summaryrefslogtreecommitdiffstats
path: root/sound/pci/hda
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda: Use LPIB for a Shuttle deviceDaniel T Chen2010-05-291-0/+1
| | | | | | | | | | | | | | | | | | | BugLink: https://launchpad.net/bugs/551949 Symptom: On the reporter's Shuttle device, using PulseAudio in Ubuntu 10.04 LTS results in "popping clicking" audio with the PA crashing shortly thereafter. Test case: Using Ubuntu 10.04 LTS (Linux 2.6.32.12), Linux 2.6.33, or Linux 2.6.34, adjust the HDA device's volume with PulseAudio. Resolution: add SSID for this machine to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: Christian Mehlis <mehlis@inf.fu-berlin.de> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codecAndreas Herrmann2010-05-281-0/+1
| | | | | | | | | | | On a Thinkpad Edge 13 "01972NG" I had the problem that speakers played sound although headphones were plugged in. Using model=ideapad with latest alsa-git kernel fixed this. So adding this quirk to use ideapad for another Thinkpad Edge variant seems sensible. Cc: Jerone Young <jerone.young@canonical.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use LPIB for Sony VPCS11V9EDaniel T Chen2010-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | BugLink: https://launchpad.net/bugs/586347 Symptom: On the Sony VPCS11V9E, using GStreamer-based applications with PulseAudio in Ubuntu 10.04 LTS results in stuttering audio. It appears to worsen with increased I/O. Test case: use Rhythmbox under increased I/O pressure. This symptom is reproducible in the current daily stable alsa-driver snapshots (at least up until 21 May 2010; later snapshots fail to build from source due to missing preprocessor directives when compiled against 2.6.32). Resolution: add SSID for this machine to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: Lauri Kainulainen <lauri@sokkelo.net> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add support for Thinkpad Edge conexant chipJerone Young2010-05-271-0/+1
| | | | | | | This quirks in support for the Thinkpad Edge. Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda_intel: fix handling of non-completion stream interruptsClemens Ladisch2010-05-251-1/+4
| | | | | | | | | | Check that the interrupt raised for a stream is actually a buffer completion interrupt before handling it as one. Otherwise, memory errors or FIFO xruns would be interpreted as a pointer update and could break the stream timing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Fix model quirk for Dell M1730Daniel T Chen2010-05-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://launchpad.net/bugs/576160 Symptom: Currently (2.6.32.12) the Dell M1730 uses the 3stack model quirk. Unfortunately this means that capture is not functional out- of-the-box despite ensuring that capture settings are unmuted and raised fully. Test case: boot from Ubuntu 10.04 LTS live cd; capture does not work. Resolution: Correct the model quirk for Dell M1730 to rely on the BIOS configuration. This patch also trivially sorts the quirk into the correct section based on the comments. Reported-and-Tested-By: <picdragon99@msn.com> Tested-By: Daren Hayward Tested-By: Tobias Krais Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - iMac9,1 sound fixesJustin P. Mattock2010-05-251-44/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First issue: With the original patch, I've noticed by unmuting the mic (and even having it muted), there is a distorted("Noise") coming from the internal speakers, even when the headphones are plugged in. What my finding's revealed is: /* Mic (rear) pin: input vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, From the original patch. Looking at codec#0 0x18/0x1a is listed as: Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x90100141: [Fixed] Speaker at Int N/A Conn = Unknown, Color = Unknown DefAssociation = 0x4, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x41: OUT VREF_50 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 seems this Node is listed as: [Fixed] Speaker while 0x15 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x018b3020: [Jack] Line In at Ext Rear Conn = Comb, Color = Blue DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x01: VREF_50 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 is [Jack] Line In at Ext Rear. (looking at the other apple products as examples I came up with the fix below). Second issue: alc885_mbp_4ch_modes The original patch does a good job with the HP pin automute function, but from what I noticed is I would have to manually change the channel form 2 to 4 after plugging the headphones in. And not to mention having odd moments to where I was jamming out with the headphones on, then later realized I had sound blasting out of the speakers as well. My findings revealed that changing alc885_mbp_4ch_modes to alc885_mba21_ch_modes and setting - spec->autocfg.speaker_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x18; gets the automute function when the headphones plugged in working flawlessly(and the no need to manually change the channel number afterwards). Third issue: alc885_imac91_mixer There probably doesnt need to be anything changed with this (esspecially if your one to like lots of sliders),but my findings revealed that mac osx only has a master on the top right, another switch on itunes, and then a slider for the mic. So the changes I did below try and mimic osx as much as possible (only thing I had an issue with is just having one mute switch on the master, instead of having two(still investigating)). fourth issue: alc882_capture_source I endeded up creating alc889A_imac91_capture_source() only because looking at alc882_capture_source I see that the mic is set to 0x1 while this works, I also noticed that adding 0x1 and 0x01 and testing that 0x1 somehow stops working, and 0x01 works(so I figured 0x01 was more of the alpha of the numbers(still need to figure out where that valuse is)). In any case the microphone does work with the original, and with the below patch, but both still record not as clean(lots of "Noise", which I would like to look into too). Note: using alsamixer -Va reveals the capture switches. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use LPIB for Toshiba A100-259Daniel T Chen2010-05-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://launchpad.net/bugs/549560 Symptom: on a significant number of hardware, booting from a live cd results in capture working correctly, but once the distribution is installed, booting from the install results in capture not working. Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly. Install to HD and reboot; capture does not work. Reproduced with 2.6.32 mainline build (vanilla kernel.org compile) Resolution: add SSID for Toshiba A100-259 to the position_fix quirk table, explicitly specifying the LPIB method. I'll be sending additional patches for these SSIDs as bug reports are confirmed. This patch also trivially sorts the quirk table in ascending order by subsystem vendor. Reported-and-Tested-by: <davide.molteni@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use LPIB for Acer Aspire 5110Daniel T Chen2010-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | BugLink: https://launchpad.net/bugs/583983 Symptom: on a significant number of hardware, booting from a live cd results in capture working correctly, but once the distribution is installed, booting from the install results in capture not working. Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly. Install to HD and reboot; capture does not work. Reproduced with 2.6.32 mainline build (vanilla kernel.org compile). Resolution: add SSID for Acer Aspire 5110 to the position_fix quirk table, explicitly specifying the LPIB method. I'll be sending additional patches for these SSIDs as bug reports are confirmed. Reported-and-Tested-By: Leo Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-05-209-137/+499
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits) ALSA: hda: Storage class should be before const qualifier ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT ASoC: sdp4430 - add sdp4430 pcm ops to DAI. ASoC: TWL6040: Enable earphone path in codec ASoC: SDP4430: Add support for Earphone speaker ASoC: SDP4430: Add sdp4430 machine driver ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function ALSA: sound/pci/asihpi: Use kzalloc ALSA: hdmi - dont fail on extra nodes ALSA: intelhdmi - add id for the CougarPoint chipset ALSA: intelhdmi - user friendly codec name ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS ALSA: asihpi: incorrect range check ALSA: asihpi: testing the wrong variable ALSA: es1688: add pedantic range checks ARM: McBSP: Add support for omap4 in McBSP driver ARM: McBSP: Fix request for irq in OMAP4 OMAP: McBSP: Add 32-bit mode support ...
| * Merge branch 'topic/hda' into for-linusTakashi Iwai2010-05-209-137/+499
| |\
| | * ALSA: hda: Storage class should be before const qualifierTobias Klauser2010-05-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: hdmi - dont fail on extra nodesWu Fengguang2010-05-171-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of HDMI nodes is expected to go up in future. So don't fail hard on seeing extra converter/pin nodes. We can still operate safely on the nodes within MAX_HDMI_CVTS/MAX_HDMI_PINS. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: intelhdmi - add id for the CougarPoint chipsetWu Fengguang2010-05-171-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add id for Intel CougarPoint HDMI audio codec. CougarPoint provides 3 Audio Converters. Increase MAX_HDMI_CVTS/MAX_HDMI_PINS accordingly. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: intelhdmi - user friendly codec nameWu Fengguang2010-05-171-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Use the full chipset codename as codec name. They are more user friendly than the spec abbrs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORSWu Fengguang2010-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is necessary to support >=3 HDMI playback devices starting from the CougarPoint codec. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * [ALSA] snd-hda-intel: Improve azx_position_ok()Jaroslav Kysela2010-05-111-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add back the zero return value (activate workqueue) when bdl_pos_adj is nonzero for position check. Do the position related check only for first next period using wallclk counter. Return -1 value (ignore interrupt) when period_bytes variable is zero. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | * [ALSA] snd-hda-intel: use WALLCLK register to check for early irqsJaroslav Kysela2010-05-111-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use 24Mhz WALLCLK register to ignore too early interrupts and wrong interrupt status. The bad timing confuses the higher ALSA layer and causes audio skipping. More information about behaviour and debugging can be found in kernel bz#15912. https://bugzilla.kernel.org/show_bug.cgi?id=15912 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | * ALSA: hda - Fixes distorted recording on US15W chipsetShahin Ghazinouri2010-05-111-14/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HDA controller in US15W (Poulsbo) reports inaccurate position values for capture streams when using the LPIB read method, resulting in distorted recordings. However, using the position buffer is broken for playback streams, resulting in a fallback to the LPIB method with the current driver. This patch works around the issue by independently detecting the read position method for capture and playback streams. The patch will not have any effect if the position fix method is explicitly set. [Code simplified by tiwai] Signed-off-by: Shahin Ghazinouri <shahin.ghazinouri@pelagicore.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-05-103-5/+3
| | |\
| | * | ALSA: hda: enable SPDIF output for Conexant 5051/Lenovo docking stationsPierre-Louis Bossart2010-05-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the SPDIF output pin by default. It also enables it for quirks related to Levono docking stations (x200 and 25041, identified with the same 17aa:20f2 ID). Even though not all Lenovo docking stations have SPDIF connectors, enabling the pin by default shouldn't be a problem for anyone. Other quirks remain unmodified. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | ALSA: hda - Remove superfluous external amp setup for ALC888Takashi Iwai2010-05-061-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had a fixed external amp setup enabled for ALC888, but this seems unnecessary. The amps are controlled rather by GPIOs. Let's remove it now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-05-066-13/+13
| | |\ \
| | * | | ALSA: hda - Add initial support for Thinkpad T410s HDA codecJens Taprogge2010-04-151-4/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | attached please find a patch that adds support for at least the T410s HDA codec. Most likely it will also add support for the T410 and T510 based models. The patch was derived from Ideapad support. Support for the laptop's and docking-station output connectors as well as the docking-station microphone connector and the laptops internal devices has been tested. Since it has been developed without a data-sheet available, support for digital outputs and the laptop's microphone input may well be incorrect. Microphone mute functionality is not included: The microphone mute button seems to be reported through thinkpad_acpi key 0000101b. The mute button LED seems to be wired to thinkpad_acpi led number 15. Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-04-152-0/+2
| | |\ \ \
| | * \ \ \ Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-04-142-25/+80
| | |\ \ \ \
| | * \ \ \ \ Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-04-091-8/+97
| | |\ \ \ \ \
| | * | | | | | ALSA: hda - Remove left-over debug printk in patch_realtek.cTakashi Iwai2010-04-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | ALSA: hda - Fix ALC882 DAC connections in auto modeTakashi Iwai2010-04-071-19/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assign DACs properly to each output. Currently, the front output is bound to HP/speaker outputs blindly, but they should be assigned to individual DACs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-04-072-6/+11
| | |\ \ \ \ \ \
| | * \ \ \ \ \ \ Merge branch 'topic/hda-alc-mute' into topic/hdaTakashi Iwai2010-04-013-12/+98
| | |\ \ \ \ \ \ \
| | | * | | | | | | ALSA: hda - introduce snd_hda_codec_update_cache()Takashi Iwai2010-03-303-14/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new helper, snd_hda_codec_update_cache(), for reducing the unneeded verbs. This function checks the cached value and skips if it's identical with the given one. Otherwise it works like snd_hda_codec_write_cache(). The alc269 code uses this function as an example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | | * | | | | | | ALSA: hda - Add mute LED support for HP laptop with ALC269Takashi Iwai2010-03-301-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some HP laptops have a mute LED that is controlled over the unused MIC2 VREF pin. Implement the LED updater like patch_sigmatel.c for this model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-04-011-0/+8
| | |\ \ \ \ \ \ \ \ | | | |/ / / / / / / | | |/| | | | | | |
| | * | | | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-03-301-15/+81
| | |\ \ \ \ \ \ \ \
| | * | | | | | | | | ALSA: hda - Report errors when invalid values are passed to snd_hda_amp_*()Takashi Iwai2010-03-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The values should be in 8 bits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-03-292-26/+27
| | |\ \ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ \ \ Merge remote branch 'alsa/devel' into topic/hdaTakashi Iwai2010-03-262-14/+31
| | |\ \ \ \ \ \ \ \ \ \
| | | * | | | | | | | | | ALSA: hda-intel - probe_only module option is int type nowJaroslav Kysela2010-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | | * | | | | | | | | | ALSA: hda-intel - remove model=hwio , use probe_only=3 insteadJaroslav Kysela2010-03-262-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe_only module parameter skips the codec initialization, too. Remove the model=hwio code and use second bit in probe_only to skip the HDA codec reset procedure. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | | * | | | | | | | | | ALSA: hda-intel - AD1984 thinkpad - add analog beep input controlJaroslav Kysela2010-03-261-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Lenovo Thinkpad T61/X61, the analog beep input is connected to node 0x20, index 3. Move the digital beep mute/volume controls as "Digital Beep" and create analog beep controls for mentioned node. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | | * | | | | | | | | | ALSA: hda-intel - add special 'hwio' model to bypass initializationJaroslav Kysela2010-03-262-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the 'model=hwio' option, the driver bypasses any codec initialization and the reset procedure for codecs is also bypassed. This mode is usefull to enable direct access using hwdep interface (using hdaverb or hda-analyzer tools) and retain codec setup from BIOS. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| | * | | | | | | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-03-253-9/+31
| | |\ \ \ \ \ \ \ \ \ \ \
| | * | | | | | | | | | | | ALSA: hda - Fix uninitialized variable warning in ↵Takashi Iwai2010-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alc_auto_parse_customize_define() Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-03-211-0/+2
| | |\ \ \ \ \ \ \ \ \ \ \ \
| | * | | | | | | | | | | | | ALSA: hda - Add alc_codec_rename() helperKailang Yang2010-03-191-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added alc_codec_rename() helper for renaming codec->chip_name. Added Acer-specific codec naming for ALC269/662. [Clean-up and refactoring by tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | | | | ALSA: hda - Add parse customize define function for Realtek codecsKailang Yang2010-03-191-16/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | | | | ALSA: hda - Take internal mic as Front MicKailang Yang2010-03-191-1/+2
| | | |_|/ / / / / / / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new check for MIC. Do the internal DMIC as the Front MIC. It could solve the default record source index issue. [Fix the check properly using the bitmask by tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | | | | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2010-05-201-1/+1
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ | |/ / / / / / / / / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
| * | | | | | | | | | | | | Merge branch 'master' into for-nextJiri Kosina2010-04-2310-88/+360
| |\ \ \ \ \ \ \ \ \ \ \ \ \
OpenPOWER on IntegriCloud