summaryrefslogtreecommitdiffstats
path: root/sound/usb
Commit message (Collapse)AuthorAgeFilesLines
* [ALSA] usbaudio - Add support for Edirol UA-101Bjoern Fay2007-02-093-1/+85
| | | | | | | | | | | | | | | | Added support for the Edirol UA-101 (only in high-speed mode) by taking the quirks for the UA-1000 and change them accordingly. Changes were made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h' MIDI and recording seem to work perfectly (with JACK), but playback gives some few glitches. I think that's the mentioned synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be synchronized to capture'), so I didn't change that. ToDo: Adding Mixer-Support for the built-in control-panel/patch-bay/router. Signed-off-by: Bjoern Fay <mail@bfay.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usbaudio - Fix Oops with unconventional sample ratesTakashi Iwai2007-02-091-19/+26
| | | | | | | | | The patch fixes the memory corruption by the support of unconventional sample rates. Also, it avoids the too restrictive constraints if any of usb descriptions contain continuous rates. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usbaudio - Fix Oops with broken usb descriptorsGregor Jasny2007-02-091-0/+6
| | | | | | | | | This is a patch for ALSA Bug #2724. Some webcams provide bogus settings with no valid rates. With this patch those are skipped. Signed-off-by: Gregor Jasny <gjasny@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usbaudio.c: remove unneeded castsJohn Daiker2007-02-091-10/+10
| | | | | | | | | | Went rummaging through usbaudio.c and found some castings that aren't needed as far as I can see. Part of the KernelJanitors TODO list. Signed-off-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio: allow pausingClemens Ladisch2007-02-091-9/+31
| | | | | | | Add pause capabilities for both USB playback and capture streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio: merge playback/capture hardware information structsClemens Ladisch2007-02-091-20/+5
| | | | | | | | | The hardware information structures for playback and capture streams, respectively, are the same, so we can use just one structure for both streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Repair snd-usb-usx2y over OHCIKarsten Wiese2007-01-232-2/+2
| | | | | | | | | | | | | The previous patch 'Repair snd-usb-usx2y for usb 2.6.18' assumed urb->start_frame roll over beyond MAX_INT for both UHCI & OHCI. This isn't true until now (kernel 2.6.20). Fix this by only looking at the common between OHCI & UHCI Frame number range. This is for mainline and stable kernels >= 2.6.18. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usbaudio - Fix kobject_add() error at reconnectionTakashi Iwai2007-01-091-1/+1
| | | | | | | | | | Fixed the error from kobject_add() at reconnection the usb audio device. This happens when an app keeps opening a device while the device is replugged, due to the confliction of the internal bookkept index and the really empty slot. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb: usbmixer error path fixMariusz Kozlowski2007-01-091-1/+1
| | | | | | | | | Without the patch below namelist[0] will not be freed in case of kmalloc error. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio: work around wrong frequency in CM6501 descriptorsClemens Ladisch2007-01-091-1/+7
| | | | | | | | The C-Media CM6501 chip's descriptors say that altsetting 5 supports 48 kHz, but it actually plays at 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sound/usb/usbaudio: Handle return value of usb_register()Tobias Klauser2006-12-201-2/+1
| | | | | | | | Handle the return value of usb_register() in the module_init function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] mm: incorrect VM_FAULT_OOM returns from driversNick Piggin2006-12-071-1/+1
| | | | | | | | | | | | | Some drivers are returning OOM when it is not in response to a memory shortage. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* usb: usbmixer free kill urb cleanupMariusz Kozlowski2006-12-011-6/+3
| | | | | | | | | - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: usbmidi kill urb cleanupMariusz Kozlowski2006-12-011-1/+1
| | | | | | | | - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] Fix hang-up at disconnection of usb-audioTakashi Iwai2006-11-281-1/+2
| | | | | | | | Fix hang-up at disconnection of usb-audio devices while accessing PCM. Don't handle PCM operations any more after shutdown flag is set. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Repair snd-usb-usx2y for usb 2.6.18Karsten Wiese2006-10-062-22/+11
| | | | | | | | | urb->start_frame rolls over beyond MAX_INT now. This is for stable kernel and stable alsa. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()Karsten Wiese2006-10-061-1/+1
| | | | | | | | | | | Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check() substream can be NULL...... in mainline, bug was introduced by: 2006-06-22 [ALSA] Add O_APPEND flag support to PCM Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-056-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] kmemdup: some usersAlexey Dobriyan2006-10-012-9/+5
| | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* USB: Dealias -110 code (more complete)Pete Zaitcev2006-09-271-3/+3
| | | | | | | | | | | | | | | | | | | The purpose of this patch is to split off the case when a device does not reply on the lower level (which is reported by HC hardware), and a case when the device accepted the request, but does not reply at upper level. This redefinition allows to diagnose issues easier, without asking the user if the -110 happened "immediately". The usbmon splits such cases already thanks to its timestamp, but it's not always available. I adjusted all drivers which I found affected (by searching for "urb"). Out of tree drivers may suffer a little bit, but I do not expect much breakage. At worst they may print a few messages. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] usb-audio: add mixer control names for the Aureon 5.1 MkIIClemens Ladisch2006-09-231-0/+24
| | | | | | | Add a mixer name map for the TerraTec Aureon 5.1 MkII USB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio: increase number of packets per URBClemens Ladisch2006-09-231-2/+2
| | | | | | | | To decrease the USB interrupts rate, increase both the default and the maximum number of packets per URB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Support for non-standard rates in USB audio driverLuke Ross2006-09-231-0/+46
| | | | | | | | | | | | | There's at least one USB audio chipset out there which supports only one non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other patches for this card which are unsatisfactory because they attempt to map this rate to 44.1k leading to sound distortion. The patch below uses SNDRV_PCM_RATE_KNOT to properly support the non-standard rates where they are available. Signed-off-by: Luke Ross <luke@lukeross.name> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio - Fix a typo of CONFIG_PROC_FSTakashi Iwai2006-09-231-1/+1
| | | | | | | | Fixed a typo of CONFIG_PROC_FS in usbaudio.c. The stream proc file appears again. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio: add more Yamaha devicesClemens Ladisch2006-09-231-0/+5
| | | | | | | Add some quirks for some unknown Yamaha USB MIDI devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add TLV support to snd-usb-audio driverTakashi Iwai2006-09-231-0/+27
| | | | | | | | Added TLV-read support to snd-usb-audio driver for passing the volume dB scale information to user-space. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Unregister device files at disconnectionTakashi Iwai2006-09-231-1/+1
| | | | | | | | | | | | Orignally proposed by Sam Revitch <sam.revitch@gmail.com>. Unregister device files at disconnection to avoid the futher accesses. Also, the dev_unregister callback is removed and replaced with the combination of disconnect + free. A new function snd_card_free_when_closed() is introduced, which is used in USB disconnect callback. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris2006-08-031-4/+2
| | | | | | | | sound: Conversions from kmalloc+memset to k(c|z)alloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] usb-audio support for Turtle Beach RoadieSam Revitch2006-06-281-0/+32
| | | | | | | | | | | | | | | | | From: Sam Revitch <sam.revitch@gmail.com>Recently a Turtle Beach Audio Advantage Roadie device ended up in my possession. It seems to work with the snd-usb-audio driver, but only using the headphone jack in 2-channel mode. The device has a DIN connector carrying six more channels that are otherwise silent. C-Media has freely available documentation for the CM106 chip around which this device is based, and enabling 8-channel output, or 6-channel output with the headphone jack following the front pair is a matter of setting one of its registers. Attached is a patch to try to enable 5.1 output mode at probe time. It seems to work correctly with my device. There is quite list of other configurables for this device that might deserve controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] USB midi: Remove duplicate CS_AUDIO_* #definesBen Williamson2006-06-223-9/+2
| | | | | | | | Removed the CS_AUDIO_* #defines, which were duplicates of the class-specific USB_DT_CS_* #defines in <linux/usb_ch9.h>. Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] usbaudio - Fix a typoTakashi Iwai2006-06-221-1/+1
| | | | | | Fix a typo introduced by the last fix. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] usb-audio: add workaround for CSR Bluetooth Headphones (Saitek A-250)Clemens Ladisch2006-06-221-3/+4
| | | | | | | | Some devices don't have the required class-specific endpoint descriptors. Instead of making this case an error, this patch makes the driver guess the endpoint attributes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] add support for SB Live! 24-Bit External remote controlRaimonds Cicans2006-06-221-28/+40
| | | | | | | | | This patch rewrites the remote control code to use a table for the peculiarities of the various SB models, and adds support for a third model. Signed-off-by: Raimonds Cicans <ray@vardes.lv> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] rawmidi: add get_port_info callback for sequencer information flagsClemens Ladisch2006-06-221-70/+130
| | | | | | | | Add a get_port_info callback to the snd_rawmidi_global_ops structure to allow the USB MIDI driver to supply information flags for the sequencer ports created by seq_midi. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Add O_APPEND flag support to PCMTakashi Iwai2006-06-221-1/+1
| | | | | | | | Added O_APPEND flag support to PCM to enable shared substreams among multiple processes. This mechanism is used by dmix and dsnoop plugins. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai2006-06-222-4/+4
| | | | | | | Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] add another Phase 26 quirkClemens Ladisch2006-04-271-0/+9
| | | | | | Add a quirk entry for the TerraTec Phase 26 with yet another product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Test volume resolution of usb audio at initializationTakashi Iwai2006-03-311-3/+34
| | | | | | | | | | Test the volume of usb audio whether actually it works and adjusts the resolution value according to it. Some USB audio devices report a lower resolution than it reacts. The only possible check is to write and read a volume value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] Typo fixesAlexey Dobriyan2006-03-281-1/+1
| | | | | | | | Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] fix resource leak in usbmixerJesper Juhl2006-03-221-0/+1
| | | | | | | | | Modules: USB generic driver We may leak 'namelist' in sound/usb/usbmixer.c::parse_audio_selector_unit() Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] usb-audio: add Maya44 mixer control namesClemens Ladisch2006-03-221-0/+20
| | | | | | | | Modules: USB generic driver Add mixer control names for the AudioTrak Maya44 USB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] usb-audio: add Casio PL-40R supportClemens Ladisch2006-03-221-0/+9
| | | | | | | | Modules: USB generic driver Add a quirk entry for the Casio PL-40R. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] usb-audio: add MDP-5/EZ-J24 supportClemens Ladisch2006-03-221-0/+2
| | | | | | | | Modules: USB generic driver Add support for the Yamaha MDP-5 and EZ-J24. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Fixes audiophile usb analog capture with the new device_setup parameterThibault LE MEUR2006-03-221-1/+51
| | | | | | | | | | | | Modules: Documentation,USB generic driver The patch adds the 'device_setup' module parameter and a specific quirk to correctly initialize the audiophile usb device: this fixes the distorted sound bug on the Analog capture port. Backward compatibility is achieved by simply omitting the new parameter. Signed-off-by: Thibault LE MEUR <Thibault.LeMeur@supelec.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] usb-audio: add error message about missing split iso supportClemens Ladisch2006-03-221-0/+4
| | | | | | | | | Modules: USB generic driver Add an error message for -ENOSYS for situations when split iso support is needed but not enabled. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] usb-audio: change Casio quirk product nameClemens Ladisch2006-03-221-1/+2
| | | | | | | | | Modules: USB generic driver Use a generic name for USB device 0x07cf:0x6802 because this ID is used by several devices without a product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] usb-audio: show USB error descriptionsClemens Ladisch2006-03-221-4/+35
| | | | | | | | | Modules: USB generic driver When usb_submit_urb() fails, show an error description instead of just the error code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] usb-audio: add Casio AP-80R supportClemens Ladisch2006-03-221-0/+11
| | | | | | | | Modules: USB generic driver Add a quirk for the Casio AP-80R. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] fix usbmixer double kfreeDave Jones2006-03-221-1/+0
| | | | | | | | | | | | Modules: USB generic driver snd_ctl_add() kfree's the kcontrol already if we fail there, so this driver is currently doing a double kfree. Coverity bug #959 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] usb-audio: optimize snd_usbmidi_count_bits()Clemens Ladisch2006-03-221-3/+3
| | | | | | | | | Modules: USB generic driver Reduce the code size of the snd_usbmidi_count_bits() function by using simpler operations. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
OpenPOWER on IntegriCloud