summaryrefslogtreecommitdiffstats
path: root/sound/soc
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'asoc-3.6' of ↵Takashi Iwai2012-09-1511-40/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for 3.6 A bigger set of updates than I'm entirely comfortable with - things backed up a bit due to travel. As ever the majority of these are small, focused updates for specific drivers though there are a couple of core changes. There's been good exposure in -next. The AT91 patch fixes a build break.
| * ASoC: wm8904: correct the indexBo Shen2012-09-141-1/+1
| | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: tegra: fix maxburst settings in dmaengine codeStephen Warren2012-09-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The I2S controllers are programmed with an "attention" level of 4 DWORDs. This must match the configuration passed to the DMA driver, so that when they burst in data, they don't overflow the available FIFO space. Also, the burst size is relevant to the destination for playback, and source for capture, not vice-versa as originally written. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: samsung dma - Don't indicate support for pause/resume.Dylan Reid2012-09-061-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pause and resume operations indicate that the stream can be un-paused/resumed from the exact location they were paused/suspended. This is not true for this driver, the pause and suspend triggers share the same code path with stop, they flush all pending DMA transfers. This drops all pending samples. The pause_release/resume triggers are the same as start, except that prepare won't be called beforehand, nothing will be enqueued to the DMA engine and nothing will happen (no audio). Removing the pause flag will let apps know that it isn't supported. Removing the resume flag will cause user space to call prepare and start instead of resume, so audio will continue playing when the system wakes up. Before removing the pause and resume flags, I tested this on an exynos 5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a write error. Suspend/resume testing led to the same result. Removing the two flags fixes suspend/resume (since snd_pcm_prepare is called again). And leads to a proper reporting of pause not supported. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: mc13783: Remove mono supportFabio Estevam2012-09-061-4/+4
| | | | | | | | | | | | | | | | | | | | Playing a mono track on a mc13783 codec results in incorrect playback rate. Remove mono support so that a mono track can be played correctly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Gaëtan Carlier <gcembed@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: arizona: Fix typo in 44.1kHz ratesHeather Lomond2012-09-061-1/+1
| | | | | | | | | | Signed-off-by: Heather Lomond <hlomond@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: spear: correct the check for NULL dma_buffer pointerPrasad Joshi2012-08-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The if condition if (!buf && !buf->area) checks if the buf pointer is NULL and then dereferences it again to check if the buffer area is NULL, resulting in possible NULL dereference. Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * sound: tegra_alc5632: remove HP detect GPIO inversionStephen Warren2012-08-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | Both the schematics and practical testing show that the HP detect GPIO is high when the headphones are plugged in. Hence, the snd_soc_jack_gpio should not specify to invert the signal. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@vger.kernel.org> # v3.4 v3.5
| * ASoC: dapm: Don't force card bias level to be updatedMark Brown2012-08-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) means that any DAPM context being updated will have the bias level automatically set, including the card. We can't safely do this as the card callbacks are called for each device context and so the management of the card bias is more complex. Several multi-component cards rely on this behaviour. Skip updates during the asynchronous run entirely. We should really do them in the synchronous section but it's not 100% clear which values to pick as the different DAPM contexts may have different bias levels. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: dapm: Make sure we update the bias level for CODECs with no opMark Brown2012-08-251-0/+2
| | | | | | | | | | | | | | | | | | Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) ensures that we update non-CODEC DAPM contexts but means that if a CODEC has no set_bias_level() operation it'll not be updated. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: am3517evm: fix error return codeJulia Lawall2012-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was forgotten to initialize ret to the result of calling snd_soc_dai_set_sysclk, unlike at the other calls in the same function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ux500_msp_i2s: better use devm functions and fix error return codeJulia Lawall2012-08-201-20/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnecessary calls to devm_kfree and replace iounmap by devm_iounmap (and use resource_size for the third argument). These changes make it possible to remove the error-handling code at the end of ux500_msp_i2s_init_msp, and all of the gotos become direct returns. In the case of the second call to devm_kzalloc, the return variable ret was not initialized. Here it is changed to a direct return of -ENOMEM. A simplified version of the semantic match that finds the second problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-sgtl5000: fix error return codeJulia Lawall2012-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize ret on the second call to imx_audmux_v2_configure_port so that the subsequent test checks that result and not the previous one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * Merge tag 'sound-3.6' of ↵Linus Torvalds2012-08-0318-13/+64
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes for ASoC, mainly against regressions due to the defaulting regmap i/o, in addition to a HD-audio fixup." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: core: Fix check before defaulting to regmap ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC ASoC: wm8962: Allow VMID time to fully ramp ASoC: AC97 doesn't use regmap by default ASoC: sgtl5000: enable VAG_POWER for LINE_IN ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements ASoC: omap: Add missing modules aliases to get sound working on omap devices sound: tegra_alc5632: Adjust to of_get_named_gpio() change sound: tegra_wm8903: Adjust to of_get_named_gpio() change ASoC: mc13783: Provide codec->control_data ASoC: ux500: Include the correct header files ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work ASoC: mxs-saif: fix clock prepare and enable unbalance issue ASoC: wm8994: Ensure there are enough BCLKs for four channels
* | | ASoC: wm9712: Fix inverted capture volumeMark Brown2012-08-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The capture volume increases with the register value so it shouldn't be flagged as inverted. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: wm9712: Fix microphone source selectionMark Brown2012-08-171-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* | | ASoC: wm5102: Remove DRC2Mark Brown2012-08-171-16/+0
| | | | | | | | | | | | | | | | | | It will be removed from future device revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: jack: Always notify full jack statusMark Brown2012-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | Don't just notify for the bits we've updated, notify the full state of the jack otherwise users might get confused by misleading reports. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: wm5110: Add missing input PGA routesMark Brown2012-08-131-0/+12
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: wm5102: Add missing input PGA routesMark Brown2012-08-131-0/+9
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Samsung: Fix build errorSachin Kamat2012-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build error: In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0, from arch/arm/plat-samsung/include/plat/dma-ops.h:17, from arch/arm/plat-samsung/include/plat/dma.h:128, from sound/soc/samsung/pcm.c:23: arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8: error: redefinition of ‘struct s3c2410_dma_client’ arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here make[3]: *** [sound/soc/samsung/pcm.o] Error 1 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: core: Upgrade the severity of probe deferral errors to dev_err()Mark Brown2012-08-091-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past when ASoC had a custom probe deferral mechanism people complained about the logspam it generated and didn't want to know about the fact that we were doing probe deferral so all the error messages for it were at dev_dbg(), making diagnostics hard. Now that we have probe deferral as an accepted thing and it's generating log messages anyway there's no need to worry about this so upgrade the severity of all the probe deferral sources to dev_err() so that they are displayed by default. Also add one for missing aux_devs since there wasn't one. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: wm8994: Add missing dapm routes for WM8958 rev AChris Rattray2012-08-091-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Chris Rattray <crattray@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: wm8962: Don't duplicate bias level management in resumeMark Brown2012-08-091-15/+0
| | | | | | | | | | | | | | | | | | | | | The core will bring the bias level up for us since we use idle_bias_off, duplicating this may be harmful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: bfin: fix memory leak in sport3 controller driverScott Jiang2012-08-091-0/+7
| | | | | | | | | | | | | | | Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Davinci: McASP: Flush the FIFO before enablingVaibhav Bedia2012-08-091-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | FIFO should be flushed before it is enabled for the first time. This fixes the I/O errors reported by the ASoC core on a fresh boot Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: imx-ssi: Remove mono supportFabio Estevam2012-08-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Playing a mono track results in incorrect playback rate, ie, the audio is played at a faster rate. Remove mono support in the driver by setting 'channes_min' to dual-channel and this allows mono tracks to be played correctly. Reported-by: Gaëtan Carlier <gcembed@gmail.com> Tested-by: Gaëtan Carlier <gcembed@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: mxs: Fix the name of the SoC familyFabio Estevam2012-08-081-1/+1
| | | | | | | | | | | | | | | | | | | | | SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: omap-mcbsp: Fix 6pin mux configurationPeter Ujfalusi2012-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad <cfadad@rocketmail.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org (3.4+)
* | | Merge tag 'asoc-3.6' of ↵Mark Brown2012-08-0318-13/+64
|\ \ \ | |/ / |/| / | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.6 ASoC: Additional updates for 3.6 A few updates for issues discovered during the merge window, the main one being the fix for the issues with defaulting to use of regmap without properly checking if there was I/O in place already.
| * ASoC: core: Fix check before defaulting to regmapMark Brown2012-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | Check if the chip has provided a write operation (which is mandatory for I/O) rather than looking for control data as some of the MFDs use a global for this. Also skip the attempt if there's no regmap available by device in case things get confused by the attempt to default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
| * ASoC: wm8962: Allow VMID time to fully rampMark Brown2012-07-311-0/+3
| | | | | | | | | | | | | | Required for reliable power up from cold. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: AC97 doesn't use regmap by defaultManuel Lauss2012-07-314-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 38cbf9598feba97de9f9b43efa9153fd7c1a2ec9 ("ASoC: core: Try to use regmap if the driver doesn't set up any I/O") any ASoC codec which doesn't set codec::control_data is assumed to use regmap. That doesn't work with AC97 so this workaround sets the codec::control_data member to a random value to restore proper behaviour. Tested with WM9712. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: sgtl5000: enable VAG_POWER for LINE_INDong Aisheng2012-07-311-0/+1
| | | | | | | | | | | | | | | | | | LINE_IN also needs VAG_POWER on or we may hear noise when directly route LINE_IN to Headphone Mux. Tested on imx28evk. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ab8500: Inform SoC Core that we have our own I/O arrangementsLee Jones2012-07-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If codec->control_data is not populated SoC Core assumes we want to use regmap, which fails catastrophically, as we don't have one: Unable to handle kernel NULL pointer dereference at virtual address 00000080 pgd = c0004000 [00000080] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 Not tainted (3.5.0-rc6-00884-g0b2419e-dirty #130) PC is at regmap_read+0x10/0x5c LR is at hw_read+0x80/0x90 pc : [<c01a91b8>] lr : [<c0216804>] psr: 60000013 Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: omap: Add missing modules aliases to get sound working on omap devicesGuillaume Gardet2012-07-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add missing modules aliases to get sound working on omap devices. Tested on Beagleboard xM rev. B. This patch is against 3.5-rc6 vanilla. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org> From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET <guillaume.gardet@oliseo.fr> Date: Tue, 10 Jul 2012 13:47:16 +0200 Subject: [PATCH] Add missing modules aliases to fix audio on omap devices Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * sound: tegra_alc5632: Adjust to of_get_named_gpio() changeRoland Stigge2012-07-261-1/+1
| | | | | | | | | | | | | | | | | | of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_alc5632 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * sound: tegra_wm8903: Adjust to of_get_named_gpio() changeRoland Stigge2012-07-261-5/+5
| | | | | | | | | | | | | | | | | | of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_wm8903 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: mc13783: Provide codec->control_dataFabio Estevam2012-07-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If codec->control_data is not provided, the following crash happens: Unable to handle kernel NULL pointer dereference at virtual address 00000078 pgd = 80004000 [00000078] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.5.0-next-20120725+ #1263) PC is at regmap_read+0x18/0x64 LR is at hw_read+0x50/0x98 pc : [<802bcd90>] lr : [<803cad18>] psr: 60000013 ... Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ux500: Include the correct header filesLee Jones2012-07-263-3/+3
| | | | | | | | | | | | | | | | | | Thought to be another merge error, board-mop500-msp.h has never existed in the upstream kernel, only msp.h. This patch changes the include files to match the existing file name. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQsMark Brown2012-07-241-0/+13
| | | | | | | | | | | | | | | | Ensures that we don't interact badly with the power management framework, especially in the cases where we're doing deferred work or we're using a direct GPIO for these signals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probeDong Aisheng2012-07-241-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a driver bug that sgtl5000 dapm widget kcontrols do not work. e.g. can not select capture mux with amixer tool(no error info prompted). The root cause is that we still call snd_soc_dapm_new_widgets in codec driver probe function afer converting to table based widgets. This will cause the card dapm widgets are instantiated before the dapm_routes are registered. Then, no available dapm widget pathes can be found during instantiation which finally will cause soc_dapm_mux_update_power to fail(can not find correct path with kcontrol) in snd_soc_dapm_put_enum_double function. Here we remove the unneeded snd_soc_dapm_new_widgets in codec probe and let the soc core to handle the register sequence properly. Then we can fix above issue. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: mxs-saif: set a base clock rate for EXTMASTER mode workDong Aisheng2012-07-241-1/+15
| | | | | | | | | | | | | | | | | | | | | | Set an initial clock rate for the saif internal logic to work properly. This is important when working in EXTMASTER mode that uses the other saif's BITCLK&LRCLK but it still needs a basic clock which should be fast enough for the internal logic. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: mxs-saif: fix clock prepare and enable unbalance issueDong Aisheng2012-07-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we directly call a clock_enable in trigger function without a clk_prepare as pair first. This will cause system hang immediately when run capture because the clock was not prepared(playback does not hang because the clock was prepared already by get_mclk before), a warning message in clock framework may cause a deadlock to reclaim clock lock (see: pl011_console_write). Here we prepare clock first in hw_param, then enable it in trigger function to guarantee the balance. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8994: Ensure there are enough BCLKs for four channelsMark Brown2012-07-231-1/+1
| | | | | | | | | | | | | | | | Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* | Merge tag 'mfd-3.6-1' of ↵Linus Torvalds2012-07-301-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
| * | mfd: Fix twl6040 revision informationPeter Ujfalusi2012-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | twl6040 ES1.1 and ES1.2 have the same revid (0x01). ES1.3 of twl6040 REVID is 0x02. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-07-261-1/+7
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and a short series of fixes for marvell platforms that didn't make it in before 3.5." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: fix compile error caused by prom_update_property change ARM: dt: tegra trimslice: enable USB2 port ARM: dt: tegra trimslice: add vbus-gpio property ARM: vt8500: Add maintainer for VT8500 architecture ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. ARM: versatile: Don't use platform clock for Integrator & VE ARM: tegra: harmony: add regulator supply name and its input supply
| * \ \ Merge branch 'v3.5-rc7-fixes' of git://github.com/lunn/linux into fixesArnd Bergmann2012-07-251-1/+7
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Andrew Lunn <andrew@lunn.ch>: * 'v3.5-rc7-fixes' of git://github.com/lunn/linux: ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | ARM: Orion: fix driver probe error handling with respect to clkSimon Baatz2012-07-251-1/+7
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clk patches added code to get and enable clocks in the respective driver probe functions. If the probe function failed for some reason after enabling the clock, the clock was not disabled again in many cases. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lumm <andrew@lunn.ch>
OpenPOWER on IntegriCloud