summaryrefslogtreecommitdiffstats
path: root/sound/usb/usbaudio.h
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffersTakashi Iwai2018-05-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, USB-audio driver allocates the PCM buffer via vmalloc(), as this serves merely as an intermediate buffer that is copied to each URB transfer buffer. This works well in general on x86, but on some archs this may result in cache coherency issues when mmap is used. OTOH, it works also on such arch unless mmap is used. This patch is a step for mitigating the inconvenience; a new module option "use_vmalloc" is provided so that user can choose to allocate the DMA coherent buffer instead of the existing vmalloc buffer. The drawback is that it'd be the standard dma_alloc_coherent() calls and the system would require contiguous pages on non-x86 archs. Note that it's a global option and not dynamically switchable since the buffer is pre-allocated at the probe time. In theory, it's possible to be switchable, but it'd be trickier and racier. As default use_vmalloc option is set to true, so that the old behavior is kept. For allowing the coherent mmap on ARM or MIPS, pass use_vmalloc=0 option explicitly. Reported-and-tested-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: add UAC3 BADD profiles supportRuslan Bilovol2018-05-131-0/+2
| | | | | | | | | | | | | | | | | | | | Recently released USB Audio Class 3.0 specification contains BADD (Basic Audio Device Definition) document which describes pre-defined UAC3 configurations. BADD support is mandatory for UAC3 devices, it should be implemented as a separate USB device configuration. As per BADD document, class-specific descriptors shall not be included in the Device’s Configuration descriptor ("inferred"), but host can guess them from BADD profile number, number of endpoints and their max packed sizes. This patch adds support of all BADD profiles from the spec Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Allow to override the longname stringTakashi Iwai2018-05-021-0/+1
| | | | | | | | | | | | | | | | Historically USB-audio driver sets the card's longname field with the details of the device and the bus information. It's good per se, but not preferable when it's referred as the identifier for UCM profile. This patch adds a quirk profile_name field to override the card's longname string to a pre-defined one, so that one can create a unique and consistent ID string for the specific USB device via a quirk table to be used as a UCM profile name. The patch does a slight code refactoring to split out the functions to set shortname and longname fields as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Add keep_iface flagTakashi Iwai2018-05-021-0/+3
| | | | | | | | | | | | | | | | | | Introduce a new flag to struct snd_usb_audio for allowing the device to skip usb_set_interface() calls at changing or closing the stream. As of this patch, the flag is nowhere set, so it's just a place holder. The dynamic switching will be added in the following patch. A background information for this change: Dell WD15 dock with Realtek chip gives a very long pause at each time the driver changes the altset, which eventually happens at every PCM stream open/close and parameter change. As the long pause happens in each usb_set_interface() call, there is nothing we can do as long as it's called. The workaround is to reduce calling it as much as possible, and this flag indicates that behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' into for-nextTakashi Iwai2016-05-101-6/+0
|\
| * [media] Revert "[media] sound/usb: Use Media Controller API to share media ↵Mauro Carvalho Chehab2016-03-311-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resources" Unfortunately, this patch caused several regressions at au0828 and snd-usb-audio, like this one: https://bugzilla.kernel.org/show_bug.cgi?id=115561 It also showed several troubles at the MC core that handles pretty poorly the memory protections and data lifetime management. So, better to revert it and fix the core before reapplying this change. This reverts commit aebb2b89bff0 ("[media] sound/usb: Use Media Controller API to share media resources")' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | ALSA: usb-audio: Limit retrying sample rate readsTakashi Iwai2016-04-291-0/+1
|/ | | | | | | | | | | | | | | There are many USB audio devices with buggy firmware that don't react with the sample rate reading properly. This often results in the flood of error messages and slowing down the operation. The sample rate read back is basically only for confirming the sample rate setup, and it's not critically important. As a compromise, in this patch, we stop the sample rate read back once when the device gives errors more than tolerance (twice, as of now). This should improve most of error cases while we still can catch the firmware bugginess. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [media] sound/usb: Use Media Controller API to share media resourcesShuah Khan2016-03-031-0/+6
