summaryrefslogtreecommitdiffstats
path: root/sound/drivers/mpu401
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: module_param: make bool parameters really boolRusty Russell2011-12-191-3/+3
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: Add module.h to the previously silent sound usersPaul Gortmaker2011-10-311-0/+1
| | | | | | | | Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker2011-10-311-1/+1
| | | | | | | | | The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* sound: irq: Remove IRQF_DISABLEDYong Zhang2011-09-221-1/+1
| | | | | | | | | | | | | | | Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: mpu401: clean up interrupt specificationClemens Ladisch2011-09-142-12/+11
| | | | | | | | | | | | | | | | | | | | | | | The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Convert to snd_card_create() in other sound/*Takashi Iwai2009-01-121-3/+3
| | | | | | | Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add MPU401_INFO_NO_ACK bitflagTakashi Iwai2008-04-291-1/+1
| | | | | | | | Added MPU401_INFO_NO_ACK bitflag to ignore the ACK check for UART commands. VT172x doesn't handle ACK commands, for example. Tested-by: Pavel Hofman <pavel.hofman@insite.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Define MPU401 registers in sound/mpu401_uart.hTakashi Iwai2008-04-241-6/+4
| | | | | | | Define some MPU401 registers in sound/mpu401_uart.h so that other drivers can refer to them. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] mpu401: reduce tx loop timeoutClemens Ladisch2008-04-241-6/+7
| | | | | | | | Reduce the number of times to check for a non-empty Tx FIFO from 100 to 2 because there is no MPU-401 implementation that needs more than one or two reads to determine the actual FIFO status. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-312-2/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] mpu401: fix recursive locking in timerClemens Ladisch2007-11-191-4/+8
| | | | | | | | | When the output and input ports are used at the same time, the timer can be interrupted by the hardware interrupt, so we have to disable interrupts when we take a lock in the timer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela2007-10-163-5/+5
| | | | Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] mpu-401: remove MPU401_INFO_UART_ONLY flagClemens Ladisch2007-10-162-4/+5
| | | | | | | | | | Since the last patch made the ENTER_UART command optional, the enter_uart option and its corresponding flag have become superfluous. The uart_enter option remains for backward compatibility but just prints a warning when used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] mpu-401: do not require an ACK byte for the ENTER_UART commandClemens Ladisch2007-10-161-1/+1
| | | | | | | | | | | | The original MPU-401 does not send an ACK byte after processing the ENTER_UART command, so we better do not try to wait for it. Many clones get this wrong and do send an ACK, but when interpreting it as MIDI, it is just a harmless Active Sensing message, and it is likely to be read and discarded by the interrupt handler before the MIDI input device is triggered. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] more section mismatchesRandy Dunlap2007-07-201-1/+1
| | | | | | | | | | | | | Something about __init_or_module isn't working as expected (?). CONFIG_HOTPLUG=y CONFIG_MODULES=n Fix shared init/exit code helper: WARNING: sound/built-in.o(.exit.text+0x243): Section mismatch: reference to .init.text: (between 'alsa_card_mpu401_exit' and 'ac97_bus_exit') WARNING: sound/built-in.o(.exit.text+0x21b): Section mismatch: reference to .init.text: (between 'alsa_card_dummy_exit' and 'alsa_card_serial_exit') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] mpu401 - Add MPU401_INFO_UART_ONLY bitflagTakashi Iwai2007-05-112-10/+20
| | | | | | | | | | | Added MPU401_INFO_UART_ONLY bitflag to avoid issueing UART_ENTER command at opening streams. Some devices support only UART mode and give errors to UART_ENTER. A new module option, uart_enter, is added to snd-mpu401 driver. For UART-only devices, set uart_enter=0. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [ALSA] Deprecate snd_card_free_in_thread()Takashi Iwai2006-09-231-1/+1
| | | | | | | | Deprecated snd_card_free_in_thread(), replaced with snd_card_free_when_closed(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 64bit resource: fix up printks for resources in sound driversGreg Kroah-Hartman2006-06-271-2/+3
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] Change an arugment of snd_mpu401_uart_new() to bit flagsTakashi Iwai2006-06-221-28/+68
| | | | | | | | | | Change the 5th argument of snd_mpu401_uart_new() to bit flags instead of a boolean. The argument takes bits that consist of MPU401_INFO_XXX flags. The callers that used the value 1 there are replaced with MPU401_INFO_INTEGRATED. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] mpu401_uart - Fix coding style and code clean upTakashi Iwai2006-06-221-42/+66
| | | | | | | | | - fold lines and fix spaces to follow the standard style - added some comments - moved EXPORT_SYMBOL() near the definition - some code clean up Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] unregister platform device again if probe was unsuccessfulRene Herman2006-06-221-0/+4
| | | | | | | | | This second one unregisters the platform device again when the probe is unsuccesful for sound/drivers, sound/arm/sa11xx-uda1341.c and sound/ppc/powermac.c. This gets them all. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] mpu401 section fixAndrew Morton2006-05-211-1/+1
| | | | | | | | | WARNING: sound/drivers/mpu401/snd-mpu401.o - Section mismatch: reference to .init.text: from .text between 'snd_mpu401_pnp_probe' (at offset 0x1f7) and 'snd_mpu401_pnp_remove' Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] continue on IS_ERR from platform device registrationRene Herman2006-04-271-10/+4
| | | | | | | | | | | | I previously only concerned myself with sound/isa. When I now checked for more platform_device_register_simple() usages in ALSA I found a couple more drivers that needed the same patches as already submitted for all the ISA drivers. This first one is the continue-on-iserr patch for sound/drivers. This gets them all. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] sound: fix hang in mpu401_uart.cJon Masters2006-04-201-9/+33
| | | | | | | | | | | | | | | | | | | | | This fixes a hang in mpu401_uart.c that can occur when the mpu401 interface is non-existent or otherwise doesn't respond to commands but we issue IO anyway. snd_mpu401_uart_cmd now returns an error code that is passed up the stack so that an open() will fail immediately in such cases. Eventually discovered after wine/cxoffice would constantly cause hard lockups on my desktop immediately after loading (emulating Windows too well). Turned out that I'd recently moved my sound cards around and using /dev/sequencer now talks to a sound card with a broken MPU. This second version changes -EFAULT to -EIO and frees open resources on error too. Test booted and seems to work ok. Signed-off-by: Jon Masters <jcm@jonmasters.org> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pnp: mpu401: adjust pnp_register_driver signatureBjorn Helgaas2006-03-271-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | This series of patches removes the assumption that pnp_register_driver() returns the number of devices claimed. Returning the count is unreliable because devices may be hot-plugged in the future. (Many devices don't support hot-plug, of course, but PNP in general does.) This changes the convention to "zero for success, or a negative error value," which matches pci_register_driver(), acpi_bus_register_driver(), and platform_driver_register(). If drivers need to know the number of devices, they can count calls to their .probe() methods. This patch: Remove the assumption that pnp_register_driver() returns the number of devices claimed. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] Fix check of enable module optionTakashi Iwai2006-03-221-1/+3
| | | | | | | Fix the check of enable module option in probe of platform_device drivers. It shouldn't break the loop but just ignore if enable[i] is false. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] unregister platform devicesClemens Ladisch2006-01-031-6/+15
| | | | | | | Call platform_device_unregister() for all platform devices that we've registered. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Fix possible races in timer callbacksTakashi Iwai2006-01-031-2/+3
| | | | | | Fix possible races in timer callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add error messagesTakashi Iwai2006-01-031-0/+1
| | | | | | Add error messages in the critial error path to be more verbose. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] mpu401 - Use platform_deviceTakashi Iwai2006-01-031-24/+63
| | | | | | | | Modules: MPU401 UART Rewrite the probe/remove code using platform_device. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove xxx_t typedefs: MPU401Takashi Iwai2006-01-032-41/+41
| | | | | | | | Modules: MPU401 UART Remove xxx_t typedefs from the MPU401-UART and MPU401 drivers Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove vmalloc wrapper, kfree_nocheck()Takashi Iwai2005-11-041-4/+1
| | | | | | | | - Remove vmalloc wrapper - Add release_and_free_resource() to remove kfree_nocheck() from each driver and simplify the code Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Replace with kzalloc() - othersTakashi Iwai2005-09-121-1/+1
| | | | | | | | | | | Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3 OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth USB generic driver,USB USX2Y Replace kcalloc(1,..) with kzalloc(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add snd_card_set_generic_dev() callTakashi Iwai2005-09-121-10/+16
| | | | | | | | | | | ARM,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,MIPS MIPS AU1x00 driver,PPC,PPC PowerMac driver,SPARC,SPARC AMD7930 driver SPARC cs4231 driver,SPARC DBRI driver - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-163-0/+782
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud