summaryrefslogtreecommitdiffstats
path: root/net/wireless
Commit message (Collapse)AuthorAgeFilesLines
* nl80211: Add per peer statistics to compute FCS error rateAnkita Bajaj2018-10-121-0/+2
| | | | | | | | | | | | | | | | | | | | Add support for drivers to report the total number of MPDUs received and the number of MPDUs received with an FCS error from a specific peer. These counters will be incremented only when the TA of the frame matches the MAC address of the peer irrespective of FCS error. It should be noted that the TA field in the frame might be corrupted when there is an FCS error and TA matching logic would fail in such cases. Hence, FCS error counter might not be fully accurate, but it can provide help in detecting bad RX links in significant number of cases. This FCS error counter without full accuracy can be used, e.g., to trigger a kick-out of a connected client with a bad link in AP mode to force such a client to roam to another AP. Signed-off-by: Ankita Bajaj <bankita@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: use netlink policy validation function for elementsJohannes Berg2018-10-111-76/+46
| | | | | | | Instead of open-coding a lot of calls to is_valid_ie_attr(), add this validation directly to the policy, now that we can. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: use policy range validation where applicableJohannes Berg2018-10-111-289/+180
| | | | | | | | | Many range checks can be done in the policy, move them there. A few in mesh are added in the code (taken out of the macros) because they don't fit into the s16 range in the policy validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* lib80211: don't use skcipherJohannes Berg2018-10-102-71/+40
| | | | | | | Using skcipher just makes the code longer, and mac80211 also "open-codes" the WEP encrypt/decrypt. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg2018-10-084-21/+79
|\ | | | | | | | | | | | | Merge net-next, which pulled in net, so I can merge a few more patches that would otherwise conflict. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-062-7/+14
| |\
| | * cfg80211: fix use-after-free in reg_process_hint()Yu Zhao2018-10-011-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reg_process_hint_country_ie() can free regulatory_request and return REG_REQ_ALREADY_SET. We shouldn't use regulatory_request after it's called. KASAN error was observed when this happens. BUG: KASAN: use-after-free in reg_process_hint+0x839/0x8aa [cfg80211] Read of size 4 at addr ffff8800c430d434 by task kworker/1:3/89 <snipped> Workqueue: events reg_todo [cfg80211] Call Trace: dump_stack+0xc1/0x10c ? _atomic_dec_and_lock+0x1ad/0x1ad ? _raw_spin_lock_irqsave+0xa0/0xd2 print_address_description+0x86/0x26f ? reg_process_hint+0x839/0x8aa [cfg80211] kasan_report+0x241/0x29b reg_process_hint+0x839/0x8aa [cfg80211] reg_todo+0x204/0x5b9 [cfg80211] process_one_work+0x55f/0x8d0 ? worker_detach_from_pool+0x1b5/0x1b5 ? _raw_spin_unlock_irq+0x65/0xdd ? _raw_spin_unlock_irqrestore+0xf3/0xf3 worker_thread+0x5dd/0x841 ? kthread_parkme+0x1d/0x1d kthread+0x270/0x285 ? pr_cont_work+0xe3/0xe3 ? rcu_read_unlock_sched_notrace+0xca/0xca ret_from_fork+0x22/0x40 Allocated by task 2718: set_track+0x63/0xfa __kmalloc+0x119/0x1ac regulatory_hint_country_ie+0x38/0x329 [cfg80211] __cfg80211_connect_result+0x854/0xadd [cfg80211] cfg80211_rx_assoc_resp+0x3bc/0x4f0 [cfg80211] smsc95xx v1.0.6 ieee80211_sta_rx_queued_mgmt+0x1803/0x7ed5 [mac80211] ieee80211_iface_work+0x411/0x696 [mac80211] process_one_work+0x55f/0x8d0 worker_thread+0x5dd/0x841 kthread+0x270/0x285 ret_from_fork+0x22/0x40 Freed by task 89: set_track+0x63/0xfa kasan_slab_free+0x6a/0x87 kfree+0xdc/0x470 reg_process_hint+0x31e/0x8aa [cfg80211] reg_todo+0x204/0x5b9 [cfg80211] process_one_work+0x55f/0x8d0 worker_thread+0x5dd/0x841 kthread+0x270/0x285 ret_from_fork+0x22/0x40 <snipped> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: fix wext-compat memory leakStefan Seyfried2018-10-011-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cfg80211_wext_giwrate and sinfo.pertid might allocate sinfo.pertid via rdev_get_station(), but never release it. Fix that. Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> [johannes: fix error path, use cfg80211_sinfo_release_content(), add Fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-033-14/+65
| |\ \ | | |/ | | | | | | | | | | | | | | | Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| | * nl80211: Fix possible Spectre-v1 for CQM RSSI thresholdsMasashi Honma2018-09-271-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use array_index_nospec() to sanitize i with respect to speculation. Note that the user doesn't control i directly, but can make it out of bounds by not finding a threshold in the array. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [add note about user control, as explained by Masashi] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: Fix possible Spectre-v1 for NL80211_TXRATE_HTMasashi Honma2018-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | Use array_index_nospec() to sanitize ridx with respect to speculation. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: Address some corner cases in scan result channel updatingJouni Malinen2018-09-101-9/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cfg80211_get_bss_channel() is used to update the RX channel based on the available frame payload information (channel number from DSSS Parameter Set element or HT Operation element). This is needed on 2.4 GHz channels where frames may be received on neighboring channels due to overlapping frequency range. This might of some use on the 5 GHz band in some corner cases, but things are more complex there since there is no n:1 or 1:n mapping between channel numbers and frequencies due to multiple different starting frequencies in different operating classes. This could result in ieee80211_channel_to_frequency() returning incorrect frequency and ieee80211_get_channel() returning incorrect channel information (or indication of no match). In the previous implementation, this could result in some scan results being dropped completely, e.g., for the 4.9 GHz channels. That prevented connection to such BSSs. Fix this by using the driver-provided channel pointer if ieee80211_get_channel() does not find matching channel data for the channel number in the frame payload and if the scan is done with 5 MHz or 10 MHz channel bandwidth. While doing this, also add comments describing what the function is trying to achieve to make it easier to understand what happens here and why. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: reg: Init wiphy_idx in regulatory_hint_core()Andrei Otcheretianski2018-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since the regulatory request is zeroed, wiphy_idx was always implicitly set to 0. This resulted in updating only phy #0. Fix that. Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [add fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: sort tracing properlyJohannes Berg2018-10-021-134/+134
| | | | | | | | | | | | | | | | | | | | | There were supposed to be two blocks - one for each direction cfg80211 <-> driver, clean up the code to restore that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: unify sending NL80211_CMD_NEW_INTERFACEJohannes Berg2018-10-022-11/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | There isn't really any need for us to be sending this from two different places - move cfg80211_init_wdev() later and send the notification from there, removing it from the non- netdev case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: combine wdev/netdev unregister codeJohannes Berg2018-10-021-17/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | We currently have two places that do similar things, depending on whether it's a wdev with or without netdev. Combine the code to avoid having to duplicate all new additions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | nl80211: add error messages to nl80211_parse_chandef()Johannes Berg2018-10-021-22/+40
| | | | | | | | | | | | | | | | | | | | | | | | Add some error messages to nl80211_parse_chandef() to make failures here - especially with disabled channels - easier to diagnose. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: move cookie_counter out of wiphyJohannes Berg2018-10-022-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no reason for drivers to be able to access the cfg80211 internal cookie counter; move it out of the wiphy into the rdev structure. While at it, also make it never assign 0 as a cookie (we consider that invalid in some places), and warn if we manage to do that for some reason (wrapping is not likely to happen with a u64.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: regulatory: make initialization more robustJohannes Berg2018-10-021-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since my change to split out the regulatory init to occur later, any issues during earlier cfg80211_init() or errors during the platform device allocation would lead to crashes later. Make this more robust by checking that the earlier initialization succeeded. Fixes: d7be102f2945 ("cfg80211: initialize regulatory keys/database later") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | nl80211: remove nl80211_prepare_wdev_dump() skb argumentJohannes Berg2018-10-021-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nl80211_prepare_wdev_dump() is using the output skb to look up the network namespace, but this isn't really necessary, it can just as well use the input skb which is available as cb->skb, the sk is the same anyway. Therefore, remove the redundant argument. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu2018-10-023-5/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: tracing: reuse wiphy_wdev_evt for rdev_get_txq_statsJohannes Berg2018-10-021-11/+2
| | | | | | | | | | | | | | | | | | A simple cleanup, reuse the event definition that we already have. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | nl80211: Fix a GET_KEY reply attributeAndrew Zaborowski2018-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy. This is unlikely to affect existing userspace. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: combine duplicate wdev init codeJohannes Berg2018-10-023-26/+27