| | | | | | | | | | | | | | | | | | | Change ALSA driver to use Media Controller API to share media resources with DVB and V4L2 drivers on a AU0828 media device. Media Controller specific initialization is done after sound card is registered. ALSA creates Media interface and entity function graph nodes for Control, Mixer, PCM Playback, and PCM Capture devices. snd_usb_hw_params() will call Media Controller enable source handler interface to request the media resource. If resource request is granted, it will release it from snd_usb_hw_free(). If resource is busy, -EBUSY is returned. Media specific cleanup is done in usb_audio_disconnect(). Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* ALSA: usb-audio: prevent CH345 multiport output SysEx corruptionClemens Ladisch2015-11-161-0/+1
| | | | | | | | | | | | | | | | | | | The CH345 USB MIDI chip has two output ports. However, they are multiplexed through one pin, and the number of ports cannot be reduced even for hardware that implements only one connector, so for those devices, data sent to either port ends up on the same hardware output. This becomes a problem when both ports are used at the same time, as longer MIDI commands (such as SysEx messages) are likely to be interrupted by messages from the other port, and thus to get lost. It would not be possible for the driver to detect how many ports the device actually has, except that in practice, _all_ devices built with the CH345 have only one port. So we can just ignore the device's descriptors, and hardcode one output port. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: USB-audio: Add quirk for Zoom R16/24 playbackRicard Wanderlof2015-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Zoom R16/24 have a nonstandard playback format where each isochronous packet contains a length descriptor in the first four bytes. (Curiously, capture data does not contain this and requires no quirk.) The quirk involves adding the extra length descriptor whenever outgoing isochronous packets are generated, both in pcm.c (outgoing audio) and endpoint.c (silent data). In order to make the quirk as unintrusive as possible, for pcm.c:prepare_playback_urb(), the isochronous packet descriptors are initially set up in the same way no matter if the quirk is enabled or not. Once it is time to actually copy the data into the outgoing packet buffer (together with the added length descriptors) the isochronous descriptors are adjusted in order take the increased payload length into account. For endpoint.c:prepare_silent_urb() it makes more sense to modify the actual function, partly because the function is less complex to start with and partly because it is not as time-critical as prepare_playback_urb() (whose bulk is run with interrupts disabled), so the (minute) additional time spent in the non-quirk case is motivated by the simplicity of having a single function for all cases. The quirk is controlled by the new tx_length_quirk member in struct snd_usb_substream and struct snd_usb_audio, which is conveyed to pcm.c and endpoint.c from quirks.c in a similar manner to the txfr_quirk member in the same structs. In contrast to txfr_quirk however, the quirk is enabled directly in quirks.c:create_standard_audio_quirk() by checking the USB ID in that function. Another option would be to introduce a new QUIRK_AUDIO_ZOOM_INTERFACE or somesuch, which would have made the quirk very plain to see in the quirk table, but it was felt that the additional code needed to implement it this way would just make the implementation more complex with no real gain. Tested with a Zoom R16, both by doing capture and playback separately using arecord and aplay (8 channel capture and 2 channel playback, respectively), as well as capture and playback together using Ardour, as well as Audacity and Qtractor together with jackd. The R24 is reportedly compatible with the R16 when used as an audio interface. Both devices share the same USB ID and have the same number of inputs (8) and outputs (2). Therefore "R16/24" is mentioned throughout the patch. Regression tested using an Edirol UA-5 in both class compliant (16-bit) and "advanced" (24 bit, forces the use of quirks) modes. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Tested-by: Panu Matilainen <pmatilai@laiskiainen.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Replace probing flag with active refcountTakashi Iwai2015-08-261-1/+0
| | | | | | We can use active refcount for preventing autopm during probe. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Avoid nested autoresume callsTakashi Iwai2015-08-261-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix deadlocks at resumingTakashi Iwai2014-05-021-0/+1
| | | | | | | | | | | | The recent addition of the USB audio mixer suspend/resume may lead to deadlocks when the driver tries to call usb_autopm_get_interface() recursively, since the function tries to sync with the finish of the other calls. For avoiding it, introduce a flag indicating the resume operation and avoids the recursive usb_autopm_get_interface() calls during the resume. Reported-and-tested-by: Bryan Quigley <gquigs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Use standard printk helpersTakashi Iwai2014-02-261-0/+9
| | | | | | | | | | | Convert with dev_err() and co from snd_printk(), etc. As there are too deep indirections (e.g. ep->chip->dev->dev), a few new local macros, usb_audio_err() & co, are introduced. Also, the device numbers in some messages are dropped, as they are shown in the prefix automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: improve buffer size computations for USB PCM audioAlan Stern2013-09-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the way URBs are allocated and their sizes are determined for PCM playback in the snd-usb-audio driver. Currently the driver allocates too few URBs for endpoints that don't use implicit sync, making underruns more likely to occur. This may be a holdover from before I/O delays could be measured accurately; in any case, it is no longer necessary. The patch allocates as many URBs as possible, subject to four limitations: The total number of URBs for the endpoint is not allowed to exceed MAX_URBS (which the patch increases from 8 to 12). The total number of packets per URB is not allowed to exceed MAX_PACKS (or MAX_PACKS_HS for high-speed devices), which is decreased from 20 to 6. The total duration of queued data is not allowed to exceed MAX_QUEUE, which is decreased from 24 ms to 18 ms. The total number of ALSA frames in the output queue is not allowed to exceed the ALSA buffer size. The last requirement is the hardest to implement. Currently the number of URBs needed to fill a buffer cannot be determined in advance, because a buffer contains a fixed number of frames whereas the number of frames in an URB varies to match shifts in the device's clock rate. To solve this problem, the patch changes the logic for deciding how many packets an URB should contain. Rather than using as many as possible without exceeding an ALSA period boundary, now the driver uses only as many packets as needed to transfer a predetermined number of frames. As a result, unless the device's clock has an exceedingly variable rate, the number of URBs making up each period (and hence each buffer) will remain constant. The overall effect of the patch is that playback works better in low-latency settings. The user can still specify values for frames/period and periods/buffer that exceed the capabilities of the hardware, of course. But for values that are within those capabilities, the performance will be improved. For example, testing shows that a high-speed device can handle 32 frames/period and 3 periods/buffer at 48 KHz, whereas the current driver starts to get glitchy at 64 frames/period and 2 periods/buffer. A side effect of these changes is that the "nrpacks" module parameter is no longer used. The patch removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Clemens Ladisch <clemens@ladisch.de> Tested-by: Daniel Mack <zonque@gmail.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add support for many Roland/Yamaha devicesClemens Ladisch2013-06-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add quirks to detect the various vendor-specific descriptors used by Roland and Yamaha in most of their recent USB audio and MIDI devices. Together with the previous patch, this should add audio/MIDI support for the following USB devices: - Edirol motion dive .tokyo performance package - Roland MC-808 Synthesizer - Roland BK-7m Synthesizer - Roland VIMA JM-5/8 Synthesizer - Roland SP-555 Sequencer - Roland V-Synth GT Synthesizer - Roland Music Atelier AT-75/100/300/350C/500/800/900/900C Organ - Edirol V-Mixer M-200i/300/380/400/480/R-1000 - BOSS GT-10B Effects Processor - Roland Fantom G6/G7/G8 Keyboard - Cakewalk Sonar V-Studio 20/100/700 Audio Interface - Roland GW-8 Keyboard - Roland AX-Synth Keyboard - Roland JUNO-Di/STAGE/Gi Keyboard - Roland VB-99 Effects Processor - Cakewalk UM-2G MIDI Interface - Roland A-500S Keyboard - Roland SD-50 Synthesizer - Roland OCTAPAD SPD-30 Controller - Roland Lucina AX-09 Synthesizer - BOSS BR-800 Digital Recorder - Roland DUO/TRI-CAPTURE (EX) Audio Interface - BOSS RC-300 Loop Station - Roland JUPITER-50/80 Keyboard - Roland R-26 Recorder - Roland SPD-SX Controller - BOSS JS-10 Audio Player - Roland TD-11/15/30 Drum Module - Roland A-49/88 Keyboard - Roland INTEGRA-7 Synthesizer - Roland R-88 Recorder Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: usb-audio: UAC2: auto clock selection module paramEldad Zack2013-04-041-0/+1
| | | | | | | | | | Add a module param to disable auto clock selection. This is provided for users that expect the audio stream to fail when the clock source is invalid (e.g., the word clock was unintentionally disconnected). Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirkDamien Zammit2013-01-041-1/+0
| | | | | | | | | | | | | | | This patch is based on 3.8-rc1. It fixes two things: 1) A kernel panic caused by incorrect allocation of a u8 variable "bootresponse". 2) A noisy dmesg (urb status -32) caused by broken pipe to an invalid midi endpoint. It is also a little cleaner because there is no need for a new QUIRK_MIDI type as suggested by kernel developers, since the device follows exactly the MIDIMAN protocol. Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:Damien Zammit2012-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch is the result of a lot of trial and error, since there are no specs available for the device. Full duplex support is provided, i.e. playback and recording in stereo. The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the device supports. Also, MIDI in and MIDI out both work. Users will notice that the S/PDIF light also flashes when playback or recording is active. I believe this means that S/PDIF input/output is simultaneously activated with the analogue i/o during use. But this particular functionality remains untested. Note that this particular version of the patch is so far untested on the physical hardware because I have not compiled a full kernel with the changes. However, extensive testing has been done by many users of the hardware who believe other versions of my patch have worked since circa 2009. [Modified to make a function static by tiwai] Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Deprecate async_unlink optionTakashi Iwai2012-11-211-1/+0
| | | | | | | The async unlink behavior has been working over years. The option was provided only as a workaround for 2.4.x kernel. Let's get rid of it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Use rwsem for disconnect protectionTakashi Iwai2012-10-301-1/+1
| | | | | | | | | | | | Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: implement new endpoint streaming modelDaniel Mack2012-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic streaming logic for audio over USB. It defines a model (snd_usb_endpoint) that handles everything that is related to an USB endpoint and its streaming. There are functions to activate and deactivate an endpoint (which call usb_set_interface()), and to start and stop its URBs. It also has function pointers to be called when data was received or is about to be sent, and pointer to a sync slave (another snd_usb_endpoint) that is informed when data has been received. A snd_usb_endpoint knows about its state and implements a refcounting, so only the first user will actually start the URBs and only the last one to stop it will tear them down again. With this sort of abstraction, the actual streaming is decoupled from the pcm handling, which makes the "implicit feedback" mechanisms easy to implement. In order to split changes properly, this patch only adds the new implementation but leaves the old one around, so the the driver doesn't change its behaviour. The switch to actually use the new code is submitted separately. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: add snd_usb_audio-wide mutexDaniel Mack2012-04-131-0/+1
| | | | | | | This is needed for new card-wide list operations. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add Starr Labs USB MIDI supportKristian Amlie2011-08-261-0/+1
| | | | | | | | | | | | Add support for Starr Labs USB MIDI devices such as the Z7S, which are based on an FTDI serial UART chip. Based on a patch by Daniel Mack. Signed-off-by: Kristian Amlie <kristian@amlie.name> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add new quirk type QUIRK_AUDIO_STANDARD_MIXERDaniel Mack2011-05-251-0/+1
| | | | | | | | | This quirk type will let the driver assume that there is a standard mixer on a given interface, or that a specific mixer quirks will handle the device. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usbaudio: implement USB autosuspendOliver Neukum2011-03-111-1/+5
| | | | | | | | | | | | Devices are autosuspended if no pcm nor midi channel is open Mixer devices may be opened. This way they are active when in use to play or record sound, but can be suspended while users have a mixer application running. [Small clean-ups using static inline by tiwai] Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: fix oops due to cleanup race when disconnectingTakashi Iwai2011-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | When a USB audio device is disconnected, snd_usb_audio_disconnect() kills all audio URBs. At the same time, the application, after being notified of the disconnection, might close the device, in which case ALSA calls the .hw_free callback, which should free the URBs too. Commit de1b8b93a0ba "[ALSA] Fix hang-up at disconnection of usb-audio" prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that resulted from this race, but this introduced another race because the URB callbacks could now be executed after snd_usb_hw_free() has returned, and try to access already freed data. Fix the first race by introducing a mutex to serialize the disconnect callback and all PCM callbacks that manage URBs (hw_free and hw_params). Reported-and-tested-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Cc: <stable@kernel.org> [CL: also serialize hw_params callback] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add Novation Launchpad supportClemens Ladisch2010-10-221-1/+1
| | | | | | | | | | | Add a quirk entry for the Novation Launchpad USB MIDI controller. QUIRK_MIDI_FASTLANE gets renamed to *_RAW_BYTES because this quirk type is now shared by different devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Jakob Flierl <jakob.flierl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: parse clock topology of UAC2 devicesDaniel Mack2010-05-311-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Audio devices which comply to the UAC2 standard can export complex clock topologies in its descriptors and set up links between them. The entities that are defined are - clock sources, which define the end-leafs. - clock selectors, which act as switch to select one out of many possible clocks sources. - clock multipliers, which have an input clock source, and act as clock source again. They can be used to derive one clock from another. All sample rate changes, clock validity queries and the like must go to clock source elements, while clock selectors and multipliers can be used as terminal clock source. The following patch adds a parser for these elements and functions to iterate over the tree and find the leaf nodes (clock sources). The samplerate set functions were moved to the new clock.c file. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add support for Akai MPD16Krzysztof Foltman2010-05-211-0/+1
| | | | | | | | | The decoding/encoding is based on own reverse-engineering. Both control and data ports are handled. Writing to control port supports SysEx events only, as this is the only type of messages that MPD16 recognizes. Signed-off-by: Krzysztof Foltman <wdev@foltman.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: refactor codeDaniel Mack2010-03-051-37/+5
| | | | | | | | | | | | | | | | | | | | Clean up the usb audio driver by factoring out a lot of functions to separate files. Code for procfs, quirks, urbs, format parsers etc all got a new home now. Moved almost all special quirk handling to quirks.c and introduced new generic functions to handle them, so the exceptions do not pollute the whole driver. Renamed usbaudio.c to card.c because this is what it actually does now. Renamed usbmidi.c to midi.c for namespace clarity. Removed more things from usbaudio.h. The non-standard drivers were adopted accordingly. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: header file cleanupsDaniel Mack2010-03-051-51/+0
| | | | | | | | | | | | Rename snd-usb-lib to snd-usbmidi-lib as MIDI functions are the only thing it actually contains. Introduce a new header file to only declare these functions. Introduced usbmixer.h for all functions exported by usbmixer.c. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai2010-03-021-2/+1
|\ | | | | | | | | Conflicts: sound/usb/usbaudio.c
| * ALSA: ua101: add Edirol UA-1000 supportClemens Ladisch2010-03-011-2/+1
| | | | | | | | | | | | | | | | | | | | Add support for the Edirol UA-1000 to the UA-101 driver. Both devices behave the same, so we just have to shuffle around some interface numbers and name strings. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* | ALSA: usbaudio: consolidate header filesDaniel Mack2010-02-231-100/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the definitions from linux/usb/audio.h all over the ALSA USB audio driver and add some missing definitions there as well. Use the endpoint attribute macros from linux/usb/ch9 and remove the own things from sound/usb/usbaudio.h. Now things are also nicely prefixed which makes understanding the code easier. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usbaudio: implement basic set of class v2.0 parserDaniel Mack2010-02-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a number of parsers for audio class v2.0. In particular, the following internals are different and now handled by the code: * the number of streaming interfaces is now reported by an interface association descriptor. The old approach using a proprietary descriptor is deprecated. * The number of channels per interface is now stored in the AS_GENERAL descriptor (used to be part of the FORMAT_TYPE descriptor). * The list of supported sample rates is no longer stored in a variable length appendix of the format_type descriptor but is retrieved from the device using a class specific GET_RANGE command. * Supported sample formats are now reported as 32bit bitmap rather than a fixed value. For now, this is worked around by choosing just one of them. * A devices needs to have at least one CLOCK_SOURCE descriptor which denotes a clockID that is needed im the class request command. * Many descriptors (format_type, ...) have changed their layout. Handle this by casting the descriptors to the appropriate structs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usbaudio: introduce new types for audio class v2Daniel Mack2010-02-231-3/+16
|/ | | | | | | | | | | This patch adds some definitions for audio class v2. Unfortunately, the UNIT types PROCESSING_UNIT and EXTENSION_UNIT have different numerical representations in both standards, so there is need for a _V1 add-on now. usbmixer.c is changed accordingly. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: use usbquirk.h for detection of HVR-950Q/850John S. Gruber2009-12-281-0/+1
| | | | | | | | Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h rather than using a case statement in snd_usb_audio_probe. Signed-off-by: John S. Gruber <JohnSGruber@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: relax urb data align. restriction HVR-950Q and HVR-850 onlyJohn S. Gruber2009-12-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Addressing audio quality problem. In sound/usb/usbaudio.c, for the Hauppage HVR-950Q and HVR-850 only, change retire_capture_urb to allow transfers on audio sub-slot boundaries rather than audio slots boundaries. With these devices the left and right channel samples can be split between two different urbs. Throwing away extra channel samples causes a sound quality problem for stereo streams as the left and right channels are swapped repeatedly, perhaps many times per second. Urbs unaligned on sub-slot boundaries are still truncated to the next lowest stride (audio slot) to retain synchronization on samples even though left/right channel synchronization may be lost in this case. Detect the quirk using a case statement in snd_usb_audio_probe. BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745 Signed-off-by: John S. Gruber <JohnSGruber@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio - Added functionality for E-mu 0404USB/0202USB/TrackerPreSergiy Kovalchuk2009-12-281-0/+13
| | | | | | | | | | | | | | | | | | | | Added functionality: 1) Extension Units support (all XU settings now available at alsamixer, kmix, etc): - "AnalogueIn soft limiter" switch; - "Sample rate" selector (values 0,1,2,3,4,5 corresponds to 44.1 48 ... 192 kHz); - "DigitalIn CLK source" selector (internal/external) (**); - "DigitalOut format SPDIF/AC3" switch (**); (**)E-mu-0404usb only. 2) Automatic device sample rate adjustment depending on substream samplerate for both capture and playback substream. [minor coding-style fixes by tiwai] Signed-off-by: Sergiy Kovalchuk <cnb_zerg@yahoo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: add Edirol UA-101 supportClemens Ladisch2009-12-141-1/+0
| | | | | | | Add experimental support for the Edirol UA-101 audio/MIDI interface. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: usb: make the USB MIDI module more independentClemens Ladisch2009-11-241-3/+4
| | | | | | | | | Remove the dependecy from the USB MIDI code on the snd_usb_audio structure. This allows using the USB MIDI module from another driver without having to pretend to be the generic USB audio driver. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: fix combine_word problemJulian Anastasov2009-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix combine_word problem where first octet is not read properly. The only affected place seems to be the INPUT_TERMINAL type. Before now, sound controls can be created with the output terminal's name which is a fallback mechanism used only for unknown input terminal types. For example, Line can wrongly appear as Speaker. After the change it should appear as Line. The side effect of this change can be that users can expect the wrong control name in their scripts or programs while now we return the correct one. Probably, these defines should use get_unaligned_le16 and friends. Signed-off-by: Julian Anastasov <ja@ssi.bg> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: usb-audio: make the MotU Fastlane work againClemens Ladisch2009-05-271-1/+1
| | | | | | | | | | | | | Kernel 2.6.18 broke the MotU Fastlane, which uses duplicate endpoint numbers in a manner that is not only illegal but also confuses the kernel's endpoint descriptor caching mechanism. To work around this, we have to add a separate usb_set_interface() call to guide the USB core to the correct descriptors. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: David Fries <david@fries.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb-audio: support for Edirol UA-4FX devicePedro Lopez-Cabanillas2008-10-101-1/+1
| | | | | | | | | | Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: usb-audio - Add ignore_ctl_error parameterTakashi Iwai2008-08-151-1/+2
| | | | | | | | | Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: Add USB US122L driverKarsten Wiese2008-08-011-0/+1
| | | | | | | | Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] usb audio suspend supportOliver Neukum2008-01-311-0/+1
| | | | | | | | | This patch implements suspend/resume support for USB audio devices. It works with the microphone in my camera. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] usbaudio - Add support for Edirol UA-101Bjoern Fay2007-02-091-0/+1
| | | | | | | | | | | | | | | | Added support for the Edirol UA-101 (only in high-speed mode) by taking the quirks for the UA-1000 and change them accordingly. Changes were made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h' MIDI and recording seem to work perfectly (with JACK), but playback gives some few glitches. I think that's the mentioned synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be synchronized to capture'), so I didn't change that. ToDo: Adding Mixer-Support for the built-in control-panel/patch-bay/router. Signed-off-by: Bjoern Fay <mail@bfay.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] USB midi: Remove duplicate CS_AUDIO_* #definesBen Williamson2006-06-221-7/+0
| | | | | | | | Removed the CS_AUDIO_* #defines, which were duplicates of the class-specific USB_DT_CS_* #defines in <linux/usb_ch9.h>. Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud