summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8994.c
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: WM8994: Ensure MICBIAS is provided with a clockDimitris Papastamos2011-03-011-0/+13
| | | | | | | | | The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-2.6.38' into for-2.6.39Mark Brown2011-03-011-9/+42
|\
| * ASoC: WM8994: Ensure late enable events are processed for the ADCsDimitris Papastamos2011-03-011-3/+23
| | | | | | | | | | | | | | | | | | | | | | Ensure that the ADCs are provided with a clock as the previous patch "ASoC: WM8994: Improve playback robustness" did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionalyDimitris Papastamos2011-03-011-6/+19
| | | | | | | | | | | | | | | | | | | | | | Since we began using the late clock disable functionality, ensure that we don't disable the clock if any of the ADC or DAC paths are still enabled. This happens when we have simultaneous playback and recording. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | ASoC: Simplify default WM8958 jack detection codeMark Brown2011-02-221-34/+4
| | | | | | | | | | | | | | | | | | | | | | | | The default WM8958 jack detection handler implements a full set of buttons and also support for video detection. Support for multi-button jacks is fairly system specific and will usually require some tuning for headsets so simplify the implementation to only report a simple short to ground button, leaving multi-button headsets to be handled by system specific code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Support configuration of WM8958 microphone bias analogue parametersMark Brown2011-02-221-0/+7
| | | | | | | | | | | | | | | | The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Support WM8958 direct microphone detection IRQMark Brown2011-02-221-22/+35
| | | | | | | | | | | | | | | | Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge branch 'for-2.6.38' into for-2.6.39Mark Brown2011-02-221-3/+2
|\ \ | |/
| * ASoC: Fix WM8958 default microphone detection argument orderingMark Brown2011-02-221-3/+2
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Fix missing space in WM8994Mark Brown2011-02-181-1/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge branch 'for-2.6.38' into for-2.6.39Mark Brown2011-02-131-14/+183
|\ \ | |/
| * ASoC: WM8994: Improve playback robustnessDimitris Papastamos2011-02-131-7/+52
| | | | | | | | | | | | | | | | | | | | On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: WM8994: Improve robustness in some use casesDimitris Papastamos2011-02-131-9/+133
| | | | | | | | | | | | | | | | | | | | | | | | Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | Merge branch 'for-2.6.38' into for-2.6.39Mark Brown2011-02-031-4/+22
|\ \ | |/
| * ASoC: Improve WM8994 digital power sequencingMark Brown2011-02-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | On WM8994 revision D and earlier ensure optimal sequencing with simultaneous usage of AIF1 and AIF2 by tying the signals together so if paths through both are connected the streams are started simultaneously. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
| * ASoC: Create an AIF1ADCDAT signal widget to match AIF2Mark Brown2011-02-031-4/+10
| | | | | | | | | | | | | | | | | | | | Due to the different routing for AIF1 and AIF2 we weren't using a single widget to represent the ADCDAT signal. For consistency add one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
* | Merge branch 'for-2.6.38' into for-2.6.39Mark Brown2011-01-191-1/+1
|\ \ | |/
| * ASoC: WM8994: fix wrong value in tristate functionQiao Zhou2011-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | ASoC: Update users of readable_register()/volatile_register()Dimitris Papastamos2011-01-131-5/+5
|/ | | | | | Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Yet more x86 tracepoint workaroundsMark Brown2010-12-291-0/+4
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Trace Wolfson jack detection IRQsMark Brown2010-12-221-0/+5
| | | | | | | Add jack detection interrupt trace to Wolfson CODEC drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Fix WM8994/58 3D stereo control definitionsMark Brown2010-12-211-3/+3
| | | | | | | Cut'n'paste in the register names. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Fix widgets for WM8994/58 AIF2 source controlMark Brown2010-12-131-4/+4
| | | | | | | | The compiler really ought to have been warning about unreferenced variables... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Implement WM8994/58 DAC and ADC oversampling controlMark Brown2010-12-101-0/+13
| | | | | | | | The oversampling rate of the DAC and ADC can be controlled to optimise for either low power consumption or maximum performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Add ADC high pass filter support to WM8994Uk Kim2010-12-081-0/+22
| | | | | | Signed-off-by: Uk Kim <w0806.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Support WM8994 mono AIF configurationsMark Brown2010-12-081-6/+15
| | | | | | | | | The WM8994 supports mono signals - enable this in the driver. With DSP mode an automatic data channel selector is available, activate this when in mono mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: When disabling WM8994 FLL force a source selectionMark Brown2010-12-031-0/+1
| | | | | | | | | | | | | | | | | | When we disable the WM8994 FLL code path sharing means that we end up writing out a configuration. Currently this is the currently active input and output frequency (which causes snd_soc_update_bits() to suppress actual writes both immediately and in the common case where we reenable the same configuration later) but we allow machine drivers to pass through a source of zero. Since the register values written are one less than the source constants this causes corruption of other bitfields in the register. Fix this by using the most recently configured FLL source when none is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
* ASoC: Tune performance of WM8958 revision AMark Brown2010-12-021-9/+27
| | | | | | | | Update some of the default configuration for the device to improve the performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Allow user-specified WM8958 multiband compressor configurationsMark Brown2010-12-011-2/+82
| | | | | | | | | | The paramters of the WM8958 multiband compressor can be tuned by the user for their system using a graphical configuration tool on the host. Allow the user to specify a set of such paramters in platform data and select between them at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Correct event flags for WM8958 AIF DACsMark Brown2010-12-011-4/+4
| | | | | | | | We need a post notification as we need to shut down the MBC after the data stops flowing rather than before. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Implement runtime PM for WM8994/58Mark Brown2010-11-271-0/+10
| | | | | | | | | This allows us to communicate our power management state back to the parent device, allowing it to do a full power down when the device is idle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Enable rbtree compression for WM8994/58 register cacheMark Brown2010-11-271-0/+1
| | | | | | | | | The WM8994 and WM8958 register map is relatively sparse so benefits from compression. The rbtree compression gives better results than LZO for both memory and CPU consumption on a map as sparse as this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Convert WM8994 to use soc-cache.c cache functionsMark Brown2010-11-271-48/+47
| | | | | | | | | | | In the process we convert the driver to read registers one at a time when initialising the cache. This has the effect of working around limitations in the sizes of I2C transactions which can be done by some CPUs. Due to the sparseness of the register map the overhead from this should be minimual unless I2C transactions are very expensive to start. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Add WM8958 microphone detection supportMark Brown2010-11-271-0/+150
| | | | | | | | | | | | The WM8958 contains an advanced accessory detection feature which allows detection of up to seven different impedence levels on the microphone bias output, including detection of video outputs. Since some of the more involved accessory interfaces may involve noticable interactions with external components a simple detection scheme is provided by default with the option to provide custom handling of accessory detect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Add WM8958 Multi-band compressor supportMark Brown2010-11-271-12/+186
| | | | | | | | | | | The WM8958 features a multi-band compressor which can be enabled on any of the AIF inputs. The MBC allows different gains to be applied to differnt audio bands, providing an improvement in perceived loudness of the signal by avoiding overdriving the output transducers. This patch enables support for the MBC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Implement support for enhanced AIF3 on WM8958Mark Brown2010-11-271-9/+157
| | | | | | | | Additional audio routing options are available on the WM8958 audio interface 3. Add support for these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Initial WM8958 audio configurationMark Brown2010-11-271-34/+76
| | | | | | | | | | The WM8958 is a WM8994 derivative. This patch merely ensures that some revision specific configuration for WM8994 is not enabled on WM8994, additional patches will add support for the new features introduced on the WM8958. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge branch 'for-2.6.37' into for-2.6.38Mark Brown2010-11-231-0/+2
|\
| * ASoC: wm8994 - fix memory leaksAxel Lin2010-11-231-0/+2
| | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-2.6.37' into for-2.6.38Mark Brown2010-11-221-0/+2
|\ \ | |/
| * ASoC: Restore WM8994 volatile and readable register operationsMark Brown2010-11-221-0/+2
| | | | | | | | | | | | | | They went AWOL during the multi-component merge. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Do not include soc-dapm.hJarkko Nikula2010-11-221-1/+0
| | | | | | | | | | | | | | | | There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Move WM8994 read/write access data into separate fileMark Brown2010-11-191-1579/+3
| | | | | | | | | | | | | | Makes the WM8994 driver file itself substantially smaller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Provide ADC left/right channel source selection on WM8994Mark Brown2010-11-191-5/+22
| | | | | | | | | | | | | | | | | | | | Allow the application to choose if the ADC data presented on the left and right channels is sourced from the internal left or right channel. This allows a mono recording to be presented as stereo on the external bus. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge branch 'for-2.6.37' into for-2.6.38Mark Brown2010-11-171-0/+2
|\ \ | |/
| * ASoC: Fix register cache setup WM8994 for multi-componentMark Brown2010-11-171-0/+2
| | | | | | | | | | | | | | | | During the multi-component conversion the WM8994 register cache init got lost. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Decouple DAPM from CODECsLiam Girdwood2010-11-061-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Remove register write trace from WM8994Mark Brown2010-11-031-2/+0
| | | | | | | | | | | | | | | | We now have trace in the ASoC core so we don't need to our own trace in the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Store DC offset correction for wm_hubs devices in class W modeMark Brown2010-10-281-0/+3
|/ | | | | | | | | | | | | | | Providing the analogue configuration of the output path remains the same the DC offset corrected by the DC servo will remain identical so we can skip the callibration, reducing the startup time for the headphone output. Implement this for the wm_hubs devices as has been done for several other CODECs. Don't do this if we have any analogue paths enabled since offsets may be being introduced by the analogue paths which could vary outside the control of the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Remove unused vol field from WM8994 access mask tableJoe Perches2010-10-151-1574/+1573
| | | | | | | | | | | | | | | Remove unused vol from struct access_mask Reduces object size ~3kb. $ size sound/soc/codecs/wm8994.o* text data bss dec hex filename 40727 4384 4480 49591 c1b7 sound/soc/codecs/wm8994.o.new 43879 4384 4480 52743 ce07 sound/soc/codecs/wm8994.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
OpenPOWER on IntegriCloud