| | | | | | | | | | | | | | | | | | | | | There's a bit of duplicated code to initialize a wdev, pull it out into a separate function to call from both places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: remove redundant check of !scan_planColin Ian King2018-10-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The check for !scan_plan is redunant as this has been checked in the proceeding statement and the code returns -ENOBUFS if it is true. Remove the redundant check. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: remove unnecessary null pointer check in cfg80211_netdev_notifier_callzhong jiang2018-10-021-1/+1
|/ / | | | | | | | | | | | | | | The iterator in list_for_each_entry_safe is never null, therefore, remove the redundant null pointer check. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: validate wmm rule when settingStanislaw Gruszka2018-09-051-29/+35
| | | | | | | | | | | | | | | | Add validation check for wmm rule when copy rules from fwdb and print error when rule is invalid. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | ieee80211: add new VHT capability fields/parsingJohannes Berg2018-09-051-0/+109
| | | | | | | | | | | | | | | | IEEE 802.11-2016 extended the VHT capability fields to allow indicating the number of spatial streams depending on the actually used bandwidth, add support for decoding this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: add he_capabilities (ext) IE to AP settingsShaul Triebitz2018-09-051-0/+3
| | | | | | | | | | | | | | | | | | Same as for HT and VHT. This helps the lower level to know whether the AP supports HE. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-09-043-86/+22
|\ \ | |/
| * Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller2018-09-033-86/+22
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()Dan Carpenter2018-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IEArunk Khandavalli2018-08-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included. Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by: Arunk Khandavalli <akhandav@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: Pass center frequency in kHz instead of MHzHaim Dreyfuss2018-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | freq_reg_info expects to get the frequency in kHz. Instead we accidently pass it in MHz. Thus, currently the function always return ERR rule. Fix that. Fixes: 50f32718e125 ("nl80211: Add wmm rule attribute to NL80211_CMD_GET_WIPHY dump command") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [fix kHz/MHz in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * nl80211: Fix nla_put_u8 to u16 for NL80211_WMMR_TXOPHaim Dreyfuss2018-08-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TXOP (also known as Channel Occupancy Time) is u16 and should be added using nla_put_u16 instead of u8, fix that. Fixes: 50f32718e125 ("nl80211: Add wmm rule attribute to NL80211_CMD_GET_WIPHY dump command") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: make wmm_rule part of the reg_rule structureStanislaw Gruszka2018-08-282-82/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make wmm_rule be part of the reg_rule structure. This simplifies the code a lot at the cost of having bigger memory usage. However in most cases we have only few reg_rule's and when we do have many like in iwlwifi we do not save memory as it allocates a separate wmm_rule for each channel anyway. This also fixes a bug reported in various places where somewhere the pointers were corrupted and we ended up doing a null-dereference. Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [rephrase commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211: remove division by size of sizeof(struct ieee80211_wmm_rule)Johannes Berg2018-08-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pointer arithmetic already adjusts by the size of the struct, so the sizeof() calculation is wrong. This is basically the same as Colin King's patch for similar code in the iwlwifi driver. Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: clarify frames covered by average ACK signal reportBalaji Pothunoori2018-08-291-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the API to include all ACK frames in average ACK signal strength reporting, not just ACKs for data frames. Make exposing the data conditional on implementing the extended feature flag. This is how it was really implemented in mac80211, update the code there to use the new defines and clean up some of the setting code. Keep nl80211.h source compatibility by keeping the old names. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> [rewrite commit log, change compatibility to be old=new instead of the other way around, update kernel-doc, roll in mac80211 changes, make mac80211 depend on valid bit instead of HW flag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: Add support for 60GHz band channels 5 and 6Alexei Avshalom Lazar2018-08-283-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current support in the 60GHz band is for channels 1-4. Add support for channels 5 and 6. This requires enlarging ieee80211_channel.center_freq from u16 to u32. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is setRajeev Kumar Sirasanagandla2018-08-281-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When REGULATORY_COUNTRY_IE_IGNORE is set, __reg_process_hint_country_ie() ignores the country code change request from __cfg80211_connect_result() via regulatory_hint_country_ie(). After Disconnect, similar to above, country code should not be reset to world when country IE ignore is set. But this is violated and restore of regulatory settings is invoked by cfg80211_disconnect_work via regulatory_hint_disconnect(). To address this, avoid regulatory restore from regulatory_hint_disconnect() when COUNTRY_IE_IGNORE is set. Note: Currently, restore_regulatory_settings() takes care of clearing beacon hints. But in the proposed change, regulatory restore is avoided. Therefore, explicitly clear beacon hints when DISABLE_BEACON_HINTS is not set. Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | cfg80211/mac80211: make ieee80211_send_layer2_update a public functionDedy Lansky2018-08-281-0/+45
|/ / | | | | | | | | | | | | | | Make ieee80211_send_layer2_update() a common function so other drivers can re-use it. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-07-243-42/+29
|\ \ | |/
| * cfg80211: never ignore user regulatory hintAmar Singhal2018-07-241-25/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently user regulatory hint is ignored if all wiphys in the system are self managed. But the hint is not ignored if there is no wiphy in the system. This affects the global regulatory setting. Global regulatory setting needs to be maintained so that it can be applied to a new wiphy entering the system. Therefore, do not ignore user regulatory setting even if all wiphys in the system are self managed. Signed-off-by: Amar Singhal <asinghal@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * nl80211: Add a missing break in parse_station_flagsBernd Edlinger2018-07-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was looking at usually suppressed gcc warnings, [-Wimplicit-fallthrough=] in this case: The code definitely looks like a break is missing here. However I am not able to test the NL80211_IFTYPE_MESH_POINT, nor do I actually know what might be :) So please use this patch with caution and only if you are able to do some testing. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> [johannes: looks obvious enough to apply as is, interesting though that it never seems to have been a problem] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * nl80211/mac80211: allow non-linear skb in rx_control_portDenis Kenzior2018-07-062-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of cfg80211_rx_control_port assumed that the caller could provide a contiguous region of memory for the control port frame to be sent up to userspace. Unfortunately, many drivers produce non-linear skbs, especially for data frames. This resulted in userspace getting notified of control port frames with correct metadata (from address, port, etc) yet garbage / nonsense contents, resulting in bad handshakes, disconnections, etc. mac80211 linearizes skbs containing management frames. But it didn't seem worthwhile to do this for control port frames. Thus the signature of cfg80211_rx_control_port was changed to take the skb directly. nl80211 then takes care of obtaining control port frame data directly from the (linear | non-linear) skb. The caller is still responsible for freeing the skb, cfg80211_rx_control_port does not take ownership of it. Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API") Signed-off-by: Denis Kenzior <denkenz@gmail.com> [fix some kernel-doc formatting, add fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wireless/lib80211: Convert from ahash to shashKees Cook2018-07-241-25/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | In preparing to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash to direct shash. The stack allocation will be made a fixed size in a later patch to the crypto subsystem. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-07-031-21/+14
|\ \ | |/ | | | | | | | | | | | | | | | | Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
| * nl80211: check nla_parse_nested() return valuesJohannes Berg2018-06-291-5/+11
| | | | | | | | | | | | | | At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * nl80211: relax ht operation checks for meshBob Copeland2018-06-291-16/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Bob Copeland <bobcopeland@fb.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge tag 'mac80211-next-for-davem-2018-06-29' of ↵David S. Miller2018-06-306-55/+263
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Small merge conflict in net/mac80211/scan.c, I preserved the kcalloc() conversion. -DaveM Johannes Berg says: ==================== This round's updates: * finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud