summaryrefslogtreecommitdiffstats
path: root/net/wireless
Commit message (Collapse)AuthorAgeFilesLines
* cfg80211: send scan results from work queueJohannes Berg2014-02-066-42/+45
| | | | | | | | | | | | | | | | | | | | | | | | Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: fix scan done raceJohannes Berg2014-02-061-4/+10
| | | | | | | | | | | | | | | | | | | | | | | When an interface/wdev is removed, any ongoing scan should be cancelled by the driver. This will make it call cfg80211, which only queues a work struct. If interface/wdev removal is quick enough, this can leave the scan request pending and processed only after the interface is gone, causing a use-after-free. Fix this by making sure the scan request is not pending after the interface is destroyed. We can't flush or cancel the work item due to locking concerns, but when it'll run it shouldn't find anything to do. This leaves a potential issue, if a new scan gets requested before the work runs, it prematurely stops the running scan, potentially causing another crash. I'll fix that in the next patch. This was particularly observed with P2P_DEVICE wdevs, likely because freeing them is quicker than freeing netdevs. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: re-enable 5/10 MHz supportJohannes Berg2014-02-061-3/+0
| | | | | | | | Unfortunately I forgot this during the merge window, but the patch seems small enough to go in as a fix. The userspace API bug that was the reason for disabling it has long been fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Reset split_start when netlink skb is exhaustedPontus Fuchs2014-02-061-1/+2
| | | | | | | | | | | | | | | When the netlink skb is exhausted split_start is left set. In the subsequent retry, with a larger buffer, the dump is continued from the failing point instead of from the beginning. This was causing my rt28xx based USB dongle to now show up when running "iw list" with an old iw version without split dump support. Cc: stable@vger.kernel.org Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [avoid the entire workaround when state->split is set] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'master' of ↵John W. Linville2014-01-176-78/+76
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * cfg80211: make regulatory_hint() remove REGULATORY_CUSTOM_REGLuis R. Rodriguez2014-01-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The REGULATORY_CUSTOM_REG can be used during early init with the goal of overriding the wiphy's default regulatory settings in case the alpha2 of the device is not known. In the case that the alpha2 becomes known lets avoid having drivers having to clear the REGULATORY_CUSTOM_REG flag by doing it for them when regulatory_hint() is used. Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Merge branch 'for-john' of ↵John W. Linville2014-01-135-78/+74
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
| | * cfg80211: add sanity check for retry limit in wext-compatUjjal Roy2014-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Block setting the wrong values through iwconfig retry command. Add sanity checking before sending the retry limit to the driver. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: Add a function to get the number of supported channelsIlan Peer2014-01-094-26/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a utility function to get the number of channels supported by the device, and update the places in the code that need this data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [replace another occurrence in libertas, fix kernel-doc, fix bugs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: fix wext-compat for getting retry valueUjjal Roy2014-01-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While getting the retry limit, wext-compat returns the value without updating the flag for retry->flags is 0. Also in this case, it updates long retry flag when short and long retry value are unequal. So, iwconfig never showing "Retry short limit" and showing "Retry long limit" when both values are unequal. Updated the flags and corrected the condition properly. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: move vendor/testmode event skb functions out of ifdefJohannes Berg2014-01-061-49/+49
| | | | | | | | | | | | | | | | | | | | | | | | The vendor/testmode event skb functions are needed outside the ifdef for vendor-specific events, so move them out. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211/mac80211: correct qos-map lockingJohannes Berg2013-12-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Since the RTNL can't always be held, use wdev/sdata locking for the qos-map dereference in mac80211. This requires cfg80211 to consistently lock it, which it was missing in one place. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | net: nl80211: __dev_get_by_index instead of dev_get_by_index to find interfaceYing Xue2014-01-141-65/+37
|/ / | | | | | | | | | | | | | | | | | | | | | | As __cfg80211_rdev_from_attrs(), nl80211_dump_wiphy_parse() and nl80211_set_wiphy() are all under rtnl_lock protection, __dev_get_by_index() instead of dev_get_by_index() should be used to find interface handler in them allowing us to avoid to change interface reference counter. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵John W. Linville2014-01-062-10/+16
|\ \ | |/ |/| | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
| * radiotap: fix bitmap-end-finding buffer overrunJohannes Berg2013-12-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Cc: stable@vger.kernel.org Reported-by: Evan Huus <eapache@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * cfg80211: fix WARN_ON for re-association to the expired BSSUjjal Roy2013-12-051-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: Add support for QoS mappingKyeyoon Park2013-12-198-1/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: support vendor-specific eventsJohannes Berg2013-12-191-19/+79
| | | | | | | | | | | | | | | | | | | | In addition to vendor-specific commands, also support vendor-specific events. These must be registered with cfg80211 before they can be used. They're also advertised in nl80211 in the wiphy information so that userspace knows can be expected. The events themselves are sent on a new multicast group called "vendor". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: add VHT support for set_bitrate_maskJanusz Dziedzic2013-12-161-6/+86
| | | | | | | | | | | | | | | | | | Add VHT MCS/NSS set support for nl80211_set_tx_bitrate_mask(). This should be used mainly for test purpose, to check different MCS/NSS VHT combinations. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2013-12-165-151/+152
|\ \
| * \ Merge branch 'master' of ↵John W. Linville2013-12-063-32/+55
| |\ \ | | |/ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
| | * cfg80211: disable CSA for all driversSimon Wunderlich2013-12-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The channel switch announcement code has some major locking problems which can cause a deadlock in worst case. A series of fixes has been proposed, but these are non-trivial and need to be tested first. Therefore disable CSA completely for 3.13. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: ignore supported rates for nonexistant bands on scanFelix Fietkau2013-11-251-0/+4
| | | | | | | | | | | | | | | | | | | | | Fixes wpa_supplicant p2p_find on 5GHz-only devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: disable 5/10 MHz support for all driversJohannes Berg2013-11-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Cc: stable@vger.kernel.org [3.12] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: check nla_nest_start() return valueJohannes Berg2013-11-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity pointed out that we might dereference NULL later if nla_nest_start() returns a failure. This isn't really true since we'd bomb out before, but we should check the return value directly, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: fix error path in nl80211_get_key()Johannes Berg2013-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | Coverity pointed out that in the (practically impossible) error case we leak the message - fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: check nla_put_* return valuesJohannes Berg2013-11-251-22/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity pointed out that in a few functions we don't check the return value of the nla_put_*() calls. Most of these are fairly harmless because the input isn't very dynamic and controlled by the kernel, but the pattern is simply wrong, so fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: fix ibss wext chandef creationSimon Wunderlich2013-11-251-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wext internal chandefs for ibss should be created using the cfg80211_chandef_create() functions. Initializing fields manually is error-prone. Reported-by: Dirk Gouders <dirk@gouders.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | Merge branch 'for-john' of ↵John W. Linville2013-12-0213-453/+787
| |\ \ | | |/ | |/| | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
| * | genetlink: make multicast groups const, prevent abuseJohannes Berg2013-11-191-75/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | genetlink: pass family to functions using groupsJohannes Berg2013-11-191-35/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | genetlink: only pass array to genl_register_family_with_ops()Johannes Berg2013-11-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | genetlink: make all genl_ops users constJohannes Berg2013-11-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that genl_ops are no longer modified in place when registering, they can be made const. This patch was done mostly with spatch: @@ identifier ops; @@ +const struct genl_ops ops[] = { ... }; (except the struct thing in net/openvswitch/datapath.c) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | genetlink: allow making ops constJohannes Berg2013-11-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow making the ops array const by not modifying the ops flags on registration but rather only when ops are sent out in the family information. No users are updated yet except for the pre_doit/post_doit calls in wireless (the only ones that exist now.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵John W. Linville2013-11-089-27/+108
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * \ \ Merge branch 'master' of ↵John W. Linville2013-11-041-10/+17
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
| * \ \ \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-10-233-3/+9
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: misc: Remove extern from function prototypesJoe Perches2013-10-192-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | Merge branch 'master' of ↵John W. Linville2013-10-177-37/+78
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
* | | | | | | cfg80211: don't "leak" uncompleted scansEliad Peller2013-12-053-30/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ___cfg80211_scan_done() can be called in some cases (e.g. on NETDEV_DOWN) before the low level driver notified scan completion (which is indicated by passing leak=true). Clearing rdev->scan_req in this case is buggy, as scan_done_wk might have already being queued/running (and can't be flushed as it takes rtnl()). If a new scan will be requested at this stage, the scan_done_wk will try freeing it (instead of the previous scan), and this will later result in a use after free. Simply remove the "leak" option, and replace it with a standard WARN_ON. An example backtrace after such crash: Unable to handle kernel paging request at virtual address fffffee5 pgd = c0004000 [fffffee5] *pgd=9fdf6821, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM PC is at cfg80211_scan_done+0x28/0xc4 [cfg80211] LR is at __ieee80211_scan_completed+0xe4/0x2dc [mac80211] [<bf0077b0>] (cfg80211_scan_done+0x28/0xc4 [cfg80211]) [<bf0973d4>] (__ieee80211_scan_completed+0xe4/0x2dc [mac80211]) [<bf0982cc>] (ieee80211_scan_work+0x94/0x4f0 [mac80211]) [<c005fd10>] (process_one_work+0x1b0/0x4a8) [<c0060404>] (worker_thread+0x138/0x37c) [<c0066d70>] (kthread+0xa4/0xb0) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | cfg80211: stop sched scan only when neededBarak Bercovitz2013-12-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cfg80211_leave stops sched scan when any station vif is leaving. Add an explicit check and call it only when the relevant vif (the one we scan on) is leaving. Signed-off-by: Barak Bercovitz <barak@wizery.com> [Eliad - changed the commit message a bit] Signed-off-by: Eliad Peller <eliad@wizery.com> [Johannes - add ASSERT_RTNL since that protects the pointer] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | cfg80211: in bitrate_mask, rename mcs to ht_mcsJanusz Dziedzic2013-12-051-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also rename mcs to ht_mcs in struct cfg80211_bitrate_mask. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | nl80211: allow setting bitrate mask back to defaultJanusz Dziedzic2013-12-051-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow setting the bitrate masks back to default by omitting the NL80211_ATTR_TX_RATES attribute. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [rephrase commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | nl80211: allow the use of DFS channel in meshChun-Yeow Yeoh2013-12-041-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This permits the use of DFS channel once the CAC is conducted and no radar is detected. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | nl80211: vendor command supportJohannes Berg2013-12-032-71/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for vendor-specific commands to nl80211. This is intended to be used for really vendor-specific functionality that can't be implemented in a generic fashion for any reason. It's *NOT* intended to be used for any normal/generic feature or any optimisations that could be implemented across drivers. Currently, only vendor commands (with replies) are supported, no dump operations or vendor-specific notifications. Also add a function wdev_to_ieee80211_vif() to mac80211 which is needed for mac80211-based drivers wanting to implement any vendor commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | nl80211: don't clear bitrate_mask twiceJanusz Dziedzic2013-12-031-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't clear cfg80211_bitrate_mask twice in nl80211_set_tx_bitrate_mask() function. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | cfg80211: DFS check dfs_region before usageLuis R. Rodriguez2013-12-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check the DFS region before channel availability check. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | cfg80211: add reg_get_dfs_region()Luis R. Rodriguez2013-12-032-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This can be used outside of the regulatory context for any checks on the DFS region. The central cfg80211 dfs_region is always used and if it does not match with the wiphy a debug print is issued. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | | nl80211/cfg80211: Set Operating Mode NotificationMarek Kwaczynski2013-12-031-0/+7
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This attribute is needed for setting Operating Mode Notification in AP mode from User Space. This functionality is required when User Space received Assoc Request contains Operation Mode Notification element. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [fix typos, nl80211 documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | | cfg80211/mac80211/ath6kl: acquire wdev lock outside ch_switch_notifySimon Wunderlich2013-12-021-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The channel switch notification should be sent under the wdev/sdata-lock, preferably in the same moment as the channel change happens, to avoid races by other callers (e.g. start/stop_ap). This also adds the previously missing sdata_lock protection in csa_finalize_work. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
OpenPOWER on IntegriCloud