summaryrefslogtreecommitdiffstats
path: root/samples
Commit message (Collapse)AuthorAgeFilesLines
* bpf: allow BPF programs access 'protocol' and 'vlan_tci' fieldsAlexei Starovoitov2015-03-171-0/+9
| | | | | | | | | | | | | as a follow on to patch 70006af95515 ("bpf: allow eBPF access skb fields") this patch allows 'protocol' and 'vlan_tci' fields to be accessible from extended BPF programs. The usage of 'protocol', 'vlan_present' and 'vlan_tci' fields is the same as corresponding SKF_AD_PROTOCOL, SKF_AD_VLAN_TAG_PRESENT and SKF_AD_VLAN_TAG accesses in classic BPF. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: add skb->field examples and testsAlexei Starovoitov2015-03-155-16/+101
| | | | | | | | | - modify sockex1 example to count number of bytes in outgoing packets - modify sockex2 example to count number of bytes and packets per flow - add 4 stress tests that exercise 'skb->field' code path of verifier Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ebpf: export BPF_PSEUDO_MAP_FD to uapiDaniel Borkmann2015-03-011-1/+3
| | | | | | | | | | | | | | | | We need to export BPF_PSEUDO_MAP_FD to user space, as it's used in the ELF BPF loader where instructions are being loaded that need map fixups. An initial stage loads all maps into the kernel, and later on replaces related instructions in the eBPF blob with BPF_PSEUDO_MAP_FD as source register and the actual fd as immediate value. The kernel verifier recognizes this keyword and replaces the map fd with a real pointer internally. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ebpf: remove kernel test stubsDaniel Borkmann2015-03-011-2/+3
| | | | | | | | | | | | | Now that we have BPF_PROG_TYPE_SOCKET_FILTER up and running, we can remove the test stubs which were added to get the verifier suite up. We can just let the test cases probe under socket filter type instead. In the fill/spill test case, we cannot (yet) access fields from the context (skb), but we may adapt that test case in future. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Show the results rather than just commenting where they areBen Hutchings2015-02-238-16/+8
| | | | | Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Trap SIGINTBen Hutchings2015-02-238-0/+8
| | | | | | | Otherwise ^C stops the script, not just pktgen. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Use bash as interpreterBen Hutchings2015-02-238-8/+8
| | | | | | | | | These scripts use the non-POSIX 'function' and 'local' keywords so they won't work with every /bin/sh. We could drop 'function' as it is a no-op, but 'local' makes for cleaner scripts. Require use of bash. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Remove setting of obsolete max_before_softirq parameterBen Hutchings2015-02-238-18/+0
| | | | | Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Correct comments about the thread configBen Hutchings2015-02-238-8/+9
| | | | | | | | | | | | They all claimed to be two CPU examples using eth1, eth2 but that is only true in one case! Rob Jones pointed out spelling and grammar errors here, which I've also corrected. Cc: Rob Jones <rob.jones@codethink.co.uk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Delete unused function pg()Ben Hutchings2015-02-238-40/+0
| | | | | | | | This function is not used and wouldn't do anything useful as pktgen does not have an 'inject' command. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/pktgen: Add sample scripts for pktgen facilityBen Hutchings2015-02-238-0/+578
| | | | | | | | | | | | | These are Robert Olsson's samples which used to be available from <ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/> but currently are not. Change the documentation to refer to these consistently as 'sample scripts', matching the directory name used here. Cc: Robert Olsson <robert@herjulf.se> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples/seccomp: improve label helperKees Cook2015-02-172-1/+9
| | | | | | | | | | | | Fixes a potential corruption with uninitialized stack memory in the seccomp BPF sample program. [akpm@linux-foundation.org: coding-style fixlet] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Robert Swiecki <swiecki@google.com> Tested-by: Robert Swiecki <swiecki@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'trace-v3.20' of ↵Linus Torvalds2015-02-122-14/+394
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The updates included in this pull request for ftrace are: o Several clean ups to the code One such clean up was to convert to 64 bit time keeping, in the ring buffer benchmark code. o Adding of __print_array() helper macro for TRACE_EVENT() o Updating the sample/trace_events/ to add samples of different ways to make trace events. Lots of features have been added since the sample code was made, and these features are mostly unknown. Developers have been making their own hacks to do things that are already available. o Performance improvements. Most notably, I found a performance bug where a waiter that is waiting for a full page from the ring buffer will see that a full page is not available, and go to sleep. The sched event caused by it going to sleep would cause it to wake up again. It would see that there was still not a full page, and go back to sleep again, and that would wake it up again, until finally it would see a full page. This change has been marked for stable. Other improvements include removing global locks from fast paths" * tag 'trace-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Do not wake up a splice waiter when page is not full tracing: Fix unmapping loop in tracing_mark_write tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT() tracing: Add TRACE_EVENT_FN example tracing: Add TRACE_EVENT_CONDITION sample tracing: Update the TRACE_EVENT fields available in the sample code tracing: Separate out initializing top level dir from instances tracing: Make tracing_init_dentry_tr() static trace: Use 64-bit timekeeping tracing: Add array printing helper tracing: Remove newline from trace_printk warning banner tracing: Use IS_ERR() check for return value of tracing_init_dentry() tracing: Remove unneeded includes of debugfs.h and fs.h tracing: Remove taking of trace_types_lock in pipe files tracing: Add ref count to tracer for when they are being read by pipe
| * tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()Steven Rostedt (Red Hat)2015-02-092-0/+88
| | | | | | | | | | | | | | | | Add to samples/trace_events/ the macros DECLARE_EVENT_CLASS() and DEFINE_EVENT() and recommend using them over multiple TRACE_EVENT() macros if the multiple events have the same format. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
| * tracing: Add TRACE_EVENT_FN exampleSteven Rostedt (Red Hat)2015-02-092-0/+95
| | | | | | | | | | | | | | | | | | If a function should be called before a tracepoint is enabled and/or after it is disabled, the TRACE_EVENT_FN() serves this purpose. But it is not well documented. Having it as a sample would help developers to know how to use it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
| * tracing: Add TRACE_EVENT_CONDITION sampleSteven Rostedt (Red Hat)2015-02-092-0/+61
| | | | | | | | | | | | | | | | The sample code lacks an example of TRACE_EVENT_CONDITION, and it has been expressed to me that this feature for TRACE_EVENT is not well known and not used when it could be. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
| * tracing: Update the TRACE_EVENT fields available in the sample codeSteven Rostedt (Red Hat)2015-02-092-14/+150
| | | | | | | | | | | | | | | | | | The sample code in samples/trace_events/ is extremely out of date and does not show all the new fields that have been added since the sample code was written. As most people are unaware of these new fields, adding sample code and explanations of those fields should help out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-02-104-1/+100
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull live patching infrastructure from Jiri Kosina: "Let me provide a bit of history first, before describing what is in this pile. Originally, there was kSplice as a standalone project that implemented stop_machine()-based patching for the linux kernel. This project got later acquired, and the current owner is providing live patching as a proprietary service, without any intentions to have their implementation merged. Then, due to rising user/customer demand, both Red Hat and SUSE started working on their own implementation (not knowing about each other), and announced first versions roughly at the same time [1] [2]. The principle difference between the two solutions is how they are making sure that the patching is performed in a consistent way when it comes to different execution threads with respect to the semantic nature of the change that is being introduced. In a nutshell, kPatch is issuing stop_machine(), then looking at stacks of all existing processess, and if it decides that the system is in a state that can be patched safely, it proceeds insterting code redirection machinery to the patched functions. On the other hand, kGraft provides a per-thread consistency during one single pass of a process through the kernel and performs a lazy contignuous migration of threads from "unpatched" universe to the "patched" one at safe checkpoints. If interested in a more detailed discussion about the consistency models and its possible combinations, please see the thread that evolved around [3]. It pretty quickly became obvious to the interested parties that it's absolutely impractical in this case to have several isolated solutions for one task to co-exist in the kernel. During a dedicated Live Kernel Patching track at LPC in Dusseldorf, all the interested parties sat together and came up with a joint aproach that would work for both distro vendors. Steven Rostedt took notes [4] from this meeting. And the foundation for that aproach is what's present in this pull request. It provides a basic infrastructure for function "live patching" (i.e. code redirection), including API for kernel modules containing the actual patches, and API/ABI for userspace to be able to operate on the patches (look up what patches are applied, enable/disable them, etc). It's relatively simple and minimalistic, as it's making use of existing kernel infrastructure (namely ftrace) as much as possible. It's also self-contained, in a sense that it doesn't hook itself in any other kernel subsystem (it doesn't even touch any other code). It's now implemented for x86 only as a reference architecture, but support for powerpc, s390 and arm is already in the works (adding arch-specific support basically boils down to teaching ftrace about regs-saving). Once this common infrastructure gets merged, both Red Hat and SUSE have agreed to immediately start porting their current solutions on top of this, abandoning their out-of-tree code. The plan basically is that each patch will be marked by flag(s) that would indicate which consistency model it is willing to use (again, the details have been sketched out already in the thread at [3]). Before this happens, the current codebase can be used to patch a large group of secruity/stability problems the patches for which are not too complex (in a sense that they don't introduce non-trivial change of function's return value semantics, they don't change layout of data structures, etc) -- this corresponds to LEAVE_FUNCTION && SWITCH_FUNCTION semantics described at [3]. This tree has been in linux-next since December. [1] https://lkml.org/lkml/2014/4/30/477 [2] https://lkml.org/lkml/2014/7/14/857 [3] https://lkml.org/lkml/2014/11/7/354 [4] http://linuxplumbersconf.org/2014/wp-content/uploads/2014/10/LPC2014_LivePatching.txt [ The core code is introduced by the three commits authored by Seth Jennings, which got a lot of changes incorporated during numerous respins and reviews of the initial implementation. All the followup commits have materialized only after public tree has been created, so they were not folded into initial three commits so that the public tree doesn't get rebased ]" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing newline to error message livepatch: rename config to CONFIG_LIVEPATCH livepatch: fix uninitialized return value livepatch: support for repatching a function livepatch: enforce patch stacking semantics livepatch: change ARCH_HAVE_LIVE_PATCHING to HAVE_LIVE_PATCHING livepatch: fix deferred module patching order livepatch: handle ancient compilers with more grace livepatch: kconfig: use bool instead of boolean livepatch: samples: fix usage example comments livepatch: MAINTAINERS: add git tree location livepatch: use FTRACE_OPS_FL_IPMODIFY livepatch: move x86 specific ftrace handler code to arch/x86 livepatch: samples: add sample live patching module livepatch: kernel: add support for live patching livepatch: kernel: add TAINT_LIVEPATCH
| * | livepatch: rename config to CONFIG_LIVEPATCHJosh Poimboeuf2015-02-042-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename CONFIG_LIVE_PATCHING to CONFIG_LIVEPATCH to make the naming of the config and the code more consistent. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | livepatch: samples: fix usage example commentsJosh Poimboeuf2014-12-241-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a few typos in the livepatch-sample.c usage example comments and add some whitespace to make the comments a little more legible. Reported-by: Udo Seidel <udoseidel@gmx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | livepatch: samples: add sample live patching moduleSeth Jennings2014-12-224-1/+96
| |/ | | | | | | | | | | | | | | | | | | Add a sample live patching module. Signed-off-by: Seth Jennings <sjenning@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | samples: bpf: relax test_maps checkAlexei Starovoitov2015-01-261-2/+2
|/ | | | | | | | | | | hash map is unordered, so get_next_key() iterator shouldn't rely on particular order of elements. So relax this test. Fixes: ffb65f27a155 ("bpf: add a testsuite for eBPF maps") Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: large eBPF program in CAlexei Starovoitov2014-12-053-0/+263
| | | | | | | | | | | | | | | | | | | | | | | sockex2_kern.c is purposefully large eBPF program in C. llvm compiles ~200 lines of C code into ~300 eBPF instructions. It's similar to __skb_flow_dissect() to demonstrate that complex packet parsing can be done by eBPF. Then it uses (struct flow_keys)->dst IP address (or hash of ipv6 dst) to keep stats of number of packets per IP. User space loads eBPF program, attaches it to loopback interface and prints dest_ip->#packets stats every second. Usage: $sudo samples/bpf/sockex2 ip 127.0.0.1 count 19 ip 127.0.0.1 count 178115 ip 127.0.0.1 count 369437 ip 127.0.0.1 count 559841 ip 127.0.0.1 count 750539 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: trivial eBPF program in CAlexei Starovoitov2014-12-054-1/+89
| | | | | | | | | | | | | | | | | | | | this example does the same task as previous socket example in assembler, but this one does it in C. eBPF program in kernel does: /* assume that packet is IPv4, load one byte of IP->proto */ int index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); long *value; value = bpf_map_lookup_elem(&my_map, &index); if (value) __sync_fetch_and_add(value, 1); Corresponding user space reads map[tcp], map[udp], map[icmp] and prints protocol stats every second Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: elf_bpf file loaderAlexei Starovoitov2014-12-053-0/+267
| | | | | | | | | | | | | | | | | | | | | | simple .o parser and loader using BPF syscall. .o is a standard ELF generated by LLVM backend It parses elf file compiled by llvm .c->.o - parses 'maps' section and creates maps via BPF syscall - parses 'license' section and passes it to syscall - parses elf relocations for BPF maps and adjusts BPF_LD_IMM64 insns by storing map_fd into insn->imm and marking such insns as BPF_PSEUDO_MAP_FD - loads eBPF programs via BPF syscall One ELF file can contain multiple BPF programs. int load_bpf_file(char *path); populates prog_fd[] and map_fd[] with FDs received from bpf syscall bpf_helpers.h - helper functions available to eBPF programs written in C Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: example of stateful socket filteringAlexei Starovoitov2014-12-054-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this socket filter example does: - creates arraymap in kernel with key 4 bytes and value 8 bytes - loads eBPF program which assumes that packet is IPv4 and loads one byte of IP->proto from the packet and uses it as a key in a map r0 = skb->data[ETH_HLEN + offsetof(struct iphdr, protocol)]; *(u32*)(fp - 4) = r0; value = bpf_map_lookup_elem(map_fd, fp - 4); if (value) (*(u64*)value) += 1; - attaches this program to raw socket - every second user space reads map[IPPROTO_TCP], map[IPPROTO_UDP], map[IPPROTO_ICMP] to see how many packets of given protocol were seen on loopback interface Usage: $sudo samples/bpf/sock_example TCP 0 UDP 0 ICMP 0 packets TCP 187600 UDP 0 ICMP 4 packets TCP 376504 UDP 0 ICMP 8 packets TCP 563116 UDP 0 ICMP 12 packets TCP 753144 UDP 0 ICMP 16 packets Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bpf: remove test map scaffolding and user proper typesAlexei Starovoitov2014-11-181-7/+7
| | | | | | | | proper types and function helpers are ready. Use them in verifier testsuite. Remove temporary stubs Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bpf: add a testsuite for eBPF mapsAlexei Starovoitov2014-11-184-3/+296
| | | | | | | | | . check error conditions and sanity of hash and array map APIs . check large maps (that kernel gracefully switches to vmalloc from kmalloc) . check multi-process parallel access and stress test Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* samples: bpf: add a verifier test and summary lineAlexei Starovoitov2014-10-301-1/+45
| | | | | | | | | | | | - add a test specifically targeting verifier state pruning. It checks state propagation between registers, storing that state into stack and state pruning algorithm recognizing equivalent stack and register states. - add summary line to spot failures easier Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bpf: fix bug in eBPF verifierAlexei Starovoitov2014-10-211-0/+11
| | | | | | | | | | | | while comparing for verifier state equivalency the comparison was missing a check for uninitialized register. Make sure it does so and add a testcase. Fixes: f1bca824dabb ("bpf: add search pruning optimization to verifier") Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-10-084-0/+956
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
| * bpf: add tests to verifier testsuiteAlexei Starovoitov2014-10-011-0/+130
| | | | | | | | | | | | | | add 4 extra tests to cover jump verification better Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bpf: mini eBPF library, test stubs and verifier testsuiteAlexei Starovoitov2014-09-264-0/+826
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. the library includes a trivial set of BPF syscall wrappers: int bpf_create_map(int key_size, int value_size, int max_entries); int bpf_update_elem(int fd, void *key, void *value); int bpf_lookup_elem(int fd, void *key, void *value); int bpf_delete_elem(int fd, void *key); int bpf_get_next_key(int fd, void *key, void *next_key); int bpf_prog_load(enum bpf_prog_type prog_type, const struct sock_filter_int *insns, int insn_len, const char *license); bpf_prog_load() stores verifier log into global bpf_log_buf[] array and BPF_*() macros to build instructions 2. test stubs configure eBPF infra with 'unspec' map and program types. These are fake types used by user space testsuite only. 3. verifier tests valid and invalid programs and expects predefined error log messages from kernel. 40 tests so far. $ sudo ./test_verifier #0 add+sub+mul OK #1 unreachable OK #2 unreachable2 OK #3 out of range jump OK #4 out of range jump2 OK #5 test1 ld_imm64 OK ... Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | kprobes: update jprobe_example.c for do_fork() changeMichael Ellerman2014-09-261-5/+4
|/ | | | | | | | | | | | | | | In commit e80d666 "flagday: kill pt_regs argument of do_fork()", the arguments to do_fork() changed. The example code in jprobe_example.c was not updated to match, so the arguments inside the jprobe handler do not match reality. Fix it by updating the arguments to match do_fork(). While we're at it use pr_info() for brevity, and print stack_start as well for interest. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* tracing: Change trace event sample to use strlcpy instead of strncpyZhao Hongjiang2014-07-011-1/+1
| | | | | | | | | | | | | | Strings should be copied with strlcpy instead of strncpy when they will later be printed via %s. This guarantees that they terminate with a NUL '\0' character and do not run pass the end of the allocated string. This is only for sample code, but it should stil represent a good role model. Link: http://lkml.kernel.org/p/51C2E204.1080501@huawei.com Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* tracing: Add __field_struct macro for TRACE_EVENT()Steven Rostedt2014-06-211-1/+2
| | | | | | | | | | | | | | | | | | | Currently the __field() macro in TRACE_EVENT is only good for primitive values, such as integers and pointers, but it fails on complex data types such as structures or unions. This is because the __field() macro determines if the variable is signed or not with the test of: (((type)(-1)) < (type)1) Unfortunately, that fails when type is a structure. Since trace events should support structures as fields a new macro is created for such a case called __field_struct() which acts exactly the same as __field() does but it does not do the signed type check and just uses a constant false for that answer. Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* samples/kobject/: avoid world-writable sysfs files.Rusty Russell2014-05-142-6/+8
| | | | | | | | In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* samples/seccomp/Makefile: do not build tests if cross-compiling for MIPSMarkos Chandras2014-04-031-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The Makefile is designed to use the host toolchain so it may be unsafe to build the tests if the kernel has been configured and built for another architecture. This fixes a build problem when the kernel has been configured and built for the MIPS architecture but the host is not MIPS (cross-compiled). The MIPS syscalls are only defined if one of the following is true: 1) _MIPS_SIM == _MIPS_SIM_ABI64 2) _MIPS_SIM == _MIPS_SIM_ABI32 3) _MIPS_SIM == _MIPS_SIM_NABI32 Of course, none of these make sense on a non-MIPS toolchain and the following build problem occurs when building on a non-MIPS host. linux/usr/include/linux/kexec.h:50: userspace cannot reference function or variable defined in the kernel samples/seccomp/bpf-direct.c: In function `emulator': samples/seccomp/bpf-direct.c:76:17: error: `__NR_write' undeclared (first use in this function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kobject: fix kset sample error pathBjorn Helgaas2013-12-031-0/+1
| | | | | | | | | Previously, example_init() leaked a kset if any of the object creations failed. This fixes the leak by calling kset_unregister() in the error path. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* kfifo API type safetyStefani Seibold2013-11-153-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | This patch enhances the type safety for the kfifo API. It is now safe to put const data into a non const FIFO and the API will now generate a compiler warning when reading from the fifo where the destination address is pointing to a const variable. As a side effect the kfifo_put() does now expect the value of an element instead a pointer to the element. This was suggested Russell King. It make the handling of the kfifo_put easier since there is no need to create a helper variable for getting the address of a pointer or to pass integers of different sizes. IMHO the API break is okay, since there are currently only six users of kfifo_put(). The code is also cleaner by kicking out the "if (0)" expressions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds2013-09-061-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
| * tile: support kprobes on tilegxTony Lu2013-08-301-0/+9
| | | | | | | | | | | | | | | | This change includes support for Kprobes, Jprobes and Return Probes. Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tony Lu <zlu@tilera.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| |
| \
*-. \ Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', ↵Jiri Kosina2013-09-062-20/+104
|\ \ \ | |_|/ |/| | | | | 'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus
| | * HID: samples/hidraw: add .gitignore filePaul Gortmaker2013-08-201-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | To fix: # Untracked files: # (use "git add <file>..." to include in what will be committed) # # samples/hidraw/hid-example as seen in git status output after an allyesconfig build. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: uhid: improve uhid example clientDavid Herrmann2013-09-041-20/+103
|/ | | | | | | | | | | | | | | | This extends the uhid example client. It properly documents the built-in report-descriptor an adds explicit report-numbers. Furthermore, LED output reports are added to utilize the new UHID output reports of the kernel. Support for 3 basic LEDs is added and a small report-parser to print debug messages if output reports were received. To test this, simply write the EV_LED+LED_CAPSL+1 event to the evdev device-node of the uhid-device and the kernel will forward it to your uhid client. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: hidraw: warn if userspace headers are outdatedJiri Kosina2013-03-271-2/+1
| | | | | | | | Put a warning into sample hidraw code in samples/hidraw/hid-example.c in case the userspace headers are missing the necessary defines and need to be updated. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2013-02-197-182/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
| * tracing: Remove tracepoint sample codeSteven Rostedt2013-01-257-182/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tracepoint sample code was used to teach developers how to create their own tracepoints. But now the trace_events have been added as a higher level that is used directly by developers today. Only the trace_event code should use the tracepoint interface directly and no new tracepoints should be added. Besides, the example had a race condition with the use of the ->d_name.name dentry field, as pointed out by Al Viro. Best just to remove the code so it wont be used by other developers. Link: http://lkml.kernel.org/r/20130123225523.GY4939@ZenIV.linux.org.uk Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | samples/seccomp: be less stupid about cross compilingArnd Bergmann2013-02-051-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | The seccomp filters are currently built for the build host, not for the machine that they are going to run on, but they are also built for with the -m32 flag if the kernel is built for a 32 bit machine, both of which seems rather odd. It broke allyesconfig on my machine, which is x86-64, but building for 32 bit ARM, with this error message: In file included from /usr/include/stdio.h:28:0, from samples/seccomp/bpf-fancy.c:15: /usr/include/features.h:324:26: fatal error: bits/predefs.h: No such file or directory because there are no 32 bit libc headers installed on this machine. We should really be building all the samples for the target machine rather than the build host, but since the infrastructure for that appears to be missing right now, let's be a little bit smarter and not pass the '-m32' flag to the HOSTCC when cross- compiling. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Morris <james.l.morris@oracle.com> Acked-by: Will Drewry <wad@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* misc: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-2/+2
| | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the last of the __dev* markings from the kernel from a variety of different, tiny, places. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud