summaryrefslogtreecommitdiffstats
path: root/sound/soc
Commit message (Collapse)AuthorAgeFilesLines
* Merge remote-tracking branch 'asoc/fix/wm8731' into asoc-linusMark Brown2015-02-051-0/+2
|\
| * ASoC: wm8731: init mutex in i2c init pathManuel Lauss2015-01-271-0/+2
| | | | | | | | | | | | | | | | | | The I2C init path forgot to init the mutex, leading to an oops when controls are accessed. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | Merge remote-tracking branch 'asoc/fix/tlv320aic3x' into asoc-linusMark Brown2015-02-051-1/+1
|\ \
| * | ASoC: tlv320aic3x: Fix data delay configurationPeter Ujfalusi2015-01-301-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the issue introduced by: 368494093354 ASoC: tlv320aic3x: Add TDM support The CTRLC register were not receiving the correct delay configuration, which will corrupt DSP_A audio mode. Fixes: 368494093354 (ASoC: tlv320aic3x: Add TDM support) Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linusMark Brown2015-02-051-5/+8
|\ \
| * | ASoC: sgtl5000: add delay before first I2C accessEric Nelson2015-02-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To quote from section 1.3.1 of the data sheet: The SGTL5000 has an internal reset that is deasserted 8 SYS_MCLK cycles after all power rails have been brought up. After this time, communication can start ... 1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * | ASoC: sgtl5000: Use shift mask when setting codec modeFilip Brozovic2015-01-301-5/+5
| |/ | | | | | | | | | | | | | | | | Shift the I2S mode value by the necessary amount before writing the registers. This makes Right Justified and PCM mode work in addition to the default Left Justified mode. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge remote-tracking branch 'asoc/fix/rt5640' into asoc-linusMark Brown2015-02-051-0/+1
|\ \
| * | ASoC: rt5640: Add RT5642 ACPI ID for Intel BaytrailJarkko Nikula2015-01-261-0/+1
| |/ | | | | | | | | | | | | | | | | Asus T100TAF uses ACPI ID "10EC5642" for its audio codec. I suppose it is updated ACPI ID for the RT5642 codec since some earlier platforms are using "10EC5640" with the RT5642 too. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown2015-02-051-2/+2
|\ \
| * | ASoC: Intel: Used lock version to update shim registersJie Yang2015-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need hold lock each time updating shirm registers, otherwise, we may set unexpected values to them when they are set in different thread at different time sequence. The notification work will be scheduled in global work queue, which won't hold this sst->spinlock itself, so here we need change to use the lock version to update shim registers. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linusMark Brown2015-02-051-17/+7
|\ \ \
| * | | ASoC: atmel_ssc_dai: fix the setting for DSP modeBo Shen2015-01-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SCC work in DSP A mode, the data outputs/inputs are shift out on falling edge, the frame sync are sample on the rising edge. Reported-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | ASoC: atmel_ssc_dai: fix start event for I2S modeBo Shen2015-01-271-14/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | |
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
*-------. \ \ Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/simple', ↵Mark Brown2015-01-265-17/+39
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/ts3a227e', 'asoc/fix/wm8904' and 'asoc/fix/wm8960' into asoc-linus
| | | | | * | | ASoC: wm8960: Fix capture sample rate from 11250 to 11025Zidan Wang2015-01-061-1/+1
| | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by: Zidan Wang <b50113@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | | * | | ASoC: wm8904: fix runtime warningBo Shen2015-01-141-8/+15
| | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the path name for mux to get rid of the following warning: --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<--- Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: ts3a227e: Check and report jack status at probeCheng-Yi Chiang2015-01-051-0/+6
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ts3a227e does not trigger interrupt to report jack status when system boots from warm reset because ts3a227e's power remains on during warm reset. Read jack status at probe to get current jack status. Note that if system boots from EC reset, then this issue will not happen. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | ASoC: simple-card: Fix crash in asoc_simple_card_unref()Geert Uytterhoeven2015-01-141-4/+3
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If asoc_simple_card_probe() fails, asoc_simple_card_unref() may be called before dev_set_drvdata(), causing a NULL pointer dereference in asoc_simple_card_unref(): Unable to handle kernel NULL pointer dereference at virtual address 000000d4 ... PC is at asoc_simple_card_unref+0x14/0x48 LR is at asoc_simple_card_probe+0x3d4/0x40c This typically happens because asoc_simple_card_parse_of() returns -EPROBE_DEFER, but other failure modes are possible. devm_snd_soc_register_card()/snd_soc_register_card() may fail either before or after dev_set_drvdata(). Pass a snd_soc_card pointer instead of a platform_device pointer to asoc_simple_card_unref() to fix this. Note that if CONFIG_OF_DYNAMIC=n, of_node_put() is a dummy, and gcc may optimize away the loop over card->dai_link, never actually dereferencing card, and thus avoiding the crash... Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e512e001dafa54e5 ("ASoC: simple-card: Fix the reference count of device nodes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * | | ASoC: rt5677: Modify the behavior that updates the PLL parameter.Oder Chiou2015-01-091-4/+14
| |/ / | | | | | | | | | | | | | | | | | | | | | The patch modified the behavior that updates the PLL parameter. It set the update bit before the PLL power up. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | |
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
| \ \
*-------------. \ \ Merge remote-tracking branches 'asoc/fix/adi', 'asoc/fix/compress', ↵Mark Brown2015-01-269-16/+52
|\ \ \ \ \ \ \ \ \ \ | | | | | | |_|_|_|/ | | | | | |/| | | | | | | | | | | | | | 'asoc/fix/fsl-ssi', 'asoc/fix/imx', 'asoc/fix/intel', 'asoc/fix/omap', 'asoc/fix/rockchip' and 'asoc/fix/rt286' into asoc-linus
| | | | | | | | * | ASoC: rt286: set the same format for dac and adcBard Liao2015-01-151-4/+2
| | | | | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is only one I2S I/F, AD/DA path must operate to the same format. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | | * | ASoC: rockchip: i2s: applys rate symmetry for CPU DAIJianqun Xu2015-01-081-0/+1
| | | | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applys rate symmetry for rockchip i2s DAI. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | * | ASoC: omap-mcbsp: Correct CBM_CFS dai format configurationPeter Ujfalusi2015-01-161-1/+1
| | | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should select FSR also to be driven by McBSP, not only FSX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | | | * | ASoC: Intel: Add NULL checks for the stream pointerJie Yang2015-01-071-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should not send IPC stream commands to FW when the stream is NULL, dereference the NULL pointer may also occur without precheck. Here add NULL pointer checks for these stream APIs. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | ASoC: Intel: Don't change offset of block allocator during fixed allocateJie Yang2015-01-051-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The offset of block allocator, ba->offset, should not be changed during fixed address allocating, for the caller may treat it as the offset of allocated memory and use it. In the case that we allocate more than 1 blocks, we should make sure this offset is correct. Here introduces a temp allocator for the later continuous allocating. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | ASoC: fsl: imx-wm8962: Set the card owner fieldFabio Estevam2015-01-141-0/+1
| | | | | |/ | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following crash happens when trying to unload the snd_soc_imx_wm8962 module while playback is active: [ 208.666868] Unable to handle kernel paging request at virtc [ 208.674110] pgd = 80004000 [ 208.676867] [7f06541c] *pgd=4c334811, *pte=00000000, *ppte=00000000 [ 208.683211] Internal error: Oops: 80000007 [#1] SMP ARM [ 208.688445] Modules linked in: snd_soc_wm8962 snd_soc_fsl_ssi snd_soc_imx_audmux imx_pcm_fiq evbug] ... In order to avoid such problem, fill the card owner field as suggested by Lars-Peter Clausen: "But looking at the source it seems that this is a core feature of ALSA and at least for the card module itself it will do the ref-counting when a stream is started/stopped. And we even support setting the owner of a card in ASoC. It's just that pretty much no ASoC card driver bothers to set the owner field in the snd_soc_card struct. So this particular problem can be fixed by updating the imx-wm8962 driver to set the owner field." By doing as suggested, we no longer see the crash when attempting to unload the snd_soc_imx_wm8962 module while playback is active: $ modprobe -r snd_soc_imx_wm8962 modprobe: can't unload module snd_soc_imx_wm8962: Resource temporarily unavailable Reported-by: Jiada Wang <jiada_wang@mentor.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: fsl_ssi: Fix irq error checkFabio Estevam2015-01-081-2/+2
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2ffa531078037a0 ("ASoC: fsl_ssi: Fix module unbound") changed the way to retrieve the irq number from irq_of_parse_and_map() to platform_get_irq(), but missed to updated the irq error check accordingly. We should test for negative irq number and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | ASoC: soc-compress.c: fix NULL dereferenceQais Yousef2015-01-151-3/+6
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In soc_new_compress() when rtd->dai_link->dynamic is set, we create the pcm substreams with this call: ret = snd_pcm_new_internal(rtd->card->snd_card, new_name, num, 1, 0, &be_pcm); which passes 0 as capture_count leading to be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream being NULL, hence when trying to set rtd a few lines below we get an oops. Fix by using rtd->dai_link->dpcm_playback and rtd->dai_link->dpcm_capture as playback_count and capture_count to snd_pcm_new_internal(). Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * | | ASoC: adi: Add missing return statement.Andrew Jackson2015-01-051-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe routine was disabling the clock even if the system was configured successfully. Add a return statement to leave clocks enabled. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge remote-tracking branch 'asoc/fix/pcm512x' into asoc-linusMark Brown2015-01-261-1/+1
|\ \ \
| * | | ASoC: pcm512x: Fix DSP program selectionPeter Rosin2015-01-091-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | The DSP programs are listed out of order. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | | Merge remote-tracking branch 'asoc/fix/fsl-esai' into asoc-linusMark Brown2015-01-261-1/+1
|\ \ \
| * | | ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registersAurelien BOUIN2014-12-301-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | The xDC field should have 5 bit width according to Reference Manual. Thus this patch fixes it. Signed-off-by: Aurelien BOUIN <a_bouin@yahoo.fr> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | |
| \ \
| \ \
| \ \
| \ \
| \ \
*-----. \ \ Merge remote-tracking branches 'asoc/fix/dwc', 'asoc/fix/intel', ↵Mark Brown2014-12-248-31/+47
|\ \ \ \ \ \ | | | |_|_|/ | | |/| | | | | | | | | 'asoc/fix/rockchip' and 'asoc/fix/rt5677' into asoc-linus
| | | | * | ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panicFang, Yang A2014-12-241-4/+5
| | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_kcontrol_chip should return snd_soc_component instead of snd_soc_codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: rockchip: i2s: fix maxburst of dma data to 4Jianqun Xu2014-12-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since RK3288 DMAC's burst length only support max to 4, here set maxburst of playback and capture dma data to 4. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: rockchip: i2s: fix error defination of transmit data levelJianqun Xu2014-12-241-1/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to description about "Transmit Data Level", This bit field controls the level at which a DMA request is made by the transmit logic. It is equal to the watermark level. That is, the dma_tx_req signal is generated when the number of valid data entries in the TXFIFO (TXFIFO0 if CSR=00 TXFIFO1 if CSR=01 TXFIFO2 if CSR=10 TXFIFO3 if CSR=11) is equal to or below this field value. Different to receive data level, transmit data level does not need to "-1". Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: Intel: correct the fixed free block allocationJie Yang2014-12-241-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For block span more than 1 section, when allocate it from a free block, we need allocate the remain buffers within the block, and then continue alloc the rest of needed size buffer. Here also make sure this free block is moved from free list to used list, and add it to block_list which may be used for power gating disabling later. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: Intel: Fix BYTCR machine driver MODULE_ALIASJarkko Nikula2014-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_soc_sst_bytcr_dpcm_rt5640 doesn't autoload because MODULE_ALIAS doesn't match with "bytt100_rt5640" platform device. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: Intel: Fix BYTCR firmware nameJarkko Nikula2014-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BYTCR DSP firmware is in intel/ subdirectory. See linux-firmware.git commit d562a3b63632 ("linux-firmware: add sst audio firmware for baytrail platforms"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: Intel: Add I2C dependency to two new machinesJarkko Nikula2014-12-221-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following build error when CONFIG_I2C is not enabled: sound/soc/codecs/rt5640.c:2252:1: warning: data definition has no type or storage class module_i2c_driver(rt5640_i2c_driver); ^ sound/soc/codecs/rt5640.c:2252:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] sound/soc/codecs/rt5640.c:2252:1: warning: parameter names (without types) in function declaration sound/soc/codecs/rt5640.c:2241:26: warning: ‘rt5640_i2c_driver’ defined but not used [-Wunused-variable] static struct i2c_driver rt5640_i2c_driver = { ^ cc1: some warnings being treated as errors Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: dwc: Iterate over all channelsAndrew Jackson2014-12-221-19/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Designware core can be configured with up to four stereo channels. Each stereo channel is individually configured so, when the driver's hw_params call is made, each requested stereo channel has to be programmed. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: dwc: Ensure FIFOs are flushed to prevent channel swapAndrew Jackson2014-12-221-0/+14
| |/ | | | | | | | | | | | | | | | | | | Flush the FIFOs when the stream is prepared for use. This avoids an inadvertent swapping of the left/right channels if the FIFOs are not empty at startup. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown2014-12-241-9/+5
|\ \ | |/ |/|
| * ASoC: dapm: Remove snd_soc_of_parse_audio_routing() due to deferred probeMark Brown2014-12-191-9/+5
| | | | | | | | | | | | | | | | | | | | | | This reverts commit f8781db8aeb18d (ASoC: dapm: Augment existing card DAPM routes in snd_soc_of_parse_audio_routing) since it is broken for deferred probing as it ends up storing data allocated with devm_ over multiple instantiations of the device. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge tag 'pm-config-3.19-rc1' of ↵Linus Torvalds2014-12-201-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki: "This removes the last few uses of CONFIG_PM_RUNTIME introduced recently and makes that config option finally go away. CONFIG_PM will be available directly from the menu now and also it will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION is set" * tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Eliminate CONFIG_PM_RUNTIME tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
| * | sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sst-haswell-pcm driver is a new user of CONFIG_PM_RUNTIME. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in sound/soc/intel/sst-haswell-pcm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
* | | Merge tag 'sound-fix-3.19-rc1' of ↵Linus Torvalds2014-12-196-7/+20
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few fixes that have landed after the previous pull request. All are driver specific fixes including: - error/int value fixes in OXFW, - Intel Skylake HD-audio HDMI codec support, - Additional HD-audio Realtek codecs and AD1986A codec fixes/quirks, - a few more DSD support and a quirk for Arcam rPAC in usb-audio, - a typo fix for Scarlett 6i6, - fixes for new ASIHPI firmware, - ASoC Exynos7 cleanups, - Intel ACPI support, and - a fix for PCM512 register cache sync" * tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC ALSA: hda/realtek - New codec support for ALC298 ALSA: asihpi: update to HPI version 4.14 ALSA: asihpi: increase tuner pad cache size ALSA: asihpi: relax firmware version check ALSA: usb-audio: Fix Scarlett 6i6 initialization typo ALSA: hda - Add quirk for Packard Bell EasyNote MX65 ALSA: usb-audio: add native DSD support for Matrix Audio DACs ALSA: hda/realtek - New codec support for ALC256 ALSA: hda/realtek - Add new Dell desktop for ALC3234 headset mode ASoC: Intel: fix possible acpi enumeration panic ALSA: hda/hdmi - apply Haswell fix-ups to Skylake display codec ASoC: Intel: fix return value check in sst_acpi_probe() ALSA: hda - Make add_stereo_mix_input flag tristate ALSA: hda - Create capture source ctls when stereo mix input is added ALSA: hda - Fix typos in snd_hda_get_int_hint() kerneldoc comments ALSA: hda - add codec ID for Skylake display audio codec ALSA: oxfw: some signedness bugs ALSA: oxfw: fix detect_loud_models() return value ASoC: rt5677: add REGMAP_I2C and REGMAP_IRQ dependency ...
| * | Merge tag 'asoc-v3.19-2' of ↵Takashi Iwai2014-12-166-7/+20
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Merge window fixes for v3.19 A smattering of driver specific fixes here, some more cleanup of the Exynos7 and Intel ACPI support plus a fix for register cache sync on the pcm512x driver which has been lurking for a while.
OpenPOWER on IntegriCloud