summaryrefslogtreecommitdiffstats
path: root/sound/isa/ad1848
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: wss: Remove (almost) always NULL parametersLars-Peter Clausen2015-01-021-4/+3
| | | | | | | | | | | | | | | | | | Most callers of snd_wss_pcm(), snd_wss_timer() and snd_cs4236_pcm() pass NULL as the last parameter, some callers pass a pointer but never use it after the function has been called and only a few callers pass a pointer and actually use it. The later is only the case for snd_wss_pcm() for snd_cs4236_pcm() and it is possible to get the same PCM object by accessing the pcm field of the snd_wss struct that was passed as the first parameter. This function removes the last parameters from the functions mentioned above and updates the callers which used it to use chip->pcm instead. This allows us to slightly simplify the functions since they don't have to check and set the last parameter anymore which makes the code slightly shorter and cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: isa: Convert to snd_card_new() with a device pointerTakashi Iwai2014-02-121-3/+1
| | | | | | Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ISA: Remove superfluous *_set_drvdata(NULL) callsTakashi Iwai2013-05-291-1/+0
| | | | | | | | Similarly like the previous commit for PCI drivers, remove dev_set_drvdata(NULL) and pnp_set_drvdata(NULL) calls in ISA drivers now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: isa: remove __dev* attributesBill Pemberton2012-12-071-4/+4
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: module_param: make bool parameters really boolRusty Russell2011-12-191-2/+2
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker2011-10-311-1/+1
| | | | | | | | | The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ALSA: Convert to snd_card_create() in sound/isa/*Takashi Iwai2009-01-121-3/+3
| | | | | | Convert from snd_card_new() to the new snd_card_create() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: remove direct access of dev->bus_id in sound/isa/*Takashi Iwai2008-11-031-3/+3
| | | | | | | Removed the direct accesses of dev->bus_id in sound/isa/* by replacement with dev_err() or dev_warn() functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: remove stale filesTakashi Iwai2008-09-091-0/+0
| | | | | | | | Empty files remained likely due to wrong patching. Remove them now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss detection code instead of ad1848 oneKrzysztof Helt2008-08-063-492/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the wss detection code and kill the ad1848 library. The library is fully assimilated into the new wss library. This required reworking of the AD1848 family code so the code is changed to correctly detect chips from the AD1848 and CS4231 families. I have tested it on following cards: Gallant SC-6600 (codec: AD1848, driver: snd-sc6600) SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape) SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy) Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236) Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330) Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232) Sound playback and recording works on all these cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss pcm code instead of ad1848 oneKrzysztof Helt2008-08-062-535/+11
| | | | | | | | | | | | | Use the wss pcm code and kill the ad1848 pcm code. The AD1848 chip is much slower than CS4231 chips so the waiting loop was increased 100x (10x is not enough). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss mixer code instead of ad1848 oneKrzysztof Helt2008-08-062-262/+1
| | | | | | | | | Use the wss mixer code and kill the ad1848 mixer code. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)Krzysztof Helt2008-08-061-49/+55
| | | | | | | | | Use CS4231P instead of AD1848P (kill the AD1848P). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: replace ad1848 mixer element macros with wss onesKrzysztof Helt2008-08-061-72/+51
| | | | | | | | | Use the wss macros instead of ad1848 ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss constants instead of ad1848 onesKrzysztof Helt2008-08-062-19/+31
| | | | | | | | | | | | | | Use wss constants for mode. Move ad1848 hardware constants to the wss.h. Move mixer tlv macros into the ad1848_lib.c from the ad1848.h. Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem to be needed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use struct snd_wss instead of snd_ad1848Krzysztof Helt2008-08-062-63/+71
| | | | | | | | | | The snd_wss is superset of the snd_ad1848 so kill the latter and replace it with the snd_wss. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-312-2/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] ad1848 - Fix print formatTakashi Iwai2008-01-311-1/+1
| | | | | | | | Fixed the print format for debug message. Spotted by Matthew Wilcox. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] This patch removes open_mutex from the ad1848-lib asKrzysztof Helt2007-10-161-11/+3
| | | | | | | | | open and close operations are called only from pcm layer and mutexed there with pcm->open_mutex. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela2007-10-163-6/+6
| | | | Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] ad1848: simplify MCE down codeTrent Piepho2007-10-161-36/+21
| | | | | | | | | | | | | | | | The polling loop to check for ACI to go down was more convoluted than it needed to be. New loop should be more efficient and it is a lot simpler. The old loop checked for a timeout before checking for ACI down, which could result in an erroneous timeout. It's only a failure if the timeout expires _and_ ACI is still high. There is nothing wrong with the timeout expiring while the task is sleeping if ACI went low. A polling loop to check for the device to leaving INIT mode is removed. The device must have already left init for the previous ACI loop to have finished. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848: Fix msleep while atomicTrent Piepho2007-10-161-0/+2
| | | | | | | | | Simplest fix. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848_lib: waiting loops done after cs4231_libKrzysztof Helt2007-10-161-7/+7
| | | | | | | | | This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}Rene Herman2007-10-161-13/+13
| | | | | | | | | While I'm at it another 'while I'm there' -- replace commented out debug code with snd-printd{,d}. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848: replace HZ calculus with msecs_to_jiffies()Rene Herman2007-10-161-2/+2
| | | | | | | | | If I'm not mistaken, any (new) use of HZ these days is considered a bug so while I'm there... Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1838/cs4231 - fix MCE timeout upon initial loadRene Herman2007-10-161-8/+7
| | | | | | | | | | | | | | | | | | When the ad1848/cs2431 is first being initialized, auto-calibration may not be set causing a timeout waiting for it in snd_ad1848/cs4231_mce_down(). This has no dire consequences other than an alarming printk, but since what we need to wait for is for the calibration to _finish_, let's just check for that instead. The early chips need a slight delay (as commented -- 5 sample periods) to be sure that _if_ calibration is going to happen, it has started when we check While the CS4231A datasheet implies it'll happen immediately on downing MCE, some testing is showing that there's a window there as well, so just do the delay everywhere. Thanks to Krysztof Helt for pinpointing this problem. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848_lib: replace common delay loop by functionKrzysztof Helt2007-10-161-22/+24
| | | | | | | | | | This patch replaces a common delay loop by a function. It also uses ARRAY_SIZE macro for the rates table. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] isa libs Makefiles cleanupKrzysztof Helt2007-10-161-5/+2
| | | | | | | | | | This patch uses the Kconfig parameters SND_AD1848_LIB and SND_CS4231_LIB instead of mentioning each driver that requires the ad1848-lib or cs4231-lib separately in the Makefiles. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix invalid schedule_timeout_interruptible()Takashi Iwai2007-07-201-2/+2
| | | | | | | | | Fixed the invalid use of schedule_timeout_interruptible() without checking pending signals. Simply replaced with schedule_timeout(). Suggestions thanks to Jeff Garzik. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] isa_bus: ad1848Rene Herman2007-05-111-100/+67
| | | | | | | | ad1848: port to isa_bus infrastructure Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix __devinit and __devexit issues with sound driversPrarit Bhargava2007-02-141-1/+1
| | | | | | | | | | | | Fix __devinit and __devexit issues with sound drivers. Resolves MODPOST warnings similar to: WARNING: sound/drivers/snd-dummy.o - Section mismatch: reference to .init.text:snd_dummy_probe from .data.rel.local between 'snd_dummy_driver' (at offset 0x0) and 'snd_dummy_controls' WARNING: sound/drivers/snd-mtpav.o - Section mismatch: reference to .init.text:snd_mtpav_probe from .data.rel.local between 'snd_mtpav_driver' (at offset 0x0) and 'snd_mtpav_input' WARNING: sound/drivers/snd-virmidi.o - Section mismatch: reference to .init.text:snd_virmidi_probe from .data.rel.local after 'snd_virmidi_driver' (at offset 0x0) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add even more 'const' to everything related to TLVTakashi Iwai2007-02-091-3/+3
| | | | | | | | Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [ALSA] Add dB scale information to ad1848 driverTakashi Iwai2006-09-231-15/+34
| | | | | | | Added the dB scale information to ad1848 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] unregister platform device again if probe was unsuccessfulRene Herman2006-04-121-0/+4
| | | | | | | | | Unregister the platform device again if the probe was unsuccessful. This restores the behaviour of not loading the driver on probe() failure. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] continue on IS_ERR from platform device registrationRene Herman2006-04-121-10/+4
| | | | | | | | | | Continue with the next one on error from device registration. This would seem the correct thing to do, even if it's not the probe() error that we're getting. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ad1848 double freeDave Jones2006-03-221-3/+1
| | | | | | | | | | | Modules: AD1848 driver Same again, snd_ctl_add() already kfree's on error. Coverity #956 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix check of enable module optionTakashi Iwai2006-03-221-1/+3
| | | | | | | Fix the check of enable module option in probe of platform_device drivers. It shouldn't break the loop but just ignore if enable[i] is false. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] semaphore -> mutex (ISA part)Ingo Molnar2006-03-221-7/+7
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] unregister platform devicesClemens Ladisch2006-01-031-2/+14
| | | | | | | Call platform_device_unregister() for all platform devices that we've registered. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] ad1848 - Fix compilation without CONFIG_PMTakashi Iwai2006-01-031-0/+2
| | | | | | | | Modules: AD1848 driver Fix compilation without CONFIG_PM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ad1848 - Use platform_device, add PMTakashi Iwai2006-01-031-16/+73
| | | | | | | | | Modules: AD1848 driver Rewrite the probe/remove with platform_device. Add the PM support, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ad1848 - Add PM supportTakashi Iwai2006-01-031-13/+15
| | | | | | | | Modules: AD1848 driver Add PM support to ad1848 support code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove xxx_t typedefs: ISA AD1848Takashi Iwai2006-01-032-92/+92
| | | | | | | | Modules: AD1848 driver Remove xxx_t typedefs from the ISA AD1848 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove superfluous pcm_free callbacksTakashi Iwai2006-01-031-8/+0
| | | | | | Remove superflous pcm_free callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix schedule_timeout usageNishanth Aravamudan2005-11-041-4/+2
| | | | | | | | | | | Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded division to avoid rounding issues. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add missing KERN_* suffix to printkTakashi Iwai2005-11-041-8/+8
| | | | | | Add missing KERN_* suffix to printk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove vmalloc wrapper, kfree_nocheck()Takashi Iwai2005-11-041-4/+1
| | | | | | | | - Remove vmalloc wrapper - Add release_and_free_resource() to remove kfree_nocheck() from each driver and simplify the code Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Replace with kzalloc() - isa stuffTakashi Iwai2005-09-121-1/+1
| | | | | | | | | ES18xx driver,OPL3SA2 driver,AD1816A driver,AD1848 driver,CS4231 driver ES1688 driver,GUS Library,Opti9xx drivers,EMU8000 driver SB16/AWE driver,SB drivers Replace kcalloc(1,..) with kzalloc(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud