| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: pm: avoid writing the auxillary control register for ARMv7
ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness
ARM: pm: arm920/926: fix number of registers saved
ARM: pm: CPU specific code should not overwrite r1 (v:p offset)
ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU
ARM: 7065/1: kexec: ensure new kernel is entered in ARM state
ARM: 7003/1: vexpress: Add clock definition for the SP805.
ARM: 7051/1: cpuimx* boards: fix mach-types errors
ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER
ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled
ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation.
ARM: 6967/1: ep93xx: ts72xx: fix board model detection
ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards
ARM: cache: detect VIPT aliasing I-cache on ARMv6
ARM: twd: register clockevents device before enabling PPI
ARM: realview: ensure visibility of writes during reset
ARM: perf: make name of arm_pmu_type consistent
ARM: perf: fix prototype of release_pmu
ARM: fix perf build with uclibc toolchains
|
| | |\ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
libio.h is not provided by uClibc, in order to be able to test the
definition of __UCLIBC__ we need to include stdlib.h, which also
includes stddef.h, providing the definition of 'NULL'.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Group event scheduling command line option is missing in perf
record/stat.
Add it to perf record/stat, which is same as in perf top.
Reported-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1313577727.2754.5.camel@hp6530s
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Upstream glibc commit 295e904 added a definition for __attribute_const__
to cdefs.h. This causes the following error when building perf:
util/include/linux/compiler.h:8:0: error: "__attribute_const__"
redefined [-Werror] /usr/include/sys/cdefs.h:226:0: note: this is the
location of the previous definition
Wrap __attribute_const__ in #ifndef as we do for __always_inline.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110818113720.GL2227@zod.bos.redhat.com
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There was a problem with the parse_events() code not printing the
correct event name when an event was unknown and starting with an 'r'.
The source of the problem was the way raw notation was parsed.
Without the patch:
$ perf stat -e retired_foo
invalid event modifier: 'tired_foo'
With the patch:
$ perf stat -e retired_foo
invalid or unsupported event: 'retired_foo'
This also covers the case where the name of the event was not printed at
all when perf was linked with libpfm4.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110723021043.GA20178@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When no event is given to perf record, perf top, a default event is
initialized (cycles). However, perf_evlist__add_default() was not
setting the symbolic name for the event. Perf top worked simply because
it was reconstructing the name from the event code. But it should not
have to do this. This patch initializes the evsel->name field properly.
This second version improves the code flow on the non error path.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110607161936.GA8163@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[committer note: Use perf_evsel__delete() instead of plain free()]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch fixes an issue with the exit value of perf list:
$ perf list; echo $?
129
perf list returns an error exit code even though there is no error.
There was a stray exit(129) in print_events(). This patch removes this
exit().
$ perf list; echo $?
0
$ perf list hw sw
cpu-cycles OR cycles [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
instructions [Hardware event]
cache-references [Hardware event]
cache-misses [Hardware event]
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cpu-clock [Software event]
task-clock [Software event]
page-faults OR faults [Software event]
minor-faults [Software event]
major-faults [Software event]
context-switches OR cs [Software event]
cpu-migrations OR migrations [Software event]
alignment-faults [Software event]
emulation-faults [Software event]
$ echo $?
0
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110523123917.GA31060@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| |\ \ \
| |/ /
|/| |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
With gcc4.6, some instances of concrete inlined function looks redundant
and broken, because it appears inside of a concrete instance and its
call_file and call_line are same as the original abstruct's decl_file
and decl_line respectively.
e.g.
[ d1aa] subprogram
external (flag) Yes
name (strp) "add_timer"
decl_file (data1) 2 ;here is original
decl_line (data2) 847 ;line and file
prototyped (flag) Yes
inline (data1) inlined (1)
sibling (ref4) [ d1c6]
...
[ 11d84] subprogram
abstract_origin (ref4) [ d1aa] ; concrete instance
low_pc (addr) .text+0x000000000000246f <add_timer>
high_pc (addr) .text+0x000000000000248b <mod_timer_pending>
frame_base (block1) [ 0] call_frame_cfa
sibling (ref4) [ 11dd9]
[ 11d9f] formal_parameter
abstract_origin (ref4) [ d1b9]
location (data4) location list [ 701b]
[ 11da8] inlined_subroutine
abstract_origin (ref4) [ d1aa] ; redundant instance
low_pc (addr) .text+0x000000000000247e <add_timer+0xf>
high_pc (addr) .text+0x0000000000002480 <add_timer+0x11>
call_file (data1) 2 ; call line and file
call_line (data2) 847 ; are same as above
Those redundant instances leads unwilling results;
e.g. find probe points inside of functions even if we specify
a function entry as below;
$ perf probe -V add_timer
Available variables at add_timer
@<add_timer+0>
struct timer_list* timer
@<add_timer+15>
(No matched variables)
So, this filters out those redundant instances based on call-site and
decl-site information.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110317.19900.59525.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
gcc 4.6 generates a concrete out-of-line instance when there is a
function which is implicitly inlined somewhere but also has its own
instance. The concrete out-of-line instance means that it has an
abstract origin of the function which is referred by not only
inlined-subroutines but also a concrete subprogram.
Since current dwarf_func_inline_instances() can find only instances of
inlined-subroutines, this introduces new die_walk_instances() to find
both of subprogram and inlined-subroutines.
e.g. without this,
Available variables at sched_group_rt_period
@<cpu_rt_period_read_uint+9>
struct task_group* tg
perf probe failed to find actual subprogram instance of
sched_group_rt_period().
With this,
Available variables at sched_group_rt_period
@<cpu_rt_period_read_uint+9>
struct task_group* tg
@<sched_group_rt_period+0>
struct task_group* tg
Now it found the sched_group_rt_period() itself.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110311.19900.63997.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix variable searching logic to search one in inner than local scope or
global(CU) scope. In the other words, skip searching in intermediate
scopes.
e.g., in the following code,
int var1;
void inline infunc(int i)
{
i++; <--- [A]
}
void func(void)
{
int var1, var2;
infunc(var2);
}
At [A], "var1" should point the global variable "var1", however, if user
mis-typed as "var2", variable search should be failed. However, current
logic searches variable infunc() scope, global scope, and then func()
scope. Thus, it can find "var2" variable in func() scope. This may not
be what user expects.
So, it would better not search outer scopes except outermost (compile
unit) scope which contains only global variables, when it failed to find
given variable in local scope.
E.g.
Without this:
$ perf probe -V pre_schedule --externs > without.vars
With this:
$ perf probe -V pre_schedule --externs > with.vars
Check the diff:
$ diff without.vars with.vars
88d87
< int cpu
133d131
< long unsigned int* switch_count
These vars are actually in the scope of schedule(), the caller of
pre_schedule().
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110305.19900.94374.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix perf probe to search local variables in appropriate local inlined
function scope. For example, pre_schedule() has only 2 local variables,
as below;
$ perf probe -L pre_schedule
<pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0>
0 static inline void pre_schedule(struct rq *rq, struct task_struct *prev)
{
2 if (prev->sched_class->pre_schedule)
3 prev->sched_class->pre_schedule(rq, prev);
}
However, current perf probe shows 4 local variables on pre_schedule(),
because it searches variables in the caller(schedule()) scope.
$ perf probe -V pre_schedule
Available variables at pre_schedule
@<schedule+445>
int cpu
long unsigned int* switch_count
struct rq* rq
struct task_struct* prev
This patch fixes this issue by searching variables in the local scope of
the instance of inlined function. Here is the result.
$ perf probe -V pre_schedule
Available variables at pre_schedule
@<schedule+445>
struct rq* rq
struct task_struct* prev
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110259.19900.85664.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Check multiple --lines option and print warning informing that only the
first specified --line option is valid.
Changes from the 1st post:
- Accept only the first option instead of the last.
- Fix warning message according to David's comment.
- Mark as a bugfix.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110253.19900.96192.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix line-range collector to walk all instances of inlined function,
because some execution paths can be optimized out depending on the
function argument of instances.
E.g.)
inline_func (arg) {
if (arg)
do_something;
else
do_another;
}
func_A() {
inline_func(1)
}
func_B() {
inline_func(0)
}
In this case, func_A may have only do_something code and func_B may have
only do_another.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110247.19900.93702.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix perf probe to walk through the lines of all nested inlined function
call sites and declared lines when a whole CU is passed to the line
walker.
The die_walk_lines() can have two different type of DIEs, subprogram (or
inlined-subroutine) DIE and CU DIE.
If a caller passes a subprogram DIE, this means that the walker walk on
lines of given subprogram. In this case, it just needs to search on
direct children of DIE tree for finding call-site information of inlined
function which directly called from given subprogram.
On the other hand, if a caller passes a CU DIE to the walker, this means
that the walker have to walk on all lines in the source files included
in given CU DIE. In this case, it has to search whole DIE trees of all
subprograms to find the call-site information of all nested inlined
functions.
Without this patch:
$ perf probe --line kernel/cpu.c:151-157
</home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151>
static int cpu_notify(unsigned long val, void *v)
{
154 return __cpu_notify(val, v, -1, NULL);
}
With this:
$ perf probe --line kernel/cpu.c:151-157
</home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151>
152 static int cpu_notify(unsigned long val, void *v)
{
154 return __cpu_notify(val, v, -1, NULL);
}
As you can see, --line option with source line range shows the declared
lines as probe-able.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110241.19900.34994.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix line walker to check whether a given DIE is CU or not.
Actually this function accepts CU, subprogram and inlined_subroutine
DIEs.
Without this fix, perf probe always fails to analyze lines on inlined
functions;
$ perf probe -L pre_schedule
Debuginfo analysis failed. (-2)
Error: Failed to show lines. (-2)
This fixes that bug, as below.
$ perf probe -L pre_schedule
<pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0>
0 static inline void pre_schedule(struct rq *rq, struct task_struct *prev
{
2 if (prev->sched_class->pre_schedule)
3 prev->sched_class->pre_schedule(rq, prev);
}
/* rq->lock is NOT held, but preemption is disabled */
Changes from v1:
- Update against current tip tree.(Fix dwarf-aux.c)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110235.19900.20614.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix a memory leak for scopes array when it finds a variable in the
global scope.
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110229.19900.63019.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
A file in /tmp/ might be a symlink, so lstat() should be used instead of
stat().
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110811205537.GA22864@albatros
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If we bring the recorded perf data together with kernel binary from another
machine using:
on server A:
perf archive
on server B:
tar xjvf perf.data.tar.bz2 -C ~/.debug
the build_id kernel dso is not properly recognized during the "perf report"
command on server B.
The reason is, that build_id dsos are added during the session initialization,
while the kernel maps are created during the sample event processing.
The machine__create_kernel_maps functions ends up creating new dso object for
kernel, but it does not check if we already have one added by build_id
processing.
Also the build_id reading ABI quirk added in commit:
- commit b25114817a73bbd2b84ce9dba02ee1ef8989a947
perf build-id: Add quirk to deal with perf.data file format breakage
populates the "struct build_id_event::pid" with 0, which
is later interpreted as DEFAULT_GUEST_KERNEL_ID.
This is not always correct, so it's better to guess the pid
value based on the "struct build_id_event::header::misc" value.
- Tested with data generated on x86 kernel version v2.6.34
and reported back on x86_64 current kernel.
- Not tested for guest kernel case.
Note the problem stays for PERF_RECORD_MMAP events recorded by perf that
does not use proper pid (HOST_KERNEL_ID/DEFAULT_GUEST_KERNEL_ID). They are
misinterpreted within the current perf code. Probably there's not much we
can do about that.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20110601194346.GB1934@jolsa.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
It will be immediately replaced in perf_top_browser__run.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q7e2jzb44elqpkvdllk94x0i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| |\ \ \
| |/ /
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The external symbol files are generated by JIT compilers, for example, but we
need to make sure they're ours before injecting them to 'perf report'.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1312919658-17158-1-git-send-email-penberg@kernel.org
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The 'perf sched' command usage still showing 'trace' command instead of
the 'script' command.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110809124651.GD2056@jolsa.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The session object is released prematurely when processing events for
latency command. The session's thread objects are used within the
output_lat_thread function.
Runnning following commands:
# perf sched record
# perf sched latency
the latter displays incorrect data and might cause access violation.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312837414-3819-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Just like we do already for perf.data files.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Ohm <chr.ohm@gmx.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgokmxsmvppwpc5404qhyk7e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| |\ \ \
| |/ /
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Adding install-python_ext target to install python extension related
files. Installation directory is governed by python distutils package
and follows the DESTDIR variable settings.
Also moving python extension build output into '$(O)python_ext_build'
directory and making it configurable via PYTHON_EXTBUILD variable.
Keeping the '$(O)python/perf.so' file, so it could be used for testing
as of until now.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110722113307.GA1931@jolsa.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In addition to /etc/perfconfig and $HOME/.perfconfig, perf looks for
configuration in the file ./config, imitating git which looks at
$GIT_DIR/config. If ./config is not a perf configuration file, it
fails, or worse, treats it as a configuration file and changes behavior
in some unexpected way.
"config" is not an unusual name for a file to be lying around and perf
does not have a private directory dedicated for its own use, so let's
just stop looking for configuration in the cwd. Callers needing
context-sensitive configuration can use the PERF_CONFIG environment
variable.
Requested-by: Christian Ohm <chr.ohm@gmx.net>
Cc: 632923@bugs.debian.org
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Ohm <chr.ohm@gmx.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110805165838.GA7237@elie.gateway.2wire.net
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use LIB_OBJS and BUILTIN_OBJS for .o files.
LIB_FILE is already prefixed with OUTPUT.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110807083932.9C0E514C03B@msa103.auone-net.jp
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Looks to me like the :r modifier is not supported anymore, so remove it
from the list of events. Without this fix 'perf lock record' doesn't
work.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhu Yanhai <gaoyang.zyh@taobao.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312035232-9534-1-git-send-email-gaoyang.zyh@taobao.com
Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
perf will coredump if the user doesn't give the "-m" option in probe
command, this patch fixes it.
[root@localhost perf]# ./perf probe --add='PROBE'
Segmentation fault (core dumped)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311602888-2389-1-git-send-email-bookjovi@gmail.com
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| |\ \ \
| |/ /
| | /
| |/
|/| |
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
So that we get a proper warning in the TUI in cases like:
$ perf report --stdio -g fractal,0.5,caller --sort pid
Selected -g but no callchain data. Did you call 'perf record' without -g?
$
The --stdio case is ok because it uses fprintf, ui__warning is needed to
figure out if --stdio or --tui is being used.
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Liao <phyomh@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ag9fz2wd17mbbfjsbznq1wms@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
So those friggin "spurious" PERF_RECORD_MMAP events were actually a
brain fart copy'n'paste error in the python binding, doh. I.e. they
weren't MMAPs, just SAMPLEs.
Fix it by providing routines for these events instead of using the MMAP
ones.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b0rc8y5jd03f9f11kftodvkm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To remove the last case of access to the FD() macro outside the library.
Inspired by a patch by Borislav that moved the FD() macro to util.h, for
namespace concerns I rather preferred to constrain it to ev{sel,list}.c.
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qn893qsstcg366tkucu649qj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The readlink() function doesn't append a null byte to buf. So we should
zero out buf with zalloc(). Or we'll see sometimes error like this:
[root@intel-s3e36-01]~# /usr/bin/perf buildid-cache -a /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko -v
Adding f64ba8efd5f53c7ad332fc17db1d21de309038e1 /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko: Ok
[root@intel-s3e36-01]~# /usr/bin/perf buildid-cache -r /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko -v
Removing f64ba8efd5f53c7ad332fc17db1d21de309038e1 /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko: FAIL
/lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko wasn't in the cache
The change in build_id_cache__add_s() is a defense.
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20110718031314.GA5802@hpt.nay.redhat.com
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
| | | | |
| | \ | |
| | \ | |
| | \ | |
| |\ \ \ \
| |_|_|/
|/| | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM
* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Remove unused CHECK_IRQ_PER_CPU()
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools, x86: Fix 32-bit compile on 64-bit system
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Builds for 32-bit perf binaries on a 64-bit host currently fail
with this error:
[...]
bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:
bench/../../../arch/x86/lib/memcpy_64.S:29: Error: bad register name `%rdi'
bench/../../../arch/x86/lib/memcpy_64.S:34: Error: invalid instruction suffix for `movs'
bench/../../../arch/x86/lib/memcpy_64.S:50: Error: bad register name `%rdi'
bench/../../../arch/x86/lib/memcpy_64.S:61: Error: bad register name `%rdi'
...
The problem is the detection of the host arch without considering passed in
flags. This change fixes 32-bit builds via:
make EXTRA_CFLAGS=-m32
and 64-bit builds still reference the memcpy_64.S.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1310420304-21452-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use preset debugfs path instead of hardcoded one.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-4-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Adding builtin test for parse_events function, which is
responsible for parsing/processing "-e" option for
stat/top/record commands.
This new test will run within the builtin test command suite
(perf test).
One or several tests were added for each type of event.
More tests could be added easily if needed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Moving out the option parameter from parse_events function,
and adding new parse_events_option function instead.
The option parameter is used only to carry "struct perf_evlist"
pointer for chaining new events. Putting it away, enable us
to call parse_events from other places without using the
option parameter.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Non-callchain path is using al.addr which prints as:
openssl 14564 17672.003587: 7862d _x86_64_AES_encrypt_compact
This should be sample->ip to print as:
openssl 14564 17672.003587: 3f7867862d _x86_64_AES_encrypt_compact
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@ghostprotocols.net
Cc: peterz@infradead.org
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1306768587-15376-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The perf_event_attr struct has two __u32's at the top and
they need to be swapped individually.
With this change I was able to analyze a perf.data collected in a
32-bit PPC VM on an x86 system. I tested both 32-bit and 64-bit
binaries for the Intel analysis side; both read the PPC perf.data
file correctly.
-v2:
- changed the existing perf_event__attr_swap() to swap only elements
of perf_event_attr and exported it for use in swapping the
attributes in the file header
- updated swap_ops used for processing events
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@ghostprotocols.net
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1310754849-12474-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add "node" as a simple alias for NODE cache events.
The addition of NODE cache events broke the parse_alias
function, so any mismatched event caused the segfault, like:
# ./perf stat -e krava ls
The hw_cache/hw_cache_op/hw_cache_result arrays needs to follow
PERF_COUNT_HW_CACHE_*MAX enums. Adding those MAXs to be size
of those arrays, so possible ommision in future wil not lead to
segfault.
Adding read/write/prefetch as allowed operations for node cache
event.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/20110713205818.GB7827@jolsa.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Support adding probes on offline kernel modules. This enables
perf-probe to trace kernel-module init functions via perf-probe.
If user gives the path of module with -m option, perf-probe
expects the module is offline.
This feature works with --add, --funcs, and --vars.
E.g)
# perf probe -m /lib/modules/`uname -r`/kernel/fs/btrfs/btrfs.ko \
-a "extent_io_init:5 extent_state_cache"
Add new events:
probe:extent_io_init (on extent_io_init:5 with extent_state_cache)
probe:extent_io_init_1 (on extent_io_init:5 with extent_state_cache)
You can now use it on all perf tools, such as:
perf record -e probe:extent_io_init_1 -aR sleep 1
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072751.6528.10230.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add probed module name and ":" in front of function name
if -m module option is given. In the result, the symbol
name passed to kprobe-tracer becomes MODULE:FUNCTION,
so that kallsyms can solve it as a symbol in the module
correctly.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072745.6528.26416.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Introduce debuginfo to encapsulate dwarf information.
This new object allows us to reuse and expand debuginfo easily.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072739.6528.12438.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move dwarf library related routines to dwarf-aux.{c,h}.
This includes several minor changes.
- Add simple documents for each API.
- Rename die_find_real_subprogram() to die_find_realfunc()
- Rename line_walk_handler_t to line_walk_callback_t.
- Minor cleanups.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072727.6528.57647.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Since there are dwarf_bitsize, dwarf_bitoffset and dwarf_bytesize
defined in libdw, we don't need die_get_bit_size, die_get_bit_offset
and die_get_byte_size anymore.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072721.6528.2747.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
