summaryrefslogtreecommitdiffstats
path: root/sound/pci
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Fix a regression of the position-buffer checkTakashi Iwai2011-09-301-4/+5
| | | | | | | | | | | | | | | The commit a810364a0424c297242c6c66071a42f7675a5568 ALSA: hda - Handle -1 as invalid position, too caused a regression on some machines that require the position-buffer instead of LPIB, e.g. resulting in noises with mic recording with PulseAudio. This patch fixes the detection by delaying the test at the timing as same as 3.0, i.e. doing the position check only when requested in azx_position_ok(). Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Don't detect LO jack when identical with HPTakashi Iwai2011-09-261-0/+4
| | | | | | | | | | | | | | | | The spec->autocfg.line_out_pins[] may contain the same pins as hp_pins[] depending on the configuration. When they are identical, detecting the line_jack_present flag screws up the auto-mute because alc_line_automute() is called unconditionally at initialization while it won't be triggered by unsol events, thus the old line_jack_present flag is kept for the whole run. For fixing this buggy behavior, the driver needs to check whether the line-outs are really individual, and skip if same as headphone jacks. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Avoid bogus HP-pin assignmentTakashi Iwai2011-09-261-1/+3
| | | | | | | | | | | When the headphone pin is assigned as primary output to line_out_pins[], the automatic HP-pin assignment by ASSID must be suppressed. Otherwise a wrong pin might be assigned to the headphone and breaks the auto-mute. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
* ALSA: HDA: No power nids on 92HD93David Henningsson2011-09-241-0/+1
| | | | | | | | | | This patch is necessary to make internal speakers work on this chip. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Tested-by: Alex Wolfson <alex.wolfson@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fm801: Gracefully handle failure of tuner auto-detectBen Hutchings2011-09-221-3/+10
| | | | | | | | | | | | | | | Commit 9676001559fce06e37c7dc230ab275f605556176 ("ALSA: fm801: add error handling if auto-detect fails") seems to break systems that were previously working without a tuner. As a bonus, this should fix init and cleanup for the case where the tuner is explicitly disabled. Reported-and-tested-by: Hor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fm801: Fix double free in case of error in tuner detectionBen Hutchings2011-09-221-2/+0
| | | | | | | | | | | | | | | | Commit 9676001559fce06e37c7dc230ab275f605556176 ("ALSA: fm801: add error handling if auto-detect fails") added incorrect error handling. Once we have successfully called snd_device_new(), the cleanup function fm801_free() will automatically be called by snd_card_free() and we must *not* also call fm801_free() directly. Reported-by: Hor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HDA: Add support for IDT 92HD93David Henningsson2011-09-201-0/+1
| | | | | | | Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Fix auto-mute with HP+LO configurationTakashi Iwai2011-09-191-4/+5
| | | | | | | | | | | | | | | | | | When the system has only the headphone and the line-out jacks without speakers, the current auto-mute code doesn't work. It's because the spec->automute_lines flag is wrongly referred in update_speakers(). This flag must be meaningless when spec->automute_hp_lo isn't set, thus they should be always coupled. The patch fixes the problem and add a comment to indicate the relationship briefly. BugLink: http://bugs.launchpad.net/bugs/851697 Reported-by: David Henningsson <david.henningsson@canonical.com> Tested-By: Jayne Han <jayne.han@canonical.com> Cc: stable@kernel.org (3.0) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HDA: Cirrus - fix "Surround Speaker" volume control nameDavid Henningsson2011-09-141-1/+1
| | | | | | | | | | This patch fixes "Surround Speaker Playback Volume" being cut off. (Commit b4dabfc452a10 was probably meant to fix this, but it fixed only the "Switch" name, not the "Volume" name.) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Terminate the recursive connection search properlyTakashi Iwai2011-09-131-1/+5
| | | | | | | | | The recursive search of widget connections in snd_hda_get_conn_index() must be terminated at the pin and the audio-out widgets. Otherwise you'll get "too deep connection" warnings unnecessarily. Reported-by: Francis Moreau <francis.moro@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Conexant: Allow different output types to share DACDavid Henningsson2011-08-251-19/+27
| | | | | | | | | | | | Headphones has stopped working for the original reported (a regression compared to 2.6.38). This is because Speaker and Headphones share the same DAC, in which case no Headphones volume control was created. This patch fixes so that both Speaker and Headphones volume controls are created in such scenario. BugLink: http://bugs.launchpad.net/bugs/817943 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/conexant - Enable ADC-switching for auto-mic mode, tooTakashi Iwai2011-08-241-1/+1
| | | | | | The ADC-switching can work also in the auto-mic mode, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix double-headphone/speaker paths for Cxt auto-parserTakashi Iwai2011-08-231-3/+10
| | | | | | | | | When multiple headphones or speakers are assigned but no individual DACs are available, the driver should take the first HP/SPK DAC instead of another primary output. The patch adds a bit-flag to dac field of struct pin_dac_pair indicating that it's a slave DAC. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Update jack-sense info even when no automute is setTakashi Iwai2011-08-231-4/+4
| | | | | | | | | The internal states, jack_present and line_jack_present should be updated upon unsolicited events even if no automute is set. Otherwise the wrong state is referred when the automute behavior is changed by the mixer control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix output-path initialization for Realtek auto-parserTakashi Iwai2011-08-231-7/+13
| | | | | | | | When the headphone or speaker output has no own DAC, initialize the path using the primary DAC. Otherwise the path won't be set properly and can result in the silence. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.cTakashi Iwai2011-08-201-3/+5
| | | | | | | | snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Don't spew too many ELD errorsTakashi Iwai2011-08-201-12/+19
| | | | | | | | | | | | | Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add "PCM" volume to vmaster slave listTakashi Iwai2011-08-181-0/+2
| | | | | | | | | The new parser may use "PCM" volume, but it was missing the vmaster slave list, thus "Master" volume didn't control it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=41342 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix duplicated capture-volume creation for ALC268 modelsTakashi Iwai2011-08-161-18/+18
| | | | | | | | Fix the duplicated creation of capture-mixer elements for some static ALC268 configurations. The capture mixers must be put to cap_mixer field instead of mixers array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelistDaniel T Chen2011-08-151-0/+1
| | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/826081 The original reporter needs 'Headphone Jack Sense' enabled to have audible audio, so add his PCI SSID to the whitelist. Reported-and-tested-by: Muhammad Khurram Khan Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328 - adjust error handling code to include debugging codeJulia Lawall2011-08-101-4/+7
| | | | | | | | snd_azf3328_dbgcallenter is called at the very beginning of the function, so it could be useful to call snd_azf3328_dbgcallleave at all exit points. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set()Wang Shaoyan2011-08-101-0/+2
| | | | | | | | | | | In commit 45eebda7, it add new function stac_vrefout_set, but it is only used in code between CONFIG_SND_HDA_POWER_SAVE macro, so add the macro to avoid such warning: sound/pci/hda/patch_sigmatel.c:676:12: warning: 'stac_vrefout_set' defined but not used Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/kconfig' into for-linusTakashi Iwai2011-08-0817-21/+21
|\
| * ALSA: Fix dependency of CONFIG_SND_TEA575XTakashi Iwai2011-08-071-5/+5
| | | | | | | | | | | | | | | | | | | | CONFIG_SND_TEA575X is enabled by RADIO_SF16FMR2, but the latter one is no PCI device. Since tea575x-tuner itself is independent from the board bus type, the config should be moved out of SND_PCI dependency. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * Merge branch 'for-linus' of ↵Linus Torvalds2011-08-023-12/+125
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: asihpi - Clarify adapter index validity check ALSA: asihpi - Don't leak firmware if mem alloc fails ALSA: rtctimer.c needs module.h ASoC: Fix txx9aclc.c build ALSA: hdspm - Add firmware revision 0xcc for RME MADI ALSA: hdspm - Fix reported external sample rate on RME MADI and MADIface ALSA: hdspm - Provide MADI speed mode selector on RME MADI and MADIface ALSA: sound/core/pcm_compat.c: adjust array index
| * \ Merge branch 'v4l_for_linus' of ↵Linus Torvalds2011-07-301-2/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
| | * | [media] radio-sf16fmr2: convert to generic TEA575x interfaceOndrej Zary2011-07-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert radio-sf16fmr2 to use generic TEA575x implementation. Most of the driver code goes away as SF16-FMR2 is basically just a TEA5757 tuner connected to ISA bus. The card can optionally be equipped with PT2254A volume control (equivalent of TC9154AP) - the volume setting is completely reworked (with balance control added) and tested. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2011-07-283-64/+177
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
| * \ \ \ Merge branch 'for-linus' of ↵Linus Torvalds2011-07-2711-153/+902
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (22 commits) ALSA: hda - Cirrus Logic CS421x support ALSA: Make pcm.h self-contained ALSA: hda - Allow codec-specific set_power_state ops ALSA: hda - Add post_suspend patch ops ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM ALSA: hda - Make sure mute led reflects master mute state ALSA: hda - Fix invalid mute led state on resume of IDT codecs ASoC: Revert "ASoC: SAMSUNG: Add I2S0 internal dma driver" ALSA: hda - Add support of the 4 internal speakers on certain HP laptops ALSA: Make snd_pcm_debug_name usable outside pcm_lib ALSA: hda - Fix DAC filling for multi-connection pins in Realtek parser ASoC: dapm - Add methods to retrieve snd_card and soc_card from dapm context. ASoC: SAMSUNG: Add I2S0 internal dma driver ASoC: SAMSUNG: Modify I2S driver to support idma ASoC: davinci: add missing break statement ASoC: davinci: fix codec start and stop functions ASoC: dapm - add DAPM macro for external enum widgets ASoC: Acknowledge WM8962 interrupts before acting on them ASoC: sgtl5000: guide user when regulator support is needed ASoC: sgtl5000: refactor registering internal ldo ...
| * | | | | atomic: use <linux/atomic.h>Arun Sharma2011-07-2615-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-07-251-1/+1
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
| | * \ \ \ \ Merge branch 'master' into for-nextJiri Kosina2011-07-1110-45/+112
| | |\ \ \ \ \ | | | | |_|/ / | | | |/| | | | | | | | | | | | | | | | | Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
| | * | | | | treewide: transciever/transceiver spelling fixesJoe Perches2011-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just tyops. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | | | ALSA: asihpi - use kzalloc()Thomas Meyer2011-08-071-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kzalloc rather than kmalloc followed by memset with 0 This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous The semantic patch that makes this output is available in scripts/coccinelle/api/alloc/kzalloc-simple.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | | ALSA: hda - Fix a complile warning in patch_via.cWang Shaoyan2011-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sound/pci/hda/patch_via.c:2087: warning: 'dac' may be used uninitialized in this function Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | | ALSA: hdspm - Fix uninitialized compile warningsTakashi Iwai2011-08-051-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Put the exception checks for io_type switch() for possible mistakes in future. Also this shuts up annoying compile warnings. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | | ALSA: hda - Use auto-parser for ASUS UX50, Eee PC P901, S101 and P1005Takashi Iwai2011-08-041-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It works fine with auto-parser and now the digital mic workaround was implemented in auto-parser fixup, let's drop the static model quirks for these models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | | ALSA: hda - Fix digital-mic mono recording on ASUS Eee PCTakashi Iwai2011-08-041-0/+26
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | ALSA: asihpi - Clarify adapter index validity checkEliot Blennerhassett2011-08-021-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoids assigning possibly invalid address to pa, even if it is never dereferenced. Correct error response to reflect request object/function ids. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | ALSA: asihpi - Don't leak firmware if mem alloc failsJesper Juhl2011-08-011-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We leak the memory allocated to 'firmware' when we fail to release_firmware() after a kmalloc() failure in hpi_dsp_code_open(). This patch should take care of the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | ALSA: hdspm - Add firmware revision 0xcc for RME MADIAdrian Knoth2011-07-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently, there are multiple old firmware revisions in the wild for the PCI RME MADI cards. Just add them to the list of supported devices and treat them like their modern counterparts. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | ALSA: hdspm - Fix reported external sample rate on RME MADI and MADIfaceAdrian Knoth2011-07-291-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In slave mode, the card can only detect the base frequency (32..48kHz) on the MADI link (exception: 96k frames), so the real external sample rate is this base frequency multiplied by 1, 2 or 4 depending on the speed mode. This patch enables 64..192kHz sample rates in clock slave mode, which failed before due to an alleged sample rate mismatch between the MADI link (e.g., 48kHz) and the application in DS/QS mode (e.g., 96kHz, 192kHz). Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | ALSA: hdspm - Provide MADI speed mode selector on RME MADI and MADIfaceAdrian Knoth2011-07-291-2/+89
| |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running in slave mode (no clock master), there is no way to determine the real wirespeed on the MADI link (single/double/quad speed). Like physical gear, simply provide the user with a tristate switch to select the appropriate format. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: hda - Fix duplicated DAC assignments for RealtekTakashi Iwai2011-07-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copying hp_pins and speaker_pins from line_out_pins may confuse the parser, and it can lead to duplicated initializations for the same pin with a wrong DAC assignment. The problem appears in 3.0 kernel code. Cc: <stable@kernel.org> (for 3.0) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: asihpi - off by one in asihpi_hpi_ioctl()Dan Carpenter2011-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "adapter" is used as an array index in the adapters[] array so the off by one would make us read past the end. 1c073b67979 "ALSA: asihpi - Remove spurious adapter index check" reverted Dan Rosenberg's check that would have prevented the overflow here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nidsTakashi Iwai2011-07-271-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somce quirk models don't set adc_nids but let the parser filling it. But the recent code has unnecessary NULL-checks of spec->input_mux, and it resulted in NULL dereferences. This patch fixes that regression. Reported-and-tested-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: asihpi - bug fix pa use before init.Eliot Blennerhassett2011-07-271-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes bug introduced by 1c073b67. Also declare pa local to block in which it is used. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | ALSA: hda - Add support for vref-out based mute LED control on IDT codecsVitaliy Kulikov2011-07-271-43/+156
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also registers all necessary callbacks to support mute LED only when such control is enabled. And it keeps codec AFG in D0 or D1 state all the time when aggressive power managemnt is enabled for vref-out control (and mute LED) work correctly. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Cirrus Logic CS421x supportTim Howe2011-07-261-34/+709
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This update includes the changes necessary for supporting the CS421x family of codecs. Previously this file only supported the CS420x family of codecs. This file also contains init verbs to correct several issues in the CS421x hardware. Behavior between the CS421x and CS420x codec families is similar, so several functions have been reused with "if" statements to determine which codec family (CS421x or CS420x) is present. Also, this file will be updated sometime in the near future in order to add support for a system using CS421x that requires mono mix on the speaker output only. [Fix const usages and adaption for new APIs by tiwai] Signed-off-by: Tim Howe <tim.howe@cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ALSA: hda - Allow codec-specific set_power_state opsTakashi Iwai2011-07-263-41/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The procedure for codec D-state change may have exceptional cases depending on the codec chip, such as a longer delay or suppressing D3. This patch adds a new codec ops, set_power_state() to override the system default function. For ease of porting, snd_hda_codec_set_power_to_all() helper function is extracted from the default set_power_state() function. As an example, the Conexant codec-specific delay is removed from the default routine but moved to patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud