIST_HEAD(&tx_urb->list); + tx_urb->hw = hw; + list_add(&tx_urb->list, &priv->tx_urb_free_list); + priv->tx_urb_free_count++; + } + + priv->tx_stopped = false; + + spin_lock_irqsave(&priv->rx_urb_lock, flags); + priv->shutdown = false; + spin_unlock_irqrestore(&priv->rx_urb_lock, flags); + + for (i = 0; i < RTL8XXXU_RX_URBS; i++) { + rx_urb = kmalloc(sizeof(struct rtl8xxxu_rx_urb), GFP_KERNEL); + if (!rx_urb) { + if (!i) + ret = -ENOMEM; + + goto error_out; + } + usb_init_urb(&rx_urb->urb); + INIT_LIST_HEAD(&rx_urb->list); + rx_urb->hw = hw; + + ret = rtl8xxxu_submit_rx_urb(priv, rx_urb); + } +exit: + /* + * Accept all data and mgmt frames + */ + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); + rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff); + + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e); + + return ret; + +error_out: + rtl8xxxu_free_tx_resources(priv); + /* + * Disable all data and mgmt frames + */ + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); + rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000); + + return ret; +} + +static void rtl8xxxu_stop(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + unsigned long flags; + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000); + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); + + spin_lock_irqsave(&priv->rx_urb_lock, flags); + priv->shutdown = true; + spin_unlock_irqrestore(&priv->rx_urb_lock, flags); + + usb_kill_anchored_urbs(&priv->rx_anchor); + usb_kill_anchored_urbs(&priv->tx_anchor); + if (priv->usb_interrupts) + usb_kill_anchored_urbs(&priv->int_anchor); + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + priv->fops->disable_rf(priv); + + /* + * Disable interrupts + */ + if (priv->usb_interrupts) + rtl8xxxu_write32(priv, REG_USB_HIMR, 0); + + rtl8xxxu_free_rx_resources(priv); + rtl8xxxu_free_tx_resources(priv); +} + +static const struct ieee80211_ops rtl8xxxu_ops = { + .tx = rtl8xxxu_tx, + .add_interface = rtl8xxxu_add_interface, + .remove_interface = rtl8xxxu_remove_interface, + .config = rtl8xxxu_config, + .conf_tx = rtl8xxxu_conf_tx, + .bss_info_changed = rtl8xxxu_bss_info_changed, + .configure_filter = rtl8xxxu_configure_filter, + .set_rts_threshold = rtl8xxxu_set_rts_threshold, + .start = rtl8xxxu_start, + .stop = rtl8xxxu_stop, + .sw_scan_start = rtl8xxxu_sw_scan_start, + .sw_scan_complete = rtl8xxxu_sw_scan_complete, + .set_key = rtl8xxxu_set_key, + .ampdu_action = rtl8xxxu_ampdu_action, +}; + +static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv, + struct usb_interface *interface) +{ + struct usb_interface_descriptor *interface_desc; + struct usb_host_interface *host_interface; + struct usb_endpoint_descriptor *endpoint; + struct device *dev = &priv->udev->dev; + int i, j = 0, endpoints; + u8 dir, xtype, num; + int ret = 0; + + host_interface = &interface->altsetting[0]; + interface_desc = &host_interface->desc; + endpoints = interface_desc->bNumEndpoints; + + for (i = 0; i < endpoints; i++) { + endpoint = &host_interface->endpoint[i].desc; + + dir = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; + num = usb_endpoint_num(endpoint); + xtype = usb_endpoint_type(endpoint); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) + dev_dbg(dev, + "%s: endpoint: dir %02x, # %02x, type %02x\n", + __func__, dir, num, xtype); + if (usb_endpoint_dir_in(endpoint) && + usb_endpoint_xfer_bulk(endpoint)) { + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) + dev_dbg(dev, "%s: in endpoint num %i\n", + __func__, num); + + if (priv->pipe_in) { + dev_warn(dev, + "%s: Too many IN pipes\n", __func__); + ret = -EINVAL; + goto exit; + } + + priv->pipe_in = usb_rcvbulkpipe(priv->udev, num); + } + + if (usb_endpoint_dir_in(endpoint) && + usb_endpoint_xfer_int(endpoint)) { + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) + dev_dbg(dev, "%s: interrupt endpoint num %i\n", + __func__, num); + + if (priv->pipe_interrupt) { + dev_warn(dev, "%s: Too many INTERRUPT pipes\n", + __func__); + ret = -EINVAL; + goto exit; + } + + priv->pipe_interrupt = usb_rcvintpipe(priv->udev, num); + } + + if (usb_endpoint_dir_out(endpoint) && + usb_endpoint_xfer_bulk(endpoint)) { + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB) + dev_dbg(dev, "%s: out endpoint num %i\n", + __func__, num); + if (j >= RTL8XXXU_OUT_ENDPOINTS) { + dev_warn(dev, + "%s: Too many OUT pipes\n", __func__); + ret = -EINVAL; + goto exit; + } + priv->out_ep[j++] = num; + } + } +exit: + priv->nr_out_eps = j; + return ret; +} + +static int rtl8xxxu_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct rtl8xxxu_priv *priv; + struct ieee80211_hw *hw; + struct usb_device *udev; + struct ieee80211_supported_band *sband; + int ret = 0; + int untested = 1; + + udev = usb_get_dev(interface_to_usbdev(interface)); + + switch (id->idVendor) { + case USB_VENDOR_ID_REALTEK: + switch(id->idProduct) { + case 0x1724: + case 0x8176: + case 0x8178: + case 0x817f: + untested = 0; + break; + } + break; + case 0x7392: + if (id->idProduct == 0x7811) + untested = 0; + break; + case 0x050d: + if (id->idProduct == 0x1004) + untested = 0; + break; + default: + break; + } + + if (untested) { + rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE; + dev_info(&udev->dev, + "This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n", + id->idVendor, id->idProduct); + dev_info(&udev->dev, + "Please report results to Jes.Sorensen@gmail.com\n"); + } + + hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops); + if (!hw) { + ret = -ENOMEM; + goto exit; + } + + priv = hw->priv; + priv->hw = hw; + priv->udev = udev; + priv->fops = (struct rtl8xxxu_fileops *)id->driver_info; + mutex_init(&priv->usb_buf_mutex); + mutex_init(&priv->h2c_mutex); + INIT_LIST_HEAD(&priv->tx_urb_free_list); + spin_lock_init(&priv->tx_urb_lock); + INIT_LIST_HEAD(&priv->rx_urb_pending_list); + spin_lock_init(&priv->rx_urb_lock); + INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work); + + usb_set_intfdata(interface, hw); + + ret = rtl8xxxu_parse_usb(priv, interface); + if (ret) + goto exit; + + ret = rtl8xxxu_identify_chip(priv); + if (ret) { + dev_err(&udev->dev, "Fatal - failed to identify chip\n"); + goto exit; + } + + ret = rtl8xxxu_read_efuse(priv); + if (ret) { + dev_err(&udev->dev, "Fatal - failed to read EFuse\n"); + goto exit; + } + + ret = priv->fops->parse_efuse(priv); + if (ret) { + dev_err(&udev->dev, "Fatal - failed to parse EFuse\n"); + goto exit; + } + + rtl8xxxu_print_chipinfo(priv); + + ret = priv->fops->load_firmware(priv); + if (ret) { + dev_err(&udev->dev, "Fatal - failed to load firmware\n"); + goto exit; + } + + ret = rtl8xxxu_init_device(hw); + + hw->wiphy->max_scan_ssids = 1; + hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->queues = 4; + + sband = &rtl8xxxu_supported_band; + sband->ht_cap.ht_supported = true; + sband->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + sband->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; + sband->ht_cap.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40; + memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs)); + sband->ht_cap.mcs.rx_mask[0] = 0xff; + sband->ht_cap.mcs.rx_mask[4] = 0x01; + if (priv->rf_paths > 1) { + sband->ht_cap.mcs.rx_mask[1] = 0xff; + sband->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; + } + sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + /* + * Some APs will negotiate HT20_40 in a noisy environment leading + * to miserable performance. Rather than defaulting to this, only + * enable it if explicitly requested at module load time. + */ + if (rtl8xxxu_ht40_2g) { + dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n"); + sband->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + } + hw->wiphy->bands[NL80211_BAND_2GHZ] = sband; + + hw->wiphy->rts_threshold = 2347; + + SET_IEEE80211_DEV(priv->hw, &interface->dev); + SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr); + + hw->extra_tx_headroom = priv->fops->tx_desc_size; + ieee80211_hw_set(hw, SIGNAL_DBM); + /* + * The firmware handles rate control + */ + ieee80211_hw_set(hw, HAS_RATE_CONTROL); + ieee80211_hw_set(hw, AMPDU_AGGREGATION); + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + dev_err(&udev->dev, "%s: Failed to register: %i\n", + __func__, ret); + goto exit; + } + +exit: + if (ret < 0) + usb_put_dev(udev); + return ret; +} + +static void rtl8xxxu_disconnect(struct usb_interface *interface) +{ + struct rtl8xxxu_priv *priv; + struct ieee80211_hw *hw; + + hw = usb_get_intfdata(interface); + priv = hw->priv; + + ieee80211_unregister_hw(hw); + + priv->fops->power_off(priv); + + usb_set_intfdata(interface, NULL); + + dev_info(&priv->udev->dev, "disconnecting\n"); + + kfree(priv->fw_data); + mutex_destroy(&priv->usb_buf_mutex); + mutex_destroy(&priv->h2c_mutex); + + usb_put_dev(priv->udev); + ieee80211_free_hw(hw); +} + +static struct rtl8xxxu_fileops rtl8723au_fops = { + .parse_efuse = rtl8723au_parse_efuse, + .load_firmware = rtl8723au_load_firmware, + .power_on = rtl8723au_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, + .init_phy_rf = rtl8723au_init_phy_rf, + .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen1_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc16, + .enable_rf = rtl8xxxu_gen1_enable_rf, + .disable_rf = rtl8xxxu_gen1_disable_rf, + .usb_quirks = rtl8xxxu_gen1_usb_quirks, + .set_tx_power = rtl8xxxu_gen1_set_tx_power, + .update_rate_mask = rtl8xxxu_update_rate_mask, + .report_connect = rtl8xxxu_gen1_report_connect, + .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, + .trxff_boundary = 0x27ff, + .pbp_rx = PBP_PAGE_SIZE_128, + .pbp_tx = PBP_PAGE_SIZE_128, + .mactable = rtl8xxxu_gen1_mac_init_table, +}; + +static struct rtl8xxxu_fileops rtl8723bu_fops = { + .parse_efuse = rtl8723bu_parse_efuse, + .load_firmware = rtl8723bu_load_firmware, + .power_on = rtl8723bu_power_on, + .power_off = rtl8723bu_power_off, + .reset_8051 = rtl8723bu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8723bu_init_phy_bb, + .init_phy_rf = rtl8723bu_init_phy_rf, + .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen2_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .init_aggregation = rtl8723bu_init_aggregation, + .init_statistics = rtl8723bu_init_statistics, + .enable_rf = rtl8723b_enable_rf, + .disable_rf = rtl8xxxu_gen2_disable_rf, + .usb_quirks = rtl8xxxu_gen2_usb_quirks, + .set_tx_power = rtl8723b_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .has_s0s1 = 1, + .adda_1t_init = 0x01c00014, + .adda_1t_path_on = 0x01c00014, + .adda_2t_path_on_a = 0x01c00014, + .adda_2t_path_on_b = 0x01c00014, + .trxff_boundary = 0x3f7f, + .pbp_rx = PBP_PAGE_SIZE_256, + .pbp_tx = PBP_PAGE_SIZE_256, + .mactable = rtl8723b_mac_init_table, +}; + +#ifdef CONFIG_RTL8XXXU_UNTESTED + +static struct rtl8xxxu_fileops rtl8192cu_fops = { + .parse_efuse = rtl8192cu_parse_efuse, + .load_firmware = rtl8192cu_load_firmware, + .power_on = rtl8192cu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, + .init_phy_rf = rtl8192cu_init_phy_rf, + .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen1_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc16, + .enable_rf = rtl8xxxu_gen1_enable_rf, + .disable_rf = rtl8xxxu_gen1_disable_rf, + .usb_quirks = rtl8xxxu_gen1_usb_quirks, + .set_tx_power = rtl8xxxu_gen1_set_tx_power, + .update_rate_mask = rtl8xxxu_update_rate_mask, + .report_connect = rtl8xxxu_gen1_report_connect, + .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, + .trxff_boundary = 0x27ff, + .pbp_rx = PBP_PAGE_SIZE_128, + .pbp_tx = PBP_PAGE_SIZE_128, + .mactable = rtl8xxxu_gen1_mac_init_table, +}; + +#endif + +static struct rtl8xxxu_fileops rtl8192eu_fops = { + .parse_efuse = rtl8192eu_parse_efuse, + .load_firmware = rtl8192eu_load_firmware, + .power_on = rtl8192eu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8192eu_init_phy_bb, + .init_phy_rf = rtl8192eu_init_phy_rf, + .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen2_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .enable_rf = rtl8192e_enable_rf, + .disable_rf = rtl8xxxu_gen2_disable_rf, + .usb_quirks = rtl8xxxu_gen2_usb_quirks, + .set_tx_power = rtl8192e_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .has_s0s1 = 0, + .adda_1t_init = 0x0fc01616, + .adda_1t_path_on = 0x0fc01616, + .adda_2t_path_on_a = 0x0fc01616, + .adda_2t_path_on_b = 0x0fc01616, + .trxff_boundary = 0x3cff, + .mactable = rtl8192e_mac_init_table, + .total_page_num = TX_TOTAL_PAGE_NUM_8192E, + .page_num_hi = TX_PAGE_NUM_HI_PQ_8192E, + .page_num_lo = TX_PAGE_NUM_LO_PQ_8192E, + .page_num_norm = TX_PAGE_NUM_NORM_PQ_8192E, +}; + +static struct usb_device_id dev_table[] = { +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8723au_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1724, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8723au_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8723au_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8723bu_fops}, +#ifdef CONFIG_RTL8XXXU_UNTESTED +/* Still supported by rtlwifi */ +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8178, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817f, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +/* Tested by Larry Finger */ +{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7811, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +/* Tested by Andrea Merello */ +{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +/* Currently untested 8188 series devices */ +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8170, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8177, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817a, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817d, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817e, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818a, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x1058, 0x0631, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x094c, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1102, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe033, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8189, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9041, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ba, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1e1e, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x5088, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0052, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x005c, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0eb0, 0x9071, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x103c, 0x1629, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2a, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2e, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffa, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff8, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffb, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffc, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x1201, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +/* Currently untested 8192 series devices */ +{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x0950, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2102, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2103, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x341f, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe035, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ab, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0061, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0070, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0789, 0x016d, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x07aa, 0x0056, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8178, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9021, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0xf001, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2e2e, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0019, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0020, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3307, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3309, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330a, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x624d, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0100, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0091, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7822, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192cu_fops}, +#endif +{ } +}; + +static struct usb_driver rtl8xxxu_driver = { + .name = DRIVER_NAME, + .probe = rtl8xxxu_probe, + .disconnect = rtl8xxxu_disconnect, + .id_table = dev_table, + .no_dynamic_id = 1, + .disable_hub_initiated_lpm = 1, +}; + +static int __init rtl8xxxu_module_init(void) +{ + int res; + + res = usb_register(&rtl8xxxu_driver); + if (res < 0) + pr_err(DRIVER_NAME ": usb_register() failed (%i)\n", res); + + return res; +} + +static void __exit rtl8xxxu_module_exit(void) +{ + usb_deregister(&rtl8xxxu_driver); +} + + +MODULE_DEVICE_TABLE(usb, dev_table); + +module_init(rtl8xxxu_module_init); +module_exit(rtl8xxxu_module_exit); -- cgit v1.1 From 599119f683e623ff2517c318ac20655e8c135574 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:06 -0400 Subject: rtl8xxxu: move rtl8192e related code into rtl8xxxu_8192e.c This moves the rtl8192e code into it's own file. This is purely a code moving exercise, no code changes. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/Makefile | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 53 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1527 ++++++++++++++++++ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1677 ++------------------ 4 files changed, 1675 insertions(+), 1584 deletions(-) create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index a6dfeee..2b019a6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -1,3 +1,3 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o -rtl8xxxu-y := rtl8xxxu_core.o +rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 3e2643c..945e04e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1347,3 +1347,56 @@ struct rtl8xxxu_fileops { u8 page_num_lo; u8 page_num_norm; }; + +extern int rtl8xxxu_debug; + +extern const u32 rtl8xxxu_iqk_phy_iq_bb_reg[]; +u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr); +u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr); +u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr); +int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val); +int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val); +int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val); +u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg); +int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg, u32 data); +void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count); +void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count); +void rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, + const u32 *reg, u32 *backup); +void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, + const u32 *reg, u32 *backup); +void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, + bool path_a_on); +void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv, + const u32 *regs, u32 *backup); +void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, bool iqk_ok, + int result[][8], int candidate, bool tx_only); +void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, bool iqk_ok, + int result[][8], int candidate, bool tx_only); +int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rfregval *table, + enum rtl8xxxu_rfpath path); +int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_reg32val *array); +int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name); +void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv); +void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv); +int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); +void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw); +void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv); +void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi); +void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect); +void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv); +int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb, + struct ieee80211_rx_status *rx_status); +int rtl8xxxu_gen2_channel_to_group(int channel); +bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, + int result[][8], int c1, int c2); + +extern struct rtl8xxxu_fileops rtl8192eu_fops; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c new file mode 100644 index 0000000..98f4ba3 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -0,0 +1,1527 @@ +/* + * RTL8XXXU mac80211 USB driver - 8192e specific subdriver + * + * Copyright (c) 2014 - 2016 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +static struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = { + {0x011, 0xeb}, {0x012, 0x07}, {0x014, 0x75}, {0x303, 0xa7}, + {0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff}, + {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f}, + {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e}, + {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e}, + {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00}, + {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a}, + {0x525, 0x4f}, {0x540, 0x12}, {0x541, 0x64}, {0x550, 0x10}, + {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, {0x55d, 0xff}, + {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff}, + {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff}, + {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x638, 0x50}, + {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e}, + {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xc8}, + {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, + {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65}, + {0x70b, 0x87}, + {0xffff, 0xff}, +}; + +static struct rtl8xxxu_reg32val rtl8192eu_phy_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02220385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00390204}, + {0x828, 0x01000100}, {0x82c, 0x00390204}, + {0x830, 0x32323232}, {0x834, 0x30303030}, + {0x838, 0x30303030}, {0x83c, 0x30303030}, + {0x840, 0x00010000}, {0x844, 0x00010000}, + {0x848, 0x28282828}, {0x84c, 0x28282828}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x009a009a}, {0x85c, 0x01000014}, + {0x860, 0x66f60000}, {0x864, 0x061f0000}, + {0x868, 0x30303030}, {0x86c, 0x30303030}, + {0x870, 0x00000000}, {0x874, 0x55004200}, + {0x878, 0x08080808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x900, 0x00000000}, + {0x904, 0x00000023}, {0x908, 0x00000000}, + {0x90c, 0x81121313}, {0x910, 0x806c0001}, + {0x914, 0x00000001}, {0x918, 0x00000000}, + {0x91c, 0x00010000}, {0x924, 0x00000001}, + {0x928, 0x00000000}, {0x92c, 0x00000000}, + {0x930, 0x00000000}, {0x934, 0x00000000}, + {0x938, 0x00000000}, {0x93c, 0x00000000}, + {0x940, 0x00000000}, {0x944, 0x00000000}, + {0x94c, 0x00000008}, {0xa00, 0x00d0c7c8}, + {0xa04, 0x81ff000c}, {0xa08, 0x8c838300}, + {0xa0c, 0x2e68120f}, {0xa10, 0x95009b78}, + {0xa14, 0x1114d028}, {0xa18, 0x00881117}, + {0xa1c, 0x89140f00}, {0xa20, 0x1a1b0000}, + {0xa24, 0x090e1317}, {0xa28, 0x00000204}, + {0xa2c, 0x00d30000}, {0xa70, 0x101fff00}, + {0xa74, 0x00000007}, {0xa78, 0x00000900}, + {0xa7c, 0x225b0606}, {0xa80, 0x218075b1}, + {0xb38, 0x00000000}, {0xc00, 0x48071d40}, + {0xc04, 0x03a05633}, {0xc08, 0x000000e4}, + {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, + {0xc14, 0x40000100}, {0xc18, 0x08800000}, + {0xc1c, 0x40000100}, {0xc20, 0x00000000}, + {0xc24, 0x00000000}, {0xc28, 0x00000000}, + {0xc2c, 0x00000000}, {0xc30, 0x69e9ac47}, + {0xc34, 0x469652af}, {0xc38, 0x49795994}, + {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, + {0xc44, 0x000100b7}, {0xc48, 0xec020107}, + {0xc4c, 0x007f037f}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc50, 0x00340220}, +#else + {0xc50, 0x00340020}, +#endif + {0xc54, 0x0080801f}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc58, 0x00000220}, +#else + {0xc58, 0x00000020}, +#endif + {0xc5c, 0x00248492}, {0xc60, 0x00000000}, + {0xc64, 0x7112848b}, {0xc68, 0x47c00bff}, + {0xc6c, 0x00000036}, {0xc70, 0x00000600}, + {0xc74, 0x02013169}, {0xc78, 0x0000001f}, + {0xc7c, 0x00b91612}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc80, 0x2d4000b5}, +#else + {0xc80, 0x40000100}, +#endif + {0xc84, 0x21f60000}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0xc88, 0x2d4000b5}, +#else + {0xc88, 0x40000100}, +#endif + {0xc8c, 0xa0e40000}, {0xc90, 0x00121820}, + {0xc94, 0x00000000}, {0xc98, 0x00121820}, + {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, + {0xca4, 0x000300a0}, {0xca8, 0x00000000}, + {0xcac, 0x00000000}, {0xcb0, 0x00000000}, + {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, + {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, + {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, + {0xccc, 0x00000000}, {0xcd0, 0x00000000}, + {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, + {0xcdc, 0x00766932}, {0xce0, 0x00222222}, + {0xce4, 0x00040000}, {0xce8, 0x77644302}, + {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, + {0xd04, 0x00020403}, {0xd08, 0x0000907f}, + {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, + {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, + {0xd1c, 0x0000007f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xd80, 0x01081008}, + {0xd84, 0x00000800}, {0xd88, 0xf0b50000}, + {0xe00, 0x30303030}, {0xe04, 0x30303030}, + {0xe08, 0x03903030}, {0xe10, 0x30303030}, + {0xe14, 0x30303030}, {0xe18, 0x30303030}, + {0xe1c, 0x30303030}, {0xe28, 0x00000000}, + {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, + {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, + {0xe40, 0x01007c00}, {0xe44, 0x01004800}, + {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, + {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, + {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, + {0xe60, 0x00000008}, {0xe68, 0x0fc05656}, + {0xe6c, 0x03c09696}, {0xe70, 0x03c09696}, + {0xe74, 0x0c005656}, {0xe78, 0x0c005656}, + {0xe7c, 0x0c005656}, {0xe80, 0x0c005656}, + {0xe84, 0x03c09696}, {0xe88, 0x0c005656}, + {0xe8c, 0x03c09696}, {0xed0, 0x03c09696}, + {0xed4, 0x03c09696}, {0xed8, 0x03c09696}, + {0xedc, 0x0000d6d6}, {0xee0, 0x0000d6d6}, + {0xeec, 0x0fc01616}, {0xee4, 0xb0000c1c}, + {0xee8, 0x00000001}, {0xf14, 0x00000003}, + {0xf4c, 0x00000000}, {0xf00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_std_table[] = { + {0xc78, 0xfb000001}, {0xc78, 0xfb010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfb030001}, + {0xc78, 0xfb040001}, {0xc78, 0xfb050001}, + {0xc78, 0xfa060001}, {0xc78, 0xf9070001}, + {0xc78, 0xf8080001}, {0xc78, 0xf7090001}, + {0xc78, 0xf60a0001}, {0xc78, 0xf50b0001}, + {0xc78, 0xf40c0001}, {0xc78, 0xf30d0001}, + {0xc78, 0xf20e0001}, {0xc78, 0xf10f0001}, + {0xc78, 0xf0100001}, {0xc78, 0xef110001}, + {0xc78, 0xee120001}, {0xc78, 0xed130001}, + {0xc78, 0xec140001}, {0xc78, 0xeb150001}, + {0xc78, 0xea160001}, {0xc78, 0xe9170001}, + {0xc78, 0xe8180001}, {0xc78, 0xe7190001}, + {0xc78, 0xc81a0001}, {0xc78, 0xc71b0001}, + {0xc78, 0xc61c0001}, {0xc78, 0x071d0001}, + {0xc78, 0x061e0001}, {0xc78, 0x051f0001}, + {0xc78, 0x04200001}, {0xc78, 0x03210001}, + {0xc78, 0xaa220001}, {0xc78, 0xa9230001}, + {0xc78, 0xa8240001}, {0xc78, 0xa7250001}, + {0xc78, 0xa6260001}, {0xc78, 0x85270001}, + {0xc78, 0x84280001}, {0xc78, 0x83290001}, + {0xc78, 0x252a0001}, {0xc78, 0x242b0001}, + {0xc78, 0x232c0001}, {0xc78, 0x222d0001}, + {0xc78, 0x672e0001}, {0xc78, 0x662f0001}, + {0xc78, 0x65300001}, {0xc78, 0x64310001}, + {0xc78, 0x63320001}, {0xc78, 0x62330001}, + {0xc78, 0x61340001}, {0xc78, 0x45350001}, + {0xc78, 0x44360001}, {0xc78, 0x43370001}, + {0xc78, 0x42380001}, {0xc78, 0x41390001}, + {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, + {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, + {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, + {0xc78, 0xfb400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfb420001}, {0xc78, 0xfb430001}, + {0xc78, 0xfb440001}, {0xc78, 0xfb450001}, + {0xc78, 0xfa460001}, {0xc78, 0xf9470001}, + {0xc78, 0xf8480001}, {0xc78, 0xf7490001}, + {0xc78, 0xf64a0001}, {0xc78, 0xf54b0001}, + {0xc78, 0xf44c0001}, {0xc78, 0xf34d0001}, + {0xc78, 0xf24e0001}, {0xc78, 0xf14f0001}, + {0xc78, 0xf0500001}, {0xc78, 0xef510001}, + {0xc78, 0xee520001}, {0xc78, 0xed530001}, + {0xc78, 0xec540001}, {0xc78, 0xeb550001}, + {0xc78, 0xea560001}, {0xc78, 0xe9570001}, + {0xc78, 0xe8580001}, {0xc78, 0xe7590001}, + {0xc78, 0xe65a0001}, {0xc78, 0xe55b0001}, + {0xc78, 0xe45c0001}, {0xc78, 0xe35d0001}, + {0xc78, 0xe25e0001}, {0xc78, 0xe15f0001}, + {0xc78, 0x8a600001}, {0xc78, 0x89610001}, + {0xc78, 0x88620001}, {0xc78, 0x87630001}, + {0xc78, 0x86640001}, {0xc78, 0x85650001}, + {0xc78, 0x84660001}, {0xc78, 0x83670001}, + {0xc78, 0x82680001}, {0xc78, 0x6b690001}, + {0xc78, 0x6a6a0001}, {0xc78, 0x696b0001}, + {0xc78, 0x686c0001}, {0xc78, 0x676d0001}, + {0xc78, 0x666e0001}, {0xc78, 0x656f0001}, + {0xc78, 0x64700001}, {0xc78, 0x63710001}, + {0xc78, 0x62720001}, {0xc78, 0x61730001}, + {0xc78, 0x49740001}, {0xc78, 0x48750001}, + {0xc78, 0x47760001}, {0xc78, 0x46770001}, + {0xc78, 0x45780001}, {0xc78, 0x44790001}, + {0xc78, 0x437a0001}, {0xc78, 0x427b0001}, + {0xc78, 0x417c0001}, {0xc78, 0x407d0001}, + {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, + {0xc50, 0x00040022}, {0xc50, 0x00040020}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_highpa_table[] = { + {0xc78, 0xfa000001}, {0xc78, 0xf9010001}, + {0xc78, 0xf8020001}, {0xc78, 0xf7030001}, + {0xc78, 0xf6040001}, {0xc78, 0xf5050001}, + {0xc78, 0xf4060001}, {0xc78, 0xf3070001}, + {0xc78, 0xf2080001}, {0xc78, 0xf1090001}, + {0xc78, 0xf00a0001}, {0xc78, 0xef0b0001}, + {0xc78, 0xee0c0001}, {0xc78, 0xed0d0001}, + {0xc78, 0xec0e0001}, {0xc78, 0xeb0f0001}, + {0xc78, 0xea100001}, {0xc78, 0xe9110001}, + {0xc78, 0xe8120001}, {0xc78, 0xe7130001}, + {0xc78, 0xe6140001}, {0xc78, 0xe5150001}, + {0xc78, 0xe4160001}, {0xc78, 0xe3170001}, + {0xc78, 0xe2180001}, {0xc78, 0xe1190001}, + {0xc78, 0x8a1a0001}, {0xc78, 0x891b0001}, + {0xc78, 0x881c0001}, {0xc78, 0x871d0001}, + {0xc78, 0x861e0001}, {0xc78, 0x851f0001}, + {0xc78, 0x84200001}, {0xc78, 0x83210001}, + {0xc78, 0x82220001}, {0xc78, 0x6a230001}, + {0xc78, 0x69240001}, {0xc78, 0x68250001}, + {0xc78, 0x67260001}, {0xc78, 0x66270001}, + {0xc78, 0x65280001}, {0xc78, 0x64290001}, + {0xc78, 0x632a0001}, {0xc78, 0x622b0001}, + {0xc78, 0x612c0001}, {0xc78, 0x602d0001}, + {0xc78, 0x472e0001}, {0xc78, 0x462f0001}, + {0xc78, 0x45300001}, {0xc78, 0x44310001}, + {0xc78, 0x43320001}, {0xc78, 0x42330001}, + {0xc78, 0x41340001}, {0xc78, 0x40350001}, + {0xc78, 0x40360001}, {0xc78, 0x40370001}, + {0xc78, 0x40380001}, {0xc78, 0x40390001}, + {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, + {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, + {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, + {0xc78, 0xfa400001}, {0xc78, 0xf9410001}, + {0xc78, 0xf8420001}, {0xc78, 0xf7430001}, + {0xc78, 0xf6440001}, {0xc78, 0xf5450001}, + {0xc78, 0xf4460001}, {0xc78, 0xf3470001}, + {0xc78, 0xf2480001}, {0xc78, 0xf1490001}, + {0xc78, 0xf04a0001}, {0xc78, 0xef4b0001}, + {0xc78, 0xee4c0001}, {0xc78, 0xed4d0001}, + {0xc78, 0xec4e0001}, {0xc78, 0xeb4f0001}, + {0xc78, 0xea500001}, {0xc78, 0xe9510001}, + {0xc78, 0xe8520001}, {0xc78, 0xe7530001}, + {0xc78, 0xe6540001}, {0xc78, 0xe5550001}, + {0xc78, 0xe4560001}, {0xc78, 0xe3570001}, + {0xc78, 0xe2580001}, {0xc78, 0xe1590001}, + {0xc78, 0x8a5a0001}, {0xc78, 0x895b0001}, + {0xc78, 0x885c0001}, {0xc78, 0x875d0001}, + {0xc78, 0x865e0001}, {0xc78, 0x855f0001}, + {0xc78, 0x84600001}, {0xc78, 0x83610001}, + {0xc78, 0x82620001}, {0xc78, 0x6a630001}, + {0xc78, 0x69640001}, {0xc78, 0x68650001}, + {0xc78, 0x67660001}, {0xc78, 0x66670001}, + {0xc78, 0x65680001}, {0xc78, 0x64690001}, + {0xc78, 0x636a0001}, {0xc78, 0x626b0001}, + {0xc78, 0x616c0001}, {0xc78, 0x606d0001}, + {0xc78, 0x476e0001}, {0xc78, 0x466f0001}, + {0xc78, 0x45700001}, {0xc78, 0x44710001}, + {0xc78, 0x43720001}, {0xc78, 0x42730001}, + {0xc78, 0x41740001}, {0xc78, 0x40750001}, + {0xc78, 0x40760001}, {0xc78, 0x40770001}, + {0xc78, 0x40780001}, {0xc78, 0x40790001}, + {0xc78, 0x407a0001}, {0xc78, 0x407b0001}, + {0xc78, 0x407c0001}, {0xc78, 0x407d0001}, + {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, + {0xc50, 0x00040222}, {0xc50, 0x00040220}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = { + {0x7f, 0x00000082}, {0x81, 0x0003fc00}, + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1b, 0x00000064}, {0x1e, 0x00080009}, + {0x1f, 0x00000880}, {0x2f, 0x0001a060}, + {0x3f, 0x00000000}, {0x42, 0x000060c0}, + {0x57, 0x000d0000}, {0x58, 0x000be180}, + {0x67, 0x00001552}, {0x83, 0x00000000}, + {0xb0, 0x000ff9f1}, {0xb1, 0x00055418}, + {0xb2, 0x0008cc00}, {0xb4, 0x00043083}, + {0xb5, 0x00008166}, {0xb6, 0x0000803e}, + {0xb7, 0x0001c69f}, {0xb8, 0x0000407f}, + {0xb9, 0x00080001}, {0xba, 0x00040001}, + {0xbb, 0x00000400}, {0xbf, 0x000c0000}, + {0xc2, 0x00002400}, {0xc3, 0x00000009}, + {0xc4, 0x00040c91}, {0xc5, 0x00099999}, + {0xc6, 0x000000a3}, {0xc7, 0x00088820}, + {0xc8, 0x00076c06}, {0xc9, 0x00000000}, + {0xca, 0x00080000}, {0xdf, 0x00000180}, + {0xef, 0x000001a0}, {0x51, 0x00069545}, + {0x52, 0x0007e45e}, {0x53, 0x00000071}, + {0x56, 0x00051ff3}, {0x35, 0x000000a8}, + {0x35, 0x000001e2}, {0x35, 0x000002a8}, + {0x36, 0x00001c24}, {0x36, 0x00009c24}, + {0x36, 0x00011c24}, {0x36, 0x00019c24}, + {0x18, 0x00000c07}, {0x5a, 0x00048000}, + {0x19, 0x000739d0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x34, 0x0000a093}, {0x34, 0x0000908f}, + {0x34, 0x0000808c}, {0x34, 0x0000704d}, + {0x34, 0x0000604a}, {0x34, 0x00005047}, + {0x34, 0x0000400a}, {0x34, 0x00003007}, + {0x34, 0x00002004}, {0x34, 0x00001001}, + {0x34, 0x00000000}, +#else + /* Regular */ + {0x34, 0x0000add7}, {0x34, 0x00009dd4}, + {0x34, 0x00008dd1}, {0x34, 0x00007dce}, + {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, + {0x34, 0x00004dc5}, {0x34, 0x000034cc}, + {0x34, 0x0000244f}, {0x34, 0x0000144c}, + {0x34, 0x00000014}, +#endif + {0x00, 0x00030159}, + {0x84, 0x00068180}, + {0x86, 0x0000014e}, + {0x87, 0x00048e00}, + {0x8e, 0x00065540}, + {0x8f, 0x00088000}, + {0xef, 0x000020a0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000f07b0}, +#else + {0x3b, 0x000f02b0}, +#endif + {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, + {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, + {0x3b, 0x000a0080}, {0x3b, 0x00090080}, + {0x3b, 0x0008f780}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000787b0}, +#else + {0x3b, 0x00078730}, +#endif + {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, + {0x3b, 0x00040620}, {0x3b, 0x00037090}, + {0x3b, 0x00020080}, {0x3b, 0x0001f060}, + {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, + {0xfe, 0x00000000}, {0x18, 0x0000fc07}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00000001}, {0x1f, 0x00080000}, + {0x00, 0x00033e70}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192eu_radiob_init_table[] = { + {0x7f, 0x00000082}, {0x81, 0x0003fc00}, + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1b, 0x00000064}, {0x1e, 0x00080009}, + {0x1f, 0x00000880}, {0x2f, 0x0001a060}, + {0x3f, 0x00000000}, {0x42, 0x000060c0}, + {0x57, 0x000d0000}, {0x58, 0x000be180}, + {0x67, 0x00001552}, {0x7f, 0x00000082}, + {0x81, 0x0003f000}, {0x83, 0x00000000}, + {0xdf, 0x00000180}, {0xef, 0x000001a0}, + {0x51, 0x00069545}, {0x52, 0x0007e42e}, + {0x53, 0x00000071}, {0x56, 0x00051ff3}, + {0x35, 0x000000a8}, {0x35, 0x000001e0}, + {0x35, 0x000002a8}, {0x36, 0x00001ca8}, + {0x36, 0x00009c24}, {0x36, 0x00011c24}, + {0x36, 0x00019c24}, {0x18, 0x00000c07}, + {0x5a, 0x00048000}, {0x19, 0x000739d0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x34, 0x0000a093}, {0x34, 0x0000908f}, + {0x34, 0x0000808c}, {0x34, 0x0000704d}, + {0x34, 0x0000604a}, {0x34, 0x00005047}, + {0x34, 0x0000400a}, {0x34, 0x00003007}, + {0x34, 0x00002004}, {0x34, 0x00001001}, + {0x34, 0x00000000}, +#else + {0x34, 0x0000add7}, {0x34, 0x00009dd4}, + {0x34, 0x00008dd1}, {0x34, 0x00007dce}, + {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, + {0x34, 0x00004dc5}, {0x34, 0x000034cc}, + {0x34, 0x0000244f}, {0x34, 0x0000144c}, + {0x34, 0x00000014}, +#endif + {0x00, 0x00030159}, {0x84, 0x00068180}, + {0x86, 0x000000ce}, {0x87, 0x00048a00}, + {0x8e, 0x00065540}, {0x8f, 0x00088000}, + {0xef, 0x000020a0}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000f07b0}, +#else + {0x3b, 0x000f02b0}, +#endif + + {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, + {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, + {0x3b, 0x000a0080}, {0x3b, 0x00090080}, + {0x3b, 0x0008f780}, +#ifdef EXT_PA_8192EU + /* External PA or external LNA */ + {0x3b, 0x000787b0}, +#else + {0x3b, 0x00078730}, +#endif + {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, + {0x3b, 0x00040620}, {0x3b, 0x00037090}, + {0x3b, 0x00020080}, {0x3b, 0x0001f060}, + {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, + {0x00, 0x00010159}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1e, 0x00000001}, + {0x1f, 0x00080000}, {0x00, 0x00033e70}, + {0xff, 0xffffffff} +}; + +static void +rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8xxxu_gen2_channel_to_group(channel); + + cck = priv->cck_tx_power_index_A[group]; + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_A[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_A[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].a; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].a; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs); + + if (priv->tx_paths > 1) { + cck = priv->cck_tx_power_index_B[group]; + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xffffff00; + val32 |= cck; + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | + ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs); + } +} + +static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name); + dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8192eu_efuse)); + for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + return 0; +} + +static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + fw_name = "rtlwifi/rtl8192eu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + +static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD | SYS_FUNC_DIO_RF | + SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB); + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table); + + if (priv->hi_pa) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table); + else + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table); +} + +static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A); + if (ret) + goto exit; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B); + +exit: + return ret; +} + +static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c; + int result = 0; + + /* + * TX IQK + * PA/PAD controlled by 0x0 + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + + return result; +} + +static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* PA/PAD controlled by 0x0 */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", + __func__); + +out: + return result; +} + +static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc; + int result = 0; + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path B IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else + dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n", + __func__); + + return result; +} + +static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* + * PA/PAD controlled by 0x0 + * Vendor driver restores RF_A here which I believe is a bug + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(30)) && + ((reg_ec4 & 0x03ff0000) != 0x01320000) && + ((reg_ecc & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", + __func__); + +out: + return result; +} + +static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok, path_b_ok; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); + val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->rf_paths > 1) { + /* Path A into standby */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_iqk_path_b(priv); + if (path_b_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); + } + + /* Back to BB mode, load original value */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->rf_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + bool simu; + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + for (i = 0; i < 3; i++) { + rtl8192eu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 1, 2); + if (simu) + candidate = 1; + else + candidate = 3; + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->rf_paths > 1) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); +} + +/* + * This is needed for 8723bu as well, presumable + */ +static void rtl8192e_crystal_afe_adjust(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + + /* + * 40Mhz crystal source, MAC 0x28[2]=0 + */ + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + val8 &= 0xfb; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + + val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); + val32 &= 0xfffffc7f; + rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); + + /* + * 92e AFE parameter + * AFE PLL KVCO selection, MAC 0x28[6]=1 + */ + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + val8 &= 0xbf; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + + /* + * AFE PLL KVCO selection, MAC 0x78[21]=0 + */ + val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); + val32 &= 0xffdfffff; + rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); +} + +static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /* Clear suspend enable and power down enable*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); +} + +static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* disable HWPDN 0x04[15]=0*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable SW LPS 0x04[10]= 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(2); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* release WLON reset 0x04[16]= 1*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + +exit: + return ret; +} + +static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv) +{ + u16 val16; + u32 val32; + int ret; + + ret = 0; + + val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); + if (val32 & SYS_CFG_SPS_LDO_SEL) { + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3); + } else { + /* + * Raise 1.2V voltage + */ + val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL); + val32 &= 0xff0fffff; + val32 |= 0x00500000; + rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32); + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83); + } + + /* + * Adjust AFE before enabling PLL + */ + rtl8192e_crystal_afe_adjust(priv); + rtl8192e_disabled_to_emu(priv); + + ret = rtl8192e_emu_to_active(priv); + if (ret) + goto exit; + + rtl8xxxu_write16(priv, REG_CR, 0x0000); + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + +exit: + return ret; +} + +static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv) +{ + u32 val32; + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +} + +struct rtl8xxxu_fileops rtl8192eu_fops = { + .parse_efuse = rtl8192eu_parse_efuse, + .load_firmware = rtl8192eu_load_firmware, + .power_on = rtl8192eu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8192eu_init_phy_bb, + .init_phy_rf = rtl8192eu_init_phy_rf, + .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen2_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .enable_rf = rtl8192e_enable_rf, + .disable_rf = rtl8xxxu_gen2_disable_rf, + .usb_quirks = rtl8xxxu_gen2_usb_quirks, + .set_tx_power = rtl8192e_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .has_s0s1 = 0, + .adda_1t_init = 0x0fc01616, + .adda_1t_path_on = 0x0fc01616, + .adda_2t_path_on_a = 0x0fc01616, + .adda_2t_path_on_b = 0x0fc01616, + .trxff_boundary = 0x3cff, + .mactable = rtl8192e_mac_init_table, + .total_page_num = TX_TOTAL_PAGE_NUM_8192E, + .page_num_hi = TX_PAGE_NUM_HI_PQ_8192E, + .page_num_lo = TX_PAGE_NUM_LO_PQ_8192E, + .page_num_norm = TX_PAGE_NUM_NORM_PQ_8192E, +}; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index f2ce8c9..d97de86 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -42,7 +42,7 @@ #define DRIVER_NAME "rtl8xxxu" -static int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; +int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; static bool rtl8xxxu_ht40_2g; MODULE_AUTHOR("Jes Sorensen "); @@ -184,36 +184,6 @@ static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { {0xffff, 0xff}, }; -static struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = { - {0x011, 0xeb}, {0x012, 0x07}, {0x014, 0x75}, {0x303, 0xa7}, - {0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x00}, - {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, - {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, - {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, - {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, - {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, - {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, - {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, - {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, - {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff}, - {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f}, - {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e}, - {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e}, - {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00}, - {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a}, - {0x525, 0x4f}, {0x540, 0x12}, {0x541, 0x64}, {0x550, 0x10}, - {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, {0x55d, 0xff}, - {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff}, - {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff}, - {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x638, 0x50}, - {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e}, - {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xc8}, - {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, - {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65}, - {0x70b, 0x87}, - {0xffff, 0xff}, -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_power_base rtl8188r_power_base = { .reg_0e00 = 0x06080808, @@ -678,138 +648,6 @@ static struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = { {0xffff, 0xffffffff}, }; -static struct rtl8xxxu_reg32val rtl8192eu_phy_init_table[] = { - {0x800, 0x80040000}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10001331}, {0x814, 0x020c3d10}, - {0x818, 0x02220385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00390204}, - {0x828, 0x01000100}, {0x82c, 0x00390204}, - {0x830, 0x32323232}, {0x834, 0x30303030}, - {0x838, 0x30303030}, {0x83c, 0x30303030}, - {0x840, 0x00010000}, {0x844, 0x00010000}, - {0x848, 0x28282828}, {0x84c, 0x28282828}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x009a009a}, {0x85c, 0x01000014}, - {0x860, 0x66f60000}, {0x864, 0x061f0000}, - {0x868, 0x30303030}, {0x86c, 0x30303030}, - {0x870, 0x00000000}, {0x874, 0x55004200}, - {0x878, 0x08080808}, {0x87c, 0x00000000}, - {0x880, 0xb0000c1c}, {0x884, 0x00000001}, - {0x888, 0x00000000}, {0x88c, 0xcc0000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x900, 0x00000000}, - {0x904, 0x00000023}, {0x908, 0x00000000}, - {0x90c, 0x81121313}, {0x910, 0x806c0001}, - {0x914, 0x00000001}, {0x918, 0x00000000}, - {0x91c, 0x00010000}, {0x924, 0x00000001}, - {0x928, 0x00000000}, {0x92c, 0x00000000}, - {0x930, 0x00000000}, {0x934, 0x00000000}, - {0x938, 0x00000000}, {0x93c, 0x00000000}, - {0x940, 0x00000000}, {0x944, 0x00000000}, - {0x94c, 0x00000008}, {0xa00, 0x00d0c7c8}, - {0xa04, 0x81ff000c}, {0xa08, 0x8c838300}, - {0xa0c, 0x2e68120f}, {0xa10, 0x95009b78}, - {0xa14, 0x1114d028}, {0xa18, 0x00881117}, - {0xa1c, 0x89140f00}, {0xa20, 0x1a1b0000}, - {0xa24, 0x090e1317}, {0xa28, 0x00000204}, - {0xa2c, 0x00d30000}, {0xa70, 0x101fff00}, - {0xa74, 0x00000007}, {0xa78, 0x00000900}, - {0xa7c, 0x225b0606}, {0xa80, 0x218075b1}, - {0xb38, 0x00000000}, {0xc00, 0x48071d40}, - {0xc04, 0x03a05633}, {0xc08, 0x000000e4}, - {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000}, - {0xc14, 0x40000100}, {0xc18, 0x08800000}, - {0xc1c, 0x40000100}, {0xc20, 0x00000000}, - {0xc24, 0x00000000}, {0xc28, 0x00000000}, - {0xc2c, 0x00000000}, {0xc30, 0x69e9ac47}, - {0xc34, 0x469652af}, {0xc38, 0x49795994}, - {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f}, - {0xc44, 0x000100b7}, {0xc48, 0xec020107}, - {0xc4c, 0x007f037f}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc50, 0x00340220}, -#else - {0xc50, 0x00340020}, -#endif - {0xc54, 0x0080801f}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc58, 0x00000220}, -#else - {0xc58, 0x00000020}, -#endif - {0xc5c, 0x00248492}, {0xc60, 0x00000000}, - {0xc64, 0x7112848b}, {0xc68, 0x47c00bff}, - {0xc6c, 0x00000036}, {0xc70, 0x00000600}, - {0xc74, 0x02013169}, {0xc78, 0x0000001f}, - {0xc7c, 0x00b91612}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc80, 0x2d4000b5}, -#else - {0xc80, 0x40000100}, -#endif - {0xc84, 0x21f60000}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0xc88, 0x2d4000b5}, -#else - {0xc88, 0x40000100}, -#endif - {0xc8c, 0xa0e40000}, {0xc90, 0x00121820}, - {0xc94, 0x00000000}, {0xc98, 0x00121820}, - {0xc9c, 0x00007f7f}, {0xca0, 0x00000000}, - {0xca4, 0x000300a0}, {0xca8, 0x00000000}, - {0xcac, 0x00000000}, {0xcb0, 0x00000000}, - {0xcb4, 0x00000000}, {0xcb8, 0x00000000}, - {0xcbc, 0x28000000}, {0xcc0, 0x00000000}, - {0xcc4, 0x00000000}, {0xcc8, 0x00000000}, - {0xccc, 0x00000000}, {0xcd0, 0x00000000}, - {0xcd4, 0x00000000}, {0xcd8, 0x64b22427}, - {0xcdc, 0x00766932}, {0xce0, 0x00222222}, - {0xce4, 0x00040000}, {0xce8, 0x77644302}, - {0xcec, 0x2f97d40c}, {0xd00, 0x00080740}, - {0xd04, 0x00020403}, {0xd08, 0x0000907f}, - {0xd0c, 0x20010201}, {0xd10, 0xa0633333}, - {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b}, - {0xd1c, 0x0000007f}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00127353}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000282}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xd80, 0x01081008}, - {0xd84, 0x00000800}, {0xd88, 0xf0b50000}, - {0xe00, 0x30303030}, {0xe04, 0x30303030}, - {0xe08, 0x03903030}, {0xe10, 0x30303030}, - {0xe14, 0x30303030}, {0xe18, 0x30303030}, - {0xe1c, 0x30303030}, {0xe28, 0x00000000}, - {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f}, - {0xe38, 0x02140102}, {0xe3c, 0x681604c2}, - {0xe40, 0x01007c00}, {0xe44, 0x01004800}, - {0xe48, 0xfb000000}, {0xe4c, 0x000028d1}, - {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f}, - {0xe58, 0x02140102}, {0xe5c, 0x28160d05}, - {0xe60, 0x00000008}, {0xe68, 0x0fc05656}, - {0xe6c, 0x03c09696}, {0xe70, 0x03c09696}, - {0xe74, 0x0c005656}, {0xe78, 0x0c005656}, - {0xe7c, 0x0c005656}, {0xe80, 0x0c005656}, - {0xe84, 0x03c09696}, {0xe88, 0x0c005656}, - {0xe8c, 0x03c09696}, {0xed0, 0x03c09696}, - {0xed4, 0x03c09696}, {0xed8, 0x03c09696}, - {0xedc, 0x0000d6d6}, {0xee0, 0x0000d6d6}, - {0xeec, 0x0fc01616}, {0xee4, 0xb0000c1c}, - {0xee8, 0x00000001}, {0xf14, 0x00000003}, - {0xf4c, 0x00000000}, {0xf00, 0x00000300}, - {0xffff, 0xffffffff}, -}; - static struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = { {0xc78, 0x7b000001}, {0xc78, 0x7b010001}, {0xc78, 0x7b020001}, {0xc78, 0x7b030001}, @@ -1049,144 +887,6 @@ static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { {0xffff, 0xffffffff} }; -static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_std_table[] = { - {0xc78, 0xfb000001}, {0xc78, 0xfb010001}, - {0xc78, 0xfb020001}, {0xc78, 0xfb030001}, - {0xc78, 0xfb040001}, {0xc78, 0xfb050001}, - {0xc78, 0xfa060001}, {0xc78, 0xf9070001}, - {0xc78, 0xf8080001}, {0xc78, 0xf7090001}, - {0xc78, 0xf60a0001}, {0xc78, 0xf50b0001}, - {0xc78, 0xf40c0001}, {0xc78, 0xf30d0001}, - {0xc78, 0xf20e0001}, {0xc78, 0xf10f0001}, - {0xc78, 0xf0100001}, {0xc78, 0xef110001}, - {0xc78, 0xee120001}, {0xc78, 0xed130001}, - {0xc78, 0xec140001}, {0xc78, 0xeb150001}, - {0xc78, 0xea160001}, {0xc78, 0xe9170001}, - {0xc78, 0xe8180001}, {0xc78, 0xe7190001}, - {0xc78, 0xc81a0001}, {0xc78, 0xc71b0001}, - {0xc78, 0xc61c0001}, {0xc78, 0x071d0001}, - {0xc78, 0x061e0001}, {0xc78, 0x051f0001}, - {0xc78, 0x04200001}, {0xc78, 0x03210001}, - {0xc78, 0xaa220001}, {0xc78, 0xa9230001}, - {0xc78, 0xa8240001}, {0xc78, 0xa7250001}, - {0xc78, 0xa6260001}, {0xc78, 0x85270001}, - {0xc78, 0x84280001}, {0xc78, 0x83290001}, - {0xc78, 0x252a0001}, {0xc78, 0x242b0001}, - {0xc78, 0x232c0001}, {0xc78, 0x222d0001}, - {0xc78, 0x672e0001}, {0xc78, 0x662f0001}, - {0xc78, 0x65300001}, {0xc78, 0x64310001}, - {0xc78, 0x63320001}, {0xc78, 0x62330001}, - {0xc78, 0x61340001}, {0xc78, 0x45350001}, - {0xc78, 0x44360001}, {0xc78, 0x43370001}, - {0xc78, 0x42380001}, {0xc78, 0x41390001}, - {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, - {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, - {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, - {0xc78, 0xfb400001}, {0xc78, 0xfb410001}, - {0xc78, 0xfb420001}, {0xc78, 0xfb430001}, - {0xc78, 0xfb440001}, {0xc78, 0xfb450001}, - {0xc78, 0xfa460001}, {0xc78, 0xf9470001}, - {0xc78, 0xf8480001}, {0xc78, 0xf7490001}, - {0xc78, 0xf64a0001}, {0xc78, 0xf54b0001}, - {0xc78, 0xf44c0001}, {0xc78, 0xf34d0001}, - {0xc78, 0xf24e0001}, {0xc78, 0xf14f0001}, - {0xc78, 0xf0500001}, {0xc78, 0xef510001}, - {0xc78, 0xee520001}, {0xc78, 0xed530001}, - {0xc78, 0xec540001}, {0xc78, 0xeb550001}, - {0xc78, 0xea560001}, {0xc78, 0xe9570001}, - {0xc78, 0xe8580001}, {0xc78, 0xe7590001}, - {0xc78, 0xe65a0001}, {0xc78, 0xe55b0001}, - {0xc78, 0xe45c0001}, {0xc78, 0xe35d0001}, - {0xc78, 0xe25e0001}, {0xc78, 0xe15f0001}, - {0xc78, 0x8a600001}, {0xc78, 0x89610001}, - {0xc78, 0x88620001}, {0xc78, 0x87630001}, - {0xc78, 0x86640001}, {0xc78, 0x85650001}, - {0xc78, 0x84660001}, {0xc78, 0x83670001}, - {0xc78, 0x82680001}, {0xc78, 0x6b690001}, - {0xc78, 0x6a6a0001}, {0xc78, 0x696b0001}, - {0xc78, 0x686c0001}, {0xc78, 0x676d0001}, - {0xc78, 0x666e0001}, {0xc78, 0x656f0001}, - {0xc78, 0x64700001}, {0xc78, 0x63710001}, - {0xc78, 0x62720001}, {0xc78, 0x61730001}, - {0xc78, 0x49740001}, {0xc78, 0x48750001}, - {0xc78, 0x47760001}, {0xc78, 0x46770001}, - {0xc78, 0x45780001}, {0xc78, 0x44790001}, - {0xc78, 0x437a0001}, {0xc78, 0x427b0001}, - {0xc78, 0x417c0001}, {0xc78, 0x407d0001}, - {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, - {0xc50, 0x00040022}, {0xc50, 0x00040020}, - {0xffff, 0xffffffff} -}; - -static struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_highpa_table[] = { - {0xc78, 0xfa000001}, {0xc78, 0xf9010001}, - {0xc78, 0xf8020001}, {0xc78, 0xf7030001}, - {0xc78, 0xf6040001}, {0xc78, 0xf5050001}, - {0xc78, 0xf4060001}, {0xc78, 0xf3070001}, - {0xc78, 0xf2080001}, {0xc78, 0xf1090001}, - {0xc78, 0xf00a0001}, {0xc78, 0xef0b0001}, - {0xc78, 0xee0c0001}, {0xc78, 0xed0d0001}, - {0xc78, 0xec0e0001}, {0xc78, 0xeb0f0001}, - {0xc78, 0xea100001}, {0xc78, 0xe9110001}, - {0xc78, 0xe8120001}, {0xc78, 0xe7130001}, - {0xc78, 0xe6140001}, {0xc78, 0xe5150001}, - {0xc78, 0xe4160001}, {0xc78, 0xe3170001}, - {0xc78, 0xe2180001}, {0xc78, 0xe1190001}, - {0xc78, 0x8a1a0001}, {0xc78, 0x891b0001}, - {0xc78, 0x881c0001}, {0xc78, 0x871d0001}, - {0xc78, 0x861e0001}, {0xc78, 0x851f0001}, - {0xc78, 0x84200001}, {0xc78, 0x83210001}, - {0xc78, 0x82220001}, {0xc78, 0x6a230001}, - {0xc78, 0x69240001}, {0xc78, 0x68250001}, - {0xc78, 0x67260001}, {0xc78, 0x66270001}, - {0xc78, 0x65280001}, {0xc78, 0x64290001}, - {0xc78, 0x632a0001}, {0xc78, 0x622b0001}, - {0xc78, 0x612c0001}, {0xc78, 0x602d0001}, - {0xc78, 0x472e0001}, {0xc78, 0x462f0001}, - {0xc78, 0x45300001}, {0xc78, 0x44310001}, - {0xc78, 0x43320001}, {0xc78, 0x42330001}, - {0xc78, 0x41340001}, {0xc78, 0x40350001}, - {0xc78, 0x40360001}, {0xc78, 0x40370001}, - {0xc78, 0x40380001}, {0xc78, 0x40390001}, - {0xc78, 0x403a0001}, {0xc78, 0x403b0001}, - {0xc78, 0x403c0001}, {0xc78, 0x403d0001}, - {0xc78, 0x403e0001}, {0xc78, 0x403f0001}, - {0xc78, 0xfa400001}, {0xc78, 0xf9410001}, - {0xc78, 0xf8420001}, {0xc78, 0xf7430001}, - {0xc78, 0xf6440001}, {0xc78, 0xf5450001}, - {0xc78, 0xf4460001}, {0xc78, 0xf3470001}, - {0xc78, 0xf2480001}, {0xc78, 0xf1490001}, - {0xc78, 0xf04a0001}, {0xc78, 0xef4b0001}, - {0xc78, 0xee4c0001}, {0xc78, 0xed4d0001}, - {0xc78, 0xec4e0001}, {0xc78, 0xeb4f0001}, - {0xc78, 0xea500001}, {0xc78, 0xe9510001}, - {0xc78, 0xe8520001}, {0xc78, 0xe7530001}, - {0xc78, 0xe6540001}, {0xc78, 0xe5550001}, - {0xc78, 0xe4560001}, {0xc78, 0xe3570001}, - {0xc78, 0xe2580001}, {0xc78, 0xe1590001}, - {0xc78, 0x8a5a0001}, {0xc78, 0x895b0001}, - {0xc78, 0x885c0001}, {0xc78, 0x875d0001}, - {0xc78, 0x865e0001}, {0xc78, 0x855f0001}, - {0xc78, 0x84600001}, {0xc78, 0x83610001}, - {0xc78, 0x82620001}, {0xc78, 0x6a630001}, - {0xc78, 0x69640001}, {0xc78, 0x68650001}, - {0xc78, 0x67660001}, {0xc78, 0x66670001}, - {0xc78, 0x65680001}, {0xc78, 0x64690001}, - {0xc78, 0x636a0001}, {0xc78, 0x626b0001}, - {0xc78, 0x616c0001}, {0xc78, 0x606d0001}, - {0xc78, 0x476e0001}, {0xc78, 0x466f0001}, - {0xc78, 0x45700001}, {0xc78, 0x44710001}, - {0xc78, 0x43720001}, {0xc78, 0x42730001}, - {0xc78, 0x41740001}, {0xc78, 0x40750001}, - {0xc78, 0x40760001}, {0xc78, 0x40770001}, - {0xc78, 0x40780001}, {0xc78, 0x40790001}, - {0xc78, 0x407a0001}, {0xc78, 0x407b0001}, - {0xc78, 0x407c0001}, {0xc78, 0x407d0001}, - {0xc78, 0x407e0001}, {0xc78, 0x407f0001}, - {0xc50, 0x00040222}, {0xc50, 0x00040220}, - {0xffff, 0xffffffff} -}; - static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, {0x02, 0x00098000}, {0x03, 0x00039c63}, @@ -1582,152 +1282,6 @@ static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { }; #endif -static struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = { - {0x7f, 0x00000082}, {0x81, 0x0003fc00}, - {0x00, 0x00030000}, {0x08, 0x00008400}, - {0x18, 0x00000407}, {0x19, 0x00000012}, - {0x1b, 0x00000064}, {0x1e, 0x00080009}, - {0x1f, 0x00000880}, {0x2f, 0x0001a060}, - {0x3f, 0x00000000}, {0x42, 0x000060c0}, - {0x57, 0x000d0000}, {0x58, 0x000be180}, - {0x67, 0x00001552}, {0x83, 0x00000000}, - {0xb0, 0x000ff9f1}, {0xb1, 0x00055418}, - {0xb2, 0x0008cc00}, {0xb4, 0x00043083}, - {0xb5, 0x00008166}, {0xb6, 0x0000803e}, - {0xb7, 0x0001c69f}, {0xb8, 0x0000407f}, - {0xb9, 0x00080001}, {0xba, 0x00040001}, - {0xbb, 0x00000400}, {0xbf, 0x000c0000}, - {0xc2, 0x00002400}, {0xc3, 0x00000009}, - {0xc4, 0x00040c91}, {0xc5, 0x00099999}, - {0xc6, 0x000000a3}, {0xc7, 0x00088820}, - {0xc8, 0x00076c06}, {0xc9, 0x00000000}, - {0xca, 0x00080000}, {0xdf, 0x00000180}, - {0xef, 0x000001a0}, {0x51, 0x00069545}, - {0x52, 0x0007e45e}, {0x53, 0x00000071}, - {0x56, 0x00051ff3}, {0x35, 0x000000a8}, - {0x35, 0x000001e2}, {0x35, 0x000002a8}, - {0x36, 0x00001c24}, {0x36, 0x00009c24}, - {0x36, 0x00011c24}, {0x36, 0x00019c24}, - {0x18, 0x00000c07}, {0x5a, 0x00048000}, - {0x19, 0x000739d0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x34, 0x0000a093}, {0x34, 0x0000908f}, - {0x34, 0x0000808c}, {0x34, 0x0000704d}, - {0x34, 0x0000604a}, {0x34, 0x00005047}, - {0x34, 0x0000400a}, {0x34, 0x00003007}, - {0x34, 0x00002004}, {0x34, 0x00001001}, - {0x34, 0x00000000}, -#else - /* Regular */ - {0x34, 0x0000add7}, {0x34, 0x00009dd4}, - {0x34, 0x00008dd1}, {0x34, 0x00007dce}, - {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, - {0x34, 0x00004dc5}, {0x34, 0x000034cc}, - {0x34, 0x0000244f}, {0x34, 0x0000144c}, - {0x34, 0x00000014}, -#endif - {0x00, 0x00030159}, - {0x84, 0x00068180}, - {0x86, 0x0000014e}, - {0x87, 0x00048e00}, - {0x8e, 0x00065540}, - {0x8f, 0x00088000}, - {0xef, 0x000020a0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000f07b0}, -#else - {0x3b, 0x000f02b0}, -#endif - {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, - {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, - {0x3b, 0x000a0080}, {0x3b, 0x00090080}, - {0x3b, 0x0008f780}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000787b0}, -#else - {0x3b, 0x00078730}, -#endif - {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, - {0x3b, 0x00040620}, {0x3b, 0x00037090}, - {0x3b, 0x00020080}, {0x3b, 0x0001f060}, - {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, - {0xfe, 0x00000000}, {0x18, 0x0000fc07}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00000001}, {0x1f, 0x00080000}, - {0x00, 0x00033e70}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192eu_radiob_init_table[] = { - {0x7f, 0x00000082}, {0x81, 0x0003fc00}, - {0x00, 0x00030000}, {0x08, 0x00008400}, - {0x18, 0x00000407}, {0x19, 0x00000012}, - {0x1b, 0x00000064}, {0x1e, 0x00080009}, - {0x1f, 0x00000880}, {0x2f, 0x0001a060}, - {0x3f, 0x00000000}, {0x42, 0x000060c0}, - {0x57, 0x000d0000}, {0x58, 0x000be180}, - {0x67, 0x00001552}, {0x7f, 0x00000082}, - {0x81, 0x0003f000}, {0x83, 0x00000000}, - {0xdf, 0x00000180}, {0xef, 0x000001a0}, - {0x51, 0x00069545}, {0x52, 0x0007e42e}, - {0x53, 0x00000071}, {0x56, 0x00051ff3}, - {0x35, 0x000000a8}, {0x35, 0x000001e0}, - {0x35, 0x000002a8}, {0x36, 0x00001ca8}, - {0x36, 0x00009c24}, {0x36, 0x00011c24}, - {0x36, 0x00019c24}, {0x18, 0x00000c07}, - {0x5a, 0x00048000}, {0x19, 0x000739d0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x34, 0x0000a093}, {0x34, 0x0000908f}, - {0x34, 0x0000808c}, {0x34, 0x0000704d}, - {0x34, 0x0000604a}, {0x34, 0x00005047}, - {0x34, 0x0000400a}, {0x34, 0x00003007}, - {0x34, 0x00002004}, {0x34, 0x00001001}, - {0x34, 0x00000000}, -#else - {0x34, 0x0000add7}, {0x34, 0x00009dd4}, - {0x34, 0x00008dd1}, {0x34, 0x00007dce}, - {0x34, 0x00006dcb}, {0x34, 0x00005dc8}, - {0x34, 0x00004dc5}, {0x34, 0x000034cc}, - {0x34, 0x0000244f}, {0x34, 0x0000144c}, - {0x34, 0x00000014}, -#endif - {0x00, 0x00030159}, {0x84, 0x00068180}, - {0x86, 0x000000ce}, {0x87, 0x00048a00}, - {0x8e, 0x00065540}, {0x8f, 0x00088000}, - {0xef, 0x000020a0}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000f07b0}, -#else - {0x3b, 0x000f02b0}, -#endif - - {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0}, - {0x3b, 0x000cf060}, {0x3b, 0x000b0090}, - {0x3b, 0x000a0080}, {0x3b, 0x00090080}, - {0x3b, 0x0008f780}, -#ifdef EXT_PA_8192EU - /* External PA or external LNA */ - {0x3b, 0x000787b0}, -#else - {0x3b, 0x00078730}, -#endif - {0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0}, - {0x3b, 0x00040620}, {0x3b, 0x00037090}, - {0x3b, 0x00020080}, {0x3b, 0x0001f060}, - {0x3b, 0x0000ffb0}, {0xef, 0x000000a0}, - {0x00, 0x00010159}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1e, 0x00000001}, - {0x1f, 0x00080000}, {0x00, 0x00033e70}, - {0xff, 0xffffffff} -}; - static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = { { /* RF_A */ .hssiparm1 = REG_FPGA0_XA_HSSI_PARM1, @@ -1747,7 +1301,7 @@ static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = { }, }; -static const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = { +const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = { REG_OFDM0_XA_RX_IQ_IMBALANCE, REG_OFDM0_XB_RX_IQ_IMBALANCE, REG_OFDM0_ENERGY_CCA_THRES, @@ -1759,7 +1313,7 @@ static const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = { REG_OFDM0_RX_IQ_EXT_ANTA }; -static u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr) +u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr) { struct usb_device *udev = priv->udev; int len; @@ -1779,7 +1333,7 @@ static u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr) return data; } -static u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr) +u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr) { struct usb_device *udev = priv->udev; int len; @@ -1799,7 +1353,7 @@ static u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr) return data; } -static u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr) +u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr) { struct usb_device *udev = priv->udev; int len; @@ -1819,7 +1373,7 @@ static u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr) return data; } -static int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val) +int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val) { struct usb_device *udev = priv->udev; int ret; @@ -1839,7 +1393,7 @@ static int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val) return ret; } -static int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val) +int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val) { struct usb_device *udev = priv->udev; int ret; @@ -1858,7 +1412,7 @@ static int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val) return ret; } -static int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val) +int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val) { struct usb_device *udev = priv->udev; int ret; @@ -1917,8 +1471,8 @@ write_error: return -EAGAIN; } -static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, - enum rtl8xxxu_rfpath path, u8 reg) +u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg) { u32 hssia, val32, retval; @@ -1962,8 +1516,8 @@ static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, * have write issues in high temperature conditions. We may have to * retry writing them. */ -static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, - enum rtl8xxxu_rfpath path, u8 reg, u32 data) +int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, + enum rtl8xxxu_rfpath path, u8 reg, u32 data) { int ret, retval; u32 dataaddr, val32; @@ -2205,7 +1759,7 @@ static int rtl8723a_channel_to_group(int channel) /* * Valid for rtl8723bu and rtl8192eu */ -static int rtl8xxxu_gen2_channel_to_group(int channel) +int rtl8xxxu_gen2_channel_to_group(int channel) { int group; @@ -2345,7 +1899,7 @@ static void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw) } } -static void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw) +void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw) { struct rtl8xxxu_priv *priv = hw->priv; u32 val32, rsr; @@ -2648,82 +2202,6 @@ rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); } -static void -rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) -{ - u32 val32, ofdm, mcs; - u8 cck, ofdmbase, mcsbase; - int group, tx_idx; - - tx_idx = 0; - group = rtl8xxxu_gen2_channel_to_group(channel); - - cck = priv->cck_tx_power_index_A[group]; - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); - val32 &= 0xffff00ff; - val32 |= (cck << 8); - rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_A[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a; - ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_A[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].a; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].a; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs); - - if (priv->tx_paths > 1) { - cck = priv->cck_tx_power_index_B[group]; - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xffffff00; - val32 |= cck; - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_B[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; - ofdm = ofdmbase | ofdmbase << 8 | - ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_B[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs); - } -} - static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv, enum nl80211_iftype linktype) { @@ -3170,77 +2648,6 @@ static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) #endif -static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, - sizeof(efuse->tx_power_index_A.cck_base)); - memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, - sizeof(efuse->tx_power_index_B.cck_base)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->tx_power_index_A.ht40_base, - sizeof(efuse->tx_power_index_A.ht40_base)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->tx_power_index_B.ht40_base, - sizeof(efuse->tx_power_index_B.ht40_base)); - - priv->ht20_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; - priv->ht20_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; - - priv->ht40_tx_power_diff[0].a = 0; - priv->ht40_tx_power_diff[0].b = 0; - - for (i = 1; i < RTL8723B_TX_COUNT; i++) { - priv->ofdm_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; - priv->ofdm_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; - - priv->ht20_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht20; - priv->ht20_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht20; - - priv->ht40_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht40; - priv->ht40_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht40; - } - - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name); - dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8192eu_efuse)); - for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - return 0; -} - static int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) { @@ -3388,7 +2795,7 @@ exit: return ret; } -static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) +void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) { u8 val8; u16 sys_func; @@ -3573,7 +2980,7 @@ fw_abort: return ret; } -static int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) +int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) { struct device *dev = &priv->udev->dev; const struct firmware *fw; @@ -3681,18 +3088,6 @@ static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) #endif -static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - fw_name = "rtlwifi/rtl8192eu_nic.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - - return ret; -} - static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) { u16 val16; @@ -3788,8 +3183,8 @@ rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv) return 0; } -static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_reg32val *array) +int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_reg32val *array) { int i, ret; u16 reg; @@ -3890,33 +3285,6 @@ static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); } -static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - /* 6. 0x1f[7:0] = 0x07 */ - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD | SYS_FUNC_DIO_RF | - SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB); - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table); - - if (priv->hi_pa) - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table); - else - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table); -} - /* * Most of this is black magic retrieved from the old rtl8723au driver */ @@ -4051,9 +3419,9 @@ static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv, return 0; } -static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, - struct rtl8xxxu_rfregval *table, - enum rtl8xxxu_rfpath path) +int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, + struct rtl8xxxu_rfregval *table, + enum rtl8xxxu_rfpath path) { u32 val32; u16 val16, rfsi_rfenv; @@ -4173,20 +3541,6 @@ exit: } #endif -static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A); - if (ret) - goto exit; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B); - -exit: - return ret; -} - static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data) { int ret = -EBUSY; @@ -4239,7 +3593,7 @@ exit: return ret; } -static int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) +int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) { u32 val32; int ret = 0; @@ -4383,9 +3737,8 @@ static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv) return ret; } -static void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, - bool iqk_ok, int result[][8], - int candidate, bool tx_only) +void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, bool iqk_ok, + int result[][8], int candidate, bool tx_only) { u32 oldval, x, tx0_a, reg; int y, tx0_c; @@ -4461,9 +3814,8 @@ static void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32); } -static void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, - bool iqk_ok, int result[][8], - int candidate, bool tx_only) +void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, bool iqk_ok, + int result[][8], int candidate, bool tx_only) { u32 oldval, x, tx1_a, reg; int y, tx1_c; @@ -4595,8 +3947,8 @@ static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv, return false; } -static bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, - int result[][8], int c1, int c2) +bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, + int result[][8], int c1, int c2) { u32 i, j, diff, simubitmap, bound = 0; int candidate[2] = {-1, -1}; /* for path A and path B */ @@ -4680,7 +4032,7 @@ static bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, return false; } -static void +void rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup) { int i; @@ -4691,8 +4043,8 @@ rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup) backup[i] = rtl8xxxu_read32(priv, reg[i]); } -static void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, - const u32 *reg, u32 *backup) +void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, + const u32 *reg, u32 *backup) { int i; @@ -4702,8 +4054,8 @@ static void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv, rtl8xxxu_write32(priv, reg[i], backup[i]); } -static void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, - u32 *backup, int count) +void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count) { int i; @@ -4711,8 +4063,8 @@ static void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs, backup[i] = rtl8xxxu_read32(priv, regs[i]); } -static void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, - u32 *backup, int count) +void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, + u32 *backup, int count) { int i; @@ -4721,8 +4073,8 @@ static void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs, } -static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, - bool path_a_on) +void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, + bool path_a_on) { u32 path_on; int i; @@ -4741,8 +4093,8 @@ static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, rtl8xxxu_write32(priv, regs[i], path_on); } -static void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv, - const u32 *regs, u32 *backup) +void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv, + const u32 *regs, u32 *backup) { int i = 0; @@ -5166,336 +4518,8 @@ out: return result; } -static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_e94, reg_e9c; - int result = 0; - - /* - * TX IQK - * PA/PAD controlled by 0x0 - */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000)) - result |= 0x01; - - return result; -} - -static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; - int result = 0; - - /* Leave IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00); - - /* Enable path A PA in TX IQK mode */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* TX IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000)) { - result |= 0x01; - } else { - /* PA/PAD controlled by 0x0 */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); - goto out; - } - - val32 = 0x80007c00 | - (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* Modify RX IQK mode table */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* IQK setting */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); - - if (!(reg_eac & BIT(27)) && - ((reg_ea4 & 0x03ff0000) != 0x01320000) && - ((reg_eac & 0x03ff0000) != 0x00360000)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", - __func__); - -out: - return result; -} - -static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_eb4, reg_ebc; - int result = 0; - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Path B IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - - if (!(reg_eac & BIT(31)) && - ((reg_eb4 & 0x03ff0000) != 0x01420000) && - ((reg_ebc & 0x03ff0000) != 0x00420000)) - result |= 0x01; - else - dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n", - __func__); - - return result; -} - -static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv) -{ - u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32; - int result = 0; - - /* Leave IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - /* Enable path A PA in TX IQK mode */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* TX IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - - if (!(reg_eac & BIT(31)) && - ((reg_eb4 & 0x03ff0000) != 0x01420000) && - ((reg_ebc & 0x03ff0000) != 0x00420000)) { - result |= 0x01; - } else { - /* - * PA/PAD controlled by 0x0 - * Vendor driver restores RF_A here which I believe is a bug - */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); - goto out; - } - - val32 = 0x80007c00 | - (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* Modify RX IQK mode table */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa); - - /* PA/PAD control by 0x56, and set = 0x0 */ - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); - - /* Enter IQK mode */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* IQK setting */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* Path A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(10); - - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); - reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); - - if (!(reg_eac & BIT(30)) && - ((reg_ec4 & 0x03ff0000) != 0x01320000) && - ((reg_ecc & 0x03ff0000) != 0x00360000)) - result |= 0x02; - else - dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", - __func__); - -out: - return result; -} - -static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) +static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) { struct device *dev = &priv->udev->dev; u32 i, val32; @@ -5907,192 +4931,6 @@ static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, } } -static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok, path_b_ok; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING - }; - u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; - u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt - */ - - if (t == 0) { - /* Save ADDA parameters, turn Path A ADDA on */ - rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - rtl8xxxu_save_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - } - - rtl8xxxu_path_adda_on(priv, adda_regs, true); - - /* MAC settings */ - rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); - - val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); - val32 |= 0x0f000000; - rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); - - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); - rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); - val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); - val32 |= BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); - val32 |= BIT(10); - rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8192eu_iqk_path_a(priv); - if (path_a_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8192eu_rx_iqk_path_a(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_A_2); - result[t][2] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_A_2); - result[t][3] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); - - if (priv->rf_paths > 1) { - /* Path A into standby */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - - /* Turn Path B ADDA on */ - rtl8xxxu_path_adda_on(priv, adda_regs, false); - - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8192eu_iqk_path_b(priv); - if (path_b_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8192eu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_B_2); - result[t][6] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_B_2); - result[t][7] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); - } - - /* Back to BB mode, load original value */ - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); - - if (t) { - /* Reload ADDA power saving parameters */ - rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - - /* Reload MAC parameters */ - rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - - /* Reload BB parameters */ - rtl8xxxu_restore_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - - /* Restore RX initial gain */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); - - if (priv->rf_paths > 1) { - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | xb_agc); - } - - /* Load 0xe30 IQC default value */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); - } -} - static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) { struct h2c_cmd h2c; @@ -6104,114 +4942,10 @@ static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; h2c.bt_wlan_calibration.data = start; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); -} - -static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int result[4][8]; /* last is final result */ - int i, candidate; - bool path_a_ok, path_b_ok; - u32 reg_e94, reg_e9c, reg_ea4, reg_eac; - u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - s32 reg_tmp = 0; - bool simu; - - rtl8xxxu_prepare_calibrate(priv, 1); - - memset(result, 0, sizeof(result)); - candidate = -1; - - path_a_ok = false; - path_b_ok = false; - - rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - - for (i = 0; i < 3; i++) { - rtl8xxxu_phy_iqcalibrate(priv, result, i); - - if (i == 1) { - simu = rtl8xxxu_simularity_compare(priv, result, 0, 1); - if (simu) { - candidate = 0; - break; - } - } - - if (i == 2) { - simu = rtl8xxxu_simularity_compare(priv, result, 0, 2); - if (simu) { - candidate = 0; - break; - } - - simu = rtl8xxxu_simularity_compare(priv, result, 1, 2); - if (simu) { - candidate = 1; - } else { - for (i = 0; i < 8; i++) - reg_tmp += result[3][i]; - - if (reg_tmp) - candidate = 3; - else - candidate = -1; - } - } - } - - for (i = 0; i < 4; i++) { - reg_e94 = result[i][0]; - reg_e9c = result[i][1]; - reg_ea4 = result[i][2]; - reg_eac = result[i][3]; - reg_eb4 = result[i][4]; - reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; - } - - if (candidate >= 0) { - reg_e94 = result[candidate][0]; - priv->rege94 = reg_e94; - reg_e9c = result[candidate][1]; - priv->rege9c = reg_e9c; - reg_ea4 = result[candidate][2]; - reg_eac = result[candidate][3]; - reg_eb4 = result[candidate][4]; - priv->regeb4 = reg_eb4; - reg_ebc = result[candidate][5]; - priv->regebc = reg_ebc; - reg_ec4 = result[candidate][6]; - reg_ecc = result[candidate][7]; - dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); - dev_dbg(dev, - "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " - "ecc=%x\n ", __func__, reg_e94, reg_e9c, - reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); - path_a_ok = true; - path_b_ok = true; - } else { - reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; - reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; - } - - if (reg_e94 && candidate >= 0) - rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, - candidate, (reg_ea4 == 0)); - - if (priv->tx_paths > 1 && reg_eb4) - rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, - candidate, (reg_ec4 == 0)); - - rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - - rtl8xxxu_prepare_calibrate(priv, 0); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); } -static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; int result[4][8]; /* last is final result */ @@ -6219,7 +4953,6 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) bool path_a_ok, path_b_ok; u32 reg_e94, reg_e9c, reg_ea4, reg_eac; u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - u32 val32, bt_control; s32 reg_tmp = 0; bool simu; @@ -6231,14 +4964,13 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) path_a_ok = false; path_b_ok = false; - bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); for (i = 0; i < 3; i++) { - rtl8723bu_phy_iqcalibrate(priv, result, i); + rtl8xxxu_phy_iqcalibrate(priv, result, i); if (i == 1) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 1); + simu = rtl8xxxu_simularity_compare(priv, result, 0, 1); if (simu) { candidate = 0; break; @@ -6246,15 +4978,13 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) } if (i == 2) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 2); + simu = rtl8xxxu_simularity_compare(priv, result, 0, 2); if (simu) { candidate = 0; break; } - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 1, 2); + simu = rtl8xxxu_simularity_compare(priv, result, 1, 2); if (simu) { candidate = 1; } else { @@ -6316,26 +5046,10 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); - val32 |= 0x20; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); - rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); - - if (priv->rf_paths > 1) - dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); - rtl8xxxu_prepare_calibrate(priv, 0); } -static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; int result[4][8]; /* last is final result */ @@ -6343,16 +5057,22 @@ static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) bool path_a_ok, path_b_ok; u32 reg_e94, reg_e9c, reg_ea4, reg_eac; u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + u32 val32, bt_control; + s32 reg_tmp = 0; bool simu; + rtl8xxxu_prepare_calibrate(priv, 1); + memset(result, 0, sizeof(result)); candidate = -1; path_a_ok = false; path_b_ok = false; + bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + for (i = 0; i < 3; i++) { - rtl8192eu_phy_iqcalibrate(priv, result, i); + rtl8723bu_phy_iqcalibrate(priv, result, i); if (i == 1) { simu = rtl8xxxu_gen2_simularity_compare(priv, @@ -6373,10 +5093,17 @@ static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2); - if (simu) + if (simu) { candidate = 1; - else - candidate = 3; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } } } @@ -6420,12 +5147,30 @@ static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, candidate, (reg_ea4 == 0)); - if (priv->rf_paths > 1) + if (priv->tx_paths > 1 && reg_eb4) rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, candidate, (reg_ec4 == 0)); rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); + + if (priv->rf_paths > 1) + dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); + + rtl8xxxu_prepare_calibrate(priv, 0); } static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) @@ -6730,81 +5475,6 @@ static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); } -static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - - /* Clear suspend enable and power down enable*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); -} - -static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* disable HWPDN 0x04[15]=0*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(7); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable SW LPS 0x04[10]= 0 */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(2); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable WL suspend*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* wait till 0x04[17] = 1 power ready*/ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* release WLON reset 0x04[16]= 1*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - -exit: - return ret; -} - static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) { u8 val8; @@ -7111,7 +5781,7 @@ static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv) } } -static void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) { u32 val32; @@ -7331,92 +6001,7 @@ static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) #endif -/* - * This is needed for 8723bu as well, presumable - */ -static void rtl8192e_crystal_afe_adjust(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - - /* - * 40Mhz crystal source, MAC 0x28[2]=0 - */ - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - val8 &= 0xfb; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - - val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); - val32 &= 0xfffffc7f; - rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); - - /* - * 92e AFE parameter - * AFE PLL KVCO selection, MAC 0x28[6]=1 - */ - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - val8 &= 0xbf; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - - /* - * AFE PLL KVCO selection, MAC 0x78[21]=0 - */ - val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4); - val32 &= 0xffdfffff; - rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32); -} - -static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv) -{ - u16 val16; - u32 val32; - int ret; - - ret = 0; - - val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); - if (val32 & SYS_CFG_SPS_LDO_SEL) { - rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3); - } else { - /* - * Raise 1.2V voltage - */ - val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL); - val32 &= 0xff0fffff; - val32 |= 0x00500000; - rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32); - rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83); - } - - /* - * Adjust AFE before enabling PLL - */ - rtl8192e_crystal_afe_adjust(priv); - rtl8192e_disabled_to_emu(priv); - - ret = rtl8192e_emu_to_active(priv); - if (ret) - goto exit; - - rtl8xxxu_write16(priv, REG_CR, 0x0000); - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - -exit: - return ret; -} - -static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) +void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) { u8 val8; u16 val16; @@ -7525,43 +6110,6 @@ static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, } #endif -static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv) -{ - u32 val32; - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); - val8 |= BIT(5); - rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); - - /* - * WLAN action by PTA - */ - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(24); - val32 |= BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - /* - * Fix external switch Main->S1, Aux->S0 - */ - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); -} - static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) { struct h2c_cmd h2c; @@ -7669,7 +6217,7 @@ static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); } -static void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) { u32 val32; @@ -8229,8 +6777,8 @@ static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); } -static void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, int sgi) +void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi) { struct h2c_cmd h2c; u8 bw = 0; @@ -8272,8 +6820,8 @@ static void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); } -static void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, - u8 macid, bool connect) +void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) { struct h2c_cmd h2c; @@ -8973,9 +7521,8 @@ static int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, return RX_TYPE_DATA_PKT; } -static int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, - struct sk_buff *skb, - struct ieee80211_rx_status *rx_status) +int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) { struct rtl8xxxu_rxdesc24 *rx_desc = (struct rtl8xxxu_rxdesc24 *)skb->data; @@ -9986,42 +8533,6 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = { #endif -static struct rtl8xxxu_fileops rtl8192eu_fops = { - .parse_efuse = rtl8192eu_parse_efuse, - .load_firmware = rtl8192eu_load_firmware, - .power_on = rtl8192eu_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_auto_llt_table, - .init_phy_bb = rtl8192eu_init_phy_bb, - .init_phy_rf = rtl8192eu_init_phy_rf, - .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen2_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc24, - .enable_rf = rtl8192e_enable_rf, - .disable_rf = rtl8xxxu_gen2_disable_rf, - .usb_quirks = rtl8xxxu_gen2_usb_quirks, - .set_tx_power = rtl8192e_set_tx_power, - .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, - .report_connect = rtl8xxxu_gen2_report_connect, - .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), - .has_s0s1 = 0, - .adda_1t_init = 0x0fc01616, - .adda_1t_path_on = 0x0fc01616, - .adda_2t_path_on_a = 0x0fc01616, - .adda_2t_path_on_b = 0x0fc01616, - .trxff_boundary = 0x3cff, - .mactable = rtl8192e_mac_init_table, - .total_page_num = TX_TOTAL_PAGE_NUM_8192E, - .page_num_hi = TX_PAGE_NUM_HI_PQ_8192E, - .page_num_lo = TX_PAGE_NUM_LO_PQ_8192E, - .page_num_norm = TX_PAGE_NUM_NORM_PQ_8192E, -}; - static struct usb_device_id dev_table[] = { {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723au_fops}, -- cgit v1.1 From 6c46ca3b5f3b7baeb0385e31cd86a0826ae7b80a Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:07 -0400 Subject: rtl8xxxu: move rtl8723b related code into rtl8xxxu_8723b.c This moves the rtl8723b code into it's own file. This is purely a code moving exercise, no functional changes. This did expose rtl723a_h2c_cmd() as a function that should be refactored into a gen1 and a gen2 version. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/Makefile | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 7 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1684 +++++++++++++++++++ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1754 +------------------- 4 files changed, 1747 insertions(+), 1700 deletions(-) create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index 2b019a6..d27128c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -1,3 +1,3 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o -rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o +rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 945e04e..2807cb5 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1383,9 +1383,15 @@ int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, struct rtl8xxxu_reg32val *array); int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name); +void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv); void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv); void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv); int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); +void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); +int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); +int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); +int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv); +void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw); void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, @@ -1400,3 +1406,4 @@ bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, int result[][8], int c1, int c2); extern struct rtl8xxxu_fileops rtl8192eu_fops; +extern struct rtl8xxxu_fileops rtl8723bu_fops; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c new file mode 100644 index 0000000..7d06dca --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -0,0 +1,1684 @@ +/* + * RTL8XXXU mac80211 USB driver - 8723b specific subdriver + * + * Copyright (c) 2014 - 2016 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { + {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, + {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, + {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, + {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, + {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, + {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, + {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, + {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, + {0x516, 0x0a}, {0x525, 0x4f}, + {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, + {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, + {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, + {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, + {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, + {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, + {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, + {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, + {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, + {0xffff, 0xff}, +}; + +static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00190204}, + {0x828, 0x00000000}, {0x82c, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83c, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84c, 0x00000000}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a11a9}, {0x85c, 0x01000014}, + {0x860, 0x66f60110}, {0x864, 0x061f0649}, + {0x868, 0x00000000}, {0x86c, 0x27272700}, + {0x870, 0x07000760}, {0x874, 0x25004000}, + {0x878, 0x00000808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xccc000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121111}, + {0x910, 0x00000002}, {0x914, 0x00000201}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, + {0xa80, 0x21806490}, {0xb2c, 0x00000000}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, + {0xc58, 0x00013149}, {0xc5c, 0x00250492}, + {0xc60, 0x00000000}, {0xc64, 0x7112848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, + {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0x20200000}, + {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, + {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x000300a0}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00000740}, {0xd04, 0x40020401}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, + {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, + {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, + {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, + {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, + {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, + {0xe70, 0x00c00096}, {0xe74, 0x01000056}, + {0xe78, 0x01000014}, {0xe7c, 0x01000056}, + {0xe80, 0x01000014}, {0xe84, 0x00c00096}, + {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, + {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, + {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, + {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0x820, 0x01000100}, {0x800, 0x83040000}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { + {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, + {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, + {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, + {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, + {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, + {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, + {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, + {0xc78, 0xed100001}, {0xc78, 0xec110001}, + {0xc78, 0xeb120001}, {0xc78, 0xea130001}, + {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, + {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, + {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, + {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, + {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, + {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, + {0xc78, 0x65200001}, {0xc78, 0x64210001}, + {0xc78, 0x63220001}, {0xc78, 0x4a230001}, + {0xc78, 0x49240001}, {0xc78, 0x48250001}, + {0xc78, 0x47260001}, {0xc78, 0x46270001}, + {0xc78, 0x45280001}, {0xc78, 0x44290001}, + {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, + {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, + {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, + {0xc78, 0x0a300001}, {0xc78, 0x09310001}, + {0xc78, 0x08320001}, {0xc78, 0x07330001}, + {0xc78, 0x06340001}, {0xc78, 0x05350001}, + {0xc78, 0x04360001}, {0xc78, 0x03370001}, + {0xc78, 0x02380001}, {0xc78, 0x01390001}, + {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, + {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, + {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, + {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, + {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, + {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, + {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, + {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, + {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, + {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, + {0xc78, 0xec500001}, {0xc78, 0xeb510001}, + {0xc78, 0xea520001}, {0xc78, 0xe9530001}, + {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, + {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, + {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, + {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, + {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, + {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, + {0xc78, 0x65600001}, {0xc78, 0x64610001}, + {0xc78, 0x63620001}, {0xc78, 0x62630001}, + {0xc78, 0x61640001}, {0xc78, 0x48650001}, + {0xc78, 0x47660001}, {0xc78, 0x46670001}, + {0xc78, 0x45680001}, {0xc78, 0x44690001}, + {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, + {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, + {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, + {0xc78, 0x24700001}, {0xc78, 0x09710001}, + {0xc78, 0x08720001}, {0xc78, 0x07730001}, + {0xc78, 0x06740001}, {0xc78, 0x05750001}, + {0xc78, 0x04760001}, {0xc78, 0x03770001}, + {0xc78, 0x02780001}, {0xc78, 0x01790001}, + {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, + {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, + {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, + {0xc50, 0x69553422}, + {0xc50, 0x69553420}, + {0x824, 0x00390204}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { + {0x00, 0x00010000}, {0xb0, 0x000dffe0}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb1, 0x00000018}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb2, 0x00084c00}, + {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, + {0xb7, 0x00000010}, {0xb8, 0x0000907f}, + {0x5c, 0x00000002}, {0x7c, 0x00000002}, + {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, + {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, + {0x1e, 0x00000000}, {0xdf, 0x00000780}, + {0x50, 0x00067435}, + /* + * The 8723bu vendor driver indicates that bit 8 should be set in + * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However + * they never actually check the package type - and just default + * to not setting it. + */ + {0x51, 0x0006b04e}, + {0x52, 0x000007d2}, {0x53, 0x00000000}, + {0x54, 0x00050400}, {0x55, 0x0004026e}, + {0xdd, 0x0000004c}, {0x70, 0x00067435}, + /* + * 0x71 has same package type condition as for register 0x51 + */ + {0x71, 0x0006b04e}, + {0x72, 0x000007d2}, {0x73, 0x00000000}, + {0x74, 0x00050400}, {0x75, 0x0004026e}, + {0xef, 0x00000100}, {0x34, 0x0000add7}, + {0x35, 0x00005c00}, {0x34, 0x00009dd4}, + {0x35, 0x00005000}, {0x34, 0x00008dd1}, + {0x35, 0x00004400}, {0x34, 0x00007dce}, + {0x35, 0x00003800}, {0x34, 0x00006cd1}, + {0x35, 0x00004400}, {0x34, 0x00005cce}, + {0x35, 0x00003800}, {0x34, 0x000048ce}, + {0x35, 0x00004400}, {0x34, 0x000034ce}, + {0x35, 0x00003800}, {0x34, 0x00002451}, + {0x35, 0x00004400}, {0x34, 0x0000144e}, + {0x35, 0x00003800}, {0x34, 0x00000051}, + {0x35, 0x00004400}, {0xef, 0x00000000}, + {0xef, 0x00000100}, {0xed, 0x00000010}, + {0x44, 0x0000add7}, {0x44, 0x00009dd4}, + {0x44, 0x00008dd1}, {0x44, 0x00007dce}, + {0x44, 0x00006cc1}, {0x44, 0x00005cce}, + {0x44, 0x000044d1}, {0x44, 0x000034ce}, + {0x44, 0x00002451}, {0x44, 0x0000144e}, + {0x44, 0x00000051}, {0xef, 0x00000000}, + {0xed, 0x00000000}, {0x7f, 0x00020080}, + {0xef, 0x00002000}, {0x3b, 0x000380ef}, + {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, + {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, + {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, + {0x3b, 0x00000900}, {0xef, 0x00000000}, + {0xed, 0x00000001}, {0x40, 0x000380ef}, + {0x40, 0x000302fe}, {0x40, 0x00028ce6}, + {0x40, 0x000200bc}, {0x40, 0x000188a5}, + {0x40, 0x00010fbc}, {0x40, 0x00008f71}, + {0x40, 0x00000900}, {0xed, 0x00000000}, + {0x82, 0x00080000}, {0x83, 0x00008000}, + {0x84, 0x00048d80}, {0x85, 0x00068000}, + {0xa2, 0x00080000}, {0xa3, 0x00008000}, + {0xa4, 0x00048d80}, {0xa5, 0x00068000}, + {0xed, 0x00000002}, {0xef, 0x00000002}, + {0x56, 0x00000032}, {0x76, 0x00000032}, + {0x01, 0x00000780}, + {0xff, 0xffffffff} +}; + +static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) +{ + struct h2c_cmd h2c; + int reqnum = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.data = data; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + + reqnum++; + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.addr = reg; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); +} + +static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + +static void +rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8xxxu_gen2_channel_to_group(channel); + + cck = priv->cck_tx_power_index_B[group]; + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); +} + +static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ofdm_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; + priv->ofdm_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + int i; + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8723bu_efuse)); + for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + + return 0; +} + +static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723bu_bt.bin"; + else + fw_name = "rtlwifi/rtl8723bu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + +static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* 6. 0x1f[7:0] = 0x07 */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + /* Why? */ + rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); + rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); + rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); + + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); +} + +static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); + /* + * PHY LCK + */ + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); + msleep(200); + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); + + return ret; +} + +static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); + val32 &= ~(BIT(20) | BIT(24)); + rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 &= ~BIT(4); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 |= BIT(3); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= BIT(24); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); + val32 &= 0xffffff00; + val32 |= 0x77; + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); +} + +static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + +out: + return result; +} + +static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | + ((reg_e9c & 0x3ff0000) >> 16); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* + * Modify RX IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); + + /* + * PA, PAD setting + */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); + + /* + * RX IQK setting + */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Disable BT + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); + + val32 = (reg_eac >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000) && + ((reg_ea4 & 0x03ff0000) < 0x01100000) && + ((reg_ea4 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x02; + else /* If TX not OK, ignore RX */ + goto out; +out: + return result; +} + +static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok /*, path_b_ok */; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); + + /* + * RX IQ calibration setting for 8723B D cut large current issue + * when leaving IPS + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->tx_paths > 1) { +#if 1 + dev_warn(dev, "%s: Path B not supported\n", __func__); +#else + + /* + * Path A into standby + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8xxxu_iqk_path_b(priv); + if (path_b_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8723bu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); +#endif + } + + /* Back to BB mode, load original value */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->tx_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + u32 val32, bt_control; + s32 reg_tmp = 0; + bool simu; + + rtl8xxxu_prepare_calibrate(priv, 1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + + for (i = 0; i < 3; i++) { + rtl8723bu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, + result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->tx_paths > 1 && reg_eb4) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); + + if (priv->rf_paths > 1) + dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); + + rtl8xxxu_prepare_calibrate(priv, 0); +} + +static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int count, ret = 0; + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /* Enable rising edge triggering interrupt */ + val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); + val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; + rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* 0x0005[1] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + if ((val8 & BIT(1)) == 0) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", + __func__); + ret = -EBUSY; + goto exit; + } + + /* Enable BT control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 &= ~AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 |= SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 &= ~LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + +exit: + return ret; +} + +static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* Disable SW LPS 0x04[10]= 0 */ + val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_SW_LPS; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Wait until 0x04[17] = 1 power ready */ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable HWPDN 0x04[15]= 0*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_HW_POWERDOWN; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable WL suspend*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* Enable WL control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 |= AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* Enable falling edge triggering interrupt */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); + + /* Enable GPIO9 interrupt mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); + + /* Enable GPIO9 input mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); + + /* Enable HSISR GPIO[C:0] interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_HSIMR, val8); + + /* Enable HSISR GPIO9 interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); + + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); + val8 |= MULTI_WIFI_HW_ROF_EN; + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); + + /* For GPIO9 internal pull high setting BIT(14) */ + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); + val8 |= BIT(6); + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); + +exit: + return ret; +} + +static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + rtl8723a_disabled_to_emu(priv); + + ret = rtl8723b_emu_to_active(priv); + if (ret) + goto exit; + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* + * BT coexist power on settings. This is identical for 1 and 2 + * antenna parts. + */ + rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + /* Antenna inverse */ + rtl8xxxu_write8(priv, 0xfe08, 0x01); + + val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); + val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write16(priv, REG_PWR_DATA, val16); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= LEDCFG0_DPDT_SELECT; + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +exit: + return ret; +} + +static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + rtl8xxxu_flush_fifo(priv); + + /* + * Disable TX report timer + */ + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + + rtl8xxxu_write8(priv, REG_CR, 0x0000); + + rtl8xxxu_active_to_lps(priv); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8723bu_active_to_emu(priv); + + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); +} + +static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) +{ + struct h2c_cmd h2c; + u32 val32; + u8 val8; + + /* + * No indication anywhere as to what 0x0790 does. The 2 antenna + * vendor code preserves bits 6-7 here. + */ + rtl8xxxu_write8(priv, 0x0790, 0x05); + /* + * 0x0778 seems to be related to enabling the number of antennas + * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it + * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 + */ + rtl8xxxu_write8(priv, 0x0778, 0x01); + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); + + rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ + + /* + * Set BT grant to low + */ + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; + h2c.bt_grant.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + + /* + * BT select S0/S1 controlled by WiFi + */ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 |= BIT(5); + rtl8xxxu_write8(priv, 0x0067, val8); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + /* + * Bits 6/7 are marked in/out ... but for what? + */ + rtl8xxxu_write8(priv, 0x0974, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; + h2c.ant_sel_rsv.ant_inverse = 1; + h2c.ant_sel_rsv.int_switch_type = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); + + /* + * 0x280, 0x00, 0x200, 0x80 - not clear + */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* + * Software control, antenna at WiFi side + */ +#ifdef NEED_PS_TDMA + rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); +#endif + + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); + rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_info.cmd = H2C_8723B_BT_INFO; + h2c.bt_info.data = BIT(0); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; + h2c.ignore_wlan.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); +} + +static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) +{ + u32 agg_rx; + u8 agg_ctrl; + + /* + * For now simply disable RX aggregation + */ + agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); + agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; + + agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); + agg_rx &= ~RXDMA_USB_AGG_ENABLE; + agg_rx &= ~0xff0f; + + rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); + rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); +} + +static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + /* Time duration for NHM unit: 4us, 0x2710=40ms */ + rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); + rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); + rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); + rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); + /* TH8 */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 |= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + /* Enable CCK */ + val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); + val32 |= BIT(8) | BIT(9) | BIT(10); + rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); + /* Max power amongst all RX antennas */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); + val32 |= BIT(7); + rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); +} + +struct rtl8xxxu_fileops rtl8723bu_fops = { + .parse_efuse = rtl8723bu_parse_efuse, + .load_firmware = rtl8723bu_load_firmware, + .power_on = rtl8723bu_power_on, + .power_off = rtl8723bu_power_off, + .reset_8051 = rtl8723bu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8723bu_init_phy_bb, + .init_phy_rf = rtl8723bu_init_phy_rf, + .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen2_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .init_aggregation = rtl8723bu_init_aggregation, + .init_statistics = rtl8723bu_init_statistics, + .enable_rf = rtl8723b_enable_rf, + .disable_rf = rtl8xxxu_gen2_disable_rf, + .usb_quirks = rtl8xxxu_gen2_usb_quirks, + .set_tx_power = rtl8723b_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .has_s0s1 = 1, + .adda_1t_init = 0x01c00014, + .adda_1t_path_on = 0x01c00014, + .adda_2t_path_on_a = 0x01c00014, + .adda_2t_path_on_b = 0x01c00014, + .trxff_boundary = 0x3f7f, + .pbp_rx = PBP_PAGE_SIZE_256, + .pbp_tx = PBP_PAGE_SIZE_256, + .mactable = rtl8723b_mac_init_table, +}; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index d97de86..5542a41 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -153,37 +153,6 @@ static struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff}, }; -static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { - {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, - {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, - {0x430, 0x00}, {0x431, 0x00}, - {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, - {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, - {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, - {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, - {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, - {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, - {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, - {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, - {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, - {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, - {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, - {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, - {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, - {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, - {0x516, 0x0a}, {0x525, 0x4f}, - {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, - {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, - {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, - {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, - {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, - {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, - {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, - {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, - {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, - {0xffff, 0xff}, -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_power_base rtl8188r_power_base = { .reg_0e00 = 0x06080808, @@ -350,107 +319,6 @@ static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { {0xffff, 0xffffffff}, }; -static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { - {0x800, 0x80040000}, {0x804, 0x00000003}, - {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, - {0x810, 0x10001331}, {0x814, 0x020c3d10}, - {0x818, 0x02200385}, {0x81c, 0x00000000}, - {0x820, 0x01000100}, {0x824, 0x00190204}, - {0x828, 0x00000000}, {0x82c, 0x00000000}, - {0x830, 0x00000000}, {0x834, 0x00000000}, - {0x838, 0x00000000}, {0x83c, 0x00000000}, - {0x840, 0x00010000}, {0x844, 0x00000000}, - {0x848, 0x00000000}, {0x84c, 0x00000000}, - {0x850, 0x00000000}, {0x854, 0x00000000}, - {0x858, 0x569a11a9}, {0x85c, 0x01000014}, - {0x860, 0x66f60110}, {0x864, 0x061f0649}, - {0x868, 0x00000000}, {0x86c, 0x27272700}, - {0x870, 0x07000760}, {0x874, 0x25004000}, - {0x878, 0x00000808}, {0x87c, 0x00000000}, - {0x880, 0xb0000c1c}, {0x884, 0x00000001}, - {0x888, 0x00000000}, {0x88c, 0xccc000c0}, - {0x890, 0x00000800}, {0x894, 0xfffffffe}, - {0x898, 0x40302010}, {0x89c, 0x00706050}, - {0x900, 0x00000000}, {0x904, 0x00000023}, - {0x908, 0x00000000}, {0x90c, 0x81121111}, - {0x910, 0x00000002}, {0x914, 0x00000201}, - {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, - {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, - {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, - {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, - {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, - {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, - {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, - {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, - {0xa80, 0x21806490}, {0xb2c, 0x00000000}, - {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, - {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, - {0xc10, 0x08800000}, {0xc14, 0x40000100}, - {0xc18, 0x08800000}, {0xc1c, 0x40000100}, - {0xc20, 0x00000000}, {0xc24, 0x00000000}, - {0xc28, 0x00000000}, {0xc2c, 0x00000000}, - {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, - {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, - {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, - {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, - {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, - {0xc58, 0x00013149}, {0xc5c, 0x00250492}, - {0xc60, 0x00000000}, {0xc64, 0x7112848b}, - {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, - {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, - {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, - {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, - {0xc88, 0x40000100}, {0xc8c, 0x20200000}, - {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, - {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, - {0xca0, 0x00000000}, {0xca4, 0x000300a0}, - {0xca8, 0x00000000}, {0xcac, 0x00000000}, - {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, - {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, - {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, - {0xcc8, 0x00000000}, {0xccc, 0x00000000}, - {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, - {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, - {0xce0, 0x00222222}, {0xce4, 0x00000000}, - {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, - {0xd00, 0x00000740}, {0xd04, 0x40020401}, - {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, - {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, - {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, - {0xd30, 0x00000000}, {0xd34, 0x80608000}, - {0xd38, 0x00000000}, {0xd3c, 0x00127353}, - {0xd40, 0x00000000}, {0xd44, 0x00000000}, - {0xd48, 0x00000000}, {0xd4c, 0x00000000}, - {0xd50, 0x6437140a}, {0xd54, 0x00000000}, - {0xd58, 0x00000282}, {0xd5c, 0x30032064}, - {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, - {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, - {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, - {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, - {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, - {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, - {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, - {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, - {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, - {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, - {0xe44, 0x01004800}, {0xe48, 0xfb000000}, - {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, - {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, - {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, - {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, - {0xe70, 0x00c00096}, {0xe74, 0x01000056}, - {0xe78, 0x01000014}, {0xe7c, 0x01000056}, - {0xe80, 0x01000014}, {0xe84, 0x00c00096}, - {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, - {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, - {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, - {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, - {0xf14, 0x00000003}, {0xf4c, 0x00000000}, - {0xf00, 0x00000300}, - {0x820, 0x01000100}, {0x800, 0x83040000}, - {0xffff, 0xffffffff}, -}; - static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = { {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, {0x800, 0x80040002}, {0x804, 0x00000003}, @@ -816,77 +684,6 @@ static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { {0xffff, 0xffffffff} }; -static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { - {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, - {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, - {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, - {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, - {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, - {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, - {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, - {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, - {0xc78, 0xed100001}, {0xc78, 0xec110001}, - {0xc78, 0xeb120001}, {0xc78, 0xea130001}, - {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, - {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, - {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, - {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, - {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, - {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, - {0xc78, 0x65200001}, {0xc78, 0x64210001}, - {0xc78, 0x63220001}, {0xc78, 0x4a230001}, - {0xc78, 0x49240001}, {0xc78, 0x48250001}, - {0xc78, 0x47260001}, {0xc78, 0x46270001}, - {0xc78, 0x45280001}, {0xc78, 0x44290001}, - {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, - {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, - {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, - {0xc78, 0x0a300001}, {0xc78, 0x09310001}, - {0xc78, 0x08320001}, {0xc78, 0x07330001}, - {0xc78, 0x06340001}, {0xc78, 0x05350001}, - {0xc78, 0x04360001}, {0xc78, 0x03370001}, - {0xc78, 0x02380001}, {0xc78, 0x01390001}, - {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, - {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, - {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, - {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, - {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, - {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, - {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, - {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, - {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, - {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, - {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, - {0xc78, 0xec500001}, {0xc78, 0xeb510001}, - {0xc78, 0xea520001}, {0xc78, 0xe9530001}, - {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, - {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, - {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, - {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, - {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, - {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, - {0xc78, 0x65600001}, {0xc78, 0x64610001}, - {0xc78, 0x63620001}, {0xc78, 0x62630001}, - {0xc78, 0x61640001}, {0xc78, 0x48650001}, - {0xc78, 0x47660001}, {0xc78, 0x46670001}, - {0xc78, 0x45680001}, {0xc78, 0x44690001}, - {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, - {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, - {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, - {0xc78, 0x24700001}, {0xc78, 0x09710001}, - {0xc78, 0x08720001}, {0xc78, 0x07730001}, - {0xc78, 0x06740001}, {0xc78, 0x05750001}, - {0xc78, 0x04760001}, {0xc78, 0x03770001}, - {0xc78, 0x02780001}, {0xc78, 0x01790001}, - {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, - {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, - {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, - {0xc50, 0x69553422}, - {0xc50, 0x69553420}, - {0x824, 0x00390204}, - {0xffff, 0xffffffff} -}; - static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, {0x02, 0x00098000}, {0x03, 0x00039c63}, @@ -962,75 +759,6 @@ static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { {0xff, 0xffffffff} }; -static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { - {0x00, 0x00010000}, {0xb0, 0x000dffe0}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xb1, 0x00000018}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0xb2, 0x00084c00}, - {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, - {0xb7, 0x00000010}, {0xb8, 0x0000907f}, - {0x5c, 0x00000002}, {0x7c, 0x00000002}, - {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, - {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, - {0x1e, 0x00000000}, {0xdf, 0x00000780}, - {0x50, 0x00067435}, - /* - * The 8723bu vendor driver indicates that bit 8 should be set in - * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However - * they never actually check the package type - and just default - * to not setting it. - */ - {0x51, 0x0006b04e}, - {0x52, 0x000007d2}, {0x53, 0x00000000}, - {0x54, 0x00050400}, {0x55, 0x0004026e}, - {0xdd, 0x0000004c}, {0x70, 0x00067435}, - /* - * 0x71 has same package type condition as for register 0x51 - */ - {0x71, 0x0006b04e}, - {0x72, 0x000007d2}, {0x73, 0x00000000}, - {0x74, 0x00050400}, {0x75, 0x0004026e}, - {0xef, 0x00000100}, {0x34, 0x0000add7}, - {0x35, 0x00005c00}, {0x34, 0x00009dd4}, - {0x35, 0x00005000}, {0x34, 0x00008dd1}, - {0x35, 0x00004400}, {0x34, 0x00007dce}, - {0x35, 0x00003800}, {0x34, 0x00006cd1}, - {0x35, 0x00004400}, {0x34, 0x00005cce}, - {0x35, 0x00003800}, {0x34, 0x000048ce}, - {0x35, 0x00004400}, {0x34, 0x000034ce}, - {0x35, 0x00003800}, {0x34, 0x00002451}, - {0x35, 0x00004400}, {0x34, 0x0000144e}, - {0x35, 0x00003800}, {0x34, 0x00000051}, - {0x35, 0x00004400}, {0xef, 0x00000000}, - {0xef, 0x00000100}, {0xed, 0x00000010}, - {0x44, 0x0000add7}, {0x44, 0x00009dd4}, - {0x44, 0x00008dd1}, {0x44, 0x00007dce}, - {0x44, 0x00006cc1}, {0x44, 0x00005cce}, - {0x44, 0x000044d1}, {0x44, 0x000034ce}, - {0x44, 0x00002451}, {0x44, 0x0000144e}, - {0x44, 0x00000051}, {0xef, 0x00000000}, - {0xed, 0x00000000}, {0x7f, 0x00020080}, - {0xef, 0x00002000}, {0x3b, 0x000380ef}, - {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, - {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, - {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, - {0x3b, 0x00000900}, {0xef, 0x00000000}, - {0xed, 0x00000001}, {0x40, 0x000380ef}, - {0x40, 0x000302fe}, {0x40, 0x00028ce6}, - {0x40, 0x000200bc}, {0x40, 0x000188a5}, - {0x40, 0x00010fbc}, {0x40, 0x00008f71}, - {0x40, 0x00000900}, {0xed, 0x00000000}, - {0x82, 0x00080000}, {0x83, 0x00008000}, - {0x84, 0x00048d80}, {0x85, 0x00068000}, - {0xa2, 0x00080000}, {0xa3, 0x00008000}, - {0xa4, 0x00048d80}, {0xa5, 0x00068000}, - {0xed, 0x00000002}, {0xef, 0x00000002}, - {0x56, 0x00000032}, {0x76, 0x00000032}, - {0x01, 0x00000780}, - {0xff, 0xffffffff} -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, @@ -1553,8 +1281,7 @@ int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, return retval; } -static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, - struct h2c_cmd *h2c, int len) +int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) { struct device *dev = &priv->udev->dev; int mbox_nr, retry, retval = 0; @@ -1613,27 +1340,6 @@ error: return retval; } -static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) -{ - struct h2c_cmd h2c; - int reqnum = 0; - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; - h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); - h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; - h2c.bt_mp_oper.data = data; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); - - reqnum++; - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; - h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); - h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; - h2c.bt_mp_oper.addr = reg; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); -} - static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) { u8 val8; @@ -2163,45 +1869,6 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) } } -static void -rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) -{ - u32 val32, ofdm, mcs; - u8 cck, ofdmbase, mcsbase; - int group, tx_idx; - - tx_idx = 0; - group = rtl8xxxu_gen2_channel_to_group(channel); - - cck = priv->cck_tx_power_index_B[group]; - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); - val32 &= 0xffff00ff; - val32 |= (cck << 8); - rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); - - val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); - val32 &= 0xff; - val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); - rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); - - ofdmbase = priv->ht40_1s_tx_power_index_B[group]; - ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; - ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); - rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); - - mcsbase = priv->ht40_1s_tx_power_index_B[group]; - if (ht40) - mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; - else - mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; - mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; - - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); - rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); -} - static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv, enum nl80211_iftype linktype) { @@ -2494,83 +2161,6 @@ static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) return 0; } -static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, - sizeof(efuse->tx_power_index_A.cck_base)); - memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, - sizeof(efuse->tx_power_index_B.cck_base)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->tx_power_index_A.ht40_base, - sizeof(efuse->tx_power_index_A.ht40_base)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->tx_power_index_B.ht40_base, - sizeof(efuse->tx_power_index_B.ht40_base)); - - priv->ofdm_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; - priv->ofdm_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; - - priv->ht20_tx_power_diff[0].a = - efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; - priv->ht20_tx_power_diff[0].b = - efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; - - priv->ht40_tx_power_diff[0].a = 0; - priv->ht40_tx_power_diff[0].b = 0; - - for (i = 1; i < RTL8723B_TX_COUNT; i++) { - priv->ofdm_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; - priv->ofdm_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; - - priv->ht20_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht20; - priv->ht20_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht20; - - priv->ht40_tx_power_diff[i].a = - efuse->tx_power_index_A.pwr_diff[i - 1].ht40; - priv->ht40_tx_power_diff[i].b = - efuse->tx_power_index_B.pwr_diff[i - 1].ht40; - } - - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - int i; - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8723bu_efuse)); - for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - - return 0; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) @@ -2816,35 +2406,6 @@ void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); } -static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 sys_func; - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); - sys_func &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); - - val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); - - sys_func |= SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); -} - static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; @@ -3053,20 +2614,6 @@ static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) return ret; } -static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - if (priv->enable_bluetooth) - fw_name = "rtlwifi/rtl8723bu_bt.bin"; - else - fw_name = "rtlwifi/rtl8723bu_nic.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) @@ -3088,7 +2635,7 @@ static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) #endif -static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) +void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) { u16 val16; int i = 100; @@ -3115,44 +2662,6 @@ static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) } } -static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); - val32 &= ~(BIT(20) | BIT(24)); - rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); - - val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); - val32 &= ~BIT(4); - rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); - - val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); - val32 |= BIT(3); - rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 |= BIT(24); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); - val32 &= 0xffffff00; - val32 |= 0x77; - rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); -} - static int rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv) { @@ -3262,29 +2771,6 @@ static void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32); } -static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - - /* 6. 0x1f[7:0] = 0x07 */ - val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; - rtl8xxxu_write8(priv, REG_RF_CTRL, val8); - - /* Why? */ - rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); - rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); - rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); - - rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); -} - /* * Most of this is black magic retrieved from the old rtl8723au driver */ @@ -3499,22 +2985,6 @@ static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv) return ret; } -static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); - /* - * PHY LCK - */ - rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); - msleep(200); - rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); - - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) { @@ -4199,356 +3669,37 @@ out: return result; } -static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) +static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) { - u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; - int result = 0; - - path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * Enable path A PA in TX IQK mode - */ - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok, path_b_ok; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; /* - * Tx IQK setting - */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * The vendor driver indicates the USB module is always using - * S0S1 path 1 for the 8723bu. This may be different for 8192eu - */ - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. - * No trace of this in the 8192eu or 8188eu vendor drivers. - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - val32 = (reg_e9c >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000) && - ((reg_e94 & 0x03ff0000) < 0x01100000) && - ((reg_e94 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x01; - else /* If TX not OK, ignore RX */ - goto out; - -out: - return result; -} - -static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) -{ - u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; - int result = 0; - - path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * Enable path A PA in TX IQK mode - */ - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); - - /* - * Tx IQK setting - */ - rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* - * The vendor driver indicates the USB module is always using - * S0S1 path 1 for the 8723bu. This may be different for 8192eu - */ - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. - * No trace of this in the 8192eu or 8188eu vendor drivers. - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); - reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); - - val32 = (reg_e9c >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(28)) && - ((reg_e94 & 0x03ff0000) != 0x01420000) && - ((reg_e9c & 0x03ff0000) != 0x00420000) && - ((reg_e94 & 0x03ff0000) < 0x01100000) && - ((reg_e94 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x01; - else /* If TX not OK, ignore RX */ - goto out; - - val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | - ((reg_e9c & 0x3ff0000) >> 16); - rtl8xxxu_write32(priv, REG_TX_IQK, val32); - - /* - * Modify RX IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); - - /* - * PA, PAD setting - */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); - - /* - * RX IQK setting - */ - rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); - - /* path-A IQK setting */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); - - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); - - /* LO calibration setting */ - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); - - /* - * Enter IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - if (priv->rf_paths > 1) - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); - else - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); - - /* - * Disable BT - */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); - - /* One shot, path A LOK & IQK */ - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); - - mdelay(1); - - /* Restore Ant Path */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); -#ifdef RTL8723BU_BT - /* GNT_BT = 1 */ - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); -#endif - - /* - * Leave IQK mode - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Check failed */ - reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); - reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); - - val32 = (reg_eac >> 16) & 0x3ff; - if (val32 & 0x200) - val32 = 0x400 - val32; - - if (!(reg_eac & BIT(27)) && - ((reg_ea4 & 0x03ff0000) != 0x01320000) && - ((reg_eac & 0x03ff0000) != 0x00360000) && - ((reg_ea4 & 0x03ff0000) < 0x01100000) && - ((reg_ea4 & 0x03ff0000) > 0x00f00000) && - val32 < 0xf) - result |= 0x02; - else /* If TX not OK, ignore RX */ - goto out; -out: - return result; -} - -static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok, path_b_ok; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE - }; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt */ if (t == 0) { @@ -4723,215 +3874,7 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, } } -static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, - int result[][8], int t) -{ - struct device *dev = &priv->udev->dev; - u32 i, val32; - int path_a_ok /*, path_b_ok */; - int retry = 2; - const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { - REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, - REG_RX_WAIT_CCA, REG_TX_CCK_RFON, - REG_TX_CCK_BBON, REG_TX_OFDM_RFON, - REG_TX_OFDM_BBON, REG_TX_TO_RX, - REG_TX_TO_TX, REG_RX_CCK, - REG_RX_OFDM, REG_RX_WAIT_RIFS, - REG_RX_TO_RX, REG_STANDBY, - REG_SLEEP, REG_PMPD_ANAEN - }; - const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { - REG_TXPAUSE, REG_BEACON_CTRL, - REG_BEACON_CTRL_1, REG_GPIO_MUXCFG - }; - const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { - REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, - REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, - REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, - REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE - }; - u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; - u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; - - /* - * Note: IQ calibration must be performed after loading - * PHY_REG.txt , and radio_a, radio_b.txt - */ - - if (t == 0) { - /* Save ADDA parameters, turn Path A ADDA on */ - rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - rtl8xxxu_save_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - } - - rtl8xxxu_path_adda_on(priv, adda_regs, true); - - /* MAC settings */ - rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); - - val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); - val32 |= 0x0f000000; - rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); - - rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); - rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); - - /* - * RX IQ calibration setting for 8723B D cut large current issue - * when leaving IPS - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); - val32 |= 0x20; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8723bu_iqk_path_a(priv); - if (path_a_ok == 0x01) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_BEFORE_IQK_A); - result[t][0] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_TX_POWER_AFTER_IQK_A); - result[t][1] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_a_ok = rtl8723bu_rx_iqk_path_a(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_A_2); - result[t][2] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_A_2); - result[t][3] = (val32 >> 16) & 0x3ff; - - break; - } - } - - if (!path_a_ok) - dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); - - if (priv->tx_paths > 1) { -#if 1 - dev_warn(dev, "%s: Path B not supported\n", __func__); -#else - - /* - * Path A into standby - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); - - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - val32 |= 0x80800000; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - /* Turn Path B ADDA on */ - rtl8xxxu_path_adda_on(priv, adda_regs, false); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8xxxu_iqk_path_b(priv); - if (path_b_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); - result[t][4] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); - result[t][5] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); - - for (i = 0; i < retry; i++) { - path_b_ok = rtl8723bu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_BEFORE_IQK_B_2); - result[t][6] = (val32 >> 16) & 0x3ff; - val32 = rtl8xxxu_read32(priv, - REG_RX_POWER_AFTER_IQK_B_2); - result[t][7] = (val32 >> 16) & 0x3ff; - break; - } - } - - if (!path_b_ok) - dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); -#endif - } - - /* Back to BB mode, load original value */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 &= 0x000000ff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - - if (t) { - /* Reload ADDA power saving parameters */ - rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, - RTL8XXXU_ADDA_REGS); - - /* Reload MAC parameters */ - rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); - - /* Reload BB parameters */ - rtl8xxxu_restore_regs(priv, iqk_bb_regs, - priv->bb_backup, RTL8XXXU_BB_REGS); - - /* Restore RX initial gain */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); - - if (priv->tx_paths > 1) { - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); - val32 &= 0xffffff00; - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | 0x50); - rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, - val32 | xb_agc); - } - - /* Load 0xe30 IQC default value */ - rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); - rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); - } -} - -static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) +void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) { struct h2c_cmd h2c; @@ -5049,130 +3992,6 @@ static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_prepare_calibrate(priv, 0); } -static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) -{ - struct device *dev = &priv->udev->dev; - int result[4][8]; /* last is final result */ - int i, candidate; - bool path_a_ok, path_b_ok; - u32 reg_e94, reg_e9c, reg_ea4, reg_eac; - u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; - u32 val32, bt_control; - s32 reg_tmp = 0; - bool simu; - - rtl8xxxu_prepare_calibrate(priv, 1); - - memset(result, 0, sizeof(result)); - candidate = -1; - - path_a_ok = false; - path_b_ok = false; - - bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); - - for (i = 0; i < 3; i++) { - rtl8723bu_phy_iqcalibrate(priv, result, i); - - if (i == 1) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 1); - if (simu) { - candidate = 0; - break; - } - } - - if (i == 2) { - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 0, 2); - if (simu) { - candidate = 0; - break; - } - - simu = rtl8xxxu_gen2_simularity_compare(priv, - result, 1, 2); - if (simu) { - candidate = 1; - } else { - for (i = 0; i < 8; i++) - reg_tmp += result[3][i]; - - if (reg_tmp) - candidate = 3; - else - candidate = -1; - } - } - } - - for (i = 0; i < 4; i++) { - reg_e94 = result[i][0]; - reg_e9c = result[i][1]; - reg_ea4 = result[i][2]; - reg_eac = result[i][3]; - reg_eb4 = result[i][4]; - reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; - } - - if (candidate >= 0) { - reg_e94 = result[candidate][0]; - priv->rege94 = reg_e94; - reg_e9c = result[candidate][1]; - priv->rege9c = reg_e9c; - reg_ea4 = result[candidate][2]; - reg_eac = result[candidate][3]; - reg_eb4 = result[candidate][4]; - priv->regeb4 = reg_eb4; - reg_ebc = result[candidate][5]; - priv->regebc = reg_ebc; - reg_ec4 = result[candidate][6]; - reg_ecc = result[candidate][7]; - dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); - dev_dbg(dev, - "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " - "ecc=%x\n ", __func__, reg_e94, reg_e9c, - reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); - path_a_ok = true; - path_b_ok = true; - } else { - reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; - reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; - } - - if (reg_e94 && candidate >= 0) - rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, - candidate, (reg_ea4 == 0)); - - if (priv->tx_paths > 1 && reg_eb4) - rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, - candidate, (reg_ec4 == 0)); - - rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - - rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); - - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); - val32 |= 0x80000; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); - val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); - val32 |= 0x20; - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); - rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); - - if (priv->rf_paths > 1) - dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); - - rtl8xxxu_prepare_calibrate(priv, 0); -} - static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) { u32 val32; @@ -5274,92 +4093,39 @@ rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor) for (i = 0; i < 4; i++) { if ((vals[i] & 0xf0) > (ampdu_factor << 4)) - vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4); - - if ((vals[i] & 0x0f) > ampdu_factor) - vals[i] = (vals[i] & 0xf0) | ampdu_factor; - - rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]); - } -} - -static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density) -{ - u8 val8; - - val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE); - val8 &= 0xf8; - val8 |= density; - rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8); -} - -static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv) -{ - u8 val8; - int count, ret = 0; - - /* Start of rtl8723AU_card_enable_flow */ - /* Act to Cardemu sequence*/ - /* Turn off RF */ - rtl8xxxu_write8(priv, REG_RF_CTRL, 0); - - /* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */ - val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); - val8 &= ~LEDCFG2_DPDT_SELECT; - rtl8xxxu_write8(priv, REG_LEDCFG2, val8); - - /* 0x0005[1] = 1 turn off MAC by HW state machine*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - if ((val8 & BIT(1)) == 0) - break; - udelay(10); - } - - if (!count) { - dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", - __func__); - ret = -EBUSY; - goto exit; - } + vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4); - /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 |= SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + if ((vals[i] & 0x0f) > ampdu_factor) + vals[i] = (vals[i] & 0xf0) | ampdu_factor; - /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 &= ~LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]); + } +} -exit: - return ret; +static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density) +{ + u8 val8; + + val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE); + val8 &= 0xf8; + val8 |= density; + rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8); } -static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) +static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv) { u8 val8; - u16 val16; - u32 val32; int count, ret = 0; + /* Start of rtl8723AU_card_enable_flow */ + /* Act to Cardemu sequence*/ /* Turn off RF */ rtl8xxxu_write8(priv, REG_RF_CTRL, 0); - /* Enable rising edge triggering interrupt */ - val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); - val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; - rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); - - /* Release WLON reset 0x04[16]= 1*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_WLON_RESET; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + /* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */ + val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); + val8 &= ~LEDCFG2_DPDT_SELECT; + rtl8xxxu_write8(priv, REG_LEDCFG2, val8); /* 0x0005[1] = 1 turn off MAC by HW state machine*/ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); @@ -5380,11 +4146,6 @@ static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) goto exit; } - /* Enable BT control XTAL setting */ - val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); - val8 &= ~AFE_MISC_WL_XTAL_CTRL; - rtl8xxxu_write8(priv, REG_AFE_MISC, val8); - /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); val8 |= SYS_ISO_ANALOG_IPS; @@ -5399,7 +4160,7 @@ exit: return ret; } -static int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv) +int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv) { u8 val8; u8 val32; @@ -5455,7 +4216,7 @@ exit: return ret; } -static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) +void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) { u8 val8; @@ -5567,127 +4328,6 @@ exit: return ret; } -static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 |= LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - - /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 &= ~BIT(4); - rtl8xxxu_write8(priv, 0x0067, val8); - - mdelay(1); - - /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* Disable SW LPS 0x04[10]= 0 */ - val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); - val32 &= ~APS_FSMCO_SW_LPS; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Wait until 0x04[17] = 1 power ready */ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* Release WLON reset 0x04[16]= 1*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_WLON_RESET; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Disable HWPDN 0x04[15]= 0*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 &= ~APS_FSMCO_HW_POWERDOWN; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Disable WL suspend*/ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - /* Set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* Enable WL control XTAL setting */ - val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); - val8 |= AFE_MISC_WL_XTAL_CTRL; - rtl8xxxu_write8(priv, REG_AFE_MISC, val8); - - /* Enable falling edge triggering interrupt */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); - - /* Enable GPIO9 interrupt mode */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); - - /* Enable GPIO9 input mode */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); - val8 &= ~BIT(1); - rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); - - /* Enable HSISR GPIO[C:0] interrupt */ - val8 = rtl8xxxu_read8(priv, REG_HSIMR); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_HSIMR, val8); - - /* Enable HSISR GPIO9 interrupt */ - val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); - val8 |= BIT(1); - rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); - - val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); - val8 |= MULTI_WIFI_HW_ROF_EN; - rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); - - /* For GPIO9 internal pull high setting BIT(14) */ - val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); - val8 |= BIT(6); - rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); - -exit: - return ret; -} - static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) { u8 val8; @@ -5713,7 +4353,7 @@ static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) return 0; } -static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) +int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; u32 val32; @@ -5836,62 +4476,6 @@ exit: return ret; } -static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int ret; - - rtl8723a_disabled_to_emu(priv); - - ret = rtl8723b_emu_to_active(priv); - if (ret) - goto exit; - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - - /* - * BT coexist power on settings. This is identical for 1 and 2 - * antenna parts. - */ - rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); - - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - /* Antenna inverse */ - rtl8xxxu_write8(priv, 0xfe08, 0x01); - - val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); - val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write16(priv, REG_PWR_DATA, val16); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 |= LEDCFG0_DPDT_SELECT; - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); -exit: - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) @@ -6051,48 +4635,6 @@ void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e); } -static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - - rtl8xxxu_flush_fifo(priv); - - /* - * Disable TX report timer - */ - val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); - val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); - - rtl8xxxu_write8(priv, REG_CR, 0x0000); - - rtl8xxxu_active_to_lps(priv); - - /* Reset Firmware if running in RAM */ - if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) - rtl8xxxu_firmware_self_reset(priv); - - /* Reset MCU */ - val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - val16 &= ~SYS_FUNC_CPU_ENABLE; - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - - /* Reset MCU ready status */ - rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); - - rtl8723bu_active_to_emu(priv); - - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ - val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); -} - #ifdef NEED_PS_TDMA static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5) @@ -6110,113 +4652,6 @@ static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, } #endif -static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) -{ - struct h2c_cmd h2c; - u32 val32; - u8 val8; - - /* - * No indication anywhere as to what 0x0790 does. The 2 antenna - * vendor code preserves bits 6-7 here. - */ - rtl8xxxu_write8(priv, 0x0790, 0x05); - /* - * 0x0778 seems to be related to enabling the number of antennas - * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it - * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 - */ - rtl8xxxu_write8(priv, 0x0778, 0x01); - - val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); - val8 |= BIT(5); - rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); - - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); - - rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ - - /* - * Set BT grant to low - */ - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; - h2c.bt_grant.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); - - /* - * WLAN action by PTA - */ - rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); - - /* - * BT select S0/S1 controlled by WiFi - */ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 |= BIT(5); - rtl8xxxu_write8(priv, 0x0067, val8); - - val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); - val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; - rtl8xxxu_write32(priv, REG_PWR_DATA, val32); - - /* - * Bits 6/7 are marked in/out ... but for what? - */ - rtl8xxxu_write8(priv, 0x0974, 0xff); - - val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); - val32 |= (BIT(0) | BIT(1)); - rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - - rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); - - val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); - val32 &= ~BIT(24); - val32 |= BIT(23); - rtl8xxxu_write32(priv, REG_LEDCFG0, val32); - - /* - * Fix external switch Main->S1, Aux->S0 - */ - val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); - val8 &= ~BIT(0); - rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; - h2c.ant_sel_rsv.ant_inverse = 1; - h2c.ant_sel_rsv.int_switch_type = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); - - /* - * 0x280, 0x00, 0x200, 0x80 - not clear - */ - rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); - - /* - * Software control, antenna at WiFi side - */ -#ifdef NEED_PS_TDMA - rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); -#endif - - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); - rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.bt_info.cmd = H2C_8723B_BT_INFO; - h2c.bt_info.data = BIT(0); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); - - memset(&h2c, 0, sizeof(struct h2c_cmd)); - h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; - h2c.ignore_wlan.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); -} - void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) { u32 val32; @@ -6226,48 +4661,6 @@ void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); } -static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) -{ - u32 agg_rx; - u8 agg_ctrl; - - /* - * For now simply disable RX aggregation - */ - agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); - agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; - - agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); - agg_rx &= ~RXDMA_USB_AGG_ENABLE; - agg_rx &= ~0xff0f; - - rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); - rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); -} - -static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) -{ - u32 val32; - - /* Time duration for NHM unit: 4us, 0x2710=40ms */ - rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); - rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); - rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); - rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); - /* TH8 */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); - val32 |= 0xff; - rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); - /* Enable CCK */ - val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); - val32 |= BIT(8) | BIT(9) | BIT(10); - rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); - /* Max power amongst all RX antennas */ - val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); - val32 |= BIT(7); - rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); -} - static void rtl8xxxu_old_init_queue_reserved_page(struct rtl8xxxu_priv *priv) { u8 val8; @@ -8459,43 +6852,6 @@ static struct rtl8xxxu_fileops rtl8723au_fops = { .mactable = rtl8xxxu_gen1_mac_init_table, }; -static struct rtl8xxxu_fileops rtl8723bu_fops = { - .parse_efuse = rtl8723bu_parse_efuse, - .load_firmware = rtl8723bu_load_firmware, - .power_on = rtl8723bu_power_on, - .power_off = rtl8723bu_power_off, - .reset_8051 = rtl8723bu_reset_8051, - .llt_init = rtl8xxxu_auto_llt_table, - .init_phy_bb = rtl8723bu_init_phy_bb, - .init_phy_rf = rtl8723bu_init_phy_rf, - .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, - .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen2_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc24, - .init_aggregation = rtl8723bu_init_aggregation, - .init_statistics = rtl8723bu_init_statistics, - .enable_rf = rtl8723b_enable_rf, - .disable_rf = rtl8xxxu_gen2_disable_rf, - .usb_quirks = rtl8xxxu_gen2_usb_quirks, - .set_tx_power = rtl8723b_set_tx_power, - .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, - .report_connect = rtl8xxxu_gen2_report_connect, - .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), - .has_s0s1 = 1, - .adda_1t_init = 0x01c00014, - .adda_1t_path_on = 0x01c00014, - .adda_2t_path_on_a = 0x01c00014, - .adda_2t_path_on_b = 0x01c00014, - .trxff_boundary = 0x3f7f, - .pbp_rx = PBP_PAGE_SIZE_256, - .pbp_tx = PBP_PAGE_SIZE_256, - .mactable = rtl8723b_mac_init_table, -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_fileops rtl8192cu_fops = { -- cgit v1.1 From 20e3b2e97eddad364e2d68dfecf47a17ae2f4d40 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:08 -0400 Subject: rtl8xxxu: move rtl8723a related code into rtl8xxxu_8723a.c This moves the rtl8723a code into it's own file. This is purely a code moving exercise, no code changes. This device specific file is a lot smaller since the gen1 chips (8723a, 8188c, 8188r, 8192c) share a lot more common code than the gen2 chips. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/Makefile | 3 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 17 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 399 +++++++++++++++++++++ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 388 +------------------- 4 files changed, 432 insertions(+), 375 deletions(-) create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index d27128c..7bdce80 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o -rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o +rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \ + rtl8xxxu_8723a.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 2807cb5..6d179d6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1350,6 +1350,7 @@ struct rtl8xxxu_fileops { extern int rtl8xxxu_debug; +extern struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[]; extern const u32 rtl8xxxu_iqk_phy_iq_bb_reg[]; u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr); u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr); @@ -1392,13 +1393,28 @@ int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv); void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv); +int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); +void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv); +void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv); +void rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, + int channel, bool ht40); +void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw); void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw); +void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv); +void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi); void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi); +void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect); void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect); +void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv); +void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv); +int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb, + struct ieee80211_rx_status *rx_status); int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb, struct ieee80211_rx_status *rx_status); int rtl8xxxu_gen2_channel_to_group(int channel); @@ -1406,4 +1422,5 @@ bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, int result[][8], int c1, int c2); extern struct rtl8xxxu_fileops rtl8192eu_fops; +extern struct rtl8xxxu_fileops rtl8723au_fops; extern struct rtl8xxxu_fileops rtl8723bu_fops; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c new file mode 100644 index 0000000..b464e22 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c @@ -0,0 +1,399 @@ +/* + * RTL8XXXU mac80211 USB driver - 8723a specific subdriver + * + * Copyright (c) 2014 - 2016 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +static struct rtl8xxxu_power_base rtl8723a_power_base = { + .reg_0e00 = 0x0a0c0c0c, + .reg_0e04 = 0x02040608, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x0a0c0d0e, + .reg_0e14 = 0x02040608, + .reg_0e18 = 0x0a0c0d0e, + .reg_0e1c = 0x02040608, + + .reg_0830 = 0x0a0c0c0c, + .reg_0834 = 0x02040608, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x0a0c0d0e, + .reg_0848 = 0x02040608, + .reg_084c = 0x0a0c0d0e, + .reg_0868 = 0x02040608, +}; + +static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00039c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001a3f1}, {0x0b, 0x00014787}, + {0x0c, 0x000896fe}, {0x0d, 0x0000e02c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00030355}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0000024f}, + {0x1f, 0x00000000}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x00057730}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f474}, + {0x15, 0x0004f477}, {0x15, 0x0008f455}, + {0x15, 0x000cf455}, {0x16, 0x00000339}, + {0x16, 0x00040339}, {0x16, 0x00080339}, + {0x16, 0x000c0366}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00000003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00000247}, {0x1f, 0x00000000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); + memcpy(priv->cck_tx_power_index_B, + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); + + memcpy(priv->ht20_tx_power_index_diff, + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); + memcpy(priv->ofdm_tx_power_index_diff, + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); + + memcpy(priv->ht40_max_power_offset, + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); + memcpy(priv->ht20_max_power_offset, + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); + + if (priv->efuse_wifi.efuse8723.version >= 0x01) { + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; + } + + priv->power_base = &rtl8723a_power_base; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", + efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.41s\n", + efuse->device_name); + return 0; +} + +static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + switch (priv->chip_cut) { + case 0: + fw_name = "rtlwifi/rtl8723aufw_A.bin"; + break; + case 1: + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723aufw_B.bin"; + else + fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin"; + + break; + default: + return -EINVAL; + } + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + +static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A); + + /* Reduce 80M spur */ + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + + return ret; +} + +static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* disable SW LPS 0x04[10]= 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(2); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* release WLON reset 0x04[16]= 1*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* disable HWPDN 0x04[15]= 0*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */ + /* + * Note: Vendor driver actually clears this bit, despite the + * documentation claims it's being set! + */ + val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); + val8 |= LEDCFG2_DPDT_SELECT; + val8 &= ~LEDCFG2_DPDT_SELECT; + rtl8xxxu_write8(priv, REG_LEDCFG2, val8); + +exit: + return ret; +} + +static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + /* + * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register + */ + rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); + + rtl8723a_disabled_to_emu(priv); + + ret = rtl8723a_emu_to_active(priv); + if (ret) + goto exit; + + /* + * 0x0004[19] = 1, reset 8051 + */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(3); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* For EFuse PG */ + val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); + val32 &= ~(BIT(28) | BIT(29) | BIT(30)); + val32 |= (0x06 << 28); + rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32); +exit: + return ret; +} + +struct rtl8xxxu_fileops rtl8723au_fops = { + .parse_efuse = rtl8723au_parse_efuse, + .load_firmware = rtl8723au_load_firmware, + .power_on = rtl8723au_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, + .init_phy_rf = rtl8723au_init_phy_rf, + .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen1_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc16, + .enable_rf = rtl8xxxu_gen1_enable_rf, + .disable_rf = rtl8xxxu_gen1_disable_rf, + .usb_quirks = rtl8xxxu_gen1_usb_quirks, + .set_tx_power = rtl8xxxu_gen1_set_tx_power, + .update_rate_mask = rtl8xxxu_update_rate_mask, + .report_connect = rtl8xxxu_gen1_report_connect, + .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, + .trxff_boundary = 0x27ff, + .pbp_rx = PBP_PAGE_SIZE_128, + .pbp_tx = PBP_PAGE_SIZE_128, + .mactable = rtl8xxxu_gen1_mac_init_table, +}; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 5542a41..6434558 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -128,7 +128,7 @@ static struct ieee80211_supported_band rtl8xxxu_supported_band = { .n_bitrates = ARRAY_SIZE(rtl8xxxu_rates), }; -static struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { +struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { {0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00}, {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, {0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00}, @@ -199,28 +199,6 @@ static struct rtl8xxxu_power_base rtl8192c_power_base = { }; #endif -static struct rtl8xxxu_power_base rtl8723a_power_base = { - .reg_0e00 = 0x0a0c0c0c, - .reg_0e04 = 0x02040608, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x0a0c0d0e, - .reg_0e14 = 0x02040608, - .reg_0e18 = 0x0a0c0d0e, - .reg_0e1c = 0x02040608, - - .reg_0830 = 0x0a0c0c0c, - .reg_0834 = 0x02040608, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x0a0c0d0e, - .reg_0848 = 0x02040608, - .reg_084c = 0x0a0c0d0e, - .reg_0868 = 0x02040608, -}; - static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { {0x800, 0x80040000}, {0x804, 0x00000003}, {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, @@ -684,81 +662,6 @@ static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { {0xffff, 0xffffffff} }; -static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00039c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001a3f1}, {0x0b, 0x00014787}, - {0x0c, 0x000896fe}, {0x0d, 0x0000e02c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00030355}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0000024f}, - {0x1f, 0x00000000}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x00057730}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f474}, - {0x15, 0x0004f477}, {0x15, 0x0008f455}, - {0x15, 0x000cf455}, {0x16, 0x00000339}, - {0x16, 0x00040339}, {0x16, 0x00080339}, - {0x16, 0x000c0366}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00000003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00000247}, {0x1f, 0x00000000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, @@ -1340,7 +1243,7 @@ error: return retval; } -static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) { u8 val8; u32 val32; @@ -1384,7 +1287,7 @@ static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); } -static void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv) { u8 sps0; u32 val32; @@ -1483,7 +1386,7 @@ int rtl8xxxu_gen2_channel_to_group(int channel) return group; } -static void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw) +void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw) { struct rtl8xxxu_priv *priv = hw->priv; u32 val32, rsr; @@ -1735,7 +1638,7 @@ void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw) } } -static void +void rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) { struct rtl8xxxu_power_base *power_base = priv->power_base; @@ -2110,57 +2013,6 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) return 0; } -static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, - efuse->cck_tx_power_index_A, - sizeof(efuse->cck_tx_power_index_A)); - memcpy(priv->cck_tx_power_index_B, - efuse->cck_tx_power_index_B, - sizeof(efuse->cck_tx_power_index_B)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->ht40_1s_tx_power_index_A, - sizeof(efuse->ht40_1s_tx_power_index_A)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->ht40_1s_tx_power_index_B, - sizeof(efuse->ht40_1s_tx_power_index_B)); - - memcpy(priv->ht20_tx_power_index_diff, - efuse->ht20_tx_power_index_diff, - sizeof(efuse->ht20_tx_power_index_diff)); - memcpy(priv->ofdm_tx_power_index_diff, - efuse->ofdm_tx_power_index_diff, - sizeof(efuse->ofdm_tx_power_index_diff)); - - memcpy(priv->ht40_max_power_offset, - efuse->ht40_max_power_offset, - sizeof(efuse->ht40_max_power_offset)); - memcpy(priv->ht20_max_power_offset, - efuse->ht20_max_power_offset, - sizeof(efuse->ht20_max_power_offset)); - - if (priv->efuse_wifi.efuse8723.version >= 0x01) { - priv->has_xtalk = 1; - priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; - } - - priv->power_base = &rtl8723a_power_base; - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", - efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.41s\n", - efuse->device_name); - return 0; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) @@ -2590,30 +2442,6 @@ exit: return ret; } -static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - switch (priv->chip_cut) { - case 0: - fw_name = "rtlwifi/rtl8723aufw_A.bin"; - break; - case 1: - if (priv->enable_bluetooth) - fw_name = "rtlwifi/rtl8723aufw_B.bin"; - else - fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin"; - - break; - default: - return -EINVAL; - } - - ret = rtl8xxxu_load_firmware(priv, fw_name); - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) @@ -2718,7 +2546,7 @@ int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, return 0; } -static void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv) { u8 val8, ldoa15, ldov12d, lpldo, ldohci12; u16 val16; @@ -2970,21 +2798,6 @@ int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, return 0; } -static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - int ret; - - ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A); - - /* Reduce 80M spur */ - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) { @@ -3032,7 +2845,7 @@ static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data) return ret; } -static int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) +int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) { int ret; int i; @@ -3888,7 +3701,7 @@ void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); } -static void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; int result[4][8]; /* last is final result */ @@ -4236,98 +4049,6 @@ void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); } -static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u32 val32; - int count, ret = 0; - - /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/ - val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); - val8 |= LDOA15_ENABLE; - rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); - - /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ - val8 = rtl8xxxu_read8(priv, 0x0067); - val8 &= ~BIT(4); - rtl8xxxu_write8(priv, 0x0067, val8); - - mdelay(1); - - /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_ANALOG_IPS; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - - /* disable SW LPS 0x04[10]= 0 */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(2); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* wait till 0x04[17] = 1 power ready*/ - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if (val32 & BIT(17)) - break; - - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* We should be able to optimize the following three entries into one */ - - /* release WLON reset 0x04[16]= 1*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(0); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* disable HWPDN 0x04[15]= 0*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~BIT(7); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* disable WL suspend*/ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); - val8 &= ~(BIT(3) | BIT(4)); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); - - /* set, then poll until 0 */ - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - val32 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); - - for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { - val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); - if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { - ret = 0; - break; - } - udelay(10); - } - - if (!count) { - ret = -EBUSY; - goto exit; - } - - /* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */ - /* - * Note: Vendor driver actually clears this bit, despite the - * documentation claims it's being set! - */ - val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); - val8 |= LEDCFG2_DPDT_SELECT; - val8 &= ~LEDCFG2_DPDT_SELECT; - rtl8xxxu_write8(priv, REG_LEDCFG2, val8); - -exit: - return ret; -} - static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) { u8 val8; @@ -4386,7 +4107,7 @@ int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) return retval; } -static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv) +void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv) { /* Fix USB interface interference issue */ rtl8xxxu_write8(priv, 0xfe40, 0xe0); @@ -4430,52 +4151,6 @@ void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); } -static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int ret; - - /* - * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register - */ - rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - - rtl8723a_disabled_to_emu(priv); - - ret = rtl8723a_emu_to_active(priv); - if (ret) - goto exit; - - /* - * 0x0004[19] = 1, reset 8051 - */ - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); - val8 |= BIT(3); - rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - * Set CR bit10 to enable 32k calibration. - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | - CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | - CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | - CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); - rtl8xxxu_write16(priv, REG_CR, val16); - - /* For EFuse PG */ - val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL); - val32 &= ~(BIT(28) | BIT(29) | BIT(30)); - val32 |= (0x06 << 28); - rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32); -exit: - return ret; -} - #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) @@ -5150,8 +4825,7 @@ static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw, rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); } -static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, int sgi) +void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi) { struct h2c_cmd h2c; @@ -5196,8 +4870,8 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); } -static void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, - u8 macid, bool connect) +void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) { struct h2c_cmd h2c; @@ -5867,9 +5541,8 @@ static void rtl8xxxu_rx_urb_work(struct work_struct *work) } } -static int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, - struct sk_buff *skb, - struct ieee80211_rx_status *rx_status) +int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) { struct rtl8xxxu_rxdesc16 *rx_desc = (struct rtl8xxxu_rxdesc16 *)skb->data; @@ -6819,39 +6492,6 @@ static void rtl8xxxu_disconnect(struct usb_interface *interface) ieee80211_free_hw(hw); } -static struct rtl8xxxu_fileops rtl8723au_fops = { - .parse_efuse = rtl8723au_parse_efuse, - .load_firmware = rtl8723au_load_firmware, - .power_on = rtl8723au_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_init_llt_table, - .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, - .init_phy_rf = rtl8723au_init_phy_rf, - .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen1_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc16, - .enable_rf = rtl8xxxu_gen1_enable_rf, - .disable_rf = rtl8xxxu_gen1_disable_rf, - .usb_quirks = rtl8xxxu_gen1_usb_quirks, - .set_tx_power = rtl8xxxu_gen1_set_tx_power, - .update_rate_mask = rtl8xxxu_update_rate_mask, - .report_connect = rtl8xxxu_gen1_report_connect, - .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), - .adda_1t_init = 0x0b1b25a0, - .adda_1t_path_on = 0x0bdb25a0, - .adda_2t_path_on_a = 0x04db25a4, - .adda_2t_path_on_b = 0x0b1b25a4, - .trxff_boundary = 0x27ff, - .pbp_rx = PBP_PAGE_SIZE_128, - .pbp_tx = PBP_PAGE_SIZE_128, - .mactable = rtl8xxxu_gen1_mac_init_table, -}; - #ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_fileops rtl8192cu_fops = { -- cgit v1.1 From 181725dd4f33df45b6efd5d74e55798343338875 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:09 -0400 Subject: rtl8xxxu: move rtl8188[cr] and rtl8192c related code into rtl8xxxu_8192c.c This moves the code for rtl8188c, rtl8188r, and rtl8192c into it's own file. This is purely a code moving exercise, there is no change to the code itself. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/Makefile | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 588 +++++++++++++++++++++ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 567 -------------------- 4 files changed, 590 insertions(+), 568 deletions(-) create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index 7bdce80..1cf951e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \ - rtl8xxxu_8723a.o + rtl8xxxu_8723a.o rtl8xxxu_8192c.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 6d179d6..d532933 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1421,6 +1421,7 @@ int rtl8xxxu_gen2_channel_to_group(int channel); bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv, int result[][8], int c1, int c2); +extern struct rtl8xxxu_fileops rtl8192cu_fops; extern struct rtl8xxxu_fileops rtl8192eu_fops; extern struct rtl8xxxu_fileops rtl8723au_fops; extern struct rtl8xxxu_fileops rtl8723bu_fops; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c new file mode 100644 index 0000000..242bf0e --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c @@ -0,0 +1,588 @@ +/* + * RTL8XXXU mac80211 USB driver - 8188c/8188r/8192c specific subdriver + * + * Copyright (c) 2014 - 2016 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This driver was written as a replacement for the vendor provided + * rtl8723au driver. As the Realtek 8xxx chips are very similar in + * their programming interface, I have started adding support for + * additional 8xxx chips like the 8192cu, 8188cus, etc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +#ifdef CONFIG_RTL8XXXU_UNTESTED +static struct rtl8xxxu_power_base rtl8192c_power_base = { + .reg_0e00 = 0x07090c0c, + .reg_0e04 = 0x01020405, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x0b0c0c0e, + .reg_0e14 = 0x01030506, + .reg_0e18 = 0x0b0c0d0e, + .reg_0e1c = 0x01030509, + + .reg_0830 = 0x07090c0c, + .reg_0834 = 0x01020405, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x0b0c0d0e, + .reg_0848 = 0x01030509, + .reg_084c = 0x0b0c0d0e, + .reg_0868 = 0x01030509, +}; + +static struct rtl8xxxu_power_base rtl8188r_power_base = { + .reg_0e00 = 0x06080808, + .reg_0e04 = 0x00040406, + .reg_0e08 = 0x00000000, + .reg_086c = 0x00000000, + + .reg_0e10 = 0x04060608, + .reg_0e14 = 0x00020204, + .reg_0e18 = 0x04060608, + .reg_0e1c = 0x00020204, + + .reg_0830 = 0x06080808, + .reg_0834 = 0x00040406, + .reg_0838 = 0x00000000, + .reg_086c_2 = 0x00000000, + + .reg_083c = 0x04060608, + .reg_0848 = 0x00020204, + .reg_084c = 0x04060608, + .reg_0868 = 0x00020204, +}; + +static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00010255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f424}, + {0x15, 0x0004f424}, {0x15, 0x0008f424}, + {0x15, 0x000cf424}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287af}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x00014297}, + {0x13, 0x00010295}, {0x13, 0x0000c298}, + {0x13, 0x0000819c}, {0x13, 0x000040a8}, + {0x13, 0x0000001c}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f424}, + {0x15, 0x0004f424}, {0x15, 0x0008f424}, + {0x15, 0x000cf424}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00010255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x00000000}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x00032000}, {0x12, 0x00071000}, + {0x12, 0x000b0000}, {0x12, 0x000fc000}, + {0x13, 0x000287b3}, {0x13, 0x000244b7}, + {0x13, 0x000204ab}, {0x13, 0x0001c49f}, + {0x13, 0x00018493}, {0x13, 0x0001429b}, + {0x13, 0x00010299}, {0x13, 0x0000c29c}, + {0x13, 0x000081a0}, {0x13, 0x000040ac}, + {0x13, 0x00000020}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f405}, + {0x15, 0x0004f405}, {0x15, 0x0008f405}, + {0x15, 0x000cf405}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { + {0x00, 0x00030159}, {0x01, 0x00031284}, + {0x02, 0x00098000}, {0x03, 0x00018c63}, + {0x04, 0x000210e7}, {0x09, 0x0002044f}, + {0x0a, 0x0001adb0}, {0x0b, 0x00054867}, + {0x0c, 0x0008992e}, {0x0d, 0x0000e529}, + {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, + {0x19, 0x00000000}, {0x1a, 0x00000255}, + {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, + {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, + {0x1f, 0x00080001}, {0x20, 0x0000b614}, + {0x21, 0x0006c000}, {0x22, 0x0000083c}, + {0x23, 0x00001558}, {0x24, 0x00000060}, + {0x25, 0x00000483}, {0x26, 0x0004f000}, + {0x27, 0x000ec7d9}, {0x28, 0x000977c0}, + {0x29, 0x00004783}, {0x2a, 0x00000001}, + {0x2b, 0x00021334}, {0x2a, 0x00000000}, + {0x2b, 0x00000054}, {0x2a, 0x00000001}, + {0x2b, 0x00000808}, {0x2b, 0x00053333}, + {0x2c, 0x0000000c}, {0x2a, 0x00000002}, + {0x2b, 0x00000808}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000003}, + {0x2b, 0x00000808}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000004}, + {0x2b, 0x00000808}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000005}, + {0x2b, 0x00000808}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000006}, + {0x2b, 0x00000709}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000007}, + {0x2b, 0x00000709}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000008}, + {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, + {0x2c, 0x0000000d}, {0x2a, 0x00000009}, + {0x2b, 0x0000060a}, {0x2b, 0x00053333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, + {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, + {0x2b, 0x0000060a}, {0x2b, 0x00063333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, + {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, + {0x2b, 0x0000060a}, {0x2b, 0x00073333}, + {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, + {0x2b, 0x0000050b}, {0x2b, 0x00066666}, + {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, + {0x10, 0x0004000f}, {0x11, 0x000e31fc}, + {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, + {0x10, 0x0002000f}, {0x11, 0x000203f9}, + {0x10, 0x0003000f}, {0x11, 0x000ff500}, + {0x10, 0x00000000}, {0x11, 0x00000000}, + {0x10, 0x0008000f}, {0x11, 0x0003f100}, + {0x10, 0x0009000f}, {0x11, 0x00023100}, + {0x12, 0x000d8000}, {0x12, 0x00090000}, + {0x12, 0x00051000}, {0x12, 0x00012000}, + {0x13, 0x00028fb4}, {0x13, 0x00024fa8}, + {0x13, 0x000207a4}, {0x13, 0x0001c3b0}, + {0x13, 0x000183a4}, {0x13, 0x00014398}, + {0x13, 0x000101a4}, {0x13, 0x0000c198}, + {0x13, 0x000080a4}, {0x13, 0x00004098}, + {0x13, 0x00000000}, {0x14, 0x0001944c}, + {0x14, 0x00059444}, {0x14, 0x0009944c}, + {0x14, 0x000d9444}, {0x15, 0x0000f405}, + {0x15, 0x0004f405}, {0x15, 0x0008f405}, + {0x15, 0x000cf405}, {0x16, 0x000e0330}, + {0x16, 0x000a0330}, {0x16, 0x00060330}, + {0x16, 0x00020330}, {0x00, 0x00010159}, + {0x18, 0x0000f401}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0x1f, 0x00080003}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0x1e, 0x00044457}, {0x1f, 0x00080000}, + {0x00, 0x00030159}, + {0xff, 0xffffffff} +}; + +static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + if (!priv->vendor_umc) + fw_name = "rtlwifi/rtl8192cufw_TMSC.bin"; + else if (priv->chip_cut || priv->rtl_chip == RTL8192C) + fw_name = "rtlwifi/rtl8192cufw_B.bin"; + else + fw_name = "rtlwifi/rtl8192cufw_A.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + +static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); + memcpy(priv->cck_tx_power_index_B, + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); + memcpy(priv->ht40_2s_tx_power_index_diff, + efuse->ht40_2s_tx_power_index_diff, + sizeof(efuse->ht40_2s_tx_power_index_diff)); + + memcpy(priv->ht20_tx_power_index_diff, + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); + memcpy(priv->ofdm_tx_power_index_diff, + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); + + memcpy(priv->ht40_max_power_offset, + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); + memcpy(priv->ht20_max_power_offset, + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", + efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.20s\n", + efuse->device_name); + + priv->power_base = &rtl8192c_power_base; + + if (efuse->rf_regulatory & 0x20) { + sprintf(priv->chip_name, "8188RU"); + priv->rtl_chip = RTL8188R; + priv->hi_pa = 1; + priv->no_pape = 1; + priv->power_base = &rtl8188r_power_base; + } + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8192cu_efuse)); + for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + return 0; +} + +static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + struct rtl8xxxu_rfregval *rftable; + int ret; + + if (priv->rtl_chip == RTL8188R) { + rftable = rtl8188ru_radioa_1t_highpa_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + } else if (priv->rf_paths == 1) { + rftable = rtl8192cu_radioa_1t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + } else { + rftable = rtl8192cu_radioa_2t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + if (ret) + goto exit; + rftable = rtl8192cu_radiob_2t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B); + } + +exit: + return ret; +} + +static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int i; + + for (i = 100; i; i--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + if (val8 & APS_FSMCO_PFM_ALDN) + break; + } + + if (!i) { + pr_info("%s: Poll failed\n", __func__); + return -ENODEV; + } + + /* + * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register + */ + rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); + rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b); + udelay(100); + + val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL); + if (!(val8 & LDOV12D_ENABLE)) { + pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8); + val8 |= LDOV12D_ENABLE; + rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8); + + udelay(100); + + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_MD2PP; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + } + + /* + * Auto enable WLAN + */ + val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); + val16 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); + + for (i = 1000; i; i--) { + val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); + if (!(val16 & APS_FSMCO_MAC_ENABLE)) + break; + } + if (!i) { + pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__); + return -EBUSY; + } + + /* + * Enable radio, GPIO, LED + */ + val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN | + APS_FSMCO_PFM_ALDN; + rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); + + /* + * Release RF digital isolation + */ + val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); + val16 &= ~SYS_ISO_DIOR; + rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); + + val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); + val8 &= ~APSD_CTRL_OFF; + rtl8xxxu_write8(priv, REG_APSD_CTRL, val8); + for (i = 200; i; i--) { + val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); + if (!(val8 & APSD_CTRL_OFF_STATUS)) + break; + } + + if (!i) { + pr_info("%s: APSD_CTRL poll failed\n", __func__); + return -EBUSY; + } + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE | + CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE; + rtl8xxxu_write16(priv, REG_CR, val16); + + rtl8xxxu_write8(priv, 0xfe10, 0x19); + + /* + * Workaround for 8188RU LNA power leakage problem. + */ + if (priv->rtl_chip == RTL8188R) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); + val32 &= ~BIT(1); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); + } + return 0; +} + +struct rtl8xxxu_fileops rtl8192cu_fops = { + .parse_efuse = rtl8192cu_parse_efuse, + .load_firmware = rtl8192cu_load_firmware, + .power_on = rtl8192cu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, + .init_phy_rf = rtl8192cu_init_phy_rf, + .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, + .config_channel = rtl8xxxu_gen1_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc16, + .enable_rf = rtl8xxxu_gen1_enable_rf, + .disable_rf = rtl8xxxu_gen1_disable_rf, + .usb_quirks = rtl8xxxu_gen1_usb_quirks, + .set_tx_power = rtl8xxxu_gen1_set_tx_power, + .update_rate_mask = rtl8xxxu_update_rate_mask, + .report_connect = rtl8xxxu_gen1_report_connect, + .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, + .trxff_boundary = 0x27ff, + .pbp_rx = PBP_PAGE_SIZE_128, + .pbp_tx = PBP_PAGE_SIZE_128, + .mactable = rtl8xxxu_gen1_mac_init_table, +}; +#endif diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 6434558..f035d15 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -153,52 +153,6 @@ struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = { {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff}, }; -#ifdef CONFIG_RTL8XXXU_UNTESTED -static struct rtl8xxxu_power_base rtl8188r_power_base = { - .reg_0e00 = 0x06080808, - .reg_0e04 = 0x00040406, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x04060608, - .reg_0e14 = 0x00020204, - .reg_0e18 = 0x04060608, - .reg_0e1c = 0x00020204, - - .reg_0830 = 0x06080808, - .reg_0834 = 0x00040406, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x04060608, - .reg_0848 = 0x00020204, - .reg_084c = 0x04060608, - .reg_0868 = 0x00020204, -}; - -static struct rtl8xxxu_power_base rtl8192c_power_base = { - .reg_0e00 = 0x07090c0c, - .reg_0e04 = 0x01020405, - .reg_0e08 = 0x00000000, - .reg_086c = 0x00000000, - - .reg_0e10 = 0x0b0c0c0e, - .reg_0e14 = 0x01030506, - .reg_0e18 = 0x0b0c0d0e, - .reg_0e1c = 0x01030509, - - .reg_0830 = 0x07090c0c, - .reg_0834 = 0x01020405, - .reg_0838 = 0x00000000, - .reg_086c_2 = 0x00000000, - - .reg_083c = 0x0b0c0d0e, - .reg_0848 = 0x01030509, - .reg_084c = 0x0b0c0d0e, - .reg_0868 = 0x01030509, -}; -#endif - static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { {0x800, 0x80040000}, {0x804, 0x00000003}, {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, @@ -662,257 +616,6 @@ static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { {0xffff, 0xffffffff} }; -#ifdef CONFIG_RTL8XXXU_UNTESTED -static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00010255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f424}, - {0x15, 0x0004f424}, {0x15, 0x0008f424}, - {0x15, 0x000cf424}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287af}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x00014297}, - {0x13, 0x00010295}, {0x13, 0x0000c298}, - {0x13, 0x0000819c}, {0x13, 0x000040a8}, - {0x13, 0x0000001c}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f424}, - {0x15, 0x0004f424}, {0x15, 0x0008f424}, - {0x15, 0x000cf424}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb1}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e52c}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00010255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x00000000}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000577c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x00032000}, {0x12, 0x00071000}, - {0x12, 0x000b0000}, {0x12, 0x000fc000}, - {0x13, 0x000287b3}, {0x13, 0x000244b7}, - {0x13, 0x000204ab}, {0x13, 0x0001c49f}, - {0x13, 0x00018493}, {0x13, 0x0001429b}, - {0x13, 0x00010299}, {0x13, 0x0000c29c}, - {0x13, 0x000081a0}, {0x13, 0x000040ac}, - {0x13, 0x00000020}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f405}, - {0x15, 0x0004f405}, {0x15, 0x0008f405}, - {0x15, 0x000cf405}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; - -static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { - {0x00, 0x00030159}, {0x01, 0x00031284}, - {0x02, 0x00098000}, {0x03, 0x00018c63}, - {0x04, 0x000210e7}, {0x09, 0x0002044f}, - {0x0a, 0x0001adb0}, {0x0b, 0x00054867}, - {0x0c, 0x0008992e}, {0x0d, 0x0000e529}, - {0x0e, 0x00039ce7}, {0x0f, 0x00000451}, - {0x19, 0x00000000}, {0x1a, 0x00000255}, - {0x1b, 0x00060a00}, {0x1c, 0x000fc378}, - {0x1d, 0x000a1250}, {0x1e, 0x0004445f}, - {0x1f, 0x00080001}, {0x20, 0x0000b614}, - {0x21, 0x0006c000}, {0x22, 0x0000083c}, - {0x23, 0x00001558}, {0x24, 0x00000060}, - {0x25, 0x00000483}, {0x26, 0x0004f000}, - {0x27, 0x000ec7d9}, {0x28, 0x000977c0}, - {0x29, 0x00004783}, {0x2a, 0x00000001}, - {0x2b, 0x00021334}, {0x2a, 0x00000000}, - {0x2b, 0x00000054}, {0x2a, 0x00000001}, - {0x2b, 0x00000808}, {0x2b, 0x00053333}, - {0x2c, 0x0000000c}, {0x2a, 0x00000002}, - {0x2b, 0x00000808}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000003}, - {0x2b, 0x00000808}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000004}, - {0x2b, 0x00000808}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000005}, - {0x2b, 0x00000808}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000006}, - {0x2b, 0x00000709}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000007}, - {0x2b, 0x00000709}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000008}, - {0x2b, 0x0000060a}, {0x2b, 0x0004b333}, - {0x2c, 0x0000000d}, {0x2a, 0x00000009}, - {0x2b, 0x0000060a}, {0x2b, 0x00053333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000a}, - {0x2b, 0x0000060a}, {0x2b, 0x0005b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000b}, - {0x2b, 0x0000060a}, {0x2b, 0x00063333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000c}, - {0x2b, 0x0000060a}, {0x2b, 0x0006b333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000d}, - {0x2b, 0x0000060a}, {0x2b, 0x00073333}, - {0x2c, 0x0000000d}, {0x2a, 0x0000000e}, - {0x2b, 0x0000050b}, {0x2b, 0x00066666}, - {0x2c, 0x0000001a}, {0x2a, 0x000e0000}, - {0x10, 0x0004000f}, {0x11, 0x000e31fc}, - {0x10, 0x0006000f}, {0x11, 0x000ff9f8}, - {0x10, 0x0002000f}, {0x11, 0x000203f9}, - {0x10, 0x0003000f}, {0x11, 0x000ff500}, - {0x10, 0x00000000}, {0x11, 0x00000000}, - {0x10, 0x0008000f}, {0x11, 0x0003f100}, - {0x10, 0x0009000f}, {0x11, 0x00023100}, - {0x12, 0x000d8000}, {0x12, 0x00090000}, - {0x12, 0x00051000}, {0x12, 0x00012000}, - {0x13, 0x00028fb4}, {0x13, 0x00024fa8}, - {0x13, 0x000207a4}, {0x13, 0x0001c3b0}, - {0x13, 0x000183a4}, {0x13, 0x00014398}, - {0x13, 0x000101a4}, {0x13, 0x0000c198}, - {0x13, 0x000080a4}, {0x13, 0x00004098}, - {0x13, 0x00000000}, {0x14, 0x0001944c}, - {0x14, 0x00059444}, {0x14, 0x0009944c}, - {0x14, 0x000d9444}, {0x15, 0x0000f405}, - {0x15, 0x0004f405}, {0x15, 0x0008f405}, - {0x15, 0x000cf405}, {0x16, 0x000e0330}, - {0x16, 0x000a0330}, {0x16, 0x00060330}, - {0x16, 0x00020330}, {0x00, 0x00010159}, - {0x18, 0x0000f401}, {0xfe, 0x00000000}, - {0xfe, 0x00000000}, {0x1f, 0x00080003}, - {0xfe, 0x00000000}, {0xfe, 0x00000000}, - {0x1e, 0x00044457}, {0x1f, 0x00080000}, - {0x00, 0x00030159}, - {0xff, 0xffffffff} -}; -#endif - static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = { { /* RF_A */ .hssiparm1 = REG_FPGA0_XA_HSSI_PARM1, @@ -2013,83 +1716,6 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) return 0; } -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) -{ - struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192; - int i; - - if (efuse->rtl_id != cpu_to_le16(0x8129)) - return -EINVAL; - - ether_addr_copy(priv->mac_addr, efuse->mac_addr); - - memcpy(priv->cck_tx_power_index_A, - efuse->cck_tx_power_index_A, - sizeof(efuse->cck_tx_power_index_A)); - memcpy(priv->cck_tx_power_index_B, - efuse->cck_tx_power_index_B, - sizeof(efuse->cck_tx_power_index_B)); - - memcpy(priv->ht40_1s_tx_power_index_A, - efuse->ht40_1s_tx_power_index_A, - sizeof(efuse->ht40_1s_tx_power_index_A)); - memcpy(priv->ht40_1s_tx_power_index_B, - efuse->ht40_1s_tx_power_index_B, - sizeof(efuse->ht40_1s_tx_power_index_B)); - memcpy(priv->ht40_2s_tx_power_index_diff, - efuse->ht40_2s_tx_power_index_diff, - sizeof(efuse->ht40_2s_tx_power_index_diff)); - - memcpy(priv->ht20_tx_power_index_diff, - efuse->ht20_tx_power_index_diff, - sizeof(efuse->ht20_tx_power_index_diff)); - memcpy(priv->ofdm_tx_power_index_diff, - efuse->ofdm_tx_power_index_diff, - sizeof(efuse->ofdm_tx_power_index_diff)); - - memcpy(priv->ht40_max_power_offset, - efuse->ht40_max_power_offset, - sizeof(efuse->ht40_max_power_offset)); - memcpy(priv->ht20_max_power_offset, - efuse->ht20_max_power_offset, - sizeof(efuse->ht20_max_power_offset)); - - dev_info(&priv->udev->dev, "Vendor: %.7s\n", - efuse->vendor_name); - dev_info(&priv->udev->dev, "Product: %.20s\n", - efuse->device_name); - - priv->power_base = &rtl8192c_power_base; - - if (efuse->rf_regulatory & 0x20) { - sprintf(priv->chip_name, "8188RU"); - priv->rtl_chip = RTL8188R; - priv->hi_pa = 1; - priv->no_pape = 1; - priv->power_base = &rtl8188r_power_base; - } - - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { - unsigned char *raw = priv->efuse_wifi.raw; - - dev_info(&priv->udev->dev, - "%s: dumping efuse (0x%02zx bytes):\n", - __func__, sizeof(struct rtl8192cu_efuse)); - for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) { - dev_info(&priv->udev->dev, "%02x: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - raw[i], raw[i + 1], raw[i + 2], - raw[i + 3], raw[i + 4], raw[i + 5], - raw[i + 6], raw[i + 7]); - } - } - return 0; -} - -#endif - static int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) { @@ -2442,27 +2068,6 @@ exit: return ret; } -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) -{ - char *fw_name; - int ret; - - if (!priv->vendor_umc) - fw_name = "rtlwifi/rtl8192cufw_TMSC.bin"; - else if (priv->chip_cut || priv->rtl_chip == RTL8192C) - fw_name = "rtlwifi/rtl8192cufw_B.bin"; - else - fw_name = "rtlwifi/rtl8192cufw_A.bin"; - - ret = rtl8xxxu_load_firmware(priv, fw_name); - - return ret; -} - -#endif - void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) { u16 val16; @@ -2798,32 +2403,6 @@ int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv, return 0; } -#ifdef CONFIG_RTL8XXXU_UNTESTED -static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv) -{ - struct rtl8xxxu_rfregval *rftable; - int ret; - - if (priv->rtl_chip == RTL8188R) { - rftable = rtl8188ru_radioa_1t_highpa_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - } else if (priv->rf_paths == 1) { - rftable = rtl8192cu_radioa_1t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - } else { - rftable = rtl8192cu_radioa_2t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); - if (ret) - goto exit; - rftable = rtl8192cu_radiob_2t_init_table; - ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B); - } - -exit: - return ret; -} -#endif - static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data) { int ret = -EBUSY; @@ -4151,115 +3730,6 @@ void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); } -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) -{ - u8 val8; - u16 val16; - u32 val32; - int i; - - for (i = 100; i; i--) { - val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO); - if (val8 & APS_FSMCO_PFM_ALDN) - break; - } - - if (!i) { - pr_info("%s: Poll failed\n", __func__); - return -ENODEV; - } - - /* - * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register - */ - rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b); - udelay(100); - - val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL); - if (!(val8 & LDOV12D_ENABLE)) { - pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8); - val8 |= LDOV12D_ENABLE; - rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8); - - udelay(100); - - val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); - val8 &= ~SYS_ISO_MD2PP; - rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); - } - - /* - * Auto enable WLAN - */ - val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); - val16 |= APS_FSMCO_MAC_ENABLE; - rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); - - for (i = 1000; i; i--) { - val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO); - if (!(val16 & APS_FSMCO_MAC_ENABLE)) - break; - } - if (!i) { - pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__); - return -EBUSY; - } - - /* - * Enable radio, GPIO, LED - */ - val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN | - APS_FSMCO_PFM_ALDN; - rtl8xxxu_write16(priv, REG_APS_FSMCO, val16); - - /* - * Release RF digital isolation - */ - val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL); - val16 &= ~SYS_ISO_DIOR; - rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16); - - val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); - val8 &= ~APSD_CTRL_OFF; - rtl8xxxu_write8(priv, REG_APSD_CTRL, val8); - for (i = 200; i; i--) { - val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL); - if (!(val8 & APSD_CTRL_OFF_STATUS)) - break; - } - - if (!i) { - pr_info("%s: APSD_CTRL poll failed\n", __func__); - return -EBUSY; - } - - /* - * Enable MAC DMA/WMAC/SCHEDULE/SEC block - */ - val16 = rtl8xxxu_read16(priv, REG_CR); - val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | - CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE | - CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE; - rtl8xxxu_write16(priv, REG_CR, val16); - - rtl8xxxu_write8(priv, 0xfe10, 0x19); - - /* - * Workaround for 8188RU LNA power leakage problem. - */ - if (priv->rtl_chip == RTL8188R) { - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM); - val32 &= ~BIT(1); - rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); - } - return 0; -} - -#endif - void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) { u8 val8; @@ -6492,43 +5962,6 @@ static void rtl8xxxu_disconnect(struct usb_interface *interface) ieee80211_free_hw(hw); } -#ifdef CONFIG_RTL8XXXU_UNTESTED - -static struct rtl8xxxu_fileops rtl8192cu_fops = { - .parse_efuse = rtl8192cu_parse_efuse, - .load_firmware = rtl8192cu_load_firmware, - .power_on = rtl8192cu_power_on, - .power_off = rtl8xxxu_power_off, - .reset_8051 = rtl8xxxu_reset_8051, - .llt_init = rtl8xxxu_init_llt_table, - .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, - .init_phy_rf = rtl8192cu_init_phy_rf, - .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, - .config_channel = rtl8xxxu_gen1_config_channel, - .parse_rx_desc = rtl8xxxu_parse_rxdesc16, - .enable_rf = rtl8xxxu_gen1_enable_rf, - .disable_rf = rtl8xxxu_gen1_disable_rf, - .usb_quirks = rtl8xxxu_gen1_usb_quirks, - .set_tx_power = rtl8xxxu_gen1_set_tx_power, - .update_rate_mask = rtl8xxxu_update_rate_mask, - .report_connect = rtl8xxxu_gen1_report_connect, - .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, - .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), - .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), - .adda_1t_init = 0x0b1b25a0, - .adda_1t_path_on = 0x0bdb25a0, - .adda_2t_path_on_a = 0x04db25a4, - .adda_2t_path_on_b = 0x0b1b25a4, - .trxff_boundary = 0x27ff, - .pbp_rx = PBP_PAGE_SIZE_128, - .pbp_tx = PBP_PAGE_SIZE_128, - .mactable = rtl8xxxu_gen1_mac_init_table, -}; - -#endif - static struct usb_device_id dev_table[] = { {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723au_fops}, -- cgit v1.1 From 97db5a87b0f0376f3814082d5a5b67e0b661a3df Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:10 -0400 Subject: rtl8xxxu: Rename rtl8723a_stop_tx_beacon() to rtl8xxxu_stop_tx_beacon() There is nothing 8723au specific about this function, so rename it to reflect this. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index f035d15..34f94bb 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -1029,8 +1029,7 @@ void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0); } - -static void rtl8723a_stop_tx_beacon(struct rtl8xxxu_priv *priv) +static void rtl8xxxu_stop_tx_beacon(struct rtl8xxxu_priv *priv) { u8 val8; @@ -4440,7 +4439,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); - rtl8723a_stop_tx_beacon(priv); + rtl8xxxu_stop_tx_beacon(priv); /* joinbss sequence */ rtl8xxxu_write16(priv, REG_BCN_PSR_RPT, @@ -5276,7 +5275,7 @@ static int rtl8xxxu_add_interface(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: - rtl8723a_stop_tx_beacon(priv); + rtl8xxxu_stop_tx_beacon(priv); val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE | -- cgit v1.1 From a46b099ca730e0069128b6a5491b171c92306c82 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:11 -0400 Subject: rtl8xxxu: rename rtl8723a_channel_group() to rtl8xxxu_gen1_channel_to_group() This function is generic for most (if not all) gen1 parts, so rename it to reflect this. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 34f94bb..9b12aed 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -1053,7 +1053,7 @@ static void rtl8xxxu_stop_tx_beacon(struct rtl8xxxu_priv *priv) * * Note: We index from 0 in the code */ -static int rtl8723a_channel_to_group(int channel) +static int rtl8xxxu_gen1_channel_to_group(int channel) { int group; @@ -1350,7 +1350,7 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) u8 val8; int group, i; - group = rtl8723a_channel_to_group(channel); + group = rtl8xxxu_gen1_channel_to_group(channel); cck[0] = priv->cck_tx_power_index_A[group] - 1; cck[1] = priv->cck_tx_power_index_B[group] - 1; -- cgit v1.1 From 993dd9b425f548105679b8de310869fef2475c65 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:12 -0400 Subject: rtl8xxxu: Rename rtl8723a_disabled_to_emu() to rtl8xxxu_disabled_to_emu() This function is generic to most of the chips, so change the name to reflect this. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index d532933..f773c0e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1392,7 +1392,7 @@ void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv); -void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv); +void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv); int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c index b464e22..7c347ba 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c @@ -331,7 +331,7 @@ static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) */ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - rtl8723a_disabled_to_emu(priv); + rtl8xxxu_disabled_to_emu(priv); ret = rtl8723a_emu_to_active(priv); if (ret) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index 7d06dca..a711cb8 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1406,7 +1406,7 @@ static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) u32 val32; int ret; - rtl8723a_disabled_to_emu(priv); + rtl8xxxu_disabled_to_emu(priv); ret = rtl8723b_emu_to_active(priv); if (ret) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 9b12aed..d71a0c6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3607,7 +3607,7 @@ exit: return ret; } -void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) +void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv) { u8 val8; -- cgit v1.1 From 9c0343d4f48bc7734e7945b8c50c2f95d9c38244 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:13 -0400 Subject: rtl8xxxu: Split rtl8723a_h2c_cmd() into a gen1 and a gen2 version The H2C API is completely different between gen1 and gen2 parts, so there is little point trying to treat this as a generic function. All calls to *_h2c_cmd() will always come from a gen1 or a gen2 specific function. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 3 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 12 +-- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 86 ++++++++++++++++------ 3 files changed, 72 insertions(+), 29 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index f773c0e..17f62ba 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1390,7 +1390,8 @@ void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv); int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); -int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); +int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, + struct h2c_cmd *h2c, int len); int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv); void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv); int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index a711cb8..9d4bcd9 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -322,7 +322,7 @@ static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; h2c.bt_mp_oper.data = data; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); reqnum++; memset(&h2c, 0, sizeof(struct h2c_cmd)); @@ -330,7 +330,7 @@ static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; h2c.bt_mp_oper.addr = reg; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); } static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) @@ -1529,7 +1529,7 @@ static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; h2c.bt_grant.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); /* * WLAN action by PTA @@ -1574,7 +1574,7 @@ static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; h2c.ant_sel_rsv.ant_inverse = 1; h2c.ant_sel_rsv.int_switch_type = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); /* * 0x280, 0x00, 0x200, 0x80 - not clear @@ -1596,12 +1596,12 @@ static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.bt_info.cmd = H2C_8723B_BT_INFO; h2c.bt_info.data = BIT(0); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; h2c.ignore_wlan.data = 0; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); } static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index d71a0c6..7aecbe7 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -887,7 +887,8 @@ int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, return retval; } -int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) +int +rtl8xxxu_gen1_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) { struct device *dev = &priv->udev->dev; int mbox_nr, retry, retval = 0; @@ -898,8 +899,7 @@ int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) mbox_nr = priv->next_mbox; mbox_reg = REG_HMBOX_0 + (mbox_nr * 4); - mbox_ext_reg = priv->fops->mbox_ext_reg + - (mbox_nr * priv->fops->mbox_ext_width); + mbox_ext_reg = REG_HMBOX_EXT_0 + (mbox_nr * 2); /* * MBOX ready? @@ -921,19 +921,61 @@ int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) * Need to swap as it's being swapped again by rtl8xxxu_write16/32() */ if (len > sizeof(u32)) { - if (priv->fops->mbox_ext_width == 4) { - rtl8xxxu_write32(priv, mbox_ext_reg, - le32_to_cpu(h2c->raw_wide.ext)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C_EXT %08x\n", - le32_to_cpu(h2c->raw_wide.ext)); - } else { - rtl8xxxu_write16(priv, mbox_ext_reg, - le16_to_cpu(h2c->raw.ext)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C_EXT %04x\n", - le16_to_cpu(h2c->raw.ext)); - } + rtl8xxxu_write16(priv, mbox_ext_reg, le16_to_cpu(h2c->raw.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %04x\n", + le16_to_cpu(h2c->raw.ext)); + } + rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data)); + + priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX; + +error: + mutex_unlock(&priv->h2c_mutex); + return retval; +} + +int +rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len) +{ + struct device *dev = &priv->udev->dev; + int mbox_nr, retry, retval = 0; + int mbox_reg, mbox_ext_reg; + u8 val8; + + mutex_lock(&priv->h2c_mutex); + + mbox_nr = priv->next_mbox; + mbox_reg = REG_HMBOX_0 + (mbox_nr * 4); + mbox_ext_reg = REG_HMBOX_EXT0_8723B + (mbox_nr * 4); + + /* + * MBOX ready? + */ + retry = 100; + do { + val8 = rtl8xxxu_read8(priv, REG_HMTFR); + if (!(val8 & BIT(mbox_nr))) + break; + } while (retry--); + + if (!retry) { + dev_info(dev, "%s: Mailbox busy\n", __func__); + retval = -EBUSY; + goto error; + } + + /* + * Need to swap as it's being swapped again by rtl8xxxu_write16/32() + */ + if (len > sizeof(u32)) { + rtl8xxxu_write32(priv, mbox_ext_reg, + le32_to_cpu(h2c->raw_wide.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %08x\n", + le32_to_cpu(h2c->raw_wide.ext)); } rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data)); if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) @@ -3276,7 +3318,7 @@ void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; h2c.bt_wlan_calibration.data = start; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); } void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) @@ -3792,7 +3834,7 @@ static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, h2c.b_type_dma.data3 = arg3; h2c.b_type_dma.data4 = arg4; h2c.b_type_dma.data5 = arg5; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); } #endif @@ -4310,7 +4352,7 @@ void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi) dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", __func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask)); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); + rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); } void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, @@ -4336,7 +4378,7 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", __func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg)); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); } void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, @@ -4353,7 +4395,7 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, else h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); + rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); } void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, @@ -4369,7 +4411,7 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, else h2c.media_status_rpt.parm &= ~BIT(0); - rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); } static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg) -- cgit v1.1 From 27c7e89ea77bf550935acab13b2419e0ace83af2 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:14 -0400 Subject: rtl8xxxu: rtl8xxxu_prepare_calibrate() is never used on gen1 Rename it to rtl8xxxu_gen2_prepare_calibrate() and remove the calls to it from rtl8xxxu_gen1_phy_iq_calibrate() Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 4 ++-- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 +-------- 3 files changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 17f62ba..1edb3ad 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1388,7 +1388,7 @@ void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv); void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv); void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv); int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page); -void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); +void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index 9d4bcd9..3472f6c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1108,7 +1108,7 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) s32 reg_tmp = 0; bool simu; - rtl8xxxu_prepare_calibrate(priv, 1); + rtl8xxxu_gen2_prepare_calibrate(priv, 1); memset(result, 0, sizeof(result)); candidate = -1; @@ -1217,7 +1217,7 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) if (priv->rf_paths > 1) dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); - rtl8xxxu_prepare_calibrate(priv, 0); + rtl8xxxu_gen2_prepare_calibrate(priv, 0); } static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 7aecbe7..9f6dbb4 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3307,13 +3307,10 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, } } -void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) +void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) { struct h2c_cmd h2c; - if (priv->fops->mbox_ext_width < 4) - return; - memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; h2c.bt_wlan_calibration.data = start; @@ -3332,8 +3329,6 @@ void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) s32 reg_tmp = 0; bool simu; - rtl8xxxu_prepare_calibrate(priv, 1); - memset(result, 0, sizeof(result)); candidate = -1; @@ -3421,8 +3416,6 @@ void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, priv->bb_recovery_backup, RTL8XXXU_BB_REGS); - - rtl8xxxu_prepare_calibrate(priv, 0); } static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) -- cgit v1.1 From e1ca790c8a32c0c77b9d89089ac7e73b72c2adfc Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 28 Apr 2016 15:19:15 -0400 Subject: rtl8xxxu: Remove the now obsolete mbox_ext_reg info from rtl8xxxu_fileops With two different h2c_cmd() functions, mbox_ext_reg and mbox_ext_width are no longer needed. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 -- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 2 -- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 2 -- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 2 -- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 2 -- 5 files changed, 10 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 1edb3ad..870c9cd 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1329,8 +1329,6 @@ struct rtl8xxxu_fileops { void (*report_connect) (struct rtl8xxxu_priv *priv, u8 macid, bool connect); int writeN_block_size; - u16 mbox_ext_reg; - char mbox_ext_width; char tx_desc_size; char rx_desc_size; char has_s0s1; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c index 242bf0e..2c86b55 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c @@ -572,8 +572,6 @@ struct rtl8xxxu_fileops rtl8192cu_fops = { .update_rate_mask = rtl8xxxu_update_rate_mask, .report_connect = rtl8xxxu_gen1_report_connect, .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), .adda_1t_init = 0x0b1b25a0, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index 98f4ba3..fe19ace 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1509,8 +1509,6 @@ struct rtl8xxxu_fileops rtl8192eu_fops = { .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, .writeN_block_size = 128, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), .has_s0s1 = 0, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c index 7c347ba..a8e172c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c @@ -384,8 +384,6 @@ struct rtl8xxxu_fileops rtl8723au_fops = { .update_rate_mask = rtl8xxxu_update_rate_mask, .report_connect = rtl8xxxu_gen1_report_connect, .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT_0, - .mbox_ext_width = 2, .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), .adda_1t_init = 0x0b1b25a0, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index 3472f6c..4186e7c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1668,8 +1668,6 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, .writeN_block_size = 1024, - .mbox_ext_reg = REG_HMBOX_EXT0_8723B, - .mbox_ext_width = 4, .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), .has_s0s1 = 1, -- cgit v1.1 From 94ee3f19b15e6193cddab8f7a82af0023efff101 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 21 Apr 2016 16:17:49 +0300 Subject: ath10k: remove VHT capabilities from 2.4GHz According to the spec, VHT doesn't exist in 2.4GHz. There are vendor extensions to allow a subset of VHT to work (notably 256-QAM), but since mac80211 doesn't support those advertising VHT capability on 2.4GHz leads to the behaviour of reporting VHT capabilities but not being able to use any of them due to mac80211's code requiring 80 MHz support. Remove the VHT capabilities from 2.4GHz for now. If mac80211 gets extended to use the (likely Broadcom) vendor IEs for it and handles the lack of 80 MHz support, it can be added back. Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index de31eb6..465dcee 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4278,9 +4278,6 @@ static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar) if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { band = &ar->mac.sbands[NL80211_BAND_2GHZ]; band->ht_cap = ht_cap; - - /* Enable the VHT support at 2.4 GHz */ - band->vht_cap = vht_cap; } if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { band = &ar->mac.sbands[NL80211_BAND_5GHZ]; -- cgit v1.1 From de46d165658fbfcec8d083513fb96dec6d28d454 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 26 Apr 2016 20:54:36 +0530 Subject: ath10k: move spectral related structures under ath10k debugfs Spectral related structures are accessed / modified only if ath10k debugfs is enabled, so it makes more sense to move them under ATH10K_DEBUGFS Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 1379054..ff8d2f9 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -883,8 +883,6 @@ struct ath10k { #ifdef CONFIG_ATH10K_DEBUGFS struct ath10k_debug debug; -#endif - struct { /* relay(fs) channel for spectral scan */ struct rchan *rfs_chan_spec_scan; @@ -893,6 +891,7 @@ struct ath10k { enum ath10k_spectral_mode mode; struct ath10k_spec_scan config; } spectral; +#endif struct { /* protected by conf_mutex */ -- cgit v1.1 From 4ad24a9d83bd4bf0a85e95bf144e18d3fda4fbf1 Mon Sep 17 00:00:00 2001 From: Anilkumar Kolli Date: Tue, 26 Apr 2016 21:35:48 +0530 Subject: ath10k: fix kernel panic, move arvifs list head init before htt init It is observed that while loading and unloading ath10k modules in an infinite loop, before ath10k_core_start() completion HTT rx frames are received, while processing these frames, dereferencing the arvifs list code is getting hit before initilizing the arvifs list, causing a kernel panic. This patch initilizes the arvifs list before initilizing htt. Fixes the below issue: [] (ath10k_htt_rx_pktlog_completion_handler+0x278/0xd08 [ath10k_core]) [] (ath10k_htt_rx_pktlog_completion_handler [ath10k_core]) [] (ath10k_htt_txrx_compl_task+0x5f4/0xeb0 [ath10k_core]) [] (ath10k_htt_txrx_compl_task [ath10k_core]) [] (tasklet_action+0x8c/0xec) [] (tasklet_action) [] (__do_softirq+0xf8/0x228) [] (__do_softirq) [] (run_ksoftirqd+0x30/0x90) Code: e5954ad8 e2899008 e1540009 0a00000d (e5943008) ---[ end trace 71de5c2e011dbf56 ]--- Kernel panic - not syncing: Fatal exception in interrupt Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Cc: Signed-off-by: Anilkumar Kolli Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index e94cb87..58a220c 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1758,6 +1758,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, goto err_hif_stop; } + ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1; + + INIT_LIST_HEAD(&ar->arvifs); + /* we don't care about HTT in UTF mode */ if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { status = ath10k_htt_setup(&ar->htt); @@ -1771,10 +1775,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, if (status) goto err_hif_stop; - ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1; - - INIT_LIST_HEAD(&ar->arvifs); - return 0; err_hif_stop: -- cgit v1.1 From dd2c5fcb9f515964a6eed528a621f2b93e4a14ce Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Apr 2016 16:23:19 +0530 Subject: ath10k: add pdev bss channel info wmi definitions Add WMI definitions for pdev bss channel information request and event. Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/wmi.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index fe36b2c..084b113 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1444,6 +1444,7 @@ enum wmi_10_2_cmd_id { WMI_10_2_MU_CAL_START_CMDID, WMI_10_2_SET_LTEU_CONFIG_CMDID, WMI_10_2_SET_CCA_PARAMS, + WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, }; @@ -1487,6 +1488,8 @@ enum wmi_10_2_event_id { WMI_10_2_WDS_PEER_EVENTID, WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, WMI_10_2_PDEV_TEMPERATURE_EVENTID, + WMI_10_2_MU_REPORT_EVENTID, + WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, }; @@ -2451,6 +2454,7 @@ enum wmi_10_2_feature_mask { WMI_10_2_RX_BATCH_MODE = BIT(0), WMI_10_2_ATF_CONFIG = BIT(1), WMI_10_2_COEX_GPIO = BIT(3), + WMI_10_2_BSS_CHAN_INFO = BIT(6), WMI_10_2_PEER_STATS = BIT(7), }; -- cgit v1.1 From 8a0b459e36cf33dd96893de02a2d2b4990cbb143 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Apr 2016 16:23:20 +0530 Subject: ath10k: implement wmi_pdev_bss_chan_info_request Add WMI ops to send pdev_bss_chan_info_request command to target. This command will be used to retrieve updated cycle counters and noise floor value of current operating channel (bss channel). Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 25 ++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi.h | 10 ++++++++++ 3 files changed, 55 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 7fb00dc..64ebd30 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -191,6 +191,9 @@ struct wmi_ops { u32 fw_feature_bitmap); int (*get_vdev_subtype)(struct ath10k *ar, enum wmi_vdev_subtype subtype); + struct sk_buff *(*gen_pdev_bss_chan_info_req) + (struct ath10k *ar, + enum wmi_bss_survey_req_type type); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -1361,4 +1364,22 @@ ath10k_wmi_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype) return ar->wmi.ops->get_vdev_subtype(ar, subtype); } +static inline int +ath10k_wmi_pdev_bss_chan_info_request(struct ath10k *ar, + enum wmi_bss_survey_req_type type) +{ + struct ath10k_wmi *wmi = &ar->wmi; + struct sk_buff *skb; + + if (!wmi->ops->gen_pdev_bss_chan_info_req) + return -EOPNOTSUPP; + + skb = wmi->ops->gen_pdev_bss_chan_info_req(ar, type); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + wmi->cmd->pdev_bss_chan_info_request_cmdid); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 39a54a5..5471f24 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -521,7 +521,8 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = { .vdev_filter_neighbor_rx_packets_cmdid = WMI_CMD_UNSUPPORTED, .mu_cal_start_cmdid = WMI_CMD_UNSUPPORTED, .set_cca_params_cmdid = WMI_CMD_UNSUPPORTED, - .pdev_bss_chan_info_request_cmdid = WMI_CMD_UNSUPPORTED, + .pdev_bss_chan_info_request_cmdid = + WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, }; /* 10.4 WMI cmd track */ @@ -6637,6 +6638,26 @@ ath10k_wmi_10_2_op_gen_pdev_get_temperature(struct ath10k *ar) return skb; } +static struct sk_buff * +ath10k_wmi_10_2_op_gen_pdev_bss_chan_info(struct ath10k *ar, + enum wmi_bss_survey_req_type type) +{ + struct wmi_pdev_chan_info_req_cmd *cmd; + struct sk_buff *skb; + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_pdev_chan_info_req_cmd *)skb->data; + cmd->type = __cpu_to_le32(type); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi pdev bss info request type %d\n", type); + + return skb; +} + /* This function assumes the beacon is already DMA mapped */ static struct sk_buff * ath10k_wmi_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id, const void *bcn, @@ -7736,6 +7757,7 @@ static const struct wmi_ops wmi_10_2_4_ops = { .gen_init = ath10k_wmi_10_2_op_gen_init, .gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc, .gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature, + .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, /* shared with 10.1 */ .map_svc = wmi_10x_svc_map, @@ -7862,6 +7884,7 @@ static const struct wmi_ops wmi_10_4_ops = { .gen_request_stats = ath10k_wmi_op_gen_request_stats, .gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature, .get_vdev_subtype = ath10k_wmi_10_4_op_get_vdev_subtype, + .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, }; int ath10k_wmi_attach(struct ath10k *ar) diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 084b113..30c6a83 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6488,6 +6488,16 @@ enum wmi_host_platform_type { WMI_HOST_PLATFORM_LOW_PERF, }; +enum wmi_bss_survey_req_type { + WMI_BSS_SURVEY_REQ_TYPE_READ = 1, + WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, +}; + +struct wmi_pdev_chan_info_req_cmd { + __le32 type; + __le32 reserved; +} __packed; + struct ath10k; struct ath10k_vif; struct ath10k_fw_stats_pdev; -- cgit v1.1 From 89d2d183bb0139ee3944c94001821d30be644130 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Apr 2016 16:23:21 +0530 Subject: ath10k: handle pdev_chan_info wmi event Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 11 +++++++++++ 2 files changed, 43 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 5471f24..af97759 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4794,6 +4794,32 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb) return 0; } +static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar, + struct sk_buff *skb) +{ + struct wmi_pdev_bss_chan_info_event *ev; + u64 busy, total, tx, rx, rx_bss; + u32 freq, noise_floor; + + ev = (struct wmi_pdev_bss_chan_info_event *)skb->data; + if (WARN_ON(skb->len < sizeof(*ev))) + return -EPROTO; + + freq = __le32_to_cpu(ev->freq); + noise_floor = __le32_to_cpu(ev->noise_floor); + busy = __le64_to_cpu(ev->cycle_busy); + total = __le64_to_cpu(ev->cycle_total); + tx = __le64_to_cpu(ev->cycle_tx); + rx = __le64_to_cpu(ev->cycle_rx); + rx_bss = __le64_to_cpu(ev->cycle_rx_bss); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi event pdev bss chan info:\n freq: %d noise: %d cycle: busy %llu total %llu tx %llu rx %llu rx_bss %llu\n", + freq, noise_floor, busy, total, tx, rx, rx_bss); + + return 0; +} + static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; @@ -5137,6 +5163,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_2_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; case WMI_10_2_RTT_KEEPALIVE_EVENTID: case WMI_10_2_GPIO_INPUT_EVENTID: case WMI_10_2_PEER_RATECODE_LIST_EVENTID: @@ -5223,6 +5252,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; default: ath10k_warn(ar, "Unknown eventid: %d\n", id); break; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 30c6a83..9fdf47e 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6285,6 +6285,17 @@ struct wmi_pdev_temperature_event { __le32 temperature; } __packed; +struct wmi_pdev_bss_chan_info_event { + __le32 freq; + __le32 noise_floor; + __le64 cycle_busy; + __le64 cycle_total; + __le64 cycle_tx; + __le64 cycle_rx; + __le64 cycle_rx_bss; + __le32 reserved; +} __packed; + /* WOW structures */ enum wmi_wow_wakeup_event { WOW_BMISS_EVENT = 0, -- cgit v1.1 From fa7937e3d5c293a3b1aceafbaa60ed0a60f4b319 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Apr 2016 16:23:22 +0530 Subject: ath10k: update bss channel survey information During hw scan, firmware sends two channel information events (pre- complete, complete) to host for each channel change. The snap shot of cycle counters (rx_clear and total) between these two events are given for survey dump. In order to get latest survey statistics of all channels, a scan request has to be issued. In general, an AP DUT is brought up, it won't leave BSS channel except few cases like overlapping bss or radar detection. So survey statistics of bss channel is always referring to older data that are collected before starting AP (either ACS/OBSS scan). To collect latest survey information from target, firmware provides WMI interface to read cycle counters from hardware. For each survey dump request, BSS channel cycle counters are read and cleared in hardware. This makes sure that behavior is in align with ath9k survey report. So survey dump always gives snap shot of cycle counters b/w two survey requests. Signed-off-by: Yanbo Li Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 5 +++++ drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/mac.c | 35 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 29 ++++++++++++++++++++++++++++ 4 files changed, 70 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 58a220c..57d7aad 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1392,6 +1392,7 @@ static void ath10k_core_restart(struct work_struct *work) complete_all(&ar->install_key_done); complete_all(&ar->vdev_setup_done); complete_all(&ar->thermal.wmi_sync); + complete_all(&ar->bss_survey_done); wake_up(&ar->htt.empty_tx_wq); wake_up(&ar->wmi.tx_credits_wq); wake_up(&ar->peer_mapping_wq); @@ -1724,6 +1725,9 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, if (ath10k_peer_stats_enabled(ar)) val = WMI_10_4_PEER_STATS; + if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) + val |= WMI_10_4_BSS_CHANNEL_INFO_64; + status = ath10k_mac_ext_resource_config(ar, val); if (status) { ath10k_err(ar, @@ -2085,6 +2089,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, init_completion(&ar->install_key_done); init_completion(&ar->vdev_setup_done); init_completion(&ar->thermal.wmi_sync); + init_completion(&ar->bss_survey_done); INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index ff8d2f9..1852e0e 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -876,6 +876,7 @@ struct ath10k { * avoid reporting garbage data. */ bool ch_info_can_report_survey; + struct completion bss_survey_done; struct dfs_pattern_detector *dfs_detector; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 465dcee..6dd1d26 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6404,6 +6404,39 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw, mutex_unlock(&ar->conf_mutex); } +static void +ath10k_mac_update_bss_chan_survey(struct ath10k *ar, + struct ieee80211_channel *channel) +{ + int ret; + enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR; + + lockdep_assert_held(&ar->conf_mutex); + + if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map) || + (ar->rx_channel != channel)) + return; + + if (ar->scan.state != ATH10K_SCAN_IDLE) { + ath10k_dbg(ar, ATH10K_DBG_MAC, "ignoring bss chan info request while scanning..\n"); + return; + } + + reinit_completion(&ar->bss_survey_done); + + ret = ath10k_wmi_pdev_bss_chan_info_request(ar, type); + if (ret) { + ath10k_warn(ar, "failed to send pdev bss chan info request\n"); + return; + } + + ret = wait_for_completion_timeout(&ar->bss_survey_done, 3 * HZ); + if (!ret) { + ath10k_warn(ar, "bss channel survey timed out\n"); + return; + } +} + static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) { @@ -6428,6 +6461,8 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, goto exit; } + ath10k_mac_update_bss_chan_survey(ar, survey->channel); + spin_lock_bh(&ar->data_lock); memcpy(survey, ar_survey, sizeof(*survey)); spin_unlock_bh(&ar->data_lock); diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index af97759..f71c1fb 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4798,8 +4798,11 @@ static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar, struct sk_buff *skb) { struct wmi_pdev_bss_chan_info_event *ev; + struct survey_info *survey; u64 busy, total, tx, rx, rx_bss; u32 freq, noise_floor; + u32 cc_freq_hz = ar->hw_params.channel_counters_freq_hz; + int idx; ev = (struct wmi_pdev_bss_chan_info_event *)skb->data; if (WARN_ON(skb->len < sizeof(*ev))) @@ -4817,6 +4820,29 @@ static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar, "wmi event pdev bss chan info:\n freq: %d noise: %d cycle: busy %llu total %llu tx %llu rx %llu rx_bss %llu\n", freq, noise_floor, busy, total, tx, rx, rx_bss); + spin_lock_bh(&ar->data_lock); + idx = freq_to_idx(ar, freq); + if (idx >= ARRAY_SIZE(ar->survey)) { + ath10k_warn(ar, "bss chan info: invalid frequency %d (idx %d out of bounds)\n", + freq, idx); + goto exit; + } + + survey = &ar->survey[idx]; + + survey->noise = noise_floor; + survey->time = div_u64(total, cc_freq_hz); + survey->time_busy = div_u64(busy, cc_freq_hz); + survey->time_rx = div_u64(rx_bss, cc_freq_hz); + survey->time_tx = div_u64(tx, cc_freq_hz); + survey->filled |= (SURVEY_INFO_NOISE_DBM | + SURVEY_INFO_TIME | + SURVEY_INFO_TIME_BUSY | + SURVEY_INFO_TIME_RX | + SURVEY_INFO_TIME_TX); +exit: + spin_unlock_bh(&ar->data_lock); + complete(&ar->bss_survey_done); return 0; } @@ -5640,6 +5666,9 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar) if (ath10k_peer_stats_enabled(ar)) features |= WMI_10_2_PEER_STATS; + if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) + features |= WMI_10_2_BSS_CHAN_INFO; + cmd->resource_config.feature_mask = __cpu_to_le32(features); memcpy(&cmd->resource_config.common, &config, sizeof(config)); -- cgit v1.1 From 9a5f91a1d63f3e1fbd2148ffdce5b9ba98cbd88c Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Apr 2016 16:26:26 +0530 Subject: ath10k: release pre_cal_file while unloading driver Failing to release pre_cal_file caldata on deinit causes memory leak. Fixes: b131129d9657 ("ath10k: fix calibration init sequence of qca99x0") Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 57d7aad..ee249e0 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -686,6 +686,9 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar) if (!IS_ERR(ar->cal_file)) release_firmware(ar->cal_file); + if (!IS_ERR(ar->pre_cal_file)) + release_firmware(ar->pre_cal_file); + ath10k_swap_code_seg_release(ar); ar->normal_mode_fw.fw_file.otp_data = NULL; @@ -696,6 +699,7 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar) ar->normal_mode_fw.fw_file.firmware_len = 0; ar->cal_file = NULL; + ar->pre_cal_file = NULL; } static int ath10k_fetch_cal_file(struct ath10k *ar) -- cgit v1.1 From 8569f5915456f462c8a88b751fa6c14596bfa3fe Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 28 Apr 2016 16:45:04 +0200 Subject: ath9k: reuse ar9003_hw_tx_power_regwrite for tx99 setup The same functionality as ar9003_hw_tx_power_regwrite is hardcoded in ar9003_hw_tx99_set_txpower. Just reuse the existing ar9003_hw_tx_power_regwrite for TX99 setup too. Signed-off-by: Helmut Schaa Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 1 + drivers/net/wireless/ath/ath9k/ar9003_phy.c | 60 ++------------------------ 3 files changed, 5 insertions(+), 58 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index f680982..dec1a31 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4402,7 +4402,7 @@ static void ar9003_hw_selfgen_tpc_txpower(struct ath_hw *ah, } /* Set tx power registers to array of values passed in */ -static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) +int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) { #define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) /* make sure forced gain is not set */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 694ca2e..107bcfb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -355,5 +355,6 @@ unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah, struct ath9k_channel *chan); void ar9003_hw_internal_regulator_apply(struct ath_hw *ah); +int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray); #endif diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index be14a8e..2f15cbc 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -17,6 +17,7 @@ #include #include "hw.h" #include "ar9003_phy.h" +#include "ar9003_eeprom.h" #define AR9300_OFDM_RATES 8 #define AR9300_HT_SS_RATES 8 @@ -1840,7 +1841,7 @@ static void ar9003_hw_tx99_stop(struct ath_hw *ah) static void ar9003_hw_tx99_set_txpower(struct ath_hw *ah, u8 txpower) { - static s16 p_pwr_array[ar9300RateSize] = { 0 }; + static u8 p_pwr_array[ar9300RateSize] = { 0 }; unsigned int i; if (txpower <= MAX_RATE_POWER) { @@ -1851,62 +1852,7 @@ static void ar9003_hw_tx99_set_txpower(struct ath_hw *ah, u8 txpower) p_pwr_array[i] = MAX_RATE_POWER; } - REG_WRITE(ah, 0xa458, 0); - - REG_WRITE(ah, 0xa3c0, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0)); - REG_WRITE(ah, 0xa3c4, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_54], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_48], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_36], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0)); - REG_WRITE(ah, 0xa3c8, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0)); - REG_WRITE(ah, 0xa3cc, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11S], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11L], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_5S], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0)); - REG_WRITE(ah, 0xa3d0, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_5], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_4], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_1_3_9_11_17_19], 8)| - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_0_8_16], 0)); - REG_WRITE(ah, 0xa3d4, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_13], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_12], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_7], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_6], 0)); - REG_WRITE(ah, 0xa3e4, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_21], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_20], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_15], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_14], 0)); - REG_WRITE(ah, 0xa3e8, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_23], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_22], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_23], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_22], 0)); - REG_WRITE(ah, 0xa3d8, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_5], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_4], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_1_3_9_11_17_19], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_0_8_16], 0)); - REG_WRITE(ah, 0xa3dc, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_13], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_12], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_7], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_6], 0)); - REG_WRITE(ah, 0xa3ec, - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_21], 24) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_20], 16) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_15], 8) | - ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_14], 0)); + ar9003_hw_tx_power_regwrite(ah, p_pwr_array); } static void ar9003_hw_init_txpower_cck(struct ath_hw *ah, u8 *rate_array) -- cgit v1.1 From e7ae328961ffcf78bb18d0ecdb1e5a50d1185336 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 28 Apr 2016 16:45:05 +0200 Subject: ath9k: Move TX99 config option under ath9k debugging Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there such that "make menuconfig" will indent TX99 support below ath9k debugging. Signed-off-by: Helmut Schaa Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/Kconfig | 40 +++++++++++++++++----------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 40fa915..f68cb00 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -75,6 +75,26 @@ config ATH9K_STATION_STATISTICS ---help--- This option enables detailed statistics for association stations. +config ATH9K_TX99 + bool "Atheros ath9k TX99 testing support" + depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + Say N. This should only be enabled on systems undergoing + certification testing and evaluation in a controlled environment. + Enabling this will only enable TX99 support, all other modes of + operation will be disabled. + + TX99 support enables Specific Absorption Rate (SAR) testing. + SAR is the unit of measurement for the amount of radio frequency(RF) + absorbed by the body when using a wireless device. The RF exposure + limits used are expressed in the terms of SAR, which is a measure + of the electric and magnetic field strength and power density for + transmitters operating at frequencies from 300 kHz to 100 GHz. + Regulatory bodies around the world require that wireless device + be evaluated to meet the RF exposure limits set forth in the + governmental SAR regulations. + config ATH9K_DFS_CERTIFIED bool "Atheros DFS support for certified platforms" depends on ATH9K && CFG80211_CERTIFICATION_ONUS @@ -103,26 +123,6 @@ config ATH9K_DYNACK based on ACK frame RX timestamp, TX frame timestamp and frame duration -config ATH9K_TX99 - bool "Atheros ath9k TX99 testing support" - depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS - default n - ---help--- - Say N. This should only be enabled on systems undergoing - certification testing and evaluation in a controlled environment. - Enabling this will only enable TX99 support, all other modes of - operation will be disabled. - - TX99 support enables Specific Absorption Rate (SAR) testing. - SAR is the unit of measurement for the amount of radio frequency(RF) - absorbed by the body when using a wireless device. The RF exposure - limits used are expressed in the terms of SAR, which is a measure - of the electric and magnetic field strength and power density for - transmitters operating at frequencies from 300 kHz to 100 GHz. - Regulatory bodies around the world require that wireless device - be evaluated to meet the RF exposure limits set forth in the - governmental SAR regulations. - config ATH9K_WOW bool "Wake on Wireless LAN support (EXPERIMENTAL)" depends on ATH9K && PM -- cgit v1.1 From b0291715d31c891bcb5de936271881f58600f7c1 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 28 Apr 2016 16:45:06 +0200 Subject: ath9k: Simplify ar9003_hw_tx99_set_txpower There's no need to keep the same for loop twice in the code. Move the txpower cap before the loop to reduce code complexity. Signed-off-by: Helmut Schaa Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2f15cbc..81ab3ca 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1844,13 +1844,9 @@ static void ar9003_hw_tx99_set_txpower(struct ath_hw *ah, u8 txpower) static u8 p_pwr_array[ar9300RateSize] = { 0 }; unsigned int i; - if (txpower <= MAX_RATE_POWER) { - for (i = 0; i < ar9300RateSize; i++) - p_pwr_array[i] = txpower; - } else { - for (i = 0; i < ar9300RateSize; i++) - p_pwr_array[i] = MAX_RATE_POWER; - } + txpower = txpower <= MAX_RATE_POWER ? txpower : MAX_RATE_POWER; + for (i = 0; i < ar9300RateSize; i++) + p_pwr_array[i] = txpower; ar9003_hw_tx_power_regwrite(ah, p_pwr_array); } -- cgit v1.1 From 41842dc1f072d69ca40f36ce5032ccfd23488f51 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 29 Apr 2016 15:06:34 +0200 Subject: ath9k: Fix symbol overlap window for half/quarter channels Since commit cd6cfd7311a385144a2f9c74f692ae2df3ae033f "ath9k: do not set half/quarter channel flags in AR_PHY_MODE" the condition "rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)" would never evaluate to true. Fix this by using the available IS_CHAN_HALF_RATE and IS_CHAN_QUARTER_RATE marcros instead. Signed-off-by: Helmut Schaa Cc: Felix Fietkau Acked-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 81ab3ca..ae304355 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1010,7 +1010,7 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah, if (IS_CHAN_A_FAST_CLOCK(ah, chan)) rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); - if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)) + if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW, 3); -- cgit v1.1 From de24f638025a0bfef2ea81396382358df2c7c875 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 4 Aug 2015 15:19:18 +0300 Subject: iwlwifi: mvm: allocate queue for probe response in dqa mode In DQA mode, allocate a dedicated queue (#9) for P2P GO/soft AP probe responses. Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 3 ++ drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 6 ++++ drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 44 ++++++++++++++++++----- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 26 +++++++++++--- 4 files changed, 66 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h index 60eed84..206fd89 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h @@ -97,6 +97,8 @@ enum { * Each MGMT queue is mapped to a single STA * MGMT frames are frames that return true on ieee80211_is_mgmt() * @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames + * @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe + * responses * @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames. * DATA frames are intended for !ieee80211_is_mgmt() frames, but if * the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues @@ -109,6 +111,7 @@ enum iwl_mvm_dqa_txq { IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4, IWL_MVM_DQA_MIN_MGMT_QUEUE = 5, IWL_MVM_DQA_MAX_MGMT_QUEUE = 8, + IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9, IWL_MVM_DQA_MIN_DATA_QUEUE = 10, IWL_MVM_DQA_MAX_DATA_QUEUE = 31, }; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index 456067b..0bcd8c7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -540,6 +540,12 @@ void iwl_mvm_mac_ctxt_release(struct iwl_mvm *mvm, struct ieee80211_vif *vif) case NL80211_IFTYPE_AP: iwl_mvm_disable_txq(mvm, vif->cab_queue, vif->cab_queue, IWL_MAX_TID_COUNT, 0); + + if (iwl_mvm_is_dqa_supported(mvm)) + iwl_mvm_disable_txq(mvm, + IWL_MVM_DQA_AP_PROBE_RESP_QUEUE, + vif->hw_queue[0], IWL_MAX_TID_COUNT, + 0); /* fall through */ default: /* diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 12614b7..5350ca6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1000,6 +1000,29 @@ int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) lockdep_assert_held(&mvm->mutex); + if (iwl_mvm_is_dqa_supported(mvm)) { + struct iwl_trans_txq_scd_cfg cfg = { + .fifo = IWL_MVM_TX_FIFO_VO, + .sta_id = mvmvif->bcast_sta.sta_id, + .tid = IWL_MAX_TID_COUNT, + .aggregate = false, + .frame_limit = IWL_FRAME_LIMIT, + }; + unsigned int wdg_timeout = + iwl_mvm_get_wd_timeout(mvm, vif, false, false); + int queue; + + if ((vif->type == NL80211_IFTYPE_AP) && + (mvmvif->bcast_sta.tfd_queue_msk & + BIT(IWL_MVM_DQA_AP_PROBE_RESP_QUEUE))) + queue = IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; + else if (WARN(1, "Missed required TXQ for adding bcast STA\n")) + return -EINVAL; + + iwl_mvm_enable_txq(mvm, queue, vif->hw_queue[0], 0, &cfg, + wdg_timeout); + } + if (vif->type == NL80211_IFTYPE_ADHOC) baddr = vif->bss_conf.bssid; @@ -1028,20 +1051,25 @@ int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - u32 qmask; + u32 qmask = 0; lockdep_assert_held(&mvm->mutex); - qmask = iwl_mvm_mac_get_queues_mask(vif); + if (!iwl_mvm_is_dqa_supported(mvm)) + qmask = iwl_mvm_mac_get_queues_mask(vif); - /* - * The firmware defines the TFD queue mask to only be relevant - * for *unicast* queues, so the multicast (CAB) queue shouldn't - * be included. - */ - if (vif->type == NL80211_IFTYPE_AP) + if (vif->type == NL80211_IFTYPE_AP) { + /* + * The firmware defines the TFD queue mask to only be relevant + * for *unicast* queues, so the multicast (CAB) queue shouldn't + * be included. + */ qmask &= ~BIT(vif->cab_queue); + if (iwl_mvm_is_dqa_supported(mvm)) + qmask |= BIT(IWL_MVM_DQA_AP_PROBE_RESP_QUEUE); + } + return iwl_mvm_allocate_int_sta(mvm, &mvmvif->bcast_sta, qmask, ieee80211_vif_type_p2p(vif)); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index c53aa0f..b4ac530f4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -475,6 +475,17 @@ iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb, return dev_cmd; } +static int iwl_mvm_get_ctrl_vif_queue(struct iwl_mvm *mvm, + struct ieee80211_tx_info *info, __le16 fc) +{ + if (iwl_mvm_is_dqa_supported(mvm) && + info->control.vif->type == NL80211_IFTYPE_AP && + ieee80211_is_probe_resp(fc)) + return IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; + + return info->hw_queue; +} + int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -484,6 +495,7 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) struct iwl_tx_cmd *tx_cmd; u8 sta_id; int hdrlen = ieee80211_hdrlen(hdr->frame_control); + int queue; memcpy(&info, skb->cb, sizeof(info)); @@ -508,6 +520,8 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) info.control.vif->type == NL80211_IFTYPE_STATION) IEEE80211_SKB_CB(skb)->hw_queue = mvm->aux_queue; + queue = info.hw_queue; + /* * If the interface on which the frame is sent is the P2P_DEVICE * or an AP/GO interface use the broadcast station associated @@ -523,10 +537,12 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) iwl_mvm_vif_from_mac80211(info.control.vif); if (info.control.vif->type == NL80211_IFTYPE_P2P_DEVICE || - info.control.vif->type == NL80211_IFTYPE_AP) + info.control.vif->type == NL80211_IFTYPE_AP) { sta_id = mvmvif->bcast_sta.sta_id; - else if (info.control.vif->type == NL80211_IFTYPE_STATION && - is_multicast_ether_addr(hdr->addr1)) { + queue = iwl_mvm_get_ctrl_vif_queue(mvm, &info, + hdr->frame_control); + } else if (info.control.vif->type == NL80211_IFTYPE_STATION && + is_multicast_ether_addr(hdr->addr1)) { u8 ap_sta_id = ACCESS_ONCE(mvmvif->ap_sta_id); if (ap_sta_id != IWL_MVM_STATION_COUNT) @@ -534,7 +550,7 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) } } - IWL_DEBUG_TX(mvm, "station Id %d, queue=%d\n", sta_id, info.hw_queue); + IWL_DEBUG_TX(mvm, "station Id %d, queue=%d\n", sta_id, queue); dev_cmd = iwl_mvm_set_tx_params(mvm, skb, &info, hdrlen, NULL, sta_id); if (!dev_cmd) @@ -545,7 +561,7 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx_cmd->hdr, hdr, hdrlen); - if (iwl_trans_tx(mvm->trans, skb, dev_cmd, info.hw_queue)) { + if (iwl_trans_tx(mvm->trans, skb, dev_cmd, queue)) { iwl_trans_free_tx_cmd(mvm->trans, dev_cmd); return -1; } -- cgit v1.1 From 4c965139a3cdd7211b74ce27eccf9bb7485cd58a Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Sun, 9 Aug 2015 19:26:56 +0300 Subject: iwlwifi: mvm: support p2p device frames tx on dqa queue #2 Support sending P2P device frames should be sent from queue #2, as required in DQA mode. Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 2 ++ drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 16 ++++++++++------ drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 7 +++++++ drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 ++++++++---- 4 files changed, 27 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h index 206fd89..41b80ae 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h @@ -90,6 +90,7 @@ enum { * DQA queue numbers * * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW + * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure * that we are never left without the possibility to connect to an AP. @@ -107,6 +108,7 @@ enum { */ enum iwl_mvm_dqa_txq { IWL_MVM_DQA_CMD_QUEUE = 0, + IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2, IWL_MVM_DQA_GCAST_QUEUE = 3, IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4, IWL_MVM_DQA_MIN_MGMT_QUEUE = 5, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index 0bcd8c7..7aae068 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -501,9 +501,11 @@ int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif) switch (vif->type) { case NL80211_IFTYPE_P2P_DEVICE: - iwl_mvm_enable_ac_txq(mvm, IWL_MVM_OFFCHANNEL_QUEUE, - IWL_MVM_OFFCHANNEL_QUEUE, - IWL_MVM_TX_FIFO_VO, 0, wdg_timeout); + if (!iwl_mvm_is_dqa_supported(mvm)) + iwl_mvm_enable_ac_txq(mvm, IWL_MVM_OFFCHANNEL_QUEUE, + IWL_MVM_OFFCHANNEL_QUEUE, + IWL_MVM_TX_FIFO_VO, 0, + wdg_timeout); break; case NL80211_IFTYPE_AP: iwl_mvm_enable_ac_txq(mvm, vif->cab_queue, vif->cab_queue, @@ -533,9 +535,11 @@ void iwl_mvm_mac_ctxt_release(struct iwl_mvm *mvm, struct ieee80211_vif *vif) switch (vif->type) { case NL80211_IFTYPE_P2P_DEVICE: - iwl_mvm_disable_txq(mvm, IWL_MVM_OFFCHANNEL_QUEUE, - IWL_MVM_OFFCHANNEL_QUEUE, IWL_MAX_TID_COUNT, - 0); + if (!iwl_mvm_is_dqa_supported(mvm)) + iwl_mvm_disable_txq(mvm, IWL_MVM_OFFCHANNEL_QUEUE, + IWL_MVM_OFFCHANNEL_QUEUE, + IWL_MAX_TID_COUNT, 0); + break; case NL80211_IFTYPE_AP: iwl_mvm_disable_txq(mvm, vif->cab_queue, vif->cab_queue, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 5350ca6..701511d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1016,6 +1016,10 @@ int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) (mvmvif->bcast_sta.tfd_queue_msk & BIT(IWL_MVM_DQA_AP_PROBE_RESP_QUEUE))) queue = IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; + else if ((vif->type == NL80211_IFTYPE_P2P_DEVICE) && + (mvmvif->bcast_sta.tfd_queue_msk & + BIT(IWL_MVM_DQA_P2P_DEVICE_QUEUE))) + queue = IWL_MVM_DQA_P2P_DEVICE_QUEUE; else if (WARN(1, "Missed required TXQ for adding bcast STA\n")) return -EINVAL; @@ -1068,6 +1072,9 @@ int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) if (iwl_mvm_is_dqa_supported(mvm)) qmask |= BIT(IWL_MVM_DQA_AP_PROBE_RESP_QUEUE); + } else if (iwl_mvm_is_dqa_supported(mvm) && + vif->type == NL80211_IFTYPE_P2P_DEVICE) { + qmask |= BIT(IWL_MVM_DQA_P2P_DEVICE_QUEUE); } return iwl_mvm_allocate_int_sta(mvm, &mvmvif->bcast_sta, qmask, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index b4ac530f4..a8e5a67 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -478,10 +478,14 @@ iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb, static int iwl_mvm_get_ctrl_vif_queue(struct iwl_mvm *mvm, struct ieee80211_tx_info *info, __le16 fc) { - if (iwl_mvm_is_dqa_supported(mvm) && - info->control.vif->type == NL80211_IFTYPE_AP && - ieee80211_is_probe_resp(fc)) - return IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; + if (iwl_mvm_is_dqa_supported(mvm)) { + if (info->control.vif->type == NL80211_IFTYPE_AP && + ieee80211_is_probe_resp(fc)) + return IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; + else if (ieee80211_is_mgmt(fc) && + info->control.vif->type == NL80211_IFTYPE_P2P_DEVICE) + return IWL_MVM_DQA_P2P_DEVICE_QUEUE; + } return info->hw_queue; } -- cgit v1.1 From e5ed17929bf4177c523465af187ab70c9a454caa Mon Sep 17 00:00:00 2001 From: Mordechai Goodstein Date: Tue, 29 Mar 2016 14:41:49 +0300 Subject: iwlwifi: Edit the 8265 SDIO ID Add new 8265 series SDIO ID. Signed-off-by: Mordechai Goodstein Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-8000.c | 14 ++++++++++++++ drivers/net/wireless/intel/iwlwifi/iwl-config.h | 1 + 2 files changed, 15 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c index 2d20556..d6bff16 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c @@ -237,6 +237,20 @@ const struct iwl_cfg iwl8260_2ac_sdio_cfg = { .max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO, }; +const struct iwl_cfg iwl8265_2ac_sdio_cfg = { + .name = "Intel(R) Dual Band Wireless-AC 8265", + .fw_name_pre = IWL8265_FW_PRE, + IWL_DEVICE_8265, + .ht_params = &iwl8000_ht_params, + .nvm_ver = IWL8000_NVM_VERSION, + .nvm_calib_ver = IWL8000_TX_POWER_VERSION, + .max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO, + .max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO, + .disable_dummy_notification = true, + .max_ht_ampdu_exponent = MAX_HT_AMPDU_EXPONENT_8260_SDIO, + .max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO, +}; + const struct iwl_cfg iwl4165_2ac_sdio_cfg = { .name = "Intel(R) Dual Band Wireless-AC 4165", .fw_name_pre = IWL8000_FW_PRE, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 7206798..95558e3 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -437,6 +437,7 @@ extern const struct iwl_cfg iwl8260_2ac_cfg; extern const struct iwl_cfg iwl8265_2ac_cfg; extern const struct iwl_cfg iwl4165_2ac_cfg; extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; +extern const struct iwl_cfg iwl8265_2ac_sdio_cfg; extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; extern const struct iwl_cfg iwl9560_2ac_cfg; extern const struct iwl_cfg iwl5165_2ac_cfg; -- cgit v1.1 From 251a9605ab882998009002bf1f5176a049beba53 Mon Sep 17 00:00:00 2001 From: Shengzhen Li Date: Tue, 26 Apr 2016 07:25:45 -0700 Subject: mwifiex: change sleep cookie poll count Sometimes current polling count is not sufficient. This patch increases it to 100. Signed-off-by: Shengzhen Li Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/pcie.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h index 5770b43..9a1d09d 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.h +++ b/drivers/net/wireless/marvell/mwifiex/pcie.h @@ -117,7 +117,7 @@ /* FW awake cookie after FW ready */ #define FW_AWAKE_COOKIE (0xAA55AA55) #define MWIFIEX_DEF_SLEEP_COOKIE 0xBEEFBEEF -#define MWIFIEX_MAX_DELAY_COUNT 5 +#define MWIFIEX_MAX_DELAY_COUNT 100 struct mwifiex_pcie_card_reg { u16 cmd_addr_lo; -- cgit v1.1 From 0636b938214c90c3a7d145ad86b64a061bb10c50 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Thu, 18 Feb 2016 14:21:12 +0200 Subject: iwlwifi: mvm: implement driver RX queues sync command mac80211 will call the driver whenever there is a race between RSS queues and control path that requires a processing of all pending frames in RSS queues. Implement that by utilizing the internal notification mechanism: queue a message to all queues. When the message is received on a queue it decrements the atomic counter. This guarantees that all pending frames in the RX queue were processed since the message is in order inside the queue. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h | 4 ++ drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 43 ++++++++++++++++++++++ drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 2 + drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 7 ++++ 5 files changed, 58 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h index 4c086d0..ade170b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h @@ -437,9 +437,11 @@ struct iwl_rxq_sync_notification { /** * Internal message identifier * +* @IWL_MVM_RXQ_SYNC: sync RSS queues * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA */ enum iwl_mvm_rxq_notif_type { + IWL_MVM_RXQ_SYNC, IWL_MVM_RXQ_NOTIF_DEL_BA, }; @@ -448,10 +450,12 @@ enum iwl_mvm_rxq_notif_type { * in &iwl_rxq_sync_cmd. Should be DWORD aligned. * * @type: value from &iwl_mvm_rxq_notif_type +* @cookie: internal cookie to identify old notifications * @data: payload */ struct iwl_mvm_internal_rxq_notif { u32 type; + u32 cookie; u8 data[]; } __packed; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 5ace468..d6ad77a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4037,6 +4037,47 @@ static void iwl_mvm_mac_event_callback(struct ieee80211_hw *hw, } } +static void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm) +{ + struct iwl_mvm_internal_rxq_notif data = { + .type = IWL_MVM_RXQ_SYNC, + .cookie = mvm->queue_sync_cookie, + }; + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(notif_waitq); + u32 qmask = BIT(mvm->trans->num_rx_queues) - 1; + int ret; + + lockdep_assert_held(&mvm->mutex); + + if (!iwl_mvm_has_new_rx_api(mvm)) + return; + + atomic_set(&mvm->queue_sync_counter, mvm->trans->num_rx_queues); + + ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)&data, sizeof(data)); + if (ret) { + IWL_ERR(mvm, "Failed to trigger RX queues sync (%d)\n", ret); + goto out; + } + ret = wait_event_timeout(notif_waitq, + atomic_read(&mvm->queue_sync_counter) == 0, + HZ); + WARN_ON_ONCE(!ret); + +out: + atomic_set(&mvm->queue_sync_counter, 0); + mvm->queue_sync_cookie++; +} + +static void iwl_mvm_sync_rx_queues(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + mutex_lock(&mvm->mutex); + iwl_mvm_sync_rx_queues_internal(mvm); + mutex_unlock(&mvm->mutex); +} + const struct ieee80211_ops iwl_mvm_hw_ops = { .tx = iwl_mvm_mac_tx, .ampdu_action = iwl_mvm_mac_ampdu_action, @@ -4093,6 +4134,8 @@ const struct ieee80211_ops iwl_mvm_hw_ops = { .event_callback = iwl_mvm_mac_event_callback, + .sync_rx_queues = iwl_mvm_sync_rx_queues, + CFG80211_TESTMODE_CMD(iwl_mvm_mac_testmode_cmd) #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 85800ba..c7c8a62 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -633,6 +633,8 @@ struct iwl_mvm { unsigned long status; + u32 queue_sync_cookie; + atomic_t queue_sync_counter; /* * for beacon filtering - * currently only one interface can be supported diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 8bfb8e0..7c6a598 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -586,6 +586,8 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, skb_queue_head_init(&mvm->d0i3_tx); init_waitqueue_head(&mvm->d0i3_exit_waitq); + atomic_set(&mvm->queue_sync_counter, 0); + SET_IEEE80211_DEV(mvm->hw, mvm->trans->dev); /* diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 651604d..b4d9c42 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -406,6 +406,13 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, internal_notif = (void *)notif->payload; switch (internal_notif->type) { + case IWL_MVM_RXQ_SYNC: + if (mvm->queue_sync_cookie == internal_notif->cookie) + atomic_dec(&mvm->queue_sync_counter); + else + WARN_ONCE(1, + "Received expired RX queue sync message\n"); + break; case IWL_MVM_RXQ_NOTIF_DEL_BA: /* TODO */ break; -- cgit v1.1 From d0ff5d2297aa03f346c82d8c90528f00f90ea26d Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Wed, 23 Mar 2016 16:31:43 +0200 Subject: iwlwifi: mvm: change RX sync notification to be an attribute and not a type Currently the sync notification is a type of notification. However, it is better fitted as an attribute of a notification, since there might be another message in the payload (delba for instance) that should be sent while control path is waiting for all queues to process. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h | 9 ++++--- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 30 ++++++++++++++-------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 3 +++ drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 15 ++++++----- 4 files changed, 37 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h index ade170b..1ca8e49 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h @@ -437,24 +437,27 @@ struct iwl_rxq_sync_notification { /** * Internal message identifier * -* @IWL_MVM_RXQ_SYNC: sync RSS queues +* @IWL_MVM_RXQ_EMPTY: empty sync notification * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA */ enum iwl_mvm_rxq_notif_type { - IWL_MVM_RXQ_SYNC, + IWL_MVM_RXQ_EMPTY, IWL_MVM_RXQ_NOTIF_DEL_BA, }; /** * struct iwl_mvm_internal_rxq_notif - Internal representation of the data sent * in &iwl_rxq_sync_cmd. Should be DWORD aligned. +* FW is agnostic to the payload, so there are no endianity requirements. * * @type: value from &iwl_mvm_rxq_notif_type +* @sync: ctrl path is waiting for all notifications to be received * @cookie: internal cookie to identify old notifications * @data: payload */ struct iwl_mvm_internal_rxq_notif { - u32 type; + u16 type; + u16 sync; u32 cookie; u8 data[]; } __packed; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index d6ad77a..f746ff6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4037,12 +4037,10 @@ static void iwl_mvm_mac_event_callback(struct ieee80211_hw *hw, } } -static void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm) +void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, + struct iwl_mvm_internal_rxq_notif *notif, + u32 size) { - struct iwl_mvm_internal_rxq_notif data = { - .type = IWL_MVM_RXQ_SYNC, - .cookie = mvm->queue_sync_cookie, - }; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(notif_waitq); u32 qmask = BIT(mvm->trans->num_rx_queues) - 1; int ret; @@ -4052,16 +4050,22 @@ static void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm) if (!iwl_mvm_has_new_rx_api(mvm)) return; - atomic_set(&mvm->queue_sync_counter, mvm->trans->num_rx_queues); + notif->cookie = mvm->queue_sync_cookie; + + if (notif->sync) + atomic_set(&mvm->queue_sync_counter, + mvm->trans->num_rx_queues); - ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)&data, sizeof(data)); + ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)notif, size); if (ret) { IWL_ERR(mvm, "Failed to trigger RX queues sync (%d)\n", ret); goto out; } - ret = wait_event_timeout(notif_waitq, - atomic_read(&mvm->queue_sync_counter) == 0, - HZ); + + if (notif->sync) + ret = wait_event_timeout(notif_waitq, + atomic_read(&mvm->queue_sync_counter) == 0, + HZ); WARN_ON_ONCE(!ret); out: @@ -4072,9 +4076,13 @@ out: static void iwl_mvm_sync_rx_queues(struct ieee80211_hw *hw) { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_internal_rxq_notif data = { + .type = IWL_MVM_RXQ_EMPTY, + .sync = 1, + }; mutex_lock(&mvm->mutex); - iwl_mvm_sync_rx_queues_internal(mvm); + iwl_mvm_sync_rx_queues_internal(mvm, &data, sizeof(data)); mutex_unlock(&mvm->mutex); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index c7c8a62..14b5f6a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1630,6 +1630,9 @@ void iwl_mvm_tdls_cancel_channel_switch(struct ieee80211_hw *hw, void iwl_mvm_rx_tdls_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); void iwl_mvm_tdls_ch_switch_work(struct work_struct *work); +void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, + struct iwl_mvm_internal_rxq_notif *notif, + u32 size); struct ieee80211_vif *iwl_mvm_get_bss_vif(struct iwl_mvm *mvm); void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index b4d9c42..306dd9b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -405,16 +405,19 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, notif = (void *)pkt->data; internal_notif = (void *)notif->payload; - switch (internal_notif->type) { - case IWL_MVM_RXQ_SYNC: - if (mvm->queue_sync_cookie == internal_notif->cookie) - atomic_dec(&mvm->queue_sync_counter); - else + if (internal_notif->sync) { + if (mvm->queue_sync_cookie != internal_notif->cookie) { WARN_ONCE(1, "Received expired RX queue sync message\n"); + return; + } + atomic_dec(&mvm->queue_sync_counter); + } + + switch (internal_notif->type) { + case IWL_MVM_RXQ_EMPTY: break; case IWL_MVM_RXQ_NOTIF_DEL_BA: - /* TODO */ break; default: WARN_ONCE(1, "Invalid identifier %d", internal_notif->type); -- cgit v1.1 From 10b2b2019d810f6cc6cc1461615371014d0d11c8 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 20 Mar 2016 16:23:41 +0200 Subject: iwlwifi: mvm: add infrastructure for tracking BA session in driver According to the spec when a BA session is started there is a timeout set for the session in the ADDBA request. If there is not activity on the TA/TID then the session expires and a DELBA is sent. In order to check for the timeout, data must be shared among the rx queues. Add a timer that runs as long as BA session is active for the station and stops aggregation session if needed. This patch also lays the infrastructure for the reordering buffer which will be enabled in the next patches. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- .../net/wireless/intel/iwlwifi/mvm/fw-api-sta.h | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 7 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 25 ++++ drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 35 ++++++ drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 130 +++++++++++++++++++-- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 4 +- 6 files changed, 194 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h index 90d9113..e896648 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h @@ -255,8 +255,10 @@ struct iwl_mvm_keyinfo { __le64 hw_tkip_mic_tx_key; } __packed; -#define IWL_ADD_STA_STATUS_MASK 0xFF -#define IWL_ADD_STA_BAID_MASK 0xFF00 +#define IWL_ADD_STA_STATUS_MASK 0xFF +#define IWL_ADD_STA_BAID_VALID_MASK 0x8000 +#define IWL_ADD_STA_BAID_MASK 0x7F00 +#define IWL_ADD_STA_BAID_SHIFT 8 /** * struct iwl_mvm_add_sta_cmd_v7 - Add/modify a station in the fw's sta table. diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index f746ff6..ae441c5 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -848,6 +848,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, u16 *ssn = ¶ms->ssn; u8 buf_size = params->buf_size; bool amsdu = params->amsdu; + u16 timeout = params->timeout; IWL_DEBUG_HT(mvm, "A-MPDU action on addr %pM tid %d: action %d\n", sta->addr, tid, action); @@ -888,10 +889,12 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, ret = -EINVAL; break; } - ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, *ssn, true, buf_size); + ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, *ssn, true, buf_size, + timeout); break; case IEEE80211_AMPDU_RX_STOP: - ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false, buf_size); + ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false, buf_size, + timeout); break; case IEEE80211_AMPDU_TX_START: if (!iwl_enable_tx_ampdu(mvm->cfg)) { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 14b5f6a..ea1817a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -613,6 +613,27 @@ struct iwl_mvm_shared_mem_cfg { u32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM]; }; +/** + * struct iwl_mvm_baid_data - BA session data + * @sta_id: station id + * @tid: tid of the session + * @baid baid of the session + * @timeout: the timeout set in the addba request + * @last_rx: last rx jiffies, updated only if timeout passed from last update + * @session_timer: timer to check if BA session expired, runs at 2 * timeout + * @mvm: mvm pointer, needed for timer context + */ +struct iwl_mvm_baid_data { + struct rcu_head rcu_head; + u8 sta_id; + u8 tid; + u8 baid; + u16 timeout; + unsigned long last_rx; + struct timer_list session_timer; + struct iwl_mvm *mvm; +}; + struct iwl_mvm { /* for logger access */ struct device *dev; @@ -922,6 +943,10 @@ struct iwl_mvm { u32 ciphers[6]; struct iwl_mvm_tof_data tof_data; + struct ieee80211_vif *nan_vif; +#define IWL_MAX_BAID 32 + struct iwl_mvm_baid_data __rcu *baid_map[IWL_MAX_BAID]; + /* * Drop beacons from other APs in AP mode when there are no connected * clients. diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 306dd9b..8d5717b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -424,6 +424,36 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, } } +static void iwl_mvm_agg_rx_received(struct iwl_mvm *mvm, u8 baid) +{ + unsigned long now = jiffies; + unsigned long timeout; + struct iwl_mvm_baid_data *data; + + rcu_read_lock(); + + data = rcu_dereference(mvm->baid_map[baid]); + if (WARN_ON(!data)) + goto out; + + if (!data->timeout) + goto out; + + timeout = data->timeout; + /* + * Do not update last rx all the time to avoid cache bouncing + * between the rx queues. + * Update it every timeout. Worst case is the session will + * expire after ~ 2 * timeout, which doesn't matter that much. + */ + if (time_before(data->last_rx + TU_TO_JIFFIES(timeout), now)) + /* Update is atomic */ + data->last_rx = now; + +out: + rcu_read_unlock(); +} + void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue) { @@ -494,6 +524,9 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, if (sta) { struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + u8 baid = (u8)((le32_to_cpu(desc->reorder_data) & + IWL_RX_MPDU_REORDER_BAID_MASK) >> + IWL_RX_MPDU_REORDER_BAID_SHIFT); /* * We have tx blocked stations (with CS bit). If we heard @@ -546,6 +579,8 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, *qc &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT; } + if (baid != IWL_RX_REORDER_DATA_INVALID_BAID) + iwl_mvm_agg_rx_received(mvm, baid); } /* diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 701511d..4fb4c4e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -223,6 +223,39 @@ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, return ret; } +static void iwl_mvm_rx_agg_session_expired(unsigned long data) +{ + struct iwl_mvm_baid_data __rcu **rcu_ptr = (void *)data; + struct iwl_mvm_baid_data *ba_data; + struct ieee80211_sta *sta; + struct iwl_mvm_sta *mvm_sta; + unsigned long timeout; + + rcu_read_lock(); + + ba_data = rcu_dereference(*rcu_ptr); + + if (WARN_ON(!ba_data)) + goto unlock; + + if (!ba_data->timeout) + goto unlock; + + timeout = ba_data->last_rx + TU_TO_JIFFIES(ba_data->timeout * 2); + if (time_is_after_jiffies(timeout)) { + mod_timer(&ba_data->session_timer, timeout); + goto unlock; + } + + /* Timer expired */ + sta = rcu_dereference(ba_data->mvm->fw_id_to_mac_id[ba_data->sta_id]); + mvm_sta = iwl_mvm_sta_from_mac80211(sta); + ieee80211_stop_rx_ba_session_offl(mvm_sta->vif, + sta->addr, ba_data->tid); +unlock: + rcu_read_unlock(); +} + static int iwl_mvm_tdls_sta_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta) { @@ -1134,11 +1167,22 @@ int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) #define IWL_MAX_RX_BA_SESSIONS 16 +static void iwl_mvm_sync_rxq_del_ba(struct iwl_mvm *mvm) +{ + struct iwl_mvm_internal_rxq_notif data = { + .type = IWL_MVM_RXQ_EMPTY, + .sync = 1, + }; + + iwl_mvm_sync_rx_queues_internal(mvm, &data, sizeof(data)); +} + int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - int tid, u16 ssn, bool start, u8 buf_size) + int tid, u16 ssn, bool start, u8 buf_size, u16 timeout) { struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); struct iwl_mvm_add_sta_cmd cmd = {}; + struct iwl_mvm_baid_data *baid_data = NULL; int ret; u32 status; @@ -1149,6 +1193,16 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, return -ENOSPC; } + if (iwl_mvm_has_new_rx_api(mvm) && start) { + /* + * Allocate here so if allocation fails we can bail out early + * before starting the BA session in the firmware + */ + baid_data = kzalloc(sizeof(*baid_data), GFP_KERNEL); + if (!baid_data) + return -ENOMEM; + } + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); cmd.sta_id = mvm_sta->sta_id; cmd.add_modify = STA_MODE_MODIFY; @@ -1167,7 +1221,7 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, iwl_mvm_add_sta_cmd_size(mvm), &cmd, &status); if (ret) - return ret; + goto out_free; switch (status & IWL_ADD_STA_STATUS_MASK) { case ADD_STA_SUCCESS: @@ -1185,14 +1239,74 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, break; } - if (!ret) { - if (start) - mvm->rx_ba_sessions++; - else if (mvm->rx_ba_sessions > 0) - /* check that restart flow didn't zero the counter */ - mvm->rx_ba_sessions--; + if (ret) + goto out_free; + + if (start) { + u8 baid; + + mvm->rx_ba_sessions++; + + if (!iwl_mvm_has_new_rx_api(mvm)) + return 0; + + if (WARN_ON(!(status & IWL_ADD_STA_BAID_VALID_MASK))) { + ret = -EINVAL; + goto out_free; + } + baid = (u8)((status & IWL_ADD_STA_BAID_MASK) >> + IWL_ADD_STA_BAID_SHIFT); + baid_data->baid = baid; + baid_data->timeout = timeout; + baid_data->last_rx = jiffies; + init_timer(&baid_data->session_timer); + baid_data->session_timer.function = + iwl_mvm_rx_agg_session_expired; + baid_data->session_timer.data = + (unsigned long)&mvm->baid_map[baid]; + baid_data->mvm = mvm; + baid_data->tid = tid; + baid_data->sta_id = mvm_sta->sta_id; + + mvm_sta->tid_to_baid[tid] = baid; + if (timeout) + mod_timer(&baid_data->session_timer, + TU_TO_EXP_TIME(timeout * 2)); + + /* + * protect the BA data with RCU to cover a case where our + * internal RX sync mechanism will timeout (not that it's + * supposed to happen) and we will free the session data while + * RX is being processed in parallel + */ + WARN_ON(rcu_access_pointer(mvm->baid_map[baid])); + rcu_assign_pointer(mvm->baid_map[baid], baid_data); + } else if (mvm->rx_ba_sessions > 0) { + u8 baid = mvm_sta->tid_to_baid[tid]; + + /* check that restart flow didn't zero the counter */ + mvm->rx_ba_sessions--; + if (!iwl_mvm_has_new_rx_api(mvm)) + return 0; + + if (WARN_ON(baid == IWL_RX_REORDER_DATA_INVALID_BAID)) + return -EINVAL; + + baid_data = rcu_access_pointer(mvm->baid_map[baid]); + if (WARN_ON(!baid_data)) + return -EINVAL; + + /* synchronize all rx queues so we can safely delete */ + iwl_mvm_sync_rxq_del_ba(mvm); + del_timer_sync(&baid_data->session_timer); + + RCU_INIT_POINTER(mvm->baid_map[baid], NULL); + kfree_rcu(baid_data, rcu_head); } + return 0; +out_free: + kfree(baid_data); return ret; } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index e3efdcd..1226318 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -373,6 +373,7 @@ struct iwl_mvm_rxq_dup_data { * @lock: lock to protect the whole struct. Since %tid_data is access from Tx * and from Tx response flow, it needs a spinlock. * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data. + * @tid_to_baid: a simple map of TID to baid * @reserved_queue: the queue reserved for this STA for DQA purposes * Every STA has is given one reserved queue to allow it to operate. If no * such queue can be guaranteed, the STA addition will fail. @@ -406,6 +407,7 @@ struct iwl_mvm_sta { bool next_status_eosp; spinlock_t lock; struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1]; + u8 tid_to_baid[IWL_MAX_TID_COUNT]; struct iwl_lq_sta lq_sta; struct ieee80211_vif *vif; struct iwl_mvm_key_pn __rcu *ptk_pn[4]; @@ -487,7 +489,7 @@ void iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm, /* AMPDU */ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - int tid, u16 ssn, bool start, u8 buf_size); + int tid, u16 ssn, bool start, u8 buf_size, u16 timeout); int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid, u16 *ssn); int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, -- cgit v1.1 From 2dd493434db68f89c690a665e3ac3dad11b69134 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Mar 2016 11:57:01 +0200 Subject: iwlwifi: mvm: add firmware API name comment Add the firmware API name to the struct iwl_wowlan_gtk_status. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-d3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-d3.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-d3.h index eec52c5..5f22cc7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-d3.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-d3.h @@ -368,7 +368,7 @@ struct iwl_wowlan_gtk_status { u8 decrypt_key[16]; u8 tkip_mic_key[8]; struct iwl_wowlan_rsc_tsc_params_cmd rsc; -} __packed; +} __packed; /* WOWLAN_GTK_MATERIAL_VER_1 */ struct iwl_wowlan_status { struct iwl_wowlan_gtk_status gtk; -- cgit v1.1 From b915c10174fb7df533b7928046129c8f626cca42 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Wed, 23 Mar 2016 16:32:02 +0200 Subject: iwlwifi: mvm: add reorder buffer per queue Next hardware will direct packets to core based on the TCP/UDP streams. This logic can create holes in reorder buffer since packets that belong to other stream were directed to a different core. However, those are valid holes and the packets can be indicated in L3 order. The hardware will utilize a mechanism of informing the driver of the normalized ssn and the driver shall release all packets that SN is lower than the nssn. This enables managing the reorder across the queues without sharing any data between them. The reorder buffer is allocated and released directly in the RX path in order to avoid various races between control path and rx path. The code utilizes the internal messaging to notify rx queues of when to delete the reorder buffer. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 + drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 24 +++ drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 181 +++++++++++++++++++++- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 69 ++++++++- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 9 ++ 5 files changed, 276 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index ae441c5..6286063 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -439,6 +439,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) ieee80211_hw_set(hw, SUPPORTS_CLONED_SKBS); ieee80211_hw_set(hw, SUPPORTS_AMSDU_IN_AMPDU); ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR); + if (iwl_mvm_has_new_rx_api(mvm)) + ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER); if (mvm->trans->max_skb_frags) hw->netdev_features = NETIF_F_HIGHDMA | NETIF_F_SG; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index ea1817a..8272e54 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -614,6 +614,28 @@ struct iwl_mvm_shared_mem_cfg { }; /** + * struct iwl_mvm_reorder_buffer - per ra/tid/queue reorder buffer + * @head_sn: reorder window head sn + * @num_stored: number of mpdus stored in the buffer + * @buf_size: the reorder buffer size as set by the last addba request + * @sta_id: sta id of this reorder buffer + * @queue: queue of this reorder buffer + * @last_amsdu: track last ASMDU SN for duplication detection + * @last_sub_index: track ASMDU sub frame index for duplication detection + * @entries: list of skbs stored + */ +struct iwl_mvm_reorder_buffer { + u16 head_sn; + u16 num_stored; + u8 buf_size; + u8 sta_id; + int queue; + u16 last_amsdu; + u8 last_sub_index; + struct sk_buff_head entries[IEEE80211_MAX_AMPDU_BUF]; +} ____cacheline_aligned_in_smp; + +/** * struct iwl_mvm_baid_data - BA session data * @sta_id: station id * @tid: tid of the session @@ -622,6 +644,7 @@ struct iwl_mvm_shared_mem_cfg { * @last_rx: last rx jiffies, updated only if timeout passed from last update * @session_timer: timer to check if BA session expired, runs at 2 * timeout * @mvm: mvm pointer, needed for timer context + * @reorder_buf: reorder buffer, allocated per queue */ struct iwl_mvm_baid_data { struct rcu_head rcu_head; @@ -632,6 +655,7 @@ struct iwl_mvm_baid_data { unsigned long last_rx; struct timer_list session_timer; struct iwl_mvm *mvm; + struct iwl_mvm_reorder_buffer reorder_buf[]; }; struct iwl_mvm { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 8d5717b..4f320dc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -395,6 +395,67 @@ int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, return ret; } +static void iwl_mvm_release_frames(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + struct napi_struct *napi, + struct iwl_mvm_reorder_buffer *reorder_buf, + u16 nssn) +{ + u16 ssn = reorder_buf->head_sn; + + while (ieee80211_sn_less(ssn, nssn)) { + int index = ssn % reorder_buf->buf_size; + struct sk_buff_head *skb_list = &reorder_buf->entries[index]; + struct sk_buff *skb; + + ssn = ieee80211_sn_inc(ssn); + + /* holes are valid since nssn indicates frames were received. */ + if (skb_queue_empty(skb_list) || !skb_peek_tail(skb_list)) + continue; + /* Empty the list. Will have more than one frame for A-MSDU */ + while ((skb = __skb_dequeue(skb_list))) { + iwl_mvm_pass_packet_to_mac80211(mvm, napi, skb, + reorder_buf->queue, + sta); + reorder_buf->num_stored--; + } + } + reorder_buf->head_sn = nssn; +} + +static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue, + struct iwl_mvm_delba_data *data) +{ + struct iwl_mvm_baid_data *ba_data; + struct ieee80211_sta *sta; + struct iwl_mvm_reorder_buffer *reorder_buf; + u8 baid = data->baid; + + if (WARN_ON_ONCE(baid >= IWL_RX_REORDER_DATA_INVALID_BAID)) + return; + + rcu_read_lock(); + + ba_data = rcu_dereference(mvm->baid_map[baid]); + if (WARN_ON_ONCE(!ba_data)) + goto out; + + sta = rcu_dereference(mvm->fw_id_to_mac_id[ba_data->sta_id]); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) + goto out; + + reorder_buf = &ba_data->reorder_buf[queue]; + + /* release all frames that are in the reorder buffer to the stack */ + iwl_mvm_release_frames(mvm, sta, NULL, reorder_buf, + ieee80211_sn_add(reorder_buf->head_sn, + reorder_buf->buf_size)); + +out: + rcu_read_unlock(); +} + void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, int queue) { @@ -418,12 +479,129 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, case IWL_MVM_RXQ_EMPTY: break; case IWL_MVM_RXQ_NOTIF_DEL_BA: + iwl_mvm_del_ba(mvm, queue, (void *)internal_notif->data); break; default: WARN_ONCE(1, "Invalid identifier %d", internal_notif->type); } } +/* + * Returns true if the MPDU was buffered\dropped, false if it should be passed + * to upper layer. + */ +static bool iwl_mvm_reorder(struct iwl_mvm *mvm, + struct napi_struct *napi, + int queue, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct iwl_rx_mpdu_desc *desc) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_baid_data *baid_data; + struct iwl_mvm_reorder_buffer *buffer; + struct sk_buff *tail; + u32 reorder = le32_to_cpu(desc->reorder_data); + bool amsdu = desc->mac_flags2 & IWL_RX_MPDU_MFLG2_AMSDU; + u8 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK; + u8 sub_frame_idx = desc->amsdu_info & + IWL_RX_MPDU_AMSDU_SUBFRAME_IDX_MASK; + int index; + u16 nssn, sn; + u8 baid; + + baid = (reorder & IWL_RX_MPDU_REORDER_BAID_MASK) >> + IWL_RX_MPDU_REORDER_BAID_SHIFT; + + if (baid == IWL_RX_REORDER_DATA_INVALID_BAID) + return false; + + /* no sta yet */ + if (WARN_ON(IS_ERR_OR_NULL(sta))) + return false; + + /* not a data packet */ + if (!ieee80211_is_data_qos(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) + return false; + + if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) + return false; + + baid_data = rcu_dereference(mvm->baid_map[baid]); + if (WARN(!baid_data, + "Received baid %d, but no data exists for this BAID\n", baid)) + return false; + if (WARN(tid != baid_data->tid || mvm_sta->sta_id != baid_data->sta_id, + "baid 0x%x is mapped to sta:%d tid:%d, but was received for sta:%d tid:%d\n", + baid, baid_data->sta_id, baid_data->tid, mvm_sta->sta_id, + tid)) + return false; + + nssn = reorder & IWL_RX_MPDU_REORDER_NSSN_MASK; + sn = (reorder & IWL_RX_MPDU_REORDER_SN_MASK) >> + IWL_RX_MPDU_REORDER_SN_SHIFT; + + buffer = &baid_data->reorder_buf[queue]; + + /* + * If there was a significant jump in the nssn - adjust. + * If the SN is smaller than the NSSN it might need to first go into + * the reorder buffer, in which case we just release up to it and the + * rest of the function will take of storing it and releasing up to the + * nssn + */ + if (!ieee80211_sn_less(nssn, buffer->head_sn + buffer->buf_size)) { + u16 min_sn = ieee80211_sn_less(sn, nssn) ? sn : nssn; + + iwl_mvm_release_frames(mvm, sta, napi, buffer, min_sn); + } + + /* drop any oudated packets */ + if (ieee80211_sn_less(sn, buffer->head_sn)) + goto drop; + + /* release immediately if allowed by nssn and no stored frames */ + if (!buffer->num_stored && ieee80211_sn_less(sn, nssn)) { + buffer->head_sn = nssn; + /* No need to update AMSDU last SN - we are moving the head */ + return false; + } + + index = sn % buffer->buf_size; + + /* + * Check if we already stored this frame + * As AMSDU is either received or not as whole, logic is simple: + * If we have frames in that position in the buffer and the last frame + * originated from AMSDU had a different SN then it is a retransmission. + * If it is the same SN then if the subframe index is incrementing it + * is the same AMSDU - otherwise it is a retransmission. + */ + tail = skb_peek_tail(&buffer->entries[index]); + if (tail && !amsdu) + goto drop; + else if (tail && (sn != buffer->last_amsdu || + buffer->last_sub_index >= sub_frame_idx)) + goto drop; + + /* put in reorder buffer */ + __skb_queue_tail(&buffer->entries[index], skb); + buffer->num_stored++; + if (amsdu) { + buffer->last_amsdu = sn; + buffer->last_sub_index = sub_frame_idx; + } + + iwl_mvm_release_frames(mvm, sta, napi, buffer, nssn); + return true; + +drop: + kfree_skb(skb); + return true; +} + static void iwl_mvm_agg_rx_received(struct iwl_mvm *mvm, u8 baid) { unsigned long now = jiffies; @@ -638,7 +816,8 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, /* TODO: PHY info - gscan */ iwl_mvm_create_skb(skb, hdr, len, crypt_len, rxb); - iwl_mvm_pass_packet_to_mac80211(mvm, napi, skb, queue, sta); + if (!iwl_mvm_reorder(mvm, napi, queue, sta, skb, desc)) + iwl_mvm_pass_packet_to_mac80211(mvm, napi, skb, queue, sta); rcu_read_unlock(); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 4fb4c4e..2b83911 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1167,14 +1167,63 @@ int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) #define IWL_MAX_RX_BA_SESSIONS 16 -static void iwl_mvm_sync_rxq_del_ba(struct iwl_mvm *mvm) +static void iwl_mvm_sync_rxq_del_ba(struct iwl_mvm *mvm, u8 baid) { - struct iwl_mvm_internal_rxq_notif data = { - .type = IWL_MVM_RXQ_EMPTY, - .sync = 1, + struct iwl_mvm_delba_notif notif = { + .metadata.type = IWL_MVM_RXQ_NOTIF_DEL_BA, + .metadata.sync = 1, + .delba.baid = baid, }; + iwl_mvm_sync_rx_queues_internal(mvm, (void *)¬if, sizeof(notif)); +}; + +static void iwl_mvm_free_reorder(struct iwl_mvm *mvm, + struct iwl_mvm_baid_data *data) +{ + int i; + + iwl_mvm_sync_rxq_del_ba(mvm, data->baid); + + for (i = 0; i < mvm->trans->num_rx_queues; i++) { + int j; + struct iwl_mvm_reorder_buffer *reorder_buf = + &data->reorder_buf[i]; - iwl_mvm_sync_rx_queues_internal(mvm, &data, sizeof(data)); + if (likely(!reorder_buf->num_stored)) + continue; + + /* + * This shouldn't happen in regular DELBA since the internal + * delBA notification should trigger a release of all frames in + * the reorder buffer. + */ + WARN_ON(1); + + for (j = 0; j < reorder_buf->buf_size; j++) + __skb_queue_purge(&reorder_buf->entries[j]); + } +} + +static void iwl_mvm_init_reorder_buffer(struct iwl_mvm *mvm, + u32 sta_id, + struct iwl_mvm_baid_data *data, + u16 ssn, u8 buf_size) +{ + int i; + + for (i = 0; i < mvm->trans->num_rx_queues; i++) { + struct iwl_mvm_reorder_buffer *reorder_buf = + &data->reorder_buf[i]; + int j; + + reorder_buf->num_stored = 0; + reorder_buf->head_sn = ssn; + reorder_buf->buf_size = buf_size; + reorder_buf->queue = i; + reorder_buf->sta_id = sta_id; + for (j = 0; j < reorder_buf->buf_size; j++) + __skb_queue_head_init(&reorder_buf->entries[j]); + } } int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, @@ -1198,7 +1247,10 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, * Allocate here so if allocation fails we can bail out early * before starting the BA session in the firmware */ - baid_data = kzalloc(sizeof(*baid_data), GFP_KERNEL); + baid_data = kzalloc(sizeof(*baid_data) + + mvm->trans->num_rx_queues * + sizeof(baid_data->reorder_buf[0]), + GFP_KERNEL); if (!baid_data) return -ENOMEM; } @@ -1273,6 +1325,8 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, mod_timer(&baid_data->session_timer, TU_TO_EXP_TIME(timeout * 2)); + iwl_mvm_init_reorder_buffer(mvm, mvm_sta->sta_id, + baid_data, ssn, buf_size); /* * protect the BA data with RCU to cover a case where our * internal RX sync mechanism will timeout (not that it's @@ -1297,9 +1351,8 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, return -EINVAL; /* synchronize all rx queues so we can safely delete */ - iwl_mvm_sync_rxq_del_ba(mvm); + iwl_mvm_free_reorder(mvm, baid_data); del_timer_sync(&baid_data->session_timer); - RCU_INIT_POINTER(mvm->baid_map[baid], NULL); kfree_rcu(baid_data, rcu_head); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 1226318..d2c58f1 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -348,6 +348,15 @@ struct iwl_mvm_key_pn { } ____cacheline_aligned_in_smp q[]; }; +struct iwl_mvm_delba_data { + u32 baid; +} __packed; + +struct iwl_mvm_delba_notif { + struct iwl_mvm_internal_rxq_notif metadata; + struct iwl_mvm_delba_data delba; +} __packed; + /** * struct iwl_mvm_rxq_dup_data - per station per rx queue data * @last_seq: last sequence per tid for duplicate packet detection -- cgit v1.1 From 0690405fef290c3ae9bf466d603731b2ba478053 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 28 Feb 2016 20:28:17 +0200 Subject: iwlwifi: mvm: add reorder timeout per frame Add a timer in order to release expired frames from the reorder buffer. This is needed since some APs do not retransmit frames to fill in the reorder holes and in TCP it results with a complete stall of traffic. This has a few side effects on the general design: The nssn may not reflect the the head of the reorder buffer. This situation is valid, and packets with SN lower than the reorder buffer head will be dropped. Another side effect is that since the reorder timer might expire we need to lock the reorder buffer. This however is fine since the locking is only inside a single reorder buffer between RX path and reorder timeout and there is no outside contention. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 12 ++++ drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 81 ++++++++++++++++++++++++++- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 23 +++++++- 3 files changed, 114 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 8272e54..3c331bd 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -623,6 +623,12 @@ struct iwl_mvm_shared_mem_cfg { * @last_amsdu: track last ASMDU SN for duplication detection * @last_sub_index: track ASMDU sub frame index for duplication detection * @entries: list of skbs stored + * @reorder_time: time the packet was stored in the reorder buffer + * @reorder_timer: timer for frames are in the reorder buffer. For AMSDU + * it is the time of last received sub-frame + * @removed: prevent timer re-arming + * @lock: protect reorder buffer internal state + * @mvm: mvm pointer, needed for frame timer context */ struct iwl_mvm_reorder_buffer { u16 head_sn; @@ -633,6 +639,11 @@ struct iwl_mvm_reorder_buffer { u16 last_amsdu; u8 last_sub_index; struct sk_buff_head entries[IEEE80211_MAX_AMPDU_BUF]; + unsigned long reorder_time[IEEE80211_MAX_AMPDU_BUF]; + struct timer_list reorder_timer; + bool removed; + spinlock_t lock; + struct iwl_mvm *mvm; } ____cacheline_aligned_in_smp; /** @@ -1682,6 +1693,7 @@ void iwl_mvm_tdls_ch_switch_work(struct work_struct *work); void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, struct iwl_mvm_internal_rxq_notif *notif, u32 size); +void iwl_mvm_reorder_timer_expired(unsigned long data); struct ieee80211_vif *iwl_mvm_get_bss_vif(struct iwl_mvm *mvm); void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 4f320dc..ed187af 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -395,6 +395,8 @@ int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, return ret; } +#define RX_REORDER_BUF_TIMEOUT_MQ (HZ / 10) + static void iwl_mvm_release_frames(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct napi_struct *napi, @@ -403,6 +405,12 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, { u16 ssn = reorder_buf->head_sn; + lockdep_assert_held(&reorder_buf->lock); + + /* ignore nssn smaller than head sn - this can happen due to timeout */ + if (ieee80211_sn_less(nssn, ssn)) + return; + while (ieee80211_sn_less(ssn, nssn)) { int index = ssn % reorder_buf->buf_size; struct sk_buff_head *skb_list = &reorder_buf->entries[index]; @@ -422,6 +430,66 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, } } reorder_buf->head_sn = nssn; + + if (reorder_buf->num_stored && !reorder_buf->removed) { + u16 index = reorder_buf->head_sn % reorder_buf->buf_size; + + while (!skb_peek_tail(&reorder_buf->entries[index])) + index = (index + 1) % reorder_buf->buf_size; + /* modify timer to match next frame's expiration time */ + mod_timer(&reorder_buf->reorder_timer, + reorder_buf->reorder_time[index] + 1 + + RX_REORDER_BUF_TIMEOUT_MQ); + } else { + del_timer(&reorder_buf->reorder_timer); + } +} + +void iwl_mvm_reorder_timer_expired(unsigned long data) +{ + struct iwl_mvm_reorder_buffer *buf = (void *)data; + int i; + u16 sn = 0, index = 0; + bool expired = false; + + spin_lock_bh(&buf->lock); + + if (!buf->num_stored || buf->removed) { + spin_unlock_bh(&buf->lock); + return; + } + + for (i = 0; i < buf->buf_size ; i++) { + index = (buf->head_sn + i) % buf->buf_size; + + if (!skb_peek_tail(&buf->entries[index])) + continue; + if (!time_after(jiffies, buf->reorder_time[index] + + RX_REORDER_BUF_TIMEOUT_MQ)) + break; + expired = true; + sn = ieee80211_sn_add(buf->head_sn, i + 1); + } + + if (expired) { + struct ieee80211_sta *sta; + + rcu_read_lock(); + sta = rcu_dereference(buf->mvm->fw_id_to_mac_id[buf->sta_id]); + /* SN is set to the last expired frame + 1 */ + iwl_mvm_release_frames(buf->mvm, sta, NULL, buf, sn); + rcu_read_unlock(); + } else if (buf->num_stored) { + /* + * If no frame expired and there are stored frames, index is now + * pointing to the first unexpired frame - modify timer + * accordingly to this frame. + */ + mod_timer(&buf->reorder_timer, + buf->reorder_time[index] + + 1 + RX_REORDER_BUF_TIMEOUT_MQ); + } + spin_unlock_bh(&buf->lock); } static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue, @@ -448,9 +516,12 @@ static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue, reorder_buf = &ba_data->reorder_buf[queue]; /* release all frames that are in the reorder buffer to the stack */ + spin_lock_bh(&reorder_buf->lock); iwl_mvm_release_frames(mvm, sta, NULL, reorder_buf, ieee80211_sn_add(reorder_buf->head_sn, reorder_buf->buf_size)); + spin_unlock_bh(&reorder_buf->lock); + del_timer_sync(&reorder_buf->reorder_timer); out: rcu_read_unlock(); @@ -545,6 +616,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, buffer = &baid_data->reorder_buf[queue]; + spin_lock_bh(&buffer->lock); + /* * If there was a significant jump in the nssn - adjust. * If the SN is smaller than the NSSN it might need to first go into @@ -564,8 +637,10 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, /* release immediately if allowed by nssn and no stored frames */ if (!buffer->num_stored && ieee80211_sn_less(sn, nssn)) { - buffer->head_sn = nssn; + if (ieee80211_sn_less(buffer->head_sn, nssn)) + buffer->head_sn = nssn; /* No need to update AMSDU last SN - we are moving the head */ + spin_unlock_bh(&buffer->lock); return false; } @@ -589,16 +664,20 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, /* put in reorder buffer */ __skb_queue_tail(&buffer->entries[index], skb); buffer->num_stored++; + buffer->reorder_time[index] = jiffies; + if (amsdu) { buffer->last_amsdu = sn; buffer->last_sub_index = sub_frame_idx; } iwl_mvm_release_frames(mvm, sta, napi, buffer, nssn); + spin_unlock_bh(&buffer->lock); return true; drop: kfree_skb(skb); + spin_unlock_bh(&buffer->lock); return true; } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 2b83911..e7f1da5 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1189,8 +1189,11 @@ static void iwl_mvm_free_reorder(struct iwl_mvm *mvm, struct iwl_mvm_reorder_buffer *reorder_buf = &data->reorder_buf[i]; - if (likely(!reorder_buf->num_stored)) + spin_lock_bh(&reorder_buf->lock); + if (likely(!reorder_buf->num_stored)) { + spin_unlock_bh(&reorder_buf->lock); continue; + } /* * This shouldn't happen in regular DELBA since the internal @@ -1201,6 +1204,17 @@ static void iwl_mvm_free_reorder(struct iwl_mvm *mvm, for (j = 0; j < reorder_buf->buf_size; j++) __skb_queue_purge(&reorder_buf->entries[j]); + /* + * Prevent timer re-arm. This prevents a very far fetched case + * where we timed out on the notification. There may be prior + * RX frames pending in the RX queue before the notification + * that might get processed between now and the actual deletion + * and we would re-arm the timer although we are deleting the + * reorder buffer. + */ + reorder_buf->removed = true; + spin_unlock_bh(&reorder_buf->lock); + del_timer_sync(&reorder_buf->reorder_timer); } } @@ -1219,6 +1233,13 @@ static void iwl_mvm_init_reorder_buffer(struct iwl_mvm *mvm, reorder_buf->num_stored = 0; reorder_buf->head_sn = ssn; reorder_buf->buf_size = buf_size; + /* rx reorder timer */ + reorder_buf->reorder_timer.function = + iwl_mvm_reorder_timer_expired; + reorder_buf->reorder_timer.data = (unsigned long)reorder_buf; + init_timer(&reorder_buf->reorder_timer); + spin_lock_init(&reorder_buf->lock); + reorder_buf->mvm = mvm; reorder_buf->queue = i; reorder_buf->sta_id = sta_id; for (j = 0; j < reorder_buf->buf_size; j++) -- cgit v1.1 From a338384bb31f01dc1306c7200ace61a55fa25947 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 28 Feb 2016 15:41:47 +0200 Subject: iwlwifi: mvm: utilize the frame release infrastructure The firmware will send frame release notification in order to release "stuck" frames on a queue where no more frames arrive on. Upon receiving the message the driver shall indicate the frames up to the NSSN. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 33 +++++++++++++++++++++++++-- 3 files changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 3c331bd..6eaf21a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1304,7 +1304,7 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi, void iwl_mvm_rx_phy_cmd_mq(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue); -void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, +void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue); int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, const u8 *data, u32 count); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 7c6a598..2ba1369 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -932,7 +932,7 @@ static void iwl_mvm_rx(struct iwl_op_mode *op_mode, if (likely(pkt->hdr.cmd == REPLY_RX_MPDU_CMD)) iwl_mvm_rx_rx_mpdu(mvm, napi, rxb); else if (pkt->hdr.cmd == FRAME_RELEASE) - iwl_mvm_rx_frame_release(mvm, rxb, 0); + iwl_mvm_rx_frame_release(mvm, napi, rxb, 0); else if (pkt->hdr.cmd == REPLY_RX_PHY_CMD) iwl_mvm_rx_rx_phy_cmd(mvm, rxb); else @@ -1634,7 +1634,7 @@ static void iwl_mvm_rx_mq_rss(struct iwl_op_mode *op_mode, struct iwl_rx_packet *pkt = rxb_addr(rxb); if (unlikely(pkt->hdr.cmd == FRAME_RELEASE)) - iwl_mvm_rx_frame_release(mvm, rxb, queue); + iwl_mvm_rx_frame_release(mvm, napi, rxb, queue); else if (unlikely(pkt->hdr.cmd == RX_QUEUES_NOTIFICATION && pkt->hdr.group_id == DATA_PATH_GROUP)) iwl_mvm_rx_queue_notif(mvm, rxb, queue); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index ed187af..0da93b5 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -900,8 +900,37 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, rcu_read_unlock(); } -void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, +void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue) { - /* TODO */ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_frame_release *release = (void *)pkt->data; + struct ieee80211_sta *sta; + struct iwl_mvm_reorder_buffer *reorder_buf; + struct iwl_mvm_baid_data *ba_data; + + int baid = release->baid; + + if (WARN_ON_ONCE(baid == IWL_RX_REORDER_DATA_INVALID_BAID)) + return; + + rcu_read_lock(); + + ba_data = rcu_dereference(mvm->baid_map[baid]); + if (WARN_ON_ONCE(!ba_data)) + goto out; + + sta = rcu_dereference(mvm->fw_id_to_mac_id[ba_data->sta_id]); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) + goto out; + + reorder_buf = &ba_data->reorder_buf[queue]; + + spin_lock_bh(&reorder_buf->lock); + iwl_mvm_release_frames(mvm, sta, napi, reorder_buf, + le16_to_cpu(release->nssn)); + spin_unlock_bh(&reorder_buf->lock); + +out: + rcu_read_unlock(); } -- cgit v1.1 From 2b1ba3ef921078ac3bd0375fdac9eea2c69ec144 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Mon, 21 Sep 2015 14:14:23 +0200 Subject: iwlwifi: mvm: support queue removal in ADD_STA hcmd To indicate to the FW that a queue has been removed, an existing flag in the ADD_STA HCMD (that hasn't been in use) has been changed to indicate that a queue is being removed from a STA. Update this in the driver code. Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h index e896648..38b1d04 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h @@ -173,7 +173,7 @@ enum iwl_sta_key_flag { /** * enum iwl_sta_modify_flag - indicate to the fw what flag are being changed - * @STA_MODIFY_KEY: this command modifies %key + * @STA_MODIFY_QUEUE_REMOVAL: this command removes a queue * @STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx * @STA_MODIFY_TX_RATE: unused * @STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid @@ -183,7 +183,7 @@ enum iwl_sta_key_flag { * @STA_MODIFY_QUEUES: modify the queues used by this station */ enum iwl_sta_modify_flag { - STA_MODIFY_KEY = BIT(0), + STA_MODIFY_QUEUE_REMOVAL = BIT(0), STA_MODIFY_TID_DISABLE_TX = BIT(1), STA_MODIFY_TX_RATE = BIT(2), STA_MODIFY_ADD_BA_TID = BIT(3), -- cgit v1.1 From c24c7f58d77a75343010d88fdf85ddebad2d7438 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 30 Mar 2016 20:59:27 +0300 Subject: iwlwifi: trans: don't call the trans-specific ref/unref directly It's cleaner to always call the iwl_trans_ref/unref() functions instead of sometimes calling the trans-specific ops directly. This also prepares for moving some of the code from the trans-specific ops to the common trans code. Signed-off-by: Luca Coelho Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/internal.h | 3 --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 10 +++++----- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h index 9ce4ec6..de6974f 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h @@ -481,9 +481,6 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, struct sk_buff_head *skbs); void iwl_trans_pcie_tx_reset(struct iwl_trans *trans); -void iwl_trans_pcie_ref(struct iwl_trans *trans); -void iwl_trans_pcie_unref(struct iwl_trans *trans); - static inline u16 iwl_pcie_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) { struct iwl_tfd_tb *tb = &tfd->tbs[idx]; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index ee081c2..37e134d 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2013,7 +2013,7 @@ static void iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, u32 reg, spin_unlock_irqrestore(&trans_pcie->reg_lock, flags); } -void iwl_trans_pcie_ref(struct iwl_trans *trans) +static void iwl_trans_pcie_ref(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); @@ -2028,7 +2028,7 @@ void iwl_trans_pcie_ref(struct iwl_trans *trans) #endif /* CONFIG_PM */ } -void iwl_trans_pcie_unref(struct iwl_trans *trans) +static void iwl_trans_pcie_unref(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index e1f7a3f..e2eb130d 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -605,7 +605,7 @@ static void iwl_pcie_clear_cmd_in_flight(struct iwl_trans *trans) if (trans_pcie->ref_cmd_in_flight) { trans_pcie->ref_cmd_in_flight = false; IWL_DEBUG_RPM(trans, "clear ref_cmd_in_flight - unref\n"); - iwl_trans_pcie_unref(trans); + iwl_trans_unref(trans); } if (!trans->cfg->base_params->apmg_wake_up_wa) @@ -650,7 +650,7 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id) if (txq_id != trans_pcie->cmd_queue) { IWL_DEBUG_RPM(trans, "Q %d - last tx freed\n", q->id); - iwl_trans_pcie_unref(trans); + iwl_trans_unref(trans); } else { iwl_pcie_clear_cmd_in_flight(trans); } @@ -1134,7 +1134,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, if (q->read_ptr == q->write_ptr) { IWL_DEBUG_RPM(trans, "Q %d - last tx reclaimed\n", q->id); - iwl_trans_pcie_unref(trans); + iwl_trans_unref(trans); } out: @@ -1153,7 +1153,7 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans, !trans_pcie->ref_cmd_in_flight) { trans_pcie->ref_cmd_in_flight = true; IWL_DEBUG_RPM(trans, "set ref_cmd_in_flight - ref\n"); - iwl_trans_pcie_ref(trans); + iwl_trans_ref(trans); } /* @@ -2362,7 +2362,7 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, txq->frozen_expiry_remainder = txq->wd_timeout; } IWL_DEBUG_RPM(trans, "Q: %d first tx - take ref\n", q->id); - iwl_trans_pcie_ref(trans); + iwl_trans_ref(trans); } /* Tell device the write index *just past* this latest filled TFD */ -- cgit v1.1 From 80938abc79a0d14d747a4b3a0c93cb0aa70f238e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Mar 2016 11:05:16 +0200 Subject: iwlwifi: mvm: advertise RSS queue usage In order for mac80211 to use per-CPU statistics for RSS RX, the driver needs to advertise that it uses RSS. Do this when using more than a single queue. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 6286063..5648e37 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -442,6 +442,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) if (iwl_mvm_has_new_rx_api(mvm)) ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER); + if (mvm->trans->num_rx_queues > 1) + ieee80211_hw_set(hw, USES_RSS); + if (mvm->trans->max_skb_frags) hw->netdev_features = NETIF_F_HIGHDMA | NETIF_F_SG; -- cgit v1.1 From e9eb5e338fb77fd6839f1efba9f2b6000a1c8166 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 3 Apr 2016 10:19:16 +0300 Subject: iwlwifi: mvm: add a flag to disable checksum Add a constant to allow disabling checksum. This will enable easier debugging in early phases. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/constants.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/constants.h b/drivers/net/wireless/intel/iwlwifi/mvm/constants.h index b96b1c6..4eeb6b7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/constants.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/constants.h @@ -109,6 +109,7 @@ #define IWL_MVM_RS_80_20_FAR_RANGE_TWEAK 1 #define IWL_MVM_TOF_IS_RESPONDER 0 #define IWL_MVM_SW_TX_CSUM_OFFLOAD 0 +#define IWL_MVM_HW_CSUM_DISABLE 0 #define IWL_MVM_COLLECT_FW_ERR_DUMP 1 #define IWL_MVM_RS_NUM_TRY_BEFORE_ANT_TOGGLE 1 #define IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE 2 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 6eaf21a..72c0467 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1127,7 +1127,8 @@ static inline bool iwl_mvm_bt_is_rrc_supported(struct iwl_mvm *mvm) static inline bool iwl_mvm_is_csum_supported(struct iwl_mvm *mvm) { return fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_CSUM_SUPPORT); + IWL_UCODE_TLV_CAPA_CSUM_SUPPORT) && + !IWL_MVM_HW_CSUM_DISABLE; } static inline bool iwl_mvm_is_mplut_supported(struct iwl_mvm *mvm) -- cgit v1.1 From aea2a5f0d84745f34eb37bc5eada9ecced40fa88 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Sun, 3 Apr 2016 18:56:15 +0300 Subject: iwlwifi: Rename 9560 to 9260 and add new PCI IDs for it Rename 9560 to 9260. Add new PCI ID for 9260 and change some entries from 5165 to 9260. Also order the 9000 series. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-9000.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/iwl-config.h | 2 +- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 21 +++++++++++---------- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c index b9aca37..86a5599 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c @@ -140,8 +140,8 @@ static const struct iwl_tt_params iwl9000_tt_params = { .vht_mu_mimo_supported = true, \ .mac_addr_from_csr = true -const struct iwl_cfg iwl9560_2ac_cfg = { - .name = "Intel(R) Dual Band Wireless AC 9560", +const struct iwl_cfg iwl9260_2ac_cfg = { + .name = "Intel(R) Dual Band Wireless AC 9260", .fw_name_pre = IWL9000_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 95558e3..2e71e88 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -439,7 +439,7 @@ extern const struct iwl_cfg iwl4165_2ac_cfg; extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; extern const struct iwl_cfg iwl8265_2ac_sdio_cfg; extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; -extern const struct iwl_cfg iwl9560_2ac_cfg; +extern const struct iwl_cfg iwl9260_2ac_cfg; extern const struct iwl_cfg iwl5165_2ac_cfg; #endif /* CONFIG_IWLMVM */ diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index de42066..8f139d0 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -493,19 +493,20 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x24FD, 0x8130, iwl8265_2ac_cfg)}, /* 9000 Series */ - {IWL_PCI_DEVICE(0x9DF0, 0x0A10, iwl9560_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x0010, iwl9560_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x2A10, iwl5165_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x2010, iwl5165_2ac_cfg)}, - {IWL_PCI_DEVICE(0x2526, 0x1420, iwl5165_2ac_cfg)}, - {IWL_PCI_DEVICE(0x2526, 0x0010, iwl5165_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x0000, iwl5165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0000, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0010, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0A10, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0010, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0410, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0610, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0310, iwl5165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0000, iwl5165_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0510, iwl5165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x2010, iwl5165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x1420, iwl5165_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0710, iwl5165_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x0210, iwl9560_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x0410, iwl9560_2ac_cfg)}, - {IWL_PCI_DEVICE(0x9DF0, 0x0610, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x2A10, iwl5165_2ac_cfg)}, #endif /* CONFIG_IWLMVM */ {0} -- cgit v1.1 From fa820d696c0ac0bb3cf1b49a817899982d774d61 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 3 Apr 2016 10:15:59 +0300 Subject: iwlwifi: mvm: allow a debug knob for Tx A-MSDU even if rate control forbids it There is a debugfs knob to configure the maximal length of the A-MSDU. If this value is not 0 (which is the default), allow Tx A-MSDU even if the rate control disallows it. While at it, add "unlikely" to the if that limits the length of the A-MSDU based on the debugfs hook. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index a8e5a67..3b64568 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -609,9 +609,11 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb, if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT)) return -EINVAL; + dbg_max_amsdu_len = ACCESS_ONCE(mvm->max_amsdu_len); + if (!sta->max_amsdu_len || !ieee80211_is_data_qos(hdr->frame_control) || - !mvmsta->tlc_amsdu) { + (!mvmsta->tlc_amsdu && !dbg_max_amsdu_len)) { num_subframes = 1; pad = 0; goto segment; @@ -642,7 +644,6 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb, } max_amsdu_len = sta->max_amsdu_len; - dbg_max_amsdu_len = ACCESS_ONCE(mvm->max_amsdu_len); /* the Tx FIFO to which this A-MSDU will be routed */ txf = iwl_mvm_ac_to_tx_fifo[tid_to_mac80211_ac[tid]]; @@ -656,7 +657,7 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb, max_amsdu_len = min_t(unsigned int, max_amsdu_len, mvm->shared_mem_cfg.txfifo_size[txf] - 256); - if (dbg_max_amsdu_len) + if (unlikely(dbg_max_amsdu_len)) max_amsdu_len = min_t(unsigned int, max_amsdu_len, dbg_max_amsdu_len); -- cgit v1.1 From 71b1230ca97e60d26b4205ac553af6331724ca60 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 11 Mar 2016 12:12:16 +0200 Subject: iwlwifi: wake from runtime suspend before sending sync commands If a host command was queued while in runtime suspend, it would go out before the D0I3_END_CMD was sent. Sometimes it works, but sometimes it fails, and it is obviously the wrong thing to do. To fix this, have the opmode take a reference before sending a SYNC command and make the pcie trans wait for the runtime state to become active before actually queueing the command. Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 1 + drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 8 +++++++- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 11 +++++++++++ 4 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 362a546..513a8540 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1309,6 +1309,7 @@ static ssize_t iwl_dbgfs_d0i3_refs_read(struct file *file, PRINT_MVM_REF(IWL_MVM_REF_PROTECT_CSA); PRINT_MVM_REF(IWL_MVM_REF_FW_DBG_COLLECT); PRINT_MVM_REF(IWL_MVM_REF_INIT_UCODE); + PRINT_MVM_REF(IWL_MVM_REF_SENDING_CMD); return simple_read_from_buffer(user_buf, count, ppos, buf, pos); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 72c0467..23d7539 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -301,6 +301,7 @@ enum iwl_mvm_ref_type { IWL_MVM_REF_PROTECT_CSA, IWL_MVM_REF_FW_DBG_COLLECT, IWL_MVM_REF_INIT_UCODE, + IWL_MVM_REF_SENDING_CMD, /* update debugfs.c when changing this */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index f0ffd62..eb41d3b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -90,11 +90,17 @@ int iwl_mvm_send_cmd(struct iwl_mvm *mvm, struct iwl_host_cmd *cmd) * the mutex, this ensures we don't try to send two * (or more) synchronous commands at a time. */ - if (!(cmd->flags & CMD_ASYNC)) + if (!(cmd->flags & CMD_ASYNC)) { lockdep_assert_held(&mvm->mutex); + if (!(cmd->flags & CMD_SEND_IN_IDLE)) + iwl_mvm_ref(mvm, IWL_MVM_REF_SENDING_CMD); + } ret = iwl_trans_send_cmd(mvm->trans, cmd); + if (!(cmd->flags & (CMD_ASYNC | CMD_SEND_IN_IDLE))) + iwl_mvm_unref(mvm, IWL_MVM_REF_SENDING_CMD); + /* * If the caller wants the SKB, then don't hide any problems, the * caller might access the response buffer which will be NULL if diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index e2eb130d..d6beac9 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -1799,6 +1800,16 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans, IWL_DEBUG_INFO(trans, "Setting HCMD_ACTIVE for command %s\n", iwl_get_cmd_string(trans, cmd->id)); + if (pm_runtime_suspended(&trans_pcie->pci_dev->dev)) { + ret = wait_event_timeout(trans_pcie->d0i3_waitq, + pm_runtime_active(&trans_pcie->pci_dev->dev), + msecs_to_jiffies(IWL_TRANS_IDLE_TIMEOUT)); + if (!ret) { + IWL_ERR(trans, "Timeout exiting D0i3 before hcmd\n"); + return -ETIMEDOUT; + } + } + cmd_idx = iwl_pcie_enqueue_hcmd(trans, cmd); if (cmd_idx < 0) { ret = cmd_idx; -- cgit v1.1 From 1afb0ae4217423f7864cba0684362de99782fa4e Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Sun, 3 Apr 2016 19:55:59 +0300 Subject: iwlwifi: allow combining different phy images with mac images Currently there is one to one function between device id to it's ucode. The new generation devices allows to combine different phy and mac images. Now we have two different ucode images with the same device id. Read RF ID to identify phy image and overwrite it if needed. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-9000.c | 29 ++++++++++++++++++++++--- drivers/net/wireless/intel/iwlwifi/iwl-config.h | 3 +++ drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 15 +++++++++++++ drivers/net/wireless/intel/iwlwifi/iwl-trans.h | 2 ++ drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 10 +++++++++ drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 ++ 6 files changed, 58 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c index 86a5599..a0eeb53 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c @@ -72,9 +72,15 @@ #define IWL9000_SMEM_OFFSET 0x400000 #define IWL9000_SMEM_LEN 0x68000 -#define IWL9000_FW_PRE "iwlwifi-9000-" +#define IWL9000_FW_PRE "iwlwifi-9000-pu-a0-lc-a0-" +#define IWL9260_FW_PRE "iwlwifi-9260-th-a0-jf-a0-" +#define IWL9260LC_FW_PRE "iwlwifi-9260-th-a0-lc-a0-" #define IWL9000_MODULE_FIRMWARE(api) \ IWL9000_FW_PRE "-" __stringify(api) ".ucode" +#define IWL9260_MODULE_FIRMWARE(api) \ + IWL9260_FW_PRE "-" __stringify(api) ".ucode" +#define IWL9260LC_MODULE_FIRMWARE(api) \ + IWL9260LC_FW_PRE "-" __stringify(api) ".ucode" #define NVM_HW_SECTION_NUM_FAMILY_9000 10 @@ -138,11 +144,26 @@ static const struct iwl_tt_params iwl9000_tt_params = { .apmg_not_supported = true, \ .mq_rx_supported = true, \ .vht_mu_mimo_supported = true, \ - .mac_addr_from_csr = true + .mac_addr_from_csr = true, \ + .rf_id = true const struct iwl_cfg iwl9260_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9260", - .fw_name_pre = IWL9000_FW_PRE, + .fw_name_pre = IWL9260_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, +}; + +/* + * TODO the struct below is for internal testing only this should be + * removed by EO 2016~ + */ +const struct iwl_cfg iwl9260lc_2ac_cfg = { + .name = "Intel(R) Dual Band Wireless AC 9260", + .fw_name_pre = IWL9260LC_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, @@ -161,3 +182,5 @@ const struct iwl_cfg iwl5165_2ac_cfg = { }; MODULE_FIRMWARE(IWL9000_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL9260_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL9260LC_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 2e71e88..6eef5dc 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -314,6 +314,7 @@ struct iwl_pwr_tx_backoff { * @smem_len: the length of SMEM * @mq_rx_supported: multi-queue rx support * @vht_mu_mimo_supported: VHT MU-MIMO support + * @rf_id: need to read rf_id to determine the firmware image * * We enable the driver to be backward compatible wrt. hardware features. * API differences in uCode shouldn't be handled here but through TLVs @@ -367,6 +368,7 @@ struct iwl_cfg { bool apmg_not_supported; bool mq_rx_supported; bool vht_mu_mimo_supported; + bool rf_id; }; /* @@ -440,6 +442,7 @@ extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; extern const struct iwl_cfg iwl8265_2ac_sdio_cfg; extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; extern const struct iwl_cfg iwl9260_2ac_cfg; +extern const struct iwl_cfg iwl9260lc_2ac_cfg; extern const struct iwl_cfg iwl5165_2ac_cfg; #endif /* CONFIG_IWLMVM */ diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h index b978f6c..b5291344 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h @@ -108,6 +108,17 @@ #define CSR_HW_REV (CSR_BASE+0x028) /* + * RF ID revision info + * Bit fields: + * 31:24: Reserved (set to 0x0) + * 23:12: Type + * 11:8: Step (A - 0x0, B - 0x1, etc) + * 7:4: Dash + * 3:0: Flavor + */ +#define CSR_HW_RF_ID (CSR_BASE+0x09c) + +/* * EEPROM and OTP (one-time-programmable) memory reads * * NOTE: Device must be awake, initialized via apm_ops.init(), @@ -333,6 +344,10 @@ enum { #define CSR_HW_REV_TYPE_7265D (0x0000210) #define CSR_HW_REV_TYPE_NONE (0x00001F0) +/* RF_ID value */ +#define CSR_HW_RF_ID_TYPE_JF (0x00105000) +#define CSR_HW_RF_ID_TYPE_LC (0x00101000) + /* EEPROM REG */ #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define CSR_EEPROM_REG_BIT_CMD (0x00000002) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h index fa4ab4b..8193d36 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h @@ -753,6 +753,7 @@ enum iwl_plat_pm_mode { * @dev - pointer to struct device * that represents the device * @max_skb_frags: maximum number of fragments an SKB can have when transmitted. * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported. + * @hw_rf_id a u32 with the device RF ID * @hw_id: a u32 with the ID of the device / sub-device. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. @@ -797,6 +798,7 @@ struct iwl_trans { struct device *dev; u32 max_skb_frags; u32 hw_rev; + u32 hw_rf_id; u32 hw_id; char hw_id_str[52]; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 8f139d0..a588b05 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -596,6 +596,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); const struct iwl_cfg *cfg_7265d __maybe_unused = NULL; + const struct iwl_cfg *cfg_9260lc __maybe_unused = NULL; struct iwl_trans *iwl_trans; struct iwl_trans_pcie *trans_pcie; int ret; @@ -623,6 +624,15 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) cfg = cfg_7265d; iwl_trans->cfg = cfg_7265d; } + + if (iwl_trans->cfg->rf_id) { + if (cfg == &iwl9260_2ac_cfg) + cfg_9260lc = &iwl9260lc_2ac_cfg; + if (cfg_9260lc && iwl_trans->hw_rf_id == CSR_HW_RF_ID_TYPE_LC) { + cfg = cfg_9260lc; + iwl_trans->cfg = cfg_9260lc; + } + } #endif pci_set_drvdata(pdev, iwl_trans); diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 37e134d..eb9bdf0 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2907,6 +2907,8 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } } + trans->hw_rf_id = iwl_read32(trans, CSR_HW_RF_ID); + iwl_pcie_set_interrupt_capa(pdev, trans); trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; snprintf(trans->hw_id_str, sizeof(trans->hw_id_str), -- cgit v1.1 From 4896d7642fd34251ba7119bcb8304d9a73e51bf8 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Sun, 3 Apr 2016 14:06:12 +0300 Subject: iwlwifi: consider VHT 160MHz while parsing NVM Devices belonging to 9000 family can support VHT 160MHz channel width, so need to consider it when configuring VHT capabilities. However, NVM file doesn't have a single bit specifying that 160MHz is supported. This patch turns on 160MHz support in VHT capabilities in case there's at least one channel supporting 160MHz. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h | 1 + drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 16 +++++++++++++--- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h index 53f39a3..1f4e502 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h @@ -98,6 +98,7 @@ struct iwl_nvm_data { s8 max_tx_pwr_half_dbm; bool lar_enabled; + bool vht160_supported; struct ieee80211_supported_band bands[NUM_NL80211_BANDS]; struct ieee80211_channel channels[]; }; diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 14743c3..b13f409 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -288,6 +288,9 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, !data->sku_cap_band_52GHz_enable) continue; + if (ch_flags & NVM_CHANNEL_160MHZ) + data->vht160_supported = true; + if (!lar_supported && !(ch_flags & NVM_CHANNEL_VALID)) { /* * Channels might become valid later if lar is @@ -331,17 +334,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, channel->flags = 0; IWL_DEBUG_EEPROM(dev, - "Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n", channel->hw_value, is_5ghz ? "5.2" : "2.4", + ch_flags, CHECK_AND_PRINT_I(VALID), CHECK_AND_PRINT_I(IBSS), CHECK_AND_PRINT_I(ACTIVE), CHECK_AND_PRINT_I(RADAR), - CHECK_AND_PRINT_I(WIDE), CHECK_AND_PRINT_I(INDOOR_ONLY), CHECK_AND_PRINT_I(GO_CONCURRENT), - ch_flags, + CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(40MHZ), + CHECK_AND_PRINT_I(80MHZ), + CHECK_AND_PRINT_I(160MHZ), channel->max_power, ((ch_flags & NVM_CHANNEL_IBSS) && !(ch_flags & NVM_CHANNEL_RADAR)) @@ -370,6 +376,10 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, max_ampdu_exponent << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; + if (data->vht160_supported) + vht_cap->cap |= + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ; + if (cfg->vht_mu_mimo_supported) vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; -- cgit v1.1 From 43ec72b75a8851b48e561c29f49586cc747bdad8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 10 Mar 2016 11:55:44 +0100 Subject: iwlwifi: mvm: pass station to mac80211 RX where known When we've already looked up the transmitter station, we can just pass it to mac80211 using the new ieee80211_rx_napi(). This saves the overhead of looking it up in mac80211 again. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 11 ++++++++--- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 2 +- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c index 263e8a8..58e7e4f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c @@ -97,6 +97,7 @@ void iwl_mvm_rx_rx_phy_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb) * Adds the rxb to a new skb and give it to mac80211 */ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, struct napi_struct *napi, struct sk_buff *skb, struct ieee80211_hdr *hdr, u16 len, @@ -131,7 +132,7 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, fraglen, rxb->truesize); } - ieee80211_rx_napi(mvm->hw, NULL, skb, napi); + ieee80211_rx_napi(mvm->hw, sta, skb, napi); } /* @@ -453,8 +454,12 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi, mvm->sched_scan_pass_all == SCHED_SCAN_PASS_ALL_ENABLED)) mvm->sched_scan_pass_all = SCHED_SCAN_PASS_ALL_FOUND; - iwl_mvm_pass_packet_to_mac80211(mvm, napi, skb, hdr, len, ampdu_status, - crypt_len, rxb); + if (unlikely(ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control))) + rx_status->boottime_ns = ktime_get_boot_ns(); + + iwl_mvm_pass_packet_to_mac80211(mvm, sta, napi, skb, hdr, len, + ampdu_status, crypt_len, rxb); } static void iwl_mvm_update_rx_statistics(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 0da93b5..5fe7a0e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -210,7 +210,7 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, if (iwl_mvm_check_pn(mvm, skb, queue, sta)) kfree_skb(skb); else - ieee80211_rx_napi(mvm->hw, NULL, skb, napi); + ieee80211_rx_napi(mvm->hw, sta, skb, napi); } static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, -- cgit v1.1 From 16e4dd8faa9e5de9dd956a18c0f19d911a97ef79 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 30 Mar 2016 15:05:56 +0300 Subject: iwlwifi: mvm: add a new mvm reference type for RX data When a data packet is received, we need to make sure that we stay awake until it can be processed and wait a while before trying to enter runtime_suspend os system_suspend again. To do so, add a new reference type for RX data and take the reference when sending the packet to mac80211. We only do this for data packets, all the other RX packets sent by the firmware (e.g. notifications) are not a reason to prevent suspend. Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 1 + drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 513a8540..406cf1c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1310,6 +1310,7 @@ static ssize_t iwl_dbgfs_d0i3_refs_read(struct file *file, PRINT_MVM_REF(IWL_MVM_REF_FW_DBG_COLLECT); PRINT_MVM_REF(IWL_MVM_REF_INIT_UCODE); PRINT_MVM_REF(IWL_MVM_REF_SENDING_CMD); + PRINT_MVM_REF(IWL_MVM_REF_RX); return simple_read_from_buffer(user_buf, count, ppos, buf, pos); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 23d7539..820f8d6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -302,6 +302,7 @@ enum iwl_mvm_ref_type { IWL_MVM_REF_FW_DBG_COLLECT, IWL_MVM_REF_INIT_UCODE, IWL_MVM_REF_SENDING_CMD, + IWL_MVM_REF_RX, /* update debugfs.c when changing this */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c index 58e7e4f..ab7f7ed 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c @@ -272,6 +272,7 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi, u32 rate_n_flags; u32 rx_pkt_status; u8 crypt_len = 0; + bool take_ref; phy_info = &mvm->last_phy_info; rx_res = (struct iwl_rx_mpdu_res_start *)pkt->data; @@ -458,8 +459,22 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi, ieee80211_is_probe_resp(hdr->frame_control))) rx_status->boottime_ns = ktime_get_boot_ns(); + /* Take a reference briefly to kick off a d0i3 entry delay so + * we can handle bursts of RX packets without toggling the + * state too often. But don't do this for beacons if we are + * going to idle because the beacon filtering changes we make + * cause the firmware to send us collateral beacons. */ + take_ref = !(test_bit(STATUS_TRANS_GOING_IDLE, &mvm->trans->status) && + ieee80211_is_beacon(hdr->frame_control)); + + if (take_ref) + iwl_mvm_ref(mvm, IWL_MVM_REF_RX); + iwl_mvm_pass_packet_to_mac80211(mvm, sta, napi, skb, hdr, len, ampdu_status, crypt_len, rxb); + + if (take_ref) + iwl_mvm_unref(mvm, IWL_MVM_REF_RX); } static void iwl_mvm_update_rx_statistics(struct iwl_mvm *mvm, -- cgit v1.1 From e87e2639f9ca9bc273e5d67d84cf6880d42d92af Mon Sep 17 00:00:00 2001 From: Golan Ben-Ami Date: Wed, 6 Apr 2016 11:59:50 +0300 Subject: iwlwifi: mvm: add more registers to dump upon error Add UREG, RXFC, RFH, WMAL and RL2P registers to the prph dump upon error. These regesiters could help to debug MSI-X and other issues. These register should be dumped only when multi-queue rx is supported so separate the prph ranges static array to two different arrays, and enable dumping different prph ranges according to run-time decision. Signed-off-by: Golan Ben-Ami Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 53 ++++++++++++++++++++----- 1 file changed, 44 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index e25171f..442e13e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -339,9 +339,11 @@ void iwl_mvm_free_fw_dump_desc(struct iwl_mvm *mvm) #define IWL8260_ICCM_OFFSET 0x44000 /* Only for B-step */ #define IWL8260_ICCM_LEN 0xC000 /* Only for B-step */ -static const struct { +struct iwl_prph_range { u32 start, end; -} iwl_prph_dump_addr[] = { +}; + +static const struct iwl_prph_range iwl_prph_dump_addr_comm[] = { { .start = 0x00a00000, .end = 0x00a00000 }, { .start = 0x00a0000c, .end = 0x00a00024 }, { .start = 0x00a0002c, .end = 0x00a0003c }, @@ -439,8 +441,18 @@ static const struct { { .start = 0x00a44000, .end = 0x00a7bf80 }, }; +static const struct iwl_prph_range iwl_prph_dump_addr_9000[] = { + { .start = 0x00a05c00, .end = 0x00a05c18 }, + { .start = 0x00a05400, .end = 0x00a056e8 }, + { .start = 0x00a08000, .end = 0x00a098bc }, + { .start = 0x00adfc00, .end = 0x00adfd1c }, + { .start = 0x00a02400, .end = 0x00a02758 }, +}; + static u32 iwl_dump_prph(struct iwl_trans *trans, - struct iwl_fw_error_dump_data **data) + struct iwl_fw_error_dump_data **data, + const struct iwl_prph_range *iwl_prph_dump_addr, + u32 range_len) { struct iwl_fw_error_dump_prph *prph; unsigned long flags; @@ -449,7 +461,7 @@ static u32 iwl_dump_prph(struct iwl_trans *trans, if (!iwl_trans_grab_nic_access(trans, &flags)) return 0; - for (i = 0; i < ARRAY_SIZE(iwl_prph_dump_addr); i++) { + for (i = 0; i < range_len; i++) { /* The range includes both boundaries */ int num_bytes_in_chunk = iwl_prph_dump_addr[i].end - iwl_prph_dump_addr[i].start + 4; @@ -572,16 +584,31 @@ void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm) } /* Make room for PRPH registers */ - for (i = 0; i < ARRAY_SIZE(iwl_prph_dump_addr); i++) { + for (i = 0; i < ARRAY_SIZE(iwl_prph_dump_addr_comm); i++) { /* The range includes both boundaries */ - int num_bytes_in_chunk = iwl_prph_dump_addr[i].end - - iwl_prph_dump_addr[i].start + 4; + int num_bytes_in_chunk = + iwl_prph_dump_addr_comm[i].end - + iwl_prph_dump_addr_comm[i].start + 4; prph_len += sizeof(*dump_data) + sizeof(struct iwl_fw_error_dump_prph) + num_bytes_in_chunk; } + if (mvm->cfg->mq_rx_supported) { + for (i = 0; i < + ARRAY_SIZE(iwl_prph_dump_addr_9000); i++) { + /* The range includes both boundaries */ + int num_bytes_in_chunk = + iwl_prph_dump_addr_9000[i].end - + iwl_prph_dump_addr_9000[i].start + 4; + + prph_len += sizeof(*dump_data) + + sizeof(struct iwl_fw_error_dump_prph) + + num_bytes_in_chunk; + } + } + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) radio_len = sizeof(*dump_data) + RADIO_REG_MAX_READ; } @@ -769,8 +796,16 @@ void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm) } } - if (prph_len) - iwl_dump_prph(mvm->trans, &dump_data); + if (prph_len) { + iwl_dump_prph(mvm->trans, &dump_data, + iwl_prph_dump_addr_comm, + ARRAY_SIZE(iwl_prph_dump_addr_comm)); + + if (mvm->cfg->mq_rx_supported) + iwl_dump_prph(mvm->trans, &dump_data, + iwl_prph_dump_addr_9000, + ARRAY_SIZE(iwl_prph_dump_addr_9000)); + } dump_trans_data: fw_error_dump->trans_ptr = iwl_trans_dump_data(mvm->trans, -- cgit v1.1 From 16c45822a89f3b53b300784d08e9665681a43a20 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 4 Apr 2016 19:30:05 +0300 Subject: iwlwifi: mvm: don't allow negative reference count Currently code allows mvm reference to become negative and only warns in case mvm reference is released while reference counting is 0. However, we better prevent this from happening at all since iwl_mvm_unref() may race against iwl_mvm_unref_all_except() which is called on restart. As a result we might get the same reference unreferenced twice ending with a negative value: An example for an easily reproduced log: [ 2689.909166] iwl_mvm_ref Take mvm reference - type 8 [ 2690.732716] iwl_mvm_unref_all_except Cleanup: remove mvm ref type 8 (1) [ 2690.849708] iwl_mvm_unref Leave mvm reference - type 8 [ 2690.849721] WARNING: ... iwl_mvm_unref+0xb0/0xc0 [iwlmvm]() If there will be yet another another restart iwl_mvm_unref_all_except will run from 0 up to ref count, and since it is unsigned, we will throw the transport ref count completely out of balance: iwl_mvm_unref_all_except[I] -- Cleanup: remove mvm ref type 8 (255) iwl_trans_slv_unref[I] -- rpm counter: 0 iwl_trans_slv_unref[I] -- rpm counter: -1 iwl_trans_slv_unref[I] -- rpm counter: -2 ... iwl_trans_slv_unref[I] -- rpm counter: -253 iwl_trans_slv_unref[I] -- rpm counter: -254 As there is no valid scenario where we can get to a negative reference count - prevent it from happening. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 5648e37..cd71017 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -229,7 +229,11 @@ void iwl_mvm_unref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type) IWL_DEBUG_RPM(mvm, "Leave mvm reference - type %d\n", ref_type); spin_lock_bh(&mvm->refs_lock); - WARN_ON(!mvm->refs[ref_type]--); + if (WARN_ON(!mvm->refs[ref_type])) { + spin_unlock_bh(&mvm->refs_lock); + return; + } + mvm->refs[ref_type]--; spin_unlock_bh(&mvm->refs_lock); iwl_trans_unref(mvm->trans); } -- cgit v1.1 From 0730ffb19e9af9b021927c266b6fbff0b5d93d45 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Wed, 6 Apr 2016 10:45:05 +0300 Subject: iwlwifi: Fix firmware name maximum length definition Previous patch had changed firmware name convention for new generation product. The firmware name is now longer than the former convention. Adapt max firmware name length to the new convention. Fixes: e1ba684f762b ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index c9f0e0b..82434c5 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -117,7 +117,7 @@ struct iwl_drv { const struct iwl_cfg *cfg; int fw_index; /* firmware we're trying to load */ - char firmware_name[32]; /* name of firmware file to load */ + char firmware_name[64]; /* name of firmware file to load */ struct completion request_firmware_complete; -- cgit v1.1 From 7ef3dd264edbe8fdec163bf19dc9b3458e878cf4 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Sun, 3 Apr 2016 20:15:26 +0300 Subject: iwlwifi: pcie: don't wake up the NIC when writing CSRs in MSIX mode CSR registers are always available even when the NIC is not awake, no need to wake up the NIC before accessing them. This has a huge impact when we re-enable an interrupt at the end of the ISR since waking up the NIC can take some time. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index 7f8a232..89f87f7 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -1298,7 +1298,7 @@ static inline void iwl_pcie_clear_irq(struct iwl_trans *trans, * write 1 clear (W1C) register, meaning that it's being clear * by writing 1 to the bit. */ - iwl_write_direct32(trans, CSR_MSIX_AUTOMASK_ST_AD, BIT(entry->entry)); + iwl_write32(trans, CSR_MSIX_AUTOMASK_ST_AD, BIT(entry->entry)); } /* @@ -1817,13 +1817,13 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id) lock_map_acquire(&trans->sync_cmd_lockdep_map); spin_lock(&trans_pcie->irq_lock); - inta_fh = iwl_read_direct32(trans, CSR_MSIX_FH_INT_CAUSES_AD); - inta_hw = iwl_read_direct32(trans, CSR_MSIX_HW_INT_CAUSES_AD); + inta_fh = iwl_read32(trans, CSR_MSIX_FH_INT_CAUSES_AD); + inta_hw = iwl_read32(trans, CSR_MSIX_HW_INT_CAUSES_AD); /* * Clear causes registers to avoid being handling the same cause. */ - iwl_write_direct32(trans, CSR_MSIX_FH_INT_CAUSES_AD, inta_fh); - iwl_write_direct32(trans, CSR_MSIX_HW_INT_CAUSES_AD, inta_hw); + iwl_write32(trans, CSR_MSIX_FH_INT_CAUSES_AD, inta_fh); + iwl_write32(trans, CSR_MSIX_HW_INT_CAUSES_AD, inta_hw); spin_unlock(&trans_pcie->irq_lock); if (unlikely(!(inta_fh | inta_hw))) { -- cgit v1.1 From 74dd17648c849eb401b8f4401e72628d9e7c7bd0 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Wed, 30 Mar 2016 20:04:48 +0300 Subject: iwlwifi: mvm: loosen nssn comparison to reorder buffer head Up till now, the reorder buffer uses standard spec based comparison when comparing the buffer status to NSSN. This indeed works for the regular case, since we shouldn't cross the 2048 boundary without getting a frame release notification. However, this is problematic due to packet filtering that may be performed by the FW while we are in d0i3. Theoretically we may filter over 2048 packets, and then the check of the NSSN will get incorrect. Change the comparison to always trust nssn unless it is 64 or less frames behind the head - which might happen due to a timeout. This new comparison is to be used only when comparing reorder buffer head with nssn, and not when comparing the packet SN to nssn or reorder buffer head. Put this in a separate commit as the logic is a bit tricky and stands for its own commit message. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 5fe7a0e..ac2c571 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -395,6 +395,18 @@ int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, return ret; } +/* + * Returns true if sn2 - buffer_size < sn1 < sn2. + * To be used only in order to compare reorder buffer head with NSSN. + * We fully trust NSSN unless it is behind us due to reorder timeout. + * Reorder timeout can only bring us up to buffer_size SNs ahead of NSSN. + */ +static bool iwl_mvm_is_sn_less(u16 sn1, u16 sn2, u16 buffer_size) +{ + return ieee80211_sn_less(sn1, sn2) && + !ieee80211_sn_less(sn1, sn2 - buffer_size); +} + #define RX_REORDER_BUF_TIMEOUT_MQ (HZ / 10) static void iwl_mvm_release_frames(struct iwl_mvm *mvm, @@ -408,10 +420,10 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, lockdep_assert_held(&reorder_buf->lock); /* ignore nssn smaller than head sn - this can happen due to timeout */ - if (ieee80211_sn_less(nssn, ssn)) + if (iwl_mvm_is_sn_less(nssn, ssn, reorder_buf->buf_size)) return; - while (ieee80211_sn_less(ssn, nssn)) { + while (iwl_mvm_is_sn_less(ssn, nssn, reorder_buf->buf_size)) { int index = ssn % reorder_buf->buf_size; struct sk_buff_head *skb_list = &reorder_buf->entries[index]; struct sk_buff *skb; @@ -625,7 +637,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, * rest of the function will take of storing it and releasing up to the * nssn */ - if (!ieee80211_sn_less(nssn, buffer->head_sn + buffer->buf_size)) { + if (!iwl_mvm_is_sn_less(nssn, buffer->head_sn + buffer->buf_size, + buffer->buf_size)) { u16 min_sn = ieee80211_sn_less(sn, nssn) ? sn : nssn; iwl_mvm_release_frames(mvm, sta, napi, buffer, min_sn); @@ -637,7 +650,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, /* release immediately if allowed by nssn and no stored frames */ if (!buffer->num_stored && ieee80211_sn_less(sn, nssn)) { - if (ieee80211_sn_less(buffer->head_sn, nssn)) + if (iwl_mvm_is_sn_less(buffer->head_sn, nssn, + buffer->buf_size)) buffer->head_sn = nssn; /* No need to update AMSDU last SN - we are moving the head */ spin_unlock_bh(&buffer->lock); -- cgit v1.1 From dd02fbeb8fedecd8b2d55fdfde664eaa05afac6f Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Thu, 7 Apr 2016 17:26:53 +0300 Subject: iwlwifi: mvm: set correct vht capability Our device supports only 160 GHz and not 80+80. Fix VHT flag accordingly. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index b13f409..e99624d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -378,7 +378,7 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, if (data->vht160_supported) vht_cap->cap |= - IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ; + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; if (cfg->vht_mu_mimo_supported) vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; -- cgit v1.1 From 0ec84d1d1e6db6e0b4c1eb9bd9cdd2da64451da6 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 10 Apr 2016 12:27:25 +0300 Subject: iwlwifi: mvm: make phy_db size dynamic Driver is agnostic to the number of the phy_db entries and only serves the firmware as a pipe to move the data from init image to RT image. As the size of the arrays may change (as it does in 9000 device) allocate it dynamically. Firmware sends the largest index first so we can use this to know how much we should allocate. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c | 62 +++++++++++++++++++------ 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c index 4a4dea0..ecfa491 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c @@ -6,6 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -72,8 +73,6 @@ #include "iwl-trans.h" #define CHANNEL_NUM_SIZE 4 /* num of channels in calib_ch size */ -#define IWL_NUM_PAPD_CH_GROUPS 9 -#define IWL_NUM_TXP_CH_GROUPS 9 struct iwl_phy_db_entry { u16 size; @@ -86,14 +85,18 @@ struct iwl_phy_db_entry { * @cfg: phy configuration. * @calib_nch: non channel specific calibration data. * @calib_ch: channel specific calibration data. + * @n_group_papd: number of entries in papd channel group. * @calib_ch_group_papd: calibration data related to papd channel group. + * @n_group_txp: number of entries in tx power channel group. * @calib_ch_group_txp: calibration data related to tx power chanel group. */ struct iwl_phy_db { struct iwl_phy_db_entry cfg; struct iwl_phy_db_entry calib_nch; - struct iwl_phy_db_entry calib_ch_group_papd[IWL_NUM_PAPD_CH_GROUPS]; - struct iwl_phy_db_entry calib_ch_group_txp[IWL_NUM_TXP_CH_GROUPS]; + int n_group_papd; + struct iwl_phy_db_entry *calib_ch_group_papd; + int n_group_txp; + struct iwl_phy_db_entry *calib_ch_group_txp; struct iwl_trans *trans; }; @@ -143,6 +146,9 @@ struct iwl_phy_db *iwl_phy_db_init(struct iwl_trans *trans) phy_db->trans = trans; + phy_db->n_group_txp = -1; + phy_db->n_group_papd = -1; + /* TODO: add default values of the phy db. */ return phy_db; } @@ -166,11 +172,11 @@ iwl_phy_db_get_section(struct iwl_phy_db *phy_db, case IWL_PHY_DB_CALIB_NCH: return &phy_db->calib_nch; case IWL_PHY_DB_CALIB_CHG_PAPD: - if (chg_id >= IWL_NUM_PAPD_CH_GROUPS) + if (chg_id >= phy_db->n_group_papd) return NULL; return &phy_db->calib_ch_group_papd[chg_id]; case IWL_PHY_DB_CALIB_CHG_TXP: - if (chg_id >= IWL_NUM_TXP_CH_GROUPS) + if (chg_id >= phy_db->n_group_txp) return NULL; return &phy_db->calib_ch_group_txp[chg_id]; default: @@ -202,10 +208,14 @@ void iwl_phy_db_free(struct iwl_phy_db *phy_db) iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CFG, 0); iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_NCH, 0); - for (i = 0; i < IWL_NUM_PAPD_CH_GROUPS; i++) + + for (i = 0; i < phy_db->n_group_papd; i++) iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CHG_PAPD, i); - for (i = 0; i < IWL_NUM_TXP_CH_GROUPS; i++) + kfree(phy_db->calib_ch_group_papd); + + for (i = 0; i < phy_db->n_group_txp; i++) iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CHG_TXP, i); + kfree(phy_db->calib_ch_group_txp); kfree(phy_db); } @@ -224,9 +234,35 @@ int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, if (!phy_db) return -EINVAL; - if (type == IWL_PHY_DB_CALIB_CHG_PAPD || - type == IWL_PHY_DB_CALIB_CHG_TXP) + if (type == IWL_PHY_DB_CALIB_CHG_PAPD) { chg_id = le16_to_cpup((__le16 *)phy_db_notif->data); + if (phy_db && !phy_db->calib_ch_group_papd) { + /* + * Firmware sends the largest index first, so we can use + * it to know how much we should allocate. + */ + phy_db->calib_ch_group_papd = kcalloc(chg_id + 1, + sizeof(struct iwl_phy_db_entry), + GFP_ATOMIC); + if (!phy_db->calib_ch_group_papd) + return -ENOMEM; + phy_db->n_group_papd = chg_id + 1; + } + } else if (type == IWL_PHY_DB_CALIB_CHG_TXP) { + chg_id = le16_to_cpup((__le16 *)phy_db_notif->data); + if (phy_db && !phy_db->calib_ch_group_txp) { + /* + * Firmware sends the largest index first, so we can use + * it to know how much we should allocate. + */ + phy_db->calib_ch_group_txp = kcalloc(chg_id + 1, + sizeof(struct iwl_phy_db_entry), + GFP_ATOMIC); + if (!phy_db->calib_ch_group_txp) + return -ENOMEM; + phy_db->n_group_txp = chg_id + 1; + } + } entry = iwl_phy_db_get_section(phy_db, type, chg_id); if (!entry) @@ -296,7 +332,7 @@ static u16 channel_id_to_txp(struct iwl_phy_db *phy_db, u16 ch_id) if (ch_index == 0xff) return 0xff; - for (i = 0; i < IWL_NUM_TXP_CH_GROUPS; i++) { + for (i = 0; i < phy_db->n_group_txp; i++) { txp_chg = (void *)phy_db->calib_ch_group_txp[i].data; if (!txp_chg) return 0xff; @@ -447,7 +483,7 @@ int iwl_send_phy_db_data(struct iwl_phy_db *phy_db) /* Send all the TXP channel specific data */ err = iwl_phy_db_send_all_channel_groups(phy_db, IWL_PHY_DB_CALIB_CHG_PAPD, - IWL_NUM_PAPD_CH_GROUPS); + phy_db->n_group_papd); if (err) { IWL_ERR(phy_db->trans, "Cannot send channel specific PAPD groups\n"); @@ -457,7 +493,7 @@ int iwl_send_phy_db_data(struct iwl_phy_db *phy_db) /* Send all the TXP channel specific data */ err = iwl_phy_db_send_all_channel_groups(phy_db, IWL_PHY_DB_CALIB_CHG_TXP, - IWL_NUM_TXP_CH_GROUPS); + phy_db->n_group_txp); if (err) { IWL_ERR(phy_db->trans, "Cannot send channel specific TX power groups\n"); -- cgit v1.1 From ce1f27787d493bc28d2f523a3b4c9f72aa9cee7d Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 10 Apr 2016 16:02:12 +0300 Subject: iwlwifi: mvm: remove redundant alloc_ctx parameter iwl_phy_db_set_section() is get called only from atomic context, the alloc_ctx parameter is not needed. Remove it. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c | 6 +++--- drivers/net/wireless/intel/iwlwifi/iwl-phy-db.h | 4 ++-- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c index ecfa491..7beba9a 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c @@ -221,8 +221,8 @@ void iwl_phy_db_free(struct iwl_phy_db *phy_db) } IWL_EXPORT_SYMBOL(iwl_phy_db_free); -int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, - gfp_t alloc_ctx) +int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, + struct iwl_rx_packet *pkt) { struct iwl_calib_res_notif_phy_db *phy_db_notif = (struct iwl_calib_res_notif_phy_db *)pkt->data; @@ -269,7 +269,7 @@ int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, return -EINVAL; kfree(entry->data); - entry->data = kmemdup(phy_db_notif->data, size, alloc_ctx); + entry->data = kmemdup(phy_db_notif->data, size, GFP_ATOMIC); if (!entry->data) { entry->size = 0; return -ENOMEM; diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.h b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.h index 2410387..d34de3f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.h @@ -73,8 +73,8 @@ struct iwl_phy_db *iwl_phy_db_init(struct iwl_trans *trans); void iwl_phy_db_free(struct iwl_phy_db *phy_db); -int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, - gfp_t alloc_ctx); +int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, + struct iwl_rx_packet *pkt); int iwl_send_phy_db_data(struct iwl_phy_db *phy_db); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index b70f453..7057f35 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -535,7 +535,7 @@ static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait, return true; } - WARN_ON(iwl_phy_db_set_section(phy_db, pkt, GFP_ATOMIC)); + WARN_ON(iwl_phy_db_set_section(phy_db, pkt)); return false; } -- cgit v1.1 From 13303c0fb1481e40377d072a29570e005e7bd032 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 10 Apr 2016 15:51:54 +0300 Subject: iwlwifi: mvm: use helpers to get iwl_mvm_sta Getting the mvm station out of station id requires dereferencing the station id to get ieee80211_sta, then checking for pointer validity and only then extract mvm station out. Given that there are helpers to do it - use them instead of duplicating the code whenever we need only mvm station. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 8 ++------ drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c | 9 +++------ drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 6 ++---- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 7 +------ drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 8 +++----- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 7 +++---- 6 files changed, 14 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index e3561bb..4fdc3da 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1804,7 +1804,6 @@ static bool iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, struct iwl_wowlan_status *fw_status; int i; bool keep; - struct ieee80211_sta *ap_sta; struct iwl_mvm_sta *mvm_ap_sta; fw_status = iwl_mvm_get_wakeup_status(mvm, vif); @@ -1823,13 +1822,10 @@ static bool iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, status.wake_packet = fw_status->wake_packet; /* still at hard-coded place 0 for D3 image */ - ap_sta = rcu_dereference_protected( - mvm->fw_id_to_mac_id[0], - lockdep_is_held(&mvm->mutex)); - if (IS_ERR_OR_NULL(ap_sta)) + mvm_ap_sta = iwl_mvm_sta_from_staid_protected(mvm, 0); + if (!mvm_ap_sta) goto out_free; - mvm_ap_sta = iwl_mvm_sta_from_mac80211(ap_sta); for (i = 0; i < IWL_MAX_TID_COUNT; i++) { u16 seq = status.qos_seq_ctr[i]; /* firmware stores last-used value, we store next value */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c index fb96bc0..b232717 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c @@ -281,13 +281,10 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file, if (vif->type == NL80211_IFTYPE_STATION && ap_sta_id != IWL_MVM_STATION_COUNT) { - struct ieee80211_sta *sta; - - sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[ap_sta_id], - lockdep_is_held(&mvm->mutex)); - if (!IS_ERR_OR_NULL(sta)) { - struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_sta *mvm_sta; + mvm_sta = iwl_mvm_sta_from_staid_protected(mvm, ap_sta_id); + if (mvm_sta) { pos += scnprintf(buf+pos, bufsz-pos, "ap_sta_id %d - reduced Tx power %d\n", ap_sta_id, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 2ba1369..6f91c5b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -1210,7 +1210,6 @@ static bool iwl_mvm_disallow_offloading(struct iwl_mvm *mvm, struct iwl_d0i3_iter_data *iter_data) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - struct ieee80211_sta *ap_sta; struct iwl_mvm_sta *mvmsta; u32 available_tids = 0; u8 tid; @@ -1219,11 +1218,10 @@ static bool iwl_mvm_disallow_offloading(struct iwl_mvm *mvm, mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT)) return false; - ap_sta = rcu_dereference(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id]); - if (IS_ERR_OR_NULL(ap_sta)) + mvmsta = iwl_mvm_sta_from_staid_rcu(mvm, mvmvif->ap_sta_id); + if (!mvmsta) return false; - mvmsta = iwl_mvm_sta_from_mac80211(ap_sta); spin_lock_bh(&mvmsta->lock); for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) { struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index e7f1da5..855684a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1756,17 +1756,12 @@ static struct iwl_mvm_sta *iwl_mvm_get_key_sta(struct iwl_mvm *mvm, mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { u8 sta_id = mvmvif->ap_sta_id; - sta = rcu_dereference_check(mvm->fw_id_to_mac_id[sta_id], - lockdep_is_held(&mvm->mutex)); /* * It is possible that the 'sta' parameter is NULL, * for example when a GTK is removed - the sta_id will then * be the AP ID, and no station was passed by mac80211. */ - if (IS_ERR_OR_NULL(sta)) - return NULL; - - return iwl_mvm_sta_from_mac80211(sta); + return iwl_mvm_sta_from_staid_protected(mvm, sta_id); } return NULL; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index eb3f460..58fc7b3 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -359,16 +359,14 @@ static void iwl_mvm_tt_smps_iterator(void *_data, u8 *mac, static void iwl_mvm_tt_tx_protection(struct iwl_mvm *mvm, bool enable) { - struct ieee80211_sta *sta; struct iwl_mvm_sta *mvmsta; int i, err; for (i = 0; i < IWL_MVM_STATION_COUNT; i++) { - sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i], - lockdep_is_held(&mvm->mutex)); - if (IS_ERR_OR_NULL(sta)) + mvmsta = iwl_mvm_sta_from_staid_protected(mvm, i); + if (!mvmsta) continue; - mvmsta = iwl_mvm_sta_from_mac80211(sta); + if (enable == mvmsta->tt_tx_protection) continue; err = iwl_mvm_tx_protection(mvm, mvmsta, enable); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 3b64568..ff615b9 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1464,7 +1464,7 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, int sta_id = IWL_MVM_TX_RES_GET_RA(tx_resp->ra_tid); int tid = IWL_MVM_TX_RES_GET_TID(tx_resp->ra_tid); u16 sequence = le16_to_cpu(pkt->hdr.sequence); - struct ieee80211_sta *sta; + struct iwl_mvm_sta *mvmsta; if (WARN_ON_ONCE(SEQ_TO_QUEUE(sequence) < mvm->first_agg_queue)) return; @@ -1476,10 +1476,9 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, rcu_read_lock(); - sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + mvmsta = iwl_mvm_sta_from_staid_rcu(mvm, sta_id); - if (!WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + if (!WARN_ON_ONCE(!mvmsta)) { mvmsta->tid_data[tid].rate_n_flags = le32_to_cpu(tx_resp->initial_rate); mvmsta->tid_data[tid].tx_time = -- cgit v1.1 From 75094dc8487935a0d95b78b7d21804805fc3a3be Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Apr 2016 08:48:46 +0300 Subject: iwlwifi: remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE This Kconfig option allows to load a firmware for debugging with a different name. This mechanism has not been used for a few years now and replacing the firmware file works as well. Kill this Kconfig option and all the code that goes with it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/Kconfig | 6 ----- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 35 +++++++--------------------- 2 files changed, 9 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index 492035f..b64db47 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -134,12 +134,6 @@ config IWLWIFI_DEBUGFS is a low-impact option that allows getting insight into the driver's state at runtime. -config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - bool "Experimental uCode support" - depends on IWLWIFI_DEBUG - ---help--- - Enable use of experimental ucode for testing and debugging. - config IWLWIFI_DEVICE_TRACING bool "iwlwifi device access tracing" depends on EVENT_TRACING diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 82434c5..b338230 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -211,20 +211,12 @@ static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc, static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context); -#define UCODE_EXPERIMENTAL_INDEX 100 -#define UCODE_EXPERIMENTAL_TAG "exp" - static int iwl_request_firmware(struct iwl_drv *drv, bool first) { const char *name_pre = drv->cfg->fw_name_pre; char tag[8]; if (first) { -#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - drv->fw_index = UCODE_EXPERIMENTAL_INDEX; - strcpy(tag, UCODE_EXPERIMENTAL_TAG); - } else if (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) { -#endif drv->fw_index = drv->cfg->ucode_api_max; sprintf(tag, "%d", drv->fw_index); } else { @@ -240,9 +232,7 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first) snprintf(drv->firmware_name, sizeof(drv->firmware_name), "%s%s.ucode", name_pre, tag); - IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? "EXPERIMENTAL " : "", + IWL_DEBUG_INFO(drv, "attempting to load firmware '%s'\n", drv->firmware_name); return request_firmware_nowait(THIS_MODULE, 1, drv->firmware_name, @@ -541,9 +531,7 @@ static int iwl_parse_v1_v2_firmware(struct iwl_drv *drv, } if (build) - sprintf(buildstr, " build %u%s", build, - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); + sprintf(buildstr, " build %u", build); else buildstr[0] = '\0'; @@ -627,9 +615,7 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv, build = le32_to_cpu(ucode->build); if (build) - sprintf(buildstr, " build %u%s", build, - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); + sprintf(buildstr, " build %u", build); else buildstr[0] = '\0'; @@ -1274,15 +1260,12 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) * firmware filename ... but we don't check for that and only rely * on the API version read from firmware header from here on forward */ - /* no api version check required for experimental uCode */ - if (drv->fw_index != UCODE_EXPERIMENTAL_INDEX) { - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(drv, - "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - goto try_again; - } + if (api_ver < api_min || api_ver > api_max) { + IWL_ERR(drv, + "Driver unable to support your firmware API. " + "Driver supports v%u, firmware is v%u.\n", + api_max, api_ver); + goto try_again; } /* -- cgit v1.1 From 39654cb3a6a2a04bb055e62e8ece16d611c2e517 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 12 Apr 2016 13:07:52 +0300 Subject: iwlwifi: don't access a nonexistent register upon assert The commit below added code to dump the content of FIFOs that are present only on dual CPU products (8000 and up). This broke 7265D whose firmware does advertise IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG but doesn't have 2 CPUs. The current code does check the length of the FIFO before dumping them (and the nonexistent FIFO has a 0 length), but we still accessed a register to set the FIFO number and that made the DMA unhappy. The impact was a much longer recovery upon firmware assert. Fixes: 5b086414293f ("iwlwifi: mvm: support dumping UMAC internal txfifos") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index 442e13e..1ece19d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -271,9 +271,6 @@ static void iwl_mvm_dump_fifos(struct iwl_mvm *mvm, for (i = 0; i < ARRAY_SIZE(mvm->shared_mem_cfg.internal_txfifo_size); i++) { - /* Mark the number of TXF we're pulling now */ - iwl_trans_write_prph(mvm->trans, TXF_CPU2_NUM, i); - fifo_hdr = (void *)(*dump_data)->data; fifo_data = (void *)fifo_hdr->data; fifo_len = mvm->shared_mem_cfg.internal_txfifo_size[i]; @@ -289,6 +286,10 @@ static void iwl_mvm_dump_fifos(struct iwl_mvm *mvm, cpu_to_le32(fifo_len + sizeof(*fifo_hdr)); fifo_hdr->fifo_num = cpu_to_le32(i); + + /* Mark the number of TXF we're pulling now */ + iwl_trans_write_prph(mvm->trans, TXF_CPU2_NUM, i); + fifo_hdr->available_bytes = cpu_to_le32(iwl_trans_read_prph(mvm->trans, TXF_CPU2_FIFO_ITEM_CNT)); -- cgit v1.1 From 77d76931343aae1d36bf5d39231db2464abd5aa0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Apr 2016 12:36:01 +0200 Subject: iwlwifi: make configuration structs smaller Since we have a lot of configuration structs (almost 70) saving some memory in each one of them leads to an overall saving of ~2.6KiB of memory. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-1000.c | 2 +- drivers/net/wireless/intel/iwlwifi/iwl-2000.c | 2 - drivers/net/wireless/intel/iwlwifi/iwl-5000.c | 2 +- drivers/net/wireless/intel/iwlwifi/iwl-6000.c | 3 - drivers/net/wireless/intel/iwlwifi/iwl-7000.c | 1 - drivers/net/wireless/intel/iwlwifi/iwl-8000.c | 1 - drivers/net/wireless/intel/iwlwifi/iwl-9000.c | 1 - drivers/net/wireless/intel/iwlwifi/iwl-config.h | 118 ++++++++++++------------ drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 5 +- 9 files changed, 65 insertions(+), 70 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-1000.c b/drivers/net/wireless/intel/iwlwifi/iwl-1000.c index 5c2aae6..b2573b1 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-1000.c @@ -52,7 +52,7 @@ static const struct iwl_base_params iwl1000_base_params = { .num_of_queues = IWLAGN_NUM_QUEUES, .eeprom_size = OTP_LOW_IMAGE_SIZE, - .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .pll_cfg = true, .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .led_compensation = 51, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-2000.c b/drivers/net/wireless/intel/iwlwifi/iwl-2000.c index 2e823bd..1b32ad4 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-2000.c @@ -62,7 +62,6 @@ static const struct iwl_base_params iwl2000_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = 0, .max_ll_items = OTP_MAX_LL_ITEMS_2x00, .shadow_ram_support = true, .led_compensation = 51, @@ -76,7 +75,6 @@ static const struct iwl_base_params iwl2000_base_params = { static const struct iwl_base_params iwl2030_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = 0, .max_ll_items = OTP_MAX_LL_ITEMS_2x00, .shadow_ram_support = true, .led_compensation = 57, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-5000.c b/drivers/net/wireless/intel/iwlwifi/iwl-5000.c index 4c3e3cf..4aa8f0a 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-5000.c @@ -53,7 +53,7 @@ static const struct iwl_base_params iwl5000_base_params = { .eeprom_size = IWLAGN_EEPROM_IMG_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .pll_cfg = true, .led_compensation = 51, .wd_timeout = IWL_WATCHDOG_DISABLED, .max_event_log_size = 512, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-6000.c b/drivers/net/wireless/intel/iwlwifi/iwl-6000.c index 5a7b7e1..0b9f6a7 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-6000.c @@ -71,7 +71,6 @@ static const struct iwl_base_params iwl6000_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = 0, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, @@ -84,7 +83,6 @@ static const struct iwl_base_params iwl6000_base_params = { static const struct iwl_base_params iwl6050_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = 0, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, .led_compensation = 51, @@ -97,7 +95,6 @@ static const struct iwl_base_params iwl6050_base_params = { static const struct iwl_base_params iwl6000_g2_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, - .pll_cfg_val = 0, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 57, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c index abd2904..f4d9215 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c @@ -122,7 +122,6 @@ static const struct iwl_base_params iwl7000_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_7000, .num_of_queues = 31, - .pll_cfg_val = 0, .shadow_ram_support = true, .led_compensation = 57, .wd_timeout = IWL_LONG_WD_TIMEOUT, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c index d6bff16..8bf11c9 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c @@ -112,7 +112,6 @@ static const struct iwl_base_params iwl8000_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000, .num_of_queues = 31, - .pll_cfg_val = 0, .shadow_ram_support = true, .led_compensation = 57, .wd_timeout = IWL_LONG_WD_TIMEOUT, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c index a0eeb53..3ac298f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-9000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-9000.c @@ -87,7 +87,6 @@ static const struct iwl_base_params iwl9000_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_9000, .num_of_queues = 31, - .pll_cfg_val = 0, .shadow_ram_support = true, .led_compensation = 57, .wd_timeout = IWL_LONG_WD_TIMEOUT, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 6eef5dc..4a0af7d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -6,6 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. + * Copyright (C) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,6 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright (C) 2016 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -165,20 +167,22 @@ static inline u8 num_of_ant(u8 mask) * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. */ struct iwl_base_params { - int eeprom_size; - int num_of_queues; /* def: HW dependent */ - /* for iwl_pcie_apm_init() */ - u32 pll_cfg_val; - - const u16 max_ll_items; - const bool shadow_ram_support; - u16 led_compensation; unsigned int wd_timeout; - u32 max_event_log_size; - const bool shadow_reg_enable; - const bool pcie_l1_allowed; - const bool apmg_wake_up_wa; - const bool scd_chain_ext_wa; + + u16 eeprom_size; + u16 max_event_log_size; + + u8 pll_cfg:1, /* for iwl_pcie_apm_init() */ + shadow_ram_support:1, + shadow_reg_enable:1, + pcie_l1_allowed:1, + apmg_wake_up_wa:1, + scd_chain_ext_wa:1; + + u8 num_of_queues; /* def: HW dependent */ + + u8 max_ll_items; + u8 led_compensation; }; /* @@ -189,10 +193,10 @@ struct iwl_base_params { */ struct iwl_ht_params { enum ieee80211_smps_mode smps_mode; - const bool ht_greenfield_support; /* if used set to true */ - const bool stbc; - const bool ldpc; - bool use_rts_for_aggregation; + u8 ht_greenfield_support:1, + stbc:1, + ldpc:1, + use_rts_for_aggregation:1; u8 ht40_bands; }; @@ -233,10 +237,10 @@ struct iwl_tt_params { u32 tx_protection_entry; u32 tx_protection_exit; struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE]; - bool support_ct_kill; - bool support_dynamic_smps; - bool support_tx_protection; - bool support_tx_backoff; + u8 support_ct_kill:1, + support_dynamic_smps:1, + support_tx_protection:1, + support_tx_backoff:1; }; /* @@ -324,51 +328,51 @@ struct iwl_cfg { /* params specific to an individual device within a device family */ const char *name; const char *fw_name_pre; - const unsigned int ucode_api_max; - const unsigned int ucode_api_min; - const enum iwl_device_family device_family; - const u32 max_data_size; - const u32 max_inst_size; - u8 valid_tx_ant; - u8 valid_rx_ant; - u8 non_shared_ant; - bool bt_shared_single_ant; - u16 nvm_ver; - u16 nvm_calib_ver; /* params not likely to change within a device family */ const struct iwl_base_params *base_params; /* params likely to change within a device family */ const struct iwl_ht_params *ht_params; const struct iwl_eeprom_params *eeprom_params; - enum iwl_led_mode led_mode; - const bool rx_with_siso_diversity; - const bool internal_wimax_coex; - const bool host_interrupt_operation_mode; - bool high_temp; - u8 nvm_hw_section_num; - bool mac_addr_from_csr; - bool lp_xtal_workaround; const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; - bool no_power_up_nic_in_init; const char *default_nvm_file_B_step; const char *default_nvm_file_C_step; - netdev_features_t features; - unsigned int max_rx_agg_size; - bool disable_dummy_notification; - unsigned int max_tx_agg_size; - unsigned int max_ht_ampdu_exponent; - unsigned int max_vht_ampdu_exponent; - const u32 dccm_offset; - const u32 dccm_len; - const u32 dccm2_offset; - const u32 dccm2_len; - const u32 smem_offset; - const u32 smem_len; const struct iwl_tt_params *thermal_params; - bool apmg_not_supported; - bool mq_rx_supported; - bool vht_mu_mimo_supported; - bool rf_id; + enum iwl_device_family device_family; + enum iwl_led_mode led_mode; + u32 max_data_size; + u32 max_inst_size; + netdev_features_t features; + u32 dccm_offset; + u32 dccm_len; + u32 dccm2_offset; + u32 dccm2_len; + u32 smem_offset; + u32 smem_len; + u16 nvm_ver; + u16 nvm_calib_ver; + u16 rx_with_siso_diversity:1, + bt_shared_single_ant:1, + internal_wimax_coex:1, + host_interrupt_operation_mode:1, + high_temp:1, + mac_addr_from_csr:1, + lp_xtal_workaround:1, + no_power_up_nic_in_init:1, + disable_dummy_notification:1, + apmg_not_supported:1, + mq_rx_supported:1, + vht_mu_mimo_supported:1, + rf_id:1; + u8 valid_tx_ant; + u8 valid_rx_ant; + u8 non_shared_ant; + u8 nvm_hw_section_num; + u8 max_rx_agg_size; + u8 max_tx_agg_size; + u8 max_ht_ampdu_exponent; + u8 max_vht_ampdu_exponent; + u8 ucode_api_max; + u8 ucode_api_min; }; /* diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index eb9bdf0..edf9e23 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -269,9 +269,8 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans) iwl_pcie_apm_config(trans); /* Configure analog phase-lock-loop before activating to D0A */ - if (trans->cfg->base_params->pll_cfg_val) - iwl_set_bit(trans, CSR_ANA_PLL_CFG, - trans->cfg->base_params->pll_cfg_val); + if (trans->cfg->base_params->pll_cfg) + iwl_set_bit(trans, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); /* * Set "initialization complete" bit to move adapter from -- cgit v1.1 From fbbd48595f2689619bab6957c6c2ee2895005b51 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Tue, 12 Apr 2016 15:16:24 +0300 Subject: iwlwifi: turn on SGI support for VHT 160MHz Devices supporting VHT 160MHz width are supporting also Short GI. Turn on this capability in vht cap. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index e99624d..21653fe 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -377,8 +377,8 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; if (data->vht160_supported) - vht_cap->cap |= - IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; + vht_cap->cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | + IEEE80211_VHT_CAP_SHORT_GI_160; if (cfg->vht_mu_mimo_supported) vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; -- cgit v1.1 From b7a08b284dcf7fb3d7b99473a87fabad04b2c548 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Apr 2016 10:24:59 +0200 Subject: iwlwifi: pcie: extend device reset delay Newer hardware generations will take longer to be accessible again after reset, so we need to wait longer before continuing any flow that did a reset. Rather than make the wait time configurable, simply extend it for all. Since all of these code paths can sleep, use usleep_range() rather than mdelay(). Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index edf9e23..59fd17a 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -360,8 +360,7 @@ static void iwl_pcie_apm_lp_xtal_enable(struct iwl_trans *trans) /* Reset entire device - do controller reset (results in SHRD_HW_RST) */ iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); + usleep_range(1000, 2000); /* * Set "initialization complete" bit to move adapter from @@ -407,8 +406,7 @@ static void iwl_pcie_apm_lp_xtal_enable(struct iwl_trans *trans) * SHRD_HW_RST). Turn MAC off before proceeding. */ iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); + usleep_range(1000, 2000); /* Enable LP XTAL by indirect access through CSR */ apmg_gp1_reg = iwl_trans_pcie_read_shr(trans, SHR_APMG_GP1_REG); @@ -505,8 +503,7 @@ static void iwl_pcie_apm_stop(struct iwl_trans *trans, bool op_mode_leave) /* Reset the entire device */ iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); + usleep_range(1000, 2000); /* * Clear "initialization complete" bit to move adapter from @@ -1073,7 +1070,7 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) /* stop and reset the on-board processor */ iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - udelay(20); + usleep_range(1000, 2000); /* * Upon stop, the APM issues an interrupt if HW RF kill is set. @@ -1525,8 +1522,7 @@ static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power) /* Reset the entire device */ iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - usleep_range(10, 15); + usleep_range(1000, 2000); iwl_pcie_apm_init(trans); -- cgit v1.1 From 192185d68dcc9b4517001fcec645111946f84d40 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Apr 2016 10:31:14 +0200 Subject: iwlwifi: pcie: avoid msleep() with short timeout Since msleep is based on jiffies, it can sleep for a long time. Use usleep_range() instead to shorten the maximum time. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 59fd17a..f603d78 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -582,7 +582,7 @@ static int iwl_pcie_prepare_card_hw(struct iwl_trans *trans) iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG, CSR_RESET_LINK_PWR_MGMT_DISABLED); - msleep(1); + usleep_range(1000, 2000); for (iter = 0; iter < 10; iter++) { /* If HW is not ready, prepare the conditions to check again */ @@ -1945,7 +1945,7 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans, u32 txq_bm) "WR pointer moved while flushing %d -> %d\n", wr_ptr, write_ptr)) return -ETIMEDOUT; - msleep(1); + usleep_range(1000, 2000); } if (q->read_ptr != q->write_ptr) { -- cgit v1.1 From cf961e16620f88686e0662753bd92d8383f36862 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Thu, 13 Aug 2015 19:16:08 +0300 Subject: iwlwifi: mvm: support dqa-mode agg on non-shared queue In non-shared queues, DQA requires re-configuring existing queues to become aggregated rather than allocating a new one. It also requires "un-aggregating" an existing queue when aggregations are turned off. Support this requirement for non-shared queues. Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 33 ++++- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 9 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 148 ++++++++++++++++++---- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 15 ++- drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 37 +++++- 6 files changed, 207 insertions(+), 40 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index cd71017..e5f267b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -452,7 +452,10 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) if (mvm->trans->max_skb_frags) hw->netdev_features = NETIF_F_HIGHDMA | NETIF_F_SG; - hw->queues = mvm->first_agg_queue; + if (!iwl_mvm_is_dqa_supported(mvm)) + hw->queues = mvm->first_agg_queue; + else + hw->queues = IEEE80211_MAX_QUEUES; hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE; hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FEC | IEEE80211_RADIOTAP_MCS_HAVE_STBC; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 820f8d6..ffbd41d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -671,6 +671,28 @@ struct iwl_mvm_baid_data { struct iwl_mvm_reorder_buffer reorder_buf[]; }; +/* + * enum iwl_mvm_queue_status - queue status + * @IWL_MVM_QUEUE_FREE: the queue is not allocated nor reserved + * Basically, this means that this queue can be used for any purpose + * @IWL_MVM_QUEUE_RESERVED: queue is reserved but not yet in use + * This is the state of a queue that has been dedicated for some RATID + * (agg'd or not), but that hasn't yet gone through the actual enablement + * of iwl_mvm_enable_txq(), and therefore no traffic can go through it yet. + * Note that in this state there is no requirement to already know what TID + * should be used with this queue, it is just marked as a queue that will + * be used, and shouldn't be allocated to anyone else. + * @IWL_MVM_QUEUE_READY: queue is ready to be used + * This is the state of a queue that has been fully configured (including + * SCD pointers, etc), has a specific RA/TID assigned to it, and can be + * used to send traffic. + */ +enum iwl_mvm_queue_status { + IWL_MVM_QUEUE_FREE, + IWL_MVM_QUEUE_RESERVED, + IWL_MVM_QUEUE_READY, +}; + struct iwl_mvm { /* for logger access */ struct device *dev; @@ -726,13 +748,8 @@ struct iwl_mvm { u32 hw_queue_to_mac80211; u8 hw_queue_refcount; u8 ra_sta_id; /* The RA this queue is mapped to, if exists */ - /* - * This is to mark that queue is reserved for a STA but not yet - * allocated. This is needed to make sure we have at least one - * available queue to use when adding a new STA - */ - bool setup_reserved; u16 tid_bitmap; /* Bitmap of the TIDs mapped to this queue */ + enum iwl_mvm_queue_status status; } queue_info[IWL_MAX_HW_QUEUES]; spinlock_t queue_info_lock; /* For syncing queue mgmt operations */ struct work_struct add_stream_wk; /* To add streams to queues */ @@ -1631,6 +1648,10 @@ static inline void iwl_mvm_stop_device(struct iwl_mvm *mvm) void iwl_mvm_start_mac_queues(struct iwl_mvm *mvm, unsigned long mq); void iwl_mvm_stop_mac_queues(struct iwl_mvm *mvm, unsigned long mq); +/* Re-configure the SCD for a queue that has already been configured */ +int iwl_mvm_reconfig_scd(struct iwl_mvm *mvm, int queue, int fifo, int sta_id, + int tid, int frame_limit, u16 ssn); + /* Thermal management and CT-kill */ void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff); void iwl_mvm_tt_temp_changed(struct iwl_mvm *mvm, u32 temp); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 6f91c5b..a68054f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -554,8 +554,13 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, mvm->restart_fw = iwlwifi_mod_params.restart_fw ? -1 : 0; mvm->aux_queue = 15; - mvm->first_agg_queue = 16; - mvm->last_agg_queue = mvm->cfg->base_params->num_of_queues - 1; + if (!iwl_mvm_is_dqa_supported(mvm)) { + mvm->first_agg_queue = 16; + mvm->last_agg_queue = mvm->cfg->base_params->num_of_queues - 1; + } else { + mvm->first_agg_queue = IWL_MVM_DQA_MIN_DATA_QUEUE; + mvm->last_agg_queue = IWL_MVM_DQA_MAX_DATA_QUEUE; + } if (mvm->cfg->base_params->num_of_queues == 16) { mvm->aux_queue = 11; mvm->first_agg_queue = 12; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 855684a..fea4d3437 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -326,6 +326,7 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm, u8 mac_queue = mvmsta->vif->hw_queue[ac]; int queue = -1; int ssn; + int ret; lockdep_assert_held(&mvm->mutex); @@ -354,8 +355,15 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm, if (queue < 0) queue = iwl_mvm_find_free_queue(mvm, IWL_MVM_DQA_MIN_DATA_QUEUE, IWL_MVM_DQA_MAX_DATA_QUEUE); + + /* + * Mark TXQ as ready, even though it hasn't been fully configured yet, + * to make sure no one else takes it. + * This will allow avoiding re-acquiring the lock at the end of the + * configuration. On error we'll mark it back as free. + */ if (queue >= 0) - mvm->queue_info[queue].setup_reserved = false; + mvm->queue_info[queue].status = IWL_MVM_QUEUE_READY; spin_unlock_bh(&mvm->queue_info_lock); @@ -387,7 +395,16 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm, mvmsta->reserved_queue = IEEE80211_INVAL_HW_QUEUE; spin_unlock_bh(&mvmsta->lock); - return iwl_mvm_sta_send_to_fw(mvm, sta, true, STA_MODIFY_QUEUES); + ret = iwl_mvm_sta_send_to_fw(mvm, sta, true, STA_MODIFY_QUEUES); + if (ret) + goto out_err; + + return 0; + +out_err: + iwl_mvm_disable_txq(mvm, queue, mac_queue, tid, 0); + + return ret; } static inline u8 iwl_mvm_tid_to_ac_queue(int tid) @@ -493,7 +510,8 @@ static int iwl_mvm_reserve_sta_stream(struct iwl_mvm *mvm, /* Make sure we have free resources for this STA */ if (vif_type == NL80211_IFTYPE_STATION && !sta->tdls && !mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].hw_queue_refcount && - !mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].setup_reserved) + (mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].status == + IWL_MVM_QUEUE_FREE)) queue = IWL_MVM_DQA_BSS_CLIENT_QUEUE; else queue = iwl_mvm_find_free_queue(mvm, IWL_MVM_DQA_MIN_DATA_QUEUE, @@ -503,7 +521,7 @@ static int iwl_mvm_reserve_sta_stream(struct iwl_mvm *mvm, IWL_ERR(mvm, "No available queues for new station\n"); return -ENOSPC; } - mvm->queue_info[queue].setup_reserved = true; + mvm->queue_info[queue].status = IWL_MVM_QUEUE_RESERVED; spin_unlock_bh(&mvm->queue_info_lock); @@ -1398,7 +1416,9 @@ static int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, mvm_sta->tfd_queue_msk |= BIT(queue); mvm_sta->tid_disable_agg &= ~BIT(tid); } else { - mvm_sta->tfd_queue_msk &= ~BIT(queue); + /* In DQA-mode the queue isn't removed on agg termination */ + if (!iwl_mvm_is_dqa_supported(mvm)) + mvm_sta->tfd_queue_msk &= ~BIT(queue); mvm_sta->tid_disable_agg |= BIT(tid); } @@ -1481,17 +1501,35 @@ int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, spin_lock_bh(&mvm->queue_info_lock); - txq_id = iwl_mvm_find_free_queue(mvm, mvm->first_agg_queue, - mvm->last_agg_queue); - if (txq_id < 0) { - ret = txq_id; - spin_unlock_bh(&mvm->queue_info_lock); - IWL_ERR(mvm, "Failed to allocate agg queue\n"); - goto release_locks; + /* + * Note the possible cases: + * 1. In DQA mode with an enabled TXQ - TXQ needs to become agg'ed + * 2. Non-DQA mode: the TXQ hasn't yet been enabled, so find a free + * one and mark it as reserved + * 3. In DQA mode, but no traffic yet on this TID: same treatment as in + * non-DQA mode, since the TXQ hasn't yet been allocated + */ + txq_id = mvmsta->tid_data[tid].txq_id; + if (!iwl_mvm_is_dqa_supported(mvm) || + mvm->queue_info[txq_id].status != IWL_MVM_QUEUE_READY) { + txq_id = iwl_mvm_find_free_queue(mvm, mvm->first_agg_queue, + mvm->last_agg_queue); + if (txq_id < 0) { + ret = txq_id; + spin_unlock_bh(&mvm->queue_info_lock); + IWL_ERR(mvm, "Failed to allocate agg queue\n"); + goto release_locks; + } + + /* TXQ hasn't yet been enabled, so mark it only as reserved */ + mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_RESERVED; } - mvm->queue_info[txq_id].setup_reserved = true; spin_unlock_bh(&mvm->queue_info_lock); + IWL_DEBUG_TX_QUEUES(mvm, + "AGG for tid %d will be on queue #%d\n", + tid, txq_id); + tid_data = &mvmsta->tid_data[tid]; tid_data->ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); tid_data->txq_id = txq_id; @@ -1526,6 +1564,7 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, unsigned int wdg_timeout = iwl_mvm_get_wd_timeout(mvm, vif, sta->tdls, false); int queue, ret; + bool alloc_queue = true; u16 ssn; struct iwl_trans_txq_scd_cfg cfg = { @@ -1551,8 +1590,46 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, cfg.fifo = iwl_mvm_ac_to_tx_fifo[tid_to_mac80211_ac[tid]]; - iwl_mvm_enable_txq(mvm, queue, vif->hw_queue[tid_to_mac80211_ac[tid]], - ssn, &cfg, wdg_timeout); + /* In DQA mode, the existing queue might need to be reconfigured */ + if (iwl_mvm_is_dqa_supported(mvm)) { + spin_lock_bh(&mvm->queue_info_lock); + /* Maybe there is no need to even alloc a queue... */ + if (mvm->queue_info[queue].status == IWL_MVM_QUEUE_READY) + alloc_queue = false; + spin_unlock_bh(&mvm->queue_info_lock); + + /* + * Only reconfig the SCD for the queue if the window size has + * changed from current (become smaller) + */ + if (!alloc_queue && buf_size < mvmsta->max_agg_bufsize) { + /* + * If reconfiguring an existing queue, it first must be + * drained + */ + ret = iwl_trans_wait_tx_queue_empty(mvm->trans, + BIT(queue)); + if (ret) { + IWL_ERR(mvm, + "Error draining queue before reconfig\n"); + return ret; + } + + ret = iwl_mvm_reconfig_scd(mvm, queue, cfg.fifo, + mvmsta->sta_id, tid, + buf_size, ssn); + if (ret) { + IWL_ERR(mvm, + "Error reconfiguring TXQ #%d\n", queue); + return ret; + } + } + } + + if (alloc_queue) + iwl_mvm_enable_txq(mvm, queue, + vif->hw_queue[tid_to_mac80211_ac[tid]], ssn, + &cfg, wdg_timeout); ret = iwl_mvm_sta_tx_agg(mvm, sta, tid, queue, true); if (ret) @@ -1560,7 +1637,7 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, /* No need to mark as reserved */ spin_lock_bh(&mvm->queue_info_lock); - mvm->queue_info[queue].setup_reserved = false; + mvm->queue_info[queue].status = IWL_MVM_QUEUE_READY; spin_unlock_bh(&mvm->queue_info_lock); /* @@ -1607,9 +1684,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, mvmsta->agg_tids &= ~BIT(tid); - /* No need to mark as reserved anymore */ spin_lock_bh(&mvm->queue_info_lock); - mvm->queue_info[txq_id].setup_reserved = false; + /* + * The TXQ is marked as reserved only if no traffic came through yet + * This means no traffic has been sent on this TID (agg'd or not), so + * we no longer have use for the queue. Since it hasn't even been + * allocated through iwl_mvm_enable_txq, so we can just mark it back as + * free. + */ + if (mvm->queue_info[txq_id].status == IWL_MVM_QUEUE_RESERVED) + mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_FREE; spin_unlock_bh(&mvm->queue_info_lock); switch (tid_data->state) { @@ -1635,9 +1719,11 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false); - iwl_mvm_disable_txq(mvm, txq_id, - vif->hw_queue[tid_to_mac80211_ac[tid]], tid, - 0); + if (!iwl_mvm_is_dqa_supported(mvm)) { + int mac_queue = vif->hw_queue[tid_to_mac80211_ac[tid]]; + + iwl_mvm_disable_txq(mvm, txq_id, mac_queue, tid, 0); + } return 0; case IWL_AGG_STARTING: case IWL_EMPTYING_HW_QUEUE_ADDBA: @@ -1688,9 +1774,16 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, mvmsta->agg_tids &= ~BIT(tid); spin_unlock_bh(&mvmsta->lock); - /* No need to mark as reserved */ spin_lock_bh(&mvm->queue_info_lock); - mvm->queue_info[txq_id].setup_reserved = false; + /* + * The TXQ is marked as reserved only if no traffic came through yet + * This means no traffic has been sent on this TID (agg'd or not), so + * we no longer have use for the queue. Since it hasn't even been + * allocated through iwl_mvm_enable_txq, so we can just mark it back as + * free. + */ + if (mvm->queue_info[txq_id].status == IWL_MVM_QUEUE_RESERVED) + mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_FREE; spin_unlock_bh(&mvm->queue_info_lock); if (old_state >= IWL_AGG_ON) { @@ -1703,9 +1796,12 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false); - iwl_mvm_disable_txq(mvm, tid_data->txq_id, - vif->hw_queue[tid_to_mac80211_ac[tid]], tid, - 0); + if (!iwl_mvm_is_dqa_supported(mvm)) { + int mac_queue = vif->hw_queue[tid_to_mac80211_ac[tid]]; + + iwl_mvm_disable_txq(mvm, tid_data->txq_id, mac_queue, + tid, 0); + } } return 0; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index ff615b9..779bafc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -933,7 +933,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb, spin_unlock(&mvmsta->lock); - if (txq_id < mvm->first_agg_queue) + /* Increase pending frames count if this isn't AMPDU */ + if (!is_ampdu) atomic_inc(&mvm->pending_frames[mvmsta->sta_id]); return 0; @@ -1181,6 +1182,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, u8 skb_freed = 0; u16 next_reclaimed, seq_ctl; bool is_ndp = false; + bool txq_agg = false; /* Is this TXQ aggregated */ __skb_queue_head_init(&skbs); @@ -1311,6 +1313,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, bool send_eosp_ndp = false; spin_lock_bh(&mvmsta->lock); + txq_agg = (mvmsta->tid_data[tid].state == IWL_AGG_ON); + if (!is_ndp) { tid_data->next_reclaimed = next_reclaimed; IWL_DEBUG_TX_REPLY(mvm, @@ -1366,11 +1370,11 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_id >= mvm->first_agg_queue) + if (txq_agg) goto out; /* We can't free more than one frame at once on a shared queue */ - WARN_ON(skb_freed > 1); + WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1)); /* If we have still frames for this STA nothing to do here */ if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) @@ -1465,8 +1469,11 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, int tid = IWL_MVM_TX_RES_GET_TID(tx_resp->ra_tid); u16 sequence = le16_to_cpu(pkt->hdr.sequence); struct iwl_mvm_sta *mvmsta; + int queue = SEQ_TO_QUEUE(sequence); - if (WARN_ON_ONCE(SEQ_TO_QUEUE(sequence) < mvm->first_agg_queue)) + if (WARN_ON_ONCE(queue < mvm->first_agg_queue && + (!iwl_mvm_is_dqa_supported(mvm) || + (queue != IWL_MVM_DQA_BSS_CLIENT_QUEUE)))) return; if (WARN_ON_ONCE(tid == IWL_TID_NON_QOS)) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index eb41d3b..161b99e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -587,12 +587,45 @@ int iwl_mvm_find_free_queue(struct iwl_mvm *mvm, u8 minq, u8 maxq) for (i = minq; i <= maxq; i++) if (mvm->queue_info[i].hw_queue_refcount == 0 && - !mvm->queue_info[i].setup_reserved) + mvm->queue_info[i].status == IWL_MVM_QUEUE_FREE) return i; return -ENOSPC; } +int iwl_mvm_reconfig_scd(struct iwl_mvm *mvm, int queue, int fifo, int sta_id, + int tid, int frame_limit, u16 ssn) +{ + struct iwl_scd_txq_cfg_cmd cmd = { + .scd_queue = queue, + .enable = 1, + .window = frame_limit, + .sta_id = sta_id, + .ssn = cpu_to_le16(ssn), + .tx_fifo = fifo, + .aggregate = (queue >= IWL_MVM_DQA_MIN_DATA_QUEUE || + queue == IWL_MVM_DQA_BSS_CLIENT_QUEUE), + .tid = tid, + }; + int ret; + + spin_lock_bh(&mvm->queue_info_lock); + if (WARN(mvm->queue_info[queue].hw_queue_refcount == 0, + "Trying to reconfig unallocated queue %d\n", queue)) { + spin_unlock_bh(&mvm->queue_info_lock); + return -ENXIO; + } + spin_unlock_bh(&mvm->queue_info_lock); + + IWL_DEBUG_TX_QUEUES(mvm, "Reconfig SCD for TXQ #%d\n", queue); + + ret = iwl_mvm_send_cmd_pdu(mvm, SCD_QUEUE_CFG, 0, sizeof(cmd), &cmd); + WARN_ONCE(ret, "Failed to re-configure queue %d on FIFO %d, ret=%d\n", + queue, fifo, ret); + + return ret; +} + void iwl_mvm_enable_txq(struct iwl_mvm *mvm, int queue, int mac80211_queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int wdg_timeout) @@ -688,6 +721,8 @@ void iwl_mvm_disable_txq(struct iwl_mvm *mvm, int queue, int mac80211_queue, mvm->queue_info[queue].hw_queue_refcount--; cmd.enable = mvm->queue_info[queue].hw_queue_refcount ? 1 : 0; + if (!cmd.enable) + mvm->queue_info[queue].status = IWL_MVM_QUEUE_FREE; IWL_DEBUG_TX_QUEUES(mvm, "Disabling TXQ #%d refcount=%d (mac80211 map:0x%x)\n", -- cgit v1.1 From 1554ed20882798b1da3d9830b0d996a0bc1aaecd Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 17 Apr 2016 15:08:59 +0300 Subject: iwlwifi: pcie: use shadow registers for updating write pointer The RX queues have a shadow register for the write pointer that enables updates without grabbing NIC access. Use them instead of the periphery registers because accessing those is much more expensive. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 3 +++ drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h index 582008a..270f39e 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h @@ -321,6 +321,9 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) /* Write index table */ #define RFH_Q0_FRBDCB_WIDX 0xA08080 #define RFH_Q_FRBDCB_WIDX(q) (RFH_Q0_FRBDCB_WIDX + (q) * 4) +/* Write index table - shadow registers */ +#define RFH_Q0_FRBDCB_WIDX_TRG 0x1C80 +#define RFH_Q_FRBDCB_WIDX_TRG(q) (RFH_Q0_FRBDCB_WIDX_TRG + (q) * 4) /* Read index table */ #define RFH_Q0_FRBDCB_RIDX 0xA080C0 #define RFH_Q_FRBDCB_RIDX(q) (RFH_Q0_FRBDCB_RIDX + (q) * 4) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index 89f87f7..3477821 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -208,8 +208,8 @@ static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans, rxq->write_actual = round_down(rxq->write, 8); if (trans->cfg->mq_rx_supported) - iwl_write_prph(trans, RFH_Q_FRBDCB_WIDX(rxq->id), - rxq->write_actual); + iwl_write32(trans, RFH_Q_FRBDCB_WIDX_TRG(rxq->id), + rxq->write_actual); /* * write to FH_RSCSR_CHNL0_WPTR register even in MQ as a W/A to * hardware shadow registers bug - writing to RFH_Q_FRBDCB_WIDX will -- cgit v1.1 From dfcfeef96cf56d2be344250ca472ca559b722112 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Tue, 12 Apr 2016 18:41:32 +0300 Subject: iwlwifi: pcie: grab NIC access only once on RX init When initializing RX we grab NIC access for every read and write. This is redundant - we can just grab access once. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 97 ++++++++++++++++------------ 1 file changed, 57 insertions(+), 40 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index 3477821..0a4a3c5 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -161,10 +161,11 @@ static inline __le32 iwl_pcie_dma_addr2rbd_ptr(dma_addr_t dma_addr) return cpu_to_le32((u32)(dma_addr >> 8)); } -static void iwl_pcie_write_prph_64(struct iwl_trans *trans, u64 ofs, u64 val) +static void iwl_pcie_write_prph_64_no_grab(struct iwl_trans *trans, u64 ofs, + u64 val) { - iwl_write_prph(trans, ofs, val & 0xffffffff); - iwl_write_prph(trans, ofs + 4, val >> 32); + iwl_write_prph_no_grab(trans, ofs, val & 0xffffffff); + iwl_write_prph_no_grab(trans, ofs + 4, val >> 32); } /* @@ -698,6 +699,7 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 rb_size; + unsigned long flags; const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ switch (trans_pcie->rx_buf_size) { @@ -715,23 +717,26 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; } + if (!iwl_trans_grab_nic_access(trans, &flags)) + return; + /* Stop Rx DMA */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + iwl_write32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); /* reset and flush pointers */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0); - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0); - iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0); + iwl_write32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0); + iwl_write32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0); + iwl_write32(trans, FH_RSCSR_CHNL0_RDPTR, 0); /* Reset driver's Rx queue write index */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + iwl_write32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); /* Tell device where to find RBD circular buffer in DRAM */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - (u32)(rxq->bd_dma >> 8)); + iwl_write32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG, + (u32)(rxq->bd_dma >> 8)); /* Tell device where in DRAM to update its Rx status */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG, - rxq->rb_stts_dma >> 4); + iwl_write32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG, + rxq->rb_stts_dma >> 4); /* Enable Rx DMA * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in @@ -741,13 +746,15 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) * RB timeout 0x10 * 256 RBDs */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - rb_size| - (RX_RB_TIMEOUT << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + iwl_write32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | + FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + rb_size | + (RX_RB_TIMEOUT << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | + (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + + iwl_trans_release_nic_access(trans, &flags); /* Set interrupt coalescing timer to default (2048 usecs) */ iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); @@ -761,6 +768,7 @@ static void iwl_pcie_rx_mq_hw_init(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 rb_size, enabled = 0; + unsigned long flags; int i; switch (trans_pcie->rx_buf_size) { @@ -778,25 +786,31 @@ static void iwl_pcie_rx_mq_hw_init(struct iwl_trans *trans) rb_size = RFH_RXF_DMA_RB_SIZE_4K; } + if (!iwl_trans_grab_nic_access(trans, &flags)) + return; + /* Stop Rx DMA */ - iwl_write_prph(trans, RFH_RXF_DMA_CFG, 0); + iwl_write_prph_no_grab(trans, RFH_RXF_DMA_CFG, 0); /* disable free amd used rx queue operation */ - iwl_write_prph(trans, RFH_RXF_RXQ_ACTIVE, 0); + iwl_write_prph_no_grab(trans, RFH_RXF_RXQ_ACTIVE, 0); for (i = 0; i < trans->num_rx_queues; i++) { /* Tell device where to find RBD free table in DRAM */ - iwl_pcie_write_prph_64(trans, RFH_Q_FRBDCB_BA_LSB(i), - (u64)(trans_pcie->rxq[i].bd_dma)); + iwl_pcie_write_prph_64_no_grab(trans, + RFH_Q_FRBDCB_BA_LSB(i), + trans_pcie->rxq[i].bd_dma); /* Tell device where to find RBD used table in DRAM */ - iwl_pcie_write_prph_64(trans, RFH_Q_URBDCB_BA_LSB(i), - (u64)(trans_pcie->rxq[i].used_bd_dma)); + iwl_pcie_write_prph_64_no_grab(trans, + RFH_Q_URBDCB_BA_LSB(i), + trans_pcie->rxq[i].used_bd_dma); /* Tell device where in DRAM to update its Rx status */ - iwl_pcie_write_prph_64(trans, RFH_Q_URBD_STTS_WPTR_LSB(i), - trans_pcie->rxq[i].rb_stts_dma); + iwl_pcie_write_prph_64_no_grab(trans, + RFH_Q_URBD_STTS_WPTR_LSB(i), + trans_pcie->rxq[i].rb_stts_dma); /* Reset device indice tables */ - iwl_write_prph(trans, RFH_Q_FRBDCB_WIDX(i), 0); - iwl_write_prph(trans, RFH_Q_FRBDCB_RIDX(i), 0); - iwl_write_prph(trans, RFH_Q_URBDCB_WIDX(i), 0); + iwl_write_prph_no_grab(trans, RFH_Q_FRBDCB_WIDX(i), 0); + iwl_write_prph_no_grab(trans, RFH_Q_FRBDCB_RIDX(i), 0); + iwl_write_prph_no_grab(trans, RFH_Q_URBDCB_WIDX(i), 0); enabled |= BIT(i) | BIT(i + 16); } @@ -812,23 +826,26 @@ static void iwl_pcie_rx_mq_hw_init(struct iwl_trans *trans) * Drop frames that exceed RB size * 512 RBDs */ - iwl_write_prph(trans, RFH_RXF_DMA_CFG, - RFH_DMA_EN_ENABLE_VAL | - rb_size | RFH_RXF_DMA_SINGLE_FRAME_MASK | - RFH_RXF_DMA_MIN_RB_4_8 | - RFH_RXF_DMA_DROP_TOO_LARGE_MASK | - RFH_RXF_DMA_RBDCB_SIZE_512); + iwl_write_prph_no_grab(trans, RFH_RXF_DMA_CFG, + RFH_DMA_EN_ENABLE_VAL | + rb_size | RFH_RXF_DMA_SINGLE_FRAME_MASK | + RFH_RXF_DMA_MIN_RB_4_8 | + RFH_RXF_DMA_DROP_TOO_LARGE_MASK | + RFH_RXF_DMA_RBDCB_SIZE_512); /* * Activate DMA snooping. * Set RX DMA chunk size to 64B * Default queue is 0 */ - iwl_write_prph(trans, RFH_GEN_CFG, RFH_GEN_CFG_RFH_DMA_SNOOP | - (DEFAULT_RXQ_NUM << RFH_GEN_CFG_DEFAULT_RXQ_NUM_POS) | - RFH_GEN_CFG_SERVICE_DMA_SNOOP); + iwl_write_prph_no_grab(trans, RFH_GEN_CFG, RFH_GEN_CFG_RFH_DMA_SNOOP | + (DEFAULT_RXQ_NUM << + RFH_GEN_CFG_DEFAULT_RXQ_NUM_POS) | + RFH_GEN_CFG_SERVICE_DMA_SNOOP); /* Enable the relevant rx queues */ - iwl_write_prph(trans, RFH_RXF_RXQ_ACTIVE, enabled); + iwl_write_prph_no_grab(trans, RFH_RXF_RXQ_ACTIVE, enabled); + + iwl_trans_release_nic_access(trans, &flags); /* Set interrupt coalescing timer to default (2048 usecs) */ iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); -- cgit v1.1 From 5c8877593a44ae914327a7fe850645766635b9b9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 14 Mar 2016 15:21:06 +0200 Subject: iwlwifi: add default value to disable_11ac mod param description Small change to make it clear that the default value is false. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index b338230..60a6c36 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1724,4 +1724,4 @@ MODULE_PARM_DESC(d0i3_timeout, "Timeout to D0i3 entry when idle (ms)"); module_param_named(disable_11ac, iwlwifi_mod_params.disable_11ac, bool, S_IRUGO); -MODULE_PARM_DESC(disable_11ac, "Disable VHT capabilities"); +MODULE_PARM_DESC(disable_11ac, "Disable VHT capabilities (default: false)"); -- cgit v1.1 From af5e964f3045b66f1cd720b9c5abd37e47e613e2 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 19 Apr 2016 12:03:45 +0300 Subject: MAINTAINERS: add myself as co-maintainer of the iwlwifi driver I'm starting to take a more active role in the iwlwifi driver maintainership. Cc: Emmanuel Grumbach Cc: Johannes Berg Signed-off-by: Luca Coelho --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4851f02..31983f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5831,6 +5831,7 @@ F: drivers/net/wireless/intel/iwlegacy/ INTEL WIRELESS WIFI LINK (iwlwifi) M: Johannes Berg M: Emmanuel Grumbach +M: Luca Coelho M: Intel Linux Wireless L: linux-wireless@vger.kernel.org W: http://intellinuxwireless.org -- cgit v1.1 From 6fe813e3d5618a1fdc77497f8d74938e975b63fa Mon Sep 17 00:00:00 2001 From: Guy Mishol Date: Thu, 14 Apr 2016 11:58:17 +0300 Subject: wlcore/wl12xx: Fix fw logger over sdio The commit fb724ed5c617 ("wlcore: Fix regression in wlcore_set_partition()") fixed wl12xx functionality. However, it reverted the support in fw logger over sdio in wl18xx. This patch reverts the changes made and also fixes the original functionality issue introduced in wl12xx. Fixes: fb724ed5c617 ("wlcore: Fix regression in wlcore_set_partition()") Signed-off-by: Guy Mishol Signed-off-by: Kalle Valo --- drivers/net/wireless/ti/wl12xx/main.c | 4 ++-- drivers/net/wireless/ti/wlcore/io.c | 17 ++++++++++++++--- drivers/net/wireless/ti/wlcore/io.h | 3 ++- 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 58b9d3c..22009e1 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -553,8 +553,8 @@ static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = { .size = 0x00000004 }, .mem3 = { - .start = 0x00040404, - .size = 0x00000000 + .start = 0x00000000, + .size = 0x00040404 }, }, diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c index 564ca75..1cc6d5a 100644 --- a/drivers/net/wireless/ti/wlcore/io.c +++ b/drivers/net/wireless/ti/wlcore/io.c @@ -175,14 +175,25 @@ int wlcore_set_partition(struct wl1271 *wl, if (ret < 0) goto out; - /* We don't need the size of the last partition, as it is - * automatically calculated based on the total memory size and - * the sizes of the previous partitions. + /* wl12xx only: We don't need the size of the last partition, + * as it is automatically calculated based on the total memory + * size and the sizes of the previous partitions. + * + * wl18xx re-defines the HW_PART3 addresses for logger over + * SDIO support. wl12xx is expecting the write to + * HW_PART3_START_ADDR at offset 24. This creates conflict + * between the addresses. + * In order to fix this the expected value is written to + * HW_PART3_SIZE_ADDR instead which is at offset 24 after changes. */ ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); if (ret < 0) goto out; + ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size); + if (ret < 0) + goto out; + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h index 10cf374..704ce64 100644 --- a/drivers/net/wireless/ti/wlcore/io.h +++ b/drivers/net/wireless/ti/wlcore/io.h @@ -36,7 +36,8 @@ #define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12) #define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16) #define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20) -#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) +#define HW_PART3_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) +#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 28) #define HW_ACCESS_REGISTER_SIZE 4 -- cgit v1.1 From 1bfcfdcca142f6468c665016b2b58c3012196af0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 1 May 2016 21:57:44 +0200 Subject: rtlwifi: rtl818x: constify rtl_intf_ops structures The rtl_intf_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/pci.c | 2 +- drivers/net/wireless/realtek/rtlwifi/pci.h | 2 +- drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +- drivers/net/wireless/realtek/rtlwifi/wifi.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index 1ac41b8..66030ea 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -2456,7 +2456,7 @@ int rtl_pci_resume(struct device *dev) EXPORT_SYMBOL(rtl_pci_resume); #endif /* CONFIG_PM_SLEEP */ -struct rtl_intf_ops rtl_pci_ops = { +const struct rtl_intf_ops rtl_pci_ops = { .read_efuse_byte = read_efuse_byte, .adapter_start = rtl_pci_start, .adapter_stop = rtl_pci_stop, diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.h b/drivers/net/wireless/realtek/rtlwifi/pci.h index 5da6703..b951eba 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.h +++ b/drivers/net/wireless/realtek/rtlwifi/pci.h @@ -286,7 +286,7 @@ struct rtl_pci_priv { int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw); -extern struct rtl_intf_ops rtl_pci_ops; +extern const struct rtl_intf_ops rtl_pci_ops; int rtl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id); diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index aac1ed3..41617b7 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1049,7 +1049,7 @@ static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work) rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask); } -static struct rtl_intf_ops rtl_usb_ops = { +static const struct rtl_intf_ops rtl_usb_ops = { .adapter_start = rtl_usb_start, .adapter_stop = rtl_usb_stop, .adapter_tx = rtl_usb_tx, diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h index 11d9c23..4e0ab4d 100644 --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -2593,7 +2593,7 @@ struct rtl_priv { *intf_ops : for diff interrface usb/pcie */ struct rtl_hal_cfg *cfg; - struct rtl_intf_ops *intf_ops; + const struct rtl_intf_ops *intf_ops; /*this var will be set by set_bit, and was used to indicate status of -- cgit v1.1 From 873ffe154ae074c46ed2d72dbd9a2a99f06f55b4 Mon Sep 17 00:00:00 2001 From: wang yanqing Date: Tue, 3 May 2016 00:38:36 +0800 Subject: rtlwifi: Fix logic error in enter/exit power-save mode In commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), the tests for enter/exit power-save mode were inverted. With this change applied, the wifi connection becomes much more stable. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Signed-off-by: Wang YanQing CC: Stable [3.10+] Acked-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c index c74eb13..264466f 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -1660,9 +1660,9 @@ void rtl_watchdog_wq_callback(void *data) if (((rtlpriv->link_info.num_rx_inperiod + rtlpriv->link_info.num_tx_inperiod) > 8) || (rtlpriv->link_info.num_rx_inperiod > 2)) - rtl_lps_enter(hw); - else rtl_lps_leave(hw); + else + rtl_lps_enter(hw); } rtlpriv->link_info.num_rx_inperiod = 0; -- cgit v1.1 From 30cfe9f61c2e78b55b33c780bc0a57f9adb00e62 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 3 May 2016 21:44:40 +0200 Subject: mwifiex: Drop unnecessary include pcieport_if.h This header file is only needed for drivers binding to a PCI bridge device allocated by drivers/pci/pcie/portdrv_core.c. The mwifiex driver doesn't do that nor use any symbols defined in pcieport_if.h. Cc: Amitkumar Karwar Cc: Nishant Sarmukadam Signed-off-by: Lukas Wunner Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/pcie.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h index 9a1d09d..2592e63 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.h +++ b/drivers/net/wireless/marvell/mwifiex/pcie.h @@ -23,7 +23,6 @@ #define _MWIFIEX_PCIE_H #include -#include #include #include "decl.h" -- cgit v1.1 From 2f8514b8b03643a598706bf88214b10153324d11 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 May 2016 09:16:39 +0300 Subject: rtlwifi: rtl818x: silence uninitialized variable warning What about if "rtlphy->pwrgroup_cnt" is 2? In that case we would use an uninitialized "chnlgroup" variable and probably crash. Maybe that can't happen for some reason which is not obvious but in that case this patch is harmless. Setting it to zero seems like a standard default in the surrounding code so it's probably fine here as well. Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c index 78a81c1..9475aa2 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c @@ -208,8 +208,7 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw, "Realtek regulatory, 40MHz, writeval = 0x%x\n", writeval); } else { - if (rtlphy->pwrgroup_cnt == 1) - chnlgroup = 0; + chnlgroup = 0; if (rtlphy->pwrgroup_cnt >= 3) { if (chnl <= 3) -- cgit v1.1 From 496aec577b5183716ed9d8bcc853ad9003485fe8 Mon Sep 17 00:00:00 2001 From: Christian Daudt Date: Wed, 4 May 2016 17:55:20 -0700 Subject: brcmfmac: Add 4356 sdio support This adds support for the 4356-sdio wireless chip. Signed-off-by: Christian Daudt Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 + drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 1 + drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++- include/linux/mmc/sdio_ids.h | 1 + 4 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index 2fc0597..c7550da 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -1098,6 +1098,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = { BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430), BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345), BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354), + BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356), { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c index 0e8f2a0..d3fd6b1 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c @@ -1333,6 +1333,7 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub) switch (pub->chip) { case BRCM_CC_4354_CHIP_ID: + case BRCM_CC_4356_CHIP_ID: /* explicitly check SR engine enable bit */ pmu_cc3_mask = BIT(2); /* fall-through */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 4252fa8..67e69bf 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -609,6 +609,7 @@ BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt"); BRCMF_FW_NVRAM_DEF(43430, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt"); BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt"); BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt"); +BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-sdio.bin", "brcmfmac4356-sdio.txt"); static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143), @@ -624,7 +625,8 @@ static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, 43430), BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455), - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354) + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356) }; static void pkt_align(struct sk_buff *p, int len, int align) diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 83430f2..0d126ae 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -36,6 +36,7 @@ #define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6 #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345 #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 +#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356 #define SDIO_VENDOR_ID_INTEL 0x0089 #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 -- cgit v1.1 From 976aff5fc94b0a505ccd85391f0e82c3d2d031e9 Mon Sep 17 00:00:00 2001 From: wang yanqing Date: Thu, 5 May 2016 23:08:22 +0800 Subject: rtlwifi: Remove double check for cnt_after_linked rtl_lps_enter does two successive check for cnt_after_linked to make sure some time has elapsed after linked. The second check isn't necessary, because if cnt_after_linked is bigger than 5, it is bigger than 2 of course! This patch remove the second check code. Signed-off-by: Wang YanQing Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/ps.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/ps.c b/drivers/net/wireless/realtek/rtlwifi/ps.c index b69321d..93579ca 100644 --- a/drivers/net/wireless/realtek/rtlwifi/ps.c +++ b/drivers/net/wireless/realtek/rtlwifi/ps.c @@ -443,14 +443,10 @@ void rtl_lps_enter(struct ieee80211_hw *hw) spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag); - /* Idle for a while if we connect to AP a while ago. */ - if (mac->cnt_after_linked >= 2) { - if (ppsc->dot11_psmode == EACTIVE) { - RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, - "Enter 802.11 power save mode...\n"); - - rtl_lps_set_psmode(hw, EAUTOPS); - } + if (ppsc->dot11_psmode == EACTIVE) { + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + "Enter 802.11 power save mode...\n"); + rtl_lps_set_psmode(hw, EAUTOPS); } spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag); -- cgit v1.1 From cf968937d27751296920e6b82ffa89735e3a0023 Mon Sep 17 00:00:00 2001 From: wang yanqing Date: Sat, 7 May 2016 00:33:53 +0800 Subject: rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring We can't use kfree_skb in irq disable context, because spin_lock_irqsave make sure we are always in irq disable context, use dev_kfree_skb_irq instead of kfree_skb is better than dev_kfree_skb_any. This patch fix below kernel warning: [ 7612.095528] ------------[ cut here ]------------ [ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80() [ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common [ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4 [ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454 [ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400 [ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8 [ 7612.095604] Call Trace: [ 7612.095614] [] dump_stack+0x41/0x5c [ 7612.095620] [] warn_slowpath_common+0x89/0xc0 [ 7612.095628] [] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095634] [] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095640] [] warn_slowpath_null+0x1d/0x20 [ 7612.095646] [] __local_bh_enable_ip+0x58/0x80 [ 7612.095653] [] destroy_conntrack+0x64/0xa0 [ 7612.095660] [] nf_conntrack_destroy+0xf/0x20 [ 7612.095665] [] skb_release_head_state+0x55/0xa0 [ 7612.095670] [] skb_release_all+0xb/0x20 [ 7612.095674] [] __kfree_skb+0xb/0x60 [ 7612.095679] [] kfree_skb+0x30/0x70 [ 7612.095686] [] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095692] [] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095698] [] rtl_pci_start+0x19/0x190 [rtl_pci] [ 7612.095705] [] rtl_op_start+0x56/0x90 [rtlwifi] [ 7612.095712] [] drv_start+0x36/0xc0 [ 7612.095717] [] ieee80211_do_open+0x2d3/0x890 [ 7612.095725] [] ? call_netdevice_notifiers_info+0x2e/0x60 [ 7612.095730] [] ieee80211_open+0x4d/0x50 [ 7612.095736] [] __dev_open+0xa3/0x130 [ 7612.095742] [] ? _raw_spin_unlock_bh+0x13/0x20 [ 7612.095748] [] __dev_change_flags+0x89/0x140 [ 7612.095753] [] ? selinux_capable+0xd/0x10 [ 7612.095759] [] dev_change_flags+0x29/0x60 [ 7612.095765] [] devinet_ioctl+0x553/0x670 [ 7612.095772] [] ? _copy_to_user+0x28/0x40 [ 7612.095777] [] inet_ioctl+0x85/0xb0 [ 7612.095783] [] sock_ioctl+0x67/0x260 [ 7612.095788] [] ? sock_fasync+0x80/0x80 [ 7612.095795] [] do_vfs_ioctl+0x6b/0x550 [ 7612.095800] [] ? selinux_file_ioctl+0x102/0x1e0 [ 7612.095807] [] ? timekeeping_suspend+0x294/0x320 [ 7612.095813] [] ? __hrtimer_run_queues+0x14a/0x210 [ 7612.095820] [] ? security_file_ioctl+0x34/0x50 [ 7612.095827] [] SyS_ioctl+0x70/0x80 [ 7612.095832] [] do_fast_syscall_32+0x84/0x120 [ 7612.095839] [] sysenter_past_esp+0x36/0x55 [ 7612.095844] ---[ end trace 97e9c637a20e8348 ]--- Signed-off-by: Wang YanQing Cc: Stable Acked-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index 66030ea..d12586d 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -1572,7 +1572,7 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw) true, HW_DESC_TXBUFF_ADDR), skb->len, PCI_DMA_TODEVICE); - kfree_skb(skb); + dev_kfree_skb_irq(skb); ring->idx = (ring->idx + 1) % ring->entries; } ring->idx = 0; -- cgit v1.1 From 50d4d8feb9133abb5b8fcb22c48ec509295fdc43 Mon Sep 17 00:00:00 2001 From: Wei-Ning Huang Date: Tue, 10 May 2016 14:21:23 +0800 Subject: mwifiex: fixup error messages Use dev_err instead of pr_err and add newline character at the end. Signed-off-by: Wei-Ning Huang Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/sdio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index 099722e..bdc51ff 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -104,7 +104,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card) if (!dev->of_node || !of_match_node(mwifiex_sdio_of_match_table, dev->of_node)) { - pr_err("sdio platform data not available"); + dev_err(dev, "sdio platform data not available\n"); return -1; } @@ -115,7 +115,8 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card) if (cfg && card->plt_of_node) { cfg->irq_wifi = irq_of_parse_and_map(card->plt_of_node, 0); if (!cfg->irq_wifi) { - dev_err(dev, "fail to parse irq_wifi from device tree"); + dev_err(dev, + "fail to parse irq_wifi from device tree\n"); } else { ret = devm_request_irq(dev, cfg->irq_wifi, mwifiex_wake_irq_wifi, -- cgit v1.1 From 03ba4a1b718e3a018f38f1ee030de4cd052bb3f3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 May 2016 22:20:37 +0300 Subject: airo: prevent potential underflow in airo_set_freq() I'm not sure if this can underflow but Smatch complains. It seems harmless to add a check for negatives. Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo --- drivers/net/wireless/cisco/airo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c index 4bd9e2b..833b46c 100644 --- a/drivers/net/wireless/cisco/airo.c +++ b/drivers/net/wireless/cisco/airo.c @@ -5794,7 +5794,7 @@ static int airo_set_freq(struct net_device *dev, fwrq->m = ieee80211_frequency_to_channel(f); } /* Setting by channel number */ - if((fwrq->m > 1000) || (fwrq->e > 0)) + if (fwrq->m < 0 || fwrq->m > 1000 || fwrq->e > 0) rc = -EOPNOTSUPP; else { int channel = fwrq->m; -- cgit v1.1 From d9739a26fbcaa11c026dd79bc310af96003f20d8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 May 2016 22:21:17 +0300 Subject: atmel: potential underflow in atmel_set_freq() Smatch complains that we cap the upper bound of "fwrq->m" but not the lower bound. I don't know if it can actually happen but it's simple enough to check for negatives. Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo --- drivers/net/wireless/atmel/atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/atmel/atmel.c b/drivers/net/wireless/atmel/atmel.c index 8f8f37f..bf2e9a0 100644 --- a/drivers/net/wireless/atmel/atmel.c +++ b/drivers/net/wireless/atmel/atmel.c @@ -2275,7 +2275,7 @@ static int atmel_set_freq(struct net_device *dev, fwrq->m = ieee80211_frequency_to_channel(f); } /* Setting by channel number */ - if ((fwrq->m > 1000) || (fwrq->e > 0)) + if (fwrq->m < 0 || fwrq->m > 1000 || fwrq->e > 0) rc = -EOPNOTSUPP; else { int channel = fwrq->m; -- cgit v1.1 From 10d599ad84a1b98450c8867ce548ea4bf0f6df1a Mon Sep 17 00:00:00 2001 From: Maya Erez Date: Mon, 9 May 2016 21:57:11 +0300 Subject: wil6210: add support for device led configuration Add the ability to configure the device led to be used for notifying the AP activity (60G device supports leds 0-2). The host can also configure the blinking frequency of the led in three states. Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/debugfs.c | 115 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/wil6210/main.c | 3 + drivers/net/wireless/ath/wil6210/wil6210.h | 25 +++++++ drivers/net/wireless/ath/wil6210/wmi.c | 77 +++++++++++++++++++ drivers/net/wireless/ath/wil6210/wmi.h | 61 +++++++++++++++ 5 files changed, 281 insertions(+) diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c index 5d8823d..a8098b4 100644 --- a/drivers/net/wireless/ath/wil6210/debugfs.c +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -1441,6 +1441,118 @@ static const struct file_operations fops_sta = { .llseek = seq_lseek, }; +static ssize_t wil_read_file_led_cfg(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[80]; + int n; + + n = snprintf(buf, sizeof(buf), + "led_id is set to %d, echo 1 to enable, 0 to disable\n", + led_id); + + n = min_t(int, n, sizeof(buf)); + + return simple_read_from_buffer(user_buf, count, ppos, + buf, n); +} + +static ssize_t wil_write_file_led_cfg(struct file *file, + const char __user *buf_, + size_t count, loff_t *ppos) +{ + struct wil6210_priv *wil = file->private_data; + int val; + int rc; + + rc = kstrtoint_from_user(buf_, count, 0, &val); + if (rc) { + wil_err(wil, "Invalid argument\n"); + return rc; + } + + wil_info(wil, "%s led %d\n", val ? "Enabling" : "Disabling", led_id); + rc = wmi_led_cfg(wil, val); + if (rc) { + wil_info(wil, "%s led %d failed\n", + val ? "Enabling" : "Disabling", led_id); + return rc; + } + + return count; +} + +static const struct file_operations fops_led_cfg = { + .read = wil_read_file_led_cfg, + .write = wil_write_file_led_cfg, + .open = simple_open, +}; + +/* led_blink_time, write: + * " + */ +static ssize_t wil_write_led_blink_time(struct file *file, + const char __user *buf, + size_t len, loff_t *ppos) +{ + int rc; + char *kbuf = kmalloc(len + 1, GFP_KERNEL); + + if (!kbuf) + return -ENOMEM; + + rc = simple_write_to_buffer(kbuf, len, ppos, buf, len); + if (rc != len) { + kfree(kbuf); + return rc >= 0 ? -EIO : rc; + } + + kbuf[len] = '\0'; + rc = sscanf(kbuf, "%d %d %d %d %d %d", + &led_blink_time[WIL_LED_TIME_SLOW].on_ms, + &led_blink_time[WIL_LED_TIME_SLOW].off_ms, + &led_blink_time[WIL_LED_TIME_MED].on_ms, + &led_blink_time[WIL_LED_TIME_MED].off_ms, + &led_blink_time[WIL_LED_TIME_FAST].on_ms, + &led_blink_time[WIL_LED_TIME_FAST].off_ms); + kfree(kbuf); + + if (rc < 0) + return rc; + if (rc < 6) + return -EINVAL; + + return len; +} + +static ssize_t wil_read_led_blink_time(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + static char text[400]; + + snprintf(text, sizeof(text), + "To set led blink on/off time variables write:\n" + " " + " \n" + "The current values are:\n" + "%d %d %d %d %d %d\n", + led_blink_time[WIL_LED_TIME_SLOW].on_ms, + led_blink_time[WIL_LED_TIME_SLOW].off_ms, + led_blink_time[WIL_LED_TIME_MED].on_ms, + led_blink_time[WIL_LED_TIME_MED].off_ms, + led_blink_time[WIL_LED_TIME_FAST].on_ms, + led_blink_time[WIL_LED_TIME_FAST].off_ms); + + return simple_read_from_buffer(user_buf, count, ppos, text, + sizeof(text)); +} + +static const struct file_operations fops_led_blink_time = { + .read = wil_read_led_blink_time, + .write = wil_write_led_blink_time, + .open = simple_open, +}; + /*----------------*/ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil, struct dentry *dbg) @@ -1489,6 +1601,8 @@ static const struct { {"link", S_IRUGO, &fops_link}, {"info", S_IRUGO, &fops_info}, {"recovery", S_IRUGO | S_IWUSR, &fops_recovery}, + {"led_cfg", S_IRUGO | S_IWUSR, &fops_led_cfg}, + {"led_blink_time", S_IRUGO | S_IWUSR, &fops_led_blink_time}, }; static void wil6210_debugfs_init_files(struct wil6210_priv *wil, @@ -1551,6 +1665,7 @@ static const struct dbg_off dbg_statics[] = { {"mem_addr", S_IRUGO | S_IWUSR, (ulong)&mem_addr, doff_u32}, {"vring_idle_trsh", S_IRUGO | S_IWUSR, (ulong)&vring_idle_trsh, doff_u32}, + {"led_polarity", S_IRUGO | S_IWUSR, (ulong)&led_polarity, doff_u8}, {}, }; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index f7ed651..8e31d75 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -841,6 +841,9 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false); wil_bcast_fini(wil); + /* Disable device led before reset*/ + wmi_led_cfg(wil, false); + /* prevent NAPI from being scheduled and prevent wmi commands */ mutex_lock(&wil->wmi_mutex); bitmap_zero(wil->status, wil_status_last); diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 74bc2c5..aa09cbc 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -546,6 +546,30 @@ struct wil_blob_wrapper { struct debugfs_blob_wrapper blob; }; +#define WIL_LED_MAX_ID (2) +#define WIL_LED_INVALID_ID (0xF) +#define WIL_LED_BLINK_ON_SLOW_MS (300) +#define WIL_LED_BLINK_OFF_SLOW_MS (300) +#define WIL_LED_BLINK_ON_MED_MS (200) +#define WIL_LED_BLINK_OFF_MED_MS (200) +#define WIL_LED_BLINK_ON_FAST_MS (100) +#define WIL_LED_BLINK_OFF_FAST_MS (100) +enum { + WIL_LED_TIME_SLOW = 0, + WIL_LED_TIME_MED, + WIL_LED_TIME_FAST, + WIL_LED_TIME_LAST, +}; + +struct blink_on_off_time { + u32 on_ms; + u32 off_ms; +}; + +extern struct blink_on_off_time led_blink_time[WIL_LED_TIME_LAST]; +extern u8 led_id; +extern u8 led_polarity; + struct wil6210_priv { struct pci_dev *pdev; struct wireless_dev *wdev; @@ -834,6 +858,7 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr); int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan, u8 hidden_ssid, u8 is_go); int wmi_pcp_stop(struct wil6210_priv *wil); +int wmi_led_cfg(struct wil6210_priv *wil, bool enable); void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid, u16 reason_code, bool from_event); void wil_probe_client_flush(struct wil6210_priv *wil); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 2e347ef..b80c5d8 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -32,6 +32,11 @@ module_param(agg_wsize, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(agg_wsize, " Window size for Tx Block Ack after connect;" " 0 - use default; < 0 - don't auto-establish"); +u8 led_id = WIL_LED_INVALID_ID; +module_param(led_id, byte, S_IRUGO); +MODULE_PARM_DESC(led_id, + " 60G device led enablement. Set the led ID (0-2) to enable"); + /** * WMI event receiving - theory of operations * @@ -94,6 +99,14 @@ const struct fw_map fw_mapping[] = { */ }; +struct blink_on_off_time led_blink_time[] = { + {WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS}, + {WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS}, + {WIL_LED_BLINK_ON_FAST_MS, WIL_LED_BLINK_OFF_FAST_MS}, +}; + +u8 led_polarity = LED_POLARITY_LOW_ACTIVE; + /** * return AHB address for given firmware/ucode internal (linker) address * @x - internal address @@ -971,6 +984,60 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr) return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd)); } +int wmi_led_cfg(struct wil6210_priv *wil, bool enable) +{ + int rc = 0; + struct wmi_led_cfg_cmd cmd = { + .led_mode = enable, + .id = led_id, + .slow_blink_cfg.blink_on = + cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].on_ms), + .slow_blink_cfg.blink_off = + cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].off_ms), + .medium_blink_cfg.blink_on = + cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].on_ms), + .medium_blink_cfg.blink_off = + cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].off_ms), + .fast_blink_cfg.blink_on = + cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].on_ms), + .fast_blink_cfg.blink_off = + cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].off_ms), + .led_polarity = led_polarity, + }; + struct { + struct wmi_cmd_hdr wmi; + struct wmi_led_cfg_done_event evt; + } __packed reply; + + if (led_id == WIL_LED_INVALID_ID) + goto out; + + if (led_id > WIL_LED_MAX_ID) { + wil_err(wil, "Invalid led id %d\n", led_id); + rc = -EINVAL; + goto out; + } + + wil_dbg_wmi(wil, + "%s led %d\n", + enable ? "enabling" : "disabling", led_id); + + rc = wmi_call(wil, WMI_LED_CFG_CMDID, &cmd, sizeof(cmd), + WMI_LED_CFG_DONE_EVENTID, &reply, sizeof(reply), + 100); + if (rc) + goto out; + + if (reply.evt.status) { + wil_err(wil, "led %d cfg failed with status %d\n", + led_id, le32_to_cpu(reply.evt.status)); + rc = -EINVAL; + } + +out: + return rc; +} + int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan, u8 hidden_ssid, u8 is_go) { @@ -1013,11 +1080,21 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, if (reply.evt.status != WMI_FW_STATUS_SUCCESS) rc = -EINVAL; + if (wmi_nettype != WMI_NETTYPE_P2P) + /* Don't fail due to error in the led configuration */ + wmi_led_cfg(wil, true); + return rc; } int wmi_pcp_stop(struct wil6210_priv *wil) { + int rc; + + rc = wmi_led_cfg(wil, false); + if (rc) + return rc; + return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0, WMI_PCP_STOPPED_EVENTID, NULL, 0, 20); } diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h index 29865e0..685fe0d 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.h +++ b/drivers/net/wireless/ath/wil6210/wmi.h @@ -129,6 +129,7 @@ enum wmi_command_id { WMI_THERMAL_THROTTLING_GET_STATUS_CMDID = 0x855, WMI_OTP_READ_CMDID = 0x856, WMI_OTP_WRITE_CMDID = 0x857, + WMI_LED_CFG_CMDID = 0x858, /* Performance monitoring commands */ WMI_BF_CTRL_CMDID = 0x862, WMI_NOTIFY_REQ_CMDID = 0x863, @@ -868,6 +869,7 @@ enum wmi_event_id { WMI_RX_MGMT_PACKET_EVENTID = 0x1840, WMI_TX_MGMT_PACKET_EVENTID = 0x1841, WMI_OTP_READ_RESULT_EVENTID = 0x1856, + WMI_LED_CFG_DONE_EVENTID = 0x1858, /* Performance monitoring events */ WMI_DATA_PORT_OPEN_EVENTID = 0x1860, WMI_WBE_LINK_DOWN_EVENTID = 0x1861, @@ -1349,4 +1351,63 @@ enum wmi_hidden_ssid { WMI_HIDDEN_SSID_CLEAR = 0xFE, }; +/* WMI_LED_CFG_CMDID + * + * Configure LED On\Off\Blinking operation + * + * Returned events: + * - WMI_LED_CFG_DONE_EVENTID + */ +enum led_mode { + LED_DISABLE = 0x00, + LED_ENABLE = 0x01, +}; + +/* The names of the led as + * described on HW schemes. + */ +enum wmi_led_id { + WMI_LED_WLAN = 0x00, + WMI_LED_WPAN = 0x01, + WMI_LED_WWAN = 0x02, +}; + +/* Led polarity mode. */ +enum wmi_led_polarity { + LED_POLARITY_HIGH_ACTIVE = 0x00, + LED_POLARITY_LOW_ACTIVE = 0x01, +}; + +/* Combination of on and off + * creates the blinking period + */ +struct wmi_led_blink_mode { + __le32 blink_on; + __le32 blink_off; +} __packed; + +/* WMI_LED_CFG_CMDID */ +struct wmi_led_cfg_cmd { + /* enum led_mode_e */ + u8 led_mode; + /* enum wmi_led_id_e */ + u8 id; + /* slow speed blinking combination */ + struct wmi_led_blink_mode slow_blink_cfg; + /* medium speed blinking combination */ + struct wmi_led_blink_mode medium_blink_cfg; + /* high speed blinking combination */ + struct wmi_led_blink_mode fast_blink_cfg; + /* polarity of the led */ + u8 led_polarity; + /* reserved */ + u8 reserved; +} __packed; + +/* WMI_LED_CFG_DONE_EVENTID */ +struct wmi_led_cfg_done_event { + /* led config status */ + __le32 status; +} __packed; + #endif /* __WILOCITY_WMI_H__ */ -- cgit v1.1 From 36bd39bb0ae8544e3f5b9c1af45f39f51075611b Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Mon, 9 May 2016 21:57:14 +0300 Subject: ath10k: suppress warnings when getting wmi peer_rate_code_list event In 10.4, fw sends WMI PEER_RATECODE_LIST_EVENTID after successful peer_assoc cmd. As of now this event is not of much use and not implemented. Change the debug level and messsage as appropriate to suppress "Unknown eventid: 36898". Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index f71c1fb..2c30032 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5269,6 +5269,7 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) ath10k_wmi_event_vdev_stopped(ar, skb); break; case WMI_10_4_WOW_WAKEUP_HOST_EVENTID: + case WMI_10_4_PEER_RATECODE_LIST_EVENTID: ath10k_dbg(ar, ATH10K_DBG_WMI, "received event id %d not implemented\n", id); break; -- cgit v1.1 From ee9ca147c59c0ee128bbf7fc079ee49401070086 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Mon, 9 May 2016 21:57:14 +0300 Subject: ath10k: Fix survey reporting with QCA4019 In QCA4019, cycle counter wraparound in same fashion as QCA988X. When the cycle counter wraparound it resets to 0x7fffffff. Set has_shifted_cc_wraparound to true for QCA4019 to enable the code path to handle cycle counter wraparound for consistent survey report. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index ee249e0..49af624 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -202,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .name = "qca4019 hw1.0", .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, .uart_pin = 7, + .has_shifted_cc_wraparound = true, .otp_exe_param = 0x0010000, .continuous_frag_desc = true, .channel_counters_freq_hz = 125000, -- cgit v1.1 From 63d443efe8be2c1d02b30d7e4edeb9aa085352b3 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 10 May 2016 23:17:59 +0200 Subject: batman-adv: fix skb deref after free batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len. Fixes: 953324776d6d ("batman-adv: network coding - buffer unicast packets before forward") Signed-off-by: Florian Westphal Reviewed-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/routing.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index ae850f2..e3857ed 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -601,6 +601,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb, struct batadv_unicast_packet *unicast_packet; struct ethhdr *ethhdr = eth_hdr(skb); int res, hdr_len, ret = NET_RX_DROP; + unsigned int len; unicast_packet = (struct batadv_unicast_packet *)skb->data; @@ -641,6 +642,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb, if (hdr_len > 0) batadv_skb_set_priority(skb, hdr_len); + len = skb->len; res = batadv_send_skb_to_orig(skb, orig_node, recv_if); /* translate transmit result into receive result */ @@ -648,7 +650,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb, /* skb was transmitted and consumed */ batadv_inc_counter(bat_priv, BATADV_CNT_FORWARD); batadv_add_counter(bat_priv, BATADV_CNT_FORWARD_BYTES, - skb->len + ETH_HLEN); + len + ETH_HLEN); ret = NET_RX_SUCCESS; } else if (res == NET_XMIT_POLICED) { -- cgit v1.1 From a45e932a3c58eac11a7458c6888910e23f615077 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 6 May 2016 11:43:38 +0200 Subject: batman-adv: Avoid nullptr derefence in batadv_v_neigh_is_sob batadv_neigh_ifinfo_get can return NULL when it cannot find (even when only temporarily) anymore the neigh_ifinfo in the list neigh->ifinfo_list. This has to be checked to avoid kernel Oopses when the ifinfo is dereferenced. This a situation which isn't expected but is already handled by functions like batadv_v_neigh_cmp. The same kind of warning is therefore used before the function returns without dereferencing the pointers. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_v.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index 3ff8bd1..50bfcf8 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -276,6 +277,9 @@ static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1, ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); + if (WARN_ON(!ifinfo1 || !ifinfo2)) + return false; + threshold = ifinfo1->bat_v.throughput / 4; threshold = ifinfo1->bat_v.throughput - threshold; -- cgit v1.1 From 71f9d27daa2cbcca7159c27f0c0c381cc2dd1053 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 6 May 2016 11:43:39 +0200 Subject: batman-adv: Fix refcnt leak in batadv_v_neigh_* The functions batadv_neigh_ifinfo_get increase the reference counter of the batadv_neigh_ifinfo. These have to be reduced again when the reference is not used anymore to correctly free the objects. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_v.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index 50bfcf8..4f626a6 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -256,14 +256,23 @@ static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1, struct batadv_hard_iface *if_outgoing2) { struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2; + int ret = 0; ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); + if (WARN_ON(!ifinfo1)) + goto err_ifinfo1; + ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); + if (WARN_ON(!ifinfo2)) + goto err_ifinfo2; - if (WARN_ON(!ifinfo1 || !ifinfo2)) - return 0; + ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput; - return ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput; + batadv_neigh_ifinfo_put(ifinfo2); +err_ifinfo2: + batadv_neigh_ifinfo_put(ifinfo1); +err_ifinfo1: + return ret; } static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1, @@ -273,17 +282,26 @@ static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1, { struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2; u32 threshold; + bool ret = false; ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); - ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); + if (WARN_ON(!ifinfo1)) + goto err_ifinfo1; - if (WARN_ON(!ifinfo1 || !ifinfo2)) - return false; + ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); + if (WARN_ON(!ifinfo2)) + goto err_ifinfo2; threshold = ifinfo1->bat_v.throughput / 4; threshold = ifinfo1->bat_v.throughput - threshold; - return ifinfo2->bat_v.throughput > threshold; + ret = ifinfo2->bat_v.throughput > threshold; + + batadv_neigh_ifinfo_put(ifinfo2); +err_ifinfo2: + batadv_neigh_ifinfo_put(ifinfo1); +err_ifinfo1: + return ret; } static struct batadv_algo_ops batadv_batman_v __read_mostly = { -- cgit v1.1 From f7dcdf5fdbe8fec7670d8f65a5db595c98e0ecab Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 22 Feb 2016 22:56:33 +0100 Subject: batman-adv: Fix unexpected free of bcast_own on add_if error The function batadv_iv_ogm_orig_add_if allocates new buffers for bcast_own and bcast_own_sum. It is expected that these buffers are unchanged in case either bcast_own or bcast_own_sum couldn't be resized. But the error handling of this function frees the already resized buffer for bcast_own when the allocation of the new bcast_own_sum buffer failed. This will lead to an invalid memory access when some code will try to access bcast_own. Instead the resized new bcast_own buffer has to be kept. This will not lead to problems because the size of the buffer was only increased and therefore no user of the buffer will try to access bytes outside of the new buffer. Fixes: d0015fdd3d2c ("batman-adv: provide orig_node routing API") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_iv_ogm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 7f98a9d..1b5bbaf 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -157,10 +157,8 @@ static int batadv_iv_ogm_orig_add_if(struct batadv_orig_node *orig_node, orig_node->bat_iv.bcast_own = data_ptr; data_ptr = kmalloc_array(max_if_num, sizeof(u8), GFP_ATOMIC); - if (!data_ptr) { - kfree(orig_node->bat_iv.bcast_own); + if (!data_ptr) goto unlock; - } memcpy(data_ptr, orig_node->bat_iv.bcast_own_sum, (max_if_num - 1) * sizeof(u8)); -- cgit v1.1 From 1653f61d656516aae7130db19561258a847d1e94 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 2 May 2016 01:14:40 +0800 Subject: batman-adv: make sure ELP/OGM orig MAC is updated on address change When the MAC address of the primary interface is changed, update the originator address in the ELP and OGM skb buffers as well in order to reflect the change. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Reported-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_v.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index 4f626a6..31bc57e 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -73,16 +73,34 @@ static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface) batadv_v_elp_iface_disable(hard_iface); } -static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface) -{ -} - static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface) { batadv_v_elp_primary_iface_set(hard_iface); batadv_v_ogm_primary_iface_set(hard_iface); } +/** + * batadv_v_iface_update_mac - react to hard-interface MAC address change + * @hard_iface: the modified interface + * + * If the modified interface is the primary one, update the originator + * address in the ELP and OGM messages to reflect the new MAC address. + */ +static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface) +{ + struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); + struct batadv_hard_iface *primary_if; + + primary_if = batadv_primary_if_get_selected(bat_priv); + if (primary_if != hard_iface) + goto out; + + batadv_v_primary_iface_set(hard_iface); +out: + if (primary_if) + batadv_hardif_put(primary_if); +} + static void batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh) { -- cgit v1.1 From d285f52cc0f23564fd61976d43fd5b991b4828f6 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 16 Feb 2016 10:47:07 +0100 Subject: batman-adv: Fix integer overflow in batadv_iv_ogm_calc_tq The undefined behavior sanatizer detected an signed integer overflow in a setup with near perfect link quality UBSAN: Undefined behaviour in net/batman-adv/bat_iv_ogm.c:1246:25 signed integer overflow: 8713350 * 255 cannot be represented in type 'int' The problems happens because the calculation of mixed unsigned and signed integers resulted in an integer multiplication. batadv_ogm_packet::tq (u8 255) * tq_own (u8 255) * tq_asym_penalty (int 134; max 255) * tq_iface_penalty (int 255; max 255) The tq_iface_penalty, tq_asym_penalty and inv_asym_penalty can just be changed to unsigned int because they are not expected to become negative. Fixes: c039876892e3 ("batman-adv: add WiFi penalty") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_iv_ogm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 1b5bbaf..ce2f203 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -1180,9 +1180,10 @@ static bool batadv_iv_ogm_calc_tq(struct batadv_orig_node *orig_node, u8 total_count; u8 orig_eq_count, neigh_rq_count, neigh_rq_inv, tq_own; unsigned int neigh_rq_inv_cube, neigh_rq_max_cube; - int tq_asym_penalty, inv_asym_penalty, if_num; + int if_num; + unsigned int tq_asym_penalty, inv_asym_penalty; unsigned int combined_tq; - int tq_iface_penalty; + unsigned int tq_iface_penalty; bool ret = false; /* find corresponding one hop neighbor */ -- cgit v1.1 From e123705e58bf171be8c6eb0902ebfb5d6ed255ad Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Thu, 7 Jan 2016 08:11:12 +0100 Subject: batman-adv: Avoid duplicate neigh_node additions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Two parallel calls to batadv_neigh_node_new() might race for creating and adding the same neig_node. Fix this by including the check for any already existing, identical neigh_node within the spin-lock. This fixes splats like the following: [ 739.535069] ------------[ cut here ]------------ [ 739.535079] WARNING: CPU: 0 PID: 0 at /usr/src/batman-adv/git/batman-adv/net/batman-adv/bat_iv_ogm.c:1004 batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv]() [ 739.535092] too many matching neigh_nodes [ 739.535094] Modules linked in: dm_mod tun ip6table_filter ip6table_mangle ip6table_nat nf_nat_ipv6 ip6_tables xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_TCPMSS xt_mark iptable_mangle xt_tcpudp xt_conntrack iptable_filter ip_tables x_tables ip_gre ip_tunnel gre bridge stp llc thermal_sys kvm_intel kvm crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd evdev pcspkr ip6_gre ip6_tunnel tunnel6 batman_adv(O) libcrc32c nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack autofs4 ext4 crc16 mbcache jbd2 xen_netfront xen_blkfront crc32c_intel [ 739.535177] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.2.0-0.bpo.1-amd64 #1 Debian 4.2.6-3~bpo8+2 [ 739.535186] 0000000000000000 ffffffffa013b050 ffffffff81554521 ffff88007d003c18 [ 739.535201] ffffffff8106fa01 0000000000000000 ffff8800047a087a ffff880079c3a000 [ 739.735602] ffff88007b82bf40 ffff88007bc2d1c0 ffffffff8106fa7a ffffffffa013aa8e [ 739.735624] Call Trace: [ 739.735639] [] ? dump_stack+0x40/0x50 [ 739.735677] [] ? warn_slowpath_common+0x81/0xb0 [ 739.735692] [] ? warn_slowpath_fmt+0x4a/0x50 [ 739.735715] [] ? batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv] [ 739.735740] [] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735762] [] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735783] [] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735804] [] ? batadv_batman_skb_recv+0xc9/0x110 [batman_adv] [ 739.735825] [] ? __netif_receive_skb_core+0x841/0x9a0 [ 739.735838] [] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735853] [] ? process_backlog+0xa1/0x140 [ 739.735864] [] ? net_rx_action+0x20a/0x320 [ 739.735878] [] ? __do_softirq+0x107/0x270 [ 739.735891] [] ? irq_exit+0x92/0xa0 [ 739.735905] [] ? xen_evtchn_do_upcall+0x31/0x40 [ 739.735924] [] ? xen_do_hypervisor_callback+0x1e/0x40 [ 739.735939] [] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735965] [] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735979] [] ? xen_safe_halt+0xc/0x20 [ 739.735991] [] ? default_idle+0x1c/0xa0 [ 739.736004] [] ? cpu_startup_entry+0x2eb/0x350 [ 739.736019] [] ? start_kernel+0x480/0x48b [ 739.736032] [] ? xen_start_kernel+0x507/0x511 [ 739.736048] ---[ end trace c106bb901244bc8c ]--- Fixes: f987ed6ebd99 ("batman-adv: protect neighbor list with rcu locks") Reported-by: Martin Weinelt Signed-off-by: Linus Lüssing Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/originator.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 1ff4ee4..7f51bc2 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -619,6 +619,8 @@ batadv_neigh_node_new(struct batadv_orig_node *orig_node, struct batadv_neigh_node *neigh_node; struct batadv_hardif_neigh_node *hardif_neigh = NULL; + spin_lock_bh(&orig_node->neigh_list_lock); + neigh_node = batadv_neigh_node_get(orig_node, hard_iface, neigh_addr); if (neigh_node) goto out; @@ -650,15 +652,15 @@ batadv_neigh_node_new(struct batadv_orig_node *orig_node, kref_init(&neigh_node->refcount); kref_get(&neigh_node->refcount); - spin_lock_bh(&orig_node->neigh_list_lock); hlist_add_head_rcu(&neigh_node->list, &orig_node->neigh_list); - spin_unlock_bh(&orig_node->neigh_list_lock); batadv_dbg(BATADV_DBG_BATMAN, orig_node->bat_priv, "Creating new neighbor %pM for orig_node %pM on interface %s\n", neigh_addr, orig_node->orig, hard_iface->net_dev->name); out: + spin_unlock_bh(&orig_node->neigh_list_lock); + if (hardif_neigh) batadv_hardif_neigh_put(hardif_neigh); return neigh_node; -- cgit v1.1 From ebe24cea95ab969f76f2922032f6c390fdc816f2 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sat, 7 May 2016 19:54:17 +0800 Subject: batman-adv: initialize ELP orig address on secondary interfaces This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator which can potentially interfere with the rest of the neighbor statistics. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_v.c | 10 ++++++++++ net/batman-adv/bat_v_elp.c | 31 ++++++++++++++++++++++--------- net/batman-adv/bat_v_elp.h | 2 ++ 3 files changed, 34 insertions(+), 9 deletions(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index 31bc57e..0a12e5c 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -40,6 +40,16 @@ static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface) { + struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); + struct batadv_hard_iface *primary_if; + + primary_if = batadv_primary_if_get_selected(bat_priv); + + if (primary_if) { + batadv_v_elp_iface_activate(primary_if, hard_iface); + batadv_hardif_put(primary_if); + } + /* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can * set the interface as ACTIVE right away, without any risk of race * condition diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 3844e7e..df42eb1 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -377,6 +377,27 @@ void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface) } /** + * batadv_v_elp_iface_activate - update the ELP buffer belonging to the given + * hard-interface + * @primary_iface: the new primary interface + * @hard_iface: interface holding the to-be-updated buffer + */ +void batadv_v_elp_iface_activate(struct batadv_hard_iface *primary_iface, + struct batadv_hard_iface *hard_iface) +{ + struct batadv_elp_packet *elp_packet; + struct sk_buff *skb; + + if (!hard_iface->bat_v.elp_skb) + return; + + skb = hard_iface->bat_v.elp_skb; + elp_packet = (struct batadv_elp_packet *)skb->data; + ether_addr_copy(elp_packet->orig, + primary_iface->net_dev->dev_addr); +} + +/** * batadv_v_elp_primary_iface_set - change internal data to reflect the new * primary interface * @primary_iface: the new primary interface @@ -384,8 +405,6 @@ void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface) void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface) { struct batadv_hard_iface *hard_iface; - struct batadv_elp_packet *elp_packet; - struct sk_buff *skb; /* update orig field of every elp iface belonging to this mesh */ rcu_read_lock(); @@ -393,13 +412,7 @@ void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface) if (primary_iface->soft_iface != hard_iface->soft_iface) continue; - if (!hard_iface->bat_v.elp_skb) - continue; - - skb = hard_iface->bat_v.elp_skb; - elp_packet = (struct batadv_elp_packet *)skb->data; - ether_addr_copy(elp_packet->orig, - primary_iface->net_dev->dev_addr); + batadv_v_elp_iface_activate(primary_iface, hard_iface); } rcu_read_unlock(); } diff --git a/net/batman-adv/bat_v_elp.h b/net/batman-adv/bat_v_elp.h index e95f1bc..cc130b2 100644 --- a/net/batman-adv/bat_v_elp.h +++ b/net/batman-adv/bat_v_elp.h @@ -25,6 +25,8 @@ struct work_struct; int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface); void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface); +void batadv_v_elp_iface_activate(struct batadv_hard_iface *primary_iface, + struct batadv_hard_iface *hard_iface); void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface); int batadv_v_elp_packet_recv(struct sk_buff *skb, struct batadv_hard_iface *if_incoming); -- cgit v1.1 From 099a728d5819da80ff9fff3df980ea6e89a01e60 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Tue, 17 May 2016 21:40:38 +0200 Subject: net: thunderx: avoid null pointer dereference In function bgx_lmac_handler only use a member of lmac after checking it is not null. Signed-off-by: Heinrich Schuchardt Acked-by: David Daney Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index d20539a..3ed2198 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -274,12 +274,14 @@ static void bgx_sgmii_change_link_state(struct lmac *lmac) static void bgx_lmac_handler(struct net_device *netdev) { struct lmac *lmac = container_of(netdev, struct lmac, netdev); - struct phy_device *phydev = lmac->phydev; + struct phy_device *phydev; int link_changed = 0; if (!lmac) return; + phydev = lmac->phydev; + if (!phydev->link && lmac->last_link) link_changed = -1; -- cgit v1.1 From 1740c29a46b30a2f157afc473156f157e599d4c2 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Tue, 17 May 2016 22:28:54 +0200 Subject: net: ehea: avoid null pointer dereference ehea_get_port may return NULL. Do not dereference NULL value. Fixes: 8c4877a4128e ("ehea: Use the standard logging functions") Signed-off-by: Heinrich Schuchardt Acked-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 2a0dc12..54efa9a 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1169,16 +1169,15 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe) ec = EHEA_BMASK_GET(NEQE_EVENT_CODE, eqe); portnum = EHEA_BMASK_GET(NEQE_PORTNUM, eqe); port = ehea_get_port(adapter, portnum); + if (!port) { + netdev_err(NULL, "unknown portnum %x\n", portnum); + return; + } dev = port->netdev; switch (ec) { case EHEA_EC_PORTSTATE_CHG: /* port state change */ - if (!port) { - netdev_err(dev, "unknown portnum %x\n", portnum); - break; - } - if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) { if (!netif_carrier_ok(dev)) { ret = ehea_sense_port_attr(port); -- cgit v1.1 From f1971a2e0393a86464caa77aa52168b731960dfa Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 17 May 2016 14:05:49 -0700 Subject: kcm: fix a signedness in kcm_splice_read() skb_splice_bits() returns int, kcm_splice_read() returns ssize_t, both are signed. We may need another patch to make them all ssize_t, but that deserves a separated patch. Fixes: 91687355b927 ("kcm: Splice support") Reported-by: David Binderman Cc: Tom Herbert Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/kcm/kcmsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 40662d73..0b68ba7 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -1483,7 +1483,7 @@ static ssize_t kcm_splice_read(struct socket *sock, loff_t *ppos, long timeo; struct kcm_rx_msg *rxm; int err = 0; - size_t copied; + ssize_t copied; struct sk_buff *skb; /* Only support splice for SOCKSEQPACKET */ -- cgit v1.1 From d113412859e49620ce8fe67d5ff9f34fe5006f99 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Tue, 17 May 2016 23:58:40 +0200 Subject: net: ieee802154/adf7242: syntax error ifdef DEBUG If DEBUG is defined, a superfluous closing brace is introduced. Signed-off-by: Heinrich Schuchardt Acked-by: Michael Hennerich Signed-off-by: David S. Miller --- drivers/net/ieee802154/adf7242.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index b82e39d..9fa7ac9 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -915,7 +915,6 @@ static void adf7242_debug(u8 irq1) (stat & 0xf) == RC_STATUS_PHY_RDY ? "RC_STATUS_PHY_RDY" : "", (stat & 0xf) == RC_STATUS_RX ? "RC_STATUS_RX" : "", (stat & 0xf) == RC_STATUS_TX ? "RC_STATUS_TX" : ""); - } #endif } -- cgit v1.1 From 30119059703f94e9e4936477bc33e918fb41e9c8 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Wed, 18 May 2016 00:06:02 +0200 Subject: net: irda: avoid null pointer dereference Only dereference variable self after checking it is not NULL. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/irda/nsc-ircc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 9ef13d8..aaecc3b 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -1253,7 +1253,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) */ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) { - struct net_device *dev = self->netdev; + struct net_device *dev; __u8 mcr = MCR_SIR; int iobase; __u8 bank; @@ -1263,6 +1263,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) IRDA_ASSERT(self != NULL, return 0;); + dev = self->netdev; iobase = self->io.fir_base; /* Update accounting for new speed */ -- cgit v1.1 From 074ba1e232f5a562ddd87e6ed0b342faae0aeb9b Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Wed, 18 May 2016 01:58:45 +0200 Subject: net: au1000 eth: simplify logical expression (a && a > 0) is equivalent to (a > 0). Signed-off-by: Heinrich Schuchardt Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index 9af309e..e0fb0f1 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -1269,7 +1269,7 @@ static int au1000_probe(struct platform_device *pdev) aup->phy_irq = pd->phy_irq; } - if (aup->phy_busid && aup->phy_busid > 0) { + if (aup->phy_busid > 0) { dev_err(&pdev->dev, "MAC0-associated PHY attached 2nd MACs MII bus not supported yet\n"); err = -ENODEV; goto err_mdiobus_alloc; -- cgit v1.1 From e00be9e4d0ffcc0121606229f0aa4b246d6881d7 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Wed, 18 May 2016 02:13:30 +0200 Subject: net: pegasus: remove dead coding (!count || count < 4) is always true. So let's remove the coding which is dead at least since 2005. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 53 ----------------------------------------------- 1 file changed, 53 deletions(-) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 36cd7f0..1903d2e 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -470,61 +470,8 @@ static void read_bulk_callback(struct urb *urb) return; default: netif_dbg(pegasus, rx_err, net, "RX status %d\n", status); - goto goon; } - if (!count || count < 4) - goto goon; - - rx_status = buf[count - 2]; - if (rx_status & 0x1e) { - netif_dbg(pegasus, rx_err, net, - "RX packet error %x\n", rx_status); - pegasus->stats.rx_errors++; - if (rx_status & 0x06) /* long or runt */ - pegasus->stats.rx_length_errors++; - if (rx_status & 0x08) - pegasus->stats.rx_crc_errors++; - if (rx_status & 0x10) /* extra bits */ - pegasus->stats.rx_frame_errors++; - goto goon; - } - if (pegasus->chip == 0x8513) { - pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer); - pkt_len &= 0x0fff; - pegasus->rx_skb->data += 2; - } else { - pkt_len = buf[count - 3] << 8; - pkt_len += buf[count - 4]; - pkt_len &= 0xfff; - pkt_len -= 4; - } - - /* - * If the packet is unreasonably long, quietly drop it rather than - * kernel panicing by calling skb_put. - */ - if (pkt_len > PEGASUS_MTU) - goto goon; - - /* - * at this point we are sure pegasus->rx_skb != NULL - * so we go ahead and pass up the packet. - */ - skb_put(pegasus->rx_skb, pkt_len); - pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net); - netif_rx(pegasus->rx_skb); - pegasus->stats.rx_packets++; - pegasus->stats.rx_bytes += pkt_len; - - if (pegasus->flags & PEGASUS_UNPLUG) - return; - - pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net, PEGASUS_MTU, - GFP_ATOMIC); - - if (pegasus->rx_skb == NULL) - goto tl_sched; goon: usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb, usb_rcvbulkpipe(pegasus->usb, 1), -- cgit v1.1 From 7cb001d4c4fa7e1cc1a55388a9544e160dddc610 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 May 2016 17:44:06 -0700 Subject: scsi_tcp: block BH in TCP callbacks iscsi_sw_tcp_data_ready() and iscsi_sw_tcp_state_change() were using read_lock(&sk->sk_callback_lock) which is fine if caller disabled BH. TCP stack no longer has this requirement and can run from process context. Use read_lock_bh() variant to restore previous assumption. Ideally this code could use RCU instead... Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Cc: Mike Christie Cc: Venkatesh Srinivas Acked-by: Mike Christie Signed-off-by: David S. Miller --- drivers/scsi/iscsi_tcp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 2e4c82f..ace4f1f 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -131,10 +131,10 @@ static void iscsi_sw_tcp_data_ready(struct sock *sk) struct iscsi_tcp_conn *tcp_conn; read_descriptor_t rd_desc; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); conn = sk->sk_user_data; if (!conn) { - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); return; } tcp_conn = conn->dd_data; @@ -154,7 +154,7 @@ static void iscsi_sw_tcp_data_ready(struct sock *sk) /* If we had to (atomically) map a highmem page, * unmap it now. */ iscsi_tcp_segment_unmap(&tcp_conn->in.segment); - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); } static void iscsi_sw_tcp_state_change(struct sock *sk) @@ -165,10 +165,10 @@ static void iscsi_sw_tcp_state_change(struct sock *sk) struct iscsi_session *session; void (*old_state_change)(struct sock *); - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); conn = sk->sk_user_data; if (!conn) { - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); return; } session = conn->session; @@ -179,7 +179,7 @@ static void iscsi_sw_tcp_state_change(struct sock *sk) tcp_sw_conn = tcp_conn->dd_data; old_state_change = tcp_sw_conn->old_state_change; - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); old_state_change(sk); } -- cgit v1.1 From e1daca289a36965d923ec26647b5668e023eb0ac Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 May 2016 17:44:07 -0700 Subject: ocfs2/cluster: block BH in TCP callbacks TCP stack can now run from process context. Use read_lock_bh() variant to restore previous assumption. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- fs/ocfs2/cluster/tcp.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 2d0acd6..4238eb2 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -600,10 +600,11 @@ static void o2net_set_nn_state(struct o2net_node *nn, static void o2net_data_ready(struct sock *sk) { void (*ready)(struct sock *sk); + struct o2net_sock_container *sc; - read_lock(&sk->sk_callback_lock); - if (sk->sk_user_data) { - struct o2net_sock_container *sc = sk->sk_user_data; + read_lock_bh(&sk->sk_callback_lock); + sc = sk->sk_user_data; + if (sc) { sclog(sc, "data_ready hit\n"); o2net_set_data_ready_time(sc); o2net_sc_queue_work(sc, &sc->sc_rx_work); @@ -611,7 +612,7 @@ static void o2net_data_ready(struct sock *sk) } else { ready = sk->sk_data_ready; } - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); ready(sk); } @@ -622,7 +623,7 @@ static void o2net_state_change(struct sock *sk) void (*state_change)(struct sock *sk); struct o2net_sock_container *sc; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); sc = sk->sk_user_data; if (sc == NULL) { state_change = sk->sk_state_change; @@ -649,7 +650,7 @@ static void o2net_state_change(struct sock *sk) break; } out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); state_change(sk); } @@ -2012,7 +2013,7 @@ static void o2net_listen_data_ready(struct sock *sk) { void (*ready)(struct sock *sk); - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); ready = sk->sk_user_data; if (ready == NULL) { /* check for teardown race */ ready = sk->sk_data_ready; @@ -2039,7 +2040,7 @@ static void o2net_listen_data_ready(struct sock *sk) } out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); if (ready != NULL) ready(sk); } -- cgit v1.1 From 38036629cded6b96a9f9689758a88d067c4d4d44 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 May 2016 17:44:08 -0700 Subject: rds: tcp: block BH in TCP callbacks TCP stack can now run from process context. Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous assumption. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/rds/tcp_connect.c | 4 ++-- net/rds/tcp_listen.c | 4 ++-- net/rds/tcp_recv.c | 4 ++-- net/rds/tcp_send.c | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/net/rds/tcp_connect.c b/net/rds/tcp_connect.c index 49a3fcf..fb82e0a 100644 --- a/net/rds/tcp_connect.c +++ b/net/rds/tcp_connect.c @@ -43,7 +43,7 @@ void rds_tcp_state_change(struct sock *sk) struct rds_connection *conn; struct rds_tcp_connection *tc; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); conn = sk->sk_user_data; if (!conn) { state_change = sk->sk_state_change; @@ -69,7 +69,7 @@ void rds_tcp_state_change(struct sock *sk) break; } out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); state_change(sk); } diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index be263cd..3fa3679 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -166,7 +166,7 @@ void rds_tcp_listen_data_ready(struct sock *sk) rdsdebug("listen data ready sk %p\n", sk); - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); ready = sk->sk_user_data; if (!ready) { /* check for teardown race */ ready = sk->sk_data_ready; @@ -183,7 +183,7 @@ void rds_tcp_listen_data_ready(struct sock *sk) rds_tcp_accept_work(sk); out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); ready(sk); } diff --git a/net/rds/tcp_recv.c b/net/rds/tcp_recv.c index d75d8b5..c3196f9 100644 --- a/net/rds/tcp_recv.c +++ b/net/rds/tcp_recv.c @@ -301,7 +301,7 @@ void rds_tcp_data_ready(struct sock *sk) rdsdebug("data ready sk %p\n", sk); - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); conn = sk->sk_user_data; if (!conn) { /* check for teardown race */ ready = sk->sk_data_ready; @@ -315,7 +315,7 @@ void rds_tcp_data_ready(struct sock *sk) if (rds_tcp_read_sock(conn, GFP_ATOMIC) == -ENOMEM) queue_delayed_work(rds_wq, &conn->c_recv_w, 0); out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); ready(sk); } diff --git a/net/rds/tcp_send.c b/net/rds/tcp_send.c index 2894e60..22d0f20 100644 --- a/net/rds/tcp_send.c +++ b/net/rds/tcp_send.c @@ -180,7 +180,7 @@ void rds_tcp_write_space(struct sock *sk) struct rds_connection *conn; struct rds_tcp_connection *tc; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); conn = sk->sk_user_data; if (!conn) { write_space = sk->sk_write_space; @@ -200,7 +200,7 @@ void rds_tcp_write_space(struct sock *sk) queue_delayed_work(rds_wq, &conn->c_send_w, 0); out: - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); /* * write_space is only called when data leaves tcp's send queue if -- cgit v1.1 From b91083a45e4c41b8c952cf02ceb0ce16f0b1b9b1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 May 2016 17:44:09 -0700 Subject: tipc: block BH in TCP callbacks TCP stack can now run from process context. Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous assumption. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Cc: Jon Maloy Cc: Ying Xue Signed-off-by: David S. Miller --- net/tipc/server.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/tipc/server.c b/net/tipc/server.c index 7a0af2d..272d20a 100644 --- a/net/tipc/server.c +++ b/net/tipc/server.c @@ -138,28 +138,28 @@ static void sock_data_ready(struct sock *sk) { struct tipc_conn *con; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); con = sock2con(sk); if (con && test_bit(CF_CONNECTED, &con->flags)) { conn_get(con); if (!queue_work(con->server->rcv_wq, &con->rwork)) conn_put(con); } - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); } static void sock_write_space(struct sock *sk) { struct tipc_conn *con; - read_lock(&sk->sk_callback_lock); + read_lock_bh(&sk->sk_callback_lock); con = sock2con(sk); if (con && test_bit(CF_CONNECTED, &con->flags)) { conn_get(con); if (!queue_work(con->server->send_wq, &con->swork)) conn_put(con); } - read_unlock(&sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); } static void tipc_register_callbacks(struct socket *sock, struct tipc_conn *con) -- cgit v1.1 From 6104503cddbbaf341c091fa900d93488d6342ad6 Mon Sep 17 00:00:00 2001 From: Amit Ghadge Date: Wed, 18 May 2016 06:46:30 +0530 Subject: net: Fix coding style warnings and errors. This is a patch to clean checkpatch warnings and errors in the Space.c file. Clean up the following warnings and errors. WARNING : * Block comments use * on subsequent lines * Missing a blank line after declarations * networking block comments don't use an empty /* line, use /* * please, no space before tabs * please, no spaces at the start of a line * line over 80 characters ERROR : * code indent should use tabs where possible * space prohibited after that open parenthesis '(' Signed-off-by: Amit Ghadge Signed-off-by: David S. Miller --- drivers/net/Space.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 67977f1..11fe712 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -35,8 +35,8 @@ #include /* A unified ethernet device probe. This is the easiest way to have every - ethernet adaptor have the name "eth[0123...]". - */ + * ethernet adaptor have the name "eth[0123...]". + */ struct devprobe2 { struct net_device *(*probe)(int unit); @@ -46,6 +46,7 @@ struct devprobe2 { static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) { struct net_device *dev; + for (; p->probe; p++) { if (autoprobe && p->status) continue; @@ -58,8 +59,7 @@ static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) return -ENODEV; } -/* - * ISA probes that touch addresses < 0x400 (including those that also +/* ISA probes that touch addresses < 0x400 (including those that also * look for EISA/PCI cards in addition to ISA cards). */ static struct devprobe2 isa_probes[] __initdata = { @@ -86,11 +86,11 @@ static struct devprobe2 isa_probes[] __initdata = { #endif #ifdef CONFIG_CS89x0 #ifndef CONFIG_CS89x0_PLATFORM - {cs89x0_probe, 0}, + {cs89x0_probe, 0}, #endif #endif -#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ - {i82596_probe, 0}, +#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */ + {i82596_probe, 0}, /* I82596 */ #endif #ifdef CONFIG_NI65 {ni65_probe, 0}, @@ -118,13 +118,12 @@ static struct devprobe2 m68k_probes[] __initdata = { {mac8390_probe, 0}, #endif #ifdef CONFIG_MAC89x0 - {mac89x0_probe, 0}, + {mac89x0_probe, 0}, #endif {NULL, 0}, }; -/* - * Unified ethernet device probe, segmented per architecture and +/* Unified ethernet device probe, segmented per architecture and * per bus interface. This drives the legacy devices only for now. */ @@ -135,7 +134,7 @@ static void __init ethif_probe2(int unit) if (base_addr == 1) return; - (void)( probe_list2(unit, m68k_probes, base_addr == 0) && + (void)(probe_list2(unit, m68k_probes, base_addr == 0) && probe_list2(unit, isa_probes, base_addr == 0)); } -- cgit v1.1 From 52103b70e13ae1381020b5a9fa15824a9b35baeb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 19 May 2016 22:56:48 -0700 Subject: Revert "net: pegasus: remove dead coding" This reverts commit e00be9e4d0ffcc0121606229f0aa4b246d6881d7. It causes warnings and has several problems. Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 1903d2e..36cd7f0 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -470,8 +470,61 @@ static void read_bulk_callback(struct urb *urb) return; default: netif_dbg(pegasus, rx_err, net, "RX status %d\n", status); + goto goon; } + if (!count || count < 4) + goto goon; + + rx_status = buf[count - 2]; + if (rx_status & 0x1e) { + netif_dbg(pegasus, rx_err, net, + "RX packet error %x\n", rx_status); + pegasus->stats.rx_errors++; + if (rx_status & 0x06) /* long or runt */ + pegasus->stats.rx_length_errors++; + if (rx_status & 0x08) + pegasus->stats.rx_crc_errors++; + if (rx_status & 0x10) /* extra bits */ + pegasus->stats.rx_frame_errors++; + goto goon; + } + if (pegasus->chip == 0x8513) { + pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer); + pkt_len &= 0x0fff; + pegasus->rx_skb->data += 2; + } else { + pkt_len = buf[count - 3] << 8; + pkt_len += buf[count - 4]; + pkt_len &= 0xfff; + pkt_len -= 4; + } + + /* + * If the packet is unreasonably long, quietly drop it rather than + * kernel panicing by calling skb_put. + */ + if (pkt_len > PEGASUS_MTU) + goto goon; + + /* + * at this point we are sure pegasus->rx_skb != NULL + * so we go ahead and pass up the packet. + */ + skb_put(pegasus->rx_skb, pkt_len); + pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net); + netif_rx(pegasus->rx_skb); + pegasus->stats.rx_packets++; + pegasus->stats.rx_bytes += pkt_len; + + if (pegasus->flags & PEGASUS_UNPLUG) + return; + + pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net, PEGASUS_MTU, + GFP_ATOMIC); + + if (pegasus->rx_skb == NULL) + goto tl_sched; goon: usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb, usb_rcvbulkpipe(pegasus->usb, 1), -- cgit v1.1 From 185be5aef1739fff0298f59b54f2ef7ccf5a849d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 18 May 2016 12:47:31 +0200 Subject: phy: fix crash in fixed_phy_add() Since e7f4dc3536a ("mdio: Move allocation of interrupts into core"), platforms which call fixed_phy_add() before fixed_mdio_bus_init() is called (for example, because the platform code and the fixed_phy driver use the same initcall level) crash in fixed_phy_add() since the ->mii_bus is not allocated. Also since e7f4dc3536a, these interrupts are initalized to polling by default. The few (old) platforms which directly use fixed_phy_add() from their platform code all pass PHY_POLL for the irq argument, so we can keep these platforms not crashing by simply not attempting to set the irq if PHY_POLL is passed. Also, even if problems have not been reported on more modern platforms which used fixed_phy_register() from drivers' probe functions, we return -EPROBE_DEFER if the MDIO bus is not yet registered so that the probe is retried later. Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Rabin Vincent Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 9050f21..2d2e433 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -255,7 +255,8 @@ int fixed_phy_add(unsigned int irq, int phy_addr, memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM); - fmb->mii_bus->irq[phy_addr] = irq; + if (irq != PHY_POLL) + fmb->mii_bus->irq[phy_addr] = irq; fp->addr = phy_addr; fp->status = *status; @@ -314,6 +315,9 @@ struct phy_device *fixed_phy_register(unsigned int irq, int phy_addr; int ret; + if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED) + return ERR_PTR(-EPROBE_DEFER); + /* Get the next available PHY address, up to PHY_MAX_ADDR */ spin_lock(&phy_fixed_addr_lock); if (phy_fixed_addr == PHY_MAX_ADDR) { -- cgit v1.1 From f86911e2de129fb3c8ca402c251138d12c4a9d37 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Wed, 18 May 2016 08:53:01 +0100 Subject: xen-netback: correct length checks on hash copy_ops The length checks on the grant table copy_ops for setting hash key and hash mapping are checking the local 'len' value which is correct in the case of the former but not the latter. This was picked up by static analysis checks. This patch replaces checks of 'len' with 'copy_op.len' in both cases to correct the incorrect check, keep the two checks consistent, and to make it clear what the checks are for. Signed-off-by: Paul Durrant Reported-by: Dan Carpenter Cc: Wei Liu Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/hash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netback/hash.c b/drivers/net/xen-netback/hash.c index 392e392..fb87cb3 100644 --- a/drivers/net/xen-netback/hash.c +++ b/drivers/net/xen-netback/hash.c @@ -311,7 +311,7 @@ u32 xenvif_set_hash_key(struct xenvif *vif, u32 gref, u32 len) if (len > XEN_NETBK_MAX_HASH_KEY_SIZE) return XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER; - if (len != 0) { + if (copy_op.len != 0) { gnttab_batch_copy(©_op, 1); if (copy_op.status != GNTST_okay) @@ -359,7 +359,7 @@ u32 xenvif_set_hash_mapping(struct xenvif *vif, u32 gref, u32 len, if (mapping[off++] >= vif->num_queues) return XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER; - if (len != 0) { + if (copy_op.len != 0) { gnttab_batch_copy(©_op, 1); if (copy_op.status != GNTST_okay) -- cgit v1.1 From 1968a0b8b6ca088bc029bd99ee696f1aca4090d0 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Wed, 18 May 2016 13:34:40 +0200 Subject: macsec: fix netlink attribute for key id In my last commit I replaced MACSEC_SA_ATTR_KEYID by MACSEC_SA_ATTR_KEY. Fixes: 8acca6acebd0 ("macsec: key identifier is 128 bits, not 64") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 460740c..47ee2c8 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1646,7 +1646,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info) if (tb_sa[MACSEC_SA_ATTR_ACTIVE]) rx_sa->active = !!nla_get_u8(tb_sa[MACSEC_SA_ATTR_ACTIVE]); - nla_memcpy(rx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEY], MACSEC_KEYID_LEN); + nla_memcpy(rx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEYID], MACSEC_KEYID_LEN); rx_sa->sc = rx_sc; rcu_assign_pointer(rx_sc->sa[assoc_num], rx_sa); @@ -1785,7 +1785,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; } - nla_memcpy(tx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEY], MACSEC_KEYID_LEN); + nla_memcpy(tx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEYID], MACSEC_KEYID_LEN); spin_lock_bh(&tx_sa->lock); tx_sa->next_pn = nla_get_u32(tb_sa[MACSEC_SA_ATTR_PN]); -- cgit v1.1 From 09ec8e7fb6bcb351bbded18a571ea037504bb3a6 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 18 May 2016 07:43:57 -0400 Subject: qede: Fix DMA address APIs usage Driver incorrectly uses dma_unmap_addr_set() to set a variable which is in truth a dma_addr_t [i.e not defined using DEFINE_DMA_UNMAP_ADDR()] and is being used by the driver flows other than unmapping physical addresses. This patch fixes driver fastpath where CONFIG_NEED_DMA_MAP_STATE is not set. Signed-off-by: Manish Chopra Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 8114541..901a9acc 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1076,8 +1076,7 @@ static void qede_tpa_start(struct qede_dev *edev, * start until its over and we don't want to risk allocation failing * here, so re-allocate when aggregation will be over. */ - dma_unmap_addr_set(sw_rx_data_prod, mapping, - dma_unmap_addr(replace_buf, mapping)); + sw_rx_data_prod->mapping = replace_buf->mapping; sw_rx_data_prod->data = replace_buf->data; rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(mapping)); @@ -2655,7 +2654,7 @@ static void qede_free_sge_mem(struct qede_dev *edev, if (replace_buf->data) { dma_unmap_page(&edev->pdev->dev, - dma_unmap_addr(replace_buf, mapping), + replace_buf->mapping, PAGE_SIZE, DMA_FROM_DEVICE); __free_page(replace_buf->data); } @@ -2755,7 +2754,7 @@ static int qede_alloc_sge_mem(struct qede_dev *edev, goto err; } - dma_unmap_addr_set(replace_buf, mapping, mapping); + replace_buf->mapping = mapping; tpa_info->replace_buf.page_offset = 0; tpa_info->replace_buf_mapping = mapping; -- cgit v1.1 From b7552e1bccbe3da9c8e7386c6188e8ea4667c8e7 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 18 May 2016 14:14:28 +0200 Subject: bpf: rather use get_random_int for randomizations Start address randomization and blinding in BPF currently use prandom_u32(). prandom_u32() values are not exposed to unpriviledged user space to my knowledge, but given other kernel facilities such as ASLR, stack canaries, etc make use of stronger get_random_int(), we better make use of it here as well given blinding requests successively new random values. get_random_int() has minimal entropy pool depletion, is not cryptographically secure, but doesn't need to be for our use cases here. Suggested-by: Hannes Frederic Sowa Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index f1e8a0d..b94a365 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -231,7 +231,7 @@ bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr, hdr->pages = size / PAGE_SIZE; hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)), PAGE_SIZE - sizeof(*hdr)); - start = (prandom_u32() % hole) & ~(alignment - 1); + start = (get_random_int() % hole) & ~(alignment - 1); /* Leave a random number of instructions before BPF code. */ *image_ptr = &hdr->image[start]; @@ -251,7 +251,7 @@ static int bpf_jit_blind_insn(const struct bpf_insn *from, struct bpf_insn *to_buff) { struct bpf_insn *to = to_buff; - u32 imm_rnd = prandom_u32(); + u32 imm_rnd = get_random_int(); s16 off; BUILD_BUG_ON(BPF_REG_AX + 1 != MAX_BPF_JIT_REG); -- cgit v1.1 From e6790fd861100a01838077b9b59bc339a80ee462 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 May 2016 16:21:07 +0200 Subject: mlx5: avoid unused variable warning When CONFIG_NET_CLS_ACT is disabled, we get a new warning in the mlx5 ethernet driver because the tc_for_each_action() loop never references the iterator: mellanox/mlx5/core/en_tc.c: In function 'mlx5e_stats_flower': mellanox/mlx5/core/en_tc.c:431:20: error: unused variable 'a' [-Werror=unused-variable] struct tc_action *a; This changes the dummy tc_for_each_action() macro by adding a cast to void, letting the compiler know that the variable is intentionally declared but not used here. I could not come up with a nicer workaround, but this seems to do the trick. Signed-off-by: Arnd Bergmann Fixes: aad7e08d39bd ("net/mlx5e: Hardware offloaded flower filter statistics support") Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Acked-By: Amir Vadai Signed-off-by: David S. Miller --- include/net/act_api.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/act_api.h b/include/net/act_api.h index 2cd9e9b..9a9a8ed 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -192,7 +192,7 @@ static inline void tcf_action_stats_update(struct tc_action *a, u64 bytes, #else /* CONFIG_NET_CLS_ACT */ #define tc_no_actions(_exts) true -#define tc_for_each_action(_a, _exts) while (0) +#define tc_for_each_action(_a, _exts) while ((void)(_a), 0) #define tcf_action_stats_update(a, bytes, packets, lastuse) #endif /* CONFIG_NET_CLS_ACT */ -- cgit v1.1 From c0fcded2e6879d817cec822b8513a2f6b6e4dfe9 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Wed, 18 May 2016 15:55:42 +0100 Subject: xen-netback: only deinitialized hash if it was initialized A domain with a frontend that does not implement a control ring has been seen to cause a crash during domain save. This was apparently because the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() is made regardless of whether a control ring was connected, and hence xenvif_hash_init() was called. This patch brings the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() inside the if clause that checks whether the control ring event channel was connected. This is sufficient to ensure it is only called if xenvif_init_hash() was called previously. Signed-off-by: Paul Durrant Reported-by: Boris Ostrovsky Tested-by: Boris Ostrovsky Cc: Wei Liu Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/interface.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 1c7f49b..83deeeb 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -780,9 +780,8 @@ void xenvif_disconnect_ctrl(struct xenvif *vif) vif->ctrl_task = NULL; } - xenvif_deinit_hash(vif); - if (vif->ctrl_irq) { + xenvif_deinit_hash(vif); unbind_from_irqhandler(vif->ctrl_irq, vif); vif->ctrl_irq = 0; } -- cgit v1.1 From 948350140ef060a42621de0de5c396807f7ec1fc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 18 May 2016 13:05:00 -0300 Subject: Revert "phy: add support for a reset-gpio specification" Commit da47b4572056 ("phy: add support for a reset-gpio specification") causes the following xtensa qemu crash according to Guenter Roeck: [ 9.366256] libphy: ethoc-mdio: probed [ 9.367389] (null): could not attach to PHY [ 9.368555] (null): failed to probe MDIO bus [ 9.371540] Unable to handle kernel paging request at virtual address 0000001c [ 9.371540] pc = d0320926, ra = 903209d1 [ 9.375358] Oops: sig: 11 [#1] This reverts commit da47b4572056487fd7941c26f73b3e8815ff712a. Reported-by: Guenter Roeck Signed-off-by: Fabio Estevam Acked-by: Florian Fainelli Tested-by: Guenter Roeck Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/phy.txt | 3 --- drivers/net/phy/phy_device.c | 8 -------- 2 files changed, 11 deletions(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index c00a9a8..bc1c3c8 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -35,8 +35,6 @@ Optional Properties: - broken-turn-around: If set, indicates the PHY device does not correctly release the turn around line low at the end of a MDIO transaction. -- reset-gpios: Reference to a GPIO used to reset the phy. - Example: ethernet-phy@0 { @@ -44,5 +42,4 @@ ethernet-phy@0 { interrupt-parent = <40000>; interrupts = <35 1>; reg = <0>; - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 307f72a..e977ba9 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -34,7 +34,6 @@ #include #include #include -#include #include @@ -1571,16 +1570,9 @@ static int phy_probe(struct device *dev) struct device_driver *drv = phydev->mdio.dev.driver; struct phy_driver *phydrv = to_phy_driver(drv); int err = 0; - struct gpio_descs *reset_gpios; phydev->drv = phydrv; - /* take phy out of reset */ - reset_gpios = devm_gpiod_get_array_optional(dev, "reset", - GPIOD_OUT_LOW); - if (IS_ERR(reset_gpios)) - return PTR_ERR(reset_gpios); - /* Disable the interrupt if the PHY doesn't support it * but the interrupt is still a valid one */ -- cgit v1.1 From 5c7cdf339af560f980b12eb6b0b5aa5f68ac6658 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:09 -0700 Subject: gso: Remove arbitrary checks for unsupported GSO In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 18 ------------------ net/ipv4/gre_offload.c | 14 -------------- net/ipv4/tcp_offload.c | 19 ------------------- net/ipv4/udp_offload.c | 10 ---------- net/ipv6/ip6_offload.c | 18 ------------------ net/ipv6/udp_offload.c | 13 ------------- net/mpls/mpls_gso.c | 11 +---------- 7 files changed, 1 insertion(+), 102 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 2e6e65f..7f08d45 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1205,24 +1205,6 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, int ihl; int id; - if (unlikely(skb_shinfo(skb)->gso_type & - ~(SKB_GSO_TCPV4 | - SKB_GSO_UDP | - SKB_GSO_DODGY | - SKB_GSO_TCP_ECN | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | - SKB_GSO_TCPV6 | - SKB_GSO_UDP_TUNNEL | - SKB_GSO_UDP_TUNNEL_CSUM | - SKB_GSO_TCP_FIXEDID | - SKB_GSO_TUNNEL_REMCSUM | - SKB_GSO_PARTIAL | - 0))) - goto out; - skb_reset_network_header(skb); nhoff = skb_network_header(skb) - skb_mac_header(skb); if (unlikely(!pskb_may_pull(skb, sizeof(*iph)))) diff --git a/net/ipv4/gre_offload.c b/net/ipv4/gre_offload.c index e88190a..ecd1e09 100644 --- a/net/ipv4/gre_offload.c +++ b/net/ipv4/gre_offload.c @@ -26,20 +26,6 @@ static struct sk_buff *gre_gso_segment(struct sk_buff *skb, int gre_offset, outer_hlen; bool need_csum, ufo; - if (unlikely(skb_shinfo(skb)->gso_type & - ~(SKB_GSO_TCPV4 | - SKB_GSO_TCPV6 | - SKB_GSO_UDP | - SKB_GSO_DODGY | - SKB_GSO_TCP_ECN | - SKB_GSO_TCP_FIXEDID | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | - SKB_GSO_PARTIAL))) - goto out; - if (!skb->encapsulation) goto out; diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c index 02737b6..5c59649 100644 --- a/net/ipv4/tcp_offload.c +++ b/net/ipv4/tcp_offload.c @@ -83,25 +83,6 @@ struct sk_buff *tcp_gso_segment(struct sk_buff *skb, if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) { /* Packet is from an untrusted source, reset gso_segs. */ - int type = skb_shinfo(skb)->gso_type; - - if (unlikely(type & - ~(SKB_GSO_TCPV4 | - SKB_GSO_DODGY | - SKB_GSO_TCP_ECN | - SKB_GSO_TCP_FIXEDID | - SKB_GSO_TCPV6 | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | - SKB_GSO_UDP_TUNNEL | - SKB_GSO_UDP_TUNNEL_CSUM | - SKB_GSO_TUNNEL_REMCSUM | - 0) || - !(type & (SKB_GSO_TCPV4 | - SKB_GSO_TCPV6)))) - goto out; skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss); diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index 6b7459c..81f253b 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -209,16 +209,6 @@ static struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) { /* Packet is from an untrusted source, reset gso_segs. */ - int type = skb_shinfo(skb)->gso_type; - - if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY | - SKB_GSO_UDP_TUNNEL | - SKB_GSO_UDP_TUNNEL_CSUM | - SKB_GSO_TUNNEL_REMCSUM | - SKB_GSO_IPIP | - SKB_GSO_GRE | SKB_GSO_GRE_CSUM) || - !(type & (SKB_GSO_UDP)))) - goto out; skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss); diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index f5eb184..9ad743b 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -69,24 +69,6 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, bool encap, udpfrag; int nhoff; - if (unlikely(skb_shinfo(skb)->gso_type & - ~(SKB_GSO_TCPV4 | - SKB_GSO_UDP | - SKB_GSO_DODGY | - SKB_GSO_TCP_ECN | - SKB_GSO_TCP_FIXEDID | - SKB_GSO_TCPV6 | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | - SKB_GSO_UDP_TUNNEL | - SKB_GSO_UDP_TUNNEL_CSUM | - SKB_GSO_TUNNEL_REMCSUM | - SKB_GSO_PARTIAL | - 0))) - goto out; - skb_reset_network_header(skb); nhoff = skb_network_header(skb) - skb_mac_header(skb); if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h)))) diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 5429f6b..ac858c4 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -36,19 +36,6 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) { /* Packet is from an untrusted source, reset gso_segs. */ - int type = skb_shinfo(skb)->gso_type; - - if (unlikely(type & ~(SKB_GSO_UDP | - SKB_GSO_DODGY | - SKB_GSO_UDP_TUNNEL | - SKB_GSO_UDP_TUNNEL_CSUM | - SKB_GSO_TUNNEL_REMCSUM | - SKB_GSO_GRE | - SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT) || - !(type & (SKB_GSO_UDP)))) - goto out; skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss); diff --git a/net/mpls/mpls_gso.c b/net/mpls/mpls_gso.c index bbcf604..2055e57 100644 --- a/net/mpls/mpls_gso.c +++ b/net/mpls/mpls_gso.c @@ -26,15 +26,6 @@ static struct sk_buff *mpls_gso_segment(struct sk_buff *skb, netdev_features_t mpls_features; __be16 mpls_protocol; - if (unlikely(skb_shinfo(skb)->gso_type & - ~(SKB_GSO_TCPV4 | - SKB_GSO_TCPV6 | - SKB_GSO_UDP | - SKB_GSO_DODGY | - SKB_GSO_TCP_FIXEDID | - SKB_GSO_TCP_ECN))) - goto out; - /* Setup inner SKB. */ mpls_protocol = skb->protocol; skb->protocol = skb->inner_protocol; @@ -57,7 +48,7 @@ static struct sk_buff *mpls_gso_segment(struct sk_buff *skb, * skb_mac_gso_segment(), an indirect caller of this function. */ __skb_pull(skb, skb->data - skb_mac_header(skb)); -out: + return segs; } -- cgit v1.1 From 7e13318daa4a67bff2f800923a993ef3818b3c53 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:10 -0700 Subject: net: define gso types for IPx over IPv4 and IPv6 This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 5 ++--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 ++--- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 +-- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 3 +-- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 3 +-- drivers/net/ethernet/intel/igb/igb_main.c | 3 +-- drivers/net/ethernet/intel/igbvf/netdev.c | 3 +-- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +-- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 3 +-- include/linux/netdev_features.h | 12 ++++++------ include/linux/netdevice.h | 4 ++-- include/linux/skbuff.h | 4 ++-- net/core/ethtool.c | 4 ++-- net/ipv4/af_inet.c | 2 +- net/ipv4/ipip.c | 2 +- net/ipv6/ip6_offload.c | 4 ++-- net/ipv6/sit.c | 4 ++-- net/netfilter/ipvs/ip_vs_xmit.c | 17 +++++++---------- 19 files changed, 37 insertions(+), 50 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d465bd7..0a5b770 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13259,12 +13259,11 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; if (!chip_is_e1x) { dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT; + NETIF_F_GSO_IPXIP4; dev->hw_enc_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | - NETIF_F_GSO_IPIP | - NETIF_F_GSO_SIT | + NETIF_F_GSO_IPXIP4 | NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5a0dca3..72a2eff 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6311,7 +6311,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_GRE | - NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT | + NETIF_F_GSO_IPXIP4 | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_PARTIAL | NETIF_F_RXHASH | NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO; @@ -6321,8 +6321,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_GRE_CSUM | - NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT | - NETIF_F_GSO_PARTIAL; + NETIF_F_GSO_IPXIP4 | NETIF_F_GSO_PARTIAL; dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_GRE_CSUM; dev->vlan_features = dev->hw_features | NETIF_F_HIGHDMA; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 1cd0ebf..242a1ff 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -9083,8 +9083,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) NETIF_F_TSO6 | NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | - NETIF_F_GSO_IPIP | - NETIF_F_GSO_SIT | + NETIF_F_GSO_IPXIP4 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_PARTIAL | diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 99a524d..0a8122c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2284,8 +2284,7 @@ static int i40e_tso(struct sk_buff *skb, u8 *hdr_len, u64 *cd_type_cmd_tso_mss) if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | + SKB_GSO_IPXIP4 | SKB_GSO_UDP_TUNNEL | SKB_GSO_UDP_TUNNEL_CSUM)) { if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index fd7dae46..2bbbbd0 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1559,8 +1559,7 @@ static int i40e_tso(struct sk_buff *skb, u8 *hdr_len, u64 *cd_type_cmd_tso_mss) if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | SKB_GSO_GRE_CSUM | - SKB_GSO_IPIP | - SKB_GSO_SIT | + SKB_GSO_IPXIP4 | SKB_GSO_UDP_TUNNEL | SKB_GSO_UDP_TUNNEL_CSUM)) { if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 642bb45..02d0a1c 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2230,8 +2230,7 @@ int i40evf_process_config(struct i40evf_adapter *adapter) NETIF_F_TSO6 | NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | - NETIF_F_GSO_IPIP | - NETIF_F_GSO_SIT | + NETIF_F_GSO_IPXIP4 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_PARTIAL | diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 2172769..b1a5cdb 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2418,8 +2418,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IGB_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ - NETIF_F_GSO_IPIP | \ - NETIF_F_GSO_SIT | \ + NETIF_F_GSO_IPXIP4 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 322a2d7..79b907f 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2763,8 +2763,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IGBVF_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ - NETIF_F_GSO_IPIP | \ - NETIF_F_GSO_SIT | \ + NETIF_F_GSO_IPXIP4 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9f3677c..69452c3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -9482,8 +9482,7 @@ skip_sriov: #define IXGBE_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ - NETIF_F_GSO_IPIP | \ - NETIF_F_GSO_SIT | \ + NETIF_F_GSO_IPXIP4 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 5e348b1..d86e511 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -4062,8 +4062,7 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IXGBEVF_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ - NETIF_F_GSO_IPIP | \ - NETIF_F_GSO_SIT | \ + NETIF_F_GSO_IPXIP4 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h index bc87362..aa7b240 100644 --- a/include/linux/netdev_features.h +++ b/include/linux/netdev_features.h @@ -44,8 +44,8 @@ enum { NETIF_F_FSO_BIT, /* ... FCoE segmentation */ NETIF_F_GSO_GRE_BIT, /* ... GRE with TSO */ NETIF_F_GSO_GRE_CSUM_BIT, /* ... GRE with csum with TSO */ - NETIF_F_GSO_IPIP_BIT, /* ... IPIP tunnel with TSO */ - NETIF_F_GSO_SIT_BIT, /* ... SIT tunnel with TSO */ + NETIF_F_GSO_IPXIP4_BIT, /* ... IP4 or IP6 over IP4 with TSO */ + NETIF_F_GSO_IPXIP6_BIT, /* ... IP4 or IP6 over IP6 with TSO */ NETIF_F_GSO_UDP_TUNNEL_BIT, /* ... UDP TUNNEL with TSO */ NETIF_F_GSO_UDP_TUNNEL_CSUM_BIT,/* ... UDP TUNNEL with TSO & CSUM */ NETIF_F_GSO_PARTIAL_BIT, /* ... Only segment inner-most L4 @@ -121,8 +121,8 @@ enum { #define NETIF_F_RXALL __NETIF_F(RXALL) #define NETIF_F_GSO_GRE __NETIF_F(GSO_GRE) #define NETIF_F_GSO_GRE_CSUM __NETIF_F(GSO_GRE_CSUM) -#define NETIF_F_GSO_IPIP __NETIF_F(GSO_IPIP) -#define NETIF_F_GSO_SIT __NETIF_F(GSO_SIT) +#define NETIF_F_GSO_IPXIP4 __NETIF_F(GSO_IPXIP4) +#define NETIF_F_GSO_IPXIP6 __NETIF_F(GSO_IPXIP6) #define NETIF_F_GSO_UDP_TUNNEL __NETIF_F(GSO_UDP_TUNNEL) #define NETIF_F_GSO_UDP_TUNNEL_CSUM __NETIF_F(GSO_UDP_TUNNEL_CSUM) #define NETIF_F_TSO_MANGLEID __NETIF_F(TSO_MANGLEID) @@ -200,8 +200,8 @@ enum { #define NETIF_F_GSO_ENCAP_ALL (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ - NETIF_F_GSO_IPIP | \ - NETIF_F_GSO_SIT | \ + NETIF_F_GSO_IPXIP4 | \ + NETIF_F_GSO_IPXIP6 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c148edf..f45929c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -4006,8 +4006,8 @@ static inline bool net_gso_ok(netdev_features_t features, int gso_type) BUILD_BUG_ON(SKB_GSO_FCOE != (NETIF_F_FSO >> NETIF_F_GSO_SHIFT)); BUILD_BUG_ON(SKB_GSO_GRE != (NETIF_F_GSO_GRE >> NETIF_F_GSO_SHIFT)); BUILD_BUG_ON(SKB_GSO_GRE_CSUM != (NETIF_F_GSO_GRE_CSUM >> NETIF_F_GSO_SHIFT)); - BUILD_BUG_ON(SKB_GSO_IPIP != (NETIF_F_GSO_IPIP >> NETIF_F_GSO_SHIFT)); - BUILD_BUG_ON(SKB_GSO_SIT != (NETIF_F_GSO_SIT >> NETIF_F_GSO_SHIFT)); + BUILD_BUG_ON(SKB_GSO_IPXIP4 != (NETIF_F_GSO_IPXIP4 >> NETIF_F_GSO_SHIFT)); + BUILD_BUG_ON(SKB_GSO_IPXIP6 != (NETIF_F_GSO_IPXIP6 >> NETIF_F_GSO_SHIFT)); BUILD_BUG_ON(SKB_GSO_UDP_TUNNEL != (NETIF_F_GSO_UDP_TUNNEL >> NETIF_F_GSO_SHIFT)); BUILD_BUG_ON(SKB_GSO_UDP_TUNNEL_CSUM != (NETIF_F_GSO_UDP_TUNNEL_CSUM >> NETIF_F_GSO_SHIFT)); BUILD_BUG_ON(SKB_GSO_PARTIAL != (NETIF_F_GSO_PARTIAL >> NETIF_F_GSO_SHIFT)); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c413c58..65968a9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -471,9 +471,9 @@ enum { SKB_GSO_GRE_CSUM = 1 << 8, - SKB_GSO_IPIP = 1 << 9, + SKB_GSO_IPXIP4 = 1 << 9, - SKB_GSO_SIT = 1 << 10, + SKB_GSO_IPXIP6 = 1 << 10, SKB_GSO_UDP_TUNNEL = 1 << 11, diff --git a/net/core/ethtool.c b/net/core/ethtool.c index bdb4013..f403481 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -84,8 +84,8 @@ static const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] [NETIF_F_FSO_BIT] = "tx-fcoe-segmentation", [NETIF_F_GSO_GRE_BIT] = "tx-gre-segmentation", [NETIF_F_GSO_GRE_CSUM_BIT] = "tx-gre-csum-segmentation", - [NETIF_F_GSO_IPIP_BIT] = "tx-ipip-segmentation", - [NETIF_F_GSO_SIT_BIT] = "tx-sit-segmentation", + [NETIF_F_GSO_IPXIP4_BIT] = "tx-ipxip4-segmentation", + [NETIF_F_GSO_IPXIP6_BIT] = "tx-ipxip6-segmentation", [NETIF_F_GSO_UDP_TUNNEL_BIT] = "tx-udp_tnl-segmentation", [NETIF_F_GSO_UDP_TUNNEL_CSUM_BIT] = "tx-udp_tnl-csum-segmentation", [NETIF_F_GSO_PARTIAL_BIT] = "tx-gso-partial", diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 7f08d45..25040b1 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1483,7 +1483,7 @@ out_unlock: static int ipip_gro_complete(struct sk_buff *skb, int nhoff) { skb->encapsulation = 1; - skb_shinfo(skb)->gso_type |= SKB_GSO_IPIP; + skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP4; return inet_gro_complete(skb, nhoff); } diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 9282748..9783701 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -219,7 +219,7 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(skb->protocol != htons(ETH_P_IP))) goto tx_error; - if (iptunnel_handle_offloads(skb, SKB_GSO_IPIP)) + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP4)) goto tx_error; skb_set_inner_ipproto(skb, IPPROTO_IPIP); diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 9ad743b..787e55f 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -86,7 +86,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, proto = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr); if (skb->encapsulation && - skb_shinfo(skb)->gso_type & (SKB_GSO_SIT|SKB_GSO_IPIP)) + skb_shinfo(skb)->gso_type & (SKB_GSO_IPXIP4 | SKB_GSO_IPXIP6)) udpfrag = proto == IPPROTO_UDP && encap; else udpfrag = proto == IPPROTO_UDP && !skb->encapsulation; @@ -294,7 +294,7 @@ out_unlock: static int sit_gro_complete(struct sk_buff *skb, int nhoff) { skb->encapsulation = 1; - skb_shinfo(skb)->gso_type |= SKB_GSO_SIT; + skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP4; return ipv6_gro_complete(skb, nhoff); } diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index a13d8c1..0a5a255 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -913,7 +913,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, goto tx_error; } - if (iptunnel_handle_offloads(skb, SKB_GSO_SIT)) { + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP4)) { ip_rt_put(rt); goto tx_error; } @@ -1000,7 +1000,7 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) struct ip_tunnel *tunnel = netdev_priv(dev); const struct iphdr *tiph = &tunnel->parms.iph; - if (iptunnel_handle_offloads(skb, SKB_GSO_IPIP)) + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP4)) goto tx_error; skb_set_inner_ipproto(skb, IPPROTO_IPIP); diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index 6d19d2e..01d3d89 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -932,17 +932,14 @@ error: static inline int __tun_gso_type_mask(int encaps_af, int orig_af) { - if (encaps_af == AF_INET) { - if (orig_af == AF_INET) - return SKB_GSO_IPIP; - - return SKB_GSO_SIT; + switch (encaps_af) { + case AF_INET: + return SKB_GSO_IPXIP4; + case AF_INET6: + return SKB_GSO_IPXIP6; + default: + return 0; } - - /* GSO: we need to provide proper SKB_GSO_ value for IPv6: - * SKB_GSO_SIT/IPV6 - */ - return 0; } /* -- cgit v1.1 From 4c64242a90a4932260d9ad32b12c745c466e2987 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:11 -0700 Subject: ipv6: Fix nexthdr for reinjection In ip6_input_finish the nexthdr protocol is retrieved from the next header offset that is returned in the cb of the skb. This method does not work for UDP encapsulation that may not even have a concept of a nexthdr field (e.g. FOU). This patch checks for a final protocol (INET6_PROTO_FINAL) when a protocol handler returns > 0. If the protocol is not final then resubmission is performed on nhoff value. If the protocol is final then the nexthdr is taken to be the return value. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index f185cbc..d35dff2 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -236,6 +236,7 @@ resubmit: nhoff = IP6CB(skb)->nhoff; nexthdr = skb_network_header(skb)[nhoff]; +resubmit_final: raw = raw6_local_deliver(skb, nexthdr); ipprot = rcu_dereference(inet6_protos[nexthdr]); if (ipprot) { @@ -263,10 +264,21 @@ resubmit: goto discard; ret = ipprot->handler(skb); - if (ret > 0) - goto resubmit; - else if (ret == 0) + if (ret > 0) { + if (ipprot->flags & INET6_PROTO_FINAL) { + /* Not an extension header, most likely UDP + * encapsulation. Use return value as nexthdr + * protocol not nhoff (which presumably is + * not set by handler). + */ + nexthdr = ret; + goto resubmit_final; + } else { + goto resubmit; + } + } else if (ret == 0) { __IP6_INC_STATS(net, idev, IPSTATS_MIB_INDELIVERS); + } } else { if (!raw) { if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) { -- cgit v1.1 From 1da44f9c15e6389d45e034d5fd0b937e2928b412 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:12 -0700 Subject: ipv6: Change "final" protocol processing for encapsulation When performing foo-over-UDP, UDP packets are processed by the encapsulation handler which returns another protocol to process. This may result in processing two (or more) protocols in the loop that are marked as INET6_PROTO_FINAL. The actions taken for hitting a final protocol, in particular the skb_postpull_rcsum can only be performed once. This patch set adds a check of a final protocol has been seen. The rules are: - If the final protocol has not been seen any protocol is processed (final and non-final). In the case of a final protocol, the final actions are taken (like the skb_postpull_rcsum) - If a final protocol has been seen (e.g. an encapsulating UDP header) then no further non-final protocols are allowed (e.g. extension headers). For more final protocols the final actions are not taken (e.g. skb_postpull_rcsum). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index d35dff2..94611e4 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -223,6 +223,7 @@ static int ip6_input_finish(struct net *net, struct sock *sk, struct sk_buff *sk unsigned int nhoff; int nexthdr; bool raw; + bool have_final = false; /* * Parse extension headers @@ -242,9 +243,21 @@ resubmit_final: if (ipprot) { int ret; - if (ipprot->flags & INET6_PROTO_FINAL) { + if (have_final) { + if (!(ipprot->flags & INET6_PROTO_FINAL)) { + /* Once we've seen a final protocol don't + * allow encapsulation on any non-final + * ones. This allows foo in UDP encapsulation + * to work. + */ + goto discard; + } + } else if (ipprot->flags & INET6_PROTO_FINAL) { const struct ipv6hdr *hdr; + /* Only do this once for first final protocol */ + have_final = true; + /* Free reference early: we don't need it any more, and it may hold ip_conntrack module loaded indefinitely. */ -- cgit v1.1 From 55c2bc1432241e7be39b11339bd00e85f878ebd6 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:13 -0700 Subject: net: Cleanup encap items in ip_tunnels.h Consolidate all the ip_tunnel_encap definitions in one spot in the header file. Also, move ip_encap_hlen and ip_tunnel_encap from ip_tunnel.c to ip_tunnels.h so they call be called without a dependency on ip_tunnel module. Similarly, move iptun_encaps to ip_tunnel_core.c. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/net/ip_tunnels.h | 76 ++++++++++++++++++++++++++++++++++++----------- net/ipv4/ip_tunnel.c | 45 ---------------------------- net/ipv4/ip_tunnel_core.c | 4 +++ 3 files changed, 62 insertions(+), 63 deletions(-) diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index d916b43..dbf4444 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -171,22 +171,6 @@ struct ip_tunnel_net { struct ip_tunnel __rcu *collect_md_tun; }; -struct ip_tunnel_encap_ops { - size_t (*encap_hlen)(struct ip_tunnel_encap *e); - int (*build_header)(struct sk_buff *skb, struct ip_tunnel_encap *e, - u8 *protocol, struct flowi4 *fl4); -}; - -#define MAX_IPTUN_ENCAP_OPS 8 - -extern const struct ip_tunnel_encap_ops __rcu * - iptun_encaps[MAX_IPTUN_ENCAP_OPS]; - -int ip_tunnel_encap_add_ops(const struct ip_tunnel_encap_ops *op, - unsigned int num); -int ip_tunnel_encap_del_ops(const struct ip_tunnel_encap_ops *op, - unsigned int num); - static inline void ip_tunnel_key_init(struct ip_tunnel_key *key, __be32 saddr, __be32 daddr, u8 tos, u8 ttl, __be32 label, @@ -251,8 +235,6 @@ void ip_tunnel_delete_net(struct ip_tunnel_net *itn, struct rtnl_link_ops *ops); void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params, const u8 protocol); int ip_tunnel_ioctl(struct net_device *dev, struct ip_tunnel_parm *p, int cmd); -int ip_tunnel_encap(struct sk_buff *skb, struct ip_tunnel *t, - u8 *protocol, struct flowi4 *fl4); int __ip_tunnel_change_mtu(struct net_device *dev, int new_mtu, bool strict); int ip_tunnel_change_mtu(struct net_device *dev, int new_mtu); @@ -271,9 +253,67 @@ int ip_tunnel_changelink(struct net_device *dev, struct nlattr *tb[], int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[], struct ip_tunnel_parm *p); void ip_tunnel_setup(struct net_device *dev, int net_id); + +struct ip_tunnel_encap_ops { + size_t (*encap_hlen)(struct ip_tunnel_encap *e); + int (*build_header)(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, struct flowi4 *fl4); +}; + +#define MAX_IPTUN_ENCAP_OPS 8 + +extern const struct ip_tunnel_encap_ops __rcu * + iptun_encaps[MAX_IPTUN_ENCAP_OPS]; + +int ip_tunnel_encap_add_ops(const struct ip_tunnel_encap_ops *op, + unsigned int num); +int ip_tunnel_encap_del_ops(const struct ip_tunnel_encap_ops *op, + unsigned int num); + int ip_tunnel_encap_setup(struct ip_tunnel *t, struct ip_tunnel_encap *ipencap); +static inline int ip_encap_hlen(struct ip_tunnel_encap *e) +{ + const struct ip_tunnel_encap_ops *ops; + int hlen = -EINVAL; + + if (e->type == TUNNEL_ENCAP_NONE) + return 0; + + if (e->type >= MAX_IPTUN_ENCAP_OPS) + return -EINVAL; + + rcu_read_lock(); + ops = rcu_dereference(iptun_encaps[e->type]); + if (likely(ops && ops->encap_hlen)) + hlen = ops->encap_hlen(e); + rcu_read_unlock(); + + return hlen; +} + +static inline int ip_tunnel_encap(struct sk_buff *skb, struct ip_tunnel *t, + u8 *protocol, struct flowi4 *fl4) +{ + const struct ip_tunnel_encap_ops *ops; + int ret = -EINVAL; + + if (t->encap.type == TUNNEL_ENCAP_NONE) + return 0; + + if (t->encap.type >= MAX_IPTUN_ENCAP_OPS) + return -EINVAL; + + rcu_read_lock(); + ops = rcu_dereference(iptun_encaps[t->encap.type]); + if (likely(ops && ops->build_header)) + ret = ops->build_header(skb, &t->encap, protocol, fl4); + rcu_read_unlock(); + + return ret; +} + /* Extract dsfield from inner protocol */ static inline u8 ip_tunnel_get_dsfield(const struct iphdr *iph, const struct sk_buff *skb) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index a69ed94..d8f5e0a 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -443,29 +443,6 @@ drop: } EXPORT_SYMBOL_GPL(ip_tunnel_rcv); -static int ip_encap_hlen(struct ip_tunnel_encap *e) -{ - const struct ip_tunnel_encap_ops *ops; - int hlen = -EINVAL; - - if (e->type == TUNNEL_ENCAP_NONE) - return 0; - - if (e->type >= MAX_IPTUN_ENCAP_OPS) - return -EINVAL; - - rcu_read_lock(); - ops = rcu_dereference(iptun_encaps[e->type]); - if (likely(ops && ops->encap_hlen)) - hlen = ops->encap_hlen(e); - rcu_read_unlock(); - - return hlen; -} - -const struct ip_tunnel_encap_ops __rcu * - iptun_encaps[MAX_IPTUN_ENCAP_OPS] __read_mostly; - int ip_tunnel_encap_add_ops(const struct ip_tunnel_encap_ops *ops, unsigned int num) { @@ -519,28 +496,6 @@ int ip_tunnel_encap_setup(struct ip_tunnel *t, } EXPORT_SYMBOL_GPL(ip_tunnel_encap_setup); -int ip_tunnel_encap(struct sk_buff *skb, struct ip_tunnel *t, - u8 *protocol, struct flowi4 *fl4) -{ - const struct ip_tunnel_encap_ops *ops; - int ret = -EINVAL; - - if (t->encap.type == TUNNEL_ENCAP_NONE) - return 0; - - if (t->encap.type >= MAX_IPTUN_ENCAP_OPS) - return -EINVAL; - - rcu_read_lock(); - ops = rcu_dereference(iptun_encaps[t->encap.type]); - if (likely(ops && ops->build_header)) - ret = ops->build_header(skb, &t->encap, protocol, fl4); - rcu_read_unlock(); - - return ret; -} -EXPORT_SYMBOL(ip_tunnel_encap); - static int tnl_update_pmtu(struct net_device *dev, struct sk_buff *skb, struct rtable *rt, __be16 df, const struct iphdr *inner_iph) diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index 9118b0e..cc66a20 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -47,6 +47,10 @@ #include #include +const struct ip_tunnel_encap_ops __rcu * + iptun_encaps[MAX_IPTUN_ENCAP_OPS] __read_mostly; +EXPORT_SYMBOL(iptun_encaps); + void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, __be32 src, __be32 dst, __u8 proto, __u8 tos, __u8 ttl, __be16 df, bool xnet) -- cgit v1.1 From 440924bbc0e11fb429ccc25f6d9597d5a7a02296 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:14 -0700 Subject: fou: Call setup_udp_tunnel_sock Use helper function to set up UDP tunnel related information for a fou socket. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv4/fou.c | 50 ++++++++++++++++---------------------------------- 1 file changed, 16 insertions(+), 34 deletions(-) diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index eeec7d6..6cbc725 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -448,31 +448,13 @@ static void fou_release(struct fou *fou) kfree_rcu(fou, rcu); } -static int fou_encap_init(struct sock *sk, struct fou *fou, struct fou_cfg *cfg) -{ - udp_sk(sk)->encap_rcv = fou_udp_recv; - udp_sk(sk)->gro_receive = fou_gro_receive; - udp_sk(sk)->gro_complete = fou_gro_complete; - fou_from_sock(sk)->protocol = cfg->protocol; - - return 0; -} - -static int gue_encap_init(struct sock *sk, struct fou *fou, struct fou_cfg *cfg) -{ - udp_sk(sk)->encap_rcv = gue_udp_recv; - udp_sk(sk)->gro_receive = gue_gro_receive; - udp_sk(sk)->gro_complete = gue_gro_complete; - - return 0; -} - static int fou_create(struct net *net, struct fou_cfg *cfg, struct socket **sockp) { struct socket *sock = NULL; struct fou *fou = NULL; struct sock *sk; + struct udp_tunnel_sock_cfg tunnel_cfg; int err; /* Open UDP socket */ @@ -491,33 +473,33 @@ static int fou_create(struct net *net, struct fou_cfg *cfg, fou->flags = cfg->flags; fou->port = cfg->udp_config.local_udp_port; + fou->type = cfg->type; + fou->sock = sock; + + memset(&tunnel_cfg, 0, sizeof(tunnel_cfg)); + tunnel_cfg.encap_type = 1; + tunnel_cfg.sk_user_data = fou; + tunnel_cfg.encap_destroy = NULL; /* Initial for fou type */ switch (cfg->type) { case FOU_ENCAP_DIRECT: - err = fou_encap_init(sk, fou, cfg); - if (err) - goto error; + tunnel_cfg.encap_rcv = fou_udp_recv; + tunnel_cfg.gro_receive = fou_gro_receive; + tunnel_cfg.gro_complete = fou_gro_complete; + fou->protocol = cfg->protocol; break; case FOU_ENCAP_GUE: - err = gue_encap_init(sk, fou, cfg); - if (err) - goto error; + tunnel_cfg.encap_rcv = gue_udp_recv; + tunnel_cfg.gro_receive = gue_gro_receive; + tunnel_cfg.gro_complete = gue_gro_complete; break; default: err = -EINVAL; goto error; } - fou->type = cfg->type; - - udp_sk(sk)->encap_type = 1; - udp_encap_enable(); - - sk->sk_user_data = fou; - fou->sock = sock; - - inet_inc_convert_csum(sk); + setup_udp_tunnel_sock(net, sock, &tunnel_cfg); sk->sk_allocation = GFP_ATOMIC; -- cgit v1.1 From dc969b81ebb37d6ec3d7659763bf017ee03f3ac1 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:15 -0700 Subject: fou: Split out {fou,gue}_build_header Create __fou_build_header and __gue_build_header. These implement the protocol generic parts of building the fou and gue header. fou_build_header and gue_build_header implement the IPv4 specific functions and call the __*_build_header functions. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/net/fou.h | 8 ++++---- net/ipv4/fou.c | 47 +++++++++++++++++++++++++++++++++++++---------- 2 files changed, 41 insertions(+), 14 deletions(-) diff --git a/include/net/fou.h b/include/net/fou.h index 19b8a0c..7d2fda2 100644 --- a/include/net/fou.h +++ b/include/net/fou.h @@ -11,9 +11,9 @@ size_t fou_encap_hlen(struct ip_tunnel_encap *e); static size_t gue_encap_hlen(struct ip_tunnel_encap *e); -int fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, - u8 *protocol, struct flowi4 *fl4); -int gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, - u8 *protocol, struct flowi4 *fl4); +int __fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, __be16 *sport, int type); +int __gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, __be16 *sport, int type); #endif diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index 6cbc725..f4f2ddd 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -780,6 +780,22 @@ static void fou_build_udp(struct sk_buff *skb, struct ip_tunnel_encap *e, *protocol = IPPROTO_UDP; } +int __fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, __be16 *sport, int type) +{ + int err; + + err = iptunnel_handle_offloads(skb, type); + if (err) + return err; + + *sport = e->sport ? : udp_flow_src_port(dev_net(skb->dev), + skb, 0, 0, false); + + return 0; +} +EXPORT_SYMBOL(__fou_build_header); + int fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, u8 *protocol, struct flowi4 *fl4) { @@ -788,26 +804,21 @@ int fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, __be16 sport; int err; - err = iptunnel_handle_offloads(skb, type); + err = __fou_build_header(skb, e, protocol, &sport, type); if (err) return err; - sport = e->sport ? : udp_flow_src_port(dev_net(skb->dev), - skb, 0, 0, false); fou_build_udp(skb, e, fl4, protocol, sport); return 0; } EXPORT_SYMBOL(fou_build_header); -int gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, - u8 *protocol, struct flowi4 *fl4) +int __gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, __be16 *sport, int type) { - int type = e->flags & TUNNEL_ENCAP_FLAG_CSUM ? SKB_GSO_UDP_TUNNEL_CSUM : - SKB_GSO_UDP_TUNNEL; struct guehdr *guehdr; size_t hdrlen, optlen = 0; - __be16 sport; void *data; bool need_priv = false; int err; @@ -826,8 +837,8 @@ int gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, return err; /* Get source port (based on flow hash) before skb_push */ - sport = e->sport ? : udp_flow_src_port(dev_net(skb->dev), - skb, 0, 0, false); + *sport = e->sport ? : udp_flow_src_port(dev_net(skb->dev), + skb, 0, 0, false); hdrlen = sizeof(struct guehdr) + optlen; @@ -872,6 +883,22 @@ int gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, } + return 0; +} +EXPORT_SYMBOL(__gue_build_header); + +int gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, struct flowi4 *fl4) +{ + int type = e->flags & TUNNEL_ENCAP_FLAG_CSUM ? SKB_GSO_UDP_TUNNEL_CSUM : + SKB_GSO_UDP_TUNNEL; + __be16 sport; + int err; + + err = __gue_build_header(skb, e, protocol, &sport, type); + if (err) + return err; + fou_build_udp(skb, e, fl4, protocol, sport); return 0; -- cgit v1.1 From 5f914b681253966612e052df364c3b8e4a3d5f63 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:16 -0700 Subject: fou: Support IPv6 in fou This patch adds receive path support for IPv6 with fou. - Add address family to fou structure for open sockets. This supports AF_INET and AF_INET6. Lookups for fou ports are performed on both the port number and family. - In fou and gue receive adjust tot_len in IPv4 header or payload_len based on address family. - Allow AF_INET6 in FOU_ATTR_AF netlink attribute. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv4/fou.c | 47 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 12 deletions(-) diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index f4f2ddd..5f9207c 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -21,6 +21,7 @@ struct fou { u8 protocol; u8 flags; __be16 port; + u8 family; u16 type; struct list_head list; struct rcu_head rcu; @@ -47,14 +48,17 @@ static inline struct fou *fou_from_sock(struct sock *sk) return sk->sk_user_data; } -static int fou_recv_pull(struct sk_buff *skb, size_t len) +static int fou_recv_pull(struct sk_buff *skb, struct fou *fou, size_t len) { - struct iphdr *iph = ip_hdr(skb); - /* Remove 'len' bytes from the packet (UDP header and * FOU header if present). */ - iph->tot_len = htons(ntohs(iph->tot_len) - len); + if (fou->family == AF_INET) + ip_hdr(skb)->tot_len = htons(ntohs(ip_hdr(skb)->tot_len) - len); + else + ipv6_hdr(skb)->payload_len = + htons(ntohs(ipv6_hdr(skb)->payload_len) - len); + __skb_pull(skb, len); skb_postpull_rcsum(skb, udp_hdr(skb), len); skb_reset_transport_header(skb); @@ -68,7 +72,7 @@ static int fou_udp_recv(struct sock *sk, struct sk_buff *skb) if (!fou) return 1; - if (fou_recv_pull(skb, sizeof(struct udphdr))) + if (fou_recv_pull(skb, fou, sizeof(struct udphdr))) goto drop; return -fou->protocol; @@ -141,7 +145,11 @@ static int gue_udp_recv(struct sock *sk, struct sk_buff *skb) hdrlen = sizeof(struct guehdr) + optlen; - ip_hdr(skb)->tot_len = htons(ntohs(ip_hdr(skb)->tot_len) - len); + if (fou->family == AF_INET) + ip_hdr(skb)->tot_len = htons(ntohs(ip_hdr(skb)->tot_len) - len); + else + ipv6_hdr(skb)->payload_len = + htons(ntohs(ipv6_hdr(skb)->payload_len) - len); /* Pull csum through the guehdr now . This can be used if * there is a remote checksum offload. @@ -426,7 +434,8 @@ static int fou_add_to_port_list(struct net *net, struct fou *fou) mutex_lock(&fn->fou_lock); list_for_each_entry(fout, &fn->fou_list, list) { - if (fou->port == fout->port) { + if (fou->port == fout->port && + fou->family == fout->family) { mutex_unlock(&fn->fou_lock); return -EALREADY; } @@ -471,8 +480,9 @@ static int fou_create(struct net *net, struct fou_cfg *cfg, sk = sock->sk; - fou->flags = cfg->flags; fou->port = cfg->udp_config.local_udp_port; + fou->family = cfg->udp_config.family; + fou->flags = cfg->flags; fou->type = cfg->type; fou->sock = sock; @@ -524,12 +534,13 @@ static int fou_destroy(struct net *net, struct fou_cfg *cfg) { struct fou_net *fn = net_generic(net, fou_net_id); __be16 port = cfg->udp_config.local_udp_port; + u8 family = cfg->udp_config.family; int err = -EINVAL; struct fou *fou; mutex_lock(&fn->fou_lock); list_for_each_entry(fou, &fn->fou_list, list) { - if (fou->port == port) { + if (fou->port == port && fou->family == family) { fou_release(fou); err = 0; break; @@ -567,8 +578,15 @@ static int parse_nl_config(struct genl_info *info, if (info->attrs[FOU_ATTR_AF]) { u8 family = nla_get_u8(info->attrs[FOU_ATTR_AF]); - if (family != AF_INET) - return -EINVAL; + switch (family) { + case AF_INET: + break; + case AF_INET6: + cfg->udp_config.ipv6_v6only = 1; + break; + default: + return -EAFNOSUPPORT; + } cfg->udp_config.family = family; } @@ -659,6 +677,7 @@ static int fou_nl_cmd_get_port(struct sk_buff *skb, struct genl_info *info) struct fou_cfg cfg; struct fou *fout; __be16 port; + u8 family; int ret; ret = parse_nl_config(info, &cfg); @@ -668,6 +687,10 @@ static int fou_nl_cmd_get_port(struct sk_buff *skb, struct genl_info *info) if (port == 0) return -EINVAL; + family = cfg.udp_config.family; + if (family != AF_INET && family != AF_INET6) + return -EINVAL; + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) return -ENOMEM; @@ -675,7 +698,7 @@ static int fou_nl_cmd_get_port(struct sk_buff *skb, struct genl_info *info) ret = -ESRCH; mutex_lock(&fn->fou_lock); list_for_each_entry(fout, &fn->fou_list, list) { - if (port == fout->port) { + if (port == fout->port && family == fout->family) { ret = fou_dump_info(fout, info->snd_portid, info->snd_seq, 0, msg, info->genlhdr->cmd); -- cgit v1.1 From 058214a4d1dfefed9f01a277fadd3590acb5f990 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:17 -0700 Subject: ip6_tun: Add infrastructure for doing encapsulation Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions for getting encap hlen, setting up encap on a tunnel, performing encapsulation operation. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 58 +++++++++++++++++++++++++++++ net/ipv4/ip_tunnel_core.c | 5 +++ net/ipv6/ip6_tunnel.c | 94 ++++++++++++++++++++++++++++++++++++++++------- 3 files changed, 144 insertions(+), 13 deletions(-) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index fb9e015..d325c81 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -52,10 +52,68 @@ struct ip6_tnl { __u32 o_seqno; /* The last output seqno */ int hlen; /* tun_hlen + encap_hlen */ int tun_hlen; /* Precalculated header length */ + int encap_hlen; /* Encap header length (FOU,GUE) */ + struct ip_tunnel_encap encap; int mlink; +}; +struct ip6_tnl_encap_ops { + size_t (*encap_hlen)(struct ip_tunnel_encap *e); + int (*build_header)(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, struct flowi6 *fl6); }; +extern const struct ip6_tnl_encap_ops __rcu * + ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; + +int ip6_tnl_encap_add_ops(const struct ip6_tnl_encap_ops *ops, + unsigned int num); +int ip6_tnl_encap_del_ops(const struct ip6_tnl_encap_ops *ops, + unsigned int num); +int ip6_tnl_encap_setup(struct ip6_tnl *t, + struct ip_tunnel_encap *ipencap); + +static inline int ip6_encap_hlen(struct ip_tunnel_encap *e) +{ + const struct ip6_tnl_encap_ops *ops; + int hlen = -EINVAL; + + if (e->type == TUNNEL_ENCAP_NONE) + return 0; + + if (e->type >= MAX_IPTUN_ENCAP_OPS) + return -EINVAL; + + rcu_read_lock(); + ops = rcu_dereference(ip6tun_encaps[e->type]); + if (likely(ops && ops->encap_hlen)) + hlen = ops->encap_hlen(e); + rcu_read_unlock(); + + return hlen; +} + +static inline int ip6_tnl_encap(struct sk_buff *skb, struct ip6_tnl *t, + u8 *protocol, struct flowi6 *fl6) +{ + const struct ip6_tnl_encap_ops *ops; + int ret = -EINVAL; + + if (t->encap.type == TUNNEL_ENCAP_NONE) + return 0; + + if (t->encap.type >= MAX_IPTUN_ENCAP_OPS) + return -EINVAL; + + rcu_read_lock(); + ops = rcu_dereference(ip6tun_encaps[t->encap.type]); + if (likely(ops && ops->build_header)) + ret = ops->build_header(skb, &t->encap, protocol, fl6); + rcu_read_unlock(); + + return ret; +} + /* Tunnel encapsulation limit destination sub-option */ struct ipv6_tlv_tnl_enc_lim { diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index cc66a20..afd6b59 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -51,6 +52,10 @@ const struct ip_tunnel_encap_ops __rcu * iptun_encaps[MAX_IPTUN_ENCAP_OPS] __read_mostly; EXPORT_SYMBOL(iptun_encaps); +const struct ip6_tnl_encap_ops __rcu * + ip6tun_encaps[MAX_IPTUN_ENCAP_OPS] __read_mostly; +EXPORT_SYMBOL(ip6tun_encaps); + void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, __be32 src, __be32 dst, __u8 proto, __u8 tos, __u8 ttl, __be16 df, bool xnet) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index e79330f..64ddbeac 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1010,7 +1010,8 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, struct dst_entry *dst = NULL, *ndst = NULL; struct net_device *tdev; int mtu; - unsigned int max_headroom = sizeof(struct ipv6hdr); + unsigned int psh_hlen = sizeof(struct ipv6hdr) + t->encap_hlen; + unsigned int max_headroom = psh_hlen; int err = -1; /* NBMA tunnel */ @@ -1063,7 +1064,7 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, t->parms.name); goto tx_err_dst_release; } - mtu = dst_mtu(dst) - sizeof(*ipv6h); + mtu = dst_mtu(dst) - psh_hlen; if (encap_limit >= 0) { max_headroom += 8; mtu -= 8; @@ -1124,11 +1125,18 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, skb->encapsulation = 1; } + /* Calculate max headroom for all the headers and adjust + * needed_headroom if necessary. + */ max_headroom = LL_RESERVED_SPACE(dst->dev) + sizeof(struct ipv6hdr) - + dst->header_len; + + dst->header_len + t->hlen; if (max_headroom > dev->needed_headroom) dev->needed_headroom = max_headroom; + err = ip6_tnl_encap(skb, t, &proto, fl6); + if (err) + return err; + skb_push(skb, sizeof(struct ipv6hdr)); skb_reset_network_header(skb); ipv6h = ipv6_hdr(skb); @@ -1280,6 +1288,7 @@ static void ip6_tnl_link_config(struct ip6_tnl *t) struct net_device *dev = t->dev; struct __ip6_tnl_parm *p = &t->parms; struct flowi6 *fl6 = &t->fl.u.ip6; + int t_hlen; memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr)); memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr)); @@ -1303,6 +1312,10 @@ static void ip6_tnl_link_config(struct ip6_tnl *t) else dev->flags &= ~IFF_POINTOPOINT; + t->tun_hlen = 0; + t->hlen = t->encap_hlen + t->tun_hlen; + t_hlen = t->hlen + sizeof(struct ipv6hdr); + if (p->flags & IP6_TNL_F_CAP_XMIT) { int strict = (ipv6_addr_type(&p->raddr) & (IPV6_ADDR_MULTICAST|IPV6_ADDR_LINKLOCAL)); @@ -1316,9 +1329,9 @@ static void ip6_tnl_link_config(struct ip6_tnl *t) if (rt->dst.dev) { dev->hard_header_len = rt->dst.dev->hard_header_len + - sizeof(struct ipv6hdr); + t_hlen; - dev->mtu = rt->dst.dev->mtu - sizeof(struct ipv6hdr); + dev->mtu = rt->dst.dev->mtu - t_hlen; if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) dev->mtu -= 8; @@ -1564,6 +1577,59 @@ int ip6_tnl_get_iflink(const struct net_device *dev) } EXPORT_SYMBOL(ip6_tnl_get_iflink); +int ip6_tnl_encap_add_ops(const struct ip6_tnl_encap_ops *ops, + unsigned int num) +{ + if (num >= MAX_IPTUN_ENCAP_OPS) + return -ERANGE; + + return !cmpxchg((const struct ip6_tnl_encap_ops **) + &ip6tun_encaps[num], + NULL, ops) ? 0 : -1; +} +EXPORT_SYMBOL(ip6_tnl_encap_add_ops); + +int ip6_tnl_encap_del_ops(const struct ip6_tnl_encap_ops *ops, + unsigned int num) +{ + int ret; + + if (num >= MAX_IPTUN_ENCAP_OPS) + return -ERANGE; + + ret = (cmpxchg((const struct ip6_tnl_encap_ops **) + &ip6tun_encaps[num], + ops, NULL) == ops) ? 0 : -1; + + synchronize_net(); + + return ret; +} +EXPORT_SYMBOL(ip6_tnl_encap_del_ops); + +int ip6_tnl_encap_setup(struct ip6_tnl *t, + struct ip_tunnel_encap *ipencap) +{ + int hlen; + + memset(&t->encap, 0, sizeof(t->encap)); + + hlen = ip6_encap_hlen(ipencap); + if (hlen < 0) + return hlen; + + t->encap.type = ipencap->type; + t->encap.sport = ipencap->sport; + t->encap.dport = ipencap->dport; + t->encap.flags = ipencap->flags; + + t->encap_hlen = hlen; + t->hlen = t->encap_hlen + t->tun_hlen; + + return 0; +} +EXPORT_SYMBOL_GPL(ip6_tnl_encap_setup); + static const struct net_device_ops ip6_tnl_netdev_ops = { .ndo_init = ip6_tnl_dev_init, .ndo_uninit = ip6_tnl_dev_uninit, @@ -1585,19 +1651,13 @@ static const struct net_device_ops ip6_tnl_netdev_ops = { static void ip6_tnl_dev_setup(struct net_device *dev) { - struct ip6_tnl *t; - dev->netdev_ops = &ip6_tnl_netdev_ops; dev->destructor = ip6_dev_free; dev->type = ARPHRD_TUNNEL6; - dev->hard_header_len = LL_MAX_HEADER + sizeof(struct ipv6hdr); - dev->mtu = ETH_DATA_LEN - sizeof(struct ipv6hdr); - t = netdev_priv(dev); - if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) - dev->mtu -= 8; dev->flags |= IFF_NOARP; dev->addr_len = sizeof(struct in6_addr); + dev->features |= NETIF_F_LLTX; netif_keep_dst(dev); /* This perm addr will be used as interface identifier by IPv6 */ dev->addr_assign_type = NET_ADDR_RANDOM; @@ -1615,6 +1675,7 @@ ip6_tnl_dev_init_gen(struct net_device *dev) { struct ip6_tnl *t = netdev_priv(dev); int ret; + int t_hlen; t->dev = dev; t->net = dev_net(dev); @@ -1630,8 +1691,15 @@ ip6_tnl_dev_init_gen(struct net_device *dev) if (ret) goto destroy_dst; - t->hlen = 0; t->tun_hlen = 0; + t->hlen = t->encap_hlen + t->tun_hlen; + t_hlen = t->hlen + sizeof(struct ipv6hdr); + + dev->type = ARPHRD_TUNNEL6; + dev->hard_header_len = LL_MAX_HEADER + t_hlen; + dev->mtu = ETH_DATA_LEN - t_hlen; + if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) + dev->mtu -= 8; return 0; -- cgit v1.1 From aa3463d65e7b9f5ae322db4a12214c2cb041bc8e Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:18 -0700 Subject: fou: Add encap ops for IPv6 tunnels This patch add a new fou6 module that provides encapsulation operations for IPv6. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/net/fou.h | 2 +- net/ipv6/Makefile | 1 + net/ipv6/fou6.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 142 insertions(+), 1 deletion(-) create mode 100644 net/ipv6/fou6.c diff --git a/include/net/fou.h b/include/net/fou.h index 7d2fda2..f5cc691 100644 --- a/include/net/fou.h +++ b/include/net/fou.h @@ -9,7 +9,7 @@ #include size_t fou_encap_hlen(struct ip_tunnel_encap *e); -static size_t gue_encap_hlen(struct ip_tunnel_encap *e); +size_t gue_encap_hlen(struct ip_tunnel_encap *e); int __fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, u8 *protocol, __be16 *sport, int type); diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile index 5e9d6bf..7ec3129 100644 --- a/net/ipv6/Makefile +++ b/net/ipv6/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_IPV6_VTI) += ip6_vti.o obj-$(CONFIG_IPV6_SIT) += sit.o obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o obj-$(CONFIG_IPV6_GRE) += ip6_gre.o +obj-$(CONFIG_NET_FOU) += fou6.o obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload) diff --git a/net/ipv6/fou6.c b/net/ipv6/fou6.c new file mode 100644 index 0000000..c972d0b --- /dev/null +++ b/net/ipv6/fou6.c @@ -0,0 +1,140 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void fou6_build_udp(struct sk_buff *skb, struct ip_tunnel_encap *e, + struct flowi6 *fl6, u8 *protocol, __be16 sport) +{ + struct udphdr *uh; + + skb_push(skb, sizeof(struct udphdr)); + skb_reset_transport_header(skb); + + uh = udp_hdr(skb); + + uh->dest = e->dport; + uh->source = sport; + uh->len = htons(skb->len); + udp6_set_csum(!(e->flags & TUNNEL_ENCAP_FLAG_CSUM6), skb, + &fl6->saddr, &fl6->daddr, skb->len); + + *protocol = IPPROTO_UDP; +} + +int fou6_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, struct flowi6 *fl6) +{ + __be16 sport; + int err; + int type = e->flags & TUNNEL_ENCAP_FLAG_CSUM6 ? + SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL; + + err = __fou_build_header(skb, e, protocol, &sport, type); + if (err) + return err; + + fou6_build_udp(skb, e, fl6, protocol, sport); + + return 0; +} +EXPORT_SYMBOL(fou6_build_header); + +int gue6_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, + u8 *protocol, struct flowi6 *fl6) +{ + __be16 sport; + int err; + int type = e->flags & TUNNEL_ENCAP_FLAG_CSUM6 ? + SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL; + + err = __gue_build_header(skb, e, protocol, &sport, type); + if (err) + return err; + + fou6_build_udp(skb, e, fl6, protocol, sport); + + return 0; +} +EXPORT_SYMBOL(gue6_build_header); + +#ifdef CONFIG_NET_FOU_IP_TUNNELS + +static const struct ip6_tnl_encap_ops fou_ip6tun_ops = { + .encap_hlen = fou_encap_hlen, + .build_header = fou6_build_header, +}; + +static const struct ip6_tnl_encap_ops gue_ip6tun_ops = { + .encap_hlen = gue_encap_hlen, + .build_header = gue6_build_header, +}; + +static int ip6_tnl_encap_add_fou_ops(void) +{ + int ret; + + ret = ip6_tnl_encap_add_ops(&fou_ip6tun_ops, TUNNEL_ENCAP_FOU); + if (ret < 0) { + pr_err("can't add fou6 ops\n"); + return ret; + } + + ret = ip6_tnl_encap_add_ops(&gue_ip6tun_ops, TUNNEL_ENCAP_GUE); + if (ret < 0) { + pr_err("can't add gue6 ops\n"); + ip6_tnl_encap_del_ops(&fou_ip6tun_ops, TUNNEL_ENCAP_FOU); + return ret; + } + + return 0; +} + +static void ip6_tnl_encap_del_fou_ops(void) +{ + ip6_tnl_encap_del_ops(&fou_ip6tun_ops, TUNNEL_ENCAP_FOU); + ip6_tnl_encap_del_ops(&gue_ip6tun_ops, TUNNEL_ENCAP_GUE); +} + +#else + +static int ip6_tnl_encap_add_fou_ops(void) +{ + return 0; +} + +static void ip6_tnl_encap_del_fou_ops(void) +{ +} + +#endif + +static int __init fou6_init(void) +{ + int ret; + + ret = ip6_tnl_encap_add_fou_ops(); + + return ret; +} + +static void __exit fou6_fini(void) +{ + ip6_tnl_encap_del_fou_ops(); +} + +module_init(fou6_init); +module_exit(fou6_fini); +MODULE_AUTHOR("Tom Herbert "); +MODULE_LICENSE("GPL"); -- cgit v1.1 From 1faf3d9f7c06c803397665ada1448f374e8f48e0 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:19 -0700 Subject: ip6_gre: Add support for fou/gue encapsulation Add netlink and setup for encapsulation Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 4541fa5..6fb1b89 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -729,7 +729,7 @@ static void ip6gre_tnl_link_config(struct ip6_tnl *t, int set_mtu) t->tun_hlen = gre_calc_hlen(t->parms.o_flags); - t->hlen = t->tun_hlen; + t->hlen = t->encap_hlen + t->tun_hlen; t_hlen = t->hlen + sizeof(struct ipv6hdr); @@ -1022,9 +1022,7 @@ static int ip6gre_tunnel_init_common(struct net_device *dev) } tunnel->tun_hlen = gre_calc_hlen(tunnel->parms.o_flags); - - tunnel->hlen = tunnel->tun_hlen; - + tunnel->hlen = tunnel->tun_hlen + tunnel->encap_hlen; t_hlen = tunnel->hlen + sizeof(struct ipv6hdr); dev->hard_header_len = LL_MAX_HEADER + t_hlen; @@ -1290,15 +1288,57 @@ static void ip6gre_tap_setup(struct net_device *dev) dev->priv_flags &= ~IFF_TX_SKB_SHARING; } +static bool ip6gre_netlink_encap_parms(struct nlattr *data[], + struct ip_tunnel_encap *ipencap) +{ + bool ret = false; + + memset(ipencap, 0, sizeof(*ipencap)); + + if (!data) + return ret; + + if (data[IFLA_GRE_ENCAP_TYPE]) { + ret = true; + ipencap->type = nla_get_u16(data[IFLA_GRE_ENCAP_TYPE]); + } + + if (data[IFLA_GRE_ENCAP_FLAGS]) { + ret = true; + ipencap->flags = nla_get_u16(data[IFLA_GRE_ENCAP_FLAGS]); + } + + if (data[IFLA_GRE_ENCAP_SPORT]) { + ret = true; + ipencap->sport = nla_get_be16(data[IFLA_GRE_ENCAP_SPORT]); + } + + if (data[IFLA_GRE_ENCAP_DPORT]) { + ret = true; + ipencap->dport = nla_get_be16(data[IFLA_GRE_ENCAP_DPORT]); + } + + return ret; +} + static int ip6gre_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct ip6_tnl *nt; struct net *net = dev_net(dev); struct ip6gre_net *ign = net_generic(net, ip6gre_net_id); + struct ip_tunnel_encap ipencap; int err; nt = netdev_priv(dev); + + if (ip6gre_netlink_encap_parms(data, &ipencap)) { + int err = ip6_tnl_encap_setup(nt, &ipencap); + + if (err < 0) + return err; + } + ip6gre_netlink_parms(data, &nt->parms); if (ip6gre_tunnel_find(net, &nt->parms, dev->type)) @@ -1345,10 +1385,18 @@ static int ip6gre_changelink(struct net_device *dev, struct nlattr *tb[], struct net *net = nt->net; struct ip6gre_net *ign = net_generic(net, ip6gre_net_id); struct __ip6_tnl_parm p; + struct ip_tunnel_encap ipencap; if (dev == ign->fb_tunnel_dev) return -EINVAL; + if (ip6gre_netlink_encap_parms(data, &ipencap)) { + int err = ip6_tnl_encap_setup(nt, &ipencap); + + if (err < 0) + return err; + } + ip6gre_netlink_parms(data, &p); t = ip6gre_tunnel_locate(net, &p, 0); @@ -1400,6 +1448,14 @@ static size_t ip6gre_get_size(const struct net_device *dev) nla_total_size(4) + /* IFLA_GRE_FLAGS */ nla_total_size(4) + + /* IFLA_GRE_ENCAP_TYPE */ + nla_total_size(2) + + /* IFLA_GRE_ENCAP_FLAGS */ + nla_total_size(2) + + /* IFLA_GRE_ENCAP_SPORT */ + nla_total_size(2) + + /* IFLA_GRE_ENCAP_DPORT */ + nla_total_size(2) + 0; } @@ -1422,6 +1478,17 @@ static int ip6gre_fill_info(struct sk_buff *skb, const struct net_device *dev) nla_put_be32(skb, IFLA_GRE_FLOWINFO, p->flowinfo) || nla_put_u32(skb, IFLA_GRE_FLAGS, p->flags)) goto nla_put_failure; + + if (nla_put_u16(skb, IFLA_GRE_ENCAP_TYPE, + t->encap.type) || + nla_put_be16(skb, IFLA_GRE_ENCAP_SPORT, + t->encap.sport) || + nla_put_be16(skb, IFLA_GRE_ENCAP_DPORT, + t->encap.dport) || + nla_put_u16(skb, IFLA_GRE_ENCAP_FLAGS, + t->encap.flags)) + goto nla_put_failure; + return 0; nla_put_failure: @@ -1440,6 +1507,10 @@ static const struct nla_policy ip6gre_policy[IFLA_GRE_MAX + 1] = { [IFLA_GRE_ENCAP_LIMIT] = { .type = NLA_U8 }, [IFLA_GRE_FLOWINFO] = { .type = NLA_U32 }, [IFLA_GRE_FLAGS] = { .type = NLA_U32 }, + [IFLA_GRE_ENCAP_TYPE] = { .type = NLA_U16 }, + [IFLA_GRE_ENCAP_FLAGS] = { .type = NLA_U16 }, + [IFLA_GRE_ENCAP_SPORT] = { .type = NLA_U16 }, + [IFLA_GRE_ENCAP_DPORT] = { .type = NLA_U16 }, }; static struct rtnl_link_ops ip6gre_link_ops __read_mostly = { -- cgit v1.1 From b3a27b519b22d4bf03788f6826190d4c5a130b3c Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:20 -0700 Subject: ip6_tunnel: Add support for fou/gue encapsulation Add netlink and setup for encapsulation Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 64ddbeac..74b35e4 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1797,13 +1797,55 @@ static void ip6_tnl_netlink_parms(struct nlattr *data[], parms->proto = nla_get_u8(data[IFLA_IPTUN_PROTO]); } +static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[], + struct ip_tunnel_encap *ipencap) +{ + bool ret = false; + + memset(ipencap, 0, sizeof(*ipencap)); + + if (!data) + return ret; + + if (data[IFLA_IPTUN_ENCAP_TYPE]) { + ret = true; + ipencap->type = nla_get_u16(data[IFLA_IPTUN_ENCAP_TYPE]); + } + + if (data[IFLA_IPTUN_ENCAP_FLAGS]) { + ret = true; + ipencap->flags = nla_get_u16(data[IFLA_IPTUN_ENCAP_FLAGS]); + } + + if (data[IFLA_IPTUN_ENCAP_SPORT]) { + ret = true; + ipencap->sport = nla_get_be16(data[IFLA_IPTUN_ENCAP_SPORT]); + } + + if (data[IFLA_IPTUN_ENCAP_DPORT]) { + ret = true; + ipencap->dport = nla_get_be16(data[IFLA_IPTUN_ENCAP_DPORT]); + } + + return ret; +} + static int ip6_tnl_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct net *net = dev_net(dev); struct ip6_tnl *nt, *t; + struct ip_tunnel_encap ipencap; nt = netdev_priv(dev); + + if (ip6_tnl_netlink_encap_parms(data, &ipencap)) { + int err = ip6_tnl_encap_setup(nt, &ipencap); + + if (err < 0) + return err; + } + ip6_tnl_netlink_parms(data, &nt->parms); t = ip6_tnl_locate(net, &nt->parms, 0); @@ -1820,10 +1862,17 @@ static int ip6_tnl_changelink(struct net_device *dev, struct nlattr *tb[], struct __ip6_tnl_parm p; struct net *net = t->net; struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); + struct ip_tunnel_encap ipencap; if (dev == ip6n->fb_tnl_dev) return -EINVAL; + if (ip6_tnl_netlink_encap_parms(data, &ipencap)) { + int err = ip6_tnl_encap_setup(t, &ipencap); + + if (err < 0) + return err; + } ip6_tnl_netlink_parms(data, &p); t = ip6_tnl_locate(net, &p, 0); @@ -1864,6 +1913,14 @@ static size_t ip6_tnl_get_size(const struct net_device *dev) nla_total_size(4) + /* IFLA_IPTUN_PROTO */ nla_total_size(1) + + /* IFLA_IPTUN_ENCAP_TYPE */ + nla_total_size(2) + + /* IFLA_IPTUN_ENCAP_FLAGS */ + nla_total_size(2) + + /* IFLA_IPTUN_ENCAP_SPORT */ + nla_total_size(2) + + /* IFLA_IPTUN_ENCAP_DPORT */ + nla_total_size(2) + 0; } @@ -1881,6 +1938,17 @@ static int ip6_tnl_fill_info(struct sk_buff *skb, const struct net_device *dev) nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) || nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto)) goto nla_put_failure; + + if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, + tunnel->encap.type) || + nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, + tunnel->encap.sport) || + nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, + tunnel->encap.dport) || + nla_put_u16(skb, IFLA_IPTUN_ENCAP_FLAGS, + tunnel->encap.flags)) + goto nla_put_failure; + return 0; nla_put_failure: @@ -1904,6 +1972,10 @@ static const struct nla_policy ip6_tnl_policy[IFLA_IPTUN_MAX + 1] = { [IFLA_IPTUN_FLOWINFO] = { .type = NLA_U32 }, [IFLA_IPTUN_FLAGS] = { .type = NLA_U32 }, [IFLA_IPTUN_PROTO] = { .type = NLA_U8 }, + [IFLA_IPTUN_ENCAP_TYPE] = { .type = NLA_U16 }, + [IFLA_IPTUN_ENCAP_FLAGS] = { .type = NLA_U16 }, + [IFLA_IPTUN_ENCAP_SPORT] = { .type = NLA_U16 }, + [IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 }, }; static struct rtnl_link_ops ip6_link_ops __read_mostly = { -- cgit v1.1 From 51c052d4f5871554377278762065450b4e64f6d1 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:21 -0700 Subject: ipv6: Set features for IPv6 tunnels Need to set dev features, use same values that are used in GREv6. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 74b35e4..cabf492 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1640,6 +1640,11 @@ static const struct net_device_ops ip6_tnl_netdev_ops = { .ndo_get_iflink = ip6_tnl_get_iflink, }; +#define IPXIPX_FEATURES (NETIF_F_SG | \ + NETIF_F_FRAGLIST | \ + NETIF_F_HIGHDMA | \ + NETIF_F_GSO_SOFTWARE | \ + NETIF_F_HW_CSUM) /** * ip6_tnl_dev_setup - setup virtual tunnel device @@ -1659,6 +1664,10 @@ static void ip6_tnl_dev_setup(struct net_device *dev) dev->addr_len = sizeof(struct in6_addr); dev->features |= NETIF_F_LLTX; netif_keep_dst(dev); + + dev->features |= IPXIPX_FEATURES; + dev->hw_features |= IPXIPX_FEATURES; + /* This perm addr will be used as interface identifier by IPv6 */ dev->addr_assign_type = NET_ADDR_RANDOM; eth_random_addr(dev->perm_addr); -- cgit v1.1 From 815d22e55b0eba3bfb8f0ba532ce9ae364fee556 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:22 -0700 Subject: ip6ip6: Support for GSO/GRO Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_offload.c | 24 +++++++++++++++++++++--- net/ipv6/ip6_tunnel.c | 5 +++++ 2 files changed, 26 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 787e55f..332d6a0 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -253,9 +253,11 @@ out: return pp; } -static struct sk_buff **sit_gro_receive(struct sk_buff **head, - struct sk_buff *skb) +static struct sk_buff **sit_ip6ip6_gro_receive(struct sk_buff **head, + struct sk_buff *skb) { + /* Common GRO receive for SIT and IP6IP6 */ + if (NAPI_GRO_CB(skb)->encap_mark) { NAPI_GRO_CB(skb)->flush = 1; return NULL; @@ -298,6 +300,13 @@ static int sit_gro_complete(struct sk_buff *skb, int nhoff) return ipv6_gro_complete(skb, nhoff); } +static int ip6ip6_gro_complete(struct sk_buff *skb, int nhoff) +{ + skb->encapsulation = 1; + skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP6; + return ipv6_gro_complete(skb, nhoff); +} + static struct packet_offload ipv6_packet_offload __read_mostly = { .type = cpu_to_be16(ETH_P_IPV6), .callbacks = { @@ -310,11 +319,19 @@ static struct packet_offload ipv6_packet_offload __read_mostly = { static const struct net_offload sit_offload = { .callbacks = { .gso_segment = ipv6_gso_segment, - .gro_receive = sit_gro_receive, + .gro_receive = sit_ip6ip6_gro_receive, .gro_complete = sit_gro_complete, }, }; +static const struct net_offload ip6ip6_offload = { + .callbacks = { + .gso_segment = ipv6_gso_segment, + .gro_receive = sit_ip6ip6_gro_receive, + .gro_complete = ip6ip6_gro_complete, + }, +}; + static int __init ipv6_offload_init(void) { @@ -326,6 +343,7 @@ static int __init ipv6_offload_init(void) dev_add_offload(&ipv6_packet_offload); inet_add_offload(&sit_offload, IPPROTO_IPV6); + inet6_add_offload(&ip6ip6_offload, IPPROTO_IPV6); return 0; } diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index cabf492..d26d226 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1242,6 +1242,11 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) fl6.flowi6_mark = skb->mark; + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) + return -1; + + skb_set_inner_ipproto(skb, IPPROTO_IPV6); + err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu, IPPROTO_IPV6); if (err != 0) { -- cgit v1.1 From b8921ca83eed2496108ee308e9a41c5084089680 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:23 -0700 Subject: ip4ip6: Support for GSO/GRO Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/net/inet_common.h | 5 +++++ net/ipv4/af_inet.c | 12 +++++++----- net/ipv6/ip6_offload.c | 33 ++++++++++++++++++++++++++++++++- net/ipv6/ip6_tunnel.c | 5 +++++ 4 files changed, 49 insertions(+), 6 deletions(-) diff --git a/include/net/inet_common.h b/include/net/inet_common.h index 109e3ee..5d68342 100644 --- a/include/net/inet_common.h +++ b/include/net/inet_common.h @@ -39,6 +39,11 @@ int inet_ctl_sock_create(struct sock **sk, unsigned short family, int inet_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len); +struct sk_buff **inet_gro_receive(struct sk_buff **head, struct sk_buff *skb); +int inet_gro_complete(struct sk_buff *skb, int nhoff); +struct sk_buff *inet_gso_segment(struct sk_buff *skb, + netdev_features_t features); + static inline void inet_ctl_sock_destroy(struct sock *sk) { if (sk) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 25040b1..377424e 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1192,8 +1192,8 @@ int inet_sk_rebuild_header(struct sock *sk) } EXPORT_SYMBOL(inet_sk_rebuild_header); -static struct sk_buff *inet_gso_segment(struct sk_buff *skb, - netdev_features_t features) +struct sk_buff *inet_gso_segment(struct sk_buff *skb, + netdev_features_t features) { bool udpfrag = false, fixedid = false, encap; struct sk_buff *segs = ERR_PTR(-EINVAL); @@ -1280,9 +1280,9 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, out: return segs; } +EXPORT_SYMBOL(inet_gso_segment); -static struct sk_buff **inet_gro_receive(struct sk_buff **head, - struct sk_buff *skb) +struct sk_buff **inet_gro_receive(struct sk_buff **head, struct sk_buff *skb) { const struct net_offload *ops; struct sk_buff **pp = NULL; @@ -1398,6 +1398,7 @@ out: return pp; } +EXPORT_SYMBOL(inet_gro_receive); static struct sk_buff **ipip_gro_receive(struct sk_buff **head, struct sk_buff *skb) @@ -1449,7 +1450,7 @@ int inet_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) return -EINVAL; } -static int inet_gro_complete(struct sk_buff *skb, int nhoff) +int inet_gro_complete(struct sk_buff *skb, int nhoff) { __be16 newlen = htons(skb->len - nhoff); struct iphdr *iph = (struct iphdr *)(skb->data + nhoff); @@ -1479,6 +1480,7 @@ out_unlock: return err; } +EXPORT_SYMBOL(inet_gro_complete); static int ipip_gro_complete(struct sk_buff *skb, int nhoff) { diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 332d6a0..22e90e5 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -16,6 +16,7 @@ #include #include +#include #include "ip6_offload.h" @@ -268,6 +269,21 @@ static struct sk_buff **sit_ip6ip6_gro_receive(struct sk_buff **head, return ipv6_gro_receive(head, skb); } +static struct sk_buff **ip4ip6_gro_receive(struct sk_buff **head, + struct sk_buff *skb) +{ + /* Common GRO receive for SIT and IP6IP6 */ + + if (NAPI_GRO_CB(skb)->encap_mark) { + NAPI_GRO_CB(skb)->flush = 1; + return NULL; + } + + NAPI_GRO_CB(skb)->encap_mark = 1; + + return inet_gro_receive(head, skb); +} + static int ipv6_gro_complete(struct sk_buff *skb, int nhoff) { const struct net_offload *ops; @@ -307,6 +323,13 @@ static int ip6ip6_gro_complete(struct sk_buff *skb, int nhoff) return ipv6_gro_complete(skb, nhoff); } +static int ip4ip6_gro_complete(struct sk_buff *skb, int nhoff) +{ + skb->encapsulation = 1; + skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP6; + return inet_gro_complete(skb, nhoff); +} + static struct packet_offload ipv6_packet_offload __read_mostly = { .type = cpu_to_be16(ETH_P_IPV6), .callbacks = { @@ -324,6 +347,14 @@ static const struct net_offload sit_offload = { }, }; +static const struct net_offload ip4ip6_offload = { + .callbacks = { + .gso_segment = inet_gso_segment, + .gro_receive = ip4ip6_gro_receive, + .gro_complete = ip4ip6_gro_complete, + }, +}; + static const struct net_offload ip6ip6_offload = { .callbacks = { .gso_segment = ipv6_gso_segment, @@ -331,7 +362,6 @@ static const struct net_offload ip6ip6_offload = { .gro_complete = ip6ip6_gro_complete, }, }; - static int __init ipv6_offload_init(void) { @@ -344,6 +374,7 @@ static int __init ipv6_offload_init(void) inet_add_offload(&sit_offload, IPPROTO_IPV6); inet6_add_offload(&ip6ip6_offload, IPPROTO_IPV6); + inet6_add_offload(&ip4ip6_offload, IPPROTO_IPIP); return 0; } diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index d26d226..823dad1 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1188,6 +1188,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) fl6.flowi6_mark = skb->mark; + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) + return -1; + + skb_set_inner_ipproto(skb, IPPROTO_IPIP); + err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu, IPPROTO_IPIP); if (err != 0) { -- cgit v1.1 From 3ee93eaf2bbfbe0083f71a18a265d48adbd5bb27 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 18 May 2016 09:06:24 -0700 Subject: ipv6: Don't reset inner headers in ip6_tnl_xmit Since iptunnel_handle_offloads() is called in all paths we can probably drop the block in ip6_tnl_xmit that was checking for skb->encapsulation and resetting the inner headers. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 823dad1..7b0481e 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1120,11 +1120,6 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, ipv6_push_nfrag_opts(skb, &opt.ops, &proto, NULL); } - if (likely(!skb->encapsulation)) { - skb_reset_inner_headers(skb); - skb->encapsulation = 1; - } - /* Calculate max headroom for all the headers and adjust * needed_headroom if necessary. */ -- cgit v1.1 From fc64869c48494a401b1fb627c9ecc4e6c1d74b0d Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Wed, 18 May 2016 19:19:27 +0300 Subject: net: sock: move ->sk_shutdown out of bitfields. ->sk_shutdown bits share one bitfield with some other bits in sock struct, such as ->sk_no_check_[r,t]x, ->sk_userlocks ... sock_setsockopt() may write to these bits, while holding the socket lock. In case of AF_UNIX sockets, we change ->sk_shutdown bits while holding only unix_state_lock(). So concurrent setsockopt() and shutdown() may lead to corrupting these bits. Fix this by moving ->sk_shutdown bits out of bitfield into a separate byte. This will not change the 'struct sock' size since ->sk_shutdown moved into previously unused 16-bit hole. Signed-off-by: Andrey Ryabinin Suggested-by: Hannes Frederic Sowa Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index c9c8b19..649d2a8 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -382,8 +382,13 @@ struct sock { atomic_t sk_omem_alloc; int sk_sndbuf; struct sk_buff_head sk_write_queue; + + /* + * Because of non atomicity rules, all + * changes are protected by socket lock. + */ kmemcheck_bitfield_begin(flags); - unsigned int sk_shutdown : 2, + unsigned int sk_padding : 2, sk_no_check_tx : 1, sk_no_check_rx : 1, sk_userlocks : 4, @@ -391,6 +396,7 @@ struct sock { sk_type : 16; #define SK_PROTOCOL_MAX U8_MAX kmemcheck_bitfield_end(flags); + int sk_wmem_queued; gfp_t sk_allocation; u32 sk_pacing_rate; /* bytes per second */ @@ -418,6 +424,7 @@ struct sock { struct timer_list sk_timer; ktime_t sk_stamp; u16 sk_tsflags; + u8 sk_shutdown; u32 sk_tskey; struct socket *sk_socket; void *sk_user_data; -- cgit v1.1 From 37e14f4fe2991f6089a9c8a3830e3ab634ec7190 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Wed, 18 May 2016 10:06:23 -0700 Subject: RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp There are two instances where we want to terminate RDS-TCP: when exiting the netns or during module unload. In either case, the termination sequence is to stop the listen socket, mark the rtn->rds_tcp_listen_sock as null, and flush any accept workqs. Thus any workqs that get flushed at this point will encounter a null rds_tcp_listen_sock, and must exit gracefully to allow the RDS-TCP termination to complete successfully. Signed-off-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- net/rds/tcp_listen.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 3fa3679..094a8ca 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -80,6 +80,9 @@ int rds_tcp_accept_one(struct socket *sock) int conn_state; struct sock *nsk; + if (!sock) /* module unload or netns delete in progress */ + return -ENETUNREACH; + ret = sock_create_kern(sock_net(sock->sk), sock->sk->sk_family, sock->sk->sk_type, sock->sk->sk_protocol, &new_sock); -- cgit v1.1 From c948bb5c2cc4d63f9d76fc02baf5a8331e3cd27f Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Wed, 18 May 2016 10:06:24 -0700 Subject: RDS: TCP: Avoid rds connection churn from rogue SYNs When a rogue SYN is received after the connection arbitration algorithm has converged, the incoming SYN should not needlessly quiesce the transmit path, and it should not result in needless TCP connection resets due to re-execution of the connection arbitration logic. Signed-off-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- net/rds/tcp_listen.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 094a8ca..4bf4bef 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -132,11 +132,13 @@ int rds_tcp_accept_one(struct socket *sock) * so we must quiesce any send threads before resetting * c_transport_data. */ - wait_event(conn->c_waitq, - !test_bit(RDS_IN_XMIT, &conn->c_flags)); - if (ntohl(inet->inet_saddr) < ntohl(inet->inet_daddr)) { + if (ntohl(inet->inet_saddr) < ntohl(inet->inet_daddr) || + !conn->c_outgoing) { goto rst_nsk; - } else if (rs_tcp->t_sock) { + } else { + atomic_set(&conn->c_state, RDS_CONN_CONNECTING); + wait_event(conn->c_waitq, + !test_bit(RDS_IN_XMIT, &conn->c_flags)); rds_tcp_restore_callbacks(rs_tcp->t_sock, rs_tcp); conn->c_outgoing = 0; } -- cgit v1.1 From 6a5536810180bb2c739df890a36cfa29da1914eb Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 18 May 2016 10:44:47 -0700 Subject: ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE This patch addresses the same issue we had for IPv4 where enabling GRE with an inner checksum cannot be supported with FOU/GUE due to the fact that they will jump past the GRE header at it is treated like a tunnel header. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 6fb1b89..af503f5 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1355,11 +1355,15 @@ static int ip6gre_newlink(struct net *src_net, struct net_device *dev, dev->hw_features |= GRE6_FEATURES; if (!(nt->parms.o_flags & TUNNEL_SEQ)) { - /* TCP segmentation offload is not supported when we - * generate output sequences. + /* TCP offload with GRE SEQ is not supported, nor + * can we support 2 levels of outer headers requiring + * an update. */ - dev->features |= NETIF_F_GSO_SOFTWARE; - dev->hw_features |= NETIF_F_GSO_SOFTWARE; + if (!(nt->parms.o_flags & TUNNEL_CSUM) || + (nt->encap.type == TUNNEL_ENCAP_NONE)) { + dev->features |= NETIF_F_GSO_SOFTWARE; + dev->hw_features |= NETIF_F_GSO_SOFTWARE; + } /* Can use a lockless transmit, unless we generate * output sequences -- cgit v1.1 From bf2d1df395028519f7a435ccde02820d16ec27a7 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 18 May 2016 10:44:53 -0700 Subject: intel: Add support for IPv6 IP-in-IP offload This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 1 + drivers/net/ethernet/intel/i40e/i40e_txrx.c | 1 + drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 1 + drivers/net/ethernet/intel/i40evf/i40evf_main.c | 1 + drivers/net/ethernet/intel/igb/igb_main.c | 1 + drivers/net/ethernet/intel/igbvf/netdev.c | 1 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 + drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 + 8 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 242a1ff..5ea2200 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -9084,6 +9084,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_IPXIP6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_PARTIAL | diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 0a8122c..55f151f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2285,6 +2285,7 @@ static int i40e_tso(struct sk_buff *skb, u8 *hdr_len, u64 *cd_type_cmd_tso_mss) if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | SKB_GSO_GRE_CSUM | SKB_GSO_IPXIP4 | + SKB_GSO_IPXIP6 | SKB_GSO_UDP_TUNNEL | SKB_GSO_UDP_TUNNEL_CSUM)) { if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 2bbbbd0..be99189 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1560,6 +1560,7 @@ static int i40e_tso(struct sk_buff *skb, u8 *hdr_len, u64 *cd_type_cmd_tso_mss) if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | SKB_GSO_GRE_CSUM | SKB_GSO_IPXIP4 | + SKB_GSO_IPXIP6 | SKB_GSO_UDP_TUNNEL | SKB_GSO_UDP_TUNNEL_CSUM)) { if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 02d0a1c..16c5529 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2231,6 +2231,7 @@ int i40evf_process_config(struct i40evf_adapter *adapter) NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_IPXIP6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_GSO_PARTIAL | diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index b1a5cdb..ef3d642 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2419,6 +2419,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IGB_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ NETIF_F_GSO_IPXIP4 | \ + NETIF_F_GSO_IPXIP6 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 79b907f..b0778ba 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2764,6 +2764,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IGBVF_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ NETIF_F_GSO_IPXIP4 | \ + NETIF_F_GSO_IPXIP6 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 69452c3..088c47c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -9483,6 +9483,7 @@ skip_sriov: #define IXGBE_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ NETIF_F_GSO_IPXIP4 | \ + NETIF_F_GSO_IPXIP6 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index d86e511..acc2401 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -4063,6 +4063,7 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #define IXGBEVF_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ NETIF_F_GSO_GRE_CSUM | \ NETIF_F_GSO_IPXIP4 | \ + NETIF_F_GSO_IPXIP6 | \ NETIF_F_GSO_UDP_TUNNEL | \ NETIF_F_GSO_UDP_TUNNEL_CSUM) -- cgit v1.1 From addf8fc4acb1cf79492ac64966f07178793cb3d7 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 19 May 2016 13:36:51 +0800 Subject: tuntap: correctly wake up process during uninit We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet Cc: Xi Wang Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Eric Dumazet Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 425e983..e16487c 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -580,11 +580,13 @@ static void tun_detach_all(struct net_device *dev) for (i = 0; i < n; i++) { tfile = rtnl_dereference(tun->tfiles[i]); BUG_ON(!tfile); + tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN; tfile->socket.sk->sk_data_ready(tfile->socket.sk); RCU_INIT_POINTER(tfile->tun, NULL); --tun->numqueues; } list_for_each_entry(tfile, &tun->disabled, next) { + tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN; tfile->socket.sk->sk_data_ready(tfile->socket.sk); RCU_INIT_POINTER(tfile->tun, NULL); } @@ -641,6 +643,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filte goto out; } tfile->queue_index = tun->numqueues; + tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN; rcu_assign_pointer(tfile->tun, tun); rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile); tun->numqueues++; @@ -1491,9 +1494,6 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, if (!iov_iter_count(to)) return 0; - if (tun->dev->reg_state != NETREG_REGISTERED) - return -EIO; - /* Read frames from queue */ skb = __skb_recv_datagram(tfile->socket.sk, noblock ? MSG_DONTWAIT : 0, &peeked, &off, &err); -- cgit v1.1 From 05a56487174d33fff5986f13c0c8e4b32f046da9 Mon Sep 17 00:00:00 2001 From: Rafal Redzimski Date: Thu, 19 May 2016 11:56:09 +0200 Subject: net: cdc_ncm: update datagram size after changing mtu Current implementation updates the mtu size and notify cdc_ncm device using USB_CDC_SET_MAX_DATAGRAM_SIZE request about datagram size change instead of changing rx_urb_size. Whenever mtu is being changed, datagram size should also be updated. Also updating maxmtu formula so it takes max_datagram_size with use of cdc_ncm_max_dgram_size() and not ctx. Signed-off-by: Robert Dobrowolski Signed-off-by: Rafal Redzimski Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 2fb31ed..53759c3 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -740,12 +740,14 @@ static void cdc_ncm_free(struct cdc_ncm_ctx *ctx) int cdc_ncm_change_mtu(struct net_device *net, int new_mtu) { struct usbnet *dev = netdev_priv(net); - struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; - int maxmtu = ctx->max_datagram_size - cdc_ncm_eth_hlen(dev); + int maxmtu = cdc_ncm_max_dgram_size(dev) - cdc_ncm_eth_hlen(dev); if (new_mtu <= 0 || new_mtu > maxmtu) return -EINVAL; + net->mtu = new_mtu; + cdc_ncm_set_dgram_size(dev, new_mtu + cdc_ncm_eth_hlen(dev)); + return 0; } EXPORT_SYMBOL_GPL(cdc_ncm_change_mtu); -- cgit v1.1 From e27f4a942a0ee4b84567a3c6cfa84f273e55cbb7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 20 May 2016 17:22:48 -0500 Subject: bpf: Use mount_nodev not mount_ns to mount the bpf filesystem While reviewing the filesystems that set FS_USERNS_MOUNT I spotted the bpf filesystem. Looking at the code I saw a broken usage of mount_ns with current->nsproxy->mnt_ns. As the code does not acquire a reference to the mount namespace it can not possibly be correct to store the mount namespace on the superblock as it does. Replace mount_ns with mount_nodev so that each mount of the bpf filesystem returns a distinct instance, and the code is not buggy. In discussion with Hannes Frederic Sowa it was reported that the use of mount_ns was an attempt to have one bpf instance per mount namespace, in an attempt to keep resources that pin resources from hiding. That intent simply does not work, the vfs is not built to allow that kind of behavior. Which means that the bpf filesystem really is buggy both semantically and in it's implemenation as it does not nor can it implement the original intent. This change is userspace visible, but my experience with similar filesystems leads me to believe nothing will break with a model of each mount of the bpf filesystem is distinct from all others. Fixes: b2197755b263 ("bpf: add support for persistent maps/progs") Cc: Hannes Frederic Sowa Acked-by: Daniel Borkmann Signed-off-by: "Eric W. Biederman" Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- kernel/bpf/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c index 71b75d9..04be702 100644 --- a/kernel/bpf/inode.c +++ b/kernel/bpf/inode.c @@ -357,7 +357,7 @@ static int bpf_fill_super(struct super_block *sb, void *data, int silent) static struct dentry *bpf_mount(struct file_system_type *type, int flags, const char *dev_name, void *data) { - return mount_ns(type, flags, current->nsproxy->mnt_ns, bpf_fill_super); + return mount_nodev(type, flags, data, bpf_fill_super); } static struct file_system_type bpf_fs_type = { -- cgit v1.1 From 7c542772cc5ff061ec3d06658f5d36304bcd5395 Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Thu, 19 May 2016 19:22:49 +0530 Subject: net:liquidio: use kmemdup Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/octeon_device.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.c b/drivers/net/ethernet/cavium/liquidio/octeon_device.c index f67641a..8e23e3f 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_device.c +++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.c @@ -602,12 +602,10 @@ int octeon_download_firmware(struct octeon_device *oct, const u8 *data, snprintf(oct->fw_info.liquidio_firmware_version, 32, "LIQUIDIO: %s", h->version); - buffer = kmalloc(size, GFP_KERNEL); + buffer = kmemdup(data, size, GFP_KERNEL); if (!buffer) return -ENOMEM; - memcpy(buffer, data, size); - p = buffer + sizeof(struct octeon_firmware_file_header); /* load all images */ -- cgit v1.1 From 5877debe27917dfd7aa8f960c228dbbc1de8282f Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Thu, 19 May 2016 19:24:41 +0530 Subject: ps3_gelic: use kmemdup Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani Signed-off-by: David S. Miller --- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 743b182..446ea58 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -1616,13 +1616,13 @@ static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl) target->valid = 1; target->eurus_index = i; kfree(target->hwinfo); - target->hwinfo = kzalloc(be16_to_cpu(scan_info->size), + target->hwinfo = kmemdup(scan_info, + be16_to_cpu(scan_info->size), GFP_KERNEL); if (!target->hwinfo) continue; /* copy hw scan info */ - memcpy(target->hwinfo, scan_info, be16_to_cpu(scan_info->size)); target->essid_len = strnlen(scan_info->essid, sizeof(scan_info->essid)); target->rate_len = 0; -- cgit v1.1 From 238a9584e9e2c7b3ea23924e9183fee05d584789 Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Thu, 19 May 2016 19:26:50 +0530 Subject: net: usb: ch9200: use kmemdup Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani Signed-off-by: David S. Miller --- drivers/net/usb/ch9200.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/usb/ch9200.c b/drivers/net/usb/ch9200.c index 5e151e6..8a40202 100644 --- a/drivers/net/usb/ch9200.c +++ b/drivers/net/usb/ch9200.c @@ -155,12 +155,11 @@ static int control_write(struct usbnet *dev, unsigned char request, index, size); if (data) { - buf = kmalloc(size, GFP_KERNEL); + buf = kmemdup(data, size, GFP_KERNEL); if (!buf) { err = -ENOMEM; goto err_out; } - memcpy(buf, data, size); } err = usb_control_msg(dev->udev, -- cgit v1.1 From d91b28ed42de99217efb2e8cb0357263d6fb737c Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 19 May 2016 18:17:13 -0700 Subject: bpf: support decreasing order in direct packet access when packet headers are accessed in 'decreasing' order (like TCP port may be fetched before the program reads IP src) the llvm may generate the following code: [...] // R7=pkt(id=0,off=22,r=70) r2 = *(u32 *)(r7 +0) // good access [...] r7 += 40 // R7=pkt(id=0,off=62,r=70) r8 = *(u32 *)(r7 +0) // good access [...] r1 = *(u32 *)(r7 -20) // this one will fail though it's within a safe range // it's doing *(u32*)(skb->data + 42) Fix verifier to recognize such code pattern Alos turned out that 'off > range' condition is not a verifier bug. It's a buggy program that may do something like: if (ptr + 50 > data_end) return 0; ptr += 60; *(u32*)ptr; in such case emit "invalid access to packet, off=0 size=4, R1(id=0,off=60,r=50)" error message, so all information is available for the program author to fix the program. Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- kernel/bpf/verifier.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index a08d662..d54e348 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -683,15 +683,11 @@ static int check_packet_access(struct verifier_env *env, u32 regno, int off, { struct reg_state *regs = env->cur_state.regs; struct reg_state *reg = ®s[regno]; - int linear_size = (int) reg->range - (int) reg->off; - if (linear_size < 0 || linear_size >= MAX_PACKET_OFF) { - verbose("verifier bug\n"); - return -EFAULT; - } - if (off < 0 || off + size > linear_size) { - verbose("invalid access to packet, off=%d size=%d, allowed=%d\n", - off, size, linear_size); + off += reg->off; + if (off < 0 || off + size > reg->range) { + verbose("invalid access to packet, off=%d size=%d, R%d(id=%d,off=%d,r=%d)\n", + off, size, regno, reg->id, reg->off, reg->range); return -EACCES; } return 0; -- cgit v1.1 From 1b9b69ecb3a5236d4d3da0f0fa11af916371841e Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 19 May 2016 18:17:14 -0700 Subject: bpf: teach verifier to recognize imm += ptr pattern Humans don't write C code like: u8 *ptr = skb->data; int imm = 4; imm += ptr; but from llvm backend point of view 'imm' and 'ptr' are registers and imm += ptr may be preferred vs ptr += imm depending which register value will be used further in the code, while verifier can only recognize ptr += imm. That caused small unrelated changes in the C code of the bpf program to trigger rejection by the verifier. Therefore teach the verifier to recognize both ptr += imm and imm += ptr. For example: when R6=pkt(id=0,off=0,r=62) R7=imm22 after r7 += r6 instruction will be R6=pkt(id=0,off=0,r=62) R7=pkt(id=0,off=22,r=62) Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- kernel/bpf/verifier.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index d54e348..668e079 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1245,6 +1245,7 @@ static int check_packet_ptr_add(struct verifier_env *env, struct bpf_insn *insn) struct reg_state *regs = env->cur_state.regs; struct reg_state *dst_reg = ®s[insn->dst_reg]; struct reg_state *src_reg = ®s[insn->src_reg]; + struct reg_state tmp_reg; s32 imm; if (BPF_SRC(insn->code) == BPF_K) { @@ -1267,6 +1268,19 @@ add_imm: */ dst_reg->off += imm; } else { + if (src_reg->type == PTR_TO_PACKET) { + /* R6=pkt(id=0,off=0,r=62) R7=imm22; r7 += r6 */ + tmp_reg = *dst_reg; /* save r7 state */ + *dst_reg = *src_reg; /* copy pkt_ptr state r6 into r7 */ + src_reg = &tmp_reg; /* pretend it's src_reg state */ + /* if the checks below reject it, the copy won't matter, + * since we're rejecting the whole program. If all ok, + * then imm22 state will be added to r7 + * and r7 will be pkt(id=0,off=22,r=62) while + * r6 will stay as pkt(id=0,off=0,r=62) + */ + } + if (src_reg->type == CONST_IMM) { /* pkt_ptr += reg where reg is known constant */ imm = src_reg->imm; @@ -1565,7 +1579,9 @@ static int check_alu_op(struct verifier_env *env, struct bpf_insn *insn) return 0; } else if (opcode == BPF_ADD && BPF_CLASS(insn->code) == BPF_ALU64 && - dst_reg->type == PTR_TO_PACKET) { + (dst_reg->type == PTR_TO_PACKET || + (BPF_SRC(insn->code) == BPF_X && + regs[insn->src_reg].type == PTR_TO_PACKET))) { /* ptr_to_packet += K|X */ return check_packet_ptr_add(env, insn); } else if (BPF_CLASS(insn->code) == BPF_ALU64 && -- cgit v1.1 From e5aed006be918af163eb397e45aa5ea6cefd5e01 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Thu, 19 May 2016 15:58:33 +0200 Subject: udp: prevent skbs lingering in tunnel socket queues In case we find a socket with encapsulation enabled we should call the encap_recv function even if just a udp header without payload is available. The callbacks are responsible for correctly verifying and dropping the packets. Also, in case the header validation fails for geneve and vxlan we shouldn't put the skb back into the socket queue, no one will pick them up there. Instead we can simply discard them in the respective encap_recv functions. Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/geneve.c | 10 +++------- drivers/net/vxlan.c | 4 ++-- net/ipv4/udp.c | 2 +- net/ipv6/udp.c | 2 +- 4 files changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index a6dc11c..cadefe4 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -335,15 +335,15 @@ static int geneve_udp_encap_recv(struct sock *sk, struct sk_buff *skb) /* Need Geneve and inner Ethernet header to be present */ if (unlikely(!pskb_may_pull(skb, GENEVE_BASE_HLEN))) - goto error; + goto drop; /* Return packets with reserved bits set */ geneveh = geneve_hdr(skb); if (unlikely(geneveh->ver != GENEVE_VER)) - goto error; + goto drop; if (unlikely(geneveh->proto_type != htons(ETH_P_TEB))) - goto error; + goto drop; gs = rcu_dereference_sk_user_data(sk); if (!gs) @@ -366,10 +366,6 @@ drop: /* Consume bad packet */ kfree_skb(skb); return 0; - -error: - /* Let the UDP layer deal with the skb */ - return 1; } static struct socket *geneve_create_sock(struct net *net, bool ipv6, diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 25ab6bf..8ff30c3 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1304,7 +1304,7 @@ static int vxlan_rcv(struct sock *sk, struct sk_buff *skb) /* Need UDP and VXLAN header to be present */ if (!pskb_may_pull(skb, VXLAN_HLEN)) - return 1; + goto drop; unparsed = *vxlan_hdr(skb); /* VNI flag always required to be set */ @@ -1313,7 +1313,7 @@ static int vxlan_rcv(struct sock *sk, struct sk_buff *skb) ntohl(vxlan_hdr(skb)->vx_flags), ntohl(vxlan_hdr(skb)->vx_vni)); /* Return non vxlan pkt */ - return 1; + goto drop; } unparsed.vx_flags &= ~VXLAN_HF_VNI; unparsed.vx_vni &= ~VXLAN_VNI_MASK; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 2e3ebfe..d56c055 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1565,7 +1565,7 @@ int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) /* if we're overly short, let UDP handle it */ encap_rcv = ACCESS_ONCE(up->encap_rcv); - if (skb->len > sizeof(struct udphdr) && encap_rcv) { + if (encap_rcv) { int ret; /* Verify checksum before giving to encap */ diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 2ba6a77..2da1896 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -617,7 +617,7 @@ int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) /* if we're overly short, let UDP handle it */ encap_rcv = ACCESS_ONCE(up->encap_rcv); - if (skb->len > sizeof(struct udphdr) && encap_rcv) { + if (encap_rcv) { int ret; /* Verify checksum before giving to encap */ -- cgit v1.1 From f0a3fdca794d1e68ae284ef4caefe681f7c18e89 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 19 May 2016 17:26:29 +0200 Subject: uapi glibc compat: fix compilation when !__USE_MISC in glibc These structures are defined only if __USE_MISC is set in glibc net/if.h headers, ie when _BSD_SOURCE or _SVID_SOURCE are defined. CC: Jan Engelhardt CC: Josh Boyer CC: Stephen Hemminger CC: Waldemar Brodkorb CC: Gabriel Laskar CC: Mikko Rapeli Fixes: 4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/uapi/linux/libc-compat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h index d5e38c7..e4f048e 100644 --- a/include/uapi/linux/libc-compat.h +++ b/include/uapi/linux/libc-compat.h @@ -52,7 +52,7 @@ #if defined(__GLIBC__) /* Coordinate with glibc net/if.h header. */ -#if defined(_NET_IF_H) +#if defined(_NET_IF_H) && defined(__USE_MISC) /* GLIBC headers included first so don't define anything * that would already be defined. */ -- cgit v1.1 From 95829b3a9c0b1d88778b23bc2afdf5a83de066ff Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 19 May 2016 11:30:54 -0400 Subject: net: suppress warnings on dev_alloc_skb Noticed an allocation failure in a network driver the other day on a 32 bit system: DMA-API: debugging out of memory - disabling bnx2fc: adapter_lookup: hba NULL lldpad: page allocation failure. order:0, mode:0x4120 Pid: 4556, comm: lldpad Not tainted 2.6.32-639.el6.i686.debug #1 Call Trace: [] ? printk+0x19/0x23 [] ? __alloc_pages_nodemask+0x664/0x830 [] ? free_object+0x82/0xa0 [] ? ixgbe_alloc_rx_buffers+0x10b/0x1d0 [ixgbe] [] ? ixgbe_configure_rx_ring+0x29f/0x420 [ixgbe] [] ? ixgbe_configure_tx_ring+0x15c/0x220 [ixgbe] [] ? ixgbe_configure+0x589/0xc00 [ixgbe] [] ? ixgbe_open+0xa7/0x5c0 [ixgbe] [] ? ixgbe_init_interrupt_scheme+0x5b6/0x970 [ixgbe] [] ? ixgbe_setup_tc+0x1a4/0x260 [ixgbe] [] ? ixgbe_dcbnl_set_state+0x7f/0x90 [ixgbe] [] ? dcb_doit+0x10ed/0x16d0 ... Thought that perhaps the big splat in the logs wasn't really necessecary, as all call sites for dev_alloc_skb: a) check the return code for the function and b) either print their own error message or have a recovery path that makes the warning moot. Fix it by modifying dev_alloc_pages to pass __GFP_NOWARN as a gfp flag to suppress the warning applies to the net tree Signed-off-by: Neil Horman CC: "David S. Miller" CC: Eric Dumazet CC: Alexander Duyck Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 65968a9..ee38a41 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2467,7 +2467,7 @@ static inline struct page *__dev_alloc_pages(gfp_t gfp_mask, static inline struct page *dev_alloc_pages(unsigned int order) { - return __dev_alloc_pages(GFP_ATOMIC, order); + return __dev_alloc_pages(GFP_ATOMIC | __GFP_NOWARN, order); } /** @@ -2485,7 +2485,7 @@ static inline struct page *__dev_alloc_page(gfp_t gfp_mask) static inline struct page *dev_alloc_page(void) { - return __dev_alloc_page(GFP_ATOMIC); + return dev_alloc_pages(0); } /** -- cgit v1.1