| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.18
This is a very big update, mainly due to a huge set of new drivers some
of which are individually very large. We also have a lot of fixes for
the topology stuff, several of the users have stepped up and fixed some
the serious issues there, and continued progress on the transition away
from CODEC specific drivers to generic component drivers.
- Many fixes for the topology code, including fixes for the half done
v4 ABI compatibility from Guenter Roeck and other ABI fixes from
Kirill Marinushkin.
- Lots of cleanup for Intel platforms based on Realtek CODECs from Hans
de Goode.
- More followups on removing legacy CODEC things and transitioning to
components from Morimoto-san.
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver.
- A series of fixes and updates to the rather elderly Cirrus Logic SoC
drivers from Alexander Sverdlin.
- Qualcomm DSP support from Srinivas Kandagatla.
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and
RT5668 and TI TSCS454
|
| | |\ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add the use_single_rw flag to regmap config since the
device does not support bulk transactions over i2c.
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Currently, the check that ret_val is not -ENOENT is always true and
the quirk bit BYT_RY5651_MCLK_EN is never being cleared because ret_val
is always zero at this point from a previous assignment earlier on.
I believe that ret_val should actually be assigned to the return from
devm_clk_get() as this can return -ENOENT (from a deeper call to
clk_get_sys) and that was the original intention to check this.
Detected by CoverityScan, CID#1460228 ("Logically dead code")
Fixes: 02c0a3b3047f ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
dapm_kcontrol_data is freed as part of dapm_kcontrol_free(), leaving the
paths pointer dangling in the list.
This leads to system crash when we try to unload and reload sound card.
I hit this bug during ADSP crash/reboot test case on Dragon board DB410c.
Without this patch, on SLAB Poisoning enabled build, kernel crashes with
"BUG kmalloc-128 (Tainted: G W ): Poison overwritten"
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
skl-tplg-interface.h describes firmware format details for Skylake
topology files. It is part of the ABI and should reside in the uapi
directory.
While moving the file, also replace the license boilerplate with
the SPDX License Identifier.
No functional change.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Topology manifest v4 is still part of the ABI. Move its data structures
into the uapi header file.
No functional change.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit dc31e741db49 ("ASoC: topology: ABI - Add the types for BE
DAI") introduced sound topology files version 5. Initially, this
change made the topology code incompatible with v4 topology files.
Backwards compatibility with v4 configuration files was
subsequently added with commit 288b8da7e992 ("ASoC: topology:
Support topology file of ABI v4").
Unfortunately, backwards compatibility was never fully implemented.
First, the manifest size in (Skylake) v4 configuration files is set
to 0, which causes manifest_new_ver() to bail out with error messages
similar to the following.
snd_soc_skl 0000:00:1f.3: ASoC: invalid manifest size
snd_soc_skl 0000:00:1f.3: tplg component load failed-22
snd_soc_skl 0000:00:1f.3: Failed to init topology!
snd_soc_skl 0000:00:1f.3: ASoC: failed to probe component -22
skl_n88l25_m98357a skl_n88l25_m98357a: ASoC: failed to instantiate card -22
skl_n88l25_m98357a: probe of skl_n88l25_m98357a failed with error -22
After this problem is fixed, the following error message is seen instead.
snd_soc_skl 0000:00:1f.3: ASoC: old version of manifest
snd_soc_skl 0000:00:1f.3: Invalid descriptor token 1093938482
snd_soc_skl 0000:00:1f.3: ASoC: failed to load widget media0_in cpr 0
snd_soc_skl 0000:00:1f.3: tPlg component load failed-22
This message is seen because backwards compatibility for loading widgets
was never implemented.
The lack of audio support when running the upstream kernel on recent
Chromebooks has been reported in various forums, and can be traced back
to this problem. Attempts to fix the problem, usually by providing v5
configuration files, were only partially successful.
Let's implement backward compatibility properly to solve the problem
for good.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Currently there is no support for Tempo Semiconductor's TSCS454 CODEC.
Add support for it.
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On APL, commit fd0f237572ad
("ASoC: Intel: bxt: Move codec sysclk config to codec_init function")
fixed an issue related to jack detection.
The MCLK for DA7219 does not change in this platform, but is
currently being configured everytime as part of the platform_clock
event handler for DAPM. The upshot of this is that we have
unnecessary calls to this function, and it also means that if
a stream hasn't yet been started, DA7219 driver does not have the
correct MCLK rates programmed and so the HP detection feature does
not operate as expected.
The same fix is needed on KBL.
This patch rectifies this issue by moving the sysclk call to
codec_init function so it's only called once at initialisation.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The simple-card driver currently accepts a clock node in the cpu dai
sub-node and only uses it as an alternative to the
'system-clock-frequency' property to get the current frequency.
This patch adds another use of the passed clock node. If mclk-fs is
specified, the clocks in cpu and codec dai sub-nodes will be set to
the calculated rate (stream rate * mclk_fs) in hw_params.
This allows platforms to pass tuneable clocks as phandle that will
automatically be set to the right rates.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
match_string() returns the index of an array for a matching string,
which can be used instead of open coded variant.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
match_string() returns the index of an array for a matching string,
which can be used instead of open coded variant.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
match_string() returns the index of an array for a matching string,
which can be used instead of open coded variant.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Many X86 devices using a BYT SoC + RT5651 codec are cheap devices with
generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a
long_name, making it impossible for userspace to have a correct UCM
profile which knowns which input is connected to the internal mic,
which input is connected to the hsmic (for correct jack-based switching)
and which inputs are unused.
Our quirks already specify which inputs the internal and headset mic
are connected to.
This commit sets a long_name based on the quirks so that userspace can
have UCM profiles doing the right thing based on the long_name.
Note that if we ever encounter the need for a special UCM profile for
some device we can add a quirk to set a specific long_name for the
device,
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | | |
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
add path for hosltess lpbk from ADDA Capture to ADDA Playback
add path for hostless phone call between ADDA DAI and PCM DAI
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | | |
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The new mt6797-afe driver uses some functions in a common file, which
works for a built-in driver but fails for a loadable module:
ERROR: "mtk_afe_pcm_free" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined!
ERROR: "mtk_afe_add_sub_dai_control" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined!
ERROR: "mtk_afe_pcm_new" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined!
ERROR: "mtk_afe_combine_sub_dai" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined!
ERROR: "mtk_afe_pcm_ops" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined!
This exports the five symbols above for modules.
Fixes: b3c702f56bf5 ("ASoC: mt6797: combine DAI to register component")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When CONFIG_GPIOLIB is disabled, this codec fails to build
because gpio/consumer.h is not included implicitly.
sound/soc/codecs/pcm1789.c: In function 'pcm1789_common_init':
sound/soc/codecs/pcm1789.c:247:19: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_gpio_request_one'? [-Werror=implicit-function-declaration]
pcm1789->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4ae340d1be36 ("ASoC: codecs: Add support for PCM1789")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When the call to hw_params for a component fails, the error code is held
by the variable '__ret' but the error message displays the value held by
the variable 'ret'. Fix the return code shown when hw_params fails for
a component.
Fixes: b8135864d4d3 ("ASoC: snd_soc_component_driver has snd_pcm_ops")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support for the Atmel I2S controller embedded into
sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds TX and RX TDM mixers for 40 TDM ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
All the mixer controls are pretty much same from all the afe ports.
Make these as proper macros for 2 reasons.
1> To avoid any typos in adding new mixer controls for each port.
2> Easy to edit from single place, easy to add new ports
This also prepares the routing driver to accomdate 40 tdm dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to 40 TDM ports supported in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use common q6afe_dai_prepare() for MI2S dais, this will remove
some code duplication. Also make the if statement to switch to
make the code look neater.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to tdm ports in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We should set BE symmetric constraint on FE substream.
in case one BE is used by two FE1/FE2,
the first BE runtime will use FE1's substream->runtime.
hence the FE1's will be constrained by BE symmetry property.
Though, second FE2 call dpcm_apply_symmetry,
the be_substream->runtime == FE1's substream->runtime.
The FE2's substream->runtime will not be constrained
by BE's symmetry property.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In case, one BE is used by two FE1/FE2
FE1--->BE-->
|
FE2----]
when FE1/FE2 call dpcm_be_dai_hw_free() together
the BE users will be 2 (> 1), hence cannot be hw_free
the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP
later FE1/FE2 call dpcm_be_dai_shutdown(),
will be skip due to wrong state.
leaving the BE not being hw_free and shutdown.
The BE dai will be hw_free later when calling
dpcm_be_dai_shutdown() if still in invalid state.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
channel 1: SYSMEM<->ACP
channel 2: ACP<->I2S
Instead of waiting on period interrupt of ch 2 and then starting
dma on ch1, we make ch1 dma as circular.
This removes dependency of period granularity on hw pointer.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add a quirk for the ARCHOS 80 Cesium 8" windows tablet, this device mostly
works with the default settings, except that it has only one speaker.
So add a quirk with the default settings + the mono-speaker flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | | |
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | | |
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In MediaTek SoC chip we have multiple DAI,
such as I2S, ADDA, PCM, etc.
Organize each DAI in to one sub dai,
with its dai driver, controls, widgets, routes.
add mtk_afe_combine_sub_dai() to combine
dai driver from each DAI.
add mtk_afe_add_sub_dai_control() to register
the control, widget, routes to component.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The newly introduced driver causes a harmless Kconfig warning when
compile-testing random configurations:
WARNING: unmet direct dependencies detected for SND_SDMA_SOC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && DMA_OMAP [=n]
Selected by [y]:
- SND_OMAP_SOC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (ARCH_OMAP [=y] && DMA_OMAP [=n] || ARM [=y] && COMPILE_TEST [=y])
By simply allow build testing without DMA_OMAP, we can shut up that warning.
Fixes: dde637f2daf1 ("ASoC: omap: Introduce the generic_dmaengine_pcm based sdma-pcm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The nau8824 codec can detect whether a headset or plain headphones is
inserted (as well as button presses on the headset) as such the jack_type
passed to snd_soc_card_jack_new() should include SND_JACK_MICROPHONE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
FOr platforms that use the simple-card driver, the codec cannot be selected
through 'select' magic in Kconfig. So turn this into a real config option.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This is needed when the codec is instanciated from from a device tree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There's no need to read the register again prior to writing it, we did
that in the beginning of the function.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The pxa-ssp driver currently assumes that .set_fmt() is called before
.set_clkdiv(), .set_pll() etc.
Commit a8bd0ee558714 ("ASoC: raumfeld: Use static DAI format setup") broke
support for Raumfeld hardware (and possible other PXA based ones) because
it effectively changed the order of these calls. Also, as the call to
.set_fmt() is now done at probe time, the port clock is not yet enabled.
To fix this, strip all hardware register access code from the .set_fmt()
callback and memorize the desired value, so we can use it from the
.hw_params() callback. Also make the .set_fmt() callback less destructive
by reading all registers that it writes to in the beginning and only
masking out the bits that it possibly fiddles with.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to DB820c machine driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to q6afe backend dais driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch add support to MI2S mixers required to select path between
ASM stream and AFE ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to SLIMBus related mixers to control mux between
ASM stream and AFE port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.
This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds support to memory map and unmap regions commands in
q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.
This patch adds support to basic features to allow hdmi playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
