summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/rt5645.c
Commit message (Collapse)AuthorAgeFilesLines
* regmap: split up regmap_config.use_single_rwDavid Frey2018-09-071-3/+6
| | | | | | | | | | | | | | | | Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2018-06-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 320Hans de Goede2018-05-111-0/+9
| | | | | | | | | The Lenovo Ideapad Mixx 320 has a digital mic connected to DMIC2 add a DMI based quirk pointing to the intel_braswell_platform_data for devices with a mic on DMIC2. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 310Hans de Goede2018-05-111-0/+14
| | | | | | | | The Lenovo Ideapad Mixx 310 has a differential internal analog mic, add platform-data for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt5645/rt5677: replace codec to componentKuninori Morimoto2018-02-121-186/+184
| | | | | | | | | | | | | | | | | | | | | | | | | Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*---. Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt5645', ↵Mark Brown2018-01-121-65/+122
|\ \ \ | | | | | | | | | | | | 'asoc/topic/samsung' and 'asoc/topic/si476x' into asoc-next
| | * | ASoC: rt5645: add fallback case for jack detection supportPierre-Louis Bossart2018-01-121-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78f5605c0329 ("ASoC: rt5645: cleanup DMI matching code") did a lot of useful cleanups. This patch adds a default case to enable jack detection if there is no pdata, device property or quirk. The chosen jd-mode3 is the most common and should limit the addition of new DMI-based quirks. Existing DMI quirks which only set this mode are left as is and not removed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: add micbias power control select.Bard Liao2018-01-041-2/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: change micbias widget type to supply.Bard Liao2018-01-041-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register "micbias1" and "micbias2" to supply widgets as modern drivers do. This should not cause any (new) issues for existing users of the codec, since micbias support is broken anyways. Micbias support needs the RT5645_MICBIAS?_POW_CTRL_SEL bits in the RT5645_GEN_CTRL2 register to be updated when enabled/disabled which we currently do not do. The updating of these bits will be fixed in a follow-up commit. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: add platform data for the Teclast X80 Pro tabletHans de Goede2018-01-031-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Teclast X80 Pro tablet needs jd_mode = 3 for headset jack detection. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: cleanup DMI matching codeHans de Goede2018-01-031-73/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: set in2_diff flag for GPD win and pocket devicesHans de Goede2018-01-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPD pocket has a differential signal microphone and needs in2_diff to be set to avoid getting a very noisy signal. Since the GPD pocket and win use the same DMI strings, they share their platform data-definition, so enabling in2_diff on the pocket also sets it on the GPD win. The GPD win has a normal microphone, but setting in2_diff there does not negatively impact the sound from the microphone. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | ASoC: rt5645: Set card long_name for GPD win / pocketHans de Goede2017-12-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPD win and pocket devices both use the same codec setup and both have too generic dmi strings making snd_soc_set_dmi_name() not work. As these devices have only a single speaker we want a separate ucm file for them, which requires a unique long_name, use the existing GPD quirk handling to also provide a unique long_name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | |
| \ \ \
*-. \ \ \ Merge remote-tracking branches 'asoc/fix/msm8916', 'asoc/fix/nau8825', ↵Mark Brown2017-12-201-0/+2
|\ \ \ \ \ | | | |/ / | | |/| / | |_|_|/ |/| | | 'asoc/fix/rt5514' and 'asoc/fix/rt5645' into asoc-linus
| | * | ASoC: rt5645: reset RT5645_AD_DA_MIXER at probeBard Liao2017-11-221-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | RT5645_AD_DA_MIXER (0x29) register will not be reset to default after SW reset. So we have to write it to its default value in i2c_probe. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge tag 'asoc-v4.15' of ↵Takashi Iwai2017-11-131-6/+26
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
| * | ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2Akshu Agrawal2017-11-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minimum time required between power On of codec and read of RT5645_VENDOR_ID2 is 400msec. We should wait that long before reading the value. TEST=Cold boot the device and check for sound device. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: rt5645: remove unexisting route on new rt5645Bard Liao2017-10-311-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: rt5645: Make a few struct constJean Delvare2017-09-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These dmi_system_id structures and associated platform data are never modified so they can be marked const. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Bard Liao <bardliao@realtek.com> Cc: Oder Chiou <oder_chiou@realtek.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> -- sound/soc/codecs/rt5645.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ALSA: Convert timers to use timer_setup()Kees Cook2017-10-261-4/+3
|/ / | | | | | | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. These are all the "mechanical" changes remaining in the sound subsystem. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | dmi: Mark all struct dmi_system_id instances constChristoph Hellwig2017-09-141-1/+1
|/ | | | | | | | | | | | | ... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
*-. Merge remote-tracking branches 'asoc/topic/rt5563', 'asoc/topic/rt5616', ↵Mark Brown2017-09-011-3/+40
|\ \ | | | | | | | | | 'asoc/topic/rt5645', 'asoc/topic/rt5659' and 'asoc/topic/rt5663' into asoc-next
| | * ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devicesIan W MORRISON2017-08-311-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'. Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: make rt5645_platform_data constBhumika Goyal2017-08-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make these const as they are only used during a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct rt5645_platform_data s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct rt5645_platform_data s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: codecs: rt5645: add quirks for Asus T100HAPierre-Louis Bossart2017-08-231-0/+20
| |/ | | | | | | | | | | | | Fix jack detection and dmic setup Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: codecs: add const to snd_soc_codec_driver structuresBhumika Goyal2017-08-101-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Declare snd_soc_codec_driver structures as const as they are only passed as an argument to the function snd_soc_register_codec. This argument is of type const, so declare the structures with this property as const. In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in a copy operation along with getting passed to snd_soc_register_codec. So, it can be made const too. Done using Coccinelle: @match disable optional_qualifier@ identifier s; position p; @@ static struct snd_soc_codec_driver s@p={...}; @good1@ identifier match.s; position p; @@ snd_soc_register_codec(...,&s@p,...) @bad@ identifier match.s; position p!={match.p,good1.p}; @@ s@p @depends on !bad disable optional_qualifier@ identifier match.s; @@ static +const struct snd_soc_codec_driver s={...}; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'asoc/topic/rt5614', 'asoc/topic/rt5645', ↵Mark Brown2017-07-031-28/+68
|\ \ | | | | | | | | | 'asoc/topic/rt5651', 'asoc/topic/rt5665' and 'asoc/topic/rt5670' into asoc-next
| | * ASoC: rt5645: Add quirk override by module optionTakashi Iwai2017-06-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: enable speaker protection featuresBard Liao2017-06-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch is uploaded for enabling the speaker protection features of the audio codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: Add jack detection workaround for GPD WinTakashi Iwai2017-06-281-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPD Win requires jd_mode=3 and the inverted flag for making the jack detection working. Unfortunately, the BIOS doesn't give a nice way to match with DMI strings, and the only working way so far is to match with the board vendor/name/version/date to some known patterns. Hopefully other vendors won't do such a stupid setup, too... Thanks to Hans de Goede for the DMI matching suggestion. Suggested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: add inv_jd1_1 flagBard Liao2017-06-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flag will invert jd1_1 status. Which will be used if the jack connector is normal closed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: rename jd_invert flag in platform dataBard Liao2017-06-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jd_invert flag is actually used for level triggered IRQ. Rename it to let code more readable. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: read jd1_1 status for jd detectionBard Liao2017-06-281-23/+8
| |/ | | | | | | | | | | | | | | | | | | Read the jd status after invert control. The benefit is we don't need to invert the reading jd status when jd invert is needed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: rt5645: del btn_check_timer on removeHans de Goede2017-06-281-0/+1
|/ | | | | | | | The timer may still be running when rt5645_i2c_remove() gets called, call del_timer_sync() to make sure it is stopped. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'asoc/topic/rockchip', 'asoc/topic/rt5514', ↵Mark Brown2017-04-301-0/+10
|\ \ | | | | | | | | | 'asoc/topic/rt5645' and 'asoc/topic/rt5677' into asoc-next
| | * ASoc: rt5645: Add OF device ID tableJavier Martinez Canillas2017-04-051-0/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: of:N*T*Crealtek,rt5650C* alias: of:N*T*Crealtek,rt5650 alias: of:N*T*Crealtek,rt5645C* alias: of:N*T*Crealtek,rt5645 alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| |
| \
*-. \ Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt5640', ↵Mark Brown2017-02-191-3/+9
|\ \ \ | | |/ | |/| | | | 'asoc/topic/rt5645', 'asoc/topic/rt5659' and 'asoc/topic/rt5660' into asoc-next
| | * ASoC: rt5645: fix error handling for gpio detectionPierre-Louis Bossart2017-02-011-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Optional gpio handling should not cause an error status and prevent probing if it's missing. Remove error return for -ENOENT case and move error message to dev_info Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: rt5645: set high voltage for capless powerBard Liao2017-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The default capless power mode is low voltage mode. We should set it to high voltage mode to get fair headphone performance. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown2017-02-191-0/+2
|\ \ \ | |_|/ |/| |
| * | ASoc: rt5645: add ACPI ID 10EC3270Pierre-Louis Bossart2017-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | ALC3270 is a low-cost version of RT5645, add ACPI ID to enable probe and use rt5645 codec driver Tested on Asus T100HA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: rt5645: add support for RT5648Pierre-Louis Bossart2017-01-311-0/+1
| |/ | | | | | | | | | | | | | | add ACPI ID 10EC5648 found e.g on Asus X205TA and use rt5645 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: rt5645: set sel_i2s_pre_div1 to 2Bard Liao2017-01-091-0/+3
|/ | | | | | | | | | | | | | | The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codec duplicated callback function goes to component on rt5645Kuninori Morimoto2016-08-081-6/+8
| | | | | | | | | | codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown2016-07-241-2/+21
|\
| * ASoC: rt5645: Add ACPI ID 10EC5640Vinod Koul2016-07-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 [Jack detection] Suggested-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: rt5645: add DAC1 soft volume func controlBard Liao2016-07-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | This patch add an alsa control for DAC1 digital volume control function selection. The options are: 0: Gain update immediately 1: Gain update when a zero crossing 2: Gain update when a zero crossing with a soft ramp Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: rt5645: patch reg-0x8aBard Liao2016-07-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | reg-8a assign the tracking source for each ASRC tracker. The default value is 0x0000 which means all ASRC trackers will track LRCK1. But in most cases, we wish each ASRC tracker track the corresponding LRCK. i.e. ASRC1 tracks LRCK1, ASRC2 tracks LRCK2 and so on. So, we rewrite reg-8a as 0x0120. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown2016-07-241-0/+1
|\ \ | |/ |/|
| * ASoC: rt5645: set RT5645_PRIV_INDEX as volatileBard Liao2016-07-071-0/+1
| | | | | | | | | | | | | | | | RT5645_PRIV_INDEX(0x6a) indicate the address of PR- registers. So, it should be volatile. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
OpenPOWER on IntegriCloud