summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* [TCP]: Return useful listenq info in tcp_info and INET_DIAG_INFO.Rick Jones2007-10-102-5/+12
| | | | | | | | | | Return some useful information such as the maximum listen backlog and the current listen backlog in the tcp_info structure and INET_DIAG_INFO. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS]: Cleanup list walking in setup_net and cleanup_netPavel Emelyanov2007-10-101-8/+4
| | | | | | | | | | | | | | | I proposed introducing a list_for_each_entry_continue_reverse macro to be used in setup_net() when unrolling the failed ->init callback. Here is the macro and some more cleanup in the setup_net() itself to remove one variable from the stack :) The same thing is for the cleanup_net() - the existing list_for_each_entry_reverse() is used. Minor, but the code looks nicer. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Tie ADD-IP and AUTH functionality as required by spec.Vlad Yasevich2007-10-101-1/+12
| | | | | | | | | ADD-IP spec requires AUTH. It is, in fact, dangerous without AUTH. So, disable ADD-IP functionality if the peer claims to support ADD-IP, but not AUTH. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: API updates to suport SCTP-AUTH extensions.Vlad Yasevich2007-10-104-0/+547
| | | | | | | | | | Add SCTP-AUTH API. The API implemented here was agreed to between implementors at the 9th SCTP Interop. It will be documented in the next revision of the SCTP socket API spec. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement the receive and verification of AUTH chunkVlad Yasevich2007-10-106-12/+362
| | | | | | | | | This patch implements the receive path needed to process authenticated chunks. Add ability to process the AUTH chunk and handle edge cases for authenticated COOKIE-ECHO as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Enable the sending of the AUTH chunk.Vlad Yasevich2007-10-103-27/+155
| | | | | | | | | | | | | | | | | | | | | SCTP-AUTH, Section 6.2: Endpoints MUST send all requested chunks authenticated where this has been requested by the peer. The other chunks MAY be sent authenticated or not. If endpoint pair shared keys are used, one of them MUST be selected for authentication. To send chunks in an authenticated way, the sender MUST include these chunks after an AUTH chunk. This means that a sender MUST bundle chunks in order to authenticate them. If the endpoint has no endpoint pair shared key for the peer, it MUST use Shared Key Identifier 0 with an empty endpoint pair shared key. If there are multiple endpoint shared keys the sender selects one and uses the corresponding Shared Key Identifier Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implete SCTP-AUTH parameter processingVlad Yasevich2007-10-104-4/+219
| | | | | | | | | | | | Implement processing for the CHUNKS, RANDOM, and HMAC parameters and deal with how this parameters are effected by association restarts. In particular, during unexpeted INIT processing, we need to reply with parameters from the original INIT chunk. Also, after restart, we need to update the old association with new peer parameters and change the association shared keys. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP-AUTH initializations.Vlad Yasevich2007-10-105-0/+133
| | | | | | | | The patch initializes AUTH related members of the generic SCTP structures and provides a way to enable/disable auth extension. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP-AUTH internalsVlad Yasevich2007-10-103-1/+749
| | | | | | | | | This patch implements the internals operations of the AUTH, such as key computation and storage. It also adds necessary variables to the SCTP data structures. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Add ICMPMsgStats MIB (RFC 4293)David L Stevens2007-10-105-78/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]David L Stevens2007-10-107-62/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. [new to 2nd revision] 6) support per-interface ICMP stats 7) use common macro for per-device stat macros Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: all net/ cleanup with ARRAY_SIZEDenis Cheng2007-10-102-2/+2
| | | | Signed-off-by: Denis Cheng <crquan@gmail.com>
* [IPV4] af_inet.c: use ARRAY_SIZE macro from kernel.h insteadDenis Cheng2007-10-101-1/+1
| | | | | Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETLINK]: the temp variable name max is ambiguousDenis Cheng2007-10-101-6/+6
| | | | | | | | with the macro max provided by <linux/kernel.h>, so changed its name to a more proper one: limit Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETLINK]: use the macro min(x,y) provided by <linux/kernel.h> insteadDenis Cheng2007-10-101-1/+1
| | | | | Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKBUFF]: Fix up csum_start when head room changesHerbert Xu2007-10-101-10/+8
| | | | | | | | | | | | | Thanks for noticing the bug where csum_start is not updated when the head room changes. This patch fixes that. It also moves the csum/ip_summed copying into copy_skb_header so that skb_copy_expand gets it too. I've checked its callers and no one should be upset by this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETLINK]: Avoid pointer in netlink_run_queueHerbert Xu2007-10-106-13/+15
| | | | | | | | | | | I was looking at Patrick's fix to inet_diag and it occured to me that we're using a pointer argument to return values unnecessarily in netlink_run_queue. Changing it to return the value will allow the compiler to generate better code since the value won't have to be memory-backed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Move sysctl_sctp_[rw]mem definitions to protocol.cVlad Yasevich2007-10-102-11/+6
| | | | | | | | | The sctp_[rw]mem definitions should really be in protocol.c since that is where they are initialized. This also allows one to build a kernel without sysctl support. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement the Supported Extensions ParameterVlad Yasevich2007-10-101-2/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP Supported Extenions parameter is specified in Section 4.2.7 of the ADD-IP draft (soon to be RFC). The parameter is encoded as: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Parameter Type = 0x8008 | Parameter Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CHUNK TYPE 1 | CHUNK TYPE 2 | CHUNK TYPE 3 | CHUNK TYPE 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | .... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CHUNK TYPE N | PAD | PAD | PAD | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ It contains a list of chunks that a particular SCTP extension uses. Current extensions supported are Partial Reliability (FWD-TSN) and ADD-IP (ASCONF and ASCONF-ACK). When implementing new extensions (AUTH, PKT-DROP, etc..), new chunks need to be added to this parameter. Parameter processing would be modified to negotiate support for these new features. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4/IPV6/DECNET]: Small cleanup for fib rules.Denis V. Lunev2007-10-104-32/+27
| | | | | | | | | | This patch slightly cleanups FIB rules framework. rules_list as a pointer on struct fib_rules_ops is useless. It is always assigned with a static per/subsystem list in IPv4, IPv6 and DecNet. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Cleanup calling netdev notifiers.Pavel Emelyanov2007-10-101-19/+13
| | | | | | | | | | | | | | The call_netdev_notifiers routine can successfully be used in the net/core_dev.c itself. This will save 6 lines of code and 62 ;) bytes of .text section. 62 is rather small, but I have one more patch saving ~30 bytes from netns code (sent to Eric), so altogether they can save some more noticeable amount. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS]: Consolidate hashes creation in netdev_init()Pavel Emelyanov2007-10-101-17/+24
| | | | | | | | | | The dev_name_hash and the dev_index_hash are now booth kmalloc-ed (and each element is properly initialized as usually) so I think it's worth consolidating this code making it look nicer (and saving 28 bytes of .text section ;) ) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix the prototype of call_netdevice_notifiers.Eric W. Biederman2007-10-101-2/+2
| | | | | | | | This replaces the void * parameter with a struct net_device * which is what is actually required. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: migrate HARD_TX_LOCK to header fileJamal Hadi Salim2007-10-101-12/+0
| | | | | | | | | | HARD_TX_LOCK micro is a nice aggregation that could be used in other spots. move it to netdevice.h Also makes sure the previously superflous cpu arguement is used. Thanks to DaveM for the suggestions. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Remove redundant RTM_DELLINK message.Milan Kocian2007-10-101-2/+0
| | | | | | | | Remove useless message. We get the right message from another subsystem. Signed-off-by: Milan Kocian <milon@wq.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* [CIPSO]: remove duplicated code in the cipso_v4_*_getattr() functionsPaul Moore2007-10-101-73/+42
| | | | | | | | | | | | The bulk of the CIPSO option parsing/processing in the cipso_v4_sock_getattr() and cipso_v4_skb_getattr() functions are identical, the only real difference being where the functions obtain the CIPSO option itself. This patch creates a new function, cipso_v4_getattr(), which contains the common CIPSO option parsing/processing code and modifies the existing functions to call this new helper function. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ETHTOOL] Provide default behaviors for a few ethtool sub-ioctlsJeff Garzik2007-10-102-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-108-11/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove/change some comments about Michael MIC hardware offloadJohannes Berg2007-10-101-14/+11
| | | | | | | | | | | There are a few TODO comments in the mac80211 sources regarding hardware offload for Michael MIC verification. Those items are, however, better handled in the driver instead of the stack, if any device requires such hand-holding. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: PS mode fixTomas Winkler2007-10-101-0/+1
| | | | | | | | tx.mode must be set also for buffered frames. It is used in the tx hanlders Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: use internal network device statsStephen Hemminger2007-10-104-35/+12
| | | | | | | | | Stats are now available for device usage inside network_device Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: get STA after tx radiotap snippedwarmcat2007-10-101-2/+2
| | | | | | | | | | | | Johannes Berg noticed that in __ieee80211_tx_prepare() we try to get the STA from addr1 of the ieee80211 header when the radiotap header is actually still at the front of the packet. This patch defers doing that until the radiotap header is gone. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: ignore key index on pairwise key (WEP only)Volker Braun2007-10-101-6/+12
| | | | | | | | | | | | Work-around for broken APs that use a non-zero key index for WEP pairwise keys. With this patch, WEP encryption only is exempt from providing a zero key index. Signed-off-by: Volker Braun <volker.braun@physik.hu-berlin.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove TKIP mixing for hw accel againJohannes Berg2007-10-101-17/+0
| | | | | | | | | | | | | | | | | | The TKIP mixing code was added for the benefit of Intel's ipw3945 chipset but that code ended up not using it. We have previously identified many problems with this code and it crystallized that library functions for mixing are likely to handle this in much more generality and might allow b43 to take advantage of hardware acceleration for TKIP. Due to these reasons, remove the TKIP mixing for hardware accelerated crypto operations. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove HW_KEY_IDX_INVALIDJohannes Berg2007-10-102-8/+12
| | | | | | | | | | | | | | This patch makes the mac80211/driver interface rely only on the IEEE80211_TXCTL_DO_NOT_ENCRYPT flag to signal to the driver whether a frame should be encrypted or not, since mac80211 internally no longer relies on HW_KEY_IDX_INVALID either this removes it, changes the key index to be a u8 in all places and makes the full range of the value available to drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove set_key_idx callbackJohannes Berg2007-10-101-4/+0
| | | | | | | | | | | | | | | No existing drivers use this callback, hence there's no telling how it might be used. In fact, it is unlikely to be of much use as-is because the default key index isn't something that the driver can do much with without knowing which interface it was for etc. And if it needs the key index for the transmitted frame, it can get it by keeping a reference to the key_conf structure and looking it up by hw_key_idx. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: rework hardware crypto flagsJohannes Berg2007-10-103-46/+26
| | | | | | | | | | | This patch reworks the various hardware crypto related flags to make them more local, i.e. put them with each key or each packet instead of into the hw struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove turbo modesJohannes Berg2007-10-109-56/+57
| | | | | | | | | | | | | | | This patch removes all mention of the atheros turbo modes that can't possibly work properly anyway since in some places we don't check for them when we should. I have no idea what the iwlwifi drivers were doing with these but it can't possibly have been correct. Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: fix race conditions with keysJohannes Berg2007-10-104-27/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: don't send invalid QoS framesJohannes Berg2007-10-101-1/+14
| | | | | | | | | | | | | | | Kalle Valo noticed that QoS frames are sent with an invalid QoS control field; this is because we increase the header length but neither initialise the space nor actually have enough space in the header structure for the QoS control field. This patch fixes it by treating the QoS field specially and appending it explicitly, initialising it to zero. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: remove spy wext ioctlsJohannes Berg2007-10-101-4/+4
| | | | | | | | | | mac80211 never calls wireless_spy_update so these aren't useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Convert rt_check_expire() from softirq processing to workqueue.Eric Dumazet2007-10-101-18/+12
| | | | | | | | | | | | | | | | | | | | | | | | On loaded/big hosts, rt_check_expire() if of litle use, because it generally breaks out of its main loop because of a jiffies change. It can take a long time (read : timer invocations) to actually scan the whole hash table, freeing unused entries. Converting it to use a workqueue instead of softirq is a nice move because we can allow rt_check_expire() to do the scan it is supposed to do, without hogging the CPU. This has an impact on the average number of entries in cache, reducing ram usage. Cache is more responsive to parameter changes (/proc/sys/net/ipv4/route/gc_timeout and /proc/sys/net/ipv4/route/gc_interval) Note: Maybe the default value of gc_interval (60 seconds) is too high, since this means we actually need 5 (300/60) invocations to scan the whole table. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [RFKILL]: Add support for ultrawidebandIvo van Doorn2007-10-102-0/+12
| | | | | | | | This patch will add support for UWB keys to rfkill, support for this has been requested by Inaky. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [RFKILL]: Remove IRDAIvo van Doorn2007-10-102-5/+2
| | | | | | | | | | | | | | | | | As Dmitry pointed out earlier, rfkill-input.c doesn't support irda because there are no users and we shouldn't add unrequired KEY_ defines. However, RFKILL_TYPE_IRDA was defined in the rfkill.h header file and would confuse people about whether it is implemented or not. This patch removes IRDA support completely, so it can be added whenever a driver wants the feature. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix race when opening a proc file while a network namespace is exiting.Eric W. Biederman2007-10-104-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem: proc_net files remember which network namespace the are against but do not remember hold a reference count (as that would pin the network namespace). So we currently have a small window where the reference count on a network namespace may be incremented when opening a /proc file when it has already gone to zero. To fix this introduce maybe_get_net and get_proc_net. maybe_get_net increments the network namespace reference count only if it is greater then zero, ensuring we don't increment a reference count after it has gone to zero. get_proc_net handles all of the magic to go from a proc inode to the network namespace instance and call maybe_get_net on it. PROC_NET the old accessor is removed so that we don't get confused and use the wrong helper function. Then I fix up the callers to use get_proc_net and handle the case case where get_proc_net returns NULL. In that case I return -ENXIO because effectively the network namespace has already gone away so the files we are trying to access don't exist anymore. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET_SCHED]: Cleanup L2T macros and handle oversized packetsJesper Dangaard Brouer2007-10-104-9/+7
| | | | | | | | | | | Change L2T (length to time) macros, in all rate based schedulers, to call a common function qdisc_l2t() that does the rate table lookup. This function handles if the packet size lookup is larger than the rate table, which often occurs with TSO enabled. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP] net/sctp/socket.c: make 3 variables staticAdrian Bunk2007-10-101-3/+3
| | | | | | | | | | This patch makes the following needlessly global variables static: - sctp_memory_pressure - sctp_memory_allocated - sctp_sockets_allocated Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Make sctp_addto_param() static.Adrian Bunk2007-10-101-19/+20
| | | | | | | sctp_addto_param() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETLINK]: Introduce nested and byteorder flag to netlink attributeThomas Graf2007-10-105-15/+15
| | | | | | | | | | | This change allows the generic attribute interface to be used within the netfilter subsystem where this flag was initially introduced. The byte-order flag is yet unused, it's intended use is to allow automatic byte order convertions for all atomic types. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Add a might_sleep() to dev_close().David S. Miller2007-10-101-0/+2
| | | | | | Requested by Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud