summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Add Conexant CX8200 (14f1:2008) codec entryTakashi Iwai2015-12-011-0/+1
| | | | | | It's supposed to be equivalent with CX20724. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Correct codec names for 14f1:50f1 and 14f1:50f3Takashi Iwai2015-12-011-2/+2
| | | | | | | | The numbers aren't always linear, just like in the real world. Correct to the right numbers stated in the datasheet (although we can't trust the datasheet as well). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Skip ELD notification during system suspendTakashi Iwai2015-11-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent addition of ELD notifier for Intel HDMI/DP codec may lead the bad codec connection found as kernel messages like below: Suspending console(s) (use no_console_suspend to debug) hdmi_present_sense: snd_hda_codec_hdmi hdaudioC0D2: HDMI status: Codec=2 Pin=6 Presence_Detect=1 ELD_Valid=1 snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f2e08 snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f2e08 .... snd_hda_codec_hdmi hdaudioC0D2: HDMI: ELD buf size is 0, force 128 snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x206f2f00 snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x206f2f00 snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x206f2f00 azx_single_wait_for_response: 42 callbacks suppressed This seems appearing when the sound driver went to suspend before i915 driver. Then i915 driver disables HDMI/DP audio bit and calls the registered notifier, and the HDA codec tries to handle it as a hot(un)plug. But since the driver is already in the suspended state, it fails miserably. As this is a sort of spurious wakeup, it can be ignored safely, as long as it's delivered during the system suspend. OTOH, if a notification comes during the runtime suspend, the situation is different: we need to wake up. But during the system suspend, such a notification can't be the reason for a wakeup. This patch addresses it by a simple check of the current sound card status. The skipped notification doesn't matter because the HDA driver will check the plugged status forcibly at the resume in return. Then, why the card status, not a runtime PM status or else? The HDA controller driver is supposed to set the card status to D3 at the system suspend but not at the runtime suspend. So we can see it as a flag that is set only for the system suspend. Admittedly, it's a bit ugly, but it should work well for now. Reported-and-tested-by: "Zhang, Xiong Y" <xiong.y.zhang@intel.com> Fixes: 25adc137c546 ('ALSA: hda - Wake the codec up on pin/ELD notify events') Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-fix-v4.4-rc2' of ↵Takashi Iwai2015-11-2764-151/+250
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.4 Quite a large batch of fixes have come in since the merge window, mainly driver specific ones but there's a couple of core ones: - A fix for DAPM resume on active streams to ensure everything ends up cleanly in the right state. - Reset the DAPM cache when freeing widgets to fix a crash on driver remove and reload. The PM functions for nau8825 are new code which fix crashes on resume.
| *---------. Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/st', ↵Mark Brown2015-11-257-61/+86
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/sun4i-codec', 'asoc/fix/topology', 'asoc/fix/wm8960' and 'asoc/fix/wm8962' into asoc-linus
| | | | | | | * ASoC: wm8962: correct addresses for HPF_C_0/1Sachin Pandhare2015-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From datasheet: R17408 (4400h) HPF_C_1 R17409 (4401h) HPF_C_0 17048 -> 17408 (0x4400) 17049 -> 17409 (0x4401) Signed-off-by: Sachin Pandhare <sachinpandhare@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | | | | * | ASoC: wm8960: Fix the Input PGA Mute switchJongHo Kim2015-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the xinvert value from 0 to 1 on the "Capture Switch" control WM8960 datasheet is shown as follows: Bit 7 at 00h and 01h register address 1 : Enable Mute, 0 : Disable Mute Signed-off-by: JongHo Kim <furmuwon@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | ASoC: topology: fix info callback for TLV byte controlOmair M Abdullah2015-11-181-1/+1
| | | | | | |/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | topology core used wrong callback for TLV bytes control, it should be snd_soc_bytes_info_ext and not snd_soc_bytes_info Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | ASoC: sun4i-codec: use consistent names for PA controlsAdam Sampson2015-11-051-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device. When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous. Change it to use "Power Amplifier" consistently for the power amplifier's controls. Signed-off-by: Adam Sampson <ats@offog.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | ASoC: sti: set player private dataMoise Gergaud2015-11-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set substream player private data. substream player private data is used in uni_player_irq_handler to lock, stop & unlock the stream when interrupt indicates underflow/overflow. If not set, then segmentation fault occurs. Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | ASoC: sti: rename ST proprietary DT propertiesMoise Gergaud2015-11-192-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "st," prefix has been added for ST proprietary DT properties. Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | ASoC: sti: remove wrong error messageMoise Gergaud2015-11-191-1/+0
| | | | |/ / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: rt5677: Avoid the pop sound that comes from the filter powerOder Chiou2015-11-101-39/+61
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch changes the type of DACs mixer to AUTODISABLE and add the delay time after power up to avoid the pop sound that comes from the filter power. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | |
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| *---------. \ \ \ Merge remote-tracking branches 'asoc/fix/nau8825', 'asoc/fix/ops', ↵Mark Brown2015-11-258-14/+54
| |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/rcar', 'asoc/fix/rl6231', 'asoc/fix/rockchip' and 'asoc/fix/rt5670' into asoc-linus
| | | | | | | * | | | ASoC: rt5670: fix wrong bit def for pll srcBard Liao2015-11-171-6/+6
| | | | | | | | |/ / | | | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bit allocation for PLL source is 0x80 [13:11] instead of [12:11] Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | * | | | ASoC: rockchip: Fix incorrect VDW value for 24 bitSjoerd Simons2015-11-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct valid data word register value for 24 bit data width. The bit value should be 10 (aka 0x2), not 0x10. This fixes playback of 24 bit audio. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | * | | | ASoC: fix rockchip 64-bit build warningArnd Bergmann2015-11-161-1/+1
| | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rk_spdif_probe uses the device match data as a token to identify a particular device, but accidentally casts a pointer to 'int', which is not portable, as gcc points out in this warning on arm64: rockchip_spdif.c: In function 'rk_spdif_probe': rockchip_spdif.c:283:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] This changes the logic to compare two pointer values instead, using the same cast that was used for initializing the value in the first place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | ASoC: rl6231: fix range of DMIC clockJohn Lin2015-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The maximum DMIC clock rate is 3.072 MHz for most DMIC. And it will get better performance in higher clock rate. If we set maximum to 3 MHz in driver, we will get a clock rate which is not even close to 3 MHz. For example, if DMIC clock source is 24.576 MHz, the DMIC clock will be about 1.5 MHz in current code. But it will be 3.072 MHz with this patch. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | ASoC: rl6231: avoid using divisible by 3 for DMIC clkBard Liao2015-11-101-0/+2
| | | | | | |/ / | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Few codecs will meet no DMIC clock output issue when select a divided number which is divisible by 3. To prevent this issue, the patch ignore the numbers when calculating the DMIC clock divider. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | ASoC: rsnd: make sure SRC In Rate feature enablementKuninori Morimoto2015-11-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SRC In Rate convert feature cannot be used if data path is using DVC. This patch judges it, and not allowed to use it in such case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | Merge tag 'asoc-v4.3-rc6' into asoc-fix-rcarMark Brown2015-11-10165-1489/+14087
| | | | |\ \ \ \ | | | | | | |_|/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ASoC: Updates for v4.4 Not much core work here, a few small tweaks to interfaces but mainly the changes here are driver ones. Highlights include: - Updates to the topology userspace interface - Big updates to the Renesas support from Morimoto-san - Most of the support for Intel Sky Lake systems. - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10, Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip S/PDIF.
| | | | * | | | ASoC: rsnd: fixup SCU_SYS_INT_EN1 addressKuninori Morimoto2015-11-061-1/+1
| | | | | |/ / | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cfcefe0126 ("ASoC: rsnd: add recovery support for under/over flow error on SRC") added SCU_SYS_INT_EN1 address, but it should be 0x1d4, not 0x1c4. This patch fixup it. Fixes: cfcefe0126 ("ASoC: rsnd: add recovery support for under/over flow error on SRC") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | * | | | ASoC: fix kernel-doc warnings in sound/soc/soc-ops.cRandy Dunlap2015-11-251-1/+1
| | | | |_|/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kernel-doc warnings in soc-ops.c: ..//sound/soc/soc-ops.c:415: warning: No description found for parameter 'ucontrol' ..//sound/soc/soc-ops.c:415: warning: Excess function parameter 'uinfo' description in 'snd_soc_put_volsw_sx' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: nau8825: add pm functionYong Zhi2015-11-161-0/+31
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pm function and fixes following issues 1.i2c timeout after resume, after resume we saw interrupt handler is called prior to i2c controller is resumed.This causes i2c timeout 2.no audio after resume Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | |
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| *-------. \ \ \ Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', ↵Mark Brown2015-11-256-12/+24
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/fsl', 'asoc/fix/fsl-sai' and 'asoc/fix/intel' into asoc-linus
| | | | | | * | | | ASoC: Intel: Skylake: fix memory leakSudip Mukherjee2015-11-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have requested the firmware but missed releasing it. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | * | | | ASoC: Intel: Skylake: Add I2C depends for SKL machineVinod Koul2015-11-181-1/+1
| | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c is dependency for the i2c codec drivers, so machine should depend on i2c. WIthout this we get build failures if I2C is not selected sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_write': >> sound/soc/codecs/rl6347a.c:66:8: error: implicit declaration of function >> 'i2c_master_send' [-Werror=implicit-function-declaration] ret = i2c_master_send(client, data, 4); ^ sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_read': >> sound/soc/codecs/rl6347a.c:114:8: error: implicit declaration of function >> 'i2c_transfer' [-Werror=implicit-function-declaration] ret = i2c_transfer(client->adapter, xfer, 2); Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | ASoC: fsl_sai: fix Rx synchrounous modeStefan Agner2015-10-261-1/+2
| | | | | | |/ / | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using the Rx clock for both, transmitter and receiver, the transmitter needs to be set to synchronous with receiver. This reverts 855675f6e6a6 ("ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode"), which, judiging from the commit log, seems to mixed up between the two synchronous modes: The boolean sai->synchronous[TX] is indicating wheather the SAI should work in Rx synchronous mode (sync Tx with Rx), hence if the value is true, the SYNC field of TCR2 needs to be set to 0x1 ("Synchronous with receiver"). Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | ASoC: fsl: clarify ac97 dependencyArnd Bergmann2015-11-251-0/+2
| | | | | |/ / | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new randconfig build failure shows that the fsl-asoc-card module must not be built-in when the AC97 driver is a loadable module: sound/built-in.o: In function `fsl_asoc_card_late_probe': :(.text+0x571d8): undefined reference to `snd_ac97_update_bits' I couldn't come up with a nice solution, so this adds another dependency on "X || !X", which is the Kconfig way of saying that we have an optional dependency on something that might be a loadable module. Fixes: 50760cad9de9 ("ASoC: fsl-asoc-card: add AC'97 support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | ASoC: es8328: Fix shifts for mixer switchesJohn Keeping2015-11-201-8/+8
| | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are all off by one; the playback and bypass switches are the top two bits of the registers, which are at shifts 7 and 6 not 8 and 7. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: davinci-mcasp: Fix master capture only modePeter Ujfalusi2015-11-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When McASP is used as TX/RX synchronous (TX side generating clocks for RX side also) and only capture is used we need to configure the number of TX slots in order McASP to be able to generate the Frame sync. Fixes: 9273de1940d9e ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: davinci-mcasp: Fix TDM slot rx/tx mask associationsAndreas Dannenberg2015-11-101-2/+2
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the associations between the tx_mask and rx_mask and the associated playback / capture streams during setting of the TDM slot. With this patch in place it is now possible for example to only populate tx_mask (leaving rx_mask as 0) for output-only codecs to control the TDM slot(s) the McASP serial port uses for transmit. Before that, this scenario would incorrectly rely on the rx_mask for this. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown2015-11-251-4/+57
| |\ \ \ \
| | * | | | ASoC: rt5645: Add dmi_system_id "Google Terra"Bard Liao2015-11-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform specific data for Terra project. Signed-off-by: Luke_Yin@asus.com <Luke_Yin@asus.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: rt5645: Add dmi_system_id "Google Wizpig"Bard Liao2015-11-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform specific data for Wizpig project. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: rt5645: Add struct dmi_system_id "Google Edgar" for Chrome OSJohn Lin2015-11-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform specific data for Edgar project. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: rt5645: Increase the delay time to imporve the HP pop noiseJohn Lin2015-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unmuting headphone has pop noise in particular hardware design. So we extend the delay time in headphone unmuting sequence to avoid pop. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust ↵Oder Chiou2015-11-051-3/+35
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown2015-11-253-3/+11
| |\ \ \ \
| | * | | | ASoC: core: Change power state before rechecking endpointJeeja KP2015-11-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For DAPM resume, we should first change the power state of the card and then recheck the endpoints. This ensures the dapm is resumed first and then userspace can resume the streams. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | ASoC: dapm: Reset dapm wcache after freeing damp widgetsJyri Sarha2015-11-102-0/+8
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there is anything in damp->path_source_cache or damp->path_sink_cache, it can not be valid after the widgets have been freed. Without this patch a repeated remove and load of a machine driver may cause NULL pointer reference in dapm_wcache_lookup() when a freed widget, not belonging to any list, is haunting in the wcache. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | Merge remote-tracking branch 'asoc/fix/arizona' into asoc-linusMark Brown2015-11-251-11/+5
| |\ \ \ \ | | |_|/ / | |/| | |
| | * | | ASoC: arizona: fix range of OPCLK_REFRichard Fitzgerald2015-11-031-11/+5
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code was able to generate illegal OPCLK_REF values because the reference frequency tables listed all values of SYSCLK instead of valid values for OPCLK_REF clock. The maximum OPCLK_REF clock is 49.152MHz or 45.1584MHz. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | Merge tag 'sound-fix-4.4-rc1' of ↵Linus Torvalds2015-11-1415-51/+43
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes tha have been gathered for 4.4-rc1. The only significant changes are those in PCI drivers Kconfig, to use "depends on" instead of "select" for CONFIG_ZONE_DMA. A reverse select is often more user-friendly, but in this case, it makes hard to manage with the conflict with ZONE_DEVICE, so changed in such a way for now. Others are all small fixes and quirks: an error check in soundcore reigster_chrdev(), HD-audio HDMI/DP phantom jack fix, Intel Broxton DP quirk, USB-audio DSD device quirk, some constifications, etc" * tag 'sound-fix-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pci: depend on ZONE_DMA ALSA: hda - Simplify phantom jack handling for HDMI/DP ALSA: hda/hdmi - apply Skylake fix-ups to Broxton display codec ALSA: ctxfi: constify rsc ops structures ALSA: usb: Add native DSD support for Aune X1S ALSA: oxfw: add an comment to Kconfig for TASCAM FireOne sound: fix check for error condition of register_chrdev()
| * \ \ \ Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2015-11-103-10/+9
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "I Was Almost Tempted To Capitalise Every Word, but then I decided I couldn't read it myself! I've also got one pull request for the sti driver outstanding. It relied on a commit in Greg's tree and I didn't find out in time, that commit is in your tree now so I might send that along once this is merged. I also had the accidental misfortune to have access to a Skylake on my desk for a few days, and I've had to encourage Intel to try harder, which seems to be happening now. Here is the main drm-next pull request for 4.4. Highlights: New driver: vc4 driver for the Rasberry Pi VPU. (From Eric Anholt at Broadcom.) Core: Atomic fbdev support Atomic helpers for runtime pm dp/aux i2c STATUS_UPDATE handling struct_mutex usage cleanups. Generic of probing support. Documentation: Kerneldoc for VGA switcheroo code. Rename to gpu instead of drm to reflect scope. i915: Skylake GuC firmware fixes HPD A support VBT backlight fallbacks Fastboot by default for some systems FBC work BXT/SKL workarounds Skylake deeper sleep state fixes amdgpu: Enable GPU scheduler by default New atombios opcodes GPUVM debugging options Stoney support. Fencing cleanups. radeon: More efficient CS checking nouveau: gk20a instance memory handling improvements. Improved PGOB detection and GK107 support Kepler GDDR5 PLL statbility improvement G8x/GT2xx reclock improvements new userspace API compatiblity fixes. virtio-gpu: Add 3D support - qemu 2.5 has it merged for it's gtk backend. msm: Initial msm88896 (snapdragon 8200) exynos: HDMI cleanups Enable mixer driver byt default Add DECON-TV support vmwgfx: Move to using memremap + fixes. rcar-du: Add support for R8A7793/4 DU armada: Remove support for non-component mode Improved plane handling Power savings while in DPMS off. tda998x: Remove unused slave encoder support Use more HDMI helpers Fix EDID read handling dwhdmi: Interlace video mode support for ipu-v3/dw_hdmi Hotplug state fixes Audio driver integration imx: More color formats support. tegra: Minor fixes/improvements" [ Merge fixup: remove unused variable 'dev' that had all uses removed in commit 4e270f088011: "drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj" ] * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits) drm/vmwgfx: Relax irq locking somewhat drm/vmwgfx: Properly flush cursor updates and page-flips drm/i915/skl: disable display side power well support for now drm/i915: Extend DSL readout fix to BDW and SKL. drm/i915: Do graphics device reset under forcewake drm/i915: Skip fence installation for objects with rotated views (v4) vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT drm/amdgpu: group together common fence implementation drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE drm/amdgpu: remove now unused fence functions drm/amdgpu: fix fence fallback check drm/amdgpu: fix stoping the scheduler timeout drm/amdgpu: cleanup on error in amdgpu_cs_ioctl() drm/i915: Fix locking around GuC firmware load drm/amdgpu: update Fiji's Golden setting drm/amdgpu: update Fiji's rev id drm/amdgpu: extract common code in vi_common_early_init drm/amd/scheduler: don't oops on failure to load drm/amdgpu: don't oops on failure to load (v2) drm/amdgpu: don't VT switch on suspend ...
| | * \ \ \ Merge tag 'topic/drm-misc-2015-10-19' of ↵Dave Airlie2015-10-203-8/+8
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next More drm-misc for 4.4. - fb refcount fix in atomic fbdev - various locking reworks to reduce drm_global_mutex and dev->struct_mutex - rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more vga_switcheroo (Lukas Wunner) - viewport check fixes for atomic drivers from Ville - DRM_DEBUG_VBL from Ville - non-contentious header fixes from Mikko Rapeli - small things all over * tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits) drm/fb-helper: Fix fb refcounting in pan_display_atomic drm/fb-helper: Set plane rotation directly drm: fix mutex leak in drm_dp_get_mst_branch_device drm: Check plane src coordinates correctly during page flip for atomic drivers drm: Check crtc viewport correctly with rotated primary plane on atomic drivers drm: Refactor plane src coordinate checks drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane drm: Don't leak fb when plane crtc coodinates are bad ALSA: hda - Spell vga_switcheroo consistently drm/gem: Use kref_get_unless_zero for the weak mmap references drm/vgem: Drop vgem_drm_gem_mmap drm: Fix return value of drm_framebuffer_init() drm/gem: Use container_of in drm_gem_object_free drm/gem: Check locking in drm_gem_object_unreference drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj drm/i810_drm.h: include drm/drm.h r128_drm.h: include drm/drm.h savage_drm.h: include <drm/drm.h> gpu/doc: Convert to markdown harder gpu/doc: Add vga_switcheroo documentation ...
| | | * | | | ALSA: hda - Spell vga_switcheroo consistentlyLukas Wunner2015-10-193-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/9b0175319ce78d831acfcf11e4c6c760f826b0e3.1444663039.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | | Merge tag 'drm-intel-next-2015-10-10' of ↵Dave Airlie2015-10-201-0/+19
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next - dmc fixes from Animesh (not yet all) for deeper sleep states - piles of prep patches from Ville to make mmio functions type-safe - more fbc work from Paulo all over - w/a shuffling from Arun Siluvery - first part of atomic watermark updates from Matt and Ville (later parts had to be dropped again unfortunately) - lots of patches to prepare bxt dsi support ( Shashank Sharma) - userptr fixes from Chris - audio rate interface between i915/snd_hda plus kerneldoc (Libin Yang) - shrinker improvements and fixes (Chris Wilson) - lots and lots of small patches all over * tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel: (134 commits) drm/i915: Update DRIVER_DATE to 20151010 drm/i915: Partial revert of atomic watermark series drm/i915: Early exit from semaphore_waits_for for execlist mode. drm/i915: Remove wrong warning from i915_gem_context_clean drm/i915: Determine the stolen memory base address on gen2 drm/i915: fix FBC buffer size checks drm/i915: fix CFB size calculation drm/i915: remove pre-atomic check from SKL update_primary_plane drm/i915: don't allocate fbcon from stolen memory if it's too big Revert "drm/i915: Call encoder hotplug for init and resume cases" Revert "drm/i915: Add hot_plug hook for hdmi encoder" drm/i915: use error path drm/i915/irq: Fix misspelled word register in kernel-doc drm/i915/irq: Fix kernel-doc warnings drm/i915: Hook up ring workaround writes at context creation time on Gen6-7. drm/i915: Don't warn if the workaround list is empty. drm/i915: Resurrect golden context on gen6/7 drm/i915/chv: remove pre-production hardware workarounds drm/i915/snb: remove pre-production hardware workaround drm/i915/bxt: Set time interval unit to 0.833us ...
| | | * \ \ \ \ Merge remote-tracking branch 'takashi/topic/drm-sync-audio-rate' into ↵Daniel Vetter2015-10-071-0/+19
| | | |\ \ \ \ \ | | | | |/ / / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm-intel-next-queued Pull in the i915/hda changes for N/CTS setting so I can apply the follow-up documentation work for drm/i915. Some conflicts because ofc we had to rework i915 while that N/CTS work was going on. But not more than adjacent changes really. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| | * | | | | | Merge commit '06d1ee32a4d25356a710b49d5e95dbdd68bdf505' of ↵Dave Airlie2015-10-1613-40/+67
| | |\ \ \ \ \ \ | | | |/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge the drm-fixes pull from Linus's tree into drm-next. This is to fix some conflicts and make future pulls cleaner
OpenPOWER on IntegriCloud