summaryrefslogtreecommitdiffstats
path: root/scripts/mod/file2alias.c
Commit message (Collapse)AuthorAgeFilesLines
* staging: fsl-mc: add support for device table matchingStuart Yoder2016-06-261-0/+12
| | | | | | | | | | Move the definition of fsl_mc_device_id to its proper location in mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c and file2alias.c to enable device table matching. With this patch udev based module loading of fsl-mc drivers is supported. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* of: fix autoloading due to broken modalias with no 'compatible'Wolfram Sang2016-06-081-1/+1
| | | | | | | | | | | | | | | | Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Mathieu Malaterre <malat@debian.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Andreas Schwab <schwab@linux-m68k.org> Fixes: 6543becf26fff6 ("mod/file2alias: make modalias generation safe for cross compiling") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* modpost: fix module autoloading for OF devices with generic compatible propertyPhilipp Zabel2016-05-051-24/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the wildcard at the end of OF module aliases is gone, autoloading of modules that don't match a device's last (most generic) compatible value fails. For example the CODA960 VPU on i.MX6Q has the SoC specific compatible "fsl,imx6q-vpu" and the generic compatible "cnm,coda960". Since the driver currently only works with knowledge about the SoC specific integration, it doesn't list "cnm,cod960" in the module device table. This results in the device compatible "of:NvpuT<NULL>Cfsl,imx6q-vpuCcnm,coda960" not matching the module alias "of:N*T*Cfsl,imx6q-vpu" anymore, whereas before commit 2f632369ab79 ("modpost: don't add a trailing wildcard for OF module aliases") it matched the module alias "of:N*T*Cfsl,imx6q-vpu*". This patch adds two module aliases for each compatible, one without the wildcard and one with "C*" appended. $ modinfo coda | grep imx6q alias: of:N*T*Cfsl,imx6q-vpuC* alias: of:N*T*Cfsl,imx6q-vpu Fixes: 2f632369ab79 ("modpost: don't add a trailing wildcard for OF module aliases") Link: http://lkml.kernel.org/r/1462203339-15340-1-git-send-email-p.zabel@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* modpost: don't add a trailing wildcard for OF module aliasesJavier Martinez Canillas2016-01-141-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ac551828993e ("modpost: i2c aliases need no trailing wildcard") removed the wildcard at the end of the I2C module aliases because I2C devices have no IDs so the aliases are just arbitrary device names. This is also true for OF modaliases since a compatible string is used to define a specific IP hardware block. So the modalias should match a specific compatible string and not attempt to match a compatible string whose name matches the beginning of another one. For example, the following driver module: $ modinfo cros_ec_keyb | grep alias alias: platform:cros-ec-keyb alias: of:N*T*Cgoogle,cros-ec-keyb* will be tried to be loaded for an alias of:N*T*Cgoogle,cros-ec-keyb-v2 but there could be a different driver that supports the device for that compatible string so it's better to remove the trailing wildcard for OF. Also, remove the word "always" from the add_wildcard() function comment since that was carried from the time where a wildcard was always added at the end of the module alias for all the devices. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Suggested-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Drivers: hv: vmbus: Use uuid_le type consistentlyK. Y. Srinivasan2015-12-141-1/+1
| | | | | | | Consistently use uuid_le type in the Hyper-V driver code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'sound-4.4-rc1' of ↵Linus Torvalds2015-11-061-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Here is the first batch of updates for sound system on 4.4-rc1. Again at this time, the update looks fairly calm; no big changes in either ALSA core or ASoC infrastructures, rather all small cleanups, in addition to the new stuff as usual. The biggest changes are about Firewire sound devices. It gained lots of new device support, and MIDI functionality. Also there are updates for a few still working-in-progress stuff (topology API and ASoC skylake), too. But overall, this update should give no big surprise. Some highlights are below: Core: - A few more Kconfig items for tinification; it's marked as EXPERT, so normal user should't be bothered :) - Refactoring with a new PCM hw_constraint helper - Removal of unused transfer_ack_{begin,end} PCM callbacks Firewire: - Restructuring of code subtree, lots of refactoring - Support AMDTP variants - New driver for Digidesign 002/003 family - Adds support for TASCAM FireOne to ALSA OXFW driver - Add MIDI support to TASCAM and Digi00x devices HD-Audio: - Automated modalias generation for codec drivers, finally - Improvement on heuristics for setting mixer name - A few fixes for longstanding bugs on Creative CA0132 cards - Addition of audio rate callback with i915 communication - Fix suspend issue on recent Dell XPS - Intel Lewisburg controller support ASoC: - Updates to the topology userspace interface - Big updates to the Renesas support (rcar) - More updates for supporting Intel Sky Lake systems - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10, Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825, Rockchip S/PDIF, and Atmel class D amplifier USB-Audio: - A fix for newer Roland MIDI devices - Quirks and workarounds for Zoom R16/24 device Misc: - A few fixes for some old Cirrus CS46xx PCI sound boards - Yet another fixes for some old ESS Maestro3 PCI sound boards" * tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (330 commits) ALSA: hda - Add Intel Lewisburg device IDs Audio ALSA: hda - Apply pin fixup for HP ProBook 6550b ALSA: hda - Fix lost 4k BDL boundary workaround ALSA: maestro3: Fix Allegro mute until master volume/mute is touched ALSA: maestro3: Enable docking support for Dell Latitude C810 ALSA: firewire-digi00x: add another rawmidi character device for MIDI control ports ALSA: firewire-digi00x: add MIDI operations for MIDI control port ALSA: firewire-digi00x: rename identifiers of MIDI operation for physical ports ALSA: cs46xx: Fix suspend for all channels ALSA: cs46xx: Fix Duplicate front for CS4294 and CS4298 codecs ALSA: DocBook: Add soc-ops.c and soc-compress.c ALSA: hda - Add / fix kernel doc comments ALSA: Constify ratden/ratnum constraints ALSA: hda - Disable 64bit address for Creative HDA controllers ALSA: hda/realtek - Dell XPS one ALC3260 speaker no sound after resume back ALSA: hda/ca0132 - Convert leftover pr_info() and pr_err() ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEP ASoC: rt5645: Sort the order for register bit defines ASoC: dwc: add check for master/slave format ASoC: rt5645: Add the HWEQ for the speaker output ...
| * ALSA: hda - Add hduadio support to DEVTABLESubhransu S. Prusty2015-10-201-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For generating modalias entries automatically, move the definition of struct hda_device_id to linux/mod_devicetable.h and add the handling of this record in file2alias helper. The new modalias is represented with combination of vendor id, device id, and api version as "hdaudio:vNrNaN". This patch itself doesn't convert the existing modaliases. Since they were added manually, this patch won't give any regression by itself at this point. [Modified the modalias format to adapt the api_version field, and drop invalid ANY_ID definition by tiwai] Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | mei: bus: add client protocol version to the device aliasTomas Winkler2015-09-201-1/+3
| | | | | | | | | | | | | | | | | | The device alias now looks like mei:S:uuid:N:* In that way we can bind different drivers to clients with different protocol versions if required. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | mei: make modules.alias UUID information easier to readPrarit Bhargava2015-09-201-3/+5
|/ | | | | | | | | | | scripts/mod/file2alias.c:add_uuid() convert UUID into a single string which does not conform to the standard little endian UUID formatting. This patch changes add_uuid() to output same format as %pUL and modifies the mei driver to match the change. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / scan: Add support for ACPI _CLS device matchingSuthikulpanit, Suravee2015-07-071-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds2015-06-261-0/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
| * usb: add bus type for USB ULPIHeikki Krogerus2015-05-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | mei: fix up uuid matchingGreg Kroah-Hartman2015-05-311-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | A previous commit, c93b76b34b4d ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b34b4d Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | mei: bus: report also uuid in module aliasTomas Winkler2015-05-241-2/+16
|/ | | | | | | | | | | | | In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* MIPS: Add CDMM bus supportJames Hogan2015-03-311-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* kbuild: trivial - use tabs for code indent where possibleMasahiro Yamada2014-06-101-22/+20
| | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2014-04-061-5/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
| * module: allow multiple calls to MODULE_DEVICE_TABLE() per moduleTom Gundersen2014-03-131-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78551277e4df5: "Input: i8042 - add PNP modaliases" had a bug, where the second call to MODULE_DEVICE_TABLE() overrode the first resulting in not all the modaliases being exposed. This fixes the problem by including the name of the device_id table in the __mod_*_device_table alias, allowing us to export several device_id tables per module. Suggested-by: Kay Sievers <kay@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | x86: align x86 arch with generic CPU modalias handlingArd Biesheuvel2014-02-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The x86 CPU feature modalias handling existed before it was reimplemented generically. This patch aligns the x86 handling so that it (a) reuses some more code that is now generic; (b) uses the generic format for the modalias module metadata entry, i.e., it now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of the 'x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:,XXXX,YYYY' that was used before. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | cpu: add generic support for CPU feature based module autoloadingArd Biesheuvel2014-02-181-0/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for advertising optional CPU features over udev using the modalias, and for declaring compatibility with/dependency upon such a feature in a module. The mapping between feature numbers and actual features should be provided by the architecture in a file called <asm/cpufeature.h> which exports the following functions/macros: - cpu_feature(FEAT), a preprocessor macro that maps token FEAT to a numeric index; - bool cpu_have_feature(n), returning whether this CPU has support for feature #n; - MAX_CPU_FEATURES, an upper bound for 'n' in the previous function. The feature can then be enabled by setting CONFIG_GENERIC_CPU_AUTOPROBE for the architecture. For instance, a module that registers its module init function using module_cpu_feature_match(FEAT_X, module_init_function) will be probed automatically when the CPU's support for the 'FEAT_X' feature is advertised over udev, and will only allow the module to be loaded by hand if the 'FEAT_X' feature is supported. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Modpost: fixed USB alias generation for ranges including 0x9 and 0xAJan Moskyto Matejka2014-02-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Commit afe2dab4f6 ("USB: add hex/bcd detection to usb modalias generation") changed the routine that generates alias ranges. Before that change, only digits 0-9 were supported; the commit tried to fix the case when the range includes higher values than 0x9. Unfortunately, the commit didn't fix the case when the range includes both 0x9 and 0xA, meaning that the final range must look like [x-9A-y] where x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced. Modprobe doesn't complain as it sees no difference between no-match and bad-pattern results of fnmatch(). Fixing this simple bug to fix the aliases. Also changing the hardcoded beginning of the range to uppercase as all the other letters are also uppercase in the device version numbers. Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK. Signed-off-by: Jan Moskyto Matejka <mq@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'kbuild' of ↵Linus Torvalds2013-07-101-4/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - fix for make headers_install argv explosion with too long path - scripts/setlocalversion does not call git update-index needlessly - fix for the src.rpm produced by make rpm-pkg. The new make image_name can be useful also for other packaging tools. - scripts/mod/devicetable-offsets.o is not rebuilt during each make run - make modules_install dependency fix - scripts/sortextable portability fix - fix for kbuild to generate the output directory for all object files in subdirs. - a couple of minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: create directory for dir/file.o tools/include: use stdint types for user-space byteshift headers Makefile: Fix install error with make -j option Fix a build warning in scripts/mod/file2alias.c improve modalias building scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/ kbuild: fix error when building from src rpm scripts/setlocalversion on write-protected source tree Makefile.lib: align DTB quiet_cmd kbuild: fix make headers_install when path is too long
| * Fix a build warning in scripts/mod/file2alias.cDaniel Tang2013-07-031-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some systems, __used is already defined in sys/cdefs.h and causes a build warning: scripts/mod/file2alias.c:85:1: warning: "__used" redefined In file included from /usr/include/stdio.h:64, from scripts/mod/modpost.h:1, from scripts/mod/file2alias.c:13: /usr/include/sys/cdefs.h:146:1: warning: this is the location of the previous definition This adds an extra check before defining the __used macro to see if the macro was already defined elsewhere. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | rapidio: add udev notificationAlexandre Bounine2013-07-031-0/+20
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add RapidIO-specific modalias generation to enable udev notifications about RapidIO-specific events. The RapidIO modalias string format is shown below: "rapidio:vNNNNdNNNNavNNNNadNNNN" Where: v - Device Vendor ID (16 bit), d - Device ID (16 bit), av - Assembly Vendor ID (16 bit), ad - Assembly ID (16 bit), as they are reported in corresponding Capability Registers (CARs) of each RapidIO device. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mei: bus: Initial MEI Client bus type implementationSamuel Ortiz2013-03-291-0/+12
| | | | | | | | | | | | | | | mei client bus will present some of the mei clients as devices for other standard subsystems Implement the probe, remove, match, device addtion routines, along with the sysfs and uevent ones. mei_cl_device_id is also added to mod_devicetable.h A mei-cleint-bus.txt document describing the rationale and the API usage is also added while ABI/testing/sysfs-bus-mei describeis the modalias ABI. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mod/file2alias: make modalias generation safe for cross compilingAndreas Schwab2013-01-241-308/+366
| | | | | | | | | | | Use the target compiler to compute the offsets for the fields of the device_id structures, so that it won't be broken by different alignments between the host and target ABIs. This also fixes missing endian corrections for some modaliases. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
* staging/ipack: Fix bug introduced by IPack device matchingJens Taprogge2012-09-071-1/+1
| | | | | | | | | | | ~0 can not be casted to u8. Instead of using the IPACK_ANY_ID for the format field we introduce a new IPACK_ANY_FORMAT specifically for that field and defined as 0xff. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Staging: ipack: implement ipack device table.Jens Taprogge2012-09-041-0/+15
| | | | | | | | | | | | | | | | | | The modaliases look like ipack:fXvNdM, where X is the format version (8 bit) and N and M are the vendor and device ID represented as 32 bit hexadecimal numbers each. Using 32 bits allows us to define IPACK_ANY_ID as (~0) without interfering with the valid ids. The resulting modalias string for ipoctal.ko looks like this (once ipoctal provides a device table): alias: ipack:f01v000000F0d00000048* alias: ipack:f01v000000F0d0000002A* alias: ipack:f01v000000F0d00000022* (output from modinfo) Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: allow match on bInterfaceNumberBjørn Mork2012-06-131-1/+4
| | | | | | | | | | | | | | | | | Some composite USB devices provide multiple interfaces with different functions, all using "vendor-specific" for class/subclass/protocol. Another OS use interface numbers to match the driver and interface. It seems these devices are designed with that in mind - using static interface numbers for the different functions. This adds support for matching against the bInterfaceNumber, allowing such devices to be supported without having to resort to testing against interface number whitelists and/or blacklists in the probe. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-05-221-1/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: "Apart from various driver updates and added support for a number of new devices (mostly multitouch ones, but not limited to), there is one change that is worth pointing out explicitly: creation of HID device groups and proper autoloading of hid-multitouch, implemented by Henrik Rydberg." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits) HID: wacom: fix build breakage without CONFIG_LEDS_CLASS HID: waltop: Extend barrel button fix HID: hyperv: Set the hid drvdata correctly HID: wacom: Unify speed setting HID: wacom: Add speed setting for Intuos4 WL HID: wacom: Move Graphire raport header check. HID: uclogic: Add support for UC-Logic TWHL850 HID: explain the signed/unsigned handling in hid_add_field() HID: handle logical min/max signedness properly in parser HID: logitech: read all 32 bits of report type bitfield HID: wacom: Add LED selector control for Wacom Intuos4 WL HID: hid-multitouch: fix wrong protocol detection HID: wiimote: Fix IR data parser HID: wacom: Add tilt reporting for Intuos4 WL HID: multitouch: MT interface matching for Baanto HID: hid-multitouch: Only match MT interfaces HID: Create a common generic driver HID: hid-multitouch: Switch to device groups HID: Create a generic device group HID: Allow bus wildcard matching ...
| * HID: Allow bus wildcard matchingHenrik Rydberg2012-05-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Most HID drivers do not need to know what bus driver is in use. A generic group driver can drive any hid device, and the device list should not need to be duplicated for each new bus. This patch adds wildcard matching to the HID bus, simplifying device list handling for group drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: Add device group to modaliasHenrik Rydberg2012-05-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HID devices are only partially presented to userland. Hotplugged devices emit events containing a modalias based on the basic bus, vendor and product entities. However, in practise a hid device can depend on details such as a single usb interface or a particular item in a report descriptor. This patch adds a device group to the hid device id, and broadcasts it using uevent and the device modalias. The module alias generation is modified to match. As a consequence, a device with a non-zero group will be processed by the corresponding group driver instead of by the generic hid driver. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Fix modpost failures in fedora 17David Miller2012-04-181-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | The symbol table on x86-64 starts to have entries that have names like: _GLOBAL__sub_I_65535_0___mod_x86cpu_device_table They are of type STT_FUNCTION and this one had a length of 18. This matched the device ID validation logic and it barfed because the length did not meet the device type's criteria. -------------------- FATAL: arch/x86/crypto/aesni-intel: sizeof(struct x86cpu_device_id)=16 is not a modulo of the size of section __mod_x86cpu_device_table=18. Fix definition of struct x86cpu_device_id in mod_devicetable.h -------------------- These are some kind of compiler tool internal stuff being emitted and not something we want to inspect in modpost's device ID table validation code. So skip the symbol if it is not of type STT_OBJECT. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
* Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman2012-03-091-5/+32
|\ | | | | | | | | | | This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mod/file2alias: make modpost compile on darwin againAndreas Bießmann2012-02-271-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e49ce14150c64b29a8dd211df785576fa19a9858 breaks cross compiling the linux kernel on darwin hosts. This fix introduce some minimal glue to adopt linker section handling for darwin hosts. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jochen Friedrich <jochen@scram.de> CC: Samuel Ortiz <sameo@linux.intel.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Bernhard Walle <bernhard@bwalle.de>
| * module: fix broken isapnp handling in file2aliasOndrej Zary2012-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Handling of isapnp module aliases was broken by commit 626596e295d477c0fefa08cd5daa7dd011b1bb2c by changing "isapnp" string to "isa". The code was then modified by commit e49ce14150c64b29a8dd211df785576fa19a9858 but this bug remained. Change the string back to "isapnp". Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | x86/cpu: Clean up modalias feature matchingBen Hutchings2012-02-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently include commas on both sides of the feature ID in a modalias, but this prevents the lowest numbered feature of a CPU from being matched. Since all feature IDs have the same length, we do not need to worry about substring matches, so omit commas from the modalias entirely. Avoid generating multiple adjacent wildcards when there is no feature ID to match. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman2012-02-021-10/+0
|\ \ | |/ | | | | | | | | | | | | This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King2012-01-201-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
* | Add driver auto probing for x86 features v4Andi Kleen2012-01-261-0/+24
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a growing number of drivers that support a specific x86 feature or CPU. Currently loading these drivers currently on a generic distribution requires various driver specific hacks and it often doesn't work. This patch adds auto probing for drivers based on the x86 cpuid information, in particular based on vendor/family/model number and also based on CPUID feature bits. For example a common issue is not loading the SSE 4.2 accelerated CRC module: this can significantly lower the performance of BTRFS which relies on fast CRC. Another issue is loading the right CPUFREQ driver for the current CPU. Currently distributions often try all all possible driver until one sticks, which is not really a good way to do this. It works with existing udev without any changes. The code exports the x86 information as a generic string in sysfs that can be matched by udev's pattern matching. This scheme does not support numeric ranges, so if you want to handle e.g. ranges of model numbers they have to be encoded in ASCII or simply all models or families listed. Fixing that would require changing udev. Another issue is that udev will happily load all drivers that match, there is currently no nice way to stop a specific driver from being loaded if it's not needed (e.g. if you don't need fast CRC) But there are not that many cpu specific drivers around and they're all not that bloated, so this isn't a particularly serious issue. Originally this patch added the modalias to the normal cpu sysdevs. However sysdevs don't have all the infrastructure needed for udev, so it couldn't really autoload drivers. This patch instead adds the CPU modaliases to the cpuid devices, which are real devices with full support for udev. This implies that the cpuid driver has to be loaded to use this. This patch just adds infrastructure, some driver conversions in followups. Thanks to Kay for helping with some sysfs magic. v2: Constifcation, some updates v4: (trenn@suse.de): - Use kzalloc instead of kmalloc to terminate modalias buffer - Use uppercase hex values to match correctly against hex values containing letters Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jen Axboe <axboe@kernel.dk> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds2012-01-141-125/+92
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
| * modpost: use linker section to generate table.Rusty Russell2012-01-131-45/+61
| | | | | | | | | | | | | | | | | | | | | | This means (most) future busses need only have one hunk in their patch. Also took the opportunity to check that function matches the type. Again, inspired by Alessandro's patch series. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Alessandro Rubini <rubini@gnudd.com>
| * modpost: use a table rather than a giant if/else statement.Rusty Russell2012-01-131-119/+73
| | | | | | | | | | | | | | | | | | | | | | We look for symbols of form __mod_<busname>_device_table, and for all but three cases we use a standard interation function (do_table) to walk over the contents and dump out the aliases. Alessandro Rubini did this first, I just repainted the bikeshed a bit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Alessandro Rubini <rubini@gnudd.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2012-01-131-0/+13
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
| * ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.Jochen Friedrich2012-01-091-0/+13
| | | | | | | | | | Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | ARM: amba: Auto-generate AMBA driver module aliases during modpostDave Martin2011-11-221-0/+72
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the necessary support in file2alias.c to define suitable aliases based on the amba_id table in AMBA driver modules. This should be sufficient to allow such modules to be auto-loaded via udev. The AMBA bus driver's uevent hotplug code is also modified to pass an approriate MODALIAS string in the event. For simplicity, the AMBA ID is treated an an opaque 32-bit numeber. Module alises use patterns as appropriate to describe the value- mask pairs described in the driver's amba_id list. The proposed alias format is (extended regex): ^amba:d(HEX){8}$ Where HEX is a single upper-case HEX digit or a pattern (? or [] expression) matching a single upper-case HEX digit, as expected by udev. "d" is short for "device", following existing alias naming conventions for other device types. This adds some flexibility for unambiguously extending the alias format in the future by adding additional leading and trailing fields, if this turns out to be necessary. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com>
* Staging: hv: file2alias: fix up alias creation logic for hv_vmbus_device_idGreg Kroah-Hartman2011-08-251-2/+2
| | | | | | | | | | | | | | When I added the driver_data field to hv_vmbus_device_id, I forgot to take into the account how the alias was created, so it would append the kernel pointer to the end of the alias, which is not correct. This changes how the hv_vmbus_device_id alias is created to proper account for the driver_data field. As no module yet uses this alias, it is safe to fix this up at this point in the commit stream. Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Staging: hv: Add code to parse struct hv_vmbus_device_id tableK. Y. Srinivasan2011-08-251-0/+25
| | | | | | | | Add code to parse struct hv_vmbus_device_id table. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* bcma: add Broadcom specific AMBA bus driverRafał Miłecki2011-05-101-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge commit 'v2.6.35' into kbuild/kbuildMichal Marek2010-08-041-0/+57
|\ | | | | | | | | Conflicts: arch/powerpc/Makefile
OpenPOWER on IntegriCloud