From 73ea6ec66a9f6b81335e55ca642f25172c283b20 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 5 Jul 2014 06:09:18 +0900 Subject: ARM: EXYNOS: Fix the check for non-smp configuration Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c1..95cad25 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -297,7 +297,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); -- cgit v1.1 From 2fd82d33011479e4ee3b1df8ddaa561201fe145d Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 5 Jul 2014 06:31:31 +0900 Subject: ARM: dts: fix pwm-cells in pwm node for exynos4 pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426..17b22e9 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.1 From 89e6a13b88c8bf7ce1011a8a69113f22889f4585 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Sat, 5 Jul 2014 06:38:55 +0900 Subject: clocksource: exynos_mct: Fix ftrace In (93bfb76 clocksource: exynos_mct: register sched_clock callback) we supported using the MCT as a scheduler clock. We properly marked exynos4_read_sched_clock() as notrace. However, we then went and called another function that _wasn't_ notrace. That means if you do: cd /sys/kernel/debug/tracing/ echo function_graph > current_tracer You'll get a crash. Fix this (but still let other readers of the MCT be trace-enabled) by adding an extra function. It's important to keep other users of MCT traceable because the MCT is actually quite slow to access and we want exynos4_frc_read() to show up in ftrace profiles if it's the bottleneck. Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index f71d55f..5ce99c0 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -162,7 +162,7 @@ static void exynos4_mct_frc_start(void) exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } -static cycle_t exynos4_frc_read(struct clocksource *cs) +static cycle_t notrace _exynos4_frc_read(void) { unsigned int lo, hi; u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); @@ -176,6 +176,11 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static cycle_t exynos4_frc_read(struct clocksource *cs) +{ + return _exynos4_frc_read(); +} + static void exynos4_frc_resume(struct clocksource *cs) { exynos4_mct_frc_start(); @@ -192,7 +197,7 @@ struct clocksource mct_frc = { static u64 notrace exynos4_read_sched_clock(void) { - return exynos4_frc_read(&mct_frc); + return _exynos4_frc_read(); } static void __init exynos4_clocksource_init(void) -- cgit v1.1 From 8bf13a4346996b5a53d5f0c64b0914693c818fc2 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Sat, 5 Jul 2014 06:40:23 +0900 Subject: clocksource: exynos_mct: Register the timer for stable udelay This patch registers the exynos mct clocksource as the current timer as it has constant clock rate. This will generate correct udelay for the exynos platform and avoid using unnecessary calibrated jiffies. This change has been tested on exynos5420 based board and udelay is very close to expected. Without this patch udelay() on exynos5400 / exynos5800 is wildly inaccurate due to big.LITTLE not adjusting loops_per_jiffy correctly. Also without this patch udelay() on exynos5250 can be innacruate during transitions between frequencies < 800 MHz (you'll go 200 MHz -> 800 MHz -> 300 MHz and will run at 800 MHz for a time with the wrong loops_per_jiffy). [dianders: reworked and created version 3] Signed-off-by: Amit Daniel Kachhap Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 5ce99c0..ab51bf20a 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -200,10 +200,21 @@ static u64 notrace exynos4_read_sched_clock(void) return _exynos4_frc_read(); } +static struct delay_timer exynos4_delay_timer; + +static cycles_t exynos4_read_current_timer(void) +{ + return _exynos4_frc_read(); +} + static void __init exynos4_clocksource_init(void) { exynos4_mct_frc_start(); + exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer; + exynos4_delay_timer.freq = clk_rate; + register_current_timer_delay(&exynos4_delay_timer); + if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); -- cgit v1.1 From 35e75645f16c86918f26df1bfc2c24ad8ebb5a17 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Jul 2014 08:03:49 +0900 Subject: ARM: EXYNOS: Update secondary boot addr for secure mode Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat Signed-off-by: Tushar Behera Tested-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d23..e8797bb 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; -- cgit v1.1