summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Fix build without CONFIG_PMTakashi Iwai2012-11-241-2/+4
| | | | | | | I forgot this again... codec->in_pm is in #ifdef CONFIG_PM Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: properly initialize the sync endpointDaniel Mack2012-11-221-1/+1
| | | | | | | | | | | Jeffrey Barish reported an obvious bug in the pcm part of the usb-audio driver which causes the code to not initialize the sync endpoint from configure_endpoint(). Reported-by: Jeffrey Barish <jeff_barish@earthlink.net> Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Cirrus: Correctly clear line_out_pins when moving to speakerDavid Henningsson2012-11-211-0/+1
| | | | | | | | | | | If this array is not cleared, the jack related code later might fail to create "Internal Speaker Phantom Jack" on Dell Inspiron 3420 and Dell Vostro 2420. BugLink: https://bugs.launchpad.net/bugs/1076840 Cc: stable@vger.kernel.org (3.6+) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add support for Realtek ALC292David Henningsson2012-11-211-0/+1
| | | | | | | | | | | We found a new codec ID 292, and that just a simple quirk would enable sound output/input on this ALC292 chip. BugLink: https://bugs.launchpad.net/bugs/1081466 Cc: stable@vger.kernel.org Tested-by: Acelan Kao <acelan.kao@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-3.7' of ↵Takashi Iwai2012-11-215-51/+45
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.7 The biggest batch of fixes here is the Kirkwood DMA fixes, plus a couple of other small fixes.
| *---. Merge branches 'fix/arizona', 'fix/cs4271', 'fix/kirkwood' and 'fix/samsung' ↵Mark Brown2012-11-2147-199/+468
| |\ \ \ | | | | | | | | | | | | | | | of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into tmp
| | | | * ASoC: bells: Fix up git patch application failureMark Brown2012-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems git has been getting confused by the very similar contexts for the speaker DAIs and has been applying patches to the wrong places causing all sorts of confusion. Fix this up by hand. Reported-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | * | ASoC: kirkwood-i2s: more pause-mode fixesRussell King2012-11-211-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't even momentarily set the pause status when starting the channel; if we do, we should check the busy bit to ensure that we comply with the spec. In any case, it isn't necessary; we will not active on a START event so there is no need to pause the DMA. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | * | ASoC: kirkwood-i2s: fix DMA underrunsRussell King2012-11-211-29/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stress testing the driver with multiple start/stop events causes kirkwood-dma to report underrun errors (which used to cause the kernel to lock up solidly). This is because kirkwood-i2s is not respecting the restrictions imposed on clearing the 'pause' bit. Follow what the spec says; the busy bit must be read as being clear twice before the pause bit can be released. This solves the underruns. However, it has been noticed that the busy bit occasionally does not clear itself, hence the waiting is bounded to 5ms maximum to avoid a new reason for the kernel to lockup. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | * | ASoC: kirkwood-i2s: fix DCO lock detectionRussell King2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is part of a patch found in Rabeeh Khoury's git tree for the cubox, which is further attributed to Sebastian Hesselbrath. Rather than masking the KIRKWOOD_DCO_SPCR_STATUS register contents against the registers virtual address, let's actually use the bit definition for the locked status, as required in the documentation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | * | ASoC: kirkwood-dma: don't ignore other irq causes on errorRussell King2012-11-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ignoring the real cause of the interrupt is not a good idea; this behaviour has been observed to bring Dove platforms to silently lockup. Instead, on error fall through to the normal interrupt processing. This is especially important on Dove platforms as errors are handled separately, and allows us to clear down the real cause of the interrupt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | * | ASoC: kirkwood-dma: fix use of virt_to_phys()Russell King2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is part of a patch found in Rabeeh Khoury's git tree for the cubox. You can not use virt_to_phys() on the address returned from dma_alloc_coherent(); it may not be part of the kernel direct-mapped memory. Fix this to use the DMA address instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | ASoC: cs4271: free allocated GPIODaniel Mack2012-11-131-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of probe deferral, the allocated GPIO line is not freed, which prevents it from being claimed and properly asserted in later attempts. Fix this by using devm_gpio_request(). Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Michael Hirsch <hirsch@teufel.de> Cc: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | | ASoC: arizona: Fix typo - Swap value in 48k_rates[] and 44k1_rates[]Dimitris Papastamos2012-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* | | | | ALSA: hda - Limit runtime PM support only to known Intel chipsTakashi Iwai2012-11-191-19/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've got a report that the runtime PM may make the codec the unresponsive on AMD platforms. Since the feature has been tested only on the recent Intel platforms, it's safer to limit the support to such devices for now. This patch adds a new DCAPS bit flag indicating the runtime PM support, and mark it for Intel controllers. Reported-and-tested-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: hda - Fix recursive suspend/resume callTakashi Iwai2012-11-192-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the bus reset is performed during the suspend/resume (including the power-saving too), it calls snd_hda_suspend() and snd_hda_resume() again, and deadlocks eventually. For avoiding the recursive call, add a new flag indicating that the PM is being performed, and don't go to the bus reset mode when it's on. Reported-and-tested-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | Merge branch 'usb-midi-fix-3.7' of git://git.alsa-project.org/alsa-kprivate ↵Takashi Iwai2012-11-191-2/+6
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | into for-linus Merge a regression fix for USB MIDI on non-standard usb-audio drivers by Clemens.
| * | | | ALSA: ua101, usx2y: fix broken MIDI outputClemens Ladisch2012-11-181-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 88a8516a2128 (ALSA: usbaudio: implement USB autosuspend) added autosuspend code to all files making up the snd-usb-audio driver. However, midi.c is part of snd-usb-lib and is also used by other drivers, not all of which support autosuspend. Thus, calls to usb_autopm_get_interface() could fail, and this unexpected error would result in the MIDI output being completely unusable. Make it work by ignoring the error that is expected with drivers that do not support autosuspend. Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Reported-by: Devin Venable <venable.devin@gmail.com> Reported-by: Dr Nick Bailey <nicholas.bailey@glasgow.ac.uk> Reported-by: Jannis Achstetter <jannis_achstetter@web.de> Reported-by: Rui Nuno Capela <rncbc@rncbc.org> Cc: Oliver Neukum <oliver@neukum.org> Cc: 2.6.39+ <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* | | | | ALSA: usb-audio: Fix mutex deadlock at disconnectionTakashi Iwai2012-11-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change for USB-audio disconnection race fixes introduced a mutex deadlock again. There is a circular dependency between chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a device is opened during the disconnection operation: A. snd_usb_audio_disconnect() -> card.c::register_mutex -> chip->shutdown_rwsem (write) -> snd_card_disconnect() -> pcm.c::register_mutex -> pcm->open_mutex B. snd_pcm_open() -> pcm->open_mutex -> snd_usb_pcm_open() -> chip->shutdown_rwsem (read) Since the chip->shutdown_rwsem protection in the case A is required only for turning on the chip->shutdown flag and it doesn't have to be taken for the whole operation, we can reduce its window in snd_usb_audio_disconnect(). Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: fm801: precedence bug in snd_fm801_tea575x_get_pins()Dan Carpenter2012-11-141-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a precedence bug because | has higher precedence than ?:. This code was cut and pasted and I fixed a similar bug a few days ago. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: es1968: precedence bug in snd_es1968_tea575x_get_pins()Dan Carpenter2012-11-131-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't think this works as intended. '|' higher precedence than ?: so the bitwize OR "0 | (val & STR_MOST)" is a no-op. I have re-written it to be more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | Merge tag 'asoc-3.7' of ↵Takashi Iwai2012-11-138-12/+573
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.7 A few small fixes plus a large but simple change for WM5102 which writes out a bunch of register updates to the device when we enable the clock as recommended following chip evaluation.
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| *---------. \ \ \ \ Merge branches 'fix/arizona', 'fix/core', 'fix/cs42l52', 'fix/mxs', ↵Mark Brown2012-11-138-12/+573
| |\ \ \ \ \ \ \ \ \ \ | | | |_|_|_|_|_|/ / / | | |/| | | | | | / / | | |_|_|_|_|_|_|/ / | |/| | | | | | | / | | | | | | | |_|/ | | | | | | |/| | 'fix/samsung' and 'fix/wm8978' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into tmp
| | | | | | | * | ASoC: wm8978: pll incorrectly configured when codec is masterEric Millbrandt2012-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When MCLK is supplied externally and BCLK and LRC are configured as outputs (codec is master), the PLL values are only calculated correctly on the first transmission. On subsequent transmissions, at differenct sample rates, the wrong PLL values are used. Test for f_opclk instead of f_pllout to determine if the PLL values are needed. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | | | | | * | | ASoC: bells: Correct type in sub speaker DAI name for WM5102Charles Keepax2012-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | | | | * | | ASoC: bells: Select WM1250-EV1 Springbank audio I/O moduleDimitris Papastamos2012-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure we select the WM1250-EV1 as the current software system configuration demands it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | | | | * | | ASoC: bells: Add missing select of WM0010Dimitris Papastamos2012-11-021-0/+1
| | | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | | | * | | ASoC: mxs-saif: Fix channel swap for 24-bit formatFabio Estevam2012-11-021-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Playing 24-bit format file leads to channel swap on mx28 and the reason is that the current driver performs one write/read to/from the SAIF_DATA register to trigger the transfer. This approach works fine for S16_LE case because SAIF_DATA is a 32-bit register and thus is capable of storing the 16-bit left and right channels, but for the S24_LE case it can only store one channel, so in order to not lose the FIFO sync an extra read/write is needed. Reported-by: Dan Winner <DWinner@tc-helicon.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Dan Winner <DWinner@tc-helicon.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | | | * | | ASoC: mxs-saif: Add MODULE_ALIASFabio Estevam2012-11-011-0/+1
| | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MODULE_ALIAS information. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | | | * | | ASoC: cs42l52: fix the return value of cs42l52_set_fmt()Wei Yongjun2012-11-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the return value of cs42l52_set_fmt() when clock inversion is not allowed and also remove the useless variable ret. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) [We had been assigning to ret but then ignoring the value we assgined -- broonie] Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | | * | | | ASoC: core: Double control update err for snd_soc_put_volsw_sxMukund Navada2012-11-091-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_soc_put_volsw_sx function fails to update second control if first control is updated by snd_soc_update_bits_locked. Signed-off-by: Mukund Navada <navada@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | | * | | | ASoC: dapm: Use card_list during DAPM shutdownMisael Lopez Cruz2012-11-091-1/+1
| | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DAPM shutdown incorrectly uses "list" field of codec struct while iterating over probed components (codec_dev_list). "list" field refers to codecs registered in the system, "card_list" field is used for probed components. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | * | | | ASoC: wm5102: Write register value corrections after SYSCLK is enabledMark Brown2012-10-301-1/+551
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Evalation of the WM5102 has identified a number of register values which should be written after SYSCLK is enabled on revision A in order to improve performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | ALSA: hda - Add a missing quirk entry for iMac 9,1Takashi Iwai2012-11-121-0/+1
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is another variant of iMac 9,1 with a different codec SSID. Reported-and-tested-by: Everaldo Canuto <everaldo.canuto@gmail.com> Cc: <stable@vger.kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: Fix card refcount unbalanceTakashi Iwai2012-11-085-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are uncovered cases whether the card refcount introduced by the commit a0830dbd isn't properly increased or decreased: - OSS PCM and mixer success paths - When lookup function gets NULL This patch fixes these places. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150)Kailang Yang2012-11-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Improve HP depop when system enter to S3Kailang Yang2012-11-081-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alc269_toggle_power_output() was only use in ALC269VB. I rename it to alc269vb_toggle_power_output(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: usb-audio: Fix crash at re-preparing the PCM streamTakashi Iwai2012-11-083-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are bug reports of a crash with USB-audio devices when PCM prepare is performed immediately after the stream is stopped via trigger callback. It turned out that the problem is that we don't wait until all URBs are killed. This patch adds a new function to synchronize the pending stop operation on an endpoint, and calls in the prepare callback for avoiding the crash above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=49181 Reported-and-tested-by: Artem S. Tashkinov <t.artem@lycos.com> Cc: <stable@vger.kernel.org> [v3.6] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hdspm - Fix sync check reporting on RME RayDATAdrian Knoth2012-11-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RayDAT reports the sync status of its inputs in consecutive bit positions, so all we do in hdspm_s1_sync_check is to iterate over idx: status = hdspm_read(hdspm, HDSPM_RD_STATUS_1); lock = (status & (0x1<<idx)) ? 1 : 0; sync = (status & (0x100<<idx)) ? 1 : 0; The index is given in kcontrol->private_value: HDSPM_SYNC_CHECK("WC SyncCheck", 0), HDSPM_SYNC_CHECK("AES SyncCheck", 1), HDSPM_SYNC_CHECK("SPDIF SyncCheck", 2), HDSPM_SYNC_CHECK("ADAT1 SyncCheck", 3), HDSPM_SYNC_CHECK("ADAT2 SyncCheck", 4), HDSPM_SYNC_CHECK("ADAT3 SyncCheck", 5), HDSPM_SYNC_CHECK("ADAT4 SyncCheck", 6), HDSPM_SYNC_CHECK("TCO SyncCheck", 7), HDSPM_SYNC_CHECK("SYNC IN SyncCheck", 8), The patch corrects the indicated sync flags by passing the proper index value to hdspm_s1_sync_check(). Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Add pin fixups for ASUS G75Takashi Iwai2012-11-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To parse properly the subwoofer outputs on ASUS G75 laptop with VT1802 codec, correct the default configurations of speaker pins 0x24 and 0x33. Reported-by: Massimo Del Fedele <max@veneto.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Fix invalid connections in VT1802 codecTakashi Iwai2012-11-071-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VT1802 codec provides the invalid connection lists of NID 0x24 and 0x33 containing the routes to a non-exist widget 0x3e. This confuses the auto-parser. Fix it up in the driver by overriding these connections. Reported-by: Massimo Del Fedele <max@veneto.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Fix empty DAC filling in patch_via.cTakashi Iwai2012-11-071-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In via_auto_fill_adc_nids(), the parser tries to fill dac_nids[] at the point of the current line-out (i). When no valid path is found for this output, this results in dac = 0, thus it creates a hole in dac_nids[]. This confuses is_empty_dac() and trims the detected DAC in later reference. This patch fixes the bug by appending DAC properly to dac_nids[] in via_auto_fill_adc_nids(). Reported-by: Massimo Del Fedele <max@veneto.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Force to reset IEC958 status bits for AD codecsTakashi Iwai2012-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several bug reports suggest that the forcibly resetting IEC958 status bits is required for AD codecs to get the SPDIF output working properly after changing streams. Original fix credit to Javeed Shaikh. BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361 Reported-by: Robin Kreis <r.kreis@uni-bremen.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: es1968: Add ESS vendor ID to pm_whitelistOndrej Zary2012-11-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add generic ESS vendor ID to pm_whitelist. This should fix suspend on all Maestro-2 and Maestro-2E based PCI cards. Tested on Terratec DMX and SF64-PCE2. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: HDA: Mark CS260x immutable structures constDaniel J Blueman2012-11-051-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark structures that won't change const. Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: HDA: Fix digital microphone on CS420xDaniel J Blueman2012-11-051-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly enable the digital microphones with the right bits in the right coeffecient registers on Cirrus CS4206/7 codecs. It also prevents misconfiguring ADC1/2. This fixes the digital mic on the Macbook Pro 10,1/Retina. Based-on-patch-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Daniel J Blueman <daniel@quora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda: Cirrus: Fix coefficient index for beep configurationAlexander Stein2012-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - support Teradici 2200 host card audioLars R. Damerow2012-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The audio chipset used in Teradici's Tera2 host cards is the same as that in the 1200 host cards. This patch allows ALSA to recognize the Tera2 cards. Signed-off-by: Lars R. Damerow <lars@pixar.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: Fix typo in drivers soundMasanari Iida2012-11-046-6/+6
| |/ / |/| | | | | | | | | | | | | | | | | Correct spelling typo in debug messages within drivers/sound Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: ice1724: Fix rate setup after resumeTakashi Iwai2012-10-311-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The rate isn't restored properly after resume since it's only set up in hw_params, and not in prepare callback. For fixing it, put the corresponding call to resume callback as well. Reported-and-tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud